Sony DVR DAV D150G User Manual

4-255-608-11

DVD/VCR Receiver

Home Theatre System

Operating Instructions

PAL

DAV-D150G

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

ꢀ Slow Motion. . . . . . . . . . . . . . . . . . . . . . . . . 32

ꢀ Shuffle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

ꢀ Repeat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

ꢀ Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 32

ꢀ Time Search . . . . . . . . . . . . . . . . . . . . . . . . 32

ꢀ 3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 32

Special DVD Features . . . . . . . . . . . . . . . . . . . . 33

ꢀ Checking the contents of

Introduction

Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Playable Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . 5

About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Selecting the Viewing Source. . . . . . . . . . . . . . . . 5

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Display Window . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

DVD Video discs: Menus . . . . . . . . . . . . . . . 33

ꢀ Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 33

ꢀ DVD Menu. . . . . . . . . . . . . . . . . . . . . . . . . . 33

ꢀ Camera Angle . . . . . . . . . . . . . . . . . . . . . . . 33

ꢀ Changing the Audio Language . . . . . . . . . . . 33

ꢀ Changing the Audio Channel . . . . . . . . . . . . 33

ꢀ Subtitle . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

ꢀ Screen Saver. . . . . . . . . . . . . . . . . . . . . . . . 33

Audio CD and MP3 Disc Operation . . . . . . . . . 34-35

Playing an Audio CD and MP3 Disc . . . . . . . . . . 34

Notes on MP3 Files . . . . . . . . . . . . . . . . . . . . . . 34

ꢀ Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

ꢀ Selecting Another Track. . . . . . . . . . . . . . . . 35

ꢀ Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

ꢀ Shuffle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

ꢀ Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

ꢀ Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 35

ꢀ 3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 35

ꢀ Changing the Audio Channel . . . . . . . . . . . . 35

JPEG File Operation . . . . . . . . . . . . . . . . . . . . . . . 36

Viewing JPEG Files on a Disc . . . . . . . . . . . . . . 36

ꢀ Selecting another Files . . . . . . . . . . . . . . . . 36

ꢀ Still Picture . . . . . . . . . . . . . . . . . . . . . . . . . 36

ꢀ To flip the picture . . . . . . . . . . . . . . . . . . . . . 36

ꢀ To rotate picture. . . . . . . . . . . . . . . . . . . . . . 36

ꢀ To record the picture slide show. . . . . . . . . . 36

Notes on JPEG Files . . . . . . . . . . . . . . . . . . . . . 36

Programmed Playback . . . . . . . . . . . . . . . . . . . . . 37

Programmed Playback with Audio CD

and MP3 Disc . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Programmed Playback with Video CD . . . . . . . . 37

ꢀ Repeat Programmed Tracks . . . . . . . . . . . . 37

ꢀ Erasing a Track from Program List. . . . . . . . 37

ꢀ Erasing the whole Program List . . . . . . . . . . 37

Speaker Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Radio Operation . . . . . . . . . . . . . . . . . . . . . . . . 39-40

Presetting the Radio Stations. . . . . . . . . . . . . . . 39

Listening to the Radio . . . . . . . . . . . . . . . . . . . . 39

To Clear the Stored Radio Stations . . . . . . . . . . 39

Tuning into a Station Manually . . . . . . . . . . . . . . 40

RDS Operation . . . . . . . . . . . . . . . . . . . . . . . . . 40

Preparation

Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-12

TV and External (or Set Top Box) Connections. . 10

Radio Aerial Connections . . . . . . . . . . . . . . . . . . 11

Accessory Audio/Video (A/V)

Connections to DVD/VCR Receiver . . . . . . . . . . 11

Digital Device Connections. . . . . . . . . . . . . . . . . 11

Speaker System Connections . . . . . . . . . . . . . . 12

Speaker Positioning . . . . . . . . . . . . . . . . . . . . . . 12

Selecting the Input/Output Source . . . . . . . . . . . . 13

Mini Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Mini Glossary for Audio Stream

and Surround mode . . . . . . . . . . . . . . . . . . . . . . 14

Sound Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . 14

Muting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

VIDEO Operation Setup . . . . . . . . . . . . . . . . . . 15-19

Video Channel Set. . . . . . . . . . . . . . . . . . . . . . . 15

How to use the main menu . . . . . . . . . . . . . . . . 15

Tuning in TV Stations Automatically . . . . . . . . . . 16

Tuning in TV Stations Manually . . . . . . . . . . . 16-17

Changing the order of TV Stations . . . . . . . . . . . 17

Deleting TV Stations . . . . . . . . . . . . . . . . . . . . . 18

Setting the Clock Manually. . . . . . . . . . . . . . . . . 18

To set the colour system . . . . . . . . . . . . . . . . . . 19

DVD Operation Setup . . . . . . . . . . . . . . . . . . . . 20-23

General Explanation. . . . . . . . . . . . . . . . . . . . . . 20

On-Screen Display. . . . . . . . . . . . . . . . . . . . . . . 20

Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . 21-23

ꢀ General Operation . . . . . . . . . . . . . . . . . . . . 21

ꢀ Language . . . . . . . . . . . . . . . . . . . . . . . . . . 21

ꢀ Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

ꢀ Parental Control. . . . . . . . . . . . . . . . . . . . . . 22

ꢀ Speaker Setup. . . . . . . . . . . . . . . . . . . . . . . 23

ꢀ Others (DRC/PBC) . . . . . . . . . . . . . . . . . . . 23

Reference

Operation

Controlling the TV with the Supplied Remote . . . 41

Language Code List . . . . . . . . . . . . . . . . . . . . . . . 42

Area Code List. . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . 44-45

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . 46-47

VIDEO Operation . . . . . . . . . . . . . . . . . . . . . . . 24-29

Playing a tape . . . . . . . . . . . . . . . . . . . . . . . . . . 24

ꢀ CM (Commercial Message) Skip . . . . . . . . . 24

ꢀ OPR (Optimum Picture Response). . . . . . . . 24

Instant Timer Recording (ITR) . . . . . . . . . . . . . . 25

VIDEO Plus+ System recording. . . . . . . . . . . . . 26

Timer recording using On Screen Display. . . . . . 27

Hi-Fi Stereo Sound System . . . . . . . . . . . . . . . . 28

Widescreen Compatibility 16:9 . . . . . . . . . . . . . . 28

Copying from DVD to VIDEO . . . . . . . . . . . . . . . 29

Recording from another video recorder . . . . . . . 29

Additional Information . . . . . . . . . . . . . . . . . . . . . 30

On Screen Display (OSD) . . . . . . . . . . . . . . . . . 30

DVD and Video CD Operation . . . . . . . . . . . . . 31-33

Playing a DVD and Video CD. . . . . . . . . . . . . . . 31

General Features. . . . . . . . . . . . . . . . . . . . . . . . 31

ꢀ Resuming Playback . . . . . . . . . . . . . . . . . . . 31

ꢀ Selecting Another TITLE . . . . . . . . . . . . . . . 31

ꢀ Selecting Another CHAPTER/TRACK. . . . . . 31

ꢀ Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

ꢀ Still Picture . . . . . . . . . . . . . . . . . . . . . . . . . 31

About the symbols for instructions

Indicates hazards likely to cause harm to the unit

itself or other material damage.

Note Indicates special operating features of this unit.

Tip Indicates tips and hints for making the task easier.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Use

Disc-related terms

Playable Discs

Title (DVD only)

The main film content or accompanying feature content

or additional feature content, or music album.

Each title is assigned a title reference number enabling

you to locate it easily.

DVD

(8 cm / 12 cm disc)

Video CD (VCD)

(8 cm / 12 cm disc)

Chapter (DVD only)

Audio CD

(8 cm / 12 cm disc)

Sections of a picture or a musical piece that are smaller

than titles. A title is composed of one or several chap-

ters. Each chapter is assigned a chapter number,

enabling you to locate the chapter you want. Depending

on the disc, chapters may not be recorded.

In addition, this unit can play a DVD-R/±RW, SVCD and

CD-R or CD-RW that contains audio titles, MP3 or

JPEG files.

Notes

Track (Video CD and Audio CD only)

– Depending on the conditions of the recording equip-

ment or the CD-R/R (or DVD-R, DVD±RW) disc itself,

some CD-R/R (or DVD-R, DVD±RW) discs cannot be

played on the unit.

Sections of a picture or a musical piece on a video CD

or an audio CD. Each track is assigned a track number,

enabling you to locate the track you want.

– Do not attach any seal or label to either side (the

labeled side or the recorded side) of a disc.

Scene

On a video CD with PBC (Playback control) functions,

moving pictures and still pictures are divided into sec-

tions called “Scenes”. Each scene is displayed in the

menu screen and assigned a scene number, enabling

you to locate the scene you want.

–

Do not use irregularly shaped CDs (e.g., heart-shaped

or octagonal). It may result in malfunctions.

Notes on DVDs and Video CDs

Some playback operations of DVDs and Video CDs

may be intentionally fixed by software manufacturers.

As this unit plays DVDs and Video CDs according to

disc content designed by the software manufacturer,

some playback features of the unit may not be available

or other functions may be added.

A scene is composed of one or several tracks.

Types of video CDs

There are two types of video CDs:

Make sure to also refer to the instructions supplied with

the DVDs and Video CDs. Some DVDs made for busi-

ness purposes may not be able to be played on the

unit.

Video CDs equipped with PBC (Version 2.0)

PBC (Playback control) functions allow you to interact

with the system via menus, search functions, or other

typical computer-like operations. Moreover, still pictures

of high resolution can be played if they are included in

the disc.

Regional code of the DVD/VCR Receiver and DVDs

This DVD/VCR Receiver is designed and manu-

factured for playback of region “2” encoded DVD

Video CDs not equipped with PBC (Version 1.1)

Operated in the same way as audio CDs, these discs

allow playback of video pictures as well as sound, but

they are not equipped with PBC.

software. The region code on the labels of some

DVDs indicates which type of player can play

those discs. This unit can only play DVDs labeled “2” or

“ALL”. If you try to play any other discs, the message

“Check Regional Code” will appear on the TV screen.

Some DVDs that have no region code label may still be

subject to area restrictions and therefore not playable.

Notes

“Music discs encoded with copyright protection tech-

nologies”

This product is designed to playback discs that con-

form to the Compact Disc (CD) standard.

Recently, various music discs encoded with copyright

protection technologies are marketed by some record

companies. Please be aware that among those discs,

there are some that do not conform to the CD stan-

dard and may not be playable by this product.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Use (Continued)

Precautions

Cleaning discs

Fingerprints and dust on the disc can cause poor picture

quality and sound distortion. Before playing, clean the disc

with a clean cloth. Wipe the disc from the center out.

Handling the unit

When shipping the unit

The original shipping carton and packing materials

come in handy. For maximum protection, re-pack the

unit as it was originally packaged at the factory.

Yes

When setting up the unit

The picture and sound of a nearby TV, VCR, or radio

may be distorted during playback. In this case, position

the unit away from the TV, VCR, or radio, or turn off the

unit after removing the disc.

Do not use strong solvents such as alcohol, benzine,

thinner, commercially available cleaners, or anti-static

spray intended for older vinyl records.

To keep the surface clean

Do not use volatile liquids, such as insecticide spray,

near the unit. Do not leave rubber or plastic products in

contact with the unit for a long period of time. They will

leave marks on the surface.

About Symbols

About the

symbol display

“

” may appear on the TV screen during operation. This

Cleaning the unit

icon means the function explained in this owner’s manual

is not available at that moment or with that specific DVD.

To clean the cabinet

Use a soft, dry cloth. If the surfaces are extremely dirty,

use a soft cloth lightly moistened with a mild detergent

solution. Do not use strong solvents such as alcohol,

benzine, or thinner, as these might damage the surface

of the unit.

About the disc symbols for instructions

A section whose title has one of the following symbols are

applicable only to those discs represented by the symbol.

DVD DVD

To obtain a clear picture

VCD2.0

VCD1.1

Video CDs with the PBC (playback control)

function.

The DVD/VCR Receiver is a high-tech, precision

device. If the optical pick-up lens and disc drive parts

are dirty or worn, the picture quality will be poor.

Regular inspection and maintenance are recommended

after every 1,000 hours of use. (This depends on the

operating environment.)

Video CDs without the PBC (playback control)

function.

Audio CDs.

MP3 MP3 Discs.

JPEG Files.

For details, please contact your nearest dealer.

JPEG

Selecting the Viewing Source

You must select one of your output sources (DVD or

VIDEO) to view on the TV screen.

Notes on Discs

Handling discs

• If you want to view DVD deck output source:

Press DVD on the remote or DVD/VIDEO on the front panel

until DVD indicator in the display window lights and output

source of DVD deck is viewed on the TV screen.

• If you want to view VIDEO deck output source:

Press VIDEO on the remote or DVD/VIDEO on the front

panel until VIDEO indicator in the display window lights and

output source of VIDEO deck is viewed on the TV screen.

Do not touch the playback side of the disc.

Hold the disc by the edges so that fingerprints will not

get on the surface.

Do not stick paper or tape on the disc.

Note

If you insert a cassette tape without an erasure preven-

tion tab intact while the DVD/VCR Receiver is in the

DVD mode, the DVD/VCR Receiver will switch to

VIDEO function mode automatically.

Storing discs

After playing, store the disc in its case.

Do not expose the disc to direct sunlight or sources of

heat, or leave it in a parked car exposed to direct sun-

light, as there may be a considerable temperature

increase inside the car.

Download from Www.Somanuals.com. All Manuals Search And Download.

Front Panel

A VIDEO

Ejects the tape in the VIDEO deck.

@ / 1

Switches the DVD/VCR Receiver ON and OFF.

AV 3 IN (VIDEO/AUDIO (Left/Right))

Connect the audio/video output of an

external source (Audio system, TV/ Monitor,

another VCR).

VOLUME

Adjusts sound level of speakers.

x (STOP)

Stops playback or recording.

Disc Tray (DVD deck)

Insert a disc here.

X (PAUSE)

Pause playback or recording

temporarily.

INPUT SELECT

Selects the VIDEO deck’s

source (Tuner, AV1, AV2,

AV3 OPT or AV3).

H (PLAY)

To play back a disc or

a recorded tape.

Video Cassette Compartment (VIDEO deck)

Insert a video cassette here.

TUNER FM/AM

Selects Radio opera-

tion mode.

Display window

Shows the current sta-

tus of the DVD/VCR

Receiver.

A DVD

CH/PRESET (+/–)

Opens or closes

the disc tray.

Scans up or down through

memorized channels or radio

frequencies (stations).

DVD/VIDEO

Toggles control

between the DVD deck

and the VIDEO deck.

Remote Sensor

Point the DVD/VCR Receiver remote

control here.

l m

DVD: Go to beginning of current chapter/track or to previous chapter/track.

Press and hold for a fast reverse search.

VIDEO: Rewinds the tape from STOP mode or for fast reverse picture search.

M L

DVD: Go to NEXT chapter/track. Press and hold for a fast forward search.

VIDEO: Advances the tape from STOP mode or for fast forward picture search.

z REC/ITR

To record normally or to activate Instant Timer Recording.

Download from Www.Somanuals.com. All Manuals Search And Download.

Display Window

SHUFFLE RANDOM playback active

SP LP Displays the recording

and playback speed.

Indicates repeat mode

A cassette is in the VIDEO deck.

PGM Programmed playback active.

