| 3-082-258-11 (1)   USB – PSTN Modem Adaptor   Operating Instructions   Mode d’emploi   Ow n e r’s Re co rd   The model and serial numbers are located on the bottom of the unit.   Record the serial number in the space provided below.   Refer to these numbers whenever you call upon your Sony dealer regarding   this product.   Model No. UNA-PSTN   Serial No.   UNA-PSTN   ©2003 Sony Corporation   Download from Www.Somanuals.com. All Manuals Search And Download.   However, there is no guarantee that interference will not occur in a   particular installation. If this equipment does cause harmful interference to   radio or television reception, which can be determined by turning the   equipment off and on, the user is encouraged to try to correct the   interference by one or more of the following measures:   — — — Reorient or relocate the receiving antenna.   Increase the separation between the equipment and receiver.   Connect the equipment into an outlet on a circuit different from that to   which the receiver is connected.   — Consult the dealer or an experienced radio/ TV technician for help.   FCC Pa rt 68   This equipment complies with Part 68 of the FCC rules and the   requirements adopted by the ACTA. On the bottom of this equipment is a   label that contains, among other information, a product identifier in the   format US : 1KRM500BUNAPSTN. If requested, this number must be   provided to the telephone company.   A telephone plug and jack used to connect this equipment to the premises   wiring and telephone network must comply with the applicable FCC Part   68 rules and requirements adopted by the ACTA.   This modem uses the USOC RJ-11 telephone jack.   A plug and jack used to connect this equipment to the premises wiring and   telephone network must comply with the applicable FCC Part 68 rules and   requirements adopted by the ACTA. A compliant telephone cord and   modular plug is provided with this product. It is designed to be connected   to a compatible modular jack that is also compliant. See installation   instructions for details.   The REN is used to determine the quantity of devices that may be   connected to a telephone line. Excessive RENs on a telephone line may   result in the devices not ringing in response to an incoming call. In most,   but not all areas, the sum of the RENs should not exceed five (5.0). To be   certain of the number of devices that may be connected to a line, as   determined by the total RENs, contact the telephone company.   For products approved after July 23, 2001, the REN for this product is part   of the product identifier that has the format US: 1KRM500BUNAPSTN.   The digits represented by 00 are the REN without a decimal point (e.g., 03   is a REN of 0.3). For earlier products, the REN separately shown on the   label.   Download from Www.Somanuals.com. All Manuals Search And Dow3nl-oGadB.   If this equipment causes harm to the telephone network, the telephone   company will notify you in advance that temporary discontinuance of   service may be required. But if advance notice is not practical, the   telephone company will notify the customer as soon as possible. Also, you   will be advised of your right to file a complaint with the FCC if you believe   it is necessary.   The telephone company may make changes in its facilities, equipment,   operations or procedures that could affect the operations of the equipment.   If this happens, the telephone company will provide advance notice in   order for you to make the necessary modifications in order to maintain   uninterrupted service.   If trouble is experienced with this equipment, please contact 1-800-222-   SONY (7669), or write to the Sony Customer Information Service Center, at   12451 Gateway Blvd., Fort. Myers, Fl 33913 for repair and (or) warranty   information.   If the equipment is causing harm to the telephone network, the telephone   company may request you remove the equipment until the problem is   resolved.   Repair of this equipment should be made only by a Sony Service Center or   Sony authorized agent. For the Sony Service Center nearest you, call 1-800-   222-SONY (7669).   This equipment can not be used on public coin service. Connection to   Party Line Service is subject to state tariffs. (Contact the state public utility   service commission, public service commission, or corporation commission   for information.)   If your home has specially wired alarm equipment connected to the   telephone line, ensure the installation of this equipment does not disable   your alarm equipment.   If you have questions about what will disable alarm equipment, consult   your telephone company or a qualified installer.   4-GB   Download from Www.Somanuals.com. All Manuals Search And Download.   Fo r t h e Cu st o m e rs in CANADA   This Class B digital apparatus complies with Canadian ICES-003.   