Sony Flat Panel Television 4 127 735 121 User Manual

LCD Digital Colour TV  
Operating Instructions  
KDL-32S55xx  
KDL-26S55xx  
KDL-22S55xx  
KDL-19S55xx  
© 2009 Sony Corporation  
4-127-735-12(1)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
: for digital channels only  
GB  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Start-up Guide  
KDL-32S55xx/KDL-26S55xx  
Accessory bag  
Screws  
1: Checking the  
accessories  
Remote RM-ED017 (1)  
Size AA batteries (R6 type) (2)  
Stand (1)  
Screws for stand (KDL-32S55xx/KDL-26S55xx (4),  
KDL-22S55xx/KDL-19S55xx (3))  
Table-Top  
Stand  
To insert batteries into the remote  
Push and slide to open.  
TV unit  
KDL-22S55xx/KDL-19S55xx  
Screws  
Accessory bag  
~
Observe the correct polarity when inserting batteries.  
Do not use different types of batteries together or mix  
old and new batteries.  
Dispose of batteries in an environmentally friendly way.  
Certain regions may regulate disposal of batteries.  
Please consult your local authority.  
Handle the remote with care. Do not drop or step on it,  
or spill liquid of any kind onto it.  
Do not place the remote in a location near a heat source,  
a place subject to direct sunlight, or a damp room.  
Table-Top  
Stand  
TV unit  
2: Attaching the stand  
Follow the assembling steps required to place on a  
TV stand.  
2 Gently slide the TV unit onto the neck of  
the Table-Top Stand and align the screws  
holes.  
1 Take out the Table-Top Stand and screws  
from the carton. The screws are found in  
the accessory bag.  
KDL-32S55xx/KDL-26S55xx  
Rear of TV  
GB  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
KDL-22S55xx/KDL-19S55xx  
Rear of TV  
3: Connecting an  
aerial/VCR/DVD  
recorder  
~
This product has been tested and found to compliant  
with the limits set out in the EMC Directive for using  
connection cables not longer than 3 meters (9.8 feet).  
~
When you carry the TV, place your hand as illustrated  
and hold it securely, see page 9. Do not put stress on the  
LCD panel and the frame around the screen.  
Connecting an aerial only  
Be careful not to pinch your hands or the mains lead  
when you install the TV to the Table-Top Stand.  
Coaxial cable  
3 Use the supplied screws to attach the TV  
unit to the Table-Top Stand.  
KDL-32S55xx/KDL-26S55xx  
Connecting an aerial/VCR/DVD recorder with SCART  
Screws  
KDL-22S55xx/KDL-19S55xx  
AV1  
AV2  
Screws  
Coaxial cable  
~
If an electric screw driver is used, set the torque to  
tighten at approximately 1.5 N·m {15 kgf·cm}.  
Scart lead  
Coaxial cable  
VCR/DVD recorder  
~
AV1 outputs available only for analogue TV.  
AV2 outputs to the current screen (except PC, HDMI,  
Component 1080i).  
Continued  
GB  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting an aerial/VCR/DVD recorder with HDMI  
4: Preventing the TV  
from toppling over  
KDL-32S55xx/KDL-26S55xx  
IN  
1
Coaxial  
cable  
2
HDMI cable  
3
Coaxial cable  
2
1
1 Install a wood screw (4 mm in diameter,  
not supplied) in the TV stand.  
VCR/DVD recorder  
2 Install a machine screw (M4 × 14 mm, not  
supplied) and a nut (M4, not supplied)  
from the bottom of the Table-Top Stand  
into the screw hole of the TV.  
KDL-22S55xx/KDL-19S55xx  
Adjust a strong cord line weight accordingly,  
to secure the machine screw and nut.  
~
Be sure to secure a machine screw and a nut.  
3 Tie the wood screw and the machine  
screw with a strong cord.  
IN  
z
1
An optional Sony support belt kit is used to secure the TV.  
Contact your nearest Sony Service Centre to purchase a  
kit. Have your TV model name ready for reference.  
Coaxial  
cable  
5: Bundling the cables  
HDMI cable  
You can bundle the connecting cables as illustrated below.  
Coaxial cable  
1
2
3
VCR/DVD recorder  
~
GB  
6
Do not bundle the mains lead with other connecting cables.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
~
When you turn on the TV, the power indicator light  
up in green.  
6: Adjusting the  
viewing angle of the TV  
3 Press F/f to select the language  
displayed on the menu screens, then  
press  
.
KDL-22S55xx/KDL-19S55xx only  
Auto Start-up  
This TV can be adjusted within the angle shown  
below.  
Language  
Country  
English  
Nederlands  
Location  
Adjust the angle back and forth (tilt)  
Italiano  
Deutsch  
3° 8°  
Right view  
Select:  
Confirm:  
4 Press F/f to select the country/region in  
Front  
which you will operate the TV, then press  
.
Auto Start-up  
7: Selecting the  
language, country/region  
and location  
Language  
Country  
Location  
-
United Kingdom  
Ireland  
Nederland  
Luxembourg  
France  
Italia  
Back:  
Select:  
Confirm:  
If the country/region which you want to use on  
the TV does not appear in the list, select “-”  
instead of a country/region.  
5 Press F/f to select the location type in  
which you will operate the TV, then  
press  
.
Auto Start-up  
DIGITAL ANALOG SCENE AUDIO  
Language  
Country  
GUIDE  
Location  
Home  
Shop  
3,4,5  
RETURN  
TOOLS  
MENU  
Back:  
Select:  
Confirm:  
In Shop mode, some settings will be periodically  
reset for Shop usage.  
1 Connect the TV to your mains socket  
(220-240V AC, 50Hz).  
This option selects the initial picture mode  
appropriate for the typical lighting condition in  
these environments.  
2 Press 1 on the side of the TV.  
When you turn on the TV for the first time, the  
Language menu appears on the screen.  
GB  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
5 Press MENU to exit.  
The TV has now tuned in all the available  
channels.  
8: Auto-tuning the TV  
1 Before you start auto-tuning the TV, insert  
a pre-recorded tape into the VCR  
connected to the TV (page 5) and start  
play back.  
Detaching the Table-  
The video channel will be located and stored on  
the TV during auto-tuning.  
If no VCR is connected to the TV, skip this step.  
Top Stand from the TV  
~
Do not remove the Table-Top Stand for any reason other  
than to wall-mount the TV.  
2 Press  
.
Auto Tuning  
KDL-32S55xx/KDL-26S55xx  
Do you want to start Auto Tuning?  
Back:  
Start:  
The TV starts searching for all available digital  
channels, followed by all available analogue  
channels. This may take some time, so do not  
press any buttons on the TV or remote while  
proceeding.  
Table-Top  
Stand  
KDL-22S55xx/KDL-19S55xx  
If a message appears for you to confirm the  
aerial connection  
No digital or analogue channels were found.  
Check all the aerial connections and press  
to  
start auto-tuning again.  
3 When the Programme Sorting menu  
appears on the screen, follow the steps of  
“Programme Sorting” (page 27).  
If you do not change the order in which the  
analogue channels are stored on the TV, go to  
next step.  
Table-Top  
Stand  
4 When the Eco Preset menu appears on  
the screen, if you press “Yes,” the “Eco”  
settings are changed to recommended  
values to reduce power consumption.  
Eco Preset  
Do you want to use the Eco Preset?  
Choosing "YES" will reduce power consumption.  
Power Saving  
Idle TV Standby  
Reduce  
3 h  
PC Power Management  
On  
Yes  
No  
GB  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Transporting  
Before transporting the TV set, disconnect all cables.  
Two or more people are needed to transport a large TV  
set.  
When transporting the TV set by hand, hold it as shown  
below. Do not put stress on the LCD panel and the frame  
around the screen.  
When lifting or moving the TV set, hold it firmly from  
the bottom.  
When transporting the TV set, do not subject it to jolts  
or excessive vibration.  
Safety information  
Installation/Set-up  
Install and use the TV set in accordance with the  
instructions below in order to avoid any risk of fire,  
electrical shock or damage and/or injuries.  
