3-113-759-12(1)
DVD Recorder
Operating Instructions
To find out useful hints, tips and information about Sony products and
services please visit: www.sony-europe.com/myproduct
RDR-GX350
© 2007 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
On recording
Copy guard function
Make trial recordings before
making the actual recording.
Since the recorder has a copy
guard function, programmes
received through an external
tuner (not supplied) may contain
copy protection signals (copy
guard function) and as such may
not be recordable, depending on
the type of signal.
Precautions
This equipment has been tested
and found to comply with the
limits set out in the EMC
Directive using a connection
cable shorter than 3 metres.
On compensation for lost
recordings
Sony is not liable and will not
compensate for any lost
recordings or relevant losses,
including when recordings are
not made due to reasons
On safety
IMPORTANT NOTICE
Should any solid object or liquid
fall into the cabinet, unplug the
recorder and have it checked by
qualified personnel before
operating it any further.
Caution: This recorder is
capable of holding a still
video image or on-screen
display image on your
including recorder failure, or
when the contents of a recording
are lost or damaged as a result of
recorder failure or repair
undertaken to the recorder. Sony
will not restore, recover, or
replicate the recorded contents
under any circumstances.
television screen indefinitely.
If you leave the still video
image or on-screen display
image displayed on your TV
for an extended period of
time you risk permanent
damage to your television
screen. Plasma display panels
and projection televisions are
especially susceptible to this.
On power sources
• The recorder is not
disconnected from the AC
power source (mains) as long
as it is connected to the wall
outlet, even if the recorder
itself has been turned off.
• If you are not going to use the
recorder for a long time, be
sure to disconnect the recorder
from the wall outlet. To
Copyrights
• Television programmes, films,
video tapes, discs, and other
materials may be copyrighted.
Unauthorized recording of
such material may be contrary
to the provisions of the
If you have any questions or
problems concerning your
recorder, please consult your
nearest Sony dealer.
copyright laws. Also, use of
this recorder with cable
disconnect the AC power cord
(mains lead), grasp the plug
itself; never pull the cord.
television transmission may
require authorization from the
cable television transmitter
and/or programme owner.
• This product incorporates
copyright protection
technology that is protected by
U.S. patents and other
intellectual property rights.
Use of this copyright
protection technology must be
authorized by Macrovision,
and is intended for home and
other limited viewing uses
only unless otherwise
About this manual
• In this manual, “disc” is used
as a general reference for the
DVDs or CDs unless
otherwise specified by the text
or illustrations.
On placement
• Place the recorder in a location
with adequate ventilation to
prevent heat build-up in the
recorder.
• Do not place the recorder on a
soft surface such as a rug that
might block the ventilation
holes.
• Do not place the recorder in a
confined space such as a
bookshelf or similar unit.
• Do not place the recorder in a
location near heat sources, or
in a place subject to direct
sunlight, excessive dust, or
mechanical shock.
• Icons, such as
, listed
DVD
at the top of each explanation
indicate what kind of media
can be used with the function
being explained.
• Instructions in this manual
describe the controls on the
remote. You can also use the
controls on the recorder if they
have the same or similar
names as those on the remote.
• The on-screen display
authorized by Macrovision.
Reverse engineering or
disassembly is prohibited.
• This Product includes
®
FontAvenue fonts licenced
• Do not place the recorder in an
inclined position. It is
illustrations used in this
by NEC corporation.
FontAvenue is a registered
trademark of NEC
corporation.
manual may not match the
graphics displayed on your TV
screen.
• The explanations regarding
DVDs in this manual refer to
DVDs created onthis recorder.
The explanations do not apply
to DVDs that are created on
other recorders and played
back on this recorder.
designed to be operated in a
horizontal position only.
• Keep the recorder and discs
away from equipment with
strong magnets, such as
microwave ovens, or large
loudspeakers.
• Do not place heavy objects on
the recorder.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
About the HDMI Control functions for ‘BRAVIA’ Theatre Sync
(for HDMI connections only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Step 5: Preparing the Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
If you have a Sony DVD player or more than one Sony DVD
recorder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Step 6: Easy Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
®
Connecting a decoder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Setting external decoder (PAY-TV/Canal Plus analogue decoder)
programme positions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Eight Basic Operations — Getting to Know Your DVD Recorder
1. Inserting a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
2. Recording a Programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
6. Labelling and Protecting a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
8. Reformatting a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Unrecordable pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Creating chapters in a title. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Erasing and Editing a Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Erasing and Editing a Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Dividing a chapter (Divide) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Erasing a chapter (Erase) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Creating and Editing a Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Moving a Playlist title (Move). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Dividing a Playlist title (Divide) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Searching for an Audio Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
,continued
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the “Photo Album” List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Disc Settings (Disc Setup) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Recorder Settings (Basic) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Aerial Reception Settings (Tuner) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Auto Channel Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Audio Input Settings (Audio In) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Audio Output Settings (Audio Out) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
HDMI Settings (HDMI Output) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Other Settings (Options) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Resetting the Recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Notes About This Recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Notes on MP3 Audio Tracks, JPEG Image Files, and DivX Video
Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Country/Area Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Guide to Disc Types
Recordable and playable discs
Icon used
Formatting
(new discs)
Compatibility with other
DVD players (finalising)
Type
Disc Logo
in this
manual
Automatically
formatted in +VR
mode (DVD+RW
VIDEO)
Playable on DVD+RW
compatible players
(automatically finalised)
DVD+RW
+
RW
Playable only on VR mode
compatible players
(finalisation unnecessary)
VR
mode
Format in VR mode
-
RWVR
DVD-RW
Playable on most DVD
players (finalisation
necessary) (page 37)
Video
mode
Format in Video
mode (page 29)
-
RWVideo
DVD+R
Automatically
formatted in +VR
mode (DVD+R
VIDEO)
Playable on most DVD
players (finalisation
necessary) (page 37)
+
R
DVD+R DL
Format in VR mode
*1
Playable only on DVD-R
in VR mode compatible
players (finalisation
VR
mode
Formatting is
performed in the
“Format” setup
DVD-R
-
RVR
necessary) (page 37)
Automatically
formatted in Video players (finalisation
mode necessary) (page 37)
Playable on most DVD
DVD-R
DL
Video
mode
-
RVideo
,continued
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Usable disc versions (as of April 2007)
• 8x-speed or slower DVD+RWs
• 6x-speed or slower DVD-RWs (Ver.1.1,
*2
Ver.1.2 with CPRM
)
• 16x-speed or slower DVD+Rs
• 16x-speed or slower DVD-Rs (Ver.2.0,
*2
Ver.2.1 with CPRM
)
• 8x-speed or slower DVD+R DL (Double
Layer) discs
• 8x-speed or slower DVD-R DL (Dual
*2
Layer) discs (Ver.3.0 with CPRM
)
“DVD+RW,” “DVD-RW,” “DVD+R,” “DVD+R
DL,” “DVD-R,” and “DVD-R DL” are trademarks.
*1
When an unformatted DVD-R is inserted into
this recorder, it is automatically formatted in
Video mode. To format a new DVD-R in VR
*2
CPRM (Content Protection for Recordable
Media) is a coding technology that protects
copyrights for images.
Discs that cannot be recorded on
• DVD-RAMs
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Playable discs
Icon used in
this manual
Type
Disc Logo
Characteristics
Discs such as movies that can be
purchased or rented
DVD VIDEO
This recorder also recognises DVD-
RAMs* as DVD Video compatible
discs.
DVD
VIDEO CDs or CD-Rs/CD-RWs in
VIDEO CD/Super VIDEO CD format
VIDEO CD
CD
VCD
CD
Music CDs or CD-Rs/CD-RWs in
music CD format
DVD+RWs/DVD+Rs/DVD-RAMs*
containing MP3 audio tracks or DivX
video files
DVD-RWs/DVD-Rs/DVD-ROMs
containing MP3 audio tracks, JPEG
image files or DivX video files
DATA DVD
DATA CD
—
—
DATA DVD
DATA CD
CD-ROMs/CD-Rs/CD-RWs
containing either MP3 audio tracks,
JPEG image files or DivX video files
“DVD VIDEO” and “CD” are trademarks.
• DVD-ROMs/DVD+RWs/DVD-RWs/
DVD+Rs/DVD-Rs that do not contain
DVD Video, DivX video, JPEG image
files, or MP3 audio tracks.
DivX, DivX Certified, and associated logos are
trademarks of DivX, Inc. and are used under
license.
• DVD Audio discs
®
DivX is a video file compression technology,
• Cartridge-only type DVD-RAMs.
• HD layer on Super Audio CDs
• DVD VIDEOs with a different region code
developed by DivX, Inc.
* If the DVD-RAM has a removable cartridge,
remove the cartridge before playback.
• DVDs that were recorded on a different
recorder and not correctly finalised.
Discs that cannot be played
• PHOTO CDs
• CD-ROMs/CD-Rs/CD-RWs that are
recorded in a format different from the
formats mentioned in the table above.
• Data part of CD-Extras
• BDs
• HD DVDs
• Discs recorded with an AVCHD-
compatible DVD video camera
Maximum recordable number of titles
Disc
Number of titles
DVD-RW/DVD-R
DVD+RW/DVD+R
DVD+R DL
99
49
49
99
DVD-R DL
,continued
9
Download from Www.Somanuals.com. All Manuals Search And Download.
b Notes
Note on playback operations of DVD
VIDEOs/VIDEO CDs
• Some DVD+RWs/DVD+Rs, DVD-RWs/DVD-
Rs, DVD-RAMs, or CD-RWs/CD-Rs cannot be
played on this recorder due to the recording
quality or physical condition of the disc, or the
characteristics of the recording device and
authoring software. The disc will not play if it has
not been correctly finalised. For more
information, see the operating instructions for the
recording device.
• You cannot mix VR mode and Video mode on the
same DVD-RW. To change the disc’s format,
contents will be erased after reformatting.
• You cannot shorten the time required for
recording even with high-speed discs.
• It is recommended that you use discs with “For
Video” printed on their packaging.
• You cannot add new recordings to DVD+Rs,
DVD-Rs, or DVD-RWs (Video mode) that
contain recordings made on other DVD
equipment.
• In some cases, you may not be able to add new
recordings to DVD+RWs that contain recordings
made on other DVD equipment. If you do add a
new recording, note that this recorder will rewrite
the DVD menu.
Some playback operations of DVD VIDEOs/
VIDEO CDs may be intentionally set by
software producers. Since this recorder plays
DVD VIDEOs/VIDEO CDs according to the
disc contents the software producers
designed, some playback features may not be
available. See the instructions supplied with
the DVD VIDEOs/VIDEO CDs.
Region code (DVD VIDEO only)
Your recorder has a region code printed on
the rear of the unit and will only play DVD
VIDEOs (playback only) labelled with
identical region codes. This system is used to
protect copyrights.
DVD VIDEOs labelled
on this recorder.
will also play
ALL
If you try to play any other DVD VIDEO, the
message “Playback prohibited by region
code.” will appear on the TV screen.
Depending on the DVD VIDEO, no region
code indication may be labelled even though
playing the DVD VIDEO is prohibited by
area restrictions.
• You cannot edit recordings on DVD+RWs,
DVD-RWs (Video mode), DVD+Rs, or DVD-Rs
that are made on other DVD equipment.
• If the disc contains PC data unrecognizable by
this recorder, the data may be erased.
Region code
• You may not be able to record, edit, or dub on
some recordable discs, depending on the disc.
• Do not insert any discs that cannot be recorded or
played on this recorder. This may cause the
recorder to malfunction.
Music discs encoded with copyright
protection technologies
This product is designed to play back discs
that conform to the Compact Disc (CD)
standard.
Recently, various music discs encoded with
copyright protection technologies are being
marketed by some record companies. Please
be aware that among those discs, there are
some that do not conform to the CD standard
and may not be playable by this product.
Note on DualDiscs
A DualDisc is a two sided disc product which
mates DVD recorded material on one side
with digital audio material on the other side.
However, since the audio material side does
not conform to the Compact Disc (CD)
standard, playback on this product is not
guaranteed.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Hookups and Settings
Hooking Up the Recorder
Follow steps 1 through 6 to hook up and adjust the settings of the recorder. Do not connect the
b Notes
• Plug in cords securely to prevent unwanted noise.
• Refer to the instructions supplied with the components to be connected.
• You cannot connect this recorder to a TV that does not have a SCART or video input jack.
• Be sure to disconnect the mains lead of each component before connecting.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1: Connecting the Aerial Cable
Connect the aerial cable by following the steps below.
Wall
to AERIAL IN
DVD recorder
TV
to AERIAL OUT
to aerial input
Aerial cable (supplied)
: Signal flow
1 Disconnect the aerial cable from your TV, and connect it to AERIAL IN on the rear
panel of the recorder.
2 Connect AERIAL OUT of the recorder to the aerial input of your TV using the supplied
aerial cable.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2: Connecting the Video Cords/HDMI Cord
Select one of the following patterns, A through E, according to the input jack on your TV
monitor, projector, or audio component such as an AV amplifier (receiver). This will enable
you to view pictures.
B
A
TV
Audio/video
cord (not
supplied)
TV, projector, or audio
component
to LINE 2 OUT
(VIDEO)
SCART cord (not supplied)
(yellow)
to T LINE 3 – TV
DVD recorder
to LINE 2 OUT
(S VIDEO)
to HDMI OUT
(blue)
(red)
(green)
to COMPONENT
VIDEO OUT
Component video
cord (not supplied)
S-video cord
(not supplied)
HDMI cord
(not supplied)
(blue)
(red)
(green)
C
D
E
TV, projector, or audio
component
TV, projector, or audio
component
TV, projector, or audio
component
: Signal flow
,continued
13
Download from Www.Somanuals.com. All Manuals Search And Download.
A SCART input jack
When connecting to the HDMI jack
Follow the steps below. Improper handling
may damage the HDMI jack and the
connector.
When setting “LINE 3 Out” to “S-Video” or
“RGB” in the “Video In/Out” setup
(page 80), use a SCART cord that conforms
to the selected signal.
1
Carefully align the HDMI jack on the
rear of the recorder and the HDMI
connector by checking their shapes.
Make sure the connector is not upside
down or tilted.
B Video input jack
You will enjoy standard quality images.
C S VIDEO input jack
You will enjoy high quality images.
D Component video input jacks (Y, PB/CB,
PR/CR)
You will enjoy accurate colour reproduction
and high quality images.
If your TV accepts progressive 525p/625p
format signals, use this connection and set
“Progressive” to “Compatible” in the “Easy
Connector is upside
down
Not straight
2
Insert the HDMI connector straight into
the HDMI jack.
“Component Video Out” to “Progressive” in
the “Video In/Out” setup to send progressive
video signals. For details, see “Component
Do not bend or apply pressure to the
HDMI connector.
E HDMI input jack
Use a certified HDMI cord (not supplied) to
enjoy high quality digital picture and sound
through the HDMI OUT jack.
b Notes
When connecting a Sony TV that is
compatible with the HDMI control function,
To see the signals from the connected set top
box receiver when the set top box receiver is
connected to the recorder using a SCART
cord only, turn the recorder on.
• Be sure to disconnect the HDMI cord when
moving the recorder.
• Do not apply too much pressure to the cabinet
wall, if you place the recorder on the cabinet with
the HDMI cord connected. It may damage the
HDMI jack or the HDMI cord.
• Do not twist the HDMI connector while
connecting to or disconnecting from the HDMI
jack to avoid damaging the HDMI jack and
connector.
When playing “wide screen” images
Some recorded images may not fit your TV
screen. To change the picture size, see
If you are connecting to a VCR
Connect your VCR to the LINE 1/
14
Download from Www.Somanuals.com. All Manuals Search And Download.
b Notes
b Notes
• Do not connect more than one type of video cord
between the recorder and your TV at the same
time.
• For correct SMARTLINK connection, you will
need a SCART cord that has the full 21 pins.
Refer to your TV’s instruction manual as well for
this connection.
• Do not make connections A and E at the same
time.
• Not all TVs respond to the functions above.
• When you connect the recorder to your TV via the
SCART jacks, the TV’s input source is set to the
recorder automatically when you start playback.
If necessary, press the TV t button on the
remote to return the input to the TV.
• If you connect the recorder to a TV with
SMARTLINK, set “LINE 3 Out” to “Video” in
the “Video In/Out” setup.
*1
“MEGALOGIC” is a registered trademark of
Grundig Corporation.
“EASYLINK” and “CINEMALINK” are
trademarks of Philips Corporation.
“Q-Link” and “NexTView Link” are trademarks
of Panasonic Corporation.
“EURO VIEW LINK” is a trademark of Toshiba
*2
*3
*4
• You cannot connect the HDMI OUT jack
(connection E) to DVI jacks that are not HDCP
compliant (e.g., DVI jacks on PC displays).
• Component video and RGB signals are not output
when using the HDMI connection.
Corporation.
“T-V LINK” is a trademark of JVC Corporation.
*5
About the HDMI Control
functions for ‘BRAVIA’ Theatre
Sync (for HDMI connections
only)
* This DVD recorder incorporates High-Definition
Multimedia Interface (HDMI™) technology.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
By connecting Sony components that are
compatible with the HDMI Control function
with an HDMI cord (not supplied), operation
is simplified as below:
• One-Touch Play (page 53)
• System Power-Off
When you turn the TV off by using the
power button on the TV’s remote, the
components compatible with the HDMI
Control function turn off automatically.
About the SMARTLINK
features (for SCART
connections only)
If the connected TV (or other connected
equipment such as a set top box) complies
*3
with SMARTLINK, NexTView Link
,
*1
*2
MEGALOGIC , EASYLINK
,
*2
*3
To prepare for the ‘BRAVIA’ Theatre Sync
features
Set “HDMI Control” to “On” in the “HDMI
settings, refer to the operating instructions
supplied with the TV.
CINEMALINK , Q-Link , EURO VIEW
*4
*5
LINK , or T-V LINK , you can enjoy the
following SMARTLINK features.
• One-Touch Play (page 53)
• Preset Download
You can download the tuner preset data
from your TV to this recorder, and tune the
recorder according to that data in “Easy
Setup.”
• NexTView Download
You can easily set the timer by using the
NexTView Download function on your TV.
b Notes
• Depending on the connected component, the
HDMI Control function may not work. Refer to
the operating instructions supplied with the
component.
• The recorder supports only the playback option of
HDMI Control. “Player” appears on the TV
screen when using the HDMI Control functions.
To prepare for the SMARTLINK features
Set “LINE 3 Out” to “Video” in the “Video
to “This Recorder Only” in the “Options”
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3: Connecting the Audio Cords/HDMI Cord
Select one of the following patterns, A or B, according to the input jack on your TV monitor,
projector, or audio component such as an AV amplifier (receiver). This will enable you to listen
to sound.
[Speakers]
Rear (L)
[Speakers]
Rear (R)
A
Audio component with
a decoder
Front (L)
Front (R)
Centre
Subwoofer
or
to coaxial/HDMI digital input
HDMI cord
(not supplied)
Coaxial digital cord
(not supplied)
to HDMI OUT
to DIGITAL OUT (COAXIAL)
to LINE 2 OUT (R-AUDIO-L)
DVD recorder
INPUT
B
VIDEO
(white)
(yellow)
L
(red)
(white)
AUDIO
Audio/video cord
(not supplied)
R
(yellow)*
(red)
TV, projector, or
audio component
: Signal flow
If you connect a Sony audio component that
is compatible with the HDMI control
function, refer to the operating instructions
supplied with the audio component.
A Digital audio input jack
*1
If your audio component has a Dolby
*2
Digital, DTS , or MPEG audio decoder and
a digital input jack, use this connection. You
can enjoy Dolby Digital (5.1ch), DTS
(5.1ch), and MPEG audio (5.1ch) surround
effects.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
B Audio L/R (left/right) input jacks
This connection will use your TV’s or audio
component’s two speakers for sound.
Step 4: Connecting the
Mains Lead
z Hint
For correct speaker location, see the operating
instructions supplied with the connected
components.
Connect the supplied mains lead to the AC IN
terminal of the recorder. Then plug the
recorder and TV mains leads (AC power
cords) into the mains. After you connect the
mains lead, you must wait for a short
while before operating the recorder.
You can operate the recorder once the front
panel display lights up and the recorder enters
standby mode.
b Notes
• Do not connect your TV’s audio output jacks to
the LINE IN (R-AUDIO-L) jacks at the same
time. This will cause unwanted noise to come
from your TV’s speakers.
• With connection B, do not connect the LINE IN
(R-AUDIO-L) and LINE 2 OUT (R-AUDIO-L)
jacks to your TV’s audio output jacks at the same
time. This will cause unwanted noise to come
from your TV’s speakers.
