4-087-135-32 (1)
R
GB
Instruction Manual
KF-50SX200U
KF-42SX200U
Ā©2003 by Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Thank you for choosing this Sony āGrand Wegaā model.
Before operating the TV set, please read this manual thoroughly and retain it for future reference.
ā¢ Symbols used in the manual:
ā¢
ā¢
Buttons shaded white on the remote control show the
buttons you have to press to follow the sequence
of instructions.
ā¢
ā¢
Important information.
Information on a feature.
ā¢ 1,2... Sequence of instructions.
Informs you of the result of the instructions.
Table of Contents
Notice for Customers in the United Kingdom .............................................................................................................................................................2
Introduction.......................................................................................................................................................................................................................3
Safety Information ............................................................................................................................................................................................................4
Overview
Checking the Accessories Supplied ..................................................................................................................................................................5
Overview of TV Buttons.....................................................................................................................................................................................5
Overview of Remote Control Buttons ..............................................................................................................................................................6
Installation
Inserting Batteries into the Remote Control ....................................................................................................................................................7
Connecting the Aerial and VCR........................................................................................................................................................................8
Stabilizing the TV set ..........................................................................................................................................................................................8
GB
First Time Operation
Switching on the TV set and Automatically Tuning......................................................................................................................................9
Menu System
Changing the Screen Format............................................................................................................................................................................11
Introducing and Using the Menu System......................................................................................................................................................11
On Screen display Menus Guide.....................................................................................................................................................................12
Using the Menu System:
Adjusting the Picture......................................................................................................................................................................................13
Adjusting the Sound.......................................................................................................................................................................................14
Using the Features menu...............................................................................................................................................................................16
Manually Tuning the TV ...............................................................................................................................................................................17
Labelling a channel.........................................................................................................................................................................................18
Skipping programme positions ....................................................................................................................................................................19
Using the āFurther Programme Presetā function ......................................................................................................................................20
Inputting your personal ID ...........................................................................................................................................................................21
Using the Demo Mode ...................................................................................................................................................................................22
Adjusting the H Centre picture for an RGB source ...................................................................................................................................23
Labelling and Selecting the screen format of Input Sources ....................................................................................................................24
Using Multi PIP (Picture In Picture) ............................................................................................................................................................25
Using PAP (Picture And Picture) .................................................................................................................................................................25
Teletext.......................................................................................................................................................................................................................26
NexTView .................................................................................................................................................................................................................28
Optional Connections
Connecting Optional Equipment ....................................................................................................................................................................30
Using Optional Equipment..............................................................................................................................................................................31
Smartlink.............................................................................................................................................................................................................32
Remote Control of other Sony Equipment.....................................................................................................................................................32
Additional Information
Remote Control Configuration for VCR/DVD.............................................................................................................................................33
Replacing the Lamp ..........................................................................................................................................................................................34
Optimum Viewing Area...................................................................................................................................................................................35
Specifications......................................................................................................................................................................................................36
Troubleshooting.................................................................................................................................................................................................37
Television Channel Number Guide for United Kingdom...........................................................................................................................38
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information
Safety Information
Never push objects of any kind into the set as
this could result in a ļ¬re or electric shock.
Never spill liquid of any kind on the set. If
any liquid or solid object does fall into the
cabinet, do not operate the TV. Have it
For environmental and safety reasons, it is
recommended that the TV set is not left in
standby mode when not in use. Disconnect
from the mains.
This set is to operate on a 220-240VAC supply
only. Take care not to connect too many
appliances to the same power socket as this
could result in ļ¬re or electric shock.
checked immediately by qualiļ¬ed personnel.
To prevent ļ¬re or shock hazard, do not expose
the TV to rain or moisture.
For your own safety, do not touch any part
of the TV, power lead or aerial lead during
lightning storms.
Do not open the cabinet and the rear cover of
the TV. Refer to qualiļ¬ed service personnel
only.
Never place the TV in hot, humid or
excessively dusty places. Do not install the
TV where it may be exposed to mechanical
vibrations.
To prevent ļ¬re, keep inļ¬ammable objects or
naked lights (eg candles) away from the TV.
Do not cover the ventilation openings of the
TV For ventilation, leave a space of at least
10cm all around the set.
Clean the screen and cabinet with a soft,
lightly dampened cloth. Do not use any type
of abrasive pad, alkaline cleaner, scouring
powder or solvent, such as alcohol or
benzine, or antistatic spray. As a safety
precaution, unplug the TV before cleaning it.
Pull out the power lead by the plug. Do not
pull on the power lead itself.
Take care not to place heavy objects on the
power lead as this could result in damage.
We recommend you wind any excess lead
around the holders provided on the rear of the
TV.
Place the TV on a secure stable stand. Do not
allow children to climb on to it. Do not place
the TV on its side or face up.
Unplug the power lead before moving the TV.
Avoid uneven surfaces, quick steps or
excessive force. If the set has been dropped or
damaged, have it checked immediately by
qualiļ¬ed service personnel.
Do not cover the ventilation openings of the
TV with items such as curtains or newspapers
etc.
Additional Safety Information
ā¢When moving the TV set two persons are needed. To prevent
damage DO NOT push on the speaker grills on each side of the
screen. Do not grasp the front panels to prevent these parts from
breaking off. Support the bottom of the screen with one hand
while grasping the top part with the other hand.
ā¢ This TV set incorporates the latest high-precision LCD technology.
Even though the highest standards are applied in manufacture it is
still possible that a few black dots or bright points (red, green or
blue) may be visible on the screen under certain picture conditions.
It is not possible to remove them and this is not a fault condition.
ā¢ The screen of this TV set has an anti-reflection screen coating. To
avoid screen degradation, follow the advice given below:
ā¢ To remove dust from the surface of the screen, wipe with the
supplied cleaning cloth or a soft cloth.
ā¢ Clean the screen and cabinet with a soft, lightly dampened cloth.
Do not use any type of abrasive pad, alkaline cleaner, scouring
powder or solvent, such as alcohol or benzine, or antistatic spray.
As a safety precaution, unplug the TV before cleaning it.
ā¢ Avoid touching the screen, and take care not to scratch the
surface with hard objects.
ā¢Do not block or cover the ventilation opening situated on the
bottom rear of the left hand side of the TV set. For ventilation,
leave a space of at least 10 cm from the wall.
ā¢If after transporting the TV set, directly from a cold to a warm
location, or if the room temperature has changed suddenly,
pictures may be blurred or show poor colour over portions of the
picture. This is because condensation has formed on the mirrors
or lenses inside the TV set. Let the moisture evaporate before
using the TV set.
ā¢To obtain a clear picture, do not expose the screen to direct
illumination or direct sunlight. If possible, use spot lighting
directed down from the ceiling.
Safety Information
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
Checking the Accessories Supplied
s
2 Brackets
1 Hexagon key
Two batteries
(AAA size)
1 Cleaning cloth
2 Screws
One Remote Control
(RM-905)
GB
Overview of TV Buttons
Lamp
indicator(see
page 34)
On/Off
Switch
Standby indicator:
ā¢ By pressing the On/
Off button on the
Remote Control to
turn the TV off, the
standby indicator
light up in red.
ā¢ By pressing the On/
Off on the TV set to
turn the TV off, the
standby indicator
lights up in amber.
Press on the mark
,
on the front of the TV
set to reveal the front
connectors.
Headphone
jack
S Video
Input jack
Video Input
jack
Volume control
buttons
Programme up
or down buttons
(selects TV channels)
Audio Input
jacks
Input source
selection
button
Overview
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
Overview of Remote Control Buttons
To Temporarily Switch Off:
Press to temporarily switch off TV (the standby indicator
on the TV set lights
Muting the Sound: Press to mute TV sound.
Press again to restore the sound.
up in red). Press again to switch on TV from standby mode.
After 15-30 minutes without a signal and without any button being pressed,
the TV set switches automatically into standby mode.
Selecting TV mode: Press to switch off PAP,
Multi PIP, Teletext or video input.
VCR DVD on/off: Press this button to switch
your VCR or DVD on or off.
Displaying the time: Press to switch the time
display on or off (available only when teletext is
broadcast).
Selecting Input source: Press this button
repeatedly until the input of the desired source
appears on the TV screen.
Displaying On Screen Information: Press
to display all on-screen indications. Press again to
cancel.
Selecting channels:
If Media Selector is switched to TV or VCR, press
this button to select channels.
For double-digit programme numbers, enter the
second digit within 2.5 seconds.
Media Selector:
With this remote control you can operate not
only this TV but also the main functions of
your VCR or DVD.
a) If Media Selector is switched to TV:
Press this button to watch the last channel
selected (the last channel watched for at least 5
seconds).
b) If Media Selector is switched to VCR:
To select a double-digit programme on a Sony
VCR, e.g. 23, press -/- - first and then the
buttons 2 and 3.
Switch on the device you want to operate and next
press this button repeatedly to select the VCR, TV
or DVD. A green light will be momentarily lit to
indicate the chosen function.
Before the first time you want to control
a DVD or VCR by using this remote
control, you have to set it up depending on the
brand of the device to be used. For more details,
refer to chapter āRemote Control Configuration
for VCR or DVDā on page 33.
a) Recording button:
If Media Selector is switched to VCR, press this
button to record programmes.
a) PAP (Picture And Picture):
For more details, please refer to the section
āUsing PAP (Picture And Picture)ā.
b) Teletext:
b) Resetting to factory set levels:
Press, for a minimum of 3 seconds, to return the
picture and sound settings to the factory default
levels. This will also return the set to the install
condition and the āAuto Tuningā menu will
appear on the screen. If this is the case refer to the
section āSwitching on the TV set and
Buttons with green symbols are also used for
teletext operation. For more details, please
refer to the section āTeletextā of this manual.
NexTView:
For more details, please refer to the section
āNexTViewā of this manual.
automatically Tuningā (step 4) of this manual.
Freezing the picture: Press this button to
freeze the picture. Press again to return to the
normal picture.
Joystick:
a) If Media Selector is switched to TV:
ā¢When MENU is switched on, use these
buttons to operate the menu system. For
details refer to āIntroducing and Using
the Menu Systemā on page 11.
