3-866-701-13 (1)
TFT LCD Co lo r
Co m p u t e r Disp la y
GB
FR
DE
ES
Operating Instructions
Mode d’emploi
Bedienungsanleitung
Manual de instrucciones
Istruzioni per l’uso
IT
CPD-L181
© 1999 by Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Ge t t in g St a rt e d
TABLE OF CONTENTS
Getting Started
Precautions ............................................................................................................................4
Identifying Parts and Controls ...........................................................................................5
Setup .......................................................................................................................................6
Turning on the Monitor and Computer ............................................................................8
Selecting the Input Signal ....................................................................................................8
Customizing Your Monitor
Introducing the On-Screen Display System ......................................................................9
Selecting the On-Screen Display Language ......................................................................9
Automatically Adjusting the Picture ...............................................................................10
Eliminating Flickering or Blurring Manually .................................................................10
Adjusting the Picture Position ..........................................................................................11
Adjusting the Picture Brightness ......................................................................................12
Adjusting the Contrast .......................................................................................................12
Changing the Picture Size According to the Signal .......................................................12
Changing or Adjusting the Color Temperature .............................................................14
Changing the On-Screen Display Position......................................................................14
Adjusting the Backlight .....................................................................................................15
Setting the Power Saving Delay Time .............................................................................15
Locking the Controls ..........................................................................................................16
Resetting the Adjustments ................................................................................................16
GB
Additional Information
Preset and User Modes ......................................................................................................17
Troubleshooting ..................................................................................................................17
Specifications .......................................................................................................................20
Appendix
Preset Mode Timing Table .................................................................................................. i
TCO’99 Eco-document ......................................................................................................... i
•
•
•
•
Macintosh is a trademark licensed to Apple Computer, Inc., registered in
the U.S.A. and other countries.
Windows® and MS-DOS are registered trademarks of Microsoft
Corporation in the United States and other countries.
IBM PC/AT and VGA are registered trademarks of IBM Corporation of
the U.S.A.
VESA is a trademark of Video Electronics Standard Association.
• ENERGY STAR is a U. S. registered mark.
•
All other product names mentioned herein may be the trademarks or
registered trademarks of their respective companies.
Furthermore, “™” and “®" are not mentioned in each case in this
manual.
•
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Ge t t in g St a rt e d
Maintenance
Precautions
• Clean the cabinet, panel and controls with a soft cloth
lightly moistened with a mild detergent solution. Do not
use any type of abrasive pad, scouring powder or solvent,
such as alcohol or benzine.
• Do not rub, touch, or tap the surface of the screen with
sharp or abrasive items such as a ballpoint pen or
screwdriver. This type of contact may result in a scratched
picture tube.
• Clean the screen with a soft cloth. If you use a glass
cleaning liquid, do not use any type of cleaner
containing an antistatic solution or similar additive as this
may scratch the screen’s coating.
Installation
• Prevent internal heat build-up by allowing adequate air
circulation. Do not place the monitor on surfaces (rugs,
blankets, etc.) or near materials (curtains, draperies) that
may block the ventilation holes.
• Do not install the monitor near heat sources such as
radiators or air ducts, or in a place subject to direct
sunlight, excessive dust, mechanical vibration or shock.
• Do not place the monitor near equipment which generates
magnetism, such as a transformer or high voltage power
lines.
Transportation
Handling the LCD screen
• When you transport this monitor, grip the bottom of the
screen firmly with both hands. If you drop the monitor,
you may be injured or the monitor may be damaged.
• When you transport this monitor for repair or shipment,
use the original carton and packing materials.
• Bright points of light (red, blue or green) may appear
on the LCD screen. This is not a malfunction. The LCD
screen is made with high-precision technology and
more than 99.99 % of the picture element is intact.
However, some of the picture element may not
appear or some of the picture element may appear
constantly.
Warning on power connection
• Do not leave the LCD screen facing the sun as it can
damage the LCD screen. Take care when you place the
monitor by a window.
• Do not push or scratch the LCD screen. Do not place a
heavy object on the LCD screen. This may cause the
screen to lose uniformity.
• If the monitor is used in a cold place, a residual image
may appear on the screen. This is not a malfunction.
When the monitor becomes warm, the screen returns to
normal.
• If a still picture is displayed for a long time, a residual
image may appear. The residual image will eventually
disappear.
