/&'ꢀ'LJLWDOꢀ&RORXUꢀ79
2SHUDWLQJꢀ,QVWUXFWLRQVꢀ
.'/ꢁꢂꢃ9ꢂꢄ[[
.'/ꢁꢅꢆ9ꢂꢄ[[
.'/ꢁꢅꢇ9ꢂꢄ[[
.'/ꢁꢈꢉ9ꢂꢄ[[
.'/ꢁꢈꢃ9ꢂꢄ[[
.'/ꢁꢂꢃ:ꢂꢄ[[
.'/ꢁꢅꢆ:ꢂꢄ[[
.'/ꢁꢅꢇ:ꢂꢄ[[
.'/ꢁꢈꢉ:ꢂꢄ[[
.'/ꢁꢈꢃ:ꢂꢄ[[
,QVWUXFWLRQVꢀDERXWꢀ³,QVWDOOLQJꢀ:DOOꢀ0RXQWꢀ%UDFNHW´ꢀDUHꢀLQFOXGHGꢀZLWKLQꢀ
WKLVꢀ79¶VꢀLQVWUXFWLRQVꢀPDQXDO
)RUꢀXVHIXOꢀLQIRUPDWLRQꢀDERXWꢀ6RQ\ꢀSURGXFWV
ꢀꢁꢂꢃꢃꢀꢄꢁꢅ
4-159-943-ꢀꢁ(1)
Printed in Spain
© 2009 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
4-159-943-ꢀꢁ(1)
Notes on Digital TV
function
NOTICE FOR
CUSTOMERS IN
THE UNITED
KINGDOM
• Any functions related to Digital TV
(
) will only work in countries or
areas where DVB-T (MPEG-2 and
H.264/MPEG-4 AVC) digital terrestrial
signals are broadcast or where you have
access to a compatible DVB-C (MPEG-
2 and H.264/MPEG-4 AVC) cable
service. Please confirm with your local
dealer if you can receive a DVB-T signal
where you live or ask your cable
provider if their DVB-C cable service is
suitable for integrated operation with this
TV.
A moulded plug complying with BS1363
is fitted to this equipment for your safety
and convenience.
Should the fuse in the plug supplied need
to be replaced, a 10 AMP fuse approved by
ASTA or BSI to BS 1362 (i.e., marked
• Your cable provider may charge a fee for
their services, or require you to agree to
its terms and conditions of business.
• This TV set complies with DVB-T and
DVB-C specifications, but compatibility
with future DVB-T digital terrestrial and
DVB-C digital cable broadcasts are not
guaranteed.
• Some Digital TV functions may not be
available in some countries/areas and
DVB-C cable may not operate correctly
with some providers.
with
or ) must be used.
When an alternative type of plug is used it
should be fitted with a 10 AMP FUSE
otherwise the circuit should be protected
by a 10 AMP FUSE at the distribution
board.
If the plug supplied with this equipment
has a detachable fuse cover, be sure to
attach the fuse cover after you change the
fuse. Never use the plug without the fuse
cover. If you should lose the fuse cover,
please contact your nearest Sony service
station.
For a list of compatible cable providers,
refer to the support web site:
DVBC/
~
• The illustrations used in this manual are
of the KDL-40V58xx unless otherwise
state.
• The "x" that appear on the model name,
correspond to numeric digits related to
colour variation.
FUSE
Trademark information
is a registered trademark of the DVB
Project.
HDMI, the HDMI logo and High-
Definition Multimedia Interface are
trademarks or registered trademarks of
HDMI Licensing LLC.
FUSE
DLNA and DLNA CERTIFIED are
trademarks and/or service marks of Digital
Living Network Alliance.
How to replace the fuse
Open the fuse compartment with a blade
screwdriver, and replace the fuse.
Please refer to the illustration that actually
equipped with the product.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.
Introduction
“BRAVIA” and
are
Thank you for choosing this Sony product.
Before operating the TV, please read this
manual thoroughly and retain it for future
reference.
trademarks of Sony Corporation.
“XMB™” and “XrossMediaBar” are
trademarks of Sony Corporation and Sony
Computer Entertainment Inc.
DiSEqC™ is a trademark of EUTELSAT.
The manufacturer of this product is
Sony Corporation, 1-7-1 Konan
Minato-ku Tokyo, 108-0075 Japan.
The Authorized Representative for
EMC and product safety is Sony
Deutschland GmbH, Hedelfinger
Strasse 61, 70327 Stuttgart,
FREESAT and the FREESAT logo are
registered trade marks of Freesat (UK) Ltd
and are used under licence.
FREESAT Logo (c) Freesat (UK) Ltd.
The Channel logos are trade marks and
copyright of their respective owners.
Germany. For any service or
guarantee matters please refer to
the addresses given in separate
service or guarantee documents.
GB
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Start-up Guide
4
Safety Information............................................................................................................................ 8
Precautions....................................................................................................................................... 9
Remote and TV Controls/Indicators ............................................................................................. 10
Watching TV
Watching TV.................................................................................................................................... 14
Instruction Manual
Instruction Manual ......................................................................................................................... 16
Navigating through the Instruction Manual ................................................................................ 16
Additional Information
Installing the Accessories (Wall-Mount Bracket) ........................................................................ 17
Specifications................................................................................................................................. 20
Troubleshooting............................................................................................................................. 23
GB
Before operating the TV, please read “Safety Information” (page 8). Retain this manual for future reference.
GB
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Start-up Guide
Before Use
1: Attaching the stand
1
Open the carton box and take out the stand
and the screws.
To check the accessories
Mains lead (Type C-6)* (1) (Except for 37/32
inches)
2
Place the TV set on the stand. Take care
not to interfere with cables.
Stand (1) and screws (4)
RM-ED020 Remote (1)
RM-ED018 Remote (1) (KDL-46/40/37/32W5820/
5830/5840 only)
Size AA batteries (R6 type) (2)
* Do not remove the ferrite cores.
To insert batteries into the remote
Push and lift the cover to open.
3
Fix the TV to the stand according to the
arrow marks that guide the screw holes
using the supplied screws.
~
• If using an electric screwdriver, set the tightening
torque at approximately 1.5 N·m (15 kgf·cm).
GB
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a Set Top Box/recorder (e.g.
DVD recorder) with HDMI
2: Connecting an aerial/Set
Top Box/recorder (e.g. DVD
recorder)
Connecting a Set Top Box/recorder (e.g.
