3-266-469-11(1)
Portable
MiniDisc Recorder
Operating Instructions
“WALKMAN” is a registered trademark of Sony Corporation to
represent Headphone Stereo products.
trademark of Sony Corporation.
is a
MZ-NH700
© 2004 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
• Macintosh is a trademark of Apple
Computer, Inc. in the United States and/
or other countries.
• MMX and Pentium are trademarks or
registered trademarks of Intel
Corporation.
Notice for users
On the supplied software
• Copyright laws prohibit reproducing the
software or the manual accompanying it
in whole or in part, or renting the
software without the permission of the
copyright holder.
• In no event will SONY be liable for any
financial damage, or loss of profits,
including claims made by third parties,
arising out of the use of the software
supplied with this recorder.
• In the event a problem occurs with this
software as a result of defective
manufacturing, SONY will replace it.
However, SONY bears no other
responsibility.
• The software provided with this
recorder cannot be used with equipment
other than that which is so designated.
• Please note that, due to continued efforts
to improve quality, the software
specifications may be changed without
notice.
• All other trademarks and registered
trademarks are trademarks or registered
trademarks of their respective holders.
• ™ and ® marks are omitted in this
manual.
• CD and music-related data from
Gracenote, Inc., copyright © 2000-2003
Gracenote. Gracenote CDDBR Client
Software, copyright 2000-2003
Gracenote. This product and service
may practice one or more of the
following U.S. Patents: #5,987,525;
#6,061,680; #6,154,773, #6,161,132,
#6,230,192, #6,230,207, #6,240,459,
#6,330,593 and other patents issued or
pending.
Gracenote and CDDB are registered
trademarks of Gracenote. The
Gracenote logo and logotype, the
Gracenote CDDB logo, and the
“Powered by Gracenote” logo are
trademarks of Gracenote.
• Operation of this recorder with software
other than that provided is not covered
by the warranty.
Program © 2001, 2002, 2003, 2004 Sony
Corporation
• SonicStage and SonicStage logo are
trademarks or registered trademarks of
Sony Corporation.
Documentation © 2004 Sony Corporation
• MD Simple Burner, OpenMG, “Magic
Gate”, “MagicGate Memory Stick”,
“Memory Stick”, Hi-MD, Net MD,
ATRAC, ATRAC3, ATRAC3plus and
their logos are trademarks of Sony
Corporation.
• Microsoft, Windows, Windows NT and
Windows Media are trademarks or
registered trademarks of Microsoft
Corporation in the United States and /or
other countries.
• IBM and PC/AT are registered
trademarks of International Business
Machines Corporation.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Table of contents
Recorder Operation
Before recording .........................................................................................27
Viewing various information ......................................................................28
To start/stop recording in sync with the sound source
Viewing various information ......................................................................37
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Dividing a track (Divide) ............................................................................53
Turning off the beep sound .........................................................................57
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Software Operation
Using SonicStage Help .............................................................................102
On copyright protection ............................................................................107
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
7
About available functions and supplied
manuals
This section explains the functions of this portable MiniDisc recorder and the manuals that
have been supplied with it. Please refer to the manual that applies to each use of the
recorder.
Learning more about Hi-MD
“Hi-MD” is a new MiniDisc format with advanced capabilities over the standard MD
format.
The “What you can do with the Hi-MD Walkman” flyer
This flyer explains the major features of Hi-MD Walkman and how it
differs with standard MD Walkman.
Using the recorder
You can enjoy recording from a CD player or a microphone, then enjoy listening to the
recordings that you made.
This section explains all of the recorder functions. It also gives details
on the problems you may encounter while using the recorder and how
to solve them, and about what to do when a message appears in the
display.
, When you encounter any problems or need more
explanation
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Using the recorder while it is connected to a computer
The supplied SonicStage software allows you to transfer audio data between the recorder
and the computer.
The supplied MD Simple Burner software allows you to record audio data to the recorder.
Audio CDs
Internet
Music files
This section explains the installation and basic operations of the supplied SonicStage/MD
Simple Burner software.
SonicStage Help
This is an online help that you can view on your computer
screen.
Online help explains the detailed operations and information
about SonicStage software. You can also refer to online help
if you encounter any problems while using the SonicStage.
Notes on the “Software Operation” section
• In Software Operations section, “Net MD” refers to the recorder with a standard disc inserted and “Hi-
MD” refers to the recorder with a Hi-MD disc or a standard disc in Hi-MD mode inserted.
• The displayed items in the illustrations that appear in this section may differ from the actual items
displayed by the software.
• Explanations in this section assume familiarity with basic Windows operations. For details on the use
of your computer and the operating system, please refer to the respective manuals.
• Explanations in this section cover general Hi-MD/Net MD products. For this reason, some
explanations (and some illustrations) may not be applicable to your Hi-MD/Net MD. Please refer to
the operating instructions of your Hi-MD/Net MD as well.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Checking the supplied accessories
AC power adaptor (1)
Remote control (1)
Headphones/earphones (1)
Dedicated USB cable (1)
NH-7WMAA Nickel metal
hydride rechargeable battery (1)
Optical cable (except Canada and Mexico models) (1)
CD-ROM (SonicStage/MD Simple Burner) (1)*
Battery carrying case (1)
Carrying pouch (1)
* Do not play a CD-ROM on an audio CD player.
Note
When using this unit, remember to follow the precautions below in order to avoid warping the
cabinet or causing the unit to malfunction.
• Make sure not to put the unit into a bag with
the remote control or the headphones/
earphones cord wrapped around it and then
subject the bag to strong impact.
• Make sure not to sit down with the unit
in your back pocket.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Looking at controls
The recorder
1
2
8
9
q;
3
4
qa
qs
qd
5
6
7
qf
qg
A Display window
B T MARK/REC (+N) button
C Jog dial
Operation
Function
Press towards
>
find the beginning
of the next track,
fast forward
Press towards
VOL –.
volume
1) There are tactile dots beside the NENT
and VOL + buttons.
D 5-way control key
E DC IN 3V jack
F X (pause) button
G x (stop) • CANCEL/CHG button
H OPEN switch
I GROUP button
J •NAVI/ MENU button
Operation
Press NENT 1) play, enter
Function
Press lightly to go to the NAVI
Press for 2 seconds or more to go to
Press towards
.
find the beginning
of the previous
track, rewind
K
USB cable connecting jack
Download from Www.Somanuals.com. All Manuals Search And Download.
11
L LINE IN (OPT) jack
N HOLD switch
Slide the switch in the direction of the
arrow to disable the buttons on the
recorder. To prevent the buttons from
being accidentally operated when you
carry the recorder, use this function.
M MIC (PLUG IN POWER) jack
There is a tactile dot beside the MIC
(PLUG IN POWER) jack.
O i (headphones/earphones) jack
The display window of the recorder
1
2
3
4 5
6
7
8
9
A Character information display
Displays the disc and track names,
date, error messages, track numbers,
etc.
E Battery indication
Shows the approximate remaining
battery power. If the battery is weak,
the indication becomes empty and
starts flashing.
B SYNC (synchro-recording) indication
F Disc indication
C Hi-MD/MD indication
“Hi-MD” lights up when the
operation mode of the recorder is in
Hi-MD mode and “MD” lights up
when the operation mode is in MD
mode.
Shows that the disc is rotating for
recording or playing.
G Track mode (PCM, Hi-SP, Hi-LP, SP,
LP2, LP4, MONO) indication
H Sub play mode/Repeat play
indications
D REC indication
Lights up during recording or file
transfers from the computer. When
flashing, the recorder is in record
standby mode.
Shows the selected Sub play mode
(single-track play, shuffle play, etc.) or
Repeat play.
I Main play mode indications
Shows the selected main play mode
(group play, bookmark play, etc.).
Download from Www.Somanuals.com. All Manuals Search And Download.
12
The headphones/earphones with a remote control
4
1
5
2
6
3
7
A Clip
F x (stop) button
B HOLD switch
G ., > buttons
To prevent the buttons from being
accidentally operated when you carry
the recorder, use this function.
Operation
Function
Press .
find the beginning of
the previous track,
rewind
C
(group) +, – buttons
D Volume control (VOL +, –)
Press >
find the beginning of
the next track, fast
forward
Turn to adjust the volume.
E NX (play, pause) button
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Getting started
Charge the rechargeable battery before using.
1
Insert the rechargeable battery.
1Slide OPEN to open the
2Insert the NH-7WMAA
rechargeable battery E
end first.
3Close the lid.
battery compartment lid.
e
E
2
Charging the rechargeable battery.
1Connect the AC power adaptor to DC IN
3V on the recorder and the AC power
adaptor to a wall outlet.
2Press x • CANCEL/CHG.
“Charging” flashes, e appears in the
display, and charging starts. When
charging is completed, the battery
indication disappears.
To a wall outlet
AC power
adaptor
x • CANCEL/CHG
To DC IN 3V
3After the charging has finished,
disconnect the AC power adaptor.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
z
Full charging of a completely discharged
rechargeable battery takes about 2 hours.
Charging time may vary depending on the
battery condition.
3
Make connections and unlock the controls.
1Connect the headphones/earphones
2Slide HOLD to the opposite direction of
the arrow (.) on the recorder or the
remote control to unlock the controls.
with the remote control to i.
Connect firmly
HOLD
To i
Connect firmly
continued
Download from Www.Somanuals.com. All Manuals Search And Download.
15
For models supplied with the
AC plug adaptor
If the AC power adaptor does not fit the
wall outlet, use the AC plug adaptor.
When to charge the
rechargeable battery or
replace the dry battery
You can check the battery condition on the
display window of the recorder.
When using the dry battery
Insert one LR6 (size AA) alkaline dry
battery (not supplied) instead of the
rechargeable battery.
Battery power decreasing
m
Weak battery
m
The battery is drained.
“LOW BATTERY” flashes in the
display, and the power goes off.
Notes
• Make sure not to operate the recorder while
changing the rechargeable battery even if the
recorder is connected to AC power adaptor.
The operation may stop.
The battery level indicator is approximate. It
may be more or less than the indication
depending on the operating condition or the
operating environment.
• “Charging” and e may not appear in the
display immediately after you connect the AC
power adaptor and press x • CANCEL/CHG.
The indication will, however, begin flashing
after a few minutes and charging will begin.
• Because of the battery’s characteristics, the
capacity of the rechargeable battery may be
smaller than normal when it is used for the
first time or after a long period of disuse. In
this case, charge and discharge the battery
several times. The normal battery life will be
restored.
Battery life
When recording continuously
Hi-MD mode (When using a 1GB Hi-
MD disc)
(Unit: approx.hours)(JEITA1))
Batteries
Linear Hi-SP Hi-LP
PCM
NH-7WMAA
3
4.5
5
• Charge the rechargeable battery at a
temperature of +5° C (+41° F) to +35° C
(+95° F). The charging time may vary
according to the surrounding temperature.
• It is preferable to use the recorder on house
current when recording or editing. When
powering the recorder with a battery, make
sure to use a fully charged rechargeable
battery or a new dry battery.
2)
LR63)
2.5
3.5
4.5
1) Measured in accordance with the JEITA
(Japan Electronics and Information
Technology Industries Association) standard.
2) When using a 100% fully charged nickel
metal hydride rechargeable battery
3) When using a Sony LR6 (size AA)
“STAMINA” alkaline dry battery (produced
in Japan)
Hi-MD mode (When using a 60/74/80-
minute standard disc)
(Unit: approx.hours)(JEITA)
Batteries
Linear Hi-SP Hi-LP
PCM
NH-7WMAA 2.5
4.5
8
5.5
9.5
5
LR6
Download from Www.Somanuals.com. All Manuals Search And Download.
16
MD mode
(Unit: approx.hours)(JEITA)
SP LP2 LP4
Stereo Stereo Stereo
Batteries
NH-7WMAA 4.5
7.5
6
6.5
11
9.5
LR6
When playing continuously
Hi-MD mode (When using a 1GB Hi-
MD disc)
(Unit: approx.hours)(JEITA)
Batteries
Linear Hi-SP Hi-LP
PCM
NH-7WMAA 4.5
11
7.5
9
18.5
21.5
LR6
Hi-MD mode (When using a 60/74/80-
minute standard disc)
(Unit: approx.hours)(JEITA)
Batteries
Linear Hi-SP Hi-LP
PCM
NH-7WMAA
LR6
4
7.5
17
9
9.5
20
MD mode
(Unit: approx.hours)(JEITA)
SP LP2 LP4
Stereo Stereo Stereo
Batteries
NH-7WMAA 7.5
9
10
26
20.5
24
LR6
Notes
• Stop the recorder before replacing the battery.
• When using a 1GB Hi-MD disc, the
continuous recording time may be shortened if
you repeatedly make short recordings.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Recording a disc right away!
This section explains the basic procedure for making digital recordings using
an optical cable connected to a CD player, Digital TV or other digital
equipment. Make sure to use the optical cable.
1
Make connections. (Insert the cables firmly and completely into
the appropriate jacks.)
1Connect the AC power adaptor to the
2Connect the optical cable to the
recorder and a house current.
recorder and an external component.
CD player, MD player,
DVD video player, etc.
To a wall
outlet
To a digital (optical) out jack
Optical plug
Optical mini-
plug
AC power
adaptor
Optical cable*
To LINE IN
(OPT)
To DC IN 3V
Note
Make sure to disconnect the dedicated USB cable before recording.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
2
Insert a recordable disc.
1Slide OPEN to open the lid.
2Insert a disc with the label side facing
front, and press the lid down to close.
Make sure to
check the
record-protect
tab is closed.
3
Confirm the operation mode.
This recorder has two operation modes, “Hi-MD mode” and “MD mode”. The operation
mode is automatically recognized whenever the disc is inserted. After you insert a disc,
check the operation mode on the display window of the recorder.
“ Hi-MD” lights up when the operation mode is Hi-MD and
“MD” lights up when the operation mode is MD.
• When using a 1GB Hi-MD disc, the operation mode will only be Hi-MD.
• When using a standard disc (60/74/80 minutes), the operation mode can be set as follows.
Disc condition
Operation mode
Blank disc
The mode set for “Disc Mode” in the menu.1)
The “Disc Mode” is factory set to “Hi-MD”.
If you want to use the disc on another component that
does not support Hi-MD, set the “Disc Mode” to “MD”
to use the disc in MD mode.
The disc contains material
recorded in Hi-MD mode
Hi-MD
The disc contains material
recorded in MD mode
MD
continued
Download from Www.Somanuals.com. All Manuals Search And Download.
19
4
Record a disc.
1Select and pause the sound source to
2Make sure that disc indication has
stopped rotating in the display window
on the recorder.
be recorded.
PAUSE
Make sure that disc
indication has stopped.
Connected component
3While the recorder is stopped, press
and hold T MARK/REC and press
NENT on the recorder.
4Play the source you want to record.
If you insert a previously recorded disc,
the recording starts after the existing
contents.
“REC” lights up and recording starts.
Track marks are automatically added at
the same point as the sound source, and
the contents are recorded together as a
group.
T MARK/REC
PAUSE
NENT
Connected component
To
Press
Stop
Pause
Press x.
Press X1).
Press X again to resume recording.
Remove the disc
Press x and open the lid. (The lid does not open while
“SYSTEM FILE WRITING” flashing in the display.)
1) A track mark is added at the point where you press X again to resume recording while pausing; thus
the remainder of the track will be counted as a new track.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
• Note the following when recording from a
portable CD player:
If the recording does not start
• Make sure the recorder is not locked (pages
—Some portable CD players may not be
capable of digital out when the AC power
adaptor is disconnected. If this is the case,
connect the AC power adaptor to the
portable CD player and use it on AC power
as the power source.
—On some portable CD players, optical
output may not be possible when using an
anti-skip function (e.g., ESP* or
• Make sure the disc is not record-protected
• Premastered discs cannot be recorded over.
Notes
• When you record on a 1GB Hi-MD disc,
connect the AC power adaptor to the recorder,
charge the rechargeable battery fully (battery
G-PROTECTION). If this is the case, turn
off the anti-skip function.
level indication shows
alkaline dry battery (battery level indication
shows ). When you attempt to start
), or use a new
∗ Electronic Shock Protection
recording on a 1GB Hi-MD disc,
z
“NotENOUGH POWER TO REC” may
appear and recording cannot be done even if
the battery level indication shows sufficient
remaining power while the recorder is stopped
or playing. This is because of a mechanism
that disables recording when the remaining
battery power is estimated by the recorder to
be insufficient due to the high power
• The recorder is factory set to make a new
group whenever recording is done. If you do
not want to make a group, set “
:REC” to
“
• To start recording from a specific point on the
disc, pause the recorder at the desired point,
and then start recording from that point.
• You can monitor the sound during recording.
Connect the headphones/earphones with
remote control to i and adjust the volume by
pressing the 5-way control key towards VOL
+ or – on the recorder (turning the volume
control on the remote control). This does not
affect the recording level.
consumption required for 1GB Hi-MD disc
recording.
• Make sure to place the recorder at a stable,
vibration-free place during recording.
• If you start recording when the disc indication
is still rotating in the display, the first few
seconds of the material may not be recorded.
Make sure that the disc indication has stopped
rotating before you start recording.
• Do not change the rechargeable battery during
operation even if the recorder is connected to
AC power adaptor. The operation may stop.
• Do not move or jog the recorder or disconnect
the power source while recording or
“SYSTEM FILE WRITING” is flashing in the
display. If you do, the data recorded up to that
point may not be recorded to the disc, or data
on the disc may be damaged. “SYSTEM FILE
WRITING” flashes while data of the
recording (the track’s start and end points,
etc.) is being recorded.
• Recording cannot be done when the disc does
not have enough space for recording.
• If the power supply is disrupted (i.e. the
battery is removed or becomes exhausted or
the AC power adaptor is disconnected) during
a recording or editing operation, or while
“SYSTEM FILE WRITING” appears in the
display, then it will not be possible to open the
lid until power is restored.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Playing a disc right away!
1
Insert a recorded disc.
1Slide OPEN to open the lid.
2Insert a disc with the label side facing
front, and press the lid down to close.
2
Play a disc.
1Press the 5-way control key (NENT)
2Press the 5-way control key towards
VOL + or – to adjust the volume on the
recorder.
on the recorder.
Press NX on the remote control.
A short beep sounds in the headphones/
earphones when you operate.
Turn the volume control towards VOL +
or – on the remote control.
The volume will be shown in the
display.
5-way control key
(NENT, ., >,
Jog dial
Volume
control
VOL +, –)
GROUP
NX
x
+, –
., >
To stop play, press x.
x
X
A long beep sounds in the headphones/earphones when you operate. Playback starts from the point
you last stopped playing. After you stop the recorder, the recorder will automatically turn off in about
10 seconds (when using batteries) or about 3 minutes (when using an AC power adaptor).
