3-876-078-11(3)
DVD Recorder
Operating Instructions
To find out useful hints, tips and information about Sony products and
RDR-GX380
© 2008 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
The manufacturer of this
product is Sony Corporation,
1-7-1 Konan Minato-ku
Tokyo, 108-0075 Japan. The
Authorized Representative
for EMC and product safety
is Sony Deutschland GmbH,
Hedelfinger Strasse 61,
70327 Stuttgart, Germany.
For any service or guarantee
matters please refer to the
addresses given in separate
service or guarantee
Precautions
On safety
Should any solid object or liquid fall
into the cabinet, unplug the recorder
and have it checked by qualified
personnel before operating it any
further.
Disposal of waste batteries
(applicable in the European
Union and other European
countries with separate
collection systems)
This symbol on the battery or on the
packaging indicates that the battery
provided with this product shall not be
treated as household waste.
By ensuring these batteries are
disposed of correctly, you will help
prevent potentially negative
consequences for the environment and
human health which could otherwise
be caused by inappropriate waste
handling of the battery. The recycling
of the materials will help to conserve
natural resources.
On power sources
• The recorder is not disconnected
from the AC power source (mains)
as long as it is connected to the
wall outlet, even if the recorder
itself has been turned off.
documents.
• If you are not going to use the
recorder for a long time, be sure to
disconnect the recorder from the
wall outlet. To disconnect the AC
power cord (mains lead), grasp the
plug itself; never pull the cord.
On placement
• Place the recorder in a location with
adequateventilation to prevent heat
build-up in the recorder.
• Do not place the recorder on a soft
surface such as a rug that might
block the ventilation holes.
• Do not place the recorder in a
confined space such as a bookshelf
or similar unit.
• Do not place the recorder in a
location near heat sources, or in a
place subject to direct sunlight,
excessive dust, or mechanical
shock.
• Do not place the recorder in an
inclined position. It is designed to
be operated in a horizontal
position only.
In case of products that for safety,
performance or data integrity reasons
require a permanent connection with an
incorporated battery, this battery
should be replaced by qualified service
staff only.
To ensure that the battery will be
treated properly, hand over the product
at end-of-life to the applicable
collection point for the recycling of
electrical and electronic equipment.
For all other batteries, please view the
section on how to remove the battery
from the product safely. Hand the
battery over to the applicable collection
point for the recycling of waste
batteries.
For more detailed information about
recycling of this product or battery,
please contact your local Civic Office,
your household waste disposal service
or the shop where you purchased the
product.
• Keep the recorder and discs away
from equipment with strong
magnets, such as microwave
ovens, or large loudspeakers.
• Do not place heavy objects on the
recorder.
• To prevent fire or shock hazard, do
not place objects filled with
liquids, such as vases, on the
apparatus.
On recording
Make trial recordings before making
the actual recording.
,continued
3
Download from Www.Somanuals.com. All Manuals Search And Download.
On compensation for lost
recordings
Copy guard function
About this manual
Since the recorder has a copy guard
function, programmes received
through an external tuner (not
supplied) may contain copy
protection signals (copy guard
function) and as such may not be
recordable, depending on the type of
signal.
• In this manual, “disc” is used as a
general reference for DVDs or
CDs unless otherwise specified by
the text or illustrations.
Sony is not liable and will not
compensate for any lost recordings
or relevant losses, including when
recordings are not made due to
reasons including recorder failure,
or when the contents of a recording
are lost or damaged as a result of
recorder failure or repair undertaken
to the recorder. Sony will not
restore, recover, or replicate the
recorded contents under any
circumstances.
• Icons, such as
, listed at
DVD
the top of each explanation
indicate what kind of media can be
used with the function being
explained. For details, see
IMPORTANT NOTICE
Caution: This recorder is
capable of holding a still
video image or on-screen
display image on your
• Instructions in this manual
describe the controls on the
remote. You can also use the
controls on the recorder if they
have the same or similar names as
those on the remote.
• The on-screen display illustrations
used in this manual may not match
the graphics displayed on your TV
screen.
• The explanations regarding DVDs
in this manual refer to DVDs
created on this recorder. The
explanations do not apply to
DVDs that are created on other
recorders and played back on this
recorder.
Copyrights
television screen
• Television programmes, films,
video tapes, discs, and other
materials may be copyrighted.
Unauthorized recording of such
material may be contrary to the
provisions of the copyright laws.
Also, use of this recorder with
cable television transmission may
require authorization from the
cable television transmitter and/or
programme owner.
indefinitely. If you leave the
still video image or on-
screen display image
displayed on your TV for an
extended period of time you
risk permanent damage to
your television screen.
Plasma display panels and
projection televisions are
especially susceptible to this.
• Recording equipment should be
used only for lawful copying and
you are advised to check carefully
what is lawful copying in the area
in which you are making a copy.
Copying of copyright material
such as films or music is unlawful
unless permitted by a legal
If you have any questions or
problems concerning your recorder,
please consult your nearest Sony
dealer.
exception or consented to by the
rights owner.
• This product incorporates
copyright protection technology
that is protected by U.S. patents
and other intellectual property
rights. Use of this copyright
protection technology must be
authorized by Macrovision, and is
intended for home and other
limited viewing uses only unless
otherwise authorized by
Macrovision. Reverse engineering
or disassembly is prohibited.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Guide to Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Step 1: Connecting the Aerial Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Step 2: Connecting the Video Cords/HDMI Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Step 3: Connecting the Audio Cords/HDMI Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Step 5: Preparing the Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Step 6: Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Connecting a VCR or Similar Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Connecting a PAY-TV/Canal Plus Decoder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Using the System Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Inserting and Formatting a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Recording a Programme to a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Viewing the Recorded Programme (Title List) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Checking the Playback Information and Playing Time . . . . . . . . . . . . . . . . . . . . . . . . 32
Labelling and Protecting a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Playing a DVD on Other Equipment (Finalise) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Before Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Recording Without the Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Recording From Connected Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Searching for a Title/Chapter/Track, etc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Playing Music CDs and MP3 Audio Tracks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Playing JPEG Image Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Erasing and Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Editing a Title by Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Editing a Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
,continued
5
Download from Www.Somanuals.com. All Manuals Search And Download.
DV Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Connecting a Digital Video Camera to the DV IN Jack . . . . . . . . . . . . . . . . . . . . . . . .62
Using the Setup Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Channel and Clock Settings (General) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Language Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Recording Settings (Video) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
Resetting the Recorder (Factory Set) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Recordable and Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Language Code List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Area Code List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Notes About This Recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to Parts and Controls
For more information, see the pages in parentheses.
Remote
Displays the playing status or disc
information.
1
4
7
2
5
8
0
3
6
9
c/C
(instantreplay/instant
advance/freeze frame) (47)
m
/
The H button has a tactile dot*.
Creates chapters within a title.
Selects the recording mode.
TV PROG (programme) +/– (18)
The + button has a tactile dot*.
Turns the recorder on or off.
Displays the Marker Search display.
The + button has a tactile dot*.
Marks the desired point during playback.
MENU (45)
Displays the disc’s menu.
Selects an input source.
Selects a desired item.
Switches between TV mode and DVD mode.
TIMER (38)
,continued
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Selects a subtitle language.
Changes the angles or rotates an image during
slideshow.
ZOOM (48)
Zooms an image during playback or pause
mode.
The AUDIO button has a tactile dot*.
The number 5 button has a tactile dot*.
Opens or closes the disc tray.
* Use the tactile dot as a reference when operating the
recorder.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Front panel
Turns the recorder on or off.
C Front panel display
The + button has a tactile dot*.
Shows the current status of the recorder.
REC: Indicates when recording is in progress.
TV: Indicates when the recorder is in TV
tuner mode.
Selects the resolution according to your TV.
K
L
DV IN jack (62)
Connect a DV camcorder to this jack.
PM: Indicates afternoon.
: Indicates when the recorder is in timer
recording or a timer recording is programmed.
: Shows the current status of the
recorder (clock, programme number, etc.).
USB jack (type A) (26)
Connect a USB device to this jack.
M LINE 2 IN (VIDEO/L(MONO) AUDIO R)
jacks (23)
D
(remote sensor) (18)
Connect a VCR or similar recording device to
these jacks.
Opens or closes the disc tray.
* Use the tactile dot as a reference when operating the
recorder.
The N button has a tactile dot*.
,continued
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear panel
E HDMI OUT (high-definition
multimedia interface out) jack (13)
B COMPONENT VIDEO OUT
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Hookups and Settings
Hooking Up the Recorder
Follow steps 1 to 5 to hook up the recorder, and step 6 to make the initial settings for the recorder
(page 20). Do not connect the mains lead (the power cord) until you reach “Step 4: Connecting the Mains
b Notes
• Plug cords securely to prevent unwanted noise.
• Refer to the instructions supplied with the components to be connected.
• You cannot connect this recorder to a TV that does not have a SCART or video input jack.
• Be sure to disconnect the mains lead (the power cord) of each component before connecting.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1: Connecting the Aerial Cable
Connect the aerial cable by following the steps below.
TV
to AERIAL IN
to AERIAL
OUT
Aerial cable (supplied)
to aerial input
DVD recorder
: Signal flow
1 Disconnect the aerial cable from your TV and connect it to AERIAL IN on the rear panel of the
recorder.
2 Connect AERIAL OUT of the recorder to the aerial input of your TV, using the supplied aerial
cable.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2: Connecting the Video Cords/HDMI Cord
Select one of the following patterns, A through C, according to the input jack on your TV monitor,
projector, or audio component such as an AV amplifier (receiver). This will enable you to view pictures.
A
TV
SCART cord (not supplied)
to LINE 1-TV
DVD recorder
to HDMI OUT
(blue)
(red)
(green)
to COMPONENT
VIDEO OUT
Component video
cord (not supplied)
HDMI cord
(not supplied)
(blue)
(red)
(green)
B
C
TV, projector, or audio
component
TV, projector, or
audio component
: Signal flow
,continued
13
Download from Www.Somanuals.com. All Manuals Search And Download.
A SCART input jack
When connecting to the HDMI OUT jack
Follow the steps below. Improper handling may
damage the HDMI OUT jack and the connector.
When setting [Video output format] to [RGB] in
that conforms to the selected signal.
1
Carefully align the HDMI OUT jack on the
rear of the recorder and the HDMI connector
by checking their shapes.
B Component video input jacks (Y, PB/CB, PR/
CR)
You will enjoy accurate colour reproduction and
high quality images.
Make sure the connector is not upside down or
tilted.
If your TV accepts progressive 576p format
signal, use this connection and set the
RESOLUTION button on the front panel to
to [YPBPR] in the [General] setup to send
UT
HDMI O
HDMI O
Connector is upside
down
Not straight
C HDMI input jack
Use a certified HDMI cord (not supplied) to enjoy
high quality digital picture and sound through the
HDMI OUT jack. Then while watching the
pictures, adjust the video output resolution by
pressing the RESOLUTION button on the
recorder. The indicator on the front panel display
changes with each press:
2
Insert the HDMI connector straight into the
HDMI OUT jack.
Do not bend or apply pressure to the HDMI
connector.
UT
HDMI O
576i t 576p t 720p
R
R
1080p T
1080i
To see the signals from the connected set top box
receiver when the set top box receiver is
connected to the recorder using a SCART cord
only, turn the recorder on.
b Notes
• Be sure to disconnect the HDMI cord when moving the
recorder.
• Do not apply too much pressure to the cabinet wall, if
you place the recorder on the cabinet with the HDMI
cord connected. It may damage the HDMI OUT jack or
the HDMI cord.
• Do not twist the HDMI connector while connecting to
or disconnecting from the HDMI OUT jack to avoid
damaging the HDMI OUT jack and connector.
When playing “wide screen” images
Some recorded images may not fit your TV
If you are connecting to a VCR
Connect your VCR to the LINE 3/DECODER
14
Download from Www.Somanuals.com. All Manuals Search And Download.
b Notes
• Do not connect more than one type of video cord
between the recorder and your TV at the same time.
• Do not make connections A and C at the same time.
• Consumers should note that not all High Definition
television sets are fully compatible with this product
and may cause artifacts to be displayed in the picture.
In case of 625 progressive scan picture problems, it is
recommended that the user switch the connection to the
‘Standard Definition’ output. If there are questions
regarding our TV set compatibility with this model
625p DVD recorder, please contact our customer
service center.
• When you connect the recorder to your TV via the
SCART jack, the TV’s input source is set to the
recorder automatically when you turn on the recorder.
If necessary, press the TV t button on the remote to
return the input to the TV.
• You cannot connect the HDMI OUT jack (connection
C) to DVI jacks that are not HDCP compliant (e.g.,
DVI jacks on PC displays).
• When your TV accepts progressive video signals, the
COMPONENT VIDEO OUT jacks output progressive
576p format signals, even if 720p, 1080i or 1080p is
selected by the RESOLUTION button.
• When connecting to the HDMI OUT jack with output
resolution 720p, 1080i, or 1080p, aspect ratio is
automatically set to 16:9. To watch the picture in 4:3,
set the output resolution to 576i or 576p by pressing the
RESOLUTION button on the recorder, and set the
aspect ratio of the connected TV to 4:3.
* This DVD recorder incorporates High-Definition
Multimedia Interface (HDMI™) technology.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3: Connecting the Audio Cords/HDMI Cord
Select one of the following patterns, A or B, according to the input jack on your TV monitor, projector,
or audio component such as an AV amplifier (receiver). This will enable you to listen to sound.
[Speakers]
Rear (L)
[Speakers]
Rear (R)
A
Audio component with
a decoder
Front (L)
Front (R)
Centre
Subwoofer
or
to coaxial/HDMI digital input
Coaxial digital
cord (not supplied)
HDMI cord
(not supplied)
to DIGITAL OUT (COAXIAL)
to HDMI OUT
PCM/DTS/
MPEG/
DOLBY DIGITAL
COAXIAL
DIGITAL OUT
HDMI OUT
DVD recorder
to AUDIO OUT (L/R)
INPUT
L
B
(red)
(white)
(red)
AUDIO
R
Audio cord (not
supplied)
(white)
TV, projector, or
audio component
: Signal flow
A Digital audio input jack
B Audio L/R (left/right) input jacks
This connection will use your TV’s or audio
component’s two speakers for sound.
*1
If your audio component has a Dolby Digital,
*2
DTS , or MPEG audio decoder and a digital
input jack, use this connection. You can enjoy
Dolby Digital (5.1ch), DTS (5.1ch), and MPEG
audio (5.1ch) surround effects.
z Hint
For correct speaker location, refer to the operating
instructions supplied with the connected components.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
b Notes
• Do not connect your TV’s audio output jacks to the
LINE 2 IN (R-AUDIO-L) jacks at the same time. This
will cause unwanted noise to come from your TV’s
speakers.
• With connection B, do not connect the LINE 2 IN (R-
AUDIO-L) and AUDIO OUT (L/R) jacks to your TV’s
audio output jacks at the same time. This will cause
unwanted noise to come from your TV’s speakers.
• With connection A, after you have completed the
connection, make the appropriate settings in the
noise will come from your speakers.
Step 4: Connecting the
Mains Lead (Power Cord)
Connect the supplied mains lead (the power cord)
to the AC IN terminal of the recorder. Then plug
the recorder and TV mains leads (AC power
cords) into the mains. After you connect the mains
lead (the power cord), you must wait for a
short while before operating the recorder.
You can operate the recorder once the front panel
display lights up and the recorder enters standby
mode.
• When you connect the recorder to an audio component
using an HDMI cord, you will need to do one of the
following:
– Connect the audio component to the TV with the
HDMI cord, or
– Connect the recorder to the TV with a component
video cord.
If you connect additional equipment to this
lead (the power cord) after all connections are
complete.
*1
*2
~AC IN
to AC IN
1
2
to mains
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling TVs with the remote
Step 5: Preparing the
Remote
You can adjust the remote’s signal to control your
TV.
You can control the recorder using the supplied
remote. Insert two R6 (size AA) batteries by
matching the 3 and # ends on the batteries to the
markings inside the battery compartment. When
using the remote, point it at the remote sensor
on the recorder.
b Notes
• Depending on the connected unit, you may not be able
to control your TV with some or all of the buttons
below.
• If you enter a new code number, the code number
previously entered will be erased.
1
4
7
2
5
8
0
3
6
9
Number
buttons
TV/DVD
DISPLAY
b Notes
• If the supplied remote interferes with your other Sony
DVD recorder or player, change the command mode
• Use the batteries correctly to avoid possible leakage
and corrosion. Should leakage occur, do not touch the
liquid with bare hands. Observe the following:
– Do not use a new battery with an old battery, or
batteries of different manufacturers.
– Do not attempt to recharge the batteries.
– If you do not intend to use the remote for an extended
period of time, remove the batteries.
TV [/1
TV t
TV 2 +/–
TV PROG
+/–
1 Hold down TV [/1 located at the bottom of
– If battery leakage occurs, wipe out any liquid inside
the battery compartment, and insert new batteries.
the remote.
• Do not expose the remote sensor (marked
on the
Do not press the [/1 button at the top of the
front panel) to strong light, such as direct sunlight or a
lighting apparatus. The recorder may not respond to the
remote.
• When you replace the batteries of the remote, the code
number and Command Mode may be reset to the
default setting. Set the appropriate code number and
Command Mode again.
remote.
2 With TV [/1 pressed down, enter the TV’s
manufacturer code using the number
buttons.
For instance, to enter “09,” press “0” then “9.”
After you enter the last number, release the
TV [/1 button.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Code numbers of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your TV.
If you have a Sony DVD player or
more than one Sony DVD recorder
If the supplied remote interferes with your other
Sony DVD recorder or player, set the command
mode number for this recorder and the supplied
remote to one that differs from the other Sony
DVD recorder or player after you have completed
Manufacturer
Sony
Code number
01 (default)
Hitachi
24
JVC
33
LG/Goldstar
Panasonic
Philips
76
The default command mode setting for this
recorder and the supplied remote is “3.”