DVD recorder) with SCART
Set Top Box/recorder (e.g. DVD recorder)
3: Preventing the TV from
toppling over
Set Top Box/recorder (e.g. DVD recorder)
• Screw the satellite connector softly with hand, do
not use any tool.
• TV must be switched off when connecting satellite
antenna.
GB
5
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
3
Install a wood screw (4 mm in diameter,
not supplied) in the TV stand.
3
Install a machine screw (M4 × 20, not
supplied) into the screw hole of the TV.
Tie the wood screw and the machine
screw with a strong cord.
Follow the instructions on the screen.
4: Bundling the cables
Satellite Auto Tuning: Confirm that the
tuning settings are the same that your
satellite settings.
Digital Auto Tuning: When you select
“Cable”, we recommend that you select
“Quick Scan” for quick tuning. Set
“Frequency” and “Network ID” according
to the information supplied from your
cable provider. If no channel is found
using “Quick Scan”, try “Full Scan”
(though it may take some time).
For a list of compatible cable providers,
refer to the support web site:
DVBC/
~
• You can also tune channels manually.
Programme Sorting: If you want to
change the order of analogue channels,
follow the steps in “Programme Sorting”.
~
• Do not bundle the mains lead/AC power cord
together with other cables.
Eco Preset: When you select “Yes”, the
“Eco” settings are changed into
recommended values to reduce power
consumption.
5: Performing the initial
Set-up
1 Connect the TV to your mains socket.
2 Press 1 on the TV.
When you switch on the TV for the first
time, the Language menu appears on the
screen.
GB
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the viewing angle
of the TV
This TV can be adjusted within the angles
shown below.
Adjust the angle left and right (swivel)
Top view
Front
Detaching the Table-Top
Stand from the TV
~
• Remove the screws guided by the arrow marks
of the TV.
• Do not remove the Table-Top Stand for any
reason other than to wall-mount the TV.
GB
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Installed on the wall
Notes
• Do not use the supplied mains lead on
any other equipment.
30 cm
Safety
Information
• Do not pinch, bend, or twist the mains
lead excessively. The core conductors
may be exposed or broken.
10 cm
10 cm
• Do not modify the mains lead.
• Do not put anything heavy on the mains
lead.
• Do not pull on the mains lead itself when
disconnecting the mains lead.
• Do not connect too many appliances to
the same mains socket.
Installation/Set-up
Install and use the TV set in accordance
with the instructions below in order to
avoid any risk of fire, electrical shock or
damage and/or injuries.
10 cm
Leave at least this space around
the set.
Installation
• The TV set should be installed near an
easily accessible mains socket.
• Place the TV set on a stable, level
surface.
• Only qualified service personnel should
carry out wall installations.
• Do not use a poor fitting mains socket.
Installed with stand
30 cm
Prohibited Usage
Do not install/use the TV set in locations,
environments or situations such as those
listed below, or the TV set may
10 cm
10 cm
6 cm
• For safety reasons, it is strongly
recommended that you use Sony
accessories, including:
malfunction and cause a fire, electrical
shock, damage and/or injuries.
Leave at least this space around
the set.
Location:
–
Wall-mount bracket SU-WL500
Outdoors (in direct sunlight), at the
seashore, on a ship or other vessel, inside a
vehicle, in medical institutions, unstable
locations, near water, rain, moisture or
smoke.
• Be sure to use the screws supplied with
the Wall-mount bracket when attaching
the mounting hooks to the TV set. The
supplied screws are designed so that they
are 8 mm to 12 mm in length when
measured from the attaching surface of
the mounting hook.
The diameter and length of the screws
differ depending on the Wall-mount
bracket model.
• To ensure proper ventilation and prevent
the collection of dirt or dust:
–
Do not lay the TV set flat, install
upside down, backwards, or
sideways.
–
–
Do not place the TV set on a shelf,
rug, bed or in a closet.
Do not cover the TV set with a cloth,
such as curtains, or items such as
newspapers, etc.
Environment:
• To prevent the spread of fire,
keep candles or other open
flames away from this product
Use of screws other than those supplied
may result in internal damage to the TV
set or cause it to fall, etc.
at all time.
• Places that are hot, humid, or excessively
dusty; where insects may enter; where it
might be exposed to mechanical
vibration, near flammable objects
(candles, etc). The TV set shall not be
exposed to dripping or splashing and no
objects filled with liquids, such as vases,
shall be placed on the TV.
–
Do not install the TV set as shown
below.
8 mm - 12 mm
Air circulation is blocked.
Screw (supplied with the
Wall-mount bracket)
Mounting Hook
Situation:
Hook attachment on rear
of TV set
Wall
Wall
Do not use when your hands are wet, with
the cabinet removed, or with attachments
not recommended by the manufacturer.
Disconnect the TV set from mains socket
and aerial during lightning storms.
Transporting
• Before
transporting the
TVset, disconnect
all cables.
• Two or three
people are needed
to transport a large
TV set.
Broken pieces:
• Do not throw anything at the TV set. The
screen glass may break by the impact and
cause serious injury.
• If the surface of the TV set cracks, do not
touch it until you have unplugged the
mains lead. Otherwise electric shock
may result.
Mains lead
Handle the mains lead and socket as
follows in order to avoid any risk of fire,
electrical shock or damage and/or injuries:
• When
–
–
–
–
Use only mains leads supplied by
Sony, not other suppliers.
Insert the plug fully into the mains
socket.
Operate the TV set on a 220–240 V AC
supply only.
When wiring cables, be sure to unplug
the mains lead for your safety and take
care not to catch your feet on the
cables.
Disconnect the mains lead from the
mains socket before working on or
moving the TV set.
transporting the
TV set by hand,
hold it as shown
on the right. Do
not put stress on
the LCD panel.
• When lifting or
moving the TV
set, hold it firmly
from the bottom.
When not in use
• If you will not be using the TV set for
several days, the TV set should be
disconnected from the mains for
environmental and safety reasons.
• As the TV set is not disconnected from
the mains when the TV set is just turned
off, pull the plug from the mains to
disconnect the TV set completely.
• However, some TV sets may have
features that require the TV set to be left
in standby to work correctly.
• When transporting the TV set, do not
subject it to jolts or excessive vibration.
• When transporting the TV set for repairs
or when moving, pack it using the
–
original carton and packing material.
–
–
Keep the mains lead away from heat
sources.
