3-300-208-12 (2)
Digital Photo
Frame
DPF-V900/V700
Operating Instructions
Before operating this unit, please read this manual thoroughly and
retain it for future reference.
Owner’s Record
The model and serial numbers are located at the rear.
Record the serial number in the space provided below. Refer to
these numbers whenever you call upon your Sony dealer
regarding this product.
Model No. DPF-V900/V700
Serial No. ________________________
© 2008 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
– If the set does not operate normally when following
the operating instructions. Adjust only those
controls that are specified in the operating
instructions. Improper adjustment of other controls
may result in damage and will often require
extensive work by a qualified technician to restore
the set to normal operation.
Installation
Water and Moisture
Do not use power-line operated sets near water – for
example, near a bathtub, washbowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming
pool, etc.
– When the set exhibits a distinct change in
performance – this indicates a need for service.
Power-Cord Protection
Route the power cord so that it is not likely to be
walked on or pinched by items placed upon or against
them, paying particular attention to the plugs,
receptacles, and the point where the cord exits from
the appliance.
Servicing
Do not attempt to service the set yourself as opening
or removing covers may expose you to dangerous
voltage or other hazards.
Refer all servicing to qualified service personnel.
Accessories
Replacement parts
Do not place the set on an unstable cart, stand, tripod,
bracket, or table. The set may fall, causing serious
injury to a child or an adult, and serious damage to the
set. Use only a cart, stand, tripod, bracket, or table
recommended by the manufacturer.
When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer that have the same
characteristics as the original parts.
Unauthorized substitutions may result in fire, electric
shock, or other hazards.
Ventilation
The slots and openings in the cabinet are provided for
necessary ventilation. To ensure reliable operation of
the set, and to protect it from overheating, these slots
and openings must never be blocked or covered.
– Never cover the slots and openings with a cloth or
other materials.
Safety Check
Upon completion of any service or repairs to the set,
ask the service technician to perform routine safety
checks (as specified by the manufacturer) to
determine that the set is in safe operating condition.
– Never block the slots and openings by placing the
set on a bed, sofa, rug, or other similar surface.
– Never place the set in a confined space, such as a
bookcase, or built-in cabinet, unless proper
ventilation is provided.
– Do not place the set near or over a radiator or heat
register, or where it is exposed to direct sunlight.
Lightning
For added protection for this set during a lightning
storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet
and disconnect the antenna or cable system. This will
prevent damage to the set due to lightning and power-
line surges.
Service
Damage Requiring Service
Unplug the set from the wall outlet and refer servicing
to qualified service personnel under the following
conditions:
– When the power cord or plug is damaged or frayed.
– If liquid has been spilled or objects have fallen into
the set.
– If the set has been exposed to rain or water.
– If the set has been subject to excessive shock by
being dropped, or the cabinet has been damaged.
Continued
3 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Declaration of Conformity
WARNING
Trade Name:
SONY
Model No.:
Responsible Party: Sony Electronics Inc.
Address:
DPF-V700
Do not expose the batteries to
excessive heat such as sunshine, fire
or the like.
16530 Via Esprillo, San Diego,
CA 92127 U.S.A.
Telephone No.:
858-942-2230
CAUTION
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Replace the battery with the specified
type only. Otherwise, fire or injury
may result.
For the customers in the U.S.A.
CAUTION
For the State of California, USA
only
Perchlorate Material - special handling may apply,
See
You are cautioned that any changes or modifications
not expressly approved in this manual could void
your authority to operate this equipment.
If you have any questions about this product, you may
call:
Sony Customer Information Services Center
1-800-222-SONY (7669)
Perchlorate Material: Lithium battery contains
perchlorate.
The number below is for the FCC related matters
only.
Note:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules.
Regulatory Information
Declaration of Conformity
These limits are designed to provide reasonable
protection against harmful interference in a
Trade Name:
SONY
residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by
one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and
receiver.
Model No.:
Responsible Party: Sony Electronics Inc.
Address:
DPF-V900
16530 Via Esprillo, San Diego,
CA 92127 U.S.A.
858-942-2230
Telephone No.:
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV
technician for help.
“Lamp in this product contains mercury. Disposal of
these materials may be regulated due to
environmental considerations. For disposal or
recycling information, please contact your local
authorities or the Electoronic Industries Alliance
(www.eiae.org).”
4 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
require a permanent connection with an incorporated
battery, this battery should be replaced by qualified
service staff only. To ensure that the battery will be
treated properly, hand over the product at end-of-life
to the applicable collection point for the recycling of
electrical and electronic equipment. For all other
batteries, please view the section on how to remove
the battery from the product safely. Hand the battery
over to the applicable collection point for the
recycling of waste batteries.
For the Customer in Europe
This product has been tested and found compliant
with the limits set out in the EMC Directive for using
connection cables shorter than 3 meters (9.8 feet).
Attention
The electromagnetic fields at the specific frequencies
may influence the picture of this digital photo frame.
Notice
For more detailed information about recycling of this
product or battery, please contact your local Civic
Office, your household waste disposal service or the
shop where you purchased the product.
If static electricity or electromagnetism causes data
transfer to discontinue midway (fail), restart the
application or disconnect and connect the
communication cable (USB, etc) again.
Notice for the customers in the
countries applying EU Directives
Disposal of Old Electrical &
Electronic Equipment (Applicable in
the European Union and other
European countries with separate
collection systems)
The manufacturer of this product is Sony
Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-
0075 Japan. The Authorized Representative for EMC
and product safety is Sony Deutschland GmbH,
Hedelfinger Strasse 61, 70327 Stuttgart, Germany.
For any service or guarantee matters please refer to
the addresses given in separate service or guarantee
documents.
This symbol on the product
or on its packaging indicates
that this product shall not be
treated as household waste.
Instead it shall be handed
over to the applicable
collection point for the
recycling of electrical and
electronic equipment. By
ensuring this product is
disposed of correctly, you
will help prevent potential
NOTICE FOR CUSTOMERS IN
THE UNITED KINGDOM
A moulded plug complying with BS 1363 is fitted to
this equipment for your safety and convenience.
Should the fuse in the plug supplied need to be
replaced, a fuse of the same rating as the supplied one
and approved by ASTA or BSI to BS 1362,
negative consequences for
(i.e.marked with
or mark) must be used.
the environment and human health, which could
otherwise be caused by inappropriate waste handling
of this product. The recycling of materials will help to
conserve natural resources. For more detailed
information about recycling of this product, please
contact your local Civic Office, your household waste
disposal service or the shop where you purchased the
product.
If the plug supplied with this equipment has a
detachable fuse cover, be sure to attach the fuse cover
after you change the fuse. Never use the plug without
the fuse cover. If you should lose the fuse cover,
please contact your nearest Sony service station.
Duplication, edition, or printing of a CD, TV
programs, copyrighted materials such as pictures or
publications, or any other materials except for your
own recording or creation is limited to private or
domestic use only. Unless you hold copyright or
have permission of copyright holders for the
materials to be duplicated, use of those materials
beyond this limit may infringe the provisions of the
copyright law and be subject to the copyright
holders claim for damages.
Disposal of waste batteries
(applicable in the European Union
and other European countries with
separate collection systems)
This symbol on the battery or on the
packaging indicates that the battery
provided with this product shall not
When using photo images with this digital photo
frame, pay special attention not to infringe the
provisions of the copyright law. Any unauthorized
use or modification of there’s portrait may also
infringe their rights.
be treated as household waste. By
ensuring these batteries are disposed
of correctly, you will help prevent
potentially negative consequences for
the environment and human health which could
otherwise be caused by inappropriate waste handling
of the battery. The recycling of the materials will help
to conserve natural resources. In case of products that
for safety, performance or data integrity reasons
For some demonstrations, performances, or
exhibits, photography may be forbidden.
Continued
5 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
• HDMI,
, and High-Definition Multimedia
Backup recommendations
Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
• Microsoft, Windows, and Windows Vista are either
registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other
countries.
• Macintosh and Mac OS are registered trademarks of
Apple Inc. in the United States and/or other
countries.
• Intel and Pentium are the registered trademarks or
trademarks of Intel Corporation.
To avoid potential risk of data loss caused by
accidental operation or malfunction of the digital
photo frame, we recommend that you save a
backup copy of your data.
Information
IN NO EVENT SHALL SELLER BE LIABLE
FOR ANY DIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OF ANY
NATURE, OR LOSSES OR EXPENSES
RESULTING FROM ANY DEFECTIVE
PRODUCT OR THE USE OF ANY PRODUCT.