When transporting the TV set for repairs or when  
moving, pack it using the original carton and packing  
material.  
Installation  
The TV set should be installed near an easily accessible  
mains socket.  
KDL-32S55xx  
KDL-26S55xx/KDL-22S55xx/  
KDL-19S55xx  
Place the TV set on a stable, level surface.  
Only qualified service personnel should carry out wall  
installations.  
For safety reasons, it is strongly recommended that you  
use Sony accessories, including:  
KDL-32S55xx:  
– Wall-mount bracket SU-WL500  
KDL-26S55xx/KDL-22S55xx/KDL-19S55xx:  
– Wall-mount bracket SU-WL100  
Be sure to use the screws supplied with the Wall-mount  
bracket when attaching the mounting hooks to the TV  
set.  
The supplied screws are designed so that they are 8 mm  
to 12 mm in length when measured from the attaching  
surface of the mounting hook.  
The diameter and length of the screws differ depending  
on the Wall-mount bracket model. Use of screws other  
than those supplied may result in internal damage to the  
TV set or cause it to fall, etc.  
Ventilation  
Never cover the ventilation holes or insert anything in  
the cabinet.  
Leave space around the TV set as shown below.  
It is strongly recommended that you use a Sony wall-  
mount bracket in order to provide adequate air-  
circulation.  
8 mm-12 mm  
Installed on the wall  
Screw (supplied with the  
Wall-mount bracket)  
30 cm  
Mounting Hook  
Hook attachment on rear of TV set  
10 cm  
10 cm  
10 cm  
Leave at least this space around the set.  
Installed with stand  
30 cm  
6 cm  
10 cm  
10 cm  
Leave at least this space around the set.  
Continued  
GB  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
To ensure proper ventilation and prevent the collection  
of dirt or dust:  
– Do not lay the TV set flat, install upside down,  
backwards, or sideways.  
– Do not place the TV set on a shelf, rug, bed or in a  
closet.  
Prohibited Usage  
Do not install/use the TV set in locations,  
environments or situations such as those listed  
below, or the TV set may malfunction and cause a  
fire, electrical shock, damage and/or injuries.  
– Do not cover the TV set with a cloth, such as curtains,  
or items such as newspapers, etc.  
– Do not install the TV set as shown below.  
Location:  
Outdoors (in direct sunlight), at the seashore, on a ship or  
other vessel, inside a vehicle, in medical institutions,  
unstable locations, near water, rain, moisture or smoke.  
Air circulation  
is blocked.  
Air circulation  
is blocked.  
Environment:  
Places that are hot, humid, or excessively dusty; where  
insects may enter; where it might be exposed to mechanical  
vibration, near flammable objects (candles, etc).  
The TV set shall not be exposed to dripping or splashing  
and no objects filled with liquids, such as vases, shall be  
placed on the TV.  
Wall  
Wall  
Situation:  
Do not use when your hands are wet, with the cabinet  
removed, or with attachments not recommended by the  
manufacturer. Disconnect the TV set from mains socket  
and aerial during lightning storms.  
Broken pieces:  
Mains lead  
Do not throw anything at the TV set. The screen glass  
may break by the impact and cause serious injury.  
If the surface of the TV set cracks, do not touch it until  
you have unplugged the mains lead. Otherwise electric  
shock may result.  
Handle the mains lead and socket as follows in order  
to avoid any risk of fire, electrical shock or damage  
and/or injuries:  
– Use only mains leads supplied by Sony, not other  
suppliers.  
– Insert the plug fully into the mains socket.  
– Operate the TV set on a 220-240 V AC supply only.  
– When wiring cables, be sure to unplug the mains lead  
for your safety and take care not to catch your feet on  
the cables.  
– Disconnect the mains lead from the mains socket  
before working on or moving the TV set.  
– Keep the mains lead away from heat sources.  
– Unplug the mains plug and clean it regularly. If the  
plug is covered with dust and it picks up moisture, its  
insulation may deteriorate, which could result in a  
fire.  
When not in use  
If you will not be using the TV set for several days, the  
TV set should be disconnected from the mains for  
environmental and safety reasons.  
As the TV set is not disconnected from the mains when  
the TV set is just turned off, pull the plug from the mains  
to disconnect the TV set completely.  
However, some TV sets may have features that require  
the TV set to be left in standby to work correctly. The  
instructions in this manual will inform you if this  
applies.  
Notes  
For children  
Do not use the supplied mains lead on any other  
equipment.  
Do not allow children to climb on the TV set.  
Keep small accessories out of the reach of children, so  
that they are not mistakenly swallowed.  
Do not pinch, bend, or twist the mains lead excessively.  
The core conductors may be exposed or broken.  
Do not modify the mains lead.  
Do not put anything heavy on the mains lead.  
Do not pull on the mains lead itself when disconnecting  
the mains lead.  
If the following problems occur...  
Turn off the TV set and unplug the mains lead  
immediately if any of the following problems occur.  
Ask your dealer or Sony service centre to have it  
checked by qualified service personnel.  
Do not connect too many appliances to the same mains  
socket.  
Do not use a poor fitting mains socket.  
When:  
– Mains lead is damaged.  
– Poor fitting of mains socket.  
– TV set is damaged by being dropped, hit or having  
something thrown at it.  
– Any liquid or solid object falls through openings in  
the cabinet.  
GB  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disposal of the TV set  
Disposal of Old Electrical & Electronic  
Precautions  
Viewing the TV  
Equipment (Applicable in the European  
Union and other European countries  
with separate collection systems)  
This symbol on the product or on its  
packaging indicates that this product shall  
View the TV in moderate light, as viewing the TV in  
poor light or during long period of time, strains your  
eyes.  
not be treated as household waste. Instead it shall be  
handed over to the applicable collection point for the  
recycling of electrical and electronic equipment. By  
ensuring this product is disposed of correctly, you will help  
prevent potential negative consequences for the  
environment and human health, which could otherwise be  
caused by inappropriate waste handling of this product.  
The recycling of materials will help to conserve natural  
resources. For more detailed information about recycling  
of this product, please contact your local Civic Office, your  
household waste disposal service or the shop where you  
purchased the product.  
When using headphones, adjust the volume so as to  
avoid excessive levels, as hearing damage may result.  
LCD Screen  
Although the LCD screen is made with high-precision  
technology and 99.99% or more of the pixels are  
effective, black dots may appear or bright points of light  
(red, blue, or green) may appear constantly on the LCD  
screen. This is a structural property of the LCD screen  
and is not a malfunction.  
Do not push or scratch the front filter, or place objects on  
top of this TV set. The image may be uneven or the LCD  
screen may be damaged.  
If this TV set is used in a cold place, a smear may occur  
in the picture or the picture may become dark. This does  
not indicate a failure. These phenomena disappear as the  
temperature rises.  
Ghosting may occur when still pictures are displayed  
continuously. It may disappear after a few moments.  
The screen and cabinet get warm when this TV set is in  
use. This is not a malfunction.  
Disposal of waste batteries (applicable  
in the European Union and other  
European countries with separate  
collection systems)  
This symbol on the battery or on the  
packaging indicates that the battery provided  
with this product shall not be treated as  
The LCD screen contains a small amount of liquid  
crystal. Some fluorescent tubes used in this TV set also  
contain mercury. Follow your local ordinances and  
regulations for disposal.  
household waste. On certain batteries this symbol might be  
used in combinationwith a chemical symbol. The chemical  
symbols for mercury (Hg) or lead (Pb) are added if the  
battery contains more than 0.0005% mercury or 0.004%  
lead. By ensuring these batteries are disposed of correctly,  
you will help prevent potentially negative consequences  
for the environment and human health which could  
otherwise be caused by inappropriate waste handling of the  
battery. The recycling of the materials will help to conserve  
natural resources. In case of products that for safety,  
performance or data integrity reasons require a permanent  
connection with an incorporated battery, this battery should  
be replaced by qualified service staff only. To ensure that  
the battery will be treated properly, hand over the product  
at end-of-life to the applicable collection point for the  
recycling of electrical and electronic equipment. For all  
other batteries, please view the section on how to remove  
the battery from the product safely. Hand the battery over  
to the applicable collection point for the recycling of waste  
batteries. For more detailed information about recycling of  
this product or battery, please contact your local Civic  
Office, your household waste disposal service or the shop  
where you purchased the product.  