INDUSTRY CANADA NOTICE   This product meets the applicable Industry Canada technical   specifications.   The Ringer Equivalence Number (REN) is an indication of the maximum   number of devices allowed to be connected to a telephone interface. The   termination on an interface may consist of any combination of devices   subject only to the requirement that the sum of the RENs of all the devices   does not exceed five.   Download from Www.Somanuals.com. All Manuals Search And Dow5nl-oGadB.   Fo r t h e Cu st o m e rs in Eu ro p e   Hereby, Sony Corporation, declares that this USB-PSTN modem adaptor is   in compliance with the essential requirements and other relevant   provisions of the Directive 1999/ 5/ EC.   For details, please access the following URL:   http:/ / www.compliance.sony.de/   This equipment is in compliance with the requirements of the directive   1999/ 5/ EC (R&TTE), to be connected with all European analogue PSTN.   However, due to differences between the individual PSTNs provided in   the different countries, the compliance does not, on itself, give an   unconditional assurance of successful operation on every PSTN network   termination point. In the event of problems, you should contact your   equipment supplier in the first instance.   If the plug of exclusive modem cable is not match with the telephone   terminal jack, attach an optional plug adaptor. The plug type of the   exclusive modem cable is the RJ-11 type.   6-GB   Download from Www.Somanuals.com. All Manuals Search And Download.   Ta b le o f co n t e n t s   Precautions on Use ............................................................................................... 8   Precautions on Handling ..................................................................................... 9   Maintenance .......................................................................................................... 9   Parts identification ............................................................................................. 10   Before Use ............................................................................................................ 10   Setting up the unit .............................................................................................. 11   Preparation .......................................................................................................... 14   Connecting to a telephone line with a PSTN modem adaptor ............. 14   Accessing the Internet ................................................................................ 15   Disconnecting the USB-PSTN modem adaptor from your camcorder ....... 16   Troubleshooting .................................................................................................. 17   Specifications ....................................................................................................... 18   In t ro d u ct io n   • USB connection enables data transmission between an Internet and a   USB network adaptor compatible camcorder via a modem.   • The USB-PSTN modem adaptor is a bus powered device and therefore   requires no power supply.   Tra d e m a rk   The system names and product names recorded in this instruction manual   are in general registered trademarks or trademarks of their respective   developing manufacturers. This instruction manual does not specify ™   and ® signs.   Download from Www.Somanuals.com. All Manuals Search And Dow7nl-oGadB.   Pre ca u t io n s o n Use   Wh e re n o t t o p la ce t h is d e vice   Regardless of whether the USB-PSTN modem adaptor is in use or in   storage, do not place it in any of the following locations. Doing so may   lead to breakdown.   • Locations of extremely high temperature   The temperature gets extremely high inside a car with the windows   closed in summer or in strong sunshine, and leaving the USB-PSTN   modem adaptor inside may cause it to be deformed or break down.   • Locations with excessive humidity, dust, soot or steam   Using the USB-PSTN modem adaptor in such an environment may lead   to fire or electric shock.   • Locations where young children can touch it   There is a risk of injury, electric shock and breakdown.   • Only use a designated connecting cable   Using a connecting cable not specified in this manual may lead to fire or   breakdown.   • Avoid incorrect connection   - Do not allow any small pieces of metal inside the connector.   A short between pins may lead to fire or breakdown.   - Insert the connector completely straight. Inserting it at an angle can cause   a short between pins, which may lead to fire or breakdown.   • Unplug the telephone cable before moving the USB-PSTN modem   adaptor   Moving it with the telephone cable still connected may damage the cable   or lead to fire, electric shock, or injury if the USB-PSTN modem adaptor   drops or falls over. Also be careful not to drop the USB-PSTN modem   adaptor.   • In direct sunlight or near a heater   There is a risk of deformation or breakdown.   • Locations of excessive vibration   • Locations with strong electromagnetism   • Locations with excessive sand   In locations such as the seashore and other sandy areas or where dust   clouds occur, protect the USB-PSTN modem adaptor from sand and dust.   There is a risk of breakdown.   8-GB   Download from Www.Somanuals.com. All Manuals Search And Download.   Pre ca u t io n s o n Ha n d lin g   • Using the USB-PSTN modem adaptor reduces the amount of time you   can use your camcorder, because they share the camcorder’s battery.   • When not using the USB-PSTN modem adaptor, disconnect it from your   camcorder to prevent your camcorder’s battery from going flat.   • Do not lift your camcorder by the USB-PSTN modem adaptor or its   cable.   • Do not pull out the connector by pulling the cable.   • Do not bend or apply excessive force to the cable.   Ma in t e n a n ce   Wipe the USB-PSTN modem adaptor with a soft dry cloth. If the USB-   PSTN modem adaptor is very dirty, wipe it using a cloth with a little   neutral solvent added, and then wipe it dry again.   Do not use thinners, benzine, alcohol, etc., as they will damage the surface   of the USB-PSTN modem adaptor.   Download from Www.Somanuals.com. All Manuals Search And Dow9nl-oGadB.   Pa rt s id e n t ifica t io n   When connecting the USB-PSTN modem adaptor, do so correctly by   checking the shape of the connectors.   1 POWER lamp (green)   2 ON LINE lamp (orange)   3 DATA lamp (orange)   4 USB connector   5 RJ-11 connector   6 Switch cover   7 AREA CODE switches   8 TONE/ P1 (PULSE10)/ P2 (PULSE20) selector   USB connector : For connection to USB compatible camcorders   RJ-11 connector : For connection to a telephone cable   Be fo re Use   • This USB-PSTN modem adaptor is exclusively for use with a USB   network adaptor compatible camcorder. Before use, refer to your   “Network Function/ Application Operating Instructions”.   10-GB   Download from Www.Somanuals.com. All Manuals Search And Download.   Se t t in g u p t h e u n it   You must make certain settings before you can connect the unit to your   telephone line. Choose the proper settings for your telephone signaling   type. You also have to set the AREA CODE switches according to your   area.   2 4 3 (1) Be sure that this unit is not connected to the USB-PSTN modem   adaptor compatible camcorders or a RJ-11 cable (telephone cable).   (2) Open the switch cover.   (3) Select the telephone signaling type with the TONE/ P1 (PULSE10)/ P2   (PULSE20) selector.   TONE: When your phone line has tone signaling.   PULSE10: When your phone line has pulse signaling.   PULSE20: Normally, this is not used. For details, see “To check the dial   speed of a pulse dialing phone” on page 12.   zTips   • How can I tell if my phone has tone signaling?   You can hear the touch pad sound from your phone when you press the   number button.   • How can I tell if my phone has pulse signaling?   You can hear clicking sounds from your phone when you press the   number button.   (4) Set up the AREA CODE switches according to your area.   For details, see “The setup of the AREA CODE switches” on page 13.   11-GB   Download from Www.Somanuals.com. All Manuals Search And Download.   Se t t in g u p t h e u n it (co n t in u e d )   (5) Close the cover.   The setting is completed.   Notes   • If the TONE/ P1 (PULSE10)/ P2 (PULSE20) selector is not set to the   appropriate position, you cannot communicate with the camcorder.   • If you cannot check the dial speed of your pulse dialing phone, set the   TONE/ P1 (PULSE10)/ P2 (PULSE20) selector to P1 (PULSE10).   • In some countries and areas, TONE/ P1 (PULSE10)/ P2 (PULSE20) setting   is not required.   In such a country or area, the USB-PSTN modem adaptor communicates   by the telecom protocol in that country or area, regardless of the TONE/   P1 (PULSE10)/ P2 (PULSE20) setting.   To ch e ck t h e d ia l sp e e d o f a p u lse d ia lin g p h o n e   You can change the dialing speeds of some pulse dial phones. To check the   dial speed, switch the dial speed selector on the phone and check the   clicking sound. The slower one is the normal setting. When you select the   fast dial speed, set the TONE/ P1 (PULSE10)/ P2 (PULSE20) selector to P2   (PULSE20).   12-GB   Download from Www.Somanuals.com. All Manuals Search And Download.   Th e se t u p o f t h e AREA CODE sw it ch e s   The default AREA CODE setting is “Japan”.   Set the AREA CODE switches to the appropriate positions using a sharp-   pointed object following the information given in the table below. You   cannot use the unit in areas other than the areas indicated on the table.   TONE   P1   P2   Notes   • “1” for the parameter in the table indicates that setting the switch to the   ON side.   • The relationship between the 6-digit numbers in the table and the switch   positions is as illustrated below.   (e. g., when you set to Japan) (e. g., when you set to the USA)   Th e se t u p list fo r t h e AREA CODE sw it ch   Country   or area   Parameter   Country   or area   Parameter   Country   or area   Parameter   Japan   000000   100000   010000   110000   001000   111000   000100   100100   010100   Greece   110100   101100   011100   010010   110010   001010   011010   111010   100110   Sweden   010110   110110   001110   United States   Australia   Austria   Ireland   Switzerland   Taiwan   Italy   Netherlands   New Zealand   Norway   Portugal   Singapore   Spain   United Kingdom 101110   Belgium   Denmark   Finland   Canada   100000   100000   001000   Hong Kong   Luxembourg   France   Germany   13-GB   Download from Www.Somanuals.com. All Manuals Search And Download.   Pre p a ra t io n   To connect to the Internet, first you must connect the USB-PSTN modem   adaptor to a USB network adaptor-compatible camcorder.   Co n n e ct in g t o a t e le p h o n e lin e w it h a   PSTN m o d e m a d a p t o r   Connect to the Internet via a telephone line using a USB-PSTN modem   adaptor.   1 Connect the supplied telephone cable to this unit and the   modular jack of the telephone.   14-GB   Download from Www.Somanuals.com. All Manuals Search And Download.   2 Attach the USB-PSTN modem adaptor’s USB connector to   (USB) jack of your camcorder.   Note   The position of (USB) jack varies from model to model.   For details, refer to your USB network adaptor compatible camcorder’s   instruction manual.   3 Set your USB netw ork adaptor compatible camcorder’s pow er   sw itch to “MEMORY/NETWORK” to display the Netw ork   Menu.   Your camcorder is now ready for communication.   Note   Connect the USB-PSTN modem adaptor directly to your USB network adaptor   compatible camcorder. The camcorder is not compatible with a USB hub.   Acce ssin g t h e In t e rn e t   For details of how to log on, refer to your USB network adaptor compatible   camcorder’s “Network Function/ Application Operating Instructions”.   15-GB   Download from Www.Somanuals.com. All Manuals Search And Download.   Disco n n e ct in g t h e USB-PSTN m o d e m   a d a p t o r fro m yo u r ca m co rd e r   1 Remove the USB-PSTN modem adaptor’s USB connector from   (USB) jack of your camcorder.   2 Remove the telephone cable from the USB-PSTN modem   adaptor.   16-GB   Download from Www.Somanuals.com. All Manuals Search And Download.   Tro u b le sh o o t in g   Before sending the USB-PSTN modem adaptor for repairs, read this   manual and the support information on our website   http:/ / www.sony.net/ . If the USB-PSTN modem adaptor still does not   work properly, consult your Sony dealer or local authorized Sony service   facility.   Sym p t o m   Ca u se /Me a su re s   A USB error occurs   • Check that the USB-PSTN modem adaptor is   correctly connected to the USB terminal of your   USB network adaptor compatible camcorder. If   it is not, reconnect it.   ex) Connection Error   Connect USB Device   A PPP error occurs   • The AREA CODE switch is incorrectly set.   ex) Connection Error   Check phone line   c Set it correctly. For details, see “Setting up   the unit” (page 11).   • The line is busy. (Another device is using the   phone line.)   c Try again when the other device has stopped   communicating.   • Cannot connect to the other telephone line.   c Wait a while before trying again.   • Cannot communicate well sometimes   depending on the status of the telephone line.   c Turn off the camcorder, turn it back on, then   try to communicate again.   • The USB-PSTN modem adaptor cannot be used   with a home or business telephone line. (Never   connect it to a home or business telephone line.   Doing so can lead to malfunction, overheating   and fire.)   17-GB   Download from Www.Somanuals.com. All Manuals Search And Download.   Sp e cifica t io n s   Mo d e m p a rt   Applicable line   Analog telephone line   Interface for the telephone circuit 2 line ceremony interface   NCU   AA   Dial type   Pulse dialing (10/ 20 pps)   Tone dialing   NCU command   AT command   Communication format   Sending communication rate   Dual   300/ 1200/ 2400/ 4800/ 7200/ 9600/   12000/ 14400/ 16800/ 19200/ 21600/   24000/ 26400/ 28800/ 31200/ 33600 bps   300/ 1200/ 2400/ 4800/ 7200/ 9600/   12000/ 14400/ 16800/ 19200/ 21600/   24000/ 26400/ 28800/ 31200/ 33600/   34000/ 34667/ 36000/ 37333/ 38000/   38667/ 40000/ 41333/ 42000/ 42667/   44000/ 45333/ 46000/ 46667/ 48000/   49333/ 50000/ 50667/ 52000/ 53333/   54000/ 54667/ 56000 bps   Receiving communication rate   Modulation mode standard   ITU-T V.21/ V.22/ V.22bis/ V.32/   V.32bis/ V.34/ V.90, BELL 212A/   103, K56flex™   Sender sensitivity   Error correction   Data compression   –10 to –15 dBm   MNP Class 4/ 10, ITU-T V.42   MNP Class 5, ITU-T V.42bis   USB in t e rfa ce p a rt   Telecommunication standard   Interface connector   Transmission rate   USB compatible   Mini-A plug   max. 12 Mbps   Power supply   Bus-powered   Operating voltage   Power consumption   DC 5 V (supplied by USB interface)   max. 250 mA   18-GB   Download from Www.Somanuals.com. All Manuals Search And Download.   