If you connect additional equipment to this
mains lead after all connections are complete.
• With connection A, after you have completed the
connection, make the appropriate settings in the
sound or a loud noise will come from your
speakers.
• When you connect the recorder to an audio
component using an HDMI cord, you will need to
do one of the following:
to AC IN
1
– Connect the audio component to the TV with
the HDMI cord, or
2
– Connect the recorder to the TV with a video
cord other than HDMI cord (component video
cord, S-video cord, or audio/video cord).
to mains
*1
Manufactured under license from Dolby
Laboratories.
“Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Out” are registered
*2
trademarks of DTS, Inc.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling TVs with the
remote
Step 5: Preparing the
Remote
You can adjust the remote’s signal to control
your TV.
You can control the recorder using the
supplied remote. Insert two R6 (size AA)
batteries by matching the 3 and # ends on
the batteries to the markings inside the
battery compartment. When using the
b Notes
• Depending on the connected unit, you may not be
able to control your TV with some or all of the
buttons below.
remote, point it at the remote sensor
recorder.
on the
• If you enter a new code number, the code number
previously entered will be erased.
Number
buttons
TV/DVD
b Notes
• If the supplied remote interferes with your other
Sony DVD recorder or player, change the
command mode number for this recorder
DISPLAY
• Use the batteries correctly to avoid possible
leakage and corrosion. Should leakage occur, do
not touch the liquid with bare hands. Observe the
following:
TV [/1
TV t
TV 2 +/–
– Do not use a new battery with an old battery, or
batteries of different manufacturers.
– Do not attempt to recharge the batteries.
– If you do not intend to use the remote for an
extended period of time, remove the batteries.
– If battery leakage occurs, wipe out any liquid
inside the battery compartment, and insert new
batteries.
TV PROG
+/–
1 Hold down TV [/1 located at the
bottom of the remote.
Do not press the [/1 button at the top of
the remote.
• Do not expose the remote sensor (marked
the front panel) to strong light, such as direct
on
2 With TV [/1 pressed down, enter the
TV’s manufacturer code using the
number buttons.
sunlight or a lighting apparatus. The recorder may
not respond to the remote.
• When you replace the batteries of the remote, the
code number and Command Mode may be reset
to the default setting. Set the appropriate code
number and Command Mode again.
For instance, to enter “09,” press “0” then
“9.” After you enter the last number,
release the TV [/1 button.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Code numbers of controllable TVs
If more than one code number is listed,
try entering them one at a time until you
find the one that works with your TV.
If you have a Sony DVD player
or more than one Sony DVD
recorder
Manufacturer
Sony
Code number
If the supplied remote interferes with your
other Sony DVD recorder or player, set the
command mode number for this recorder and
the supplied remote to one that differs from
the other Sony DVD recorder or player after
The default command mode setting for this
recorder and the supplied remote is DVD3.
You can check the current Command Mode
in the front panel display. For details, see
01 (default)
Hitachi
24
JVC
33
Panasonic
Philips
17, 49
06, 08
71
Samsung
Sanyo
25
Thomson
Toshiba
43
The default command mode setting for this
recorder and the supplied remote is DVD3.
The remote does not function if different
command modes are set for the recorder and
remote. Set the same command mode.
38
The remote performs the following:
Buttons
Operations
TV [/1
Turns your TV on or
off.
Changing programme positions
of the recorder using the
remote
TV 2 (volume) Adjusts the volume
+/–
of your TV.
TV PROG +/–
Selects the
programme position
on your TV.
You can change programme positions of the
recorder using the number buttons.
TV t (input
select)
Switches your TV’s
input source.
Number
buttons
To operate the TV/DVD button
(for SCART connections only)
The TV/DVD button switches between TV
mode and DVD mode. Press the TV/DVD
button when in stop mode or no menu appears
on the TV screen. Point your remote at the
recorder when using this button.
TV mode: switch to this when you use the
TV’s tuner mainly. When you start playback,
the input source for the TV is set to the
recorder automatically.
ENTER
DVD mode: switch to this when you use the
recorder’s tuner mainly.
To check the current mode, press DISPLAY
Example: for channel 50
Press “5,” “0,” then press ENTER.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Channel Setting
If you connect a TV to this recorder not
using SMARTLINK, select “Auto
Scan.” Then select your country/region
using </,, and press ENTER. The
programme position order will be set
according to the country/region you
select.
Step 6: Easy Setup
Make the basic adjustments by following the
on-screen instructions in “Easy Setup.”
Be careful not to disconnect the cables or exit
the “Easy Setup” function during this
procedure.
If you connect a TV to this recorder with
SMARTLINK, select “Download from
TV.” Then select your country/region
using </,, and press ENTER. The
tuner preset data will be downloaded
from your TV to this recorder. (For
details, refer to the operating instructions
supplied with your TV.)
[/1
To skip this setting, select “Do not set.”
To set the programme positions
</M/m/,,
ENTER
O
RETURN
Clock Setting
Select “Auto” when a programme
position in your local area broadcasts a
time signal. The “Auto Clock Setting”
display appears.
TV [/1
1
Select the programme position of the
station that carries a time signal
using </,.
1 Turn on the recorder and your TV.
Then switch the input selector on your
TV so that the signal from the recorder
appears on your TV screen.
2
Select “Start” using m, and press
ENTER.
If a clock signal cannot be found,
press O RETURN, and set the
clock manually.
The “Language” display appears.
• If the “Language” display does not
appear, select “Easy Setup” in the
“Basic” setup from “Initial Setup” in
Select “Manual” to set the clock
manually. The “Manual Clock Setting”
display appears.
2 Select a language for the on-screen
displaysusing</M/m/,, and press
ENTER.
1
Select the time zone for your area
using </,, and press m.
2
Select “On” using </, if you are
now on summer time, and press
ENTER.
The initial settings message appears.
3 Select “Start” using M/m, and press
3
Set the day, month, year, hour, and
minutes using </M/m/,, and
press ENTER to start the clock.
ENTER.
Follow the on-screen instructions to
make the following settings.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Screen Size (page 87)
If you have a wide-screen TV, select
“Wide (16:9).” If you have a standard
TV, select “Standard (4:3).” This will
determine how “wide-screen” images are
displayed on your TV.
Setting Up the VIDEO
®
Plus+ System
Setting up your recorder involves
Progressive
coordinating the TV programme position (the
number you turn to on your TV or recorder to
watch a programme) with the guide channel
(the number that’s assigned to that channel in
your TV programme guide).
When you connect a progressive format
TV to this recorder using the
COMPONENT VIDEO OUT jacks,
select “Compatible.”
To find the guide channel numbers, look at
the “Channel Line-up Chart” in the
programme guide for your area that features
PlusCode numbers.
4 Select “Finish Setup” using M/m, and
press ENTER.
“Easy Setup” is completed.
Use the Channel Line-up Chart to coordinate
the guide channel number with the TV
programme position.
To return to the previous step
Press O RETURN.
z Hint
If you want to run “Easy Setup” again, select “Easy
Setup” in the “Basic” setup from “Initial Setup” in
SYSTEM
MENU
</M/m/,,
ENTER
O
RETURN
.
>
1 Press SYSTEM MENU while the
recorder is stopped.
2 Select “Initial Setup,” and press
ENTER.
3 Select “Tuner,” and press ENTER.
4 Select “Set VIDEO Plus+ CH,” and
press ENTER.
,continued
21
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Select “Next Screen,” and press
ENTER.
6 Select the guide channel number
assigned in the program guide using
M/m.
To go to the next/previous page, press
./>.
7 Select “Preset” (the TV channel
number or station name) using </
,.
8 Repeat steps 6 and 7 for each guide
channel number that does not match
the TV channel number.
9 Press SYSTEM MENU to exit the
menu.
To return to the previous step
Press O RETURN.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a VCR or Similar Device
After disconnecting the recorder’s mains lead from the mains, connect a VCR or similar
recording device to the LINE IN jacks of this recorder.
For details, refer to the instruction manual supplied with the connected equipment.
To record on this recorder, see “Recording from Connected Equipment” on page 49.
Connecting to the LINE 1/DECODER jack
Connect a VCR or similar recording device to the LINE 1/DECODER jack of this recorder.
TV
VCR
SCART cord (not supplied)
to SCART input
to i LINE 1/DECODER
to T LINE 3 – TV
DVD recorder
b Notes
• Pictures containing copy protection signals that prohibit any copying cannot be recorded.
• If you pass the recorder signals through a VCR, you may not receive a clear image on your TV screen.
DVD recorder
VCR
TV
Be sure to connect your VCR to the DVD recorder and to your TV in the order shown below. To watch
video tapes, watch the tapes through a second line input on your TV.
Line input 1
VCR
DVD recorder
TV
Line input 2
• The SMARTLINK features are not available for devices connected via the DVD recorder’s LINE 1/
DECODER jack.
• To watch the connected VCR or similar device’s pictures through the recorder while the recorder is in
• When you record to a VCR from this DVD recorder, do not switch the input source to TV by pressing the
TV/DVD button on the remote.
• If you disconnect the recorder’s mains lead, you will not be able to view the signals from the connected
VCR.
,continued
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to the LINE 2 IN jacks on the front panel
Connect a VCR or similar recording device to the LINE 2 IN jacks of this recorder. If the
equipment has an S-video jack, you can use an S-video cord instead of an audio/video cord.
VCR, etc.
OUTPUT
VIDEO
AUDIO
S VIDEO
L
R
S-video cord
(not supplied)
Audio/video cord
(not supplied)
to LINE 2 IN
DVD recorder
: Signal flow
z Hint
When the connected equipment outputs only monaural sound, connect to only the L(MONO) and VIDEO
input jacks on the front of the recorder. Do not connect the R input jack.
b Notes
• Do not connect the yellow LINE IN (VIDEO) jack when using an S-video cord.
• Do not connect the output jack of this recorder to another equipment’s input jack with the other
equipment’s output jack connected to the input jack of this recorder. This may cause noise (feedback).
• Do not connect more than one type of video cord between the recorder and your TV at the same time.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Satellite or Digital Tuner
Connect a satellite or digital tuner to this recorder using the LINE 1/DECODER jack.
Disconnect the recorder’s mains lead from the mains when connecting the tuner.
To use the Synchro Rec function, see below.
connection.
Satellite tuner,
CanalSat, etc.
TV
SCART cord (not supplied)
to SCART input
to i LINE 1/DECODER
to T LINE 3 – TV
DVD recorder
b Notes
If the satellite tuner can output RGB
signals
• Synchro-Recording does not work with some
tuners. For details, see the tuner’s operating
instructions.
This recorder accepts RGB signals. If the
satellite tuner can output RGB signals,
connect the TV SCART connector on the
satellite tuner to the LINE 1/DECODER jack,
and set “LINE 1 In” to “RGB” in the “Video
supplied with the set top box receiver.
• If you disconnect the recorder’s mains lead, you
will not be able to view the signals from the
connected tuner.
If you want to use the Synchro Rec
function
This connection is necessary to use the
Synchro-Recording function. See
Set “LINE 1 In” in the “Video In/Out” setup
(page 80) according to the specifications of
your satellite tuner. See your satellite tuner’s
instructions for more information.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting an External Decoder
You can watch or record external decoder (PAY-TV/Canal Plus analogue decoder)
programmes if you connect a decoder (not supplied) to the recorder. Disconnect the recorder’s
mains lead from the mains when connecting the decoder. Note that when you set “LINE 1 In”
to “Decoder” in step 7 of “Setting external decoder (PAY-TV/Canal Plus analogue decoder)
programme positions” (page 27), you will not be able to select “L1” because Line 1 will
become a dedicated line for the decoder.
Connecting a decoder
External decoder (PAY-TV/
Canal Plus analogue decoder)
TV
to AERIAL IN
Aerial cable
(supplied)
to SCART input
SCART cord
(not supplied)
SCART cord
(not supplied)
to T LINE 3 – TV
to AERIAL OUT
to i LINE 1/DECODER
DVD recorder
26
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Select “LINE 3 Out,” and press
ENTER.
Setting external decoder (PAY-
TV/Canal Plus analogue
decoder) programme positions
To watch or record PAY-TV/Canal Plus
analogue programmes, set your recorder to
receive the programme positions using the
on-screen display.
In order to set the programme positions
correctly, be sure to follow all of the steps
below.
5 Press M/m to select “Video” or
“RGB,” and press ENTER.
6 Select “LINE 1 In,” and press ENTER.
Number
buttons
SYSTEM
MENU
</M/m/,,
ENTER
O
RETURN
7 Press M/m to select “Decoder,” and
.
>
press ENTER.
8 Press O RETURN to return the cursor
to the left column.
1 Press SYSTEM MENU.
9 Select “Tuner,” and press ENTER.
The System Menu appears.
2 Select “Initial Setup,” and press
ENTER.
10 Select “Manual CH Setting,” and
press ENTER.
11 Select “Next Screen,” and press
ENTER.
3 Select “Video In/Out,” and press
ENTER.
,continued
27
Download from Www.Somanuals.com. All Manuals Search And Download.
b Notes
12 Select your country/region, and press
ENTER.
• If you disconnect the recorder’s mains lead, you
will not be able to view the signals from the
connected decoder.
Programme position
• To watch the connected external decoder (PAY-
TV/Canal Plus analogue decoder) programmes
during recording, press the PROGRAM + button
on the recorder (“SCART THRU” appears on the
front panel display). To return to the previous
display, press the PROGRAM – button on the
recorder (“SCART NORM” appears on the front
panel display). The recorder automatically
switches to the programme tuned by the
recorder’s tuner after the recording has finished.
To watch the connected external decoder (PAY-
TV/Canal Plus analogue decoder) programmes
while the recorder is in standby mode, set “Power
Save” to “Off” (default) in the “Basic” setup
13 Select the desired programme
position using ./> or number
buttons.
14 Select “Channel” using M/m.
15 Select the external decoder
programme position using </,.
16 Select “Sound System” using M/m.
17 Press </, to select an available TV
system, B/G, D/K, I, or L.
To receive broadcasts in France, select
“L.”
18 Select “Decoder” using M/m.
19 Select “On” using </,, and press
ENTER.
To return to the previous step
Press O RETURN.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Eight Basic Operations
2. Recording a
Programme
— Getting to Know Your DVD Recorder
1. Inserting a Disc
+
RW
-
-
+
R
-
RVR
RWVR RWVideo
-
+
+
R
RVideo
-
-
-
RW
RWVR RWVideo
RVR
-
RVideo
DVD VCD CD
DATA DVD
This section introduces the basic operation to
record a current TV programme to a disc
(DVD). For an explanation of how to make
DATA CD
Z (open/
close)
PROG +/–
TV/DVD
1 Press Z (open/close), and place a
disc on the disc tray.
DISPLAY
z REC
X REC
PAUSE
REC MODE
x REC
STOP
TV t
Recording/playing side facing down
2 Press Z(open/close) to close the disc
tray.
1 Insert a recordable DVD.
Wait until “LOAD” disappears from the
front panel display.
Unused DVDs are formatted
automatically.
2 Press PROG +/– to select the
programme position or input source
you want to record.
• For DVD-RW discs
DVD-RWs are formatted in the
recording format (VR mode or Video
mode) set by “Format DVD-RW” of
“Basic” in the “Disc Setup” setup
• For DVD-R discs
DVD-Rs are automatically formatted in
Video mode. To format an unused
DVD-R in VR mode, format the disc in
you make a recording.
If the disc is recordable on this recorder,
you can manually re-format the disc to
,continued
29
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Press REC MODE repeatedly to select
the recording mode.
Checking the disc status while
recording
Each time you press the button, the
display on the TV screen changes as
follows:
You can check the recording information
such as recording time or disc type.
Press DISPLAY during recording.
The recording information appears.
* Available when “Manual Rec. Mode” is set
to “On (go to setup)” in the “Recording”
For more details about the recording
4 Press z REC.
Recording starts.
Recording stops when the DVD is full.
To stop recording
Press x REC STOP.
Note that it may take a few seconds for
recorder to stop recording.
A Recording status
B Current selected recording mode
(maximum DVD recording time)
To pause recording
Press X REC PAUSE.
To restart recording, press the button again.
C Title number and recording elapsed
time
To watch another TV programme while
recording
D Remaining time
If your TV is connected to the T LINE 3 –
TV jack, set your TV to the TV input using
the TV/DVD button and select the
programme you want to watch. If your TV is
connected to the LINE 2 OUT or
COMPONENT VIDEO OUT jacks, set the
TV to TV input using the TV t button
E Station name and programme position
number
F Audio setting for the current
programme
G Recording restrictions for the current
programme
b Notes
I Disc type/format
• If you press the [/1 button while recording, the
recorder stops recording and turns off.
• After pressing the z REC button, it may take a
short while to start recording.
Press DISPLAY to turn off the display.
• You cannot change the recording mode while
recording.
• If there is a power failure, the programme you are
recording may be erased.
• You cannot watch a PAY-TV/Canal Plus
programme while recording another PAY-TV/
Canal Plus programme.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
4-Title List (Example: DVD-RW in VR
mode)
3. Playing the Recorded
Programme (Title List)
+
RW
-
-
+
R
-
RVR
RWVR RWVideo
-
RVideo
To play a recorded title, select the title from
the Title List.
m
8-Title List
PLAY
MODE
TITLE LIST
</M/m/,,
ENTER
O RETURN
.
>
x
H
X
A Total number of titles
B Sub-menu:
Press , to display the sub-menu.
The sub-menu displays options
applicable only to the selected item. The
displayed options differ depending upon
the model, situation, and disc type.
1 Insert a DVD.
Playback starts automatically depending
on the disc.
2 Press TITLE LIST.
To show the 8-Title List, press < to
select “Title View,” and press ENTER,
then select “8 Titles” using M/m, and
press ENTER.
Sub-menu
C Scroll bar:
Appears when all of the titles do not fit
on the list. To view the hidden titles,
press M/m.
,continued
31
Download from Www.Somanuals.com. All Manuals Search And Download.
D Title information:
To change a title thumbnail picture
(Thumbnail)
After recording, the first scene of the
recording (the title) is automatically set as the
thumbnail picture.
Displays the title number, title thumbnail
picture (playback picture for the selected
title, still images for the other titles),
recording date, title name, and title size.
You can select a favourite scene for the
thumbnail picture shown in the Title List.
: Indicates protected title.
E Remaining time of the current disc in
the current recording mode (example:
SP mode)
1
Press TITLE LIST.
For DVD-RWs/DVD-Rs (VR mode),
switch the Title Lists, if necessary.
2
3
4
Select a title, and press ,.
F Detailed information for the selected
The sub-menu appears.
title
Select “Edit” using M/m, and press
ENTER.
3 Select a title using M/m, and press
ENTER.
Select “Set Thumbnail” using M/m, and
press ENTER.
Playback starts from the selected title.
The display for setting the thumbnail
point appears and the title starts to play.
To stop playback
Press x (stop).
5
6
While watching the playback picture,
press H, Xor c
m/M
C
To scroll the list display by page (Page
mode)
Press ./> while the Title List is
displayed. Each time you press ./>,
the entire Title List changes to the next/
previous page of titles.
to select the scene you want to set for a
thumbnail picture, and press X.
Playback pauses.
You can also select a scene using the
Select “OK” using M/m, and press
ENTER.
The scene is set for the title’s thumbnail
picture.
To return to the Title List, press
O RETURN.
About the Title List for DVD-RWs/DVD-Rs
(VR mode)
You can switch the Title List to show
Original or Playlist titles.
1
2
3
Press < while the Title List is
To turn off the Title List
displayed.
Press TITLE LIST.
Select “Play List” using M/m, and press
ENTER.
z Hint
You can select “Title List” from the System Menu.
Select “Original” or “Play List” using M/
m, and press ENTER.
b Notes
• The title names may not appear for DVDs created
on other DVD recorders.
• It may take a few seconds for the thumbnail
pictures to be displayed.
• After editing, the title thumbnail picture may
change to the first scene of the recording (title).
• When the Title List does not appear by pressing
the TITLE LIST button, the DVD has no Title
List. In this case, try pressing the TOP MENU
button to display the DVD’s menu.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
During playback
Example: DVD-R in Video mode
4. Displaying the Playing
Time and Play
Information
+
RW
+
R
-
-
-
RWVR RWVideo
RVR
-
RVideo
DVD VCD
DATA DVD
CD
DATA CD
You can check the playing time of the current
title, chapter, track, or disc. Also, you can
check the disc name recorded on the DVD/
CD.
A Playing status
B Shows that the Resume Play is
C Current selected recording mode
(maximum DVD recording time)
D Remaining time
E Station name and programme position
number
F Audio setting for the current
DISPLAY
programme
G Recording restrictions for the current
programme
Press DISPLAY repeatedly.