Download from Www.Somanuals.com. All Manuals Search And Download.
22
To
Operation on the recorder
Operation on the remote
control
Stop
Press x.
Press x.
Pause
Press X. Press X again to resume Press NX.
play.
Press NX again to resume
play.
Select a track directly
Turn the jog dial to select a track,
—
viewing track number or and then press NENT to enter.
name
Find the beginning of
the current track
Press the 5-way control key
towards .. Press the 5-way
control key towards .
repeatedly until you reach the
beginning of the desired track.
Press .. Press .
repeatedly until you reach the
beginning of the desired track.
Find the beginning of
the next track
Press the 5-way control key
towards >.
Press >.
Go backwards or
forward while playing
Press and hold the 5-way control
key towards . or >.
Press and hold . or >.
Search for a point in a
While pausing, press and hold the While pausing, press and hold
track while viewing the 5-way control key towards . or . or >.
elapsed time (Time
search)
>.
Search for a specific
track while viewing
track numbers (Index
search)
While the recorder is stopped, press While the recorder is stopped,
and hold the 5-way control key
press and hold . or >.
towards . or >.
Cue to the next or
Press GROUP, and then press the
5-way control key towards . or
>.
Press
+ or – button.
previous group while
playing a track in a
group (Group skip)1)
While the recorder is stopped, press
NENT for 2 seconds or more.
Start with the first track
of the disc
While the recorder is stopped,
press NX for 2 seconds or
more.
Remove the disc
Press x and open the lid.2)
1) Cues to the beginning of every 10th track during playback of the disc with no group settings.
2) Once you open the lid, the point to start play will change to the beginning of the first track.
If the play does not start
Note
The playback sound may skip if:
15).
• the recorder is subject to strong, repeated
shocks.
• a dirty or scratched disc is played.
When using a disc in Hi-MD mode, sound may
drop out for a maximum of about 12 seconds.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Using menus
How to use the menu items
The recorder has many menus with useful functions for recording, playback, editing, etc.
To set the menu items, do the following procedure.
If you are doing a menu operation for the first time after purchasing the recorder, “Menu
Mode” flashes in the display. Before the menu operation, you can set “Menu Mode” to
“Simple” (only basic menu items appear) or “Advanced” (all menu items appear). Refer to
“Changing the displayed menu items (Menu Mode)” (page 56) for menu mode setting.
NAVI/MENU
5-way control
key (NENT)
Jog dial
x
1 Press and hold NAVI/MENU for 2 seconds or more to enter the menu.
2 Turn the jog dial to select the item.
3 Press the 5-way control key (NENT) to enter the selection.
The setting will be entered when you press the 5-way control key (NENT) at the last.
To return the preceding setting
Press x.
To cancel the operation while setting
Press x for 2 seconds or more.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
List of menus
The following table shows the menu items that you can select. Menu items can be set with
the recorder only.
Items listed under “Menu 1” are the selectable items which appear when you enter the
menu, and items listed under “Menu 2” are the selectable items which appear when you
select an item in Menu 1.
It is possible to display all menu items only when “Menu Mode” is set to “Advanced”.
Menu items with an asterisk (*) are not displayed when “Menu Mode” is set to “Simple”.
Note
Different indication may be displayed depending on the operating conditions and disc settings.
Menu 1
Menu 2
Title*
Function
Site
page
Edit
group name, or disc name.
: Set*
Assigns recorded tracks or groups to a new
group.
: Release*
Releases group settings.
Move*
Erase
Changes the order of tracks or groups.
Erases tracks, groups, or the entire disc
contents.
Format*
it was in at the time of purchase (in Hi-MD
mode only).
Display
Lap Time
Displays various information such as the
recorder status, etc. in the display window.
RecRemain (while
recording and
stopped)/
1 Remain (while
playing)
AllRemain
Title1/Title2
Sound*
Codec/
TrackMode*
SubPMode
Normal
Selects the type of play, such as single-track
play or shuffle play.
1 Track
Shuffle
A-BRepeat*
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Menu 1
Menu 2
Function
Site
page
Sound
Normal
Customizes the equalizer mode settings.
Sound EQ
Search*
Useful*
REC Set
artist name, or album name.
REC Mode
Selects the recording mode (PCM, Hi-SP, or
Hi-LP for Hi-MD mode/SP, LP2, LP4, or
monaural for MD mode).
RECVolume*
MIC AGC*
Manually adjusts the recording level.
Sets the microphone recording level
adjustment mode.
MIC Sens*
Time Mark*
:REC*
Sets the microphone sensitivity to suit the
source sound.
Adds track marks automatically in a specific
time interval.
Sets the recorder to create a new group with
each recording operation (Group Recording).
SYNC REC*
(Synchro-Recording).
Option
Menu Mode
AVLS*
Changes the displayed menu items.
your hearing.
Beep*
Turns the beep sound on or off.
Disc Mem*
QuickMode*
Disc Mode
Stores the recorder settings (Disc Memory).
Sets the recorder to start playback quickly.
a blank disc is inserted.
Contrast*
Jog Dial*
the recorder.
Changes the operational direction on the
display when turning the jog dial.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
Various ways of recording
Notes
Before recording
• When you record on a 1GB Hi-MD disc,
connect the AC power adaptor to the recorder,
charge the rechargeable battery fully (battery
Selecting the operation mode
This recorder has two operation modes,
“Hi-MD mode” and “MD mode”. The
operation mode is automatically
recognized whenever the disc is inserted.
After you insert a disc, check the
operation mode on the display window of
the recorder.
level indication shows
alkaline dry battery (battery level indication
shows ). When you attempt to start
), or use a new
recording on a 1GB Hi-MD disc,
“NotENOUGH POWER TO REC” may
appear and recording cannot be done even if
the battery level indication shows sufficient
remaining power while the recorder is stopped
or playing. This is because of a mechanism
that disables recording when the remaining
battery power is estimated by the recorder to
be insufficient due to the high power
consumption required for 1GB Hi-MD disc
recording.
“Hi-MD” lights up when the operation
mode is Hi-MD and “ MD” lights up when
the operation mode is MD.
• Recording may not occur if the dedicated
USB cable is connected to the recorder. Make
sure to disconnect the dedicated USB cable
before recording.
• If you start recording when the disc indication
is still rotating in the display, the first few
seconds of the material will not be recorded.
Make sure that the disc indication has stopped
rotating before you start recording.
When you insert a standard disc (blank)
into the recorder, you can use the Disc
Mode function to specify use of the disc
in Hi-MD mode or MD mode.
If you want to use the disc recorded on
this unit on another component that does
not support Hi-MD, record the disc with
“Disc Mode” in the menu set to “MD”.
Refer to “Selecting the disc mode (Disc
Mode)” (page 58) for details.
• Do not move or jog the recorder or disconnect
the power source while recording or
“SYSTEM FILE WRITING” is flashing in the
display. If you do, the data recorded up to that
point may not be recorded to the disc, or data
on the disc may be damaged. “SYSTEM FILE
WRITING” flashes while data of the
recording (the track’s start and end points,
etc.) is being recorded.
Selecting the Menu Mode
If the “Simple” menu mode is selected,
some menu items will not be displayed. If
you cannot find certain menu items while
operating the recorder, make sure that the
menu mode is set to “Advanced”.
For details on selecting the menu mode,
Download from Www.Somanuals.com. All Manuals Search And Download.
27
While the recorder is stopped A/B/
C
Viewing various
information
A
B
C
Group
Elapsed time • Track name
You can check the remaining time, track
number, etc. when recording or during
stop.
number
and track
number
and artist
name (Hi-
MD)
• Track
name(MD)
Jog dial
NAVI/
MENU
Group
• Remaining • “RecRemain”
number
and track
number
time for
recording /
remaining
free space
(Hi-MD)
• Remaining
time for
and
“FreeSpace”
(Hi-MD)
• “RecRemain”
(MD)
5-way control key
(NENT)
recording
(MD)
1 Enter the menu and select “Display”.
Numbers
of tracks
after the
current
track
Remaining
time after the
current
location in
the disc.
“AllRemain”
Track name
2 Turn the jog dial until the information
you want appears in the display, and
then press NENT to enter the
selection.
Each turn changes the display as
follows.
• Disc
name and
artist
• Group
name and
album name
(Hi-MD)2)
• Group
name
Lap Time t RecRemain t
AllRemain t Title1/Title2 (Hi-MD)
t Sound
When you press NENT, the selected
information appears at A, B and C.
name (Hi-
MD)1)
• Disc
name1)
(MD)2)
Sound
mode
name
Indication of (none)
the selected
sound mode
Display window
1) Track number appears if the currently selected
track is not in a group.
2) The disc name appears when the currently
selected track is not in a group.
The indications have the following
meanings:
: Disc name
: Track name
: Group name
: Artist name
: Album name
Download from Www.Somanuals.com. All Manuals Search And Download.
28
While recording A/B/C
Recording from a
microphone
A
B
C
Group
number and
track
Elapsed time Level meter
Stereo
microphone*
number
Group
number and time for
track
number
Remaining
“RecRemain”
Track name
recording.
NAVI/MENU
• Disc name • Group
T MARK/REC
and artist
name (Hi-
MD)1)
name and
album
name (Hi-
MD)2)
• Disc name
(MD
)
• Group
name
(MD)2)
5-way control
key (NENT)
To MIC (PLUG
IN POWER)
Jog dial
1) Track number appears if the currently selected
track is not in a group.
2) The disc name appears when the currently
selected track is not in a group.
Notes
1 Connect the stereo microphone to the
2 PMreICss(NPLUEGNTINwPhiOleWpEreRs)sijnagck.
• When using the disc in Hi-MD mode, the free
space will show as “2.0MB” when the
remaining recording time becomes
“–0:00:00”. This is a system limitation,
“2.0MB” being the capacity of the reserve
domain.
• Depending on the group settings, the
operating conditions, and the disc settings,
you may not be able to select certain
indications or the indications may appear
differently.
T MARK/REC to start recording.
To select microphone
sensitivity
You can select the microphone sensitivity
depending on the volume of the sound
source.
z
If you want to check the playing position or
track name while playing, see “Viewing various
1 While the recorder is recording or
stopped, enter the menu and select
“REC Set” - “MIC Sens”.
continued
Download from Www.Somanuals.com. All Manuals Search And Download.
29
2 Turn the jog dial until “Sens High” or
“Sens Low” appears in the display,
and then press NENT to enter the
selection.
Notes
• The recorder automatically switches input in
the following order; optical input, microphone
input, and analog input. You cannot record
through the microphone while an optical cable
is connected to the LINE IN (OPT) jack.
• You cannot set the “MIC AGC” setting if you
are recording with the recording level
• The microphone may pick up the operating
sound of the recorder itself. Use the
microphone away from the recorder in such
cases. Please note that the sound of recorder
operations may be picked up if the
Sens High: When recording a soft
sound or a sound with a normal
volume.
Sens Low: When recording with a
loud or close-range sounds, such as
those during an oral recording or a
music concert.
To change the microphone
recording level adjustment
mode
microphone that you use has a short
connector.
• Only the left-channel sound is recorded when
a monaural microphone is used.
When recording with a microphone, you
can select automatic adjustment mode
which sets the microphone recording level
to suit the sound source.
• Make sure not to touch the plug or the cord of
the microphone when recording with the AC
power adaptor connected. Doing so may
introduce noise into the recording.
• When recording a normal volume sound (soft
music, etc.), set “MIC AGC” to “Standard”. If
an unexpectedly high-volume sound input
when “MIC AGC” is set to “LoudMusic”, the
recorded volume thereafter may drop very
low, depending on the sound source.
1 While the recorder is recording or
stopped, enter the menu and select
2 “TRurEnCthSeejto”g- d“MialICunAtilG“CS”ta. ndard” or
“LoudMusic” appears in the display,
and then press NENT to enter the
selection.
Standard: When recording a sound
source with a normal volume, such as
a conversation or soft music.
LoudMusic: When recording a sound
source with a comparatively high
volume, such as a music concert or a
practice session with a musical
instrument.
z
• When “MIC AGC” is set to “LoudMusic”,
sound can be recorded with less distortion
during high volume input, and with natural
volume transitions similar to those of the
original.
• When using a plug-in power-type
microphone, the microphone can be operated
even when its power switch is turned off since
power is supplied from the recorder itself.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
Recording from a TV or
radio (Analog
Selecting the recording
mode
Recording)
Select each recording mode according to
the recording time that you want.
Discs recorded in Hi-MD or MD
(MDLP) mode can be played back
only on MD players or recorders
with Hi-MD or MD (MDLP) playback
mode.
This section explains how to record from
equipment with analog output, such as a
cassette recorder, radio, or TV.
This operation can be done on the
recorder only.
TV, cassette
recorder, etc.
Jog dial
NAVI/
MENU
To LINE OUT jacks, etc.
R
(red)
L
5-way control
key (NENT)
(white)
Line cable
RK-G129,
RK-G136, etc.
1 While the recorder is stopped, enter
the menu and select “REC Set” -
2 “TRurEnCthMe ojodge”d.ial to select the desired
recording mode, and then press
NENT to enter the selection.
T MARK/
REC
The recorder keeps the setting of the
recording mode when you record the
next time.
When recording on a disc used in Hi-
MD mode
To LINE IN (OPT)
5-way
Recording Display Recording
control key
time
mode
(NENT)
LinearPCM PCM
stereo
• Approx. 28
min. on an 80-
minute
standard disc
• Approx. 94
min. on a 1GB
Hi-MD disc
1 Make connections.
Use the appropriate connecting cord
to suit the source equipment. For
details, see “Optional accessories”
T MARK/REC to start recording.
3 Play the source you want to record.
continued
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Recording Display Recording
mode
Notes
time
• It is recommended that you use the AC power
adaptor for long recordings.
Hi-SP
stereo
Hi-SP
• Approx. 140
min. on an 80-
minute
standard disc
• Approx. 475
min. on a 1GB
Hi-MD disc
• When you record in LP4 mode, momentary
noise may be produced on very rare occasions
with certain sound sources. This is because of
the special digital audio compression
technology that enables the long time
recording. If noise is produced, it is
recommended that you record in normal
stereo or LP2 mode to obtain better sound
quality.
• It is recommended that you use the recorder to
edit (dividing or combining) long tracks
recorded in linear PCM stereo. Transferring
such tracks and editing them on a computer
may require an extremely long time.
Hi-LP
stereo
Hi-LP
• Approx. 610
min. on an 80-
minute
standard disc
• Approx. 2,040
min. on a 1GB
Hi-MD disc
When recording a disc used in MD
mode
Recording Display
mode1)
Recording
time3)
Adjusting the recording
level manually
The recording level is adjusted
automatically while recording. If
necessary, you can set the recording level
manually during both analog and digital
recording.
SP stereo
SP
Approx. 80
min.
LP2 stereo
LP4 stereo
Monaural2)
LP2
Approx. 160
min.
LP4
Approx. 320
min.
T MARK/REC
Jog dial
MONO
Approx. 160
min.
NAVI/
MENU
1) For better sound quality, record in normal
stereo (SP) or LP2 stereo mode.
2) If you record a stereo source in monaural, the
sounds from left and right will be mixed.
3) When using an 80-minute recordable disc
5-waycontrol key
(NENT)
X
z
Audio components that support the linear PCM
stereo, Hi-SP stereo and Hi-LP stereo mode are
indicated by the
Audio components that support the LP2 stereo
and LP4 stereo mode are indicated by the
or
logo mark.
1 Press NENT, while pressing
T MARK/REC and X.
2 TEhneterretchoerdmeernsutaanndds sbeylefcotr“rRecEoCrdSinegt”.
or
logo mark.
3 -Pl“aRyEthCeVsooluumrcee”. - “Manual”.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
4 While observing the level meter in the
display, adjust the recording level by
turning the jog dial.
Adding track marks
while recording
You can add track marks (track number)
while recording to divide the material into
separate parts, that allow you to go to
specific track quickly and easily.
Set the level so that the meter
segments light up around –12dB
segment.
If a high sound level causes the level
meter to reach the OVER segment,
lower the recording level.
Jog dial
T MARK/REC
Each level meter shows the following.
Upper — L channel input level
Lower — R channel input level
NAVI/
MENU
5-way control
key (NENT)
–12dB
OVER
Adding track marks manually
5 Press X again to start recording.
While the recorder is recording, press
T MARK at the point you want to add a
track mark.
If your source is an externally
connected component, play the
source to the beginning of the
material to be recorded, and then start
recording.
Adding track marks
automatically (Auto Time
Mark)
To switch back to automatic
level control
Use this feature to add track marks
automatically at specified intervals when
recording through the analog input
Notes
connector or a microphone. This function
is convenient for recording long period of
time, such as lectures, meetings, etc.
• You cannot adjust the left and right channel
levels separately.
• Once you stop recording, the recorder will
revert to automatic recording level adjustment
mode the next time you start a recording
operation.
• To adjust the recording level manually during
procedure in this section with “SYNC REC”
is set to “SYNC Off”. Afterwards, set “SYNC
REC” setting to “SYNC On”, and start
1 While the recorder is recording or in
recording pause, enter the menu and
select “REC Set” - “Time Mark” -
2 “TOurnn”.the jog dial until the desired
time interval appears in the display,
and then press NENT to enter the
selection.
One rotation changes the time setting
(Time:) by 1 minute, within the range
of 1 to 60 minutes.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
To cancel Time Mark
Select “Off” in step 1.
Using the group
function when
recording
Using Time Mark to add track
marks while recording
What is the group function?
When the elapsed recording time
exceeds the time interval for Time
Mark:
The recorder adds track marks at the point
you set the time interval and from that
point the recorder adds a track mark
whenever the time interval has elapsed.
The group function is provided to allow
playback of discs with group settings. The
group function is convenient for playback
of discs on which several albums or CD
singles have been recorded.
What is a disc with group
settings?
The recorder can operate various
functions in units of group; that is tracks
that have been recorded on a disc as part
of separate groups, as shown below.
Example: Eight minutes of recording
has been completed when the Time Mark
time interval is set to 5 minutes.
A track mark will be added at the 8-
minute point (after the start of recording)
and after each 5-minute interval
thereafter.
Before group settings are made
Disc
When the time interval set for Time
Mark exceeds the elapsed recording
time:
The recorder adds track marks when the
set Time Mark time interval has elapsed.
Group 1
Group 2
Group 3
1 2 3 4 5 6 7 8 12 13 1415
Track 1 to 5 are assigned to group 1.
