Note
On t h e re m o t e co n t ro l
BVa rio u s w a ys o f
p la yb a ck
A
B
Re p e a t p la y
List e n in g t o t ra cks in a sp e cific
g ro u p (Gro u p Mo d e Pla yb a ck)
Playback w hen group mode is off:
Playback starts w ith the first track in the
disc, and stops w ith the last track in the
Depending on the specifications of your MD
recorder, the group function will not work.
3-234-033-13(1)
Track number
The elapsed time
Track name
Group name
1
2
Insert a disc which has group settings
into the player and play the disc.
You can use this function to repeat playback
in normal play, single play, shuffle play, or
program play mode.
Track number
Remote control
Getting started
Playing an MD
The number of total
tracks in the group
PLAYMODE
RPT/ENT
Hold down PLAYMODE until
“– – –” in the display.
Ad ju st in g t h e so u n d q u a lit y
(Dig it a l So u n d Pre se t )
Charge the supplied rechargeable battery before using it for the first time.
disc.
DISPLAY
SOUND
1
Press RPT/ ENT on the remote control
during playback.
The number of
total tracks
Disc name
Disc
Portable MiniDisc Player
The player enters group skip mode.
1
Insert an MD.
X
Track number
“
” appears in the display.
Track number
Track mode
You can emphasize the treble and bass to suit
your taste. The player can store two sets of
treble-bass adjustments, which can set be
selected later during playback.
1
3
Within 5 seconds, turn the control
repeatedly until the name or number
of the desired group appears.
Insert the rechargeable battery.
1 Slide OPEN to open the lid.
2 Insert an MD.
3 Close the lid.
1 2 3
4
5 6
7 8
Repeat play indication
Operating instructions
Insert the battery minus end first
z
3
The group name appears when you select the
group on group skip mode. For more details, see
“Selecting and playing specific groups” in
“Using the group function.”
HOLD
When there is a group name (Example: AAA)
Playback w hen group mode is on:
./N>
To se le ct t h e so u n d q u a lit y
x
Playback of the selected group starts w ith
the first track in the group, and stops w ith
the last track in the group.
VOL +/–
b
b
1
Fa ct o ry se t t in g s
The factory settings of each digital sound
preset are as follows:
2
Notes
Se a rch in g fo r a sp e cific
t ra ck o r a p o sit io n q u ickly
(Qu ick Se a rch )
Bottom side of the player
• Depending on whether group mode is on or
off, the operating conditions, or the settings
may not be selectable or the indications that
appear may vary.
• The mode indication appears only during
playback. It appears for 2 seconds, and is then
replaced by the elapsed time of the current
track.
Group name
3 Color Info-LED
Disc
HOLD
“WALKMAN” is a trademark of Sony Corporation.
•
•
“SOUND1”: bass +1, treble ±0
“SOUND2”: bass +3, treble ±0
Insert an MD w ith the lable side facing up, pushing the
MD to the direction of the arrow in the illustration.
When there is no group name
Group 2
Group 3
Group 1
2
GROUP
Track
Track
Track
Charge the rechargeable battery.
MZ-E707
You can do two kinds of quick searches.
1
Press SOUND on the remote control
repeatedly to select “SOUND1” or
“SOUND2.”
number
number
number
•
In d e x se a rch — Searching quickly while
monitoring the track number or track name
(factory setting).
Sony Corporation © 2001 Printed in Japan
2
1 2 3
1 2
1 2
Ho w t o a sse m b le t h e b a t t e ry ch a rg in g
st a n d
Play an MD.
Group number
•
Tim e se a rch — Searching quickly while
monitoring the elapsed time.
On t h e p la ye r
2
VOL+
To a d ju st t h e so u n d q u a lit y
Insert the prongs until they are firmly attached.
VOLUME +/–
Su p p re ssin g t h e skip s o f
t h e so u n d (G-PROTECTION)
1
2
Insert a disc which has group settings
into the player and play the disc.
On t h e re m o t e co n t ro l
1
2
During playback, press SOUND on the
remote control repeatedly to select
“SOUND1” or “SOUND2.”
1
During playback, press DISPLAY on
the remote control for 2 seconds or
more.
GROUP
WARNING
VOL–
1
Insert a disc which has group settings
into the player, and then play the disc.
Se le ct in g t h e p la y m o d e
The G-PROTECTION function was developed
to provide a higher level of shock resistance
than that of existing players in order to allow
the player to be used while jogging.
Press GROUP.
The LED lights up orange and the
player enters group skip mode.
To p re ve n t fire o r sh o ck h a za rd , d o n o t e xp o se t h e
u n it t o ra in o r m o ist u re .
2
3
Turn the control on the remote control
repeatedly until “SEARCH” flashes in
the display, and press x on the remote
control.
1N>
You can select from various play modes using
the PLAYMODE and RPT/ ENT on the
remote control.