BIL Indicates when a BILINGUAL broadcast is being received.

STEREO Indicates a stereo broadcast is being received.

HI-FI Indicates the unit is playing

back a tape recorded in Hi-Fi.

ANGLE active

OPT Indicates source of DVD/VCR

Receiver is DIGITAL AUDIO IN.

RDS Lights up when the FM station tuned

is transmitting RDS data.

Indicates encoding format of the

current disc.

Indicates sound mode is

DOLBY PROLOGIC II.

SHUFFLE PGM

BIL STEREO

CHAP TRK

PCM

RDS ANGLE HI-FI

REC

REPEAT 1

VIDEO TIMER

OPT

SP LP

MP3

DVD

VCDPBC

REC DVD/VCR Receiver is

Recording.

TIMER DVD/VCR Receiver is in timer

recording or a timer recording is pro-

grammed.

VIDEO DVD/VCR Receiver functions are available

and channels are selected at DVD/VCR Receiver.

Indicates clock, total playing time, elapsed time, chapter number, track number,

channel, radio frequency, volume, channel or current deck status (Playback,

Pause, etc).

Indicates playback or pause mode.

PBC Indicates PBC On mode

DVD DVD inserted.

CD Audio CD inserted.

VCD Video CD inserted

MP3 MP3 disc inserted

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Control

VIDEO

Select the output source to VIDEO.

TV @ / 1

Switches TV ON and OFF.

DVD

Sets the output source to DVD.

@ / 1

Switches DVD/VCR Receiver ON and OFF.

INPUT SELECT

Selects the VIDEO deck’s source

(AV1, AV2, AV3 OPT, AV3, Tuner).

TV Control Buttons (see page 41)

• VOL +/–: Adjusts TV’s volume.

• CH +/–: Selects TV’s channel.

• TV/VIDEO: Selects the TV’s source.

TUNER FM/AM

Selects the DVD/VCR Receiver’s tuner

as the listening choice. (FM and AM

bands)

CLEAR

Removes a track number on the program

menu. To clear preset stations from the

tuner memory.

0-9 numerical buttons

Selects numbered options in a menu.

Playback Control Buttons

• H (PLAY)

Starts playback.

• x (STOP)

Stops playback.

TUNING (+/–)

To tune in the desired station.

MEMORY

Memorize a radio station frequency into

the tuner.

• . (PREV) (DVD mode only)

Go to beginning of current chapter or

track or go to previous chapter or track.

• > (NEXT) (DVD mode only)

Go to next chapter or track.

• m/M (SLOW t/T)

DVD: For picture search or slow play-

back backward or forward.

VIDEO: Rewinds or advances the tape

in STOP mode or for picture search.

• X (PAUSE)

RDS

Start a search for a specific PS type.

SHUFFLE

Plays tracks in random order.

PROGRAM

Enters to the program edit mode or exits

from that.

z REC/ITR

Records normally or activates Instant

Timer Recording.

Pause playback or recording temporari-

ly.

ANGLE

Selects a DVD camera angle if available.

TV/VIDEO

To view channels selected by the VIDEO

tuner or by the TV tuner.

SUBTITLE

Selects a subtitle language.

SP/LP

Selects recording speed.

AUDIO

Selects an audio language (DVD) or an

audio channel (CD).

CM SKIP

Fast forwards picture search through 30

seconds of recording.

REPEAT

Repeat chapter, track, title, all.

VIDEO PLUS

To display the programme menu for

VIDEO Plus+ System programming.

A-B

Repeats sequence.

DVD TOP MENU

Displays the disc’s Title menu, if available.

SETUP/MENU (i)

Accesses or returns DVD setup menu

and VIDEO setup menu.

DVD MENU

Accesses menu on a DVD disc.

SOUND FIELD

Selects sound mode between BYPASS,

PRO LOGIC, PRO LOGIC II (MOVIE,

MUSIC, MATRIX) and 3D SURROUND.

B/b/V/v (left/right/up/down)

Selects an option in the menu.

CH/PRESET(+/–): Selects a program of

VIDEO or Tuner. Adjusts manually the

tape’s picture onscreen.

VOL (+/-)

Adjusts speaker volume.

MUTING

Momentarily silence the speaker of the

DVD/VCR Receiver.

ENTER/OK

Acknowledges menu selection.

DVD DISPLAY, CLK/CNT

Accesses On-Screen display. Switches

among the clock and tape counter.

RETURN

Returns the setup menu.

Note

This remote control uses the same buttons for VIDEO and

DVD functions (ex. PLAY).

To use the VIDEO, first press the VIDEO button.

To use the DVD, first press the DVD button.

Download from Www.Somanuals.com. All Manuals Search And Download.

Rear Panel

FM ANTENNA Connectors

Connect the FM antenna to this terminal.

SPEAKERS Connectors

Connect the six supplied speakers to these terminals.

EURO AV2 EXTERNAL (VIDEO IN)

Connect to external (Set Top Box or another video

recorder).

AC Power Cord

Plug into the power source.

AV3 (OPTICAL IN)

(DIGITAL AUDIO IN)

Connect to a digital audio output on a

digital device.

ANTENNA IN

Connect the VHF/UHF/CATV

antenna to this terminal.

ANTENNA OUT (DVD/VIDEO OUT)

Connect to a TV with RF coaxial inputs.

AM ANTENNA Connectors

Connect the AM antenna to this terminal.

EURO AV1 (TO TV) (VIDEO IN+OUT/DVD OUT)

Connect to your TV set or another video recorder.

Dust Protection Cap

Remote control battery installation

Remove the dust protection cap from the OPTICAL IN

jack and connect the optical digital cable (not supplied)

securely so that the configurations of both the cable and

the connector match. Keep the dust protection cap and

always reattach the cap when not using the connector to

protect against dust intrusion.

Detach the battery cover on the rear of

the remote control, and insert two R6

(size AA) batteries with

aligned correctly.

and

When using the remote control, point it

at the remote sensor on the unit.

Caution

Do not mix old and new batteries. Never mix different

types of batteries (standard, alkaline, etc.).

Do not touch the inner pins of the jacks on the rear

panel. Electrostatic discharge may cause permanent

damage to the unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

TV and External (or Set Top Box) Connections

Make one of the following connections, depending on the capabilities of your existing equipment.

SCART INPUT

AERIAL

Rear of TV

Tips

Basic connection (RF)

Connect the aerial cable (A) from your indoor/ out-

ꢀ Depending on your TV and other equipment you wish

to connect, there are various ways you could connect

the DVD/VCR Receiver. Use one of the connections

described below.

door aerial to ANTENA IN jack on the rear panel of

DVD/VCR Receiver

Connect the supplied RF cable (R) from the

2 _{ANTENA OUT jack on the rear panel of}

Notes

When you connect the DVD/VCR Receiver to your TV,

be sure to turn off the power and unplug both units from

the wall outlet before making any connections.

ꢀ Please refer to the manuals of your TV, VIDEO,

Stereo System or other devices as necessary to

make the best connections.

DVD/VCR

Receiver to your television’s Aerial Input.

Caution

Make sure the DVD/VCR Receiver is connected direct-

ly to the TV. Select the correct AV input on your TV.

–

– Do not connect your DVD/VCR Receiver to TV via

your VIDEO. The DVD image could be distorted by

the copy protection system.

Basic connections (AV)

Connect the EURO AV1 (TO TV) on the rear panel

of the DVD/VCR Receiver to the scart input socket

on the TV using a SCART lead (E).

You can connect such a Satellite, Cable or Digital

2 _{set top box to the}

DVD/VCR Receiver (D).

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections (Continued)

Radio Aerial Connections

Connect the supplied FM/AM antennas for radio listen-

ing.

Digital Device Connections

Connect the OPTICAL IN jacks on the DVD/VCR

Receiver to the digital audio out (optical) jacks on your

digital device (Game device, Digital Set Top Box, etc.),

using optional optical audio cable.

Connect the AM loop antenna to the AM antenna

connectors.

To select source of DVD/VCR Receiver to OPTICAL IN,

press INPUT SELECT repeatedly on the remote control

until “AV3 OPT” appears in the display window.

Connect the FM wire antenna to the FM antenna

connectors.

Notes

ꢀ If the audio format of the digital output does not

match the capabilities of your DVD/VCR Receiver, the

DVD/VCR Receiver will produce a strong, distorted

sound or no sound at all.

ꢀ The Optical input function is available only when the

other unit’s Sampling Frequency is 32 - 48kHz.

ꢀ To prevent noise pickup, keep the AM loop antenna

away from the DVD/VCR Receiver and other compo-

nents.

ꢀ Be sure to fully extend the FM wire antenna.

ꢀ After connecting the FM wire antenna, keep it as hori-

zontal as possible.

Accessory Audio/Video (A/V)

Connections to DVD/VCR Receiver

Connect the AV3 IN jacks on the DVD/VCR Receiver to

the audio/video out jacks on your accessory compo-

nent, using optional audio/video cables.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections (Continued)

Speaker System Connections

Speaker Positioning

For a normal setup use 6 speakers (2 front speakers,

center speaker, 2 rear speakers and subwoofer).

Connect the speakers using the supplied speaker cords

by matching the colors of the terminals and those of the

cords. To obtain the best possible surround sound,

adjust the speaker parameters (distance, level, etc.).

• Front Speakers

Based on your listening position, set up the speakers

at equal distance. And by hearing position, set up an

interval between speakers of 45 degree.

Notes

ꢀ Be sure to match the speaker cord to the appropriate

terminal on the components: 3 to 3 and # to #. If

the cords are reversed, the sound will be distorted

and lack bass.

ꢀ If you use front speakers with low maximum input rat-

ing, adjust the volume carefully to avoid excessive

volume output to the speakers.

• Center Speaker

It is ideal that the center speakers and front speakers

are same height. But normally place it above or below

the television as shown below.

• Rear Speakers

Place the rear surround speakers to the left and right

behind the primary listening area. These speakers

recreate sound motion and atmosphere required for

surround playback. For best results, do not install the

rear speakers too far behind the listening position,

install them at or above the level of the listener’s ears.

It is also effective to direct the rear speakers towards

a wall or ceiling to further disperse the sound.

In the case of a smaller room size, if the audience is

near to the rear wall set the rear speakers opposite

each other, and set the rear speakers 60 - 90 cm

above the listener’s ears.

ꢀ

Do not disassemble the front covers of supplied speakers.

Center

Speaker

Front Speaker

(Left)

Front Speaker

(Right)

• Subwoofer

This can be placed in any front position.

Subwoofer

Center Speaker

Front

Speaker

(Left)

Front

Speaker

(Right)

Rear

Speaker

(Left)

Rear

Speaker

(Right)

Rear speaker

(Right surround)

Rear speaker

(Left surround)

Speaker Positioning Example

Subwoofer

Note

Speaker stand is optional.

About Ferrite Core

Be sure to attach the ferrite core to

the speaker cables (for connecting to

this unit).

Attaching the foot pads

To prevent speaker vibration or

movement while listening, attach the

supplied foot pads to the speaker, as

shown.

This ferrite core can reduce noises.

How to attach the ferrite core.

Foot pads

1 Push the stopper [a] of the ferrite core

to open.

Wind the Center and Subwoofer Speaker

Attaching the color labels

cables once on the ferrite core.

Pass the others straight on the ferrite core.

Attach the color labels onto the rear

panel of the speakers before con-

necting the speakers.

FRONT

Close the ferrite core until it clicks.

Color labels

Download from Www.Somanuals.com. All Manuals Search And Download.

Selecting the Input/Output Source

Follow these guidelines to select and switch among the

various DVD/VCR Receiver input and output sources:

DVD

VIDEO

• DVD

To view output from the DVD deck:

Press DVD on the remote or DVD/VIDEO on the on

the front panel until the DVD indicator on the front

panel lights and output from the DVD deck is viewed

on the TV screen.

TUNER

FM/AM

• VIDEO

To view output from the VIDEO deck:

Press VIDEO on the remote or DVD/VIDEO on the

front panel until the VIDEO indicator on the front

panel lights and output from the VIDEO deck is

viewed on the TV screen.

INPUT

SELECT

• TUNER FM/AM

To listen to AM/FM radio broadcasts:

Press TUNER FM/AM on the remote to toggle

between AM and FM radio. Press TUNER FM/AM to

toggle between AM and FM radio. The selected fre-

quency appears in the display window.

• INPUT SELECT

To listen and view to an audio source connected

to the EURO AV1:

Press INPUT SELECT on the remote control once.

The “AV1” appears in the display window and TV

screen. Audio and Video will come from an external

source connected to the EURO AV1 (for rear panel).

To listen and view to an audio source connected

to the EURO AV2:

Press INPUT SELECT on the remote control a sec-

ond time. The “AV2” appears in the display window

and TV screen. Audio and Video will come from an

external source connected to the EURO AV2 (for rear

panel).

To listen to an audio source connected to the

OPTICAL IN jack :

Press INPUT SELECT on the remote control a third

time. The “AV3 OPT” appears in the display window.

Audio will come from an external source connected

to the OPTICAL IN jack (for rear panel).

To listen and view to an audio source connected

to the AUDIO jack of AV3 IN with video from AV3:

Press INPUT SELECT on the remote control a fourth

time. The “AV3” appears in the display window and

TV screen. Audio and Video will come from an exter-

nal source connected to the AUDIO/VIDEO jacks of

AV3 IN (for front panel).

Download from Www.Somanuals.com. All Manuals Search And Download.

Mini Glossary

BYPASS

Mini Glossary for Audio Stream

and Surround mode

Software with multichannel surround audio signals is played

according to the way it was recorded.

Sound Mode

You can enjoy surround sound simply by selecting one

of the pre-programmed sound fields according to the

programme you want to listen to.

Allows you to enjoy 5.1(or 6) discrete channels of high quality

digital audio from DTS programme sources such as discs,

DVD and compact discs, etc.bearing the trademark. DTS

Digital Surround delivers up to 6 channels of transparent

audio(which means identical to the original masters) and

results in exceptional clarity throughout a true 360 degree

sound field. The term DTS is a trademark of DTS Technology,

LLC. Manufactured under license from DTS Technology, LLC.

Press SOUND FIELD repeatedly until the sound mode

you want appears in the display window as below.

Each time you press SOUND FIELD button, the sound

mode is changed in the following order;

(Dolby Digital)

The Dolby Digital surround format lets you enjoy up to 5.1

channels of digital surround sound from a Dolby Digital pro-

PRO LOGIC → PL2 MOVIE → PL2 MUSIC → PL2 MATRIX →

3D SURROUND → BYPASS

gramme source. If you play DVDs with “

” mark, you can

enjoy even better sound quality, greater spatial accuracy, and

improved dynamic range.

When DVD is inserted.

You can change the sound mode of DVD (Dolby Digital, DTS,

PRO LOGIC, etc) by pressing the AUDIO button on the remote

during playback.

(Dolby Pro Logic)

Use this mode when playing movie or Dolby Digital 2 channel

which carries the “

” mark. This mode provides the effect

Although the DVD contents differ from disc to disc, the follow-

ing explains the basic operation when this feature is used.

of being in a movie theatre or live concert house-an effect with

an intensity which can only be obtained through DOLBY PRO

LOGIC SURROUND. The effect of the front/back/left/right

movement of the sound image, as well as the sense of fixed

position in the sound image, is much clearer and more dynam-

ic than before.