I Disc information
The displays differ depending on the disc
type or playing status.
J Title type (Original or Playlist) for
DVD-RW/DVD-R in VR mode
In stop mode
Example: DVD-RW in VR mode
Displays the finalised disc in Video
mode as “DVD-VIDEO.”
L Title number-Chapter number
M Playing time
P Data transfer bar and rate
,continued
33
Download from Www.Somanuals.com. All Manuals Search And Download.
z Hints
• When “On Screen Display” is set to “On”
information automatically appears on the screen
when the recorder is operated.
5. Changing the Name of
a Recorded Programme
+
-
-
+
R
RWVR RWVideo
-
RVR
RW
-
RVideo
b Note
Playing time of MP3 audio tracks may not be
displayed correctly.
You can label a DVD, title, or programme by
entering characters. You can enter up to 64
characters for a title recorded in the DVD-
RW/DVD-R (VR mode), 40 characters for a
title recorded in the DVD+RW/DVD-RW
(Video mode)/DVD+R/DVD-R (Video
mode), but the actual number of characters
displayed in the menus such as the Title List
will vary. The steps below explain how to
change the name of the recorded programme.
CLEAR
TITLE LIST
</M/m/,,
ENTER
O RETURN
.
m
>
M
x
X
1 Press TITLE LIST.
2 Select a title, and press ,.
The sub-menu appears.
3 Select “Edit,” and press ENTER.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Select “Title Name,” and press
ENTER.
9 Press x (or select “OK,” and press
ENTER).
The display for entering characters
To cancel the setting, press
O RETURN.
appears.
The current name is displayed at the
input row.
Input row
5 Move the cursor to the point where you
want to insert the character using
m/M.
To erase all of the characters, press and
hold CLEAR for 2 seconds or more.
6 Select “Upper case” or “Lower case”
using ./>.
The characters for the selected type are
displayed.
The type of characters will change
according to the language you select in
“Easy Setup.”
7 Press </M/m/, to select the
character you want to enter, and press
ENTER.
The selected character appears at the
input row.
To insert a space, press X (or select
“Space,” and press ENTER).
8 Repeat steps 6 and 7 to enter the
remaining characters.
To erase a character, move the cursor to
the character at the input row, and press
CLEAR (or select “Clear,” and press
ENTER).
To insert a character, move the cursor to
the right of the point where you want to
insert the character. Then select the
character, and press ENTER.
To erase all of the characters, press and
hold CLEAR for 2 seconds or more.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Select “Basic,” and press ENTER.
6. Labelling and
Protecting a Disc
You can execute options effective for the
entire disc in the “Disc Setup” setup.
4 Select “Input Disc Name,” and press
ENTER.
5 Select “Next Screen,” and press
ENTER.
SYSTEM
MENU
</M/m/,,
ENTER
z Hint
You can also display the Disc Setup display by
selecting “Disc Setup” from the System Menu.
b Note
DISC
SETUP
You can enter up to 64 characters for a DVD-RW/
DVD-R (VR mode) disc name, and 40 characters
for a DVD+RW/DVD-RW (Video mode)/DVD+R/
DVD-R (Video mode) disc name. The disc name
may not appear when the disc is played on other
DVD equipment.
Labelling a disc
Protecting a disc
+
RW
-
-
+
R
-
RVR
RWVR RWVideo
-
-
RVR
RWVR
-
RVideo
1 Insert a disc.
1 Insert a disc.
2 Press DISC SETUP.
2 Press DISC SETUP.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Select “Basic,” and press ENTER.
7. Playing the Disc on
Other DVD Equipment
(Finalise)
+
RW
-
-
+
R
-
RVR
RWVR RWVideo
-
RVideo
Finalising is necessary when you play discs
recorded with this recorder on other DVD
equipment.
4 Select “Protect Disc,” and press
ENTER.
When you finalise a DVD+RW, DVD-RW
(Video mode), DVD+R, or DVD-R (Video
mode), a DVD menu will be automatically
created, which can be displayed on other
DVD equipment.
Before finalising, check the differences
between the disc types in the table below.
Differences between disc types
5 Select “On,” and press ENTER.
6 Press SYSTEM MENU to exit.
Discs are automatically finalised
+
RW
when removed from the recorder.
However, you may need to finalise
the disc for certain DVD
equipment, or if the recording time
is short. You can edit or record on
the disc even after finalising.
To cancel the protection
Select “Off” in step 5.
Finalising is unnecessary when
playing a disc on VR format
compatible equipment.
Even if your other DVD equipment
is VR format compatible, you may
need to finalise the disc, especially
if the recording time is short. You
can edit or record on the disc even
after finalising.
-
RWVR
z Hints
• You can set protection for individual titles
• You can also display the Disc Setup display by
selecting “Disc Setup” from the System Menu.
Finalising is necessary when
playing on any equipment other
than this recorder.
-
RWVideo
After finalising, you cannot edit or
record on the disc. If you want to
record on it again, unfinalise
(page 39) or reformat the disc
(page 40). However, if you
reformat the disc, all recorded
contents will be erased.
Finalising is necessary. The disc
can be played only on equipment
that supports DVD-R in VR mode.
After finalising you cannot edit or
record on the disc using this
recorder.
-
RVR
,continued
37
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Select “Next Screen,” and press
ENTER.
Finalising is necessary when
playing on any equipment other
than this recorder.
After finalising, you cannot edit or
record on the disc.
+
R
-
RVideo
For DVD-RW/DVD-R (VR mode), the
recorder starts finalising the disc. Go to
step 8.
6 (DVD+RW/DVD-RW (Video mode)/
DVD+R/DVD-R (Video mode) only)
Select a title menu style, and press
ENTER.
The menu appears in the selected title
menu style when the “top menu” (or
“menu” for a DVD+RW/DVD+R) is
selected on the DVD equipment.
SYSTEM
MENU
7 (DVD+RW/DVD-RW (Video mode)/
DVD+R/DVD-R (Video mode) only)
Select “Yes,” and press ENTER.
The recorder starts finalising the disc.
</M/m/,,
ENTER
DISPLAY
8 Press SYSTEM MENU to exit.
DISC
SETUP
z Hints
• You can check whether the disc has been finalised
• You can also display the Disc Setup display by
selecting “Disc Setup” from the System Menu.
1 Insert a disc.
b Notes
• Depending on the condition of the disc,
recording, or the DVD equipment, discs may not
play even if the discs are finalised.
2 Press DISC SETUP.
• The recorder may not be able to finalise the disc
if it was recorded on another recorder.
• Inserting an unfinalised disc into other DVD
equipment may damage the recorded contents.
• When using a DVD+RW, you can edit or record
on the disc even after finalising. However, the
title menu will not be displayed. Finalise the disc
again to display the title menu.
3 Select “Finalise,” and press ENTER.
4 Select “Finalise,” and press ENTER.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Select “Unfinalise,” and press
ENTER.
Unfinalising a disc
-
-
RWVR RWVideo
For DVD-RWs (Video mode)
DVD-RWs (Video mode) that have been
finalised to prohibit additional recording or
editing can be unfinalised to allow further
recording or editing.
For DVD-RWs (VR mode)
5 Select “Start,” and press ENTER.
The recorder starts unfinalising the disc.
Unfinalising may take several minutes.
If you cannot record or edit on a DVD-RW
(VR mode) that has been finalised with other
DVD equipment, unfinalise the disc.
b Note
The recorder is not able to unfinalise DVD-RWs
(Video mode) that have been finalised on another
recorder.
z Hint
You can also display the Disc Setup display by
selecting “Disc Setup” from the System Menu.
1 Insert a disc.
2 Press DISC SETUP.
3 Select “Finalise,” and press ENTER.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Select “Format,” and press ENTER.
8. Reformatting a Disc
+
RW
-
-
-
-
RVideo
RWVR RWVideo
RVR
New discs are automatically formatted when
inserted. If necessary, you can manually re-
format a DVD+RW, DVD-RW, or DVD-R
disc to make a blank disc. For DVD-RWs or
DVD-Rs, you can select a recording format
(VR mode or Video mode) according to your
needs.
4 Select an item, and press ENTER.
“VR Mode”: Formats DVD-RWs/DVD-
Rs (VR mode or unrecorded discs) in VR
mode.
“Video Mode”: Formats DVD-RWs/
DVD-Rs in Video mode.
“Format DVD+RW”: Formats
DVD+RWs.
5 Select “Start,” and press ENTER.
All contents on the disc are erased.
</M/m/,,
ENTER
z Hints
• By reformatting, you can change the recording
format on DVD-RWs, or record again on DVD-
RWs that have been finalised.
• You can also display the Disc Setup display by
selecting “Disc Setup” from the System Menu.
DISC
SETUP
b Note
You cannot reformat recorded DVD-Rs.
1 Insert a disc.
2 Press DISC SETUP.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Approx. recording time
(hours)
Recording
mode
Timer Recording
*1
*1
DVD
DVD+R DL
*1
DVD-R DL
Before Recording
HQ (High
quality)
1 hr. 1 min. 1 hr. 51 min.
Before you start recording…
HSP
R
1 hr. 30 min. 2 hr. 41 min.
• Check that the disc has enough available
DVD+RWs and DVD-RWs, you can free
• Adjust the recording picture quality if
SP (Standard
mode)
2
3 hr. 35 min.
LSP
ESP
LP
r
r
r
r
r
2 hr. 30 min. 4 hr. 29 min.
3
5 hr. 23 min.
7 hr. 11 min.
10 hr. 46 min.
14 hr. 21 min.
17 hr. 57 min.
4
b Note
EP
6
To play a recorded disc on other DVD equipment,
SLP
8
*2
SEP (Long
duration)
10
Recording mode
*1
The approximate recording time is for 12 cm
DVD discs.
When recording to DVD+RW or DVD+R, SLP
is the longest recording time available. If you
select SEP, the recording mode will
automatically revert to SLP.
Like the standard ×3 recording modes of
video tapes, you can select the desired
recording mode using the REC MODE
button.
Recording modes with higher quality provide
a more beautiful recording, but the large data
volume also results in a shorter recording
time.
*2
z Hint
To easily select a manual recording mode, press
REC MODE repeatedly to display “MN,” and
select a manual recording mode using </,.
Conversely, a longer duration provides a
longer recording time, but the lower data
volume results in a coarser picture quality.
b Notes
• Situations below may cause slight inaccuracies
with the recording time.
Press REC MODE repeatedly to switch the
recording modes.
To select further options for recording mode
(manual recording mode), set “Manual Rec.
Mode” to “On (go to setup)” in the
For timer recording, you can also select
“AUTO” as recording mode, which
maximizes the recording quality for the space
available on the disc.
– Recording a programme with poor reception, or
a programme or video source of low picture
quality.
– Recording on a disc that has already been
edited.
– Recording only a still picture or just sound.
• Programmes are recorded in the following aspect
ratio.
– In the original aspect ratio, when recording to
DVD-RWs/DVD-Rs (VR mode).
– In 4:3 when recording to DVD+RWs/DVD+Rs.
• When recording to DVD-R DLs (Video mode),
the title is divided when the layer switches.
,continued
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording stereo and bilingual
programmes
Unrecordable pictures
Pictures with copy protection cannot be
recorded on this recorder.
The recorder automatically receives and
records stereo and bilingual programmes
based on the ZWEITON system or the
NICAM system.
A DVD-RW (VR mode) or DVD-R (VR
mode) can record both main and sub sounds.
You can switch between main and sub when
playing the disc.
A DVD+RW, DVD+R, DVD-RW (Video
mode), or DVD-R (Video mode) can record
only one sound track (main or sub) at a time.
Select the sound track in the “Audio In” setup
before recording starts. Set “Bilingual
Recording” to “A/L” (default) or “B/R” in the
Copy control Recordable discs
signals
Copy-Free
+
RW
-
-
RWVR RWVideo
+
R
-
-
RVideo
RVR
Copy-Once
Copy-Never
(CPRM*)
(CPRM*)
-
RWVR
-
RVR
None
* The recorded disc can be played only on CPRM
ZWEITON (German stereo) system
When a stereo-based programme is received,
“Stereo” appears.
When a bilingual ZWEITON-based
programme is received, “L,” “R,” or “L+R”
appears.
NICAM system
To record a NICAM programme, be sure to
set “NICAM Select” to “NICAM” (default)
in the “Audio In” setup. If the sound is not
clear when listening to NICAM broadcasts,
z Hint
You can select the audio (main or sub) while
recording bilingual programmes using the AUDIO
button. This does not affect the recorded sound.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Press TIMER.
The “Timer List” display appears.
Timer Recording
(Standard/VIDEO Plus+)
+
RW
-
-
+
R
-
RVR
RWVR RWVideo
-
RVideo
You can set the timer for a total of 32
programmes (8 programmes when using the
VPS/PDC function), up to 30 days in
advance.
There are two methods to set the timer: the
standard method and VIDEO Plus+ method.
• Standard: Set the date, time, and
programme position of the programme
manually.
2 Select the “New Input” row, and press
ENTER.
• VIDEO Plus+: Enter the PlusCode number
designated for each TV programme
Setting the timer manually
(Standard)
3 Select an item using </, and
adjust using M/m. Then press ENTER.
The adjustable items are listed below.
“Pr/CH”: Sets the programme position.
“Date”: Sets the date (up to 30 days
later). Select a recording pattern by
pressing M repeatedly to set the timer for
the same daily or weekly programmes.
“Start”: Sets the start time.
TIMER
“Stop”: Sets the stop time.
“Extend”: Sets duration when a timer
recording is in progress. If the
</M/m/,,
ENTER
programme set to be recorded daily or
weekly is extended, the manually
extended time set here will be added to
the subsequent timer recording times.
Note that when “VPS/PDC” is set to
“On,” you cannot make the “Extend”
setting.
x REC
STOP
• If you want to make the detailed
settings, select “Set Details” and press
ENTER. Select an item using M/m and
set using </,.
“Recording Mode”: Sets the recording
,continued
43
Download from Www.Somanuals.com. All Manuals Search And Download.
“VPS/PDC”: Sets the VPS/PDC
function. See “About the VPS/PDC
function” below.
“Bilingual Recording”: Sets the sound
To confirm, change, or cancel a timer
recording
• To enter a title name, select “Set Title
• If you make a mistake, select the item
and change the setting.
z Hint
You can also display the Timer display by selecting
“Timer Recording” from the System Menu.
b Notes
4 Select “OK,” and press ENTER.
The “Timer List” display appears
• Check that the clock is correctly set before setting
the timer recording. If not, the timer recording
cannot be made.
• To record a satellite programme, turn on the
satellite tuner and select the satellite programme
you want to record. Leave the satellite tuner
turned on until the recorder finishes recording. If
you connect equipment with a timer function, you
• Even if the timer is set for the same daily or
weekly programme, the timer recording cannot be
made if it overlaps with a programme that has
priority. “Overlap” will appear next to the
overlapped setting in the Timer List. Check the
• Even if the timer is set, timer recordings cannot be
made while recording a programme that has
priority.
• The “Rec. Mode Adjust” function only works
with a timer recording and the VPS/PDC function
set to off. It does not function with Quick Timer
or Synchro Rec.
• The beginning of some recordings may not be
made when using the VPS/PDC function.
• You cannot extend the recording duration time
when “VPS/PDC” is set to “On.”
The timer recording indicator lights up
on the front panel display and the
recorder is ready to start recording.
Unlike a VCR, there is no need to turn off
the recorder before the timer recording
starts.
To stop recording during timer recording
Press x REC STOP.
Note that it may take a few seconds for the
recorder to stop recording.
On-screen instructions may appear after
pressing x REC STOP. In this case, follow
the on-screen instructions.
About the VPS/PDC function
VPS/PDC signals are transmitted with TV
programmes in some broadcast systems.
These signals ensure that timer recordings are
made regardless of any broadcast delays,
early starts, or broadcast interruptions.
• The recording mode cannot be set to “AUTO”
when “VPS/PDC” is set to “On.”
To use the VPS/PDC function
Set “VPS/PDC” to “On” in step 3 above.
When you turn on this function, the recorder
starts scanning the channels before the timer
recording starts.
Rec. Mode Adjust
If there is not enough available disc space for
the recording, the recorder automatically
adjusts the recording mode to enable the
entire programme to be recorded. Set “Rec.
Mode Adjust” to “On” in the “Recording”
If the timer settings overlap
The confirmation screen appears.
To store the setting, select “Yes.”
To cancel the overlapped setting, select “No.”
44
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Enter the PlusCode number using </
M/m/, or the number buttons.
• If you want to make the detailed
settings, select “Details” using </M/
m/,, and press ENTER. The date,
start and stop times, programme
Recording TV programmes
using the VIDEO Plus+ system
The VIDEO Plus+ system is a feature that
simplifies setting the timer. Just enter the
PlusCode number listed in the TV
programme guide. The date, time, and
programme position of that programme are
set automatically.
position, recording mode, etc., settings
appear. Press </, to select the item
and press M/m to change the setting
(page 43). Then select “OK.”
Before you start, check that the TV and guide
channels are correctly set in “Set VIDEO
Number
buttons
SYSTEM
MENU
5 Press ENTER.
The timer recording indicator lights up
on the front panel display, and the
recorder is ready to start recording.
</M/m/,,
ENTER
To stop recording during timer recording
Press x REC STOP.
z REC
Note that it may take a few seconds for the
recorder to stop recording.
On-screen instructions may appear after
pressing x REC STOP. In this case, follow
the on-screen instructions.
x REC
STOP
1 Press SYSTEM MENU.
If the timer settings overlap
The System Menu appears.
2 Select “Timer Recording,” and press
ENTER.
To confirm, change, or cancel a timer
recording
3 Select “VIDEO Plus+” using M/m, and
press ENTER.
z Hint
The “Rec. Mode Adjust” function also works with
,continued
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Quick Timer function
Adjusting the recording picture
quality
You can set the recorder to record in 30-
minute increments.
You can adjust the picture quality by
selecting a preset setting. You can also adjust
the picture quality by changing detailed
settings, and store up to three settings in the
memory.
Press z REC repeatedly to set the
duration.
Each press advances the time in 30-minute
increments. The maximum duration is six
hours.
(normal recording)
The time counter decreases minute by minute
to 0:00, then the recorder stops recording (the
power turns off).
SYSTEM
MENU
</M/m/,,
ENTER
To cancel the Quick Timer
Press z REC repeatedly until the counter
appears in the front panel display. The
recorder returns to normal recording mode.
To stop recording, press x REC STOP.
DISPLAY
b Note
1 Press SYSTEM MENU in stop mode.
If you turn off the recorder during recording,
recording is stopped.
The System Menu appears.
2 Select “Picture Adjustment,” and
press ENTER.
3 Select a preset setting, and press
ENTER.
“Tuner”: TV broadcasts
“VCR”: Video cassettes
“DTV”: Digital broadcasts
“Memory1”/“Memory2”/“Memory3”:
Your own settings. To create your own
settings, see “To create your own setting”
To check the detailed settings for the
selected preset, press DISPLAY.
4 Press SYSTEM MENU to exit.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
“Black Level”: Selects the black level
(setup level) for the NTSC video signals.
Select “ON” to remove the 7.5 IRE setup
level.
Normally, select “OFF” position.
“Hue”: Adjusts the colour balance.
“Chroma Level”: Makes the colours
deeper or lighter.
To create your own setting
1
Select “Memory1,” “Memory2,” or
“Memory3” in step 3.
2
Select “Detailed Settings,” and press
ENTER.
The display for adjusting detailed
settings appears.
3
Select an item using M/m, and adjust
settings using </,.
For details about each setting, see the
explanation of the display.
4
Press SYSTEM MENU to exit.
The setting is automatically stored as the
setting you selected in step 1.
“Prog. Motion”: Adjusts the progressive
video signal when “Component Video
when using the HDMI connection.
Select “Motion” for a picture, including
subjects that move dynamically.
Select “Still” for a picture with little
movement.
“Cinema”: Converts the progressive
video signal to match the type of DVD
software that you are watching when
“Component Video Out” is set to
the HDMI connection.
Creating chapters in a title
The recorder can automatically divide a
recording (a title) into chapters by inserting
chapter marks. To select chapter mark
intervals or disable this function, see “Auto
Chapter (VR),” “Auto Chapter (Video),” or
“Auto Chapter (DVD+R/+RW)” in the
When recording to a DVD-R (VR mode) or a
DVD-RW (VR mode), you can edit chapter
Select “Auto” to detect the software type
(Film-based or Video-based)
automatically and select the appropriate
conversion mode. Normally select this
position.
Select “Off” to fix the conversion mode
to the mode for Video-based software.
“3-D Y/C”: Adjusts the brightness/
colour separation for the video signals.