Selecting Screen format: Press this button
repeteadly to change the format of the screen (for
more details, please refer to the section āChanging
the Screen formatā) of this manual.
ā¢ When MENU is switched off, press OK to
show an overview of all TV channels. Then
press
or
to select the channel and
button to watch the selected
Displaying Multi PIP (Picture In Picture):
Press to display Multi PIP mode. Press again to
cancel. For more details, please refer to the section
āUsingMulti PIP (Picture In Picture)ā.
then press
channel.
b) If Media Selector is switched
to VCR or DVD:
a) Selecting channels: Press this button to
select the number of the next or previous
broadcast channel.
b) Teletext: These buttons are also used for
teletext operation. For more detail please refer to
the section āTeletextā of this manual.
Using these buttons you can control
the main functions of your VCR or DVD.
Fastext: These buttons are also used for
Fastext operation. For more details please refer
to the āFastextā chapter in the āTeletextā
section of this manual.
Displaying the menu system: Press this
button to display the menu on the screen. Press
again to remove the menu display from the screen.
Selecting Sound effect: Press this button
repeatedly to change the sound effect.
Selecting Picture mode: Press this button
repeatedly to change the picture mode.
Adjusting TV Volume: Press
this button to adjust the volume
of the TV.
6
Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Inserting Batteries into the Remote Control
Always remember to dispose of used batteries in an environmental friendly way.
GB
Make sure you insert the batteries using
the correct polarities.
Installation
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Connecting the Aerial and VCR
Connecting cables are not supplied.
or
OUT
IN
VCR
The Scart lead is optional, however if you use a Scart lead to connect your VCR it can improve picture and sound quality
when using it.
If you do not use a Scart lead, after automatically tuning the TV set, refer to the "Manually Tuning the TV" section of this
instruction manual, to tune in the set to the output of your VCR. Also, refer to your VCR instruction manual to find the
output channel of your VCR.
Stabilizing the TV set the set
After setting up, secure the TV set to a wall, etc., using the supplied brackets and screws, for safety purposes.
1 Mount the two supplied brackets with the screws provided to the upper rear side of the TV set.
Do not block or cover this ventilation opening. For
ventilation, leave a space of at least 10 cm from the wall.
2 Pass a strong cord or a chain through each bracket, and then secure to a wall or a pillar, etc.
8
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
First Time Operation
Switching on the TV set and Automatically Tuning
The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to 1) choose the language
of the menu screen, 2) choose the country in which you wish to operate the TV set, 3) search and store all available broadcast
channels and 4) change the order in which the broadcast channels appear on the screen.
However, if you need to change any of these settings at a later date, you can do that by selecting the appropriate option in the
(Set Up) menu.
Language/Country
1 Connect the TV plug to the mains socket (220-240V AC, 50 Hz).
4
Italiano
FranƧais
EspaƱol
English
Deutsch
Dansk
Language/Country
4
Italiano
FranƧais
EspaƱol
English
Deutsch
Dansk
The first time that the TV set is connected, it is usually turned on. If the
Language
Country
ÄeÅ”tina
Language
Country
Select Language:
Confirm: OK
ÄeÅ”tina
TV is off, press the
On/Off button on your TV set to switch it on.
Select Language:
Confirm: OK
The first time you switch on the TV, the Language/Country menu is
automatically displayed on the screen.
2 Push the joystick on the remote control
or
to confirm your selection. From now on all
the menus will appear in the selected language.
to select the
Language/Country
4
Italiano
FranƧais
EspaƱol
English
Deutsch
Dansk
language, then press
Language
Country
ÄeÅ”tina
Select Language:
Confirm: OK
Language/Country
GB
3 Push the joystick
or
to select the country in which you will
to confirm your selection.
4
Finland
Denmark
Czech Rep.
Bulgaria
Belgium
Austria
operate the TV set, then press
Language
Country
Off
Select Country:
Confirm: OK
Select "Off" instead of a country if you do not want the
broadcast channels stored in the normal channel sequence
starting from programme position 1 (i.e. BBC1= programme 1,
BBC2= programme 2...).
Do you want to start
automatic tuning?
4 The Auto Tuning menu appears on the screen in the selected
Yes: OK No:
language, then press the
button on the remote control to select
Yes.
Please confirm that
aerial is connected!
5 A new menu appears automatically on the screen asking you to
check that the aerial is connected. Confirm that the aerial is connected
and then press the button to start the automatic tuning.
Yes: OK
No:
ā¢ The TV starts to automatically search and store all available
broadcast channels for you.
ā¢ If you have selected the āOffā option in the Country menu and
you activate autotuning, the broadcast channels will be stored
in the order in which they are received and no sorting will
take place.
1
2
3
4
5
CO2
CO3
CO4
CO7
CO8
Searching...
This procedure could take some minutes. Please, be patient and
do not press any buttons while the automatic tuning is in
progress, otherwise the automatic tuning will
not be completed.
continued...
9
First Time Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
First Time Operation
6
After all available broadcast channels are captured and stored,
the Programme Sorting menu appears automatically on the
screen enabling you to change the order in which the channels
appear on the screen.
a) If you wish to keep the broadcast channels in the tuned order, go to
step 7.
Programme Sorting
PROG CH
LABEL
1
2
3
4
5
6
7
8
9
C03 TV 5
C05 PRO 7
C07 EU-SP
C08 SWF
C09 RTL
C11 SAT
C12 MDR
C13 DDI
b) If you wish to store the broadcast channels in a different order:
C14 DSF
10 C15 RTL 2
11 C16 KAB 1
1Push the joystick on the remote control
or
to select the
Select Prog:
Confirm:
programme number with the broadcast channel you wish to
rearrange, then push
2 Push the joystick or
to enter.
Programme Sorting
to select the new programme number
PROG CH
LABEL
1
2
3
4
5
6
7
8
9
C03 TV 5
C03 TV 5
for your selected broadcast channel, then press
.
C05 PRO 7
C07 EU-SP
C08 SWF
C09 RTL
C11 SAT
C12 MDR
C13 DDI
C14 DSF
10 C15 RTL 2
11 C16 KAB 1
The selected broadcast channel now moves to its new
programme position and the other broadcast channels move
accordingly.
Select Position:
Move: OK
3Repeat steps b1) and b2) if you wish to change the order of the
other channels.
7 Press the
button to exit and return to the normal TV screen.
The TV set is now ready for use.
10
First Time Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu System
Changing the Screen Format
This feature allows you to change the size of the TV picture.
1 Press the
button on the remote control repeatedly to select one
of the following formats.
Smart
Wide
Zoom
Smart:
4:3:
imitation of wide screen effect for 4:3 broadcast.
conventional 4:3 picture size, full picture information.
compromise between 4:3 and 16:9 picture size.
widescreen format for letterbox movies.
14:9:
Zoom:
Wide:
for 16:9 broadcast, full picture information.
In Smart, Zoom and 14:9 modes parts of the top and bottom of the
screen are cut off. Press or to adjust the position of the image on
screen (eg to read subtitles).
14:9
4:3
2 Press the
button to confirm your selection.
GB
Introducing and Using the Menu System
Your TV set uses an on-screen menu system to guide you through the operations. Use the following buttons on the
Remote Control to operate the menu system:
1 Press the
button to switch the main menu on.
Picture Adjustment
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
AI
Personal
Picture Adjustment
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
AI
Personal
On
Off
Noise Reduction
Colour Tone
Normal
On
Off
Normal
Select:
Enter Menu:
Noise Reduction
Colour Tone
Select:
Enter Menu:
Joystick:
2 ā¢To higlight the desired menu or option, push the joystick
or
.
ā¢To enter to the selected menu or option, push
ā¢To return to the last menu or option, push
ā¢To alter settings of your selected option, push
ā¢To confirm and store your selection, press
.
.
/
/
or
.
push
/
/
or
press OK
3 Press the
button to remove the menu from the screen.
Menu System
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu System
On Screen display Menus Guide
Picture Adjustment
Picture Adjustment
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
AI
Personal
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
AI
Personal
Refer to the section
"Adjusting the Pictureā
On
Off
On
Off
Normal
Noise Reduction
Colour Tone
Noise Reduction
Colour Tone
Normal
Select:
Enter:
Select:
Enter Menu:
Audio Adjustment
Audio Adjustment
Sound Effect
Equaliser
Personal
Sound Effect
Equaliser
Personal
Adjustment
Virtual Effect
Balance
Auto Vol. Control
Dual Sound
Volume
Adjustment
Virtual Effect
Balance
Auto Vol. Control
Dual Sound
Volume
.
0
.
0
Refer to the section
"Adjusting the Soundā
Off
Off
0
Mono
0
Mono
Mono
Dual Sound
0
Dual Sound
Mono
0
Select:
Enter Menu:
Select:
Enter:
Features
Speaker
Features
Speaker
Auto Format
Format Correction
Sleep Timer
Parental Lock
AV3 Output
Main
Main
Refer to the section
"Using the features
menuā
Normal
On
Off
Off
TV
Auto Format
Normal
On
Off
Off
TV
Format Correction
Sleep Timer
Parental Lock
AV3 Output
Select:
Enter:
Select:
Enter Menu:
Set Up
Set Up
Refer to the section
"Switching on the TV
set and Automatically
Tuning"
Auto Tuning
Start
Auto Tuning
Do you want to start
automatic tuning?
