3-252-232-71(1)
SonicStage
Simple Burner
Ver. 1.0
Operating Instructions
© 2003 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Other information
Table of contents
Various settings........................................ 23
Selecting the recording mode .............. 23
Setting a CD-R/RW drive .................... 23
Viewing version information ............... 24
Viewing CDDB information.................... 25
Confirming CD information registered
in the CDDB ..................................... 25
Sending CD information to
the CDDB ......................................... 25
Settings according to OS and
precautions .......................................... 26
Settings according to OS ..................... 26
For users with OpenMG Jukebox,
SonicStage, or SonicStage Premium
installed on their computer ............... 27
Uninstalling the software......................... 29
For Windows XP users ........................ 29
For Windows Millennium Edition/
Windows 98 Second Edition users ... 30
For Windows 2000 users ..................... 30
Troubleshooting ....................................... 31
If the installation was not successful ... 32
Tracks do not appear on the display .... 32
You cannot record a CD on
a CD-R/RW. ...................................... 33
The time left for additional recording
on a CD-R/RW is too short. ............. 33
Recording was unsuccessful.
(You cannot play back the CD-R/RW
you created on your CD player.) ...... 34
You cannot use the SonicStage
Getting started
What you can do with the SonicStage
Simple Burner software......................... 4
What is the ATRAC3plus? .................... 6
What is the ATRAC3? ........................... 6
Providing the required system
environment ........................................... 7
Installing the software ............................... 8
Before installing the software ............... 8
Installing the SonicStage
Simple Burner Ver. 1.0 ....................... 9
Using the software for the first time ........ 10
Before starting up the software ........... 10
Registering with the CDDB® .............. 10
Checking the reading capability of the
CD-R/RW drive ................................ 13
Starting up the SonicStage
Simple Burner ..................................... 14
Recording on CD-Rs/RWs
1 Selecting the tracks or files and making a
disc image to be recorded .................... 15
Selecting tracks from an audio CD ..... 16
Selecting tracks from among
MP3 files .......................................... 17
2 Editing a disc image to be recorded ... 19
Adding names...................................... 19
Changing the order of tracks or
groups ............................................... 20
Creating a new group .......................... 20
Erasing tracks or groups ...................... 20
3 Recording a disc image on
Simple Burner. .................................. 34
a CD-R/RW ......................................... 21
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
What you can do with the SonicStage
Simple Burner software
This software allows you to record music tracks from an audio CD as well as record MP3 files
on a CD-R/RW, using the ATRAC3plus/ATRAC3 format.
Create a disc image.
1
Select tracks from Audio CDs or MP3
files.
Edit a disc image.
2
From Audio CDs
You can attach names, change the
Select the CD tab.
order of tracks or groups, make a new
group or delete unnecessary tracks
or groups.
Click
The disc image
From MP3 files
Select the MP3 tab.
Click
Note
Once you have recorded audio data on a CD-R/
RW, you cannot change it. Edit audio data you
want to record here in step 2.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoy your own CD on an
ATRAC CD Walkman.
Burn a CD-R/RW.
3
You can record audio data on a CD-R/
RW.
Click
Notes
• Use CD-Rs/RWs of 650 MB or 700 MB only. If
you use other types of CD-Rs/RWs, you may not
be able to record tracks or files successfully.
• You cannot record on a CD-R/RW where audio
data has already been recorded using software
other than the ATRAC CD burner software such
as SonicStage Simple Burner. Make sure that
you use a new CD-R/RW or a CD-R/RW where
audio data has been recorded using the ATRAC
CD burner software.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
What is the ATRAC3plus?
“ATRAC3plus,” which stands for “Adaptive Transform Acoustic Coding3plus” is audio
compression technology, developed from the ATRAC3 format. Though the ATRAC3plus
format can compress music contents to about 1/20 of its original size, you can still enjoy high
quality sound.
ATRAC3plus 64 kbps: The best recording mode for ATRAC CD Walkman because this
mode satisfies the demand for high sound quality and high
compression rate.
Maximum number of tracks recordable on a CD-R/RW is approx.
360*.
ATRAC3plus 48 kbps: Use to record a large number of tracks or files.
Maximum number of tracks recordable on a CD-R/RW is approx.
490*.