Track 8 to12 are assigned to group 2.
mTrack 13 to15 are assigned to group 3.
Track 6 to 7 are assigned to no group.
Example: Three minutes of recording
has been completed when the Time Mark
time interval is set to 5 minutes.
A track mark will be added at the 5-
minute point (after the start of recording)
and after each 5-minute interval
thereafter.
After group assignments have been made
Disc
Group 1
Group 2
Group 3
z
“T” appears before the time display for track
marks added by Time Mark.
1 2345 6 7 1 2345 1 23
Tracks that were not assigned to a group are
treated as being part of “ Group - -”.
Notes
• If you add a track mark by pressing T MARK
or X, etc. while recording, Time Mark will
begin automatically adding track mark each
time the selected time interval as elapsed.
• The setting is canceled when you connect a
digital optical cable to the recorder.
You can create a maximum of 255 groups
on a Hi-MD disc or a standard disc in Hi-
MD mode and 99 groups on a standard
disc in MD mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
34
Note
Recording tracks to an
existing group
It will not be possible to make a group setting if
the tracks, groups and disc name on a disc
exceed the maximum number that can be input
(in MD mode only).
You can add a track to an existing group.
Adding a new track at the end
of the selected group
Jog dial
T MARK/REC
NAVI/
MENU
1 While the recorder is stopped and the
group to which you want to add a
track is selected, press NENT while
pressing T MARK/REC and GROUP.
GROUP
X
5-waycontrol key
(NENT)
2 Play the sound source.
A new track will be added at the end
of the current contents within the
group.
To create a new group
automatically when
recording
Adding a track at a desired
position within the selected
group
The recorder is factory set to create a new
group automatically when recording. This
is convenient when recording several CDs
in succession. You can check the group
recording setting as follows.
1 While the recorder is play-paused at
the point within the group where you
want to add a new track, press
NENT while pressing T MARK/
2 RPrEeCssaXndtoGsRtaOrUt rPe.cording and play
While the recorder is stopped, enter the
menu and select “REC Set” - “ :REC” -
the sound source.
“
: REC On”.
To record without creating a
new group
Select “ :REC Off” at the end of the
procedure above.
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Notes
To start/stop recording
in sync with the sound
source
• The pause function cannot be turned on or off
manually during synchro-recording.
• Do not switch the “SYNC REC” setting while
recording. Recording may not be done
properly.
(Synchro-recording)
During synchro-recording, the starting
and stopping of recording occurs are
synchronized with the sound source. This
simplifies digital recordings (e.g., from a
CD player) since the need to operate the
recorder or the sound source is
• Even when there is no sound on the sound
source, there may be cases when recording
does not pause automatically during synchro-
recording due to the noise level emitted from
the sound source.
• If a silent portion is encountered for
approximately 2 seconds during synchro-
recording from a sound source other than a
CD or an MD, a new track mark is
automatically added at the point where the
silent portion ends.
eliminated. Synchro-recording is only
possible with the optical cable connected.
Jog dial
NAVI/
MENU
5-waycontrol key
(NENT)
1 Make connections.
Use the appropriate optical cable to
suit the source equipment. For details,
the menu and select “REC Set” -
“SYNC REC” - “SYNC On”.
z
When there is no sound from the player for
about 3 seconds during synchro-recording, the
recorder goes into the standby mode
automatically. When the sound comes from the
player again, the recorder resumes synchro-
recording. If the recorder is kept in the standby
mode for 5 minutes or longer, the recorder stops
automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
36
Various ways of playback
Display window A/B/C
Viewing various
information
You can check the track name, disc name,
etc. during playback.
A
B
C
Group
Elapsed time • Track name
number
and track
number
and artist
name (Hi-
MD)
• Track name
(MD)
Jog dial
NAVI/
MENU
•
Track
Remaining
“1 Remain”
name and time of the
artist
current track
name (Hi-
MD)
• Track
name
(MD)
5-way control key
(NENT)
Numbers
of tracks
after the
current
track
Remaining
time after
the current
location in
the disc.
“AllRemain”
Track name
1 While playing, enter the menu and
2 sTeulrenctth“eDjiosgpldaiya”l until the information
you want appears in the display, and
then press NENT to enter the
selection.
• Disc
name and
artist
• Group
name and
album
Each turn changes the display as
follows.
Lap Time t 1 Remain t
AllRemain t Title1/Title2 (Hi-MD)
t Sound t Codec (Hi-MD)/
TrackMode (MD)
name (Hi- name (Hi-
MD)1)
• Disc
MD)2)
• Group
name
name
(MD)1)
(MD)2)
Sound
mode
name
Indication of (none)
the selected
sound mode
When you press NENT, the selected
information appears at A, B and C.
• Codec
(Hi-MD)
• (none)
(MD)
• Track
mode, and
bitrate (Hi- • “TrackMode”
MD)
• Track
mode
• “Codec” (Hi-
MD)
Display window
(MD)
(MD)
The indications have the following
meanings:
: Disc name
1) Track number appears if the currently selected
track is not in a group.
2) The disc name appears when the currently
selected track is not in a group.
: Track name
: Group name
: Artist name
: Album name
Download from Www.Somanuals.com. All Manuals Search And Download.
37
Note
Playing tracks in Main play
mode
Depending on the group settings, the operating
conditions, and the disc settings, you may not
be able to select certain indications or the
indications may appear differently.
1 While playing, press NAVI/MENU.
The recorder enters navigation mode
and the Main play mode display
z
If you want to check the remaining time or the
recording position while recording or in stop
mode, see “Viewing various information”
2 aTpuprneatrhse. jog dial to select the desired
play mode, and then press NENT to
enter the selection.
Each time you turn the jog dial, A
changes as follows. When you press
NENT, B appears in the display.
Selecting the play
mode
You can listen to tracks in various play
modes. The play mode can consist of a
combination of Main play mode, Sub play
mode and Repeat play.
• Main play mode: selects the playback
unit, such as tracks or groups
• Sub play mode: selects the type of play
• Repeat play: selects Repeat play
Indication
A/B
Play mode
Normal/
(none)
Normal play (All tracks
after the selected track are
played once.)
Jog dial
NAVI/
MENU
Group/
Group play (Tracks in the
selected group are played.)
1)
Artist/
Artist play (Tracks of a
specified artist are played.)
Album/
Album play (Tracks in a
specified album are
played.)
GROUP
5-way control key
(NENT, ., >)
Bookmark/
Bookmark play
(Bookmarked tracks are
played.)
1) Appears only for discs used in Hi-MD mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
38
z
Playing tracks in normal mode
(Normal Play)
You can cue to the start of a group. While
playing, press GROUP on the recorder, and
press the 5-way control key towards . or
> to select a desired group. (Press
+ or –
on the remote control.)
Listening to tracks by a
specific artist (Artist Play) (in
Hi-MD mode only)
If the track data includes the artist name,
you can listen to tracks by a specific artist
only.
skip this step.
When selecting a track within a
group, turn the jog dial until the group
that the desired track belongs to
appears in the display, and then press
NENT to enter.
A list of the tracks in the selected
3 gTruorunpthaeppjoegardsiianl uthnetidl itshpeladye.sired
track appears in the display, and then
press NENT to enter the selection.
A list of the artists on the disc appears
2 iTnuarnlpthhaebjeotgicadliaolrudnert.il the desired
artist name appears in the display, and
then press NENT to enter.
The selected track starts playing. The
recorder plays from the selected track
to the last track in the disc,
A list of the tracks of the selected
artist appears in recorded order.
Playing tracks in a group
(Group Play)
3 Turn the jog dial until the desired
track appears in the display, and then
press NENT to enter the selection.
2 TAulrinstthoef tjhoeggdrioaul pusntoilntahedidsecsairpepdears.
group appears in the display, and then
press NENT to enter.
The name of the artist of the current
track appears in the display. The
recorder plays the tracks by the same
artist on the disc, from the current
track to the last track.
z
A list of the tracks in the selected
group appears.
You can cue to the first track of the next or
previous artist. While playing, press GROUP
on the recorder, and press the 5-way control key
3 Turn the jog dial until the desired
track appears in the display, and then
press NENT to enter the selection.
towards . or >. (Press
+ or – on the
remote control.)
The name of the group to which
current track belongs appears in the
display. The recorder plays the tracks
in that group, from the current track
to the last track.
Download from Www.Somanuals.com. All Manuals Search And Download.
39
Listening to tracks of a
selected album (Album Play)
(in Hi-MD mode only)
If the track data includes the album name,
you can listen to tracks of a selected
album only.
Listening to selected tracks
only (Bookmark Play)
You can bookmark tracks on a disc and
play them only. The sequence of
bookmarked tracks cannot be changed.
To bookmark the tracks
1 While playing the track you want to
bookmark, press NENT for 2
seconds or more.
A list of the albums on the disc
2 aTpuprneatrhseinjoaglpdhiaalbuentitcial lthoerddeers.ired
album name appears in the display,
and then press NENT to enter.
A list of the tracks in the selected
album appears in recorded order.
Bookmark flashes.
The first track of the bookmark play
is set.
3 Turn the jog dial until the desired
track appears in the display, and then
press NENT to enter the selection.
tracks.
The name of the album to which the
current track belongs appears in the
display. The recorder plays the tracks
in that album, from the current track
to the last track.
To play the bookmarked tracks
then press NENT to enter the
selection.
z
You can cue to the first track of the next or
previous album. While playing, press GROUP
on the recorder, and press the 5-way control key
towards . or >. (Press
remote control.)
+ or – on the
The recorder plays the bookmarked
tracks in the order of their track
numbers.
To erase bookmarks
While playing the track for which you
want to erase the bookmark, press
NENT for 2 seconds or more.
Download from Www.Somanuals.com. All Manuals Search And Download.
40
3 Turn the jog dial until “RepeatOn”
(playing a track repeatedly) or
“RepeatOff” appears in the display,
and then press NENT to enter the
selection (except when selecting A-B
Repeat play).
Playing tracks in Sub play
mode/Repeat Play
By specifying Sub play modes, you can
listen to tracks selected in Main play
mode in various ways.
For example, by selecting “Group” in
Main play mode and “Shuffle” in Sub
play mode, the recorder will play the
tracks in the selected group in random
order.
Listening to a section of a
track repeatedly (A-B Repeat)
You can listen to a specific section within
a track repeatedly by selecting the starting
point A, and ending point B. Make sure
that points A and B are within the same
track.
1 Enter the menu and select
2 “TSuurnbPthMeojodge”d.ial to select the desired
play mode, and then press NENT to
enter the selection.
1 While playing a track that contains
the section you want to repeat, enter
the menu and select “SubPMode” -
“A-BRepeat”.
Each time you turn the jog dial, A
changes as follows. When you press
NENT, B appears in the display.
2 “PAre-s”sfNlashEeNsTinatthtehedisstpalratyin.g point
(A).
Point A is entered and “B” flashes in
the display.
1
3 Press NENT at the ending point (B).
Point B is entered, “A-B” and “
lights up, and the section between
point A and B starts playing
repeatedly.
”
Indication
A/B
Play mode
Normal/(none) Normal play (All tracks
are played once.)
z
You can reset points A and B by pressing the 5-
way control key towards > during A-B
Repeat play.
1 Track/1
Single-track play (A
single track is played.)
Shuffle/SHUF Shuffle play (All tracks
in the selected Main
Note
Play Mode are played in
random order.)
If the recorder comes to the end of the last track
on the disc while you are selecting point A, the
setting is canceled.
A-BRepeat/
A- (A-B
A-B Repeat play (Tracks
between the selected
points A and B are
1)
)
played repeatedly.)
1) “A-BRepeat ” does not appear when the
“Menu Mode” is set to “Simple”.
Download from Www.Somanuals.com. All Manuals Search And Download.
41
4 Turn the jog dial to select the desired
track, and then press NENT to enter
the selection.
Searching for a track
(Search)
You can easily search for a track by track
name, group name, artist name, or album
name. Artist names and album names can
be viewed in the case of discs used in Hi-
MD mode only.
The selected track starts playing.
Notes
mode will be canceled (Repeat play will
function).
• During a search, unlabeled tracks will appear
at the end of each list.
Jog dial
• While the recorder is sorting the selected
items, “SORTING” appears in the display.
Wait until this indication disappears from the
display before doing any operation.
NAVI/
MENU
x
5-way control key
Selecting the sound
quality (6-Band
Equalizer)
6-BAND EQUALIZER provides 6
different sound qualities. You can vary the
virtual sound to create different acoustics,
or modify the sound to suit your taste and
store it for later use.
(NENT)
1 Enter the menu and select “Useful” -
2 T“Suernartchhe”.jog dial to select the item
you want to use for searching, and
then press NENT to enter.
Display
To
Jog dial
by Track
search by track name
search by group name
search by artist name
search by album name
NAVI/
MENU
by Group
by Artist1)
by Album1)
1) Appears only for discs used in Hi-MD mode.
5-way control key
(NENT, .,
>)
skip this step.
If you select an item other than “by
select the desired group, artist, or
album, and then press NENT to
enter.
1 While playing, enter the menu and
select “Sound” - “Sound EQ”.
A list of tracks for the selected group,
artist, or album appears in the display.
Download from Www.Somanuals.com. All Manuals Search And Download.
42
2 Turn the jog dial repeatedly to select
the sound mode and then press
To modify and store the sound
You can modify the sound and store the
results in “Custom1” and “Custom2”.
NENT to enter the selection.
A
1 While playing, enter the menu and
select “Sound” - “Sound EQ” -
2 “PCreussstothme15”-woray“Ccuosnttormol2k”e.y towards
. or > to select the frequency.
Level of the each frequency
(100 Hz - 10 kHz)
B
Frequency (100 Hz)
From the left, you can select 100 Hz,
250 Hz, 630 Hz, 1.6 kHz, 4 kHz, 10 kHz
Each time you turn the jog dial, A
changes as follows. When you press
NENT, B appears.
3 Turn the jog dial to adjust the level.
A
B
SH
SP
SJ
Heavy
Pops
Jazz
Level (+10 dB)
You can select from among seven levels.
–10 dB, –6 dB, –3 dB, 0 dB, +3 dB, +6 dB,
+10 dB
Unique
Custom1
Custom2
SU
S1
S2
4 After selecting the level, press
NENT to enter the selection.
To cancel the setting
Note
6-Band Equalizer will not function during
recording.
Download from Www.Somanuals.com. All Manuals Search And Download.
43
Editing recorded tracks
Before editing
Adding titles (Title)
You can edit your recordings by adding/
erasing track marks or labeling tracks and
discs.
You can add titles to tracks, groups and
discs. You can add artist names and album
names to tracks on a disc used in Hi-MD
mode.
Notes
Available characters
• When you edit the contents of a 1GB Hi-MD
disc, connect the AC power adaptor to the
recorder, charge the rechargeable battery fully
(battery level indication shows
new alkaline dry battery (battery level
• Capital and small letters of the alphabet
for English and European languages1)
• Numbers 0 to 9
), or use a
indication shows
). When you attempt to
1) European alphabets appear only for discs used
in Hi-MD mode.
edit on a 1GB Hi-MD disc, “NotENOUGH
POWER TO EDIT” may appear and editing
cannot be done even if the battery level
indication shows sufficient remaining power
while the recorder is stopped or playing. This
is because of a mechanism that disables
editing when the remaining battery power is
estimated by the recorder to be insufficient
due to the high power consumption required
for 1GB Hi-MD disc editing.
• Premastered discs cannot be edited.
• Close the record-protect tab on the side of the
disc before editing.
• Do not move or jog the recorder or disconnect
the power source while editing or “SYSTEM
FILE WRITING” is flashing in the display. If
you do, the data edited up to that point may
not be recorded to the disc, or data on the disc
may be damaged. “SYSTEM FILE
2) The available symbols will differ for Hi-MD
mode and MD mode (see “About the character
Maximum number of
characters per name
Track names, group names, and disc
name: Approx. 200 each (containing a
mixture of all available characters)
Maximum number of
characters that can be input
per disc
In Hi-MD mode:
A maximum of about 55,000 characters
In MD mode:
WRITING” flashes while the editing results
are being recorded.
A maximum of about 1,700 characters
• While “SYSTEM FILE WRITING” is
flashing, the lid becomes locked.
The number of titles that can be stored on
a disc depends on the number of
characters that are input for track names,
group names, artist names, album names
and disc name.
Download from Www.Somanuals.com. All Manuals Search And Download.
44
About the character palette
Note
During operations on the recorder,
characters can be selected from the
character palette in the display.
The character palette has the following
configuration.
If you enter the symbol “//” between the
characters in disc names such as “abc//def”, you
may be unable to use the group function (in MD
mode only).
5-way control key
(NENT, .,
>, VOL +, –)
Characterpalette
for Hi-MD mode
Characterpalette
for MD mode
Jog dial
NAVI/
MENU
GROUP
x
X
Labeling
You can label a track, group, or disc while
the recorder is stopped, recording or
playing. You can also label artist names
and album names to tracks in a disc used
in Hi-MD mode. Note that if you label a
track name, an artist name, or an album
name to a track while the recorder is
stopped, the track must be the currently
selected.
You can label a group while the recorder
is recording or playing a track in the
group, or while a track in the group is
selected and the recorder is stopped.
1 Enter the menu and select “Edit” -
Letter input area
“Title”.
The cursor flashes.
Character palette
Since only a part of the character palette
is visible on the display, use the controls
or buttons to move the cursor and enter
characters.
continued
Download from Www.Somanuals.com. All Manuals Search And Download.
45
2 Select one of the following, and then
The buttons used for character input
and their functions are listed below.
press the jog dial.
Functions1)
Operations
5-way control key
up
Title
Display
“Track”
“Group”
Track name
Group name
Artist name (to a track)1) “Artist”
To move the
cursor in the
character palette.
left
Album name (to a
track)1)
“Album”
right
Disc name
“Disc”
down
1) Appears only for discs used in Hi-MD mode.
Turn the jog dial (move
the cursor to the right
or left).
The cursor flashes in the letter input
area.
To select a letter Turn the jog dial.
in the letter input
area.
The cursor flashes.
To enter a letter. Press NENT.
To enter a title.
Press NENT for 2
seconds or more.
To insert a blank Press GROUP and
3 Press the 5-way control key towards
space.
press the 5-way control
key towards > at the
same time.
VOL –.
The cursor shifts from the letter input
area to the character palette.
To delete a letter. Press GROUP and
press the control key
towards . at the
The cursor and character alternate.
same time.
To cancel
labeling.
Press x for 2 seconds
or more.
To move the
cursor from the
letter input area
to the character
palette.
