Notes on DualDiscs
Basic Operations
A DualDisc is a two sided disc product which mates
DVD recorded material on one side with digital
audio material on the other side. However, since the
audio material side does not conform to the Compact
Disc (CD) standard, playback on this product is not
guaranteed.
3-099-778-12(1)
Tips
Changing the AM tuning interval
If you need to change the AM tuning interval, do the
following:
Playback starts from the track/MP3 file you last stopped playing
Playing a CD/MP3 disc
(Resume play). During stop, the track/MP3 file number to be played
is displayed.
1
Press CD
on the unit.
To cancel the resume play (to start play from the beginning of the
1
Press RADIO BAND AUTO PRESET
on the unit
first track/MP3 file), press
you open the CD tray or turn off the unit, the resume play is also
canceled.
while the CD is stopped. When
Personal Audio System
until “AM”is displayed.
“CD” appears in the display.
Music discs encoded with copyright
2
3
Press ENTER
on the unit for 2 seconds.
2
Press
on the unit, and place a disc with the
protection technologies
label side up on the CD tray.
Notes
Press RADIO BAND AUTO PRESET
on the unit for
is product is designed to playback discs that conform
to the Compact Disc (CD) standard. Recently, various
music discs encoded with copyright protection
technologies are marketed by some record companies.
Please be aware that among those discs, there are some
that do not conform to the CD standard and may not be
playable by this product.
When pressing
( , , , ) on the unit, press
To close the CD tray, press
on the unit.
2 seconds.
GB
Operating Instructions
the marking at the part near the outer edge.
“9K STEP” or “10K STEP” flashes.
You cannot locate a specific track if “SHUF” or “PGM” is lit in the
display. Press
, and then press MODE
repeatedly until
4
5
Press TUNE + or – on the unit to select “9K STEP”for
9 kHz interval or “10K STEP”for 10 kHz interval.
“SHUF” and “PGM” disappears from the display.
Example of folder structure and playing order
e playing order of the folders and files is as follows:
Press ENTER
on the unit.
Aſter changing the tuning interval, you need to reset your
preset AM radio stations.
Notice for customers in the United
Folder
Kingdom
MP3 file
A moulded plug complying with BS 1363 is fitted to this
equipment for your safety and convenience.
3
Press
on the unit.
e unit plays all the tracks/MP3 files once.
When you place MP3 discs, “MP3” appears in the
display aſter the unit reads the file information.
Should the fuse in the plug supplied need to be replaced,
same rating fuse approved by ASTA or BSI to BS 1362,
(i.e. marked with or mark) must be used.
ZS-S50CP
© 2007 Sony Corporation Printed in China
If the plug supplied with this equipment has a detachable
fuse cover, be sure to attach the fuse cover aſter you
change the fuse. Never use the plug without the fuse
cover. If you should lose the fuse cover, please contact
your nearest Sony service station.
Audio CD
Disposal of Old Electrical & Electronic
Equipment
(Applicable in the European Union and
other European countries with separate
collection systems)
WARNING
Track number
Playing time
MPEG Layer-3 audio coding technology and patents
licensed from Fraunhofer IIS and omson.
MP3 disc
To reduce the risk of fire or electric shock,
do not expose this apparatus to rain or
moisture.
is symbol on the product or on its packaging indicates
that this product shall not be treated as household
waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and
electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. e recycling of materials
will help to conserve natural resources. For more detailed
information about recycling of this product, please
contact your local Civic Office, your household waste
disposal service or the shop where you purchased the
product.
To avoid electrical shock, do not open
the cabinet. Refer servicing to qualified
personnel only.
MP3 file number
After the song title is displayed,
the playing time* will appear.
*
If the playing time is more than 100 minutes, it appears “--:--” in
the display.
To reduce the risk of fire, do not cover the ventilation of
the apparatus with newspapers, tablecloths, curtains, etc.
And do not place lighted candles on the apparatus.
To
Press
Notes on MP3 discs
Pause playback
. To resume play, press it again.
When the disc is inserted, the unit reads all the files on that disc.
During this time, “READING” is displayed. If there are many folders
or non-MP3 files on the disc, it may take a long time for play to
begin or for the next MP3 file to start play.
To reduce the risk of fire or electric shock, do not place
objects filled with liquids, such as vases, on the apparatus.
Stop playback
.
Go to the next track/
MP3 file
Go back to the
previous track/MP3
file
(on the remote) .
Connect the apparatus to an easily accessible AC
outlet. Should you notice an abnormality in the
apparatus, disconnect the main plug from the AC outlet
immediately.
We recommend that you do not save unnecessary folders or files
other than MP3 ones in the disc to be used for MP3 listening.
A folder that does not include an MP3 file is skipped.
Maximum number of files: 255
* VOLUME +
and
on the unit have a tactile dot.
(on the remote) .
Applicable accessories: Remote control
Maximum number of folders: 150 (including the root folder)
Maximum number of folders and files in total: 300
Maximum directory levels: 8
Folder names and file names can be displayed with up to 32
characters including quotation marks.
e characters A - Z, 0 - 9, and _ can be displayed on this unit.