• Use an appropriate power cord for your local power
supply.
For the customers in the U.S.A.
If you do not use the appropriate cord, this monitor will
not conform to mandatory FCC standards.
For the customers in the UK
If you use the monitor in the UK, please use the supplied
UK cable with the UK plug.
Examples of plug types
• The screen and the cabinet become warm during
operation. This is not a malfunction.
for 100 to 120 V AC for 200 to 240 V AC
for 240 V AC only
The outlet should be installed near the equipment
and be easily accessible.
Replacement of the fluorescent tube
A specially designed fluorescent tube is installed as the
lighting apparatus for this monitor. If the LCD screen
becomes dark, unstable or does not turn on, replace the
fluorescent tube with an new one. Consult your Sony dealer
when replacing the fluorescent tube.
Disposal of the monitor
• Do not dispose of the monitor with general waste.
Do not include the monitor with household waste.
• The fluorescent tube includes mercury. Dispose of the
monitor in accordance with the regulations of your
local sanitation authority.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Ge t t in g St a rt e d
Identifying Parts and Controls
See the pages in parentheses for further details.
Rear
Front
1
POWER
2
3
4
5
6
7
MENU
8
9
AUTO
GB
*
!º
7 …1, 2 in p u t sw it ch a n d in d ica t o r (p a g e 8)
Selects the input signal from …1 or …2. Each time you
press the button, the input changes and the
1 u (p o w e r) sw it ch a n d in d ica t o r (p a g e s 8,
17)
Turns the monitor on or off.
corresponding indicator lights up.
The indicator lights up in green when the monitor is
turned on, and either flashes in green and orange or
lights up in orange when the monitor is in power
saving mode.
8 POWER (m a in p o w e r) sw it ch (p a g e 8)
To turn on the main power, press the “–” side. To turn
off, press the “®” side.
2 MENU (m e n u ) b u t t o n (p a g e s 9 – 16, 19)
9 …1/…2 in p u t co n n e ct o rs (HD15) (p a g e s 6,
Displays the MENU OSD (On-Screen Display).
8)
Input analog RGB video signals (0.714 Vp-p, positive)
and SYNC signals.
3 ¨ (b rig h t n e ss) (˘) b u t t o n (p a g e s 9 – 16)
Adjusts the picture brightness.
Functions as the ˘ button when selecting menu items.
!º AC IN co n n e ct o r (p a g e 6)
Provides AC power to the monitor from the wall outlet.
4 > (co n t ra st ) (≥) b u t t o n (p a g e s 9 – 16)
Adjusts the contrast.
* This connector is used by service personnel only. Do not
connect anything to this outlet.
Functions as the ≥ button when selecting menu items.
5 +/– (a d ju st ) b u t t o n s (p a g e s 11 – 16)
Adjusts the selected menu item.
6 AUTO b u t t o n (p a g e 10)
When the signal from the computer is displayed on this
monitor, press the AUTO button to automatically adjust
the picture to the computer.
You also should press this button if the picture is not
centered or if it is fuzzy.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Ge t t in g St a rt e d
Connecting to a Macintosh
Setup
Use the supplied Macintosh adapter.
Before using this monitor, check that the following items are
included in your carton:
• LCD monitor (1)
• Rear cover (1)
• Power cord (1)
to …1 or …2
• HD15 video signal cable (1)
• Macintosh adapter (1)
• Windows Monitor Information Disk/Utility Disk (1)
• Macintosh Utility Disk (1)
• Warranty card (1)
Macintosh or
compatible computer
HD15 video
signal cable
(supplied)
to monitor output
• These operating instructions (1)
Step 1: Connect the monitor to the
computer
Macintosh adapter
(supplied)*
*
Connect the supplied Macintosh adapter to the computer before
Turn off the monitor and computer before connecting.
connecting the cable. This adapter is compatible with Macintosh
LC, Performa, Quadra, Power Macintosh and Power Macintosh
G3 series computers (sold before January, 1999). If you are
connecting to a Power Macintosh G3 series that sold after
January 1999, you will need a different adapter (not supplied).
Macintosh II series and some older versions of PowerBook
models may need an adapter with micro switches (not
supplied).
Connecting to an IBM PC/AT or compatible
computer
to …1 or …2
Step 2: Connect the power cord
IBM PC/AT or
compatible
computer
With the monitor and computer switched off, connect one
end of the AC power cord to the monitor and the other end
to a power outlet.