Programme Sorting
Select NexTView
AV Preset
Programme Sorting
Select NexTView
AV Preset
- - - - - - -
- - - - - - -
Manual Set Up
Manual Set Up
Yes: OK
No:
Select:
Enter Menu:
Select:
Start Auto Tuning
Programme Sorting
Set Up
PROG CH
LABEL
Auto Tuning
1
2
3
4
5
6
7
8
9
C03 TV 5
Refer to the section
"Switching on the TV
set and Automatically
Tuning"
C05 PRO 7
C07 EU-SP
C08 SWF
C09 RTL
C11 SAT
C12 MDR
C13 DDI
Programme Sorting
Select NexTView
AV Preset
- - - - - - -
Manual Set Up
C14 DSF
10 C15 RTL 2
11 C16 KAB 1
Select:
Enter:
Select Prog:
Confirm:
Set Up
Auto Tuning
Programme Sorting
Select NexTView
AV Preset
Refer to the
section
- - - - - - -
- - - - - - -
- - - - - - -
Manual Set Up
āNexTViewā
Select:
Enter:
Manual Set Up
Language/Country
Manual Programme Preset
Further Programme Preset
RGB Set Up
Personal ID
Demo
Refer to the section
"Switching on the TV
set and Automatically
Tuning"
Set Up
Refer to the
section
- - - - - - -
Auto Tuning
Programme Sorting
Select NexTView
AV Preset
"Labelling and
selecting the
screen format
of Input
Select:
Enter:
Manual Set Up
Select:
Enter:
Manual Set Up
Refer to the sections
"Manually Tuning the
TV", "Labelling a
channel"and"Skipping
programme positions"
Language/Country
Manual Programme Preset
Further Programme Preset
RGB Set Up
Personal ID
Demo
Sourcesā
Set Up
- - - - - - -
Auto Tuning
Programme Sorting
Select NexTView
AV Preset
Select:
Enter:
Manual Set Up
Select:
Enter:
Manual Set Up
Language/Country
Refer to the section
"Using the Further
Programme Preset
function"
Manual Programme Preset
Further Programme Preset
RGB Set Up
Personal ID
Demo
- - - - - - -
Select:
Enter:
Manual Set Up
Language/Country
Manual Programme Preset
Further Programme Preset
RGB Set Up
Personal ID
Demo
Refer to the section
"Adjusting the H centre
picture for an RGB
source"
- - - - - - -
Select:
Enter:
Manual Set Up
Language/Country
Manual Programme Preset
Further Programme Preset
RGB Set Up
Refer to the section
"Inputting your
personal ID"
- - - - - - -
Personal ID
Demo
Select:
Enter:
Manual Set Up
Teletext
Language/Country
Top / Bottom / Full
Text Clear
Reveal
Time Page
Page Overview
Manual Programme Preset
Further Programme Preset
RGB Set Up
Personal ID
Demo
Refer to the section
"Using the Demo
Mode"
Refer to the
section "Teletext"
- - - - - - -
Start
Select:
Enter:
Select:
Enter:
Menu System
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu System
Adjusting the Picture
Although the picture is adjusted at the factory, you can modify it to suit your own taste.
Picture Adjustment
1 Press the
button on the remote control to display the menu
Picture Mode
Contrast
Brightness
Colour
Personal
on the screen.
Sharpness
Reset
AI
Noise Reduction
Colour Tone
2 Push the joystick
3 Push the joystick
to enter the Picture Adjustment menu.
On
Off
Normal
or
to enter.
See the table below for the effect of each menu item:
to select the item you wish to change,
Select:
Enter Menu:
then push
Picture Adjustment
Picture Mode
Contrast
Personal
Brightness
Colour
Sharpness
Reset
Picture Mode
Live (for live broadcast programmes)
Personal (for individual settings)
Movie (for films)
AI
On
Off
Normal
Noise Reduction
Colour Tone
Game (for computer games)
Select:
Enter:
Contrast
Less
More
Brightness*
Colour*
Darker
Less
Softer
Reddish
Brighter
More
Sharper
Greenish
Live
Personal
Movie
Game
GB
Picture Mode
Sharpness*
Hue**
Reset
AI (Artificial
Intelligence)
Resets picture to the factory preset levels.
Off: Normal
On: Automatic optimization of contrast level
according to the TV signal
Contrast
Noise
Reduction
High: High noise reduction.
Mid: Medium noise reduction.
Low: Low noise reduction.
On
Off
AI
Auto: Optimum noise reduction automatically
selected. (This option is not available
when viewing an RGB source).
Off: No noise reduction.
High
Mid
Low
Auto
Off
Noise Reduction
Colour Tone
Colour Tone
Warm: Gives a warm tint to the picture.
---Normal: Normal.
Warm
Normal
Cool
Cool:
Gives a cool tint to the picture.
*
Can only be altered if Personal Picture Mode is selected.
** Only avalaible for NTSC colour signal (e.g: USA video tapes).
4 Push the joystick
,
,
or
to alter the selected item, then
press the
button to store the new adjustment.
5 Repeat steps 3 and 4 to alter the other items.
6 Press the
button to exit and return to the normal TV screen.
Changing the Picture Mode Quickly
You can quickly change the Picture Mode without entering the
Picture Control menu screen.
1 Press the
button on the remote control repeatedly to directly
Live
Personal
Movie
access and select your desired picture mode (Live, Personal, Movie,
Picture Mode
or Game).
Game
2 Press the
button to remove the display from the screen.
Menu System
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu System
Adjusting the Sound
Although the sound is adjusted at the factory, you can modify it to suit your own taste.
Picture Adjustment
1 Press the
button on the remote control to display the menu
Picture Mode
Contrast
Brightness
Colour
Personal
on the screen.
Sharpness
Reset
AI
Noise Reduction
Colour Tone
2 Push the joystick
to select the symbol, then push
enter to the Audio Adjustment menu.
to
On
Off
Normal
Select:
Enter Menu:
3 Push the joystick or to select the item you wish to change,
then push to enter.
See the table below for the effect of each menu item:
Audio Adjustment
Sound Effect
Equaliser
Personal
Adjustment
Virtual Effect
Balance
Sound Effect
Personal: No special acoustic effects.
.
0
Dolby* V: Dolby Virtual, simulates the sound
effect of āDolby Surround Pro Logicā.
Auto Vol. Control
Off
Dual Sound
Volume
0
Mono
Dual Sound
Mono
0
Dynamic: āBBE High Definition Sound systemā**
intensifies clarity and presence of sound for better
intelligibility and musical realism.
Select:
Enter:
Personal
Dolby V
Dynamic
Audio Adjustment
Natural: Enhances clarity, detail and presence of
sound by using āBBE High Definition Sound
systemā**.
Natural
Sound Effect
Equaliser
Adjustment
Virtual Effect
Balance
.
0
Off
Auto Vol. Control
Dual Sound
Volume
Dual Sound
0
Mono
Equaliser
Adjustment
Push to
want to alter and push to
press the button to store the new adjustment.
(Only available if āSound Effectā is set to āPersonalā)
or
to select the frequency band you
or to adjust. Finally,
0
Mono
Select Mode:
Confirm: OK
Equaliser Adjustment
(Personal)
Virtual Effect
Push to
or
to change the level of surround sound
+
0
ā
effect when listening to a Dolby surround sound
broadcast. (Only available when āSound Effectā is set to
āDolby Vā).
120
Sel:
500
1,5K 5 K
10 K
Adjust:
Confirm:OK
Balance
Left
Right
Auto Vol.
Control
Off: volume level changes according to the
broadcast signal
On: volume level of the channels will stay the
same independent of the broadcast signal
(e.g. in case of advertisement)
Virtual Effect
Balance
.
Dual Sound
ā¢ For a stereo broadcast:
Off
On
Auto Vol. Control
Mono
Stereo
Mono
A
B
ā¢ For a bilingual broadcast:
Mono (for mono channel if available)
A (for channel 1)
Dual Sound
Volume
B (for channel 2)
B
A
Headphones:
When listening to the TV through the headphones, special sound
effects are disabled.
Dual Sound
l Volume
Less
More
l Dual Sound
ā¢ For a stereo broadcast:
Mono
Stereo
ā¢ For a bilingual broadcast:
Mono (for mono channel if available)
A (for channel 1)
B (for channel 2)
PAP (only when PAP is switched on)
continued...
14
Menu System
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu System
4 Push the joystick
/
/
or to alter the selected item, then
press the button to store the new adjustment.
5 Repeat steps 3 and 4 to alter the other items.
6 Press the
button to exit and return to the normal TV screen.
*This TV has been designed to create the āDolby Surroundā sound
effect by simulating the sound of four speakers with two speakers.
This sound effect will only operate when the broadcast audio
signal is Dolby Surround encoded.
* Manufactured under license from Dolby Laboratories. āDolbyā,
GB
āPro Logicā and the double-D symbol
Laboratories.
are trademarks of Dolby
** The āBBE High Definition Sound systemā is manufactured by
Sony Corporation under license from BBE Sound, Inc. It is
covered by U.S. Patent No. 4,638,258 and No. 4,482,866. The
word āBBEā and BBE Symbol are trademarks of BBE Sound, Inc.
Changing Sound Mode Quickly
You can quickly change Sound mode without entering the Sound
Control menu screen.
Personal
Dolby V
Dynamic
Natural
1 Press the
button on the remote control repeatedly to directly
access and select your desired sound mode (Personal, Dolby V,
Sound Effect
Dynamic or Natural).
2 Press the
button to remove the display from the screen.
Menu System
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu System
Using the Features Menu
Using the Features menu you can:
a) Select if you want to listen to the sound from the TV set directly or through an external amplifier.
b) Automatically adjust the size of picture.
c) Select a time period after which the TV set switches itself into standby mode.
d) Lock the buttons on the TVset. In this way, the TV set only works by using the remote control buttons.
e) Select the source to be output from the Scart connector :3/q3 (SMARTLINK). In this way you can record from this scart
connector while watching another source. If your VCR supports Smartlink, this procedure is not necessary.
Picture Adjustment
1 Press the
on the screen.
button on the remote control to display the menu
Picture Mode
Contrast
Brightness
Colour
Personal
Sharpness
Reset
AI
Noise Reduction
Colour Tone
2 Push the joystick to select the
symbol, then push
to
On
Off
Normal
enter the Features menu.
Select:
Enter Menu:
3 Push the joystick
or
to select the desired menu item, then
Features
Speaker
push to enter (see the table below for the effect of each menu item).
Main
Normal
On
Off
Off
TV
Auto Format
Format Correction
Sleep Timer
Parental Lock
AV3 Output
4 Push or to select the desired setting and press the
button
to store.
Select:
Enter:
5 Press the
button to exit and return to the normal TV screen.