• CompactFlash is a trademark of SanDisk
Corporation in the U.S.A.
Sony shall assume no responsibility for any
accidental or consequential damages or loss of the
recording contents which may be caused by use or
malfunction of the digital photo frame or memory
card.
•
or xD-Picture Card™ is a trademark of
FUJIFILM Corporation.
•
•
is a trademark of FotoNation Inc. in the
is a trademark of Ichikawa Soft
U.S.A.
Notes on LCD screen
Laboratory.
• The displayed image on the screen is not identical in
picture quality and colors with the printed image
because phosphor methods or profiles differ. Please
regard the displayed image as just a reference.
• Do not press against the LCD screen. The screen
may be discolored and that may cause a
malfunction.
• Contains bitmap fonts from Monotype Imaging Inc.
• All other companies and product names mentioned
herein may be the trademarks or registered
trademarks of their respective companies.
Furthermore, “™” and “®” are not mentioned in
each case in this manual.
• Exposing the LCD screen to direct sunlight for long
periods may cause malfunctions.
• This unit is equipped with face recognition feature.
Sony Face Recognition technology developed by
Sony is used.
• The Bluetooth word mark and logos are owned by
the Bluetooth SIG, Inc. and any use of such marks
by Sony Corpration is under licence. Other
trademarks and trade names are those of their
resective owners.
• The LCD screen is manufactured using extremely
high-precision technology, so over 99.99% of the
pixels are operational for effective use. However,
there may be some tiny black points and/or bright
points (white, red, blue or green in color) that
constantly appear on the LCD screen. These points
are normal in the manufacturing process and do not
affect the printing in any way.
• Images may trail across on the LCD screen in a cold
location. This is not a malfunction.
On trademarks and copyrights
•
, BRAVIA, BRAVIA Sync,
,
“PhotoTV HD”,
Stick”,
, Cyber-shot, , “Memory
, “Memory Stick Duo”,
, “MagicGate Memory
Stick”, “Memory Stick PRO”,
, “Memory Stick PRO Duo”,
, “Memory Stick PRO-HG
, “Memory Stick
Duo”,
Micro”,
ROM”,
,
, “Memory Stick-
, “MagicGate”, and
are trademarks or registered
trademarks of Sony Corporation.
6 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notice for users
Program © 2008 Sony Corporation
Documentation © 2008 Sony Corporation
All rights reserved. This manual or the software
described herein, in whole or in part, may not be
reproduced, translated or reduced to any machine
readable form without prior written approval from
Sony Corporation.
IN NO EVENT SHALL SONY CORPORATION BE
LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES,
WHETHER BASED ON TORT, CONTACT, OR
OTHERWISE, ARISING OUT OF OR IN
CONNECTION WITH THIS MANUAL, THE
SOFTWARE OR OTHER INFORMATION
CONTAINED HEREIN OR THE USE THEREOF.
By breaking the seal of the envelope of the CD-ROM
package, you accept all the terms and conditions of
this agreement. If you do not accept these terms and
conditions, please return this disk envelope unopened,
along with the rest of the package, immediately to the
dealer where you obtained it.
Sony Corporation reserves the right to make any
modification to this manual or the information
contained herein at any time without notice.
The software described herein may also be governed
by the terms of a separate user license agreement.
Any design data such as sample pictures provided in
this software cannot be modified or duplicated except
for the purpose of personal use. Any unauthorized
duplication of this software is prohibited under
copyright law.
Please note that unauthorized duplication or
modification of portraits or copyrighted work could
infringe the rights reserved by rights holders.
On the illustrations and screen
shots used in this manual
The illustrations and screen shots used in this
manual are of the DPF-V900 unless noted
otherwise.
7 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a high definition TV to
Table of Contents
Enjoy your photo frame in various
Connecting to a high definition
Transferring images from an external
Connecting to the AC power
Connecting to a computer to exchange
Inserting a memory card and viewing
Adjusting the image size and
8 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
9 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Before operation
Enjoy your photo frame in various ways
Easy display of images in a memory card or external device such as
a digital camera
Various display functions
In addition to slideshows, you can enjoy various display modes easily including the
Adding important images to an album (saving to the internal memory)
Images added to the album are saved in the internal memory. You can also export
these images to a memory card or external device.
Input to the photo frame
As shown on the left, the photo frame gives
priority in order of computer, external device,
and memory card if computer and memory
cards are connected/inserted to the photo
frame. If multiple memory cards are inserted,
the images of the memory card you inserted
first are displayed.
10 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying images on a large TV screen
If you connect the photo frame to a TV with an HDMI cable, you can enjoy
slideshows and single image display on a large screen.
Various devices you can use
Connecting to your computer
Images can be copied from a computer easily.
You can also save images in the album to a
computer as a backup. Images can also be
exchanged with a memory card, USB memory,
etc. and copied from a Bluetooth compatible
device.
11 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
xVarious display functions
You can enjoy various view modes, such as
displaying an analog clock, digital clock or
calendar. And the photo frame can display
images on single image display, index image
display, zoom in/zoom out or fit to screen
mode.
xAutomatic rotation of images
The photo frame automatically rotates
images to their proper orientation. Images
are also automatically rotated when the
photo frame is set in either the portrait or
landscape position.
xEasy operation by remote control
xAdding images to internal memory
The images you add to the album are saved
to internal memory.
xExporting images
You can export images in the album to your
memory card.
Features
The Sony DPF-V900/V700 is a digital photo
frame for easily displaying images taken with a
digital camera or other device without using a
computer.
xSupport for various memory cards
Supports various memory cards used by
digital cameras and other devices, such as a
“Memory Stick”, CompactFlash card, SD
memory card, and xD-Picture Card™. Just
insert a memory card removed from a digital
camera or other device, then you will be able
to view the images immediately.
xEasy transfer of images taken with a
Bluetooth compatible mobile phone
or other device
You can transfer images to the photo frame’s
internal memory from a Bluetooth
compatible device via a Bluetooth adaptor
(optional).
xAUTO TOUCH-UP features
You can enjoy beautiful images by
automatic corrections of backlight, focus,
red-eye, and skin smoothing.
xConnecting to a computer to
exchange the images
xSupport for mass storage compatible
devices
xConnecting to a high definition TV to
display images on a large screen
Using the photo frame’s HDMI output
connector, you can enjoy the images in a
memory card, external device, or internal
memory on a large screen.
xVarious modes
The displayed image can be switched
automatically as though you are turning the
pages of an album yourself. You can select
from various modes including just images,
clock, and calendar view. You can also
change playback settings such as the display
order.
12 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking included
items
Identifying the parts
For details, see the pages indicated in the
parentheses.
Make sure that the following items are
included.
The illustrations are of the DPF-V900. The
locations and names of buttons and connectors
of the DPF-V700 are identical to those of the
DPF-V900, although the LCD screen size is
different.
• Digital photo frame (1)
• Remote control (1)
• AC adaptor (1)
• AC power cord (1)
• Operating Instructions (this manual) (1)
• Warranty (1)
Front
(In some regions, the warranty is not
supplied.)
A LCD screen
B Remote sensor
When using the supplied remote control, point
it at this sensor.
Continued
13 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear
A Connector for USB A/Bluetooth
F VIEW MODE button
H “Memory Stick PRO” (Standard/
I CompactFlash card/Microdrive
You can transfer images wirelessly from a
BLUETOOTH™ compatible mobile phone or
digital camera by connecting a Bluetooth
adaptor (optional: DPPA-BT1).
J 1 (on/standby) button/(standby)
You can also connect a digital camera, USB
memory, or photo storage compatible with
USB mass storage.
indicator
K MENU button
B
USB miniB connector
Displays the menu.
You can use the menu to operate same
functions of buttons on remote control such as
[Slideshow], [Rotate], [Add to album] and
[Clock] from the menu.
Connect a USB cable when you want to use
the photo frame with a computer.
C HDMI OUT (output) connector
Connect an HDMI cable when you want to
view images on a high definition TV.
L Direction (v/V) buttons
These buttons move the cursor.
M
ENTER button
Insert the plug of the supplied AC adaptor to
this jack, and connect the AC power cord to
the AC adaptor and the wall outlet.
N Reset switch
O SD memory card/MMC/xD-Picture
14 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
A VIEW MODE button
B
C
(clock) button
(slideshow) button
D MENU button
E BACK button
F 1 (on/standby) button
G
H
I
(add to album) button
(zoom in)/ (zoom out) buttons
(index) button
This button switches from the image preview
screen to index view screen.