Select “Motion” for a picture, including
subjects that move dynamically.
Select “Still” for a picture with little
movement.
“YNR” (luminance noise reduction):
Reduces noise contained in the
luminance element of the video signal.
“CNR” (chroma noise reduction):
Reduces noise contained in the chroma
element of the video signal.
“Detail”: Adjusts the sharpness of
images outlines.
“White AGC”: Turn on for automatic
white level adjustment.
“White Enhancer”: Adjusts the intensity
of white.
“Black Enhancer”: Adjusts the intensity
of black.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Select an option, and press ENTER.
“Modify”:
Checking/Changing/
Cancelling Timer
Settings (Timer List)
Changes the timer setting.
Select an item using </, and adjust
using M/m. Select “OK,” and press
ENTER.
+
RW
-
-
+
R
-
RVR
RWVR RWVideo
-
RVideo
You can check, change, or cancel timer
settings using the “Timer List.”
“Erase”:
Erases the timer setting. Select “Yes,”
and press ENTER.
“Skip Once”:
TIMER
Cancels the daily or weekly recordings
only once. After cancelling the timer
setting, “Skip Once” appears next to the
timer setting in the “Timer List.”
To change or cancel the setting, repeat
steps 2 and 3 above.
</M/m/,,
ENTER
.
>
When the timer settings overlap
• The programme that starts first has priority
and the entire programme is recorded.
• After finishing the previous recording, the
other recording starts with several tens-of-
second’s delay (when the end-time of one
recording and the start-time of another are
the same).
1 Press TIMER.
The “Timer List” display appears.
• When the recordings start at the same time,
only one of them will be recorded. Cancel
the timer setting for the programme that you
are not going to record.
Timer information displays the recording
date, time, recording mode, etc.
z Hint
You can move to the first row/bottom row of the
Timer List using ./> while the list is
displayed.
When all of the timer settings do not fit
on the list, the scroll bar appears.
To view the hidden timer settings, press
M/m.
2 Select the timer setting you want to
check/change/cancel, and press ,.
The sub-menu appears.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
b Notes
• When “VPS/PDC” is set to “On” for one or more
timer recordings, the start times may change in
the event of a broadcast delay or early start.
• Even if the timer is set, timer recordings cannot be
made while recording a programme that has
priority.
Recording from
Connected Equipment
• Even if the timer is set for the same daily or
weekly programme, the timer recording cannot be
made if it overlaps with a programme that has
priority. “Overlap” will appear next to the
overlapped setting in the Timer List. Check the
priority order of the settings.
[/1
INPUT
</M/m/,,
ENTER
z REC
REC MODE
x REC
STOP
Recording from connected
equipment with a timer
(Synchro Rec.)
-
+
RW
-
-
+
R
RVR
RWVR RWVideo
-
RVideo
You can set the recorder to automatically
record programmes from connected
equipment that has a timer function (such as
a satellite tuner). Connect the equipment to
the LINE 1/DECODER jack of the recorder
When the connected equipment turns on, the
recorder starts recording a programme from
the LINE 1/DECODER jack.
1 Press REC MODE repeatedly to select
the recording mode.
For details about recording mode, see
,continued
49
Download from Www.Somanuals.com. All Manuals Search And Download.
b Notes
2 Select the desired audio signal when
recording a bilingual programme.
Set “External Audio” to “Bilingual” and
“Bilingual Recording” to “A/L” or “B/R”
For details about the bilingual recording,
• The recorder starts recording only after detecting
a video signal from the connected equipment. The
beginning of the programme may not be recorded
regardless of whether or not the recorder’s power
is on or off.
• The Synchro Rec function does not work when
“LINE 1 In” is set to “Decoder” in the “Video In/
• The Synchro Rec function does not work with
some tuners. For details, see the tuner’s operating
instructions.
• The Synchro Rec function does not work when
the timer is set for the programme from the LINE
1/DECODER jack and the VPS/PDC function is
on.
• While the recorder is standing by for Synchro-
Recording, the Auto Clock Set function (page 75)
does not work.
3 Set the timer on the connected
equipment to the time of the
programme you want to record, and
turn it off.
4 Press down x REC STOP on the
recorder for more than 3 seconds.
The SYNCHRO REC indicator lights up
in the front panel display and the recorder
turns off. The recorder is ready to start
Synchro-Recording.
• To use the Synchro Rec function, you must first
set the recorder’s clock correctly.
You can also set the recorder to stand by
for Synchro-Recording by setting
“Synchro Rec.” of “Timer Recording” to
“Yes” from the System Menu.
• For a bilingual programme, only the audio signal
selected in step 2 can be played back.
If the timer settings of a Synchro-
Recording and another timer recording
overlap
Timer recordings always have priority. The
Synchro-Recording starts only after the timer
recording has finished.
To cancel Synchro Rec before recording
starts
Press [/1.
The SYNCHRO REC indicator in the front
panel display turns off.
Timer
recording
To cancel Synchro Rec during recording
Press down z REC for more than 3 seconds.
The Synchro Rec is cancelled, and the
recording continues.
Synchro-
Recording
will be cut off
To stop recording
Press x REC STOP. Then select “Yes” in the
confirmation display, and press ENTER.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
z Hint
You can adjust the settings for the recording picture
before recording. See “Adjusting the recording
Recording from connected
equipment without a timer
-
+
-
-
+
R
RVR
RWVR RWVideo
RW
b Notes
-
RVideo
• When recording a video game image, the screen
may not be clear.
You can record from a connected VCR or
similar device. To connect a VCR or similar
device, see “Connecting a VCR or Similar
• Any programme that contains a Copy-Never copy
guard signal cannot be recorded.
• When “Bilingual Recording” is set to “A/L” or
“B/R” in step 3, you cannot select the sound when
playing in the following cases.
– When recording in PCM mode.
– When recording to DVD+RW/DVD+R/DVD-
RW/DVD-R (Video mode).
1 Insert a recordable DVD.
• You cannot select “L1” in step 2 if “LINE 1 In” is
set to “Decoder” in the “Video In/Out” setup
2 Press INPUT to select an input source
according to the connection you
made.
The front panel display changes as
follows:
programme position
3 Select the desired audio signal when
recording a bilingual programme to
DVD-RWs/DVD-Rs (Video mode).
Set “External Audio” to “Bilingual” and
“Bilingual Recording” to “A/L” or “B/R”
4 Press REC MODE repeatedly to select
the recording mode.
For details about the recording mode, see
5 Insert the source tape into the
connected equipment and set to
playback pause.
6 Press z REC.
This recorder starts recording.
7 Press the pause (or play) button on the
connected equipment to cancel the
playback pause status.
The connected equipment starts playback
and the playback image is recorded by
this recorder.
To stop recording, press x REC STOP
on this recorder.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Select a title using M/m, and press
ENTER.
Playback
Playback starts from the selected title.
Playing the Recorded
Programme/DVD
To use the DVD’s Menu
When you play a DVD VIDEO, or a finalised
DVD+RW, DVD-RW (Video mode),
DVD+R, or DVD-R (Video mode), you can
display the disc’s menu by pressing TOP
MENU or MENU.
+
+
R
-
-
-
RVR
RWVR RWVideo
RW
*
*
-
RVideo
DVD VCD
DATA DVD DATA CD
* DivX video file only
b Note
The H button is not available in the disc’s menu.
To play VIDEO CDs/Super VIDEO CDs with
PBC functions
Number
buttons
PBC (Playback Control) allows you to play
VIDEO CDs/Super VIDEO CDs
interactively using the menu on your TV
screen.
When you start playing a VIDEO CD/Super
VIDEO CD with PBC functions, the menu
appears.
Select an item using the number buttons, and
press ENTER. Then, follow the instructions
in the menu (press H when “Press
SELECT” appears).
CLEAR
PLAY
MODE
AUDIO
SUBTITLE
ANGLE
SYSTEM
MENU
TITLE LIST
MENU
TOP MENU
</M/m/,,
ENTER
DISPLAY
/
.
>
H/X/x
b Note
Some playback options such as search, repeat play
or programme play cannot be played with PBC
function. To play with playback options, start
playback without PBC functions using the Title
List.
1 Insert a disc.
• If you insert a DVD VIDEO, VIDEO
CD, DATA DVD or DATA CD, press
H. Playback starts.
To change the angles
If various angles (multi-angles) for a scene
are recorded on the disc, “
” appears on
the screen. Press ANGLE during playback.
To switch the angle mark indicator to off, set
“Angle Indicator” to “Off” in the “Playback”
2 Press TITLE LIST.
For details about the Title List, see “3.
Example: DVD-RW in VR mode
To stop playback
Press x.
To playback quickly with sound (Scan
Audio)
When you press M during playback, you
can play quickly with dialogue or sound
(except for VIDEO CDs/Super VIDEO
CDs).
No sound is output when you press M two
or more times to change search speed.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
To display the registration code for this
recorder
Select “Registration Code” of “DivX” in the
To lock the recorder (Child Lock)
You can lock all of the buttons on the
recorder so that the settings are not cancelled
by mistake.
When the recorder is turned off, hold down x
on the recorder until “LOCKED” appears in
the front panel display. The recorder does not
work except for timer recordings and
Synchro-Recording while the Child Lock is
set.
To resume playback from the point where
you stopped (Resume Play)
When you press H again after you stop
playback, the recorder resumes playback
from the point where you pressed x.
To unlock the recorder, hold down x on the
recorder until “UNLOCKED” appears in the
front panel display.
To start from the beginning, press x again,
and press H. Playback starts from the
beginning of the title/track/scene.
One-Touch Play (for SCART/HDMI
connections only)
The point where you stopped playing is
cleared when:
Press H. With one touch of the H button,
the recorder and your TV automatically turn
on and the TV’s input is switched to the
recorder. Playback starts automatically.
Set “HDMI Control” to “On” in the “HDMI
Touch Play function.
– you open the disc tray.
– you play another title.
– you start playback using the Title List.
– you edit the title after stopping playback.
– you change the settings on the recorder.
– you make a recording (except DVD-RWs/
DVD-Rs in VR mode).
– you disconnect the mains lead.
z Hint
to start playback.
b Note
Resume Play is not available for Super VIDEO
CDs.
b Note
When using the HDMI connection, there may be a
delay, before the playback picture appears on the
TV screen, and the beginning portion of the
playback picture may not be displayed.
To play restricted DVDs (Parental Control)
If you play a restricted DVD, the display for
entering your password appears on your TV
screen.
Enter your four-digit password using the
number buttons, and press ENTER.
The recorder starts playback.
To register or change the password, see
,continued
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback options
To check the position of the buttons below, see the illustration on page 52.
Buttons
Operations
AUDIO
Selects one of the audio tracks recorded on the disc when pressed
repeatedly in normal playback mode.
-
-
RWVR
RVR
DVD
*
*
: Selects the language.
DVD DATA DVD DATA CD
*
*
VCD DATA DVD DATA CD
-
: Selects the main or sub sound.
-
RWVR
RVR
* DivX video file only
: Selects stereo or monaural audio tracks.
VCD
SUBTITLE
*
Selects a subtitle language when pressed repeatedly.
*
DVD DATA DVD
DATA CD
* DivX video file only
/
(instant replay/
Each time you press
duration.
, replays the scene for the following
instant advance)
5 seconds t 15 seconds t 30 seconds t 1 minute t
2 minutes t 3 minutes t 5 minutes t 10 minutes t
20 minutes t advances the time in 10-minute increments t
2 hours
Each time you press
, briefly fast forwards the current scene
for the following duration.
30 seconds t 1 minute t 1 minute 30 seconds t 2 minutes t
3 minutes t 5 minutes t 10 minutes t 20 minutes t
advances the time in 10-minute increments t 2 hours
. (previous)/
> (next)
Goes to the beginning of the previous/next title/chapter/scene/track
when pressed during playback.
Goes to the beginning of the first title/track when pressed in stop
mode.
Fast reverses/fast forwards the disc when pressed during playback.
Search speed changes as follows:
(fast reverse/fast forward)
fast reverse fast forward
*1
*2
mFR1
T
t MFF1
mFR2 T T t t MFF2
mFR3 T T T t t t MFF3
mFR4 T T T T t t t t MFF4
*3
*3
*3
*3
When you press and hold the button, fast forward/fast reverse
continues at the selected speed until you release the button.
*1
When you press m once during playback, you can play Reverse
play (not available for VIDEO CDs/Super VIDEO CDs/DivX video
files).
When you press M once during playback, you can play quickly
*2
with sound (not available for VIDEO CDs/Super VIDEO CDs).
Not available for VIDEO CDs/Super VIDEO CDs.
*3
To resume normal playback, press H.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Buttons
Operations
Plays in slow motion when pressed for more than one second in
pause mode.
(slow, freeze frame)
Plays one frame at a time when pressed briefly in pause mode.
To resume normal playback, press H.
-
-
+
RWVideo
RWVR
RW
-
RVideo
*1
+
-
RVR
R
VCD
DVD
*1*2
*1*2
DATA DVD
DATA CD
*1
Playback direction only
DivX video file only
*2
X (pause)
Pauses playback.
To resume normal playback, press H.
b Notes
• Angles and subtitles cannot be changed with titles
recorded on this recorder.
• JPEG image files made with a DVD camcorder
can only be played as a slideshow. For video files
containing JPEG image files and movies, the
recorder can play movie parts only.
Notes on playing DVDs with a DTS sound
track
DTS audio signals are output only through the
DIGITAL OUT (COAXIAL) jack.
When you play a DVD with DTS sound tracks, set
“DTS Output” to “On” in the “Audio Out” setup
,continued
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a specific portion
repeatedly (A-B Repeat)
Playing repeatedly (Repeat)
You can play repeatedly all the titles/tracks/
files or a single title/chapter/track on a disc.
1 Press PLAY MODE during playback.
The “Play Mode” menu appears.
1 Press PLAY MODE during playback.
The “Play Mode” menu appears.
2 Select “A-B Repeat,” and press
ENTER.
2 Select “Repeat,” and press ENTER.
“Set point A” is selected.
3 Select an item to be repeated using M/
m.
“Repeat Title” (for DVDs/DATA
*1
*1
DVDs /DATA CDs ): repeats the
current title.
“Repeat Chapter” (for DVDs): repeats
the current chapter.
*2
“Repeat Track” (for VIDEO CDs ):
repeats the current track.
“Repeat Programme”: repeats the current
“Repeat Disc” (for VIDEO CDs /DVD-
3 While monitoring the sound, press
ENTER at the starting point (point A) of
the portion to be played repeatedly.
“Set point B” is selected.
*2
RWs/DVD-Rs (VR mode)): repeats all of
the tracks on a disc.
*1
DivX video file only
Available only when playing without PBC
4 Continue playing to locate the ending
point (point B), and press ENTER.
A-B Repeat starts.
*2
functions
4 Press ENTER.
Repeat play starts.
To cancel A-B Repeat
Press CLEAR. Or, set “A-B Repeat” to “Off”
in the “Play Mode” menu.
To cancel Repeat play
Press CLEAR. Or, set “Repeat” to “Repeat
Off” in the “Play Mode” menu.
z Hint
You can select “A-B Repeat” from “Play Mode” in
the System Menu.
z Hint
You can select “Repeat” from “Play Mode” in the
System Menu.
b Note
When playing a DVD VIDEO/DVD-RW (Video
mode)/DVD-R (Video mode), set the start and stop
points within the same title.
b Note
You cannot select “Repeat Programme” when no
programme remains.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
To cancel Programme play
Creating your own programme
(Programme)
Press CLEAR during playback. Or, set
“Programme” to “Cancel Programme Play”
in the “Play Mode” menu.
*
*
-
-
RVideo
RWVideo
VCD
To erase the programme
* finalised disc only
Press CLEAR in stop mode. Or, set
“Programme” to “Erase Programme List” in
the “Play Mode” menu.
You can play the contents of a disc in the
order you want by arranging the order of the
titles/chapters/albums/tracks on the disc to
create your own programme. You can make a
programme of up to 24 steps.
z Hints
• The program you made remains after Programme
play finishes. To play the same program again, set
“Programme” to “Start Programme Play” in the
“Play Mode” menu. However, the programme is
cleared after you remove the disc or press [/1.
• You can repeat Programme play. Set “Repeat” to
“Repeat Programme” in the “Play Mode” menu
1 Press PLAY MODE during playback.
The “Play Mode” menu appears.
2 Select “Programme,” and press
ENTER.
• You can select “Programme” from “Play Mode”
in the System Menu.
3 Select “Input/Edit Programme,” and
press ENTER.
The “Input/Edit Programme” display
differs depending upon the disc type.
Example: DVD
Adjusting the picture quality
+
RW
+
R
-
-
-
RVR
RWVR RWVideo
*
*
-
RVideo
DATA CD
DVD VCD
DATA DVD
* DivX video file only
You can adjust the picture quality from
connected equipment, such as a TV or
projector by selecting a preset setting. You
can also adjust the picture quality by
changing detailed settings, and store up to
three settings in the memory.
4 Select a title or album (example: Title
01) using M/m, and press ENTER.
1 Press SYSTEM MENU during playback
or in pause mode.
5 Select a chapter or track (example:
Chapter 001) using M/m, and press
ENTER.
The System Menu appears.
2 Select “Picture Adjustment,” and
press ENTER.
The chapter or track is programmed.
If you make a mistake, select the step
number (example: 01.) using </M/m,
and press CLEAR.
3 Select a preset setting using </,,
and press ENTER.
6 To programme other chapters or
tracks, press </M/m/, to select a
step number, and repeat steps 4 and
5.
Dynamic: produces a bold dynamic
picture by increasing the picture contrast
and the colour intensity.
Standard: displays a standard picture.
Professional: displays an original picture.
Memory1/Memory2/Memory3: Your
own settings. To create your own
settings, see “To create your own setting”
below.
7 Press H.
Programme play starts.
,continued
57
Download from Www.Somanuals.com. All Manuals Search And Download.
To check the detailed settings for the
selected preset, press DISPLAY.
“BNR” (block noise reduction): Reduces
“block noise” or mosaic-like patterns in
the picture.
“MNR” (mosquito noise reduction):
Reduces the faint noise appearing around
the outlines of the images. The noise
reduction effects are automatically
adjusted within each setting range
according to the video bit rate and other
factors.
4 Press SYSTEM MENU to exit.
To create your own setting
1
2
Select “Memory1,” “Memory2,” or
“Memory3” in step 3.
Select “Detailed Settings,” and press
ENTER.
The display for adjusting detailed
settings appears.
“Sharpness”: Sharpens the outlines of the
images.
“Detail”: Adjusts the sharpness of
images outlines.
“White Enhancer”: Adjusts the intensity
of white.
“Black Enhancer”: Adjusts the intensity
of black.
“Black Level”: Selects the black level
(setup level) for the video signals.
Select “ON” to raise the black level.
Select this when the picture appears too
dark.
Select “OFF” to set the black level of the
input signals to the standard level.
Normally, select this position.
“Gamma Correction”: Adjusts how dark
areas look.
3
Select an item using M/m, and adjust
settings using </,.
For details about each setting, see the
explanation of the display.
“Prog. Motion”: Adjusts the progressive
video signal when “Component Video
when “Screen Resolution” is set to other
than “720 x 576i” (or “720 x 480i”)
Select “Motion” for a picture, including
subjects that move dynamically.
Select “Still” for a picture with little
movement.
“Cinema”: Converts the progressive
video signal to match the type of DVD
software that you are watching when
“Component Video Out” is set to
Resolution” is set to other than “720 x
Select “Auto1” to automatically detect
the software type (Film-based or Video-
based) and select the appropriate
conversion mode. Normally select this
position.
“Hue”: Adjusts the colour balance.
“Chroma Level”: Makes the colours
deeper or lighter.
4
Press SYSTEM MENU to exit.
The setting is automatically stored as the
setting you selected in step 1.
b Notes
• If the outlines of the images on your screen
become blurred, set “BNR” and/or “MNR” to
“Off.”
• Depending on the disc or the scene being played,
the above BNR or MNR effects may be hard to
discern. Also, these functions may not work with
some screen sizes.
• The following settings are not available for the
signals output from the HDMI jack.
– “Sharpness”
– “White Enhancer”
– “Black Enhancer”
– “Black Level”
– “Gamma Correction”
If the picture appears unnatural, select
“Auto2,” “On,” or “Off.”
– “Hue”
– “Chroma Level”
“YNR” (luminance noise reduction):
Reduces noise contained in the
luminance element of the video signal.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
The display for entering the number
appears.
Example: Chapter Search
Searching for a Time/
Title/Chapter/Track, etc.
