3-859-139-11(1)
CD Radio
Cassette-Corder
Operating Instructions
CFD-Z110
CFD-Z120
CFD-Z130
1996 by Sony Corporation
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
Basic Operations
4 Playing a CD
6 Listening to the radio
8 Playing a tape
10 Recording on a tape
The CD Player
Additional Information
20 Precautions
12 Using the display
13 Locating a specific track
22 Troubleshooting
24 Maintenance
25 Specifications
26 Index
14 Playing tracks repeatedly
(Repeat Play)
15 Creating your own program
(Program Play)
Setting Up
16 Hooking up the system
19 Adjusting the audio emphasis
(ROTARY EQUALIZER/
MEGA BASS/SURROUND)
Introduction
3
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Playing a CD
1
2,3 4
For hookup instructions, see pages 16-18.
Display
1
2
Set FUNCTION to CD.
Press OPEN/CLOSE to open the
CD compartment and place the
CD on the CD compartment.
With the label side up
3
Close the CD compartment.
4
Press ^ .
The player plays all the tracks
once.
Track number Playing time
4
Basic Operations
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92
Download from Www.Somanuals.com. All Manuals Search And Download.
Use these buttons for additional operations
VOLUME FUNCTION OPEN/CLOSE
^
= / +
p
To
Do this
Adjust the volume
Stop playback
Pause playback
Turn VOLUME.
Press p.
Press ^.
Press the button again to
resume play after pause.
Go back to the previous track
Go to the next track
Remove the CD
Press =.
Press +.
Press OPEN/CLOSE.
Turn off the player
Set FUNCTION to
TAPE (CD/RADIO OFF) .
Basic Operations
5
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the radio
1
2
For hookup instructions, see pages 16-18.
1
2
Set FUNCTION to FM or AM to
select the band you want.
Turn TUNING to tune in a radio
station.
If the received FM stereo is too
weak, the reception becomes
monaural.
6
Basic Operations
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92
Download from Www.Somanuals.com. All Manuals Search And Download.
Use these buttons for additional operations
VOLUME FUNCTION
To
Do this
Adjust the volume
Turn off the radio
Turn VOLUME .
Set FUNCTION to
TAPE (CD/RADIO OFF) .
To improve broadcast reception
Reorient the antenna for FM. Reorient the player itself
for AM.
For FM
For AM
Basic Operations
7
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a tape
3 1
2
For hookup instructions, see pages 16-18.
1
2
Set FUNCTION to
TAPE (CD/RADIO OFF) .
Press p6 to open the tape
compartment and insert a
recorded tape. Use TYPE I
(normal) tape only. Close the
compartment.
With the side you want
to play facing forward
3
Press (.
The player starts playing.
8
Basic Operations
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92
Download from Www.Somanuals.com. All Manuals Search And Download.
Use these buttons for additional operations
VOLUME
0/)
p6
P
To
Do this
Adjust the volume
Stop playback
Turn VOLUME.
Press p6.
Fast-forward or rewind the tape
Pause playback
Press ) or 0.
Press P.
Press the button again to
resume play after pause.
Eject the cassette
Press p6.
Basic Operations
9
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording on a tape
3
2
1
For hookup instructions, see pages 16-18.
1
2
Press p6 to open the tape
compartment and insert a blank
tape. Use TYPE I (normal) tape
only.
With the side you want to
record on facing forward
Select the program source you
want to record.
Display
To record from the CD player, set
FUNCTION to CD and insert a
CD (see page 4).
To record from the radio, set
FUNCTION to FM or AM, and
tune in the station you want (see
page 6).
10 Basic Operations
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Press r to start recording. (( is
depressed automatically).
Tips
Use these buttons for additional operations
FUNCTION
• Adjusting the volume or
the audio emphasis (see
page 19) will not affect
the recording level and
quality.
• For the best results, use
the AC power as a
power source for
recording.
• To erase recording,
proceed as follows:
1 Insert the the tape
whose recording you
want to erase into the
tape compartment.
p6
P
2 Set FUNCTION to
TAPE (CD/RADIO
OFF).
To
Do this
3 Press r .
Stop recording
Pause recording
Press p6.
Press P.
Press the button again to
resume recording.
Turn off the player
Set FUNCTION to
TAPE (CD/RADIO OFF).
