Sony DVD Recorder RDR HXD562 User Manual

2-686-265-11(1)

DVD Recorder

Operating Instructions

To find out useful hints, tips and information about Sony products and

services please visit: www.sony-europe.com/myproduct

RDR-HXD560/HXD562

Download from Www.Somanuals.com. All Manuals Search And Download.

• Do not move the recorder for

one minute after you have

unplugged the mains lead.

• Do not attempt to replace or

upgrade the hard disk by

yourself, as this may result in

malfunction.

On placement

Copyrights

• Place the recorder in a location

with adequate ventilation to

prevent heat build-up in the

recorder.

• Television programmes, films,

video tapes, discs, and other

materials may be copyrighted.

Unauthorized recording of

such material may be contrary

to the provisions of the

• Do not place the recorder on a

soft surface such as a rug that

might block the ventilation

holes.

• Do not place the recorder in a

confined space such as a

bookshelf or similar unit.

• Do not place the recorder in a

location near heat sources, or

in a place subject to direct

sunlight, excessive dust, or

mechanical shock.

this recorder with cable

If the hard disk drive should

malfunction, you cannot recover

lost data. The hard disk drive is

only a temporary storage space.

television transmission may

require authorization from the

cable television transmitter

and/or programme owner.

• This product incorporates

technology that is protected by

U.S. patents and other

intellectual property rights.

Use of this copyright

protection technology must be

authorized by Macrovision,

and is intended for home and

other limited viewing uses

only unless otherwise

authorized by Macrovision.

Reverse engineering or

disassembly is prohibited.

About repairing the hard

disk drive

• The contents of the hard disk

drive may be checked in case

of repair or inspection during a

malfunction or modification.

However, the contents will not

be backed up or saved by

Sony.

• Do not place the recorder in an

inclined position. It is

designed to be operated in a

horizontal position only.

• Keep the recorder and discs

away from equipment with

strong magnets, such as

microwave ovens, or large

loudspeakers.

• If the hard disk needs to be

formatted or replaced, it will

be done at the discretion of

Sony. All contents of the hard

disk drive will be erased,

including contents that violate

• Do not place heavy objects on

the recorder.

Copy guard function

On recording

Make trial recordings before

making the actual recording.

Since the recorder has a copy

guard function, programmes

received through an external

tuner (not supplied) may contain

copy protection signals (copy

guard function) and as such may

not be recordable, depending on

the type of signal.

On power sources

• The recorder is not

disconnected from the AC

power source (mains) as long

as it is connected to the wall

outlet, even if the recorder

itself has been turned off.

• If you are not going to use the

recorder for a long time, be

sure to disconnect the recorder

from the wall outlet. To

On compensation for lost

recordings

Sony is not liable and will not

compensate for any lost

recordings or relevant losses,

including when recordings are

not made due to reasons

including recorder failure, or

when the contents of a recording

are lost or damaged as a result of

recorder failure or repair

undertaken to the recorder. Sony

will not restore, recover, or

replicate the recorded contents

under any circumstances.

IMPORTANT NOTICE

Caution: This recorder is

capable of holding a still

video image or on-screen

display image on your

disconnect the AC power cord

(mains lead), grasp the plug

itself; never pull the cord.

television screen

indefinitely. If you leave the

still video image or on-

screen display image

displayed on your TV for an

extended period of time you

risk permanent damage to

your television screen.

Plasma display panels and

projection televisions are

especially susceptible to this.

If you have any questions or

problems concerning your

recorder, please consult your

nearest Sony dealer.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

About this manual

Check your model name

The instructions in this

manual are for 2 models:

RDR-HXD560 and RDR-

HXD562. Check your model

name by looking at the front

panel of the recorder.

• In this manual, the internal

hard disk drive is written as

“HDD,” and “disc” is used as a

general reference for the HDD,

DVDs, or CDs unless

otherwise specified by the text

or illustrations.

• Icons, such as

, listed

DVD

at the top of each explanation

indicate what kind of media

can be used with the function

being explained.

• Instructions in this manual

describe the controls on the

remote. You can also use the

controls on the recorder if they

have the same or similar

names as those on the remote.

• The on-screen display

illustrations used in this

manual may not match the

graphics displayed on your TV

screen.

• The explanations regarding

DVDs in this manual refer to

DVDs created on this recorder.

The explanations do not apply

to DVDs that are created on

other recorders and played

back on this recorder.

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Quick Guide to Disc Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Recordable and playable discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Playable discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 0

Hookups and Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Hooking Up the Recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 2

Step 1: Connecting the Aerial Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Step 2: Connecting the Video Cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

About the SMARTLINK features (for SCART connections only ). . . . . . . 1 4

Step 3: Connecting the Audio Cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Step 4: Connecting the Mains Lead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 6

Step 5: Preparing the Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Controlling TVs with the remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

If you have a Sony DVD player or more than one Sony DVD recorder . . . . 18

Changing programme positions of the recorder using the remote . . . . . 19

Step 6: Easy Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 0

Connecting a VCR or Similar Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Connecting to the LINE 3 jac k . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1

Connecting to the LINE 2 IN jacks on the front panel . . . . . . . . . . . . . . . 22

Connecting to a Satellite or Digital Tuner . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Eight Basic Operations — Getting to Know Your DVD Recorder

1. Inserting a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

2. Recording a Programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 4

Checking the disc status while recording . . . . . . . . . . . . . . . . . . . . . . . .2 5

3. Playing the Recorded Programme (Title List) . . . . . . . . . . . . . . . . . . . . . . 26

4. Displaying the Playing/Remaining Time and Play Information . . . . . . . . . 28

Checking the playing/remaining time. . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Checking the remaining disc space. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

5. Changing the Name of a Recorded Programme . . . . . . . . . . . . . . . . . . . 31

6. Labelling and Protecting a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Labelling a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Protecting a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

7. Playing the Disc on Other DVD Equipment (Finalise) . . . . . . . . . . . . . . . 33

Finalising the disc using Z (open/close) button . . . . . . . . . . . . . . . . . . . 34

Finalising the disc using “Disc Information” display. . . . . . . . . . . . . . . . . 34

Unfinalising a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 5

8. Reformatting a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Guide to Digital Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 7

EPG (Electronic Programme Guide) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Viewing a list of available channel s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 7

Viewing programmes related to a specific category . . . . . . . . . . . . . . . .3 8

Programme information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Displaying the programme information . . . . . . . . . . . . . . . . . . . . . . . . . . 39

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

Viewing a digital text service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Selecting digital text from dedicated digital teletext channel s . . . . . . . . . 4 0

Selecting digital text from other channels . . . . . . . . . . . . . . . . . . . . . . . . 41

Favourites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Setting the Favourites List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Watching or listening to a favourite channel . . . . . . . . . . . . . . . . . . . . . . 42

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Before Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Recording mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Unrecordable picture s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 5

Timer Recording (Standard/EPG) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Setting the timer manually (Standard). . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Recording TV programmes using the EPG. . . . . . . . . . . . . . . . . . . . . . . 48

Recording programmes using Series Recording . . . . . . . . . . . . . . . . . . 49

Using the Quick Timer functio n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 0

Adjusting the recording picture quality and size . . . . . . . . . . . . . . . . . . . 51

Creating chapters in a title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Checking/Changing/Cancelling Timer Settings . . . . . . . . . . . . . . . . . . . . . . 52

Checking/Changing/Cancelling using the EPG. . . . . . . . . . . . . . . . . . . . 52

Checking/Changing/Cancelling using the Timer List. . . . . . . . . . . . . . . . 53

Recording From Connected Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Recording from connected equipment with a timer (Synchro Rec). . . . . 55

Recording from connected equipment without a timer . . . . . . . . . . . . . . 57

Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Playback option s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 0

Adjusting the picture quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Adjusting the delay between the picture and sound (AV SYNC) . . . . . . 62

Pausing a TV Broadcast (TV Pause) . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Playing from the beginning of the programme you are recording

(Chasing Playback). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Playing a previous recording while making another

(Simultaneous Rec and Play) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Searching for a Title/Chapter/Track, etc. . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Playing MP3 Audio Tracks or JPEG Image Files . . . . . . . . . . . . . . . . . . . . . 65

About MP3 audio tracks and JPEG image files . . . . . . . . . . . . . . . . . . . 66

MP3 audio tracks or JPEG image files that the recorder can play . . . . . 66

About playback order of albums, tracks, and files. . . . . . . . . . . . . . . . . . 67

Erasing and Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68

Before Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Erasing and Editing a Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Erasing multiple titles (Erase Titles) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Erasing a section of a title (A-B Erase) . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Dividing a title (Divide) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Creating chapters manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Download from Www.Somanuals.com. All Manuals Search And Download.

Creating and Editing a Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Moving a Playlist title (Change Order). . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Combining multiple Playlist titles (Combine) . . . . . . . . . . . . . . . . . . . . . . 74

Dividing a Playlist title (Divide) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Dubbing (HDD y DVD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76

Before Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

About “Dub Mode” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Dubbing a single title (Title Dubbing). . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Dubbing multiple titles (Dub Selected Titles). . . . . . . . . . . . . . . . . . . . . . 80

DV Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82

Before DV Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 2

Preparing for DV dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Recording an Entire DV Format Tape (One Touch Dubbing) . . . . . . . . . . . . 84

Program Edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Settings and Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87

Clock and Language Settings (Basic) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 7

Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Digital TV settings (DTV Settings) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Favourites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Parental Lock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Video Settings (Video) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Audio Settings (Audio) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

Recording Settings (Recording) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Disc Settings (DVD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Remote Control Settings/Factory Settings (Others) . . . . . . . . . . . . . . . . . . 100

Easy Setup (Resetting the Recorder) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Self-diagnosis Function (When letters/numbers appear in the display) . . . 108

Notes About This Recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 09

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

About i.LINK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

Guide to Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112

Language Code List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115

Area Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 15

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Guide to Disc Types

Recordable and playable discs

Icon used in Formatting

this manual (new discs)

Compatibility with other DVD

players (finalising)

Type

Disc Logo

Hard disk drive

(internal)

Formatting

unnecessary

Dub HDD contents to a DVD

to play on other DVD players

HDD

Automatically

formatted in

+VR mode

(DVD+RW

VIDEO)

Playable on DVD+RW

compatible players

(automatically finalised)

DVD+RW

Playable only on VR mode

compatible players

(finalisation unnecessary)

mode

Format in VR

mode (page 24)

RWVR

DVD-

Format in

Video mode

(page 24)

Playable on most DVD

players (finalisation

necessary) (page 33)

Video

mode

RWVideo

DVD+R

Automatically

formatted in

+VR mode

(DVD+R

Playable on most DVD

players (finalisation

necessary) (page 33)

VIDEO)

DVD+R DL

Format in VR

mode

(page 24)

Playable only on DVD-R in

VR mode compatible players

(finalisation necessary)

mode

Formatting is

performed

RVR

using the “Disc (page 33)

Information”

DVD-R

display.

Automatically Playable on most DVD

Video

mode

formatted in

Video mode

players (finalisation

necessary) (page 33)

RVideo

Download from Www.Somanuals.com. All Manuals Search And Download.

Usable disc versions (as of March 2006)

• 8x-speed or slower DVD+RWs

• 6x-speed or slower DVD-RWs (Ver.1.1,

Ver.1.2 with CPRM

)

• 16x-speed or slower DVD+Rs

• 16x-speed or slower DVD-Rs (Ver.2.0,

Ver.2.1 with CPRM

)

• 8x-speed or slower DVD+R DL (Double

Layer) discs

“DVD+RW,” “DVD-RW,” “DVD+R,” “DVD+R

DL,” and “DVD-R” are trademarks.

When an unformatted DVD-R is inserted into

this recorder, it is automatically formatted in

Video mode. To format a new DVD-R in VR

mode, format using the “Disc Information”

display (page 24).

CPRM (Content Protection for Recordable

Media) is a coding technology that protects

copyrights for images.

Discs that cannot be recorded on

• 8 cm discs

• DVD-R DL (Dual Layer) discs

• DVD-RAMs

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

Playable discs

Icon used in

this manual

Type

Disc Logo

Characteristics

Discs such as movies that can be

purchased or rented

This recorder also recognizes DVD-

RAMs and DVD-R Dual Layer (Video

mode) discs as DVD Video compatible

discs. If the DVD-RAM has a

removable cartridge, remove the

cartridge before playback.

DVD VIDEO

DVD

VIDEO CDs or CD-Rs/CD-RWs in

VIDEO CD/Super VIDEO CD format

VIDEO CD

VCD

Music CDs or CD-Rs/CD-RWs in

music CD format

DVD+RWs/DVD+Rs/DVD-RWs/

DVD-Rs/DVD-ROMs containing

JPEG image files

DATA DVD

—

DATA DVD

DATA CD

CD-ROMs/CD-Rs/CD-RWs

containing either MP3 audio tracks or

JPEG image files

DATA CD

8 cm DVD+RW, DVD-RW, and

DVD-R recorded with a DVD video

camera

(Still images recorded with a DVD

video camera cannot be played.)

8 cm DVD+RW/

DVD-RW/DVD-R

—

“DVD VIDEO” and “CD” are trademarks.

• DVD VIDEOs with a different region code

(page 11).

• DVDs that were recorded on a different

recorder and not correctly finalised.

Discs that cannot be played

• PHOTO CDs

• CD-ROMs/CD-Rs/CD-RWs that are

recorded in a format different from the

formats mentioned in the table above.

• Data part of CD-Extras

• DVD-ROMs/DVD+RWs/DVD-RWs/

DVD+Rs/DVD-Rs that do not contain

DVD Video or JPEG image files.

• DVD Audio discs

• Cartridge-only type DVD-RAMs and/or

DVD-RAMs that do not contain DVD

Video.

• HD layer on Super Audio CDs

Download from Www.Somanuals.com. All Manuals Search And Download.

Maximum recordable number of titles

Note on DualDiscs

A DualDisc is a two sided disc product which

mates DVD recorded material on one side

with digital audio material on the other side.

However, since the audio material side does

not conform to the Compact Disc (CD)

standard, playback on this product is not

guaranteed.

Disc

Number of titles*

HDD

300

DVD-RW/DVD-R

DVD+RW/DVD+R

DVD+R DL

* The maximum length for one title is eight hours.

b Notes

• Some DVD+RWs/DVD+Rs, DVD-RWs/DVD-

Rs, DVD-RAMs, or CD-RWs/CD-Rs cannot be

played on this recorder due to the recording

quality or physical condition of the disc, or the

characteristics of the recording device and

authoring software. The disc will not play if it has

not been correctly finalised. For more

information, see the operating instructions for the

recording device.

• You cannot mix VR mode and Video mode on the

same DVD-RW. To change the disc’s format,

reformat the disc (page 35). Note that the disc’s

contents will be erased after reformatting.

• You cannot shorten the time required for

recording even with high-speed discs.

• It is recommended that you use discs with “For

Video” printed on their packaging.

• You cannot add new recordings to DVD+Rs,

DVD-Rs, or DVD-RWs (Video mode) that

contain recordings made on other DVD

equipment.

• In some cases, you may not be able to add new

recordings to DVD+RWs that contain recordings

made on other DVD equipment. If you do add a

new recording, note that this recorder will rewrite

the DVD menu.

Note on playback operations of DVD

VIDEOs/VIDEO CDs

Some playback operations of DVD VIDEOs/

VIDEO CDs may be intentionally set by

software producers. Since this recorder plays

DVD VIDEOs/VIDEO CDs according to the

disc contents the software producers

designed, some playback features may not be

available. See the instructions supplied with

the DVD VIDEOs/VIDEO CDs.

Region code (DVD VIDEO only)

Your recorder has a region code printed on

the rear of the unit and will only play DVD

VIDEOs (playback only) labelled with

identical region codes. This system is used to

protect copyrights.

DVD VIDEOs labelled

on this recorder.

will also play

ALL

If you try to play any other DVD VIDEO, the

message “Playback prohibited by region

code.” will appear on the TV screen.

Depending on the DVD VIDEO, no region

code indication may be labelled even though

playing the DVD VIDEO is prohibited by

area restrictions.

• You cannot edit recordings on DVD+RWs,

DVD-RWs (Video mode), DVD+Rs, or DVD-Rs

that are made on other DVD equipment.

• If the disc contains PC data unrecognizable by

this recorder, the data may be erased.

Region code

• You may not be able to record on some

recordable discs, depending on the disc.

Music discs encoded with copyright

protection technologies

This product is designed to play back discs

that conform to the Compact Disc (CD)

standard.

Recently, various music discs encoded with

marketed by some record companies. Please

be aware that among those discs, there are

some that do not conform to the CD standard

and may not be playable by this product.

Download from Www.Somanuals.com. All Manuals Search And Download.

Hookups and Settings

Hooking Up the Recorder

Follow steps 1 through 6 to hook up and adjust the settings of the recorder. Do not connect the

mains lead until you reach “Step 4: Connecting the Mains Lead” on page 16.

b Notes

• See “Specifications” (page 110) for a list of supplied accessories.

• Plug in cords securely to prevent unwanted noise.

• Refer to the instructions supplied with the components to be connected.

• You cannot connect this recorder to a TV that does not have a SCART or video input jack.

• Be sure to disconnect the mains lead of each component before connecting.

Step 1: Connecting the Aerial Cable

Connect the aerial cable by following the steps below.

to AERIAL IN

DVD recorder

to AERIAL OUT

Aerial cable (supplied)

: Signal flow

1 Disconnect the aerial cable from your TV, and connect it to AERIAL IN on the rear

panel of the recorder.

2 Connect AERIAL OUT of the recorder to the aerial input of your TV using the supplied

aerial cable.

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 2: Connecting the Video Cords

Select one of the following patterns, A through D, according to the input jack on your TV

monitor, projector, or AV amplifier (receiver). This will enable you to view pictures.

INPUT

Audio/video cord

(not supplied)

VIDEO

SCART cord

(not supplied)

(yellow)

AUDIO

TV, projector, or AV

amplifier (receiver)

to i LINE 1 – TV

to LINE 2 OUT (VIDEO)

DVD recorder

(red)

(blue)

(green)

to LINE 2 OUT (S VIDEO)

to COMPONENT VIDEO OUT

S-video cord

(not supplied)

COMPONENT

VIDEO IN

INPUT

(green)

(blue)

(red)

S VIDEO

B/CB

R/CR

Component video

cord (not supplied)

TV, projector, or AV

amplifier (receiver)

TV, projector, or AV

amplifier (receiver)

: Signal flow

A SCART input jack

D Component video input jacks (Y, PB/CB,

P^R/CR)

You will enjoy accurate colour reproduction

and high quality images.

If your TV accepts progressive 525p/625p

format signals, use this connection and set

“Component Out” in the “Video” setup to

“On” (page 93). Then set “Progressive

Output” to “On” in the “Video” setup to send

progressive video signals. For details, see

“Progressive Output” on page 93.

When you set “Easy Setup - Line1 Output” to

“S Video” or “RGB” (page 20), use a

SCART cord that conforms to the selected

signal.

B Video input jack

category

TV/RADIO

Switch between TV and

Radio channels.

RETURN

Close the EPG display.

Viewing programmes related to

a specific category

This feature allows you to search for

programmes related to a particular topic.

For example, if you select “News” from the

category pop-up list, then only programmes

related to News will be shown in the EPG.

3 Select a programme, and press

ENTER.

b Note

The full screen dialog appears with the

description of the programme displayed

in the information box.

The category of each programme is determined by

the broadcaster.

4 Select “View Programme,” and press

ENTER.

Colour

buttons

M/m,

ENTER

PAGE

Download from Www.Somanuals.com. All Manuals Search And Download.

1 Press

Programme information

2 Press the red button.

The category pop-up list appears.

The programme information display provides

a quick and easy way to:

• View descriptions of the programmes being

broadcast now and next on the current

channel.

• View descriptions of the programmes being

broadcast now and next on the other

channels.

• Switch between TV and RADIO channels.

3 Press M/m to select a category, and

press ENTER.

Number

buttons

The selected category is displayed in a

title bar at the top of the EPG display and

only programmes related to that category

will be shown in the list.

Some examples of category types are

as follows:

All Programmes: This gives a complete

channel list.

Films: Displays movies available for

viewing.

News: Displays all news channels.

Entertainment: Displays all

entertainment channels.

</M/m/,,

ENTER

PAGE

Sports: Displays all sports channels.

Kids: Displays all children’s channels.

Music: Displays all music channels.

Displaying the programme

information

4 Press M/m to select a programme,

Press

and press ENTER.

The Information display appears showing a

description of the current programme on

view.

The sub menu appears with the

description of the programme displayed

in the information box.

5 Select “View Programme,” and press

ENTER.

To scroll the Category display by page

(Page mode)

Press PAGE

while the Category

display is turned on to change to the previous/

next Category page.

z Hint

In step 4 above, the EPG application also allows

you to set a timer recording. For more details, see

“Recording TV programmes using the EPG” on

page 48.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

Available buttons in the Information

display

Viewing a digital text

service

Buttons

Operations

PAGE

Scroll the information

display by page

Many digital TV channels broadcast

information via their text service. This digital

service includes high quality digital text and

graphics along with advanced navigation

options. Additionally, this recorder has

access to dedicated text channels transmitted

by the broadcasters.