HD15 video
signal cable
to monitor output
(supplied)
to AC IN
If yo u r PC syst e m is n o t co m p a t ib le w it h Plu g &
Pla y (DDC2B a n d DDC2Bi)
This monitor uses the No. 9 pin in the video signal connector for
Plug & Play (DDC2B and DDC2Bi) compatibility. See page 20 for
the location of the No. 9 pin.
to a power outlet
Power cord
(supplied)
•
If your computer accepts the No. 9 pin, use the supplied HD15
video signal cable.
•
If your computer does not accept the No. 9 pin, please consult
your dealer for advice on obtaining an HD15 adapter.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Ge t t in g St a rt e d
Use of the Tilt
Step 3: Attaching the rear cover
The tilt feature will adjust the monitor within 30° upward,
and 45° to the left or right. However, best viewing results
can be obtained by tilting the screen upward by 5° or more.
To turn the monitor, hold at the bottom with both hands as
illustrated below.
After connecting the computer and power cord, attach the
supplied rear cover.
Make sure that you keep the screen upright when attaching
the rear cover.
1 Hook the computer cable and power cord.
30°
GB
45°
2 Press the top of the rear cover against the top of the
part for attaching the cover, and then push the rear
cover in.
45°
1
2
3 Turn the screw to fasten the rear cover.
Unlocked
Locked
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Ge t t in g St a rt e d
Fo r cu st o m e rs u sin g Win d o w s NT4.0
Monitor setup in Windows NT4.0 is different from Windows 95/98
and does not involve the selection of monitor type. Refer to the
Windows NT4.0 instruction manual for further details on adjusting
the resolution, refresh rate, and number of colors.
Turning on the Monitor and
Computer
1 Press the “–” side of the POWER switch.
Adjusting the monitor’s resolution and color number
POWER
Adjust the monitor’s resolution and color number by referring to
your computer’s instruction manual. The color number may vary
according to your computer or graphics board. The color palette
setting and the actual number of colors are as follows:
•
•
High color (16 bit) n 65,536 colors.
True Color (24 bit) n about 16.77 million colors
In true color mode (24 bit), speed may be slower.
2 Press the u switch.
Selecting the Input Signal
You can connect two computers to this monitor using the
HD 15 connectors. To switch between the two computers,
use the … button.
3 Turn on the computer.
The installation of your monitor is complete.
If necessary, use the monitor’s controls to adjust the picture.
Computers
If no picture appears on your screen
connected to
…2
•
•
Check that the monitor is correctly connected to the computer.
If NO INPUT SIGNAL appears on the screen, try changing the
input signal, and confirm that your computer’s graphics board is
completely seated in the correct bus slot.
connected to
…1
•
If you are replacing an old monitor with this model and OUT OF
SCAN RANGE appears on the screen, reconnect the old
monitor. Then adjust the computer’s graphics board so that the
horizontal frequency is between 30 – 92 kHz, the vertical
frequency is between 40 – 85 Hz, and the resolution is 1280 x
1024 or lower.
Press the … button.
The input signal and corresponding input indicator change
each time you press this button.
For more information about the on-screen messages, see “Trouble
symptoms and remedies” on page 18.
Fo r cu st o m e rs u sin g Win d o w s 95/98
To maximize the potential of your monitor, install the new model
information file from the supplied Windows Monitor Information
Disk/Utility Disk onto your PC.
This monitor complies with the “VESADDC” Plug & Play standard.
If your PC/graphics board complies with DDC, select “Plug & Play
Monitor (VESA DDC)” or this monitor’s model name as the
monitor type in the “Control Panel” of Windows 95/98. If your
PC/graphics board has difficulty communicating with this monitor,
load the Windows Monitor Information Disk/Utility Disk and
select this monitor’s model name as the monitor type.
No t e
If you restart the computer you want to view, or that computer is in
power saving mode, the monitor may automatically switch to the
other connector’s signal. If this happens, manually select the
desired signal using the … button.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your Monitor
Before adjusting
Selecting the On-Screen Display
Language
Connect the monitor and the computer, and turn them
on.
Wait for at least 30 minutes before making adjustments
for the best result.
You can select the OSD language from English, French,
German, Spanish, Italian, and Japanese.
1 Press the MENU button.
Introducing the On-Screen
Display System
The MENU OSD appears.