Features
Speaker
Effect / Operation
Main (sound from the TV set)
Centre In (sound from external amplifier)
Main
Centre In
Speaker
Auto Format
(only for aerial
signal)
Off: Size of picture is not automatically adjusted.
Normal: Size of picture is automatically adjusted
according to the broadcaster information.
Auto Format
Off
Normal
Full
Full: The TV set automatically adjusts the picture
size to eliminate any dark areas on the TV picture.
Format Correction
(only if Auto Format
is set to āNormalā
or āFullā)
Off: 4:3/14:9 is selected.
On: Smart mode is selected automatically for
4:3/14:9 broadcast.
Format Correction
Off
On
Sleep Timer
Off
10 min.
20 min.
10 min
Sleep Timer
.
.
.
90 min.
ā¢ One minute before the TV set switches into
standby mode, the time remaining is displayed
on the screen automatically.
ā¢When watching the TV, press the
button
on the remote control to display the time
remaining.
ā¢To return to normal operation from standby
mode, press the TV
control.
button on the remote
Parental Lock
AV3 Output
Off (Normal mode)
On (The TV set can only be switched on using the
remote control, the buttons on the TV do not
work)
Off
On
Parental Lock
AV3 Output
TV (audio/video signal from the aerial)
AV1 (audio/video signal from the Scart
TV
AV1
AV2
AV3
AV4
connector :1/
1).
AV2 (audio/video signal from the Scart
connector :2/ 2).
AV3 (audio/video signal from the Scart
connector :3/q3 (SMARTLINK)).
AV4 (audio/video signal from the connector ā¦4
placed in the front of the TV set).
If you have connected a decoder, please
remember to change the AV3 Output back to
"TV" for correct unscrambling.
16
Menu System
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu System
Manually Tuning the TV
Use this function to preset channels (TV Broadcast) or a video input source one by one to the programme order of your choice.
Picture Adjustment
1 Press the
button on the remote control to display the
menu on the screen.
Picture Mode
Contrast
Brightness
Colour
Personal
Sharpness
Reset
AI
Noise Reduction
Colour Tone
2 Push the joystick to select the
symbol, then push
to
On
Off
Normal
enter the Set Up menu.
Select:
Enter Menu:
Set Up
3 Push the joystick or to select Manual Set Up, then push
Auto Tuning
Start
Programme Sorting
Select NexTView
AV Preset
to enter.
- - - - - - -
Manual Set Up
4 Push the joystick to or to select Manual Programme Preset,
Select:
Start Auto Tuning
then push
to enter.
Set Up
Auto Tuning
Programme Sorting
Select NexTView
AV Preset
5 Push the joystick or to select which programme number
you want to preset a channel on (for VCR select programme
number "0"), then push twice . The column SYS is highlighted.
- - - - - - -
Manual Set Up
GB
Select:
Enter:
Manual Set Up
6 Push the joystick or to select the system for TV Broadcast
and VCR channel (B/G for western european countries, L for
France, I for Great Britain or D/K for eastern european countries)
or a external input source (EXT), then push . The column CH
is highlighted.
Language/Country
Manual Programme Preset
Further Programme Preset
RGB Set Up
Personal ID
Demo
- - - - - - -
Select:
Enter:
Manual Programme Preset
PROG SKIP
SYS CH
LABEL
7 Push the joystick or to select the channel tuning, "C" for
1
2
3
4
5
6
7
8
9
Off
Off
Off
Off
Off
Off
Off
Off
Off
B/G
B/G
C09 ARD
C10 BBC
terrestrial channels (for TV Broadcast or VCR channel), "S" for
cable channels or "F" for direct frequency input then push
.
10 Off
11 Off
Select:
Enter:
CH
PROG
1
SKIP
SYS
LABEL
Off
8 a) If you know the channel number of the TV Broadcast, the VCR
B/G
L
I
test signal channel or the frequency, press the number buttons
D/K
EXT
to enter the channel number directly. Then press the
to store.
button
PROG
1
SKIP
Off
SYS
B/G
CH
LABEL
LABEL
b) If you do not know the channel number, push the joystick
to select SEARCH and the TV set starts to search automatically
for the next available TV Broadcast channel or the channel of the
C
S
F
- -
PROG
1
SKIP
Off
SYS
B/G
CH
VCR signal. Then press the
button to store or push to
03
C
SEARCH
continue searching for the desired channel.
c) For external input sources (EXT), push to select the input
source to which you have connected your equipment (AV1,
PROG
3
SKIP
Off
SYS
EXT
CH
LABEL
AV1
AV2
AV3
AV4
AV2, AV3 or AV4). Then press the
button to store.
9 Repeat steps 4 to 8 a), b) or c) if you wish to store more channels.
10 Press the button to exit and return to the normal TV screen.
The TV set is now ready for use.
Menu System
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu System
Labelling a channel
Names for channels (TV Broadcasts) are usually taken automatically from Teletext if available. You can however name a channel or
an input video source using up to five characters (letters or numbers). Using this function, you can easily identify which channel
(TV Broadcasts) or video source you are watching.
Picture Adjustment
1 Press the
button on the remote control to display the
menu on the screen.
Picture Mode
Contrast
Brightness
Colour
Personal
Sharpness
Reset
AI
On
Off
Normal
Noise Reduction
Colour Tone
Select:
Enter Menu:
Set Up
2 Push the joystick to select the
symbol, then push
to
Auto Tuning
Start
Programme Sorting
Select NexTView
AV Preset
enter the Set Up menu.
- - - - - - -
Manual Set Up
Select:
Start Auto Tuning
Set Up
3 Push the joystick or to select Manual Set Up, then push
Auto Tuning
Programme Sorting
Select NexTView
AV Preset
to enter.
- - - - - - -
Manual Set Up
Select:
Enter:
Manual Set Up
4 Push the joystick or to select Manual Programme Preset,
Language/Country
Manual Programme Preset
Further Programme Preset
RGB Set Up
Personal ID
Demo
then push
to enter.
- - - - - - -
Select:
Enter:
Manual Programme Preset
5 Push the joystick or to select the programme number with
PROG SKIP
SYS CH
LABEL
1
2
3
4
5
6
7
8
9
Off
Off
Off
Off
Off
Off
Off
Off
Off
B/G
B/G
C09 ARD
C10 BBC
the channel you wish to name.
10 Off
11 Off
Select:
Enter:
6 Push the joystick repeatedly until the first element of the
PROG
1
SKIP
Off
SYS
B/G
CH
LABEL
A
C 03
LABEL column is highlighted.
7 Push the joystick or to select a letter, number, "+" or a
blank, then push
to confirm this character. Select the other
four characters in the same way.
8 After selecting all the characters, press the
button.
9 Repeat steps 5 to 8 if you wish to label other channels.
10 Press the
button to exit and return to the normal TV
screen.
When you select a named channel, the name will appear for a few seconds.
18 Menu System
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu System
Skipping Programme positions
You can programme this TV set to skip any unused programme numbers when they are selected with the PROG +/- buttons.
To cancel this function afterwards, proceed in the same way as described below but by selecting Off instead of On in step 6.
Picture Adjustment
1 Press the
on the screen.
button on the remote control to display the menu
Picture Mode
Contrast
Brightness
Colour
Personal
Sharpness
Reset
AI
On
Off
Normal
Noise Reduction
Colour Tone
Select:
Enter Menu:
Set Up
2 Push the joystick to select the
symbol, then push
to
Auto Tuning
Start
Programme Sorting
Select NexTView
AV Preset
enter the Set Up menu.
- - - - - - -
Manual Set Up
Select:
Start Auto Tuning
Set Up
Auto Tuning
3 Push the joystick or to select Manual Set Up, then push
to
Programme Sorting
Select NexTView
AV Preset
- - - - - - -
enter.
Manual Set Up
GB
Select:
Enter:
Manual Set Up
4 Push the joystick or to select Manual Programme Preset,
Language/Country
Manual Programme Preset
Further Programme Preset
RGB Set Up
Personal ID
Demo
then push
to enter.
- - - - - - -
Select:
Enter:
Manual Programme Preset
5 Push the joystick or to select the programme position you
want to skip, then push to enter the SKIP column.
PROG SKIP
SYS CH
LABEL
1
2
3
4
5
6
7
8
9
Off
Off
Off
Off
Off
Off
Off
Off
Off
B/G
B/G
C09 ARD
C10 BBC
10 Off
11 Off
Select:
Enter:
PROG
1
SKIP
SYS
B/G
CH
LABEL
ARD
6 Push the joystick to select On, then press the
button to
C 09
Off
On
store.
7 Repeat steps 5 and 6 to skip other unused programme positions.
8 Press the
button to exit and return to the normal TV screen.
When changing channels (TV Broadcasts) with the PROG +/- buttons,
the skipped programme positions do not appear. You can, however, still
select them using the number buttons.
Menu System
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu System
Using the "Further Programme Preset" function
With this feature you can:
a) Individually attenuate the strength of a channel signal in case there is a strong local aerial signal (characteristically a striped
picture).
b) Individually adjust the volume level of each channel.
c) Normally the automatic fine tuning (AFT) will operating, however you can manually fine-tune the TV to obtain better
reception if the picture is distorted.
d) Preset the AV output for the programme positions of channels with scrambled signals (eg from a pay TV decoder). In this way
a connected VCR records the unscrambled signal.
Picture Adjustment
1 Press the
on the screen.
button on the remote control to display the menu
Picture Mode
Contrast
Brightness
Colour
Personal
Sharpness
Reset
AI
On
Off
Normal
2 Push the joystick to select the
symbol, then push to enter the
Noise Reduction
Colour Tone
Set Up menu.
Select:
Enter Menu:
Set Up
3 Push the joystick or to select Manual Set Up then push to
Auto Tuning
Start
Programme Sorting
Select NexTView
AV Preset
- - - - - - -
to enter.
Manual Set Up
Select:
Start Auto Tuning
4 Push the joystick or to select Further Programme Preset,
then push to
to enter.