</,

Toggle the display

between discription of the

current/next programme

M/m or the

Display programme

number buttons information for other

channels

Toggle the Favourites List

b Note

The appearance, content and navigation methods of

all digital text services are decided by the

broadcaster.

ENTER

View the selected channel

PROG +/–

Number

buttons

Colour

buttons

</M/m/,,

ENTER

Selecting digital text from

dedicated digital teletext

channels

1 Select a dedicated channel that is

broadcasting digital text.

You can search for a dedicated digital

text channel using the “Electronic

Programme Guide” (page 37).

The text page is displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

2 Once the text page is displayed (this

may take some time), follow the on-

screen instructions to obtain your

required selection.

Favourites

The Favourite application gives you the

option to:

• Store your favourite channels into one of

four TV or four Radio lists.

• Add or delete channels to the Favourites

List.

• Quickly display a favourite channel.

• All receivable channels are automatically

stored in the Favourites List.

On some pages the TV programme may

also be displayed on the text screen. On-

screen instructions will inform you how

to change the displayed programme.

If you are instructed to press “OK” or

“Select” when viewing the text pages,

press ENTER.

To exit the text service

Follow the on screen instructions, or press

PROG +/–.

Selecting digital text from

other channels

Colour

buttons

SYSTEM

Digital text services may also be available on

other digital channels. This is sometimes

indicated by a small symbol on your TV

screen, superimposed on the programme you

are watching.

</M/m/,,

ENTER

PAGE

1 Select a channel.

2 Press

(Text) or the button

indicated on screen by the

broadcaster.

The text information appears.

TV/RADIO

3 Access required information using

</M/m/,, the colour buttons and/

or the number buttons.

Setting the Favourites List

If you are instructed to press “OK” or

“Select” when viewing the text pages,

press ENTER.

1 Press SYSTEM MENU.

The System Menu Display appears.

2 Select “SETUP,” and press ENTER.

The Setup Display appears.

To exit the text service

Follow the on screen instructions, or press

PROG +/–.

3 Select “DTV Settings,” and press

ENTER.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

4 Select “Favourites,” and press

ENTER.

Watching or listening to a

favourite channel

“Favourites List 1” display appears.

Press

repeatedly to switch to a

different Favourites List.

1 While in normal operation mode,

press

repeatedly to select a list.

Then press ENTER.

The selected Favourites List display

appears.

Indicates the currently viewed channel

This display shows all the TV or Radio

channels available to you.

5 Press TV/RADIO to display either your

favourite TV or favourite Radio

channels at any time.

The Radio mode is indicated by the

presence of a Radio icon

Favourites List panel.

in the

2 Press TV/RADIO to display either your

favourite TV or favourite Radio

channels at any time.

6 Press M/m or enter a channel number

to select a channel you want to delete

as a favourite, and press ENTER.

Press ENTER again to add the channel

back to the Favourites List.

The Radio mode is indicated by the

presence of a Radio icon

Favourites List panel.

in the

3 Press

to switch to a different

Favourites List.

4 Press M/m to select the channel you

want to view or listen to, and press

ENTER.

If you do not want to choose from one of

the channels in the display, press the red

or green button to view the previous or

next available channels.

To scroll the Favourites List display by

page (Page mode)

Press PAGE

while the Favourites

List display is turned on to change to the

previous/next page.

z Hints

• Press the blue button to view the list showing only

your favourite channels.

• Press the blue button once again when you wish

to return to the previous favourite channel setting

display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Press TV/RADIO to display either the

TV or the Radio channels at any time.

The Radio mode is indicated by the

Index

presence of a Radio icon

panel.

in the Index

The Index application is an easy way to

display a scrollable list of all the tuned

channels, including your favourites channel

lists, and allows one of these to be selected.

4 Press M/m to select the desired

channel, then press ENTER to exit the

index menu and view the selected

channel.

To scroll the Index display by page

(Page mode)

Press PAGE

while the Index display

is turned on to change to the previous/next

page.

M/m,

ENTER

PAGE

TV/RADIO

1 While in normal operation mode,

press ENTER.

The Index display for the last display you

viewed appears. For instance, if the last

display you viewed was the Favourites

List, then the Favourites List appears.

2 Press

to switch between the

Programme List.

Download from Www.Somanuals.com. All Manuals Search And Download.

Press REC MODE repeatedly to switch the

recording modes.

Timer Recording

To select the HQ+ mode, set “HQ Setting” of

the “HDD Rec. Settings” to “HQ+” in the

“Recording” setup (page 97). “HQ+” records

pictures in higher quality than HQ on the

HDD. Note that HQ+ plus appears as HQ in

the front panel display and the on-screen

displays.

Before Recording

Before you start recording…

• Check that the disc has enough available

space for the recording (page 30). For the

HDD, DVD+RWs, and DVD-RWs, you

can free up disc space by erasing titles

(page 69).

Approx. recording

time (hours)

Recording mode

HDD

DVD*

• Adjust the recording picture quality and

picture size if necessary (page 51).

HQ+ (High quality)

–

z Hint

HSP

1 hr.

30 min.

Timer recordings will be made regardless whether

or not the recorder is turned on. You can turn off the

recorder without affecting the recording even after

recording starts.

SP (Standard mode) 26

LSP

2 hr.

30 min.

b Notes

• To play a recorded disc on other DVD equipment,

finalise the disc (page 33).

ESP

• If digital teletext is operated while recording, it’s

contents will be recorded on the disc.

• If the subtitles are displayed while recording, they

will be recorded on the disc.

SLP (Long duration) 106

* The recording time for DVD+R DL (Double

Layer) discs is as follows:

HQ: 1 hour 48 minutes

HSP: 2 hours 42 minutes

SP: 3 hours 37 minutes

LSP: 4 hours 31 minutes

ESP: 5 hours 25 minutes

LP: 7 hours 14 minutes

EP: 10 hours 51 minutes

SLP: 14 hours 28 minutes

Recording mode

Like the standard ×3 recording modes of

video tapes, you can select the desired

recording mode using the REC MODE

button.

Recording modes with higher quality provide

a more beautiful recording, but the large data

volume also results in a shorter recording

time.

b Notes

• The maximum continuous recording time for a

single title is eight hours.

Conversely, a longer duration provides a

longer recording time, but the lower data

volume results in a coarser picture quality.

• Situations below may cause slight inaccuracies

with the recording time.

– Recording a programme with poor reception, or

a programme or video source of low picture

quality

– Recording on a disc that has already been edited

– Recording only a still picture or just sound

Download from Www.Somanuals.com. All Manuals Search And Download.

Unrecordable pictures

Timer Recording

(Standard/EPG)

Pictures with copy protection cannot be

recorded on this recorder.

When the recorder receives a copy guard

signal, the recorder continues to record but

only a blank, grey coloured screen will be

recorded.

RWVR RWVideo

HDD

RVideo

RVR

You can set the timer for a total of 40

programmes, up to 30 days in advance.

There are three methods to set the timer: the

standard method, EPG method and Series

Recording method.

Copy control Recordable discs

signals

Copy-Free

RWVR

HDD

• Standard: Set the date, time, and

programme position of the programme

manually.

• EPG: Set a programme to be recorded based

on the information provided by the EPG

(Electronic Programme Guide) (page 48).

• Series Recording: Automatically sets the

recorder to record programmes in a series

(page 49).

RVR

RWVideo

RVideo

Copy-Once

Copy-Never

HDD

RWVR

(CPRM*)

RVR

None (a blank screen is

recorded)

* The recorded disc can be played only on CPRM

compatible equipment (page 8).

Setting the timer manually

(Standard)

</M/m/,,

ENTER

OPTIONS

[TIMER]

x REC

STOP

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

1 Press [TIMER].

4 Select “OK,” and press ENTER.

The “TIMER LIST” display (page 53)

appears. The TIMER REC indicator

lights up on the front panel and the

recorder is ready to start recording.

Unlike a VCR, there is no need to turn off

the recorder before the timer recording

starts.

To stop recording during timer recording

Press x REC STOP.

Note that it may take a few seconds for the

recorder to stop recording.

2 Press M/m to select the “Day and

Time” or “Mode” row. Then press

ENTER.

3 Select an item using </, and

adjust using M/m. Then press ENTER.

To make additional changes to items in

different rows, return to step 2. The

adjustable items are listed below.

“Day and Time”:

Rec. Mode Adjust

If there is not enough available disc space for

the recording, the recorder automatically

adjusts the recording mode to enable the

entire programme to be recorded. Set “Rec.

Mode Adjust” of the “Timer Settings” to

“On” in the “Recording” setup (page 97).

Sets the date, start time, and stop time,

and selects the programme position or

input source.

The date item changes as follows:

Today y …… y Sat 28.10 (30 days

later) y Sun (every Sunday) y ……

y Sat (every Saturday) y Mon - Fri

(Monday to Friday) y Mon - Sat

(Monday to Saturday) y Daily y

Today

Auto Title Erase (HDD only)

If there is not enough space for a timer

recording, the recorder automatically erases

old titles recorded on the HDD. The oldest,

played title is erased. Set “Auto Title Erase”

of the “Timer Settings” to “On” in the

“Recording” setup (page 97). Protected titles

are not erased.

“Mode”:

Selects the recording mode (page 44).

“Media”:

Selects the media, HDD or DVD.

“Update” (HDD only):

If the timer settings overlap

Overlapped timer settings are shown as

follows.

Automatically records over a previously

recorded programme that is set to be

recorded daily or weekly.

“Extend Time”:

Sets the duration in increments of 10

minutes, for a maximum of 60 minutes

when a timer recording is in progress. If

the programme set to be recorded daily or

weekly is extended, the manually

extended time set here will be added to

the subsequent timer recording times.

• If you make a mistake, select the item

and change the setting.

To store the setting as shown, select “OK.”

The programme that has a

mark next to it

has lower priority and will not be entirely

recorded.

To cancel the overlapped setting, select

“Cancel.”

Download from Www.Somanuals.com. All Manuals Search And Download.

b Notes

To confirm, change, or cancel a timer

recording

See “Checking/Changing/Cancelling Timer

Settings” on page 52.

• If a message indicating that the disc is full appears

on the screen, change the disc, or make available

space for the recording (HDD/DVD+RW/DVD-

RW only) (page 70).

• Check that the clock is correctly set before setting

the timer recording. If not, the timer recording

cannot be made.

To extend the recording duration time

while recording

• To record a satellite programme, turn on the

satellite tuner and select the satellite programme

you want to record. Leave the satellite tuner

turned on until the recorder finishes recording. If

you connect equipment with a timer function, you

can use the Synchro Rec function (page 55).

• Even if the timer is set for the same daily or

weekly programme, the timer recording cannot be

made if it overlaps with a programme that has

Press OPTIONS during recording to

select “Extend Rec.,” and press ENTER.

priority. “

” will appear next to the overlapped

setting in the Timer List. Check the priority order

of the settings.

• Even if the timer is set, timer recordings cannot be

made while recording a programme that has

priority.

• The Rec Mode Adjust function only works with a

timer recording. It does not function with Quick

Timer or Synchro Rec. In addition, the Rec Mode

Adjust function does not work when recording to

the HDD while “Auto Title Erase” of the “Timer

Settings” is set to “On” in the “Recording” setup.

Press M/m to select the duration time.

You can set the duration in increments of

10 minutes, for a maximum of 60

minutes.

Select “OK” and press ENTER.

One Touch Timer

If you use the SMARTLINK connection, you

can easily display the timer programming

menu.

When the TV is turned on or in standby

mode, press [TIMER]. The recorder

automatically turns on and the TV’s input is

switched to the recorder. The Timer

programming menu appears.

z Hint

If you are recording to the HDD or a DVD-RW (VR

mode) at a recording mode that is SP or lower and

is a 2x speed or higher disc, you can play the title as

it is being recorded by selecting the programme title

on the Title List (page 63).

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

4 Press ENTER.

Recording TV programmes

using the EPG

The sub menu appears with the

description of the programme displayed

in the information box.

The EPG function is a feature that simplifies

setting the timer. Just select the programme

you want to record in the EPG display. The

date, time, and channel of that programme are

set automatically.

HDD

DVD

Number

buttons

indicates that the programme is age

limited (page 88).

5 Select “Timer,” and press ENTER.

• In case of a current TV/radio broadcast

timer setting, your recorder will

immediately start recording.

</M/m/,,

ENTER

• In case of a future programme timer

setting, an event bar and a new icon

appear in the EPG display indicating

that a timer event is associated with that

programme.

PAGE

x REC

STOP

1 Press HDD or DVD.

When you record to a DVD, insert a

recordable DVD (see “1. Inserting a

Disc” on page 24).

2 Press

Your recorder will automatically begin

recording when the programme starts. To

modify the timer setting, see page 52.

Some examples of timer event icon

types are:

(red): Indicates that the whole

programme is set to be recorded.

(grey): Indicates that the programme

is set to be recorded, but only a part or

none of the programme can be recorded

(e.g. because of timer setting overlap).

(red): Indicates the programme is now

recording.

3 Select a programme using </M/m/

, or the number buttons.

To know more about the navigation

options in the EPG application, see

page 37.

Download from Www.Somanuals.com. All Manuals Search And Download.

b Notes

To scroll the EPG display by page

(Page mode)

• This function cannot be used when the

broadcaster does not include series information

with the programme data.

Press PAGE

while the EPG display

is turned on to display the previous/next ten

channels.

• Whether or not a programme is in a series is

determined by the broadcaster.

To stop recording during timer recording

Press x REC STOP. Note that it may take a

few seconds for the recorder to stop

recording.

Number

buttons

If the timer settings overlap

See page 46.

Colour

buttons

To extend the recording duration time

while recording (Guide Timer Extend)

See page 47.

</M/m/,,

ENTER

RETURN

To confirm, change, or cancel timer

recording

See “Checking/Changing/Cancelling Timer

Settings” (page 52).

z REC

z Hint

The Rec Mode Adjust function also works with this

timer method (page 46).

b Notes

1 Press

• This recorder is featured with an EPG timer auto

extend functionality that allows EPG timer

recordings to be made in case of an early start

(before the scheduled start time) or late finish

(after the scheduled end time).

• The EPG programme start and end time are

determined by the broadcaster.

Recording programmes using

Series Recording

Series Recording is a feature which uses

information from the Electronic Programme

Guide to provide the following features:

• Automatically record programmes in a

series.

2 Select a programme containing series

information using </M/m/, or the

number buttons.

“Series Info” appears under the blue bar

at the bottom of the EPG screen when the

programme contains series information.

• Record the subsequent parts of events

which are split.

• Provide links to recommended

programmes.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

3 Press the blue button (“Series Info”).

The Series Information display appears.

Press the red button to display the

Programme Guide and see more

information about the selected

programme. Press O RETURN to

return.

Confirming Series Recording settings

After you have set a programme for Series

Recording, the following icons appear in the

Series Information display.

(Series):

Indicates that the programme is a candidate

for Series Recording.

(Link):

Indicates that the series has been set for

Series Recording.

b Notes

• If a program is not completely recorded then the

repeat will be recorded.

• Series Recordings may overlap with EPG or

manual timer settings. Check timer settings using

the Timer List (page 52).

(repeat):

Indicates a repeat programme.

Recording Split Programmes

Movies and other programmes that are split

into 2 or more parts are called Split

(Recommended):

Programmes. If you set the timer for one part

of a Split Programme, the other parts are

automatically recorded. For example, if the

first half is set to be recorded, the last half

will be recorded automatically.

The event is recommended by

broadcaster as a link for current series.

Note that recommended programmes

will not be automatically set for

recording with Series Recording.

4 Press ENTER.

b Note

Only the earliest part of the Split Programme is

displayed on the Timer List.

Using the Quick Timer function

You can set the recorder to record in 30

minute increments.

Press z REC repeatedly to set the

duration.

Each press advances the time in 30 minute

increments. The maximum duration is six

hours.

5 Select “Series Timer.”

The selected programme is set for

recording and appears in the Timer List

(page 53). The other programmes in the

series will be set for recording (appear in

the Timer List) as each previous

recording is completed.

(normal recording)

For example, if there are three

The time counter decreases minute by minute

to 0:00, then the recorder stops recording (the

power does not turn off). Even if you turn off

the recorder during recording, the recorder

continues to record until the time counter

runs out.

programmes in a series, the second

programme will be set for recording only

after the first recording is finished. The

third programme will be set for recording

only after the second recording is

finished.

Download from Www.Somanuals.com. All Manuals Search And Download.

Note that the Quick Timer function does not

work if “TV Direct Rec.” is set to “On” in the

“Recording” setup (page 98).

2 Select the item you want to adjust,

and press ENTER.

The adjustment display appears.

To cancel the Quick Timer

Example: Rec. NR

Press z REC repeatedly until the counter

appears in the front panel display. The

recorder returns to normal recording mode.

“Rec. Mode”:

Adjusting the recording picture

quality and size

Selects the recording mode for the

desired recording time and picture

quality. For more information, see

“Recording mode” on page 44.

You can adjust the recording picture quality

and picture size.

“HDD Rec. Picture Size”/“DVD Rec.

Picture Size”:

Sets the picture size of the programme to

be recorded.

• Auto (HDD only) (default):

Automatically selects the actual picture

size.

• 4:3: Sets the picture size to 4:3.

• 16:9: Sets the picture size to 16:9 (wide

mode).

</M/m/,,

ENTER

“DVD Rec. Picture Size” works with

DVD-RWs/DVD-Rs (Video mode)

when the recording mode is set to HQ,

HSP, SP, LSP, or ESP. For all other

recording modes, the screen size is fixed

at “4:3.”

OPTIONS

For DVD-Rs/DVD-RWs (VR mode), the

actual picture size is recorded regardless

of the setting. For example, if a 16:9 size

picture is received, the disc records the

picture as 16:9 even if “DVD Rec.

Picture Size” is set to “4:3.”

1 Before recording starts, press

OPTIONS to select “Rec. Settings,”

and press ENTER.

For DVD+RWs/DVD+Rs, the screen

size is fixed at “4:3.”

“Rec. NR” (noise reduction): Reduces

noise contained in the video signal.

“Rec. Video Equalizer”: Adjusts the

picture in greater detail.

Press M/m to select the item you want to

adjust, then press ENTER.

• Contrast: Changes the contrast.

• Brightness: Changes the overall

brightness.

• Colour: Makes the colours deeper or

lighter.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

3 Adjust the setting using </M/m/,,

and press ENTER.

Checking/Changing/

Cancelling Timer

Settings

The default setting is underlined.

“Rec. NR”: (weak) Off 1 ~ 2 ~ 3

(strong)

“Rec. Video Equalizer”:

• Contrast: (weak) –3 ~ 0 ~ 3 (strong)

• Brightness: (dark) –3 ~ 0 ~ 3 (bright)

• Colour: (light) –3 ~ 0 ~ 3 (deep)

Repeat steps 2 and 3 to adjust any other

items.

RWVR RWVideo

HDD

RVR

RVideo

There are two ways to check, change or

cancel the timer settings.

• Using the EPG

• Using the Timer List

b Notes

• If one programme contains two picture sizes, the

selected size is recorded. However, if the 16:9

signal cannot be recorded as 16:9, it is recorded as

4:3.

• When playing a 16:9 size picture recorded as 4:3,

the image is fixed to 4:3 Letter Box regardless of

the setting in “TV Type” of “Video” setup

(page 92).

• Remnants of images may appear on your screen

when using “Rec. NR.”

• “Rec. Video Equalizer” does not affect the input

of the DV IN jack or digital TV pictures and does

not work with RGB signals.

SYSTEM

</M/m/,,

ENTER

RETURN

Creating chapters in a title

The recorder can automatically divide a

recording (a title) into chapters by inserting

chapter marks at approximately 6 minute

intervals during recording. To disable this

function, set “Auto Chapter” in the

“Recording” setup to “Off” (page 98).

When recording to the HDD, a DVD-R (VR

mode) or a DVD-RW (VR mode), you can

insert and erase chapter marks manually

(page 72).

Checking/Changing/Cancelling

using the EPG

1 Press

A timer setting can be identified using

the event bar and the timer event icon

displayed in the EPG display. For details,

see page 48.

b Note

When dubbing (page 76), the chapter marks in the

dubbing source are not retained in the dubbed title.

Download from Www.Somanuals.com. All Manuals Search And Download.

b Note

2 Press </M/m/, to select a future

timer event you want to check/change/

cancel. Then press ENTER.

If you set “Repeat rec.” to any option other than

“Off” in step 3, your EPG timer recording will be

converted into a standard timer recording. The

timer event icon disappears from the EPG display.

The Event Action menu appears.

Checking/Changing/Cancelling

using the Timer List

1 Press SYSTEM MENU.

The System Menu appears.

2 Select “TIMER LIST,” and press

ENTER.

The Timer List appears.

3 Press M/m to select an option. Then

press ENTER.

The sub menu appears:

“Modify”:

Changes the timer setting.

Select an item using </, and adjust

using M/m. Select “OK” and press

ENTER.

Timer information displays the recording

date, time, recording mode, etc.

Indicates that the setting is overlapped by

another setting.

(red):

Indicates the setting currently being

recorded.

“Erase”:

Erases the timer setting.