J Direction (B/b/v/V) buttons
K
(enter) button
L
15 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
Replacing the battery of the
remote control
If the remote control stops working, replace the
battery (CR2025 lithium battery) with a new
one.
Preparing the remote
control
The supplied lithium battery (CR2025) has
already been inserted into the remote control.
Pull out the protective sheet before use as
shown in the figure.
1 Pull out the battery holder.
While pressing in the tab of the battery
holder, pull out the battery holder.
Protective sheet
Using the remote control
Point the top end of the remote control towards
the remote sensor on the photo frame.
2 Remove the old battery from the
battery holder and then insert a new
battery.
Insert the battery so that “+” is facing
upwards.
Remote
sensor
3 Reinsert the battery holder into the
remote control.
WARNING
Battery may explode if mistreated. Do not
recharge, disassemble or dispose of in fire.
Notes
• When the lithium battery becomes weak, the
operating distance of the Remote conrol may
shorten, or the Remote control may not function
properly. In this case, replace the battery with a
Sony CR2025 lithium battery. Use of another
battery may present a risk of fire or explosion.
16 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
• Using a battery other than the specified one may
result in the battery rupturing.
Connecting to the AC
power source
• Dispose of used batteries as specified by the local
authorities.
• Do not leave the remote control in a very hot and
humid place.
• Take care that no foreign objects enter inside the
remote control when you, for example, replace the
battery.
1 Insert the plug of the AC adaptor
into the DC IN 8.4 V jack on the rear
of the photo frame.
• Incorrect use of the battery may cause leaking and
corrosion.
2 Connect the AC power cord to the
AC adaptor and the wall outlet.
– Do not recharge the battery.
– When the remote control will not be used for a
long period of time, remove the battery from the
remote control to prevent leaking and corrosion.
– Incorrectly inserting, shorting, dismantling, or
heating the battery, or throwing it into a fire
may cause the battery to rupture and leak.
About descriptions in this
manual
The operations described in this manual are
based on remote control operation. When an
operation is performed differently with the
remote control and buttons on photo frame, it
will be explained in a tip.
Plug
AC adaptor
To wall outlet
Notes
• A socket outlet should be as close as possible to unit
and easily accessible.
• Do not place the photo frame in an unsteady
location such as on an uneven table or tilted surface.
• Connect the AC adaptor to an easily accessible wall
outlet close by. If trouble occurs while using the
adaptor, immediately shut off the power by
disconnecting the plug from the wall outlet.
• Do not short the plug of the AC adaptor with a
metal object. Doing so may cause a malfunction.
• Do not use the AC Adaptor placed in a narrow
space, such as between a wall and furniture.
• After use, remove the AC adaptor from the
DC IN 8.4 V jack of the photo frame, and remove
the AC power cord from the outlet.
Continued
17 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To use your photo frame abroad
- Power sources
Setting the stand
You can use your photo frame and the AC
Adaptor (supplied) in any country or region
where the power supply is within 100 V to
240 V AC, 50/60 Hz. Use a commercially
available AC plug adaptor [a], if necessary,
depending on the wall outlet (wall socket) [b].
Opening the stand
Set the photo frame with opening the stand as
below.
AC-L200
Do not use an electronics transformer (travel
converter), as this may cause a malfunction.
Setting to portrait or landscape
orientation
You can set the photo frame to portrait or
landscape orientation by rotating it without
moving the stand.
When the photo frame is placed in the portrait
orientation, the image is also automatically
rotated to its proper orientation.
Notes
• Close the stand when you carry the photo frame.
• Check whether the stand is stable. If the stand is not
set properly, the photo frame may fall over.
• When the photo frame is rotated to the portrait
orientation, the menu, image information and index
display are not rotated.
18 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning the photo frame Setting the clock
on
The clock of the photo frame needs to be
adjusted in order to display an accurate time in
the clock and calendar view modes.
Turning on the power
Press 1 (on/standby) on the photo frame or
remote control to turn on the power, and the
standby indicator turns into green from red.
When you power on the first time after
purchase, demo mode will automatically start.
During demo mode, you cannot set up clock.
Please insert memory card with valid picture
data which will disable demo mode. After
disabling demo mode, you can start clock
setting.
1 Press MENU on the remote control.
The menu screen is displayed.
2 Press v/V to select [Various
settings] and then press
to
display the Various settings screen.
3 Press
v
/V to select [Date/time
settings] and then press
.
The Date/time settings screen is displayed.
Note
• The standby indicator lights red, when you connect
the AC adaptor to the photo frame.
Turning off the power
Hold 1 (on/standby) on the photo frame or
remote control until turning off the power. The
standby indicator turns into red from green.
4 Select the format of the date.
1Press v/V to select [Date Display Order]
Note
• Do not disconnect the AC adaptor from the photo
frame before the standby indicator turns into red.
Doing so may damage the photo frame.
and then press
2Press v/V to select a format and then
press
.
.
• Y/M/D
• M/D/Y
• D/M/Y
5
Adjust the date.
1Press v/V to select [Date] and then
press
.
Continued
19 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
2Press v/V to select a value and then
press
.
Inserting a memory card
and viewing images
6
Adjust the time.
1Press v/V to select [Time] and then
press
2Press v/V to select a value and then
press
.
This section describes inserting a memory card
and general operations for displaying images in
a slideshow.
.
Set the time in the order of hour,
minute, and second.
Inserting a memory card
7 Set the day to start the week for the
calendar.
Insert a memory card firmly into the
corresponding slot with its label side facing
toward you (when taking your position on the
rear side of the photo frame).
You can set the day that appears on the
very left when the calendar is displayed.
1Press v/V to select [First Weekday] and
then press
2Press v/V to select [Sunday] or
[Monday] and then press
.
For details on the memory cards you can use
.
Access lamp
8 Press MENU.
The menu screen is closed.
Insert a memory card firmly into the
corresponding slot with its label side facing
toward you. The slot order from the top is
“Memory Stick” (“Memory Stick Duo”),
CompactFlash card, SD memory card and xD-
Picture Card.
To remove a memory card
Remove a memory card from a slot in the opposite
direction from which it was inserted.
20 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
• When inserting the memory card, it will only insert
the portion of the way, so do not try to force it as
this could damage the memory card and/or photo
frame.
• This photo frame has “Memory Stick” standard and
Duo size compatible slot, so you do not need a
Memory Stick adaptor.
• The SD memory card/xD-Picture Card dual-
purpose slot automatically detects the card type.
Display priority of images
If a memory card is inserted or external device is
connected, the images of the inserted memory card or
connected device are displayed automatically. To
manually change the memory card or external device
to be displayed, specify it in the [Select device] menu
The photo frame displays the images of the
memory card in the following priorities.
• If a device is connected to the USB A connector
of the photo frame, the images in the connected
device always take priority and are displayed. To
display the images in the memory card first,
disconnect the device from the USB A connector or
change the setting in the [Select device] menu.
• If multiple memory cards are inserted when the
photo frame is turned on, the images of the first
memory card you inserted take priority and are
displayed.
• If multiple memory cards are inserted during the
photo frame is turned off, the priority order for
display is as follows.
“Memory Stick” b CompactFlash card
b SD memory card/xD-Picture Card
• If no memory card is inserted and no device is
connected, the images saved to the album in the
internal memory are displayed.
Continued
21 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying images
x Overview of display
You can press the buttons on the remote control
to switch the display.*
Clock display
Slideshow display
Single image display
Index image display
Tips*
• If the power is on and no memory card is inserted
and no device is connected, the images in internal
memory are displayed. If no images are saved to
internal memory, demonstration mode starts
automatically. Demonstration mode ends, if a
memory card is inserted.
• The display mode stays unchanged once you turn
the photo frame off and on again.
22 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock view mode
x Slideshow display
Images in a memory card are automatically
Displays images with shooting date and time.
displayed one after another.
To start the slideshow
• To start a slideshow from single image,
clock, or index image display, press
(slideshow).
Tip
To perform this operation from the photo frame, press
ENTER on the single image display mode.
Calendar view mode
There are several slideshow modes. Pressing
VIEW MODE changes the modes in the
following order.
Displays images one after another while
showing a calendar.
Tip
You can set the interval on the single view and
calendar view mode in the [Slideshow Settings] menu
the effect and order in this menu.
Single view mode
Images are displayed in a single screen one
after another with the effect selected in the
[Slideshow Settings] menu.
Random view mode
Displays images while randomly switching
between the above four slideshow patterns.
Multiple image mode
Displays multiple images at same time.
Continued
23 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Fit to screen mode
x Single image display
Displays an image over the whole screen.