The remote does not function if different
command modes are set for the recorder and
remote. Set the same command mode.
17, 49
06, 08, 72
71
Samsung
Sharp
29
x
Toshiba
38
The remote performs the following:
Buttons
Operations
PROGRAM +/–
TV [/1
Turns your TV on or
off.
TV 2 (volume) +/– Adjusts the volume of
your TV.
1
4
7
2
5
8
0
3
6
9
Number
buttons
TV PROG +/–
Selectstheprogramme
position on your TV.
TV t (input select) Switches your TV’s
input source.
</M/m/,,
ENTER
To operate the TV/DVD button
(for SCART connections only)
The TV/DVD button switches between TV mode
and DVD mode. Press the TV/DVD button when
in stop mode or no menu appears on the TV
screen. Point your remote at the recorder when
using this button.
TV mode: switch to this when you use the TV’s
tuner mainly. When you start playback, the input
source for the TV is set to the recorder
automatically.
DVD mode: switch to this when you use the
recorder’s tuner mainly.
To check the current mode, press DISPLAY
1 Turn off the recorder.
2 Hold down x on the recorder until “codE”
appears on the front panel display.
3 Press PROGRAM +/– on the recorder to
select the command mode (1, 2, or 3).
The selected command mode appears on the
front panel display.
4 Hold down the remote’s ENTER and 1, 2,
or 3 of the number buttons corresponding
to the command mode selected in step 3,
for more than three seconds.
,continued
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing programme positions of
the recorder using the remote
Step 6: Initial Setup
Make the basic adjustments by following the on-
screen instructions in “Initial Setup.”
Be careful not to disconnect the cables or exit the
“Initial Setup” function during this procedure.
You can change programme positions of the
recorder using the number buttons.
Example: for channel 50
Press “5,” “0,” then press ENTER.
[/1
1
4
7
2
5
8
0
3
6
9
</M/m/,,
ENTER
O
RETURN
TV [/1
1 Turn on the recorder and your TV. Then
switch the input selector on your TV so that
the signal from the recorder appears on
your TV screen.
The [LANGUAGE] display appears.
2 Select a language for the on-screen
displays using M/m, and press ENTER.
3 Check the antenna connection according to
the display, and press ENTER.
4 While [Start] is selected, press ENTER.
The Auto Channel Setting starts.
To cancel the Auto Channel Setting, select
[Cancel] and press ENTER.
To set the programme positions manually, see
When the Auto Channel Setting finishes, the
[Clock Setting] display appears.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Select [Auto] and press ENTER.
The Auto Clock Set function is not available
for Russian model.
6 When the Initial Setup is completed, select
[Exit] and press ENTER.
To return to the previous step
Press O RETURN or < according to the
display.
z Hint
If you want to run “Initial Setup” again, select the
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a VCR or Similar Device
After disconnecting the recorder’s mains lead (the power cord) from the mains, connect a VCR or similar
recording device to the LINE IN jacks of this recorder.
Use the DV IN jack on the front panel if the equipment has a DV output jack (i.LINK jack) (page 62).
See also the operating instructions supplied with the connected equipment.
Connecting to the LINE 3/DECODER jack
Connect a VCR or similar recording device to the LINE 3/DECODER jack of this recorder.
VCR
TV
SCART cord
(not supplied)
to SCART input
to LINE 3/
DECODER
DVD recorder
to LINE 1-TV
b Notes
• Pictures containing copy protection signals that prohibit any copying cannot be recorded.
• If you pass the recorder signals via the VCR, you may not receive a clear image on your TV screen.
DVD recorder
VCR
TV
Be sure to connect your VCR to the DVD recorder and your TV in the order shown below. To watch video tapes,
watch the tapes through a second line input on your TV.
Line input 1
VCR
DVD recorder
TV
Line input 2
• When you record to a VCR from this DVD recorder, do not switch the input source to TV by pressing the TV/DVD
button on the remote.
• To watch the connected VCR or similar device’s pictures through the recorder while the recorder is in standby mode,
• If you disconnect the recorder’s mains lead (the power cord), you will not be able to view the signals from the
connected VCR.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to the LINE 2 IN jacks
Connect a VCR or similar recording device to the LINE 2 IN jacks of this recorder.
VCR, etc.
OUTPUT
VIDEO
AUDIO
L
R
Audio/video cord
(not supplied)
to LINE 2 IN
DVD recorder
: Signal flow
z Hint
When the connected equipment outputs only monaural sound, use audio cords that distribute monaural sounds to left/
right channels (not supplied).
b Notes
• Do not connect the output jack of this recorder to another equipment’s input jack with the other equipment’s output
jack connected to the input jack of this recorder. This may cause noise (feedback).
• Do not connect more than one type of video cord between the recorder and your TV at the same time.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Satellite or Digital Tuner
Connect a satellite or digital tuner to this recorder using the LINE 3/DECODER jack. Disconnect the
recorder’s mains lead (the power cord) from the mains when connecting the tuner.
TV
to SCART input
SCART cord
Satellite tuner,
CanalSat, etc.
(not supplied)
to LINE 3/
DECODER
to
LINE 1-TV
DVD recorder
z Hint
You do not need to turn on the recorder to view the signals from the connected tuner on your TV.
b Notes
• If you are using a B Sky B tuner, be sure to connect the tuner’s VCR SCART jack to the LINE 3/DECODER jack.
• If you disconnect the recorder’s mains lead (the power cord), you will not be able to view the signals from the
connected tuner.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a PAY-TV/Canal Plus Decoder
You can watch or record PAY-TV/Canal Plus programmes if you connect a decoder (not supplied) to the
recorder. Disconnect the recorder’s mains lead (the power cord) from the mains when connecting the
decoder.
To watch or record PAY-TV/Canal Plus programmes, set your recorder to receive the channels using the
TV
Aerial cable (supplied)
to AERIAL IN
to SCART input
SCART cord
PAY-TV/Canal
(not supplied)
Plus decoder
SCART cord
(not supplied)
to AERIAL
OUT (TO TV)
to LINE 3/
to
DECODER
LINE 1-TV
DVD recorder
z Hint
You do not need to turn on the recorder to view the signals from the connected tuner on your TV.
b Notes
• To watch or record PAY-TV/Canal Plus programmes from the LINE 1-TV jack, set [Line 3 In] in the [General] setup
• If you disconnect the recorder’s mains lead (the power cord), you will not be able to view the signals from the
connected decoder.
• To watch the connected external decoder (PAYTV/Canal Plus analogue decoder) programmes while the recorder is
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the USB Device
You can connect a USB memory to the USB jack on the recorder to play the MP3 audio tracks, JPEG
image files, or DivX video files. Refer to the operating instructions supplied with the USB memory before
connecting.
For details about playing the inserted USB memory, see “Playing from the USB memory” on page 46.
DVD recorder
to USB jack
USB memory
b Notes
• This recorder supports only USB memory with FAT16
or FAT32 format.
• USB memory that requires additional program
installation when you have connected it to a PC is not
supported.
• This recorder is compatible with USB memory that
supports USB 1.1.
• Some USB memory may not work with this recorder.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
System Menu
Media
Video(Title)
Video(DivX)
Photo
Basic Operation
Timer Record
Setup
Music
Using the System Menu
The System Menu appears when you press
SYSTEM MENU, and provides entries to the
recorder’s functions.
[Media] (page 45)
Select an option by pressing M/m and ENTER. If
necessary, select a sub option and press ENTER.
Displays the contents of a disc or USB memory.
[Video (Title)]: Displays the Title List.
[Video (DivX)]: Displays the Movie List on
DATA DVD or USB memory.
[Photo]: Displays the Photo Album on DATA
DVD, DATA CD, or USB memory.
[Music]: Displays the Music Jukebox on DATA
DVD, DATA CD, or USB memory.
1
4
7
2
5
8
0
3
6
9
SYSTEM
MENU
You can select DivX video files, JPEG image
files, or MP3 audio tracks on a DATA CD/DATA
DVD or USB memory.
Select a file type and press ENTER. Then select a
media type, [Disc] or [USB].
</M/m/,,
ENTER
[Timer Record] (page 38)
Displays the Timer List.
Used to set a new timer recording for a disc, as
well as change or cancel timer recordings you set.
[Setup] (page 65)
Displays the Setup menu for setting up the
recorder to suit your preferences.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Press ENTER while [OK] is selected.
The recorder starts formatting the disc.
The display shows the approximate time
required.
Inserting and Formatting a
Disc
• For a DVD-RW, the recorder automatically
formats in Video mode. To format in VR
mode, see “Reformatting a disc” below.
+
+
-
R
-
-
RWVR RWVideo
RW
R
When you first insert a new disc, the recorder will
ask you to format the disc. Follow the steps below
to format the disc. You can also reformat a
DVD+RW or DVD-RW to create a blank disc.
z Hint
For a formatted disc, you can use the disc after “REAd”
disappears from the front panel display in step 5 above.
Z
"/1
Reformatting a disc
1
4
7
2
5
8
0
3
6
9
+
RW
-
-
RWVR RWVideo
You can erase all contents of a disc to create a
blank disc. To format a new DVD-RW in VR
mode, reformat the disc.
SYSTEM
MENU
</M/m/,,
ENTER
1 Insert a disc.
2 Press SYSTEM MENU to turn on the System
Menu.
1 Turn on the TV.
3 Select [Setup] and press ENTER.
The Setup display appears.
2 Press &/1.
The recorder turns on.
4 Select
[Disc] and press ENTER.
3 Switch the input selector on your TV so that
the signal from the recorder appears on the
TV screen.
5 Select [Format DVD] and press ENTER.
Format DVD
Finalize
Start
4 Press Z (open/close), and place a disc on
the disc tray.
Input Disc Name
Protect Disc
PBC
DivX
Labelled side facing up
6 While [Start] is selected, press ENTER.
The display asks for confirmation.
• For DVD-RWs, select a recording format
(VR mode or Video mode) and press
ENTER.
5 Press Z (open/close) to close the disc
tray.
After “REAd” disappears from the front panel
display, the display asks for confirmation.
• For a DVD-R, the recorder automatically
formats.
7 Select [OK] and press ENTER.
Formatting starts.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
To stop recording
Press x REC STOP. Note that it may take a few
seconds for recording to stop.
Recording a Programme to
a Disc
z Hint
This recorder can record on various discs. Select the disc
+
RW
-
-
+
R
-
R
RWVR RWVideo
This section introduces the basic operation to
record the current TV programme to a disc.
1
4
7
2
5
8
0
3
6
9
PROG +/–
x REC STOP
REC MODE
z REC
1 Insert a disc.
For details on how to insert and format a new
2 Press PROG +/– to select the programme
position you want to record.
3 Press REC MODE repeatedly to select the
recording mode.
Each time you press the button, the display
changes on the TV screen as follows:
HQ
SP
LP
EP
ULP
For details about the recording mode, see
4 Press z REC.
Recording starts and “REC” (red) appears in
the front panel display.
Recording continues until you stop the
recording or the disc is full.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Displays the disc type.
Viewing the Recorded
Programme (Title List)
C Disc space bar/remaining time:
Press REC MODE repeatedly to show the
remaining time in each of the recording
modes.
+
-
-
+
R
-
R
RWVR RWVideo
RW
The titles of programmes recorded on a disc are
displayed in the Title List, which also displays
disc information, such as disc name, remaining
time, etc. Follow the steps below to play the
recorded programme.
D Title’s thumbnail picture:
Press </, to select the previous/next title.
If more than six titles are listed, press M/m to
display titles on the previous/next pages row
by row.
You can also edit individual titles from the Title
E Title information:
Displays the title name, recording date, and
recording time.
Press DISPLAY to show detailed information
for the selected title (not available for a
Playlist title).
1
4
7
2
5
8
0
3
6
9
3 Select a title and press ENTER.
The sub-menu appears with options
applicable to the selected title. The options
displayed differ depending on the situation
and disc type.
TITLE LIST
</M/m/,,
ENTER
Title List Original
1/7
0:15:00
0:25:00
DISPLAY
O RETURN
DVD-VR
2hour 45min
SP Remain
Title 1
07/12
Title 2
0:45:00 09/12
Title 3
1:00:00 10/12
x
REC MODE
Play
Search
Erase
Title 4
13/12
Title 5
0:10:00 16/12
Title 6
0:10:00 19/12
Edit
Play List
Options for the selected title
1 Insert a disc.
• If you want to turn off the sub-menu and
re-select other title, press O RETURN.
2 Press TITLE LIST.
The Title List menu appears with the contents
of the disc.
4 Select [Play] and press ENTER.
Playback starts from the selected title on the
disc.
Example: Title List (Original) on a DVD-RW
(VR mode)
• To play a title including hidden chapters on
a DVD+RW/DVD+R, select [Full Play].
For details about hidden chapters, see
Title List Original
1/7
0:15:00
0:25:00
DVD-VR
2hour 45min
SP Remain
Title 1
07/12
Title 2
Title 3
1:00:00 10/12
0:45:00 09/12
About the Title List for DVD-RWs (VR mode)
Each time you press TITLE LIST, you can switch
the Title List to show original or Playlist.
Title 4
13/12
Title 5
Title 6
0:10:00 19/12
0:10:00 16/12
A Title type (DVD-RW (VR mode) only):
Displays the title type, original or Playlist.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
b Notes
To search for a specific point of the title
Select [Search] and press ENTER in step 4. Select
[Time] and press ENTER.
While watching the preview, press </, to
select the start point. Each press moves the point
forward or backward one minute (or five minute if
you hold). Then, press ENTER.
• The Title List may not appear for discs created on other
DVD recorders.
• Letters that cannot be displayed appear as corrupt
characters.
• Title thumbnail pictures are displayed only on this
recorder.
• It may take a few seconds for the thumbnail pictures to
be displayed.
To stop playback
Press x.
To turn off the Title List
Press O RETURN.
Chapter List
+
RW
-
-
+
R
-
R
RWVR RWVideo
When you select [Chapter] in [Search] from the
sub-menu for a title, the Chapter List menu
appears with the title contents displayed as
chapters.
You can play or edit individual chapters from the
sub-menu, which appears when you select a
chapter and press ENTER.
Chapter List Original
1/5
Title 1
07/12/2008 Sun 0:45:00 AUTO
A Title information
B Chapter’s thumbnail picture
Press </, to select the previous/next
chapter. If more than six chapters are listed,
press M/m to display chapters on the previous/
next pages row by row.
To return to the Title List
Select a chapter and press ENTER. Select [Title
List] from the sub-menu and press ENTER.
z Hint
After recording, the first scene of the recording (the title)
is automatically set as the title thumbnail picture.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
To change or select the setting
Press DISPLAY twice.
Checking the Playback
Information and Playing
Time
For details about each item, see the pages in
parentheses.
Example: When playing a DVD
+
-
-
+
R
-
R
RWVR RWVideo
RW
DVD
VCD
DVD
DVD
1/1
1/23
You can check the playback information and
remaining time displayed on the TV screen by
pressing DISPLAY repeatedly. The items
displayed differ depending on the disc type or
playing status.
0:00:30
D5.1CH
1.ENG
1 ENG
1/1
Normal
Titles
1
4
7
2
5
8
0
3
6
9
(Titles): Current title (or track) number/total
(Chapters): Current chapter number/total
(Audio): Selected audio language (DVD
VIDEO only) or audio channel (page 47)
(Angle): Selected angle/total number of
angles (page 47)
</M/m/,,
ENTER
DISPLAY
(Sound): Selected sound mode. Select [3D
SUR.] to enjoy virtual surround sound effects
created from the front left and right speakers.
Press DISPLAY to show various playback
information on the TV screen.
b Notes
• If no button is pressed for ten seconds, the playback
information display will turn off.
• Playing time of MP3 audio tracks may not be displayed
correctly.
Example: When playing a DVD
Title
Chapter : 1 / 23
: 1 / 1
DVD
0:00:01 / 0:45:00
• If you create a Playlist title longer than “19:59:59,” the
front panel counter is reset to “10:00:00” and restarts
counting.
Notes on Surround effect
A Elapsed playing time/remaining time
• The function may not work with some discs.
• When you turn on this function, turn off the surround
settings of the connected TV or amplifier (receiver).
• Make sure that your listening position is between and
at an equal distance from your speakers, and that the
speakers are located in similar surroundings.
• The function does not work if you connect to an
amplifier using the DIGITAL OUT (COAXIAL)/
HDMI OUT jack.
B Current title and chapter number/total
number of titles and chapters
b Note
When playing a title recorded over 12 hours by other
DVD equipment, time display may not appear correctly.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Select [Title Name] and press ENTER.
The display for entering characters appears.
Changing the Name of a
Recorded Programme (Title
Input)
Input row
Character type box
Language
English/Latin Capital
1
A
K
U
2
B
L
V
3
C
4
D
N
X
5
E
O
Y
6
F
P
Z
7
8
H
R
9
I
0
J
T
+
RW
-
-
+
R
-
R
RWVR RWVideo
G
Q
M
W
S
The titles recorded on a disc are named
sequentially ([Title 1], [Title 2], …) by default.
You can rename titles using the display for
entering characters, which also appears for
renaming a disc or station.
Space
Erase
OK Cancel
Setting buttons
Character palette
Up to 21 characters can be entered for a title or
disc name and 5 characters for a station name, but
the actual number of characters displayed in
menus such as the Title List will vary.
• Press </, to move between the setting
buttons. To move between the setting
buttons, character palette, and character type
box on the display, press M/m.
• To move the cursor to the left or right within
the input row, select [b] or [B] and press
ENTER.
• To erase a character, move the cursor to the
right of the character in the input row. Select
[Erase] and press ENTER.
1
4
7
2
5
8
0
3
6
9
Number
buttons
TITLE LIST
5 Move to the character type box and press
</, to select a character type.
You can select [English/Latin Capital],
[English/Latin Lowercase], or [Symbol].
</M/m/,,
ENTER
The character palette switches according to
the character type you select.
6 Move to the character palette, press </
M/m/, to select the character, and press
ENTER.