* When recording 4-minute tracks on a blank 700 MB CD-R/RW.
What is the ATRAC3?
“ATRAC3,” which stands for “Adaptive Transform Acoustic Coding3” is audio compression
technology that satisfies the demand for high sound quality and high compression rates. The
ATRAC3 format can compress music content to about 1/10 of their original size, which
contributes to reduction of the media volume.
ATRAC3 132 kbps: High quality recording mode.
Maximum number of tracks recordable on a CD-R/RW is approx. 170*.
ATRAC3 105 kbps: Maximum number of tracks recordable on a CD-R/RW is approx. 220*.
ATRAC3 66 kbps: Maximum number of tracks recordable on a CD-R/RW is approx. 350*.
* When recording 4-minute tracks on a blank 700 MB CD-R/RW.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Providing the required system
environment
The following hardware and software are required in order to use the SonicStage Simple Burner
software.
Computer
IBM PC/AT or Compatible
• CPU: Pentium II 300 MHz or higher (Pentium III 600 MHz or higher is
recommended.)
• Hard disk drive space: 200 MB or more (The amount of free space
required differs according to the size of the audio files that you want to
handle. 1.5GB of free space or more is recommended.)
• RAM: 64 MB or higher (128 MB or higher is recommended)
Others
• CD-R/RW drive (capable of digital playback by
WDM)
• Sound Board
Operating System Factory installed:
Windows XP Home Edition/Windows XP Professional/Windows
Millennium Edition/Windows 2000 Professional/Windows 98 Second
Edition
Display
Others
High Color (16 bit) or greater, 800 × 600 dots or more
• Internet access: for Web registration and CDDB* services
• Adobe Acrobat Reader installed for viewing the online help
* See page 10.
This software is not supported by the following environments:
•
•
•
•
•
•
•
•
•
•
NEC PC-98 series or compatible machines, Macintosh systems
Windows XP versions other than Home Edition or Professional
Windows 2000 versions other than Professional
Windows 98 versions other than Second Edition
Windows NT
Windows 95
Personally constructed PCs or operating systems
An environment that is an upgrade of the original manufacturer-installed operating system
Multi-boot environment
Multi-monitor environment
Notes
• We do not ensure trouble-free operation on all computers that satisfy the system requirements.
• We do not ensure trouble-free operation of the system suspend, sleep, or hibernation function on all
computers.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the software
Install the SonicStage Simple Burner software on the hard disk drive of your computer.
Before installing the software
1 Close all other Windows applications before starting the installation.
Make sure to close any virus-check software, as such software application usually demands
large amounts of system resources.
2 If the following operating system or software is installed on your computer, refer to
the reference pages before installing the software.
• To install the SonicStage Simple Burner software,
you must log on as “Computer Administrator.”
Windows XP
tpage 26
• To install the SonicStage Simple Burner software,
you must log on as “Administrator.”
Windows 2000
tpage 26
• Depending on the version of the software you have
installed, the software will be updated or upgraded
by the SonicStage Simple Burner.
OpenMG Jukebox and/or
SonicStage
tpage 27
Note
For Windows XP or Windows Millennium Edition users
If you use the “System Restore” function in “System Tools,” the SonicStage Simple Burner may not run
properly. An error dialog box may appear. If this occurs, follow the instructions given in the messages
displayed.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the SonicStage Simple Burner Ver. 1.0
1
Turn on your computer and start up Windows.
2
Insert the installation CD-ROM for the SonicStage Simple Burner into the CD-
ROM drive of your computer.
The setup program starts up automatically
and the SonicStage Simple Burner Ver.
1.0 installation window appears.
3
Follow the displayed instructions.
After the installation* is completed, click [Restart] to restart the computer.
* The installation may take 20 to 30 minutes, depending on your system environment.
Was the installation successful ?
If any trouble occurs during the installation, see “Troubleshooting” (page 32).
Notes
• The SonicStage Simple Burner uses the installed folders. Do not delete, move or change the contents of the
installed folders.
• While the installation is still in progress, do not interrupt the operation or take the CD-ROM out of the CD-
ROM drive. Doing so may render it impossible to install the software thereafter.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the software for the first time
Before starting up the software
Check that the CD-R/RW drive is connected to your computer securely.