To display an image you want to display
You can switch the images to display by
pressing B/b.
• During a slideshow, press
you want to display.
at an image
• In the index image display, press B/b/v/V to
select an image you want to display and then
press
. You can also press (zoom in).
Tip
To perform this operation from the photo frame, press
ENTER at an image you want to display during a
slideshow. In the index image display, press the
direction buttons to select an image and then press
ENTER.
Image information mode
Displays image information such as the image
number, file name, and shooting date.
Pressing VIEW MODE changes the modes in
the following order.
You can switch the images to display by
pressing B/b.
Tip
You can set the image display mode except image
information mode with [Display Mode] in the
able to be [Fit to screen].
Entire image mode
Displays an entire image in the screen.
You can switch the images to display by
pressing B/b.
The following information is displayed.
• Input/setting indications
Input indications and settings information
for an image are displayed.
Icons
Meaning
“Memory Stick” input
SD Memory Card input
CompactFlash input
xD-Picture Card input
External Device input
Internal memory input
Protect indication
24 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
You can select an image by pressing B/b/v/V.
Icons
Meaning
Associated file indication
(Displayed when there is an
associated file such as a motion
file or a miniature e-mail image
file.)
• Image display order/Total number of images
• Image number (folder-file number)
This is displayed if the image is DCF
compliant.
Large thumbnail mode
• Shooting date
• Image details
Displays a list of large thumbnails (3 rows × 4
columns).
– File format (JPEG, BMP, TIFF, RAW)
– Number of pixels (width × height)
– Manufacturer name of image input device
– Model name of image input device
– Shutter speed (e.g.: 1/8)
You can select an image by pressing B/b/v/V.
– Aperture value (e.g.: F2.8)
– Exposure value (e.g.: +0.0EV)
x Index image display
The list of images in the selected memory card,
internal memory or external device is
displayed.
Notes
• In the index image display, images will not be
automatically rotated when the photo frame is set to
the portrait orientation.
To show the index image display from a
slideshow, clock, or single image
display
• During TV output, the number of images displayed
on the screen varies depending on your TV’s screen
size.
Press
(index). You can also press (zoom
out) from the single image display.
Tip
x Clock display
Displays a clock or calendar. No image is
displayed.
To perform this operation from the photo frame,
select the index image display in the menu on the
single image display.
To display the clock display from
slideshow, single image, or index image
display
Press VIEW MODE to switch the modes of the
index image display.
Press
(clock) on the remote control.
Small thumbnail mode
Displays a list of small thumbnails (5 rows × 6
columns).
Tip
To perform this operation from the photo frame,
select the clock display in the menu on the single
image display.
Continued
25 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Press VIEW MODE to switch the modes of the
clock display.
Analog clock mode
Displays the time on analog clock.
Digital clock mode
Displays the date and time on digital clock.
Calendar mode
Displays a calendar for the current month. You
can press v/V to display a calendar for the
previous or next month. You can also set the
first day of the week for the calendar in the
[Date/time settings] menu.
Tip
There are black and white background types for each
of analogue clock, digital clock and calendar mode.
26 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
4 Press v/V to select [Save] and then
press
.
AUTO TOUCH-UP
The corrected image is saved as a new
image.
What is AUTO TOUCH-UP?
To return to the original image
(image before correction)
AUTO TOUCH-UP is a feature for performing
the following four corrections automatically at
the same time. It is not possible to adjust the
level for each of the corrections manually.
Select [Cancel] and then press
.
Tips
Skin smoothing: Automatically recognizes face
parts, and adjusts the skin tone for a smoother look.
• The original image is the same as it was before
correction.
Backlight correction: Adjusts the brightness by
using the face detect function.
• The corrected image is saved in the same device as
the image before correction.
Focus correction: Improves the focus of an out-of-
focus image to create a better-focused image.
• To perform this operation from the photo frame,
press MENU, press the direction buttons to select
Red-eye correction: Automatically detects faces and
corrects red-eye caused by the flash.
the item, and then press
ENTER.
Notes
1 Display the image you want to
• Depending on the image, it may take a while for the
correction.
correct as single image display.
• Depending on the image, the faces of people may
not be able to be detected automatically.
2 Press MENU.
The menu is displayed.
• Depending on the image, focus correction may not
be able to be performed properly. Focus correction
is not effective for blurring caused by shaking of the
camera.
• Depending on the image, red-eye correction may
not be possible.
The automatic red-eye correction of
this photo frame uses the technology
of FotoNation Inc. in the U.S.A.
3 Press v/V to select [AUTO TOUCH-
UP] and then press
.
Correction of the selected image begins
and then the image before correction
appears on the left and the corrected
image appears on the right.
The skin smoothing correction of the photo frame
uses the technology of Ichikawa Soft Laboratory.
27 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifying the playback Adjusting the image size
device
and position
You can specify the memory card or external
device to be displayed.
Enlarging an image
1 To enlarge an image, press
(zoom in) on the remote control. To
reduce an enlarged image, press
(zoom out).
1 Press MENU.
The menu is displayed.
2 Press v/V to select [Select device]
and then press
.
Each press of the button enlarges the
image further. You can enlarge an image
to maximum 5 times the original scale.
You can move an enlarged image up,
down, left, and right.
The screen for selecting a device is
displayed.
Notes
• Enlarging an image may reduce the quality
depending on the image size.
• It is not possible to enlarge an image with buttons
on the photo frame.
Rotating an image
Tip
Insert the device at this procedure if no device is
inserted.
1 Press
(rotation) on the remote
control.
3 Press v/V to select the device you
Each press of the button rotates the image
90 degrees counter-clockwise.
want to display and then press
The images of the selected device are
displayed.
.
To perform the operation from
the menu of the remote control
Tip
To perform this operation from the photo frame, press
MENU, press the direction buttons to select the
device you want to display, and then press
ENTER.
1 Press MENU.
The menu is displayed.
28 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Press v/V to select [Rotate] and
then press
.
Adding to the internal
memory
The Rotate menu is displayed.
You can use the photo frame as the digital
album with saving important images in the
internal memory.
Tip
In [Image file size] of the menu, you can preset
whether to optimize the size of images or save images
as is without compressing them when you save them
to the internal memory.
3 Press v/V to select the direction to
rotate and then press
.
•
:
Rotates the image 90 degrees
clockwise.
1 Press
(add to album) on the
remote control.
•
:
The Add to album menu is displayed.
Rotates the image 90 degrees counter-
clockwise.
Single image display
4 Press v/V to select [OK] and then
press
.
Tip
To perform this operation from the photo frame, press
MENU, press the direction buttons to select the item,
and then press
ENTER.
Slideshow display
Continued
29 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Index image display
To cancel the selection, select images to
cancel and then press
check mark.
2Press MENU.
The confirmation screen whether to
save or not to the internal memory is
displayed.
to delete
Tips
•
•
To perform this operation from the menu,
press MENU on remote control, press v/V
to select [Add to album], and then press
.
Images in the internal memory cannot be
added to the album.
4 Press v/V to select [Yes] and then
press
.
2 Press v/V to select [This image],
The image is saved to the internal
memory.
[Selected images] or [All images]
and then press
.
[This image]: Adds the image currently
displayed*.
[Selected images]: Adds the selected
images from the index display.
[All images]: Adds all images in the
device displayed.
[Selected images] shows the images in the
device which are currently displayed as
index view.
If you select [This image] or [All images],
go to step 4 to complete adding the image
to the internal memory.
* You cannot select [This image] on the
slideshow display.
3 If you selected [Selected images],
choose the image you want to add.
1Press B/b/v/V to select the image to
add to the album and then press
Check mark will be placed on each
selected image.
.
Repeat this operation to add multiple
images at the same time.
30 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat this operation to export multiple
images at the same time.
To cancel the selection, select images to
Exporting an image
cancel and then press
check mark.
2Press MENU.
to delete
You can export the images of the internal
memory to a memory card or external device.
The screen for selecting the device to
which to export is displayed.
1 Press MENU.
The menu is displayed.
5 Press v/V to select the device to
2 Press v/V to select [Export] and
which to export the image and then
then press
.
press
.
The Export menu is displayed.
6 The confirmation screen is
3 Press v/V to select [This image],
displayed after exporting is finished,
[Selected images] or [All images]
and then press
.
and then press
.
The image is copied to the specified
[This image]: Exports the image currently
displayed or the image chosen at the index
view.*
device.
Note
[Selected images]: Exports the selected
image from the index display.
Do not turn off the power or remove the memory card
or disconnect the external device during exporting.
Doing so may damage the photo frame or memory
card, or damage the data.