Basic Operations 11
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92
Download from Www.Somanuals.com. All Manuals Search And Download.
The CD Player
Using the display
DISPLAY/ENTER
You can check information about the CD
using the display.
Checking the total track numbers and playing
time
Check the display in stop mode.
Total track numbers
Total playing time
Checking the remaining time
Press DISPLAY/ENTER while playing a CD.
To display
Press DISPLAY/ENTER
Remaining time on the
current track*
Once
Remaining time on the CD
and the number of tracks left
Twice
Playing time and the current
track number
Three times
* For a track whose number is more than 20, the remaining
time appears as “- -:- -” in the display.
12 The CD Player
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92
Download from Www.Somanuals.com. All Manuals Search And Download.
Locating a specific
track
You can quickly locate any track using
the number buttons (CFD-Z120/Z130
only). You can also find a specific point
in a track while playing a CD.
Number
buttons
=/+
(CFD-Z120/Z130)
Note (CFD-Z120/Z130
To locate
Press
only)
a specific track directly
(CFD-Z120/Z130 only)
a number button of the
track.
You cannot locate a
specific track if “PGM”
or ”SHUF REP” is lit in
the display. Turn off
the indication by
a point while listening to
the sound
+ (forward) or =
(backward) while playing
and hold down until you
find the point.
pressing p.
a point while observing
the display
+ (forward) or =
(backward) in pause and
hold down until you find
the point.
Tip (CFD-Z120/Z130
only)
When you locate a
track numbered over
10, press >10 first, then
the corresponding
number buttons.
Example:
To play track number
23, press >10 first, then
2 and 3.
The CD Player 13
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing tracks
PLAY MODE
^
repeatedly
(Repeat Play)
=/+
You can play tracks repeatedly in
normal, shuffle or program play modes
(see page 15).
FUNCTION
1 Set FUNCTION to CD.
Tip (CFD-Z120/130 only)
You can select the
2 Press PLAY MODE until the repeat mode you
repeat mode on the
remote control. Press
MODE instead of
want appears in the display.
To repeat
Select
pressing PLAY MODE.
a single track
REP 1
all the tracks
REP ALL
SHUF REP
PGM REP
tracks in random order
programed tracks
3 Do either of the following to start repeat play:
• When you’ve selected REP 1, select the track by
pressing + or =, then press ^.
• When you’ve selected REP ALL and SHUF REP,
press ^.
• When you’ve selected PGM REP, program
tracks (see step 3 on page 15), then press ^.
To cancel Repeat Play
Press PLAY MODE until “REP” disappears in the
display.
14 The CD Player
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating your
DISPLAY/ENTER PLAY MODE
^
own program
(Program Play)
You can arrange the playing order of the
tracks on a CD.
=/+
FUNCTION
Tips
1 Set FUNCTION to CD.
• CFD-Z120/Z130 only:
You can select the track
on the remote control.
Press the number
2 Press PLAY MODE until “PGM” appears in the
display.
3 Press + or = then press DISPLAY/ENTER
for the tracks you want to program in the order
you want. You can program up to 20 tracks.
buttons for the track
instead of pressing
+/= and
DISPLAY/ENTER.
• You can play the same
program again, since
the program is saved
until you open the CD
compartment or switch
FUNCTION.
Programed track
Playing order
• The current program
will be erased if you
switch FUNCTION or
open the CD
4 Press ^ to start program play.
compartment.
To cancel Program Play
Press PLAY MODE until “PGM” disappears in the
display.
• You can record your
own program. After
you’ve created the
program, insert a blank
tape and press r to
start recording.
To check the order of tracks before play (CFD-Z120/
Z130 only)
Press DISPLAY/ENTER.
Every time you press the button, the track number
appears in the programed order.
To change the current program
Press p once if the CD is stopped and twice if the CD
is playing. The current program will be erased. Then
create a newprogram following the programing
procedure.
The CD Player 15
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up
Hooking up the
system
Speaker terminals
Make sure you turn off the power before
making any connections.
Left
speaker
Right
speaker
AC IN
Speaker cords
Battery compartment
To a wall outlet
1 Hooking up the speakers
1 Align the grooves and slide the speaker box down
Tips
until it snaps into place (A).