Ventilation
Unplug the mains plug and clean it
regularly. If the plug is covered with
dust and it picks up moisture, its
insulation may deteriorate, which
could result in a fire.
• Never cover the ventilation holes or
insert anything in the cabinet.
• Leave space around the TV set as shown
below.
• It is strongly recommended that you use
a Sony wall-mount bracket in order to
provide adequate air-circulation.
For children
• Do not allow children to climb on the TV
set.
• Keep small accessories out of the reach
of children, so that they are not
mistakenly swallowed.
GB
8
Download from Www.Somanuals.com. All Manuals Search And Download.
contact with rubber or vinyl materials
may result in damage to the screen
surface and cabinet material.
• Periodic vacuuming of the ventilation
openings is recommended to ensure to
proper ventilation.
• When adjusting the angle of the TV set,
move it slowly so as to prevent the TV
set from moving or slipping off from its
table stand.
Disposal of
waste batteries
(applicable in the
European Union
and other
If the following problems
occur...
Turn off the TV set and unplug the mains
lead immediately if any of the following
problems occur.
Ask your dealer or Sony service centre to
have it checked by qualified service
personnel.
European
countries with separate
collection systems)
Optional Equipment
When:
This symbol on the battery or on the
packaging indicates that the battery
provided with this product shall not be
treated as household waste. On certain
batteries this symbol might be used in
combination with a chemical symbol. The
chemical symbols for mercury (Hg) or lead
(Pb) are added if the battery contains more
than 0.0005% mercury or 0.004% lead. By
ensuring these batteries are disposed of
correctly, you will help prevent potentially
negative consequences for the
• Keep optional components or any
equipment emitting electromagnetic
radiation away from the TV set.
Otherwise picture distortion and/or noisy
sound may occur.
• This product has been tested and found
to compliant with the limits set out in the
EMC Directive for using connection
cables not longer than 3 meters (9.8 feet).
–
–
–
Mains lead is damaged.
Poor fitting of mains socket.
TV set is damaged by being dropped,
hit or having something thrown at it.
Any liquid or solid object falls through
openings in the cabinet.
–
Batteries
• Observe the correct polarity when
inserting batteries.
• Do not use different types of batteries
together or mix old and new batteries.
• Dispose of batteries in an
environmentally friendly way. Certain
regions may regulate the disposal of
batteries. Please consult your local
authority.
• Handle the remote with care. Do not
drop or step on it, or spill liquid of any
kind onto it.
• Do not place the remote in a location
near a heat source, a place subject to
direct sunlight, or a damp room.
Precautions
Viewing the TV
• View the TV in moderate light, as
viewing the TV in poor light or during
long period of time, strains your eyes.
• When using headphones, adjust the
volume so as to avoid excessive levels,
as hearing damage may result.
environment and human health which
could otherwise be caused by
inappropriate waste handling of the
battery. The recycling of the materials will
help to conserve natural resources. In case
of products that for safety, performance or
data integrity reasons require a permanent
connection with an incorporated battery,
this battery should be replaced by qualified
service staff only. To ensure that the
battery will be treated properly, hand over
the product at end-of-life to the applicable
collection point for the recycling of
electrical and electronic equipment. For all
other batteries, please view the section on
how to remove the battery from the product
safely. Hand the battery over to the
applicable collection point for the
LCD Screen
• Although the LCD screen is made with
high-precision technology and 99.99%
or more of the pixels are effective, black
dots may appear or bright points of light
(red, blue, or green) may appear
constantly on the LCD screen. This is a
structural property of the LCD screen
and is not a malfunction.
• Do not push or scratch the front filter, or
place objects on top of this TV set. The
image may be uneven or the LCD screen
may be damaged.
• If this TV set is used in a cold place, a
smear may occur in the picture or the
picture may become dark. This does not
indicate a failure. These phenomena
disappear as the temperature rises.
• Ghosting may occur when still pictures
are displayed continuously. It may
disappear after a few moments.
• The screen and cabinet get warm when
this TV set is in use. This is not a
malfunction.
• The LCD screen contains a small amount
of liquid crystal. Some fluorescent tubes
used in this TV set also contain mercury.
Follow your local ordinances and
regulations for disposal.
Disposal of the TV set
Disposal of Old
Electrical &
Electronic
Equipment
(Applicable in
recycling of waste batteries. For more
detailed information about recycling of
this product or battery, please contact your
local Civic Office, your household waste
disposal service or the shop where you
purchased the product.
the European
Union and other European
countries with separate
collection systems)
This symbol on the product or on its
packaging indicates that this product shall
not be treated as household waste. Instead
it shall be handed over to the applicable
collection point for the recycling of
electrical and electronic equipment. By
ensuring this product is disposed of
correctly, you will help prevent potential
negative consequences for the
Handling and cleaning the
screen surface/cabinet of
the TV set
environment and human health, which
could otherwise be caused by
inappropriate waste handling of this
product. The recycling of materials will
help to conserve natural resources. For
more detailed information about recycling
of this product, please contact your local
Civic Office, your household waste
disposal service or the shop where you
purchased the product.
Be sure to unplug the mains lead connected
to the TV set from mains socket before
cleaning.
To avoid material degradation or screen
coating degradation, observe the following
precautions.
• To remove dust from the screen surface/
cabinet, wipe gently with a soft cloth. If
dust is persistent, wipe with a soft cloth
slightly moistened with a diluted mild
detergent solution.
• Never use any type of abrasive pad,
alkaline/acid cleaner, scouring powder,
or volatile solvent, such as alcohol,
benzene, thinner or insecticide. Using
such materials or maintaining prolonged
GB
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote and TV Controls/Indicators
Remote and TV controls
In case of KDL-46/40/37/32W5820/5830/5840, please refer to the separate leaflet.
Buttons on the TV will work the same as those on the remote.
* In the TV menu, these buttons will work as F/f/G/g/
z
.
• The number 5, N, PROG + and AUDIO buttons on the remote
have a tactile dot. Use the tactile dots as a reference when operating
the TV.
Button/Switch
Description
1 "/1 (TV
Press to turn the TV on and off from standby
mode.
standby)
2 1 (Power)
Press to turn the TV on or off.
~
• To turn the TV completely off (0 W, no
power consumption), turn off the TV, then
unplug the mains lead/AC power cord from
the mains/AC power.
3
EXIT
Exit from the current application and go back
to normal TV mode.
4 AD
Press to set Audio Description to "On" or
"Off".