If you connect the drive after starting the software, your computer may not recognize the CD-R/
RW drive.
Note
The SonicStage Simple Burner software cannot be used with certain CD-R/RW drives. To prevent damaging
your data unexpectedly, you can check with the Simple Drive Checker software to see if your CD-R/RW
drive is usable for recording using the SonicStage Simple Burner software.
To check the suitability of the drive
You cannot start the SonicStage Simple Burner and the Simple Drive Checker at the same time. To use the
drive checking software, make sure to close the SonicStage Simple Burner first.
To start the Simple Drive Checker software, click the [Start] menu–[All Programs] (or [Program])–
[SonicStage Simple Burner]–[Simple Drive Checker].
Registering with the CDDB®
The Gracenote CDDB® is the Internet service for audio data recognition. A number of album
names, artist names, track names, etc. have been registered on this data base. When you connect
your computer to the Internet and use the SonicStage Simple Burner, your computer will search
the CDDB automatically when you insert an audio CD into the CD-R/RW drive. The computer
imports CD information such as album names to the hard disc and displays this information.
This is more convenient than inputting album names, track names, etc. using the keyboard.
To use the CD information on the CDDB, register with the CDDB following the instructions
that appear when you start the SonicStage Simple Burner for the first time.
Note
To use the Gracenote CDDB service, you have to register with the Gracenote CDDB. The registration is done
between the Client and the Gracenote CDDB. Sony assumes no responsibility for this matter.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
Start up the SonicStage Simple Burner and insert an audio CD into the CD-R/
RW drive of your computer. (page 14).
The CDDB registration window appears.
If you start up the software with an audio CD inserted in the CD-R/RW drive, the “CD
Drive Check” dialog box appears. If you follow the instructions displayed (page 13), the
CDDB registration window appears when the check is completed.
Select [This is a new CDDB Registration] and click [Next].
3
If you agree to the terms of use, select [I have read and agree to these Terms of
Use] and click [Next].
Continued
11
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
6
Input the information required for registration, such as a user nickname.
Input a “user nickname” and a
“password.” Input your “password” again
for confirmation. Also input some words
as a password hint in case you ever forget
your password. If you input your mail
address, your password will be sent to
you.
Click [Next].
Click [Next].
If you want to receive special offers or
promotions (free of charge) from the
CDDB, check the box.
If you decide you do not want this
service, you can turn it off at any time.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
7
8
Fill in the text boxes, and click [Next].
Click [Finish].
Registration with the CDDB has been
completed and the “CD Drive Check”
dialog box appears. Check the CD-R/RW
drive.
If you have already checked your drive
before starting the CDDB registration,
you do not need to check it again.
Checking the reading capability of the CD-R/RW
drive
Click [Start].
The software starts to check if the drive
connected to your computer is able to read
audio data properly.
Make sure to check your CD-R/RW drive.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting up the SonicStage Simple
Burner
Do one of the following:
•
•
Double click the SonicStage Simple Burner icon on the display.
Select [Start]–[All Programs] (or [Program])–[SonicStage Simple Burner]–[SonicStage
Simple Burner].
The SonicStage Simple Burner starts up and the main window appears.
To quit the software
Click the [X] button on the upper right side of the window.
Note
Do not start up the SonicStage Simple Burner and other CD-R/RW burner software/OpenMG software
(SonicStage, OpenMG Jukebox, etc.) at the same time on your computer.
If the icon of any other CD-R/RW burner software is displayed in the task tray, close that software.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording on CD-Rs/RWs
1 Selecting the tracks or files and
making a disc image to be recorded
Select the tracks you want to record from an Audio CD and/or from among MP3 files.
Tracks from an audio CD and those from MP3 files can co-exist in one disc image. You can
record them on the same CD-R/RW at the same time.
Audio CD
Click
The disc image to
be recorded
MP3 file
Click
Notes
• A disc image is made based on the recording mode set up in the “CONFIG” window. If necessary, change
the settings in the CONFIG window before making a disc image (page 23).
• If you close the software before recording on a CD-R/RW, the disc image you were just working on is
cancelled.
• The maximum number of groups you can make: 255
• The maximum number of burning times (the number of sessions) on one CD-R/RW: 99
• This software uses approx.14 MB of overhead per recording (over and above the space used for recording
the tracks themselves).