Indicates that the timer recording cannot

be recorded as set, such as for a timer

recording that cannot be recorded in the

selected recording mode.

“Check Overlap”:

Checks for overlapped settings.

Indicates the setting is being recorded to

the HDD.

Indicates the setting is being recorded to

a DVD.

Indicates the setting that the Update

function is set for.

Select “Close” to return to the EPG

display.

To change or cancel the setting, repeat

steps 2 and 3 above.

When all of the timer settings do not fit

on the list, the scroll bar appears.

To view the hidden timer settings, press

M/m.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

“Info”:

3 Select the timer setting you want to

check/change/cancel, and press

ENTER.

Displays the timer setting information

box along with the disc space required to

record the whole programme (according

to the selected recording mode).

The sub-menu appears.

4 Select one of the options, and press

ENTER.

“Modify”:

Changes the timer setting.

Select an item using </, and adjust

using M/m. Select “OK” and press

ENTER.

Press O RETURN to return to the

Timer List.

To change or cancel the setting, repeat

steps 3 and 4 above.

“Erase”:

Erases the timer setting.

Select “OK” and press ENTER.

When the timer settings overlap

The programme set last has priority.

Example: You set the timer in order of A, B,

and C (setting C has first priority)

will be cut off

“Check Overlap”:

Checks for overlapped settings.

Actual recording

If the end time of one recording and the

start time of another are the same

The end of programme A will be cut off.

Select “Close” to return to the Timer List.

Download from Www.Somanuals.com. All Manuals Search And Download.

To scroll the list display by page

(Page mode)

Recording From

Press

while the list display is turned

, the entire

Connected Equipment

on. Each time you press

Timer List changes to the next/previous page

of timer settings.

RWVR RWVideo

HDD

RVideo

RVR

To turn off the Timer List

Press O RETURN.

z Hint

HDD

DVD

For manual timer settings, you cannot modify the

timer setting for the current recording, but you can

extend the duration of the recording time while

recording (page 47).

INPUT

SELECT

For timer settings using the EPG, you can modify

the timer setting for the current recording while

recording, but you cannot extend the duration of the

recording (even when recording is stopped).

</M/m/,,

b Notes

ENTER

• Even if the timer is set, timer recordings cannot be

made while recording a programme that has

priority.

OPTIONS

• Even if the timer is set for the same daily or

weekly programme, the timer recording cannot be

made if it overlaps with a programme that has

REC MODE

c z

SYNCHRO

REC

z REC

x REC

STOP

priority. “

” will appear next to the overlapped

setting in the Timer List. Check the priority order

of the settings.

Auto Title Erase (HDD only)

If there is not enough space for a timer

recording, the recorder automatically erases

old titles recorded on the HDD. The oldest,

played title is erased. Set “Auto Title Erase”

of the “Timer Settings” to “On” in the

“Recording” setup (page 97). Protected titles

are not erased.

Recording from connected

equipment with a timer

(Synchro Rec)

You can set the recorder to automatically

record programmes from connected

equipment that has a timer function (such as

a satellite tuner). Connect the equipment to

the LINE 3 jack of the recorder (page 23).

When the connected equipment turns on, the

recorder starts recording a programme from

the LINE 3 jack.

1 Before recording, select HDD or DVD.

If you select DVD, insert a recordable

DVD (see “1. Inserting a Disc” on

page 24).

2 Set “Synchro Rec.” to “Record to

HDD” or “Record to DVD” in the

“Recording” setup (page 98).

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

b Notes

3 Press INPUT SELECT repeatedly to

select “L3.”

• The recorder starts recording only after detecting

a video signal from the connected equipment. The

beginning of the programme may not be recorded

regardless of whether or not the recorder’s power

is on or off.

4 Select the desired audio signal when

recording a bilingual programme to

the HDD or DVD-RWs/DVD-Rs (VR

mode).

• During Synchro-Recording, other operations,

such as normal recording, cannot be performed.

• To use the connected equipment while the

recorder is standing by for Synchro-Recording,

cancel Synchro-Recording by pressing c z

SYNCHRO REC. Be sure to turn off the

connected equipment and press c z SYNCHRO

REC to reset Synchro-Recording before the timer

recording starts.

Press OPTIONS to select “Line Audio

Input,” and press ENTER. Then select

“Bilingual,” and press ENTER.

5 Press REC MODE repeatedly to select

the recording mode.

For details about the recording mode, see

page 44.

• The Synchro Rec function does not work with

some tuners. For details, see the tuner’s operating

instructions.

6 Set the timer on the connected

equipment to the time of the

programme you want to record, and

turn it off.

If the timer settings of a Synchro-

Recording and another timer recording

overlap

Regardless of whether or not the programme

is a Synchro Rec programme, the programme

that starts first has priority and the second

programme starts recording only after the

first programme has finished.

7 Press c z SYNCHRO REC.

The SYNCHRO REC indicator lights up

on the front panel. The recorder is ready

to start Synchro-Recording.

The recorder automatically starts

recording when it receives an input

signal from the connected equipment.

The recorder stops recording when the

connected equipment turns off.

First

programme

Second

programme

To stop recording

will be cut off

Press x REC STOP or c z SYNCHRO

REC.

To cancel Synchro Rec

Press c z SYNCHRO REC.

The SYNCHRO REC indicator on the

recorder turns off.

Download from Www.Somanuals.com. All Manuals Search And Download.

If you connect a digital video camera with

a DV IN jack

See “DV Dubbing” on page 82 for an

explanation of how to record from the DV IN

jack.

Recording from connected

equipment without a timer

You can record from a connected VCR or

similar device. To connect a VCR or similar

device, see “Connecting a VCR or Similar

Device” on page 21. Use the DV IN jack on

the front panel if the equipment has a DV

output jack (i.LINK jack).

z Hint

You can adjust the settings for the recording picture

before recording. See “Adjusting the recording

picture quality and size” on page 51.

b Notes

1 Press HDD or DVD.

If you select DVD, insert a recordable

DVD (see “1. Inserting a Disc” on

page 24).

• When recording a video game image, the screen

may not be clear.

• Any programme that contains a Copy-Never copy

guard signal cannot be recorded. The recorder

continues to record, but a blank screen will be

recorded.

2 Press INPUT SELECT to select an input

source according to the connection

you made.

The front panel display changes as

follows:

programme

position

3 Select the desired audio signal when

recording a bilingual programme to

the HDD or DVD-RWs/DVD-Rs (VR

mode).

Press OPTIONS to select “Line Audio

Input,” and press ENTER. Then select

“Bilingual,” and press ENTER.

4 Press REC MODE repeatedly to select

the recording mode.

For details about the recording mode, see

page 44.

5 Insert the source tape into the

connected equipment and set to

playback pause.

6 Press z REC.

This recorder starts recording.

7 Press the pause (or play) button on the

connected equipment to cancel the

playback pause status.

The connected equipment starts playback

and the playback image is recorded by

this recorder.

To stop recording, press x REC STOP

on this recorder.

Download from Www.Somanuals.com. All Manuals Search And Download.

3 Select the title, and press ENTER.

The sub-menu appears.

Playback

Playing

4 Select “Play,” and press ENTER.

Playback starts from the selected title.

To use the DVD’s Menu

HDD

RWVR RWVideo

When you play a DVD VIDEO, or a finalised

DVD+RW, DVD-RW (Video mode),

DVD+R, or DVD-R (Video mode), you can

display the disc’s menu by pressing TOP

MENU or MENU.

RVideo

RVR

DVD VCD

DATA DVD DATA CD

HDD

DVD

To play VIDEO CDs with PBC functions

PBC (Playback Control) allows you to play

VIDEO CDs interactively using the menu on

your TV screen.

When you start playing a VIDEO CD with

PBC functions, the menu appears.

Select an item using the number buttons and

press ENTER. Then, follow the instructions

in the menu (press H when “Press

SELECT” appears).

Number

buttons

AUDIO

TOP MENU

SUBTITLE

TITLE LIST

</M/m/,,

ENTER

OPTIONS

The PBC function of Super VIDEO CDs does

not work with this recorder. Super VIDEO

CDs are played in continuous play mode

only.

To change the angles

If various angles (multi-angles) for a scene

are recorded on the disc, “

” appears in

the front panel display. Press OPTIONS

during playback to select “Change Angle,”

and press ENTER.

1 ^{Press HDD or DVD.}

• If you select DVD, insert a disc (see “1.

Inserting a Disc” on page 24).

To stop playback

Press x.

• If you insert a DVD VIDEO, VIDEO

CD, CD, DATA DVD, or DATA CD,

press H. Playback starts.

To playback quickly with sound (Scan

Audio)

When you press M during playback of a

title recorded in the HDD, you can play

quickly with dialogue or sound (“x1.3”

appears).

2 Press TITLE LIST.

For details about the Title List, see “3.

Playing the Recorded Programme (Title

List)” on page 26.

Example: DVD+RW

No sound is output when you press M two

or more times to change search speed.

Download from Www.Somanuals.com. All Manuals Search And Download.

To resume playback from the point where

you stopped (Resume Play)

To lock the disc tray (Child Lock)

You can lock the disc tray to prevent children

from ejecting the disc.

When the recorder is turned on, hold down x

until “LOCKED” appears in the front panel

display. The Z (open/close) button does not

work while the Child Lock is set.

When you press H again after you stop

playback, the recorder resumes playback

from the point where you pressed x.

To start from the beginning, press OPTIONS

to select “Play Beginning,” and press

ENTER. Playback starts from the beginning

of the title/track/scene.

To unlock the disc tray, hold down x until

“UNLOCKED” appears in the front panel

display when the recorder is turned on.

The point where you stopped playing is

cleared when:

One Touch Play

If you use the SMARTLINK connection, you

can easily start playing.

Press H. The recorder and your TV

automatically turn on and the TV’s input is

switched to the recorder. Playback starts

automatically.

– you open the disc tray (except for HDD).

– you play another title (except for HDD).

– you switch the Title List menu to Original

or Playlist (HDD/DVD-RWs/DVD-Rs in

VR mode only).

– you edit the title after stopping playback.

– you change the settings on the recorder.

– you turn off the recorder (VIDEO CD/CD/

DATA DVD/DATA CD only).

One Touch Menu

If you use the SMARTLINK connection, you

can easily display the Title List.

Press TITLE LIST. The recorder and your

TV automatically turn on and the TV’s input

is switched to the recorder. The Title List

appears.

– you make a recording (except for HDD/

DVD-RWs/DVD-Rs in VR mode).

– you disconnect the mains lead.

b Note

You cannot resume playback during TV Pause.

To play restricted DVDs (Parental Control)

If you play a restricted DVD, the message

“Do you want to temporarily change the

Parental Control level to *?” appears on your

TV screen.

z Hints

• You can also use the H button in step 3

(page 58) to start playback.

• Even if you select “Factory Setup” in the

“Others” setup (page 101), the Child Lock

remains set.

Select “OK” and press ENTER.

The display for entering your password

appears.

Enter your four-digit password using the

number buttons.

Press ENTER to select “OK.”

The recorder starts playback.

To register or change the password, see

“Parental Control (DVD VIDEO only)” on

page 98.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback options

To check the position of the buttons below, see the illustration on page 58.

For MP3 or JPEG operations, see “Playing MP3 Audio Tracks or JPEG Image Files” on

page 65.

Buttons

Operations

AUDIO

Selects one of the audio tracks recorded on the disc when pressed

repeatedly in normal playback mode.

RVR

RWVR

HDD

: Selects the language.

DVD

HDD

DVD VCD CD

RWVR

: Selects the main or sub sound.

RVR

: Selects stereo or monaural audio tracks.

VCD CD

SUBTITLE

Selects a subtitle language when pressed repeatedly.

Replays the scene/briefly fast forwards the scene.

DVD

(instant replay/

instant advance)

RWVR

HDD

RVR

RWVideo

RVideo

DVD

. (previous)/> (next)

Goes to the beginning of the previous/next title/chapter/scene/

track.

For the HDD, you cannot go to the beginning of the previous/

next title.

Fast reverses/fast forwards the disc when pressed during

playback.

(fast reverse/fast forward)

Search speed changes as follows:

fast reverse fast forward

m1 T t 1M

m2 T T t t 2M

m3 T T T t t t 3M

When you press and hold the button, fast forward/fast reverse

continues at the selected speed until you release the button.

When you press M once during playback of a title recorded in

the HDD, you can play quickly with sound (“x1.3” appears).

^*2m3 and 3M are only available for the HDD and DVDs.

Plays in slow motion when pressed for more than one second in

pause mode.

(slow, freeze frame)

Plays one frame at a time when pressed briefly in pause mode.

RWVR

HDD

RVR

RWVideo

RVideo

VCD

DVD

* Playback direction only

X (pause)

Pauses playback.

To resume normal playback, press H.

Download from Www.Somanuals.com. All Manuals Search And Download.

b Notes

2 Select an item, and press ENTER.

The adjustment display appears.

“FNR” (frame noise reduction):

Reduces noise contained in the

luminance element of the video signal.

“BNR” (block noise reduction):

Reduces “block noise” or mosaic like

patterns in the picture.

• Angles and subtitles cannot be changed with titles

recorded on this recorder.

• Slideshows made with a DVD camcorder can

only be played. Other play functions, such as fast

forward, cannot be used.

Notes on playing DTS sound tracks on a

“MNR” (mosquito noise reduction):

Reduces the faint noise appearing around

the outlines of the images. The noise

reduction effects are automatically

adjusted within each setting range

according to the video bit rate and other

factors.

• When playing DTS-encoded CDs, excessive

noise will be heard from the LINE1-TV/LINE 3/

LINE 2 OUT (R-AUDIO-L) jacks. To avoid

possible damage to the audio system, the

consumer should take proper precautions when

the LINE1-TV/LINE 3/LINE 2 OUT (R-AUDIO-

L) jacks of the recorder are connected to an

amplification system. To enjoy DTS Digital

Surround™ playback, an external DTS decoder

must be connected to the DIGITAL OUT jack of

the recorder.

“Sharpness”:

Sharpens the outlines of the images.

“PB Video Equalizer” (Playback video

equalizer):

Adjusts the picture in greater detail.

Select an item and press ENTER.

• Contrast: changes the contrast.

• Brightness: changes the overall

brightness.

• Set the sound to “Stereo” using the AUDIO

button when you play DTS sound tracks on a CD

(page 60).

Notes on playing DVDs with a DTS sound

track

DTS audio signals are output only through the

DIGITAL OUT (COAXIAL) jack.

When you play a DVD with DTS sound tracks, set

“DTS” to “On” in the “Audio” setup (page 95).

• Colour: makes the colours deeper or

lighter.

• Hue: changes the colour balance.

3 Press </,to adjust the setting, and

press ENTER.

Adjusting the picture quality

The default settings are underlined.

“FNR”: (weak) Off

“BNR”: (weak) Off

“MNR”: (weak) Off

3 (strong)

HDD

RWVR RWVideo

RVideo

RVR

DVD VCD

“Sharpness”*: (weak) Off

(strong)

“PB Video Equalizer”:

• Contrast: (weak) –3 ~ 0 ~ 3 (strong)

• Brightness: (dark) –3 ~ 0 ~ 3 (bright)

• Colour: (light) –3 ~ 0 ~ 3 (deep)

• Hue: (red) –3 ~ 0 ~ 3 (green)

1 Press OPTIONS during playback to

select “Video Settings,” and press

ENTER.

Repeat steps 2 and 3 to adjust any other

items.

* “1” softens the outlines of the images. “2”

enhances the outlines and “3” enhances them

more than “2.”

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

b Notes

• If the outlines of the images on your screen

become blurred, set “BNR” and/or “MNR” to

“Off.”

Pausing a TV Broadcast (TV

Pause)

• Depending on the disc or the scene being played,

the above BNR, MNR, or FNR effects may be

hard to discern. And, these functions may not

work with some screen sizes.

• When using the “Sharpness” function, noise

found in the title may become more apparent. In

this case, it is recommended that you use the BNR

function with the “Sharpness” function. If the

condition still does not improve, set the

“Sharpness” level to “Off.”

You can pause a current TV broadcast, and

then continue watching the programme at a

later time. This is useful when you receive an

unexpected phone call or visitor while

watching TV.

1 While viewing a TV broadcast with

this recorder, press X.

The picture pauses. You can pause the

picture for up to three hours.

Adjusting the delay between

the picture and sound (AV

SYNC)

HDD

RWVR RWVideo

RVideo

RVR

DVD VCD

1 Press OPTIONS during playback to

select “Audio Settings,” and press

ENTER.

TV pause

2 Select “AV SYNC,” and press ENTER.

“AV SYNC”:

2 Press X or H again to resume

When the video is delayed, this function

delays the audio for synchronization with

the video (0 to 120 milliseconds). Larger

numbers indicate a longer audio delay for

synchronization with the video. When

dubbing to a VCR or other video

recording equipment, be sure to return

this setting to 0 ms (default).

watching the programme.

b Notes

• Paused titles are not saved to the HDD.

• This function is cancelled when:

– x (stop) is pressed.

– PROG +/– is pressed.

– DVD is pressed.

– Z (open/close) is pressed.

– TITLE LIST is pressed.

– INPUT SELECT is pressed.

– the recorder is turned off.

3 Press</, to adjust the setting, and

press ENTER.

– a timer recording or Synchro-Recording is

started.

– DV dubbing or regular dubbing is started.

• It may take one minute or more to resume

playback of the paused programme.

• Even if you fast forward the recorded programme,

there will always be a time difference of about

one minute or more between the recorded

programme and the current TV broadcast.

Download from Www.Somanuals.com. All Manuals Search And Download.

• While recording to the HDD:

Play another title on the HDD.

Play a previously recorded programme on a

DVD by pressing DVD.

Playing from the beginning of

the programme you are

recording (Chasing Playback)

• While recording to a DVD:

Play a previously recorded programme on

the HDD by pressing HDD.

RWVR

HDD

• WhilerecordingtoaDVD-RW(VRmode)^*1

Play another title on the same DVD-RW (VR

mode) disc.^*2

“Chasing Playback” allows you to view the

recorded part of a programme while the

recording is being made. You do not need to

wait until the recording finishes.

Simultaneous Rec and Play function does not

work when you record:

– on a 1x-speed DVD-RW.

– in the HQ or HSP recording mode.

Picture noise may appear depending upon the

condition of the recording, or when playing a

title recorded in the HQ or HSP recording mode.

The picture freezes for a few seconds when you

use fast forward/fast reverse or instant replay/

advance.

Press OPTIONS while recording to select

“Chasing Playback,” and press ENTER.

Playback starts from the beginning of the

programme you are recording.

When you fast forward to the point that you

are recording, Chasing Playback returns to

normal playback.

You can also play a DVD VIDEO, VIDEO

CD, Super VIDEO CD, CD, DATA DVD, or

DATA CD while recording on the HDD.

b Notes

• For DVD-RWs (VR mode), this function does not

work when recording:

– on a 1x-speed DVD-RW.

Example: Play another title on the HDD

while recording to the HDD.

– in the HQ or HSP recording mode.

• The DVD’s picture on your TV screen freezes for

a few seconds when you fast forward/fast reverse

or instant replay/advance the recording.

• Chasing Playback is possible from one minute or

more after recording starts.

• Even if you fast forward the recorded programme,

there will always be a time difference of about

one minute or more between the recorded

programme and the current TV broadcast.

While recording, press TITLE LIST to

display the HDD Title List.

Select the title you want to play, and

press ENTER.

Select “Play” from the sub-menu, and

press ENTER.

Playback starts from the selected title.

Example: Play a DVD while recording to

the HDD.

Playing a previous recording

while making another

(Simultaneous Rec and Play)

While recording, press DVD and insert

the DVD into the recorder.

Press TITLE LIST to display the DVD

Title List.

HDD

RWVR RWVideo

RVR

RVideo

DVD VCD

Select the title you want to play, and

press ENTER.

DATA DVD DATA CD

“Simultaneous Rec and Play” allows you to

view a previously recorded programme while

recording programmes. Playback continues

even if a timer recording starts. Use this

function as follows:

Select “Play” from the sub-menu, and

press ENTER.

Playback starts from the selected title.

b Note

You cannot play a DVD or VIDEO CD recorded in

the NTSC colour system while recording on the

HDD. When playing a VIDEO CD, be sure to set

“Colour System” to “PAL” in the “Video” setup

(page 94).

Download from Www.Somanuals.com. All Manuals Search And Download.

The display for entering the number

appears.

Example: Title Search

Searching for a Title/

Chapter/Track, etc.

HDD

RWVR RWVideo

RVideo

RVR

DVD VCD

The number in parentheses indicates the

total number of titles, tracks, etc.

DATA DVD DATA CD

You can search a disc by title, chapter, scene

or track. As titles and tracks are assigned

individual numbers, select the title or track by

entering its number. You can also search for

a scene using the time code.

2 Press the number buttons to select the

number of the title, chapter, track,

time code, etc., you want.

For example: Time Search

To find a scene at 2 hours, 10 minutes,

and 20 seconds, enter “21020.”

If you make a mistake, select another

number.

Number

buttons

3 Press ENTER.

The recorder starts playback from the

selected number.

b Note

“Title Search” is not applicable to the HDD.

ENTER

OPTIONS

1 Press OPTIONS during playback to

select a search method, and press

ENTER.