• To detach the speakers,
unlock speaker (see B
on the diagram) and
slide the speaker box all
the way up and away
from the player.
• Connect the speakers
for this unit only to the
speaker terminals of
this unit. If you connect
any other speakers or
equipment,
malfunction may occur.
2 Twist the speaker cable coating and strip it from
the end of the cable.
16 Setting Up
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Connect the black wires to (-) minus and the red
wires to (+) plus terminals; the right speaker wires
to the RIGHT and the left speaker wires to the
LEFT terminals of SPEAKER OUTPUT.
2 Connecting the AC power sources
Insert one end of the supplied AC power cord to the
AC IN socket located at the rear of the player, and the
other end to the wall outlet.
3 CFD-Z120/Z130 only: Inserting batteries
into the remote
Notes
• When you operate the
player on batteries, the
backlight in the display
does not light (CFD-
Z130 only).
• Use the AC power
source whenever you
record since recording
consumes much power.
Insert two size AA (R6) batteries (not supplied)
Replacing batteries
With normal use, the batteries should last for about
six months. When the remote no longer operates the
player, replace all the batteries with new ones.
Tip
Replace the batteries
when the OPR/BATT
indicator dims or when
the player stops
operating. Replace all
the batteries with new
ones. Before you
4 Using the player on batteries
Insert six size D (R20)
batteries (not supplied)
into the battery
compartment.
replace the batteries, be
sure to take out the CD
from the player.
To use the player on
batteries, disconnect the
AC power cord from the
player.
continued
Setting Up 17
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking up the system (continued)
5 Listening through the headphones
Insert the headphones to the PHONES jack at the rear.
PHONES
18 Setting Up
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the
SURROUND ROTARY EQUALIZER/
MEGA BASS
audio emphasis
(ROTARY EQUALIZER/
MEGA BASS/SURROUND)
You can adjust the audio emphasis of the
sound you are listening to.
Selecting the sound characteristic
Turn ROTARY EQUALIZER/MEGA BASS to select
the audio emphasis you want.
Frequency
coverage
Turn the control
clockwise
(to +10)
Turn the control
counterclockwise
(to -10)
MEGA BASS to increase heavy
to decrease heavy
bass sounds
100Hz
bass sounds
1kHz
to provide more
presence of
vocals
to provide less
presence of
vocals
10kHz
to increase the
brightness of the
sound or to reduce
tape hiss
to decrease the
brightness of the
sound or to reduce
tape hiss
CFD-Z130 only: Reinforcing the surround
effect
Depress SURROUND.
The dynamic sound, reproducing the concert-hall
presence, is gained. To return to normal sound, press
the button again.
Setting Up 19
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Precautions
On safety
On placement
• As the laser beam used in the CD
player section is harmful to the eyes,
do not attempt to disassemble the
casing. Refer servicing to qualified
personnel only.
• Do not leave the player in a location
near heat sources, or in a place subject
to direct sunlight, excessive dust or
mechanical shock.
• Do not place the player on an inclined
or unstable place.
• Should any solid object or liquid fall
into the player, unplug the player, and
have it checked by qualified personnel
before operating it any further.
• Do not place anything within 10 mm
of the side of the cabinet. The
ventilation holes must be
unobstructed for the player to operate
properly and prolong the life of its
components.
On power sources
• For AC operation, use the supplied
AC power cord; do not use any other
type.
• If the player is left in a car parked in
the sun, be sure to choose a location in
the car where the player will not be
subjected to the direct rays of the sun.
• The player is not disconnected from
the AC power source (mains) as long
as it is connected to the wall outlet,
even if the player itself has been
turned off.
• Since a strong magnet is used for the
speakers, keep personal credit cards
using magnetic coding or spring-
wound watches away from the player
to prevent possible damage from the
magnet.
• Unplug the player from the wall outlet
when it is not to be used for an
extended period of time.
• For battery operation, use six size D
(R20) batteries.
On operation
• If the player is brought directly from a
cold to a warm location, or is placed in
a very damp room, moisture may
condense on the lenses inside the CD
player section. Should this occur, the
player will not operate properly. In
this case, remove the CD and wait
about an hour for the moisture to
evaporate.
• When the batteries are not to be used,
remove them to avoid damage that
can be caused by battery leakage or
corrosion.
• The nameplate indicating operating
voltage, power consumption, etc. is
located at the rear.