1 Press TITLE LIST to turn on the Title List.
The selected character appears in the input
row.
2 Select a title and press ENTER.
The sub-menu appears.
A
• For DVD-RWs (Video mode) and DVD-Rs,
select [Title] and press ENTER. The display
for entering characters in step 4 appears.
Follow steps 4 to 8 below.
Language
English/Latin Capital
1
A
K
U
2
B
L
V
3
C
4
D
N
X
5
E
O
Y
6
F
P
Z
7
8
H
R
9
I
0
J
T
G
Q
M
W
S
3 Select [Edit] and press ENTER.
Edit options for the selected title appear.
Space
Erase
OK Cancel
• To enter a letter with an accent mark, select
the letter followed by an accent.
Example: Select “a” and then “ ` ” to enter
“à.”
• To insert a space, select [Space] and press
ENTER.
,continued
33
Download from Www.Somanuals.com. All Manuals Search And Download.
• To insert a character, move the cursor to the
right of the position where you want to insert
the character. Select the character from the
character palette and press ENTER.
Labelling and Protecting a
Disc
7 Repeat steps 5 and 6 to enter the
remaining characters.
ABC
1
4
7
2
5
8
0
3
6
9
Language
English/Latin Capital
1
A
K
U
2
B
L
V
3
C
4
D
N
X
5
E
O
Y
6
F
P
Z
7
8
H
R
9
I
0
J
T
G
Q
M
W
S
SYSTEM
MENU
Space
Erase
OK Cancel
</M/m/,,
ENTER
• If you want to return to the Title List without
renaming the title, select [Cancel] and press
ENTER.
8 Select [OK] and press ENTER.
To use the number buttons
You can also use the number buttons to enter
characters.
Labelling a disc
1
Select the row containing the character to be
input and press a number button.
+
RW
-
-
+
-
R
RWVR RWVideo
R
Example: To input “MT”
A disc is automatically labelled as its disc type.
You can change the disc name (up to 21 characters).
Select the “K, L, M, N, O, P, Q, R, S, T” row.
Press the number 3 button, followed by the
number 0 button.
1 Insert a disc.
2 Press SYSTEM MENU to turn on the System
2
Select [OK] and press ENTER.
Menu.
3 Select [Setup] and press ENTER.
The Setup display appears.
4 Select
[Disc] and press ,.
5 Select [Input Disc Name] and press ,.
Format DVD
Finalize
Input Disc Name
Protect Disc
PBC
Edit
DivX
34
Download from Www.Somanuals.com. All Manuals Search And Download.
6 While [Edit] is selected, press ENTER.
The display for entering characters appears.
Playing a DVD on Other
Equipment (Finalise)
b Note
+
-
-
+
-
R
RWVR RWVideo
RW
R
Label the disc before you finalise it. Once a disc is
finalised, you cannot change the disc name.
Finalising is necessary when you play discs
recorded with this recorder on other DVD
equipment.
When you finalise a DVD+RW, DVD-RW (Video
mode), DVD+R, or DVD-R, a DVD menu will be
automatically created, which can be displayed on
other DVD equipment.
Protecting a disc
-
RWVR
You can protect all titles on the disc to prevent
accidental recording, editing, or erasing.
Before finalising, check the differences between
the disc types in the table below.
1 Insert a disc.
Differences between the disc types
2 Press SYSTEM MENU to turn on the System
Menu.
Discs are automatically finalised when
removed from the recorder. However,
you may need to finalise the disc for
certain DVD equipment, or if the
+
RW
3 Select [Setup] and press ENTER.
The Setup display appears.
recording time is short. You can edit or
record on the disc even after finalising.
4 Select
[Disc] and press ,.
5 Select [Protect Disc] and press ,.
Finalising is necessary when playing on
any equipment other than this recorder.
Playable only on VR mode compatible
players. After finalising, you cannot edit
or record on the disc. If you want to edit
or record on it again, unfinalise the disc.
-
RWVR
Format DVD
Finalize
Input Disc Name
Protect Disc
PBC
Off
On
Finalising is necessary when playing on
any equipment other than this recorder.
After finalising, you cannot edit or
-
DivX
RWVideo
record on the disc. If you want to edit or
record on it again, unfinalise the disc.
6 Select [On] and press ENTER.
Finalising is necessary when playing on
any equipment other than this recorder.
After finalising, you cannot edit or
record on the disc.
+
R
-
R
To cancel the protection
Repeat the steps above, and select [Off] and press
ENTER in step 6.
z Hint
,continued
35
Download from Www.Somanuals.com. All Manuals Search And Download.
z Hint
You can check whether the disc has been finalised or not.
If you cannot select [Finalize] in step 6 above, the disc
has already been finalised.
1
4
7
2
5
8
0
3
6
9
b Notes
• The time required for finalising depends on the disc
type, recording time, or the number of titles recorded
on the disc.
SYSTEM
MENU
• Depending on the condition of the disc, recording, or
the DVD equipment, discs may not play even if the
discs are finalised.
• The recorder may not be able to finalise the disc if it
was recorded on another recorder.
</M/m/,,
ENTER
• If the recording time is short, the disc may not be
playable on some DVD players.
1 Insert a disc.
2 Press SYSTEM MENU to turn on the System
Menu.
3 Select [Setup] and press ENTER.
The Setup display appears
4 Select
[Disc] and press ,.
5 Select [Finalize] and press ,.
Format DVD
Finalize
Finalize
Input Disc Name
Protect Disc
PBC
Unfinalize
DivX
6 Select [Finalize] and press ENTER.
The display asks for confirmation.
7 Select [OK] and press ENTER.
The recorder starts finalising the disc.
Approximate remaining time for finalising
appears on the screen. Some discs may require
more time than is indicated.
8 Press ENTER when [OK] appears.
To unfinalise a DVD-RW
If you cannot record or edit on a DVD-RW that
has been finalised (a message appears), unfinalise
the disc by selecting [Unfinalize] in step 6 above.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
b Notes
• Situations below may cause slight inaccuracies with
the recording time.
Recording
– Recording a programme with poor reception, or a
programme or video source of low picture quality.
– Recording on a disc that has already been edited.
– Recording only a still picture or just sound.
• The available remaining recording time displayed is an
estimate and the actual time may differ.
• When recording in ULP mode, the maximum
continuous recording time is 720 minutes.
Before Recording
Before you start recording…
• This recorder can record on various discs. Select
• Use the Title List to check the available
DVD+RWs and DVD-RWs, you can erase titles
Recording stereo and bilingual
programmes
z Hints
This recorder can receive and record stereo and
bilingual programmes based on the ZWEITON
system or the NICAM system.
• Up to 49 titles can be recorded on a DVD+RW or
DVD+R. For other recordable discs, 99 titles.
• When using a DVD+RW, you can overwrite a
For DVD-RWs (Video mode)/DVD-Rs, press
AUDIO repeatedly to select the audio channel
(Main+Sub, Main, or Sub) before recording. The
selected channel is displayed on the TV screen and
applied to the recording. For DVD+RWs/DVD-
RWs (VR mode)/DVD+Rs, “Main+Sub” is
automatically selected. Note that you cannot
switch the audio channel while recording.
Recording mode
Like the SP or LP recording mode of VCRs, this
recorder has five different recording modes.
Select a recording mode according to the time and
picture quality you need. For example, if picture
quality is your top priority, select the High Quality
mode (HQ). If recording time is your priority,
Ultra Long Play mode (ULP) can be a possible
choice.
ZWEITON (German stereo) system
When a stereo or bilingual ZWEITON based
programme is received, [STEREO] or
[BILINGUAL] appears on you TV screen.
Press REC MODE repeatedly to switch the
recording modes.
Note that the recording time in the following table
is an approximate guide.
NICAM system
When a stereo or bilingual NICAM based
programme is received, [N](NICAM) appears on
the screen.
To record a NICAM programme, be sure to set
[NICAM/Standard] of [Manual CH Setting] in the
[General] setup to [On] (default). If the sound is
not clear when listening to NICAM broadcasts, set
[NICAM/Standard] to [Off]. (For details, see
Recording mode
Recording time
(minute)
HQ (High quality)
SP (Standard mode)
LP
60
R
r
120
240
360
840
z Hint
When playing on other DVD equipment, you may not be
able to switch between the main and sub sounds for
bilingual programmes. Select either “Main” or “Sub”
before you start recording if you plan to play a DVD-RW
(Video mode)/DVD-R on other DVD equipment.
EP
ULP (Long duration)
,continued
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Unrecordable pictures
Timer Recording
Pictures with copy protection cannot be recorded
on this recorder.
+
RW
-
-
+
R
-
R
RWVR RWVideo
When the recorder receives a copy guard signal,
the recorder stops recording.
You can set the timer for a total of 16 programmes,
up to one month in advance.
Copy control
signals
Recordable discs
b Note
While recording, you cannot set additional timer
recordings.
Copy-Free
Copy-Once
Copy-Never
+
RW
-
-
RWVR RWVideo
+
R
-
R
Z
'/1
1
4
7
2
5
8
0
3
6
9
-
RWVR
Ver.1.1, Ver.1.2 with
CPRM*
None
* The recorded disc can be played only on CPRM
compatible equipment.
TIMER
</M/m/,,
ENTER
b Note
Even if you erase a scene that contains a copy protection
signal, the recording restrictions on that title are retained.
O RETURN
x REC STOP
1 Press Z (open/close), and place a
recordable disc on the disc tray.
Labelled side facing up
2 Press Z (open/close) to close the disc
tray.
Wait until “REAd” disappears from the front
panel display.
For details on how to insert and format a new
3 Press TIMER.
The Timer List appears.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Press x REC STOP. Press ENTER before the
confirmation message turns off. Note that it may
take a few seconds for the recorder to stop
recording.
4 Select [NEW] and press ENTER.
The Timer Record menu appears.
Timer Record
100 min Remain
PR
Date
Start
Stop
Mode
SP
12
12/10 Sun
19:20
19:50
Rec Mode Adjust
If there is not enough available disc space for the
recording, the recorder automatically selects the
recording mode that will record the entire
programme. To use this function, select [AT] for
the recording mode.
5 Press </, to select an item and press
M/m to adjust the setting.
[PR]: Selects the programme position or input
source.
[Date]: Sets the date up to one month in
advance.
[Start]: Sets the start time.
If the timer settings overlap
If the timer settings overlap, [Duplicate Date] will
appear in the Timer List. For details, see “When
[Stop]: Sets the stop time.
[Mode]: Selects the recording mode
(page 37). If you select [AT], you can use the
Rec Mode Adjust function. See “Rec Mode
• If you make a mistake, select the item and
change the setting.
To confirm, change, or cancel timer recording
z Hint
You can play the recorded programme by selecting the
programme title in the Title List menu.
6 Press ENTER.
The Timer List appears with the timer setting
you made.
b Notes
• Check that the clock is correctly set before setting the
timer recording. If not, the timer recording cannot be
made.
Timer List
1/2
PR
Date
Start
Length
NEW
30min
Mode
SP
Check
• Even if the timer is set for the same daily or weekly
programme, the timer recording cannot be made if it
overlaps with a programme that has priority. [Duplicate
Date] will appear for the overlapped setting in the
Timer List. Check the priority order of the settings
12
12/10 Sun
19:20
Rec. OK
• Even if the timer is set, timer recordings cannot be
made while recording a programme that has priority.
• The Rec Mode Adjust function only works with a timer
recording. It does not function with Quick Timer
To make another timer setting, select [NEW]
and press ENTER. Repeat steps 5 and 6.
7 Press O RETURN to turn off the Timer
• If “
” flashes on the front panel display, check that
List.
“
a recordable disc is inserted correctly and available
recording time on the disc is enough.
” lights up on the front panel display and
the recorder is ready to start recording.
There is no need to turn off the recorder before
the timer recording starts.
• To record a satellite programme, turn on the
satellite tuner and select the satellite
programme you want to record. Leave the
satellite tuner turned on until the recorder
finishes recording.
To stop recording during timer recording
Switch the input selector on your TV so that the
confirmation appears on the TV screen.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Select a timer setting and press ENTER.
The Timer Record menu in step 4 of “Timer
Checking/Changing/
Cancelling Timer Settings
(Timer List)
The programme position, date, start and stop
times, and recording mode for the selected
timer setting appear.
3 Press </, to select an item and press
+
-
-
+
-
R
RWVR RWVideo
RW
R
M/m to change the setting.
You can check, change, or cancel timer settings
using the Timer List menu.
• If you want to return to the Timer List
without changing, press TIMER.
4 Press ENTER.
The information for the selected timer setting
is updated.
1
4
7
2
5
8
0
3
6
9
CLEAR
TIMER
Cancelling the timer settings
1 After step 1 above, select a timer setting
and press CLEAR.
The display asks for confirmation.
</M/m/,,
ENTER
2 Select [OK] and press ENTER.
The selected timer setting is deleted from the
Timer List.
O RETURN
• If you want to cancel the deletion, select
[Cancel] and press ENTER in step 2.
Changing the timer settings
To turn off the Timer List
Press O RETURN.
The Timer List can contain up to 16 timer settings.
You can select a timer setting and modify it before
the recording starts.
When the timer settings overlap
If a timer setting overlaps with another timer
setting (i.e., [Duplicate Date] appears in the Timer
List), the programme that starts first has priority
and the second programme starts recording only
after the first programme has finished.
1 Press TIMER to turn on the Timer List.
All the timer settings are listed. You can check
information such as the recording date, time,
recording mode, etc.
7:00
8:00
9:00
10:00
Timer List
A
1/2
PR
Date
Start
Length
NEW
Mode
Check
will be cut off
B
12
12
10
12/10 Sun
13/10 Mon
13/10 Mon
19:20
20:00
20:15
30min
30min
15min
SP
SP
SP
Rec. OK
Duplicate Date
Duplicate Date
◆When the recordings start at the same time
The programme that is set first has priority. In this
example, timer setting A is set after B, so the first
part of timer setting A will not be recorded.
• [Rec. OK] indicates that the timer recording
will be made as you set. If the timer settings
overlap, [Duplicate Date] will appear.
7:00
8:00
A
9:00
10:00
B
40
Download from Www.Somanuals.com. All Manuals Search And Download.
◆When the end time of one recording and the
start time of another are the same
After finishing the previous recording, the other
recording may be delayed.
Recording Without the
Timer
7:00
8:00
A
9:00
10:00
+
RW
-
-
+
R
-
R
RWVR RWVideo
B
1
4
7
2
3
b Notes
PROG +/–
5
8
0
6
9
• While recording, you cannot change the timer setting
for the current recording.
INPUT
• Even if the timer is set, timer recordings cannot be
made while recording a programme that has priority.
• Even if the timer is set for the same daily or weekly
programme, the timer recording cannot be made if it
overlaps with a programme that has priority. [Duplicate
Date] will appear for the overlapped setting in the
Timer List. Check the priority order of the settings.
TV/DVD
TITLE LIST
</M/m/,,
ENTER
DISPLAY
X PAUSE
z REC
REC MODE
x REC STOP
TV t (input
select)
1 Insert a recordable disc.
2 Press PROG +/– or INPUT to select the
programme position or input source you
want to record.
3 Press REC MODE repeatedly to select the
recording mode.
Each time you press the button, the display
changes on the TV screen as follows:
HQ
SP
LP
EP
ULP
For details about the recording mode, see
4 Press z REC.
Recording starts and “REC” (red) appears in
the front panel display.
Recording continues until you stop the
recording or the disc is full.
,continued
41
Download from Www.Somanuals.com. All Manuals Search And Download.
To stop recording
Press x REC STOP. Note that it may take a few
seconds for recording to stop.
To check the Quick Timer
Press z REC once while recording. The
remaining recording time and other recording
information (programme position, recording
mode, etc.) appear momentarily on the TV screen.
To pause recording
Press X PAUSE. To restart recording, press the
button again.
To cancel or stop the Quick Timer
To return the recorder to normal recording mode,
press z REC repeatedly while recording.
[Continue] appears momentarily on the TV
screen.
To watch another TV programme while
recording
If your TV is connected to the LINE 1-TV jack, set
your TV to the TV input using the TV/DVD
button and select the programme you want to
watch. If your TV is connected to the
COMPONENT VIDEO OUT jacks, set the TV to
TV input using the TV t button and select the
To stop recording, press x REC STOP. Note that
it may take a few seconds for recording to stop.
To extend the Quick Timer
Press z REC repeatedly while recording. After
the recorder returns to normal recording mode, the
recording time extends by 10 minutes (up to the
capacity of the disc).
z Hint
If you do not want to watch TV while recording, you can
turn off the TV. When using a decoder, make sure to
leave it on.
Checking status while recording
b Notes
You can check recording information such as
recording time or recording mode, etc.
• After pressing z REC, it may take a short while to start
recording.
• You cannot change the recording mode while
recording or during recording pause.
• If there is a power failure, the programme you are
recording may be erased.
Press DISPLAY during recording.
Recording information appears on the TV screen.
• You cannot watch a PAY-TV/Canal Plus programme
while recording another PAY-TV/Canal Plus
programme.
00:19:55
Continue
DVD
Using the Quick Timer function
12/10/2008
19 : 20
Input : PR12
MONO
SP Remain 1H40M
You can set the recorder to record in 10-minute
increments.
Press z REC repeatedly to set the duration.
Recording starts after the first press. The Quick
Timer starts from the third press, and then each
additional press increases the recording time by 10
minutes within the available free space on the disc.
A Recording mode
B Available recording time for the disc
C Recording status bar
Continue
10M
20M
30M
D Audio channel
E Programme position or input source
F Current date/time
The remaining recording time appears
momentarily on the TV screen.
The time counter in the front panel display
decreases to 0:00 (or when the disc is full), then
the recorder stops recording (power turns off).