“Title Search” (for DVDs)

“Chapter Search” (for HDD/DVDs)

“Track Search” (for CDs/DATA CDs)

“Search” (for VIDEO CDs)

“Album Search” (for DATA DVDs/

DATA CDs)

“Time Search” (for HDD/DVDs):

Searches for a starting point by entering

the time code.

“File Search” (for DATA DVDs/DATA

CDs)

Download from Www.Somanuals.com. All Manuals Search And Download.

To stop playback or slideshow

Press x.

Playing MP3 Audio

Tracks or JPEG Image

Files

To pause playback or slideshow

Press X.

To play the beginning of the track

Press OPTIONS to select “Play Beginning,”

and press ENTER.

DATA DVD DATA CD

You can play MP3 audio tracks and JPEG

image files on DATA CDs (CD-ROMs/CD-

Rs/CD-RWs) or JPEG image files on DATA

DVDs (DVD-ROMs/DVD+RWs/DVD+Rs/

DVD-RWs/DVD-Rs).

To fast forward or review a track

Press m/M during playback.

To go to the next or previous MP3 audio

track or JPEG image file

Press . or > during playback. If you

repeatedly press . or >, you will go to

the next or previous album. (MP3 audio track

only)

To go to the next or previous album

AUDIO

DISPLAY

TIME/TEXT

Press

during playback or slideshow.

To rotate a picture

Press OPTIONS while the JPEG image is

displayed to select “Rotate Right” or “Rotate

Left,” and press ENTER.

</M/m/,,

ENTER

OPTIONS

z Hints

• Press the AUDIO button to switch between

stereo or monaural audio tracks.

• You can rotate a JPEG image by using the </,

buttons when the image is displayed.

• Press DISPLAY repeatedly to show information

about the JPEG album or image on your TV

screen. Then press TIME/TEXT to toggle

between the current selected image number and

album number.

1 Insert a disc.

b Notes

See “1. Inserting a Disc” on page 24.

• Some JPEG files, especially files of three million

pixels or more, may lengthen the slideshow

interval.

2 Press H.

For MP3 discs, playback starts from the

first MP3 audio track on the disc.

For JPEG files, a slideshow of the

pictures on the disc begins.

• Rotated JPEG images will not be saved when you

switch to another folder.

• Images larger than 720 × 480 will be reduced to

720 × 480 when displayed.

If the disc contains MP3 audio tracks and

JPEG image files, only the JPEG image

files are played back when H is

pressed.

• The following images are not displayed:

– progressive JPEG image files

– greyscale JPEG image files

– 4:1:1 JPEG image files

• When you attempt to play a broken file or a file

that does not satisfy the play conditions,

appears but the recorder cannot play the file.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

About MP3 audio tracks and

JPEG image files

MP3 audio tracks or JPEG

image files that the recorder

can play

MP3 is an audio compression technology that

satisfies certain ISO/MPEG regulations.

JPEG is an image compression technology.

You can play MP3 (MPEG1 Audio Layer 3)

format audio tracks and JPEG image files on

DATA CDs (CD-ROMs/CD-Rs/CD-RWs)

or JPEG image files on DATA DVDs (DVD-

ROMs/DVD+RWs/DVD+Rs/DVD-RWs/

DVD-Rs).

DATA CDs must be recorded according to

ISO9660 Level 1, Level 2 or Joliet format for

the recorder to recognize the MP3 tracks.

You can also play discs recorded in

The recorder can play the following tracks

and files:

– MP3 audio tracks with the extension

“.mp3.”

– JPEG image files with the extension “.jpeg”

or “.jpg.”

– JPEG image files that conform to the DCF*

image file format.

* “Design rule for Camera File system”: Image

standards for digital cameras regulated by JEITA

(Japan Electronics and Information Technology

Industries Association).

MultiSession/Border.

b Notes

See the instructions supplied with the disc

drives and the recording software (not

supplied) for details on the recording format.

• The recorder will play any data with the extension

“.mp3,” “.jpeg,” or “.jpg,” even if they are not in

MP3 or JPEG format. Playing these data may

generate a loud noise which could damage your

speaker system.

Note on MultiSession/Border discs

If audio tracks and images in Music CD

format or Video CD format are recorded in

the first session/border, only the first session/

border will be played back.

• The recorder does not conform to audio tracks in

mp3PRO format.

• Some files cannot be played.

b Note

The recorder may not be able to play some DATA

CDs created in the Packet Write format.

Download from Www.Somanuals.com. All Manuals Search And Download.

b Notes

• Depending on the software you use to create the

DATA DVD/DATA CD, the playback order may

differ from the above illustration.

About playback order of

albums, tracks, and files

• No more than a total of 999 individual folders can

be played. (Folders that do not contain JPEG/

MP3 files are counted as well.)

Albums play in the following order:

Structure of disc contents

• No more than a total of 999 folders and 9999 files

can be played. (Files other than JPEG/MP3 files,

and folders that do not contain JPEG/MP3 files

are counted as well.)

Tree 1 Tree 2 Tree 3 Tree 4 Tree 5

ROOT

• No more than 999 folders and files can be

recognized in a single folder. (Folders that do not

contain JPEG/MP3 files are counted as well.)

• Proceeding to the next or another album may take

some time.

• This recorder supports MP3 audio bit rates up to

320 kbps.

Album

MP3 audio track/

JPEG image file

When you insert a DATA CD/DATA DVD

and press H, the numbered tracks (or files)

are played sequentially, from 1 through 7.

For JPEG image files, press

to go to the

next album. (For instance, when you want to

go from 1 to 2.) Any sub-albums/tracks (or

files) contained within a currently selected

album take priority over the next album in the

same tree. (Example: C contains D so 4 is

played before 5.)

z Hints

• If you add numbers (01, 02, 03, etc.) to the front

of the track/file names when you store the tracks

(or files) in a disc, the tracks and files will be

played in that order.

• Since a disc with many trees takes longer to start

playback, it is recommended that you create

albums with no more than two trees.

Download from Www.Somanuals.com. All Manuals Search And Download.

Erasing and Editing

Before Editing

This recorder offers various edit options for

various disc types.

b Notes

• You may lose the edited contents if you remove

the disc or a timer recording starts while editing.

• DVD discs created by DVD video cameras

cannot be edited on this recorder.

• If a message appears and indicates that the disc’s

control information is full, erase or edit

unnecessary titles.

• When editing a DVD+R or DVD-R, finish all

editing before finalising the disc. You cannot edit

a finalised disc.

RWVR

HDD

RVR

RWVideo

Edit features

Original

title

Playlist

title

Original

title

Playlist

title

RVideo

Erase (page 69)

Yes

Yes*

Yes

Protect (page 69)

Title Name (page 69)

A-B Erase (page 70)

Erase Titles (page 70)

Divide (page 71)

Yes

Set Thumbnail (page 69)

Chapter mark (page 72)

Yes

Creating and Editing a

Playlist (page 72)

Change Order (page 74)

Combine (page 74)

Yes

* DVD+RW only

Download from Www.Somanuals.com. All Manuals Search And Download.

To open up disc space

To open up disc space on a DVD+RW or

DVD-RW (Video mode), erase the title with

the largest number in the title list.

Erasing and Editing a

Title

Largest title number

RWVR RWVideo

HDD

RVideo

RVR

This section explains the basic edit functions.

Note that editing is irreversible. To edit the

HDD or DVD-RWs/DVD-Rs (VR mode)

without changing the original recordings,

create a Playlist title (page 72).

For the HDD and DVD-RWs (VR mode),

you can erase any title.

For DVD-Rs and DVD+Rs, the available disc

space does not increase even if you erase

titles.

See “Erasing and Editing a Title” on page 69

or “Erasing multiple titles (Erase Titles)” on

page 70.

CHAPTER

MARK

CHAPTER

ERASE

MARK

TITLE LIST

</M/m/,,

To switch between the Playlist and

Original Title List

ENTER

RETURN

OPTIONS

You can display the Playlist titles in the Title

List (Playlist), or the Original titles in the

Title List (Original). To switch the two Title

Lists, press </, while a Title List is

displayed. To create and edit a Playlist, see

page 72.

1 Press TITLE LIST.

For HDD titles or DVD-RWs/DVD-Rs

in VR mode, press </, to switch the

Title Lists, if necessary.

2 Select a title, and press ENTER.

The sub-menu appears.

3 Select an option, and press ENTER.

You can make the following edits to the

title.

“Erase”: Erases the selected title. Select

“OK” when asked for confirmation.

“Protect”: Protects the title. “ ” appears

next to the protected title.

“Title Name”: Allows you to enter or re-

enter a title name (page 31).

“A-B Erase”: Erases a section of the title

(page 70).

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

“Divide”: Divides a title into two titles

(page 71).

“Set Thumbnail”: Changes the title’s

thumbnail picture that appears in the

Title List (page 27).

4 Repeat step 3 to select all of the titles

you want to erase.

5 When you finish selecting titles,

select “OK,” and press ENTER.

The list of the titles to be erased appears

for confirmation.

“Make a Playlist”: Adds the entire title to

the Playlist title as one scene (page 74).

• To change the selection, select

“Change,” and repeat from step 3.

z Hints

6 Select “OK” and press ENTER.

• You can erase multiple titles at one time

(page 70).

The titles are erased.

• You can automatically erase titles that have

already played (page 97).

• You can label or re-label DVDs (page 32).

To erase all titles on the disc

You can reformat the HDD, DVD+RW, or

DVD-RW to make the disc or drive blank.

To format the HDD, see “Format” on

page 101.

b Note

DVD-RW/DVD-R (VR mode) playlist titles cannot

be protected.

To format a DVD+RW or DVD-RW disc, see

“8. Reformatting a disc” on page 35.

Erasing multiple titles (Erase

Titles)

Erasing a section of a title

(A-B Erase)

RWVR RWVideo

HDD

RVideo

RVR

RWVR

RVR

HDD

You can select and erase more than one title

at one time using the OPTIONS menu.

You can select a section (scene) in a title and

erase it. Note that erasing scenes in a title

cannot be undone.

1 Press TITLE LIST.

For HDD titles or DVD-RWs/DVD-Rs

in VR mode, press </, to switch the

Title Lists, if necessary.

1 After step 2 of “Erasing and Editing a

Title,” select “A-B Erase” and press

ENTER.

2 Press OPTIONS to select “Erase

Titles,” and press ENTER.

The display for selecting titles to be

erased appears.

The display for setting point A appears.

The title starts to play.

• To return to the beginning of the title,

press X and then press ..

3 Select a title, and press ENTER.

A check mark appears in the check box

next to the selected title.

Playback point

• To clear the check mark, press ENTER

again.

• To clear all of check marks, select

“Reset.”

2 Select point A using m/M, and

press ENTER.

Playback pauses.

Download from Www.Somanuals.com. All Manuals Search And Download.

3 Press ENTER if point A is correct.

If point A is incorrect, select point A

using c/C, and press ENTER. The

display for setting point B appears.

Dividing a title (Divide)

RVR

RWVR

HDD

If you want to dub a long title to a disc but do

not want to reduce the picture quality, divide

the title into two shorter titles. Note that

dividing a title cannot be undone.

* Only playlist titles can be divided for DVD-RWs/

DVD-Rs (VR mode).

4 Select point B using m/M, and

press ENTER.

Playback pauses.

5 Press ENTER if point B is correct.

If point B is incorrect, select point B

using c/C, and press ENTER. The

display asks for confirmation.

• To reset point A, press M and

O RETURN, and go to step 2.

• To reset point B, press M and repeat

step 4.

1 Press TITLE LIST.

Press </, to switch the Title Lists, if

necessary.

2 Select a title, and press ENTER.

The sub-menu appears.

• To preview the title without scenes to

be erased, select “Preview” (except for

DVD+RWs).

3 Select “Divide,” and press ENTER.

The display for setting the dividing point

appears, and the title starts to play.

• To return to the beginning of the title,

press X and then press ..

6 Select “OK,” and press ENTER.

The scene is erased. The display for

setting point A appears.

• To continue, go to step 2.

• To finish, select “Quit.”

z Hint

A chapter mark is inserted after the scene was

erased. The chapter mark divides the title into

separate chapters on either side of the mark.

b Notes

• Images or sound may be momentarily interrupted

at the point where you erase a section of a title.

• Sections shorter than five seconds may not be

erased.

4 Select the dividing point by pressing

m/M, and press ENTER.

Playback pauses.

• For DVD+RWs, the erased section may be

slightly different from the points you selected.

5 Press ENTER if the dividing point is

correct.

If the dividing point is incorrect, select

the dividing point using c/C, and

press ENTER. The display asks for

confirmation.

• To change the dividing point, press M.

6 Select “OK,” and press ENTER.

The title is divided in two.

z Hint

After a title is divided, the title name prior to

division is assigned to both the first and second

parts.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

Creating chapters manually

Creating and Editing a

Playlist

RVR

RWVR

HDD

You can manually insert a chapter mark at

any point you like during playback.

RWVR

RVR

HDD

Playlist edit allows you to edit or re-edit

without changing the actual recordings. You

can create up to 97 Playlist titles.

Press CHAPTER MARK at the point where

you want to divide the title into chapters.

Each time you press the button, “Marking ...”

appears on the screen and the scenes to the

left and right of the mark become separate

chapters.

Example: You have recorded the final few

matches of a football tournament on a DVD-

RW/DVD-R (VR mode). You want to create

a digest with the goal scenes and other

highlights, but you also want to keep the

original recording.

To erase chapter marks

You can combine two chapters by erasing the

chapter mark during playback.

Original

Press ./> to search for a chapter

number, and while displaying the chapter

containing the chapter mark you want to

erase, press CHAPTER MARK ERASE.

The current chapter combines with the

previous chapter.

Playlist

b Note

In this case, you can compile highlight scenes

as a Playlist title. You can even rearrange the

scene order within the Playlist title.

When dubbing, any chapter marks you enter will be

erased.

The Playlist title calls up data from the

original titles for playback. When an original

title is used for a Playlist title, the original

title cannot be edited and erased.

b Note

Playlist titles containing titles recorded with the

“Copy-Once” copy protection signal cannot be

dubbed or moved (page 78).

1 Press TITLE LIST.

If the Title List (Original) appears, press

2 Press OPTIONS to select “Create a

Playlist,” and press ENTER.

Download from Www.Somanuals.com. All Manuals Search And Download.

3 Select “Select,” and press ENTER.

9 When you finish adding scenes, press

4 Select the title you want to include in

the Playlist title, and press ENTER.

The display for setting the start point (IN)

appears. The title starts to play.

A Total duration of the selected

• To return to the beginning of the title,

press X and then press ..

scene

B Total number of scenes

C Selected scene

10 Select the scene you want to re-edit,

and press ENTER.

The sub-menu appears.

“Move”: Changes the scene order using

</, and press ENTER.

“Erase”: Erases the scene. When asked

for confirmation, select “OK.”

• To add more scenes, press M and go to

step 5.

5 Select the IN point using m/M,

and press ENTER.

Playback pauses.

• To add more scenes from another title,

select “Select” and go to step 4.

• To preview all of the captured scenes in

the listed order, select “Preview.”

6 Press ENTER if the IN point is correct.

If the IN point is incorrect, select the IN

point using c/C, and press ENTER.

The display for setting the end point

(OUT) appears.

11 When you finish editing the scene list,

select “OK,” and press ENTER.

7 Select the OUT point using m/M,

The title of the created Playlist is added

to the Title List (Playlist). The title name

is the title name of the first scene.

and press ENTER.

Playback pauses.

8 Press ENTER if the OUT point is

correct.

z Hint

If the OUT point is incorrect, select the

OUT point using c/C, and press

ENTER.

When a Playlist title is created, the IN and OUT

points will become chapter marks, and each scene

will become a chapter.

The selected scene is added to the scene

list.

• To add more scenes, go to step 5.

b Note

The picture may pause when the edited scene is

played.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

To add the entire title to the Playlist title

as one scene (Make a Playlist)

Combining multiple Playlist

titles (Combine)

Press TITLE LIST. If the Title List

(Playlist) appears, press ,.

RVR

RWVR

HDD

Select the title and press ENTER.

The sub-menu appears.

1 Press TITLE LIST.

If the Title List (Original) menu appears,

press <.

Select “Make a Playlist,” and press

ENTER.

The selected title is added to the Title List

(Playlist).

The title name is the same as the Original

title name.

2 Press OPTIONS to select “Combine,”

and press ENTER.

The display for selecting titles appears.

3 Select a title, and press ENTER.

A number indicating the order in which

you selected the title appears.

To cancel the selection, press ENTER

again.

To play the Playlist title

Press TITLE LIST. If the Title List

(Original) appears, press <.

Select a title, and press ENTER.

The sub-menu appears.

Select “Play,” and press ENTER.

Moving a Playlist title (Change

Order)

RVR

RWVR

4 Repeat step 3 to select all of the titles

you want to combine.

You can change the Playlist title order within

the Title List (Playlist).

To cancel all of the selections, select

“Reset.”

1 Press TITLE LIST.

5 Select “OK,” and press ENTER.

The list of titles to be combined appears.

To change the selection, select “Change”

and go to step 3.

If the Title List (Original) appears, press

2 Press OPTIONS to select “Change

Order,” and press ENTER.

6 Select “OK,” and press ENTER.

The titles are combined.

3 Select the title you want to move, and

press ENTER.

z Hint

4 Select a new location for the title

using M/m, and press ENTER.

The title moves to the new location.

• To move more titles, go to step 3.

• To finish, select “Quit,” and press

ENTER.

After titles are combined, the title name is the title

name of the first title prior to combination.

Download from Www.Somanuals.com. All Manuals Search And Download.

b Note

When the number of chapters in the title to be

combined exceeds the limit, the chapters at the end

are combined into a single chapter.

Dividing a Playlist title (Divide)

RVR

RWVR

HDD

You can divide a Playlist title. For operations,

see page 71.

Download from Www.Somanuals.com. All Manuals Search And Download.

b Notes

• You cannot make a recording while dubbing.

• To play a dubbed disc on other DVD equipment,

finalise the disc (page 33).

Dubbing (HDD y DVD)

• You cannot dub from DVD VIDEOs to the HDD.

• Thumbnails that you have set for the originally

recorded title (page 27) will not be retained in the

dubbed title.

• When dubbing to a DVD+R DL disc, the video

may be momentarily interrupted at the point

where the layers switch.

Before Dubbing

RWVR RWVideo

HDD

RVideo

RVR

In this section, “dubbing” refers to “copying

a recorded title on the internal hard disk drive

(HDD) to another disc, or vice versa.” You

can select to dub one title at a time (Title

Dubbing – see “Dubbing a single title (Title

Dubbing)” on page 79), or multiple titles all

at once (Multiple Title Dubbing – see

“Dubbing multiple titles (Dub Selected

Titles)” on page 80).

About “Dub Mode”

With this recorder, the recording mode for

dubbing is displayed as “Dub Mode.” Three

dubbing methods are available: High-speed

Dubbing, Original Dubbing, and Rec Mode

Conversion Dubbing. Read the following and

select according to the required time, disc

space, and picture quality.

Before you start, read the following

precautions, which are common to both

dubbing methods.

Dubbing at high-speed (High-speed

Dubbing)

If you want to record from a digital video

camera connected to the DV IN jack, see

“DV Dubbing” on page 82. To record from

equipment connected to the LINE IN jacks,

see “Recording from connected equipment

without a timer” on page 57.

RW^VR/ ^RWVideo

HDD

RVideo

RVR

Allows you to dub what you have stored in

the HDD to a high-speed DVD (8x-speed

DVD+RWs/6x-speed DVD-RWs/16x-speed

DVD+Rs/16x-speed DVD-Rs, or slower

versions of each disc type), without changing

the recording mode.

Set “Dub Mode” to “Fast” in the steps of

“Dubbing a single title (Title Dubbing)”

(page 79) or “Dubbing multiple titles (Dub

Selected Titles)” (page 80).

When dubbing multiple titles, you can select

“Fast” if there are one or more titles that can

be dubbed at high speed in the selected titles.

However, titles that cannot be dubbed at high

speed are dubbed in the Original Dubbing

mode.

Before you start…

• You cannot record both the main and sub

sound on DVD+RWs, DVD-RWs (Video

mode), DVD+Rs, or DVD-Rs (Video

mode). For bilingual programmes, set

“Bilingual Recording” of “DVD Rec.

Settings” to either “Main” (default) or

“Sub” in the “Recording” setup (page 97).

• The chapter marks in the dubbing source

are not retained in the dubbed title. When

“Auto Chapter” is set to “On” in the

“Recording” setup, chapter marks are

automatically inserted at approximately

6 minute intervals.

The minimum required time is as follows

(approximate).

z Hints

• When you dub a Playlist title, it is recorded as an

Original title.

• When dubbed from a DVD to the HDD, the

picture size and the sound types originally

recorded are retained.

Download from Www.Somanuals.com. All Manuals Search And Download.

b Notes

Required times for High-speed Dubbing from

HDD to DVD (for 60-minute programme)

• High-speed Dubbing is not available for the

following titles:

Speed^*26x

2.4x

– Titles recorded in HQ+.

– Titles that contain both main and sub sounds

(except DVD-RWs/DVD-Rs (VR mode)).