Each time you press AUDIO button, the sound mode of DVD is

changed as the following order;

→

(Dolby Pro Logic II)

For your reference

Dolby Pro Logic II creates five full-bandwidth output channels

from two-channel sources. This is done using an advanced,

high-purity matrix surround decoder that extracts the spatial

properties of the original recording without adding any new

sounds or tonal colorations.

•

The DVD/VCR Receiver memorizes the last mode

settings for each source individually.

You can identify the encoding format of pro-

gramme software by looking at its packaging.

•

- Dolby Digital discs are labeled with the

- Dolby Surround encoded programs are labeled with

the logo.

- DTS Digital Surround discs are marked with DTS.

logo.

MOVIE mode:

The Movie mode is for use with stereo television shows and all

programs encoded in Dolby Surround. The result is enhanced

soundfield directionality that approaches the quality of discrete

5.1-channel sound.

MUSIC mode:

Note

When you play sound tracks with 96kHz sampling frequency, the

output signals will be converted to 48kHz (sampling frequency).

The Music mode is for use with any stereo music recordings,

and provides a wide and deep sound space. The Music mode

includes controls that allow the sound to be tailored to individual

listening tastes.

Volume Control

You can adjust the volume by rotating VOLUME on the

front panel or by pressing VOL (+/–) on the remote con-

trol repeatedly.

MATRIX mode:

The Matrix mode is the same as the Music mode except that the

directional enhancement logic is turned off. It may be used to

enhance mono signals by making them seem “larger.” The

Matrix mode may also find use in auto systems, where the fluc-

tuations from poor FM stereo reception can otherwise cause dis-

turbing surround signals from a logic decoder. The ultimate

“cure” for poor FM stereo reception may be simply to force the

audio to mono.

Muting

Press MUTING to mute your unit.

You can mute your unit in order, for example, to answer

the telephone, “MUTING” indicator in the display win-

dow. To exit mute mode, press MUTING again.

3D SURROUND

This unit can produce a 3D Surround effect, using 3D Surround

Sound technology, which simulates multi-channel audio play-

back from two conventional stereo speakers instead of the five

or more speakers normally required to listen to multi-channel

audio from a home theatre. This feature works with DVD discs

encoded with Dolby Pro Logic and Dolby Digital audio tracks.

Download from Www.Somanuals.com. All Manuals Search And Download.

VIDEO Operation Setup

Video channel set

How to use the main menu

Video channel (RF output channel) is the channel on

which your TV receives picture and sound signals from

the DVD/VCR Receiver through the RF cable.

This DVD/VCR Receiver can easily be programmed by

using the menus displayed on screen.

The menus are controlled from the Remote Control

Handset.

If you have used a SCART lead you will not have to tune

your TV, simply select the AV channel. The AV channel

is already pre-tuned for optimum video playback on

your TV.

Switch on your TV set and DVD/VCR Receiver

by pressing @ / 1.

Press MENU (i).

2 _{The main menu will appear on the TV screen.}

Perform the following steps only if interference appears

in the TV picture after you have moved to a different

area or a new station has started broadcasting in your

area, or if you change the connection from RF connec-

tion to AV connection, or vise versa.

A B

Pr-12

TIME SYS-

SET

REC

ACMS

OSD

DATE

NIC

TEM

Indicates current

selected icon.

REC

OSD

OFF

Turn on DVD/VCR Receiver and TV.

16:9

4:3

OPR

Set the vacant position 52 on your TV.

ꢀ REC

Timer recording setting (see pages 27).

Press @ / 1 on the remote control to enter the

3 _{standby mode.}

ꢀ PR SET

Manual tuning setting (see page 16-17).

Press and hold CH/PRESET + or – on the

4 _{DVD/VCR Receiver for more than}

4 seconds.

ꢀ ACMS

ACMS (Automatic Channel Memory System) (see

page 16).

ꢀ TIME DATE

Date and clock setting (see page 18).

RF 52 will appear in the DVD/VCR Receiver dis-

play.

SYSTEM

To set the Colour TV System (see page 19).

ABC OSD

To change the language setting for OSD. You can

select the language from English, German,

French, Italian, Spanish, Dutch, and Portuguese.

RF CHANNEL

SET

The following picture will be displayed on the TV

screen.

If the picture is snowy, move to step 5.

If the picture is clean, press @ / 1 on the DVD/VCR

Receiver to store the RF channel. The video chan-

nel is now set.

fOSD ON/OFF

To display the operational mode of your

DVD/VCR Receiver (see page 30).

16:9/4:3

To select the aspect ratio of your TV

(see page 28).

OPR

To improve the playback picture (see page 24).

Press CH/PRESET + or – on the DVD/VCR

5 _{Receiver to set the video channel to a vacant}

position between 22 and 68 which is not occu-

pied by any local station in your area.

NIC

To activate or deactivate the NICAM digital sound

(see page 28).

You can also set it to “OFF” if there is any inter-

ference when your TV is connected to the

DVD/VCR Receiver.

Press B or b to select the desired menu.

Press ENTER/OK and press V or v to select.

Press MENU (i) to return to a TV picture.

Note

The RF channel will not change until step 6 has been

executed.

Press @ / 1 to store the new RF channel into the

6 _{DVD/VCR Receiver.}

Note

The VIDEO main menu will appear incorrectly when NTSC

video source is inputted to the DVD/VCR Receiver.

Press @ / 1 to bring the DVD/VCR Receiver from

standby to on and follow your TV manufacturers

tuning instruction manual to tune a new channel

to the DVD/VCR Receiver.

Download from Www.Somanuals.com. All Manuals Search And Download.

VIDEO Operation Setup (Continued)

Tuning in TV Stations Automatically

Tuning in TV Stations Manually

Should you wish to perform the Automatic Channel

Memory System (ACMS) again please follow the guid-

ance given on this page. You may tune up to 88 TV

stations into your DVD/VCR Receiver.

In certain areas of the country broadcast signals may

be too weak for your DVD/VCR Receiver’s automatic

tuning process to find or assign TV stations correctly.

You must tune in these weaker broadcast stations man-

ually in order for your DVD/VCR Receiver to store them.

Press @ / 1 to turn on your DVD/VCR Receiver.

Press MENU (i).

The main menu will appear on the TV screen.

Press MENU (i).

2 _{The main menu will appear on the TV screen.}

3 _ENTER/OK

Press B or b to select PR SET and press

2 _ENTER/OK.

Press B or b to select ACMS and press

C23

MFT

STATION

BBC1

SET

ACMS

Pr-12

ACMS

Press MENU (i) and press V or v to select the

3 _{programme number that you want to tune (for}

example, PR 06). Press ENTER/OK

Press ENTER/OK again to start the automatic

4 _{tuning process.}

C23

C26

C30

C33

C35

- -

BBC1

BBC2

ITV

CH4

CH5

- - - - -

C23

C26

C30

BBC1

BBC2

ITV

- -

MOVE :

DELETE :

SET

OK i

Pr-12

ACMS

While automatic tuning is taking place the time and

5 _{date will set automatically. If - - : - - appears in the}

DVD/VCR Receiver display it means that the broad-

cast signal is weak and the clock was not set.

Please turn to TIME DATE section of this book on

page 18.

C- -

MFT

- -

STATION

SET

Press V or v to find out the station that you

4 _{want to tune and press b.}

C23

C26

C30

C33

C35

- -

BBC1

BBC2

ITV

CH4

CH5

- - - - -

If the frequency number is known, enter the

channel number of station that you want to tune

with the numerical buttons.

- -

MOVE :

DELETE :

SET

Press MENU (i) to remove the menus from the

C40

MFT

STATION

6 _{TV screen.}

CHANNEL/CABLE : AV

SET

Download from Www.Somanuals.com. All Manuals Search And Download.

VIDEO Operation Setup (Continued)

Searching will stop when it locates a station.

5 _{If the station transmits PDC, the station name will}

be added automatically.

Changing the order of TV Stations

After tuning TV stations into your DVD/VCR Receiver

you may wish to change the order in which they are

stored without having to retune them. The instructions

given on this page will show you how you can simply

move them into your desired order.

Control the fine tuning of the station by pressing

V or v.

C40

MFT

STATION

Press MENU (i).

The main menu will appear on the TV screen.

SET

Press B or b to select PR SET and press

ENTER/OK

Press b to select STATION and press

6 _ENTER/OK

The TV station name list will appear.

C23

MFT

STATION

BBC1

Press V or v to select a station name from the

list and press ENTER/OK to select it.

If your station name isn’t on the list do not press

ENTER/OK, but go to stage 7.

SET

Press MENU (i).

2 _{Press V or v to select the programme number}

you want to move (for example, PR 03).

Press b.

BBC1

BBC2

ITV

ANGLI

C40

MFT

BORDE

CH TV

WEST

C23

C26

C30

C33

C35

C40

- -

BBC1

BBC2

ITV

CH4

CH5

CH TV

- - - - -

GRANA

SET

- -

You can change a TV station name manually

rather than using the “standard” names.

SET

Press b and press V or v to select letters and

numbers for the new station name.

Press V or v to select the programme number

3 _{you want to move to (for example, PR 05).}

Press B or b to move back and forth between

characters. Press ENTER/OK

C23

C26

C33

C35

C30

C40

- -

BBC1

BBC2

CH4

CH5

ITV

CH TV

- - - - -

- -

C40

MFT

STATION

CH TV

SET

Press ENTER/OK

4 _{The selected programme will be moved to the new}

programme number.

Press MENU (i), confirm the station placement.

C23

C26

C33

C35

C30

C40

- -

BBC1

BBC2

CH4

CH5

ITV

CH TV

- - - - -

C23

C26

C30

C33

C35

C40

- -

BBC1

BBC2

ITV

CH4

CH5

CH TV

- - - - -

- -

MOVE :

DELETE :

- -

SET

MOVE :

DELETE :

SET

Press MENU (i) to remove the menus from the

5 _{TV screen.}

9 _{TV screen.}

If you wish to move other TV stations repeat stages

1 - 4.

Your new TV station has now been tuned into your

DVD/VCR Receiver.

If you wish to manually tune other stations repeat

stages 1 - 9.

Download from Www.Somanuals.com. All Manuals Search And Download.

VIDEO Operation Setup (Continued)

Deleting TV Stations

Setting the Clock Manually

After tuning TV stations into your DVD/VCR Receiver

you may wish to delete a station.

The instructions given on this page will show you how

to easily delete any unwanted TV stations.

The clock in your DVD/VCR Receiver controls time, day

and date settings for your DVD/VCR Receiver.

For VIDEO Plus+ system to work correctly the cor-

rect time and date must be set. The clock is set auto-

matically during ACMS (Automatic Channel Memory

System) when your DVD/VCR Receiver detects a chan-

nel that broadcasts a Teletext signal.

Press MENU (i).

The main menu will appear on the TV screen.

If the broadcast signal is weak the clock will not be set

and will require setting manually.

Press B or b to select PR SET and press

ENTER/OK

Press MENU (i).

Press B or b to select TIME DATE and press

ENTER/OK

C23

MFT

STATION

BBC1

The auto adjust mode can be set to “OFF” by

pressing V or v if you want to set the time

manually.

SET

Press MENU (i).

2 _{Press V or v to select the programme number}

you want to delete (for example, PR 03).

AUTO ADJUST

- -

C23

C26

C30

C33

C35

C40

BBC1

BBC2

ITV

TIME

DATE

CH4

CH5

CH TV

- -

- - - -

MOVE :

DELETE :

Press ENTER/OK

SET

2 _{Use the numerical buttons or press V/v or B/b}

on the remote control to alter the HOURS,

MINUTES, DAY, MONTH and YEAR.

Press B.

3 _{After a short while, the selected station will be}

Please note your DVD/VCR Receiver uses a

24-hour clock. e.g. 1pm will be displayed as 13:00.

deleted.

The day of the week will appear automatically when

you enter the year.

C23

C26

C33

C35

C40

- -

BBC1

BBC2

CH4

CH5

CH TV

- - - - -

MOVE :

DELETE :

SET

HH MM DD MM YY

- - - - -

- -

TIME

DATE

Press MENU (i) to remove the menus from the

4 _{TV screen.}

If you make a mistake, press B or b and enter

3 _{the correct details.}

If you wish to delete other TV stations repeat

stages 2 - 3.

How to select Stored TV stations:

Stored TV stations can be selected in either of two

ways.

HH MM DD MM YY

7 . 12 . 04 TUE

TIME

DATE

Press CH+ or CH– to select different stations that

are tuned into your DVD/VCR Receiver.

Press MENU (i) to remove the menus from the

You may also directly select stations using the

numerical buttons on the remote control.

4 _{TV screen.}

Your new clock settings are stored and will appear

on your DVD/VCR Receiver’s Display.

Download from Www.Somanuals.com. All Manuals Search And Download.

VIDEO Operation Setup (Continued)

To set the colour system

Your DVD/VCR Receiver is equipped with dual colour

standard, you can play back a tape in PAL and MESE-

CAM.

During playback your DVD/VCR receiver detects the

colour system automatically.

If there is any colour problem please select the colour

system manually.

Press MENU (i).

The main menu will appear on the TV screen.

Press B or b to select the SYSTEM.

A B

Pr-12

ACMS

SYS-

TEM

TIME

REC

OSD

DATE

SYS-

TEM

NIC

OSD

OFF

16:9

4:3

OPR

Press ENTER/OK and press V or v to select

3 _{according to the COLOUR system used.}

A B

AUTO

PAL

Pr-12

ACMS

SYS-

TEM

TIME

REC

OSD

DATE

SYS-

TEM

MESECA_NM_IC

OSD

OFF

16:9

OPR

4:3

AUTO:

Allows PAL or MESECAM signals to be distinguished

automatically.

PAL:

Use when receiving PAL signals or use when playing

back a tape recorded in PAL system.

MESECAM:

Use when receiving MESECAM signals or use when

playing back a tape recorded in MESECAM system

Press MENU (i) to remove the menus from the

4 _{TV screen.}

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Operation Setup

General Explanation

Temporary Feedback Field Icons

TITLE

Repeat Title

This manual gives basic instructions for operating the

DVD/VCR Receiver. Some DVDs require specific opera-

tion or allow only limited operation during playback.

CHAPT

Repeat Chapter

TRACK

Repeat Track (non-PBC Video CDs only)

When this occurs, the symbol

appears on the TV

ALL

Repeat All Tracks (non-PBC Video CDs only)

screen, indicating that the operation is not permitted by

the DVD/VCR Receiver or is not available on the disc.

A—B

Repeat A-B

OFF

Repeat Off

RESUME

On-Screen Display

Resume play from this point

Action prohibited or not available

General playback status can be displayed on the TV

screen. Some items can be changed on the menu.

Notes

ꢀ Some discs may not provide all of the features on the

on-screen display example shown below.

ꢀ If no button is pressed for 10 seconds, the on-screen

display disappears.

On-screen display operation

Press DVD DISPLAY during playback.

Press V/v to select an item.

The selected item will be highlighted.

Press B/b to change the setting of an item.

The number buttons can be also be used for setting

numbers (e.g., title number). For some functions,

press ENTER/OK to execute the setting.

DVD

Items

Function (Press V/v to select desired item)

Selection Method

Title Number

Shows the current title number and total number of titles,

and skips to the desired title number.

b, or

1 /3

1 /12

Numbers, ENTER/OK

Chapter Number

Time search

Shows the current chapter number and total number of

chapters, and skips to the desired chapter number.