Handling and cleaning the screen surface/cabinet  
of the TV set  
Be sure to unplug the mains lead connected to the TV set  
from mains socket before cleaning.  
To avoid material degradation or screen coating  
degradation, observe the following precautions.  
To remove dust from the screen surface/cabinet, wipe  
gently with a soft cloth. If dust is persistent, wipe with a  
soft cloth slightly moistened with a diluted mild  
detergent solution.  
Never use any type of abrasive pad, alkaline/acid  
cleaner, scouring powder, or volatile solvent, such as  
alcohol, benzene, thinner or insecticide. Using such  
materials or maintaining prolonged contact with rubber  
or vinyl materials may result in damage to the screen  
surface and cabinet material.  
Periodic vacuuming of the ventilation openings is  
recommended to ensure to proper ventilation.  
When adjusting the angle of the TV set, move it slowly  
so as to prevent the TV set from moving or slipping off  
from its table stand.  
Optional Equipment  
Keep optional components or any equipment emitting  
electromagnetic radiation away from the TV set. Otherwise  
picture distortion and/or noisy sound may occur.  
GB  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Overview of the remote  
1 "/1 – TV standby  
Turns the TV on and off from standby mode.  
2 AUDIO  
Press to change the dual sound mode (page 25).  
DIGITAL ANALOG SCENE AUDIO  
GUIDE  
3 SCENE – Scene Select (page 15)  
4 Coloured buttons (page 15, 17)  
5
/
– Info/Text reveal  
• In digital mode: Displays brief details of the programme currently being  
RETURN  
TOOLS  
watched.  
• In analogue mode: Displays information such as current channel number  
MENU  
and screen format.  
• In Text mode (page 15): Reveals hidden information (e.g. answers to a  
quiz).  
6 F/f/G/g/  
7 TOOLS (page 15, 21)  
Enables you to access various viewing options and change/make  
adjustments according to the source and screen format.  
PROG  
9 Number buttons  
• In TV mode: Selects channels. For channel numbers 10 and above, press  
the second and third digit in quick succession.  
• In Text mode: Enters the three digit page number to select the page.  
0
qa  
– Digital Favourite list  
Press to display the Digital Favourite list that you have specified (page 17).  
– Previous channel  
Returns to the previous channel watched.  
qs PROG +/-/  
/
• In TV mode: Selects the next (+) or previous (-) channel.  
• In Text mode (page 15): Selects the next ( ) or previous ( ) page.  
qd 2 +/- – Volume  
qf % – Mute the sound  
qg / – Text (page 15)  
qh RETURN /  
Returns to the previous screen of any displayed menu.  
qj GUIDE /  
– EPG (Digital Electronic Programme Guide) (page 16)  
qk ANALOG – Analogue mode (page 14)  
ql DIGITAL – Digital mode (page 14)  
w;  
wa  
– Screen mode (page 15)  
– Input select  
Selects the input source from equipment connected to the TV sockets  
z
The number 5, PROG + and AUDIO buttons have tactile dots. Use the tactile dots  
as references when operating the TV.  
GB  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Overview of the TV buttons and indicators  
1 1 – Power  
Turns the TV on or off.  
~
To disconnect the TV completely, pull the plug  
from the mains.  
PROG  
When you turn on the TV, the power indicator  
lights in green.  
2 PROG +/-/  
/
• In TV mode: Selects the next (+) or previous (-)  
channel.  
• In TV menu: Moves through the options up (  
or down ( ).  
)
3 2 +/-/  
/
• In TV mode: Increases (+) or decreases (-) the  
volume.  
• In TV menu: Moves through the options right  
(
) or left ( ).  
4
5
/
– Input select / OK  
• In TV mode: Selects the input source from  
equipment connected to the TV sockets  
• In TV menu: Selects the menu or option, and  
confirms the setting.  
6 Remote control sensor  
• Receives IR signals from the remote.  
• Do not put anything over the sensor, as its  
function may be affected.  
7
– Picture Off / Sleep Timer indicator  
• Lights up in green when the picture is switched  
• Lights up in orange when the sleep timer is set  
8 1 – Standby indicator  
Lights up in red when the TV is in standby mode.  
9 " – Power indicator  
Lights up in green when the TV is turned on.  
~
Make sure that the TV is completely turned off before  
unplugging the mains lead. Unplugging the mains lead  
while the TV is turned on may cause the indicator to  
remain lit or may cause the TV to malfunction.  
GB  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Watching TV  
1 Press 1 on the side of the TV to turn on  
the TV.  
Watching TV  
When the TV is in standby mode (the 1  
(standby) indicator on the TV front panel is red),  
press "/1 on the remote to turn on the TV.  
2 Press DIGITAL to switch to digital mode,  
or ANALOG to switch to analogue mode.  
The channels available vary depending on the  
mode.  
3 Press the number buttons or PROG +/- to  
select a TV channel.  
To select channel numbers 10 and above using  
the number buttons, press the second and third  
digits in quick succession.  
To select a digital channel using the Digital  
Electronic Programme Guide (EPG), see  
DIGITAL ANALOG SCENE AUDIO  
2
In digital mode  
An information banner appears briefly. The  
following icons may be indicated on the banner.  
2
GUIDE  
:
Interactive service is available (MHEG  
Digital Text)  
:
Interactive service (MHEG Digital Text) is  
currently disabled  
RETURN  
TOOLS  
MENU  
:
:
Radio service  
Scrambled/Subscription service  
Multiple audio languages available  
Subtitles available  
:
:
:
:
3
3
Subtitles available for the hearing impaired  
Recommended minimum age for current  
programme (from 4 to 18 years)  
:
Parental Lock  
PROG  
Additional operations  
To  
Do this  
Press 2 + (increase)/  
Adjust the volume  
- (decrease).  
Access the  
Press . To select an analogue  
Programme index  
table (in analogue  
mode only)  
channel, press F/f, then press  
.
Access the Digital  
Press  
.
Favourites (in digital For details, see page 17.  
mode only)  
GB  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
To access Text  
Press /. Each time you press /, the display  
changes cyclically as follows:  
Text t Text over the TV picture (mix mode) tNo  
Text (exit the Text service)  
Wide  
Stretches a 4:3 picture  
horizontally, to fill a  
16:9 screen.  
To select a page, press the number buttons or  
.
/
Zoom*  
14/9*  
Displays  
cinemascopic (letter  
box format)  
broadcasts in the  
correct proportions.  
To reveal hidden information, press  
.
z
When four coloured items appear at the bottom of the  
Text page, Fastext is available. Fastext allows you to  
access pages quickly and easily. Press the corresponding  
coloured button to access the page.  
Displays 14:9  
broadcasts in the  
correct proportions.  
As a result, black  
border areas are  
visible on the screen.  
Scene Select mode  
Select “General,” “Cinema,” “Sports,” “Game” or  
“Photo.” When you set a mode, optimum audio and  
picture quality (based on content type) are  
automatically set.  
Subtitle*  
Displays  
cinemascopic (letter  
box format)  
broadcasts with  
subtitles on the screen.  
1 Press SCENE on the remote control.  
2 Press F/f/G/g to select the mode, then  
press  
.
Auto  
General: Current user settings.  
“Screen Format” is set to “Auto”, automatically changes  
the screen format to suit the broadcast signal.  
Cinema: Delivers a theatre-like picture and sound.  
Sports: Delivers a realistic picture with surround  
sound.  
“Auto” is available for PAL and SECAM signals only.  
Game: Delivers a picture that lets you enjoy game-  
playing to the fullest with the best picture and sound  
quality.  
* Parts of the top and bottom of the picture may be cut off.  
~
Depending on the signal, some screen formats may not  
Photo: Delivers a picture that reproduces the  
texture and colour of a printed photo.  
be selectable.  
Some characters and/or letters at the top and the bottom  
of the picture may not be visible in “Smart”.  
z
z
If any scene mode is selected, picture mode selection in the  
picture menu is not possible - release scene selection first.  