G Elapsed recording time
Press DISPLAY to turn off the display.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating chapters in a title
Recording From Connected
Equipment
The recorder automatically divides a recording (a
title) into chapters by inserting chapter marks at 5
or 10-minute intervals during recording. Select the
interval, [5 minutes] or [10 minutes] for [Auto
+
RW
-
-
+
R
-
R
RWVR RWVideo
You can record from a connected VCR or similar
device. To connect a VCR or similar device, see
Use the DV IN jack on the front panel if the
equipment has a DV output jack (i.LINK jack).
z Hints
• You can create chapters manually when playing a
DVD+RW, DVD-RW (VR mode), or DVD+R
• When recording in ULP mode, chapter marks are
inserted at 10-minute intervals.
1
4
7
2
5
8
0
3
6
9
Overwriting a recorded title
INPUT
+
RW
You can use the Title List to make a new recording
over a title previously recorded on the disc. For
1 Insert a DVD+RW.
2 Press PROG +/– or INPUT to select a
programme position or input source.
3 Press TITLE LIST to turn on the Title List.
z REC
x REC STOP
REC MODE
4 Press </M/m/, to select the title you
want to overwrite.
5 Press z REC.
Recording starts.
1 Insert a recordable disc.
2 Press INPUT to select an input source
according to the connection you made.
The front panel display changes as follows:
To stop recording
Press x REC STOP. Note that it may take a few
seconds for recording to stop.
Programme
position
L1
L2
z Hint
If you erase a title from a DVD+RW, it appears as [Erase]
in the Title List. This will not increase the remaining time
on the disc. However, the remaining time will be
increased when erasing the last title. You can select
[Erase] from the Title List and make a new recording on
dV
L3
3 Press REC MODE repeatedly to select the
recording mode.
The recording mode changes as follows:
HQ
SP
LP
EP
ULP
b Notes
• If the selected title is shorter than the new recording, or
less than ten seconds, the recorder automatically
overwrites the next title in the Title List. If you do not
4 Insert the source tape into the connected
equipment and set to playback pause.
,continued
43
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Press z REC on this recorder and the
pause or play button on the connected
equipment at the same time.
Recording starts.
To stop recording, press x REC STOP on this
recorder.
If you connect a digital video camera with a DV
IN jack
of how to record from the DV IN jack.
b Notes
• When recording a video game image, the screen may
not be clear.
• Any programme that contains a Copy-Never copy
guard signal cannot be recorded. The recorder
automatically stops recording after a few seconds.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Press TITLE LIST.
For details about the Title List, see “Viewing
Playback
Playing
Example: DVD-RW (VR mode)
+
-
-
+
-
R
RWVR RWVideo
RW
R
DVD
Title List Original
1/7
0:15:00
0:25:00
VCD DATA DVD DATA CD
DVD-VR
2hour 45min
SP Remain
To play from the connected USB memory, see
page 46. To play MP3 audio tracks or JPEG image
Title 1
07/12
Title 2
0:45:00 09/12
Title 3
1:00:00 10/12
Title 4
13/12
Title 5
0:10:00 16/12
Title 6
0:10:00 19/12
Z
1
4
7
2
5
8
0
3
6
9
4 Select a title, and press ENTER.
Number
buttons
The sub-menu appears.
5 Select [Play], and press ENTER.
Playback starts from the selected title on the
disc.
TOP MENU/
TITLE LIST
SYSTEM
MENU
MENU
</M/m/,,
ENTER
z Hints
• You can also use the H button to start playback.
Playback starts automatically depending on the disc.
• To play a title including hidden chapters on a
DVD+RW/DVD+R, select [Full Play] in step 5. For
H
x
To select a chapter from the Chapter List
(DVD+RW, DVD-RW, DVD+R, and DVD-R only)
1 Press Z (open/close), and place a disc on
the disc tray.
1
Select [Search] from the sub-menu in step 5
above and press ,.
2
Select [Chapter] and press ENTER.
The Chapter List of the selected title appears.
For details about the Chapter List, see
3
4
Select the chapter you want to play and press
ENTER.
The sub-menu appears.
Playback side facing down
2 Press Z (open/close) to close the disc
tray.
Select [Play] and press ENTER.
Playback starts from the selected chapter.
The disc’s menu may appear when a DVD
VIDEO or VIDEO CD was inserted.
Select the title or chapter you want to play
using </M/m/,, etc, for DVDs; number
buttons for VIDEO CDs.
To use the DVD’s Menu
When you play a DVD VIDEO, or a finalised
DVD+RW, DVD-RW (Video mode), DVD+R, or
DVD-R, you can display the disc’s menu by
pressing TOP MENU or MENU.
,continued
45
Download from Www.Somanuals.com. All Manuals Search And Download.
– you change the settings on the recorder.
– you make a recording.
– you disconnect the mains lead (the power cord).
To play VIDEO CDs with PBC functions
PBC (Playback Control) allows you to play
VIDEO CDs interactively using the menu on your
TV screen.
When you start playing a VIDEO CD with PBC
functions, the menu appears.
Select an item using the number buttons and press
ENTER. Then, follow the instructions in the menu
(press H when [Press SELECT] appears).
z Hint
For DVD VIDEOs, the recorder stores the stop point
even if you open the disc tray or turn off the recorder.
To play restricted DVDs (Parental Control)
If you play a restricted DVD, the message
[Playback limited by Parental Control.] and the
display for entering your password appear on the
TV screen. Enter your four-digit password using
the number buttons. The recorder starts playback.
z Hint
To play without PBC functions, set [PBC] to [Off] in the
continuous play mode only.
b Note
To register or change the password, see “Parental
For a Super VCD, you cannot set [PBC] to [Off] in the
To play DivX video files
Playing from the USB memory
When you insert a DATA CD/DATA DVD
containing DivX video files, the Movie List
display appears. Select a file and press ENTER.
Select [Play] from the sub menu, and press
ENTER. For details about DivX video files, see
You can play DivX video files, JPEG image files,
or MP3 audio tracks in the inserted USB memory.
1 Insert a USB memory in the USB jack on
2 Press SYSTEM MENU to turn on the System
Menu.
z Hints
• If the Photo Album or Music Jukebox display appears,
press TITLE LIST repeatedly to switch the lists.
• If you press O RETURN, playback stops and the list
menu disappears. To turn on the list menu again, press
TITLE LIST.
3 Select [Media] and press ENTER.
4 Select [Video (DivX)], [Photo], or [Music],
and press ENTER.
To stop playback
5 Select [USB] and press ENTER.
The Movie List, Photo Album, or Music
Jukebox display appears.
Press x.
To resume playback from the point where you
stopped the disc (Resume Play)
The recorder stores the point where you stopped
the disc.
Press x once to stop playback. When you play the
disc next time, the recorder resumes playback
from the point where you stopped the disc.
To start from the beginning, press x twice.
Playback starts from the beginning of the title/
track/scene.
6 Select a track or file and press ENTER.
7 Select [Play] for movies and music; [Full
Screen] for photos, and press ENTER.
For details about the Music Jukebox or Photo
b Note
Do not remove the USB memory during this operation.
Stop playback and turn off the list menu beforehand.
The point where you stopped playing is cleared
when:
– you open the disc tray.
– you turn off the recorder.
– you play another title.
– you switch the Title List to Original or Playlist.
– you edit the title after stopping playback.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback options
Z
1
4
7
2
5
8
0
3
6
9
AUDIO
SUBTITLE
ANGLE
CLEAR
ZOOM
PLAY MODE
</M/m/,,
ENTER
c/C
./>
H
x
m
/
M
X
Buttons
Operations
Discs
Z (open/close)
X (pause)
Stops playing and opens the disc tray.
Pauses playback.
All discs
All discs
All discs
. (previous)/
> (next)
Goes to the beginning of the current or next title/
chapter/scene/track.
Fast reverses/fast forwards the disc when repeatedly
pressed during playback.
All discs
(fast reverse/fast
forward)
1
* not available for
Search speed changes as follows:
Fast forward
M1 t M2 t M3 t M4* t M5* *
VIDEO CDs.
* not available for
1
1
2
2
DivX video files.
Fast reverse
n (reverse play) t m1 t m2 t m3 t
1
1
2
m4* t m5* *
,continued
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Buttons
Operations
Discs
Plays in slow motion when pressed repeatedly in
pause mode.
Playback speed changes as follows:
+
-
-
RWVR RWVideo
RW
(slow)
+
-
R
R
DVD
VCD
Forward slow
3
1 t
Reverse slow*
1 t 2 t
2 t
3 t
4*
4
3
3
* not available for
VIDEO CDs.
3 t
Replays the scene/briefly fast forwards the scene when
pressed during playback.
-
-
+
RWVideo
RWVR
RW
(instant replay/instant
advance)
+
-
R
R
DVD
DATA DVD DATA CD
Plays one frame at a time when pressed in pause mode
(not available for DVD+R DL discs).
-
-
+
RWVideo
RWVR
RW
(freeze frame)
AUDIO
+
-
R
R
DVD
DATA DVD DATA CD
Selects one of the audio tracks recorded on the disc
when pressed repeatedly.
All discs
: Selects the language.
DVD DATA DVD DATA CD
:
+
RW
-
-
+
R
-
R
RWVR RWVideo
VCD
Selects one of the recorded audio tracks.
SUBTITLE
ANGLE
Selects a subtitle language when pressed.
DVD DATA DVD DATA CD
Selects an angle when pressed repeatedly.
DVD
“
” appears briefly at the scene where the angle to
be changed.
If various angles (multi-angles) for a scene are
recorded on the disc, “
display.
” appears in the front panel
To resume normal playback, press H.
b Notes
• If “ ” appears, the operation is not available on the
disc.
• When playing the discs recorded on this recorder,
angles and subtitles cannot be changed.
• For a Super VCD, you cannot select audio track 2 if one
is recorded on the disc.
2
• The angle function is not available for DivX video files.
• If DivX subtitle does not display properly, press
X
when
the subtitle appears. Then hold down SUBTITLE for
about 3 seconds to display the language code menu. Press
You can move the image using </M/m/,.
To resume normal playback, press CLEAR.
<
/
,
to change the language code until the subtitle is
displayed properly. Press to continue playback.
H
b Notes
• The zoom function may not work depending on the
disc.
To enlarge a video image (Zoom)
Press ZOOM repeatedly during playback or pause
mode.
• The zoom function is not available for VIDEO CDs
and DivX video files.
Magnification changes as follows:
×1t ×2 t ×4
R
48
Download from Www.Somanuals.com. All Manuals Search And Download.
To play repeatedly
Press PLAY MODE repeatedly to select an item to
be repeated.
[Chapter]: repeats the current chapter. (DVD only)
[Title]: repeats the current title. (DVD only)
[Track]: repeats the current track. (VIDEO CD
only)
Searching for a Title/
Chapter/Track, etc.
+
RW
-
-
+
R
-
R
RWVR RWVideo
DVD
VCD DATA DVD DATA CD
[All]: repeats all the tracks on the disc. (DVD-RW
(VR mode)/VIDEO CD only)
[Off]: does not play repeatedly.
You can start playing from the exact title, chapter,
or the point you like.
b Notes
• For a VIDEO CD with PBC function, set [PBC] to
1
4
7
2
5
8
0
3
6
9
• If you press x, or
(instant replay) during Repeat
Number
buttons
Play, Repeat Play is cancelled.
• Repeat Play is not available for DivX video files.
CLEAR
To repeat a specific portion (A-B Repeat)
You can play a specific portion of a title, chapter,
or track repeatedly.
MARKER
</M/m/,,
1
During playback, when you find the starting
point (point A) of the portion to be repeated,
press PLAY MODE.
ENTER
O RETURN
DISPLAY
[A-] appears on the TV screen.
SEARCH
2
When you reach the ending point (point B),
press ENTER.
1 Press DISPLAY twice during playback.
[A-B] appears and the recorder starts
repeating this specific portion.
To return to normal playback, press PLAY
MODE repeatedly to select [Off].
DVD
DVD
1/1
1/23
0:00:30
D5.1CH
1.ENG
b Notes
• A-B Repeat Play may not work properly with some
Super VCDs.
1 ENG
1/1
Normal
• A-B Repeat Play is not available for DivX video files.
Titles
Note on playing DTS sound tracks on a CD
• When playing DTS-encoded CDs, excessive noise will
be heard from the LINE 1-TV, LINE 3/DECODER, or
AUDIO OUT (L/R) jacks. To avoid possible damage to
the audio system, the user should take proper
precautions when the LINE 1-TV, LINE 3/DECODER,
or AUDIO OUT (L/R) jacks of the recorder are
connected to an amplification system. To enjoy DTS
Digital Surround™ playback, an external DTS decoder
system must be connected to the DIGITAL OUT
(COAXIAL) jack of the recorder.
2 Select a search item, and press ENTER.
• Title (for DVDs)
• Chapter (for DVDs except for DivX video
files)
• Track (for VIDEO CDs with PBC function
off)
• Time: Searches for the starting point of
entered time code (not available for DVD+R
DL discs)
• Set the sound to “Stereo” using the AUDIO button
3 Press the number buttons to select the
number of the title, chapter, time code,
etc., you want.
Notes on playing DVDs with a DTS sound track
DTS audio signals are output only through the DIGITAL
OUT (COAXIAL) jack.
For example: Time search
To find a scene at 2 hours, 10 minutes, and 20
seconds, enter “21020” and press ENTER.
When you play a DVD with DTS sound tracks, set [DTS
,continued
49
Download from Www.Somanuals.com. All Manuals Search And Download.
If you enter the wrong number, press </,
to select the number you want to cancel, then
enter another number.
Playing Music CDs and MP3
Audio Tracks
The recorder starts playback from the selected
number or scene.
CD DATA DVD DATA CD
The recorder can play music CDs and MP3 audio
tracks on DATA CDs/DATA DVDs and USB
memory. For details about MP3 audio tracks, see
z Hint
You can search for a specific point of the title using the
To play from the USB memory, see page 46.
Marking a favourite scene
You can have the recorder store specific portions
of the disc in memory and play immediately
whenever you want. Up to six markings can be set.
1
4
7
2
5
8
0
3
6
9
To mark a scene
During playback, press MARKER when you find
a scene you want to mark.
TITLE LIST
The marker number appears on the TV screen.
</M/m/,,
ENTER
To search for the marked scene
O RETURN
H
1
Press SEARCH.
The marker search display appears.
x
Marker Search
1 Insert a disc.
The Music Jukebox display appears on the TV
screen.
Example: DATA CDs
Music Jukebox
ROOT
9 Total
CD
ROCK BEST HIT
KARAOKE
MY FAVOURITE SONG
R&B
2
3
Press </M/m/, to select the desired scene
and press ENTER.
Playback starts from the marked scene you
selected.
00:00:00
STEREO
JAZZ
CLASSIC
SALSA OF CUBA
BOSSA NOVA
0001.mps
Press O RETURN to turn off the display.
To erase the markings
• If the Photo Album or Movie List appears,
press TITLE LIST repeatedly to switch the
lists.
1
Press SEARCH to turn on the marker search
display.
• Some CDs automatically start playing from
the beginning. When selecting a track, go to
step 4.
• To play tracks listed on this layer, select the
track and press H.
2
Press </M/m/, to select the marked scene,
and press CLEAR.
The display asks for confirmation.
3
4
Select [OK] and press ENTER.
Press O RETURN to turn off the display.
2 Select an album and press ENTER.
The sub-menu appears.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Select [Open] and press ENTER.
The track list appears.
Playback options
To return to the album list, select [
press ENTER.
] and
4 Select a track and press ENTER.
Z
The sub-menu appears.
1
4
7
2
5
8
0
3
6
9
5 Select [Play] and press ENTER.
Playback starts from the selected track.
• If you select [Random], you can play the
tracks on the disc randomly.
AUDIO
PLAY MODE
To stop playback
Press x.
./>
H
When you start playback the next time, the
recorder resumes playback from the point where
you stopped the track.
m/M
Press x twice to play from the beginning of the
disc/track.
X
z Hints
• For CDs, you can also select the track number by
pressing the number buttons in step 4 above.
• Press M/m to go to the next/previous page of the list.
• If you press O RETURN, playback stops and the list
menu disappears. To turn on the list menu again, press
TITLE LIST.
Buttons
Operations
Z (open/
close)
Stops playing and opens the
disc tray.
• Press DISPLAY to show detailed information for the
selected track.
X (pause)
Pauses playback.
Note on playing DTS sound tracks on a CD
• When playing DTS-encoded CDs, excessive noise will
be heard from the LINE 1-TV, LINE 3/DECODER, or
AUDIO OUT (L/R) jacks. To avoid possible damage to
the audio system, the user should take proper
./>
(previous/
next)
Goes to the beginning of the
current or next track.
precautions when the LINE 1-TV, LINE 3/DECODER,
or AUDIO OUT (L/R) jacks of the recorder are
connected to an amplification system. To enjoy DTS
Digital Surround™ playback, an external DTS decoder
system must be connected to the DIGITAL OUT
(COAXIAL) jack of the recorder.
m/M
Fast reverses/fast forwards the
disc when repeatedly pressed
during playback.
Search speed changes as
follows:
Fast forward
M t M1 t M2
Fast reverse
(fast reverse/
fast forward)
(not available
for DATA
CDs/DATA
DVDs)
• Set the sound to “Stereo” using the AUDIO button
m t m1 t m2
Notes on playing DVDs with a DTS sound track
DTS audio signals are output only through the DIGITAL
OUT (COAXIAL) jack.
AUDIO
Selects the audio track on the
disc when pressed repeatedly.
When you play a DVD with DTS sound tracks, set [DTS
To resume normal playback, press H.
,continued
51
Download from Www.Somanuals.com. All Manuals Search And Download.
To play repeatedly
Press PLAY MODE repeatedly to select an item to
be repeated.
[Track]: repeats the current track.
[Folder]: repeats the current folder (DATA CD/
DATA DVD only).
Playing JPEG Image Files
DATA DVD DATA CD
You can play JPEG image files on DATA CDs/
DATA DVDs and USB memory. For details about
[All]: repeats all the tracks on the disc (CD only).
[Off]: does not play repeatedly.