MENU
MENU
EXIT
OK
Most adjustments are made using the MENU OSD.
To change the on-screen display language, see “Selecting
the On-Screen Display Language.”
MENU
PHASE
PITCH
CENTER
ZOOM/SMOOTHING
MENU
COLOR
MENU
OK
LANGUAGE
OPTION
EXIT
PHASE
PITCH
CENTER
GB
ZOOM/SMOOTHING
2 Press the ˘/≥ buttons to select LANGUAGE, and
press the MENU button.
COLOR
LANGUAGE
OPTION
The LANGUAGE OSD appears.
LANGUAGE
MENU
EXIT
ENGLISH
FRANÇAIS
DEUTSCH
ESPAÑOL
ITALIANO
Closes the MENU OSD.
PHASE
Displays the PHASE OSD. Adjust the phase when the
characters or pictures appear fuzzy throughout the entire
screen. Adjust the phase after adjusting the pitch.
PITCH
3 Press the ˘/≥ buttons to select the desired language,
and press the MENU button.
Displays the PITCH OSD. Adjust the pitch when the
characters or pictures are not clear at some parts of the
screen.
The MENU OSD of the selected language appears.
MENU
MENU
OK
MENU
EXIT
CENTER
PHASE
Displays the CENTER OSD for adjusting the centering of
the picture.
PITCH
CENTER
ZOOM/SMOOTHING
COLOR
LANGUAGE
OPTION
ZOOM/SMOOTHING
Displays the ZOOM/SMOOTHING OSD for adjusting the
picture’s sharpness according to the input signal’s aspect
ratio or resolution.
The OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button again.
COLOR
Displays the COLOR OSD for adjusting the color
temperature.
LANGUAGE
Displays the LANGUAGE OSD for selecting the on-screen
display language.
OPTION
Displays the OPTION OSD. You can adjust settings such as
the backlight, OSD position, power saving delay time and
control lock.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your Monitor
Automatically Adjusting the
Picture
Eliminating Flickering or Blurring
Manually
If the picture is flickering or fuzzy, press the AUTO button.
The monitor is automatically adjusted to match the signal
from the connected computer.
If a part of the screen is flickering or blurring, press the
AUTO button. If this operation does not work, adjust the
Pitch and Phase as follows.
Further fine adjustments may be needed with some
computers. In this case, manually adjust the monitor.
Once the pitch and phase are adjusted, they will be stored in
memory for the current input signal.
1 Turn on the monitor.
2 Turn on the computer.
1 Set the resolution to 1280 × 1024 on the computer.
If the resolution of the graphics board is lower than 1280
× 1024, set ZOOM to REAL (page 12).
3 Press the AUTO button.
2 Load the Utility Disk.
The monitor adjusts the pitch to match the input signal
so that the picture appears sharp, and fits the picture to
the center of the screen.
Use the appropriate disk for your computer.
For Windows 95/98
Windows Monitor Information Disk/Utility Disk
For Macintosh
AUTO
Macintosh Utility Disk
3 Start the Utility Disk and display the test pattern.
For Windows 95/98
Click [Utility Disk] n [Windows] n [Utility.exe].
For Macintosh
Click [Utility Disk] n [SONY-Utility].
4 Press the MENU button.
Notes
The MENU OSD appears.
•
This function is intended for use with a computer running
Windows or similar graphic user interface software that
provides a full-screen picture. It may not work properly if the
background color is dark or if the input picture does not fill the
screen to the edges (such as an MS-DOS prompt).
MENU
MENU
EXIT
OK
MENU
PHASE
PITCH
CENTER
•
The screen may go blank for a few seconds while performing the
auto-sizing function. This is not a malfunction.
ZOOM/SMOOTHING
COLOR
LANGUAGE
OPTION
If the picture is flickering or fuzzy even after you
press the AUTO button
5 Press the ˘/≥ buttons to select PITCH, and press the
MENU button again.
Adjust the Pitch and Phase by referring to “Eliminating
Flickering or Blurring Manually.”
The PITCH OSD appears.
If the picture is not in the center of the screen
even after you press the AUTO button
PITCH
MENU
Adjust using the CENTER OSD by referring to “Adjusting
the Picture Position.”
0
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your Monitor
6 Press the +/– buttons until the screen color becomes
uniform.
Adjusting the Picture Position
Adjust so that the vertical stripes disappear.