Numbers, ENTER/OK

Shows the elapsed playing time, and

searches the point directly from the elapsed time.

0:20:09

Numbers, ENTER/OK

Audio language

and Digital Audio

Output mode

1 ENG

5.1 CH

Shows the current audio soundtrack language,

encoding method, and channel number, and

changes the setting.

b, or

AUDIO

Subtitle language

Shows the current subtitles language, and

changes the setting.

b, or

OFF

1 /1

SUBTITLE

Angle

Shows the current angle number and total number of

angles, and changes the angle number.

b, or

ANGLE

Sound

Shows the current sound mode, and

changes the setting.

b, or

BYPASS

SOUND FIELD

VCD1.1

VCD2.0

Items

Function (Press V/v to select desired item)

Selection Method

Track Number

Shows the current track number, total number of tracks and

PBC On mode, and skips to the desired track number.

b, or

1 /3

Numbers, ENTER/OK

Time

Shows the elapsed playing time (Display only)

0:20:09

–

Audio Channel

Shows the audio channel, and

changes the audio channel.

b, or

AUDIO

Sound

Shows the current sound mode, and

changes the setting.

b, or

BYPASS

SOUND FIELD

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Operation Setup (Continued)

Initial Settings

You can set your personal preferences on the DVD

function mode.

Menu Language

Select a language for the Setup menu. This is the menu

you see when you press SETUP/MENU.

English

Spanish

French

Disc Audio

Disc Subtitle

Disc Menu

Rating

Original

English

Disc Audio

Disc Subtitle

Disc Menu

Rating

German

Italian

French

German

Spanish

Italian

Area Code

TV Aspect

Menu Language

Portuguese

Dutch

Area Code

TV Aspect

Menu Language

Dutch

Polish

Hungarian

Other — — — —

5.1 Speaker Setup

Others

5.1 Speaker Setup

Others

General Operation

Picture

Press SETUP/MENU.

The Setup menu appears.

DVD

TV Aspect

4:3 Letterbox: Select when a standard 4:3 TV is con-

nected. Displays pictures with masking bars above and

below the picture.

4:3 Panscan: Select when a standard 4:3 TV is con-

nected. Displays pictures cropped to fill your TV screen.

Both sides of the picture are cut off.

Use V/v to select the desired option.

The screen will show the current setting for the

selected option, as well as alternate setting(s).

While the desired option is selected, press b,

3 _{then V/v to select the desired setting.}

Press ENTER/OK to confirm your selection.

Some options require additional steps.

16:9 Wide: Select when a 16:9 wide TV is connected.

Press SETUP/MENU, RETURN, or H (PLAY) to

exit the setup menu.

4:3 Letterbox

4:3 Panscan

16:9 Wide

Disc Audio

Disc Subtitle

Disc Menu

Rating

Area Code

TV Aspect

Menu Language

Language

DVD

Disc Language

5.1 Speaker Setup

Others

Select a language for the disc’s Menu, Audio, and

Subtitle features.

Original : The original language set for the disc is selected.

Other : To select another language, use number buttons to

enter the corresponding 4-digit number according to the

language code list on page 42. If you enter the wrong

language code, press CLEAR.

Original

English

Disc Audio

Disc Subtitle

Disc Menu

Rating

French

German

Spanish

Italian

Area Code

TV Aspect

Menu Language

Dutch

Polish

Hungarian

Other — — — —

5.1 Speaker Setup

Others

Note

Disc Language selection may not work for some DVDs.

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Operation Setup (Continued)

Parental Control

DVD

Area Code

Enter the code of an area whose standards were used

to rate the DVD video disc, referring to the list (See

“Area Code List”, page 43.).

Rating DVD

Movies on DVDs may contain scenes not suitable for

children. Therefore, discs may contain Parental Control

information that applies to the complete disc or to

certain scenes on the disc. These scenes are rated

from 1 to 8, and alternatively, more suitable scenes are

available for selection on some discs. Ratings are

country dependent. The Parental Control feature allows

you to prevent discs from being played by your children

or to have certain discs played with alternative scenes.

Disc Audio

Disc Subtitle

Disc Menu

Rating

Code Set

Area Code

TV Aspect

Menu Language

5.1 Speaker Setup

Others

Disc Audio

Disc Subtitle

Disc Menu

Rating

Select the Area Code option using the V/v but-

tons on the setup menu.

Area Code

TV Aspect

Menu Language

While Area Code is selected, press b.

Unlock

Change

Follow step 3 of “Rating” on left.

5.1 Speaker Setup

Others

Select the first character using the V/v buttons.

Press b to shift to second character and select

Select Rating on the Setup menu using V/v

buttons on the setup menu.

While Rating is selected, press b.

5 _{the second character using V/v buttons.}

Press ENTER/OK to confirm your Area Code

Note

selection, then press SETUP/MENU to exit the

menu.

When you have not entered a password yet.

Enter a 4-digit password using the number buttons

to create a personal 4-digit security password, then

press ENTER/OK. Enter the 4-digit password again

and press ENTER/OK to verify.

When you have already entered a password;

Enter a 4-digit password using the numerical

buttons to confirm the personal 4-digit security

password, then press ENTER/OK.

Confirmation of the 4-digit password is necessary when

the password is changed (see Changing the 4-digit

password below ).

Changing the 4-digit password

1 Follow Steps 1-2 as shown above to the left (Rating).

2 Enter the old password, then press ENTER/OK.

3 Select Change using V/v buttons then press

ENTER/OK.

4 Enter the new 4-digit password, then press

ENTER/OK.

5 Enter exactly the same password a second time and

verify by pressing ENTER/OK.

6 Press SETUP/MENU to exit the menu.

If you make a mistake before pressing ENTER/OK, press

CLEAR and enter 4-digit security password again.

Select a rating from 1 to 8 using V/v buttons.

One (1) has the least playback restrictions.

Eight (8) has the most playback restrictions.

Unlock: If you select Unlock, Parental Control is

not active. The disc will play in full.

Ratings 1 to 8: Some discs contain scenes not

suitable for children. If you set a rating for the DVD,

all disc scenes with the same rating or lower will be

played. Higher rated scenes will not be played

unless an alternative scene is available on the disc.

The alternative must have the same rating or a

lower one. If no suitable alternative is found, play-

back will stop. You must enter the 4-digit password

or change the rating level in order to play the disc.

If you forget your 4-digit password

If you forget your password, to clear the current pass-

word follow the procedure below.

1 Press SETUP/MENU to display the setup menu.

2 Enter the 6-digit number “210499”.

The 4-digit password is cleared.

3 Enter a new password as shown above to the left

(Rating).

Press ENTER/OK to confirm your rating selec-

5 _{tion, then press SETUP/MENU to exit the menu.}

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Operation Setup (Continued)

Speaker Setup

5.1 Speaker settings DVD

Select speaker settings, including volume balance and

distance, or test the speaker settings.

Speaker settings are only active on the Analog Multi-

Channel Output. (See “Speaker Setup”, page 38.)

Disc Audio

Disc Subtitle

Disc Menu

Rating

Front L

Volume

Size

Area Code

TV Aspect

Menu Language

0 dB

Small

0.3m

Distance

Test

Return

5.1 Speaker Setup

Others

Others (DRC/PBC)

The DRC and PBC settings can be changed.

ꢀ Press V/v to select the desired item and press

ENTER/OK. The setting of the selected item is

changed between On and Off.

Disc Audio

Disc Subtitle

Disc Menu

Rating

DRC

PBC

Area Code

TV Aspect

Menu Language

5.1 Speaker Setup

Others

Dynamic Range Control (DRC)

With the DVD format, you can hear a program’s sound-

track in the most accurate and realistic presentation

possible, thanks to digital audio technology. However,

you may wish to compress the dynamic range of the

audio output (the difference between the loudest sounds

and the quietest ones). Then, you may listen to a movie

at a lower volume without losing clarity of sound. Set

DRC to On for this effect.

Playback Contrl (PBC)

On: Video CDs with PBC are played according to the PBC.

Off: Video CDs with PBC are played the same way as Audio

CDs.

Download from Www.Somanuals.com. All Manuals Search And Download.

VIDEO Operation

Playing a tape

During playback or still picture press B or b.

5 _{You can reach the following playback speeds.}

(-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay,

7xplay)

You will only be able to load and eject video cassettes

when your DVD/VCR Receiver is plugged into the

mains.

Your DVD/VCR Receiver may also play back recordings

from NTSC tapes (on PAL TV).

To switch off the slow motion and shuttle, press the

desired function.

During slow motion and shuttle, the noise bars may

appear on the picture according to the status of

tape.

Getting a better picture

When a cassette is inserted and playback started, the

ATR (automatic tracking) function works to get the best

possible picture automatically (ATR appears in the dis-

play window). If the quality of the recording is poor,

repeatedly press CH/PRESET (+/–) to manually adjust

the tracking until any distortions have been removed.

If distortions can be seen in the picture, reduce

them with CH/PRESET (+/–) on the remote control.

Press x (STOP) to end playback.

6 _{Press Z VIDEO.}

If the end of the tape is reached, your DVD/VCR

Receiver will stop playback automatically, rewind,

stop at the top of the tape, eject the tape, and it will

turn itself off.

Make sure that you have correctly connected

your DVD/VCR Receiver as described earlier in

this book.

Turn on your TV.

Press @ / 1 to turn on your DVD/VCR Receiver.

Insert the video cassette into your DVD/VCR

Receiver.

The video cassette should have the window side

facing up and the arrow facing away from you.

CM (Commercial Message) Skip:

When playing back tapes, this feature lets you skip

through commercial breaks by fast-forwarding, and

then resume normal playback.

While tape is playing press CM SKIP on the remote

control to skip commercial (or other programme

material).

Repeatedly press CM SKIP to skip:

The tape will fast forward picture search through 30

seconds of recording for each press of the button.

Press H (PLAY) to start playing your tape.

2 _{If you load a video cassette which has had its}

record protection tab removed, playback of the

cassette will start automatically.

AUTO TRACKING

Your DVD/VCR Receiver will automatically adjust

the tracking to give the best picture quality.

1 Press

30 seconds

60 seconds

90 seconds

120 seconds

150 seconds

180 seconds

2 Presses

3 Presses

4 Presses

5 Presses

6 Presses

Press X (PAUSE) to still a picture.

3 _{Press X (PAUSE) repeatedly to advance the}

tape frame by frame.

If you press SLOW (M, T), the picture will be

slowed down at about 1/19 times the normal play-

back.

OPR (Optimum Picture Response):

This feature automatically improves playback picture

quality by adjusting your DVD/VCR Receiver to the

condition of the tape.

Tapes can be paused for up to 5 minutes. After 5

minutes your DVD/VCR Receiver will stop the tape

to prevent from damage to the tape or your

DVD/VCR Receiver.

Still picture quality can be improved slightly by

pressing CH/PRESET (+/–) on the remote control.

Press MENU (i).

Press B or b to select OPR and press

2 _ENTER/OK

Press H (PLAY) to continue playing your tape.

Picture search:

During playback press either SLOW (m/t or

M/T) buttons. This will enable you to rapidly wind

the tape (7 times normal playback) while seeing

where you are on the tape.

A B

OFF

Pr-12

SYS-

TEM

TIME

SET

REC

ACMS

SOFT

OSD

DATE

NIC

OFF

ARP

OPR

16:9

4:3

OPR

Logic search:

Press V or v repeatedly to select: OFF, SOFT or

During fast forward or rewind press and hold SLOW

(m/t or M/T) button. The picture will be played

back at 7 times normal playback speed.

3 _SHARP.

Please note you may set OPR only when playing back

a tape.

Press MENU (i) to remove the menus from the

4 _{TV screen.}

Download from Www.Somanuals.com. All Manuals Search And Download.

VIDEO Operation (Continued)

The DVD/VCR Receiver allows you to make recordings

using a variety of simple methods:

Instant Timer Recording (ITR): Starts recording imme-

diately for a set period of time or until the video cassette

runs out.

Press REC/ITR (z) to start recording.

6 _{RECORD will appear on the TV screen.}

Press REC/ITR (z) several times. Each successive

press will increase the record time by 30 minutes

until you reach a maximum of 9 hours.

VIDEO Plus+ System Recording greatly simplifies

entering the date, channel, start and end times of a

Timer Recording.

Timer Recording: You may record at a later time (up to

1 month from the present). Up to 7 of these

automatic recordings may be set.

Press X (PAUSE) to avoid recording unwanted

scenes.

Press X (PAUSE) to continue recording.

If you press X (PAUSE) during ITR, the DVD/VCR

Receiver will enter the record pause mode and ITR

is cancelled.

Tapes can be paused for up to 5 minutes; RECP

will be displayed when a tape is paused. After 5

minutes your DVD/VCR Receiver will stop recording

to prevent damaging the tape or your DVD/VCR

Receiver.

The DVD/VCR Receiver incorporates Long Play (LP)

which enables you to record up to twice the amount of

time on a video cassette. For example an E-180 will

record up to 180 minutes using Standard Play (SP);

using LP you will be able to record up to 360 minutes.

Please note there will be a slight loss in picture and

sound quality when using LP.

Press x (STOP) to end recording.

8 _{Press Z VIDEO.}

EJECT will appear on the TV screen for a few

seconds.

Instant Timer Recording (ITR)

Notes

ꢀ If you do not wish to record on a tape (this can hap-

pen quite easily by accident!) remove the protection

tab on the back edge of the video cassette.

ꢀ It is possible to record on a video cassette with the

record protection tab removed by covering the hole

with self adhesive tape.

ꢀ Remember you can record one programme while

watching another by starting your instant recording,

pressing TV/VIDEO to disappear VIDEO indicator in

the display window and then selecting a different

channel on your TV.

Make sure that you have correctly connected

your DVD/VCR Receiver as described earlier in

this book.

Press @ / 1 to turn on your DVD/VCR Receiver.

Insert a video cassette with protection tab into

2 _{your DVD/VCR Receiver.}

The video cassette should have the window side

facing up and the arrow facing away from you.

Press CH (+/–) to select the programme number

3 _{you wish to record.}

You may also directly select programme numbers

using the numerical buttons on the remote con-

trol.

If you wish to record directly from either of the

4 _{SCART sockets or AV3 sockets, repeatedly}

press INPUT SELECT until the socket you wish

to record from is displayed.

AV 1 for recording from EURO AV1 socket on the

rear of your DVD/VCR Receiver.

AV 2 for recording from EURO AV2 EXTERNAL

socket on the rear of your DVD/VCR

Receiver.

AV 3 for recording from AV3 sockets (analog audio)

on the front of your DVD/VCR Receiver.

Press SP/LP if you wish to record in Long Play

5 _{or Standard Play.}

SP will produce improved picture and sound quality,

however LP will provide twice as much recording

time as SP.

Download from Www.Somanuals.com. All Manuals Search And Download.

VIDEO Operation (Continued)

VIDEO Plus+^®System recording

BBC1 12

DATE

10:11~11:55

- -: - -~ - -: - -

- -: - -~- - : - -

- -

VIDEO Plus+ System greatly simplifies entering the

date, channel, start and end times of a Timer recording

by simply entering a PlusCode programming number.

The PlusCode programming numbers are published in

most TV guide magazines; they can vary from one to

nine numbers in length.

If you want to record from either of the SCART

sockets or AV3 on the front, repeatedly press

INPUT SELECT for the correct display (AV1, AV2

or AV3).