+
RW
+
R
-
-
-
RVR
RWVR RWVideo
*
*
-
RVideo
DVD VCD
DATA CD
DATA DVD
* DivX video file only
You can search a disc by title, chapter, scene
or track. As titles and tracks are assigned
individual numbers, select the title or track by
entering its number. You can also search for
a scene using the time code.
4 Press the number buttons to select the
number of the title, chapter, time
code, etc., you want.
For example: Time Search
To find a scene at 2 hours, 10 minutes,
and 20 seconds, enter “21020.”
If you make a mistake, select another
number.
Number
buttons
5 Press ENTER.
PLAY
MODE
The recorder starts playback from the
selected number.
</M/m/,,
ENTER
1 Press PLAY MODE during playback.
The “Play Mode” menu appears.
2 Select “Search Mode,” and press
ENTER.
3 Select a search method, and press
ENTER.
“Time Search” (for DVDs/DATA
*1
*1
DVDs /DATA CDs /VIDEO
CDs
*2*3
): Searches for a starting point by
entering the time code.
“Title Search” (for DVDs/DATA
*1
*1
DVDs /DATA CDs
)
“Chapter Search” (for DVDs)
*3
“Track Search” (for VIDEO CDs
)
*1
DivX video file only
Except Super VIDEO CDs
Available only when playing without PBC
functions
*2
*3
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Erasing and Editing
Before Editing
This recorder offers various edit options for
various disc types.
b Notes
• You may lose the edited contents if you remove
the disc or a timer recording starts while editing.
• DVD discs created by DVD camcorders cannot
be edited on this recorder.
• If a message appears and indicates that the disc’s
control information is full, erase or edit
unnecessary titles.
• The remaining disc space displayed on the screen
may differ from the actual remaining disc space.
• When editing a DVD+R or DVD-R, finish all
editing before finalising the disc. You cannot edit
a finalised disc.
-
RWVR
+
RW
-
RVR
-
RWVideo
Edit features
+
R
Original
title
Playlist
title
-
RVideo
Title edit
Erase (page 61)
Yes
Yes
Yes
No
No
Yes
No
No
No
Yes
No
No
No
No
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
No
Title Name (page 61)
Set Thumbnail (page 61)
A-B Erase (page 62)
Divide (page 65)
Protect (page 61)
Move (page 65)
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Combine (page 65)
Creating a Playlist (page 64)
Undo (page 61)
No
No
Yes
Yes
Yes
No
Chapter edit
Divide (page 63)
Erase (page 64)
Move (page 66)
Combine (page 64)
Yes
60
Download from Www.Somanuals.com. All Manuals Search And Download.
To open up disc space
To open up disc space on a DVD+RW or
DVD-RW (Video mode), erase the title with
the largest number in the title list.
Erasing and Editing a
Title
+
RW
-
-
+
R
RWVR RWVideo
-
RVR
-
RVideo
This section explains the basic edit functions.
Note that editing is irreversible. To edit
DVD-RWs/DVD-Rs (VR mode) without
changing the original recordings, create a
Largest title number
To open up disc space on a DVD-RW (VR
mode), you can erase any title.
For DVD-Rs and DVD+Rs, the available disc
space does not increase even if you erase
titles.
TITLE LIST
To switch between the Playlist and
Original Title List (DVD-RW/DVD-R in VR
mode only)
You can display the Playlist titles in the Title
List (Playlist), or the Original titles in the
Title List (Original).
</M/m/,,
ENTER
O
RETURN
.
m
H
M
1
2
3
Press < while the Title List is
X
displayed.
Select “Play List” using M/m, and press
ENTER.
Select “Original” or “Play List” using M/
m, and press ENTER.
1 Press TITLE LIST.
For DVD-RWs/DVD-Rs in VR mode,
switch the Title List (Original or
Playlist), if necessary.
2 Select a title, and press ,.
The sub-menu appears.
3 Select an option, and press ENTER.
You can make the following edits to the
title.
“Erase”: Erases the selected title. Select
“Yes” when asked for confirmation.
“Edit”: Allows you to make the
following edits.
• “Title Name”: Allows you to enter or
• “Set Thumbnail”: Changes the title’s
thumbnail picture that appears in the
,continued
61
Download from Www.Somanuals.com. All Manuals Search And Download.
• “A-B Erase”: Erases a section of the
• “Divide”: Divides a title into two titles
• “Chapter Edit”: Edits chapters in a title
6 Select point B using m/M or H,
and press X.
7 Select “To,” and press ENTER.
The position of point B is displayed.
8 Select “Yes,” and press ENTER.
• “Protect”: Protects the title. “
”
The scene is erased.
appears next to the protected title.
• “Move”: Changes the title’s playing
• “Combine”: Combines two titles into
To cancel “A-B Erase”
Press O RETURN. The Title List appears.
“Undo”: Undoes the last edit you made.
z Hint
A chapter mark is inserted after the scene is erased.
The chapter mark divides the title into separate
chapters on either side of the mark.
z Hint
b Notes
You can label or re-label DVDs (page 36).
• Images or sound may be momentarily interrupted
at the point where you erase a section of a title.
• Sections shorter than five seconds may not be
erased.
Erasing a section of a title
(A-B Erase)
-
-
RVR
RWVR
You can select a section (scene) in a title and
erase it. Note that erasing scenes in a title
cannot be undone.
Title,” select “Edit,” and press
ENTER.
2 Select “A-B Erase,” and press ENTER.
The display for setting point A appears.
The title starts to play.
3 Select point A using m/M or H,
and press X.
• To return to the beginning of the title,
press X and then press ..
4 Select “From,” and press ENTER.
The position of point A is displayed.
5 Press H.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Select an option, and press ENTER.
You can make the following edits to the
chapter.
Erasing and Editing a
Chapter
“Divide”: Divides a chapter into two
“Erase/Move”
-
-
RVR
RWVR
• “Erase”: Erases the selected chapter
You can edit individual chapters within a
title. To edit DVD-RWs/DVD-Rs (VR mode)
without changing the original recordings,
• “Move” (for Playlist titles on DVD-
RWs/DVD-Rs in VR mode): Changes
“Combine”: Combines two chapters into
Dividing a chapter (Divide)
Chapter,” select “Divide.”
TITLE LIST
</M/m/,,
ENTER
.
m
H
M
X
2 Select a chapter using </,, and
press ENTER.
1 Press TITLE LIST.
3 Select the dividing point using m/
For DVD-RWs/DVD-Rs in VR mode,
switch the Title List (Original or
Playlist), if necessary.
M or H, and press X.
• To return to the beginning of the
chapter, press X and then press ..
2 Select a title containing the chapter
you want to edit, and press ,.
The sub-menu appears.
4 Press ENTER.
The chapter is divided into two.
3 Select “Edit,” and press ENTER.
4 Select “Chapter Edit,” and press
ENTER.
,continued
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Erasing a chapter (Erase)
Creating and Editing a
Playlist
Chapter,” select “Erase.”
-
RWVR
-
RVR
Playlist edit allows you to edit or re-edit
without changing the actual recordings. You
can create up to 99 Playlist titles.
2 Select a chapter using </,, and
press ENTER.
3 (For a Playlist chapter only)
Select “Erase,” and press ENTER.
The display asks for confirmation.
TITLE LIST
</M/m/,,
ENTER
4 Select “Yes,” and press ENTER.
.
The chapter is erased.
m
H
M
X
Combining multiple chapters
(Combine)
Chapter,” select “Combine.”
1 Press TITLE LIST.
2 Press ,.
The sub-menu appears.
3 Select “Create,” and press ENTER.
The original titles in the Title List appear.
4 Select an original title to add to the
Playlist, and press ENTER.
The selected title is added to the Playlist.
2 Move the combining bar using </
,, and press ENTER.
5 Repeat steps 3 and 4 to select all of
the titles you want to add to the
Playlist.
The two adjacent chapters of the
combining bar are combined.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Moving a Playlist title (Move)
Dividing a Playlist title (Divide)
-
-
RVR
RWVR
1 Press TITLE LIST.
You can divide a Playlist title.
2 Select a Playlist title, and press ,.
1 Press TITLE LIST.
The sub-menu appears.
3 Select “Edit,” and press ENTER.
4 Select “Move,” and press ENTER.
2 Select a Playlist title, and press ,.
The sub-menu appears.
3 Select “Edit,” and press ENTER.
4 Select “Divide,” and press ENTER.
The display for setting the dividing point
appears.
The title starts to play.
5 Select a new location for the title
using M/m, and press ENTER.
The title moves to the new location.
• To move more titles, repeat from step 2.
Combining multiple Playlist
titles (Combine)
5 Select the dividing point using m/
M or H, and press X.
• To return to the beginning of the title,
press X and then press ..
1 Press TITLE LIST.
6 Press ENTER.
2 Select a Playlist title, and press ,.
The title is divided into two.
The sub-menu appears.
3 Select “Edit,” and press ENTER.
4 Select “Combine,” and press ENTER.
5 Select a title you want to combine,
and press ENTER.
6 Select “Yes,” and press ENTER.
The titles are combined.
,continued
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Moving a chapter (Move)
1 Press TITLE LIST.
2 Select a Playlist title containing the
chapter you want to edit, and press
,.
The sub-menu appears.
3 Select “Edit,” and press ENTER.
4 Select “Chapter Edit,” and press
ENTER.
5 Select “Erase/Move.”
6 Select a chapter using </,, and
press ENTER.
7 Select “Move,” and press ENTER.
8 Select a new location for the chapter
using </,, and press ENTER.
The chapter moves to the new location.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
To lock the recorder (Child Lock)
You can lock all of the buttons on the
recorder so that the settings are not cancelled
by mistake.
Audio Tracks
When the recorder is turned off, hold down x
on the recorder until “LOCKED” appears in
the front panel display. The recorder does not
work except for timer recordings and
Synchro-Recording while the Child Lock is
set.
Playing Audio Tracks
from CD/DVD
CD DATA DVD DATA CD
You can play audio tracks on CDs, DATA
DVDs (DVD-ROMs/DVD+RWs/DVD+Rs/
DVD-RWs/DVD-Rs/DVD-RAMs), or
DATA CDs (CD-ROMs/CD-Rs/CD-RWs).
To unlock the recorder, hold down x on the
recorder until “UNLOCKED” appears in the
front panel display.
Playback options
CD DATA DVD DATA CD
AUDIO
CLEAR
Buttons
Operations
PLAY
MODE
AUDIO
Selects stereo or monaural
audio tracks recorded on the
disc when pressed repeatedly
in normal playback mode.
TITLE LIST
</M/m/,,
ENTER
./>
(previous/
next)
Goes to the next or previous
track when pressed during
playback.
For MP3 discs, goes to the next
or previous album when
pressed repeatedly.
.
>
M
x
m
H
X
m/M
(fast
Fast reverses/fast forwards the
disc when pressed during
reverse/fast playback.
forward)
Search speed changes as
follows:
fast reverse fast forward
mFR1 T t FF1
mFR2 T T t t FF2
When you press and hold the
button, fast forward/fast
reverse continues at the
selected speed until you release
the button.
1 Insert a disc.
M
2 Press H.
M
Playback starts.
To stop playback
Press x (stop).
To resume normal playback,
press H.
z Hint
You can play audio tracks using the Title List. Press
TITLE LIST. Then select a track, and press
ENTER.
X (pause)
Pauses playback.
To resume normal playback,
press H.
b Note
When any video titles are recorded on a DATA
DVD, the MP3 audio tracks on that DATA DVD
cannot be played.
,continued
67
Download from Www.Somanuals.com. All Manuals Search And Download.
b Note
Notes on playing DTS sound tracks on a
CD
“A-B Repeat” is not available for MP3 audio tracks.
• When playing DTS-encoded CDs, excessive
noise will be heard from the LINE 3-TV/LINE 1/
DECODER/LINE 2 OUT (R-AUDIO-L) jacks.
To avoid possible damage to the audio system,
the user should take proper precautions when the
LINE 3-TV/LINE 1/DECODER/LINE 2 OUT
(R-AUDIO-L) jacks of the recorder are connected
to an amplification system. To enjoy DTS Digital
Surround™ playback, an external DTS decoder
must be connected to the DIGITAL OUT jack of
the recorder.
Playing repeatedly (Repeat)
CD DATA DVD DATA CD
You can play repeatedly all the tracks or a
single track on an album or disc.
1 Press PLAY MODE during playback.
The “Play Mode” menu appears.
• Set the sound to “Stereo” using the AUDIO
button when you play DTS sound tracks on a CD
2 Select “Repeat,” and press ENTER.
3 Select an item to be repeated using M/
m.
“Repeat Disc”: repeats all of the tracks
on a disc.
“Repeat Album” (except for CD): repeats
the current album.
“Repeat Track”: repeats the current
track.
“Repeat Programme”: repeats the current
Playing a specific portion
repeatedly (A-B Repeat)
CD
1 Press PLAY MODE during playback.
The “Play Mode” menu appears.
2 Select “A-B Repeat,” and press
4 Press ENTER.
ENTER.
Repeat play starts.
“Set point A” is selected.
To cancel Repeat play
Press CLEAR. Or, set “Repeat” to “Repeat
Off” in the “Play Mode” menu.
z Hint
You can select “Repeat” from “Play Mode” in the
System Menu.
3 While monitoring the sound, press
ENTER at the starting point (point A) of
the portion to be played repeatedly.
“Set point B” is selected.
b Note
You can select “Repeat Programme” only during
Programme play.
4 Continue playing to locate the ending
point (point B), and press ENTER.
A-B Repeat starts.
To cancel A-B Repeat
Press CLEAR. Or, set “A-B Repeat” to “Off”
in the “Play Mode” menu.
z Hint
You can select “A-B Repeat” from “Play Mode” in
the System Menu.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
To cancel Programme play
Creating your own programme
(Programme)
Press CLEAR during playback. Or, set
“Programme” to “Cancel Programme Play”
in the “Play Mode” menu.
CD DATA DVD DATA CD
To erase the programme
You can play the contents of an album or disc
in the order you want by arranging the order
of the albums/tracks on a disc to create your
own programme. You can make a
Press CLEAR in stop mode. Or, set
“Programme” to “Erase Programme List” in
the “Play Mode” menu.
programme of up to 24 steps.
z Hints
• The programme you made remains after
Programme play finishes. To play the same
programme again, set “Programme” to “Start
Programme Play” in the “Play Mode” menu.
However, the programme is cleared after you
remove the disc or press [/1.
• You can repeat Programme play. Set “Repeat” to
“Repeat Programme” in the “Play Mode” menu
1 Press PLAY MODE during playback.
The “Play Mode” menu appears.
2 Select “Programme,” and press
ENTER.
3 Select “Input/Edit Programme,” and
press ENTER.
• You can select “Programme” from “Play Mode”
in the System Menu.
The “Input/Edit Programme” display
differs depending upon the disc type.
Example: DATA DVD
4 Select an album (example:
01.BRAHMS) using M/m, and press
,.
5 Select a track (example:
001.SYMPHONY01) using M/m, and
press ENTER.
The track is programmed.
If you make a mistake, select the step
number (example: 01-001) using </M/
m, and press CLEAR.
6 To programme other tracks, press </
M/m/, to select a step number, and
repeat steps 4 and 5.
7 Press H.
Programme play starts.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Press the number buttons to select the
number of the album or track you
want.
Searching for an Audio
Track
If you make a mistake, select another
number.
CD DATA DVD DATA CD
5 Press ENTER.
The recorder starts playback from the
selected number.
You can search a disc by album or track. As
albums and tracks are assigned individual
numbers, select the album or track by
entering its number.
z Hint
You can select an album or track using M/m in step
4.
Number
buttons
PLAY
MODE
</M/m/,,
ENTER
1 Press PLAY MODE during playback.
The “Play Mode” menu appears.
2 Select “Search Mode,” and press
ENTER.
3 Select a search method, and press
ENTER.
“Album Search” (except for CD)
“Track Search”
The display for entering the number
appears.
Example: Album Search
70
Download from Www.Somanuals.com. All Manuals Search And Download.
12-Photo List (Example: DVD)
JPEG Image Files
Using the “Photo Album”
List
You can play JPEG image files on DATA
DVDs/DATA CDs using the “Photo Album”
list.
m
4-Photo List
ANGLE
ZOOM
SYSTEM
MENU
</M/m/,,
ENTER
O
RETURN
.
>
x
H
X
m
1-Photo List
1 Press SYSTEM MENU.
The System Menu appears.
2 Select “Photo Album,” and press
ENTER.
The “Photo Album” list appears.
3 Select an album using M/m, and press
ENTER.
To show the 4-Photo List or 1-Photo List,
press < to select “Title View,” and
press ENTER, then select “4 Photos” or
“1 Photo” using M/m, and press ENTER.
A Album name
B Album size
,continued
71
Download from Www.Somanuals.com. All Manuals Search And Download.
C Sub-menu:
To reload the files or folders
Press , to display the sub-menu.
When a disc contains 1,000 or more files and/
or 100 or more folders, select “Read next” in
the “Photo Album” list, and press ENTER to
view unloaded files or folders.
It may take a few minutes to load files or
folders.
The sub-menu displays options
applicable only to the selected item. The
displayed options differ depending upon
the model, situation, and disc type.
b Note
The thumbnail for a file that cannot be playable on
the recorder is displayed as “ .”
Viewing a JPEG image file
Sub-menu
D Scroll bar:
The “Photo Album” list appears.
Switch to the album list, if necessary.
Appears when all of the JPEG image files
do not fit on the list. To view the hidden
JPEG image files, press M/m.
2 Select a JPEG image file using M/m,
and press ENTER.
E Album and JPEG image file
information:
The selected JPEG image file is
displayed on the entire screen.
Displays the image, JPEG image file
number, recording date and time, JPEG
image file name, and JPEG image file
size.
To display the detailed information
1
2
Select a JPEG image file, and press ,.
Select “Detailed Information,” and press
ENTER.
The detailed information for the selected
JPEG image file appears.
To scroll the list display by page (Page
mode)
Press ./> while the “Photo Album”
list is displayed. Each time you press ./
>, the entire “Photo Album” list changes
to the next/previous page of albums/JPEG
image files.
Playing a slideshow
To switch between the album list and
JPEG image file list
The “Photo Album” list appears.
Switch between the album list and JPEG
image file list, if necessary.
1
2
3
Press < while the “Photo Album” list is
displayed.
2 Select an album or JPEG image file
Select “Display Mode” using M/m, and
press ENTER.
using M/m, and press H.
The slideshow starts.
Select “File” or “Album” using M/m, and
press ENTER.
If you press H while selecting a JPEG
image file, the slideshow starts from the
selected JPEG image file.
To turn off the “Photo Album” list
Press SYSTEM MENU.
To stop a slideshow
Press x (stop) or O RETURN.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
To pause a slideshow
Press X (pause).
To view the next/previous image during a
slideshow
Press ./>.
To zoom an image
Press ZOOM repeatedly during a slideshow.
Each time you press ZOOM, the
magnification changes as shown below.
2× t 4× t normal magnification
You can move the area you want to zoom
using </M/m/,.
To rotate an image
Press ANGLE repeatedly during a slideshow.
Each time you press ANGLE, the image turns
clockwise by 90°.
z Hint
You can start a slideshow by selecting “Start
Slideshow” from the sub-menu.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Format
You can manually re-format a DVD+RW,
DVD-RW, or DVD-R disc to make a blank
disc.
Settings and Adjustments
Disc Settings (Disc
Setup)
Finalise
Finalises a disc to play it on other DVD
equipment.
The “Disc Setup” setup allows you to adjust
DVD related settings.
Press DISC SETUP.
The “Disc Setup” setup appears with the
following options. The default settings are
underlined.
z Hint
You can also display the Disc Setup display by
selecting “Disc Setup” from the System Menu.
Basic
Input Disc Name
You can label a disc.
Protect Disc
You can protect a disc against erasure.
Format DVD-RW (DVD-RW only)
The recorder automatically starts formatting
in VR mode or Video mode, whichever is
selected below, when a new, unformatted
DVD-RW is inserted.
VR Mode
Automatically formats the disc
in VR mode.
Video
Mode
Automatically formats the disc
in Video mode.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Press m to select “Start,” and press
ENTER.
Recorder Settings
(Basic)
• If the recorder does not receive a time
signal from any station, press
O RETURN and set the clock
manually.
• If the Auto Clock Set function did not
set the clock correctly for your local
area, try another station for the Auto
Clock Set function or set the clock
manually.
The “Basic” setup helps you to make clock
and other recorder related settings.
1 Press SYSTEM MENU while the
recorder is in stop mode.
2 Select “Initial Setup,” and press
ENTER.
b Note
The Auto Clock Set function does not work while
the recorder is standing by for Synchro-Recording.
3 Select “Basic,” and press ENTER.
The “Basic” setup appears with the
following options. The default settings
are underlined.