Ge n e ra l   Outer dimensions   approx. 86 × 17.1 × 65 mm   (3 1/ 2 × 11/ 16 × 2 5/ 8 in)   (width × height × depth)   approx. 54 g (1.9 oz)   0°C ~ +40°C   Weight   Operating temperature   Storage temperature   –20°C ~ +60°C   Acce sso rie s   Telephone cable (1)   Operating Instructions   Design and specifications are subject to change without notice.   19-GB   Download from Www.Somanuals.com. All Manuals Search And Download.   Fra n ça is   Avant d’utiliser cet appareil, veuillez lire attentivement ces explications,   puis conservez-les de manière à pouvoir les consulter.   AVERTISSEMENT   N’exposez pas cette unité à la pluie ou à l’humidité. Risques d’incendie ou   de chocs électriques.   Pa ys e t ré g io n s   Ce produit est destiné à être utilisé dans les régions et pays suivants :   Allemagne, Australie, Autriche, Belgique, Canada, Danemark, Etats-Unis,   Finlande, France, Grèce, Hong Kong, Irlande, Japon, Luxembourg,   Nouvelle-Zélande, Norvège, Pays-Bas, Portugal, Singapour, Suède, Suisse ,   Royaume-Uni, Italie, Espagna et Taiwan   In fo rm a t io n re la t ive à la ré g le m e n t a t io n   Po u r la clie n t è le a u Ca n a d a   Cet appareil numérique de la classe B est conforme à la norme NMB-003   du Canada.   Co n d it io n s d ’u t ilisa t io n   L’utilisation est sujette aux deux conditions suivantes : (1) ce dispositif ne   doit pas produire d’interférences et (2) ce dispositif doit accepter toutes les   interférences reçues, y compris les interférences qui peuvent provoquer un   fonctionnement non souhaité du dispositif.   AVIS DE L’INDUSTRIE CANADA   Le présent matériel est conforme aux spécifications techniques applicables   d’Industrie Canada.   L’indice d’équivalence de la sonnerie (IES) sert à indiquer le nombre   maximal de termiaux qui peuvent être raccordés à une interface   téléphonique. La terminaison d’une interface peut consister en une   combinaison quelconque de dispositifs, à la seule condition que la somme   d’indices d’équivalence de la sonnerie de tous les dispositifs n’excède pas   5.   L’indice d’équivalence de la sonnerie de ce matériel est de 0.2.   2-FR   Download from Www.Somanuals.com. All Manuals Search And Download.   A l’a t t e n t io n d e la clie n t è le e u ro p é e n n e   Par la présente, Sony Corporation déclare que cet adaptateur modem USB-   PSTN est conforme aux exigences essentielles et aux autres dispositions   pertinentes de la directive 1999/ 5/ CE.   Pour plus de détails, consulter notre site URL :   http:/ / www.compliance.sony.de/   Cet équipement est conforme aux exigences de la directive 1999/ 5/ EC   (R&TTE) pour être connecté à tous les PSTN analogues européens.   Cependant, étant donné que des différences existent entre les PSTNs   individuels fournis dans chaque pays, la conformité à la directive ne   garantit pas de façon inconditionnelle le bon fonctionnement des points   d’arrivée de tous les réseaux PSTN. En cas de problème, contactez avant   toute chose votre fournisseur local.   Au cas où la prise d’un câble de modem ne correspondrait pas à la   connexion téléphonique, vous devrez utiliser un adaptateur en option. La   prise du câble de modem exclusif est de type RJ-11.   3-FR   Download from Www.Somanuals.com. All Manuals Search And Download.   Ta b le d e s m a t iè re s   Précautions d’utilisation ...................................................................................... 5   Précautions de manipulation .............................................................................. 6   Entretien ................................................................................................................. 6   Nomenclature des pièces ..................................................................................... 7   Avant la mise en service ...................................................................................... 7   Configuration de l’unité ...................................................................................... 8   Préparation .......................................................................................................... 11   Connexion à une ligne de téléphone via un adaptateur   modem PSTN ............................................................................................... 11   Accès à Internet ........................................................................................... 12   Déconnexion de l’adaptateur modem USB-PSTN et du caméscope ........... 