If the picture is not in the center of the screen, press the
AUTO button. If this operation does not work, adjust the
centering as follows.
Once the centering is adjusted, it will be stored in memory
for the current input signal.
1 Start the Utility Disk and display the test pattern.
Do steps 2 and 3 of “Eliminating Flickering or Blurring
Manually.”
2 Press the MENU button.
MENU
MENU
EXIT
OK
7 Press the MENU button.
The MENU OSD appears.
The MENU OSD appears.
PHASE
MENU
If horizontal stripes are observed over the entire screen,
adjust the Phase in the next step.
PITCH
CENTER
ZOOM/SMOOTHING
COLOR
LANGUAGE
OPTION
8 Press the ˘/≥ buttons to select PHASE, and press the
MENU button again.
GB
The PHASE OSD appears.
PHASE
MENU
3 Press the ˘/≥ buttons to select CENTER, and press
the MENU button again.
The CENTER OSD appears.
4
CENTER
H
V
MENU
9 Press the +/– buttons until the screen color becomes
uniform.
Adjust until the horizontal stripes are at a minimum.
26
4 Move the picture up, down, left, or right until the
frame at the perimeter of the test pattern
disappears.
For horizontal adjustment, select H using the ˘/≥
buttons and adjust the position using the +/–
buttons.
+ . . . to move the picture right
– . . . to move the picture left
10When you have finished, click [END] on the screen to
CENTER
turn off the test pattern.
H
V
The OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button twice.
26
Continued
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your Monitor
For vertical adjustment, select V using the ˘/≥
buttons and adjust the position using the +/–
buttons.
Adjusting the Contrast
+ . . . to move the picture up
– . . . to move the picture down
Once the contrast is adjusted, it will be stored in memory for
all input signals received.
CENTER
1 Press the > (contrast) ≥ button.
H
V
The CONTRAST OSD appears.
CONTRAST
26
26
5 When you have finished, click [END] on the screen to
48. 4kHz / 60Hz
turn off the test pattern.
The OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button twice.
Horizontal
Frequency* Frequency*
Vertical
2 Press the +/– buttons.
+. . . for more contrast
Adjusting the Picture Brightness
Once the brightness is adjusted, it will be stored in memory
for all input signals received.
–. . . for less contrast
1 Press the ¨ (brightness) ˘ button.
The BRIGHTNESS OSD appears.
The OSD automatically disappears after about 3 seconds.
BRIGHTNESS
*
The horizontal and vertical frequencies for the received input
signal appear in the CONTRAST OSD.
26
Changing the Picture Size
According to the Signal
48. 4kHz / 60Hz
Horizontal
Frequency* Frequency*
Vertical
The monitor is set at the factory to display the picture on the
screen in full, irrespective of the picture’s mode or
resolution. You can also view the picture at its actual aspect
ratio or resolution. Note that 1280 × 1024 resolution signals
fill the entire screen and ZOOM is not possible.
Once the zoom is set, it will be stored in memory for the
current input signal.
2 Press the +/– buttons.
+ . . . for more brightness
– . . . for less brightness
FULL 1
The OSD automatically disappears after about 3 seconds.
The input signal is displayed on the screen in full,
irrespective of the picture’s mode or resolution.
FULL 2
*
The horizontal and vertical frequencies for the received input
signal appear in the BRIGHTNESS OSD.
The input signal is displayed on the screen at its actual
aspect ratio. Therefore, black bands may appear at the
top and bottom of the picture depending on the signal.
REAL
If the screen is too bright when using the monitor in a
dark room
Decrease the BACKLIGHT (page 15).
The input signal is displayed on the screen at its actual
resolution. (Sub-SXGA signals are displayed at the center
of the screen surrounded by black frame.)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your Monitor
1 Press the MENU button.
STANDARD
MENU
MENU
EXIT
OK
The MENU OSD appears.
Standard smoothing effect (factory preset smoothing
effect).
TEXT
MENU
PHASE
PITCH
CENTER
To make the characters appear clear. (This mode is suited
for text-based applications.)
GRAPHICS
ZOOM/SMOOTHING
COLOR
LANGUAGE
OPTION
To make the pictures appear clean. (This mode is suited
for CD-ROM software such as photo images or
illustrations.)
2 Press the ˘/≥ buttons to select ZOOM/SMOOTHING,
and press the MENU button again.