Press the 5-way control
key towards VOL –.
4 Select a letter using the 5-way control
key and press NENT to enter.
The selected letter appears in the
letter input area and the cursor moves
to the next input position.
To move the
cursor from the
character palette
to the letter input
area.
Press x.
The cursor flashes at the next input
position.
To display
Press X.
“_ (space)”, “:”,
“/”, or “–” at the
input position in
the letter input
area.
Download from Www.Somanuals.com. All Manuals Search And Download.
46
Functions1)
Operations
Assigning tracks or
groups as a new group
(Group Set)
To switch between Press X.
capital letters and
small letters.
1) Functions of the buttons or the control may
differ depending on when the cursor is in the
letter input area or in the character palette.
With this function, you can assign
existing tracks or groups to a new group,
and also you can assign a track that
currently belongs to no group to an
existing group.
You can create a maximum of 255 groups
on a Hi-MD disc or a standard disc in Hi-
MD mode and 99 groups on a standard
disc.
6 cPhreasrsacNtersEoNfTthfeorla2beslecnoanmdes.or more.
Note
When the recording is stopped or the recording
moves on to the next track while labeling titles
during recording, the input at that point is
entered automatically.
Disc
Track number
Group 2
Group 1
1 2 3 4 5 6 7 8 9 101112
Re-labeling
You can change the track name, artist
name, album name, group name, or disc
name by doing the procedure for
Assigning tracks 1 to 3 to a new
group
Assigning group 1 and group 2 to a
new group
To re-label a track name, artist
name, or album name:
Disc
Start playing the track you want to re-
label, and then change the track name,
artist name, or album name while the
recorder is playing, or while the recorder
is stopped and the track to be re-labeled is
currently selected.
Group 2
Group 1
1 2 3 4 5 6 7 8 9 101112
To re-label a disc:
You can re-label the disc while the
recorder is stopped, recording, or playing.
Registration of non-consecutive tracks is
not possible (for example, track 3 and
tracks 7 and 8 cannot be assigned to a new
group).
It is not possible to make a new group if
the first track or last track of the group has
been selected from the middle of an
existing group.
Notes
• The recorder is able to display, but cannot
label using Japanese “Katakana” characters.
• The recorder cannot rewrite a disc or track
name of more than 200 letters that was created
by another device (in MD mode only).
Track numbers appear according to their
order on the disc, not their order within
the group.
Download from Www.Somanuals.com. All Manuals Search And Download.
47
3 Turn the jog dial until the number of
the desired last track appears in the
display, and then press NENT to
enter.
Notes
• When the total number of characters in the
titles on a disc exceed the maximum that can
be input:
—If the disc is being used in Hi-MD mode,
you can make a group setting, but cannot
add a group name in step 4.
This selects the last track of the new
group and the group can be labeled. If
the disc contains groups, only the last
track number of each group is
—If the disc is being used in MD mode, you
cannot make a group setting.
• The tracks or groups must be sequential. If the
desired tracks or groups are not consecutive,
you must move them to make them
consecutive before you can assign them
Notes
track of an existing group or a track that does
not belong to a group.
sure the track comes after the one selected in
track of an existing group or a track that does
not belong to a group.
Jog dial
NAVI/
MENU
5-way control
x
key (NENT)
1 Enter the menu and select “Edit” -
: Set”.
2 “Turn the jog dial until the number of
the desired first track appears in the
display, and then press NENT to
enter.
This selects the first track of a new
group. If the disc contains groups,
only the first track number of each
group is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
48
Releasing a group
Moving recorded tracks
or groups (Move)
setting (Group Release)
Select a group you want to release and
check the contents (see “Playing tracks in
You can change the order of the recorded
tracks or groups.
Jog dial
Jog dial
NAVI/
MENU
NAVI/
MENU
5-waycontrol
key (NENT)
x
5-way control
x
key (NENT)
Changing the order of a track
on a disc
1 Select a group that you want to
release and check the contents (see
When you move tracks, track numbers are
automatically renumbered.
Example
3 Enter the menu and select “Edit” -
Move track C (track number 3) from the third to the
second track.
“
: Release”.
“Group Release?” and “PUSH
YES:ENTER NO:CANCEL” appear
A
B
C
B
D
D
4 PalrteesrsnaNtelyENinTthtoe dreislepalasey.a group.
Before moving
The group setting of the selected
group is released.
A
C
After moving
1 While playing the track you want to
move, enter the menu and select
“Edit” - “Move” - “
: Move”.
The selected track number appears in
the display.
continued
Download from Www.Somanuals.com. All Manuals Search And Download.
49
2 Turn the jog dial until the destination
2 When moving a track out of a group,
skip this step.
track number flashes in the display.
When moving a track to a different
group, turn the jog dial until the
destination group appears in the
display, and then press NENT.
For the example, since track C will be
moved to track “02”, turn the jog dial
until “02” appears in the display.
3 Press NENT to enter the selection.
3 Turn the jog dial until the destination
track number appears in the display,
and then press NENT to enter the
selection.
The track moves to the selected
destination track.
Moving a track in a disc with
group setting
Example: When moving the track to the track
number “ 03” in the second group (GP02).
You can move a track from one group out
of the group or to another group. You can
also move a track that does not belong to a
group to an existing group.
Disc
Changing the order of a
group on a disc
Group 2
Group 3
Group 1
1 2 3 4 5 6 1 2 3 4 1 2 3
1 While playing a track within a group
whose order you want to change,
enter the menu and select “Edit” -
“Move” - “
: Move”.
Moving track number 2 in group
1 to track number 3 in group 2
The group number to which the
currently playing track belongs
appears in the middle row of the
2 dTiusrpnlatyh.e jog dial to select the
destination point on the disc, and then
press NENT to enter the selection.
Disc
Group 1
Group 2
Group 3
Example: Moving the first group in the disc
(Group01) to the position between the
second (Group02) and the third (Group03)
group.
1 2 3 4 5 1 2 3 4 5 1 2 3
Download from Www.Somanuals.com. All Manuals Search And Download.
50
z
If the track or group has been labeled, press the
5-way control key towards > to make the
track or group name appear in the display
during operation. Press the control key towards
. to return to the track or group number
display.
Jog dial
NAVI/
MENU
Note
5-way control key
(NENT)
x
If all tracks are moved out of the group, the
group automatically disappears from the disc.
To erase a track
Erasing tracks and the
entire disc (Erase)
You can erase unnecessary tracks or all
tracks on a disc.
Note that once a recording has
been erased, you cannot retrieve it.
Make sure of the track you are
erasing.
1 While playing the track you want to
When erasing tracks that have
been transferred from the
computer
If you erased tracks that have been
transferred from the computer, the
transfer authorization of the tracks will be
as follows.
• If the tracks were transferred in Hi-MD
mode, the transfer authorization of the
tracks are restored automatically when
you insert the disc into the recorder and
then connect the recorder to the
computer.
• If the tracks were transferred in MD
mode, the transfer authorization of the
tracks is lost. If you do not want to lose
the transfer authorization, restore the
authorization by transferring the tracks
to the computer again before erasing
them.
erase, enter the menu and select
“Edit” - “Erase” - “
: Erase”.
“Erase OK?” and “PUSH
YES:ENTER NO:CANCEL” appear
in the display.
If the selected track was transferred
from the computer, “TrkFromPC
2 PErreassseNOKE?”NaTptpoeaerrsasien tthhee tdriascpkl.ay.
The track is erased and the next track
starts to play. All the tracks after the
one erased are automatically
renumbered.
Note
If all tracks in a group are erased, the group is
automatically deleted from the disc.
To erase a part of a track
Add track marks at the beginning and the
end of the part you want to erase, then
Note
You cannot erase non-audio data (for example,
text data or image data) on a disc used in Hi-
MD mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
51
3 Enter the menu and select “Edit” -
To erase a group
“Erase” - “AllErase”.
“ALL TRACK Erase OK?” and
“PUSH YES:ENTER NO:CANCEL”
appear in the display.
If the disc contains tracks that have
been transferred from the computer,
“TrkFromPC Erase OK?” appears in
You can erase tracks in a selected group.
Note that once a recording has
been erased, you cannot retrieve it.
Be sure to check the contents of
the group before you erase it.
4 tPhreesdsisNplaEy.NT to erase the whole
1 Select a group you want to erase and
disc.
“SYSTEM FILE WRITING” appears
in the display, and all the tracks will
be erased.
3 Enter the menu and select “Edit” -
“Erase” - “
: Erase”.
When erasing completes, “NO
TRACK” appears in the display in
Hi-MD mode and “BLANKDISC”
and “00:00” appear in MD mode.
“Group Erase OK?” and “PUSH
YES:ENTER NO:CANCEL” appear
in the display.
If the selected group contains tracks
that have been transferred from the
computer, “TrkFromPC Erase OK?”
4 aPprepsesarNs inEtNhTe dtoisperlaayse. the group.
The group is erased.
To erase the whole disc
You can quickly erase all the tracks and
data of the disc at the same time.
Note that once a recording has
been erased, you cannot retrieve it.
Be sure to check the contents of
the disc before you erase it.
In case of a Hi-MD disc or standard disc
in Hi-MD mode, only audio data is
erased. Other data such as text or image
data will not be erased.
1 Play the disc you want to erase to
2 cPhreescskxth.e contents.
Download from Www.Somanuals.com. All Manuals Search And Download.
52
To add track marks while
recording (except while
synchro-recording)
Press T MARK at the point you want to
add a track mark.
You can use Time Mark to add track
marks automatically at specified intervals
Dividing a track (Divide)
You can divide a track with a track mark,
creating a new track from the part
following the track mark. The track
numbers will increase as follows.
Notes
• You cannot add a track mark on a track that
has been transferred from your computer.
• You cannot divide a track that has been
recorded in Hi-MD mode using the MD
Simple Burner software.
• The Bookmark setting will be erased if you
carry out the Divide function.
• You cannot divide a track at its beginning or
end.
• You cannot divide a track if after the division
causes the total number of tracks on the disc to
exceed the maximum allowed (2,047 tracks
for a disc used in Hi-MD mode or 254 tracks
for a standard disc).
1
2
3
4
Track marking
1
2
3
4
5
Track numbers increase.
T MARK
Dividing a track directly
While playing or pausing, press T MARK
on the recorder at the point you want to
mark.
“MARK ON” appears in the display, and
a track mark is added. The track number
will increase by one.
Download from Www.Somanuals.com. All Manuals Search And Download.
53
2 Find the track mark by pressing the 5-
way control key towards .
slightly.
Combining tracks
(Combine)
When you record with analog (line) input,
unnecessary track marks may be recorded
where recording level is low. You can
erase a track mark to combine the tracks
before and after the track mark.
For example, to erase the third track
mark, find the beginning of the third
track. “00:00” appears in the display.
“MARK” appears in the display for a
3 fPerwessseTcoMndAsR. K to erase the mark.
The track numbers will change as follows.
“MARK OFF” appears in the display.
The track mark is erased and the two
tracks are combined.
Notes
• You cannot erase a track mark on a track that
has been transferred from your computer.
• You cannot erase a track mark on a track that
has been recorded in Hi-MD mode using the
MD Simple Burner software.
z
When a track mark is erased when you combine
two tracks, the recording date and title of the
second track changes to those of the first track.
• You cannot combine tracks recorded in
different recording mode.
Note
1
2
3
4
When you erase a track mark between the two
consecutive tracks that are assigned into
different groups, the second track is re-assigned
into the group containing the first track. In
addition, if you combine a track that is assigned
to a group with a track that is not assigned to a
group (two consecutive tracks), the second
track takes the same registration setting as the
first track.
Erase a track mark
1
2
3
Track numbers decrease
T MARK
5-way control key
(.)
X
1 While playing the track with the track
mark you want to erase, press X to
pause.
Download from Www.Somanuals.com. All Manuals Search And Download.
54
Formatting the disc
(Format)
Jog dial
NAVI/
MENU
When using a disc in Hi-MD mode, you
can use the Format function to restore a
disc to the condition it was in at the time
of purchase.
You can use this function only when using
a disc in Hi-MD mode.
5-way control key
(NENT)
x
Disc
type
After performing the
Format function
1 While the recorder is stopped, enter
2 T“Fuornrmthaet”j.og dial until “YES” appears
in the display, and then press NENT
to enter the selection.
1GB
Hi-MD
disc
“NO TRACK” appears.
All data including non-audio
data will be erased.
the menu and select “Edit” -
NOTE: Transfer authorization
of the transferred tracks can
be restored by connecting the
recorder with the disc inserted
to the computer.
When formatting completes, “NO
TRACK” appears in the display if a
1GB Hi-MD disc is inserted in the
recorder, or “BLANKDISC” appears
if a standard disc in Hi-MD mode is
inserted.
60/74/80- “BLANKDISC” appears.
minute
standard
disc
All data including non-audio
data will be erased. You can
then use the disc again in
either MD mode or Hi-MD
mode.
NOTE: Transfer authorization
of the transferred tracks will
be decreased by one.
Notes
• By formatting a disc, all data (including non-
audio data) will be erased. If you think a disc
contains such data, insert the disc into the
recorder and connect the recorder to the
computer to check the contents of the disc.
• If you format a disc, the transferred tracks on
the disc will also be erased and the number of
transfer authorizations for those tracks will be
decreased by one. To prevent the reduction in
transfer authorizations, restore the transfer
authorization by transferring the tracks to the
computer again before formatting the disc.
• The operation mode set in the “Disc Mode”
menu is applied to a blank 60/74/80-minute
standard disc used on the recorder even if a
different operation mode was selected in the
SonicStage software or a different operation
mode appeared on the display after the disc
was formatted by the SonicStage software.
Download from Www.Somanuals.com. All Manuals Search And Download.
55
Other operations
Changing the displayed
menu items (Menu
Mode)
You can specify the display of all items in
the menu (Advanced mode) or only basic
items (Simple mode).
check the menu items that cannot be
displayed.
Protecting your hearing
(AVLS)
The AVLS (Automatic Volume Limiter
System) function keeps down the
maximum volume to protect your ears.
Jog dial
NAVI/
MENU
Jog dial
NAVI/
MENU
5-way control key
(NENT)
1 Enter the menu and select “Option” -
5-way control key
2 “TAuVrnLtSh”e.jog dial until “AVLS On”
appears in the display, and then press
NENT to enter the selection.
(NENT)
1 Enter the menu and select “Option” -
2 “TMurenntuheMjoogded”i.al until “Simple” or
“Advanced” appears in the display,
and then press NENT to enter the
selection.
When you try to turn the volume too
high, “AVLS” appears in the display.
The volume is kept to a moderate
level.
To cancel the AVLS
Download from Www.Somanuals.com. All Manuals Search And Download.
56
Turning off the beep
sound
Storing the settings for
individual discs (Disc
Memory)
You can turn off/on the beep sound.
The recorder is factory set to
automatically store settings for each disc.
The recorder automatically stores the
settings for a disc and retrieves them
whenever the disc is inserted.
The following setting can be stored:
• Bookmark
Jog dial
NAVI/
MENU
• “Custom1” and “Custom2” settings of
6-Band Equalizer
You can check the setting as follows.
5-way control key
(NENT)
Jog dial
1 Enter the menu and select “Option” -
NAVI/
MENU
2 “TBurenepth”e. jog dial until “Beep Off”
appears in the display, and then press
NENT to enter the selection.
5-way control key
(NENT)
To turn on the beep sound
Select “Beep On” in step 2.
1 Remove the disc from the recorder,
enter the menu and select “Option” -
2 “TDurinscthMeejmog”.dial until “On” appears
in the display, and then press NENT
to enter the selection.
To set the recorder so that
disc settings are not stored
Erasing the disc information
1 Insert the disc whose information is
2 tSoelbeecter“a1sMedemanEdravseer”ifyinitsstecpon2t.ents.
The disc information is erased.
z
When “Disc Mem” is set to “On”, “Disc
Memory” appears whenever a disc for which
settings have been stored is inserted.
Download from Www.Somanuals.com. All Manuals Search And Download.
57
Notes
Note
• Settings for up to 64 discs can be stored. Any
settings stored afterwards will replace the
settings with the lowest frequency of use
among the 64. The numbers of discs that can
be stored depend on the numbers of tracks
recorded on the discs. More tracks recorded
per disc means fewer discs can be stored.
• If you try to erase the disc information of a
disc that have never been stored, “NO DISC
MEMORY” appears in the display for a few
seconds.
When the quick mode is set to “Quick On”, the
power remains on within the recorder even
when nothing appears in the display. When the
battery becomes completely drained, the
internal power supply of the recorder turns off
automatically.
Selecting the disc
mode (Disc Mode)
When you insert a 60/74/80-minute
standard disc (blank) into the recorder,
you can use this function to specify use of
the disc in Hi-MD mode or MD mode.
If you want to use the disc recorded on
this unit on another component that does
not support Hi-MD, record the disc with
“Disc Mode” in the menu set to “MD”.
Starting the playback
quickly (Quick Mode)
The recorder is factory set to quickly start
playback after the playback button is
pressed.
You can check the setting as follows.
Jog dial
Jog dial
NAVI/
NAVI/
MENU
MENU
5-way control
key (NENT)
5-way control
key (NENT)
1 Enter the menu and select “Option” -
1 Enter the menu and select “Option” -
2 “TDurinscthMeojodge”d.ial until “Hi-MD”
(factory setting) or “MD” appears in
the display, and then press NENT to
enter the selection.
2 “TQurunictkhMe joodged”i.al until “Quick On”
appears in the display, and then press
NENT to enter the selection.
If you will not use the recorder
for a long time
You can minimize battery drain while the
recorder is not being used.
Download from Www.Somanuals.com. All Manuals Search And Download.
58
Notes
Changing the
• Even if you select “MD” as the “Disc Mode”
setting, the operation mode can only be “Hi-
MD” when using a 1GB Hi-MD disc.
• The operation mode set in the “Disc Mode”
menu is applied to a blank 60/74/80-minute
standard disc used on the recorder even if a
different operation mode was selected in the
SonicStage software or a different operation
mode appeared on the display after the disc
was formatted by the SonicStage software.
operational direction of
the display
When you turn the jog dial clockwise, the
display scrolls downward. This is the
factory setting. You can change the
factory setting to scroll in the opposite
direction.
Jog dial
NAVI/
MENU
Adjusting the contrast
of the display window
(Contrast Adjustment)
You can adjust the contrast of the display
window.
5-way control key
(NENT)
Jog dial
1 Enter the menu and select “Option” -
NAVI/
MENU
2 “TJuorgn Dthiealj”o.g dial until “Reverse”
appears in the display, and then press
NENT to enter the selection.