You can adjust the vertical position of the picture when  
selecting “Smart”, “Zoom”, “14/9” or “Subtitle”. Press  
F/f to move up or down (e.g. to read subtitles).  
Not available for  
and in “Photo / Music” menu.  
PC input,  
HDMI PC input  
Using the Tools menu  
To change the screen format manually to  
suit the broadcast  
Press TOOLS to display the following options when  
viewing a TV programme.  
Press  
repeatedly to select the desired screen format.  
Options  
Description  
Close  
Closes the Tools menu.  
Smart*  
Displaysconventional  
4:3 broadcasts with an  
imitation wide screen  
effect. The 4:3 picture  
is stretched to fill the  
screen.  
Picture Mode  
Sound Effect  
Speaker  
Audio Language (in  
digital mode only)  
4/3  
Subtitle Setting (in  
digital mode only)  
Displays  
conventional 4:3  
broadcasts (e.g. non-  
wide screen TV) in  
the correct  
Sleep Timer  
Power Saving  
System Information (in Displays the system  
digital mode only) information screen.  
proportions.  
GB  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Using the Digital Electronic Programme Guide  
(EPG)  
*
1 In digital mode, press GUIDE.  
2 Perform the desired operation as shown  
in the following table or displayed on the  
screen.  
Fri 3 Nov 15:39  
Today  
001 BBC ONE  
002 BBC TWO  
003 ITV 1  
15:30  
16:00  
16:30  
17:00  
004 Channel 4  
005 five  
006 ITV 2  
007 BBC THREE  
009 Teletext  
010 BBC FOUR  
011 Sky Travel  
012 UKTV History  
013 More 4  
Previous  
Select:  
Next  
Tune:  
+1 day  
Options:  
Digital Electronic Programme Guide (EPG)  
* This function may not be available in some countries/regions.  
To  
Do this  
Watch a programme  
Press F/f/G/g to select the programme, then press  
.
Turn off the EPG  
Press GUIDE.  
~
If an age restriction for programmes has been selected, a message asking for a PIN code will appear on the screen. For  
GB  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using the Digital Favourite list  
*
The Favourite feature allows you to specify up to  
four lists of your favourite programmes.  
---  
Favourite Set-up  
Enter Programme number  
Favourites 1  
001  
002  
003  
004  
005  
006  
007  
008  
009  
010  
TV3  
011  
012  
013  
014  
015  
016  
017  
018  
019  
020  
SETenVEO  
Tienda en VEO  
NET TV  
1 In digital mode, press  
2 Perform the desired operation as shown  
in the following table or displayed on the  
screen.  
.
33  
3/24  
K3/300  
TVE1  
CUATRO  
CNN+  
TVE2  
40 LATINO  
la Sexta  
24H TVE  
CLAN TVE  
TELEDEPORTE  
VEO  
Telecinco  
T5 Estrellas  
T5 Sport  
Previous  
Next  
Favourites 2  
Clear List  
Back:  
Select:  
Clear favourite  
Digital Favourite list  
* This function may not be available in some countries/regions.  
To  
Do this  
Create your Favourite list for the first  
time  
1 Press to select “Yes”.  
2 Press the yellow button to select the Favourite list.  
3 Press F/f/G/g to select the channel you want to add, then  
press  
.
Channels that are stored in the Favourite list are indicated by a  
symbol.  
4 Press RETURN to finish setting up.  
Watch a channel  
1 Press the yellow button to navigate through your Favourite  
lists.  
2 Press F/f to select the channel, then press  
Press RETURN.  
.
Turn off the Favourite list  
Add or remove channels in the  
currently edited Favourite list  
1 Press the blue button.  
2 Press the yellow button to select the Favourite list you want to  
edit.  
3 Press F/f/G/g to select the channel you want to add or  
remove, then press  
.
Remove all channels from the current  
Favourite list  
1 Press the blue button.  
2 Press the yellow button to select the Favourite list you want to  
edit.  
3 Press the blue button.  
4 Press G/g to select “Yes”, then press to confirm.  
GB  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Using Optional Equipment  
Connecting optional equipment  
You can connect a wide range of optional equipment to your TV. Connecting cables are not supplied.  
KDL-32S55xx/KDL-26S55xx  
DVD player  
with  
component  
output  
DVD player  
PC (HDMI output)  
Blu-ray disc player  
Digital video camera  
A
B
C
COMPONENT PC IN  
N  
IN  
1
2
AV1  
AV2  
Hi-Fi audio  
equipment  
F
G
PC  
D
Video game  
equipment  
DVD player  
Decoder  
E
H
CAM card  
DVD recorder  
VCR  
Decoder  
I
Digital video camera/Digital  
camera/USB storage  
J
PC/Digital  
video camera  
Video game  
equipment/  
DVC  
K
L
camcorder  
Headphones  
GB  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
KDL-22S55xx/KDL-19S55xx  
DVD player  
with  
component  
output  
DVD player  
PC (HDMI output)  
Blu-ray disc player  
Digital video camera  
A
M
COMPONENT PC IN  
N  
AV1  
AV2  
IN  
1
Hi-Fi audio  
equipment  
F
G
PC  
D
Video game  
equipment  
DVD player  
Decoder  
E
H
CAM card  
DVD recorder  
VCR  
Decoder  
I
Digital video camera/Digital  
camera/USB storage  
N
PC/Digital  
video camera  
Video game  
equipment/  
DVC  
K
L
camcorder  
Headphones  
GB  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Symbol on the  
screen  
Description  
Viewing pictures from  
connected equipment  
For KDL-22S55xx/KDL-19S55xx  
HDMI1 or  
HDMI2  
HDMI IN 1 or HDMI IN 2  
To see the equipment connected to  
M or N.  
Turn on the connected equipment, then  
perform one of the following operation.  
Digital video and audio signals are  
input from the connected  
equipment.  
For an auto-tuned VCR (page 8)  
In analogue mode, press PROG +/-, or the number  
buttons, to select the video channel.  
If the equipment has a DVI socket,  
connect the DVI socket to the  
HDMI IN 1 socket through a DVI-  
HDMI adaptor interface (not  
supplied), and connect the  
equipment’s audio out sockets to  
the audio in sockets in the HDMI  
IN 1 sockets.  
Connect to the HDMI IN 2 socket,  
to view photographs or screen  
images from a PC or digital video  
camera.  
For other connected equipment  
Press  
to display the connected equipment list.  
Press F/f to select the desired input source, then  
press . (The highlighted item is selected if two  
seconds pass without any operation after pressing F/  
f.)  
For a USB device  
AV1/  
AV1  
AV1/ To see the equipment connected to  
Symbol on the  
screen  
Description  
D.  
Component To see the equipment connected to  
AV2/  
AV2  
AV2/ To see the equipment connected to  
A.  
E.  
For KDL-32S55xx/KDL-26S55xx  
PC  
To see the equipment connected to  
G.  
HDMI1,  
HDMI2 or  
HDMI3  
HDMI IN 1, HDMI IN 2 or HDMI  
IN 3  
To see the equipment connected to  
B, C or J.  
z
It is recommended to use a PC  
cable with ferrites like the  
“Connector, D-sub 15” (ref. 1-  
793-504-11, available in Sony  
Service Centre), or equivalent.  
Digital video and audio signals are  
input from the connected  
equipment.  
USB  
AV3  
To see the equipment connected to  
I.  
To view photographs or listen to  
the music on USB storage media  
connected to the TV.  
If the equipment has a DVI socket,  
connect the DVI socket to the  
HDMI IN 2 socket through a DVI-  
HDMI adaptor interface (not  
supplied), and connect the  
equipment’s audio out sockets to  
the audio in sockets in the HDMI  
IN 2 sockets.  
Connect to the HDMI IN 3 socket,  
to view photographs or screen  
images from a PC or digital video  
camera.  
To see the equipment connected to  
K.  
When connecting mono  
equipment, connect to the  
AV3 L socket.  
~
Be sure to use only an authorised HDMI cable bearing  
the HDMI logo. We recommend that you use a Sony  
HDMI cable.  