Continued
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting tracks from an audio CD
CD tab
Check boxes
ADD
(check all)
(clear all)
1
Insert an audio CD into the CD-R/RW drive of your computer.
Click the [CD] tab.
If you are online and have registered with the CDDB, the disc information (track names,
etc.) appears automatically (page 10).
2
3
4
Click the check marks of the tracks you do not want to record so that the check
marks disappear from the boxes.
If you click and select a track, you can play that track by clicking N on the display.
Click ADD.
The selected tracks are converted to the
ATRAC3plus/ATRAC3 format and
appear in the ATRAC CD frame. A new
group is created and the selected tracks
are included in the group.
A disc image is made but not yet recorded
on the CD-R/RW. If you want to edit
these tracks in the group (changing
names, changing the order of tracks, or
erasing unnecessary tracks), perform
those operations in this step. For details,
refer to “2 Editing a disc image to be
recorded.” (page 19)
The disc image to be
recorded
If you want to record MP3 files on the
same CD-R/RW, select and add MP3 files
at this time.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting tracks from among MP3 files
[OPEN] (selecting a folder)
(for moving up to the group
above)
[MP3] tab
Check boxes
ADD
(check all)
(clear all)
Specifications of the MP3 files supported by this software
•
•
•
•
Sampling frequencies: 44.1/48/32 kHz
Channels: stereo, joint stereo, dual channel and monaural
Transfer bit rate: 32/40/48/56/64/80/96/112/128/160/192/224/256/320 kbps
Version of ID3 tag: 1.1/2.2/2.3
Note
This software is not compatible with MP3 VBR or MP3 Pro files. Do not select them for recording.
1
2
Click the [MP3] tab.
Click [OPEN] (selecting a folder) so that the list of folders appears on the
display and select a folder.
All the files in the selected folder appear
in the MP3 frame.
Continued
17
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Click the check marks of the tracks you do not want to record so that the check
marks disappear from the boxes.
If you click and select a file, you can play
that file by clicking N on the display.
Click ADD.
The selected groups and files appear in
the ATRAC CD frame.
A disc image is made but not yet recorded
on the CD-R/RW. If you want to edit
these groups or files (changing names,
changing the order of groups/files or
erasing unnecessary groups/files),
perform those operations on this step. For
details, refer to “2 Editing a disc image to
be recorded.” (page 19)
If you want to record an audio CD on the
same CD-R/RW, select and add tracks
from an audio CD at this time.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Editing a disc image to be recorded
Edit the image of tracks or files (the disc image) you have made in the ATRAC CD frame.
Notes
• Once you have recorded audio data on a CD-R/RW, you cannot change it. Edit it before recording.
• You cannot play an ATRAC CD using the SonicStage Simple Burner software.
Remaining space indication*
The space left
The amount to be
recorded
The amount already
recorded
The tracks/files already
recorded are masked.
(cannot be changed)
* If you want to record on an ATRAC CD on which audio data has already been recorded, insert it into the
CD-R/RW drive before editing the disc image. The remaining space on the ATRAC CD and a list of the
recorded tracks and groups appear in the ATRAC CD frame.
Adding names
Click the track in the disc image you want to edit.
Click the track name, artist name or album name and type in the name.
You can also edit track names, artist names or album names that appear in the CD frame or the
MP3 frame.
Note
The maximum number of characters you can input is 62.
Continued
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the order of tracks or groups
Click and select the track or group you want to change, and drag and drop it to the destination
point on the display.
You can also move the track to a different group using the same procedure.
Creating a new group
Click [New Group].
A new group is added at the end of the current listing.
Note
The maximum number of characters you can input is 62.
Erasing tracks or groups
Click and select the track or group you want to erase, and click [Delete].
If you delete a group, all tracks in the group are erased.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Recording a disc image on a CD-R/RW
BURN
The disc image to be recorded
[Disc info]
1
2
Confirm the disc image to be recorded.
Once audio data is recorded on a CD-R/RW, you cannot edit it.
Note
Once you start recording by clicking
BURN, you cannot cancel it.
Insert a CD-R/RW into a CD-R/RW drive of your computer.