5-way control key
(NENT)
To turn the setting to normal
1 While the recorder is stopped, enter
the menu and select “Option” -
2 “TCuronnttrhaestj”o.g dial to adjust the
contrast, and then press NENT to
enter the selection.
Download from Www.Somanuals.com. All Manuals Search And Download.
59
Using the recorder with a computer
What you can do
through connection
with a computer
Connecting the
recorder to your
computer
To use the recorder connected to a
computer, you must install the software
from the supplied CD-ROM. For details
on the installation procedure, refer to the
“Software Operation” section.
When you connect the dedicated USB
cable directly to the USB connecting jack
on the recorder, power (bus power) is
supplied from the USB port of the
computer. This allows the recorder to be
used without power being supplied from
the battery.
When using the supplied
softwares
For detailed explanations, see the
“Software Operation” section or online
help.
Notes
• When using Windows 2000 Professional
Be sure the dedicated USB cable is
disconnected before turning on or restarting
the computer. If the dedicated USB cable is
connected at this time, but then disconnected
afterwards, the computer may not recognize
the recorder the next time you connect the
dedicated USB cable. When the computer
does not recognize the recorder, disconnect
the dedicated USB cable, restart the computer,
and then reconnect the dedicated USB cable.
The problem described here may be resolved
by updating your Windows operating system
so that it contains all the latest features.
• When using Windows ME or Windows 98SE
If you connect the recorder to the computer
with the disc mode on the recorder set to “Hi-
MD” (factory setting), and then insert a 60/74/
80-minute standard disc, the operation mode
of the disc may automatically change to Hi-
MD mode even if you do not record anything.
• When using Windows ME or Windows 98SE
When you disconnect the dedicated USB
cable, the message “Unsafe Removal of
Device” appears in the computer display. This
is not a problem. Merely click “OK” to make
the message disappear.
• Transfer audio data between the
computer and the recorder
The supplied SonicStage software
enables you to transfer audio data
between the recorder and the computer.
When a disc used in Hi-MD mode is
inserted in the recorder, tracks recorded
with a microphone or from a CD player
to the recorder can be migrated to your
computer.
• Record directly from a CD to an MD
The supplied MD Simple Burner
software enables you to record a CD in
the computer’s CD-ROM drive directly
to a disc in the recorder.
When using the disc in the
recorder as a storage device
When using a disc in Hi-MD mode, the
recorder appears in the Windows Explorer
as an external drive, allowing you to
transfer non-audio data such as text and
image files. For details, refer to “Storing
z
If you play audio files using the software, the
sound is output from the computer speakers
during Hi-MD mode and from the headphones/
earphones connected to the recorder during MD
mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
60
When you unplug the
dedicated USB cable from the
computer or remove the disc
from the recorder
Computer
Be sure to remove the recorder or the disc
as follows. If not, damage to the data may
occur.
To the USB port
1 Make sure that “REC” is not
2 Pdirsepslsaxyedoninththeeredcisoprdlaeyr.window.
Dedicated
USB cable
“EJECT DISC OK” appears in the
display.
Depending on the conditions, it may
take some time until “EJECT DISC
3 OUnKp”luagpptheaerdseidnicthaeteddisUpSlaBy.cable
from the computer or remove the disc
from the recorder.
To the
USB cable
connecting jack
Notes
• If you use the recorder connected to the
computer, it is recommended that you connect
the AC power adaptor or insert a fully charged
rechargeable battery or new alkaline dry
battery as a precaution against power failures,
disconnection of the dedicated USB cable or
other unforeseen occurrences. We do not
assure the results should there be a mis-
operation, transfer failures, or destruction of
audio data caused by unforeseen occurrences.
• If you disconnect the dedicated USB cable
from the recorder and want to reconnect it,
make sure to wait at least 2 seconds before
connecting it again.
• Make sure to place the recorder at a stable,
vibration-free place during recording.
• Make sure not to connect the recorder to your
computer during recording or playing.
• The system may malfunction if your computer
changes to system suspend, sleep, or
1 Insert a recordable disc into the
2 rMecaokredceor.nnections as follows.
1 Connect the dedicated USB cable to
the recorder and to the computer.
2 Make sure the recorder is stopped
and HOLD is released.
3 Check the connections.
When the connections have been
properly made, “PC – –MD” appears
in the display.
hibernation mode while connecting to the
recorder. Make sure to disable any changes to
suspend, sleep, or hibernation mode.
• Make sure not to connect the recorder and the
computer through a USB hub.
• It is not possible to charge the rechargeable
battery in the recorder while using the bus
power connection.
Download from Www.Somanuals.com. All Manuals Search And Download.
61
• We do not ensure trouble-free operation on all
computers that satisfy the system
requirements.
Storing non-audio data
to a disc
If you connect the recorder to a computer
with a disc in Hi-MD mode inserted, the
disc is recognized as storage media by the
Windows Explorer, allowing you to store
non-audio data such as text data or image
data.
For the storage space for each disc, refer
to the next page.
When you insert a disc in Hi-MD mode
into the recorder and make connection
with the computer, the recorder is
recognized as an external device and can
be viewed on the Windows Explorer. You
can use the recorder in the same way as
other devices.
Notes
• When the SonicStage software is active, the
recorder is not recognized as a data storage
device.
• If you format a disc on the computer, make
sure to format the disc using the SonicStage
software.
• Make sure not to delete the file management
folder (HMDHIFI folder and Hi-MD.IND
folder) on the Windows Explorer.
Download from Www.Somanuals.com. All Manuals Search And Download.
62
The storage space for each disc (formatted with the recorder/the
SonicStage software)
Disc type
Total size
Disc management
space1)
Free space
60-minute
standard disc
219 MB
(229,965,824 bytes)
832 KB
(851,968 bytes)
218 MB
(229,113,856 bytes)
74-minute
standard disc
270 MB
(283,312,128 bytes)
832 KB
(851,968 bytes)
269 MB
(282,460,160 bytes)
80-minute
standard disc
291 MB
(305,856,512 bytes)
832 KB
(851,968 bytes)
290 MB
(305,004,544 bytes)
Hi-MD disc
964 MB
832 KB
963 MB
(1,010,761,728 bytes)
(1,011,613,696 bytes) (851,968 bytes)
1) This is space that is used for managing the files on the disc.
Download from Www.Somanuals.com. All Manuals Search And Download.
63
Additional information
• Never wrap the recorder in anything when it is
being used with the AC power adaptor. Heat
build-up in the recorder may cause
malfunction or damage.
Precautions
On safety
Do not put any foreign objects in the DC IN 3V
jack.
On the headphones/earphones
Road safety
Do not use headphones/earphones while
driving, cycling, or operating any motorized
vehicle. It may create a traffic hazard and is
illegal in many areas. It can also be potentially
dangerous to play your recorder at high volume
while walking, especially at pedestrian
crossings. You should exercise extreme caution
or discontinue use in potentially hazardous
situations.
On power sources
• Use house current, nickel metal hydride
rechargeable battery, or LR6 (size AA)
battery.
• For use in your house: use the AC power
adaptor supplied with this recorder. Do not
use any other AC power adaptor since it may
cause the recorder to malfunction.
Polarity of the plug
Preventing hearing damage
Avoid using headphones/earphones at high
volume. Hearing experts advise against
continuous, loud and extended play. If you
experience a ringing in your ears, reduce the
volume or discontinue use.
• Connect the AC power adaptor to an easily
accessible AC outlet. Should you notice an
abnormality in the AC power adaptor,
disconnect it from the AC outlet immediately.
• The recorder is not disconnected from the AC
power source (mains) as long as it is
connected to the wall outlet, even if the
recorder itself has been turned off.
Caring for others
Keep the volume at a moderate level. This will
allow you to hear outside sounds and to be
considerate of the people around you.
• If you are not going to use this recorder for a
long time, be sure to disconnect the power
supply (AC power adaptor, dry battery, or
rechargeable battery). To remove the AC
power adaptor from the wall outlet, grasp the
adaptor plug itself; never pull the cord.
On the remote control
The supplied remote control is designed for use
with this recorder only. The recorder cannot be
operated with a remote control that was
supplied with another device.
On charging
On heat build-up
• Do not charge any other battery beside the
supplied one or the one designated for it
(NH-7WMAA).
Heat may build up in the recorder if it is used
for an extended period of time. This, however,
is not a malfunction.
• Be sure to use the supplied AC power adaptor.
• Charge the rechargeable battery at a
temperature of +5° C (+41° F) to +35° C
(+95° F).
• The recorder may become hot during the
charging procedure; this, however poses no
danger.
On installation
• If you use the recorder at a place subject to
static or electrical noise, the recording may
not be properly done or the recorded data may
be lost. If you perform a transfer operation at
such a place, the track’s transfer authorization
may be lost.
• Never use the recorder where it will be
subjected to extremes of light, temperature,
moisture or vibration.
Download from Www.Somanuals.com. All Manuals Search And Download.
64
• Because of the battery’s characteristics, the
capacity of the rechargeable battery may be
smaller than normal when it is used for the
first time or after a long period of disuse. In
this case, charge and discharge the battery
several times. The normal battery life will be
restored.
• When the recorder is not to be used for a long
time, be sure to remove the battery.
• If a battery leak should develop, carefully and
thoroughly wipe away battery fluid from the
battery compartment before inserting new
ones.
• If the capacity of the rechargeable battery
drops to half the normal amount, replace with
the new one.
• If the recorder will be unused for a long time,
remove the rechargeable battery and remove
the AC power adaptor from the wall outlet.
On mechanical noise
The recorder gives off mechanical noise while
operating, which is caused by the power-saving
system of the recorder and it is not a problem.
To protect a recorded disc
To record-protect a disc, slide open the tab at
the side of the disc. In this position, the disc
cannot be recorded. To record again, slide the
tab back so the tab is visible.
On the MiniDisc cartridge
• When carrying or storing the MiniDisc, keep
it in its case.
• Do not break open the shutter.
• Do not place the cartridge where it will be
subject to light, extreme temperatures,
moisture or dust.
Tab
• Attach the supplied disc label only in the
space designated for it on the disc. Do not
stick it on any other disc surface.
Recorded material is
protected.
On cleaning
Back of the disc
• Clean the recorder casing with a soft cloth
slightly moistened with water or a mild
detergent solution. Do not use any type of
abrasive pad, scouring powder or solvent such
as alcohol or benzene as it may mar the finish
of the casing.
Recorded material is
not protected.
• Wipe the disc cartridge with a dry cloth to
remove dirt.
• Dust on the lens may prevent the unit from
operating properly. Be sure to close the disc
compartment lid after inserting or ejecting a
disc.
• To obtain the best sound quality, use a dry
cloth to wipe the plugs of the headphones/
earphones or the remote control. Dirty plugs
may cause sound distortion or intermittent
breaks in the sound.
On maintenance
Clean the terminals periodically with a cotton
swab or a soft cloth as illustrated.
If you have any questions or problems
concerning your recorder, please consult your
nearest Sony dealer. (If a trouble occurred when
the disc was in the recorder, we recommend that
the disc be left in the recorder when you consult
your Sony dealer so that the cause of trouble
may be better understood.)
On battery
Incorrect battery usage may lead to leakage of
battery fluid or bursting battery. To prevent
such accidents, observe the following
precautions:
• Install the + and – poles of the battery
correctly.
Download from Www.Somanuals.com. All Manuals Search And Download.
65
Inputs
MIC: stereo mini-jack
(minimum input level 0.13 mV)
stereo mini-jack for analog input
(minimum input level 49 mV)
optical (digital) mini-jack for optical
(digital) input
Specifications
Audio playing system
MiniDisc digital audio system
Laser diode properties
Material: GaAlAs
Wavelength: λ = 790 nm
Emission duration: continuous
Laser output: less than 44.6 µW
(This output is the value measured at a distance
of 200 mm from the lens surface on the optical
pick-up block with 7 mm aperture.)
Recording and playback time
When using HMD1G (1GB disc):
Maximum 34 hours in Hi-LP stereo
When using MDW-80 in Hi-MD mode:
Maximum 10 hours and 10 min. in Hi-LP
stereo
Outputs
jack)
Maximum output (DC)
Headphones:
3 mW + 3 mW (16 Ω) (European models)
5 mW + 5 mW (16 Ω) (Other models)
Power requirements
Sony AC Power Adaptor connected at the DC
IN 3V jack:
120 V AC, 60 Hz (Models for USA, Canada,
Mexico, and Taiwan)
When using MDW-80 in MD mode:
Maximum 160 min. in monaural
Maximum 320 min. in LP4 stereo
Revolutions
240 V AC, 50 Hz (Model for Australia)
220 V AC, 50 Hz (Models for China and
Argentine)
100 - 240 V AC, 50/60 Hz (Other models)
The recorder:
350 rpm to 3,000 rpm (CLV)
Error correction
Nickel metal hydride rechargeable battery
NH-7WMAA 1.2V 700 mAh (MIN) Ni-MH
LR6 (size AA) alkaline battery
AC power adaptor DC 3V
Operating temperature
+5° C (+41° F) to +35° C (+95° F)
Battery operation time2)
Dimensions
Hi-MD:
LDC (Long Distance Code)/BIS (Burst
Indicator Subcode)
MD:
ACIRC (Advanced Cross Interleave Reed
Solomon Code)
Sampling frequency
44.1 kHz
Sampling rate converter
Input: 32 kHz/44.1 kHz/48 kHz
Coding
Approx. 81.0 × 29.2 × 78.9 mm (w/h/d)
(31/4 × 113/16 × 31/8 in.) (excluding projecting
parts and controls)
Hi-MD:
ATRAC3plus (Adaptive TRansform
Acoustic Coding 3 plus)
MD:
Mass
Approx. 103 g (3.7 oz) (the recorder only)
Approx. 122 g (4.4 oz) (including the
rechargeable battery)
ATRAC
ATRAC3 — LP2/LP4
Modulation system
Hi-MD:
1-7RLL (Run Length Limited)/PRML
(Partial Response Maximum Likelihood)
MD:
EFM (Eight to Fourteen Modulation)
Frequency response
20 to 20,000 Hz ± 3 dB
1)The LINE IN (OPT) jack is used to connect
either a digital (optical) cable or a line
(analog) cable.
2)Measured in accordance with JEITA.
US and foreign patents licensed from Dolby
Laboratories.
Design and specifications are subject to change
without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
66
Optional accessories
Optical Cable
POC-151HG, POC-152HG, POC-MZ1,
POC-MZ2, POC-15B, POC-15AB, POC-
DA12SP
Line Cable
RK-G129, RK-G136
Stereo Microphones
ECM-MS907, ECM-MS957
MDR-series Stereo Headphones/earphones*
SRS-series Active Speakers
Recordable MDs MDW-series
Recordable Hi-MD disc
HMD1G
Your dealer may not handle some of the above
listed accessories. Please ask the dealer for
detailed information about the accessories in
your country.
∗ When using optional headphones, use only
headphones/earphones with stereo mini
plugs. You cannot use headphones/
earphones with micro plugs.
Download from Www.Somanuals.com. All Manuals Search And Download.
67
Troubleshooting and explanations
Troubleshooting
If a problem occurs during recorder operation, follow the steps described below before
consulting the nearest Sony dealer. If any messages appear, it is recommended to take
notes.
2 ICfhaefctekr“sMtepes1saygoeus”st(ipllagcaen7n6o)tfsoorlvtheethperopbrloebmleams,wcoelnls.ult your nearest Sony dealer.
While charging
Symptom
Cause/Remedy
The rechargeable
battery does not start
charging. The
• The rechargeable battery has been inserted incorrectly or the AC
power adaptor has been connected incorrectly.
, Insert the rechargeable battery correctly or connect the AC
power adaptor correctly.
rechargeable battery
cannot be fully charged. • Because of the battery’s characteristics, the capacity of the
rechargeable battery may be smaller than normal when it is used
for the first time or after a long period of disuse.
, Charge and discharge the battery several times. The normal
battery life will be restored.
• The rechargeable battery is drained (nothing appears in the display
window).
, Charge the rechargeable battery. It takes one minute after
pressing x • CANCEL/CHG for an indication to appear and
charging to start. If charging does not start even after a minute,
disconnect the AC power adaptor from the recorder, connect it
again and press x • CANCEL/CHG.
• The surrounding temperature is too high or too low (“CHARGE
5° C–35° C 41F–95F” appears in the display).
, Charge the battery at a temperature of +5° C (+41° F) to +35° C
(+95° F).
The rechargeable
battery has become
drained even when the
recorder was not used
for a while.
• The quick mode was set to “Quick On”.
, If you set the quick mode to “Quick On”, the power stays on
inside recorder even when there is no operation, causing the
rechargeable battery is not fully charged, the battery may
become drained after a while. If this happens, charge the
Even when fully
• The useful life of the rechargeable battery may be ending.
, Replace the rechargeable battery with the new one.
charged, the life of the
battery is only about
half what it normally is.
The recorder becomes • This is normal and poses no danger.
hot during the charging
procedure.
Download from Www.Somanuals.com. All Manuals Search And Download.
68
While recording
Symptom
Cause/Remedy
“NotENOUGH
• Recording is not possible when using a 1GB Hi-MD disc even
when the battery level indication shows enough power remaining
while the recorder is stopped or playing. This is because of a
mechanism that disables recording when the remaining battery
power is estimated by the recorder to be insufficient due to the high
power consumption required for 1GB Hi-MD disc recording.
, Connect the AC power adaptor to the recorder or insert a fully
charged rechargeable battery or a new alkaline dry battery.
POWER TO REC”
appears and recording
cannot be done on a
1GB Hi-MD disc.
Even though the free
space appears as
• This is the system limitation. “2.0MB” is the capacity of a reserve
domain.
“2.0MB”, the remaining
time for recording
appears as “–0:00:00”
and the recording cannot
be done.
The recorder always
creates a new group
when recording.
• The group recording (“
cannot overwrite tracks.)
, Set the group recording setting to “
:REC”) is set to “
: REC On”. (You
The first few seconds of • If you start recording while the disc indication is rotating, data will
a track cannot be
recorded.
not be recorded to the first few seconds of the first track.
, Wait until the disc indication stops rotating before you start
recording.
Recording cannot be
done correctly.
• Audio sources may not be securely connected.
, Disconnect the audio sources once and connect them again
• There is no digital signal from the portable CD player.
, When recording digitally from a portable CD player, use the
AC power adaptor and disable the anti-skip function (such as
• The analog recording was made using a connecting cord with an
attenuator.
, Use a connecting cord without an attenuator.
• Recording level is too small to record (when adjusting the
recording level manually).
• The recorder is connected to the computer.
