2-179-084-11(2)
Making Video Connections
Your TV includes several types of video inputs. Use the inputs that
are available on your components that provide the best video
performance, as described below.
4 Programming the
Remote Control
KLV-32M1
Best Video
Performance
The remote control is preset to operate Sony brand video equipment.
Qu ick Se t u p Gu id e
Connector type
Sony Equipment
DVD/VCR
Programmable Code Number
601 (Sony Dream System)
801 (Sony Satellite Receiver)
HDMI
(High-Definition Multimedia Interface)
SAT/Cable
Component video
S VIDEO
If you have video equipment other than Sony brand that you want to
control with the TV’s remote control, use the following procedures to
program the remote control.
Please follow the steps to setup your TV:
Composite video
RF/Coaxial
Note
The equipment must have infrared (IR) remote capability in order to be used with this
remote control.
zzzzzzzz
zzzzzzzz
zzzzzzzz
1 2 3 4
Using the code list below, find the three-digit code number for the
manufacturer of your equipment. (If more than one code number is
listed, use the number listed first.)
1 Press the DVD/ VCR (FUNCTION) and RESET
Additional Connections
5
Checking the
Connecting Your TV
(See reverse side)
Running Initial
Setup
Programming
the Remote Control
buttons simultaneously, or press the SAT/ CABLE
DVD/
SAT/ POWER
CABLE
For best audio performance, connect your digital audio components
using either digital optical or digital coaxial audio connections.
Depending on which components are in your system, you may need
to complete additional connections. For example, if you have a
satellite receiver, you’ll need to connect the satellite antenna. If you
have an AV receiver, you’ll need to connect speakers.
MUTING VCR
(FUNCTION) and RESET buttons simultaneously.
DVD/ VCR and SAT/ CABLE buttons flash.
MODE
Supplied Accessories
PICTURE WIDE SLEEP DISPLAY
3
4
2 Press the function button you want to program.
To program a cable box or a satellite receiver
Press SAT/ CABLE (FUNCTION).
TOP MENU FAVORITES
MENU
To program video equipment
Note
If your product is not working properly
DO NOT RETURN TO THE STORE.
For service and technical assistance
Call our Customer Information Service Center (Toll Free):
1-800-222-SONY (7669) for US residents.
Press DVD/ VCR (FUNCTION).
The connection diagrams shown in the reverse side are recommendations only; other
possible solutions may exist. Connections that include an AV receiver can often be very
complex, so check your AV receiver’s instruction manual for additional details.
F1
F2
3 Enter the three-digit manufacturer’s code number
1, 2
using the 0-9 buttons.
TV VIDEO 1/2/3 VIDEO
4
VIDEO
5
4 Press ENT (enter).
1-877-899-SONY (7669) for Canadian residents.
5 To check if the code number works, aim the TV’s
remote control at the equipment and press DVD/
VCR and/ or SAT/ CABLE (POWER) that corre-
sponds with that equipment. If it responds, the
programming is completed. If not, try using the
other codes listed for that manufacturer.
RESET FREEZE MTS/SAP
GUIDE
TV/SAT
1
Sony Corporation © 2004 Printed in Japan
Tips
• If more than one code number is listed, try entering them one by
one until you come to the correct code for your equipment.
• If you enter a new code number, the code number you
previously entered at that setting is erased.
1 Checking the
2 Connecting Your TV 3 Running Initial Setup
Supplied Accessories
Remote control (RM-Y1107) (1)
and size AA batteries (2)
Manufacturer Code
Manufacturer Code
Manufacturer’s Codes
DVD Players
Aiwa*
338, 344
314, 337
319, 317
309, 308
332
Scott
312, 313, 321, 335,
323, 324, 325, 326
Audio Dynamic
Broksonic
Canon
Sharp
327, 328
• Review the following chart to determine which diagram to use to
connect the components in your system:
1 Press 1 (Power) on the TV.
Manufacturer Code
Signature 2000 (M.Ward) 338, 327
Sony
751
755
758
756
757
761
753
757
752
755
758
754
760
The Auto Setup menu automatically appears on the screen when
you turn on the TV for the first time.
SV 2000
Sylvania
Symphonic
Tashiro
Tatung
Teac
338
Citizen
General Electric
Hitachi
308, 309, 338, 310
338
Craig
302, 332
304, 338, 309
341, 312, 309
314, 336, 337
304
For these components
See reverse
side
Curtis Mathes
Daewoo
DBX
JVC
332
Magnavox
Mitsubishi
Panasonic
Philips
314, 336, 337
314, 336, 338, 337
309, 308
2 Press CH+ on the remote control or on the drop-down panel of
your TV to perform Auto Program.