Notes
• Use CD-Rs/RWs of 650 MB or 700 MB only. If you use other types of CD-Rs/RWs, you may not be
able to record tracks or files successfully.
• You cannot record on a CD-R/RW where audio data has already been recorded using software other
than the ATRAC CD burner software such as SonicStage Simple Burner. Make sure that you use a
new CD-R/RW or a CD-R/RW where audio data has been recorded using the ATRAC CD burner
software.
• Close all other Windows applications. Make sure to close any virus-check software, as such software
application usually demands large amounts of system resources.
Continued
21
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Click
BURN.
The “Writing Settings” dialog box
appears. After confirming the writing
speed is in the range of the writing speed
of the CD-R/RW you are using, click
[Start].
Recording starts.
Once recording has started, you cannot
cancel it.
When recording is completed, “Writing
process is complete” appears. Click [OK].
If you cannot click [OK], take out the
CD-R/RW.
Note
Do not start up the SonicStage Simple Burner and other CD-R/RW burner software/OpenMG supporting
software (SonicStage, OpenMG Jukebox, etc.) at the same time on your computer.
If the icon of other CD-R/RW burner software is displayed in the task tray, close that software.
If recording failed
Press BURN again and select a lower recording speed by clicking V in the “Writing
Settings” dialog box.
Then click [START].
Checking information on the ATRAC CD inserted
If you insert an ATRAC CD into the CD-R/RW drive and click [Disc Info], you can get disc
detailed information.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Other information
Various settings
Selecting the recording mode
Select a mode for recording your audio CD and MP3 files on a CD-R/RW.
1 Click [CONFIG] so that the configuration
window appears.
2 Click V and select the recording mode you
want.
3 Click [OK] after you finish making the
desired setting.
Recording mode
Figures in parentheses show the maximum number
of tracks recordable on a CD-R/RW.* (estimated)
ATRAC3plus
ATRAC3
64 kbps
132 kbps
(approx. 360)
(approx. 170)
48 kbps
105 kbps
(approx. 490)
(approx. 220)
66kbps
(approx 350)
* When recording 4-minute tracks on a blank
700MB CD-R/RW .
Setting a CD-R/RW drive
You can select a drive to be used for reading and one to be used for recording.
1 Click [CONFIG] so that the configuration
window appears.
2 Click V and select a drive.
3 Click [OK].
Note
If you select a new drive setting, click [OK] and
close the configuration window before starting the
drive check. The setting is changed when you click
[OK].
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing version information
Click [CONFIG] then click [Version] tab.
Version information of the SonicStage Simple
Burner on your computer appears.
Click [OK] after you confirm the version.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing CDDB information
Confirming CD information registered in the
CDDB
If more than two pieces of information are registered in the CDDB, the following window
appears.
Select the type of information you want and click [Accept Match].
Once you have selected the type of information, CD information satisfying the match is
displayed automatically when you insert a CD into the CD-R/RW drive.
If you want to get other information, click [Disc Info] in the ATRAC CD frame.
Sending CD information to the CDDB
If you want to send CD information to the CDDB, do the following:
1 Click [CONFIG].
2 Click [CDDB (r)] in the configuration window.
3 Click [SEND] next to the CD information.
The Gracenote CDDB® window appears.
Click [Help/Guideline] and follow the displayed instructions.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings according to OS and
precautions
Settings according to OS
The settings and precautions will differ according to the operating system being used.
Check the items that apply to your system.
For Windows XP users
Restrictions when running the SonicStage Simple burner software under
Windows XP
•
To install this software, you must log on with a user name with “Computer Administrator”*
as an attribute.
•
You must log on as “Administrators” or “Power Users” to use the SonicStage Simple Burner
software.
•
•
Both editions of Windows XP (Home/Professional) can be used.
The NTFS format of Windows XP Home Edition or Windows XP Professional (factory
installed) can be used only with the standard (factory) settings.
* To check whether the user name has the attribute of “Computer Administrator,” go to [Start]–[Control
Panel]–[User Account], and then check the user name displayed on the window.
For Windows 2000 users
Restrictions when running the SonicStage Simple Burner software under
Windows 2000
•
•
You must log on as “Administrator” to install the SonicStage Simple Burner software.