– Titles recorded in mixed picture size (4:3 and

16:9 etc.) (except DVD-RWs/DVD-Rs (VR

mode)).

High- High-

Rec. speed speed

mode DVD- DVD+

High- High- DVD+R

speed speed (Double

DVD-R DVD+R Layer)

– Dubbing from DVD to HDD

– Dubbing 16:9 size title from HDD to

DVD+RW/DVD+R

– When dubbing a title with a picture size of 16:9

recorded in LP, EP, or SLP mode to a DVD-RW

or DVD-R in Video mode.

Approx. Approx. Approx. Approx. Approx.

10min. 10min. 8 min. 8 min. 25min.

HSP Approx. Approx. Approx. Approx. Approx.

6 min. 6 min. 5 min. 5 min. 16min.

40 sec. 40 sec.

40 sec.

• When dubbed to a DVD-RW (Video mode)/

DVD+RW/DVD+R/DVD-R (Video mode), the

“seams” that are left over from editing may

remain on the disc. If you edit a title, use the

Original Dubbing or Rec Mode Conversion

Dubbing method. This will smooth out the

“seams.”

Approx. Approx. Approx. Approx. Approx.

5 min. 5 min. 3 min. 3 min. 12min.

45 sec. 45 sec. 30 sec.

LSP

ESP

Approx. Approx. Approx. Approx. Approx.

4 min. 4 min. 3 min. 3 min. 10min.

Approx. Approx. Approx. Approx. Approx.

3 min. 3 min. 2 min. 2 min. 8 min.

20 sec. 20 sec. 30 sec. 30 sec. 20 sec.

Original Dubbing

RWVideo

RWVR

HDD

Approx. Approx. Approx. Approx. Approx.

2 min. 2 min. 2 min. 2 min. 6 min.

RVR

RVideo

Original Dubbing allows you to make smooth

dubbings by de-emphasizing the “seams” that

are left over from editing. In this case, the

recording mode is set to the same recording

mode that the source title was recorded in.

To set the “Dub Mode” to “Original,” you

must make your selection from the “Dub

Selected Titles” display (page 80).

30 sec. 30 sec.

15 sec.

Approx. Approx. Approx. Approx. Approx.

1 min. 60 1 min. 60 60

40 sec. min. 15 sec. min. min.

SLP

Approx. Approx. Approx. Approx. Approx.

1 min. 60

15 sec. min.

56 sec. 60

min. min.

Note that you cannot select “Original” when

using the Dubbing method explained in

“Dubbing a single title (Title Dubbing)”

(page 79).

The values in the above table are for reference

only. Actual times for dubbing also require time

for creating disc’s control information and other

data.

This is the maximum recording speed of this

recorder. The recording speed cannot exceed the

value indicated in the above table even when

using discs that support higher recording speeds.

In addition, depending on the disc condition, the

recorder may be unable to record at the

maximum recording speed indicated in the table.

High-speed dubbing is not available when

dubbing titles recorded in EP and SLP mode to

DVD+RWs and DVD+Rs.

b Note

If the recording mode of the dubbing source title is

unknown when dubbing from a DVD to the HDD,

“Dub Mode” is automatically set to “SP” in the

“Dub Selected Titles” display (page 80).

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

Rec Mode Conversion Dubbing

Dubbing restriction

You cannot dub movies and other DVD

VIDEOs to the HDD. Also, when dubbing

from a DVD to the HDD, a grey, blank screen

will be recorded for scenes that contain a

copy protection signal.

RWVR

RWVideo

HDD

RVR

RVideo

Allows you to dub from the HDD to a DVD

or vice versa, in a dubbing mode that differs

from the original recordings. For example,

when you dub an HQ title (data size is large)

in SP mode, you can reduce the data size,

saving more titles using less space.

Copy

protection

signals

Dubbing

Select a mode different from the original

recording in “Dub Mode” in the steps of

“Dubbing a single title (Title Dubbing)”

(page 79) or “Dubbing multiple titles (Dub

Selected Titles)” (page 80). When dubbing

multiple titles, all of the selected titles will be

recorded in same recording mode.

Copy-Free

(No copy

protection

signal)

RWVR

RWVideo

HDD

RVideo

RVR

Copy-Once

RWVR

RVR

z Hint

Dubbing in the recording mode of the source title

smoothes out the “seams” that are left over from

editing.

* CPRM-compatible DVD-RWs/DVD-Rs (VR

mode) only

CPRM (Content Protection for Recordable

Media) is a coding technology that protects

copyrights for images.

b Notes

• For a title whose picture size (16:9 or 4:3) is

mixed:

Move

HDD

– When dubbed from the HDD to DVD-RWs/

DVD-Rs (Video mode), the picture size is

determined by the setting in “DVD Rec. Picture

Size” (page 51).

– When dubbed from the HDD to DVD-RWs/

DVD-Rs (Video mode) in LP, EP or SLP mode,

the picture size is always 4:3.

– When dubbed from HDD to DVD+RW or

DVD+R, the picture size is always 4:3.

• The picture quality will not improve even if a title

is converted to a recording mode of better picture

quality.

RW^VR/ RVR

Titles containing “Copy-Once” copy

protection signals can be moved only from

HDD to DVD-RW/DVD-R (VR mode)*

(after the title is moved, the original title in

the HDD is erased). The “Move” function is

performed using the same procedure as

dubbing (page 79). Titles containing “Copy-

Once” copy protection signals are indicated

with

b Notes

• The following titles in the HDD cannot be moved.

– Protected titles

– Playlist titles

– Original titles referenced from the playlist

• When dubbing (Move) is stopped partway, no

part of the title will be moved to the dubbing

target. However, note that this will decrease the

free disc space for DVD+Rs/DVD-Rs.

• Even if you erase a scene that contains a copy

protection signal, the recording restrictions on

that title are retained.

* CPRM-compatible DVD-RWs/DVD-Rs (VR

mode) only.

Download from Www.Somanuals.com. All Manuals Search And Download.

6 Select “Dub Mode.”

Dubbing

7 Select a dubbing mode using M/m.

Fast*

RWVR RWVideo

HDD

RVideo

RVR

* From the HDD to a DVD only.

Appears when High-speed Dubbing is

available for the title (page 76).

Dubbing a single title (Title

Dubbing)

8 Select “Start,” and press ENTER.

The remaining time of dubbing appears

in the front panel display.

1 ^{Insert the DVD that you are going to}

dub to or from.

2 Press HDD or DVD to select the

source.

To automatically adjust the dubbing mode

If there is not enough available space on the

target disc, the recorder automatically selects

a dubbing mode with lower picture quality

according to the available space. If there is

insufficient disc space in the selected

dubbing mode, the following display appears

after step 8.

3 Press TITLE LIST.

Press </, to switch the Title Lists, if

necessary.

4 Select a title, and press ENTER.

The sub-menu appears.

5 Select “Dubbing,” and press ENTER.

The display for selecting the dubbing

mode appears.

If a title with

(page 78) is selected

in the title list, a confirmation display is

displayed.

To “Move,” select “OK.”

Select “OK” and go to step 8.

To manually select another dubbing mode,

select “Cancel,” and go to step 7.

To stop dubbing

Press OPTIONS to select “Stop Dubbing,”

and press ENTER. When asked for

confirmation, select “OK,” and press

ENTER.

A Size of the title (approximate)

This is displayed in red when the size

exceeds the available space on the

dubbing target media.

When dubbing (Move) is stopped partway,

no part of the title will be moved to the

dubbing target. However, note that this will

decrease the free disc space for DVD+Rs/

DVD-Rs.

B Direction of dubbing

z Hint

C Available space on the disc to be

You can turn off the recorder during dubbing. The

recorder completes dubbing even after being turned

off.

dubbed (approximate)

D Information about the title to be

dubbed

E Dubbing mode and the space that

remains after dubbing

(approximate)

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

: Indicates titles containing

“Copy-Once” copy protection

signals (page 78). When you select

Dubbing multiple titles (Dub

Selected Titles)

a title with

for confirmation. To “Move,”

select “OK.”

, the display asks

A maximum of 30 selected titles can be

dubbed at once.

F Order of dubbing

1 Insert the DVD that you are going to

dub to or from.

6 Repeat step 5 to select all of the titles

you want to dub.

2 Press HDD or DVD to select the

source.

7 Select “OK,” and press ENTER.

The display for selecting the dubbing

mode appears.

3 Press TITLE LIST.

Press </, to switch the Title Lists, if

necessary.

8 Select a dubbing mode using M/m.

4 Press OPTIONS to select “Dub

Selected Titles,” and press ENTER.

Fast*

Original

5 Select titles in the order you want to

dub, and press ENTER.

The titles are numbered in the selected

order.

* From the HDD to a DVD only.

Appears when available for the title

(page 76).

9 Select “Start,” and press ENTER.

The remaining time of dubbing appears

in the front panel display.

• To cancel the selection, press ENTER

again.

• To cancel all of the selections, select

“Reset.”

To automatically adjust the dubbing mode

If there is not enough available space on the

target disc, the recorder automatically selects

a dubbing mode with lower picture quality

according to the available space. The same

dubbing mode is set for all of the titles. If disc

space is insufficient for the selected dubbing

mode, the following display appears after

step 9 of “Dubbing multiple titles (Dub

Selected Titles)” on page 80.

A Total size of the selected titles

This is displayed in red when the size

exceeds the available space on the

dubbing target media.

B Direction of dubbing

C Available space on the disc to be

dubbed (approximate)

Select “OK” and go to step 9.

To manually select another dubbing mode,

select “Cancel,” and go to step 8.

D “PL”: Indicates a Playlist title.

Download from Www.Somanuals.com. All Manuals Search And Download.

To stop dubbing

Press OPTIONS to select “Stop Dubbing,”

and press ENTER. When asked for

confirmation, select “OK,” and press

ENTER.

When dubbing (Move) is stopped partway,

no part of the title will be moved to the

dubbing target. However, note that this will

decrease the free disc space for DVD+Rs/

DVD-Rs.

z Hint

You can turn off the recorder during dubbing. The

recorder completes dubbing even after being turned

off.

Download from Www.Somanuals.com. All Manuals Search And Download.

b Notes

• You cannot make a recording while DV dubbing.

• The DV IN jack is for input only. It will not

output signals.

DV Dubbing

• You cannot use the DV IN jack when:

– signal input to the DV IN jack on the front panel

or recorder operation cannot be performed

correctly when using a digital video camera

(see “About i.LINK” on page 111). Connect the

camera to the LINE IN jack and follow the

instructions of “Recording from connected

equipment without a timer” on page 57.

– the input signal is not in DVC-SD format. Do

not connect a MICRO MV format digital video

camera even if it has an i.LINK jack.

– the images on the tape contain copy protection

signals, which limit recording.

Before DV Dubbing

This section explains dubbing with a digital

video camera via the DV IN jack on the front

panel. If you want to dub by way of the LINE

IN jacks, see “Recording from connected

equipment without a timer” on page 57.

The DV IN jack on this recorder conforms to

the i.LINK standard.

Follow the instructions in “Preparing for DV

dubbing,” and then move on to the section on

dubbing. For more information about

i.LINK, see “About i.LINK” on page 111.

• If you want to play the disc on other DVD

equipment, finalise the disc (page 33).

Hookups

DVD recorder

Preparing for DV dubbing

You can connect a digital video camera to the

DV IN jack on the recorder to record or edit

from a DV/Digital8 format tape. Operation is

straightforward because the recorder will fast

forward and rewind the tape for you – you do

not need to operate your digital video camera.

Do the following to start using the “DV Edit”

functions of this recorder.

to DV IN

i.LINK cable (not supplied)

See the instruction manual supplied with the

digital video camera as well before

connecting.

DV output

z Hint

If you plan to do additional editing on a disc after

the initial dub, use the DV IN jack and record on a

DVD-RW/DVD-R (VR mode) or HDD.

Digital video camera

: Signal flow

1 Press HDD or DVD to select the

recording destination.

If you select DVD, insert a disc (see “1.

Inserting a Disc” on page 24).

2 Insert the source DV/Digital8 format

tape into your digital video camera.

For the recorder to record or edit, your

digital video camera must be set to video

playback mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

b Notes

3 Press INPUT SELECT on the remote

repeatedly to select “DV.”

The front panel display changes as

follows:

• You cannot connect more than one piece of

digital video equipment to the recorder.

• You cannot control the recorder using another

device or another recorder of the same model.

• You cannot record date, time, or the contents of

the cassette memory onto the disc.

programme

position

• If you record from a DV/Digital8 format tape that

is recorded in multiple sound tracks, such as a

tape with multiple sampling frequencies (48 kHz,

44.1 kHz, or 32 kHz), no sound or an unnatural

sound will be output when playing back the

sampling frequency switch point on the disc.

• In order to use this recorder’s “Auto Chapter”

setting (page 84, 85), be sure to correctly set the

clock on your digital video camera before

shooting.

4 Press REC MODE on the remote

repeatedly to select the recording

mode.

The recording mode changes as follows:

• The recorded picture may be momentarily

affected or the start and end points of a title may

be different from what you have set if the source

DV/Digital8 format tape is in any of the following

conditions. In this case, see “Recording from

connected equipment without a timer” (page 57).

– There is a blank space in the recorded portion of

the tape.

For details about the recording mode, see

page 44.

5 Press OPTIONS on the remote to

select “DV Audio Input,” and press

ENTER. Then, select the setting for the

audio input.

“Stereo1” (default): Records original

sound only. Normally select this when

dubbing a DV format tape.

– The tape’s time code is not sequential.

– If the picture size or the recording mode on the

tape being dubbed changes.

“Mix”: Records both stereo 1 and 2.

“Stereo2”: Records additional audio

only.

Select “Mix” or “Stereo2” only if you

have added a second audio channel when

recording with your digital video camera.

You are ready to start dubbing. Select

one of the dubbing methods on the

following pages.

6 Adjust the dubbing picture quality and

size.

Before dubbing starts, press OPTIONS

to select “Rec. Settings,” and adjust the

recording settings (page 51).

z Hint

You can turn off the recorder during dubbing. The

recorder completes dubbing even after being turned

off.

Download from Www.Somanuals.com. All Manuals Search And Download.

b Notes

• When a blank space between the recordings on

the tape continues for more than five minutes,

One Touch Dubbing ends automatically.

• The recorder records a blank for five minutes

before it stops dubbing. To stop the blank

recording, press x REC STOP.

Recording an Entire DV

Format Tape (One Touch

Dubbing)

RWVR RWVideo

HDD

RVideo

RVR

You can record the entire contents of a DV/

Digital8 format tape onto a disc with a single

press of the ONE-TOUCH DUB button on

the recorder. The recorder controls the digital

video camera for the whole process, and

completes the recording.

How chapters are created

The contents dubbed to the HDD or DVD

become a single title. When “Auto Chapter”

is set to “On” in the “Recording” setup, this

title is divided into chapters. When dubbing

to the HDD or a DVD-RW/DVD-R (VR

mode), each shooting session on the tape

becomes a chapter on the disc. For other

discs, the recorder divides the title into

chapters at approximately 6 minute intervals.

Follow steps 1 to 6 of “Preparing for DV

dubbing” on page 82, and press ONE-

TOUCH DUB on the recorder.

The recorder rewinds the tape and then starts

recording the tape contents.

When the recording is finished, the recorder

rewinds the tape in the digital video camera.

To stop during recording

Press x REC STOP.

Note that it may take a few seconds for the

recorder to stop recording.

z Hints

• If you set “Finalise Disc” of “One Touch

Dubbing” to “Auto” in the “DVD” setup

(page 99), the recorded disc (except DVD-RW

(VR mode)) will automatically be finalised after

recording is finished.

• You can play back a previously recorded title on

the HDD while One Touch Dubbing is in

progress.

Download from Www.Somanuals.com. All Manuals Search And Download.

2 Select “DV EDIT,” and press ENTER.

The display asks if you want to start

selecting scenes.

Program Edit

RWVR RWVideo

HDD

RVR

RVideo

You can select scenes from a DV/Digital8

format tape, and then automatically record

selected scenes to the HDD or a DVD.

To use this function, do the following:

• If you have previously saved a

program, the display asks if you want to

edit an existing program or to create a

new program. To resume editing the

existing program, select “Saved Data,”

and go to step 9.

Connect your digital video camera and

prepare for recording

Select and edit the scenes you want to dub

Using the recorder’s remote control, fast

forward or rewind the tape to select the

scenes. At this point, the selected scenes are

not copied to the disc. The recorder only

remembers the IN and OUT points of the

scenes that you selected for dubbing. You can

also erase or change the order of the scenes.

3 Select “Start,” and press ENTER.

The display for setting the IN point (start

of the scene) appears.

The scene starts to play.

Dub the selected scenes

After you have selected the scenes, the

recorder will fast forward and rewind the tape

automatically and record the scenes to the

HDD or a DVD.

4 Select the IN point using m/M,

and press ENTER.

How chapters are created

The contents dubbed to the HDD or DVD

become a single title. When “Auto Chapter”

is set to “On” in the “Recording” setup, this

title is divided into chapters. When dubbing

to the HDD or a DVD-RW/DVD-R (VR

mode), each shooting session on the tape and

each selected scene becomes a chapter on the

disc. For other discs, the recorder divides the

title into chapters at approximately 6 minute

intervals.

Playback pauses.

5 Press ENTER if the IN point is correct.

If the IN point is incorrect, select the IN

point using c/C, and press ENTER.

The display for setting the OUT point

(end of the scene) appears.

6 Select the OUT point using m/M,

and press ENTER.

Playback pauses.

7 Press ENTER if the OUT point is

1 Follow steps 1 to 6 of “Preparing for

DV dubbing” on page 82, and press

SYSTEM MENU.

correct.

If the OUT point is incorrect, select the

OUT point using c/C, and press

ENTER.

The selected scene is added to the scene

information block.

• To add more scenes, go to step 4.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

To change the disc media, select “Media”

and press M/m. To change the dubbing

mode, select “Dub Mode” and press M/m.

8 When you finish adding scenes, press

The scene list is displayed.

Data capacity required for the dubbing.

This is displayed in red when the size

exceeds the available space on the

dubbing target media.

A Total duration of the scene

B Total number of scenes

C Scene information block

12 Select “Start,” and press ENTER.

The recorder starts recording the tape

contents as programmed.

9 Select the scene information block

you want to edit using </,, and

press ENTER.

To stop during recording

Press x REC STOP.

Note that it may take a few seconds for the

recorder to stop recording.

The sub-menu appears.

“Move”: Changes the scene order using

</, and ENTER.

“Erase”: Erases the scene. When asked

for confirmation, select “OK.”

“Preview”: Plays the selected scene.

• To add more scenes, press M and go to

step 4.

To automatically adjust the dubbing mode

If there is not enough available space on the

target disc, the recorder automatically selects

a dubbing mode with lower picture quality

according to the available space. The same

dubbing mode is set for all of the titles. If disc

space is insufficient for the selected dubbing

mode, the following display appears after

step 12.

10 When you finish editing the scene list,

select “OK,” and press ENTER.

The display for entering the title name

appears. To enter a new name, select

“Enter,” and follow the explanations on

page 31.

Select “OK” and go to step 12.

If you do not want to change the dubbing

mode, select “Cancel.” However, note that

dubbing will end before the title is finished.

11 Select “OK,” and press ENTER.

The title name is fixed, and the display

asks if you want to start recording.

b Notes

• If you set the beginning of the tape as the IN point

and the end point as the OUT point, the IN and

OUT points may move slightly during dubbing.

• You cannot set a scene to be shorter than one

second.

Download from Www.Somanuals.com. All Manuals Search And Download.

Select “Present Time,” and press

ENTER.

Settings and Adjustments

Clock and Language

Settings (Basic)

The “Basic” setup helps you to make clock

and language settings for the recorder.

Press M/m to set the day, and press ,.

Set the month, year, hour, and minutes in

sequence. Press </, to select the item

to be set, then press M/m to set the

numbers. The day of the week is set

automatically.

1 Press SYSTEM MENU while the

recorder is in stop mode.

2 Select “SETUP,” and press ENTER.

3 Select “Basic,” and press ENTER.

The options for “Basic” appear. The

default settings are underlined.

To turn off the display, press SYSTEM

MENU repeatedly.

To change the numbers, press < to

return to the item to be changed, and

press M/m.

Press ENTER to start the clock.

Language

DVD Menu (DVD VIDEO only)

Switches the language for the DVD menu.

Audio

Switches the language of the sound track.

When you select “Original,” the language

given priority in the disc or broadcasted by a

digital channel is selected.

Clock

Normally the clock is set automatically using

the time and date information broadcasted by

the local network package.

If the recorder does not receive a time signal

from any service, you may set the clock

manually. Therefore, please proceed as

follows.

Subtitle

Switches the language of the subtitles

recorded on the disc or broadcasted by a

digital channel (when available).

When you select “Audio Follow,” the subtitle

language changes according to the language

you selected for the sound track.

To set the clock manually

z Hint

If you select “Others” in “DVD Menu,” “Subtitle,”

or “Audio,” select and enter a language code from

“Language Code List” on page 115 using the

number buttons.