Other characters are displayed as “_”.
is unit conforms to Version 1.0, 1.1, 2.2, 2.3 and 2.4 of the ID3 tag
format. When the file has the ID3 tag information, “song title”, “artist
name” and “album name” can be displayed. If the file does not have
the ID3 tag information, “NO TITLE” appears instead of song title,
“NO ARTIST” appears instead of artist name and “NO ALBUM”
appears instead of album name. e ID3 tag information can be
displayed with up to 30 characters.
Do not install the appliance in a confined space, such as a
bookcase or built-in cabinet.
Select a folder on an
MP3 disc
/PRESET + ( + on the remote)
to go forward and /PRESET – (
– on the remote)
Before using the unit
to go backward.
Locate a point while
listening to the sound
(forward) or
To turn on/off the power
(backward) while playing and hold it
until you find the point. (On the remote,
use or )
.
Press OPERATE
To adjust the volume
Locate a point while
observing the display
(forward) or
(backward) in pause and hold it until
you find the point. (On the remote, use
or )
.
Press VOLUME +, –
Power sources
Specifications
To listen through headphones
Connect the headphones to the (headphones) jack .
Remove the CD
.
e characters may not be displayed correctly according to the
character code.
When naming, be sure to add the file extension “mp3” to the file
name.
Battery life
For player:
CD player section
System
To select the sound characteristic
On the remote
To select CD function, press FUNCTION
to select “CD” in the display.
Compact disc digital audio system
Laser diode properties
Press SOUND
you want.
repeatedly to select the audio emphasis
FM Radio reception
repeatedly
Sony R20P: approx. 30 h
Sony alkaline LR20: approx. 60 h
CD playback
Sony R20P: approx. 8 h
Sony alkaline LR20: approx. 20 h
Emission duration: Continuous
Laser output: Less than 44.6 µW
(is output is the value measured at a distance of
about 200 mm from the objective lens surface on the
optical pick-up block with 7 mm aperture.)
Number of channels
If you put the extension “mp3” to a file other than an MP3 file, the
unit cannot recognize the file properly and will generate random
noise that could damage your speakers.
Choose
To get
e file name does not correspond to the ID3 tag.
Powerful, clean sounds, emphasizing low and
high range audio
2
It is recommended that you use alkaline batteries.
Dimensions
Approx. 480 × 156 × 250 mm (w/h/d)
(incl. projecting parts)
Mass
Approx. 4.3 kg (incl. batteries)
Supplied accessories
AC power cord (1)
Remote control (1)
Light, bright sounds emphasizing high and
middle range audio
Frequency response
20 - 20 000 Hz +1/–1 dB
Wow and flutter
Listening to the radio
2
to a wall
outlet
Below measurable limit
Percussive sounds, emphasizing bass audio
1
to AC IN
Radio section
Frequency range
To listen to FM or AM
The presence of vocals, stressing middle
range audio
FM: 87.5 - 108 MHz
AM: 531 - 1 611 kHz (9 kHz step)
530 - 1 610 kHz (10 kHz step)
IF
1
Press RADIO BAND AUTO PRESET
on the unit
Connect the AC power cord or insert six R20 (size D) batteries (not supplied) into the battery compartment .
The whole dynamic range for music such as
classical music
(RADIO BAND
on the remote) repeatedly to
Design and specifications are subject to change without notice.
select FM or AM.
Notes
FM: 10.7 MHz
Optional accessories
Sony MDR headphones series
Replace the batteries when the OPR/BATT indicator
dims or when the unit stops operating.
AM: 450 kHz
2
Hold down TUNE + or –
until the frequency digits
To reinforce the bass sound
Antennas
Replace all the batteries with new ones. Before you replace the batteries, be sure to take out the CD from the unit.
begin to change in the display.
FM: Telescopic antenna
AM: Built-in ferrite bar antenna
Press MEGA BASS
display.
to display “MEGA BASS” in the
To use the unit on batteries, disconnect the AC power cord from the unit.
When you operate the unit on batteries, you cannot turn on the unit using the remote.
e unit automatically scans the radio frequencies and
stops when it finds a clear station.
If you cannot tune in a station, press TUNE + or –
repeatedly to change the frequency step by step.
When an FM stereo broadcast is received, “ST”
appears.
General
Speaker
To return to normal sound, press MEGA BASS
disappear from the display.
to
Full range: 10 cm dia., 6 , cone type (2)
Input
AUDIO IN jack (stereo minijack): Minimum input level 245 mV
Outputs
Preparing the remote
Headphones jack (stereo minijack)
For 16 - 64 impedance headphones
Power output
Insert two R6 (size AA) batteries (not supplied).
Tip
If the FM broadcast is noisy, press MODE
until “MONO” appears
4.5 W + 4.5 W (at 6 , 10% harmonic distortion)
Power requirements
in the display and the radio will play in monaural.
For player:
230 V AC, 50 Hz
9 V DC, 6 R20 (size D) batteries
For remote control:
3 V DC, 2 R6 (size AA) batteries
Power consumption
AC 16 W
Replacing batteries
With normal use, the batteries should last for about six months. When the remote no longer operates the unit, replace all
the batteries with new ones.
Download from Www.Somanuals.com. All Manuals Search And Download.
|