Set Up
Auto Tuning
Programme Sorting
Select NexTView
AV Preset
- - - - - - -
5 Push the joystick or to select the relevant programme number,
then push repeatedly to select:
Manual Set Up
Select:
Enter:
a) ATT (RF attenuator)
b) VOL (Volume Offset)
c) AFT (Automatic Fine Tuning) or
d) DECODER
Manual Set Up
Language/Country
Manual Programme Preset
Further Programme Preset
RGB Set Up
Personal ID
Demo
- - - - - - -
Select:
Enter:
Further Programme Preset
PROG ATT VOL AFT DECODER
6 a) ATT
1
2
Off
Off
Off
0
0
0
On
On
On
Off
Off
Off
3
Push the joystick to select On, then press the
button.
4
5
6
7
Repeat steps 5 and 6 a) to attenuate other channels.
8
9
10
11
b)VOL
Push the joystick or to adjust the volume level of the channel
over a range of -7 to +7, then press the button. Repeat steps 5
and 6b) to adjust the volume level of the other channels.
Select:
Enter:
PROG
1
ATT
VOL
AFT DECODER
Off
On
c) AFT
Push the joystick or to fine tune the channel frequency over
a range of -15 to +15, then press the button. Repeat steps 5 and
PROG
1
ATT
On
VOL
- 5
AFT DECODER
6c) if you wish to fine tune other channels.
PROG
1
ATT
On
VOL
-5
AFT DECODER
2
d)DECODER
Push the joystick or to select AV1 (for a decoder connected
PROG
1
ATT
On
VOL
-5
AFT DECODER
to the Scart :1/
1) or AV3 (for a decoder connected to the
button.
Off
AV1
AV3
2
Scart :3/q3 (SMARTLINK)), then press the
Repeat steps 5 and 6d) to select the AV1 or AV3 output for other
programme positions.
The picture from the decoder connected to the Scart connector
:1/
1 or :3/q3 (SMARTLINK) on the back of the
set will appear on the selected programme number.
7 Press the
button to exit and return to the normal TV screen.
The TV set is now ready for use.
20
Menu System
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu System
Inputting Your Personal ID
You can programme this TV set with a personal code, using up to eleven characters (letters and numbers). By using
this function it will be possible to identify your TV set if it is ever stolen.
This code can only be input once!
Make sure you make a note of it in this instruction manual.
Picture Adjustment
1 Press the
button on the remote control to display the menu
Picture Mode
Contrast
Brightness
Colour
Personal
on the screen.
Sharpness
Reset
AI
On
Off
Normal
Noise Reduction
Colour Tone
Select:
Enter Menu:
Set Up
2 Push the joystick to select the
symbol, then push to enter the
Auto Tuning
Start
Programme Sorting
Select NexTView
AV Preset
Set Up menu.
- - - - - - -
Manual Set Up
Select:
Start Auto Tuning
Set Up
3 Push the joystick or to select Manual Set Up, then push
to
Auto Tuning
Programme Sorting
Select NexTView
AV Preset
- - - - - - -
enter.
Manual Set Up
GB
Select:
Enter:
Manual Set Up
4 Push or to select Personal ID, then push
to enter.
Language/Country
Manual Programme Preset
Further Programme Preset
RGB Set Up
- - - - - - -
Personal ID
Demo
Select:
Enter:
Manual Set Up
5 Push the joystick to or to select a letter, number, + or a blank;
then push to confirm this character. Select the other ten
Language/Country
Manual Programme Preset
Further Programme Preset
RGB Set Up
characters in the same way.
Personal ID
Demo
A - - - - - - - - - -
Select A-Z, 0-9:
Store: OK
6 After selecting all the characters, press the
button. A new menu
automatically appears on the screen asking you to be sure that you
want to save this ID.
Are you sure?
Save: OK Cancel:
7 a) If you do not wish to store this ID, push the joystick
and
repeat steps 4 to 6 to enter a new ID.
b) If you wish to store this ID, press the
Remember that this code can only be input once.
button.
8 Press the
button to return to the normal TV screen.
When you enter the Manual Set Up menu, in the "Personal ID" option the
code you entered above will be displayed. You will not be able to select and
change this option.
Menu System
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu System
Using the Demo Mode
This function provides an overview of some of the features available on this TV set.
Picture Adjustment
1 Press the
button on the remote control to display the menu
Picture Mode
Contrast
Brightness
Colour
Personal
on the screen.
Sharpness
Reset
AI
On
Off
Normal
Noise Reduction
Colour Tone
Select:
Enter Menu:
Set Up
Auto Tuning
Start
2 Push the joystick to select the
symbol, then push
to
Programme Sorting
Select NexTView
AV Preset
- - - - - - -
enter the Set Up menu.
Manual Set Up
Select:
Start Auto Tuning
Set Up
Auto Tuning
3 Push the joystick or to select Manual Set Up, then push
to
Programme Sorting
Select NexTView
AV Preset
- - - - - - -
enter.
Manual Set Up
Select:
Enter:
Manual Set Up
Language/Country
4 Push or to select Demo, then push
to enter and start
Manual Programme Preset
Further Programme Preset
RGB Set Up
Personal ID
Demo
the demonstration.
- - - - - - -
Start
Select:
Enter:
The TV set starts the demonstration and shows most of the
available picture functions.
Note:
Press the
button on the remote control to stop the
demonstration and return to the normal TV screen.
Menu System
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu System
Adjusting the H Centre picture for an RGB source
When connecting an RGB source, such as a DVD player, to Scart connector :1/
1 or :2/
2 you may need to readjust
the H Centre of the picture.
1 Press the
button repeatedly on the remote control until the
symbol ā¦1 or ā¦2 appears on the screen.
ā¦1
ā¢ ā¦1 symbol for devices connected to the :1/
1 Scart
2 Scart
connector.
ā¢ ā¦2 symbol for devices connected to the :2/
connector.
Picture Adjustment
2 Press the
button to display the menu on the screen.
Picture Mode
Contrast
Brightness
Colour
Personal
Sharpness
Reset
AI
On
Off
Normal
Noise Reduction
Colour Tone
Select:
Enter Menu:
Set Up
GB
3 Push the joystick to select the
enter the Set Up menu.
symbol, then push
to
Auto Tuning
Start
Programme Sorting
Select NexTView
AV Preset
- - - - - - -
Manual Set Up
Select:
Start Auto Tuning
Set Up
Auto Tuning
4 Push or to select Manual Set Up then push
to enter.
Programme Sorting
Select NexTView
AV Preset
- - - - - - -
Manual Set Up
Select:
Enter:
Manual Set Up
Language/Country
5 Push the joystick or to select RGB Set Up then push to enter.
Manual Programme Preset
Further Programme Preset
RGB Set Up
Personal ID
Demo
- - - - - - -
Select:
Enter:
RGB Set Up
H Centre
6 Push the joystick to enter H Centre, then push or to
O
adjust the centre of the picture over a range of -10 to +10. Press
the
button to store.
Adjust Position:
RGB Set Up
Confirm: OK
7 Press the
button to exit and return to the normal TV screen.
Menu System
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu System
Labelling and Selecting the screen format of Input Sources
This function enables you to select the size of the picture coming from the input source. It also allows you to assign a name to the
optional equipment you have connected to the sockets of this TV set. This name can contain up to 5 characters (letters or
numbers).
Picture Adjustment
1 Press the
button on the remote control to display the menu
Picture Mode
Contrast
Brightness
Colour
Personal
on the screen.
Sharpness
Reset
AI
On
Off
Normal
Noise Reduction
Colour Tone
Select:
Enter Menu:
Set Up
2 Push the joystick to select the
symbol, then push to enter the
Auto Tuning
Start
Programme Sorting
Select NexTView
AV Preset
Set Up menu.
- - - - - - -
Manual Set Up
Select:
Start Auto Tuning
Set Up
3 Push the joystick or to select AV Preset, then push
to enter.
Auto Tuning
Programme Sorting
Select NexTView
AV Preset
- - - - - - -
Manual Set Up
Select:
Enter:
AV Preset
4 Push the joystick or to select the input source. Then push
to enter.
INPUT AUTO FORMAT LABEL
AV1
AV2
AV3
AV4
Off
VIDEO
Off
Normal
Full
VIDEO
VIDEO
Select:
Enter:
5 Push the joystick or to select:
AV Preset
Off
(The size of picture is not automatically adjusted).
Normal (The size of picture is automatically adjusted according to
INPUT AUTO FORMAT LABEL
Off
AV1
AV2
AV3
AV4
VIDEO
the broadcaster information).
Off
Normal
Full
VIDEO
VIDEO
Full
(The TV set automatically adjusts the picture size to
eliminate any dark areas on the TV picture (as shown in
the section āChanging the Screen Formatā).
Select:
Next: Confirm: OK
AV Preset
Next push
.
INPUT AUTO FORMAT LABEL
AV1
AV2
AV3
AV4
Off
IDEO
Off
Normal
Normal
V
VIDEO
VIDEO
6 With the first element of the LABEL column highlighted, push the
Select A-Z, 0-9:
Confirm: OK
joystick or to select a letter, number, "+" or blank;
then push to confirm this character. Select the other four
characters in the same way.
7 After selecting all the characters, press the
button.
8 Repeat steps 4 to 7 if you wish to select the picture size or label other
input sources.
9 Press the
button to exit and return to the normal TV screen.
Whenever the equipment with the labelled input is selected for use, the name
appears on the screen for a few seconds.
24
Menu System
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu System
Using Multi PIP (Picture In Picture)
Multi PIP (Picture in Picture) mode displays a succession of 12 still pictures and a 13th that is live. You can manually select which
channel you wish to watch, either full-screen or in the PIP.
03
04
05
06
07
08
02
1 Press the
button on the remote control to select the PIP mode.
Now 13 programme positions appear on the screen, with the current
channel in the centre. The programme displayed at the top left will be
highlighted by a frame around it.
13
01
12
11
10
09
2 Push the joystick
/
/
or to move within the 13 displayed
channels. You will notice that the framed channel moves to highlight
the current selection. Continue until the channel you wish to select is
framed.
By pressing PROG -/+, the next or previous 13 programme
numbers will appear on the screen.
3 Press the
button to select the framed channel. The selected
channel moves to the centre.
GB
4 Press
to return to the normal TV mode.