1 Press the MENU button.
MENU
MENU
EXIT
OK
The ZOOM/SMOOTHING OSD appears.
The MENU OSD appears.
MENU
MENU
PHASE
PITCH
CENTER
ZOOM/SMOOTHING
COLOR
LANGUAGE
OPTION
ZOOM
ZOOM
/SMOOTHING
FULL1
FULL2
REAL
GB
SMOOTHING
2 Press the ˘/≥ buttons to select ZOOM/SMOOTHING,
and press the MENU button again.
The ZOOM/SMOOTHING OSD appears.
3 Press the ˘/≥ buttons to select ZOOM.
MENU
ZOOM
/SMOOTHING
ZOOM
SMOOTHING
FULL1
FULL2
REAL
ZOOM
ZOOM
/SMOOTHING
FULL1
FULL2
REAL
SMOOTHING
4 Press the +/– buttons to select the desired mode.
3 Press the ˘/≥ buttons to select SMOOTHING.
ZOOM
/
SMOOTHING
ZOOM
SMOOTHING
STANDARD
TEXT
The OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button twice.
GRAPHICS
To display the picture on the screen in full
4 Press the +/– buttons to select the desired mode.
Select “FULL 1” in step 4.
If the picture displayed at FULL 1 or FULL2
mode is not smooth
The OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button twice.
Use the picture smoothing function. The smoothing effect
becomes stronger in the order of TEXT n STANDARD n
GRAPHICS. Note that 1280 × 1024 resolution signals are
shown only in REAL mode and SMOOTHING is not
possible.
Once the smoothing is set, it will be stored in memory for
the current input signal.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your Monitor
Changing or Adjusting the Color
Temperature
Changing the On-Screen Display
Position
The color temperature is set to 9300K at the factory.
You can change the color temperature to 6500K or 5000K.
Use this function to adjust the color temperature so that it
matches the actual colors of a printed picture.
Once the color temperature is adjusted, it will be stored in
memory for all input signals received.
You can change the OSD position (for example, when you
want to adjust the picture behind the OSD).
1 Press the MENU button.
MENU
MENU
EXIT
OK
The MENU OSD appears.
MENU
PHASE
PITCH
CENTER
1 Press the MENU button.
MENU
MENU
EXIT
OK
ZOOM/SMOOTHING
COLOR
LANGUAGE
OPTION
The MENU OSD appears.
PHASE
MENU
PITCH
CENTER
ZOOM/SMOOTHING
2 Press the ˘/≥ buttons to select OPTION, and press
COLOR
the MENU button again.
LANGUAGE
OPTION
OPTION
The OPTION OSD appears.
MENU
2 Press the ˘/≥ buttons to select COLOR, and press the
MENU button again.
: 5SEC
: UNLOCK
The COLOR OSD appears.
COLOR
MENU
OSD H POSITION
9300K
6500K
5000K
USER MODE
R
G
B
50
50
50
3 Press the ˘/≥ buttons to select
(OSD H POSITION)
or
(OSD V POSITION).
To adjust the horizontal
position
To adjust the vertical
position
OPTION
OPTION
3 Press the ˘/≥ buttons to select the color
temperature.
If you need to make further adjustments to the selected
color temperature, go to step 4.
If you don’t, press the MENU button. The MENU OSD
appears.
: 5SEC
: UNLOCK
: 5SEC
: UNLOCK
OSD H POSITION
OSD V POSITION
4 Press the ˘/≥ buttons to select R (red) or B (blue),
and press the +/– buttons to get the desired color.
The color changes as the R or B components increase or
decrease with respect to G (green).
4 Press the +/– buttons to move the OSD to the desired
position.
COLOR
9300K
6500K
5000K
USER MODE
R
G
B
50
50
50
The OPTION OSD automatically disappears after about 30
seconds.
To close the OSD, press the MENU button twice.
The OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button twice.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your Monitor
Adjusting the Backlight
Setting the Power Saving Delay
Time
If the screen is too bright when you are using the monitor in
a dark room, adjust the backlight.
You can set the delay time before the monitor enters the
power saving mode. See page 17 for more information on
this monitor’s power saving capabilities.
1 Press the MENU button.
MENU
MENU
EXIT
OK
The MENU OSD appears.
1 Press the MENU button.
MENU
PHASE
MENU
MENU
EXIT
OK
The MENU OSD appears.