[All images]: Exports all images in the
album.
Selecting [Selected images] shows the
index display of images in the album.
Tip
To perform this operation from the photo frame, press
MENU, press the direction buttons to select the item,
and then press
If you select [This image] or [All images],
go to step 5 to select the device to which
you want to export.
ENTER.
* You cannot select [This image] on the
slideshow display.
4 If you selected [Selected images],
specify the image to export.
1Press B/b/v/V to select the image you
want to export and then press
.
Check mark will be placed on each
selected image.
31 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Format of internal memory
Deleting an image
When you use [Format internal memory] in
[Various settings] menu, you can format the
internal memory.
1 Press MENU.
The menu is displayed.
2 Press v/V to select [Delete] and
then press
.
The Delete menu is displayed.
3 Press v/V to select [This image],
[Selected images] or [All images]
and then press
.
[This image]: Deletes the image currently
displayed.
[Selected images]: Deletes the selected
image from the image list.
[All images]: Deletes all images in the
device displayed.
[Selected images] shows the images in the
device which are currently displayed as
index view.
If you select [This image] or [All images],
go to step 5 to confirm the operation.
4 If you selected [Selected images],
specify the image to delete.
1Press B/b/v/V to select the image to
delete and then press
. Check mark
will be placed on each selected image.
Repeat this operation to delete multiple
images at the same time.
To cancel the selection, select images to
cancel and then press
check mark.
to delete
2Press MENU.
The delete confirmation screen is
displayed.
5 Press v/V to select [Yes] and then
press
.
The image is deleted.
Tip
To perform this operation from the photo frame, press
MENU, press the direction buttons to select the item,
and then press
ENTER.
32 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Press v/V to select the item you
want to change and then press
.
Changing the various
settings
This enables you to set each of the items
(page 34).
Note
Setting procedure
When the photo frame is, for instance,
displaying a slideshow, some items are
unavailable for changing the settings. They are
displayed in gray and cannot be selected.
You can change display, slideshow, brightness,
language, and other settings of the photo frame.
It is also possible to reset the settings to their
factory defaults and format the intenal memory.
5 Press v/V to select a setting value
and then press
.
Each time you press v/V (v/V from the
photo frame), the setting value changes. In
the case of a numerical value, press V to
increase the value and press v to decrease
the value.
Note
Only internal memory can be formatted.
1 Press MENU.
The menu is displayed.
If you press
, the setting is confirmed.
2 Press v/V to select [Various
6 Press MENU.
The menu closes.
settings] and then press
to
display the Various settings screen.
Tips
• To perform this operation from the photo frame,
press MENU, press the direction buttons to select
the item, and then press
• To reset the settings to their factory defaults, select
[Reset] and then press . Adjusted values except
clock setting are reset to default settings.
ENTER.
3 Press v/V to select the item you
want to change and then press
.
The setting screen of the selected item is
displayed.
For example, when [Slideshow Settings]
is selected.
Continued
33 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Items to set
*: Factory default settings
Item
Setting
Description
Slideshow
Settings
Interval
Set a value from 3 sec., 10 sec.*, 30 sec., 1 min., 5 min., 30 min., 1 hour, 3
hours, 12 hours, 24hours for the interval between images when the pattern
is single view or calendar view.
Effect
Center cross
Transitions to the next image as though the previous
image is being pushed from the center to the four
corners.
Vert. blinds
Horiz. blinds
Fade*
Transitions to the next image as though blinds are
being lowered vertically.
Transitions to the next image as though blinds are
being pulled horizontally.
Transitions to the next image by fading out the current
image and fading in the next image.
Wipe
Transitions to the next image as though the current
image is being wiped off the screen to reveal the next
image.
Random
Uses the above five effects randomly.
Order
Shoot. Date*
Displays images in the order of shooting date.
Note
When the number of images exceeds 1,500, the images
cannot be displayed by date. The images are listed in
the order of their file names.
Random
Displays images randomly.
Screen Settings LCD backlight
Brightness
Allows you to set the brightness of the backlight of the LCD screen to a
level from 1 to 10*.
Allows you to set the luminance of images to a level from 1, 2*, 3.
Note
This function is not available when an image is displayed on TV with
HDMI connection.
Display Mode
You can select the view mode for the single image display.
Note
The original image data will not change.
Entire image*
Displays an image in the original horizontal to vertical
ratio with margins on the top, bottom, left and right.
Fit to screen
Zooms in at the center of the image enough to fill the
whole screen.
Auto image
orientation
ON*/OFF: You can set the photo frame to automatically detect and rotate
the orientation of images.
34 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Setting
Description
Screen Settings Auto display
orientation
ON*/OFF: When the photo frame is in portrait orientation, you can set it
to automatically detect and rotate the images to their proper orientation.
General
Settings
Auto power
ON/OFF
Power-ON
timer
You can set the timer (hour/minute) for the power to
turn on automatically. Select [ON] to set [Auto ON
time].
Power-OFF
timer
You can set the timer (hour/minute) for the power to
turn off automatically. Select [ON] to set [Auto OFF
time].
Image file size
Album*
Compresses images and saves them to the internal
memory. You can save more images, but a
deterioration in image quality compared to the original
images is noticeable when the images are displayed on
a large monitor via the HDMI OUT connector.
Original
Saves images to the internal memory without
compressing them. There is no deterioration, but you
can save fewer images.
Control for
HDMI
ON*/OFF: Sets whether to enable or disable the HDMI control functions
such as switching the TV’s input automatically to its video mode so that
the images are displayed, and operating the photo frame with the TV’s
remote control.
Sony logo
ON*/OFF: You can set whether the photo frame’s Sony logo lights or not.
Date/time
settings
Language
setting
Sets the display language on the LCD screen.
Japanese, English*, French, Spanish, German, Italian, Russian, Chinese (Simplified),
Chinese (Traditional), Dutch
Note
Default language setting may vary in some regions.
Reset
Returns all settings to their factory defaults except for date/time setting.
Format internal You can format the internal memory.
memory
Notes
• All the images added to the internal memory will be deleted.
• Do not format the internal memory by using connection to PC or other external devices.
System
Version
Displays the version of the firmware of the photo frame.
Information
Internal
memory
Memory
capacity
Indicates the maximum amount of space available in
internal memory in the initial state.
Remaining
capacity
Indicates the amount of free space currently available
in internal memory.
35 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a high
definition TV to view
images
Connecting to a high
definition TV
The photo frame is capable of HDMI output. If
you connect the photo frame to a TV with an
HDMI input, you can display images in higher
definition on the TV.
High definition TV
To HDMI input
connector
About “PhotoTV HD”
The photo frame supports “PhotoTV HD”.
“PhotoTV HD” is a function for expressing
subtle textures and color tones in high
definition, giving the appearance of real
photos. You can combine Sony devices that
support “PhotoTV HD” together to enjoy
photos at beautiful full HD quality. You can
enjoy beautiful photo quality such as the subtle
portrayal of skin or a flower petal and the
textures of sand and waves on a large screen.
4 Press 1 (on/standby) on the photo
frame to turn on the power.
5 Change the input of the TV.
If the connected TV is compatible with
HDMI control, the TV turns on
automatically when you turn on the photo
frame. Also, the input of the TV is
changed automatically and images from
the photo frame are displayed.
Note
Depending on the original images, high-definition
display may not be possible.
Notes
•
•
Operation is not guaranteed with all TVs.
If you connect a TV, the LCD screen of the
photo frame turns off.
1 Connect the photo frame to the AC
•
If [Control for HDMI] is set to off in the
TV settings, the input is not changed
automatically. The setting method differs
depending on the TV. Refer to the
operating instructions supplied with the
TV.
2 Prepare a commercially available
HDMI cable.
Notes
•
•
Use an HDMI cable that is less than 3
meters long.
•
•
If you are using a TV that does not support
control for HDMI or the input is not
switched automatically, change the TV’s
input manually.
Use an HDMI cable with the HDMI logo.
3 Connect the HDMI OUT connector
(A type connector) of the photo
frame and the HDMI input connector
of the TV.
The method of changing the input differs
depending on the TV. Refer to the
operating instructions supplied with the
TV.
36 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
on the photo frame, or by connecting the
powered-on photo frame to the television. If
a television is on the standby mode, the
television is also turned on.
• You can perform the photo frame operations
using the TV remote control unit.
Using the television remote
control for photo frame
If your television supports the control for
HDMI, you can use the remote control of your
television to operate the photo frame.
• If you switch the language of the TV while
the photo frame and the television is being
connected, you can also change the photo
frame language automatically.