You must log on as “Administrators” or “Power Users” to use the SonicStage Simple Burner
software.
•
•
Of the Windows 2000 versions, the SonicStage Simple Burner is supported only by Windows
2000 Professional.
The NTFS format of Windows 2000 Professional (factory installed) can be used only with
the standard (factory) settings.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
For users with OpenMG Jukebox, SonicStage, or
SonicStage Premium installed on their computer
Notes
• Make sure that the OpenMG Jukebox icon is not displayed in the task tray. If it is, the equipment connected
to your computer and the CD-R/RW drive may not be recognized by your computer.
• You cannot start up SonicStage Simple Burner and OpenMG Jukebox/SonicStage at the same time.
For users with OpenMG Jukebox 2.2.01-2.2.07 and
SonicStage earlier than Ver. 1.0.04 installed on their
computer
When you start the installation of SonicStage Simple Burner, an update confirmation dialog
appears. If you click [OK], OpenMG Jukebox and SonicStage Ver.1.0 will be updated
automatically after the installation of SonicStage Simple Burner is completed.
To check the version of OpenMG Jukebox and SonicStage Ver. 1.0
Select [Version Information] from the [Help] menu of OpenMG Jukebox or SonicStage Ver.
1.0. When updating is completed, the new version is “2.2.10.08020” (English version) for
OpenMG Jukebox and “1.0.10.08020” (English version) for SonicStage Ver. 1.0.
For users with OpenMG Jukebox 1.0-2.1 installed on their
computer
Upgrading of OpenMG Jukebox for Ver. 2.2 will be done automatically so that you can use
OpenMG Jukebox after the installation of SonicStage Simple Burner Ver. 1.0.
When you start the installation of SonicStage Simple Burner, an upgrade confirmation dialog
appears. If you click [Continue], OpenMG Jukebox will be upgraded automatically while the
installation of SonicStage Simple Burner is being performed. Follow the displayed instructions.
Continued
27
Download from Www.Somanuals.com. All Manuals Search And Download.
For users who registered music data with OpenMG Jukebox: Make sure to read
the following notes before installing the SonicStage Simple Burner.
•
Before upgrading, check in songs that were checked out using OpenMG Jukebox. After
OpenMG Jukebox is upgraded, it may not be possible to check in these songs.
•
Before upgrading, it is recommended you back up your audio data using the OpenMG
Jukebox back-up tool. For back-up and restoring of back-up data, refer to the OpenMG
Jukebox help.
As a back-up tool is not installed in OpenMG Jukebox Ver. 1.0-1.2, download the tool from
the homepage of OpenMG Jukebox (http://www.openmg.com).
•
Audio data registered to your computer using OpenMG Jukebox Ver.1.0-1.2 will be
upgraded automatically so that you can use the data after upgrading of the software.
To check the version of OpenMG Jukebox
Select [Version Information] from the [Help] menu of OpenMG Jukebox. When updating is
completed, the new version is “2.2.10.07040” (English version).
Note
If you install OpenMG Jukebox on a computer where SonicStage Simple Burner is already installed, install
OpenMG Jukebox, then upgrade the software using the CD-ROM of SonicStage Simple Burner.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Uninstalling the software
Note
If SonicStage Simple Burner Ver. 1.0 has been installed along with SonicStage Ver. 1.5, OpenMG Jukebox
Ver.2.2 or SonicStage Premium on your computer, and you uninstall one of these applications, make sure
[OpenMG Secure Module 3.2] is not uninstalled since it is used by all of these software applications.
For Windows XP users
Log on with a user name with “Computer Administrator” as an attribute, and then follow the
instructions below. Refer to the operating instructions of your computer for details on logging
on as an administrator.
1
2
Cick [Start]–[Control Panel].
The “Control Panel” window appears.
Double-click [Add/Remove Programs].
The “Add/Remove Programs” dialog box appears.
3
4
Click [Change or Remove Programs].
Click [SonicStage Simple Burner 1.0] in the “Currently Installed Programs” list,
and then click [Change and Remove].
Do as instructed by the message and restart the computer. When the computer restarts, the
uninstallation will be completed.
Continued
29
Download from Www.Somanuals.com. All Manuals Search And Download.