Dimensia
Emerson
75-ohm coaxial cable (1)
AC pow er cord (1)
Technics
Toshiba
Wards
319, 320, 316, 317,
318, 341
312, 311
or
or
or
Pioneer
A
B
Fisher
330, 335
327, 328, 335, 331,
332
To open the drop-down panel of your TV, push up the panel door
just under the “v PUSH-OPEN” mark until you hear a click, then
the panel door will open.
When all the receivable channels are stored, the “Channel Skip/
Add” menu appears.
RCA/PROSCAN
Samsung
Toshiba
Funai
338
Yamaha
Zenith
314, 330, 336, 337
331
General Electric
Go Video
Goldstar
329, 304, 309
322, 339, 340
332
Zenith
Cable Boxes
Hitachi
306, 304, 305, 338
309, 308
DVD Changers
Instant Replay
JC Penney
Manufacturer Code
Manufacturer Code
309, 305, 304, 330,
314, 336, 337
Sony
230
Sony
765
Hamlin/Regal
222, 223, 224, 225,
226
JVC
314, 336, 337, 345,
346, 347
Panasonic
766
Jerrold, G.I.
201, 202, 203, 204,
205, 206, 207, 208,
218, 222
Auto Program is set to scan cable TV channels by default. To watch
VHF/ UHF channels with an antenna, see “To watch VHF/ UHF
channels with an antenna” in the operating instructions.
• Clamp screw s (2)
Kenwood
LG
314, 336, 332, 337
332
C
D
E
DVD/VCR Combo Units
Manufacturer Code
• Operating Instructions (1)
• Quick Setup Guide (1)
• Warranty Card (1)
Oak
227, 228, 229
219, 220, 221
214, 215
LXI (SEARS)
332, 305, 330, 335,
338
Sony
767
768
773
774
775
776
777
Panasonic
Pioneer
Magnavox
Marantz
Marta
308, 309, 310
314, 336, 337
332
Zenith
Toshiba
Samsung
JVC
Scientific Atlanta
Tocom
209, 210, 211
216, 217
If you need to perform Auto Program again
Memorex
Minolta
309, 335
Zenith
212, 213
1 Press MENU.
305, 304
Broksonic
Panasonic
Mitsubishi/MGA
Multitech
NEC
323, 324, 325, 326
325, 338, 321
314, 336, 337
309, 308
Satellite Receivers
Manufacturer Code
or
2 Press V/ v to select
3 Press V/ v to select “Auto Program,” then press
4 Press
(Channel), then press
.
Inserting Batteries into the Remote Control
Insert two size AA batteries (supplied) by matching the e and E on
the batteries to the diagram inside the remote control’s battery
compartment.
HDD/DVD Combo Units
Manufacturer Code
Sony
801
Olympic
Optimus
Orion
.
Dish Network
Echostar
810
327
Sony
770, 771, 772
810
317
.
General Electric
Hitachi
802
F
Panasonic
Pentax
308, 309, 306, 307
305, 304
5.1ch DVD AV System
Manufacturer Code
805
“Auto Program” appears and the TV starts scanning and
presetting channels automatically. When all the receivable
channels are stored, the “Channel Skip/ Add” menu appears.
Using this menu, you can start skipping unwanted channels (see
“To skip channels” in the operating instructions).
Hughes
804
Philco
308, 309
Mitsubishi
Panasonic
RCA/PROSCAN
Toshiba
809
• See the “Cables Required” chart that appears with the diagram to
determine which cables you’ll need. You may need to purchase
extra accessories, such as cables and splitters, depending on the
components you plan to connect.
Sony (DAV)
601, 602, 603, 604
Philips
308, 309, 310
308
803
Pioneer
802, 808
806, 807
Quasar
308, 309, 306
AV Receivers
RCA/PROSCAN
304, 305, 308, 309,
311, 312, 313, 310,
329
Manufacturer Code
Sony
764
* If an Aiwa VCR does not
work even though you enter
the code for Aiwa, enter the
code for Sony instead.
Realistic
309, 330, 328, 335,
324, 338
• Turn off and unplug all components before making connections.
• If you are connecting a digital cable box, you’ll need a special bi-
directional splitter that’s compatible with your cable box. Contact
your cable provider for details.
VCRs
5 Press MENU to exit the menu screen.
Sansui
Samsung
Sanyo
314
Manufacturer Code
322, 313, 321
330, 335
Sony
301, 302, 303
Admiral (M. Ward)
327
Download from Www.Somanuals.com. All Manuals Search And Download.
|