, Disconnect the recorder from the computer when recording.
• The power sources was disconnected or a power outage occurred
during recording.
, The recording result is not recorded on the disc. Make
recording again.
• The premastered disc is inserted.
, Replace to the recordable disc.
• Recording may not be done if the remaining recordable time on the
disc is 48 seconds or less (“DISC FULL” appears).
, Replace the disc.
Download from Www.Somanuals.com. All Manuals Search And Download.
69
Symptom
Cause/Remedy
Stereo sound is heard in • This is normal. During digital recording, the sound will be stereo
the headphones/
earphones while
in the headphones/earphones, even though the recorded sound is
monaural.
recording in monaural.
Momentary noise is
heard when recording.
• Due to the special digital audio compression technology used in
LP4 stereo mode, momentary noise may occur on very rare
occasions with certain sound sources.
, Record in SP or LP2 mode.
The lid does not open
after recording.
• The lid does not open until “SYSTEM FILE WRITING”
disappears in the display.
“TRACK FULL”
• This is due to the MiniDisc system limitation. When 254 tracks (on
a standard disc) or 2,047 tracks (on a disc used in Hi-MD mode)
have been recorded on the disc, “TRACK FULL” appears
regardless of the total recorded time. More than 254 or 2,047 tracks
cannot be recorded on the disc.
appears even before the
disc has reached the
maximum recording
time and the recording
cannot be done.
, To continue recording, erase unnecessary tracks.
The remaining
• This is due to the MiniDisc system limitation (in MD mode only).
Tracks of under 12 seconds (in SP stereo), 24 seconds (in LP2
stereo mode or monaural), or 48 seconds (in LP4 stereo mode) in
length are not counted and so erasing them may not lead to an
increase in the recording time.
recording time does not
increase even after
erasing numerous short
tracks.
The total recorded time • This is due to the MiniDisc system limitation (in MD mode only).
and the remaining time
on the disc may not total
the maximum recording
time (60, 74, or 80
minutes).
Normally, recording is done in minimum units of approximately 2
seconds (in SP stereo), 4 seconds (in LP2 stereo mode or
monaural), or 8 seconds (in LP4 stereo mode). When recording is
stopped, the last unit of recording always uses this unit of 2
seconds, 4 seconds, or 8 seconds even if the actual recording is
shorter. Likewise, when recording is restarted after the stop, the
recorder will automatically insert a blank space amounting to 2
seconds, 4 seconds, or 8 seconds before the next recording. (This is
to prevent accidental erasing of a previous track whenever a new
recording is started). Therefore, the actual recording time will
decrease whenever a recording is stopped by a maximum of 6
seconds, 12 seconds, or 24 seconds.
“TRACK FULL”
• This is due to the MiniDisc system limitation. Repeated recording
and erasing may cause fragmentation and scattering of data.
Although those scattered data can be read, each fragment is
counted as a track. In this case, the number of tracks may reach
254 (on a standard disc) or 2,047 (on a disc used in Hi-MD mode)
and further recording is not possible.
appears even before the
disc has reached the
maximum track number
or recording time.
, To continue recording, erase unnecessary tracks.
Download from Www.Somanuals.com. All Manuals Search And Download.
70
While playing
Symptom
Cause/Remedy
A disc is not played • Repeat play is selected.
normally.
, Enter the Sub play mode to change back to the normal play
• Playback mode is changed.
, Enter the Main play mode or Sub play mode to change back to the
A disc is not played • Disc playing stopped before it came to the last track.
from the first track.
, Press the 5-way control key (NENT) on the recorder or press
NX on the remote control for 2 seconds or more to start playing.
Playback sound
skips.
• The recorder is placed where it receives continuous vibration.
, Put the recorder on a stable place.
• A very short track may cause sound to skip.
, Try not to create a short track.
Sound has a lot of
static.
• Strong magnetism from a television or such device is interfering with
operation.
, Move the recorder away from the source of strong magnetism.
The volume of the
recorded track is low.
• The track was recorded in analog mode (in digital mode, the recording
level is automatically set to the same level as that of the sound source).
Or you used a connecting cord with an attenuator.
, Use a correct connecting cord without an attenuator.
• The recording level was low.
Volume cannot be
turned up.
• AVLS is on.
No sound comes
through the
headphones/
earphones.
• The headphones/earphones plug is not firmly connected.
, Plug in the plug of the headphones/earphones firmly to the remote
control. Plug in the plug of the remote control firmly to i.
• The plug is dirty.
, Clean the plug.
The disc cannot be
played on another
component.
• The component does not support Hi-MD.
, Discs used in Hi-MD mode can be played only on components
that supports Hi-MD.
The recorder skips to • You pressed GROUP before pressing the 5-way control key towards
the next or previous
group (or skips
several tracks ahead
or behind) when you
press the 5-way
. or >.
, The recorder returns to normal if no operation is made for 5
seconds.
control key towards
. or >.
The edited tracks
may exhibit sound
dropout during
• This occurs due to the MiniDisc system limitation. The fragmentation
of data may cause sound dropout while searching because the tracks
are played in higher speed than normal playback.
search operations.
Download from Www.Somanuals.com. All Manuals Search And Download.
71
Symptom
Cause/Remedy
There is no R-
• There is no R-channel output if the cassette deck or an amplifier is
connected with a monaural cord.
, Make sure to use a stereo connecting cord. If, however, the
connected equipment is monaural, there will be no R-channel
sound output even with a stereo connecting cord.
channel sound output
when playing a track
recorded from a
cassette deck or
through an amplifier,
or when listening to
sound from a cassette
deck or amplifier.
While editing
Symptom
Cause/Remedy
“NotENOUGH
• Editing is not possible when using a 1GB Hi-MD disc even when the
battery level indication shows enough power remaining while the
recorder is stopped or playing. This is because of a mechanism that
disables editing when the remaining battery power is estimated by the
recorder to be insufficient due to the high power consumption required
for 1GB Hi-MD disc editing.
POWER TO EDIT”
appears and editing
cannot be done on a
1GB Hi-MD disc.
, Connect the AC power adaptor to the recorder or insert a fully
charged rechargeable battery or a new alkaline dry battery.
The lid does not
open.
• The power sources have been disconnected during recording or
editing, or the battery have been exhausted.
, Set the power sources again, or replace the exhausted battery with
new ones.
Editing cannot be
done.
• The power source has been disconnected or a power outage has
occurred during editing.
, The editing done to that point is not saved to the disc. Do the
editing operation again.
Non-audio data
cannot be erased.
• Non-audio data cannot be erased with the Erase function.
, Confirm the contents by connecting the recorder to your
computer. If it is okay to delete the contents, then perform the
Format function (page 55).
Tracks cannot be
combined.
• This is due to the MiniDisc system limitations. When the tracks are
scattered and the length of each track is short*, you may not be able to
combine the tracks.
* Combining tracks of the following lengths may not be possible.
Hi-MD mode
Linear PCM stereo: 9 seconds or less
Hi-SP stereo: 8 seconds or less
Hi-LP stereo: 32 seconds or less
MD mode
SP stereo: 12 seconds or less
LP2 stereo/Monaural: 24 seconds or less
LP4 stereo: 48 seconds or less
Download from Www.Somanuals.com. All Manuals Search And Download.
72
Symptom
Cause/Remedy
Tracks cannot be
combined.
• You cannot combine tracks recorded in different recording modes,
e.g., a track recorded in stereo and a track recorded in monaural; nor
can you combine a track recorded with digital connection and a track
recorded with analog connection.
The disc cannot edit • The component does not support MDLP or Hi-MD.
on other component. , Edit on other component that support MDLP or Hi-MD.
While using group function
Symptom
Cause/Remedy
The group function • While using a disc without group setting, an attempt was made to select
does not operate.
some group-related menu.
, Use a disc with group setting.
A track cannot be
recorded to a new
group. A new group
cannot be created.
• This is due to the MiniDisc system limitations (in MD mode only).
Group information has been written to the area where the disc name is
stored. The disc name and track names are recorded in the same area,
which can store a maximum of approximately 1,700 characters. If the
total number exceeds this amount, a new group cannot be created even
though group mode is on. It is also impossible to make group settings at
this time.
While the recorder is connected to the computer
Symptom
Cause/Remedy
The recorder is not • The dedicated USB cable is not firmly connected.
recognized by the
computer.
, Connect the dedicated USB cable firmly to the recorder and the
computer.
• A USB hub is used.
, Connect the dedicated USB cable directly to the USB port of the
computer.
• Network communication has failed.
, Disconnect the dedicated USB cable, wait at least 2 seconds, and
then reconnect it. If the recorder is still not recognized, disconnect
the dedicated USB cable, restart the computer, and then connect the
dedicated USB cable again
Even though the
recorder is
recognized by the
computer, it does
not operate
• A USB hub is used.
, Connect the dedicated USB cable directly to the USB port of the
computer.
• You are using the recorder at a place with vibration.
, Use the recorder at a place with no vibration.
normally.
The recorder cannot • The SonicStage or MD Simple Burner software is active.
be used as a storage
device.
, Close the SonicStage or MD Simple Burner software.
• A standard disc is inserted.
, Insert a disc used in Hi-MD mode. Only discs used in Hi-MD mode
can be used as a storage media.
Download from Www.Somanuals.com. All Manuals Search And Download.
73
Symptom
Cause/Remedy
The playing time of This is due to a calculation discrepancy between the recorder and the
a transferred track is computer.
different from the
time that appears on
your computer
monitor.
You cannot transfer • The minimum recordable time on a disc is normally 2 seconds in
tracks that will fill
up the remaining
recording time on
the disc.
stereo, 4 seconds in LP2 stereo mode, and 8 seconds in LP4 stereo
mode. When you transfer a track from your computer, the recorder
needs a 2-second (or 4- or 8-second) space for a track even if the track
is under 2 seconds (or 4 or 8 seconds) in length. Also, the recorder
inserts a 2-second (or 4 -or 8-second) space in between tracks during
transfer operation. For this reason, the recorder needs an additional 6
seconds (or 12 or 24 seconds) for each track. This reduces the
maximum recording time for each track by 6 seconds (or 12 or 24
seconds) during transfer operation (in MD mode only).
The disc size
• The difference is due to the use of the binary system to indicate the disc
size on the computer and the decimal system to express the disc size on
the disc and other recording media. For details on the disc size, see
displayed on the
computer is not the
same as the disc
size printed on the
disc.
You cannot operate • You cannot operate the recorder while the recorder is connected to the
the recorder (“PC –
–MD” appears).
computer.
Others
Symptom
Cause/Remedy
Some menu items
cannot be
displayed.
• “Menu Mode” is set to “Simple”.
, Set the “Menu Mode” to “Advanced” to display all the menu items.
The recorder does
not work or works
poorly.
• The rechargeable battery is not charged.
, Charge the rechargeable battery.
• The volume is low.
, Turn up the volume.
• No disc is inserted.
, Insert a recorded disc.
• The HOLD function is turned on (“HOLD” appears in the display
when you press an operation button on the recorder).
, On the recorder, disable HOLD by sliding the HOLD switch to the
• The lid is not firmly closed.
, Close the lid until it clicks. Then slide OPEN to open the lid.
• Moisture has condensed inside the recorder.
, Take the disc out and leave the recorder in a warm place for several
hours until the moisture evaporates.
Download from Www.Somanuals.com. All Manuals Search And Download.
74
Symptom
Cause/Remedy
The recorder does
not work or works
poorly.
• The AC power adaptor is not firmly connected.
, Connect the AC power adaptor firmly to the DC IN 3V jack on the
recorder.
• The rechargeable battery or dry battery is weak (“LOW BATTERY”
flashes or nothing appears).
, Charge the rechargeable battery, replace the dry battery with a new
one, or use the supplied AC power adaptor.
• The disc is damaged or does not contain proper recording or editing
data.
, Reinsert the disc. Rerecord the disc. If the error message still
appears, replace it with another disc.
• There is a built-in malfunction in the system.
• While operating, the recorder received a mechanical shock, too much
static, abnormal power voltage caused by lightning, etc.
, Restart the operation as follows.
1 Disconnect all the power sources and the dedicated USB cable.
2 Leave the recorder for about 30 seconds.
3 Connect the power source.
The display
window is not
normal.
• The recorder was disconnected from the power source.
, Let the recorder sit for a while, or disconnect the power source,
reconnect it, and then press any of the operation buttons.
When using with
the AC power
adaptor, the display
window of the
recorder will
• This is due to the MiniDisc system limitation. The recorder turns off 3
minutes after the recorder has stopped in order to allow the charging
time to be calculated.
remain faintly lit
for some time even
after the recorder is
stopped.
The operation mode • When using a blank 60/74/80-minute standard disc in the recorder, the
of the blank 60/74/
80-minute standard
disc differs from the
mode following
formatting or the
mode selected in
the SonicStage
operation mode set in the “Disc Mode” menu is applied.
, Use the “Disc Mode” menu to change the operation mode as
desired.
software.
Download from Www.Somanuals.com. All Manuals Search And Download.
75
Messages
If the following messages flash in the display window, check the chart below.
Message
Meaning/Remedy
AVLS NO
VOLUME
OPERATION
• AVLS is set to “AVLS On” and so the volume cannot rise higher.
BLANKDISC • A disc with no recording on it is inserted.
BUSY WAIT
A MOMENT
• The recorder is accessing disc information.
• You tried to operate the recorder while it was accessing the recorded data.
, Wait until the message goes out (in rare cases, it may take a few
minutes).
CANNOT
EDIT
• You selected, “
recording.
: Set”, “
: Release”, “Move”, or “Erase” while
• You tried to erase the track mark at the beginning of the first track or group.
• You tried to erase a track mark to combine tracks the recorder cannot
combine (a track recorded in stereo and in mono, for example).
• You tried to overwrite a track marks.
• You tried to change a title that includes characters the recorder cannot edit.
, Editing titles cannot be done if the title includes characters that cannot
be input on the recorder.
CANNOT
OPERATE
• You tried to press X or T MARK during synchro-recording.
CANNOT
• There is no audio data that can be played on the recorder.
RECORD OR • The audio data or disc management file has been damaged.
PLAY
CANNOT SET • You tried to make the Time Mark setting during synchro-recording.
• You selected “RECVolume” while the recorder is not in recording-pause.
, Set “RECVolume” while the recorder is in recording-pause.
• You tried to make the following settings while recording.
— Disc Memory
— Play mode
— Recording mode
— Recording level
— Selection of “
:REC” in menu
CHARGE
5° C–35° C
41F–95F
• You tried to charge the rechargeable battery at a place with a temperature
outside the specified range for the recorder.
, Charge the battery at a temperature of +5° C (+41° F) to +35° C
(+95° F).
Charging
• The rechargeable battery is being charged.
DATA SAVE
• The recorder is writing information to the system file, such as the recorded
data or editing information.
, Wait until the message disappears from the display.
Download from Www.Somanuals.com. All Manuals Search And Download.
76
Message
Meaning/Remedy
DC IN TOO
HIGH
• Voltage of the power supply is too high (The supplied AC power adaptor or
the recommended car battery cord is not used).
, Use the supplied AC power adaptor or the recommended car battery
cord.
DISC FULL
D-L READY
• Recording may not be done if the remaining recordable time on the disc is
48 seconds or less.
, Replace the disc.
• MD Simple Burner is now ready to record an audio CD to the disc in the
EJECT DISC
OK
• The recorder has finished communicating with the computer and it is safe to
eject the disc from the recorder or disconnect the dedicated USB cable.
End
• The recorder reached to the end of the disc while playing or pressing >.
ERROR
• There is an internal malfunction in the system.
ERROR XX
• There is an internal malfunction in the system.
appears again, please consult your nearest Sony dealer.
FORMAT
• A disc with a format that the recorder does not support was inserted.
ERROR DISC • A disc formatted on the computer was inserted.
, Insert a standard MD or a disc used in Hi-MD mode.
, When formatting a disc on the computer, make sure to use the
SonicStage software.
GROUP FULL • You tried to create a 256th group on a disc used in Hi-MD mode or 100th
group on a standard disc.
, You can create only up to 255 groups (on a disc used in Hi-MD mode)
or 99 groups (on a standard disc) on a disc. Keep the group number
within 255 or 99.
HOLD
• The recorder is locked.
IN MENU
• You pressed a key on the remote control while selecting a menu on the
recorder.
LOW
BATTERY
• A battery is weak.
MEMORY
OVER
• You tried to record with the recorder placed where it receives continuous
vibration.
, Put the recorder on a stable place, and start recording again.
NAVI
• You pressed a key on the remote control while selecting the Main play
mode on the recorder.
NO BATTERY • Recharging was attempted with a non-rechargeable battery inserted.
, Insert a rechargeable battery and start the charging process again.
NO
• You selected bookmark play without setting bookmarks.
BOOKMARK
TRACK
Download from Www.Somanuals.com. All Manuals Search And Download.
77
Message
Meaning/Remedy
NO DIGITAL • You tried to make a copy from a disc that is protected by the Serial Copy
COPY
Management System. You cannot make copies from a digitally connected
source which was itself recorded using digital connection.
NO DISC
• You tried to play or record with no disc in the recorder.
, Insert a disc.
NO DISC
MEMORY
• You tried to erase a setting in the Disc Memory on a disc that contains no
settings in the Disc Memory (page 57).
NO GROUP
• You tried to release a group setting with a disc that has no groups.
, Insert a disc with group settings.
• You selected “
: Erase” with a disc without group setting.
, You cannot erase groups with a disc with no groups.
NO INPUT
SIGNAL
• The recorder could not detect digital input signals.
NO NAME
• You tried to select “Artist” in the Main play mode with a disc that has no
artist name information.
• You tried to select “by Artist” in the Search function with a disc that has no
artist name information.
NON
GROUPED
TRACK
• You selected “
: Move” or “
: Erase”, or you tried to label a group
while the recorder is stopped or while playing a track that does not belong
to a group.
, Select a track within a group you want to edit, and then do the editing
operation again.
NotENOUGH • You tried to edit the contents of a 1GB Hi-MD disc with insufficient battery
POWER TO
EDIT
power for editing (page 72).
, Connect the AC power adaptor to the recorder or insert a fully charged
rechargeable battery or a new alkaline dry battery.
NotENOUGH • You tried to record on a 1GB Hi-MD disc with insufficient battery power
POWER TO
REC
for recording (page 69).
, Connect the AC power adaptor to the recorder or insert a fully charged
rechargeable battery or a new alkaline dry battery.
NO TITLE
• You tried to select “Album” in the Main play mode with a disc that has no
album name information.
• You tried to select “by Album” in the Search function with a disc that has
no album name information.