To play from the USB memory, see page 46.
To repeat a specific portion (A-B Repeat)
You can play a specific portion of a (CDs only)
track repeatedly.
1
4
7
2
5
8
0
3
6
9
1
During playback, when you find the starting
point (point A) of the portion to be repeated,
press PLAY MODE.
[A-] appears on the TV screen.
TITLE LIST
2
When you reach the ending point (point B),
press ENTER.
[A-B] appears and the recorder starts
repeating this specific portion.
</M/m/,,
ENTER
To return to normal playback, press PLAY
MODE repeatedly to select [Off].
O RETURN
./>
H
x
X
1 Insert a disc.
The Photo Album appears on the TV screen.
Photo Album
/
CD
• If the Music Jukebox or Movie List appears,
press TITLE LIST repeatedly to switch the
lists.
• To view a photo listed on this layer, select
the file and press H.
2 Select a folder, and press ENTER.
The sub-menu appears.
3 Select [Open] and press ENTER.
The file list appears.
To return to the folder list, select [
press ENTER.
] and
52
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Select the file you want to view and press
ENTER.
The sub-menu appears.
To start a slide show, select [Slide Show] and
press ENTER.
5 Select [Full Screen] and press ENTER.
The selected image is displayed full screen.
To rotate a image
Press M/m while viewing the image. Each press
rotates the image clockwise or counterclockwise
by 90 degrees.
To view the previous or next image
Press ./> or </,.
To return to the list menu
Press x.
z Hints
• Press M/m to go to the next/previous page of the list.
• Press O RETURN to turn off the list menu. To turn on
the list menu, press TITLE LIST.
• Press ENTER or DISPLAY to turn on/off the button
guide at the bottom of the screen.
Enjoying a slide show
ENTER.
A pop-up menu appears.
[Object] – [All] (fixed setting): Plays all photo
files on the folder.
[Speed]: Select from [Normal], [Fast], and
[Slow] by pressing </,.
Slide Show
Object
Speed
All
Normal
Start
Cancel
2 Select [Start] and press ENTER.
Slide show starts from the selected image file.
• To pause playback, press X.
• To stop the slide show and return to the list
menu, press x or O RETURN.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
To free up disc space (DVD+RW/DVD-RW (VR
mode)/DVD-RW (Video mode) only)
You can utilize disc capacity by erasing Video
mode or original titles. The effect differs
depending on the disc type and location of the title,
as follows.
Erasing and Editing
Before Editing
This recorder offers various edit options for
various disc and title types. Before you edit, check
these types and select an available option.
Disc type
To open up disc space
DVD+RW
Erase the last title on the disc. You
can erase and overwrite titles other
than the last one; however, the
display will not show the resulting
capacity increase. Erased titles are
shown as deleted in the Title List
menu.
b Notes
• You may lose edited contents if you remove the disc
while editing.
• Finish editing and recording before finalising. No more
editing or recording can be made on a finalised disc.
• If a message appears and indicates that the disc’s
control information is full, erase unnecessary titles.
DVD-RW
(VR mode)
Erase original titles anywhere on
the disc.
DVD-RW
Erase the last title on the disc.
(Video mode)
Edits for Video mode titles/original
titles
DVD+R/
DVD-R
You cannot increase the disc
capacity, as they are non-
rewritable.
-
R
+
+
R
-
-
RW
RWVR RWVideo
b Note
For DVD+RWs and DVD-RWs (VR mode), the disc’s
available capacity may not display correctly. The
recorder displays only the available capacity after the last
title on the disc.
For Video mode titles on DVD+RWs/DVD-RWs
(Video mode)/DVD+Rs/ DVD-Rs, and original
titles on DVD-RWs (VR mode), the recorder edits
actual recordings on the disc. You cannot undo
any edits you make, and the original contents will
be consequently lost.
Edits for Playlist titles
z Hint
-
RWVR
When using a DVD-RW (VR mode), you can keep the
original contents by editing a Playlist (see “Edits for
Playlist titles” below).
For DVD-RWs (VR mode), you can edit a Playlist
while retaining original titles (actual recordings on
the disc). A Playlist is a group of Playlist titles
created from the original title for editing purposes.
When you create a Playlist, only the control
information necessary for playback, such as the
playback order, is stored on the disc. Since the
original titles are left unaltered, Playlist titles can
be re-edited.
Example: You have recorded the final few
matches of a football tournament on a DVD-RW
(VR mode). You want to create a digest with the
goal scenes and other highlights, but you also want
to keep the original recording.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
In this case, you can select a title or chapter and
create a Playlist title. You can even rearrange the
Erasing and Editing Titles
This section explains the basic edit functions
common to Video mode titles, original titles, and
Playlist titles.
Note that editing on Video mode and original titles
is irreversible as they are the actual recordings on
the disc. If you want to edit a DVD-RW (VR
mode) while retaining the original contents, create
z Hint
For DVD-RW (VR mode), you can display the
disc’s Playlist titles in Title List (Playlist), or the
original titles in Title List (Original). Press TITLE
LIST repeatedly to switch the two Title List
menus.
List of edit options
Select from the following options and refer to the
pages in parentheses. Title type and disc type that
the option can be applied are indicated in each
section.
1
4
7
2
5
8
0
3
6
9
TITLE LIST
</M/m/,,
ENTER
– Adding contents to an existing Playlist title
H
X
m/M
x
b Note
– Rearranging chapters within a Playlist title
If you edit an original title after creating a Playlist title,
the edits may affect the derived Playlist title.
b Note
When selecting a title for editing, always note the above
differences between the Video mode/original title edit
and Playlist title edit.
1 Press TITLE LIST to turn on the Title List.
The Title List menu appears and displays the
disc contents.
When editing a DVD-RW (VR mode), press
TITLE LIST repeatedly to switch the Title
List (Original) and Title List (Playlist), if
necessary.
Example: Title List (Original)
Title List Original
1/7
0:15:00
0:25:00
DVD-VR
2hour 45min
SP Remain
Title 1
07/12
Title 2
0:45:00 09/12
Title 3
1:00:00 10/12
Title 4
13/12
Title 5
0:10:00 16/12
Title 6
0:10:00 19/12
,continued
55
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Select a title, and press ENTER.
The sub-menu appears with options available
for the selected title.
Erasing a title
+
RW
+
-
R
-
-
RWVR RWVideo
R
[Search]: Displays the search options.
[Chapter]: Displays the Chapter List for
1 Select [Erase] in step 3 of “Erasing and
Editing Titles,” and press ENTER.
The display asks for confirmation.
[Protect]: Protects the title from erasure or
2 Select [OK], and press ENTER.
The title is erased.
[Edit]: Displays the following options.
[Title Name]: Allows you to label the
z Hints
• When you want to erase all titles, reformat the disc
• After erasing a title on a DVD+RW, the title name is
displayed as erased in the Title List menu. You can
[Divide]: Divides the title in two
[A-B Erase]: Erases a section of the title
[Hide/Show]: Hides the title/Shows the
Erasing a section of a title (A-B
Erase)
[Playlist]: Allows you to create a new Playlist
title, or add contents to an existing Playlist
-
RWVR
3 Select an edit option, and press ENTER.
The selected option is applied to the title. See
the pages in parentheses for the procedure.
1 Select [Edit] in step 3 of “Erasing and
Editing Titles,” and press ENTER.
2 Select [A-B Erase], and press ENTER.
The following display appears.
Labelling a title
+
+
R
-
R
-
-
RW
RWVR RWVideo
Edit
A-B Erase
1 Select [Edit] in step 3 of “Erasing and
Editing Titles,” and press ENTER.
For DVD-RWs (Video mode) and DVD-Rs,
select [Title] in step 1.
Title
1
07/12 0:45:00
Set Point A
Set Point B
Cancel
2 Select [Title Name], and press ENTER.
The display for entering characters appears.
Follow the explanations of “Changing the
00:00:00
OK
Current playback point
3 Press H, and search for the scene you
want to erase by pressing x, X, and m/
M.
z Hint
You can label or re-label DVDs (page 34).
56
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Press ENTER at the start of the scene to be
erased (point A).
Protecting a title from erasure or
alteration
Thumbnail of point A
+
RW
+
R
-
RWVR
Edit
A-B Erase
Title
1
Select [Protect] in step 3 of “Erasing and
Editing Titles,” and press ENTER.
The title is protected and [ ] (locked) appears in
the Title List menu.
To cancel the protection, repeat the steps above
and select [Unprotect].
07/12 0:45:00
Point
A
00:15:00
Set Point A
Set Point B
Cancel
00:15:00
OK
Dividing a title
5 Press H, and search for the scene you
want to erase by pressing x, X, and m/
M.
+
RW
1 Select [Edit] in step 3 of “Erasing and
Editing Titles,” and press ENTER.
6 Press ENTER at the end of the scene
(point B).
2 Select [Divide], and press ENTER.
The display for setting the dividing point
appears.
Edit
A-B Erase
Title
1
07/12 0:45:00
Edit
Point
Point
A
B
00:15:00
00:15:20
Divide
Title
2
07/12 0:45:00
Set Point A
Set Point B
Cancel
#01
00:00:04
00:15:20
OK
Divide
Cancel
OK
Thumbnail of point B
00:00:00
Current playback point
To reset either point A or B, select [Cancel]
and repeat from step 3.
3 Press H, and search for the point you
want to divide by pressing x, X, and m/
M.
7 Select [OK], and press ENTER.
The display asks for confirmation.
If you do not want to erase the scene, select
[Cancel] and press ENTER.
st
4 Press ENTER at the 1 dividing point.
st
The 1 point is set.
8 Select [OK], and press ENTER.
To reset the point, select [Cancel] and repeat
from step 3.
The scene is erased.
5 Press H, and search for the point you
want to erase by pressing x, X, and m/
M.
b Notes
• Images or sound may be momentarily interrupted at the
point where you erase the scene.
nd
• Sections shorter than three seconds may not be erased.
• The erased section may be slightly different from the
points you selected.
6 Press ENTER at the 2 dividing point.
nd
The 2 point is set.
• A chapter mark will not be made at the A–B erase point.
,continued
57
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Select [OK] from the sub-menu, and press
ENTER.
Editing a Title by Chapter
The title is divided in two. If you want to
If you do not want to divide the title, select
[Cancel] from the sub-menu, and press
ENTER.
You can make detailed editing to a title by using
the Chapter List menu that displays title contents
by chapter.
Hiding a title
1
4
7
2
5
8
0
3
6
9
+
RW
You can skip playing titles without deleting them
from the disc.
TITLE LIST
1 Select [Edit] in step 3 of “Erasing and
Editing Titles,” and press ENTER.
</M/m/,,
ENTER
2 Select [Hide], and press ENTER.
The title is displayed shaded in the Title List
menu.
To show the hidden title
Repeat the steps above and select [Show].
CHAPTER
MARK
1 Press TITLE LIST to turn on the Title List.
When editing a DVD-RW (VR mode), press
TITLE LIST repeatedly to switch the Title
List (Original) and Title List (Playlist), if
necessary.
2 Select a title, and press ENTER.
The sub-menu appears.
3 Select [Search], and press ENTER.
4 Select [Chapter] and press ENTER.
The Chapter List menu appears with contents
of the selected title (displayed as chapters).
Example: Chapter List (Original)
Chapter List Original
1/5
Title 1
07/12/2008 Sun 0:45:00 AUTO
58
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Select a chapter, and press ENTER.
The sub-menu appears with options available
for the selected chapter.
Hiding a chapter
+
RW
+
R
[Title]: Returns to the Title List menu (see
[Combine]: Combines two chapters into one
[Hide/Show]: Hides the chapter/Shows the
[Move]: Allows you to change the chapter
order within the Playlist title (see
You can skip playing chapters without deleting
from the disc.
Select [Hide] in step 6 of “Editing a Title by
Chapter,” and press ENTER.
The chapter is displayed shaded in the Chapter List
menu.
To play the title without skipping hidden
chapters
Select a title in the Title List and press ENTER.
Select [Full Play] from the sub menu, and press
ENTER.
[Playlist]: Allows you to create a new Playlist
title, or add contents to an existing Playlist
6 Select an edit option, and press ENTER.
The selected option is applied to the chapter.
See the pages in parentheses for the procedure.
To show the hidden chapter
Repeat the steps above and select [Show].
b Notes
• Images or sound may be momentarily interrupted at the
point where you hide the chapter.
• On other Sony DVD equipment, hidden chapters will
play without being skipped.
Erasing a chapter
-
RWVR
1 Select [Erase] in step 6 of “Editing a Title
by Chapter,” and press ENTER.
Creating chapters manually
The display asks for confirmation.
+
+
R
2 Select [OK], and press ENTER.
-
RW
RWVR
The chapter is erased.
You can create chapters within a title by inserting
chapter marks at the desired points.
Combining chapters
During playback or recording, press CHAPTER
MARK where you want to divide the title into
chapters.
The following display appears at the dividing
point. Title contents before and after this scene
become separate chapters.
+
RW
+
R
-
RWVR
Select [Combine] in step 6 of “Editing a Title by
Chapter,” and press ENTER.
The selected chapter is combined with the next
chapter in the Chapter List.
b Note
Chapter
If the next chapter on the DVD+RW or DVD+R is
hidden, show the chapter in the Title List before
combining. See “Hiding a chapter” (page 59).
z Hints
• Titles are automatically divided into chapters during
recording if [Auto Chapter] in the [Video] setup is set
,continued
59
Download from Www.Somanuals.com. All Manuals Search And Download.
b Note
If a message appears and indicates that no more chapter
marks can be added, you may not be able to record or edit.
Editing a Playlist
-
RWVR
Playlist edit allows you to edit or re-edit without
changing the actual recordings.
This section explains edit options available only
for Playlist titles. Edits explained in the previous
sections are also applicable if so indicated.
b Notes
• If you edit an original title after creating a Playlist title,
the results may affect the derived Playlist title.
• The picture may pause when an edited scene is played.
1
4
7
2
5
8
0
3
6
9
TITLE LIST
</M/m/,,
ENTER
Creating a Playlist title
1 Press TITLE LIST to turn on the Title List
(Original).
Press TITLE LIST again if the Title List
(Playlist) appears.
2 Select a title, and press ENTER.
The sub-menu appears.
[Search]: Displays the search options.
[Chapter]: Displays the Chapter List
(Original). When you want to add an
original chapter as a Playlist title, select
this and press ENTER. After the Chapter
List (Original) appears, select the chapter
and press ENTER, and then go to step 3.
[Playlist]: Allows you to create a new Playlist
title, or add contents to an existing Playlist
title.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Select [Playlist], and press ENTER.
Chapter List Playlist
1/5
4 Select [New Playlist], and press ENTER.
The title or chapter is added to the Playlist as
a new Playlist title.
Title 1
07/12/2008 Sun 0:45:00 AUTO
To create more Playlist titles, press TITLE
LIST and repeat the steps above.
Adding contents to an existing
Playlist title
5 Select a chapter, and press ENTER.
The sub-menu appears.
1 Select a title or chapter in step 2 of
6 Select [Move], and press ENTER.
7 Select a new location in the Chapter List,
2 Select [Playlist], and press ENTER.
and press ENTER.
The disc’s Playlist title names appear (if any).
The chapter moves to the new location.
To change the scene order more, repeat the
steps above.
Select a Playlist
New Playlist
Title 1
.
Title 2
b Note
Images or sound may be momentarily interrupted at the
point where the chapters change.
3 Select a Playlist title, and press ENTER.
The contents of original title or chapter
selected in step 1 are added to the Playlist title.
Rearranging chapters within a
Playlist title
You can move chapters in a Playlist title to create
a different playback order.
1 Press TITLE LIST to turn on the Title List
(Playlist).
Press TITLE LIST again if the Title List
(Original) appears.
2 Select a title, and press ENTER.
The sub-menu appears.
3 Select [Search], and press ENTER.
4 Select [Chapter] and press ENTER.
The Chapter List menu appears with the title
contents.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a Digital Video
Camera to the DV IN Jack
You can connect a digital video camera to the DV
IN jack on the recorder to record or edit from a
DV/Digital8 format tape. Operation is
straightforward because the recorder will fast
forward and rewind the tape for you – you do not
need to operate your digital video camera. Do the
following to start using the “DV Edit” functions of
this recorder.
DV Dubbing
Before DV Dubbing
This section explains dubbing with a digital video
camera via the DV IN jack on the front panel. If
you want to dub by way of the LINE IN jacks, see
To record from the DV IN jack
See also the instruction manual supplied with the
digital video camera before connecting.
The DV IN jack on this recorder conforms to the
i.LINK standard. You can connect any other
equipment that has an i.LINK (DV) jack, and
record digital signals.
Follow the instructions in “Connecting a Digital
Video Camera to the DV IN Jack,” and then move
on to the section on dubbing. For more
information about i.LINK, see “About i.LINK”
b Notes
• The DV IN jack is for input only. It will not output
signals.
• You cannot use the DV IN jack when:
– your digital video camera does not work with this
recorder. Connect the camera to the LINE IN jack
and follow the instructions of “Recording From
– the input signal is not in DVC-SD format. Do not
connect a MICRO MV format digital video camera
even if it has an i.LINK jack.
– the images on the tape contain copy protection
signals, which limit recording.
• If you want to play the disc on other DVD equipment,
z Hint
If you plan to do additional editing on a disc after the
initial dub, use the DV IN jack and record on a DVD-RW
(VR mode).
• The recorder does not support HDV mode.
Hookups
DVD recorder
to DV IN
i.LINK cable
(not supplied)
DV output
Digital video camera
: Signal flow
62
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Press Z (open/close) to close the disc
tray.
Dubbing From a DV/Digital8
Format Tape to a DVD
Wait until “REAd” disappears from the front
panel display.
For details on how to insert and format a new
+
RW
-
-
+
R
-
R
RWVR RWVideo
You can record a DV/Digital8 format tape onto a
disc. The recorder controls the digital video
camera. You can fast forward, rewind, and stop
the tape to select a scene using the recorder’s
remote control.