2
3
Press DISPLAY for 2 seconds or more.
to a w all outlet
Press SOUND on the remote control
for 2 seconds or more.
3
Within 5 seconds, press . or
> N repeatedly until the name or
number of the desired group appears.
Turn the control repeatedly until
“GROUP” flashes, and then press x on
the remote control.
X
Note
Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
.
3 Color Info-LED1)
The playback sound may skip if:
— the player receives stronger continuous
shock.
1
Press PLAYMODE repeatedly to select
one of the four play modes, as follows:
The player changes to the bass-setting
mode. Pressing SOUND for 2 seconds
or more again changes the player to
the treble-setting mode.
Turn the control on the remote control
repeatedly until “Index” (index search)
or “Time” (time search) flashes in the
display, and press x on the remote
control.
> N
b
x
To prevent fire, do not cover the ventilation of the apparatus with newspapers, table- cloths,
curtains, etc. And don’t place lighted candles on the apparatus.
Note
— a dirty or scratched MiniDisc is played.
x
.
4
Turn the control repeatedly until
“GROUP ON” flashes, and then press
x on the remote control.
Play mode indication
If no operation is performed within 5 seconds in
step 3, group skip mode is cancelled. To do the
procedure, start from step 2 again.
1 Turn the control towards N> on the remote control (or press > N
To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the
apparatus.
to DC IN 3V
on the player) to play the disc.
A short beep sounds in the headphones/ earphones when using the remote control.
The LED flashes and then lights up.
Make sure the CHARGE
lamp turns on.
“G” appears in the display and group
mode is turned on. To turn off group
mode, Select “GROUP OFF” and press
x.
AC pow er adaptor
Ch a n g in g p la yb a ck sp e e d
(Sp e e d Co n t ro l)
Speed control function is convenient for such
uses as language study.
4
5
Press X on the remote control to pause.
Certain countries may regulate disposal of the battery used to power this product. Please consult
with your local authority.
1 Connect the supplied AC power adaptor to DC IN 3V.
2 Place the player on the battery charging stand.
Re g ist e rin g g ro u p s u sin g yo u r
m in id isc re co rd e r
Display
Play mode
When you select bass-setting mode,
“B” appears. When you select treble-
setting mode, “T” appears.
2 Pull and turn VOL +/– on the remote control (or press VOLUME +/– on the
Turn and hold the control on the
remote control until the desired track
number/ track name (index search) or
the desired elapsed time (time search)
appears in the display.
(none)
(normal play)
All the tracks are played
once.
player) to adjust the volume.
The volume indicator appears in the display, allowing you to check the
volume level. After you adjust the volume, push back the control.
Ca u t io n
Full charging takes about 6 hours and then the CHARGE lamp will go off when
charging is complete.
If your MD recorder (MD deck or recording
MD Walkman) has a function for editing disc
names, you can use it to register groups even
if your recorder does not have the group
function.
Make sure you enter the text string exactly as
described below. The group function will not
work if you enter the text string incorrectly.
The use of optical instruments with this product will increase eye hazard.
On t h e p la ye r
The playing speed can be set at 80% to 110%
normal speed, in seven steps of 5% each.
“1”
(single play)
A single track is played
once.
3
Turn the control on the remote control
repeatedly to adjust the bass or the
treble.
Do n o t o p e ra t e t h e p la ye r w h e n yo u p la ce it o n t h e b a t t e ry ch a rg in g st a n d
o r d u rin g ch a rg in g . If yo u d o so , it m a y ca u se t h e p la ye r t o m a lfu n ct io n o r
p re ve n t t h e b a t t e ry fro m ch a rg in g .
CAUTION — INVISIBLE LASER RADIATION WHEN OPEN
DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS
In fo rm a t io n
1
2
Insert a disc which has group settings
into the player, and then play the disc.
To st o p p la y, p re ss x.
“SHUF”
(shuffle play)
All the tracks are played
in random order.
Playback starts from the point you last stopped playing. To start playback from the
beginning of the disc, turn and hold the control towards N> on the remote control
(or hold down > N on the player) for 2 seconds or more.
1) The LED indicates the current operating status by the lighting up in the following colors.
When the battery power is exhausted, the LED starts flashing. For more details, see
“When to replace or recharge the battery.”
1
2
During playback, press DISPLAY on
the remote control for 2 seconds or
more.
6
Press X on the remote control to cancel
the pause.
Example: While adjusting the bass,
the cursor moves. (Position: –2)
Press GROUP for 2 seconds or more.
The LED lights up green and group
mode is turned on. To turn off group
mode, press GROUP for 2 seconds or
more again. The LED lights up red.
Usin g t h e d ry b a t t e ry
“PGM”
Tracks are played in the
(program play) order that you specified.
Attach the dry battery case to the
player.
Insert the battery minus end first.