For Windows Millennium Edition/Windows 98
Second Edition users
1
Click [Start]–[Settings]–[Control Panel].
The “Control Panel” window appears.
2
3
Double-click [Add/Remove Programs].
The Add/Remove Programs Properties window appears.
Click [SonicStage Simple Burner 1.0] in the list of programs for automatic
removal, and then click [Add/Remove].
Do as instructed by the message and restart the computer. When the computer restarts, the
uninstallation will be completed.
For Windows 2000 users
Log on with a user name with “Computer Administrator” as an attribute, and then follow the
instructions below. Refer to the operating instructions of your computer for details on logging
on as an administrator.
1
2
Click [Start]–[Settings]–[Control Panel].
The “Control Panel” window appears.
Double-click [Add/Remove Applications].
The “Add/Remove Programs” dialog box appears.
3
4
Click [Change or Remove Programs].
Click [SonicStage Simple Burner 1.0] in the “Currently Installed Programs” list,
and then click [Change and Remove].
Do as instructed by the message and restart the computer. When the computer restarts, the
uninstallation will be completed.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Please perform the following steps if you encounter a problem while using the SonicStage
Simple Burner software. In case a message appears, it is recommended that you write it down.
Step 1: Check the symptoms in this “Troubleshooting” section.
A variety of information can also be found in the operating procedures and “Various
settings” (page 23) as well.
m
Step 2: Check the symptoms in the SonicStage Simple Burner 1.0
Online Help.
You can view the operating instructions of the SonicStage Simple Burner in the
display of your computer. For viewing, the Adobe Acrobat Reader must be installed
on your computer. Click [Start]–[All Programs] or [Program]–[SonicStage Simple
Burner]–[Manual (PDF)].
m
Step 3: Check the “Personal Audio•Customer Support” website
Click [Start]–[All Programs] or [Program]–[SonicStage Simple Burner]–[Support
Web].
m
Step 4: If the problem cannot be solved after checking the above
references.
Consult your nearest Sony dealer.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
If the installation was not successful
• Be sure to close all Windows applications before you start the installation.
t If you start the installation while other programs are running, a malfunction may occur.
This is especially true for programs that require large amounts of system resources, such
as virus-check software.
• Make sure your computer has enough hard disk drive space.
t 200 MB of free space or more on the hard disk drive is required. If your computer does
not have enough space, installation may not be possible.
• If the error message “Cannot be installed on this version of Windows” appears,
t See “Providing the required system environment” on page 7.
• If the installation is still unsuccessful after all that you have done,
t The installation may be carried out by copying all files to the hard disk as follows:
1
2
Create a new folder on the hard disc.
Insert the supplied CD-ROM (SonicStage Simple Burner Ver.1.0) into the CD-ROM
drive.
3
4
5
When the installation window appears, click [Exit] to cancel the installation.
Right-click the start menu and start up Explorer.
Select [SonicStage Simple Burner] on the CD-ROM drive, and then click [Edit]–
[Select All].
6
7
8
Click [Edit]–[Copy to Folder] (or [Edit]–[Copy]) to copy all files to the folder that
you created in step 1.
Remove the CD-ROM from the CD-ROM drive, open the folder that was copied to
the hard disk and double-click [setup.exe].
When the installation window appears, follow the displayed instructions to install
[SonicStage Simple Burner Ver. 1.0].
t The installation may also be carried out by installing the software from [Start]–[Run].
Tracks do not appear on the display
• Is an audio CD inserted into the drive used for reading?
t Insert an audio CD into the drive used for reading.
t Setting of the drive used for reading is wrong. Click [CONFIG] and reset the designation
of the drive to be used for reading to the drive where the CD is inserted.
• Are the MP3 files included in the group selected?
t Select a group where MP3 files are included.
• Is the drive to be used for reading capable of digital music playback?
t If not, an audio CD may not be recognized or the making of a disc image may be
interrupted. Use a drive that is capable of digital music playback.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
You cannot record a CD on a CD-R/RW.
• Is a CD-R/RW drive for recording recognized by your computer?
t If not, a CD cannot be recorded on a CD-R/RW. Check the connection if you are using
the external CD-R/RW drive.
• Is a CD-R/RW inserted in the CD-R/RW drive?
t Check to see if a CD-R/RW is inserted in the drive.