Notes
• We cannot guarantee operations with all types of
televisions.
• When a remote control of your Sony TV is
equipped with a link menu button, you can use the
remote control to operate the photo frame.
Otherwise, you cannot use a TV remote control to
operate the photo frame.
Note
To enable above functions, your television must
support each function.
• To operate the photo frame, the %5$4, [Enter],
[Return] buttons support the HDMI control.
What is “BRAVIA Sync”
• If the HDMI control setting of your television is off,
the television input does not switch automatically.
Settings differ depending on the television you use.
For details, see the manual supplied with your
television.
The “BRAVIA Sync” is a name of a feature of
Sony products that uses the HDMI control
signals and enables you to control linked
operations of a “BRAVIA Sync”-ready product
from a BRAVIA control unit.
• If [Control for HDMI] is set to [OFF], the input will
By connecting the photo frame and a
“BRAVIA Sync”-compatible TV with an
HDMI cable, you can use a BRAVIA control
unit to perform linked operations.
x Basic operations of the photo frame
with a TV remote control
• Press %5$4 on the TV remote control
to select the images on the single image
display.
• Press [Enter] button on the TV remote
control to switch the single image display
and the slideshow display.
Note
With the TV remote control, you cannot do the
following operation:
• Changing the VIEW MODE.
• Setting the MENU function.
• Zooming in/Zooming out
On control for HDMI
When the [Control for HDMI] is set to [ON],
you can use the following operations:
• Turning off the photo frame power together
with the television.
• After the photo frame is connected to the
TV, you can switch the TV input
automatically to the photo frame by turning
37 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Using an external device
Using a Bluetooth
device
Transferring images
from an external device
You can connect a Bluetooth adaptor (optional)
to the USB A connector of the photo frame and
transfer images from a Bluetooth compatible
mobile phone or other device. The transferred
images are saved to internal memory.
You can connect a digital camera, USB
memory, or photo storage with support for
mass storage to the photo frame and transfer
images.
Notes
• Compatibility with all external devices is not
guaranteed.
1 Connect the photo frame to the AC
•
If an external device is connected to the USB A
connector on the photo frame, the photo frame
cannot read the images in card media. Disconnect
an external device, if you need.
2 Press 1 (on/standby) on the photo
frame to turn on the power.
3 Connect the Bluetooth adaptor
(optional) to the USB A connector.
1 Connect the photo frame to the AC
4 Transfer the images to the photo
frame by performing operations from
the mobile phone.
2 Set the digital camera or external
device to mass storage connection
mode.
The setting and operation method before
connecting differ depending on the digital
camera or external device. Refer to the
operating instructions supplied with the
digital camera or external device. (If you
are using a Cyber-shot, set “USB
Connect” to [Normal] or [Mass Storage].)
3 Press 1 (on/standby) on the photo
frame to turn on the power.
4 Connect the digital camera or
external device to the USB A
connector.
Bluetooth
compatible mobile
phone
Use the USB cable supplied with the
digital camera or external device to
connect to the photo frame.
38 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a
computer
You can connect to a computer to view and
copy images of the internal memory of the
photo frame to the computer, and copy images
of the computer to the photo frame.
System requirements
External
To connect a computer to use the picture frame,
your computer must satisfy the following
recommended system requirements.
memory or
other external
device
x Windows
Recommended OS: Microsoft Windows Vista,
Windows XP Service Pack 2 or Windows 2000
Professional Service Pack 4
Notes
•
•
When using a commercially available USB cable,
use an A-Type USB cable that is less than 3 meters
long.
(pre-installed at the time of shipment from the
factory)
Port: USB port
Do not disconnect the USB cable or turn the photo
frame and external device off while the access
lamp on the external device is flashing. Doing so
may damage the data in the external device. Sony
assumes no responsibility for any damage or loss
of data.
x Macintosh
Recommended OS: Mac OS X (10.4) or later
(pre-installed at the time of shipment from the
factory)
•
•
A USB hub or USB device with a built-in USB hub
may not work properly.
Port: USB port
The photo frame cannot use data that has been
encrypted or compressed using, for instance,
fingerprint authentication or a password.
Notes
•
If multiple USB devices are connected to a
computer or if a hub is used, a problem may occur.
In such a case, simplify the connections.
•
•
•
You cannot operate the photo frame from another
USB device being used simultaneously.
Do not disconnect the USB cable during data
communication.
Operation with all computers that satisfy the
recommended system requirements is not
guaranteed.
•
The photo frame has been demonstrated as
operable with connecting to PC or Sony digital
photo printer. When other devices are connected to
the photo frame, these devices may not recognize
the internal memory of the photo frame.
Continued
39 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a computer to
exchange images
Note
When images of the computer are saved to the
internal memory of the photo frame, the image files
are saved without being compressed. As a result,
fewer images may be able to be saved to the internal
memory of the photo frame.
1 Connect the photo frame to the AC
2 Connect the computer and photo
frame with a commercially available
USB cable (optional: VMC-
14UMB2)*.
To USB miniB
connector
Computer
To USB connector
* This cable may not be available in all
countries.
Note
Use a mini B-Type USB cable that is less than 3
meters long.
3 Press 1 (on/standby) on the photo
frame to turn on the power.
4 Exchange images with the internal
memory of the photo frame by
performing operations from the
computer.
40 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Error messages
If an error message appears
If an error occurs, one of the following error messages may be displayed on the LCD screen of the
photo frame. Follow the corresponding solution below to solve the problem.
Error message
Meaning/Solutions
No Memory Stick. / No
• A memory card is not inserted in a slot. Or, an external
device is not connected to the A-Type USB connector.
Insert a memory card in the corresponding slot. Or, connect
CompactFlash card. / No SD
Memory Card. / No xD-Picture
Card. / No External Device.
An incompatible Memory Stick is • An unsupported memory card is inserted. An unsupported
inserted. / An incompatible
CompactFlash card is inserted. / An
incompatible SD Memory Card is
inserted. / An incompatible xD-
Picture Card is inserted. / An
incompatible External Device is
inserted.
external device is connected to the A-Type USB connector.
Use a memory card or external device that is supported by
the photo frame.
No images on file.
• There are no image files in the memory card or external
device. Use a memory card or external device containing
image files that can be displayed with the photo frame.
Cannot delete a protected image.
• To delete a protected file, cancel the protection on your
digital camera.
Media is protected. Remove
protection then try again.
• The memory card is write-protected. Slide the write-
The Memory Stick is full. / The
CompactFlash card is full. / The SD
Memory Card is full. / The xD-
Picture Card is full. / The External
Device is full.
• No more data can be saved because the memory card or
external device is full. Delete images, or use a memory
card or external device with free space.
Error reading the Memory Stick. / • An error has occurred. If this error message is displayed
Error reading the CompactFlash
card. / Error reading the SD
Memory Card. / Error reading the
xD-Picture Card. / Error reading
the External Device.
frequently, check the status of the memory card or external
device with a device other than the photo frame.
• In the case of an external device:
The external device may be write-protected. Cancel the
write-protection setting for the device you are using. The
internal memory of a digital camera may be write-
protected.
Write error in the Memory Stick. /
Write error in the CompactFlash
card. / Write error in the SD
Memory Card. / Write error in the
xD-Picture Card. / Write error in
the External Device.
The Memory Stick is read only.
• A “Memory Stick-ROM” is inserted. To save the images,
Continued
41 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Error message
Meaning/Solutions
The Memory Stick is protected.
• A protected “Memory Stick” is inserted. To edit and save
the images, use an external device to remove protection.
Media format not supported.
Cannot open the image.
• The images cannot be displayed, if the image file is not
supported by the photo frame.
No more USB hubs can be
connected.
• Connect the device directly to the photo frame, or use a
device without a built-in USB hub.
Incompatible USB device. Check
device’s USB settings.
• Connect the device with support for mass storage. If USB
setting of your device is incorrect, set the mass storage
mode in USB setting.
42 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If trouble occurs
Before submitting the photo frame for repair, try using the following guidance to solve the problem.
If the problem persists, consult with your Sony dealer or Sony service facilities.
Power supply
Symptom
The power cannot • Is the power plug inserted
be turned on.
Check item
Cause/Solutions
c Insert the power plug properly.
properly?
Displaying images
If the power is turned on but images are not displayed or the settings of the operation screen cannot
be configured, confirm the following check items.
Symptom
Check item
Cause/Solutions
No images are
displayed on the
screen.
• Is a memory card inserted or c Insert a memory card or connect an
an external device connected
properly?
• Does the memory card
contain images saved with a
digital camera or other
device?