5
/
(Info/
Each time you press the button, the display
Text reveal) changes as follows:
In digital mode: Details of the current
programme t Details of the next programme
(only for Sony Guide)
In analogue mode: Current channel number
and screen mode t Clock information
In Text mode: Reveals hidden information
(e.g. answers to a quiz) (page 15).
GB
10
Download from Www.Somanuals.com. All Manuals Search And Download.
6 F/f/G/g/
Press F/f/G/g to move the on-screen cursor.
Press to select/confirm the highlighted item.
When playing a photo file: Press to pause/
start a slideshow. Press F/G to select the
previous file. Press f/g to select the next file.
When playing a music/video file: Press
to
pause/start the playback. Press and hold G/g to
fast forward/fast reverse, then release the button
at the point where you want to resume playback.
Press F to start playback from the beginning of
the current file. Press f to go to the next file.
7 OPTIONS
Press to display a list that contains “Device
Control” or shortcuts to some setting menus.
Use the “Device Control” menu to operate
equipment that is compatible with Control for
HDMI.
The listed options vary depending on the input
source.
8 HOME
Press to display the TV Home Menu.
9 Coloured
When the coloured buttons are available, an
operation guide appears on the screen.
buttons
q; Number
In TV mode: Press to select channels. For
channel numbers 10 and above, press the next
digit quickly.
buttons
~
• Use alphanumeric buttons when needed.
In Text mode: Press to enter a page number.
qa
(Favourite) Press to display the Favourite List that you have
specified.
qs PROG +/–/
In TV mode: Press to select the next (+) or
previous (–) channel.
/
In Text mode: Press to select the next ( ) or
previous ( ) page.
qd
(Subtitle
setting)
Press to change the subtitle language (in digital
mode only).
qf % (Mute)
Press to mute the sound. Press again to restore
the sound.
z
• In standby mode, if you want to turn on the
TV without sound, press this button.
qg 2 +/–
Press to adjust the volume.
(Volume)
qh / (Text)
Press to display text information.
qj RETURN/
Press to return to the previous screen of the
displayed menu.
BACK
When playing a photo/music/video file: Press to
stop the playback. (The display returns to the
file or folder list.)
qk
GUIDE
(EPG)
Press to display the Digital Electronic
Programme Guide (EPG).
GB
(Continued)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
ql DIGITAL
Switches from analogue mode to the last
selected digital mode (DVB-S or Antenna/
Cable). Toggles between two digital modes
(DVB-S and Digital (Antenna/Cable)) when
the TV set operates in Digital mode.
When viewing pictures from connected
equipment: Press to return to normal TV mode.
w; ANALOG
Press to display the analogue channel that was
last viewed.
When viewing pictures from connected
equipment: Press to return to normal TV mode.
wa BRAVIA
m/N/X/M/x: You can operate the
BRAVIA Sync-compatible equipment that is
connected to the TV.
Sync
SYNC MENU: Displays the menu of
connected HDMI equipment. While viewing
other input screens or TV programmes,
“HDMI Device Selection” is displayed when
the button is pressed.
THEATRE: You can set Theatre Mode to on
or off. When Theatre Mode is set to on, the
optimum sound quality (if the TV is connected
with an audio system using an HDMI cable)
and picture quality for film-based contents are
automatically set.
~
• If you turn the TV off, Theatre Mode is also
turned off.
• When you change the “Scene Select” setting,
Theatre Mode turns off automatically.
• “Control for HDMI” (BRAVIA Sync) is only
available with the connected Sony equipment
that has the BRAVIA Sync or BRAVIA
Theatre Sync logo or is compatible with
Control for HDMI.
ws
wd
/
(Input In TV mode: Press to display a list of inputs.
select/Text
hold)
In Text mode: Press to hold the current page.
(Screen
mode)
Press to change the screen format (page 15).
GB
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Indicators
Indicator
Description
1 Light sensor
Do not put anything over the sensor, doing so may affect its function.
2 Remote control
Receives signals from the remote.
Do not put anything over the sensor. The sensor may not work properly.
sensor
3
(Picture Off / Lights up in green when you select “Picture Off”.
Timer)
Lights up in orange when you set the timer.
Lights up in red when the TV is in standby mode.
Lights up in green when the TV is on.
4 1 (Standby)
5 " (Power)
About the operation guide on the TV screen
Operation Guide
Example: Press
or RETURN/ BACK (see 6 (page 11) or qj (page 11)).
The operation guide provides help on how to operate the TV using the remote, and is displayed at
the bottom of the screen. Use the remote buttons shown on the operation guide.
GB
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
To select a digital programme using the
Digital Electronic Programme Guide
(EPG).
Watching TV
In digital mode
An information banner appears briefly.
The following icons may be indicated on
the banner.
: Interactive service is available
(MHEG Digital Text)
: Interactive service (MHEG Digital
Text) is currently disabled
: Radio service
: Scrambled/Subscription service
:
Multiple audio languages available
: Subtitles available
: Subtitles available for the hearing
impaired
2
: Recommended minimum age for
current programme (ages from 4 to
18)
: Parental lock
To access Digital Text
Many broadcasters provide a Digital Text
service. Digital Text offers graphically rich
contents, compared to Analogue Text.
Select a digital channel which provides Digital
Text, then press /.
When a broadcaster provides a dedicated
Digital Text channel, select this channel to
access Digital Text.
3
3
To navigate through Digital Text, follow the
instructions on the screen.
To exit Digital Text, press RETURN/ BACK.
To move around, press F/f/G/g.
To select items, press and the number
buttons.
1
2
Press 1 on the TV to turn on the TV.
When the TV is in standby mode (the 1
(standby) indicator on the TV front panel
is red), press "/1 on the remote to turn on
the TV.
To access shortcuts, press the coloured
buttons.
Press DIGITAL to switch to digital or
satellite mode, or press ANALOG to
switch to analogue mode.
The available channels vary depending on
the mode.
3
Press the number buttons or PROG +/– to
select a TV channel.
GB
14
Download from Www.Somanuals.com. All Manuals Search And Download.
To access Analogue Text
14:9*
In analogue mode, press /. Each time you
press /, the display changes cyclically as
follows:
Text and TV picture t Text t No Text (exit
the Text service)
Displays the 14:9
picture in the correct
proportion. As a result,
side bars are shown on
the screen.
To select a page, press the number buttons or
* Parts of the top and bottom of the picture may be cut off.