PITCH
CENTER
ZOOM/SMOOTHING
MENU
PHASE
COLOR
PITCH
CENTER
LANGUAGE
OPTION
ZOOM/SMOOTHING
COLOR
LANGUAGE
OPTION
2 Press the ˘/≥ buttons to select OPTION, and press
the MENU button again.
The OPTION OSD appears.
2 Press the ˘/≥ buttons to select OPTION, and press
OPTION
GB
the MENU button again.
MENU
The OPTION OSD appears.
OPTION
MENU
: 5SEC
: UNLOCK
: 5SEC
OSD H POSITION
: UNLOCK
OSD H POSITION
3 Press the ˘/≥ buttons to select
(BACKLIGHT).
OPTION
ZZ...
3 Press the ˘/≥ buttons to select
(PWR SAVE
DELAY).
OPTION
26
60MIN
1MIN
5SEC
OFF
: UNLOCK
BACKLIGHT
PWR SAVE DELAY
4 Press the +/– buttons to adjust the light level.
4 Press the +/– buttons to select the desired time.
The OPTION OSD automatically disappears after about 30
seconds.
To close the OSD, press the MENU button twice.
When PWR SAVE DELAY is set to OFF, the monitor
does not go into power saving mode.
The OPTION OSD automatically disappears after about 30
seconds.
To close the OSD, press the MENU button twice.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your Monitor
To cancel the control lock
Locking the Controls
Press the + button in step 4 to select UNLOCK.
The control lock function disables all of the controls except
the u (power) switch, MENU and some other buttons on
the front panel.
Resetting the Adjustments
You can reset all of the adjustments and settings to the
factory settings.
Once you select “LOCK,” you can select only the following
items in the MENU OSD:
The color temperature is reset to 9300K, the zoom setting is
reset to FULL 1 mode, and the power saving delay time is
reset to 5 seconds. The control lock is cancelled. All other
adjustments return to the default settings. The on-screen
language, however, does not change.
• EXIT
• CONTROL LOCK and FACTORY PRESET in the
OPTION OSD
If you press any locked button, the
the screen.
mark appears on
1 Press the MENU button.
MENU
MENU
EXIT
OK
The MENU OSD appears.
1 Press the MENU button.
MENU
MENU
EXIT
OK
The MENU OSD appears.
PHASE
MENU
PITCH
CENTER
PHASE
MENU
PITCH
CENTER
ZOOM/SMOOTHING
COLOR
ZOOM/SMOOTHING
LANGUAGE
COLOR
LANGUAGE
2 Press the ˘/≥ buttons to select OPTION, and press
the MENU button again.
2 Press the ˘/≥ buttons to select OPTION, and press
the MENU button again.
The OPTION OSD appears.
OPTION
The OPTION OSD appears.
OPTION
MENU
MENU
: 5SEC
: UNLOCK
: 5SEC
: UNLOCK
OSD H POSITION
OSD H POSITION
3 Press the ˘/≥ buttons to select ? (FACTORY
PRESET).
3 Press the ˘/≥ buttons to select
(CONTROL
OPTION
OPTION
LOCK).
:
5SEC
ON
UNLOCK
LOCK
FACTORY PRESET
CONTROL LOCK
4 Press the + button.
4 Press the – button to select LOCK.
The OPTION OSD automatically disappears after about 30
seconds.
To close the OSD, press the MENU button twice.
The OPTION OSD automatically disappears after about 30
seconds.
To close the OSD, press the MENU button twice.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Ad d it io n a l In fo rm a t io n
Preset and User Modes
Troubleshooting
This monitor has factory preset modes for the most popular
industry standards for true “plug and play” compatibility.
(See Appendix for a list of the factory preset modes.)
When a new input signal is entered, the monitor selects the
appropriate factory preset mode and momentarily adjusts
the phase calibration to provide a high quality picture to the
center of the screen. The calibration is stored in memory
and is immediately recalled whenever the same input signal
is received.
For input signals that do not match one of the factory preset
modes, the digital Multiscan technology of this monitor
performs all of the adjustments necessary to ensure that a
clear picture appears on the screen for any timing in the
monitor’s frequency range. However, it may be necessary
to fine tune the vertical/horizontal centering. Simply press
the AUTO button or adjust the monitor according to the
adjustment instructions. The adjustments are stored
automatically as a user mode and recalled whenever the
corresponding input signal is received.