Select “Clock” in “Basic,” and press

ENTER.

b Note

If you select a language in “DVD Menu,”

“Subtitle,” or “Audio” that is not recorded on the

DVD VIDEO, one of the recorded languages will

be automatically selected.

Download from Www.Somanuals.com. All Manuals Search And Download.

Parental Lock

Digital TV settings

(DTV Settings)

The “Parental Lock” display enables you to

lock certain channels you consider unsuitable

and to set an age limit so that any programme

classed above that age by the broadcaster is

restricted.

The “DTV Settings” setup enables you to

take full advantage of Digital TV

Broadcasting services such as favourites

channels setting or to prevent children’s

viewing unsuitable channels and

programmes.

Select “Parental Lock” in “DTV

Settings,” and press ENTER.

• When you have already registered a

password, the display for entering the

password appears.

1 Press SYSTEM MENU while the

recorder is in stop mode.

• If you have not yet registered a

password, the display for registering a

new password appears.

2 Select “SETUP,” and press ENTER.

3 Select “DTV Settings,” and press

ENTER.

The “DTV Settings” setup appears with

the following options.

Enter your four-digit password using M/

m or the number buttons, then select

“OK” and press ENTER.

Favourites

b Note

If you forget your password, you will have to reset

it by selecting “Password” of the “Factory Setup” in

the “Others” setup (page 101).

The “Favourites” display allows you to store

and organize your favourite channels into one

of four TV or four Radio lists.

For details, see page 41.

Download from Www.Somanuals.com. All Manuals Search And Download.

z Hints

To lock channels

• Press the blue button to view the list showing only

the locked channels.

• Press the blue button once again when you wish

to return to the previous channel list display.

Once the “Parental Lock” menu is

displayed, select “Lock Programmes,”

and press ENTER.

All available TV channels are displayed.

• Press

while the “Lock Programmes”

display is turned on to change to the previous/next

page.

b Note

If you select a channel which Parental Lock is

activated, appears on the gray screen and it is

recorded.

To set the Age Limit

Press TV/RADIO to display either the

TV or Radio channels.

The Radio mode is indicated by the

Once the “Parental Lock” menu is

displayed, select “Set Age Limit,” and

press ENTER.

presence of a Radio icon

display.

in the

Select a channel you want to lock using

M/m or the number buttons, and press

ENTER.

A locked channel is identified by the

icon next to the programme number.

Press M/m to set the desired age limit and

press ENTER.

b Notes

• To operate correctly, this feature relies on the

broadcaster sending the correct age classification

for each programme.

• If you select a channel blocked by Parental Lock,

only a grey screen displaying will be recorded.

Press the green or red button to view the

previous or next page.

Press O RETURN to come back to the

“Parental Lock” menu.

To unlock channels

In step 3 above, select the channel you

want to unlock using M/m, and press

ENTER.

The icon next to the programme

number disappears.

Press O RETURN to come back to the

“Parental Lock” menu.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

Programme Hide

This option allows you to hide (disable)

unused or unwanted channels.

Tuning

The “Tuning” display allows you to tune your

recorder automatically or to hide unused or

unwanted programmes and also change the

order of the programmes on display.

The hidden programmes will be skipped

when you press PROG +/– and will not

appear in the EPG applications.

Once the “Tuning” menu is displayed,

select “Programme Hide,” and press

ENTER.

Select “Tuning” in “DTV Settings,” and

press ENTER.

The “Programme Hide” display appears

showing all the TV or Radio channels

available to you.

Auto Tune

This option enables you to capture and store

automatically all available channels.

Once the “Tuning” menu is displayed,

select “Auto Tune,” and press ENTER.

Press TV/RADIO to display either the

TV or Radio channels.

The Radio mode is indicated by the

presence of a Radio icon

display.

in the

Select “Yes,” and press ENTER.

The “Auto Tune” display appears

showing a tuning progress bar and the

number of channels found.

Select a channel you want to hide using

M/m or the number buttons, then press

ENTER.

When “Auto Tune” has ended, a

completion display appears indicating

the number of TV and Radio channels

that have been found and stored.

Press the green or red button to view the

previous or next page.

Once you have hidden the unwanted

channels as desired, press O RETURN

repeatedly to return to the main menu.

Press ENTER to remove the display and

view the first channel captured.

Download from Www.Somanuals.com. All Manuals Search And Download.

Restoration of hidden programmes

Hidden channels are identified by an icon

next to the programme number.

In step 3 above press M/m to select the

channel you want to restore, then press

ENTER.

Press M/m to select the programme

number you want your selected channel

to appear on.

The icon next to the programme number

disappears.

z Hints

• Press the blue button to view the list showing only

the hidden channels.

• Press the blue button once again when you want

to return to the standard programme hide display.

Press the blue button to swap channel

position.

Your selected channel appears on the

programme number selected in step 3.

Programme Sort

This option allows you to change the channel

order in the on-screen programme list.

Repeat this procedure to move other

channels.

Once the “Tuning” menu is displayed,

select “Programme Sort,” and press

ENTER.

Once you have moved all channels as

desired, press O RETURN repeatedly

to return to the main menu.

The “Programme Sort” display appears

showing the list of all tuned channels.

Technical Information

Select “Technical Information” in “DTV

Settings,” and press ENTER.

Select the channel you want to move

using M/m or the number buttons, then

press ENTER.

A tick icon appears next to the selected

programme number and a Swap option

appears in the display.

Manufacturer Information

This information screen shows you the

current version of software installed in your

recorder.

Once the “Technical Information” menu

is displayed, select “Manufacturer

Information,” and press ENTER.

After viewing the information displayed,

press O RETURN to come back to the

“Technical Information” menu.

Press the green or red button to view the

previous or next page.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

Signal Strength

This information screen shows the signal

strength of the broadcast you are watching.

Video Settings (Video)

Select “Signal Strength” in the

“Technical Information” and press

ENTER.

The “Signal Strength” display appears

with the selected channel on view in the

background.

Video settings will adjust items related to the

image, such as size and colour.

Choose the settings according to the type of

TV or tuner connected to the DVD recorder.

1 Press SYSTEM MENU while the

recorder is in stop mode.

2 Select “SETUP,” and press ENTER.

The “Signal Strength” display coloured

bars correspondences are as follows:

3 Select “Video,” and press ENTER.

The “Video” setup appears with the

following options. The default settings

are underlined.

Press PROG +/– to check the signal

strength of the other tuned channels.

After viewing the information displayed,

press O RETURN to come back to the

Technical Information menu.

Digital Software Upgrade

Periodically Sony will issue upgrades for the

software that was initially installed in your

recorder. These upgrades will automatically

be received and enabled. If desired, you can

disable this option as follows:

Video Output

TV Type

Select “Digital Software Upgrade” in the

“Technical Information” and press

ENTER.

Sets the picture size when playing back a title

recorded from 16:9 size video (page 51) or a

16:9 size commercial DVD video.

Select the playback picture size according to

the type of connected TV (wide-screen/wide

mode TV or conventional 4:3 screen TV).

The “Digital Software Upgrade” menu

option appears.

16 : 9

Select this when connecting

to a wide-screen TV or TV

with a wide mode function.

Press M/m to select “Off,” and press

4:3 Letter

Box

Select this when connecting

to a 4:3 screen TV. Displays a

wide picture with bands on

the upper and lower portions

of the screen.

ENTER.

b Notes

• Sony recommend that you always leave this

option set to “On.”

4:3 Pan

Scan

Select this when connecting

to a 4:3 screen TV.

Automatically displays a

wide picture on the entire

screen and cuts off the

portions that do not fit.

• To receive the upgrade, the unit must be powered

on. It will take up to 30 minutes to upgrade the

unit. The new software will be available once the

unit has been placed into standby, and then back

to normal operating mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Progressive Mode

16 : 9

DVD software can be divided into two types:

film based software and video based

software. Video based software is derived

from TV and displays images at 25 frames/50

fields (30 frames/60 fields) per second. Film

based software is derived from film and

displays images at 24 frames per second.

Some DVD software contains both Video

and Film.

In order for these images to appear natural on

your screen when output in progressive mode

(50 or 60 frames per second), the progressive

video signal needs to be converted to match

the type of DVD software that you are

watching.

4:3 Letter Box

4:3 Pan Scan

b Note

Depending on the disc, “4:3 Letter Box” may be

selected automatically instead of “4:3 Pan Scan” or

vice versa.

You can fine-tune the progressive 525p/625p

video signal that is output when you set

“Progressive Output” to “On.”

Note that you must connect to a progressive

format TV using the COMPONENT VIDEO

OUT jacks (page 13).

Component Out

Selects whether or not to output video signals

from the COMPONENT VIDEO OUT jacks.

Auto

Automatically detects the

Outputs the component video

signals. Select this when you

want to view progressive

signals.

software type (Film-based or

Video-based) and selects the

appropriateconversionmode.

Normally select this position.

Off

Outputs no signals.

Video

Fixes the conversion mode to

the mode for Video-based

software.

b Notes

• When you set “Line1 Output” to “RGB,” you

cannot set “Component Out” to “On.”

b Note

• When you connect the recorder to a monitor or

projector via only the COMPONENT VIDEO

OUT jacks, do not select “Off.” If you select

“Off” in this case, the picture may not appear.

When picture noise appears after you set the

recorder to progressive format, hold down x, and

press PROGRAM – (minus) on the unit.

Progressive Output

Scart Setting

If your TV accepts progressive (525p/625p)

format signals, set “Progressive Output” to

“On.” You will enjoy accurate colour

reproduction and high quality images.

Sets the method of inputting/outputting

signals from the SCART jacks on the rear

panel of the recorder. Select an option for

each of the items below according to the

combination of jacks and methods that you

are going to use.

Select “Progressive Output,” and press

ENTER.

Line1 Output

Selects a method of outputting video signals

for the LINE 1 – TV jack.

Select “On,” and press ENTER.

The display asks for confirmation.

Select “Start,” and press ENTER.

The video switches to a progressive

signal for 5 seconds.

RGB

Outputs RGB signals.

Outputs video signals.

Outputs S-video signals.

Video

S Video

If video signal appears OK, select “Yes,”

and press ENTER.

If picture is distorted, select “No,” and

press ENTER.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

b Notes

Auto Display

• If your TV does not accept S-video or RGB

signals, no picture appears on the TV screen even

if you select “S Video” or “RGB.” See the

instructions supplied with your TV.

• You cannot select “RGB” when “Component

Out” above is set to “On.”

Automatically displays

information on the screen

when the recorder is turned

on, etc.

• SMARTLINK is available only when “Video” is

selected.

Off

Displays information only

when DISPLAY is pressed.

Line3 Input

Selects a method of inputting video signals

for the LINE 3 jack. The picture will not be

clear if this setting does not match the type of

video input signal.

Screen Saver

The screen saver image appears when you do

not use the recorder for more than 10 minutes

while an on-screen display, such as the

System Menu, is displayed on your TV

screen. The screen saver image helps prevent

your display device from becoming damaged

(ghosting).

Video/

RGB

Inputs video signals or RGB

signals.

S Video

Inputs S-video signals.

Turns on the screen saver

function.

b Note

Input signals are recorded in video mode when

“Video/RGB” is selected.

Off

Turns off the function.

Line3 Output

Selects a method of outputting video signals

for the LINE 3 jack.

Video

Outputs video signals.

Outputs S-video signals.

S Video

Pause Mode (HDD/DVDs only)

Selects the picture quality in pause mode.

Auto

The picture, including

subjects that move

dynamically, is output with

no jitter. Normally select this

position.

Frame

The picture, including

subjects that do not move

dynamically, is output in high

resolution.

Colour System

Selects the colour system when playing

VIDEO CDs (including Super VIDEO CDs).

PAL

Plays a disc in PAL colour

system.

NTSC

Plays a disc in NTSC colour

system.

Download from Www.Somanuals.com. All Manuals Search And Download.

Audio Connection

The following setup items switch the method

of outputting audio signals when you connect

a component such as an amplifier (receiver)

with a digital input jack.

For connection details, see “Step 3:

Connecting the Audio Cords” on page 15.

Select “Dolby Digital,” “MPEG,” “DTS,”

and “48kHz/96kHz PCM” after setting

“Digital Out” to “On.”

Audio Settings (Audio)

The “Audio” setup allows you to adjust the

sound according to the playback and

connection conditions.

1 Press SYSTEM MENU while the

recorder is in stop mode.

If you connect a component that does not

accept the selected audio signal, a loud noise

(or no sound) will come out from the

speakers, and may affect your ears or cause

speaker damage.

2 Select “SETUP,” and press ENTER.

3 Select “Audio,” and press ENTER.

The “Audio” setup appears with the

following options. The default settings

are underlined.

Select “Audio Connection” in “Audio,”

and press ENTER.

Select “Digital Out,” and press ENTER.

Audio ATT (attenuation)

If the playback sound is distorted, set this

item to “On.” The recorder reduces the audio

output level.

This function affects the output of the

following jacks:

Normally select this

position.

Off

The influence of the

digital circuit upon the

analogue circuit is

minimal.

– LINE 2 OUT R-AUDIO-L jacks

– LINE 1 – TV jack

– LINE 3 jack

Select “On,” and press ENTER.

Set the digital output signal.

Select this when the playback

sound from the speakers is

distorted.

• Dolby Digital (HDD/DVDs only)

Selects the type of Dolby Digital signal.

Off

Normally select this position.

D-PCM

Select this when the recorder

is connected to an audio

component lacking a built-in

Dolby Digital decoder. The

surround effects of output

signals are determined by the

“Downmix” setting item in

the “Audio” setup.

Dolby

Digital

Select this when the recorder

is connected to an audio

component with a built-in

Dolby Digital decoder.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

• MPEG (DVD VIDEOs only)

Selects the type of MPEG audio signal.

Audio DRC (Dynamic Range Control)

(DVDs only)

Selects the dynamic range (difference

between soft and loud sounds) setting when

playing a DVD that conforms to Audio DRC.

This affects the output from the following

jacks:

– LINE 2 OUT R-AUDIO-L jacks

– LINE 1 – TV jack

– LINE 3 jack

PCM

Select this when the recorder

is connected to an audio

component without a built-in

MPEG decoder. If you play

MPEG audio sound tracks,

the recorder outputs stereo

signals via the DIGITAL

OUT (COAXIAL) jack.

– DIGITAL OUT (COAXIAL) jack only

when “Dolby Digital” is set to “D-PCM”

(page 95).

MPEG

Select this when the recorder

is connected to an audio

component with a built-in

MPEG decoder.

Standard

TV Mode

Normally select this position.

• DTS (DVD VIDEOs only)

Selects whether or not to output DTS signals.

Makes low sounds clear even

if you turn the volume down.

Select this when the recorder

is connected to an audio

component with a built-in

DTS decoder.

Wide

Range

Gives you the feeling of

being at a live performance.

Downmix (DVDs only)

Switches the method for mixing down to two

channels when you play a DVD which has

rear sound elements (channels) or is recorded

in Dolby Digital format. For details on the

rear signal components, see “4. Displaying

the Playing/Remaining Time and Play

Information” on page 28. This function

affects the output of the following jacks:

– LINE 2 OUT R-AUDIO-L jacks

– LINE 1 – TV jack

Off

Select this when the recorder

is connected to an audio

component without a built-in

DTS decoder.

• 48kHz/96kHz PCM (DVD VIDEOs only)

Selects the sampling frequency of the audio

signal.

48kHz/

16bit

The audio signals of DVD

VIDEOs are converted to

48 kHz/16 bit and output.

– LINE 3 jack

– DIGITAL OUT (COAXIAL) jack when

“Dolby Digital” is set to “D-PCM”

(page 95).

96kHz/

24bit

All signals containing

96 kHz/24 bit are output

without conversion.

However, the signals are

output at 48 kHz/16 bit if

are contained.

Dolby

Surround

Normally select this position.

Multi-channel audio signals

are output to two channels for

enjoying surround sounds.

Normal

Multi-channel audio signals

are downmixed to two

channels for use with your

stereo.

b Note

“48kHz/96kHz PCM” setting has no effect when

audio signals are output from the LINE 2 OUT (R-

AUDIO-L) jacks or LINE 1 – TV/LINE 3 jack. If

the sampling frequency is 96kHz, signals are

simply converted to analogue signals and output.

Download from Www.Somanuals.com. All Manuals Search And Download.

HQ Setting

Selects the HQ mode used for recording on

the HDD (page 44).

Recording Settings

(Recording)

HQ+

Records in higher quality

(approximate 15 Mbps).

The “Recording” setup allows you to adjust

recording settings.

Records in the standard HQ

mode.

1 Press SYSTEM MENU while the

recorder is in stop mode.

DVD Rec. Settings

Bilingual Recording (for all recordable

discs except DVD-RWs/DVD-Rs in VR mode)

Selects the sound to be recorded on the

recordable disc when recording from

externally input audio signals, such as audio

signals from connected equipment. This

setting is not necessary when recording on

DVD-RWs/DVD-Rs (VR mode) that record

both the main and sub sounds.

2 Select “SETUP,” and press ENTER.

3 Select “Recording,” and press

ENTER.

The “Recording” setup appears with the

following options. The default settings

are underlined.

Main

Records the main sound for

the bilingual programme.

Sub

Records the sub sound for the

bilingual programme.

Timer Settings

Guide Timer Extend

Sets the time to extend timer recording

length.

Off (default) t 1Min. t 2Min. t 5Min.

t 10Min.

HDD Rec. Settings

Bilingual Recording

Selects the sound to be recorded on the HDD

when recording from externally input audio

signals, such as audio signals from connected

equipment.

Rec. Mode Adjust

Automatically adjusts the

recording mode to enable the

entire programme to be

recorded (page 46).

Main

Records the main sound for

the bilingual programme.

Sub

Records the sub sound for the

bilingual programme.

Off

Turns off the function.

Auto Title Erase (HDD only)

Main+Sub Records the main and sub

sounds for the bilingual

programme.

Automatically erases old

titles recorded on the HDD

(page 46).

b Note

If you change the recording mode while dubbing

from a DVD to the HDD, the sound recorded in the

source (DVD) is applied regardless of this setting.

Off

Turns off the function.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

TV Direct Rec. (HDD/DVD+RW/DVD-RW/

DVD+R/DVD-R only)

Disc Settings (DVD)

Allows you to easily record

what you are watching on the

TV using SMARTLINK.

The“DVD”setupallowsyoutoadjustparental

control and other DVD related settings.

Off

Turns off the TV Direct Rec

function.

1 Press SYSTEM MENU while the

recorder is in stop mode.

2 Select “SETUP,” and press ENTER.

Synchro Rec.

Selects the recording destination used for

Synchro-Recording (page 55).

3 Select “DVD,” and press ENTER.

The “DVD” setup appears with the

following options. The default settings

are underlined.

Recordto

HDD

Records to the HDD.

Recordto

DVD

Records to DVDs.

Auto Chapter

Selects whether to automatically divide a

recording (a title) into chapters during

recording or dubbing.

Inserts chapter marks at

approximately 6 minute

intervals.

Parental Control (DVD VIDEO only)

Playback of some DVD VIDEOs can be

limited according to a predetermined level,

such as the age of the users. Scenes may be

blocked or replaced with different scenes.

Off

No chapter mark is inserted.

b Notes

Select “Parental Control” in “DVD,” and

press ENTER.

• The actual chapter mark interval may vary

depending on the amount of information

contained in the video to be recorded.

• If you have not entered a password, the

display for registering a new password

appears.

• Chapter marks are automatically inserted where

the recordings start on the tape when “Auto

Chapter” is set to “On” during DV dubbing to the

HDD or a DVD-RW/DVD-R (VR mode).

• When you have already registered a

password, the display for entering the

password appears.

Download from Www.Somanuals.com. All Manuals Search And Download.

b Notes

Enter your four-digit password using the

number buttons, then select “OK” and

press ENTER.

• If you forget your password, you will have to

reset it by selecting “Password” of “Factory

Setup” in the “Others” setup (page 101).

• When you play discs which do not have the

Parental Control function, playback cannot be

limited on this recorder.

• Depending on the disc, you may be asked to

change the Parental Control level while playing

the disc. In this case, enter your password, then

change the level.

Format DVD-RW (DVD-RW only)

The recorder automatically starts formatting

in VR mode or Video mode, whichever is

selected below, when a new, unformatted

DVD-RW is inserted.

Select “Standard,” and press ENTER.

The selection items for “Standard” are

displayed.

Automatically formats the

disc in VR mode.

Video

Automatically formats the

disc in Video mode.

Select a geographic area as the playback

limitation level, and press ENTER.

The area is selected.

• When you select “Others,” press the

number buttons to select and enter an

area code in the table (page 115). Then

select “OK” and press ENTER.

One Touch Dubbing

Displays the following options for the One

Touch Dub function.

Finalise Disc (for all recordable discs

except DVD-RW in VR mode)

Selects whether or not to finalise the disc

automatically following One Touch Dubbing

(page 84).

Select “Level,” and press ENTER.

The selection items for “Level” are

displayed.

Auto

Automatically finalises the

disc following One Touch

Dubbing.

Manual

Allows you to finalise the

disc manually.

The lower the value, the stricter the

limitation.

Discs rated higher than the selected level

will be restricted.

Select the level, and press ENTER.

The Parental Control setting is complete.