You can adjust the vertical position of the picture. Press
F/f to move the picture up or down (e.g. to read
subtitles).
/
.
To hold a page, press
To reveal hidden information, press
.
.
z
~
• You can also jump directly to a page by selecting
the page number displayed on the screen. Press
and F/f/G/g to select the page number, then press
.
• When four coloured items appear at the bottom of
the Text page, you can access pages quickly and
easily (FasText). Press the corresponding coloured
button to access the page.
• When you select “Smart”, some characters and/or
letters at the top and the bottom of the picture may
not be visible. In such a case, adjust “Vertical
Size” in the “Screen” menu.
z
• When “Auto Format” is set to “On”, the TV
automatically selects the best mode to suit the
broadcast.
• If 720p, 1080i or 1080p source pictures are
displayed with black borders on the screen edges,
select “Smart” or “Zoom” to adjust the pictures.
To change the Screen Format manually
Press
repeatedly to select the desired
Screen Format.
SCENE
When you select the desired scene option, the
optimum sound quality and picture quality for the
selected scene are automatically set.
Press F/f/G/g to select the scene option, then press
.
Cinema: Delivers picture scenes just like those in a
theatre-like atmosphere with dynamic sound.
Photo: Delivers picture scenes that authentically
reproduces the texture and colour of a printed
photo.
Smart*
Enlarges the centre
portion of the picture.
The left and right edges
of the picture are
stretched to fill the 16:9
screen.
4:3
Sports: Delivers picture scenes that let you
experience realistic picture and sound like those in a
stadium.
Music: Delivers sound effects that let you
experience dynamic and clear sound like that at a
concert.
Displays the 4:3 picture
in its original size. Side
bars are shown to fill
the 16:9 screen.
Wide
Game: Delivers picture scenes that let you enjoy
your game-playing experience to the fullest with
superb picture and sound quality.
Graphics: Delivers picture scenes that ease your
prolonged monitor viewing experience and reduce
fatigue by displaying clearer detailed pictures.
General: Current user settings.
Auto: The optimum sound quality and picture
quality are automatically set according to the input
source, though there may not be any effect
depending on the connected devices.
Stretches the 4:3
picture horizontally, to
fill the 16:9 screen.
Zoom*
Displays the
cinemascopic (letter
box format) picture in
the correct proportion.
~
• In Digital mode, "Scene" options are applied
independently for HD (High-definition) and SD
(Standard-definition) pictures.
• When you set Theatre Mode (page 12) to on, the
“Scene Select” setting switches to “Cinema”
automatically.
GB
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruction Manual
Instruction Manual
Displays the instruccion manual on the screen.
Navigating through the Instruction Manual
1
Press HOME to display the XMB™.
Media Category Bar
Category Object Bar
2
3
4
Press G/g to select Settings.
Press F/f to select Instruction Manual, then press
.
Press F/f to select topic from the Table of Contents, then press
Use the corresponding coloured button to go to next or previous page and to return to Table of
Contents.
.
If the explanation is linked to other topic, the symbol will appear. Press F/f/G/g to select
then press . Press RETURN/BACK to go back.
5
Press HOME to exit.
~
• The XMB™ (XrossMediaBar) is a menu of BRAVIA features and input sources displayed on the TV screen.
GB
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Installing the Accessories (Wall-Mount Bracket)
To Customers:
For product protection and safety reasons, Sony strongly recommends that installing of your TV be
performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.
To Sony Dealers and Contractors:
Provide full attention to safety during the installation, periodic maintenance and examination of this
product.
Your TV can be installed using the SU-WL500 Wall-Mount Bracket (sold separately).
•
Refer to the Instructions supplied with the Wall-Mount Bracket to properly carry out the
installation.
•
•
•
Refer to “Detaching the Table-Top Stand from the TV” (page 7).
Refer to “TV installation dimensions table” (page 18).
Refer to “Screw and Hook locations diagram/table” (page 19).
~
• Place the TV on the Table-Top Stand, when securing the Mounting Hook.
Screw
(+PSW
6 × 16)
Square hole
Mounting Hook
Sufficient expertise is required for installing this product, especially to determine the strength of
the wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to
the wall to Sony dealers or licensed contractors and pay adequate attention to safety during the
installation. Sony is not liable for any damage or injury caused by mishandling or improper
installation.
GB
17
Download from Www.Somanuals.com. All Manuals Search And Download.
TV installation dimensions table
Screen centre point
Unit: cm
Screen
centre
dimension
Length for each mounting angle
Display
dimensions
Model Name
Angle (0q)
Angle (20q)
A
B
C
D
E
F
G
H
126.2
126.2
112.3
112.3
98.7
98.7
91.7
91.7
79.8
79.8
82.2
82.3
72.3
72.5
63.6
63.8
60.0
60.2
53.6
53.7
3.9
47.8
47.8
47.1
47.1
46.3
46.3
46.3
46.3
46.3
46.3
16.9
16.9
15.0
15.0
14.7
14.7
14.5
14.5
14.3
14.3
40.7
40.9
35.8
35.9
32.8
33.0
31.4
31.6
29.1
29.2
77.8
77.8
68.5
68.6
60.4
60.4
57.0
57.0
51.1
51.1
51.5
51.5
50.2
50.3
49.3
49.3
49.3
49.3
49.2
49.2
KDL-52V58xx
3.9
KDL-52W58xx
KDL-46V58xx
KDL-46W58xx
KDL-40V58xx
KDL-40W58xx
KDL-37V58xx
KDL-37W58xx
KDL-32V58xx
KDL-32W58xx
8.4
8.4
12.2
12.2
14.0
14.0
17.2
17.2
Figures in the above table may differ slightly depending on the installation.
WARNING
The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of
the TV. Refer to “Specifications” (page 20) for its weight.
GB
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Screw and Hook locations diagram/table
Model Name
KDL-52V58xx
Screw location
Hook location
d, g
d, g
d, g
d, g
d, g
d, g
d, g
d, g
e, g
e, g
b
b
b
b
b
b
b
b
c
c
KDL-52W58xx
KDL-46V58xx
KDL-46W58xx
KDL-40V58xx
KDL-40W58xx
KDL-37V58xx
KDL-37W58xx
KDL-32V58xx
KDL-32W58xx
Screw location
Hook location
When installing the Mounting Hook on the TV.