NO TRACK
• You tried to play a disc with no recorded tracks.
, Insert a recorded disc.
NO TRACK IS • You selected “
: Move” or “
: Erase”, or you tried to label a track
SELECTED
without first selecting a track.
, Do the editing operation again after selecting the desired track first.
P/B ONLY
DISC
• You tried to record or edit on a premastered disc (P/B stands for
“playback”).
, Insert a recordable disc.
PC – –MD
• The recorder is connected to the computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
78
Message
Meaning/Remedy
PROTECTED • You tried to record or edit on a disc with the tab in the record-protect
DISC
position.
PUSH STOP
BUTTON
• You tried to open the lid by sliding the OPEN switch while the recorder was
storing disc information with the dedicated USB cable connecting the
recorder to a computer.
, Operation must be done only after pressing x and “SYSTEM FILE
WRITING” has disappeared from the display.
READ
ERROR
• The recorder cannot read the disc information correctly.
, Reinsert the disc.
REC ERROR • Recording was not correctly done.
, Place the recorder at a place with no vibrations and record again.
• The disc is soiled with an oil film or finger prints, is scratched, or is not a
standard disc.
, Try recording again with another disc.
SYSTEM
FILE
WRITING
• The recorder is storing information (track start and end position) from the
memory to the disk.
, Wait until this process is completed. Do not expose the player to
physical shock, nor disrupt power supply.
TEMP OVER • Heat has built up in the recorder.
REC STOP , Let the recorder cool down.
TITLE FULL • You tried to enter more than 200 letters to label a single track, group, or
disc.
• You tried to enter a total of more than approximately 55,000 letters (in Hi-
MD mode) or 1,700 letters (in MD mode) for titles.
TOC DATA
ERROR
• The recorder cannot read the disc information correctly.
, Insert another disc.
TRACK FULL • You tried to record more than 2,047 tracks on a disc in Hi-MD mode or
more than 254 tracks on a disc in MD mode.
TrkFromPC
NO EDIT
• You tried to combine or divide tracks that were transferred from the
computer.
, You cannot combine or divide transferred tracks.
• You tried to combine or divide tracks that were recorded in Hi-MD mode
using the MD Simple Burner software.
, You cannot combine or divide tracks recorded in Hi-MD mode with the
MD Simple Burner software.
TrkFromPC
NO REC
• You tried to record in the middle of a protected track that has been
transferred from the computer.
• You tried to record in the middle of a track that was recorded in Hi-MD
mode with the MD Simple Burner software.
, You cannot record new material in the middle of a protected track or a
track that was recorded in Hi-MD mode with the MD Simple Burner
software.
Download from Www.Somanuals.com. All Manuals Search And Download.
79
Explanations
About Hi-MD
“Hi-MD” is a new MiniDisc format.
Incorporating the new ATRAC3plus audio compression technology, Hi-MD is a new recording format
that delivers longer recording times than ordinary MDs. Hi-MD discs can also be used as a computer
storage medium for non-audio data such as text and images.
For more details on Hi-MD, refer to the supplied flyer “What you can do with the Hi-MD Walkman”.
About ATRAC3plus
ATRAC3plus is an enhanced version of ATRAC3.
Compared to ATRAC3 (used in LP2 and LP4 mode of the recorder), which attains a compression ratio
10 times higher than that of a CD, ATRAC3plus (used in Hi-SP and Hi-LP mode of the recorder)
achieves a higher compression ratio that is 20 times higher than that of a CD, but with no loss in sound
quality.
“Hi-MD mode” and “MD mode”
This recorder has two operation modes, “Hi-MD mode” and “MD mode” that are automatically
recognized whenever a disc is inserted. If you insert a blank disc, the recorder allows you to specify
either of these operation modes for disc recording (except in the case of Hi-MD discs that support Hi-
MD mode only). When using a blank disc, set the “Disc Mode” setting to select either “Hi-MD” or
“MD”.
About Linear PCM
Linear PCM is a digital, non-compressed audio coding system. You can enjoy high-quality sound equal
to that of CDs by recording in this mode.
The meaning of “no sound”
“No sound” describes a recorder condition in which the input level is about 4.8 mV during analog input
or less than –89 dB during optical (digital) input (with 0 dB as full bit (the maximum recordable level
for a MiniDisc)).
About “System File”
The system file is space on the disc that is used to store information other than audio files; for instance,
track numbers.
If the MiniDisc were a book, the system file would correspond with the index or table of contents.
The recorder rewrites the system file whenever an operation such as recording, adding or deleting track
marks, or moving tracks has been done. (“SYSTEM FILE WRITING” appears in the display when the
recorder is rewriting the system file.) While the recorder is writing disc information, make sure not to
move or jog the recorder or disconnect the power source as this may cause the information to be
incorrectly recorded or the disc contents to be lost.
Download from Www.Somanuals.com. All Manuals Search And Download.
80
List of the recording time for each disc
When using a disc in Hi-MD mode
When recording on the
recorder
Recording time1)
Recording
mode on
the recorder
Codec/
Bit rate
1GB Hi-MD 80-minute 74-minute 60-minute
disc
standard
disc
standard
disc
standard
disc
PCM
Linear PCM/
1.4Mbps
1 hour and 34 28 minutes
minutes
26 minutes
21 minutes
Hi-SP
Hi-LP
ATRAC3plus/ 7 hours and
256kbps 55 minutes
2 hours and
20 minutes
2 hours and 1 hour and 45
10 minutes minutes
ATRAC3plus/ 34 hours
64kbps
10 hours and 9 hours and 7 hours and
10 minutes 25 minutes 40 minutes
When transferring from
the computer
Codec/Bit rate
1GB Hi-MD 80-minute 74-minute 60-minute
disc
standard
disc
standard
disc
standard
disc
Linear PCM/1.4Mbps
ATRAC3plus/256kbps
ATRAC3plus/64kbps
ATRAC3plus/ 48 kbps
ATRAC3/132kbps
1 hour and 34 28 minutes
minutes
26 minutes
21 minutes
7 hours and
55 minutes
2 hours and
20 minutes
2 hours and 1 hour and 45
10 minutes minutes
34 hours
10 hours and 9 hours and 7 hours and
10 minutes 25 minutes 40 minutes
45 hours
13 hours and 12 hours and 10 hours and
30 minutes 30 minutes 10 minutes
16 hours and 4 hours and 4 hours and 3 hours and
30 minutes 50 minutes 30 minutes 40 minutes
20 hours and 6 hours and 5 hours and 4 hours and
50 minutes 10 minutes
32 hours and 9 hours and
50 minutes 50 minutes
ATRAC3/105kbps
40 minutes
9 hours
40 minutes
ATRAC3/66kbps
7 hours and
20 minutes
1) Approximate time
2) When transferring 5-minute tracks
Download from Www.Somanuals.com. All Manuals Search And Download.
81
When using a disc in MD mode
When recording on the recorder
Recording time1)
74-minute 60-minute
Recording
mode on the
recorder
Codec/
Bit rate
80-minute
standard disc standard disc standard disc
SP
ATRAC/292kbps 80 minutes 74 minutes 60 minutes
LP2
ATRAC3/
132kbps
2 hours and 40
minutes
2 hours and 28 2 hours
minutes
LP4
ATRAC3/66kbps 5 hours and 20
minutes
4 hours and 56 4 hours
minutes
MONO
(monaural)
Monaural
2 hours and 40
minutes
2 hours and 28 2 hours
minutes
When transferring from the
computer
Codec/Bit rate
ATRAC3/132kbps
ATRAC3/105kbps
ATRAC3/66kbps
80-minute
74-minute
60-minute
standard disc standard disc standard disc
2 hours and 40
minutes
2 hours and 28 2 hours
minutes
2 hours and 40
minutes
2 hours and 28 2 hours
minutes
5 hours and 20
minutes
4 hours and 56 4 hours
minutes
1) Approximate time
2) When transferring 5-minute tracks
Download from Www.Somanuals.com. All Manuals Search And Download.
82
Note on digital recording
This recorder uses the Serial Copy Management System, which allows only first-generation digital
copies to be made from premastered software. You can only make copies from a home-recorded disc by
using the analog (line out) connections.
Premastered software such as CDs or MDs.
Microphone, record player, tuner, etc. (with
analog output jacks).
Analog recording
Digital recording
Home-recorded disc
Digital recording
Home-
recorded
disc
No
digital
recording
Recordable
disc
No
digital
recording
Recordable
disc
Recordable
disc
Restrictions on the editing of tracks transferred from your
computer
This unit was designed so that editing functions (i.e., adding track marks and erasing track
marks) do not function for tracks that have been transferred from your computer. This is to
prevent the loss of transfer authorization by the transferred tracks. To edit these tracks, first
transfer them into the computer, and then edit them on the computer.
About the DSP TYPE-S for ATRAC/ATRAC3
This recorder supports DSP TYPE-S, a specification for high-level Sony MiniDisc decks
equipped with digital signal processors (DSP). This specification allows the recorder to produce
high-quality sound from tracks recorded in MDLP mode. Since it retains DSP TYPE-R support,
the recorder produces superior results during recording or playback in SP (normal stereo) mode.
Suppressing the skips of the sound (G-PROTECTION)
The G-PROTECTION function was developed to provide a higher level of shock resistance than
that of existing players.
Download from Www.Somanuals.com. All Manuals Search And Download.
83
Difference between digital (optical) and analog (line) inputs
The input jack of this recorder works as both digital and analog input jacks. Connect the
recorder to a CD player or a cassette recorder using either digital (optical) input or analog
record using analog (line) input.
Difference Digital (optical) input
Analog (line) input
Connectable Equipment with a digital (optical) output Equipment with an analog (line)
source
jack (CD player, DVD player, etc.)
output jack (Casette deck, radio,
record player, etc.)
Usable cord
Optical cable (with an optical or an
optical-mini plug) (page 18)
Line cable (with 2 phono plugs or a
stereo-mini plug) (page 31)
Signal from
the source
Digital
Analog
Even when a digital source (such as
a CD) is connected, the signal sent
to the recorder is analog.
Track marks1) Marked (copied) automatically
• at the same positions as the source
(when the sound source is a CD or an
MD).
Marked automatically
• after more than 2 seconds of no
segment.
• when the recorder is paused while
recording.
• after more than 2 seconds of no sound
(page 80) or low-level segment (with a
sound source other than a CD or an
MD).
• when the recorder is paused (3 seconds
of no sound is encountered while
synchro-recording)
Recorded
sound level
Same as the source.
Adjusted automatically. Can also
Can also be adjusted manually (Digital
Note
Track marks may be copied incorrectly:
• when you record from some CD players or multi disc players using digital (optical) input.
• when the source is in shuffle or program play mode while recording using digital (optical) input. In
this case, play the source in normal play mode.
• when programs with audio that is digitally broadcast (e.g., digital TV) are recorded through the digital
(optical) input.
Download from Www.Somanuals.com. All Manuals Search And Download.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
85
What you can do with MD Simple
Burner/SonicStage
What you can do with MD Simple Burner
MD Simple Burner allows you to record music tracks from an audio CD in the CD drive of
your computer to an MD Walkman, without first recording the music tracks to the
computer.
MD Walkman
Audio CD
What you can do with SonicStage
SonicStage allows you to import audio data to your computer from music sources such as
audio CDs and the Internet, and then transfer the audio data stored in your computer to an
MD.
MD Walkman
Audio CD
Transfer
Import
Music files in the
MP3,WAV formats
Internet
Download from Www.Somanuals.com. All Manuals Search And Download.
86
Basic operational flow using an MD Walkman
SonicStage
MD Simple Burner
Providing the required system environment (page 88)
Installing the software onto your computer (page 89)
Connecting an MD
walkman to your
computer (see “Recorder
Importing audio data to
Connecting an MD
walkman to your
computer (see “Recorder
Recording music tracks
from an audio CD in the
CD drive of your
Transferring audio data
from your computer
Listening to an MD
Download from Www.Somanuals.com. All Manuals Search And Download.
87
Installing
Providing the required system environment
System requirements
The following system environment is required in order to use the SonicStage/MD Simple
Burner software for the MD Walkman.
Computer
IBM PC/AT or Compatible
• CPU: Pentium II 400 MHz or higher (Pentium III 450 MHz or higher
is recommended.)
• Hard disk drive space: 200 MB or more (1.5 GB or more is
recommended) (The amount space will vary according to Windows
version and the number of music files stored on the hard disk.)
• RAM: 64 MB or more (128 MB or more is recommended)
Others
• CD drive (capable of digital playback by WDM)
• Sound Board
• USB port (supports USB (previously USB 1.1))
Operating
System
Factory installed:
Windows XP Media Center Edition 2004/Windows XP Media Center
Edition/Windows XP Professional/Windows XP Home Edition/
Windows 2000 Professional/Windows Millennium Edition/Windows
98 Second Edition
Display
Others
High Color (16bit) or higher, 800 × 600 dots or better (1024× 768 dots
or better is recommended)
• Internet access: for Web registration, EMD services and CDDB
• Windows Media Player (version 7.0 or higher) installed for playing
WMA files
This software is not supported by the following environments:
• OSs other than the indicated above
• Personally constructed PCs or operating systems
• An environment that is an upgrade of the original manufacturer-installed operating system
• Multi-boot environment
• Multi-monitor environment
• Macintosh
Notes
• We do not ensure trouble-free operation on all computers that satisfy the system requirements.
• The NTFS format of Windows XP/Windows 2000 Professional can be used only with the standard
(factory) settings.
• We do not ensure trouble-free operation of the system suspend, sleep, or hibernation function on all
computers.
• For Windows 2000 Professional users, install Service Pack 3 or later version before using the
software.
Download from Www.Somanuals.com. All Manuals Search And Download.
88
Installing the software onto your computer
Before installing the software
• Make sure to close any virus-check software, as such software usually demands a large
amount of system resources.
• When you use the MD Walkman, make sure to install the software with the supplied CD-
ROM.
— If OpenMG Jukebox, SonicStage or Net MD Simple Burner is installed already, the
previous software will be overwritten by the new version. The new version retains the
functions of the older version, but with new functions added.
— If SonicStage Premium or SonicStage Simple Burner is installed already, the previous
software will co-exist with the new version.
— You will still be able to use music data registered by an older software version even
after SonicStage has been installed. As a precaution, we recommend that you back up
your music data. To back up the data, refer to [Backing Up My Library] – [Backing
Up Data to a Disk] on SonicStage Help.
• If the MD Walkman is connected to the computer with the USB cable, make sure to
disconnect the USB cable first before installing the software.
1 Turn on your computer and start up Windows.
2 Insert the supplied CD-ROM into the CD drive of your computer.
The setup program starts up automatically and the installation window appears.
Depending on the region, a window may appear asking you to select your country. In
this case, follow the displayed instructions.
continued
Download from Www.Somanuals.com. All Manuals Search And Download.
89
3 Click [Install SonicStage and MD Simple Burner] and then follow the
displayed instructions.
Click [Install SonicStage and MD Simple
Burner]
Read the instructions carefully.
Depending on your region, the buttons other than [Install SonicStage and MD Simple
Burner] may differ from those in the illustration above.
The installation may take 20 to 30 minutes, depending on your system environment.
Make sure to restart your computer only after the installation is completed.
Was the installation successful?
If any trouble occurs during the installation, see “Troubleshooting” (page 108).
Download from Www.Somanuals.com. All Manuals Search And Download.
90
Using MD Simple Burner
Before using MD Simple Burner
MD Simple Burner allows you to record music tracks from an audio CD in the CD drive of
your computer to the MD Walkman.
There are two ways to record from
an audio CD.
• Simple mode (page 92)
You can use MD Walkman operations to record
an entire CD or only the first track without
launching MD Simple Burner.
You can launch MD Simple Burner to record
using computer operations. Record an entire CD
or selected tracks.
Notes
• Only audio CDs with a
mark can be used with MD Simple Burner.
• We do not guarantee normal operation in the case of the copy-controlled CDs.
• You cannot record in simple mode while the MD Simple Burner in standard mode or OpenMG
software (SonicStage, OpenMG Jukebox, etc.) is active.
Download from Www.Somanuals.com. All Manuals Search And Download.
91
Recording using MD Walkman operations (Simple mode)
1 Insert a recordable disc into the MD Walkman and then connect the MD
Walkman to the computer.
For details about connections, see the “Recorder Operation” section.
Do not disconnect the power source or the dedicated USB cable before the transfer has
completed.
2 Insert the audio CD that you want to record into the CD drive of your
computer.
The CDDB registration window appears when you use the CDDB for the first time.
You need to connect the computer to the Internet in order to use the CDDB.
3 Press and hold T MARK/REC and press NENT on the MD Walkman.
The recording starts.
All tracks on the CD are recorded as a new group.
To stop recording
Click
on the computer display.
While the first track is being recorded, you can use x (stop) button to stop on the MD
Walkman.
Setting the recording mode
Before starting recording, right-click the
then select in [recording mode].
MD Simple Burner icon in the task tray, and
Recording first track only
Before starting recording, right-click the
MD Simple Burner icon in the task tray, and
then select [Recording settings] – [Record 1st Track Only].
Setting when the CDDB has more than one item of information
Right-click the
MD Simple Burner icon in the task tray, and then select the setting by
clicking [CDDB(r)] – [Multiple Matches].
— [User Selection]: A selection window is displayed
— [No Resolve]: No CD information is downloaded
— [First Choice]: The first item is downloaded
Download from Www.Somanuals.com. All Manuals Search And Download.
92
Recording by computer operations (Standard mode)
To start MD Simple Burner, click [Start] – [All Programs]* – [MD Simple Burner] – [MD
Simple Burner].
∗ [Programs] in the case of Windows 2000 Professional/Windows Millennium Edition/Windows 98
Second Edition
z
There are other ways to start up MD Simple Burner as follows:
• Double-click the
Standard Mode].
• Double-click the
MD Simple Burner icon in the task tray, or right-click and select [Show
MD Simple Burner shortcut icon on the desktop.
The window for recording all tracks on the CD
[REC/STOP]
To start recording all tracks on the CD as
a new group, click here.
To stop recording, click [Stop].
Total time of the
selected tracks of CD
CD icon
Disc name (MD)
MD icon
Remaining
recording time of
the inserted MD
Album name (CD)
[OPEN]
Artist name (CD)
To open the display
as shown on page
94, click here.
Recording mode drop down menu
Download from Www.Somanuals.com. All Manuals Search And Download.