When HDMI control compatible equipment is  
connected, communication with the connected  
equipment is supported. Refer to page 22 to set up this  
communication.  
GB  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
To connect  
Do this  
Playing Back Photo/  
Music via USB  
Conditional  
To use Pay Per View services.  
Access Module For details, refer to the instruction  
(CAM) H  
manual supplied with your CAM. To  
use the CAM, remove the “dummy”  
card from the CAM slot. Turn off  
the TV when inserting your CAM  
into the CAM slot. When you do not  
use the CAM, we recommend that  
the “dummy” card be inserted and  
kept in the CAM slot.  
You can enjoy photo/music files stored in a Sony  
digital still camera or camcorder through a USB  
cable or USB storage media on your TV.  
1 Connect a supported USB device to the  
TV.  
~
2 Press MENU.  
CAM is not supported in some  
countries/regions. Check with your  
authorised dealer.  
3 Press F/fto select “Photo / Music,” then  
press  
.
Hi-Fi audio  
equipment F  
Connect to the audio output sockets  
to listen to the sound from the  
TV on Hi-Fi audio equipment.  
4 Press F/f/G/g to select a file or folder,  
then press  
.
When you select a folder, select a file, then press  
.
Playback starts.  
Headphones L Connect to the i socket to listen to  
sound from the TV on headphones.  
~
Additional operation  
Picture quality may appear coarse when using “Photo”  
because images may be enlarged depending on the file.  
Also, images may not fill the entire screen depending on  
the image size and aspect ratio.  
Some photo files may take some time to be displayed  
when using “Photo.”  
To  
Do this  
Return to normal  
TV mode  
Press DIGITAL or ANALOG.  
The file name and folder name support only English.  
While the TV is accessing the data on the USB device,  
observe the following:  
– Do not turn off the TV or connected USB device.  
– Do not disconnect the USB cable.  
Using the Tools menu  
Press TOOLS to display the following options when  
viewing pictures from connected equipment.  
– Do not remove the USB device.  
The data on the USB device may be damaged.  
Options  
Description  
Sony will not be held liable for any damage to, or loss of,  
data on the recording media due to a malfunction of any  
connected devices or the TV.  
USB playback is supported for the following photo file  
formats:  
Close  
Closes the Tools menu.  
Picture Mode (except See page 24.  
PC input mode, USB  
input mode)  
– JPEG (JPEG format files with the extension “.jpg”  
and conforming to DCF 2.0 or Exif 2.21)  
When you connect a Sony digital still camera, set the  
camera’s USB connection mode to Auto or “Mass  
Storage.” For more information about USB connection  
mode, refer to the instructions supplied with your digital  
camera.  
Display Mode (in PC See page 24.  
input mode only)  
Sound Effect  
Speaker  
USB playback is supported for the following music file  
formats:  
Horizontal Shift (in  
PC input mode only)  
– MP3 (files with the extension “.mp3” that have not  
been copyrighted)  
USB Photo Viewer supports FAT16 and FAT32 file  
systems.  
Depending on the exact file specifications, some files,  
including those modified on a PC, cannot be played even  
if the file format is supported.  
Check the website below for updated information about  
compatible USB devices.  
Vertical Shift (in PC See page 26.  
input mode only)  
Sleep Timer (except See page 26.  
PC input mode)  
Power Saving  
GB  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Using control for HDMI  
The control for HDMI function enables the TV to  
communicate with the connected equipment that is  
compatible with the function, using HDMI CEC  
(Consumer Electronics Control). For example, by  
connecting Sony equipment that is compatible with  
control for HDMI (with HDMI cables), you can  
control them together.  
Be sure to connect the equipment correctly, and  
make the necessary settings.  
To make the control for HDMI settings  
The control for HDMI settings must be set on both  
the TV side and connected equipment side. See  
HDMI Set-upon page 27 for the TV side settings.  
For settings on the connected equipment, refer to the  
operating instructions for that equipment.  
Control for HDMI functions  
• Turns the connected equipment off interlocked  
with the TV.  
• Turns the TV on interlocked with the connected  
equipment and automatically switches the input to  
the equipment when the equipment starts to play.  
GB  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using MENU Functions  
5 External Inputs  
Selects equipment connected to your TV.  
• To watch the desired external input, select  
Navigating through  
menus  
“MENU” allows you to enjoy various convenient  
features of this TV. You can easily select channels or  
inputs sources and change the settings for your TV.  
the input source, then press  
6 Photo / Music  
Displays the “Photo / Music” menu (page 21).  
7 Settings  
.
Displays the “Settings” menu where most of  
the advanced settings and adjustments are  
performed.  
1 Press F/f to select a menu icon,  
then press  
.
2 Press F/f/G/gto select an option or  
DIGITAL ANALOG SCENE AUDIO  
adjust a setting, then press  
.
For details about settings, see page 24 to 30.  
~
GUIDE  
The options you can adjust vary depending on  
the situation. Unavailable options are greyed  
out or not displayed.  
2
RETURN  
TOOLS  
* This function may not be available in some  
countries/regions.  
MENU  
1
1 Press MENU.  
2 Press F/fto select an option, then press  
.
To exit the menu, press MENU.  
MENU  
Digital Favourites  
Analogue  
Digital  
Digital EPG  
External Inputs  
Photo / Music  
Settings  
Select:  
Enter:  
Exit:  
1 Digital Favourites*  
Displays the Favourite list (page 17).  
2 Analogue  
Returns to the last viewed analogue channel.  
3 Digital*  
Returns to the last viewed digital channel.  
4 Digital EPG*  
Displays the Digital Electronic Programme  
Guide (EPG) (page 16).  
GB  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Settings  
Picture Adjustment  
Selects the picture mode except for PC input source.  
Picture Mode  
“Vivid”: For enhanced picture contrast and sharpness.  
“Standard”: For standard picture. Recommended for home entertainment.  
“Cinema”: For viewing film-based content. Most suitable for viewing in a theatre-  
like environment.  
“Photo”: For photographs.  
Selects the display mode for PC input source.  
“Video”: For video images.  
“Text”: For text, charts or tables.  
“Photo”: For photographs.  
Display Mode (only  
in PC mode)  
Adjusts the brightness of the backlight.  
Increases or decreases picture contrast.  
Brightens or darkens the picture.  
Backlight  
Contrast  
Brightness  
Colour  
Increases or decreases colour intensity.  
Increases or decreases the green tones and red tones.  
z
Hue  
“Hue” can only be adjusted for an NTSC colour signal (e.g., U.S.A. video tapes).  
Sharpens or softens the picture.  
Sharpness  
Adjusts the whiteness of the picture.  
Colour Tone  
“Cool”: Gives the white colours a blue tint.  
“Neutral”: Gives the white colours a neutral tint.  
“Warm”: Gives the white colours a red tint.  
z
“Warm” can not be selected when you set “Picture Mode” to “Vivid”.  
Reduces the picture noise (snowy picture) in a weak broadcast signal.  
“High/Medium/Low”: Modifies the effect of the noise reduction.  
“Off”: Turns off the “Noise Reduction” feature.  
Noise Reduction  
Reduces the picture noise in MPEG-compressed video.  
MPEG Noise  
Reduction  
GB  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Resets all “Picture Adjustment” settings except “Picture Mode” and “Display Mode”  
(only in PC mode) to the factory settings.  
Reset  
~
“Brightness”, “Colour”, “Hue” and “Sharpness” are not available when “Picture Mode” is set to “Vivid” or when “Display  
Mode” is set to “Text”.  
Sound Adjustment  
Selects the sound mode.  
Sound Effect  
“Dynamic”: Intensifies clarity and sound presence for better intelligibility and  
musical realism.  
“Standard”: Enhances clarity, detail, and sound presence.  
“Clear Voice”: Makes voice sound clearer.  
Selects the surround mode.  
Surround  
“Surround”: For surround sound (for stereo programmes only).  
“Simulated Stereo”: Adds a surround-like effect to mono programs.  
“Off”: For normal stereo or mono reception.  
Adjusts higher-pitched sounds.  
Treble  
Adjusts lower-pitched sounds.  