To cancel the Parental Control setting for

the disc, set “Level” to “Off” in step 6.

To change the password, reset

“Password” in the “Others” setup

(page 100).

Download from Www.Somanuals.com. All Manuals Search And Download.

Password

You can set or modify the password that

gives access to the “Parental Control” and

“Parental Lock” settings.

Remote Control Settings/

Factory Settings (Others)

Select “Password” in “Others,” and press

ENTER.

The “Others” setup allows you to set up other

operational settings.

• If you have not yet set a password, the

display for registering a new password

appears.

1 Press SYSTEM MENU while the

recorder is in stop mode.

2 Select “SETUP,” and press ENTER.

3 Select “Others,” and press ENTER.

The “Others” setup appears with the

following options. The default settings

are underlined.

• When you have already registered a

password, the display for entering the

password appears.

Dimmer

If you wish to change your password,

first enter your current password using

the number buttons, then select “OK”

and press ENTER.

Adjusts the lighting of the front panel display.

Normal

Bright lighting.

The display for registering a new

password appears.

Save

Power

Low lighting. Turns off the

lighting when the power is

off.

Enter your new four-digit password

using the number buttons, then select

“OK” and press ENTER.

Command Mode

Changes the Command Mode of the recorder

if other DVD equipment is assigned the same

Command Mode. For details, see “If you

have a Sony DVD player or more than one

Sony DVD recorder” on page 18.

b Note

If you forget your password, you will have to reset

it by selecting “Password” of “Factory Setup” in the

“Others” setup (page 101).

100

Download from Www.Somanuals.com. All Manuals Search And Download.

Factory Setup

Allows you to select the setup settings by

group, and return them to their default

settings. Note that all of your previous

settings will be lost.

Easy Setup

(Resetting the Recorder)

Select this to run the “Easy Setup”

programme.

Select “Factory Setup” in “Others,” and

press , or ENTER.

The display for selecting a group of

settings appears.

1 Press SYSTEM MENU while the

recorder is in stop mode.

Select the group of settings you want to

return to default from “Basic,” “DTV

Settings,” “Video,” “Audio,”

“Recording,” “DVD,” “Others,”

“Password,” and “All,” and press , or

ENTER.

2 Select “SETUP,” and press ENTER.

3 Select “Easy Setup,” and press

ENTER.

Select “Start,” and press ENTER.

The selected settings return to their

default settings.

Press ENTER when “Finish” appears.

Format

You can erase all titles recorded on the HDD.

4 Select “Start.”

5 Follow the instructions for “Easy

Setup” (page 20) from step 2.

101

Download from Www.Somanuals.com. All Manuals Search And Download.

Picture noise appears.

, If the picture output signal from your

recorder passes through your VCR to get to

your TV, or if you are connected to a

combination TV/VIDEO player, the copy-

protection signal applied to some DVD

programmes could affect picture quality. If

you still experience this problem even when

you connect your recorder directly to your

TV, try connecting your recorder to your

TV’s S VIDEO input.

, You have set the recorder to progressive

format even though your TV cannot accept

the progressive signal. In this case, hold

down x, and press PROGRAM – (minus)

on the unit.

Additional Information

Troubleshooting

If you experience any of the following

difficulties while using the recorder, use this

troubleshooting guide to help remedy the

problem before requesting repairs. Should

any problem persist, consult your nearest

Sony dealer.

Power

, Even if your TV is compatible with

progressive format (525p/625p) signals, the

image may be affected when you set the

recorder to progressive format. In this case,

hold down x, and press PROGRAM –

(minus) on the unit and the recorder is set to

normal (interlace) format.

The power does not turn on.

, Check that the mains lead is connected

securely.

Tuner

, You are playing a DVD recorded in a colour

system that is different from your TV.

, Noise may appear in the pictures recorded

on the HDD, which is due to the

characteristics of HDD, and is not a

malfunction.

, When playing a double-layer DVD, the

video and audio may be momentarily

interrupted at the point where the layers

switch.

The channel is not found or stored or

missed.

, Make sure that your aerial is properly

connected to the recorder.

, Confirm with your dealer that you are in an

area that can receive a digital signal.

, Check your aerial installation.

Picture

There is no picture.

There is no picture or the picture noise

appears when connected to the DV IN

jack.

, Re-connect all connecting cords securely.

, The connecting cords are damaged.

, Check the connection to your TV (page 12).

, Switch the input selector on your TV (such

as to “VCR”) so that the signal from the

recorder appears on the TV screen.

, Try the following:

1Turn the recorder off and on again.

2Turn the connected equipment off and on

again. 3Disconnect and then connect the

i.LINK cable again.

, Check that “Scart Setting” in the “Video”

setup is set to the appropriate item that

conforms to your system (page 93).

TV programme reception does not fill the

screen.

, Select the correct source using the INPUT

SELECT button, or select a channel of any

TV programme using the PROG +/–

buttons.

, If you connect the recorder to your TV via

only theCOMPONENTVIDEO OUTjacks,

set “Component Out” of “Video Output” in

the “Video” setup to “On” (page 93).

, This recorder cannot record NTSC signals.

, A scrambled channel is selected.

, When playing a double-layer DVD, the

video and audio may be momentarily

interrupted at the point where the layers

switch.

102

Download from Www.Somanuals.com. All Manuals Search And Download.

The picture is breaking up.

, The signal strength is low.

, Check aerial installation.

The picture does not fill the screen.

, Set “TV Type” of the “Video Output” in the

“Video” setup in accordance with the

screen size of your TV (page 92).

TV programme pictures are distorted.

, Reorient the TV aerial.

, Adjust the picture (see the TV’s instruction

The picture does not fill the screen, even

though the picture size is set in “TV Type”

of the “Video Output” in the “Video”

setup.

manual).

, Place the recorder and TV farther apart.

, Place the TV and any bunched aerial cables

farther apart.

, The picture size of the title is fixed.

, The aerial cable is connected to the

AERIAL OUT jack on the recorder.

Connect the cable to the AERIAL IN jack.

The picture is black and white.

, Check that “Line1 Output” of the “Scart

Setting” in the “Video” setup is set to the

appropriate item that conforms to your

system (page 93).

TV channels cannot be changed.

, A timer recording started, which changed

the channels.

, The channel is hidden (page 90).

, The Parental Lock is activated (page 88).

, If you are using a SCART cord, be sure to

use one that is fully wired (21 pins).

Sound

The picture from equipment connected to

the recorder’s input jack does not appear

on the screen.

There is no sound.

, Re-connect all connections securely.

, The connecting cord is damaged.

, The input source setting on the amplifier or

the connection to the amplifier is incorrect.

, The recorder is in reverse play, fast-

forward, slow motion, or pause mode.

, If the audio signal does not come through

the DIGITAL OUT (COAXIAL) jack,

check the “Audio Connection” settings in

the “Audio” setup (page 95).

, If the equipment is connected to the LINE 1

– TV jack, select “L1” in the front panel

display by pressing INPUT SELECT.

If the equipment is connected to the LINE 2

IN jacks, select “L2” in the front panel

display by pressing INPUT SELECT.

If the equipment is connected to the LINE 3

jack, select “L3” in the front panel display

by pressing INPUT SELECT.

If the equipment is connected to the DV IN

jack, (this is usually for a digital video

camera connection), select “DV” in the

front panel display by pressing INPUT

SELECT.

Sound distortion occurs.

, Set “Audio ATT” in the “Audio” setup to

“On” (page 95).

Sound is noisy.

The playback picture or TV programme

from the equipment connected through the

recorder is distorted.

, If the playback picture output from a DVD

player, VCR, or tuner goes through your

recorder before reaching your TV, the copy-

protection signal applied to some

, When playing a CD with DTS sound tracks,

noise will come from the LINE 2 OUT R-

AUDIO-L jacks, LINE 1 – TV jack, or

LINE 3 jack (page 61).

The sound volume is low.

, The sound volume is low on some DVDs.

The sound volume may improve if you set

“Audio DRC” in the “Audio” setup to “TV

Mode” (page 96).

programmes could affect picture quality.

Disconnect the playback equipment in

question and connect it directly to your TV.

, Set “Audio ATT” in the “Audio” setup to

“Off” (page 95).

,continued

103

Download from Www.Somanuals.com. All Manuals Search And Download.

An alternate audio track cannot be

recorded or played.

The recorder does not start playback from

the beginning.

, Resume play was activated (page 59).

, You have inserted a DVD whose Title menu

or DVD menu automatically appears on the

TV screen when it is first inserted. Use the

menu to start playback.

, When recording from connected

equipment, set “Line Audio Input” in

OPTIONS menu to “Bilingual” (page 57).

, Multilingual tracks (main and sub) cannot

be recorded on DVD+RWs, DVD-RWs

(Video mode), DVD+Rs, or DVD-Rs

(Video mode). To record the language, set

“Bilingual Recording” of the “DVD Rec.

Settings” in the “Recording” setup to

“Main” or “Sub” before recording

(page 97). To record both the main and sub

sounds, record on DVD-RWs/DVD-Rs

(VR mode).

, Any discs other than the HDD or DVD-

RWs/DVD-Rs (VR mode) cannot be used

for recording both main and sub sounds. To

record on the HDD, set “Bilingual

Recording” of the “HDD Rec. Settings” in

the “Recording” setup to “Main+Sub”

(page 97).

The recorder starts playing automatically.

, The DVD VIDEO features an auto

playback function.

Playback stops automatically.

, If the DVD has an auto pause signal, the

recorder stops playback at the auto pause

signal.

Some functions such as Stop, Search, or

Slow-motion Play cannot be performed.

, Depending on the DVD, you may not be

able to do some of the operations above. See

the instruction manual supplied with the

disc.

, If you have connected an AV amplifier to

the DIGITAL OUT (COAXIAL) jack and

want to change the audio track for HDD/

DVD-RWs/DVD-Rs (VR mode) during

playback, set “Dolby Digital” of the “Audio

Connection” in the “Audio” setup to “D-

PCM” (page 95).

The language for the sound track cannot

be changed.

, Multilingual tracks are not recorded on the

DVD being played.

, The DVD VIDEO prohibits the changing of

the language for the sound track.

, Try changing the language using the DVD

VIDEO’s menu.

The sound is breaking up.

, The signal strength is low.

, Check aerial installation.

The subtitle language cannot be changed

or turned off.

Playback

, Multilingual subtitles are not recorded on

the DVD VIDEO.

, The DVD VIDEO prohibits changing of the

subtitles.

, Try changing the subtitle using the DVD

VIDEO’s menu.

, The subtitles cannot be changed for the

titles recorded on this recorder.

The recorder does not play any type of disc

(except HDD).

, The disc is upside down. Insert the disc with

the labelled side facing up.

, The disc is not correctly inserted.

, Moisture has condensed inside the recorder.

In this case, if the recorder is on, leave it on

(if it is off, leave it off) for about an hour

until the moisture evaporates.

, If the disc was recorded on another recorder

and was not finalised (page 33), the

recorder cannot play the disc.

104

Download from Www.Somanuals.com. All Manuals Search And Download.

, Disconnect the mains lead from the mains,

and connect it again.

, The programme contains copy protection

signals that restrict copying.

, Other timer setting overlapped the timer

setting (page 54).

, There is no DVD inside the recorder.

, There is not enough disc space for the

recording.

, The recorder was in the process of dubbing

(HDDyDVD).

, The recorder was in the process of DV

Dubbing.

, A scrambled channel is selected.

, The Channel activated Parental Lock is

selected (page 88).

The angles cannot be changed.

, Multi-angles are not recorded on the DVD

VIDEO being played.

, You are trying to change the angles when

“

” does not appear in the front panel

display (page 58).

, The DVD VIDEO prohibits changing

angles.

, Try changing the angle using the DVD

VIDEO’s menu.

, The angles cannot be changed for the titles

recorded on this recorder.

, The angles cannot be changed during slow

motion playback or when playback is

paused.

The MP3 audio tracks do not play.

, The MP3 audio tracks are not recorded in a

format that the recorder can play (page 65).

Recording does not stop immediately

after you press x REC STOP.

, It will take a few seconds for the recorder to

input disc data before recording can stop.

The JPEG image files do not play.

, The JPEG image files are not recorded in a

format that the recorder can play (page 65).

, Progressive JPEG images cannot be played.

Recording does not stop after you press

, Press x REC STOP.

TV Pause does not work.

, You are recording to the HDD or the HDD

is full.

Timer recording is not complete or did not

start from the beginning.

, There was a power failure during recording.

If the power recovers when there is a timer

recording, the recorder resumes recording.

Should the power failure continue for more

than 1 hour, reset the clock (page 87).

, Other timer setting overlapped the timer

setting (page 54).

Recording/Timer recording/

Editing

The programme position cannot be

changed from the programme position you

are recording.

, Disc space was not enough.

, Set the TV’s input source to “TV.”

Contents previously recorded were

erased.

, Data that is not playable on this recorder but

was recorded on a DVD with a PC will be

erased from the disc when the disc is

inserted.

, “Auto Title Erase” of the “Timer Settings”

in the “Recording” setup is set to “On”

(page 97).

Recording does not start immediately

after you press z REC.

, Operate the recorder only after “LOAD,”

“FORMAT,” or “INFOWRITE” disappears

from the front panel display.

Nothing was recorded even though you set

the timer setting correctly.

, There was a power failure during recording.

, The recorder’s internal clock stopped due to

a power failure that lasted for more than 1

hour. Reset the clock (page 87).

,continued

105

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording from the equipment

with a timer

Display

The clock has stopped.

, Set the clock again (page 87).

, The clock stopped due to a power failure

that lasted for more than 1 hour. Reset the

clock (page 87).

Nothing was recorded even though you set

the Synchro-Rec setting correctly.

, You forgot to turn off the connected

equipment. Turn off the connected

equipment and set the recorder to Synchro-

Rec standby mode (page 55).

The clock is wrong.

, Set the clock again (page 87). If you cannot

set the clock, wait until the clock data is

received and the clock is automatically

adjusted.

, The recorder was not set to the Synchro-

Recording standby mode. Press

c z SYNCHRO REC to have the recorder

stand by for recording. Make sure the

SYNCHRO REC indicator lights up on the

front panel (page 55).

The TIMER REC indicator is flashing.

, The disc does not have enough space.

, Insert a recordable disc inside the recorder.

, The inserted DVD is protected (page 33).

, The equipment is not connected to the LINE

3 jack of the recorder.

, The recorder is connected to the TV output

jack of the connected equipment.

The recording mode indication is

incorrect.

Synchro-Recording does not complete.

, The timer setting for the connected

equipment overlapped the recorder’s timer

setting (page 56).

, There was a power failure during the

recording.

, When the recording or dubbing is less than

ten minutes, or if a picture with little

movement is displayed for more than ten

minutes, the recording mode indication may

be displayed incorrectly. Note that the

actual recording or dubbing itself was

correctly made in the selected recording

mode.

, After playing titles recorded in EP and SLP

mode, the recording mode indication may

change depending on the recorded

programme.

The recorder automatically starts

recording when the satellite receiver is

turned on.

, The Synchro-Rec function was activated.

Turn off the satellite receiver and cancel the

Synchro-Rec function (page 55).

The clock does not appear in the front

panel display when the recorder is turned

off.

, “Dimmer” in the “Others” setup is set to

“Save Power” (page 100).

Dubbing

You dubbed a title, but the title did not

appear in the HDD Title List.

, The title contained a copy protection signal,

so it was moved (page 78).

High-speed dubbing is not possible.

, The title cannot be dubbed at high-speed

(page 77). Even if A-B erasure is performed

so that a title does not contain mixed picture

sizes, it is still treated as a title with mixed

picture sizes.

106

Download from Www.Somanuals.com. All Manuals Search And Download.

The disc tray does not open and “TRAY

LOCKED” appears in the front panel

display.

, Contact your Sony dealer or local

authorized Sony service facility.

Remote control

The remote does not function.

, Batteries are weak.

, The remote is too far from the recorder.

, The remote’s manufacturer code returned to

the default setting when you replaced the

batteries. Reset the code (page 17).

, The remote is not pointed at the remote

sensor on the recorder.

, Different command modes are set for the

recorder and remote. Set the same

command mode (page 18). The default

command mode setting for this recorder and

the supplied remote is DVD3.

The disc tray does not open and you

cannot remove the disc after you press Z

(open/close).

, Turn off the recorder. Once the clock

appears in the front panel display,

disconnect the mains lead. (If the recorder

does not turn off or if the clock does not

appear in the front panel display, disconnect

the mains lead anyway.) Connect the mains

lead again while pressing down A on the

recorder, and release the button when the

disc tray opens. Then, keep [/1 on the

recorder pressed for about ten seconds until

“WELCOME” appears in the front panel

display.

, Press x (stop) on the unit while the

recorder is turned off to check the current

command mode.

Others

The recorder does not operate properly.

, Restart the recorder. Press down [/1 on the

recorder for more than ten seconds until

“WELCOME” appears in the front panel

display.

, When static electricity, etc., causes the

recorder to operate abnormally, turn off the

recorder and wait until the clock appears in

the front panel display. Then, unplug the

recorder and after leaving it off for a while,

plug it in again.

“RECOVERY” appears in the front panel

display.

, The recorder’s recovery function was

activated when the recorder was turned on

because the power was turned off or failed

during recording. Leave the recorder on

until “RECOVERY” disappears from the

front panel display.

“HDD ERROR” appears in the front panel

display.

, The hard disk error occurred. Press down

[/1 on the recorder for ten seconds until

“WELCOME” appears in the front panel

display. If this does not resolve the problem,

format the recorder’s HDD by pressing

down the HDD button on the recorder for

more than ten seconds until “FORMAT”

appears in the front panel display. Note that

all the contents recorded on the HDD will

be erased. If this does not fix the problem,

contact your nearest Sony dealer.

Five numbers or letters are displayed in

the front panel display.

, The self-diagnosis function was activated

(see the table on page 108).

The disc tray does not open after you press

Z (open/close).

, It may take a few seconds for the disc tray

to open after you have recorded or edited a

DVD. This is because the recorder is adding

disc data to the disc.

The disc tray does not open and

“LOCKED” appears in the front panel

display.

, The disc tray is locked. Cancel the Child

Lock (page 59).

,continued

107

Download from Www.Somanuals.com. All Manuals Search And Download.

“FAN ERROR” appears in the front panel

display.

, Check that the vent on the rear of the

recorder is not blocked. Then, immediately

disconnect the mains lead. Leave the

recorder off for a while, then re-connect the

mains lead, and press [/1 on the recorder.

Self-diagnosis Function

(When letters/numbers

appear in the display)

When the self-diagnosis function is activated

to prevent the recorder from malfunctioning,

a five-character service number (e.g., C 13

00) with a combination of a letter and four

numbers appears in the front panel display. In

this case, check the following table.

The Parental Lock does not work.

, Check the “Parental Control” settings

(page 88).

Mechanical sound is heard when the

recorder is off.

, While the recorder is updating the EPG

information or during a timer recording,

operational noises (such as the internal fan)

may be heard, even when the power is off.

This is not a malfunction.

First three

characters of action

the service

Cause and/or corrective

number

C 13

There is a problem in the

HDD.

, Contact your nearest

Sony dealer or local

authorized service

facility.

The DVD is dirty.

, Clean the disc with a soft

cloth.

C 31

E XX

The DVD/CD is not inserted

correctly.

, Re-insert the disc

correctly.

To prevent a malfunction, the

(xx is a number) recorder has performed the

self-diagnosis function.

, Contact your nearest

Sony dealer or local

authorized Sony service

facility and give the five-

character service number.

Example: E 61 10

108

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes about the discs

• To keep the disc clean, handle the disc by its

edge. Do not touch the surface. Dust,

fingerprints, or scratches on the disc may

cause it to malfunction.

Notes About This

Recorder

On operation

• If the recorder is brought directly from a

cold to a warm location, or is placed in a

very damp room, moisture may condense

on the lenses inside the recorder. Should

this occur, the recorder may not operate

properly. In this case, if the recorder is on,

leave it on (if it is off, leave it off) for about

an hour until the moisture evaporates.

• When you move the recorder, take out any

discs and do not apply shock or vibration to

the hard disk drive. If you don’t, the disc or

hard disk drive may be damaged (page 2).

• Do not expose the disc to direct sunlight or

heat sources such as hot air ducts, or leave

it in a car parked in direct sunlight as the

temperature may rise considerably inside

the car.

• After playing, store the disc in its case.

• Clean the disc with a cleaning cloth. Wipe

the disc from the centre out.

On adjusting volume

Do not turn up the volume while listening to

a section with very low level inputs or no

audio signals. If you do, the speakers may be

damaged when a peak level section is played.

• Do not use solvents such as benzine,

thinner, commercially available cleaners, or

anti-static spray intended for vinyl LPs.

• Do not use the following discs.

– A disc that has a non-standard shape (e.g.,

card, heart).

– A disc with a label or sticker on it.

– A disc that has cellophane tape or sticker

adhesive on it.

On cleaning

Clean the cabinet, panel, and controls with a

soft cloth slightly moistened with a mild

detergent solution. Do not use any type of

abrasive pad, scouring powder or solvent

such as alcohol or benzine.

On cleaning discs, disc/lens cleaners

Do not use cleaning discs or disc/lens

cleaners (including wet or spray types).