93
The window for recording selected tracks from an audio CD
[CONFIG]
Click here to do the following:
-Set the CD-ROM drive
Track information
(CD)
-View version information for MD Simple Burner
-Confirm CD information registered in the CDDB
Total time of the
selected tracks of CD
Track information (MD)
Artist name
You can change the
track name and track
number
[REC/
STOP]
Disc name
(MD)
Album Title
[Get CD info]
[New Group]
Information of an audio CD
(album name, track title,
etc.) will be reflected in the
track list.
Recording mode
drop down menu
[CLOSE]
To close the display as shown
CD operating section
Use these controls to confirm the tracks on audio CD to
be recorded
[Erase]
[All Erase]
Remaining time of the inserted MD
To deselect all tracks, click here.
To select all tracks, click here.
Check boxes
Check the box of the tracks
that you want to record
Download from Www.Somanuals.com. All Manuals Search And Download.
94
Using SonicStage
Importing audio data
This section explains how to record and store audio data from an audio CD to My Library
of SonicStage on the hard disk drive of your computer.
You can record or import music from other sources such as the Internet and your
computer’s hard disk. Refer to SonicStage Help for details.
Notes
• Only audio CDs with a
mark can be used with SonicStage.
• We do not guarantee normal operation in the case of the copy-controlled CDs.
Source indication
[Music Source]
[CD Info]
[Format/Bit Rate]
1 Start up SonicStage.
Select [Start] – [All Programs]*– [SonicStage] – [SonicStage].
∗[Programs] in the case of Windows 2000 Professional/Windows Millennium Edition/Windows 98
Second Edition
SonicStage starts up and the main window appears.
z
You can also start SonicStage with double click
([SonicStage] icon) on the desktop.
2 Insert the audio CD that you want to record into the CD drive of your
computer.
The source indication in the top-left of the display changes to [Record a CD].
3 Click [Music Source].
The contents of the audio CD appear in the music source list (on the left side of the
screen).
continued
Download from Www.Somanuals.com. All Manuals Search And Download.
95
4 If necessary, click
to uncheck tracks you do not want to record.
If you unchecked a box by mistake, click it again to restore the check.
To check all boxes, click
To uncheck all boxes, click
.
.
5 If necessary, change the format and bit rate for audio CD recording.
When you click [Format/Bit Rate] on the right side of the screen, “CD Recording
Format [My library]” dialog box will appear. The dialog box will ask you to select the
format and bit rate for recording the audio CD.
6 Click
.
To stop recording
Click
.
z
If CD information such as album title, artist name, and track names could not be obtained
automatically, click [CD Info] on the right side of the screen. When you do this, your computer must be
connected to the Internet.
Download from Www.Somanuals.com. All Manuals Search And Download.
96
Transferring audio data from your computer to the
MD Walkman
Audio data stored in My Library of SonicStage can be transferred to your MD Walkman an
infinite number of times.
Transfer Destination list
[Transfer]
The My Library
list
[Transfer Mode]
1 Connect your MD Walkman to the computer.
After making the connections, “Hi-MD” or “Net MD” is displayed in the Transfer
Destination list in the upper right of the screen.
For details about connections, see “Recorder Operation”.
Do not disconnect the power source or the dedicated USB cable before the transfer has
completed.
2 Select the transfer destination and click [Transfer] on the right side of the
screen.
The screen is switched to the Transfer (Hi-MD or Net MD) screen.
3 Click the tracks you want to transfer in the My Library list on the left side of
the screen.
To transfer more than one track, hold down the [Ctrl] key while selecting the tracks.
To transfer all tracks of the album, click the album.
continued
Download from Www.Somanuals.com. All Manuals Search And Download.
97
4 If necessary, change the transfer mode.
As the default setting, tracks in the OpenMG (LPCM/ATRAC3/ATRAC3plus) format
will be transferred in the same format and bit rate (normal transfer).
If the device connected to the computer does not support the above format, the format
and bit rate will be converted to those of the device. In some case, this process may
take time.
If you want to change the format and bit rate, click [Transfer Mode] in the center of the
screen to display “Transfer Mode Settings” dialog box.
5 Click
.
To stop transferring
Click
.
When transferring to a Hi-MD Walkman
If you want to play the transferred tracks on a Net MD Walkman that does not support Hi-
MD, select [Net MD] for the mode (operation mode) on the right side of the screen after
mode for recording.
Notes
• A transfer will fail and an error message will appear in the following cases:
—When there is no enough free space on the disc.
—When the track is subject to playback restrictions.
• During the transfer, the system suspend, sleep, or hibernation function will not operate.
• Depending on the type of the text and number of characters, the text entered by SonicStage may not be
displayed on the connected MD Walkman. This is due to the limitations of the connected MD
Walkman.
Download from Www.Somanuals.com. All Manuals Search And Download.
98
Transferring back audio data from the MD Walkman
to your computer
Transfer
Destination list
[Transfer]
The My Library list
List of tracks on
the MD
Transferring from the MD Walkman back to your computer
Audio data that has been transferred from your computer and stored on the MD can be
transferred back to My Library of SonicStage on your computer.
1 Connect your MD Walkman to the computer.
For details about connections, see “Recorder Operation”.
Do not disconnect the power source or the dedicated USB cable before the transfer has
completed.
2 Select the transfer destination and click [Transfer] on the right side of the
screen.
The screen is switched to the Transfer (Net MD) screen.
3 In the Net MD list on the right side of the screen, click to select the tracks you
want to transfer to your computer.
4 Click
in the middle of the screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
99
To stop transferring
Click
.
Note
Tracks transferred to the MD Walkman from another computer cannot be transferred back to My
Library on your computer.
Importing tracks recorded on a Hi-MD Walkman* to your
computer
Tracks that have been recorded on a Hi-MD Walkman* can be imported to My Library of
SonicStage on your computer only once.
∗ Only tracks recorded in Hi-MD mode
1 Insert recordable disc into the Hi-MD Walkman and connect the device to your
computer.
“Hi-MD” is displayed in the Transfer Destination list in the upper right of the screen.
2 Click [Transfer].
3 Click the tracks you want to transfer in the Hi-MD list on the right side of the
screen.
To transfer more than one track, hold down the [Ctrl] key while selecting the tracks.
To transfer all tracks of the group, click the group.
4 Click
in the middle of the screen.
The “Import” dialog box appears.
5 Specify the transfer destination in the dialog box.
To import tracks to a new album, select “Import to a new album” and enter the desired
album name in the text box.
To add the tracks to an existing album in My Library, select “Import to an existing
album” and click “Browse” to select the album.
6 Click “OK”.
Download from Www.Somanuals.com. All Manuals Search And Download.
100
To stop importing
Click
.
Note
Notes
• You cannot import tracks that were recorded in a Net MD mode to your computer, or tracks that have
been recorded on a device that does not support Hi-MD mode.
• Before importing tracks recorded on the Hi-MD Walkman to the computer, click [Properties] on the
right side of the screen to confirm the status of the [Import Settings] check box (it is checked by
default). Then do as follows:
—To import tracks to My Library while deleting them on the Hi-MD Walkman, uncheck the box.
—To edit imported tracks in SonicStage, uncheck the box.
—To import tracks to My Library while leaving the copy of them on the Hi-MD Walkman, check the
box.
• When you transfer tracks recorded in linear PCM on the Hi-MD Walkman to a computer for editing
(dividing or combining) in My Library, the editing may take a long time, depending on the length of
the tracks and capabilities of your computer. This is due to limitations in the MiniDisc system. If you
want to edit long tracks recorded in linear PCM, we recommend that you do the editing on the Hi-MD
Walkman first, and then transfer the edited data to a computer afterwards.
Download from Www.Somanuals.com. All Manuals Search And Download.
101
Using SonicStage Help
SonicStage Help provides further details on how to use SonicStage. SonicStage Help
allows you to search easily for information from a list of operations, such as “Importing
audio data” or “Transferring audio data”, or from large list of keywords, or by typing in
words that might lead you to the appropriate explanations.
To display SonicStage Help
Click [Help] – [SonicStage Help] while SonicStage is running.
[SonicStage Help]
z
You can display SonicStage Help by selecting the following:
[Start] – [All Programs]*– [SonicStage] – [SonicStage Help].
∗ [Programs] in the case of Windows 2000 Professional/Windows Millennium Edition/Windows 98
Second Edition
Notes
• In SonicStage Help, “Device/Media” is the general term for the external device such as the MD
Walkman, the Network Walkman, and the CD Walkman.
• Follow the instructions of your internet provider regarding such things as recommended system
environment when using EMD services.
Download from Www.Somanuals.com. All Manuals Search And Download.
102
Understanding SonicStage Help
The right side frame
The left side frame
1 Double click [Overview] in the left-side frame.
2 Click [About This Help File].
The explanation will appear in the right-side frame.
3 Read the text.
Scroll the display if necessary.
Click underlined words to jump to their explanations.
Searching for a word inside an explanation
[Search]
“Type in the keyword
to find” text box
List Topics
An explanations of the
selected item
The list of the words
that you searched
[Display]
1 Click [Search] to open the “Search” window.
2 Type in the words.
3 Click [List Topics].
A list of the words that were searched is displayed.
4 Click to select the desired item among those displayed.
5 Click [Display].
An explanation of the selected item is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
103
Referring to SonicStage Help
Click [Contents] on the left side of the Help window to view a list of items for each
operation. Click on any items for details.
Importing audio data to the computer
To
SonicStage Help
Import audio data from the
Internet
[Importing tracks] – [Purchasing Tracks from a Music
Service Site]
Import audio files on the
computer in SonicStage
[Importing tracks] – [Importing Music Files]
Listening to audio data on the computer
To
SonicStage Help
Listen to audio data from the
CD drive or My Library
[Music Playback] – [Playing Back an Audio CD] or
[Playing Back a Track in My Library]
Listen to audio data on the MD [Music Playback] – [Playing Back a Track on a Device/
Walkman connected to the
computer
Media]
Managing and editing imported tracks
To
SonicStage Help
Change information related to [Changing SonicStage Settings] – [Changing Settings
CD information downloading
for Getting CD information]
Edit an album
Delete the tracks
[Managing Tracks and Albums] – [Creating/Editing
Albums]
Change the destination directly [Changing SonicStage Settings] – [Changing the
for track storage Location for Saving Recorded Files]
Download from Www.Somanuals.com. All Manuals Search And Download.
104
Backing up audio data
We recommend that you back up your music data as a precaution against hard disk crashes
or computer replacement.
To
SonicStage Help
Back up audio data in My
Library
[Backing Up My Library] – [Backing Up Data to a
Disk]
Look up about SonicStage
backup
[Backing Up My Library] – [FAQ-About SonicStage
Backup Tool]
Troubleshooting
To
SonicStage Help
Look up troubleshooting
procedure
[Additional Information] – [Troubleshooting]
When you want to know
To
SonicStage Help
Look up unknown words
[Additional Information] – [Glossary]
Look up the kinds of audio data [Overview] – [Content Handled Within SonicStage]
that can be managed by
SonicStage
Look up the kinds of functions [Overview] – [Features]
that can be used with
SonicStage
Download from Www.Somanuals.com. All Manuals Search And Download.
105
Other information
Uninstalling SonicStage/MD Simple Burner
To uninstall SonicStage/MD Simple Burner, follow the procedures below.
1 Click [Start]–[Control Panel]*.
∗ [Settings]–[Control Panel] in the case of Windows 2000 Professional/Windows Millennium
Edition/Windows 98 Second Edition
2 Double-click [Add/Remove Programs].
3 Click [SonicStage 2.x.xx] or [MD Simple Burner 2.0.xx] in the “Currently
Installed Programs” list, and then click [Change and Remove]*.
Follow the displayed instruction and restart your computer. The uninstallation is
completed when the computer has restarted.
∗ [Change/Remove] in the case of Windows 2000 Professional, [Add/Remove] in the case of
Windows Millennium Edition/Windows 98 Second Edition
Note
When you install SonicStage Ver. 2.x/MD Simple Burner Ver. 2.0, OpenMG Secure Module x.x is
installed at the same time. Do not delete OpenMG Secure Module x.x since it may be used by other
software.
Download from Www.Somanuals.com. All Manuals Search And Download.
106
On copyright protection
The OpenMG technology allows you to enjoy digital music, while maintaining the
copyrights of its holders. SonicStage encrypts audio files in OpenMG format and stores
them on the hard disk of your computer to prevent unauthorized distribution.
Restrictions on audio content
High-quality digital audio content is widely available through music distribution services
on the Internet. To protect the copyrights of its holders from unauthorized distribution,
some audio content is distributed with certain restrictions on recording and playback. For
example, the playback period or playback count for the data may be limited.
Download from Www.Somanuals.com. All Manuals Search And Download.
107
Troubleshooting
Please refer to the following steps if you encounter a problem while using SonicStage/MD
Simple Burner.
2 Check the symptoms in SonicStage Help when you use SonicStage.
3 If the problem cannot be solved after checking the above references.
Check the following table and then consult your nearest Sony dealer.
Computer
• Manufacturer:
• Model:
• Type: Desktop type / Laptop type
Name of operating system:
RAM capacity:
Hard disk drive (containing SonicStage/MD Simple Burner and audio data)
• Capacity of the drive:
• Free space:
Version of the software
• SonicStage Ver. 2.x1)
• MD Simple Burner Ver. 2.02)
Error Message (if one appear):
If an externally connected CD-ROM drive is used
• Manufacturer:
• Model:
• Type: CD-ROM / CD-R/RW / DVD-ROM / Other (
)
• Type of connection to the computer: PC card / USB / IEEE1394 / Other (
)
If another device with USB connection is used
• Name of the device (or devices):
1)
To check the SonicStage software version, go to [Help] – [About SonicStage] in the SonicStage
window.
To check the MD Simple Burner software version, go to [CONFIG] – [Version] in the MD Simple
Burner window.
2)
Download from Www.Somanuals.com. All Manuals Search And Download.
108
The software cannot be installed onto your computer
Problem
Cause/Remedy
The installation was not
successful.
You are using an OS that does not support this software.
All windows applications are not closed.
tIf you start the installation while other programs are
running, a malfunction may occur. This is especially
true for programs that require large amounts of
system resources, such as virus-check software.
There is not enough hard disk space on your hard disk.
tYou need 200MB or more free space on your hard
disk.
The installation appears to have Check for the appearance of an error message beneath
stopped before it has
completed.
the installation window.
t Press the [Tab] key while holding down the [Alt]
key. If an error message has appeared, press the
[Enter] key. The installation will resume. If there is
no message, the installation is still in progress. Wait
a little while longer.
The progress bar on the display The installation is progressing normally. Please wait.
is not moving. The access lamp The installation may take 30 minutes or more,
has not lit for a few minutes.
depending on your CD drive or system environment.
Download from Www.Somanuals.com. All Manuals Search And Download.
109
Using a MD Walkman connected to the computer
Problem
Cause/Remedy
Your computer does not
recognize the MD Walkman.
The MD Walkman is not firmly connected with the
supplied dedicated USB cable to the computer.
tReconnect the MD Walkman to the computer firmly.
tRemove and reconnect the MD Walkman. If the
computer still does not recognize the MD Walkman,
disconnect the cable, restart the computer, and then
make the connection again.
A disc is not inserted in the MD Walkman.
tCheck if a disc is inserted in the MD Walkman.
The Net MD driver is not be installed.
tInstall the SonicStage/MD Simple Burner software
using the supplied CD-ROM.
The software installation failed.
tDisconnect the connected device and install the
software again using the supplied CD-ROM.
The supplied dedicated USB cable is disconnected.
tConnect the supplied dedicated USB cable firmly.
The connections are made through a USB hub.
tOperations are not guaranteed for USB-hub
connections. Connect the MD Walkman directly to
the USB connector on the computer.
Even though the dedicated
USB cable is used to connect
the MD Walkman to the
computer, the display on the
MD Walkman does not indicate
it is connected.
It takes time to recognize SonicStage. Please wait.
The other application software is running.
tReconnect the supplied dedicated USB cable after a
while. If the computer still does not recognize the
MD Walkman, disconnect the MD Walkman, restart
the computer, and connect the dedicated USB cable
again.
Even though your computer
recognize the MD Walkman, it
does not operate normally.
The supplied dedicated USB cable is disconnected.
tConnect the supplied dedicated USB cable firmly.
The connections are made through a USB hub.
tOperations are not guaranteed for USB-hub
connections. Connect the MD Walkman directly to
the USB connector on the computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
110
Index
Numerics
6-Band Equalizer 42
A
E
EMD service 88
Erasing
a whole disc 52
groups 52
tracks 51
Accessories
optional 67
supplied 10
F
ATRAC3plus 80
Format 55
AVLS 56
G
B
G-PROTECTION 83
Group
Battery
battery life 16
dry battery 16
erasing 52
moving 50
recording 34
releasing 49
setting 47
rechargeable battery 14
BEEP 57
Bookmark
add 40
play 40
H
Hard disk
C
free space 88
CD drive 88
CD-ROM 89
Charging 14
Checking
Hi-MD 80
HOLD 12
I
Importing 95
Installing 88
playing position 37
Cleaning 65
L
Labeling 45
Linear PCM 80
Combining tracks 54
M
analog 31
computer 60
digital 18
Manual recording 32
MD Simple Burner 91
MDLP 31
when charging 14
Contrast 59
Menu 25
Menu Mode 56
Move
Copyright protection 107
D
Data storage 62
Disc memory 57
Disc Mode 58
Divide 53
groups 50
tracks 49
My Library 95
N
DSP TYPE-S 83
Net MD 91
O
OpenMG Secure Module 3.4 106
Download from Www.Somanuals.com. All Manuals Search And Download.
111
P
W
Play mode
Main Play Mode 38
Repeat Play 41
Sub Play Mode 41
Q
Windows Media Player 88
Quick mode 58
R
Recording
Windows XP Home Edition 88
Windows XP Media Center Edition 88
Windows XP Media Center Edition 2004 88
Windows XP Professional 88
WMA 88
adding track marks 33
analog 31
digital 18
from microphone 29
mode (Hi-MD/MDLP) 31
Recording mode 92
Relabeling 47
S
Search 42
Simple Mode 92
SonicStage 95
SonicStage Help 102
Start (software)
MD Simple Burner 93
SonicStage 95
Synchro-recording 36
System environment 88
System limitations 88
T
Time Mark 33
Title 44
Track mark
Add (Divide) 53
Erase (Combine) 54
Transferring
to the MD Walkman 97
to your computer 99
U
Uninstalling 106
USB cable 10
USB port 88
Download from Www.Somanuals.com. All Manuals Search And Download.
112
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
This warranty is valid only in Canada.
*
3
2
6
6
4
6
9
1
1
*
(1)
Printed in Malaysia
Download from Www.Somanuals.com. All Manuals Search And Download.
|