Manual (Manual Clock Set)
Set the clock manually.
To turn off the display, press SYSTEM
MENU.
1
Select “Clock Setting” in “Basic,” and
press ENTER.
2
Select “Manual,” and press ENTER.
Clock Setting
3
4
Press </, to select the time zone for
your area, and press m.
Auto (Auto Clock Set)
Turns on the Auto Clock Set function when a
programme position in your local area
broadcasts a time signal.
Select “On” using </, if you are now
on summer time, and press ENTER.
1
2
Select “Clock Setting” in “Basic,” and
press ENTER.
Select “Auto,” and press ENTER.
3
Press </, repeatedly until the
programme position of the station that
carries a time signal appears.
,continued
75
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
Press M/m to set the day, and press ,.
Set the month, year, hour, and minutes in
sequence. Press </, to select the item
to be set, then press M/m to set the
numbers. The day of the week is set
automatically.
HELP Setting
On
Displays Help information for
GUI displays.
Off
Does not set to HELP setting
mode.
To change the numbers, press < to
return to the item to be changed, and
press M/m.
Easy Setup (Resetting the Recorder)
Select this to run the “Easy Setup”
programme.
Press ENTER to start the clock.
1
Select “Easy Setup” in “Basic,” and press
ENTER.
Input Line System
Selects the colour system when recording
from the connected equipment.
2
3
Select “Start,” and press ENTER.
Follow the instructions for “Easy Setup”
(page 20) from step 2.
NTSC
Records in NTSC or PAL-60
colour system.
PAL/
SECAM
Records in PAL or SECAM
colour system.
b Note
When picture noise appears after you change the
“Input Line System” setting, change the “Input
still appears, hold down x (stop) on the recorder,
and press INPUT on the recorder.
Power Save
Selects whether this recorder is in power save
mode when the power is turned off (standby).
Mode 1
Only antenna input signals are
output to the connected TV
when the recorder is in standby.
Mode 2
Off
No input signals are output
when the recorder is in standby.
Does not set to power save
mode. Normally, select this
setting.
b Note
Power Save mode does not function in the
following cases, even when “Power Save” is set to
“Mode 1” or “Mode 2.”
– Synchro-Recording is set.
– There is a timer setting with “VPS/PDC” set to
“On” in the Timer List.
– The SMARTLINK features are not available
when “Power Save” is set to “Mode 1” or “Mode
2.”
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from TV
If you connect a TV to this recorder with
SMARTLINK, you can preset programme
positions by downloading from your TV.
For details, refer to the operating instructions
supplied with your TV.
Aerial Reception
Settings (Tuner)
The “Tuner” setup helps you to make tuner
and programme position settings for the
recorder.
1
Select “Download from TV,” and press
ENTER.
2
Select your country/region using </,,
and press ENTER.
1 Press SYSTEM MENU while the
recorder is in stop mode.
The tuner preset data will be downloaded
from your TV to this recorder.
If any programme positions are unused
or contain unwanted channels, you can
2 Select “Initial Setup,” and press
ENTER.
3 Select “Tuner,” and press ENTER.
The “Tuner” setup appears with the
following options. The default settings
are underlined.
Manual CH Setting
To turn off the display, press SYSTEM
MENU.
Presets programme positions manually.
If some programme positions could not be set
using the “Easy Setup” function, you can set
them manually.
If there is no sound or if the picture is
distorted, the wrong tuner system may have
been preset during “Easy Setup.” Set the
correct tuner system manually in the steps
below.
1
Select “Manual CH Setting” in “Tuner,”
and press ENTER.
2
3
Select “Next Screen,” and press ENTER.
Auto Channel Setting
Select your country/region using </,,
and press ENTER.
Auto Scan
If you connect a TV to this recorder not using
SMARTLINK, you can preset programme
positions automatically using “Auto Scan.”
Programme position
1
Select “Auto Channel Setting” in
“Tuner,” and press ENTER.
2
3
Select “Auto Scan,” and press ENTER.
Select your country/region using </,,
and press ENTER.
The programme position order will be set
according to the country/region you set.
If any programme positions are unused
or contain unwanted channels, you can
4
5
Press ./> to select the programme
position.
Select the item you want to change using
M/m, and change the settings using </
,, then press ENTER.
• To preset another programme position,
repeat from step 4.
,continued
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Skip
Name
Changes or enters a new station name (up to
5 characters). The recorder must receive
programme position information (e.g.,
SMARTLINK information) for station
names to appear automatically.
Press ,, then press </, repeatedly to
select a character.
On
Select this when the
programme position is unused
or contains unwanted channels.
The selected position will be
skipped when you press PROG
+/–.
Off
Does not skip the selected
programme position.
To change the characters, press M/m to move
the cursor, and press </,.
Decoder
CH System
Sets the external decoder (PAY-TV/Canal
Plus analogue decoder) channels.
Select the region to get the best broadcast
reception.
FR
Select this when in France.
Channel
Western
Euro
Select this when in West
European countries.
Press </, repeatedly until the programme
position you want is displayed.
• To select a cable or satellite programme
position, press </, until the programme
position you want is displayed.
UK & IE
Select this when in Great
Britain/Ireland.
Eastern
Euro
Select this when in East
European countries.
Receivable channels
TV system
Channel coverage
AFT
BG (West European E2 – E12 VHF
Countries, except
Italia A – H VHF
those listed below)
On
Turns on the Auto Fine Tuning
function.
Normally select this position.
E21 – E69 UHF
S1 – S20 CATV
Off
Allows you to adjust the
picture manually.
S21 – S41 HYPER
S01 – S05 CATV
• If the Auto Fine Tuning function does not
work effectively, select “Off” and press m.
Press </, to obtain a clearer picture, and
press ENTER.
DK (East European R1 – R12 VHF
Countries)
R21 – R69 UHF
S1 – S20 CATV
S21 – S41 HYPER
S01 – S05 CATV
Sound System
B/G
Select this when in West
European countries, except
those listed in “Receivable
I (Great Britain/
Ireland)
Ireland A – J VHF
South Africa 4 – 11, 13
VHF
B21 – B69 UHF
S1 – S20 CATV
S21 – S41 HYPER
S01 – S05 CATV
D/K
Select this when in East
European countries.
I
Select this when in Great
Britain/Ireland.
L
Select this when in France.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
TV system
Channel coverage
F2 – F10 VHF
Video Settings (Video In/
Out)
L* (France)
F21 – F69 UHF
B – Q CATV
The “Video In/Out” settings will adjust items
related to the image, such as size and colour.
Select the settings according to the type of
TV, tuner, or decoder connected to the DVD
recorder.
S21 – S41 HYPER
* To receive broadcasts in France, select “L.”
Channel Swapping
1 Press SYSTEM MENU while the
recorder is in stop mode.
After the programme positions have been set,
you can change the order of each programme
position in the display list.
2 Select “Initial Setup,” and press
ENTER.
1
2
Select “Channel Swapping” in “Tuner,”
and press ENTER.
3 Select “Video In/Out,” and press
ENTER.
Select “Next Screen,” and press ENTER.
The “Video In/Out” setup appears with
the following options. The default
settings are underlined.
3
4
Press M/m to select the programme
position number you want to swap, and
press ,.
• To display other pages, press ./
> repeatedly.
Input Colour System
Press M/m to select the programme
position number to swap for the one
selected in step 3, and press ENTER.
The programme position numbers are
swapped.
• To swap the programme position
number of another station, repeat from
step 3.
Selects the colour system when picture noise
appears after you change the “Input Line
Auto
Recorder automatically
detects signals of colour
systems and selects the
appropriate colour system.
PAL
Selects the PAL colour
system when “Input Line
System” is set to “PAL/
SECAM.”
Set VIDEO Plus+ CH
Sets the guide channel number assigned to
each channel.
You need to set this correctly to make timer
recordings with the VIDEO Plus+ function.
SECAM
Selects the SECAM colour
system when “Input Line
System” is set to “PAL/
SECAM.”
z Hint
When “Input Line System” is set to “NTSC,” you
can select “Auto,” “3.58NTSC,” or “PAL-60.”
,continued
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Component Video Out
LINE 1 In
Selects the signal format in which the
recorder outputs video signals: interlace or
progressive, from the COMPONENT
VIDEO OUT jacks.
Selects a method of inputting video signals
for the LINE 1/DECODER jack. The picture
will not be clear if this setting does not match
the type of video input signal.
Normal(Inter- Outputs signals in the
Video
Inputs video signals.
Inputs S-video signals.
Inputs RGB signals.
lace)
interlace format.
S-Video
RGB
Progressive
Outputs signals in the
progressive format. Select
this when you want to view
progressive signals.
Decoder
Select this when connecting
to an external decoder
(PAY-TV/Canal Plus
analogue decoder). If you
connect to a cable box/
satellite receiver such as
CanalSat, do not select this
option.
b Notes
• When you set “LINE 3 Out” to “RGB,” you
cannot set “Component Video Out.”
• When you connect the recorder to a monitor or
projector via only the COMPONENT VIDEO
OUT jacks, do not set “LINE 3 Out” to “RGB.” If
you set “LINE 3 Out” to “RGB,” in this case, the
picture may not appear.
NTSC on PAL TV
• When picture noise appears after you set the
recorder to progressive format, hold down x
(stop) on the recorder, and press Z (open/close)
on the recorder.
• No video signals are output when using the
HDMI connection.
Sets the recorder to convert signals of the
NTSC colour system to the PAL colour
system to play NTSC discs on PAL-only
TVs. Refer to the operating instructions
supplied with your TV.
On
Plays NTSC discs on PAL-
only TVs.
LINE 3 Out
Selects a method of outputting video signals
for the LINE 3 – TV jack.
Off
Select this if the connected
TV is a multi-system
(NTSC-compatible) TV.
Video
S-Video
RGB
Outputs video signals.
Outputs S-video signals.
Outputs RGB signals.
b Notes
• If your TV does not accept S-video or RGB
signals, the image will not be displayed in the
selected method on the TV screen even if you
select “S-Video” or “RGB.” See the instructions
supplied with your TV.
• SMARTLINK is available only when “Video” is
selected.
• RGB signals are not output when using the HDMI
connection.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
External Audio
Audio Input Settings
(Audio In)
Stereo
Select this when receiving
stereo programmes from
connected equipment.
Bilingual
Select this when receiving
bilingual programmes
from connected
The “Audio In” setup allows you to adjust the
sound according to the playback and
connection conditions.
equipment.
1 Press SYSTEM MENU while the
recorder is in stop mode.
Bilingual Recording
Selects the sound to be recorded.
2 Select “Initial Setup,” and press
ENTER.
A/L
Records the main sound
for the bilingual
programme.
3 Select “Audio In,” and press ENTER.
The “Audio In” setup appears with the
following options. The default settings
are underlined.
B/R
Records the sub sound for
the bilingual programme.
b Note
When recording a bilingual audio signal to a DVD-
RW/DVD-R in VR mode (except in PCM mode),
both audio channels are recorded and you can select
the sound when playing.
NICAM Select (page 42)
NICAM
Normally select this
position.
Standard
Select this if the sound from
NICAM broadcasts is not
clear.
Tuner Level
If the playback sound is distorted, set this
item to “Compression.” The recorder reduces
the audio output level.
This function affects the output of the
following jacks:
– LINE 2 OUT R-AUDIO-L jacks
– LINE 3 – TV jack
– LINE 1/DECODER jack
Normal
Normally select this
position.
Compression Select this when the
playback sound from the
speakers is distorted.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
DTS Output (DVD VIDEOs only)
Selects whether or not to output DTS signals.
Audio Output Settings
(Audio Out)
On
Select this when the
recorder is connected to an
audio component with a
built-in DTS decoder.
The “Audio Out” setup allows you to switch
the method of outputting audio signals when
you connect a component such as an
amplifier (receiver) with a digital input jack.
If you connect a component that does not
accept the selected audio signal, a loud noise
(or no sound) will come from the speakers,
and may affect your ears or cause speaker
damage.
Off
Select this when the
recorder is connected to an
audio component without a
built-in DTS decoder.
b Note
When HDMI output is performed to equipment not
compatible with DTS signals, the signals will not be
output regardless of the “DTS Output” setting.
1 Press SYSTEM MENU while the
recorder is in stop mode.
96 kHz PCM Output (DVD VIDEOs only)
Selects the sampling frequency of the audio
signal.
2 Select “Initial Setup,” and press
ENTER.
96 kHz ->
48 kHz
The audio signals of DVD
VIDEOs are converted to
48 kHz and output.
3 Select “Audio Out,” and press ENTER.
The “Audio Out” setup appears with the
following options. The default settings
are underlined.
96 kHz
All signals containing
96 kHz are output without
conversion. However, the
signals are output at 48 kHz
if copyright-protected
signals are contained.
b Notes
• “96 kHz PCM Output” setting has no effect when
audio signals are output from the LINE 2 OUT
(R-AUDIO-L) jacks or LINE 3 – TV/LINE 1/
DECODER jack. If the sampling frequency is
96 kHz, signals are simply converted to analogue
signals and output.
Dolby Digital Output (DVDs only)
Selects the type of Dolby Digital signal.
• If the HDMI OUT jack is connected to equipment
not compatible with 96 kHz signals, 48 kHz PCM
will be automatically output even when you select
“96 kHz.”
Dolby Digital Select this when the
recorder is connected to an
audio component with a
built-in Dolby Digital
decoder.
Dolby Digital Select this when the
-> PCM
recorder is connected to an
audio component lacking a
built-in Dolby Digital
decoder.
b Note
If the HDMI OUT jack is connected to equipment
not compatible with Dolby Digital signals, the
PCM signals will be automatically output even
when you select “Dolby Digital.”
82
Download from Www.Somanuals.com. All Manuals Search And Download.
MPEG Output (DVD VIDEOs only)
Selects the type of MPEG audio signal.
Language Settings
(Language)
MPEG
Select this when the
recorder is connected to an
audio component with a
built-in MPEG decoder.
The “Language” setup allows you to adjust
language settings.
MPEG ->
PCM
Select this when the
recorder is connected to an
audio component without a
built-in MPEG decoder. If
you play MPEG audio
sound tracks, the recorder
outputs stereo signals via
the DIGITAL OUT
1 Press SYSTEM MENU while the
recorder is in stop mode.
2 Select “Initial Setup,” and press
ENTER.
3 Select “Language,” and press ENTER.
The “Language” setup appears with the
following options. The default settings
are underlined.
(COAXIAL) jack.
b Note
If the HDMI OUT jack is connected to equipment
not compatible with MPEG audio signals, the PCM
signals will be automatically output even when you
select “MPEG.”
Audio DRC (Dynamic Range Control)
(DVDs only)
Selects the dynamic range (difference
between soft and loud sounds) setting when
playing a DVD that conforms to “Audio
DRC.” This affects the output from the
following jacks:
OSD Language
– LINE 2 OUT R-AUDIO-L jacks
– LINE 3 – TV jack
Switches the display language on the screen.
Audio Language (DVD VIDEO only)
– LINE 1/DECODER jack
– DIGITAL OUT (COAXIAL)/HDMI OUT
jack only when “Dolby Digital Output” is
Switches the language of the sound track.
Subtitle Language (DVD VIDEO only)
Switches the language of the subtitles
recorded on the disc.
On
Makes low sounds clear
even if you turn the volume
down.
Off
Normally select this
position.
,continued
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Language
The “Auto Language” function is available
when “Audio Language” and “Subtitle
Language” are set to the same language, and
“Subtitle Display” is set to “On.”
Recording Settings
(Recording)
The “Recording” setup allows you to adjust
recording settings.
On
For DVD VIDEOs whose
main audio track is the
language you set in “Audio
Language” and “Subtitle
Language,” the recorder
plays the main audio track
without subtitles.
For DVD VIDEOs whose
main audio track is not the
language you set in “Audio
Language” and “Subtitle
Language,” the recorder
plays the main audio track
with subtitles in the
1 Press SYSTEM MENU while the
recorder is in stop mode.
2 Select “Initial Setup,” and press
ENTER.
3 Select “Recording,” and press
ENTER.
The “Recording” setup appears with the
following options. The default settings
are underlined.
language you set.
Off
Turns off the function.
DVD Menu Language (DVD VIDEO only)
Switches the language for the DVD menu.
Select “w/Subtitle Language” to set the same
language as the language you set in “Subtitle
Language.”
Subtitle Display
Manual Rec. Mode
On
Off
Displays subtitles.
On (go to
setup)
Allows you to select all
recording modes.
Select this, and press
ENTER.
Does not display subtitles.
Assist Subtitle Displays special assistive
subtitles, where available.
Then, select a recording
mode using </,, and
press ENTER.
z Hint
If you select “Others” in “Audio Language,”
“Subtitle Language,” or “DVD Menu Language,”
Off
Allows you to select
standard recording modes
only.
b Note
If you select a language in “DVD Menu Language,”
“Subtitle Language,” or “Audio Language” that is
not recorded on the DVD VIDEO, one of the
recorded languages will be automatically selected.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual recording mode
Approx. recording time
(hours)
The table below shows the approximate
recording times for the different DVD types
in each manual recording mode, as well as the
standard recording mode equivalents.
Recording
mode
DVD+RW/
DVD-RW/ DVD+R DL/
DVD+R/
DVD-R
DVD-R DL
The recording time for DVDs
MN4 (SLP)
8
14 hr. 21 min.
17 hr. 57 min.
21 hr. 32 min.
24
Approx. recording time
(hours)
*2
*2
MN3 (SEP
)
10
12
Recording
mode
*2
DVD+RW/
DVD-RW/ DVD+R DL/
MN2
*2
MN1
13 hr.
DVD+R/
DVD-R
DVD-R DL
22 min.
*1
*1
Audio signals are recorded in 48kHz PCM
format, and video signals are recorded in HQ
mode. When recording a bilingual programme,
SEP, MN1, MN2, or MN3 mode is not available
for DVD+RWs/DVD+Rs/DVD+R DLs. When
recording to DVD+RWs/DVD+Rs, the
recording mode automatically switches to SLP
mode even if you set to SEP, MN1, MN2, or
MN3 mode.
PCM
1 hr. 1 min. 1 hr. 51 min.
1 hr. 1 min. 1 hr. 51 min.
1 hr. 5 min. 1 hr. 57 min.
1 hr. 10 min. 2 hr. 6 min.
1 hr. 15 min. 2 hr. 15 min.
1 hr. 20 min. 2 hr. 24 min.
1 hr. 25 min. 2 hr. 33 min.
1 hr. 30 min. 2 hr. 41 min.
1 hr. 35 min. 2 hr. 50 min.
1 hr. 40 min. 2 hr. 59 min.
1 hr. 45 min. 3 hr. 8 min.
1 hr. 50 min. 3 hr. 17 min.
MN32 (HQ)
MN31
*2
MN30
MN29
MN28
MN27
z Hint
MN26 (HSP)
MN25
Audio signals are recorded in Dolby Digital 2 ch
format (except for PCM mode).
MN24
Resolution
MN23
The first figure refers to when “Input Line
System” is set to “NTSC”; the second when
set to “PAL/SECAM” in the “Basic” setup
MN22
MN21 (SP)
MN20
2
3 hr. 35 min.
2 hr. 10 min. 3 hr. 53 min.
2 hr. 20 min. 4 hr. 11 min.
2 hr. 30 min. 4 hr. 29 min.
2 hr. 40 min. 4 hr. 47 min.
2 hr. 50 min. 5 hr. 5 min.
For DVD-RW (VR mode)/DVD-R (VR mode)
PCM, MN32 to MN16: 720 × 480 / 720 × 576
MN15 to MN12: 544 × 480 / 544 × 576
MN11 to MN9: 480 × 480 / 544 × 576
MN8 and MN7: 352 × 480 / 352 × 576
MN6 to MN1: 352 × 240 / 352 × 288
MN19
MN18 (LSP)
MN17
MN16
MN15 (ESP)
MN14
3
5 hr. 23 min.
For DVD+RW/DVD-RW (Video mode)/
DVD+R/DVD-R (Video mode)
PCM, MN32 to MN9: 720 × 480 / 720 × 576
MN8 and MN7: 352 × 480 / 352 × 576
MN6 to MN1: 352 × 240 / 352 × 288
3 hr. 10 min. 5 hr. 41 min.
3 hr. 20 min. 5 hr. 59 min.
3 hr. 30 min. 6 hr. 17 min.
3 hr. 40 min. 6 hr. 35 min.
3 hr. 50 min. 6 hr. 53 min.
MN13
MN12
MN11
MN10
MN9 (LP)
MN8
4
7 hr. 11 min.
4 hr. 30 min. 8 hr. 4 min.