• If the player has not been used for a
long time, set it in the playback mode
to warm it up for a few minutes before
inserting a cassette.
If you have any questions or problems
concerning your player, please consult
your nearest Sony dealer.
20 Additional Information
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on CDs
Notes on cassettes
• Before playing, clean the CD with a
cleaning cloth. Wipe the CD from the
center out.
• Break off the cassette tab from side A
or B to prevent accidental recording. If
you want to reuse the tape for
recording, cover the broken tab with
adhesive tape.
Side A
Tab for side A
Tab for side B
• Do not use solvents such as benzine,
thinner, commercially available
cleaners or anti-static spray intended
for vinyl LPs.
• To record on a tape with its tab broken
off, cover the respective tab hole for
side A or B with adhesive tape.
• Do not expose the CD to direct
sunlight or heat sources such as hot
air ducts, nor leave it in a car parked
in direct sunlight as there can be a
considerable rise in temperature
inside the car.
• The use of a cassette with more than
90 minutes of play time is not
recommended except for long,
continuous recording or playback.
• Do not stick paper or sticker on the
CD, nor scratch the surface of the CD.
• After playing, store the CD in its case.
If there is a scratch, dirt or fingerprints
on the CD, it may cause tracking error.
Additional Information 21
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Symptom
Remedy
The power does not come on.
• Connect the AC power cord securely.
• Make sure the batteries are inserted correctly.
There is no audio.
• Make sure the FUNCTION selector is set to the
function you want to operate.
• Adjust the volume.
• Unplug the headphones when listening through
speakers.
The audio is weak or has poor
quality.
• Replace all the batteries with new ones if they
are weak.
• Move the player away from the TV.
The picture of your TV becomes
unstable.
• If you are listening to an FM program near the
TV with an indoor antenna, move the player
away from the TV.
The CD does not play/“00 -- --“
• Make sure that the CD compartment is closed.
(CFD-Z110), “no disc”(CFD-Z120/ • Place the CD with the label surface up.
Z130) lights in the display even
when a CD is in place.
• Clean the CD (see page 21).
• Take out the CD and leave the CD compartment
open for about an hour to dry moisture
condensation.
• Make sure the FUNCTION selector is set to CD.
• Reduce the volume.
The sound drops out.
• Clean the CD, or replace it if the CD is badly
damaged
• Place the player in a location free from
vibration.
• Close the cassette compartment securely.
The tape does not move when you
press an operation button.
The REC r button does not
function/The tape does not play.
• Make sure the safety tab on the cassette is in
place.
• Clean the erasing heads (see page 24).
• Replace all the batteries with new ones if they
are weak.
The tape does not erase completely.
22 Additional Information
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Remedy
The tape does not record.
• Make sure the tape is inserted properly.
• Make sure the safety tab of the cassette is
in place.
The audio is weak/The audio
quality is poor.
• Clean the heads, pinch roller and capstan
(see page 24).
• Demagnetize the heads using a
demagnetizer (see page 24).
The sound is distorted.
• The TYPE II (high position) or TYPE IV
(metal) tape is being used. Use TYPE I
(normal) tape only.
The remote does not function.
• Replace all the batteries in the remote with
new ones if they are weak.
• Make sure that you are pointing the
remote at the remote sensor on the player.
• Remove any obstacles in the path of the
remote and the player.
• Make sure the remote sensor is not
exposed to strong light such as direct
sunlight or fluorescent lamp light.
• Move closer to the player when using the
remote.
After trying the above remedies, if you still have problems, unplug the AC power cord and
remove all the batteries. After all the indications in the display disappear, plug the power cord
and insert the batteries again. If the problem persists, please consult your nearest Sony dealer.
Additional Information 23
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Cleaning the lens
Demagnetizing the tape heads
If the lens becomes dirty, it may cause a
skipping of sound during CD operation.
Clean with a commercially available
blower.
After 20 to 30 hours of use, enough
residual magnetism will have built up
on the tape heads to begin to cause loss
of high frequency sound and hiss. At
this time, you should demagnetize the
heads and all metal parts in the tape
path with a commercially available tape
head demagnetizer.