3 Insert the source DV/Digital8 format tape
into your digital video camera.
For the recorder to record or edit, your digital
video camera must be turned on and set to
video playback mode.
◆How chapters are created
The dubbed contents become one title, and the title
is divided into chapters. The recorder divides the
title into chapters according to the setting in
[Video] Setup (5 or 10-minute intervals, or does
4 Press INPUT on the remote repeatedly to
select “dV.”
The selected input changes as follows:
Programme
position
L1
L2
dV
L3
Z
1
4
7
2
5
8
0
3
6
9
5 Press REC MODE on the remote repeatedly
to select the recording mode.
INPUT
The recording mode changes as follows:
HQ
SP
LP
EP
ULP
SYSTEM
MENU
For details about the recording modes, see
</M/m/,,
ENTER
O RETURN
6 Press SYSTEM MENU to turn on the System
Menu.
H
m/M
z REC
7 Select [Setup] and press ENTER.
X
The Setup Display appears.
x REC STOP
REC MODE
8 Select
[Video] Setup and press ,.
9 Select [DV Input], and press ,.
Disc Record Mode
1 Press Z (open/close), and place a
recordable disc on the disc tray.
DV Input
Stereo 1
Stereo 2
LINE 3 In
Auto Chapter
Make sure that the disc has enough free space
to record the contents of your tape.
[Stereo 1] (default): Records original sound
only. Normally select this when dubbing a DV
format tape.
[Stereo 2]: Records additional audio only.
Select this only if you have added a second
Labelled side facing up
,continued
63
Download from Www.Somanuals.com. All Manuals Search And Download.
audio channel when recording with your
digital video camera.
10 Select an option, and press ENTER.
11 Press O RETURN to turn off the Setup
Display.
12 Press H to start playing the DV/Digital8
format tape.
The playback picture appears on the screen.
13 While watching the screen, search for the
point you want to start recording by
pressing m/M.
14 When you find the point you want, press
X.
15 Press z REC.
Playback starts from the selected point, and
the recorder starts recording.
To stop recording
Press x REC STOP. Note that it may take a few
seconds for the recorder to stop recording.
b Notes
• If you want to play the disc on other DVD equipment,
• You cannot connect more than one piece of digital
video equipment to the recorder.
• You cannot control the recorder using another device
or another recorder of the same model.
• You cannot record date, time, or the contents of the
cassette memory onto the disc.
• When dubbing from a DV/Digital8 format tape by way
of the DV IN jack, the recorder starts recording about
five seconds after the tape starts playing.
• If you dub a DV/Digital8 format tape that has been
edited on a PC using the DV IN jack, any audio
recorded on the Stereo 2 track may only be recorded as
noise.
• If you record from a DV/Digital8 format tape with a
sound track that is recorded in multiple sampling
frequencies (48 kHz, 44.1 kHz, or 32 kHz), no sound or
an unnatural sound will be output when playing back
the sampling frequency switch point on the disc.
• The recorded picture may be momentarily affected if
the picture size of the source image changes, or if there
is nothing recorded on the tape.
• Noise may occur when you switch the audio sampling
mode (e.g.48 kHz/16 bits t 32 kHz/12 bits).
• The video or sound may drop out during the recording
of start/stop points on the tape.
• If there is a blank space for one second or more on the
tape, DV dubbing ends automatically.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Press M/m to select the option you want to
set up, and press ,.
Settings and Adjustments
Auto Channel Setting
Manual CH Setting
Clock Setting
TV Type
France
Start
Using the Setup Displays
By using the Setup Displays, you can make
various adjustments to items such as picture and
sound, as well as select a language for the
subtitles.
LINE 3 In
Video output format
Power Save
Factory Set
The Setup Display consists of several levels to set
up options. To select the next level, press ,. To
select a previous level, press <.
4 Press M/m to select the item you want to
set up, and press ,.
b Note
Available options for the item appear.
Example: [TV Type]
Playback settings stored in the disc take priority over the
Setup Display settings, and not all of the functions
described may work.
Auto Channel Setting
Manual CH Setting
Clock Setting
TV Type
4:3 Letter Box
4:3 Pan Scan
16:9
1
4
7
2
5
8
0
3
6
9
LINE 3 In
Video output format
Power Save
Factory Set
SYSTEM
MENU
5 Press M/m to select the item you want to
set up, and press ENTER to conform.
Some items require additional settings.
</M/m/,,
ENTER
O RETURN
Auto Channel Setting
Manual CH Setting
Clock Setting
TV Type
4:3 Letter Box
4:3 Pan Scan
16:9
LINE 3 In
1 Press SYSTEM MENU to turn on the System
Menu.
Video output format
Power Save
Factory Set
2 Select [Setup] and press ENTER.
The Setup Display appears.
Auto Channel Setting
Manual CH Setting
Clock Setting
TV Type
To turn off the Setup Display
Press O RETURN.
LINE 3 In
Video output format
Power Save
Factory Set
Setup options:
[General], [Language], [Audio], [Lock],
[Video], [Disc]
65
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
4
Press ENTER while [Set] is selected.
The Channel List menu appears.
Channel and Clock Settings
(General)
PR
01
02
03
04
05
06
07
08
09
10
11
Ch.
C 12
C 23
C 7
Fine
0
Station
AWB1
AWB2
DTV
0
0
C 27
C 17
C 33
C 34
C 47
C 10
0
CH2
The [General] setup helps you to make channel,
clock, and other settings for the recorder.
0
LHTV
CSN
NICAM
PR-01
0
0
PTGLE
PSG
0
0
TV2
Select
[General] in the Setup Display. To use
the display, see “Using the Setup Displays” (page
The default settings are underlined.
Press M/m to select the programme position
you want to set, and press ENTER.
Auto Channel Setting
Manual CH Setting
Clock Setting
TV Type
France
Start
PR
01
02
03
04
05
06
07
08
09
10
11
Ch.
C 12
C 23
C 7
Fine
0
Station
AWB1
AWB2
DTV
0
0
C 27
C 17
C 33
C 34
C 47
C 10
0
CH2
LINE 3 In
0
LHTV
CSN
NICAM
PR-01
Video output format
Power Save
0
Manual CH Setting
Name
0
PTGLE
PSG
0
Move
Erase
Factory Set
0
TV2
Decoder On/Off
NICAM/Standard
[Auto Channel Setting]
Select an option from the sub-menu, and press
ENTER.
Presets all receivable channels automatically.
Select your country. Then select [Start] and press
ENTER.
[Manual CH Setting]: Sets the channel
[Name]: Changes the station name. The
display for entering characters appears. To
[Move]: Sorts the programme positions on the
Channel List. Press M/m to move the selected
programme position to a new location.
[Erase]: Disables a programme position you
do not need.
[Decoder On/Off]: Sets the channels for the
decoder. You need this setting to watch or
record PAY-TV/Canal Plus programmes.
Press ENTER so [Decoder] appears on the
display. Press ENTER again to turn off the
setting.
[Manual CH Setting]
Presets channels manually.
If some channels could not be set using the Auto
Channel Setting function, you can set them
manually.
If there is no sound or if the picture is distorted, the
wrong tuner system may have been preset during
[Auto Channel Setting]. Set the correct tuner
system manually in the steps below.
1
Select [Manual CH Setting] and press ,.
Auto Channel Setting
Manual CH Setting
Clock Setting
TV Type
Set
LINE 3 In
[NICAM/Standard]: Sets the channels for the
NICAM broadcast. Normally, [NICAM] is lit
on the display. If the sound from NICAM
broadcast is not clear, press ENTER so
[NICAM] disappears.
Video output format
Power Save
Factory Set
b Note
Be sure to correctly select the programme position you
want to disable. If you disable the wrong programme
position by mistake, you need to reset that channel
manually.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
◆To set the channels manually
When you select [Manual CH Setting] in step 4
above, the display for setting channels appears.
TV system
Channel coverage
Ireland A – J VHF
South Africa 4 – 11, 13 VHF
B21 – B69 UHF
I (Great Britain/
Ireland)
Colour system: PAL
1
Press </, to select the item and press M/m
to change the setting.
[PR] indicates the selected programme
position.
S1 – S20 CATV
S21 – S41 HYPER
S01 – S05 CATV
F2 – F10 VHF
PR Seek
01
Ch.
C 2
Fine
0
L (France)
Colour system:
SECAM
OK
F21 – F69 UHF
B – Q CATV
S21 – S41 HYPER
[Seek]: Searches for a channel automatically.
Searching stops when the recorder tunes in a
channel.
[Clock Setting]
[Ch.]: Changes the channel number.
[Fine]: Fine tunes the channel to obtain a
clearer picture.
[PAL/SECAM]: This appears only for
selected models. For customers in France,
switch channels from PAL to SECAM if the
reception is poor.
◆[Auto] (not available for Russian model)
Turns on the Auto Clock Set function when a
programme position in your local area broadcasts
a time signal.
1
Select [Clock Setting] and press ,.
Auto Channel Setting
Manual CH Setting
2
Select [OK] and press ENTER.
The setting is stored and the display returns to
the Channel List.
To preset other channels, follow from step 3
Clock Setting
TV Type
Auto
Manual
LINE 3 In
Date 12
/
4
Video output format
Power Save
Factory Set
Year 2008
Time 12
:
00
◆Receivable channels
TV system
Channel coverage
2
Select [Auto] and press ENTER.
BG (West European E2 - E12 VHF
Countries, except
Italia A – H VHF
those listed below)
z Hint
If you select [Auto], the Auto Clock Set function is
Colour system: PAL
activated whenever the recorder is turned off.
E21 – E69 UHF
◆[Manual]
S1 – S20 CATV
S21 – S41 HYPER
If the Auto Clock Set function did not set the clock
correctly for your local area, set the clock
manually.
S01 – S05 CATV
DK (East European R1 – R12 VHF
1
Select [Clock Setting] and press ,.
Countries)
Colour system: PAL
R21 – R69 UHF
Auto Channel Setting
Manual CH Setting
S1 – S20 CATV
S21 – S41 HYPER
S01 – S05 CATV
Clock Setting
TV Type
Auto
Manual
LINE 3 In
Date 12
/
4
Video output format
Power Save
Factory Set
Year 2008
Time 12
:
00
,continued
67
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Select [Manual] and press ENTER.
[LINE 3 In]
Sets the LINE 3/DECODER jack for inputting
encoded video signals.
Press M/m to set the day, and press ,.
Set the month, year, hour, and minutes in
sequence. Press </, to select the item to be
set, then press M/m to set the numbers.
[ Decoder ]
Select this when connecting a
PAY-TV or Canal Plus decoder.
[ Other
Device ]
Select this when connecting
devices other than the above
decoder (e.g., VCR).
To change the numbers, press < to return to
the item to be changed, and press M/m.
4
Press ENTER to start the clock.
[Video output format]
[TV Type]
Selects according to your TV connection.
Selects the aspect ratio of the connected TV (4:3
standard or wide).
[ RGB ]
Select this when connecting via
the LINE 1-TV jack.
[ 4:3 Letter
Box ]
Select this when you connect a
4:3 screen TV. Displays a wide
picture with bands on the upper
and lower portions of the screen.
[ YPbPr ]
Select this when connecting via
the COMPONENT VIDEO OUT
jacks.
[ 4:3 Pan
Scan ]
Select this when you connect a
4:3 screen TV. Automatically
displays a wide picture on the
entire screen and cuts off the
portions that do not fit.
[Power Save]
Selects whether to turn off the front panel display
when the power is off.
[ 16:9 ]
Select this when you connect a
wide-screen TV or a TV with a
wide mode function.
[ Off ]
The front panel display remains
turned on.
[ On ]
Turns off the front panel display.
[4:3 Letter Box]
[Factory Set]
Returns the recorder’s settings to the factory
Note that Parental Control settings in the [Lock]
setup remain unaffected.
[4:3 Pan Scan]
[16:9]
b Notes
• Depending on the disc, [4:3 Letter Box] may be
selected automatically instead of [4:3 Pan Scan] or vice
versa.
• When connecting to the HDMI OUT jack with output
resolution 720p, 1080i, or 1080p, the setting is fixed to
[16:9].
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Settings
Audio Settings
The [Language] setup allows you to select a
language for the recorder’s display and discs.
The [Audio] setup allows you to adjust the sound
according to the playback and connection
conditions.
Select
[Language] in the Setup Display. To use
The default settings are underlined.
Select
[Audio] in the Setup Display. To use the
The default settings are underlined.
Display Menu
Disc Menu
Français
Nederlands
English
Dolby Digital Output
DTS Output
Dolby Digital -> PCM
Dolby Digital
Disc Audio
Disc Subtitle
MPEG Output
96kHz PCM Output
Audio DRC
Cesky
Deutsch
Vocal
Magyar
Italiano
Polski
[Dolby Digital Output] (DVDs only)
Selects the type of Dolby Digital signal.
[Display Menu]
Switches the display language on the screen.
[ Dolby
Digital t
PCM ]
Select this when the recorder is
connected to an audio
component without a built-in
Dolby Digital decoder.
[Disc Menu] (DVD VIDEO only)
Switches the language for the DVD menu.
[Disc Audio] (DVD VIDEO only)
Switches the language of the sound track.
[ Dolby
Digital ]
Select this when the recorder is
connected to an audio
component with a built-in
Dolby Digital decoder.
[Disc Subtitle] (DVD VIDEO only)
Switches the language of the subtitles recorded on
the disc.
b Note
This affects the output from the DIGITAL OUT
(COAXIAL)/HDMI OUT jacks.
If the HDMI OUT jack is connected to equipment not
compatible with Dolby Digital signals, select [Dolby
Digital t PCM].
[ Original ]
[ Others ]
Selects the language given
priority in the disc.
The display for entering a
language code appears. Press the
number buttons to enter a four-
digit code number from
[DTS Output] (DVD VIDEO only)
Selects whether or not to output DTS signals.
and press ENTER.
[ Off ]
Turns off the subtitles.
[ Off ]
Select this when the recorder is
connected to an audio
component without a built-in
DTS decoder.
b Note
If you select a language in [Disc Menu], [Disc Subtitle],
or [Disc Audio] that is not recorded on the DVD VIDEO,
one of the recorded languages will be automatically
selected.
[ On ]
Select this when the recorder is
connected to an audio
component with a built-in DTS
decoder.
,continued
69
Download from Www.Somanuals.com. All Manuals Search And Download.
b Note
– DIGITAL OUT (COAXIAL)/HDMI OUT jack
only when [Dolby Digital Output] is set to
This affects the output from the DIGITAL OUT
(COAXIAL)/HDMI OUT jacks.
If the HDMI OUT jack is connected to equipment not
compatible with DTS signals, select [Off].
[ Off ]
[ On ]
Normally select this.
Makes low sounds clear even if
you turn the volume down.
[MPEG Output] (DVD VIDEO only)
Selects the type of MPEG audio signal.
[ MPEG
t PCM ]
Select this when the recorder is
connected to an audio component
without a built-in MPEG decoder.
If you play MPEG audio sound
tracks, the recorder outputs stereo
signals.
[Vocal] (Karaoke DVD only)
Mixes karaoke channels into normal stereo.
This function is effective for multi-channel
karaoke DVDs only.
[ Off ]
Does not mix karaoke channels
into normal stereo. You can turn
off the guide vocal on a multi-
channel DVD.
[ MPEG ]
Select this when the recorder is
connected to an audio component
with a built-in MPEG decoder.
[ On ]
Normally select this.
b Note
This affects the output from the DIGITAL OUT
(COAXIAL)/HDMI OUT jacks.
If the HDMI OUT jack is connected to equipment not
compatible with MPEG audio signals, select [MPEG t
PCM].
[96kHz PCM Output] (DVD VIDEO only)
Selects the sampling frequency of the audio
signal.
[96kHzt
48kHz ]
The audio signals of DVD
VIDEOs are always converted to
48 kHz/16 bit.
[ 96kHz ]
All types of signals, including
96 kHz/24 bit, are output in their
original format.
b Note
This affects the output from the DIGITAL OUT
(COAXIAL)/HDMI OUT jacks.
If the HDMI OUT jack is connected to equipment not
compatible with 96 kHz signals, select [96kHz t
48kHz].
[Audio DRC] (Dynamic Range Control) (Dolby
Digital DVDs only)
Makes the sound clear when the volume is turned
down when playing a DVD that conforms to
[Audio DRC]. This affects the output from the
following jacks:
– AUDIO OUT (L/R) jacks
– LINE 1-TV jack
– LINE 3/DECODER jack
70
Download from Www.Somanuals.com. All Manuals Search And Download.
The password is stored.
• If you make a mistake, press < repeatedly
to delete numbers one by one, then re-enter
it.
Parental Control Settings
(Lock)
2
To change the password, press ENTER while
[Change] is selected.
[Erase]: Erases the password. Enter the
registered password.
Playback of some DVD VIDEOs can be limited
according to a predetermined level, such as the age
of the users. Scenes may be blocked or replaced
with different scenes.
3
4
5
Enter the registered password.
Enter a new four-digit password.
Enter the password again to confirm.
Select
[Lock] in the Setup Display. To use the
[Parental Control]
z Hint
If you forget your password, clear the password and
register a new password.
Press SYSTEM MENU and select [Setup] to turn on the
Setup Display. Enter the six-digit number 210499 using
the number buttons. Select [OK] and press ENTER. The
registered password is cleared.
Selects the rating level.
1
Select [Parental Control] and press ,.
Parental Control
Set Password
Area Code
Off
Level 8
Level 7
Level 6
Level 5
Level 4
Level 3
Level 2
Level 1
[Area Code]
Selects a code for a geographic area as the
playback rating level. See “Area Code List” (page
1
2
Select [Area Code] and press ,.
The display asks for the password.
Enter the four-digit password using the
number buttons.
2
3
Enter the four-digit password using the
number buttons.
3
4
Press M/m to enter the first character of the
area and press ,.
Select the level and press ENTER.