Using PAP (Picture And Picture)
PAP divides the screen into two for watching two channels simultaneously. One of the pictures can be selected to come from a
video source.
The sound from the left screen comes through the TV set loudspeakers, the sound from the right screen can be heard via
headphones.
Switching PAP on and off
Press the button
format 4:3. Press
on the remote control to display the two screens in
again to switch PAP off.
Selecting PAP source
1 To change the source of the left screen:
With PAP switched on, press the number buttons (to select a TV
channel) or press
(to select a video source).
2 To change the source of the right screen:
With PAP switched on, press the button
on the remote control.
When the symbol appears at the bottom of the right screen,
press the number buttons (to select a TV channel) or press
select a video source).
(to
Swapping screens
With PAP switched on, press the
swap the two screens.
button on the remote control to
Zooming the screens
With PAP switched on, push the joystick repeatedly
change the size of the two screens.
or to
Selecting the sound of the right screen
You can hear the sound of the right screen via headphones. With
PAP switched on, refer to the "Adjusting the Sound" section of this
instruction manual and set the option "l Dual Sound" to "PAP".
Menu System
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Teletext
Teletext
Most TV channels broadcast information via Teletext. The index page of the teletext service (usually page 100) gives you
information on how to use the service.
Please use a TV channel with a strong signal, otherwise there may be Teletext errors.
Switching Teletext on and off
1 Select the TV channel which carries the teletext service you want
TELETEXT
to view.
Index
Programme
News
25
2 Press the
button once for Picture and Teletext (P&T). The screen
153
101
98
01
is divided in two, with the TV channel in the right corner and the
Teletext display on the left.
Sport
Weather
P&T mode: Press
then press PROG +/- to change
the channel of the TV screen. Push the joystick
change the size of the TV screen then press
resume normal teletext reception.
twice to get Teletext only.
or to
again to
TELETEXT
Index
3 Press
4 Press
5 Press
Programme
News
25
three times for Mix mode.
153
101
98
Sport
a fourth time or press
to switch off Teletext.
Weather
Selecting a Teletext page
Input three digits for the page number using the numbered buttons on
the control. If you make a mistake, type in any three digits then re-enter
the correct page number.
TELETEXT
Index
01
Programme
News
Sport
25
153
101
98
Selecting the next or preceding page
Weather
Press the
(PROG+) or
(PROG-) buttons on the remote
control to select the previous or next page.
Selecting a sub page
A teletext page may consist of several sub pages. In this case, after a
few seconds, an information line is displayed showing the number of
subpages.
216-02
Select the sub page by pressing or
.
To freeze a Teletext page
Press the
button to freeze the page. Press again to cancel the freeze.
01 02 03 04 05 06 07 08
Revealing the index page
Press the
button to reveal the index page (normally page 100).
Fastext
(only available if the TV station broadcasts Fastext signals)
When the colour coded menu appears at the bottom of a teletext page,
press a coloured button on the remote control (red, green, yellow or blue)
to access the corresponding page.
Using the feature "Page Catching"
1 This feature is used if the selected teletext page has several page
numbers on it (eg the index page).
2 Press the
button.
3 Push the joystick or to select the desired page number
then press the
a few seconds.
buttons. The requested page is displayed after
continued...
26 Teletext
Download from Www.Somanuals.com. All Manuals Search And Download.
Teletext
Using the Teletext menu
1 With Teletext switched on, press the
button on the remote
Teletext
control to display the teletext menu on the TV screen.
2 Push the joystick or to select your chosen item, then push to
to display the relevant sub menu.
Top / Bottom / Full
Text Clear
Reveal
Time Page
Page Overview
3 To remove the teletext menu from the screen, press the
Select:
Enter:
button.
Top / Bottom / Full
The Top/Bottom/Full sub menu allows you to enlarge different
sections of the Teletext page. Push the joystick to enlarge the
upper half of the screen, push to enlarge the lower half. Press
Top:
Bottom:
Full: OK
the
button to restore the page to normal size.
Text Clear
After having selected this function, you can watch a TV channel while
waiting for a requested Teletext page. As soon as the page is available,
GB
the symbol
changes colour. To view the page, press
.
Reveal
Some teletext pages contain hidden information (e.g. for a quiz). By
pressing Reveal the hidden information appears on screen.
Time Page
(depending on availability of teletext service)
Time Page
You can call up a time-coded page such as an alarm page at a time
specified by you. After you have displayed the Time Page sub menu:
PAGE
ā ā ā
TIME
- - : - -
1 Press the numbered buttons on the remote control to enter the
three digits of the desired page.
Select Page: 0-9 Next:
2 Press the numbered buttons again to enter the four digits of the
desired time.
3 Press the
button to store the desired time. The time is displayed
in the top left corner of the screen. At the requested time the page is
displayed.
Page Overview
(depending on availability of teletext service)
In the Page Overview menu the block and group pages of TOP- Text
are sorted into two columns, so that the customer can easily select the
desired page. For each block page in the first column, the corresponding
group pages are shown in the second column. Push the joystick or
to select the desired block page, then push
column. Push or to select the desired group page .
Finally, press the button to display the page.
to enter to the group pages
Teletext
27
Download from Www.Somanuals.com. All Manuals Search And Download.
NexTView
NexTView *
* (depending on availability of service)
NexTView is an on-screen electronic programme guide (EPG), providing you with programme information for different
broadcasters.
Picture Adjustment
Selecting your NexTView provider
Picture Mode
Contrast
Brightness
Colour
Sharpness
Personal
The TV set automatically selects the best NexTView provider for
you.
This provider is available about 30 minutes after the channel tuning.
You can however change this selection of provider if you wish.
Reset
AI
On
Off
Normal
Noise Reduction
Colour Tone
Select:
Enter Menu:
1 Press the
button on the remote control to display the menu
on the screen.
Set Up
2 Push the joystick or to select the
symbol, then push
to enter. A
Auto Tuning
Start
Programme Sorting
Select NexTView
AV Preset
- - - - - - -
to enter the Set Up menu.
3 Push or to highlight Select NexTView then push
Manual Set Up
list is displayed containing all available NexTView providers.
4 Push or to select the desired provider then press the
button to store.
Select:
Start Auto Tuning
Set Up
Auto Tuning
5 Press the
button to remove the menu from the screen.
Programme Sorting
Select NexTView
AV Preset
- - - - - - -
Manual Set Up
Select:
Enter:
Displaying NexTView
1 Press the
button repeatedly on the remote control to switch
NexTView on and off.
07 Tue
12:38
SWISS
TXT
TPS
/
RINGIER
Tue 07. 04 .98
7
Tue
Star Wars
* In some cases, you may also need to push the joystick
display the Sony electronic programme guide.
to
Super RTL
10:35
10:20
-
-
12:45
12:00
8
Wed
Werner Beinhart
-
Pro
7
9
Thu
Flui grĆ¼sst den Rest der Welt
Kabel 10:45 10:50
1
-
12
10
Fri
Once upon
Euronews
a
time in the West
2 Push the joystick
/
/
or to move the cursor
11:00
-
11:20
11
Sat
International News
RTL Plus
11:45
-
12:50
around the screen.
12
Sun
Hat der alte Hexenmeister sich doch
einmal fortbegeben, und nun sollen
seine Geister auch nach meinem Willen
leben.
13
Mon
3 Press the
button to confirm a selection.
a) If you press the
button in the date, time or icon (themes)
Index
columns, you change the programme list according to the
selection.
full selection list
personal selection
news broadcasts
movies
sports
entertainment
children
b) If you press the
button in the programme list, you directly
display the channel if the broadcast is currently running, or,
you display the "Long Info" menu if the broadcast is running at
some future time.
return to last menu
Using the "Individual Setting" menu
You can make a personal list of the types of programmes you
wish to view on the programme guide.
1 Push the joystick or to select the
icon then push to
to
display the "Individual Setting" menu.
2 Push the joystick or to select your chosen item on the screen
then press the button to confirm your choice.
3 Repeat step 2 for all the items you wish to have in your list.
4 When you have finished the list, push
5 Press the button to return to the previous menu.
6 Push the joystick or to select the icon then press the
button again to activate your "Individual Setting" filter.
to select the
icon.
continued...
28
NexTView
Download from Www.Somanuals.com. All Manuals Search And Download.
NexTView
Using the Long Info menu
With this menu screen, you can set timers or record selected
programmes.
1 Push or to select a future programme in the programme list
column.
2 Press the
button to display the Long Info menu on the TV
screen.
To set the timer
Push the joystick
or to highlight the
icon then press the
First nextTView/EPG-Providers in Europe
07 Tue
12:38
SWISS
TXT
TPS
/
RINGIER
nexTView
button repeatedly to "set the timer" or "cancel the timer". If you choose
to set the timer, the programme is marked with a clock symbol and a
message appears on the screen shortly before the programme is due
to start asking whether you wish to still view this programme.
Tue 07. 04 .98
Address Mapping
The position of the addresses in the
OSDA is shown in the following diagram.
The position values of the DPW are set
to '0'.
If other values are set, the complete
combination will be scrolled.
Example:
if the DPWC is set to '63', the char-
GB
This channel has been set for
a
timer
VPS/PDC
On
To view the timer table
Speed
Timer Prog
SP
VCR1
Push the joystick
or to highlight the
icon then press the
button repeatedly to switch on/off the timer table. This table shows the
programmes on which you have already set a timer. (You can set a timer
on up to 5 programmes).
To record programmes
(only with Smartlink VCRs)
1 Connect your Smartlink VCR.
2 Push the joystick
or to select
then press the
button
to download the information to your VCR.
3 To set up the VCR:
VPS/PDC
Push the joystick
or to select VPS/PDC then press the
VPS/PDC
Speed
VCR Setup
On
SP
VCR1
button repeatedly to select On or Off. With this setting on you have
the guaranteed recording of the whole broadcast should there be a
change in the TV programme. This only works if the selected
channel broadcasts a VPS/PDC signal.
Speed
Push the joystick to select Speed then press the
button
repeatedly to select between SP for standardplay or LP for longplay.
With longplay you can record twice as much on a videotape.
The picture quality however may suffer.