Make sure that TV channels have been tuned

and stored.

Insert a video cassette with protection tab into

your DVD/VIDEO receiver.

Press G and press D or E to switch PDC on or

6 _off.

The video cassette should have the window side

facing up and the arrow facing away from you.

If you are recording from stations that do not broadcast PDC

switch PDC off! ( * symbol will disappear on the TV screen).

Remember only certain stations transmit PDC.

Press VIDEO PLUS.

BBC1 12

- -

DATE

10:11~11:55

- -: - -~ - -: - -

- -: - -~- - : - -

- -

PDC

- - - - - - - - -

ONCE

VIDEO PLUS+

0~9,

Press G to select the recording speed and press

D or E if you wish to record in SP, IP or LP.

SP will produce improved picture and sound quality, how-

ever LP will provide twice as much recording time as SP.

REC

Press D or E to select the recording type.

3 _{ONCE: To record once.}

WEEKLY: To record at the same time every week.

DAILY: To record every day (except Saturday and

Sunday) at the same time.

Check that the timer event details are correct.

8 _{Press MENU (i) to save your settings.}

If PLEASE CHECK is displayed, you have entered

incorrect information and will need to re-enter the

data.

DATE

BBC1 12

10:11~11:55

- -: - -~ - -: - -

- -: - -~- - : - -

- - - - - - - - -

- -

DAILY

VIDEO PLUS+

0~9,

REC

Press the numerical buttons to enter the

4 _{PlusCode programming number of the TV}

programme that you wish to record.

Press MENU (i) to remove the menus.

9 _{If you want to make other VIDEO Plus+ system}

recordings repeat stages 2 - 8.

If you make a mistake press F then enter the revised

number.

Press @ / 1 to switch your unit to Standby.

10 _{TIMER will appear in the DVD/VIDEO receiver’s}

display while your DVD/VIDEO receiver waits to

make the recording.

123456789

DAILY

0~9,

VIDEO PLUS+

REC

If the DVD/VIDEO receiver is DVD mode, even with

the DVD/VIDEO receiver is power on, it will record

any timer programme. You can clear the recording

by pressing STOP during programmed recording.

Press ENTER (OK).

5 _{The recording details of your programme will be}

displayed.

If PLEASE CHECK is displayed it means that you have

entered the wrong PlusCode programming number,

entered the PlusCode programming number incorrectly or

the PlusCode programming number has been printed

incorrectly in the TV guide. If “- -” is displayed in “PR”, you

have to enter the programme number of the station you

want to record from.

Intelligent LP Recording

When you set the tape speed to “IP”, the DVD/VIDEO

receiver automatically switches to LP mode to allow

complete recording if there is not enough tape to record

the entire programme while timer- recording in SP

mode.

It is not possible to set the tape speed to “IP” with

“PDC” set to “ON”.

Download from Www.Somanuals.com. All Manuals Search And Download.

VIDEO Operation (Continued)

Press the numerical buttons to enter the date of

5 _{the programme.}

Timer recording using On Screen

Display

If you press ENTER/OK before entering the date

you may select one of the following automated

recording features. Press B or b to select, then

press ENTER/OK to confirm.

If you choose not to use VIDEO Plus+ System

Recording, you can set timer recordings manually.

You may set up to seven timer record events within one

month of the current date.

PLEASE NOTE! before setting the timer make sure

that you have set the DVD/VCR Receiver clock cor-

rectly and you know which channels on your

DVD/VCR Receiver you have tuned to TV stations.

In a stage 4, if you want to record from either of the

SCART sockets or AV3 on the front, press INPUT

SELECT.

DLY To record every day (except Saturday and

Sunday) at the same time.

SU - SA To record at the same time every week.

PR01

- -

DATE

- -

- -: - -~ - -: - -

- -: - -~ - -: - - SP

- -: - -~- - : - - SP

DLY SU MO TU WE TH FR SA

Press the numerical buttons to enter the record-

6 _{ing start and end times of the programme that}

you wish to record.

Insert a video cassette with protection tab into

your DVD/VCR Receiver.

The video cassette should have the window side

facing up and the arrow facing away from you.

Please note your DVD/VCR Receiver uses a 24-

hour clock. e.g. 1pm will be displayed as 13:00.

You may also select the start and end times by

pressing V or v.

Press MENU (i).

2 _Press

B or b to select REC and press ENTER/OK

If all timer record events are full press V or v to

select the event that you wish to remove and

replace.

PR01

- -

DATE

- -

19:00~ 20:00

- -: - -~ - -: - -

- -: - -~- - : - -

Press B to delete the event.

DATE

- -

- -: - -~ - -: - -

- -: - -~- - : - -

- -

Press b and press V or v to switch PDC on or

off.

If you are recording from stations that do not broadcast PDC

switch PDC off! ( * symbol will disappear on the TV screen).

Remember only certain stations transmit PDC.

DELETE:

Press ENTER/OK to start setting the timer

3 _{record event.}

Press

to select the recording speed and press

8 _{V or v}

if you wish to record in SP, IP or LP.

• IP (Intelligent LP recording) on page 26.

Check that the timer event details are correct.

9 _{Press MENU (i) to save your settings.}

If PLEASE CHECK is displayed, you have entered

data incorrectly and will need to re-enter the data.

DATE

PR01 16

19:00~20:00

- -: - -~ - -: - -

- -: - -~- - : - -

- -

Press the numerical buttons to enter the station

4 _{that you wish to record.}

When selecting stations 1 - 9, press 0 first, then the chan-

nel number; for example Stations 3 - 03. You may also

select Channels by pressing V or v.

If you want to record from either of the SCART sockets or

AV3 IN on the front, repeatedly press INPUT SELECT for

the correct display (AV1, AV2 or AV3).

Press MENU (i) to remove the menus.

10 _{If you want to make other timer recordings repeat}

stages 2 - 9.

Press @ / 1 to switch your DVD/VCR Receiver to

Standby.

Once selected press b.

PR01

- -

DATE

- -

TIMER will appear in the DVD/VCR Receiver’s dis-

play while your DVD/VCR Receiver waits to make

the recording.

If the DVD/VCR Receiver is DVD mode, even with

the DVD/VCR Receiver is power on, it will record

any timer programme. You can clear the recording

by pressing STOP during programmed recording.

- -: - -~ - -: - -

- -: - -~- - : - -

- -

Download from Www.Somanuals.com. All Manuals Search And Download.

VIDEO Operation (Continued)

Hi-Fi Stereo Sound System

Widescreen Compatibility 16:9

Your DVD/VCR Receiver will record and play back

Hi-Fi stereo sound. In addition it has a NICAM digital

stereo sound decoder. This allows you to record and

play back the sound in several different ways. Video

cassettes recorded on your DVD/VCR Receiver will

have a normal mono audio track and two VHS Hi-Fi

stereo audio tracks. These stereo tracks allow you to

make audio recordings in Hi-Fi stereo or bilingual mode

from a TV broadcast, stereo audio system, video disc or

another Hi-Fi VIDEO.

Your DVD/VCR Receiver can record and play back

widescreen aspect ratio programmes (16:9). To record a

wide screen format programme successfully the correct

type of widescreen signal must be broadcast by the TV

station.

Press MENU (i) and press B or b to select

16:9/4:3.

Press ENTER/OK

Your DVD/VCR Receiver’s NICAM digital sound

decoder allows you to enjoy broadcasts with

A B

Pr-12

ACMS

TIME

SYS-

AUTO

TEM

REC

SET

OSD

^DATEAUTO

NICAM sound, as well as standard stereo

NICAM, bilingual and mono sound.

The particular type of sound received or that

recorded will be briefly displayed on the TV screen

for a couple of seconds:

16:9

4:3

OSD

^NIC4:3

4:3

16:9

4:3

16:9

OFF

OPR

Press V or v repeatedly to select : AUTO, 4:3

2 _{or 16:9.}

AUTO:

Automatically plays back Widescreen programmes as

Widescreen and Normal programmes as normal.

4:3:

Only for playing back and recording Normal format record-

ings (4:3).

STEREO

Sound is automatically recorded on the Hi-Fi stereo

and mono tracks of the video tape.

BIL NICAM

Both audio channels will be recorded on the Hi-Fi

stereo tracks. The primary language channel (left) will

be recorded on the mono track of the video tape.

MONO

16:9:

Only for playing back and recording Widescreen format

recordings (16:9).

The sound is recorded on the Hi-Fi tracks and the

mono track of the video tape without any separation.

Press MENU (i) to remove the menus.

Note

STEREO

To enjoy Widescreen playback you must connect your

DVD/VCR Receiver to the TV using a SCART lead.

Press AUDIO repeatedly until the desired audio

2 _{mode appears.}

The choice is STEREO, LEFT (left channel),

RIGHT (right channel) and MONO.

In BIL NICAM playback the primary language is

output on the left channel and the secondary lan-

guage is output simultaneously from the right chan-

nel when audio output is set to STEREO.

The primary language will be output from both

channels when the audio setting is MONO.

Please note that when adjusting the tracking control

Hi-Fi stereo sound may revert to MONO.

Note

If the quality of stereo sound being received is poor,

the broadcast is automatically received in monaural

with better quality.

Still, if the quality of the sound is poor, set NIC in

the main menu to OFF (see page 15). NICAM broad-

casts will be detected.

Download from Www.Somanuals.com. All Manuals Search And Download.

VIDEO Operation (Continued)

Copying from DVD to VIDEO

Recording from another video recorder

This unit allows you to copy the contents of a DVD to a

VHS tape.

With the DVD/VCR Receiver you can make recordings

from an external source, such as copying from another

VIDEO or a camcorder.

Note

If the DVD you are attempting to copy is copy protected,

you will not be able to copy the disc. It is not permitted

to copy Macrovision encoded DVDs. “LOCK” will blink

on the display window.

Note

In the following description, this DVD/VCR Receiver will

be one used for recording and other VIDEO will be

used for playback.

Insert Disc.

Insert the disc you wish to copy in the DVD deck

and close the disc tray.

VIDEO should be connected to the one of the

SCART sockets on the rear panel of your

DVD/VCR Receiver or the AV3 sockets on the

front panel of your DVD/VCR Receiver.

Insert VHS Tape.

2 _{Insert a blank VHS video tape into the VIDEO deck.}

Press INPUT SELECT until the socket you wish

Press H (PLAY) on the DVD deck.

3 _{The DVD will go into play mode}

2 _{to record from is displayed.}

AV1 Sound and Picture recording using the lower

EURO AV1 socket on the back of your DVD/VCR

Receiver.

ꢀ If the DVD disc menu appears, you may need to press

the H (PLAY) manually to begin copying.

Press REC/ITR (z).

4 _{The DVD/VCR Receiver will go into Record mode.}

AV2 Sound and Picture recording using the upper

EURO AV2 EXTERNAL socket on the back of your

DVD/VCR Receiver.

AV3 Sound and Picture recording from AV3 IN

sockets (analog audio) on the front of your

DVD/VCR Receiver.

Stop the Copy Process.

5 _{When the DVD is finished playing, press x (STOP)}

to end the copy.

You must stop the Copy process manually when the

DVD movie ends, or the unit may replay and record

over and over again.

Insert the recorded tape into VIDEO and a blank

3 _{tape into DVD/VCR Receiver.}

To start recording, press REC/ITR (z) on

4 _{DVD/VCR Receiver and press H (PLAY) on}

VIDEO.

Note

If you try to copy a disc with NTSC disc, the recording

will not be recorded correctly because this DVD/VCR

Receiver’s color system is PAL.

When you want to finish copying,

5 _{press the x (STOP) on both appliances.}

Press x (STOP) at DVD/VCR Receiver.

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional Information

If Timer record events Overlap...

On Screen Display (OSD)

Do not overlap programmes, since overlapping portions

of the conflicting programmes will not be recorded.

Earlier recording times have priority over later recording

times as shown in the diagram.

You may easily display the clock or tape counter and

tape remaining, day, month, year, day of week,

programme channel, tape speed and VIDEO function

on the TV screen.

If a recording is taking place these On Screen Displays

will not be recorded onto the tape.

16:00

17:00

18:00

Case A:

Press DVD DISPLAY (CLK/CNT) to display.

Program 1

Program 2

Press DVD DISPLAY (CLK/CNT) repeatedly to

2 _{display the tape counter.}

Case B:

VIDEO

Program 1

Programme

STOP

TF1

STEREO

NICAM

Function/

STEREO

Channel

Tape Speed

Program 2

Clock/Tape

Counter &

Tape

Day/Month/

Year/Day of

Week

1. 01. 03 WED

12:00

Case C:

remaining

Program 1

Program 2

During playback or recording, the tape remaining is

displayed with the tape counter.

: This potion will not be recorded.

After 3 seconds the display will clear from the

3 _{TV screen, leaving only the clock or tape count-}

er and tape remaining on the TV screen.

Press DVD DISPLAY (CLK/CNT) again to remove

all displays from the TV screen.

Change (Deleting) the Timer Programme

If at a later date you wish to delete or change any of

the settings in timer event memory you may do so with-

out having to enter all the timer event information again.

The tape remaining will only be accurate for E-180

and E-240 tapes.

Simply display the timer event screen. Press V or v to

select the event that you wish to delete or change.

Press B to delete the event...or

Press ENTER/OK to change; then press V or v to

select; Station, Date, Start and End times, PDC and LP.

Press V or v to enter the correct information.

The tape remaining indicator may not be accurate,

since it depends on the type or condition of tape

used. Also, the tape remaining indicator is not dis-

played just after a cassette has been inserted, or

after playback or recording has begun.

The Programme Delivery Control (PDC)

The Programme Delivery Control (PDC) adjusts the

start and end times of a timer record event. This can be

particularly useful with sports events which may run

over into extra time. The PDC signal is transmitted by

the broadcaster and this controls your video recorder’s

timer.

Currently only a limited number of TV companies trans-

mit PDC signals.

Please make sure that when recording from chan-

nels that do not broadcast PDC that you turn PDC

OFF.

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD and Video CD Operation

Playing a DVD and Video CD

Tip

To play from the beginning of the disc, press x twice, then

Playback Setup DVD

VCD2.0

VCD1.1

press H.

ꢀ

Turn on the TV and select the video input source con-

nected to the DVD/VCR Receiver.

Audio system: Turn on the audio system and select the

input source connected to the DVD/VCR Receiver.

Set the Output Source to DVD as shown in Selecting the

Output/Input Source on page 13.

Notes

ꢀ

Depending on where you stopped the disc, the recorder

may not resume playback from exactly the same point.

The point where you stopped playing is cleared when:

- Press x in the STOP mode.

ꢀ

1 /3

Press A DVD to open the disc tray.

Selecting Another TITLE DVD

If a disc has more than one title, you can select another

title as follows:

Place a disc on the tray, with the label facing up.

When a double-sided DVD is inserted, make sure the

side you want to play is facing down.

ꢀ

Press DVD DISPLAY, then press the appropriate num-

ber buttons (0-9).

Press A DVD to close the tray.

ꢀ

Press DVD DISPLAY, then use B/b to select a title num-

ber, then press ENTER/OK.

“READING” appears in the display window, and play-

back starts automatically. If playback does not start,

press H (PLAY).

Selecting Another CHAPTER/TRACK

In some cases, the disc menu might appear instead.

1 /12

1 /3

VCD1.1

If a menu screen is displayed

DVD

VCD2.0

A menu screen may appear automatically after loading a

DVD.