When installing the TV onto the Base Bracket.
a
b
c
GB
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
System
LCD (Liquid Crystal Display) Panel
Panel system
TV system
Analogue: Depending on your country/area selection: B/G/H, D/K, L, I
Digital: DVB-T/DVB-C
Satellite: DVB-S/DVB-S2
Analogue: PAL, PAL60 (only video input), SECAM, NTSC3.58, NTSC4.43 (only video input)
Digital: MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC MP/HP@L4
Colour/video system
Channel coverage
Analogue: VHF: E2–E12/UHF: E21–E69/CATV: S1–S20/HYPER: S21–S41
D/K: R1–R12, R21–R69/L: F2–F10, B–Q, F21–F69/I: UHF B21–B69
Digital: VHF/UHF
Satellite: IF Frequency 950-2150 MHz
10 W + 10 W
Sound output
Input/Output jacks
Aerial/Antenna cable
Satellite antenna
75 ohm external terminal for VHF/UHF
Female F-Type Connector IEC169-24, 75 ohm.
DiSEqC 1.0, LNB 13V/18V & 22KHz tone
21-pin scart connector (CENELEC standard) including audio/video input, RGB input and TV audio/video
output.
/
/
AV1
/
21-pin scart connector (CENELEC standard) including audio/video input, RGB input and selectable audio/
video output.
AV2
Supported formats: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3V negative sync/PB/CB: 0.7 Vp-p, 75 ohms/
PR/CR: 0.7 Vp-p, 75 ohms
COMPONENT IN
Audio input (phono jacks)
COMPONENT IN
HDMI IN1, 2, 3, 4
Video: 1080/24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Audio: Two channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital
Analogue audio input (minijack) (HDMI IN1 only)
PC Input (page 22)
Video input (phono jack)
AV3
AV3
Audio input (phono jacks)
Digital optical jack (Two channel linear PCM, Dolby Digital)
DIGITAL AUDIO
OUT (OPTICAL)
Audio output (phono jacks)
PC Input (D-sub 15-pin) (page 22)
PC IN
G: 0.7 Vp-p, 75 ohms, non Sync on Green/B: 0.7 Vp-p, 75 ohms/
R: 0.7 Vp-p, 75 ohms/HD: 1-5 Vp-p/VD: 1-5 Vp-p
PC audio input (minijack)
USB port
Headphones jack
i
CAM (Conditional Access Module) slot
10BASE-T/100BASE-TX connector (Depending on the operating environment of the network, connection
speed may differ. 10BASE-T/100BASE-TX communication rate and communication quality are not
guaranteed for this TV.)
LAN
GB
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Model name
KDL-
KDL-
KDL-
KDL-
KDL-
52V58xx,
52W58xx
46V58xx,
46W58xx
40V58xx,
40W58xx
37V58xx,
37W58xx
32V58xx,
32W58xx
Power and others
220 V – 240 V AC, 50 Hz
52 inches / Approx. 46 inches / Approx. 40 inches / Approx. 37 inches / Approx. 32 inches / Approx.
Power requirements
Screen size (measured
diagonally)
132 cm
117 cm
102 cm
94 cm
81 cm
1,920 dots (horizontal) × 1,080 lines (vertical)
Display resolution
156 W (KDL-
52V58xx)
164 W (KDL-
52W58xx)
123 W (KDL-
46V58xx)
142 W (KDL-
46W58xx)
111 W (KDL-
40V58xx)
110 W (KDL-
40W58xx)
112 W (KDL-
37V58xx)
117 W (KDL-
37W58xx)
77 W (KDL-
32V58xx)
71 W (KDL-
32W58xx)
Power
in “Home”/
consumption “Standard”
mode
254 W (KDL-
52V58xx)
261 W (KDL-
52W58xx)
203 W (KDL-
46V58xx)
221 W (KDL-
46W58xx)
177 W (KDL-
40V58xx)
172 W (KDL-
40W58xx)
169 W (KDL-
37V58xx)
179 W (KDL-
37W58xx)
109 W (KDL-
32V58xx)
99 W (KDL-
32W58xx)
in “Shop”/
“Vivid”
mode
0.17 W (17 W when “Quick Start” is set to “On”)
Standby power
consumption*1
228 kWh (KDL-
52V58xx)
239 kWh (KDL-
52W58xx)
179 kWh (KDL-
46V58xx)
207 kWh (KDL-
46W58xx)
162 kWh (KDL-
40V58xx)
161 kWh (KDL-
40W58xx)
163 kWh (KDL-
37V58xx)
171 kWh (KDL-
37W58xx)
112 kWh (KDL-
32V58xx)
103 kWh (KDL-
32W58xx)
Average anual energy
consumption*2
See “To check the accessories” (page 4).
SU-WL500
Supplied accessories
Optional
Wall-Mount
accessories Bracket
Model
name
KDL-
52V58xx,
52W58xx
KDL-
46V58xx,
46W58xx
KDL-
40V58xx,
40W58xx
KDL-
37V58xx,
37W58xx
KDL-
32V58xx,
32W58xx
Dimensions (Approx.) (w × h × d)
126.2 x 86.9 x 35.8 cm 112.3 x 77.1 x 33.0 cm 98.7 x 68.4 x 30.3 cm
(KDL-52V58xx) (KDL-46V58xx) (KDL-40V58xx)
126.2 x 87.1 x 35.8 cm 112.3 x 77.2 x 33.0 cm 98.7 x 68.6 x 30.3 cm
91.7 x 64.8 x 30.3 cm
(KDL-37V58xx)
91.7 x 64.9 x 30.3 cm
(KDL-37W58xx)
79.8 x 58.4 x 25.9 cm
(KDL-32V58xx)
79.8 x 58.5 x 25.9 cm
(KDL-32W58xx)
with
Table-
Top
(KDL-52W58xx)
(KDL-46W58xx)
(KDL-40W58xx)
Stand
126.2 x 82.2 x 11.5 cm 112.3 x 72.3 x 9.6 cm
(KDL-52V58xx) (KDL-46V58xx)
126.2 x 82.3 x 11.5 cm 112.3 x 72.5 x 9.6 cm
98.7 x 63.6 x 9.3 cm
(KDL-40V58xx)
98.7 x 63.8 x 9.3 cm
(KDL-40W58xx)
91.7 x 60.0 x 9.1 cm
(KDL-37V58xx)
91.7 x 60.2 x 9.1 cm
(KDL-37W58xx)
79.8 x 53.6 x 8.9 cm
(KDL-32V58xx)
79.8 x 53.7 x 8.9 cm
(KDL-32W58xx)
without
Table-
Top
(KDL-52W58xx)
(KDL-46W58xx)
Stand
Mass (Approx.)