• Are images stored on the
external device?
c Insert a memory card containing images
or connect an external device containing
images.
c Check the file formats that can be
• Is the file format compatible c A file that is not compatible with DCF
with the DCF?
may not be able to be displayed with the
photo frame, even if it can be displayed
with a computer.
Continued
43 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Check item
Cause/Solutions
Some images are
not displayed.
• Are the images displayed in c If the image is displayed in the index view
the index view?
but cannot be displayed as single image,
the image file may be damaged even
though its thumbnail preview data is fine.
c A file that is not compatible with DCF
may not be able to be displayed with the
photo frame, even if it can be displayed
with a computer.
• Does the mark displayed
below appear in the index
view?
c If the mark shown on the left is displayed,
the image file may not be supported by the
photo frame because, for example, it is a
JPEG file that was created with your
computer. Also, the image file may be
supported, but not contain the thumbnail
data. Select the mark and press
to
• Were the images created
with an application on a
computer?
change the screen to the single image
display. If the mark on the left is displayed
again, the image cannot be displayed
because the image file is not supported by
the photo frame.
• Does the mark displayed
below appear in the index
view?
c If the mark shown on the left is displayed,
the image file is supported by the photo
frame, but the thumbnail data or image
itself cannot be opened. Select the mark
and press
. If the mark shown on the
left is displayed again, the image cannot
be displayed.
• Are there more than 9,999
images in the memory card
or external device?
c The photo frame can play, save, delete, or
otherwise handle up to 9,999 image files.
• Did you rename the file with c If you named or renamed the file on your
a computer or other device?
computer and the file name includes
characters other than alphanumeric
characters, the image may not be able to
be displayed on the photo frame.
• Are there eight or more
levels in the folder hierarchy
of the memory card or
external device?
c The photo frame cannot display images
saved in a folder that is more over eight
levels deep.
44 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Check item
Cause/Solutions
The file name is
not displayed
properly.
• Did you rename the file with c If you named or renamed the file on your
a computer or other device?
computer and the file name includes
characters other than alphanumeric
characters, the file name may not be able
to be displayed properly on the photo
frame. Also, for a file created on a
computer or other device, a maximum of
eight characters from the beginning of the
file name can be displayed.
Note
Only alphanumeric characters can be displayed.
Blank areas appear • Is the image extremely high c If an image is extremely high or wide,
at the top and
or wide?
blank areas may appear because of the
bottom.
ratio between the height and width.
Saving and deleting images
Symptom
Check item
Cause/Solutions
Cannot save an
image.
• Is the memory card write-
protected?
c Cancel write-protection and try saving
again.
• Is the write-protect switch of c Slide the write-protect switch to the
the memory card in the
[LOCK] position?
• Is the memory card full?
c Replace the memory card with one with
sufficient free space. Or, delete any
• Is the internal memory full? c Delete any unnecessary images.
Cannot delete an
image.
• Is the memory card write-
protected?
c Use the device you are using to cancel
write-protection and try deleting again.
• Is the write-protect switch of c Slide the write-protect switch to the
the memory card in the
[LOCK] position?
• Are you using “Memory
Stick-ROM”?
c It is not possible to delete an image from
or format “Memory Stick-ROM”.
An image was
deleted
c An image cannot be recovered once it is
deleted.
—
accidentally.
Continued
45 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a digital camera or other external device
Symptom
Check item
Cause/Solutions
The camera is
connected but
nothing is
• Is the cable connected
properly?
c Connect the cable properly.
• Is the photo frame turned
on?
c Turn the photo frame on.
displayed.
Nothing happens
even if the USB
cable is
disconnected and
then connected.
c An over current error may have occurred
with the photo frame. To recover from the
error, turn the power of the photo frame
off and then back on.
—
Images are not
displayed on the
TV screen or LCD
screen.
• The input of the TV is set to c Even if the input of the TV is not set to the
the external input.
photo frame, images may sometimes not
be displayed on the TV screen or LCD
screen if an HDMI cable is connected.
c Change the input of the TV to the photo
frame, or disconnect the HDMI cable and
switch the display to the LCD screen.
Photo frame
Symptom
Check item
Cause/Solutions
Nothing happens
even if you operate
the photo frame.
c Push reset switch on rear side of the photo
frame by thin object such as a pin, etc.
—
46 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Precautions
while connected to the wall outlet via the AC
adaptor.
• Be sure to use the AC adaptor supplied with
the photo frame. Do not use other AC
adaptors, as this may cause a malfunction.
• Do not use the supplied AC adaptor for other
devices.
• Do not use an electrical transformer (travel
converter), as this may cause overheating or
a malfunction.
On safety
• Be careful not to set or drop any heavy
objects on the power cord, or to damage the
power cord in any way. Never operate this
photo frame with a damaged power cord.
• Should any solid object or liquid fall into the
cabinet, unplug the photo frame and have it
checked by qualified personnel before
operating it any further.
• In case the cord of the AC adaptor is
damaged, do not use it any longer, as this
may be dangerous.
On moisture condensation
• Never disassemble the photo frame.
• To disconnect the power cord, pull it out by
the plug. Never pull the power cord itself.
• When the photo frame is not going to be
used for an extended period of time,
disconnect the power cord from the wall
outlet.
• Do not handle the photo frame roughly.
• To reduce the risk of electrical shock, always
unplug the photo frame from the electrical
outlet before cleaning and servicing the
photo frame.
If the photo frame is brought directly from a
cold location to a warm location or placed in an
extremely warm or humid room, moisture may
condense inside the unit. In such cases the
photo frame will probably not work properly
and may even develop a fault if you persist in
using it. If moisture condensation occurs,
unplug the AC power cord of the photo frame
and do not use the photo frame for at least one
hour.
On transport
When you transport the photo frame, remove
the memory card, external devices, AC adaptor
and connected cables from the photo frame and
put the photo frame and its peripherals in the
original box with the protective packaging.
On installation
• Avoid placing the photo frame in a location
subject to:
– vibration
– humidity
– excessive dust
– direct sunlight
– extremely high or low temperatures
• Do not use electrical equipment near the
photo frame. The photo frame will not work
properly in electromagnetic fields.
• Do not place heavy objects on the photo
frame.
If you no longer have the original box and
packing parts, use similar packing material so
that the photo frame will not be damaged while
being transported.
On cleaning
Clean the photo frame with a soft dry cloth, or a
soft cloth lightly moistened with a mild
detergent solution. Do not use any type of
solvent, such as alcohol or benzine, which may
damage the finish.
On the AC adaptor
• Even if your photo frame is turned off, AC
power (house current) is still supplied to it
Continued
47 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
On restrictions on duplication
About the memory cards
TV programs, films, video tapes, portraits of
other people or other materials may be
copyrighted. Unauthorized use of such
materials may infringe the provisions of the
copyright law.
“Memory Stick”
Types of “Memory Stick” that
the photo frame can use
With the photo frame, you can use the
following types of “Memory Stick”*1:
Type of “Memory Displaying
Stick”
Deleting/
Saving
“Memory Stick”*2
(Not compatible
with
OK
OK
“MagicGate”)
“Memory Stick”*2
(Compatible with
“MagicGate”)
OK*5
OK*5
“MagicGate
OK*5
OK*5
OK*5
OK*5
Memory Stick”*2
“Memory Stick
PRO”*2
“Memory Stick
PRO-HG”*2
OK*5*6
OK*5
OK*5*6
OK*5
“Memory Stick
Micro”*3 (“M2”*4)
*1
The photo frame supports FAT32. The photo
frame has been demonstrated as operable with a
“Memory Stick” with a capacity of 8GB or less
manufactured by Sony Corporation. However, we
do not guarantee the operations of all the “Memory
Stick” media.
*2
The photo frame is equipped with a slot compatible
with both standard-size and Duo-size media.
Without a “Memory Stick Duo” adaptor, you can
use both a standard-size “Memory Stick” and the
compact-size “Memory Stick Duo”.
*3
*4
When using a “Memory Stick Micro” with the
photo frame, always insert it into an M2 adaptor.
“M2” is an abbreviation for “Memory Stick
Micro”. In this section, “M2” is used to describe
“Memory Stick Micro”.
*5
Data reading/recording that requires “MagicGate”
copyright protection cannot be performed.
“MagicGate” is the general name of a copyright
48 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
protection technology developed by Sony using
authentication and encryption.
• You cannot record, edit or delete data if you
slide the write-protect switch to LOCK.
*6
The photo frame does not support 8 bit parallel
data transfer.