If a title on a disc has more than one chapter or a disc has

more than one track, you can move to another

chapter/track as follows:

DVD

ꢀ

Press . or > briefly during playback to return to

the beginning of the current chapter/track or to select the

next chapter/track.

Use B/b/V/v buttons to select the title/chapter you want to

view, then press ENTER/OK to start playback.

Press DVD TOP MENU or DVD MENU to return to the

menu screen.

ꢀ

Press . twice briefly to step back to the previous

chapter/track.

VCD2.0

To go directly to any chapter during playback,

press DVD DISPLAY. Use V/v to select chapter/track

icon. Then, enter the chapter/track number with the num-

ber buttons (0-9). or use B/b to select chapter then,

press ENTER/OK.

ꢀ

Use the number buttons to select the track you want to

view. Press RETURN to return to the menu screen.

Menu setting and the exact operating procedures for

using the menu may differ depending on the disc. Follow

the instructions on the each menu screen.

ꢀ

Notes

ꢀ

You also may set PBC to Off under setup. See page 23.

For two-digit numbers, press the number buttons

(0-9) in rapid succession.

On a Video CD with PBC, you must set PBC to Off on

the setup menu to use this function. See page 23.

Notes

ꢀ

If Parental Control is set and the disc is not within the

ꢀ

Rating settings (not authorized), the 4-digit password

must be entered and/or the disc must be authorized (see

Parental Control, on page 22).

VCD2.0

VCD1.1

Search DVD

1 Press m or M for about two seconds during play-

back.

The DVD/VCR Receiver will now go into SEARCH mode.

2 Press m or M repeatedly to select the required

speed: X2 b, 1 m, 2 m, 3 m (backward) or

X2 B, 1 M, 2 M, 3 M (forward).

ꢀ

DVDs may have a Region Code.

Your DVD/VCR Receiver will not play discs that have a

Region Code different from your DVD/VCR Receiver.

The Region Code for this DVD/VCR Receiver is 2 (two).

Do not keep a fixed image displayed on the screen for a

long time.

ꢀ

With a Video CD, the Search speed changes: 1 m, 2

m, 3 m (backward) or 1 M, 2 M, 3 M (forward).

3 To return to playback, press H (PLAY).

General Features

Note

VCD2.0

VCD1.1

Still Picture DVD

Unless stated otherwise, all operations described use the

remote control. Some features may also be available on

the Setup menu.

1 Press X (PAUSE) during playback.

The DVD/VCR Receiver will go into PAUSE mode.

2 To return to playback, press X (PAUSE) again or H

(PLAY).

VCD2.0 VCD1.1

DVD

Resuming Playback

When you stop the disc. the player remembers the point

where you pressed x (STOP) and “RESUME x” appears

on the TV screen. Press H (PLAY) and play will resume

from this point.

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD and Video CD Operation (Continued)

Notes

ꢀ

General Features (Continued)

On a Video CD with PBC, you must set PBC to Off on

the setup menu to use the Repeat function. See page

23.

VCD2.0

VCD1.1

Slow Motion DVD

1 Press X (PAUSE) during playback.

The DVD/VCR Receiver will now go into PAUSE

mode.

ꢀ By pressing > during Random playback, the unit

selects another title and resumes Random playback.

ꢀ When you press . twice or > during Repeat

mode to go to previous track or next track, repeat

mode is canceled.

2 Press SLOW t or T during pause mode.

The DVD/VCR Receiver will enter SLOW mode.

3 Use SLOW t or T to select the required speed:

4 t, 3 t, 2 t or 1 t (backward), or 4 T, 3 T,

2 T or 1 T (forward).

VCD2.0

VCD1.1

Repeat A-B DVD

A—B

4 To return to playback, press H (PLAY).

To repeat a sequence in a title(track):

Note

Slow motion playback in reverse is not applicable for

Video CD.

1 During disc playback, Press A-B at your chosen start

point.

“A * ” appears briefly on the TV screen.

2 Press A-B again at your chosen end point.

“A B” appears briefly on the TV screen, and the repeat

sequence begins.

3 To cancel the sequence and return to normal play,

press A-B.

VCD2.0

VCD1.1

Shuffle Karaoke DVD

1 Press SHUFFLE during playback or in Stop mode.

The unit automatically begins Shuffle Playback and

“SHUFFLE” appears on the TV screen.

Note

Repeat A-B play may not work with some scene of the

DVD.

2 To return to normal playback, press SHUFFLE until

“NORMAL” appears on the TV screen.

Tip

-:--:--

0:20:09

Time Search DVD

By pressing > during Shuffle playback, the unit

selects another title (track) and resumes Shuffle play-

back.

The Time Search function allows you to start playing at

any chosen time on the disc.

Notes

ꢀ This function only works with DVD Karaoke discs and

Video CD without PBC.

ꢀ On a Video CD with PBC, you must set PBC to Off on

the setup menu to use the Shuffle function. See page

23.

1 Press DVD DISPLAY during playback. The on-screen

display appears on the screen.

The Time Search box shows the elapsed playing time of the

current disc.

2 Within 10 seconds, use V/v to select the Time Search

icon in the on-screen display.

The “-:--:--” appears in the Time Search box.

ꢀ After finishing the Shuffle playback mode, Shuffle

function is canceled.

3 Within 10 seconds, use the number buttons to enter

the required start time. Enter hours, minutes and sec-

onds from left to right in the box.

If you enter the wrong numbers, press CLEAR to remove the

numbers you entered. Then enter the correct numbers.

4 Within 10 seconds, press ENTER/OK.

VCD2.0

VCD1.1

Repeat

DVD

DVD Video Discs - Repeat Chapter/Title/Off

1 Press REPEAT when playing a disc.

The Repeat icon appears on the TV screen.

Playback starts from the selected time on the disc. If you enter

an invalid time, playback will continue from the current point.

2 Press REPEAT to select a desired repeat mode.

CHAPT

TITLE

OFF

VCD2.0 VCD1.1

3D Surround DVD

3D SUR

BYPASS

• CHAPT: repeats the current chapter.

• TITLE: repeats the current title on a disc.

• OFF: does not play repeatedly.

This unit can produce a 3D Surround effect, which

simulates multi-channel audio playback from two

conventional stereo speakers, instead of the five or

more speakers normally required to listen to multi-

channel audio from a home theatre system.

Video CDs - Repeat Track/All/Off

1 Press REPEAT when playing a disc.

The Repeat icon appears on the TV screen.

2 Press REPEAT to select a desired repeat mode.

1 Press SOUND FIELD to select “3D SUR” during

playback.

2 To turn off the 3D Surround effect, press SOUND

FIELD again to select “BYPASS”.

ALL

TRACK

OFF

Note

On DVD, you can select “3D SUR” only during playing

2 channel audio.

• TRACK: repeats the current track

• ALL: repeats all the tracks on a disc.

• OFF: does not play repeatedly.

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD and Video CD Operation (Continued)

Screen Saver

The screen saver picture appears when you leave the

DVD/VCR Receiver in Stop mode for about 5 minutes.

Special DVD Features

Checking the contents of DVD Video

discs: Menus

DVDs may contain menus that allow you to access spe-

cial features. To use the disc menu, press DVD DIS-

PLAY. Then, press the appropriate number button to

select an option. Or, use B/b/V/v buttons to highlight

your selection, then press ENTER/OK.

DVD

Title Menu

1 Press DVD TOP MENU.

If the current title has a menu, the menu will appear on the

screen. Otherwise, the disc menu may appear.

2 The menu can list camera angles, spoken language

and subtitle options, and chapters for the title.

3 To remove the title menu, press DVD TOP MENU

again.

DVD

DVD Menu

1 Press DVD MENU.

The disc menu is displayed.

2 To remove the disc menu, press DVD MENU again.

1 /1

DVD

Camera Angle

If the disc contains sequences recorded from different

camera angles, the angle icon appears on the TV

screen. You can then change the camera angle if you

wish.

ꢀ

Press ANGLE repeatedly during playback to select a

desired angle.

The number of the current angle appears on the display.

Changing the Audio Language

1 ENG

DVD

5.1 CH

Press AUDIO repeatedly during playback to hear a

different audio language or audio track.

VCD2.0

VCD1.1

Changing the Audio Channel

LEFT

RIGHT

Press AUDIO repeatedly during playback to hear a dif-

ferent audio channel (ST, LEFT or RIGHT).

1 ENG

DVD

Subtitle

Press SUBTITLE repeatedly during playback to see the

different subtitle languages.

Note

If appears, the feature at that moment or with that

specific DVD.

Download from Www.Somanuals.com. All Manuals Search And Download.

Audio CD and MP3 Disc Operation

Playing an Audio CD and MP3

Notes on MP3 Files

MP3

Disc

About MP3

ꢀ An MP3 file is audio data compressed by using the

MPEG1 audio layer-3 file-coding scheme. We call

files that have the “.mp3” file extension “MP3 files”.

ꢀ The DVD/VCR Receiver can not read an MP3 file

that has a file extension other than “.mp3”.

The DVD/VCR Receiver can play MP3 formatted

recordings on CD-ROM, CD-R or CD-RW discs.

Before playing MP3 disc, read the notes on MP3 files

on right.

Insert a disc and close the tray.

Audio CD: Audio CD menu appears on the TV

screen go to step 4.

MP3 disc: The MP3/JPEG select menu appears on

the TV screen. Go to step 2

MP3 Disc compatibility with this DVD/VCR

Receiver is limited as follows:

ꢀ Sampling Frequency : only at 44.1kHz

ꢀ Bit rate : within 32 - 320kbps

MP3

ꢀ CD-R physical format should be “ISO 9660”

ꢀ If you record MP3 files using the software which can-

not create a FILE SYSTEM, for example “UDF” etc.,

it is impossible to playback MP3 files. We recom-

mend that you use an ISO9660 file system.

ꢀ A single session disc requires MP3 files in the first

track. If there is no MP3 file in the 1st track, it cannot

playback MP3 files. If you wish to playback MP3

files, format all the data in the disc or use a new one.

ꢀ File names should be named using 8 letters or less

and must incorporate “.mp3” extension

JPEG

Use V/v to select the MP3 then press

ENTER/OK.

The MP3 disc Menu appears on the TV screen.

Press RETURN to move to the MP3/JPEG select

menu.

Program

MP3

Folder1

Folder2

Folder3

Folder4

Folder5

Folder6

Folder7

Folder8

e.g. “********.mp3”.

Clear All

OFF

ꢀ Do not use special letters such as “/ : * ? “ < > ” etc.

ꢀ Total number of files on the disc should be less than

650.

00:00

Use V/v to select a folder, and ENTER/OK.

A list of files in the folder appears.

If a list of files contains another folder, repeat step 3

once more.

This DVD/VCR Receiver requires discs/recordings to

meet certain technical standards in order to achieve

optimal playback quality. Pre-recorded DVDs are auto-

matically set to these standards. There are many differ-

ent types of recordable disc formats (including CD-R

containing MP3 files). That require certain pre-existing

conditions (see above) to insure compatible playback.

Tip

If you are in a file list and want to return to the Folder

list, use the V/v to highlight and press ENTER/OK to

return to the previous menu screen.

Customers should also note that permission is

required in order to download MP3 files and music

from the Internet. Our company has no right to

grant such permission. Permission should always

be sought from the copyright owner.

Use V/v to select a track then press H (PLAY)

or ENTER/OK.

Playback starts.

During playback, the current track’s elapsed playing

time will appear in the display window and menu.

Playback will stop at the end of the disc.

Press DVD TOP MENU to move to the next page.

Press DVD MENU to move to the previous page.

Program

MP3

TRACK01

FILE 1

TRACK02

TRACK03

TRACK04

TRACK05

TRACK06

TRACK07

TRACK08

FILE 2

FILE 3

FILE 4

FILE 5

FILE 6

FILE 7

FILE 8

Clear All

OFF

Clear All

BYPASS

0: 56: 18

00:00

Audio CD Menu

MP3 disc Menu

press x (STOP) to stop playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

Audio CD and MP3 Disc Operation (Continued)

MP3

Pause

Repeat

1 Press X (PAUSE) during playback.

1 Press REPEAT when playing a disc.

The Repeat icon appears on the TV screen.

2 Press REPEAT to select a desired repeat mode.

2 To return to playback, press X (PAUSE) again or

press H (PLAY).

ALL

TRACK

OFF

MP3

Selecting Another Track

If a disc has more than one track, you can move to

another track as follows:

• TRACK: repeats the current track

• ALL: repeats all the tracks on a disc.

• OFF: does not play repeatedly.

ꢀ Press . or > briefly during playback to go to the

next track or to return to the beginning of the current

track.

Note

ꢀ Press . twice briefly to step back to the previous

track.

When you press . twice or > during Repeat mode

to go to previous track or next track, repeat mode is

canceled.

ꢀ On Audio CDs, to go directly to any track, enter the

track number using the number buttons (0-9) during

playback.

Repeat A-B

To repeat a sequence in a track.

1 During disc playback, press A-B at your chosen start-

ing point.

Note

For two-digit numbers, press the number buttons (0-9)

in rapid succession.

The Repeat icon and “ * ” appears on the menu screen.

2 Press A-B again at your chosen end point.

“A B” appears on the menu screen, and the repeat

sequence begins.

MP3

1 Press m or M for about two seconds during

playback.

The DVD/VCR Receiver will now go into SEARCH mode.

3 To cancel the sequence and return to normal play,

press A-B again.

The Repeat icon and “OFF” appears on the menu screen.

2 Press m or M repeatedly to select the required

speed: 1 m, 2 m, 3 m (backward) or 1 M, 2

M, 3 M (forward).

Search speed and direction are indicated on the menu

screen.

3D Surround

This unit can produce a 3D Surround effect, which

simulates multi-channel audio playback from two

conventional stereo speakers, instead of the five or

more speakers normally required to listen to multi-

channel audio from a home theatre system.

3 To return to playback, press H (PLAY).

MP3

Shuffle

1 Press SOUND FIELD to select “3D SUR” during play-

back.

1 Press SHUFFLE during playback or in Stop mode.

The unit automatically begins Shuffle Playback and

“SHUFFLE” and “SHUF” appears in the display

window and menu screen.

2 To turn off the 3D Surround effect, press SOUND

FIELD again to select “BYPASS”.

2 To return to normal playback, press SHUFFLE

repeatedly until “SHUFFLE” and “SHUF” disappears

from the display window and menu screen.

Changing the Audio Channel

Press AUDIO repeatedly during playback to hear a

different audio channel (ST, LEFT, or RIGHT).

Tip

By pressing > during Shuffle playback, the unit

selects another track and resumes Shuffle playback.

Note

After finishing the Shuffle playback mode, Shuffle func-

tion is canceled.

Download from Www.Somanuals.com. All Manuals Search And Download.

JPEG File Operation

JPEG

Selecting another Files

Viewing JPEG Files on a Disc

Press . or > once while viewing a picture to

advance to the next file or to the previous file.

This DVD/VCR Receiver can play discs with JPEG files.

Before playing JPEG files, read the notes on JPEG

Files on right.

Still Picture

Insert a disc and close the tray.

The MP3/JPEG select menu appears on the TV

screen.

1 Press X (PAUSE) during slide show.

The DVD/VCR Receiver will now go into PAUSE

mode.

MP3

2 To return to the slide show, press H (PLAY) or

X (PAUSE) again.