MN7
5
6
7
8 hr. 58 min.
10 hr. 46 min.
12 hr. 34 min.
MN6 (EP)
MN5
,continued
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Rec. Mode Adjust
Auto Chapter (DVD+R/+RW) (DVD+RW/
DVD+R only)
On
Automatically adjusts the
recording mode to enable
the entire programme to be
recorded (page 44).
No
Separation
No chapter mark is inserted.
10 minutes
Inserts chapter marks at
approximately 10-minute
intervals.
Off
Turns off the function.
Set Thumbnail
Selects a scene for the thumbnail picture
shown in the Title List.
15 minutes
Inserts chapter marks at
approximately 15-minute
intervals.
0 seconds
30 seconds
3 minutes
The first frame of the title is
set for the thumbnail
picture.
The frame at 30 seconds
from the first frame is set for
the thumbnail picture.
The frame at 3 minutes from
the first frame is set for the
thumbnail picture.
Auto Chapter (VR) (DVD-RW/DVD-R in VR
mode only)
On
The recorder detects
changes in the picture and
sound and automatically
inserts chapter marks.
Off
No chapter mark is inserted.
b Note
The actual chapter mark interval may vary
depending on the amount of information contained
in the video to be recorded.
Auto Chapter (Video) (DVD-RW/DVD-R in
Video mode only)
No
No chapter mark is inserted.
Separation
10 minutes
Inserts chapter marks at
approximately 10-minute
intervals.
15 minutes
Inserts chapter marks at
approximately 15-minute
intervals.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
4:3 Letter Box
4:3 Pan Scan
16:9
Playback Settings
(Playback)
The “Playback” setup allows you to adjust
the playback settings.
1 Press SYSTEM MENU while the
recorder is in stop mode.
2 Select “Initial Setup,” and press
ENTER.
3 Select “Playback,” and press ENTER.
The “Playback” setup appears with the
following options. The default settings
are underlined.
b Note
Depending on the disc, “4:3 Letter Box” may be
selected automatically instead of “4:3 Pan Scan” or
vice-versa.
Pause Mode
Selects the picture quality in pause mode.
Field
Frame
Auto
Outputs a stable, generally
shake-free image.
Outputs a sharp image, but
may be prone to shake.
Outputs a generally less
sharp but more stable still
image.
TV Type
Select the playback picture size according to
the type of connected TV (wide-screen/wide
mode TV or conventional 4:3 screen TV).
Seamless Playback (DVD-RW/DVD-R in
VR mode only)
4:3 Letter Box Select this when connecting
to a 4:3 screen TV. Displays
a wide picture with bands
On
Playback is smooth, but
with a trade-off against the
accuracy of the edit points.
on the upper and lower
portions of the screen.
Off
You may notice momentary
interruption at edited points
during playback of a VR
mode Playlist.
4:3 Pan Scan Select this when connecting
to a 4:3 screen TV.
Automatically displays a
wide picture on the entire
screen and cuts off the
portions that do not fit.
16:9
Select this when connecting
to a wide-screen TV or TV
with a wide mode function.
,continued
87
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
Select “Code” (geographic area) as the
playback limitation level, and press
ENTER.
Parental Control (DVD VIDEO only)
Playback of some DVD VIDEOs can be
limited according to a predetermined level,
such as the age of the users. Scenes may be
blocked or replaced with different scenes.
The area is selected.
• When you select “Number,” press the
number buttons to select and enter a
country/area code in the table
(page 107), and press ENTER.
1
Select “Parental Control” in “Playback,”
and press ENTER.
When you have already registered a
password, go to step 4.
Select “Change Level,” and press
ENTER.
The “Parental Control : Change Level”
display appears.
2
Select “Set Password,” and press
ENTER.
The display for registering a new
password appears.
8
9
Enter your four-digit password using the
number buttons, and press ENTER.
3
4
Enter your four-digit password using the
number buttons, and press ENTER.
Select the level.
The lower the value, the stricter the
limitation.
Discs rated higher than the selected level
will be restricted.
10 Press ENTER.
The Parental Control setting is complete.
To cancel the Parental Control setting for
the disc, select “Off” in step 9.
Change Password
Select “Standard,” and press ENTER.
The “Parental Control : Standard”
display appears.
1
2
3
Select “Parental Control” in “Playback,”
and press ENTER.
Select “Change Password,” and press
ENTER.
Enter your four-digit password in the
“Current Password” row using the
number buttons, and press ENTER.
4
Enter a new password in the “New
Password” row using the number
buttons, and press ENTER.
5
Enter your four-digit password using the
number buttons, and press ENTER.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
b Notes
• If you forget your password, reset the recorder
• When you play discs which do not have the
Parental Control function, playback cannot be
limited on this recorder.
HDMI Settings (HDMI
Output)
• Depending on the disc, you may be asked to
change the Parental Control level while playing
the disc. In this case, enter your password, then
change the level.
The “HDMI Output” setup allows you to
adjust items related to the HDMI connection.
You can select “HDMI Output” only when
connecting equipment to the HDMI OUT
jack.
Angle Indicator (DVD VIDEOs only)
1 Press SYSTEM MENU while the
recorder is in stop mode.
On
Displays “
” on the TV
screen if various angles
(multi-angles) for a scene
are recorded on the disc.
2 Select “Initial Setup,” and press
ENTER.
Off
Does not display “
the TV screen.
” on
3 Select “HDMI Output,” and press
ENTER.
The “HDMI Output” setup appears with
the following options. The default
settings are underlined.
After connecting equipment to the HDMI
OUT jack, “Screen Resolution,” “4:3
Video Output,” and “Colour” are
automatically set to the appropriate
settings.
,continued
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen Resolution
4:3 Video Output
Selects the type of video signals output from
the HDMI OUT jack. If the picture is not
clear, natural or to your satisfaction, try
another option that suits the disc and your
TV/projector, etc. For details, refer also to the
instruction manual supplied with the TV/
projector, etc.
This setting is effective only when you set
“TV Type” to “16:9” in the “Playback” setup.
Adjust this setting to watch 4:3 aspect ratio
signals. If you can change the aspect ratio on
your TV, change the setting on your TV, not
this recorder.
Note that this setting is effective only for
HDMI connection.
1920 x 1080p Sends 1920×1080p video
signals.
Full
Select this when you can
change the aspect ratio on
your TV.
1920 x 1080i Sends 1920×1080i video
signals.
Normal
Select this when you cannot
change the aspect ratio on
your TV. Shows a 4:3 size
video with the aspect ratio
as it is.
1280 x 720p
Sends 1280×720p video
signals.
*1
720 x 576p
720 x 480p
Sends 720×576p video
signals.
*2
Sends 720×480p video
signals.
*1
720 x 576i
720 x 480i
Sends 720×576i video
signals.
16:9 aspect ratio TV
*2
Sends 720×480i video
signals.
Colour
Selects the method of outputting video
signals for the HDMI jack.
*1
*2
Can be selected only when “Input Line System”
is set to “PAL/SECAM” in the “Basic” setup
Can be selected only when “Input Line System”
RGB (0-255)
Outputs RGB (0-255)
signals. Select this when
connecting to an RGB (0-
255) device.
b Notes
RGB (16-235)
Outputs RGB (16-235)
signals. Select this if
colours appear overly rich
and the black appears too
deep.
• When picture noise appears after you change the
“Screen Resolution” setting, hold down x (stop)
on the recorder, and press Z (open/close) on the
recorder.
• When “Colour” is set to “YCbCr 4:2:2” in the
“HDMI Output” setup, you cannot select “720 x
576i” (or “720 x 480i”).
YCbCr 4:2:2
YCbCr 4:4:4
Outputs 10-bit YCbCr
4:2:2 component signals.
Outputs 8-bit YCbCr
4:4:4 component signals.
b Notes
• Some settings may not be available depending on
the connected device.
• When a DVI device is connected, you cannot
select “YCbCr 4:2:2” or “YCbCr 4:4:4.”
• When “Screen Resolution” is set to “720 x 576i”
(or “720 x 480i”) in the “HDMI Output” setup,
you cannot select “YCbCr 4:2:2.”
90
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Output
Selects the type of audio signal output from
the HDMI OUT jack.
Other Settings (Options)
The “Options” setup allows you to set up
other operational settings.
Auto
Outputs Dolby Digital,
MPEG and DTS audio
signals as a bitstream
signal. Normally select
this position.
1 Press SYSTEM MENU while the
recorder is in stop mode.
PCM
Converts all audio signals
except for DTS signals to
PCM.
2 Select “Initial Setup,” and press
ENTER.
3 Select “Options,” and press ENTER.
The “Options” setup appears with the
following options. The default settings
are underlined.
Bitstream
Priority
Select this if the
connected device is
compatible with bitstream
audio.
b Notes
• The PCM signals may not be output even when
you select “Auto” depending on the “Audio Out”
settings, number of audio channels, and the
HDMI-connected device.
• The “Audio Output” function is not available
when a DVI device is connected.
HDMI Control
On Screen Display
On
Allows you to use the
HDMI control features
On
Automatically displays
information on the screen
when the recorder is turned
on, etc.
Off
Turns off the function.
Off
Displays information only
when DISPLAY is pressed.
Front Panel Display
Adjusts the lighting of the front panel display.
On
Off
Bright lighting.
Turns off the lighting when
the power is off.
,continued
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Command Mode
SMARTLINK
Changes the Command Mode of the recorder
to avoid interference with your other Sony
DVD recorder or player.
ThisRecorder Allows you to use the
Only
SMARTLINK function
with the recorder when the
recorder is in standby mode.
1
2
Select “Command Mode” in “Options,”
and press ENTER.
Pass Through Allows you to use the
SMARTLINK function
Select a Command Mode (DVD1,
DVD2, or DVD3), and press ENTER.
with the connected
equipment when the
recorder is in standby mode.
b Note
The default command mode setting for this
recorder and the supplied remote is DVD3.
The remote does not function if different
command modes are set for the recorder and
remote. Set the same command mode.
b Note
Set “Power Save” to “Off” in the “Basic” setup
(page 76) to set “SMARTLINK” to “Pass
Through.”
3
Set the Command Mode for the remote
so it matches the Command Mode for the
recorder you set above.
Follow the steps below to set the
Command Mode on the remote.
1 Hold down ENTER.
2 While holding down ENTER, enter
the Command Mode code number
using the number buttons.
DivX
Registration Code
Displays the registration code of DivX video
files for this recorder.
For more information, go to http://
www.divx.com/vod on the Internet.
Command Mode Code number
DVD1
DVD2
DVD3
number button 1
number button 2
number button 3
3 Hold down both the number and
ENTER buttons at the same time for
more than three seconds.
z Hint
You can check the Command Mode for the recorder
in the front panel display.
Command
Mode
In the front panel
display
DVD1
DVD2
DVD3
“1” appears.
“2” appears.
Either “1” or “2” does not
appear.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture noise appears.
, If the picture output signal from your
recorder passes through your VCR to get to
your TV, or if you are connected to a
combination TV/VIDEO player, the copy-
protection signal applied to some DVD
programmes could affect picture quality. If
you still experience this problem even when
you connect your recorder directly to your
TV, try connecting your recorder to your
TV’s S VIDEO input.
, You have set the recorder to progressive
format even though your TV cannot accept
the progressive signal. In this case, hold
down x (stop) on the recorder, and press
Z (open/close) on the recorder.
Additional Information
Troubleshooting
If you experience any of the following
difficulties while using the recorder, use this
troubleshooting guide to help remedy the
problem before requesting repairs. Should
any problem persist, consult your nearest
Sony dealer.
Power
, Even if your TV is compatible with
progressive format (525p/625p) signals, the
image may be affected when you set the
recorder to progressive format. In this case,
hold down x (stop) on the recorder, and
press Z (open/close) on the unit and the
recorder is set to normal (interlace) format.
, You are playing a title recorded in a colour
system that is different from your TV.
, When playing a double-layer DVD, the
video and audio may be momentarily
interrupted at the point where the layers
switch.
The power does not turn on.
, Check that the mains lead is connected
securely.
Picture
There is no picture.
, Re-connect all connecting cords securely.
, The connecting cords are damaged.
, Switch the input selector on your TV (such
as to “VCR” and “AV 1”) so that the signal
from the recorder appears on the TV screen.
, Check that the “Video In/Out” setup is set
to the appropriate item that conforms to
your system (page 79).
There is no picture or picture noise appears
when connected to the HDMI OUT jack.
, Try the following: 1Turn the recorder off
and on again. 2Turn the connected
, If you connect the recorder to your TV via
only the COMPONENT VIDEO OUT
jacks, set “Component Video Out” in the
“Video In/Out” setup to “Progressive”
, When playing a double-layer DVD, the
video and audio may be momentarily
interrupted at the point where the layers
switch.
equipment off and on again. 3Disconnect
and then connect the HDMI cord again.
, If the HDMI OUT jack is used for video
output, changing the “Screen Resolution”
setting in the “HDMI Output” setup may
TV and the recorder using a video jack
other than HDMI OUT, and switch the
TV’s input to the connected video input so
that you can see the on-screen displays.
Change the “Screen Resolution” setting in
the “HDMI Output” setup, and switch the
TV’s input back to HDMI. If the picture still
does not appear, repeat the steps and try
other options.
, The recorder is connected to an input device
,continued
93
Download from Www.Somanuals.com. All Manuals Search And Download.
, When picture noise appears after you
change the “Screen Resolution” setting,
hold down x (stop) on the recorder, and
press Z (open/close) on the recorder.
The playback picture or TV programme
from the equipment connected through the
recorder is distorted.
, If the playback picture output from a DVD
player, VCR, or tuner goes through your
recorder before reaching your TV, the copy-
protection signal applied to some
TV programme reception does not fill the
screen.
, Set the channel manually in “Manual CH
, Select the correct source using the INPUT
button, or select a channel of any TV
programme using the PROG +/– buttons.
programmes could affect picture quality.
Disconnect the playback equipment in
question and connect it directly to your TV.
The picture does not fill the screen.
, Set “TV Type” in the “Playback” setup in
accordance with the screen size of your TV
TV programme pictures are distorted.
, Reorient the TV aerial.
, Adjust the picture (see the TV’s instruction
manual).
The picture does not fill the screen, even
though the picture size is set in “TV Type”
in the “Playback” setup.
, Place the recorder and TV farther apart.
, Place the TV and any bunched aerial cables
farther apart.
, The aerial cable is connected to the
AERIAL OUT jack on the recorder.
Connect the cable to the AERIAL IN jack.
, The recorder’s colour system is different
from your TV. Hold down x (stop) on the
recorder, and press INPUT on the recorder
to change the recorder’s colour system.
, The picture size of the title is fixed.
The picture is black and white.
, Check that “LINE 3 Out” in the “Video In/
Out” setup is set to the appropriate item that
, If you are using a SCART cord, be sure to
use one that is fully wired (21 pins).
TV channels cannot be changed.
, A timer recording started, which changed
the channels.
Sound
There is no sound.
, Re-connect all connections securely.
, The connecting cord is damaged.
, The input source setting on the audio
component or the connection to the audio
component is incorrect.
, The recorder is in reverse play, fast-
forward, slow motion, or pause mode.
, If the audio signal does not come through
the DIGITAL OUT (COAXIAL)/HDMI
OUT jacks, check the “Audio Out” setup
The picture from equipment connected to
the recorder’s input jack does not appear
on the screen.
, If the equipment is connected to the LINE
1/DECODER jack, select “L1” in the front
panel display by pressing INPUT.
If the equipment is connected to the LINE 2
IN jacks, select “L2” in the front panel
display by pressing INPUT.
, The recorder supports only MP3 audio,
Dolby Digital and MPEG audio for DivX
video files. Press AUDIO and select MP3
audio or MPEG audio.
94
Download from Www.Somanuals.com. All Manuals Search And Download.
, If you have connected an audio component
to the DIGITAL OUT (COAXIAL) jack
and want to change the audio track for
DVD-RWs/DVD-Rs (VR mode) during
playback, set “Dolby Digital Output” in the
“Audio Out” setup to “Dolby Digital ->
PCM” (page 82).
No sound is output from the HDMI OUT
jack.
, Try the following: 1Turn the recorder off
and on again. 2Turn the connected
equipment off and on again. 3Disconnect
and then connect the HDMI cord again.
, The HDMI OUT jack is connected to a DVI
device (DVI jacks do not accept audio
signals).
, The equipment connected to the HDMI
OUT jack does not conform to the audio
signal format. In this case, set “Audio
Output” to “PCM” in the “HDMI Output”
Playback
The recorder does not play any type of
disc.
, The disc is upside down. Insert the disc with
the labelled side facing up.
, The disc is not correctly inserted.
, Moisture has condensed inside the recorder.
In this case, if the recorder is on, leave it on
(if it is off, leave it off) for about an hour
until the moisture evaporates.
Sound distortion occurs.
, Set “Tuner Level” in the “Audio In” setup
, If the disc was recorded on another recorder
recorder cannot play the disc.
Sound is noisy.
, When playing a CD with DTS sound tracks,
noise will come from the LINE 2 OUT R-
AUDIO-L jacks, LINE 3 – TV jack, or
The recorder does not start playback from
the beginning.
, You have inserted a DVD whose Title menu
or DVD menu automatically appears on the
TV screen when it is first inserted. Use the
menu to start playback.
The sound volume is low.
, The sound volume is low on some DVDs.
The sound volume may improve if you set
“Audio DRC” in the “Audio Out” setup to
, Set “Tuner Level” in the “Audio In” setup
The recorder starts playing automatically.
, The DVD VIDEO features an auto
playback function.
An alternate audio track cannot be
recorded or played.
, When recording from connected
equipment, set “External Audio” to
“Bilingual” in the “Audio In” setup
Playback stops automatically.
, If the DVD has an auto pause signal, the
recorder stops playback at the auto pause
signal.
, Multilingual tracks (main and sub) cannot
be recorded on DVD+RWs, DVD-RWs
(Video mode), DVD+Rs, or DVD-Rs
(Video mode). To record the language, set
“Bilingual Recording” in the “Audio In”
setup to “A/L” or “B/R” before recording
(page 81). To record both the main and sub
sounds on a disc, record on DVD-RWs/
DVD-Rs (VR mode).
Some functions such as Stop, Search, or
Slow-motion Play cannot be performed.
, Depending on the DVD, you may not be
able to do some of the operations above. See
the instruction manual supplied with the
disc.
,continued
95
Download from Www.Somanuals.com. All Manuals Search And Download.
The language for the sound track cannot
be changed.
, Multilingual tracks are not recorded on the
DVD being played.
The MP3 audio tracks do not play.
, The MP3 audio tracks are not recorded in a
format that the recorder can play
, The DVD VIDEO prohibits the changing of
the language for the sound track.
, Try changing the language using the DVD
VIDEO’s menu.
The JPEG image files do not play.
, The JPEG image files are not recorded in a
format that the recorder can play
, Progressive JPEG images cannot be played.
The subtitle language cannot be changed
or turned off.
, Multilingual subtitles are not recorded on
the DVD VIDEO.
, The DVD VIDEO prohibits changing of the
subtitles.
Recording/Timer recording/
Editing
, Try changing the subtitle using the DVD
VIDEO’s menu.
, The subtitles cannot be changed for the
titles recorded on this recorder.
The programme position cannot be
changed from the programme position you
are recording.
, Set the TV’s input source to “TV.”
The angles cannot be changed.
, Multi-angles are not recorded on the DVD
VIDEO being played.
Recording does not start immediately
after you press z REC.
, Operate the recorder only after “LOAD,”
“FORMAT,” or “INFO WRITE”
, You are trying to change the angles when
“
” does not appear on the TV screen
disappears from the front panel display.
angles (multi-angles) for a scene are
recorded on the disc, set “Angle Indicator”
, The DVD VIDEO prohibits changing
angles.
Nothing was recorded even though you set
the timer setting correctly.
, There was a power failure during recording.
, The recorder’s internal clock stopped due to
a power failure that lasted for more than 1
, Try changing the angle using the DVD
VIDEO’s menu.
, The channel was disabled after the timer
recording was set. See “Manual CH
, Disconnect the mains lead from the mains,
and connect it again.
, The angles cannot be changed for the titles
recorded on this recorder.
, The angles cannot be changed during slow
motion playback or when playback is
paused.
, The programme contains copy protection
signals that restrict copying.
, Another timer setting overlapped the timer
, There is no DVD inside the recorder.
, There is not enough disc space for the
recording.
The DivX video files do not play.
, The file is not created in DivX format.
, The file has an extension other than “.avi”
or “.divx.”
, The DATA CD (DivX video)/DATA DVD
(DivX video) is not created in a DivX
format that conforms to ISO9660 Level 1/
Level 2, Romeo, Joliet, or UDF (Universal
Disk Format) 1.02, 1.50, 2.00, or 2.01.