VCR Setup
Push the joystick to select VCR Setup then press the
button repeatedly to select which VCR you wish to programme,
namely VCR1 or VCR2.
4 Finally, push the joystick
to select the
icon then press the
button to remove the menu from the TV screen.
NexTView
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Connections
Connecting Optional Equipment
Using the following instructions, you can connect a wide range of optional equipment to this TV set.
S.VHS/Hi8/DVC
camcorder
1
2
āPlayStationā*
DVD
To avoid
picture
distortion:
ā¢ Do not
connect
equipment to
F and G
connectors at
the same time.
Dolby
Surround
Amplifier
B
I
D
E
F
G
Hi-Fi
A
* āPlayStationā
is a product of
Sony
Computer
Entertainment,
Inc.
* āPlayStationā
is a trademark
of Sony
1
2
āPlayStationā*
DVD
C
H
Computer
Entertainment,
Inc.
8mm/Hi8/DVC
camcorder
Decoder
VCR
Acceptable input signal
Available output signal
A Audio/video and RGB signal
B Audio/video and RGB signal
C Audio/video and S video signal
D Centre speaker input Set āSpeakerā
on the Features menu to āCentre inā.
E No inputs
Video/audio from TV tuner.
Video/audio displayed on TV screen (monitor out).
Video/audio from selected source.
No outputs.
Audio signal.
No output.
No output.
No output.
Audio signal to headphones.
F S Video signal
G Video signal
H Audio signal
I No input
30
Optional Connections
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Connections
Using Optional Equipment
Additional Information when connecting equipment
Connecting a VCR
We recommend you connect your VCR to the Csocket using a scart lead. If you do not have a scart lead, use the āManually
Tuning the TVā section of this instruction manual to tune in the channel of the VCR test signal to TV programme number ā0ā.
Also refer to your VCR instruction manual to get the VCR test signal.
If your video supports Smartlink, please refer to the āSmartlinkā section of this instruction manual.
Connecting to External Audio Equipment
1 To listen to the sound from the TV set on Hi-Fi equipment:
Plug in your Hi-Fi equipment to the Esockets on the rear of the TV set if you wish to amplify the audio output
from the TV.
The output level from the Esockets can be varied by adjusting the volume of the headphones output. Refer to the āAdjusting
the soundā section of this instruction manual to adjust this.
2 To listen to Dolby Prologic system sound on the TV set speakers:
Plug in your Dolby Prologic system decoder amplifier to the Dsocket on the rear of the TV set if you wish to listen to the audio
output from your equipment on the TV speakers. If you have a Dolby amplifier, connect the centre output from your amplifier
to the Dsocket to use the TV set as a centre speaker. Refer to the āUsing the Features menuā section of this instruction manual
and set the option āSpeakerā to āCentre inā.
Remember that the maximum input level of this input is 30 W. Be careful never to exceed this.
GB
For mono equipment
Connect the phono plug to the L/G/S/I socket on the front of the TV and select the
this page below.
4 input signal using the instructions on
Select and View the Input Signal
In order to get the input signal of a connected equipment onto the TV screen, you need to select the symbol of the
connector to which you have connected the device.
e. g. : If your VCR is connected to the connector with the symbol Y1/
repeatedly until you see the symbol 1 on the screen.
1. Press the button
on the remote control
1 Connect your equipment to the designated socket, as shown on the previous page.
2 Press the
button on your remote control repeatedly until the correct input symbol
appears on the screen.
Symbol
Input signals
1
ā¢ Audio/video input signal through the Scart connector Aor * RGB
through Scart connector A.
2
3
4
ā¢ Audio/Video input signal through the Scart connector Bor * RGB
through Scart connector B.
ā¢ Audio/Video input signal through the Scart connector Cor * S Video
through Scart connector C.
ā¢ S Video input signal through the 4-pin DIN connector For * video input
signal through phono jack Gand audio input signal through phono jacks H.
* (automatic detection of the signal according to the connected equipment)
3 Switch on the connected equipment.
4 To return to the normal TV picture, press the
button on the remote control.
31
Optional Connections
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Connections
Smartlink
Smartlink is a direct link between the TV set and a VCR.
Rear
For Smartlink you need:
ā¢ A VCR which supports Smartlink, NextView Link, Easy Link or Megalogic.
Megalogic is a trademark of Grundig Corporation.
EasyLink is a trademark of Philips Corporation.
ā¢ A fully-wired 21 pin SCART cable to connect your VCR to the Scart connector :3/q3
(SMARTLINK) on the rear of the TV set.
The features of Smartlink are:
ā¢ Tuning information such as the channel overview are downloaded from the TV set to the VCR.
ā¢ Direct recording: while watching TV you only need to press just one button on the VCR to
record this programme.
ā¢ Automatically switching on: with the TV set in standby mode, pressing the āPlay zā button on
VCR
your VCR automatically switches the TV on.
Decoder
If you have connected a decoder to a VCR which supports the Smartlink feature, select
the menu āFurther Programme Presetā in the
(Manual Set Up) menu and select
DECODER AV3 for each coded channel. For more details, please refer to the section
"Using the Further Programme Preset function" of this instruction manual.
For more information on Smartlink, please refer to the Instruction Manual of your
VCR.
32
Optional Connections
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Remote Control Configuration for VCR/DVD
In itās default condition this remote control operate the basic functions of this Sony TV, Sony DVDs and most Sony VCRs. To
control VCRs and DVDs of other manufacturers and some Sony VCR models, please complete the following steps:
Before you start, look up the 3 digit code for your brand of DVD or VCR from the list below. On those brands that have more
than one code, enter the first code number.
1 Press the Media Selector button
on the remote control repeatedly until the required green light
(VCR or DVD) is lit.
If Media Selector is on the TV position, code numbers will not be stored.
3
2
2 Before the green light goes out, press and hold the yellow button
for approximately 6 seconds
until the green light starts flashing.
1
3 Whilst the green light is flashing, enter all three digits of the code for your brand of VCR or DVD using
the number buttons on the remote control.
If your selected code is entered correctly, all three green lights will be lit momentarily.
4 Turn on your VCR or DVD and check that the main functions work.
ā¢ If your device is not working or some of the functions do not work please check that you entered
the correct code or try the next code listed against the brand.
ā¢ Your brand codes may be lost if weak batteries are not replaced within a few minutes. To reset
your brand of DVD or VCR please repeat the above steps. A small label is added inside the
battery door to allow you to record your brand codes.
GB
ā¢ Not all brands are covered and not all models of every brand may be covered.
VCR Brand List
DVD Brand List
Brand
Code
Brand
Code
SONY (VHS)
SONY (BETA)
SONY (DV)
AIWA
301, 302, 303, 308, 309
SONY
001
303, 307, 310
AIWA
021
304, 305, 306
DENON
GRUNDIG
HITACHI
JVC
018, 027, 020, 002
325, 331, 351
009, 028, 023, 024, 016, 003
AKAI
326, 329, 330
025, 026, 015, 004
DAEWOO
GRUNDIG
HITACHI
JVC
342, 343
006, 017
358, 355, 360, 361, 320, 351
KENWOOD
LG
008
327, 333, 334
015, 014
314, 315, 322, 344, 352, 353, 354, 348, 349
LOEWE
009, 028, 023, 024, 016, 003
LG
332, 338
MATSUI
ONKYO
PANASONIC
PHILIPS
PIONEER
SAMSUNG
SANYO
013, 016
LOEWE
358, 355, 360, 361, 320, 351
022
MATSUI
ORION
356, 357
018, 027, 020, 002
328
009, 028, 023, 024, 016, 003
PANASONIC
PHILIPS
SAMSUNG
SANYO
321, 323
004
311, 312, 313, 316, 317, 318, 358, 359
011, 014
339, 340, 341, 345
335, 336
324
007
SHARP
019, 027
SHARP
THOMSON
TOSHIBA
YAMAHA
012
THOMSON
TOSHIBA
319, 350
337
003
018, 027, 020, 002
33
Additional Information
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Replacing the Lamp
When the lamp becomes dark or the picture colour is
3 Loosen the screw with an object such as a coin and
not normal or the lamp indicator
flashes, replace with a new lamp.
on the TV set
remove the lamp cover.
ā¢ Only use the lamp XL-2000E for replacement. If you
use another lamp, it may cause damage to the TV set.
ā¢ Do not remove the lamp except when replacing it.
ā¢ Before replacing the lamp, turn off the power and
disconnect the power cord.
ā¢ Replace the lamp only after it becomes cool. The front
glass of the lamp remains at least 100 Ā°C (212 Ā°F) even
after the power has been turned off for 30 minutes.
ā¢ Do not place the old lamp in proximity to children or
flammable material.
ā¢ Do not get the old lamp wet, or insert objects inside
the lamp. It may cause the lamp to explode.
ā¢ Do not place the old lamp near easily flammable
objects, as this may cause fire. Also, do not put your
hand inside the lamp compartment, as you may be
burned.
4 Loosen the two screws and pull out the lamp.
Loosen two screws with the hexagon key supplied.
ā¢ Attach the new lamp securely. If it is not securely
attached, the picture may become dark.
1
2
Turn off the power and disconnect the power cord.
ā¢ If you start changing the lamp without disconnecting
the power cord, the standby indicator on the TV set
flashes. Disconnect the power cord to continue
changing the lamp.
ā¢ Replace the lamp 30 minutes or more after the power
is turned off to allow it to cool.
ā¢ Prepare the new lamp.
Pull out the lamp by the handle.
Remove the front panel.
The lamp is still extremely hot immediately after the
power is turned off. Be careful that you donāt touch
the front glass or surrounding area of the lamp or the
glass of the lamp compartment.
5 Attach the new lamp.
Replace the new lamp securely in the lamp receptacle and
fasten the screws tightly using the hexagon key supplied.
6 Attach the lamp cover.
Remove the front panel without moving the TV set.
Fasten the screw tightly with an object such as a coin.
7 Attach the front panel.
Attach the front panel locating the left hand edge of the
cover first and then pushing the right hand side back into
place.