JPEG

Use V/v to select the JPEG then press

ENTER/OK.

The JPEG menu appears on the TV screen.

To flip the picture

Press V/v while showing a picture to flip the

picture horizontally or a vertically.

JPEG

Folder1

Folder2

Folder3

Folder4

Folder5

Folder6

Folder7

Folder8

To rotate picture

Press B/b while showing a picture to rotate the

picture clockwise or counter clockwise.

Off

Slide Speed

To record the picture slide show

Use V/v to select a folder, and ENTER/OK.

A list of files in the folder appears.

Press RETURN to move to the MP3/JPEG select

menu.

Press z REC/ITR to record.

Notes on JPEG Files

Tip

If you are in a file list and want to return to the Folder

ꢀ Depending upon the size and number of the JPEG

files, it could take a long time for the DVD/VCR

Receiver to read the disc’s contents. If you don’t see

an on-screen display after several minutes, some of

the files are too big — reduce the resolution of the

JPEG files to less than 2 mega pixels and burn anoth-

er disc.

list, use the V/v buttons on the remote to highlight

“

menu screen.

and press ENTER/OK to return to the previous

”

Use V/v to select a file then press ENTER/OK or

4 _{H (PLAY).}

ꢀ Total number of files and folders on the disc should

be less than 650.

Viewing the file function starts.

While viewing a file, press RETURN to move to the

previous menu (JPEG menu).

Press DVD TOP MENU to move to the next page.

Press DVD MENU to move to the previous page.

ꢀ Some disc may be incompatible due to different

recording format or condition of disc.

ꢀ If the files have “.jpe” or “.jpeg” extensions, please

rename them as “.jpg” files.

Folder1

JPEG

Picture1.jpg

Picture2.jpg

Picture3.jpg

Picture4.jpg

Picture5.jpg

Picture6.jpg

Picture7.jpg

ꢀ File names without “.jpg” extension will not be able to

be read by this DVD/VCR Receiver, even though the

files are shown as JPEG image files in windows

explorer.

Off

5/32

1024X768

Slide Speed

5/32

1024X768 Picture5.jpg

Tip

There are three viewing Slide Speed options: Fast,

Normal, Slow, and Off. Use B/b to highlight the Slide

Speed then use V/v to select the option you want to

use, and press ENTER/OK.

Press x (STOP) to stop viewing.

The JPEG menu appears.

Download from Www.Somanuals.com. All Manuals Search And Download.

VCD2.0

VCD1.1

MP3

Programmed Playback

Programmed Playback with Audio CD

and MP3 Disc

Programmed Playback with Video CD

Note

On a Video CD with PBC, you must set PBC to Off on the

setup menu to use the Program function. See page 23.

The Program function enables you to store your favorite

tracks from any disc in the DVD/VCR Receiver memory.

Insert Video CD and close the tray.

Program can contain 30 tracks.

Press PROGRAM during playback or in the stop

mode to enter the Program Edit mode.

Press PROGRAM while playback is stopped.

The VCD Program menu will appear.

Press RETURN, PROGRAM or H (PLAY) to exit the

Program menu.

The mark will appear to the right of the word

Program on the right side of the menu screen.

Note

Press PROGRAM to exit the Program Edit mode;

Follow steps 2-6 of “Programmed Playback with

Audio CD and MP3 disc” on left.

“PGM” and “PROGRAM” appears in the display window

and TV screen.

the

mark will disappear.

Select a track, then press ENTER/OK to place

the selected track on the Program list.

Program

VCD

TRACK 1

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

Repeat step 2 to place additional tracks on the

Program list.

Clear All

TRACK 8

Program

MP3

TRACK 1

TRACK 12

TRACK 8

TRACK 10

TRACK 3

FILE 8

FILE 2

FILE 4

FILE 3

FILE 1

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

TRACK 8

FILE 2

FILE 3

FILE 4

FILE 5

FILE 6

FILE 7

FILE 8

To return normal playback from

4 _{programmed playback, press PROGRAM.}

Clear All

BYPASS

Clear All

OFF

“PGM” indicator disappears in the display window.

0: 56: 18

00:00

Repeat Programmed Tracks

Audio CD menu

MP3 disc Menu

1 Press REPEAT when playing the programmed tracks.

The Repeat icon appears on the TV screen.

2 Press REPEAT to select a desired repeat mode.

Press b.

The programmed track you selected last is highlighted on

the program list.

ALL

TRACK

OFF

Press V/v to select the track you want to start

playing.

Press DVD TOP MENU to move to the next page.

Press DVD MENU to move to the previous page.

• TRACK: repeats the current track

• ALL: repeats all tracks on the program list.

• OFF: does not play repeatedly.

Press H (PLAY) or ENTER/OK to start.

Playback begins in the order in which you programmed

the tracks and “PGM” appears on the menu screen.

Playback stops after all of the tracks on the Program list

have played once.

Erasing a Track from Program List

1 Press PROGRAM during playback (Audio CD and

MP3 disc only) or stop to enter the Program Edit

mode.

To return normal playback from pro-

grammed playback, press PROGRAM to

exit the Program Edit mode. Select a track

of CD (or MP3) list and then press

ENTER/OK or H (PLAY).

“PGM” indicator disappears in the display window.

The

mark will appear.

2 Press b to move to the Program list.

3 Use V/v to select the track that you wish to erase

from the Program list.

4 Press CLEAR.

The track will be erased from the Program list.

Erasing the whole Program List

1 Follow steps 1-2 of “Erasing a Track from Program

List” as above.

2 Use V/v to select “Clear All”, then press ENTER/OK.

The complete Program for the disc will be erased

Notes

ꢀ The programs are cleared when the disc is removed.

ꢀ The programs are cleared when another function mode

(VIDEO, radio etc.) is selected.

Download from Www.Somanuals.com. All Manuals Search And Download.

Speaker Setup

You can set your personal preferences on the DVD func-

tion mode.

Distance

If you connected speakers to your DVD/VCR Receiver,

setting the Distance lets the speakers (except sub-

woofer) know how far the sound has to travel to reach

your set listening point. This allows the sound from each

speaker to reach the listener at the same time.

(1 - 20 ft, 1 ft = 0.30 m)

Adjust the following settings for the built-in 5.1 channel

surround decoder.

Disc Audio

Disc Subtitle

Disc Menu

Rating

Front L

Volume

Size

Note

You can not set the distance of subwoofer speaker.

Area Code

TV Aspect

Menu Language

0 dB

Small

0.3m

Distance

Test

Return

Test

5.1 Speaker Setup

Others

Press ENTER/OK to test the signals of each speaker.

Adjust the volume to match the volume of test signals

memorized in the system.

ꢀ Front Left (L) → Center → Front Right (R) →

Rear Right (R) → Rear Left (L) → Subwoofer

Press SETUP/MENU.

The Setup menu appears.

Select “5.1 Speaker Setup” using the V/v

buttons on the setup menu.

You can stop the test using V/v.

While “5.1 Speaker Setup” is selected,

3 _{press b button.}

Return

Press b buttons to select the desired speaker.

Press ENTER/OK to return to the previous menu.

Adjust options by using V/v/B/b buttons.

Speaker selection

Select a speaker that you want to adjust. ((Front speak-

er (Left), Front speaker (Right), Center Speaker, Rear

speaker (Left), Rear speaker (Right), or Subwoofer))

Note

Certain speaker settings are prohibited by the Dolby

Digital licensing agreement.

Volume

Press B / b to adjust the output level of the selected

speaker. (-6dB ~ 6dB)

Size

Since the speaker settings are fixed, you cannot change

the settings.

ꢀ Subwoofer’s size is fixed “Large” and the other

speaker’s size are fixed “small”.

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio Operation

Presetting the Radio Stations

Listening to the Radio

You can preset 30 stations for FM and AM. Before tun-

ing, make sure that you have turned down the volume.

Preset radio stations in the DVD/VCR Receiver memory

first (see “Presetting radio stations” on the left).

Notes

ꢀ The On Screen Display for radio is not appeared

when:

• the TIMER appears in the display window.

• the DVD/VCR Receiver in recording mode.

Press TUNER FM/AM on the remote control until

the frequency band appears on the display and

TV screen.

The last received station is tuned in.

Press PRESET (+/–) on the remote control

2 _{repeatedly to select the preset station you want.}

Press TUNER FM/AM on the remote control until

the frequency band appears on the display and

TV screen.

Each time you press the button, the DVD/VCR Receiver

tunes in one preset station at a time.

Adjust the volume by rotating VOLUME on the

3 _{front panel or by pressing VOL + or - on the}

remote control repeatedly.

TUNER 03

FM 87. 55MHZ

To Clear the Stored Radio

Stations

MEMORY, CLEAR

Press PRESET (+/–) on the remote control to

2 _{select your desired radio channel.}

Press TUNER FM/AM on the remote control until

the frequency band appears on the display and

TV screen.

TUNER 06

FM 108. 00MHZ

TUNER 06

FM 108. 00MHZ

MEMORY, CLEAR

Press TUNER FM/AM on the remote control to

3 _{select the desired band.}

Press PRESET (+/–) on the remote control to

2 _{select your desired station.}

Hold down TUNING (+/–) on the remote control

4 _{for 1 or 2 seconds, and a station is searched for}

automatically.

TUNER 05

FM 103. 00MHZ

TUNER 07

FM 87. 50MHZ

MEMORY, CLEAR

Press CLEAR the remote control to clear the

3 _{stored radio station.}

Press MEMORY on the remote control.

TUNER 04

FM 87.50MHZ

Repeat steps 2 to 5 to store other stations.

MEMORY, CLEAR

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio Operation (Continued)

Tuning into a Station Manually

RDS Operation

This unit is equipped with RDS (Radio Data System),

which brings a wide range of information to FM radio.

Now in use in many countries, RDS is a system for

transmitting station call signs or network information, a

description of station programme type text message

about the station or specifics of musical selection and

the correct time.

Press TUNER FM/AM on the remote control until

the frequency band appears on the display and

TV screen.

Press TUNER FM/AM on the remote control to

2 _{select the desired band.}

Press TUNING (+/–) on the remote control to

3 _{tune in the desired station.}

RDS Tuning

When a FM station is tuned in and it contains RDS

data, the unit will automatically display the station’s call

sign and the RDS indicator will light in the Display

Window as well as indicators for the RDS services pro-

gramme (PS) if transmitted by the station.

For your reference

Weak FM stations

“STEREO” may flash when the weak FM stereo signal

is received, select another station.

RDS Display

To turn off the radio

Press @ / 1 to turn the DVD/VCR Receiver off or select

another function mode (DVD or VIDEO).

The RDS system is capable of transmitting a wide vari-

ety of information in addition to the initial call sign that

appears when a station is first tuned. In normal RDS

operation the display will indicate the station name.

Pressing RDS on the remote control enables you to

show the station name.

Tuning into a Station Automatically

Hold down TUNING (+/–) on the remote control for 1 or

2 seconds, and a station is searched for automatically.

Note

If the RDS services programme (PS) is not being trans-

mitted, the Display Window will show a PS NONE mes-

sage.

Note

The search may not stop at a station with a very weak

signal.

Muting

Press MUTING to mute your unit.

You can mute your unit in order, for example, to answer

the telephone, MUTING appear in the display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Controlling the TV with the Supplied Remote

By adjusting the remote signal, you can control your TV

with the supplied remote.

Code numbers of controllable TVs

If more than one code number is listed, try entering

them one at a time until you find the one that works with

your TV.

Notes

ꢀ If you enter a new code number, the code number

previously entered will be erased.

ꢀ When you replace the batteries of the remote, the

code number may be reset to the default (SONY)

setting. Reset the appropriate code number.

Manufacturer

SONY

Code Number

501

AIWA

553, 501

DAEWOO

FISHER

504, 505, 506, 507, 515, 544

Controlling TVs with the remote

508

GOLDSTAR/LG

GRUNDIG

HITACHI

503, 511, 512, 515, 534, 544

517, 534

Press and hold TV @ / 1 while entering your TV’s

manufacturer’s code (see the table) using the num-

ber buttons and press ENTER/OK. Then release

TV @ / 1.

513, 514, 515, 544

516

JVC

TV @ / 1

MAGNAVOX

503, 518, 544

MITSUBISHI/MGA 503, 519, 544

NEC

503, 520, 544

509, 524

PANASONIC

PHILIPS

515, 518

TV VOL +/–

PIONEER

RCA/PROSCAN

SAMSUNG

SANYO

509, 525, 526, 540

510, 527, 528, 529, 544

503, 515, 531, 532, 533, 534, 544

508, 545, 546, 547

535

TV CH +/–

TV/VIDEO

SHARP

Number Buttons

TELEFUNKEN

THOMSON

TOSHIBA

ZENITH

523, 536, 537, 538

537, 539

535, 540, 541

542, 543

Controlling the TV

ENTER/OK

You can control your TV using the buttons below.

By pressing

TV @ / 1

You can

Turn the TV on or off.

TV/VIDEO

Switch the TV’s input source

between the TV and other input

sources.

Note

Depending on the TV, you may not be able to control

your TV or to use some of the buttons above.

Download from Www.Somanuals.com. All Manuals Search And Download.

Language Code List

Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu”

(See page 21).

Code Language

6566

6565

6570

8381

6577

6582

7289

6583

6588

6590

6665

6985

6678

6890

6672

6682

6671

7789

6669

7577

6765

9072

6779

7282

6783

6865

7876

6978

6979

6984

7079

Abkhazian

Afar

7074

7073

7082

7089

7176

7565

6869

6976

7576

7178

7185

7265

7387

7273

7285

7383

7378

7365

7165

7384

7465

7487

7578

7583

7575

7589

7579

7585

7679

7665

7686

Fiji

7678

7684

7775

7771

7783

7776

7784

7773

7782

7779

7778

7865

7869

7879

7982

8065

8083

7065

8076

8084

8185

8277

8279

8285

8377

8365

7168

8382

8372

8378

8368

Lingala

8373

8375

8376

8379

6983

8385

8387

8386

8476

8471

8465

8484

8469

8472

6679

8473

8479

8482

8475

8487

8575

8582

8590

8673

8679

6789

8779

8872

7473

8979

9085

Singhalese

Slovak

Slovenian

Somali

Spanish

Sudanese

Swahili

Swedish

Tagalog

Tajik

Finnish

Lithuanian

Macedonian

Malagasy

Malay

Afrikaans

Albanian

Ameharic

Arabic

French

Frisian

Galician

Georgian

German

Greek

Malayalam

Maltese

Armenian

Assamese

Aymara

Maori

Greenlandic

Guarani

Gujarati

Hausa

Marathi

Azerbaijani

Bashkir

Moldavian

Mongolian

Nauru

Tamil

Basque

Tatar

Bengali; Bangla

Bhutani

Hebrew

Hindi

Nepali

Telugu

Thai

Norwegian

Oriya

Bihari

Hungarian

Icelandic

Indonesian

Interlingua

Irish

Tibetan

Tigrinya

Tonga

Breton

Panjabi

Bulgarian

Burmese

Byelorussian

Cambodian

Catalan

Pashto, Pushto

Persian

Turkish

Turkmen

Twi

Polish

Italian

Portuguese

Quechua

Rhaeto-Romance

Rumanian

Russian

Japanese

Javanese

Kannada

Kashmiri

Kazakh

Kirghiz

Ukrainian

Urdu

Chinese

Corsican

Croatian

Czech

Uzbek

Vietnamese

Volapük

Welsh

Samoan

Sanskrit

Danish

Dutch

Korean

Scots Gaelic

Serbian

Wolof

English

Kurdish

Laothian

Latin

Xhosa

Esperanto

Estonian

Faroese

Serbo-Croatian

Shona

Yiddish

Yoruba

Zulu

Latvian, Lettish

Sindhi

Download from Www.Somanuals.com. All Manuals Search And Download.