Bass  
Emphasizes left or right speaker balance.  
Resets all the “Sound Adjustment” settings to the factory settings.  
Balance  
Reset  
Selects the sound from the speaker for a stereo or bilingual broadcast.  
“Stereo”, “Mono”: For a stereo broadcast.  
Dual Sound  
“A”/“B”/“Mono”: For a bilingual broadcast, select “A” for sound channel 1, “B”  
for sound channel 2, or “Mono” for a mono channel, if available.  
z
If you select other equipment connected to the TV, set “Dual Sound” to “Stereo”, “A” or  
“B”.  
Keeps a constant volume level even when volume level gaps occur (e.g., adverts tend  
to be louder than programmes).  
Auto Volume  
Speaker  
Turns on/off the TV’s internal speakers.  
“TV Speaker”: The TV speakers are turned on in order to listen to the TV’s sound  
through the TV speakers.  
“Audio System”: The TV speakers are turned off in order to listen to the TV’s sound  
only through your external audio equipment connected to the audio output sockets.  
~
“Sound Effect”, “Surround”, “Treble”, “Bass”, “Balance”, “Reset” and “Auto Volume” are not available when “Speaker”  
is set to “Audio System”.  
GB  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Eco  
Selects the power saving mode to reduce the power consumption of the TV.  
“Standard”: Default settings.  
Power Saving  
“Reduce”: Reduces the power consumption of the TV.  
“Picture Off”: Switches off the picture. You can listen to the sound with the picture  
off.  
Selects the time (“1h”, “2h” or “3h”) to set the TV into standby mode automatically,  
if you do not operate the TV for the specified period of time.  
Idle TV Standby  
When this is set to “On,” turns to standby mode if no PC signal is received. Only  
available in PC input.  
PC Power  
Management  
Resets all the “Eco” settings to the factory settings.  
Reset  
Features  
Changes the screen format. For details about the screen format, see page 15.  
Screen Format  
z
“Auto” is available for PAL and SECAM signals only.  
“Normal”: Displays the picture in its original size.  
“Full”: Enlarges the picture to fill the display area.  
Screen Format  
(only in PC mode)  
Adjusts the horizontal picture position so that the picture is in the middle of the  
screen.  
RGB Centre  
z
This option is only available if an RGB source has been connected to the Scarts connectors  
AV1 or AV2 on the rear of the TV.  
/
/
/
/
Customizes the TV screen as a PC monitor.  
PC Adjustment  
z
This option is only available if a PC signal is received.  
“Phase”: Adjusts the screen when a part of a displayed text or image is not clear.  
“Pitch”: Enlarges or shrinkes the screen size horizontally.  
“Horizontal Shift”: Moves the screen to the left or to the right.  
“Vertical Shift”: Moves the screen up or down.  
“Reset”: Resets to the factory settings.  
Sets a period of time after which the TV automatically switches itself into standby  
mode.  
Sleep Timer  
When the “Sleep Timer” is activated, the (Sleep Timer) indicator on the TV front  
panel lights up in orange.  
z
• When you turn off the TV and turn it on again, “Sleep Timer” is reset to “Off”.  
• A notification message appears on the screen one minute before the TV switches to standby  
mode.  
GB  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Set-up  
Starts the initial set-up to select the language, country/region and location, and tune  
in all available digital and analogue channels. Usually, you do not need to do this  
operation because the language and country/region will have been selected and  
channels already tuned when the TV was first installed (page 8). However, this  
option allows you to repeat the process (e.g., to retune the TV after moving house).  
Auto Start-up  
Selects the language in which the menus are displayed.  
Language  
Tunes in all the available analogue channels.  
Auto Tuning  
(Only in analogue  
mode)  
Usually you do not need to do this operation because the channels are already tuned  
when the TV was first installed (page 8). However, this option allows you to repeat  
the process (e.g., to retune the TV after moving house, or to search for new channels  
that have been launched by broadcasters).  
Changes the order in which the analogue channels are stored on the TV.  
Programme Sorting  
(Only in analogue  
mode)  
1
Press F/f to select the channel you want to move to a new position,  
then press g.  
2
Press F/f to select the new position for your channel, then press  
.
Assigns a name to any equipment connected to the side and rear sockets. The name  
will be displayed briefly on the screen when the equipment is selected.  
AV Preset  
1
2
Press F/f to select the desired input source, then press  
.
Press F/f to select the desired option below, then press  
.
AV1 (or AV2/AV3/HDMI1/HDMI2/HDMI3 (KDL-32S55xx, KDL-26S55xx only)/  
Component/PC), VIDEO, DVD, CABLE, GAME, CAM, SAT: Uses one of the preset  
labels to assign a name to connected equipment.  
• “Edit”: Creates your own label.  
1 Press F/f to select the desired letter or number (“_” for a blank  
space), then press g.  
If you input a wrong character  
Press G/g to select the wrong character. Then, press F/f to select the correct  
character.  
2 Repeat the procedure in step 1 until the name is completed, then  
press  
.
Allows the TV to communicate with equipment that is compatible with the control  
for HDMI function, and connected to the HDMI sockets of the TV. Note that  
communication settings must also be made on the connected equipment.  
“Control for HDMI”: Sets whether or not to link the operations of the TV and the  
connected equipment that is compatible with control for HDMI.  
“Auto Devices Off”: When this is set to “On”, the connected equipment that is  
compatible with control for HDMI turns off when you switch the TV to standby  
mode using the remote.  
HDMI Set-up  
“Auto TV On”: When this is set to “On”, the TV turns on when you turn on the  
connected equipment that is compatible with control for HDMI.  
“Device List Update”: Creates or updates the “HDMI Device List”. Up to 11  
compatible equipment items can be connected, and up to 5 equipment items can be  
connected to a single socket. Be sure to update the “HDMI Device List” when you  
change the connections or settings.  
“HDMI Device List”: Displays a list of connected equipment that is compatible  
with control for HDMI.  
Continued  
GB  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Sets an independent volume level to each equipment connected to the TV.  
Sound Offset  
Changes the available analogue channel setting.  
Press F/f to select the programme number you want to modify. Then, press  
Manual Programme  
Preset  
.
(Only in analogue  
mode)  
System  
Presets programme channels manually.  
1
2
Press F/f to select “System”, then press  
.
Press F/f to select one of the following TV broadcast systems, then  
press G.  
B/G: For western European countries/regions  
I: For the United Kingdom  
D/K: For eastern European countries/regions  
L: For France  
~
Depending on the country/region selected for “Country” (page 7), this option may not be  
available.  
Channel  
1
2
Press F/f to select “Channel”, then press  
.
Press F/f to select “S” (for cable channels) or “C” (for terrestrial  
channels), then press g.  
Tune the channels as follows:  
3
If you do not know the channel number (frequency)  
Press F/f to search for the next available channel. When a channel has been found,  
the search will stop. To continue searching, press F/f.  
If you know the channel number (frequency)  
Press the number buttons to enter the channel number of the broadcast you want or  
your VCR channel number.  
4
Press  
to jump to “Confirm”, then press  
.
Repeat the procedure above to preset other channels manually.  
Label  
Assigns a name of your choice, up to five letters or numbers, to the selected channel.  
AFT  
Allows you to fine-tune the selected programme number manually if you feel that a  
slight tuning adjustment will improve the picture quality.  
Audio Filter  
Improves the sound for individual channels in the case of distortion in mono  
broadcasts. Sometimes a non-standard broadcast signal can cause sound distortion or  
intermittent sound muting when watching mono programmes.  
If you do not experience any sound distortion, we recommend that you leave this  
option set to the factory setting “Off”.  
~
“Audio Filter” is not available when “System” is set to “L”.  
Skip  
Skips unused analogue channels when you press PROG +/- to select channels. (You  
can still select a skipped channel using the number buttons.)  
Confirm  
Saves changes made to the “Manual Programme Preset” settings.  
GB  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Digital Set-up  
Digital Tuning  
Digital Auto Tuning  
Tunes in the available digital channels.  
This option allows you to retune the TV after moving house, or to search for new  
channels that have been launched by broadcasters. Press  
.