35.0 kg (KDL-
52V58xx)
35.5 kg (KDL-
52W58xx)
27.0 kg (KDL-
46V58xx)
27.5 kg (KDL-
46W58xx)
20.5 kg (KDL-
40V58xx)
21.0 kg (KDL-
40W58xx)
18.0 kg (KDL-
37V58xx)
18.5 kg (KDL-
37W58xx)
14.5 kg (KDL-
32V58xx)
15.0 kg (KDL-
32W58xx)
with
Table-
Top
Stand
30.5 kg (KDL-
52V58xx)
31.0 kg (KDL-
52W58xx)
23.5 kg (KDL-
46V58xx)
24.0 kg (KDL-
46W58xx)
17.5 kg (KDL-
40V58xx)
18.0 kg (KDL-
40W58xx)
15.0 kg (KDL-
37V58xx)
15.5 kg (KDL-
37W58xx)
12.0 kg (KDL-
32V58xx)
12.5 kg (KDL-
32W58xx)
without
Table-
Top
Stand
1
*
*
Specified standby power is reached after the TV finishes necessary internal processes.
4 hours a day and 365 days a year.
2
Design and specifications are subject to change without notice.
GB
21
Download from Www.Somanuals.com. All Manuals Search And Download.
PC input signal reference chart for
PC and HDMI IN 1, 2, 3, 4
Resolution
Horizontal
frequency (kHz) frequency (Hz)
Vertical
Standard
VESA
Signals
Horizontal
(Pixel)
640
×
Vertical
(Line)
VGA
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
480
31.5
37.5
31.5
37.9
46.9
48.4
56.5
60.0
45.0
47.4
47.8
60.0
47.7
64.0
66.6
67.5
60
75
70
60
75
60
70
75
60
60
60
60
60
60
60
60
640
720
480
400
600
600
768
768
768
720
768
768
960
768
1024
1080
1080
VESA
VESA
VESA
VESA
VESA
VESA
VESA
EIA
SVGA
XGA
800
800
1024
1024
1024
1280
1280
1280
1280
1360
1280
1920
1920
WXGA
VESA
VESA
VESA
VESA
VESA
VESA*
EIA*
SXGA
HDTV
* 1080p timing when applied to the HDMI input will be treated as a video timing and not a PC timing. This
affects the “Video Settings” menu and “Screen” menu settings.
To view PC contents, set “Screen Format” to “Wide” and “Display Area” to “Full Pixel”.
~
• This TV’s PC input does not support Sync on Green or Composite Sync.
• This TV’s PC input does not support interlaced signals.
• For the best picture quality, it is recommended to use the signals in the above chart with a 60 Hz vertical
frequency (boldfaced).
GB
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Check whether the 1 (standby) indicator is flashing in red.
When the 1 (standby) indicator is flashing
The self-diagnosis function is activated.
1
Count how many times the 1 (standby) indicator flashes between each two second break.
For example, the indicator may flash three times, go off for two seconds, then flash again three
times.
2
Press 1 on the TV to turn it off, disconnect the mains lead, and inform your dealer or Sony
service centre of how the indicator flashes (number of flashes).
When the 1 (standby) indicator is not flashing
1
2
Check the items in the tables below.
If the problem persists, have your TV serviced by qualified service personnel.
Condition
Explanation/Solution
Picture
There is no picture (screen is • Check the aerial/antenna/cable connection.
dark) and no sound.
• Connect the TV to the mains/AC power, and press 1 on the TV.
• If the 1 (standby) indicator lights up in red, press "/1.
No picture or menu
• Press to display the list of inputs, then select the desired input.
information from equipment • Check the connection between the optional equipment and the TV.
connected to the scart
connector appears on the
screen.
Ghosting occurs, or double
images appear.
• Check the aerial/antenna/cable connection.
• Check the aerial/antenna location and direction.
Only snow and noise appear • Check if the aerial/antenna is broken or bent.
on the screen. • Check if the aerial/antenna has reached the end of its serviceable life
(three to five years for normal use, one to two years when used at the
seaside).
There is picture or sound noise • Adjust “AFT” (Automatic Fine Tuning) to obtain better picture
when viewing a TV channel.
reception.
Tiny black points and/or
bright points appear on the
screen.
• The screen is composed of pixels. Tiny black points and/or bright points
(pixels) on the screen do not indicate a malfunction.
The picture contours are
distorted.
• Select “Standard” or “Off” in “Motionflow” (except for KDL-52V58xx,
46V58xx, 40V58xx, 37V58xx, 32V58xx).
• Change the current setting of “Film Mode” to other settings.
The picture is not displayed in • Select “Reset”.
colour.
The picture from equipment • Check the connection of the
COMPONENT IN sockets and check if
connected to the
the sockets are firmly seated in their respective sockets.
COMPONENT IN
sockets is not displayed in
colour, or is displayed in
irregular colours.
GB
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Condition
Explanation/Solution
No picture from the connected • Turn the connected equipment on.
equipment appears on the
screen.
• Check the cable connection.
• Press
to display the list of inputs, then select the desired input.
• Correctly insert the memory card or other storage device in the digital
still camera.
• Use a digital still camera memory card or other storage device that has
been formatted according to the instruction manual supplied with the
digital still camera.
• Operations are not guaranteed for all USB devices. Also, operations
differ depending on the features of the USB device and the video being
played.
You cannot select the
• Check the cable connection.
connected equipment on the • Set the server to be displayed on the Home Menu.
Home Menu or you cannot
switch the input.
Sound
The picture is good, but there • Press 2 +/– or % (Mute).
is no sound. • Check if the “Speaker” is set to “TV Speaker”.
• When using HDMI input with Super Audio CD or DVD-Audio,
DIGITAL AUDIO OUT (OPTICAL) may not output audio signals.
Channels
You cannot select your
desired channel.
• Switch between digital and analogue mode, and select the desired
digital/analogue channel.
Some channels are blank.
• The channel is for scrambled/subscription service only. Subscribe to a
pay TV service.
• The channel is used only for data (no picture or sound).
• Contact the broadcaster for transmission details.
You cannot view digital
channels.
• Contact a local installer to find out if digital transmissions are provided
in your area.
• Upgrade to a higher gain aerial/antenna.