These may cause the recorder to

malfunction.

On replacement of parts

In the event that this unit is repaired, repaired

parts may be collected for reuse or recycling

purposes.

109

Download from Www.Somanuals.com. All Manuals Search And Download.

DIGITAL OUT (COAXIAL): Phono jack/

0.5 Vp-p/75 ohms

COMPONENT VIDEO OUT

(Y, P^B/CB, PR/CR):

Specifications

System

Phono jack/Y: 1.0 Vp-p,

Laser: Semiconductor laser

Transmission standards: DVB-T

Channel coverage:

UHF: B21 to B69

B/CB: 0.7 Vp-p, PR/CR: 0.7 Vp-p

General

Power requirements: 220-240 V AC,

50/60 Hz

The above channel coverage merely ensures

the channel reception within these ranges. It

does not guarantee the ability to receive

signals in all circumstances.

Power consumption: 48 W

Dimensions (approx.):

430 × 65 × 328 mm (width/height/

depth) incl. projecting parts

Hard disk drive capacity: 80 GB

Mass (approx.): 4.4 kg

Operating temperature: 5ºC to 35ºC

Operating humidity: 25% to 80%

Supplied accessories:

Mains lead (1)

Aerial out: 75-ohm asymmetrical aerial

socket

Timer: Clock: Quartz locked/Timer

indication: 24-hour cycle (digital)/

Power back-up duration: 1 hour

Video recording format: MPEG-2,

MPEG-1

Aerial cable (1)

Audio recording format/applicable

bit rate: Dolby Digital 2 ch

256 kbps/128 kbps (in EP and SLP

mode)

Remote commander (remote) (1)

R6 (size AA) batteries (2)

Specifications and design are subject to

change without notice.

Inputs and outputs

LINE 2 OUT

(AUDIO): Phono jack/2 Vrms/10 kilohms

(VIDEO): Phono jack/1.0 Vp-p

(S VIDEO): 4-pin mini DIN/Y: 1.0 Vp-p,

C: 0.3 Vp-p (PAL)

Compatible colour systems

This recorder is designed to record using the

PAL colour system and play back using the

PAL or NTSC colour systems.

LINE 2 IN

(AUDIO): Phono jack/2 Vrms/more than

22 kilohms

(VIDEO): Phono jack/1.0 Vp-p

(S VIDEO): 4-pin mini DIN/Y: 1.0 Vp-p,

C: 0.3 Vp-p (PAL)

LINE 1 – TV: 21-pin

CVBS IN/OUT

S-Video/RGB OUT (upstream)

LINE 3: 21-pin

CVBS IN/OUT

S-Video/RGB IN

S-Video OUT (downstream)

DV IN: 4-pin/i.LINK S100

110

Download from Www.Somanuals.com. All Manuals Search And Download.

i.LINK baud rate

About i.LINK

i.LINK’s maximum baud rate varies

according to the equipment. Three maximum

baud rates are defined:

S100 (approx. 100 Mbps*)

S200 (approx. 200 Mbps)

The DV IN jack on this recorder is i.LINK-

compliant for digital video cameras. This

section describes the i.LINK standard and its

features.

S400 (approx. 400 Mbps)

What is i.LINK?

The baud rate is listed under “Specifications”

in the instruction manual of each equipment.

It is also indicated near the i.LINK jack on

some equipment.

The maximum baud rate of equipment on

which it is not indicated such as this unit is

“S100.”

When units are connected to equipment

having a different maximum baud rate, the

baud rate sometimes differs from the

indicated baud rate.

i.LINK is a digital serial interface for

handling digital video, digital audio and other

data in two directions between equipment

having the i.LINK jack, and for controlling

other equipment.

i.LINK-compatible equipment can be

connected by a single i.LINK cable. Possible

applications are operations and data

transactions with various digital AV

equipment. When two or more i.LINK-

compatible equipment are connected to this

recorder in a daisy chain, operations and data

transactions are possible with not only the

equipment that this recorder is connected to

but also with other devices via the directly

connected equipment.

* What is Mbps?

Mbps stands for megabits per second, or the

amount of data that can be sent or received in one

second. For example, a baud rate of 100 Mbps

means that 100 megabits of data can be sent in

one second.

Note, however, that the method of operation

sometimes varies according to the

characteristics and specifications of the

equipment to be connected, and that

operations and data transactions are

sometimes not possible on some connected

equipment.

i.LINK functions on this

recorder

For details on how to dub when this recorder

is connected to other video equipment having

DV jacks, see page 82.

The DV jack on this recorder can only input

DVC-SD signals. It cannot output signals.

The DV jack will not accept MICRO MV

signals from equipment such as a MICRO

MV digital video camera with an i.LINK

jack.

b Note

Normally, only one piece of equipment can be

connected to this recorder by the i.LINK cable (DV

connecting cable). When connecting this recorder

to i.LINK-compatible equipment having two or

more i.LINK jacks (DV jacks), see the instruction

manual of the equipment to be connected.

For further precautions, see the notes on

page 82.

For details on precautions when connecting

this recorder, also see the instruction manuals

for the equipment to be connected.

About the name “i.LINK”

i.LINK is a more familiar term for IEEE 1394

data transport bus proposed by SONY, and is

a trademark approved by many corporations.

IEEE 1394 is an international standard

standardized by the Institute of Electrical and

Electronics Engineers.

Required i.LINK cable

Use the Sony i.LINK 4-pin-to-4-pin cable

(during DV dubbing).

i.LINK and are trademarks.

111

Download from Www.Somanuals.com. All Manuals Search And Download.

Guide to Parts and Controls

For more information, see the pages in parentheses.

Remote

L DISPLAY button (28)

TIME/TEXT button (28)

Coloured multimedia applications &

interactive services control buttons (37)

CHAPTER MARK button (72)

CHAPTER MARK ERASE button (72)

N SYSTEM MENU button (85, 87)

TITLE LIST button (26, 58, 69)

GUIDE (Electronic Programme

Guide) button (37, 48)

INFO button (39)

Favourite button (42)

Q O RETURN button (52)

R </M/m/,/ENTER button (20)

PAGE/ALBUM

T OPTIONS button (35)

U ./> (previous/next) buttons (60)

V mc CM (search/slow/

button s (26,65)

freeze frame) buttons (60)

W [TIMER] button (45)

X H (play) button (58)

X (pause) button (60)

A HDD button (24)

DVD button (24)

x (stop) button (58)

The H button has a tactile dot*.

B [/1 (on/standby) button (20)

Y TV/RADIO button (41)

C Z (open/close) button (24)

Z z REC button (24)

D PROG (programme) +/– buttons (24)

x REC STOP button (24)

c z SYNCHRO REC button (55)

REC MODE button (24)

The + button has a tactile dot*.

E Number buttons (48, 64)

The number 5 button has a tactile dot*.

wj TV 2(volume) +/– buttons (17)

wk TV [/1 (on/standby) button (17)

wl TV/DVD button (17)

F INPUT SELECT button (57, 82)

G AUDIO button (60)

The AUDIO button has a tactile dot*.

e; TV t button (17)

H SUBTITLE button (60)

ea TV PROG (programme) +/– buttons (17)

I MENU button (58)

The + button has a tactile dot*.

* Use the tactile dot as a reference when operating

the recorder.

Text button (41)

K TOP MENU button (58)

112

Download from Www.Somanuals.com. All Manuals Search And Download.

Front panel

A [/1 (on/standby) button (20)

B Front panel display (114)

C Disc tray (24)

K HDD button/indicator (24)

DVD button/indicator (24)

DV IN jack (82)

M ONE-TOUCH DUB button (84)

D A (open/close) button (24)

N PROGRAM +/– buttons (24)

E TIMER REC indicator (45)

The + button has a tactile dot*.

SYNCHRO REC indicator (55)

O INPUT SELECT button (55, 82)

F H (play) button (58)

P REC MODE button (24)

G x (stop) button (58)

Q LINE 2 IN (S VIDEO/VIDEO/

(remote sensor) (17)

L(MONO) AUDIO R) jacks (22)

I z REC button (24)

* Use the tactile dot as a reference when operating

the recorder.

J x REC STOP button (24)

,continued

113

Download from Www.Somanuals.com. All Manuals Search And Download.

Front panel display

SMARTLINK

DVD

VCD TV

HDD

DVD

A HDD/DVD indicators

D Displays the following:

• Playing time/remaining time

• Current title/chapter/track/index

number

Displays the selected media and the

playing/recording status.

B Dubbing direction indicator

• Recording time/recording mode

• Clock

C SMARTLINK indicator (14)

• Programme position

• TV Direct Rec indication (24):

“TV” appears in the right most two

digits.

E TV indicator (24)

F Disc type*

(angle) indicator (58)

* Displays DATA CDs as “CD.”

z Hint

You can turn off the front panel display when the recorder is turned off by setting “Dimmer” to “Save

Power” in the “Others” setup (page 100).

Rear panel

A AERIAL IN/OUT jacks (12)

E COMPONENT VIDEO OUT

(Y, P^B/CB, PR/CR) jacks (13)

B DIGITAL OUT (COAXIAL) jack (15)

F LINE 3 jack (21)

C LINE 2 OUT (R-AUDIO-L/VIDEO)

jacks (13, 15)

G AC IN terminal (16)

H LINE 1 – TV jack (13)

D LINE 2 OUT (S VIDEO) jack (13)

114

Download from Www.Somanuals.com. All Manuals Search And Download.

Language Code List

For details, see page 87.

The language spellings conform to the ISO 639: 1988 (E/F) standard.

Code Language

1027 Afar

1183 Irish

1347 Maori

1507 Samoan

1508 Shona

1509 Somali

1511 Albanian

1512 Serbian

1513 Siswati

1514 Sesotho

1515 Sundanese

1516 Swedish

1517 Swahili

1521 Tamil

1028 Abkhazian

1032 Afrikaans

1039 Amharic

1044 Arabic

1045 Assamese

1051 Aymara

1052 Azerbaijani

1053 Bashkir

1057 Byelorussian

1059 Bulgarian

1060 Bihari

1061 Bislama

1066 Bengali;

Bangla

1067 Tibetan

1070 Breton

1079 Catalan

1093 Corsican

1097 Czech

1103 Welsh

1105 Danish

1109 German

1130 Bhutani

1142 Greek

1144 English

1145 Esperanto

1149 Spanish

1150 Estonian

1151 Basque

1157 Persian

1165 Finnish

1166 Fiji

1186 Scots Gaelic

1194 Galician

1196 Guarani

1203 Gujarati

1209 Hausa

1349 Macedonian

1350 Malayalam

1352 Mongolian

1353 Moldavian

1356 Marathi

1357 Malay

1358 Maltese

1363 Burmese

1365 Nauru

1217 Hindi

1226 Croatian

1229 Hungarian

1233 Armenian

1235 Interlingua

1239 Interlingue

1245 Inupiak

1248 Indonesian

1253 Icelandic

1254 Italian

1257 Hebrew

1261 Japanese

1269 Yiddish

1283 Javanese

1287 Georgian

1297 Kazakh

1298 Greenlandic

1299 Cambodian

1300 Kannada

1301 Korean

1305 Kashmiri

1307 Kurdish

1311 Kirghiz

1369 Nepali

1376 Dutch

1525 Telugu

1527 Tajik

1528 Thai

1379 Norwegian

1393 Occitan

1403 (Afan)Oromo

1408 Oriya

1417 Punjabi

1428 Polish

1435 Pashto;

Pushto

1436 Portuguese

1463 Quechua

1481 Rhaeto-

Romance

1482 Kirundi

1483 Romanian

1489 Russian

1491 Kinyarwanda

1495 Sanskrit

1498 Sindhi

1501 Sangho

1502 Serbo-

Croatian

1529 Tigrinya

1531 Turkmen

1532 Tagalog

1534 Setswana

1535 Tonga

1538 Turkish

1539 Tsonga

1540 Tatar

1543 Twi

1557 Ukrainian

1564 Urdu

1572 Uzbek

1581 Vietnamese

1587 Volap k

1613 Wolof

1632 Xhosa

1665 Yoruba

1684 Chinese

1697 Zulu

1313 Latin

1326 Lingala

1327 Laothian

1332 Lithuanian

1334 Latvian;

Lettish

1171 Faroese

1174 French

1181 Frisian

1503 Singhalese

1505 Slovak

1506 Slovenian

1345 Malagasy

1703

Not specified

Area Code

For details, see page 98.

Code Area

2044 Argentina

2047 Australia

2046 Austria

2057 Belgium

2070 Brazil

2079 Canada

2090 Chile

2165 Finland

2174 France

2109 Germany

2248 India

2238 Indonesia

2254 Italy

2276 Japan

2304 Korea

2363 Malaysia

2362 Mexico

2149 Spain

2376 Netherlands

2390 New Zealand

2379 Norway

2427 Pakistan

2424 Philippines

2436 Portugal

2489 Russia

2499 Sweden

2086 Switzerland

2528 Thailand

2184 United

Kingdom

2092 China

2115 Denmark

2501 Singapore

115

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

CD 10

DATA CD 10

“Digital Out” 95

Digital Services

“Change Angle” 58

“Change Order” 74

Chapter 29, 52, 72

CHAPTER MARK 72

CHAPTER MARK

ERASE 72

Chapter number 29

“Chapter Search” 64

Chasing Playback 63

“Check Overlap” 53, 54

Checking/changing/

cancelling timer settings

Words in quotations appear

in the on-screen displays.

Digital Text viewing

EPG 37

Favourites 41

Index 43

Programme

Numerics

16:9 20, 92

4:3 Letter Box 20, 92

4:3 Pan Scan 20, 92

“48kHz/96kHz PCM” 96

information 39

Digital Software Upgrade

Digital video camera 82

“Dimmer” 100

“Disc Information” 30,

32, 35

“A-B Erase” 70

Adjusting

Child Lock 59

Clock 20, 87

playback picture 61

playback sound 62

recording picture 51

Aerial 12

Album 29, 67

Album number 29

“Album Search” 64

Angle 58

Area code 115

AUDIO 60

“Audio” 87, 95

“Audio ATT” 95

“Audio Connection” 20,

Audio cord 15

“Audio DRC” 96

“Audio Settings” 62

“Auto Chapter” 98

“Auto Display” 94

“Auto Title Erase” 46, 55,

“Colour” 51, 61

“Colour System” 94

Colour systems 110

“Combine” 74

Disc Settings 32, 35, 98

Disc space 30, 69

Disc types 8, 68

“Divide” 71

“Command Mode” 19,

Dolby Digital 15, 95

“Downmix” 96

DTS 96

DTV Settings 88

“Dub Mode” 76, 86

Dubbing

100

Component Out 20, 93

COMPONENT VIDEO

OUT 13

Connecting

the aerial cable 12

the audio cords 15

the video cords 13

“Contrast” 51, 61

Controlling TVs with the

remote 17

Copy control signals 45

Copy-Free 45

Copy-Never 45

Copy-Once 45

“Dub Mode” 76

High-speed Dubbing

Original Dubbing 77

Rec Mode

Conversion

Dubbing 78

“DV Audio Input” 83

DV Dubbing 82

One Touch Dubbing

84, 99

Auto Tune 90

“AV SYNC” 62

CPRM 9

“Create a Playlist” 72

Creating chapters 72

Program Edit 85

“DV EDIT” 85

DV IN 82

“Basic” 87

“DVD” 98

Batteries 17

“DVD Menu” 87

“DVD Rec. Picture Size”

“DVD Rec. Settings” 97

DVD VIDEO 10

“Bilingual” 56, 57

“Bilingual Recording” 97

“BNR” 61

“Brightness” 51, 61

116

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD+R 8, 68

DVD+RW 8, 68

DVD-R 8, 68

DVD-RAM 10

DVD-RW 8, 68

GB 36

Number buttons 32

“Guide Timer Extend” 97

One Touch Dubbing 84,

Handling discs 109

“HDD Rec. Picture Size”

One Touch EPG 14

One Touch Menu 59

One Touch Play 59

One Touch Timer 47

Original 27, 68

“Others” 100

Easy Setup 20, 101

Editing 68, 72

DV Edit 82

“HDD Rec. Settings” 97

“HQ Setting” 97

“Hue” 61

Enter characters 31

EPG

Viewing a list of

available

channels 37

Viewing programmes

related to a

i.LINK 111

Index 43

INPUT SELECT 57, 83

Page mode 27, 54

Parental Control 59, 98

Parental Lock 88

Parts and controls 112

“Password” 100

specific

category 38

“Erase” 69, 73, 86

Erase all titles 70

“Erase Titles” 70

“Extend Rec.” 47

JPEG image files 65

“Pause Mode” 94

“PB Video Equalizer” 61

PBC 58

Labelling 32

Picture quality 51, 61

“Language” 87

LINE 2 IN 22

LINE 3 21

“Line Audio Input” 56, 57

“Line1 Output” 93

“Line3 Input” 94

“Line3 Output” 94

Picture size 51

“Play Beginning” 59, 65

Play mode 29

Playable discs 10

Playback 10, 58

“Factory Setup” 101

Favourites

Setting a favourite list

Watching or listening

to a favourite

channel 42

fast forward 60

fast reverse 60

freeze frame 60

instant advance 60

instant replay 60

JPEG image files 65

MP3 audio tracks 65

resume play 59

Main sound 60, 97

Mains Lead 16

“Make a Playlist” 74

Manual Clock Set 87

Manufacturer Information

“File Search” 64

“Finalise” 34

“Finalise Disc” 99

Finalising 33

“FNR” 61

“Format” 35, 101

“Format DVD-RW” 99

Formatting 35

Freeze Frame 60

Front panel 113

Front panel display 29,

114

scan audio 58

slow-motion play 60

Playing status bar 29

Playlist 27, 68, 72

“Present Time” 87

“Preview” 73, 86

Program Edit 85

Programme Hide 90

Programme information 39

Programme Sort 91

“Progressive Mode” 93

“Progressive Output” 93

“Protect” 69

MENU 58

DVD’s Menu 58

Top menu 58

“Mix” 83

“MNR” 61

“Modify” 53

“Move” 73, 86

MP3 audio tracks 65

MPEG 96

,continued

117

Download from Www.Somanuals.com. All Manuals Search And Download.

“Protect Disc” 33

Protection

disc 33

Searching

fast reverse/fast

“Title Search” 64

TOP MENU 58

“Track Search” 64

Troubleshooting 102

“TV Direct Rec.” 25, 98

TV Pause 62

forward 60

locatingthebeginning

of the title/

chapter/track 60

scan audio 58

title 69

TV t 17, 25

Quick guide to disc types 8

Quick Timer 50

search mode 64

“Set Thumbnail” 70

“Sharpness” 61

Signal Strength 92

SimultaneousRecandPlay

Slow-motion play 60

SMARTLINK 14

Sort 27

“TV Type” 20, 92

TV/DVD 18, 25

Rear panel 114

REC 25

“Unfinalise” 35

Unfinalising 35

Usable discs 8, 10

REC STOP 25, 84

“Rec. Mode” 51

“Rec. Mode Adjust” 46,

“Stereo1” 83

“Stereo2” 83

“Rec. NR” 51

“Video” 20, 92, 93

VIDEO CD 10

Video cord 13

Video input 13

Video mode 8

“Video Output” 92

“Video Settings” 61

VR mode 8

“Rec. Settings” 51

“Rec. Video Equalizer” 51

Recordable discs 8

“Recording” 97

Recording 44

Sub sound 60, 97

SUBTITLE 60

“Subtitle” 87

Super VIDEO CD 10

Synchro Rec 55

picture adjustment 51

recording format 8

recording mode 25,

recording time 25, 44

while watching

another

Technical Information 91

Thumbnail picture 27

“Time Search” 64

TIME/TEXT 29

TIMER 46

programme 25

Recording time 44

Region code 11

Remaining time 29

Remote 17, 112

Resetting the recorder 101

Resume Play 59

“RGB” 20, 93

Timer List 53

Timer recording

“Auto Title Erase”

46, 55

check/change/cancel

EPG timer setting 48

manual setting 45

“Rec. Mode Adjust”

S VIDEO 13

Synchro Rec 55

“Timer Settings” 97

Title 29

TITLE LIST 58

Title List 26, 58

Sort 27

Thumbnail 27

“Title Name” 69

Title number 29

“S Video” 20, 93

Satellite receiver 23

Scan Audio 58

“Scart Setting” 93

Scene List 73

“Screen Saver” 94

“Search” 64

118

Download from Www.Somanuals.com. All Manuals Search And Download.

119

Download from Www.Somanuals.com. All Manuals Search And Download.

Printed on 100% recycled paper.

Sony Corporation Printed in Hungary

Download from Www.Somanuals.com. All Manuals Search And Download.

Silicon Image Car Satellite TV System 141B User Manual
Singer Sewing Machine G115 User Manual
Snapper Lawn Mower 1690821 User Manual
Snapper Snow Blower LE3170E User Manual
Sony Car Satellite TV System 32EX700 User Manual
Sony MP3 Player WM FX451 User Manual
Sony Projector VPL CX5 User Manual
Sony VCR CS SLV 998HF MX User Manual
Spectra Mouse KT4090 User Manual
Tanaka Chainsaw ECS 351 User Manual