Programme List Edit  
Removes any unwanted digital channels stored on the TV, and changes the order of  
the digital channels stored on the TV.  
1 Press F/f to select the channel you want to remove or move to a new  
position.  
Press the number buttons to enter the known three-digit programme number of the  
broadcast you want.  
2 Remove or change the order of the digital channels as follows:  
To remove the digital channel  
Press . After a confirmation message appears, press  
G
to select “Yes”, then press  
.
To change the order of the digital channels  
Press g, then press F/f to select the new position for the channel and press G.  
3 Press RETURN.  
Digital Manual Tuning  
Tunes the digital channels manually.  
1 Press the number button to select the channel number you want to  
manually tune, then press F/f to tune the channel.  
2 When the available channels are found, press  
to store programmes.  
Repeat the above procedure to manually tune other channels.  
Digital Set-up  
Subtitle Set-up  
“Subtitle Setting”: When “For Hard Of Hearing” is selected, some visual aids may  
also be displayed with the subtitles (if TV channels broadcast such information).  
“Subtitle Language”: Selects which language subtitles are displayed in.  
Audio Set-up  
“Audio Type”: Switches to broadcast for the hearing impaired when “For Hard Of  
Hearing” is selected.  
“Audio Language”: Selects the language used for a programme. Some digital  
channels may broadcast several audio languages for a programme.  
“Audio Description”: Provides audio description (narration) of visual information  
if TV channels broadcast such information.  
“Mixing Level”: Adjusts the TV main audio and Audio Description output levels.  
z
This option is only available when “Audio Description” is set to “On”.  
Banner Mode  
“Basic”: Displays programme information with a digital banner.  
“Full”: Displays programme information with a digital banner, and displays detailed  
programme information below that banner.  
Parental Lock  
Sets an age restriction for programmes. Any programme that exceeds the age  
restriction can only be watched after a PIN Code is entered correctly.  
1 Press the number buttons to enter your existing PIN code.  
If you have not previously set a PIN, a PIN code entry screen appears. Follow the  
instructions of “PIN Code” below.  
2 Press F/f to select the age restriction or “None” (for unrestricted  
watching), then press  
.
Continued  
GB  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
3 Press RETURN.  
PIN Code  
To set your PIN for the first time  
1 Press the number buttons to enter the new PIN code.  
2 Press RETURN.  
To change your PIN  
1 Press the number buttons to enter your existing PIN code.  
2 Press the number buttons to enter the new PIN code.  
3 Press RETURN.  
z
PIN code 9999 is always accepted.  
Technical Set-up  
“Auto Service Update”: Enables the TV to detect and store new digital services as  
they become available.  
“System Update”: Enables the TV to automatically receive software updates, free  
through your existing aerial (when issued). Sony recommends that this option is set  
to “On” at all times. If you do not want your software to be updated, set this option  
to “Off”.  
“System Information”: Displays the current software version and the signal level.  
“Time Zone”: Allows you to manually select the time zone you are in, if it is not the  
same as the default time zone setting for your country/region.  
“Auto DST”: Sets whether or not to automatically switch between summer time and  
winter time.  
“On”: Automatically switches between summer time and winter time according to the  
calendar.  
“Off”: The time is displayed according to the time difference set by “Time Zone”.  
CA Module Set-up  
Allows you to access a pay TV service once you obtain a Conditional Access Module (CAM)  
and a view card. See page 18 for the location of the  
(PCMCIA) socket.  
GB  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Additional Information  
Installing the Accessories (Wall-Mount Bracket)  
To Customers:  
For product protection and safety reasons, Sony strongly recommends that installing of your TV be  
performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.  
To Sony Dealers and Contractors:  
Provide full attention to safety during the installation, periodic maintenance and examination of this product.  
Your TV can be installed using the Wall-Mount Bracket SU-WL500 or SU-WL100 (sold separately).  
Refer to the Instructions supplied with the Wall-Mount Bracket to properly carry out the installation.  
Refer to “Detaching the Table-Top Stand from the TV” (page 8).  
Refer to “TV installation dimensions table” (page 32).  
Refer to “Screw and Hook locations diagram/table” (page 33).  
~
Place the TV on the Table-Top Stand, when securing the Mounting Hook.  
SU-WL500 for KDL-32S55xx  
Screw  
(+PSW6 × 16)  
Square hole  
Mounting Hook  
SU-WL100 for KDL-26S55xx/KDL-22S55xx/KDL-19S55xx  
Screw  
(+PSW4 × 12)  
0
0
5
0 1  
5
0 1  
1 5  
1 5  
2 0  
2 0  
Mounting Hook  
Sufficient expertise is required for installing this product, especially to determine the strength of the wall for  
withstanding the TV’s weight. Be sure to entrust the attachment of this product to the wall to Sony dealers  
or licensed contractors and pay adequate attention to safety during the installation. Sony is not liable for any  
damage or injury caused by mishandling or improper installation.  
GB  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
TV installation dimensions table  
KDL-32S55xx  
Screen centre point  
KDL-26S55xx/KDL-22S55xx  
Screen centre point  
KDL-19S55xx  
Screen centre point  
Unit: cm  
Length for each mounting angle  
Screen centre  
dimension  
Display dimensions  
Model Name  
Angle (0°)  
Angle (20°)  
A
B
C
D
E
F
G
H
KDL-32S55xx  
KDL-26S55xx  
KDL-22S55xx  
KDL-19S55xx  
80.7  
67.9  
55.8  
48.7  
50.8  
43.5  
37  
17.2  
11.4  
13.3  
12.2  
43  
33.4  
33  
15.4  
15.4  
14  
30  
48.5  
40.9  
35  
46.6  
33.8  
32.9  
29.4  
25.2  
21.9  
20.4  
32.8  
29.7  
12.7  
31.3  
Figures in the above table may differ slightly depending on the installation.  
GB  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
WARNING  
The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of  
the TV. Refer to “Specifications” (page 34) for its weight.  
Screw and Hook locations diagram/table  
KDL-32S55xx  
Model Name  
Screw location  
Hook location  
KDL-32S55xx  
e, g  
c
* Hook position “a” and “b” cannot be used for the model in the table above.  
Screw location  
Hook location  
a*  
b*  
c
KDL-26S55xx/KDL-22S55xx/KDL-19S55xx  
a
Model Name  
KDL-26S55xx  
KDL-22S55xx/KDL-19S55xx  
Hook location  
b
a
b
GB  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Specifications  
Model name  
KDL-32S55xx  
KDL-26S55xx  
KDL-22S55xx  
KDL-19S55xx  
System  
LCD (Liquid Crystal Display) Panel  
Panel System  
TV System  
Depending on your country/region selection  
Analogue: B/G/H, D/K, L, I  
Digital: DVB-T  
Analogue: PAL, SECAM, NTSC 3.58, 4.43 (only Video In)  
Digital: MPEG-2 MP@ML  
Colour/Video System  
Channel Coverage  
Analogue:48.25 - 855.25 MHz  
Digital: VHF Band III (177.5 - 226.5 MHz)/UHF E21 - E69 (474 - 858 MHz)  
10 W + 10 W (RMS)  
8 W + 8 W (RMS)  
5 W + 5 W (RMS)  
Sound Output  
Input/Output jacks  
Aerial  
75 ohm external terminal for VHF/UHF  
1
21-pin scart connector including audio/video input, RGB input, S-Video input, and Analogue TV  
audio/video output.  
/
/
AV1*  
2
21-pin scart connector including audio/video input, RGB input, S-Video input, and audio/video output.  