• Is a CD-R/RW that was recorded with software other than ATRAC3plus/ATRAC3
software inserted?
t Use a new CD-R/RW or an ATRAC CD that was recorded with SonicStage Simple
Burner.
• Is the CD-R/RW inserted upside down?
t Check the side used for recording and insert it correctly.
• Do you use the CD-R/RW that was recorded with the ATRAC CD software on
another computer?
t You can record additional content on an ATRAC CD using the ATRAC CD software on
your computer only.
• Are you trying to manage the ATRAC3plus/ATRAC3 files as general files using the
Explorer?
t Do not edit ATRAC3plus/ATRAC3 files with these files writing software other than the
SonicStage Simple Burner. If you do so, these files cannot be played back even on the
CD player this software is supplied with.
• Are you using a CD-R/RW where recording was interrupted for some reason?
t Use a new CD-R/RW.
• Are you using a duplicated CD-R/RW?
t Use a new CD-R/RW.
• Have you performed a reinstallation of the OS (or a total recovery) of your computer?
t If you have reinstalled the OS (or a total recovery), you cannot add audio data to an
ATRAC CD on which audio data is already recorded.
The time left for additional recording on a CD-R/
RW is too short.
• Have you repeatedy recorded additional content on this CD-R/RW?
t If so, the amount of data space available will decrease because recording on a CD-R/RW
consumes approx. 14 MB of overhead per recording (over and above the space used for
recording tracks).
Continued
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording was unsuccessful. (You cannot play
back the CD-R/RW you created on your CD player.)
• Is the writing speed properly set?
t Depending on the CD-R/RW drive you use, the data transfer speed to the CD-R/RW
drive may be lower than the writing speed so that recording will fail (Buffer Under Run
error). If this happens, click BURN to display the “Writing Settings” dialog box and
set the writing speed lower. (page 22)
• Are you performing operations other than burning a CD-R/RW on your computer?
t Depending on the configuration of your computer, a Buffer Under Run error is likely to
happen if you start up and use other applications while burning a CD-R/RW. When
making a CD-R/RW, make sure to stop other operations. Also be careful that the screen
saver is turned off and your computer will not enter hibernation mode.
• Are you using the proper CD-Rs/RWs for your CD-R/RW drive?
t Certain CD-R/RW drives are not capable of writing to certain CD-R/RW media. Use the
CD-R/RW media recommended by the manufacturer of your CD-R/RW drive or those
matching the writing speed.
• Are there scratches or any damage on the surface of the CD-R/RW?
t If there is a scratch or dirt on the surface of the disc, recording will fail. When storing
your discs, be careful they will not be damaged.
You cannot use the SonicStage Simple Burner.
• Did you log on to your computer properly?
t To use this software, you have to log on as “Computer Administrator” or “Power User.”
Consult with the computer administrator or log on again with a user name of “Computer
Administrator” or “Power User.”
• Did you change the user’s account while the software is running?
t Restart your computer with the name you used when started up the SonicStage Simple
Burner and shut down your computer once.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer
Manufacturer:
Model:
Type:
Name of operating system:
OS:
Desktop type / Laptop type
Windows XP Home Edition / Windows XP Professional /
Windows 2000 Professional / Windows Millennium
Edition / Windows 98 Second Edition
RAM capacity:
Ram capacity:
Hard disk drive (containing SonicStage Simple Burner Ver. 1.0 and audio data)
Capacity of the drive:
Free space:
Installed folder containing SonicStage Simple Burner (if other than the default folder)1)
Location of the
installed folder:
Version of the software (SonicStage Simple Burner Ver.1.0)2):
Version:
Error Message (if one appears):
Error message
If an externaly connected CD-R/RW drive is used
Manufacturer:
Model:
Type:
CD-ROM / CD-R/RW / DVD-ROM / Other (
)
Type of connection to PC card / USB / IEEE1394 / ATAPI/
the computer: Other (
)
1)
2)
If you do not specify the destination, the software is installed at C:\Program files\Sony\SonicStage Simple
Burner.
Click [CONFIG] then click [Version] tab to confirm the version. (page 24)
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Sony Corporation Printed in Malaysia
Download from Www.Somanuals.com. All Manuals Search And Download.
|