Write-protect switch
Write
enable
position
Write
protect
position
Notes on use
• For the latest information on the “Memory
Stick” types that the photo frame supports,
see the “Memory Stick” compatibility
information on the Sony web site:
support.html
LOCK
LOCK
Place the label here.
(Select the area where you use your photo
frame, and then select “Digital Photo Frame”
from each area page.)
• Do not insert more than one “Memory Stick”
at the same time, which may cause trouble
with the photo frame.
• If you use a “Memory Stick Micro” with the
photo frame, “Memory Stick Micro” needs
to be inserted into an “M2” adaptor.
• If you insert a “Memory Stick Micro” into
the photo frame without an “M2” adaptor,
you may be unable to remove the “Memory
Stick Micro”.
• Do not attach any other material than the
supplied label on the labelling position.
When you attach the supplied label, be sure
to attach it to the labelling position. Be
careful that the label does not stick out.
SD memory card
The SD memory card slot of the photo frame
allows you to use the following:
• SD memory card*1
• If you insert a “Memory Stick Micro” into an
“M2”adaptor, and insert the “M2” adaptor
into a “Memory Stick Duo” adaptor, the
photo frame may not operate properly.
• When you format a “Memory Stick”, use the
format function of your digital camera. If
you format a “Memory Stick” with your
computer, images may not be displayed
properly.
• When you format a “Memory Stick”, all the
data including protected image files will be
erased. To avoid erasing important data by
accident, make sure to check the contents of
the “Memory Stick” before formatting.
• miniSD card, microSD card
(An adaptor is necessary.)*2
• SDHC memory card*3
• MMC standard memory card*4
We do not guarantee proper operations for all
types of SD memory cards and MMC standard
memory cards.
*1
The photo frame has been demonstrated as
operable with an SD memory card with a capacity
of 2 GB or smaller.
*2
Some commercially available card adaptors have
projected terminals on the rear. This type of
adaptor may not work properly with the photo
frame.
*3
The photo frame has been demonstrated as
operable with an SDHC memory card with a
capacity of 8 GB or less.
*4
The photo frame has been demonstrated as
operable with an MMC standard memory card with
a capacity of 2 GB or less.
Continued
49 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on use
Data reading/recording that requires copyright
protection cannot be performed.
Notes on using a memory card
• When using a card, make sure to check the
correct insertion direction of the card and the
correct insertion slot.
xD-Picture Card
• When inserting the memory card, it will only
insert the portion of the way, so do not try to
force it as this could damage the memory
card and/or photo frame.
• Do not remove a card or turn off the photo
frame while the photo frame is reading or
writing data, or the access indicator is
flashing. Otherwise, data may be rendered
unreadable or erased.
With the xD-Picture Card slot of the photo
frame, you can use an xD-Picture Card*5. Not
all the memory card operations are supported
and we do not guarantee proper operations for
all types of xD-Picture Card.
*5
The photo frame has been demonstrated as
operable with an xD-Picture Card with a
capacity of 2 GB or less.
• We recommend that you save a backup of
important data.
CompactFlash card
• Data processed with the computer may not
be displayed with the photo frame.
• When you carry or store a card, put it in the
case supplied with it.
• Do not touch the terminal of a card with your
hand or a metal object.
• Do not strike, bends or drop a card.
• Do not disassemble or modify a card.
• Do not expose a card to water.
• Do not use or store a card under the
following conditions:
– Locations beyond the required operational
conditions including locations such as the
hot interior of a car parked in the sun and/
or in the summer, the outdoors exposed to
direct sunlight, or a place near a heater.
– Humid locations or locations with
corrosive substances present
The CompactFlash card slot of the photo frame
allows you to use the following:
• CompactFlash Memory Card (Type I/
Type II) and CF+Card (Type I/Type II)-
compatible CompactFlash Card*6
• Microdrive
You can also use the Smart Media card by
using a commercially available CompactFlash
card adaptor*7.
However, we do not guarantee proper
operations for all types of CompactFlash cards.
*6
Use a CompactFlash card with a power
specification of 3.3V or 3.3V/5V. You cannot use
a type for 3V or 5V only. Do not insert other types
of CompactFlash card into the photo frame’s
insertion slot. The photo frame may be damaged.
The photo frame has been demonstrated as
operable with a CompactFlash with a capacity of
8 GB or smaller.
– Locations subject to static electricity or
electrical noises
*7
When using a commercially available
CompactFlash card adaptor, refer to the operating
instructions of the adaptor you use for how to
install the card and adaptor. When using the
CompactFlash card adaptor, the write-protected
card may not work properly.
50 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
BMP: 1, 4, 8, 16, 24, 32 bit Windows
format
RAW (preview only*2): SRF, SR2, ARW
(2.0 or lower version)
(Some image file formats are not
compatible.)
Specifications
x Photo frame
LCD screen
LCD panel:
DPF-V900: 9 inches, TFT active matrix
DPF-V700: 7 inches, TFT active matrix
Total number of dots:
DPF-V900: 1 080 000
(750 × 3 (RGB) × 480) dots
DPF-V700: 1 152 000
(800 × 3 (RGB) × 480) dots
Maximum number of pixels that can be
displayed
8 000 (H) × 6 000 (V) pixels
File system
FAT12/16/32,
sector size of 2 048 bytes or smaller
Image file name
DCF format, 256 characters, within 8th
hierarchy
Display aspect ratio
15:9
Maximum number of files that can be
handled
Effective display area
DPF-V900: 8.6 inches
DPF-V700: 7 inches
9 999 files for a memory card/an external
device
Internal memory capacity*3
512 MB (Approx. 1 000 images*4 can be
saved.)
LCD backlight life
DPF-V900: 15 000 hours
DPF-V700: 20 000 hours
(before brightness of the backlight being
reduced to half)
Power requirements
DC IN jack, DC 8.4V
Maximum decodable file size
Power consumption
DPF-V900: 12 W
DPF-V700: 8 W
100 MB
Input/Output connectors
HDMI OUT (output) connector
A-TYPE connector,
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
1 080i (60Hz)/1 080i (50Hz)/
720p (60Hz)/720p (50Hz)/
576p (50Hz)/480p (60Hz) compatible,
BRAVIA Sync compatible
USB connector (miniB, full-speed)
Bluetooth/USB A connector
(Type A, full-speed)
Storage temperature
–20 °C to 60 °C (–4 °F to 140 °F)
Dimensions
[Without the stand]
DPF-V900:
Approx. 245 × 162 × 38.5 mm
(9 3/4 × 6 1/2 × 1 9/16 inches)
DPF-V700:
Approx. 207 × 137 × 38.5 mm
(8 1/4 × 5 1/2 × 1 9/16 inches)
(width/height/depth)
Slots
“Memory Stick PRO” slot
SD memory card/MMC/
xD-Picture Card slot
CompactFlash card/Microdrive slot
Compatible image file formats
JPEG: DCF 2.0 compatible, Exif 2.21
compatible, JFIF*1
[With the stand spread out]
DPF-V900:
Approx. 245 × 162 × 145 mm
(9 3/4 × 6 1/2 × 5 3/4 inches)
TIFF: Exif 2.21 compatible
Continued
51 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
DPF-V700:
Customer support home page
The latest support information is available at the
following home page address:
Approx. 207 × 137 × 125 mm
(8 1/4 × 5 1/2 × 5 inches)
(width/height/depth)
Mass
DPF-V900: Approx. 800 g (1 lb 12 oz)
DPF-V700: Approx. 550 g (1 lb 3 oz)
(excluding the AC adaptor)
Included accessories
x AC adaptor AC-L200
Power requirements
- 100 V to 240 V, 50/60 Hz
Power consumption
18 W
Rated output voltage
8.4 V
Dimensions
Approx. 48 × 29 × 81 mm
(1 15/16 × 1 3/16 × 3 1/4 inches)
(width/height/depth)
(excluding the protruding parts)
Mass
Approx. 170 g (6 oz)
See the label of AC adaptor for more details.
Design and specifications are subject to change
without notice.
*1: Baseline JPEG with 4:4:4, 4:2:2, or 4:2:0 format
*2: RAW files are displayed as thumbnail preview.
*3: The capacity is calculated as 1 MB is equivalent to
1 000 000 bytes. The actual capacity is reduced as
files for management and applications are
included. Approx. 400 MB can be used for your
actual operation.
*4: Approximate number is shown when the images
taken by 2 000 000 pixels equivalent camera are
saved. The value may vary depending on the
shooting condition.
52 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed using VOC (Volatile
Organic Compound)-free
vegetable oil based ink.
Sony Corporation Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|