13   Dépannage ........................................................................................................... 14   Caractéristiques techniques .............................................................................. 15   In t ro d u ct io n   • Les connexions USB servent à transmettre les données par modem entre   un caméscope compatible avec une carte réseau USB et Internet.   • La carte modem USB-PSTN étant alimentée par un bus elle ne nécessite   aucun raccordement électrique.   MARQUE DES PRODUITS   Les noms de produits et de systèmes apparaissant dans ce manuel sont en   général des marques enregistrées ou des marques appartenant aux   fabricants qui les ont mises au point. Aucun signe ™ ou ® ne les précède   dans ce manuel.   4-FR   Download from Www.Somanuals.com. All Manuals Search And Download.   Pré ca u t io n s d ’u t ilisa t io n   En d ro it s o ù il n e fa u t p a s p la ce r le d isp o sit if   Qu’il soit en service ou rangé, l’adaptateur modem USB-PSTN ne devra   pas être posé dans les types d’endroits suivants au risque de   l’endommager.   • Endroits à température très élevée   Ne posez pas l’adaptateur modem USB-PSTN dans une voiture fermée   en plein été ou lorsqu’elle est garée en plein soleil car la température de   l’habitacle atteint des degrés susceptibles d’endommager le dispositif ou   de la déformer.   • Endroits fortement chargés d’humidité, de fumée, de poussière ou de   vapeur.   L’utilisation de l’adaptateur modem USB-PSTN dans ce type   d’environnement risque de provoquer des incendies ou des chocs   électriques.   • Endroits accessibles aux jeunes enfants   Risques de blessures corporelles, de chocs électriques ou de détérioration   du dispositif.   • Utilisez exclusivement le câble préconisé.   L’utilisation d’un câble autre que celui qui est indiqué dans ce manuel   risque de provoquer un incendie ou de détériorer le dispositif.   • Evitez les connexions incorrectes   - Ne laissez pas des morceaux de métal dans les connecteurs.   Un court-circuit entre les broches peut être à l’origine d’un incendie ou   détériorer le dispositif.   - Insérez le connecteur bien droit. S’il est rentré en biais il peut se produire   un court-circuit entre les broches avec les risques d’incendie ou de   détérioration du dispositif.   • Débranchez le câble de téléphone avant de déplacer l’adaptateur modem   USB-PSTN   Si vous déplacez l’adaptateur mode USB-PSTN sans débrancher le câble   électrique vous risquez d’endommager le câble ou de provoquer un   incendie, des chocs électriques ou de vous blesser si l’adaptateur tombe   ou se renverse. Faites attention de ne pas faire tomber l’adaptateur   modem USB-PSTN.   • Sous les rayons de soleil ou près d’un chauffage   Risques de déformation ou de détérioration.   • Endroits soumis à de fortes vibrations   • Endroits fortement magnétisés   • Environnement très sablonneux   En bord de mer et dans les autres types de régions sableuses ou soumises   à des nuages de poussière protégez l’adaptateur modem USB-PSTN du   sable et de la poussière. Risques de détérioration.   5-FR   Download from Www.Somanuals.com. All Manuals Search And Download.   Pré ca u t io n s d e m a n ip u la t io n   • L’adaptateur modem USB-PSTN réduit le temps d’utilisation du   caméscope dont il partage la pile.   • Débranchez l’adaptateur USB-PSTN du caméscope dès que vous ne   l’utilisez plus de façon à ne pas décharger la pile du caméscope.   • Ne soulevez pas le caméscope par l’adaptateur modem USB-PSTN ou   par le câble.   • Ne tirez pas le connecteur par le câble.   • Ne pliez pas le câble et ne le forcez pas.   En t re t ie n   Essuyez l’adaptateur modem USB-PSTN avec un chiffon doux et sec. S’il   est très sale appliquez un détergent neutre sur le chiffon que vous   essuierez ensuite avec un chiffon sec.   N’utilisez jamais de diluants, de benzine, d’alcool ou autre produits de ce   type qui détériorent la surface de l’adaptateur modem USB-PSTN.   6-FR   Download from Www.Somanuals.com. All Manuals Search And Download.   No m e n cla t u re d e s p iè ce s   Lorsque vous connectez l’adaptateur modem USB-PSTN, vérifiez la forme   des connecteurs qui vous guidera pour une connexion correcte.   1 Témoin POWER (vert)   2 Témoin ON LINE (orange)   3 Témoin DATA (orange)   4 Connecteur USB   5 Connecteur RJ-11   6 Cache de commutateur   7 Commutateurs de AREA CODE   8 Sélecteur TONE/ P1 (PULSE10)/ P2 (PULSE20)   Connecteur USB : Pour connecter un caméscope compatible USB   Connecteur RJ-11 : Pour connecteur un câble de téléphone   Ava n t la m ise e n se rvice   • Cet adaptateur modem USB-PSTN doit exclusivement être utilisé avec   un caméscope compatible avec une carte réseau USB. Avant de le mettre   en service, consultez les « Directives d’exploitation des fonctions/   applications réseau ».   