IN NO EVENT SHALL SELLER BE LIABLE FOR ANY DIRECT, INCIDENTAL OR CONSEQUENTIAL
DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM ANY DEFECTIVE
PRODUCT OR THE USE OF ANY PRODUCT.
z
Turn the control on the remote control
repeatedly until “SPEED” flashes in
the display, and then press x on the
remote control.
• If you do this procedure while the player is in
shuffle play mode, shuffle play starts from the
track that you selected.
To sp e cify g ro u p s
LED color
Red
Operating status
List e n in g t o t ra cks in a d e sire d
se q u e n ce (Pro g ra m Pla y)
3
–4
±0
+3
4
Normal play (The LED lights up continuously)
Group mode* (The LED lights up continuously)
Group skip mode* (The LED lights for about 5 seconds)
1
Change the disc name to the following
by using your MD recorder:
z
• If the player reaches to the first track or the last
track on the disc as you are turning the control
in step 5, it will return to the last track or the
first track, respectively. (In group mode, if the
player reaches to the first track or the last track
in a group as you are turning the control in step
5, it will return to the last track or the first track
in that group, respectively (see “Using the
group function”).
The sound can be adjusted in eight
steps, from –4 to +3.
The player changes to speed-setting
mode.
Green
• When group mode is on, it is possible to do
repeat play, shuffle play, or program play. For
details on the respective operations, see
“Selecting the play mode.”
2
Orange
b
1
During playback, press PLAYMODE
on the remote control repeatedly until
“PGM” flashes in the display.
0;[Disc name] // [First track of group 1 ]-
To set the other digital sound preset,
press SOUND to select “SOUND1” or
“SOUND2,” and then do steps 2 and 3.
1
*For more details, see “Using the group function.”
3
Turn the control to select the playback
speed.
Select the speed while listening the
sound.
“+” shows the normal speed and the
cursor shows the playback speed you
are selecting.
A
B
• It is possible to save group mode’s on/ off
setting in the personal disc memory.
• In group mode, turning the controls on the
remote control towards N> during
playback of the last track of a group moves
playback to the first track of the group.
Turning the control 2 times on the remote
control towards .while playing the first
track of a group moves playback to the last
track of the group.
To
Do this (Beeps2) in the headphones)
[Last track of group 1] // [Name of group 1 ]-
Insert a LR6 (size AA) alkaline dry battery.
To operate the player for the longest possible time, use the dry battery together
with a fully rechargeable battery.
Find the beginning of
the current track or
the previous track3)
Turn the control towards . on the remote control once
(three short beeps). (Or press . on the player once.)
Turn the control towards . on the remote control repeatedly
(continuous three short beeps). (Or press . on the player
repeatedly.)
4
Press RPT/ ENT on the remote control.
The sound settings are stored and the
playback display appears again.
B
C
[First track of group 2] // [Last track of group 2 ]-
2
Turn the control on the remote control
repeatedly to select a track number.
B
B
To se le ct a p re se t so u n d
Press SOUND repeatedly to select
“SOUND1,” “SOUND2.”
Selecting no display turns off the digital
sound preset function.
Usin g t h e g ro u p fu n ct io n
[Name of group 2] // ......
Find the beginning
of the next track4)
Turn the control towards N> on the remote control (two
short beeps).
3
Example: When the playback speed is
95% of the original speed, “–” and the
cursor w ill flash alternately.
Make connections and unlock the
The MZ-E707 can be used with a disc which
has group settings.
The group function is useful for playing a
great number of tracks, or tracks that have
been recorded in MDLP (LP2/ LP4) mode.
C
Press > N on the player once.
HOLD control.
A
B
C
Disc name
Track number
Group name
Track
Program number
Go backwards
while playing
Turn and hold the control towards
Hold down . on the player.
.
on the remote control.
Connect firmly.
number
Se le ct in g a n d p la yin g sp e cific
g ro u p s (Gro u p Skip Fu n ct io n )
z
Go forward
while playing
Turn and hold the control towards N> on the remote control.
/ / Separator between group names
3
Press RPT/ ENT on the remote control.
The track is entered.
You can set a preset sound while playback is
paused.
80% 100% 110%
Hold down > N on the player.
When playing a disc with group settings, the
group skip function allows you to jump from
the currently playing group to any other
group on the MD. The group skip function
can be used at any time during playback,
regardless of whether the player is in group
mode on or not.
;
Separator between track number and
Group name
To i jack
The playing speed can be set at 80% to
110% normal speed, in seven steps of
5% each.
Wh a t is a d isc w it h g ro u p
se t t in g s?
This is a disc with settings that organize
tracks into groups, and which allow those
groups to be selected.
The MZ-E707 does not support the recording
of group settings. Use your MD recorder to
record group information, and then use the
MZ-E707 for playback.
Pause
Press X on the remote control (continuous short beeps).