The lower the level, the stricter the limitation.
If you select [Off], the Parental Control
function does not activate.
Press M/m to enter the second character and
press ENTER.
b Notes
[Set Password]
Changes or deletes the password for the Parental
Control function.
• When you play discs which do not have the Parental
Control function, playback cannot be limited on this
recorder.
• Depending on the disc, you may be asked to change the
Parental Control level while playing the disc. In this
case, enter your password, then change the level.
1
Select [Set Password] and press ,.
If you have not entered a password, the
display for entering a new password appears.
Parental Control
Set Password
Area Code
Change
New
Password
Enter a four-digit password using the number
buttons. Enter the password again to confirm.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
[Auto Chapter]
Automatically divides a recording (title) into
chapters by inserting chapter markings at a
specified interval. The markings are inserted while
the recording is being made.
Recording Settings (Video)
The [Video] setup allows you to adjust the settings
related to recording.
[ No
Separation ]
No chapter mark is inserted.
Select
[Video] in the Setup Display. To use
the display, see “Using the Setup Displays” (page
65). The default settings are underlined.
[ 5 minutes ]
[ 10 minutes ]
Sets the interval to 5 minutes.
Sets the interval to 10 minutes.
Disc Record Mode
DV Input
HQ
SP
b Note
LINE 3 In
LP
Depending on the size of the recording being made, the
actual interval may vary from the interval selected in
[Auto Chapter]. When recording in ULP mode, the
interval is set to 10-minutes. The selected interval should
only be used as an approximation to create chapters.
Auto Chapter
EP
ULP
[Disc Record Mode]
Selects one of the following recording modes:
HQ, SP, LP, EP and ULP (in the order of picture
quality).
[DV Input]
Selects the stereo track when recording from a
digital video camera connected to the DV IN jack
on the front panel.
[ Stereo 1 ]
Records original sound at the
time of shooting. Normally
select this when dubbing a DV/
Digital8 format tape.
[ Stereo 2 ]
Records only additional sound
over-dubbed after shooting.
[LINE 3 In]
Selects a method of inputting video signals for the
LINE 3/DECODER jack. The picture will not be
clear if this setting does not match the type of
video input signal.
[ Auto ]
The video input signal will
automatically track the video
signal received.
[ Video ]
Inputs composite video
signals.
[ RGB ]
Inputs RGB signals.
[S-Video]
Inputs S-Video signals.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Enter the registration code, and then press
ENTER.
Disc Settings
The [Disc] setup contains disc-related items such
as disc protection and labeling.
Select
[Disc] in the Setup Display. To use the
The default settings are underlined.
Format DVD
Finalize
Start
Input Disc Name
Protect Disc
PBC
DivX
[Format DVD]
You can manually re-format a DVD+RW or
DVD-RW disc to make a blank disc. See page 28
for details.
[Finalize]
“Finalising” makes discs playable on other DVD
[Input Disc Name]
Name or rename the recorded discs to make them
[Protect Disc]
Protects disc recording against erasure and
[PBC] (Playback Control)
Turns the PBC function on or off when playing
VIDEO CDs.
[ Off ]
The PBC function is not
activated. VIDEO CDs with
PBC will be played the same way
as audio CDs.
[ On ]
The PBC function is activated
when playing VIDEO CDs with
PBC.
[DivX]
®
Displays the DivX VOD (Video On Demand)
registration code of this recorder, which is
required for video rental and purchases at the
®
DivX VOD Service site (www.divx.com/vod).
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Resetting the Recorder
(Factory Set)
Select this to reset the recorder to all its default
settings. Note that Parental Control settings in the
[Lock] setup remain unaffected.
1 Press SYSTEM MENU to turn on the System
Menu.
2 Select [Setup] and press ENTER.
3 Select
[General] and press ,.
4 Select [Factory Set] and press ,.
Auto Channel Setting
Manual CH Setting
Clock Setting
TV Type
LINE 3 In
Video output format
Power Save
Factory Set
SET
5 Press ENTER while [SET] is selected.
The display asks for confirmation.
6 Select [OK] and press ENTER.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
, You have set the recorder to progressive format
even though your TV cannot accept the
progressive signals. In this case, remove the disc
and close the disc tray. Then press the
Additional Information
RESOLUTION button on the recorder to switch
the signals.
Troubleshooting
, Even if your TV is compatible with progressive
format (525p/625p) signals, the image may be
affected when you set the recorder to progressive
format. In this case, remove the disc and close the
disc tray. Then press the RESOLUTION button
on the recorder to switch the signals.
If you experience any of the following difficulties
while using the recorder, use this troubleshooting
guide to help remedy the problem before
requesting repairs. Should any problem persist,
consult your nearest Sony dealer.
, You are playing a disc recorded in a colour
system that is different from your TV.
Power
TV programme reception does not fill the
screen.
, Set the channel manually in [Manual CH Setting]
The power does not turn on.
, Check that the mains lead is connected securely.
, Select the correct source using the INPUT
button, or select a channel of any TV programme
using the PROG +/– buttons.
Picture
There is no picture.
, Re-connect all connecting cords securely.
, The connecting cords are damaged.
, Switch the input selector on your TV (such as to
“VCR” and “AV1”) so that the signal from the
recorder appears on the TV screen.
, If you connect the recorder to your TV via the
LINE 1-TV jack, set [Video output format] in
[General] Setup to [RGB] (page 68).
, If you connect the recorder to your TV via only
the COMPONENT VIDEO OUT jacks, connect
via the LINE 1-TV jack and set [Video output
, When [Video output format] in [General] Setup
to the COMPONENT VIDEO OUT jacks.
, This recorder cannot record NTSC signals.
TV programme pictures are distorted.
, Reorient the TV aerial.
, Adjust the picture (see the TV’s instruction
manual).
, Place the recorder and TV farther apart.
, Place the TV and any bunched aerial cables
farther apart.
, The aerial cable is connected to the AERIAL
OUT jack on the recorder. Connect the cable to
the AERIAL IN jack.
TV channels cannot be changed.
, A timer recording started, which changed the
channels.
Picture noise appears.
, If the picture output signal from your recorder
passes through your VCR to get to your TV, or if
you are connected to a combination TV/VIDEO
player, the copy-protection signal applied to
some DVD programmes could affect picture
quality.
,continued
75
Download from Www.Somanuals.com. All Manuals Search And Download.
, The recorder is in reverse play, fast forward,
slow motion, or pause mode.
, If the audio signal does not come through the
DIGITAL OUT (COAXIAL)/HDMI OUT jacks,
check the [Audio] setup settings (page 69).
The picture from equipment connected to the
recorder’s input jack does not appear on the
screen.
, If the equipment is connected to the LINE 1-TV
jack, select “L1” in the front panel display by
pressing INPUT.
Sound is noisy.
If the equipment is connected to the LINE 2 IN
jacks, select “L2” in the front panel display by
pressing INPUT.
If the equipment is connected to the LINE 3/
DECODER jack, select “L3” in the front panel
display by pressing INPUT.
, When playing a CD with DTS sound tracks,
noise will come from the AUDIO OUT (L/R)
jacks, LINE 1-TV jack, or LINE 3/DECODER
Recorded or played back audio is not stereo.
, The TV is not stereo-compatible.
, The broadcast programme is not in stereo format.
, The AV output jacks on the recorder are not
connected to TV AV input jacks.
If the equipment is connected to the DV IN jack,
(this is usually for a digital video camera
connection), select “dV” in the front panel
display by pressing INPUT.
The playback picture or TV programme from
the equipment connected through the recorder
is distorted.
, If the playback picture output from a DVD
player, VCR, or tuner goes through your recorder
before reaching your TV, the copy-protection
signal applied to some programmes could affect
picture quality. Disconnect the playback
equipment in question and connect it directly to
your TV.
The sound volume is low.
, The sound volume is low on some DVDs.
The sound volume may improve if you set
[Audio DRC] in the [Audio] setup to [On]
An alternate audio track cannot be recorded or
played.
, If an audio channel other than “Main+Sub” is
selected, you cannot record both main and sub
sounds on DVD-RWs (Video mode)/DVD-Rs.
Check the selected audio channel before you
start recording.
, If you have connected an AV amplifier to the
DIGITAL OUT (COAXIAL) jack and want to
change the audio track during playback, set
[Dolby Digital Output] in the [Audio] setup to
The picture does not fill the screen.
, Set [TV Type] in the [General] setup in
accordance with the screen size of your TV
The picture does not fill the screen, even
though the aspect ratio is set in [TV Type] in
the [General] setup.
, The screen size of the title is fixed.
Playback
The picture is black and white.
The recorder does not play any type of disc.
, The disc is upside down. Insert the disc with the
playback side facing down.
, If you are using a SCART cord, be sure to use
one that is fully wired (21 pins).
, The disc is not correctly inserted.
, Moisture has condensed inside the recorder. In
this case, if the recorder is on, leave it on (if it is
off, leave it off) for about an hour until the
moisture evaporates.
, If the disc was recorded on another recorder and
play the disc.
Sound
There is no sound.
, Re-connect all connections securely.
, The connecting cord is damaged.
, The input source setting on the audio component
or the connection to the audio component is
incorrect.
, Cancel the rating function or change the rating
76
Download from Www.Somanuals.com. All Manuals Search And Download.
, The angles cannot be changed for the titles
The recorder does not start playback from the
beginning.
recorded on this recorder.
, You have inserted a disc whose Title menu or
DVD menu automatically appears on the TV
screen when it is first inserted. Use the menu to
start playback.
The MP3 audio tracks, JPEG image files, DivX
video files do not play.
, The MP3 audio tracks, JPEG image files, DivX
video files are not recorded in a format that the
The recorder starts playing automatically.
, The DVD VIDEO features an auto playback
function.
Recording/Timer recording/
Editing
Playback stops automatically.
, If the DVD has an auto pause signal, the recorder
stops playback at the auto pause signal.
The programme position cannot be changed
from the programme you are recording.
, Set the TV’s input source to “TV.”
Some functions such as Stop, Search, or Slow-
motion Play cannot be performed.
, Depending on the DVD, you may not be able to
do some of the operations above. See the
instructions supplied with the disc.
Recording does not start immediately after you
press z REC.
, Operate the recorder only after “REAd”
disappears from the front panel display.
Nothing was recorded even though you set the
timer setting correctly.
The language for the sound track cannot be
changed.
, Multilingual tracks are not recorded on the DVD
being played.
, The DVD VIDEO prohibits the changing of the
language for the sound track.
, Try changing the language using the DVD
VIDEO’s menu.
, There was a power failure during recording.
, The recorder’s internal clock stopped due to a
power failure. Reset the clock (page 67).
, The channel was disabled after the timer
recording was set. See “Channel and Clock
, Disconnect the mains lead (the power cord) from
the mains, and connect it again.
, The programme contains copy protection signals
that restrict copying.
The subtitle language cannot be changed or
turned off.
, Multilingual subtitles are not recorded on the
DVD VIDEO.
, Another timer setting overlapped the timer
setting (page 40).
, The DVD VIDEO prohibits changing of the
subtitles.
, Try changing the subtitle using the DVD
VIDEO’s menu.
, There is no DVD inside the recorder.
, There is not enough disc space for the recording.
, The disc is protected (DVD-RW (VR mode))
, The subtitles cannot be changed for the titles
recorded on this recorder.
, The recorder was in the process of DV Dubbing
The angles cannot be changed.
, Multi-angles are not recorded on the DVD
VIDEO being played.
, You are trying to change the angles when “
does not appear on the TV screen (page 47).
, The DVD VIDEO prohibits changing angles.
Recording does not stop immediately after you
press x REC STOP.
, It will take a few seconds for the recorder to input
disc data before recording can stop.
On-screen instructions may appear after pressing
x REC STOP. In the case, follow the on-screen
instructions.
”
, Try changing the angle using the DVD VIDEO’s
menu.
,continued
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer recording is not complete or did not start
from the beginning.
, There was a power failure before or during
, Another timer setting overlapped the timer
Other Sony equipment responds to the remote.
, The same command mode is set for both the
equipment and recorder. Set a different
command mode for the recorder (page 19).
Others
, Disc space was not sufficient.
The recorder does not detect USB memory
connected to the recorder.
, Make sure that the USB memory is securely
Contents previously recorded were erased.
, Data that is not playable on this recorder but was
recorded on a DVD with a PC will be erased
from the disc when the disc is inserted.
, Check that the USB memory is not damaged.
The recorder does not operate properly.
, Restart the recorder. Press down "/1 on the
recorder for more than five seconds until the
recorder turns off. If a disc is still in the recorder,
press Z (open/close) and remove the disc.
, When static electricity, etc., causes the recorder
to operate abnormally, turn off the recorder and
wait until the clock appears in the front panel
display. Then, unplug the recorder and after
leaving it off for a while, plug it in again.
Display
The clock has stopped.
, The clock stopped due to a power failure. Reset
The “ ” indicator is flashing.
, The disc does not have enough space.
, Insert a recordable disc into the recorder.
The disc tray does not open after you press Z
(open/close).
, It may take a few seconds for the disc tray to
open after you have recorded or edited a DVD.
This is because the recorder is adding disc data to
the disc.
The recording mode indication is incorrect.
, When the recording or dubbing is less than three
minutes, the recording mode indication may be
displayed incorrectly. The actual recording itself
is correctly made in the selected recording mode.
Remote control
Mechanical sound is heard when the recorder
is off.
, While the recorder is adjusting the clock for the
Auto Clock Set function or operational noises
(such as the internal fan) may be heard, even
when the power is off. This is not a malfunction.
The remote does not function.
, The batteries are weak.
, The remote is too far from the recorder.
, There is an obstacle in the path of the remote
control and the recorder.
, The remote’s manufacturer code returned to the
default setting when you replaced the batteries.
, Turn on the recorder.
, The remote is not pointed at the remote sensor on
the recorder.
, Different command modes are set for the
recorder and remote. Set the same command
setting for this recorder and the supplied remote
is “3 (Default setting).” You can check the
current command mode in the front panel display
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Recordable and Playable Discs
Type
Disc Logo
Icon used Formatting
Compatibility with other
DVD players (finalising)
in this
(new discs)
manual
DVD+RW
Automatically
formatted in +VR compatible players
Playable on DVD+RW
mode (DVD+RW (finalisation necessary)
VIDEO)
+
RW
DVD-RW VR
Format in VR
mode (page 28)
Playable only on VR
mode compatible players
(finalisation necessary)
mode
-
RWVR
Video
mode
Format in Video
mode (page 28)
Playable on most DVD
players (finalisation
necessary) (page 35)
-
RWVideo
DVD+R
DVD-R
Automatically
formatted in +VR players (finalisation
mode (DVD+R
VIDEO)
Playable on most DVD
+
R
necessary) (page 35)
Automatically
formatted in Video players (finalisation
mode necessary) (page 35)
Playable on most DVD
Video
mode
-
R
,continued
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Usable disc versions (as of May 2008)
• 8x-speed or slower DVD+RWs
• 6x-speed or slower DVD-RWs (Ver.1.1, Ver.1.2
with CPRM*)
• 16x-speed or slower DVD+Rs
• 16x-speed or slower DVD-Rs (Ver.2.0, Ver.2.1
with CPRM*)
“DVD+RW,” “DVD-RW,” “DVD+R,” and “DVD-R”
are trademarks.
* CPRM (Content Protection for Recordable Media) is a
coding technology that protects copyrights for images.
Discs that cannot be recorded on
• DVD-R DL (Dual Layer)/+R DL (Double
Layer) discs
• DVD-RAMs
• 8cm discs
Maximum recordable number of titles
Disc
Number of titles
DVD-RW/DVD-R
DVD+RW/DVD+R
99
49
b Notes
• You cannot mix VR mode and Video mode on the same
DVD-RW. To change the disc’s format, reformat the
erased after reformatting.
• You cannot shorten the time required for recording
even with high-speed discs.
• It is recommended that you use discs with “For Video”
printed on their packaging.
• You cannot add new recordings to DVD+Rs, DVD-Rs,
or DVD-RWs (Video mode) that contain recordings
made on other DVD equipment.
• In some cases, you may not be able to add new
recordings to DVD+RWs that contain recordings made
on other DVD equipment. If you do add a new
recording, note that this recorder will rewrite the DVD
menu.
• You cannot edit recordings on DVD+RWs, DVD-RWs
(Video mode), DVD+Rs, or DVD-Rs that are made on
other DVD equipment.
• If the disc contains PC data unrecognisable by this
recorder, the data may be erased.
• You may not be able to record, edit, or dub on some
recordable discs, depending on the disc.
• Do not insert any discs that cannot be recorded or
played on this recorder. This may cause the recorder to
malfunction.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Playable Discs
Icon used in
this manual
Type
Disc Logo
Characteristics
Discs such as movies that can be
purchased or rented
DVD VIDEO
This recorder also recognises DVD-
RAMs* as DVD Video compatible
discs.
DVD
VIDEO CDs or CD-Rs/CD-RWs in
VIDEO CD/Super VIDEO CD format
VIDEO CD
CD
VCD
CD
Music CDs or CD-Rs/CD-RWs in
music CD format
DVD+RWs/DVD+Rs/DVD-RAMs*
containing MP3 audio tracks or DivX
video files
DVD-RWs/DVD-Rs/DVD-ROMs
containing MP3 audio tracks, JPEG
image files or DivX video files
DATA DVD
DATA CD
—
—
DATA DVD
CD-ROMs/CD-Rs/CD-RWs
containing either MP3 audio tracks,
JPEG image files or DivX video files
DATA CD
“DVD VIDEO” and “CD” are trademarks.
• DVD Audio discs
• Cartridge-only type DVD-RAMs
• HD layer on Super Audio CDs
• DVD VIDEOs with a different region code
• DVDs that were recorded on a different recorder
and not correctly finalised.
DivX, DivX Certified, and associated logos are
trademarks of DivX, Inc. and are used under license.
®
DivX is a video file compression technology,
developed by DivX, Inc.