7-FR   Download from Www.Somanuals.com. All Manuals Search And Download.   Co n fig u ra t io n d e l’u n it é   Avant de pouvoir connecter le dispositif sur une ligne téléphonique,   certains réglages sont nécessaires. Choisissez la configuration qui   correspond aux signaux téléphoniques de votre ligne. Vous devez   également régler les commutateurs de AREA CODE pour votre région.   2 4 3 (1) Vérifiez que le caméscope compatible avec une carte modem USB-   PSTN ou que le câble RJ-11 (câble téléphonique) ne sont pas connectés.   (2) Ouvrez le cache des commutateurs.   (3) Sélectionnez la signalisation téléphonique sur le sélecteur TONE/ P1   (PULSE10)/ P2 (PULSE20).   TONE : Si votre ligne téléphonique est à signalisation multifréquences.   PULSE10 : Si votre ligne téléphonique est à impulsions.   PULSE20 : Normalement inutilisé. Pour plus de détails voir   « Vérification de la vitesse de numérotation d’un appareil à   impulsions » à la page 9.   zConseils   • Comment savoir si mon téléphone est à signalisation multifréquences ?   Vous entendez le son du pavé tactile pour chaque touche que vous   enfoncez.   • Comment savoir si mon téléphone est à impulsions ?   Vous entendez le déclic de chaque numéro composé.   (4) Réglez les commutateurs AREA CODE pour votre région.   Pour plus de détails, voir « Réglage des commutateurs de AREA   CODE » à la page 10.   8-FR   Download from Www.Somanuals.com. All Manuals Search And Download.   (5) Fermez le cache.   La configuration est terminée.   Remarques   • La communication avec le caméscope n’est pas possible si le sélecteur   TONE/ P1 (PULSE10)/ P2 (PULSE20) n’est pas réglé sur la bonne   position.   • Si vous n’arrivez pas à connaître la vitesse de numérotation de votre   téléphone à impulsions positionnez le sélecteur TONE/ P1 (PULSE10)/ P2   (PULSE20) sur P1 (PULSE10).   • Dans certains pays ou régions le réglage de TONE/ P1 (PULSE10)/ P2   (PULSE20) n’est pas nécessaire.   Ceci du fait que dans ces régions l’adaptateur modem USB-PSTN   communique via le protocole de télécommunication de cette région ou de   ce pays lequel ne tient pas compte de la configuration TONE/ P1   (PULSE10)/ P2 (PULSE20).   Po u r vé rifie r la vit e sse d e n u m é ro t a t io n d ’u n t é lé p h o n e à   sig n a lisa t io n p a r im p u lsio n ca d ra n   Sur certains téléphones à impulsions vous pouvez modifier la vitesse de   numérotation. Ecoutez le son de numérotation quand vous commutez le   sélecteur du téléphone. La numérotation lente correspond au réglage   normal. Si vous voulez une numérotation plus rapide, positionnez le   sélecteur TONE/ P1 (PULSE10)/ P2 (PULSE20) sur P2 (PULSE20).   9-FR   Download from Www.Somanuals.com. All Manuals Search And Download.   Co n fig u ra t io n d e l’u n it é (su it e )   Ré g la g e d e s co m m u t a t e u rs d e AREA CODE   Par défaut le AREA CODE est réglé sur « Japon ».   A l’aide d’un objet pointu déplacez les commutateurs de AREA CODE sur   la position qui convient à votre secteur ; suivez les directives du tableau ci-   dessous. Il n’est pas possible d’utiliser cet appareil dans les régions ou   pays non indiqués dans le tableau.   TONE   P1   P2   Remarques   • Le paramètre « 1 » indique que le commutateur est réglé sur ON.   • Le rapport entre les numéros à 6 chiffres et la position du commutateur   sont indiqués ci-dessous.   (pour un réglage sur Japon)   (pour un réglage sur Etats Unis)   List e d e s ré g la g e s d u co m m u t a t e u r AREA CODE   Pays   ou zone   Paramètre   Pays   ou zone   Paramètre   Pays   ou zone   Paramètre   Japon   000000   100000   010000   110000   001000   111000   000100   100100   010100   Grèce   110100   101100   011100   010010   Suède   010110   110110   001110   101110   100000   100000   001000   Etats Unis   Australie   Autriche   Belgique   Danemark   Finlande   France   Irlande   Italie   Suisse   Taiwan   Pays-Bas   Royaume Uni   Canada   Nouvelle Zélande 110010   Norvège   Portugal   Singapour   Espagne   001010   011010   111010   100110   Hong Kong   Luxembourg   Allemagne   10-FR   Download from Www.Somanuals.com. All Manuals Search And Download.   Pré p a ra t io n   Pour vous connecter à Internet vous devez d’abord connecter l’adaptateur   modem USB-PSTN au caméscope compatible avec un adaptateur de   réseau USB.   Co n n e xio n à u n e lig n e d e t é lé p h o n e via u n   a d a p t a t e u r m o d e m PSTN   Connexion à Internet via une ligne de téléphone avec un adaptateur   modem USB-PSTN.   1 Connectez le câble de téléphone fourni à l’unité et à la prise   de téléphone modulaire.   11-FR   Download from Www.Somanuals.com. All Manuals Search And Download.   Pré p a ra t io n (su it e )   2 Raccordez le connecteur USB de l’adaptateur modem USB-   PSTN à la prise (USB) du caméscope.   Remarque   L’emplacement de la prise (USB) diffère d’un modèle à l’autre.   