Press X on the remote control again to resume play.
Notes
(Ex.) Set the following groups for the disc
named “Collections ”:
• Settings cannot be changed using the operation
Remove the MD
Press x, and then slide OPEN.5)
buttons on the player.
4
Press x on the remote control to set the
playback speed.
During playback speeds other than
normal, “S” appears to the right of the
elapsed time.
Group name for tracks 1-7:
My Favorites“2001winter”
Group name for tracks 8-17:
Jun&Tac“sunshine head”
Group name for tracks 18-24:
THE NIGHT BUTTERFLYS
Group name for tracks 25-32:
Dream World/Kiss Me!
2)
• When using a digital sound preset, the sound
may break or become distorted if the volume is
turned up too high, depending on the settings
or the track.
You can turn off the beep sound. For more details, see “Turning off the beep sound.”
If you turn the control towards
4
5
Repeat steps 2 and 3 to select other
tracks in the desired sequence.
3)
4)
5)
.
on the remote control (or press
.
on the player) during the
first track of the disc, the player goes to the beginning of the last track on the disc.
If you turn the control towards N> on the remote control (or press > N on the player) during
the last track of the disc, the player goes to the beginning of the first track on the disc.
If you open the lid, the playback will begin from the beginning of the first track (except when disc
information is stored to the personal disc memory or when group mode is on).
When group mode is off:
Disc
Press RPT/ ENT for 2 seconds or more.
The settings are entered and playback
starts from the first programmed track.
Track number
BOt h e r o p e ra t io n s
HOLD
HOLD
Disc
z
1 2 3 5 6 7 8
4
z
• The program play settings will remain in
memory even after playback finishes or is
stopped.
• You can set the program play up to 20 tracks.
• The settings can be stored to the personal disc
memory.
Ho w t o u se t h e co n t ro l o n t h e re m o t e co n t ro l
Te xt st rin g e n t e re d :
0;Collections/ /
1-7; My Favorites“2001winter”/ /
8-17;Jun&Tac“sunshine head”/ /
18-24;THE NIGHT BUTTERFLYS/ /
25-32;Dream World/ Kiss Me!/ /
The MZ-E707 supports the newly developed DSP TYPE-R for ATRAC.
It thus allows you to enjoy TYPE-R high-quality sound from MDs recorded in SP stereo on TYPE-R-
equipped MD decks, etc.
Group 2
Group 3
Group 1
z
Vie w in g t h e t ra ck n a m e
a n d p la yin g t im e
Playback: Turn the control towards N> while the player is stopped.
FF : Turn and hold the control towards N> during playback.
REW: Turn and hold the control towards . during playback.
AMS: Turn the control towards . or N> during playback.
Although all settings will be lost when you
remove the disc from the player, the settings can
be stored to the personal disc memory. For more
details, see “Storing the settings for individual
discs.”
Track
number
Track
Track
skip
skip
skip
number
number
Note
When group mode is on:
Disc
You can check the track or disc name, track
number, the elapsed playing time of the
current track, the number of the tracks
recorded on the MD, the group name, and the
total number of tracks in a group.
1 2 3
4
5 6
7 8
When removing the disc, make sure to press x first, and then slide OPEN.
Notes
Group 1
Group 2 Group 3
Vie w in g t h e d isp la y w in d o w o f t h e re m o t e co n t ro l
N>
Play/FF/AMS
z
• All program settings are lost when the lid is
opened.
Note
z
• Up to 99* groups can be registered on a single
MD.
• The characters “;”, “/ ”, and “–” can be used in
a group name.
• You can register the same group name more
than twice on the same MD.
Track
number
Track
number
Track
number
The playback sound will be affected by the
If your recorder has a function for editing disc
names, you can use it to register groups. For
details, see “Registering groups using your
minidisc recorder.”
.
• If no settings are made for 5 minutes while the
player is stopped, the settings made up to that
point are entered.
• If you turn on group mode during program
play, the program play is canceled.
A
B
playback speed.
REW/AMS
Track number Track name6) or elapsed time of the track
Adjusting the volume (VOL +/–)
1 2 3 1 2
1 2
6)
Appears only with MDs that have been electronically labeled.
VOL+
1
Press DISPLAY on the remote control.
Each time you press DISPLAY, the
display changes as the follows:
• You can specify a group without entering a
group name (C) for it.
skip
skip
skip
z
• The player can play the track recorded by 2 × or 4 × long playing mode (LP2 or LP4). Normal stereo
playback, LP2 stereo playback, LP4 stereo playback or monaural playback is automatically selected to
match the audio source.
VOL–
* The actual number depends on the editing
ability of your recorder and may be less than 99
in some cases.
• The display on the remote control will turn off shortly after you press x.
Pull
Turn
Push back
Download from Www.Somanuals.com. All Manuals Search And Download.
|