* If the DVD-RAM has a removable cartridge, remove
the cartridge before playback.
Note on playback operations of DVD VIDEOs/
VIDEO CDs
Discs that cannot be played
• PHOTO CDs
• CD-ROMs/CD-Rs/CD-RWs that are recorded in
a format different from the formats mentioned in
the table above.
• Data part of CD-Extras
• BDs (Blu-ray Discs)
• HD DVDs
• Discs recorded with an AVCHD-compatible
DVD video camera
Some playback operations of DVD VIDEOs/
VIDEO CDs may be intentionally set by software
producers. Since this recorder plays DVD
VIDEOs/VIDEO CDs according to the disc
contents the software producers designed, some
playback features may not be available. Refer to
the instructions supplied with the DVD VIDEOs/
VIDEO CDs.
• DVD-ROMs/DVD+RWs/DVD-RWs/
DVD+Rs/DVD-Rs that do not contain DVD
Video, DivX video, JPEG image files, or MP3
audio tracks.
Region code (DVD VIDEO only)
Your recorder has a region code printed on the rear
of the unit and will only play DVD VIDEOs
,continued
81
Download from Www.Somanuals.com. All Manuals Search And Download.
(playback only) labelled with identical region
codes. This system is used to protect copyrights.
DVD VIDEOs labelled
recorder.
will also play on this
ALL
If you try to play any other DVD VIDEO, the
message “Playback prohibited by region code.”
will appear on the TV screen. Depending on the
DVD VIDEO, no region code indication may be
labelled even though playing the DVD VIDEO is
prohibited by area restrictions.
Region code
Music discs encoded with copyright protection
technologies
This product is designed to play back discs that
conform to the Compact Disc (CD) standard.
Various music discs encoded with copyright
protection technologies are being marketed by
some record companies. Please be aware that
among those discs, there are some that do not
conform to the CD standard and may not be
playable by this product.
Note on DualDiscs
A DualDisc is a two sided disc product which
mates DVD recorded material on one side with
digital audio material on the other side.
However, since the audio material side does not
conform to the Compact Disc (CD) standard,
playback on this product is not guaranteed.
b Notes
• Some DVD+RWs/DVD+Rs, DVD-RWs/DVD-Rs,
DVD-RAMs, or CD-RWs/CD-Rs cannot be played on
this recorder due to the recording quality or physical
condition of the disc, or the characteristics of the
recording device and authoring software. The disc will
not play if it has not been correctly finalised. For more
information, refer to the operating instructions for the
recording device.
• If the disc contains PC data unrecognisable by this
recorder, the data may be erased.
• Do not insert any discs that cannot be recorded or
played on this recorder. This may cause the recorder to
malfunction.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code List
The language spellings conform to the ISO 639: 1988 (E/F) standard.
Language
Code
Language
Code
Language
Code
Language
Code
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
9072
7282
6783
6865
7876
6978
6979
6984
7079
7074
7073
7082
7089
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
7678
7684
7775
7771
7783
7776
7773
Marathi
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
8373
8375
8376
6983
8385
8387
8386
8476
8471
8465
Telugu
Thai
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
8469
8472
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Punjabi
Pashto; Pushto
Persian
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Polish
Portuguese
Quechua
Rhaeto-Romance
Romanian
Russian
Breton
Italian
Bulgarian
Burmese
Byelorussian
Chinese
Croatian
Czech
Javanese
Kannada
Kashmiri
Kazakh
Samoan
Sanskrit
Scots Gaelic
Serbian
Kirghiz
Serbo-Croatian
Shona
Korean
Danish
Kurdish
Sindhi
Dutch
Laothian
Latin
Singhalese
Slovak
English
Esperanto
Estonian
Faroese
Fiji
Latvian; Lettish
Lingala
Slovenian
Spanish
Lithuanian
Macedonian
Malagasy
Malay
Sundanese
Swahili
Finnish
Swedish
Tagalog
French
Frisian
Malayalam
Maori
Tajik
Tamil
Area Code List
Code Area
Code Area
Code Area
Code Area
AF
AN
Afghanistan
Netherlands
Antilles
ES
ET
FI
Spain
Ethiopia
Finland
Fiji
LY
Libya
SG
SI
Singapore
Slovenia
MA
MC
MN
MV
MX
MY
NG
NL
Morocco
Monaco
Mongolia
Maldives
Mexico
SK
SN
SV
TH
TR
TW
UA
UG
US
UY
UZ
VN
ZA
ZW
Slovak Republic
Senegal
AR
AT
AU
BE
BO
BR
BT
BY
CA
CG
CH
CL
CN
CO
CR
CY
CZ
DE
DK
EC
EG
Argentina
Austria
FJ
FR
GB
GL
GR
HK
HR
HU
ID
France
El Salvador
Thailand
Australia
Belgium
Bolivia
Great Britain
Greenland
Greece
Hong Kong
Croatia
Malaysia
Nigeria
Turkey
Taiwan
Brazil
Netherlands
Norway
Nepal
Ukraine
Bhutan
NO
NP
NZ
OM
PA
PE
PH
PK
PL
Uganda
Belarus
Hungary
Indonesia
Ireland
United States
Uruguay
Canada
Congo
New Zealand
Oman
IE
Uzbekistan
Vietnam
Switzerland
Chile
IL
Israel
Panama
IN
India
Peru
South Africa
Zimbabwe
China
IT
Italy
Philippines
Pakistan
Colombia
Costa Rica
Cyprus
JM
JP
KE
KH
KR
KW
LK
LU
Jamaica
Japan
Poland
Portugal
Kenya
PT
Czech Republic
Germany
Denmark
Ecuador
Egypt
Cambodia
South Korea
Kuwait
PY
RO
RU
SA
SE
Paraguay
Romania
Russian Federation
Saudi Arabia
Sweden
Sri Lanka
Luxembourg
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes about the discs
• To keep the disc clean, handle the disc by its
edge. Do not touch the surface. Dust,
fingerprints, or scratches on the disc may cause
it to malfunction.
Notes About This Recorder
On operation
• If the recorder is brought directly from a cold to
a warm location, or is placed in a very damp
room, moisture may condense on the lenses
inside the recorder. Should this occur, the
recorder may not operate properly. In this case,
if the recorder is on, leave it on (if it is off, leave
it off) for about an hour until the moisture
evaporates.
• Do not expose the disc to direct sunlight or heat
sources such as hot air ducts, or leave it in a car
parked in direct sunlight as the temperature may
rise considerably inside the car.
• After playing, store the disc in its case.
• Clean the disc with a cleaning cloth. Wipe the
disc from the centre out.
• When you move the recorder, take out any discs
to avoid damaging the disc.
On adjusting volume
Do not turn up the volume while listening to a
section with very low level inputs or no audio
signals. If you do, the speakers may be damaged
when a peak level section is played.
On cleaning
• Do not use solvents such as benzine, thinner,
commercially available cleaners, or anti-static
spray intended for vinyl LPs.
• Do not use the following discs.
– A disc that has a non-standard shape (e.g.,
card, heart).
Clean the cabinet, panel, and controls with a soft
cloth slightly moistened with a mild detergent
solution. Do not use any type of abrasive pad,
scouring powder or solvent such as alcohol or
benzine.
– A disc with a label or sticker on it.
– A disc that has cellophane tape or sticker
adhesive on it.
On cleaning discs, disc/lens cleaners
Do not use cleaning discs or disc/lens cleaners
(including wet or spray types). These may
cause the recorder to malfunction.
On replacement of parts
In the event that this unit is repaired, repaired parts
may be collected for reuse or recycling purposes.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 audio tracks, JPEG image
files, or DivX video files that the
recorder can play
Notes on MP3 Audio
Tracks, JPEG Image Files,
DivX Video Files, and i.Link
The recorder can play the following tracks and
files:
– MP3 audio tracks with the extension “.mp3.”
– JPEG image files with the extension “.jpeg” or
“.jpg.”
– DivX video files with the extension “.avi” or
“.divx.”
About MP3 audio tracks, JPEG
image files, and DivX video files
MP3 is an audio compression technology that
satisfies certain ISO/MPEG regulations. JPEG is
an image compression technology.
z Hint
You can play MP3 (MPEG1 Audio Layer 3)
format audio tracks on DATA CDs (CD-ROMs/
CD-Rs/CD-RWs) or DATA DVDs (DVD-ROMs/
DVD-RWs/DVD-Rs/DVD+RWs/DVD+Rs/
DVD-RAMs) or play JPEG image files on DATA
CDs (CD-ROMs/CD-Rs/CD-RWs) or DATA
DVDs (DVD-ROMs/DVD-RWs/DVD-Rs).
Since a disc with many trees takes longer to start
playback, it is recommended that you create albums with
no more than two trees.
b Notes
• The recorder will play any data with the extension
“.mp3,” “.jpeg,” “.jpg,” “.avi,” or “.divx” even if they
are not in MP3, JPEG, or DivX format. Playing these
data may generate a loud noise which could damage
your speaker system.
®
DivX is a video file compression technology,
developed by DivX, Inc. This product is an
®
official DivX Certified product. You can play
• Depending on the disc, normal playback may not be
possible. For example, the picture may be unclear,
playback may not appear smooth, the sound may skip,
and so on.
• Depending on the disc, playback may take some time
to start.
DATA CDs (CD-ROMs/CD-Rs/CD-RWs) and
DATA DVDs (DVD-ROMs/DVD+RWs/
DVD+Rs/DVD-RWs/DVD-Rs/DVD-RAMs)that
contain DivX video files.
DATA DVDs must be recorded according to
ISO9660 Level 1 or Level 2 format for the
recorder to recognise the MP3 tracks, JPEG image
files, and DivX video files.
• Some files cannot be played.
• For MP3 audio tracks and DivX video files, the
recorder can play up to a total number of 650 albums
and files.
DATA CDs must be recorded according to
ISO9660 Level 1, Level 2, or Joliet format for the
recorder to recognise the MP3 tracks, JPEG image
files, and DivX video files.
You can also play discs recorded in MultiSession/
Border.
Refer to the instructions supplied with the disc
drives and the recording software (not supplied)
for details on the recording format.
• For JPEG image files, the recorder can load up to a total
number of 650 albums and files on a DATA CD/DATA
DVD or the connected USB device at a time. To view
unloaded albums, reload them.
• For DivX video files, the recorder can play video files
up to 30 frames/sec.
• Subtitle files for DivX video files support the extension
“.smi,” “.srt,” “.sub,” or “.txt.”
• Proceeding to the next or another album may take some
time.
• The image size that can be displayed is limited. The
following image sizes can be displayed: width 6,000
pixels by height 4,499 pixels (less than 4 MB).
• This recorder supports MP3 audio tracks recorded with
a sampling frequency of 32 kHz, 44.1 kHz, and 48 kHz.
• No more than a 1 GB MP3 audio track can be played.
• The recorder does not conform to audio tracks in
mp3PRO format.
Note on MultiSession/Border discs
If audio tracks and images in Music CD format or
Video CD format are recorded in the first session/
border, only the first session/border will be played
back.
• The recorder cannot play a DivX video file of a size
larger than 720 (width) × 576 (height)/4 GB.
• The recorder may not play a DivX video file when the
file has been combined from two or more DivX video
files.
• The recorder does not support DivX DRM.
,continued
85
Download from Www.Somanuals.com. All Manuals Search And Download.
About i.LINK
Specifications
The DV IN jack on this recorder is i.LINK-
compliant for digital video cameras.
System
Laser: Semiconductor laser
Channel coverage:
i.LINK is a more familiar term for IEEE 1394 data
transport bus proposed by SONY, and is a
trademark approved by many corporations.
IEEE 1394 is an international standard
standardized by the Institute of Electrical and
Electronics Engineers.
For details on how to dub when this recorder is
connected to other video equipment having DV
The DV IN jack on this recorder can only input
DVC-SD signals. It cannot output signals. The DV
IN jack will not accept MICRO MV signals from
equipment such as a MICRO MV digital video
camera with an i.LINK jack.
For details on precautions when connecting this
recorder, also refer to the instruction manuals for
the equipment to be connected.
PAL (B/G, D/K, I)/SECAM (L)
VHF: E2 to E12, R1 to R12, F2 to F10,
Italian A to H, Ireland A to J, South Africa
4 to 11, 13
UHF: E21 to E69, R21 to R69, B21 to B69,
F21 to F69
CATV: S01 to S05, S1 to S20, France B to
Q
HYPER: S21 to S41
The above channel coverage merely ensures the
channel reception within these ranges. It does not
guarantee the ability to receive signals in all
circumstances. The channels that can be received
differ depending on the country/region.
b Note
Video reception: Frequency synthesizer
system
Audio reception: Split carrier system
Aerial out: 75-ohm asymmetrical aerial
socket
Timer: Clock: Quartz locked/Timer
indication: 24-hour cycle (digital)
Video recording format: MPEG-2
Audio recording format/applicable bit
rate: Dolby Digital 2 ch
Normally, only one piece of equipment can be connected
to this recorder by the i.LINK cable (DV connecting
cable). When connecting this recorder to i.LINK-
compatible equipment having two or more i.LINK jacks
(DV jacks), refer to the instruction manual of the
equipment to be connected.
i.LINK and are trademarks.
256 kbps (in HQ and SP mode), 192 kbps
(in LP and EP mode), 96 kbps (in ULP
mode)
Inputs and outputs
AUDIO OUT: Phono jack/2 Vrms/600 ohms
LINE 2 IN
(AUDIO): Phono jack/2 Vrms/more than
47 kilohms
(VIDEO): Phono jack/1.0 Vp-p
LINE 1-TV: 21-pin
CVBS IN/OUT
RGB OUT (upstream)
LINE 3/DECODER: 21-pin
CVBS IN/OUT
S-Video/RGB IN
Decoder
86
Download from Www.Somanuals.com. All Manuals Search And Download.
DV IN: 4-pin/i.LINK S100
DIGITAL OUT (COAXIAL): Phono jack/
0.5 Vp-p/75 ohms
COMPONENT VIDEO OUT
(Y, PB/CB, PR/CR):
Phono jack/Y: 1.0 Vp-p,
P
B/CB: 0.7 Vp-p, PR/CR: 0.7 Vp-p
HDMI OUT: HDMI™ Connector
USB: USB jack Type A
General
Power requirements: 220-240 V AC, 50/
60 Hz
Power consumption: 20 W
Dimensions (approx.):
430 × 53 × 258 mm (width/height/depth)
incl. projecting parts
Mass (approx.): 2.6 kg
Operating temperature: 5ºC to 35ºC
Operating humidity: 25% to 80%
Supplied accessories:
Mains lead (1)
Aerial cable (1)
Remote commander (remote) (1)
R6 (size AA) batteries (2)
Specifications and design are subject to change
without notice.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting
the aerial cable 12
F
Index
[Factory Set] 74
File 52
the audio cords 16
the USB device 26
the video cords 13
Controlling TVs with the
remote 18
Copy control signals 38
Copy-Free 38
Copy-Never 38
[Finalize] 36
[Fine] 67
Folder 52
[Format DVD] 28
Front panel 9
Words in brackets appear in the
on-screen displays.
Numerics
[16:9] 68
[4:3 Letter Box] 68
[4:3 Pan Scan] 68
[96kHz] 70
[96kHz PCM Output] 70
H
Copy-Once 38
CPRM 80
Creating chapters 59
Handling discs 84
A
D
[A-B Erase] 56
A-B Repeat 49
Aerial 12
DATA CD 81
DATA DVD 81
[Decoder On/Off] 66
DIGITAL OUT (COAXIAL)
I
i.LINK 86
Album 50
Angle 48
Initial Setup 20
[Input Disc Name] 34
Audio cord 16
[Audio DRC] 70
Audio input 16
[Auto Channel Setting] 66
Digital video camera 62
[Disc Record Mode] 72
Disc space 54
J
JPEG image files 52
DISPLAY 32
L
Display
Setup Display 65
[Divide] 57
LINE 1-TV 13
LINE 2 IN 23
[Line 3 In] 68
B
DivX 81
Batteries 18
Bilingual recordings 37
Bookmark 50
M
DV Dubbing 62
DV IN 62
DVD VIDEO 81
DVD+R 79
DVD+RW 79
DVD-R 79
DVD-RAM 81
C
Mains lead 17
[Manual CH setting] 66
MENU 45
Canal Plus 25
CD 81
Channel List 66
[Clock Setting] 67
[Combine] 59
Command Mode 19
COMPONENT VIDEO OUT
Menu
DVD’s Menu 45
Top menu 45
MP3 audio tracks 50
E
N
Editing 54
Enter characters 33
[Name] 66
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Resume Play 46
O
Z
On-screen display
Setup Display 65
Sub-menu 30
OSD language 69
Zoom 48
ZWEITON 37
S
[Search] 31
Searching
locating the beginning of
the title/chapter/
P
Parts and controls 7
PAY-TV 25
[Set Password] 71
Setup Display 65
Slide show 53
[Stereo 1] 72
[Stereo 2] 72
Sub-menu 30
Super VIDEO CD 81
Surround 32
PBC (Playback Control) 46
A-B Repeat 49
instant advance 48
instant replay 48
System Menu 27
Resume Play 46
Slow-motion play 48
Progressive mode 68
[Protect] 57
T
Timer List 40
Timer recording
check/change/cancel 40
Rec Mode Adjust 39
Timer List 40
[Protect Disc] 35
Q
Quick Timer 42
Track 50
R
Rear panel 10
Troubleshooting 75
[TV Type] 68
REC MODE 37
Rec Mode Adjust 39
Recordable discs 79
overwriting a recorded
title 43
U
[Unfinalize] 36
recording format 79
recording time 37
while watching another
programme 42
V
Video cord 13
Video mode 79
[Vocal] 70
Region code 81
VR mode 79
Resetting the recorder 74
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed using VOC (Volatile Organic
Compound)-free vegetable oil based
ink.
Sony Corporation Printed in Indonesia
Download from Www.Somanuals.com. All Manuals Search And Download.
|