, The DivX video file format is larger than
720 (width) × 576 (height).
96
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording does not stop immediately
after you press x REC STOP.
, It will take a few seconds for the recorder to
input disc data before recording can stop.
On-screen instructions may appear after
pressing x REC STOP. In this case, follow
the on-screen instructions.
Recording from the connected
equipment with a timer
Nothing was recorded even though you set
the Synchro-Recording setting correctly.
, You forgot to turn off the connected
equipment. Turn off the connected
equipment and set the recorder to Synchro-
Recording standby mode (page 49).
Recording does not stop after you press
x.
, The recorder was not set to the Synchro-
Recording standby mode. Set the recorder
to stand by for Synchro-Recording. Make
sure the SYNCHRO REC indicator lights
, The equipment is not connected to the LINE
1/DECODER jack of the recorder.
, The recorder is connected to the TV output
jack of the connected equipment.
, The Synchro-Recording and another timer
, Press x REC STOP.
Timer recording is not complete or did not
start from the beginning.
, There was a power failure during recording.
If the power recovers when there is a timer
recording, the recorder resumes recording.
Should the power failure continue for more
, Another timer setting overlapped the timer
, Disc space was not sufficient.
, The VPS/PDC function is working.
Synchro-Recording does not complete.
, The timer setting for the connected
equipment overlapped the recorder’s timer
, There was a power failure during the
recording.
Contents previously recorded were
erased.
, Data that is not playable on this recorder but
was recorded on a DVD with a PC will be
erased from the disc when the disc is
inserted.
, The [/1 button was pressed before
Synchro-recording started.
Therecorderautomaticallystarts recording
when the satellite receiver is turned on.
, The Synchro Rec function was activated.
Turn off the satellite receiver and cancel the
Synchro Rec function (page 49).
The VPS/PDC function does not operate.
, Check that the clock and date are set
correctly.
, Check that the VPS/PDC time you set is
correct (there might be a mistake in the TV
programme guide). If the broadcast you
wanted to record did not send the correct
VPS/PDC information, the recorder will not
start recording.
Display
The clock has stopped.
, If the reception is poor, the VPS/PDC signal
might be altered and the recorder might not
start recording.
, The clock stopped due to a power failure
that lasted for more than 1 hour. Reset the
clock (page 75).
The timer indicator is flashing.
, The disc does not have enough space.
, Insert a recordable disc into the recorder.
,continued
97
Download from Www.Somanuals.com. All Manuals Search And Download.
The clock does not appear in the front panel
display when the recorder is turned off.
, “Front Panel Display” is set to “Off” in the
The disc tray does not open after you press
Z (open/close).
, It may take a few seconds for the disc tray
to open after you have recorded or edited a
DVD. This is because the recorder is adding
disc data to the disc.
Remote control
Any buttons do not function and “LOCKED”
appears in the front panel display.
, The recorder is locked. Cancel the Child
The remote does not function.
, Different command modes are set for the
recorder and remote. Set the same
command mode setting for this recorder and
the supplied remote is DVD3. You can
check the current command mode in the
front panel display (page 92).
The disc tray does not open and
“TRAYLOCKED” appears in the front panel
display.
, Contact your Sony dealer or local
authorized Sony service facility.
, The batteries are weak.
, The remote is too far from the recorder.
, The remote’s manufacturer code returned to
the default setting when you replaced the
, The remote is not pointed at the remote
sensor on the recorder.
“REPAIR” appears in the front panel
display.
, The recorder’s repair function is activated
to repair the disc. Leave the recorder on
until “REPAIR” disappears from the front
panel display. Some data may be lost even
if the repair function is activated.
Others
Display language on the screen switches
automatically.
, When “HDMI Control” is set to “On” in the
display language on the screen
“HDCP_ERR” appears in the front panel
display.
, The recorder is connected to an input device
that is not HDCP compliant. Connect the
equipment that is HDCP compliant
automatically switches, according to the
language setting of the connected TV, if
you change the language settings on your
TV, etc.
Disregard this error message if the output
picture is displayed correctly.
The recorder does not operate properly.
, Press down [/1 on the recorder for more
than five seconds until the recorder turns
off. Then, press [/1 again to turn on the
recorder.
, When static electricity, etc., causes the
recorder to operate abnormally, turn off the
recorder and wait until the clock appears in
the front panel display. Then, unplug the
recorder and after leaving it off for a while,
plug it in again.
Mechanical sounds are heard when the
recorder is off.
, While the recorder is adjusting the clock for
the Auto Clock Set function, operational
noises may be heard, even when the power
is off. This is not a malfunction.
98
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes about the discs
• To keep the disc clean, handle the disc by its
edge. Do not touch the surface. Dust,
fingerprints, or scratches on the disc may
cause it to malfunction.
Resetting the Recorder
You can reset the recorder to all its factory
settings.
1 Make sure that the recorder is turned
on and remove the disc.
2 Hold down x (stop) on the recorder
and press [/1 on the recorder.
All settings are reset and the recorder
turns off.
• Do not expose the disc to direct sunlight or
heat sources such as hot air ducts, or leave
it in a car parked in direct sunlight as the
temperature may rise considerably inside
the car.
• After playing, store the disc in its case.
• Clean the disc with a cleaning cloth. Wipe
the disc from the centre out.
Notes About This
Recorder
On operation
• If the recorder is brought directly from a
cold to a warm location, or is placed in a
very damp room, moisture may condense
on the lenses inside the recorder. Should
this occur, the recorder may not operate
properly. In this case, if the recorder is on,
leave it on (if it is off, leave it off) for about
an hour until the moisture evaporates.
• When you move the recorder, take out any
discs to avoid damaging the disc.
• Do not use solvents such as benzine,
thinner, commercially available cleaners, or
anti-static spray intended for vinyl LPs.
• Do not use the following discs.
– A disc that has a non-standard shape (e.g.,
card, heart).
– A disc with a label or sticker on it.
– A disc that has cellophane tape or sticker
adhesive on it.
On adjusting volume
On replacement of parts
Do not turn up the volume while listening to
a section with very low level inputs or no
audio signals. If you do, the speakers may be
damaged when a peak level section is played.
In the event that this unit is repaired, repaired
parts may be collected for reuse or recycling
purposes.
On cleaning
Clean the cabinet, panel, and controls with a
soft cloth slightly moistened with a mild
detergent solution. Do not use any type of
abrasive pad, scouring powder or solvent
such as alcohol or benzine.
On cleaning discs, disc/lens cleaners
Do not use cleaning discs or disc/lens
cleaners (including wet or spray types).
These may cause the recorder to
malfunction.
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Inputs and outputs
LINE 2 OUT
Specifications
(AUDIO): Phono jack/2 Vrms/10 kilohms
(VIDEO): Phono jack/1.0 Vp-p
(S VIDEO): 4-pin mini DIN/Y: 1.0 Vp-p,
C: 0.3 Vp-p (PAL)
LINE 2 IN
(AUDIO): Phono jack/2 Vrms/more than
22 kilohms
(VIDEO): Phono jack/1.0 Vp-p
(S VIDEO): 4-pin mini DIN/Y: 1.0 Vp-p,
C: 0.3 Vp-p (PAL)
System
Laser: Semiconductor laser
Channel coverage:
PAL/SECAM (B/G, D/K, I, L)
VHF: E2 to E12, R1 to R12, F2 to F10,
Italian A to H, Ireland A to J, South
Africa 4 to 11, 13
UHF: E21 to E69, R21 to R69, B21 to
B69, F21 to F69
CATV: S01 to S05, S1 to S20, France
B to Q
HYPER: S21 to S41
LINE 3 – TV: 21-pin
CVBS OUT
S-Video/RGB OUT (upstream)
LINE 1/DECODER: 21-pin
CVBS IN/OUT
S-Video/RGB IN
Decoder
DIGITAL OUT (COAXIAL): Phono jack/
0.5 Vp-p/75 ohms
The above channel coverage merely ensures
the channel reception within these ranges. It
does not guarantee the ability to receive
signals in all circumstances. For details, see
COMPONENT VIDEO OUT
(Y, PB/CB, PR/CR):
Video reception: Frequency synthesizer
system
Audio reception: Split carrier system
Aerial out: 75-ohm asymmetrical aerial
socket
Phono jack/Y: 1.0 Vp-p,
P
B/CB: 0.7 Vp-p, PR/CR: 0.7 Vp-p
HDMI OUT: HDMI 19-pin-Standard
Connector
Timer: Clock: Quartz locked/Timer
indication: 24-hour cycle (digital)/
Power back-up duration: 1 hour
Video recording format: MPEG-2,
MPEG-1
Audio recording format/applicable
bit rate: Dolby Digital 2 ch
256 kbps/128 kbps (in EP, SLP, and
SEP mode), PCM
General
Power requirements: 220-240 V AC,
50/60 Hz
Power consumption: 22 W
Dimensions (approx.):
430 × 66.5 × 286 mm (width/height/
depth) incl. projecting parts
Mass (approx.): 3.6 kg
Operating temperature: 5ºC to 35ºC
Operating humidity: 25% to 80%
Supplied accessories:
Mains lead (1)
Aerial cable (1)
Remote commander (remote) (1)
R6 (size AA) batteries (2)
Specifications and design are subject to
change without notice.
100
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 audio tracks, JPEG image
files, or DivX video files that
the recorder can play
Notes on MP3 Audio
Tracks, JPEG Image
Files, and DivX Video
Files
The recorder can play the following tracks
and files:
– MP3 audio tracks with the extension
“.mp3.”
– JPEG image files with the extension “.jpeg”
or “.jpg.”
About MP3 audio tracks, JPEG
image files, and DivX video
files
– Baseline JPEG image files that conform to
the Exif 2.2* image files format, and
Y:CB:CR is 4:4:4, 4:2:2, or 4:2:0.
– DivX video files with the extension “.avi”
or “.divx.”
MP3 is an audio compression technology that
satisfies certain ISO/MPEG regulations.
JPEG is an image compression technology.
You can play MP3 (MPEG1 Audio Layer 3)
format audio tracks and JPEG image files on
DATA CDs (CD-ROMs/CD-Rs/CD-RWs)
or JPEG image files on DATA DVDs (DVD-
ROMs/DVD-RWs/DVD-Rs).
* “Exchangeable Image File Format”: The file
format used by digital still cameras.
z Hint
Since a disc with many trees takes longer to start
playback, it is recommended that you create albums
with no more than two trees.
®
DivX is a video file compression
technology, developed by DivX, Inc. This
product is an official DivX Certified
b Notes
®
• The recorder will play any data with the extension
“.mp3,” “.jpeg,” “.jpg,” “.avi,” or “.divx” even if
they are not in MP3, JPEG, or DivX format.
Playing these data may generate a loud noise
which could damage your speaker system.
• Depending on the disc, normal playback may not
be possible. For example, the picture may be
unclear, playback may not appear smooth, the
sound may skip, and so on.
product. You can play DATA CDs (CD-
ROMs/CD-Rs/CD-RWs) and DATA DVDs
(DVD-ROMs/DVD+RWs/DVD+Rs/DVD-
RWs/DVD-Rs) that contain DivX video files.
DATA DVDs must be recorded according to
ISO9660 Level 1, Level 2, Romeo, Joliet, or
UDF (Universal Disk Format) 1.02, 1.50,
2.00*, or 2.01 format for the recorder to
recognise the MP3 tracks, JPEG image files,
and DivX video files.
• Depending on the disc, playback may take some
time to start.
• Some files cannot be played.
DATA CDs must be recorded according to
ISO9660 Level 1, Level 2, Romeo, or Joliet
format for the recorder to recognise the MP3
tracks, JPEG image files, and DivX video
files.
You can also play discs recorded in
MultiSession/Border.
See the instructions supplied with the disc
drives and the recording software (not
supplied) for details on the recording format.
• For MP3 audio tracks and DivX video files, the
recorder can play up to 99 albums each on a
DATA CD or DATA DVD. Up to 99 tracks and
files under an album can be played.
• For JPEG image files, the recorder can load up to
99 albums and/or up to 999 files under an album
on a DATA CD/DATA DVD at a time. To view
unloaded albums, reload them.
• Proceeding to the next or another album may take
some time.
• The image size that can be displayed is limited.
The following image sizes can be displayed:
width 160–5,120 pixels by height 120–3,840
pixels.
* Not available for MP3 audio tracks.
• This recorder supports MP3 audio tracks
recorded with a sampling frequency of 32 kHz,
44.1 kHz, and 48 kHz.
• No more than a 1 GB MP3 audio track can be
played.
Note on MultiSession/Border discs
If audio tracks and images in Music CD
format or Video CD format are recorded in
the first session/border, only the first session/
border will be played back.
• The recorder does not conform to audio tracks in
mp3PRO format.
,continued
101
Download from Www.Somanuals.com. All Manuals Search And Download.
• The recorder cannot play a DivX video file of a
size larger than 720 (width) × 576 (height)/4 GB.
• The recorder may not play a DivX video file
when the file has been combined from two or
more DivX video files.
102
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to Parts and Controls
For more information, see the pages in parentheses.
Remote
1
4
7
2
5
8
0
3
6
9
74)
TIMER button (43)
S
/
(instant replay/instant
advance) buttons (54)
67)
U mc
/
CM (search/slow/
The H button has a tactile dot*.
REC MODE button (29)
The + button has a tactile dot*.
The number 5 button has a tactile dot*.
wj TV PROG (programme) +/– buttons
The AUDIO button has a tactile dot*.
The + button has a tactile dot*.
* Use the tactile dot as a reference when operating
the recorder.
,continued
103
Download from Www.Somanuals.com. All Manuals Search And Download.
Front panel
B
(remote sensor) (18)
The + button has a tactile dot*.
L LINE 2 IN (S VIDEO/VIDEO/
L(MONO) AUDIO R) jacks (24)
The N button has a tactile dot*.
* Use the tactile dot as a reference when operating
the recorder.
Front panel display
F Disc type
Lights when a recordable DVD-R or
DVD-RW disc is loaded.
B Displays the following:
• Playing time
Displays the Command Mode of the
remote.
• Current title/chapter/track/index
number
• Recording time/recording mode
• Clock
When the Command Mode for the
recorder is set to DVD3 (default), either
“1” or “2” does not appear.
• Programme position
H Recording status
I Playing status
104
Download from Www.Somanuals.com. All Manuals Search And Download.
Country/Area Code
Number
Area (Code)
Number
Area (Code)
0118
0121
0120
0205
0218
0301
0312
0314
0411
0609
0618
0405
0811
0914
0904
0920
1016
1118
Argentina (ar)
Australia (au)
Austria (at)
Belgium (be)
Brazil (br)
Canada (ca)
Chile (cl)
1325
1324
1412
1426
1415
1611
1608
1620
1821
1907
0519
1905
0308
2023
2008
0702
2119
Malaysia (my)
Mexico (mx)
Netherlands (nl)
New Zealand (nz)
Norway (no)
Pakistan (pk)
Philippines (ph)
Portugal (pt)
Russia (ru)
Singapore (sg)
Spain (es)
Sweden (se)
Switzerland (ch)
Taiwan (tw)
Thailand (th)
United Kingdom (gb)
USA (us)
China (cn)
Denmark (dk)
Finland (fi)
France (fr)
Germany (de)
Hong Kong (hk)
India (in)
Indonesia (id)
Italy (it)
Japan (jp)
Korea (kr)
107
Download from Www.Somanuals.com. All Manuals Search And Download.
B
D
Index
DATA CD 9
Batteries 18
DATA DVD 9
DIGITAL OUT
(COAXIAL) 16
“Bilingual Recording” 81
Bilingual recording 42
‘BRAVIA’ Theatre Sync
Words in quotations appear
in the on-screen displays.
Numerics
“16:9” 87
“4:3 Letter Box” 87
“4:3 Pan Scan” 87
“96 kHz PCM Output” 82
C
Canal Plus 26
Disc space 61
DivX video files 52
CD 9
“CH System” 78
“Channel” 78
A
“Channel Swapping” 79
Chapter number 33
“Chapter Search” 59
Checking/changing/
cancelling timer settings
(Timer List) 48
COMPONENT VIDEO
OUT 14
“A-B Erase” 62
Adjusting
playback picture 57
recording picture 46
Aerial 12
“DVD Menu Language”
“AFT” 78
DVD VIDEO 9
DVD-RAM 9
“Album Search” 70
Audio cord 16
“Audio DRC” 83
“Audio In” 81
“Component Video Out”
Connecting
E
Audio input 17
“Audio Language” 83
“Audio Out” 82
“Auto” 75
the aerial cable 12
the audio cords 16
“Edit” 61
chapters 63
“Auto Channel Setting”
Playlist 64
titles 61
Enter characters 34
“External Audio” 81
the video cords 13
Controlling TVs with the
remote 18
Copy control signals 42
Copy-Free 42
Copy-Never 42
Copy-Once 42
Country/Area code 107
CPRM 8
“Auto Chapter (DVD+R/
+RW)” 86
“Auto Chapter (Video)” 86
“Auto Chapter (VR)” 86
“Auto Language” 84
Creating a Playlist 64
108
Download from Www.Somanuals.com. All Manuals Search And Download.
F
L
P
“Finalise” 37
Labelling 36
Parts and controls 103
“Pause Mode” 87
PAY-TV 26
Finalising 37
“Format” 40
“Language” 83
“LINE 1 In” 80
LINE 1/DECODER 23
LINE 2 IN 24
“LINE 3 Out” 80
“Format DVD-RW” 74
Formatting 40
Freeze Frame 55
Front panel 104
“Front Panel Display” 91
Front panel display 104
PBC 52
PDC 44
“Photo Album” list 71
M
Mains lead 17
H
“Manual” 75
Handling discs 99
HDMI
“Manual CH Setting” 77
“Manual Rec. Mode” 84
Manual recording mode 85
MENU 52
Play mode
“4:3 Video Output”
“Audio Output” 91
“Colour” 90
“HDMI Control” 91
“Screen Resolution”
“Playback” 87
Menu
DVD’s Menu 52
Top menu 52
“Modify” 48
MP3 audio tracks 67
DivX video files 52
freeze frame 55
instant advance 54
instant replay 54
JPEG image files 71
MP3 audio tracks 67
resume play 53
rotate 73
“HDMI Output” 89
“HELP Setting” 76
N
I
“Name” 78
INPUT 51
“NICAM Select” 81
“NTSC on PAL TV” 80
“Input Colour System” 79
“Input Line System” 76
J
O
JPEG image files 71
“On Screen Display” 91
“Options” 91
scan audio 52
slow-motion play 55
zoom 73
“Power Save” 76
“Progressive” 21
“Protect” 62
“OSD Language” 83
“Protect Disc” 36
Protection
disc 36
title 62
,continued
109
Download from Www.Somanuals.com. All Manuals Search And Download.
Q
S
T
Quick guide to disc types 7
Quick Timer 46
S VIDEO 14
Thumbnail picture 32
“Time Search” 59
TIMER 43
Satellite tuner 25
Scan Audio 52
“Seamless Playback” 87
Searching
Timer List 48
Timer recording
check/change/cancel
R
Rear panel 105
REC 29
audio track 67
fast reverse/fast
REC MODE 41
REC STOP 29
Recordable discs 7
“Recording” 84
Recording 41
manual setting 43
“Rec. Mode Adjust”
JPEG image file 73
locatingthebeginning
of the title/
Synchro Rec 49
VIDEO Plus+ 45
Title 33
chapter/track
scan audio 52
Title List 31
picture adjustment 46
recording format 7
while watching
another
“Set VIDEO Plus+ CH” 21
Setting the VIDEO Plus+
programme positions 21
“Skip” 78
Thumbnail 32
“Title Name” 61
Title number 33
“Title Search” 59
TOP MENU 52
Troubleshooting 93
“Tuner” 77
“Tuner Level” 81
“TV Screen Size” 21
TV system 78
“TV Type” 87
“Skip Once” 48
Slideshow 72
programme 30
Region code 10
“Registration Code” 92
“Repeat Album” 68
“Repeat Chapter” 56
Slow-motion play 55
“Sound System” 78
“Standard (4:3)” 21
SUBTITLE 54
“Subtitle Display” 84
“Subtitle Language” 83
Super VIDEO CD 9
“S-Video” 80
U
“Undo” 62
Synchro Rec 49
“Unfinalise” 39
Unfinalising 39
“Repeat Title” 56
Resume Play 53
“RGB” 80
Rotate 73
110
Download from Www.Somanuals.com. All Manuals Search And Download.
Sony Corporation Printed in Hungary
Download from Www.Somanuals.com. All Manuals Search And Download.
|