/
/
AV2*  
Supported formats: 1080i, 720p, 576p, 576i, 480p, 480i  
Y: 1 Vp-p, 75 ohms, 0.3V negative sync/PB/CB: 0.7 Vp-p, 75 ohms/  
PR/CR: 0.7 Vp-p, 75 ohms  
COMPONENT IN  
Audio input (phono jacks)  
COMPONENT IN  
4
Video: 1080i, 720p, 576p, 576i, 480p, 480i  
Audio: Two channel linear PCM  
HDMI IN 1, 2, 3*  
32, 44.1 and 48 kHz, 16, 20 and 24 bits  
Analogue audio (minijack) (HDMI2 only) (KDL-32S55xx, KDL-26S55xx)  
Analogue audio (minijack) (HDMI1 only) (KDL-22S55xx, KDL-19S55xx)  
Video input (phono jack)  
AV3  
AV3  
Audio input (phono jacks)  
Audio output (Left/Right) (phono jacks)  
PC Input (15 Dsub) (see page 35)  
PC IN  
G: 0.7 Vp-p, 75 ohms, non Sync on Green/B: 0.7 Vp-p, 75 ohms/  
R: 0.7 Vp-p, 75 ohms, H/V Sync: TTL level  
PC audio input (minijack)  
Headphones jack  
i
USB port  
CAM (Conditional Access Module) slot  
Power and others  
Power Requirements  
Screen Size  
220–240 V AC, 50 Hz  
32 inches  
(Approx. 80.0 cm  
measured diagonally)  
26 inches  
(Approx. 66.1 cm  
measured diagonally)  
22 inches  
(Approx. 54.8 cm  
measured diagonally)  
19 inches  
(Approx. 47.0 cm  
measured diagonally)  
1,366 dots (horizontal) × 768 lines (vertical)  
Display Resolution  
Power Consumption  
135 W  
110 W  
60 W  
55 W  
3
0.5 W or less  
0.5 W or less  
1 W or less  
1 W or less  
Standby Power Consumption*  
Approx. 80.7 × 55.7 × Approx. 67.9 × 48.5 × Approx. 55.8 × 41.7 × Approx. 48.7 × 37.5 ×  
Dimensions  
(w × h × d)  
(with stand)  
22.2 cm  
22.2 cm  
21.5 cm  
21.5 cm  
Approx. 80.7 × 50.8 × Approx. 67.9 × 43.5 × Approx. 55.8 × 37 ×  
Approx. 48.7 × 32.8 ×  
7.9 cm  
(without stand)  
9.4 cm  
9.3 cm  
7.9 cm  
Approx. 12.7 kg  
Approx. 10.0 kg  
Approx. 6.9 kg  
Approx. 5.8 kg  
Approx. 5.0 kg  
Mass  
(with stand)  
Approx. 11.4 kg  
Approx. 8.7 kg  
Approx. 6.1 kg  
(without stand)  
See “Installing the Accessories (Wall-Mount Bracket)” on page 31.  
Supplied Accessories  
Optional Accessories  
*1 AV1 outputs available only for analogue TV.  
*2 AV2 outputs watching screen (except PC, HDMI, Component 1080i).  
*3 Specified standby power is reached after the TV finishes necessary internal processes.  
*4 HDMI3 is available only for KDL-32S55xx, KDL-26S55xx.  
Design and specifications are subject to change without notice.  
GB  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
PC Input Signal Reference Chart for PC IN  
, HDMI IN 1, 2 and 3*  
Horizontal  
Vertical  
Signals Horizontal (Pixel) Vertical (Line) frequency  
(kHz)  
Standard  
frequency (Hz)  
VGA  
640  
800  
480  
600  
768  
768  
768  
768  
31.5  
37.9  
48.4  
47.4  
47.8  
47.7  
60  
60  
60  
60  
60  
60  
VGA  
VESA Guidelines  
VESA Guidelines  
VESA  
SVGA  
XGA  
1024  
1280  
1280  
1360  
WXGA  
WXGA  
WXGA  
VESA  
VESA  
This TV’s PC input does not support Sync on Green or Composite Sync.  
This TV’s PC input does not support interlaced signals.  
This TV’s PC input supports signals in the above chart with a 60 Hz vertical frequency.  
* HDMI3 is available only for KDL-32S55xx, KDL-26S55xx.  
GB  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Some tiny black points and/or bright points  
appear on the screen  
The picture of a display unit is composed of pixels. Tiny  
black points and/or bright points (pixels) on the screen  
do not indicate a malfunction.  
Troubleshooting  
Check whether the 1 (standby) indicator is  
flashing in red.  
No colour on programmes  
Select “Reset” (page 25).  
No colour or irregular colour when viewing a  
signal from the COMPONENT IN sockets  
When it is flashing  
The self-diagnosis function is activated.  
Press 1 on the side of the TV to turn it off,  
disconnect the mains lead, and inform your dealer or  
Sony service centre.  
Check the connection of the  
COMPONENT IN  
sockets and check if each sockets are firmly seated in  
their respective sockets.  
Sound  
When it is not flashing  
1
2
Check the items in the tables below.  
If the problem still persists, have your TV  
serviced by qualified service personnel.  
No sound, but good picture  
Press 2 + or % (Mute).  
Check if the “Speaker” is set to “TV Speaker” (page 25).  
Picture  
Channels  
No picture (screen is dark) and no sound  
The desired channel cannot be selected  
Check the aerial connection.  
Connect the TV to the mains, and press 1 on the side of  
the TV.  
Switch between digital and analogue mode and select  
the desired digital/analogue channel.  
If the 1 (standby) indicator lights up in red, press "/1.  
Some channels are blank  
Scrambled/Subscription only channel. Subscribe to the  
pay TV service.  
Channel is used only for data (no picture or sound).  
Contact the broadcaster for transmission details.  
No picture or no menu information from  
equipment connected to the scart connector  
Press  
to display the connected equipment list, then  
select the desired input.  
Check the connection between the optional equipment  
and the TV.  
Digital channels are not displayed  
Contact a local installer to find out if digital  
transmissions are provided in your area.  
Upgrade to a higher gain aerial.  
Double images or ghosting  
Check the aerial connection.  
Check the aerial location and direction.  
Only snow and noise appear on the screen  
General  
Check if the aerial is broken or bent.  
The TV turns off automatically (the TV enters  
standby mode)  
Check if the aerial has reached the end of its serviceable  
life (three to five years in normal use, one to two years  
at the seaside).  
Check if the “Sleep Timer” (page 26) or “Idle TV  
Standby” (page 26) is activated.  
Distorted picture (dotted lines or stripes)  
If no signal is received and no operation is performed in  
the TV mode for 15 minutes, the TV automatically  
switches to standby mode.  
Keep the TV away from electrical noise sources such as  
cars, motorcycles, hair-dryers or optical equipment.  
When installing optional equipment, leave some space  
between the optional equipment and the TV.  
Check the aerial connection.  
The remote does not function  
Replace the batteries.  
Keep the aerial cable away from other connecting  
cables.  
HDMI equipment does not appear on “HDMI  
Device List”  
Check that your equipment is compatible with control  
for HDMI.  
Picture or sound noise when viewing a TV  
channel  
Adjust “AFT” (Automatic Fine Tuning) to obtain better  
picture reception (page 28).  
If “Store Display Mode: On” is displayed on the  
screen  
Your TV is set to “Shop” mode. You need to set “Home”  
for “Location” in the “Auto Start-up” procedure again  
GB  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
GB  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
2
3
4
5
6
7
8
Press “MENU” on the remote.  
Press F/f to select “Settings”, then press  
Press F/f to select “Set-up”, then press  
.
.
Press F/f to select “Digital Set-up”, then press  
.
Press F/f to select “Digital Tuning” and then press  
Press F/f to select “Digital Auto Tuning” and then press  
Press to start “Digital Auto Tuning”.  
Follow the on screen instructions.  
.
.
GB  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instructions on “Installing the Wall-Mount Bracket” are not supplied  
in the form of a separate leaflet with this TV. These installation  
instructions are included within this TV’s instructions manual.  
For useful information about Sony products  
Printed in Hungary  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sennheiser Work Light 830S User Manual
Snapper Snow Blower I85245E User Manual
Sony Camera Lens VCLHG1758 User Manual
Sony Portable Speaker SRS Z1000PC User Manual
Speed Queen Clothes Dryer BE 3113 User Manual
Sunbeam Water Dispenser WF6800 User Manual
Sunfire Portable Speaker High Resolution Series User Manual
SVA Security Camera CRR 1104H User Manual
Swann Home Security System ADW 300 X User Manual
Talk electronic CD Player Thunder 31B User Manual