Pour plus de détails consultez le mode d’emploi du caméscope compatible avec   un adaptateur réseau USB.   3 Réglez le commutateur du caméscope compatible avec un   adaptateur réseau USB sur « MEMORY/NETWORK » pour   afficher le menu réseau.   Votre caméscope est maintenant prêt pour la communication.   Remarque   Connectez directement l’adaptateur modem USB-PSTN sur votre caméscope   compatible avec un adaptateur réseau USB. Le caméscope n’est pas compatible   avec un concentrateur USB.   Accè s à In t e rn e t   Les détails pour entamer une session sont indiqués dans les « Directives   d’exploitation des fonctions/ applications réseau » USB de votre   caméscope.   12-FR   Download from Www.Somanuals.com. All Manuals Search And Download.   Dé co n n e xio n d e l’a d a p t a t e u r m o d e m   USB-PSTN e t d u ca m é sco p e   1 Retirez le connecteur USB de l’adaptateur modem USB-PSTN   de la prise (USB) de votre caméscope.   2 Retirez le câble de téléphone de l’adaptateur modem USB-   PSTN.   13-FR   Download from Www.Somanuals.com. All Manuals Search And Download.   Dé p a n n a g e   Avant d’envoyer votre adaptateur modem USB-PSTN en réparation lisez   ce manuel et les aides en ligne de notre site Internet   http:/ / www.sony.net/ . Si l’adaptateur modem USB-PSTN ne fonctionne   toujours pas correctement, appelez votre distributeur Sony ou un service   de dépannage agrée de Sony.   Sym p t o m e s   Ca u se /Re m è d e   Erreur de USB   ex) Connection Error   Connect USB Device   • Vérifiez la connexion de l’adaptateur modem   USB-PSTN à la borne USB de votre Caméscope   compatible avec un adaptateur réseau USB. Si la   connexion est mal faite, recommencez.   Erreur de PPP   • Mauvais réglage du AREA CODE.   ex) Connection Error   Check phone line   c Réglez correctement le commutateur. Pour   plus de détail, voir « Configuration de l’unité »   (page 8).   • La ligne est occupée. (Un autre appareil occupe la   ligne.)   c Essayez de nouveau lorsque l’autre appareil   aura terminé sa communication.   • Impossible de connecter une autre ligne de   téléphone.   c Attendez un moment avant de recommencer.   • La communication n’est pas toujours bonne en   fonction du statut de la ligne de téléphone.   c Eteignez le caméscope, rallumez-le et essayez   de nouveau d’établir une communication.   • L’adaptateur modem USB-PSTN ne peut pas être   utilisé sur une ligne de téléphone domestique ou   professionnelle. (Ne jamais connecter cet appareil   sur une ligne de téléphone domestique ou   professionnelle. Ceci risque de provoquer des   dysfonctionnements, une surchauffe et un   incendie.)   14-FR   Download from Www.Somanuals.com. All Manuals Search And Download.   Ca ra ct é rist iq u e s t e ch n iq u e s   Mo d e m   Ligne téléphonique   Interface pour le   circuit téléphonique   NCU   Analogique   interface cérémonie 2 lignes   AA   Dial type   Composition au cadran (10/ 20 pps)   Composition au clavier   Commande NCU   Commande AT   Format de communication   Sending communication rate   Double   300/ 1200/ 2400/ 4800/ 7200/ 9600/   12000/ 14400/ 16800/ 19200/ 21600/   24000/ 26400/ 28800/ 31200/ 33600 bps   300/ 1200/ 2400/ 4800/ 7200/ 9600/   12000/ 14400/ 16800/ 19200/ 21600/   24000/ 26400/ 28800/ 31200/ 33600/   34000/ 34667/ 36000/ 37333/ 38000/   38667/ 40000/ 41333/ 42000/ 42667/   44000/ 45333/ 46000/ 46667/ 48000/   49333/ 50000/ 50667/ 52000/ 53333/   54000/ 54667/ 56000 bps   Receiving communication rate   Norme de modulation   ITU-T V.21/ V.22/ V.22bis/ V.32/   V.32bis/ V.34/ V.90, BELL 212A/   103, K56flex™   Sensibilité d’envoi   –10 à –15 dBm   Correction d’erreur   Compression des données   MNP Classe 4/ 10, ITU-T V.42   MNP Classe 5, ITU-T V.42bis   In t e rfa ce USB   Norme de télécommunication   Connectteur d’interface   Vitesse de transmission   Alimentation électrique   Tension de service   Compatible USB   Prise Mini-A   max. 12 Mbps   Par Bus   CC 5 V (fournie par l’interface USB)   max. 250 mA   Consommation électrique   15-FR   Download from Www.Somanuals.com. All Manuals Search And Download.   Ca ra ct é rist iq u e s t e ch n iq u e s (su it e )   Gé n é ra le s   Dimensions extérieures   environ 86 × 17,1 × 65 mm   (3 1/ 2 × 11/ 16 × 2 5/ 8 po)   (largeur × hauteur × profondeur)   54 g (1,9 on)   Poids approximatif   Température de fonctionnement   Température de stockage   0°C à +40°C   –20°C à +60°C   Acce sso ire s   Câble de téléphone (1)   Consignes d’exploitation   La conception et les spécifications peuvent être modifiées sans avis   préalable.   16-FR   Download from Www.Somanuals.com. All Manuals Search And Download.   Download from Www.Somanuals.com. All Manuals Search And Download.   Printed on 100% recycled paper using VOC (Volatile   Organic Compound)-free vegetable oil based ink.   Sony Corporation Printed in Japan   Download from Www.Somanuals.com. All Manuals Search And Download.   |