Notes
ā¢
Do not touch or stain the front glass of the new lamp or the glass
of the lamp compartment. If the glass become dirty, the picture
quality may deteriorate or the lamp life may shorten.
Attach the lamp cover firmly. If it is not firmly attached, the
power will not turn on.
When the lamp burns out, a noise is audible. This does not
indicate damage to the TV set.
ā¢
ā¢
Grasp the right side of the front panel with your fingers
and pull it forward. Be careful not to catch your
fingernails.
ā¢
ā¢
Consult your nearest Sony service center to obtain a new lamp.
Always remember to dispose of used lamps in an
evironmentally friendly way.
Additional Information
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Optimum Viewing Area
For the best picture quality, try to position the TV set so that you can view the screen from within the areas shown below.
Horizontal viewing area
65Āŗ
65Āŗ
GB
(Optimum viewing position)
Vertical viewing area
30Āŗ
30Āŗ
(Optimum viewing position)
35
Additional Information
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Specifications
TV system
Sound output
B/G/H, D/K, I, L
2 x 20 W (music power)
2 x 15 W (RMS)
Colour system
PAL, SECAM
Centre SP input
NTSC 3.58, 4.43 (only Video In)
30 W (RMS) (using as the centre speaker)
Channel coverage
Power consumption
VHF:
UHF:
CATV: S1-S20
HYPER: S21-S41
D/K:
I:
L:
E2-E12
E21-E69
210 W
Standby Power consumption
ā¤ 1 W
Dimensions (w x h x d)
ā¢ KF-50SX200U: Approx. 1376 x 898 x 384 mm
ā¢ KF-42SX200U: Approx. 1200 x 790 x 343 mm
R1-R12, R21-R69
UHF B21-B69
F2-F10, B-Q, F21-F69
Weight
Projected picture size
ā¢ KF-50SX200U: Approx. 43 kg
ā¢ KF-42SX200U: Approx. 37 kg
ā¢ KF-50SX200U: 50 inches (approx. 127 cm measured
diagonally).
ā¢ KF-42SX200U: 42 inches (approx. 107 cm measured
diagonally).
Accessories supplied
1 Remote Control (RM-905)
2 Batteries (IEC designated, AAA size)
1 Hexagon key
2 Brackets
2 Screws
Rear Terminals
ā¢
Centre speaker input terminals (2
terminals)
C
ā¢
(L, R) audio outputs (phono jacks)
1 Cleaning Cloth
ā¢ :1/
1
2
21-pin Euro connector (CENELEC
standard) including TV audio/video
input, RGB input, TV audio/video
output.
Other features
ā¢ Digital Comb filter (High resolution)
ā¢ TELETEXT, Fastext, TOPtext (2000 page TEXT memory)
ā¢ NexTView
ā¢ NICAM
ā¢ :2/
21-pin Euro connector (CENELEC
standard) including audio/video
input, RGB input, audio/video
output (monitor out).
ā¢ Sleep Timer
ā¢ Smartlink
ā¢ Noise Reduction
ā¢ Graphic Equaliser
ā¢ Personal ID
ā¢ Dolby Virtual
ā¢ BBE
ā¢ :3/q3
(SMARTLINK)
21-pin Euro connector (CENELEC
standard) including audio/video
input, S video input, selectable
audio/video output and Smartlink
interface.
Front Terminals
ā¢ q4 S video input - 4 pin DIN
ā¢ ā¦4 video input - phono jack
ā¢ ā¤4 audio inputs - phono jacks
ā¢ 2
Headphones jack - minijack stereo
Design and specifications are subject to change without notice.
Ecological Paper - Totally Chlorine Free
Additional Information
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Troubleshooting
Here are some simple solutions to problems which may affect the picture and sound.
Problem
Solution
No picture (screen is dark), no sound.
ā¢ Plug the TV set in.
ā¢ Press the
ā¢ If the
button on the front of the TV set.
indicator is on in red colour, press TV
button on the remote
control.
ā¢ Check the aerial connection.
ā¢ Check that the selected video source is on.
ā¢ Turn the TV set off for 3 or 4 seconds and then turn it on again using the
button on the front of the TV set.
ā¢ Using the MENU system, select the Picture Adjustment menu. Adjust the
brightness, contrast and colour balance levels.
Poor or no picture (screen is dark),
but good sound.
ā¢ Press the
symbol
button repeatedly on the remote control until the RGB
2 is displayed on the screen.
Poor picture quality when watching a
RGB video source.
1 or
ā¢ Press the
+/- button on the remote control.
Good picture, no sound
ā¢ Check that "Main" speaker is selected in the "Features" menu.
GB
ā¢ Using the MENU system, select the Picture Adjustment menu. Adjust the
colour balance.
No colour on colour programmes
ā¢ Turn off any equipment connected to the Scart connectors on the rear of
the TV set.
Distorted picture when changing
programmes or selecting teletext
ā¢ Adjust the RF Attenuator (ATT). For details, please refer to the section
"Using the Further Programme Preset function".
Striped picture
ā¢ Adjust Fine Tuning (AFT) to obtain better picture reception. For details,
please refer to the section "Using the Further Programme Preset function"
ā¢ Using the menu system, select the āPicture Adjustmentā menu and set
āNoise Reductionā to āAutoā.
Noisy picture when viewing TV channel
ā¢ Using the menu system, select the āFeaturesā menu and set āAV3 Outputā
to āTVā
No unscrambling or unstable picture
whilst viewing a scrambled channel with
a decoder connected through the Scart
connector :3/q3 (SMARTLINK)
ā¢ Check that the Media Selector on the remote control is set to the device you
are using (VCR, TV or DVD).
Remote control does not function
ā¢ If the remote control does not operate the VCR or DVD even when the
Media Selector has been set correctly. Enter the necessary code set as
explained on āRemote Controll Configuratio for VCR/DVDā chapter of
this instruction manual.
ā¢ Replace the batteries.
ā¢ Replace the lamp. For details please refer to the section āReplace the
Lampā
The lamp indicator
flashes.
on the TVset
ā¢ If you are changing the lamp without disconnecting the power cord, the
standby indicator flashes. To continue changing the lamp, disconnect the
power cord and wait for at least 30 minutes to allow the lamp to cool.
ā¢ Check that the lamp cover is tightly attached.
The standby indicator
flashes.
on the TVset
ā¢ If you are not changing the lamp but the standby indicator flashes, contact
your nearest Sony service centre.
ā¢ If you continue to have these problems, have your TV serviced by qualified personnel.
ā¢ NEVER open the casing yourself.
37
Additional Information
Download from Www.Somanuals.com. All Manuals Search And Download.
Television Channel Number Guide for United Kingdom
Only the main transmitters are listed. Information regarding the regional sub-relay channel numbers can be obtained by
contacting The BBC Engineering Information Dept., Telephone Number 020 7852 5040.
MAIN TRANSMITTERS
London & South East
BBC1
BBC2
ITV
CH4
CH5
1
2
3
4
5
Bluebell Hill
Crystal Palace
Dover
Heathfield
Oxford
40
26
50
49
57
46
33
56
52
63
43
23
66
64
60
65
30
53
67
53
-
-
-
-
49
South-West
6
7
8
9
Beacon Hill
57
22
55
51
33
63
28
62
44
26
60
25
59
41
23
53
32
65
47
29
-
Caradon Hill
Huntshaw Cross
Redruth
-
67
37
-
10 Stockland Hill
Channel Islands
11 Fremont Point
51
44
41
47
-
South
12 Hannington
13 Midhurst
14 Rowridge
39
61
31
45
55
24
42
58
27
66
68
21
-
-
-
West
15 Mendip
58
64
61
54
37
East
16 Sandy Heath
17 Sudbury
18 Tacolneston
31
51
62
27
44
55
24
41
59
21
47
65
39
-
52
Midlands (West)
19 Ridge Hill
20 Sutton Coldfield
21 The Wrekin
22
46
26
28
40
33
25
43
23
32
50
29
-
-
-
Midlands (East)
22 Waltham
58
64
61
54
-
Northern Ireland
23 Brougher Mountain 22
24 Divis
25 Limavady
28
27
62
25
24
59
32
21
65
-
-
-
31
55
North
26 Belmont
27 Emley Moor
22
44
28
51
25
47
32
41
56
37
North-West
28 Winter Hill
55
62
59
65
48
North-East
29 Bilsdale West Moor 33
30 Caldbeck
31 Chatton
32 Pontop Pike
26
34
45
64
29
28
49
61
23
32
42
54
-
30
39
58
56
-
-
Scotland
33 Angus
34 Black Hill
35 Sandale
57
40
22
-
31
33
22
33
40
33
39
31
55
63
46
67
-
27
26
28
26
46
26
45
27
62
60
43
-
53
50
-
-
37
-
56
48
-
36 Caldbeck
37 Craigkelly
38 Darvel
28
24
23
25
23
43
23
49
24
59
32
21
29
32
29
50
29
42
21
65
39 Durris
67
-
40 Eitshal (Lewis)
41 Keelylang Hill
42 Knock More
43 Rosemarkie
44 Rumster Forest
45 Selkirk
-
-
-
-
52
Wales
46 Blaenplwyf
47 Carmel
31
57
57
52
46
44
27
63
63
45
40
51
24
60
60
49
43
41
21
53
53
42
50
47
56
-
48 Llanddona
49 Moel-y-Parc
50 Presely
-
-
37
-
51 Wenvoe
38 Additional Information
Download from Www.Somanuals.com. All Manuals Search And Download.
Sony EspaƱa, S.A.
Printed in Spain
Ecological Paper - Totally Chlorine Free
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Sharp Video Game Sound System HT SB400 User Manual
Shopsmith Indoor Furnishings 555970 User Manual
Silvercrest Bluetooth Headset SBTF 10 A1 User Manual
Sony Camera Accessories LSFVHA User Manual
Sony DVD Player BDV EF200 User Manual
Sony DVD Player DA V HDX5OO User Manual
Sylvania Cordless Telephone STC984 User Manual
Sylvania DVD Recorder ZC320SL8B User Manual
Sylvania Flat Panel Television LC427SSX User Manual
Sylvania TV VCR Combo D6313CCB User Manual