Cleaning the tape heads and tape
path
Wipe the heads, the pinch roller and the
capstan with a cleaning swab slightly
moistened with cleaning fluid or alcohol
after every 10 hours of operation for
optimum playback and recording
quality. To make the best possible
recording, however, we recommend that
you clean all surfaces over which tape
travels before each recording.
Cleaning the cabinet
Clean the cabinet, panel and controls
with a soft cloth slightly moistened with
a mild detergent solution. Do not use
any type of abrasive pad, scouring
powder, or solvent, such as alcohol or
benzine.
Capstan
Erase head
Record/playback head
Pinch roller
Lens
After cleaning, insert a tape when the
areas cleaned are completely dry.
24 Additional Information
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION
With 3.2-ohm loads, both channel driven
from 150 - 10,000 Hz; rated 2 W per channel-
minimum RMS power, with no more than
10 % total harmonic distortion in AC
operation.
General
Speaker
Full range: 10 cm dia., 3.2 ohms, cone type (2)
Tweeter: 2cm (2)
Outputs
Headphones jack (stereo minijack)
For 16 - 68 ohms impedance headphones
Power output (excluding U.S. model)
2 .3 W + 2.3 W (3.2 ohms at 10 % harmonic
distortion in DC operation)
Power requirements
Other Specifications
CD player section
For CD radio cassette-corder:
230 V AC, 50 Hz (Australian model)
120 V AC, 60 Hz (Other models)
System
9 V DC, 6 size D (R20) batteries
For remote controller (CFD-Z120/Z130 only):
3 V DC, 2 size AA (R6) batteries
Power consumption
AC 20 W
Battery life
Compact disc digital audio system
Laser diode properties
Material: GaAlAs
Wave length: 780 nm
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a distance of
about 200 mm from the objective lens surface on
the optical pick-up block with 7 mm aperture.)
For CD radio cassette-corder:
FM recording
Sony R20P: approx. 13.5 h
Sony alkaline LR20: approx. 19 h
Tape playback
Spindle speed
200 r/min (rpm) to 500 r/min (rpm) (CLV)
Number of channels
2
Frequency response
20 - 20,000 Hz +1/-2 dB
Wow and flutter
Sony R20P: approx. 7.5 h
Sony alkaline LR20: approx. 12 h
CD playback
Below measurable limit
Radio section
Sony R20P: approx. 2.5 h
Sony alkaline LR20: approx. 4.5 h
Frequency range
FM: 87.6 - 108 MHz
AM: 530 - 1,605 kHz (Australian model)
530 - 1,710 kHz (Other models)
Aerials
Dimensions
Approx. 520 × 253 × 256 mm (w/h/d)
FM: Telescopic aerial
AM: Built-in ferrite bar aerial
(20 1
Mass
Approx. 5.7 kg (12 lb. 9 oz) (incl. batteries)
Supplied accessory
⁄2
×10 ×10 1⁄8 inches) (incl. projecting parts)
Cassette-corder section
Recording system
4-track 2 channel stereo
Fast winding time
AC power cord (1)
Remote controller (1) (CFD-Z120/Z130 only)
Approx. 115 s (sec.) with Sony cassette C-60
Frequency response
Design and specifications are subject to change without
notice.
TYPE I (normal): 70 - 10,000 Hz
Optional accessories
Sony MDR headphones series
Additional Information 25
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A
I, J, K
Improving broadcast
reception 7
R
Audio emphasis 19
Recording on a tape 10
Repeat Play 14
ROTARY EQUALIZER 19
B
L
Batteries for player 17
Listening to the radio 6
Locating a specific track 13
S
Selecting tracks 5
Setting up 16
SURROUND 19
C
CD player 12
Choosing power sources 17
Cleaning
M, N, O
MEGA BASS 19
T
cabinet 23
lens 23
tape heads and tape path
23
Creating your own
program 15
Troubleshooting 22
P, Q
Playing
a CD 4
a tape 8
radio stations 6
tracks repeatedly 14
Power sources 17
Program Play 15
U, V, W, X, Y, Z
Using the display 12
D, E, F, G
Demagnetizing the tape
heads 24
Display 12
H
Headphones 18
Hooking up
power sources 17
speakers 16
26 Additional Information
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92
Download from Www.Somanuals.com. All Manuals Search And Download.
Sony Corporation Printed in China
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92
Download from Www.Somanuals.com. All Manuals Search And Download.
|