Home Network
Connection diagnostic results
indicate a failure.
Check Connections
• Use a straight cable for the LAN cable.
• Check if the cable is connected firmly.
• Check the connection between the TV and the router.
Check Settings
• Change the IP address for the DNS server (“Checking the Network
Connection”) while referring to the following.
–Contact your Internet service provider.
–Specify the IP address of the router if you do not know the DNS of
your Internet service provider.
The server cannot be found, a • Once server settings are changed, turn the TV off and on by pressing 1
list cannot be retrieved, and
playback fails.
on the TV.
• Execute “Server Diagnostics”.
When using a PC as the server
• Check if the PC is turned on. Do not turn off the PC while accessing.
• If security software is installed on the PC, be sure to allow connections
from external devices. For details, refer to the manual supplied with your
security software.
• The load on the PC may be too high or the server application may
become unstable. Try the following:
–Stop the server application and restart it.
–Restart the PC.
–Reduce the number of applications running on the PC.
–Reduce the amount of content.
GB
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Condition
Explanation/Solution
Changes on the server are not • Sometimes changes are not applied to displays on the TV even though
being applied or displayed
content differs from content
on the server.
content has been added and/or deleted on the server. If this happens, go
back up one level and try opening the folder or server again.
Photo, music and/or video
files do not appear or icons are
not displayed.
Preliminary Check
• Check that the connected device supports DLNA.
• Operations are not guaranteed for all servers. Also, operations differ
depending on the features of the server and the content in question.
• Turn the connected device on.
Check Connections
• Check that the LAN cable and/or mains lead/AC power cord of the
server has not become disconnected.
Check Settings
• Check that the connected device is registered under “Server Display
Settings”.
• Check that the server is correctly configured.
• Check that the selected device is connected to the network and can be
accessed.
• If the “IP Address Settings” in “Network” under “Network Settings” is
set to “DHCP (DNS automatic)” or “DHCP (DNS manual)”, it may take
some time to recognise devices if there is no DHCP server. Execute
“Server Diagnostics”.
The TV cannot be found from
renderer-compatible device
(the controller).
Check Connections
• Check that the LAN cable and/or mains lead of the server has not
become disconnected.
Check Settings
• Check if the “Renderer Function” is activated.
• Check that the connected device is registered under “Renderer Access
Control”.
Only a few icons appear under • This is normal when internet connection is not available.
the "Network" in the Home
Menu.
You can use three pre-installed Widgets properly. To enjoy more
Widgets, please check that the LAN cable and/or mains lead/AC power
cord of the router/modem has not become disconnected. (*)
You have been using
registered Widgets, but now
• Check that the LAN cable and/or mains lead/AC power cord of the
router/modem has not become disconnected. (*)
some contents won't appear on • There's a possibility that the Widget Provider's server is out of service.
the Widgets.
Please try using the Widget later.
(*) Your router/modem must be properly set to connect to the internet in
advance. Please contact your Internet Service Provider for the router/
modem settings.
General
Auto Setup (freesat) is
• Check connections and dish alignment. The dish needs to be pointing at
stopped before it is completed. Astra 2 at 28.2° East, and Eurobird 1 at 28.5° East.
• If the problem persists, consult your freesat registered retailer or call
Some programmes cannot be • Check the aerial or dish.
tuned.
• The satellite cable might be short-circuited or there might be connection
problems of the cable. Please check the cable and connection and then
turn the TV Off with the Mains power On / Off switch, and turn it On
again.
• The frequency you entered is out of range. Please consult the received
satellite broadcasting company.
Distorted picture and/or
sound.
• Keep the TV away from electrical noise sources such as cars,
motorcycles, hair-dryers or optical equipment.
• When installing optional equipment, leave some space between the
optional equipment and the TV.
• Check the aerial/cable connection.
• Keep the aerial/cable TV cable away from other connecting cables.
GB
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Condition
Explanation/Solution
The TV turns off
automatically (the TV enters
• Check if the “Sleep Timer” is activated, or confirm the “Duration”
setting of “On Timer”.
standby mode).
• Check if the “Idle TV Standby” is activated.
• If no signal is received and no operation is performed in the TV mode
for 30 minutes, the TV automatically switches to standby mode.
The TV turns on
automatically.
• Check if the “On Timer” is activated.
Some input sources cannot be • Select “AV Preset” and cancel the “Skip” setting for the input source.
selected.
The remote does not function. • Replace the batteries.
HDMI equipment does not
appear on “HDMI Device
List”.
• Check that your equipment is compatible with Control for HDMI.
You cannot select “Off” in
“Control for HDMI”.
• If you have connected any audio system that is compatible with Control
for HDMI, you cannot select “Off” in this menu. If you want to change
the audio output to the TV speaker, select “TV Speaker” in the
“Speaker” menu.
Not all channels are tuned for • Check the support website for cable provide information.
cable.
GB
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Keep this Instruction
manual safe you’ll
need it
Television in the UK is going digital, bringing us all more.
Please see overleaf to find out when your area switches to digital.
Digital UK is the independent, non-profit organisation leading the process of digital TV switchover
in the UK. Digital UK provides impartial information on what people need to do to prepare for the
move to digital, and when they need to do it.
How the switchover affects your TV equipment:
Your new TV has a digital tuner built in, which means it is ready to receive the Freeview signal by
simply plugging it into your aerial socket (check if you can get digital TV through your aerial now,
When the TV switchover happens in your area, there are at least two occasions when you will need
to re-tune your TV in order to continue receiving your existing TV channels, and also to pick up
new ones. Digital UK, the body leading the digital TV switchover, will advise you when you need
to re-tune during the switchover.
GB
27
Download from Www.Somanuals.com. All Manuals Search And Download.
How to re-tune:
1
2
3
4
5
6
Press "HOME" on the remote
Press G/g to select "Settings"
Press F/f to select "Digital Set-up", then press
Press to select "Digital Auto Tuning"
Press G to select "Yes" then press to start "Digital Auto Tuning"
Follow the on screen instructions.
If you are missing any channels, it may be that they are not available in your area, or that your aerial
needs upgrading.
If you have any questions, please contact Sony on 08705 111 999 or call Digital UK on 0845 6 50
†Calls charged at BT rate of 3p per minute daytime and 1p per minute evenings and weekends.
Rates may vary for calls from non-BT lines.
GB
28
Download from Www.Somanuals.com. All Manuals Search And Download.
|