Area Code List

Enter the appropriate code number for the initial setting “Area Code” (See page 22).

Code Country

Andorra

Eritrea

Saint Lucia

Liechtenstein

Sri Lanka

Liberia

Seychelles

Sudan

United Arab Emirates

Afghanistan

Antigua and Barbuda

Anguilla

Spain

Ethiopia

Sweden

Finland

Singapore

Fiji

Lesotho

Saint Helena

Slovenia

Albania

Falkland Islands

Micronesia

Faroe Islands

France

Lithuania

Armenia

Luxembourg

Latvia

Svalbard and Jan Mayen

Islands

Netherlands Antilles

Angola

Libya

Slovak Republic

Sierra Leone

San Marino

Senegal

Antarctica

Argentina

France (European

Territory)

Morocco

Monaco

American Samoa

Austria

Gabon

Moldavia

Great Britain

Grenada

Madagascar

Marshall Islands

Macedonia

Mali

Somalia

Australia

Suriname

Aruba

Georgia

Saint Tome and Principe

Former USSR

El Salvador

Syria

Azerbaidjan

Bosnia-Herzegovina

Barbados

French Guyana

Ghana

Myanmar

Mongolia

Gibraltar

Bangladesh

Belgium

Greenland

Gambia

Macau

Swaziland

Northern Mariana Islands

Martinique (French)

Mauritania

Montserrat

Malta

Turks and Caicos Islands

Chad

Burkina Faso

Bulgaria

Guinea

Guadeloupe (French)

Equatorial Guinea

Greece

French Southern

Territories

Bahrain

Burundi

Togo

Benin

S. Georgia & S. Sandwich

Isls.

Mauritius

Thailand

Bermuda

Maldives

Tadjikistan

Tokelau

Brunei Darussalam

Bolivia

Guatemala

Guam (USA)

Guinea Bissau

Guyana

MW Malawi

Mexico

Turkmenistan

Tunisia

Brazil

Malaysia

Bahamas

Mozambique

Namibia

Tonga

Bhutan

Hong Kong

Heard and McDonald

Islands

East Timor

Turkey

Bouvet Island

Botswana

New Caledonia (French)

Niger

Trinidad and Tobago

Tuvalu

Belarus

Honduras

Croatia

Norfolk Island

Nigeria

Belize

Taiwan

Canada

Haiti

Nicaragua

Netherlands

Norway

Tanzania

Cocos (Keeling) Islands

Central African Republic

Congo

Hungary

Ukraine

Indonesia

Ireland

Uganda

Nepal

United Kingdom

USA Minor Outlying

Islands

Switzerland

Ivory Coast

Cook Islands

Chile

Israel

Nauru

India

Niue

British Indian Ocean

Territory

New Zealand

Oman

United States

Uruguay

Cameroon

China

Iraq

Panama

Uzbekistan

Vatican City State

Saint Vincent &

Grenadines

Venezuela

Virgin Islands (British)

Virgin Islands (USA)

Vietnam

Iran

Peru

Colombia

Iceland

Polynesia (French)

Papua New Guinea

Philippines

Pakistan

Costa Rica

Former Czechoslovakia

Cuba

Italy

Jamaica

Jordan

Cape Verde

Christmas Island

Cyprus

Japan

Poland

Kenya

Saint Pierre and Miquelon

Pitcairn Island

Puerto Rico

Portugal

Kyrgyzstan

Cambodia6

Kiribati

Vanuatu

Czech Republic

Germany

Wallis and Futuna Islands

Samoa

Djibouti

Comoros

Saint Kitts & Nevis Anguilla

North Korea

South Korea

Kuwait

Palau

Yemen

Denmark

Paraguay

Mayotte

Dominica

Qatar

Yugoslavia

South Africa

Zambia

Dominican Republic

Algeria

Reunion (French)

Romania

Ecuador

Cayman Islands

Kazakhstan

Laos

Russian Federation

Rwanda

Zaire

Estonia

Zimbabwe

Egypt

Saudi Arabia

Solomon Islands

Western Sahara

Lebanon

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Check the following guide for the possible cause of a problem before contacting service.

Cause

Correction

Symptom

No power.

ꢀ The power cord is disconnected.

ꢀ Plug the power cord into the wall outlet

securely.

ꢀ No disc is inserted.

ꢀ No tape is inserted.

ꢀ Insert a disc or tape. (Check that the

disc or tape indicator in the display

window is lit.)

The power is on, but

the DVD/VCR Receiver

does not work.

ꢀ The TV is not set to receive DVD/VCR

Receiver signal output.

ꢀ Select the appropriate video input mode

on the TV so the picture from the

DVD/VCR Receiver appears on the TV

screen.

No picture.

ꢀ TV/VIDEO mode for DVD/VCR

Receiver is set to TV.

ꢀ Press the TV/VIDEO button on the

remote control repeatedly to choose

VIDEO mode. TV indicator disappears

in the display window.

ꢀ The video cable is not connected

securely.

ꢀ Connect the video cable securely.

ꢀ The connected TV power is turned off.

ꢀ Turn on the TV.

ꢀ The equipment connected with the

audio cable is not set to receive

DVD/VCR Receiver signal output.

ꢀ Select the correct input mode on the

audio receiver so you can listen to the

sound from the DVD/VCR receiver.

No sound.

ꢀ The audio cables are not connected

securely.

ꢀ Connect the audio cables securely.

ꢀ The power of the equipment connected

with the audio cables is turned off.

ꢀ Turn on the equipment connected with

the audio cables.

ꢀ The disc is dirty.

ꢀ Clean the disc.

The playback picture is

poor.

ꢀ Tape heads are dirty.

ꢀ Clean video heads.

ꢀ Tape is a rental or was recorded on

another VIDEO.

ꢀ Use CH/PRESET (+/–) for manual track-

ing adjustment while tape is playing.

The DVD/VCR Receiver ^ꢀNo disc is inserted.

does not start playback. ꢀ No tape is inserted.

ꢀ Insert a disc or tape. (Check that the

disc or tape indicator in the display

window is lit.)

ꢀ An unplayable disc is inserted.

ꢀ Insert a playable disc. (Check the disc

type, color system, and Regional code.)

ꢀ The disc is placed upside down.

ꢀ

Place the disc with the playback side down.

ꢀ The disc is not placed within the guide.

ꢀ Place the disc on the disc tray correctly

inside the guide.

ꢀ The disc is dirty.

ꢀ Clean the disc.

ꢀ The Rating level is set.

ꢀ Cancel the Rating function or change

the rating level.

Forward Skip is not avail-

able during DVD playback.

ꢀ Move to next title using DVD on-screen

display (See page 20).

ꢀ The current chapter is last of the current

title.

The remote control

does not work properly.

ꢀ Point the remote control at the remote

sensor of the DVD/VCR Receiver.

ꢀ The remote control is not pointed at the

remote sensor of the DVD/VCR Receiver.

ꢀ Operate the remote control within 7 m

(23 ft).

ꢀ The remote control is too far from the

DVD/VCR Receiver.

ꢀ Remove the obstacle.

ꢀ There is an obstacle in the path of the remote

control and the DVD/VCR Receiver.

ꢀ Replace the batteries with new ones.

ꢀ The batteries in the remote control are

exhausted.

ꢀ When using a VIDEO, first press the

VIDEO button. When using a DVD, first

press the DVD button.

ꢀ This remote control uses the same

buttons for VIDEO and DVD functions

(ex. PLAY).

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting (Continued)

Cause

Correction

Symptom

ꢀ The DVD/VCR Receiver is in the

RECORD PAUSE MODE.

ꢀ Press X (PAUSE) to resume recording.

The tape does not run

during recording.

ꢀ The tape is already fully rewound or

fast-forwarded.

ꢀ Check the tape.

The tape will not rewind

or fast-forward.

ꢀ If you’re using only the RF cable for

connection.

ꢀ Set the TV to the Video channel (see

page 15).

The playback picture

does not appear while

the tape is running.

ꢀ This is normal.

ꢀ Turn camcorder on and operate proper-

ly.

Noise appears during

visual search.

ꢀ The automatic tracking mode is

engaged.

ꢀ Try manual tracking (see page 24).

Noise appears during

normal playback.

ꢀ The automatic tracking mode is

engaged.

ꢀ Try manual tracking (see page 24).

Breaks are noticeable

in Hi-Fi soundtrack.

ꢀ There is no tape loaded, or the tape

loaded has had its record safety tab

removed.

ꢀ Insert a tape, or using adhesive tape,

cover the hole where the tab was

removed.

Recording cannot be

started.

ꢀ DVD and VIDEO is working

simultaneously.

ꢀ Set the function mode to VIDEO mode

by pressing DVD/VCR on the front

panel or VIDEO on the remote control.

Press x (STOP) to stop the working

then press REC.

ꢀ

The source (another VIDEO, camcorder)

has not been properly connected.

ꢀ Confirm that the camcorder is properly

connected.

Tape-to-tape editing is

not possible.

ꢀ The clock/or the timer have been set

incorrectly.

ꢀ Re-perform the clock and/or timer set-

tings.

Timer recording won’t

work.

ꢀ Press @ / 1 and confirm that the timer

indicator is displayed on the DVD/VCR

Receiver’s Display.

ꢀ The timer is not engaged.

ꢀ Insert a pate with adhesive tape, or

insert a tape with the record safety tab

intact.

ꢀ The loaded tape has had its record

safety tab removed.

ꢀ Incorrect the VIDEO Plus+ programming ꢀ Re-enter the VIDEO Plus+ programming

number.

PLEASE CHECK appears

when entering VIDEO

Plus+ programming

number.

ꢀ Select “STEREO” by repeatedly press-

ing AUDIO on the remote control.

ꢀ Audio mode is not set properly.

No Hi-Fi sound.

ꢀ Make sure NIC in the menu is set to

“AUTO” for the station to be recorded.

ꢀ NICAM mode is not set properly.

No NICAM sound

recording.

Moisture Condensation

Moisture condensation can occur:

In locations where moisture condensation may occur:

• When the DVD/VCR Receiver is moved from a cold

place to a warm place.

• Keep the DVD/VCR Receiver plugged into an AC

power outlet with POWER On. This will help prevent

condensation.

• Under extremely humid conditions.

• When condensation has occurred, wait a few hours

for the DVD/VCR Receiver to dry before using it.

Video Head Cleaning

The dirt accumulating on the head after a long period of time can cause the playback picture to become blurred or

broken up. High quality video cassette tapes will not normally deposit dirt onto the video head, but old or damaged

tapes might.

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

General

(AVD-K150G)

Power requirements

AC 230 V , 50/60 Hz

Power consumption

Dimensions (approx.)

Mass (approx.)

74W

430 x 98 x 386 mm (17 x 3 ⁷/8 x 15 ¹/4 inches) (W x H x D)

6.5 kg (14 lb 6 oz)

Operating temperature

Operating humidity

5˚C to 35˚C (41˚F to 95˚F)

5 % to 90 %

DVD Section

Laser

Signal system

Semiconductor laser (Wavelength DVD: 650nm, CD: 780nm)

PAL

Frequency response

DVD (PCM 48 kHz): 10 Hz to 22 kHz

CD: 10 Hz to 20 kHz

Signal-to-noise ratio

Harmonic distortion

More than 80 dB (ANALOG OUT connectors only)

Less than 0.05%

VIDEO Section

Head system

4 heads helical scan azimuth system

PAL I colour system

Television system

Recording format

RF Modulator

PAL

UHF 22-68 (Adjustable)

Tape speed

PAL/MESECAM; 23.39 mm/s (SP), 16.69 mm/s (LP)

SP: 4 hour (E-240 tape), LP: 8 hour (E-240 tape)

About 180 seconds (E-180 tape)

Maximum recording time

Rewind time

Input level

VIDEO: 1.0 V(p-p), 75 ohms, unbalanced

AUDIO: -6.0 dBm, more than 10 kohms (SCART)

-6.0 dBm, more than 47 kohms (RCA)

DIGITAL AUDIO IN: Optical connector x 1

VIDEO: 1.0 V(p-p), 75 ohms, unbalanced

Output level

FM Tuner

Tuning Range

Intermediate Frequency

87.5 - 108.0 MHz

10.7 MHz

AM Tuner

Tuning Range

522 - 1,611 kHz

450 kHz

Intermediate Frequency

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications (Continued)

Amplifier Section

Stereo mode

70W + 70W (6Ω at 1 kHz, THD 10 %)

Surround mode

Front: 70W/ch (6Ω at 1 kHz, THD 10 %)

Center*: 70W (6Ω at 1 kHz, THD 10 %)

Surround*: 70W/ch (6Ω at 1 kHz, THD 10 %)

Subwoofer*: 100W (4Ω at 30 Hz, THD 10 %)

Depending on the sound mode settings and the source, there may be no sound output.

Inputs

AV 2, AV 3, OPTICAL IN (AV3 OPT)

Speaker Section

Front/Center/Surround speakers (SS-MSP661)

Speaker system

Full range, Magnetically shielded

Speaker units

80 mm cone type

Enclosure type

Bass reflex

Rated Impedance

Dimensions (w/h/d) (Approx.)

Mass (Approx.)

6 ohms

120 x 122 x 100 mm (4 ⁶/8 x 4 ⁷/8 x 4 inches)

0.8 kg (1 lb 13 oz)

Subwoofer (SS-WMSP700)

Speaker system

Magnetically shielded

Speaker units

200 mm cone type

Enclosure type

Acoustically loaded bass reflex

Rated Impedance

Dimensions (w/h/d) (Approx.)

Mass (Approx.)

4 ohms

270 x 325 x 333 mm (10 ⁶/8 x 12 ⁷/8 x 13 ¹/8 inches) including front panel

6.5 kg (14 lb 6 oz)

Accessories

Scart cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Speaker color label . . . . . . . . . . . . . . . . . . . . . . . . . .1

AM loop antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Ferrite Core . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

RF 75-ohm Coaxial Cable . . . . . . . . . . . . . . . . . . . .1

Speaker cables . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Speaker foot (for satellite speaker) . . . . . . . . . . . . .20

FM antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

^ꢀDesign and specifications are subject to change without notice.

ꢀ

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks

^ꢀDTS and DTS Digital Surround are registered trademarks of Digital Theatre Systems, Inc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Sony Corporation

Printed in Indonesia

http://www.sony.net

Download from Www.Somanuals.com. All Manuals Search And Download.

Sharp PDAs Smartphones ZQ P20A User Manual
Snapper Lawn Mower 1690583 User Manual
Soleus Air Water Heater HM1 10R 32 User Manual
Sony Cassette Player TCM 343 User Manual
Sony Microcassette Recorder TCM 465 User Manual
Sony Portable CD Player MZ E510 User Manual
Sony Speaker XS W5721 User Manual
Sony Stereo System STRDG1200 User Manual
Spirit Elliptical Trainer XE 125 User Manual
StarTechcom Computer Drive ecusb3s22 User Manual