This section may help you isolate the cause of a problem
and as a result, eliminate the need to contact technical
support.
On-screen messages
If there is something wrong with the input signal, one of the
following messages appears on the screen. To solve the
problem, see “Trouble symptoms and remedies” on page 18.
INFORMATION
OUT OF SCAN RANGE
GB
“OUT OF SCAN RANGE” indicates that the input signal is
not supported by the monitor’s specifications.
“NO INPUT SIGNAL” indicates that no signal is input to the
monitor.
Power Saving Function
This monitor meets the power-saving guidelines set by
VESA and ENERGY STAR, as well as the more stringent
NUTEK .
If the monitor is connected to a computer or video graphics
board that is VESA DPMS (Display Power Management
Signaling) compliant, the monitor will automatically reduce
power consumption in three stages as shown below.
You can set the delay time before the monitor enters the
power saving mode using the OSD. Set the time according
to “Setting the Power Saving Delay Time” on page 15.
Power consumption Power
u Indicator
mode
consumption
1
2
Normal operation
Standby (1st mode)
≤ 48 W
Green
≤ 15 W
Green and orange
alternate
3
4
Suspend (2nd mode)
(sleep)*
≤ 15 W
Green and orange
alternate
Active-off (3rd mode)** ≤ 1 W
Orange
(deep sleep)*
5
6
Power-off
≤ 1 W
Off
Off
Main power-off
0 W
*
“Sleep” and “deep sleep” are power saving modes defined by
the Environmental Protection Agency.
** When your computer enters the power saving mode, the input
signal is cut and NO INPUT SIGNAL appears on the screen.
After the time set in “Changing the Power Saving Delay Time”
(page 15) has elapsed, the monitor enters the power saving
mode.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Ad d it io n a l In fo rm a t io n
Trouble symptoms and remedies
If the problem is caused by the connected computer or other equipment, please refer to the connected equipment’s instruction
manual.
Use the self-diagnosis function (page 19) if the following recommendations do no resolve the problem.
Sym p t o m
Ch e ck t h e se it e m s
No picture
If the u indicator is not lit
• Check that the power cord is properly connected.
• Check that the u (power) switch is in the “on” position.
If the “NO INPUT SIGNAL”
message appears on the screen,
or if the u indicator is either
orange or alternating between
green and orange
• Check that the video signal cable is properly connected and all plugs are firmly seated in
their sockets.
• Check that the input select setting is correct.
• Check that the HD15 video input connector’s pins are not bent or pushed in.
pProblems caused by the connected computer or other equipment
• The computer is in power saving mode. Try pressing any key on the computer keyboard.
• Check that the computer’s power is “on.”
• Check that your graphics board is completely seated in the proper bus slot.
If the “OUT OF SCAN RANGE” pProblems caused by the connected computer or other equipment
message appears on the screen
• Check that the video frequency range is within that specified for the monitor. If you
replaced an old monitor with this monitor, reconnect the old monitor and adjust the
frequency range to the following.
Horizontal: 30 – 92 kHz, Vertical: 48 – 85 Hz
If no message is displayed and
the u indicator is green or
flashing orange
• Use the self-diagnosis function (page 19).
If using Windows 95/98
• If you replaced an old monitor with this monitor, reconnect the old monitor and do the
following. Install the Windows Monitor Information Disk/Utility Disk and select “CPD-
L181” from among the Sony monitors in the Windows 95/98 monitor selection screen.
If using a Macintosh system
• Check that the Macintosh adapter and the video signal cable are properly connected
(page 6).
Picture flickers, bounces,
oscillates, or is scrambled.
• Press the AUTO button. If this does not work, adjust the pitch and phase (page 10).
• Isolate and eliminate any potential sources of electric or magnetic fields such as other
monitors, laser printers, electric fans, fluorescent lighting, or televisions.
• Move the monitor away from power lines or place a magnetic shield near the monitor.
• Try plugging the monitor into a different AC outlet, preferably on a different circuit.
• Try turning the monitor 90° to the left or right.
pProblems caused by the connected computer or other equipment
• Check your graphics board manual for the proper monitor setting.
• Confirm that the graphics mode (VESA, Macintosh 21” Color, etc.) and the frequency of
the input signal are supported by this monitor (Appendix). Even if the frequency is
within the proper range, some graphics boards may have a sync pulse that is too narrow
for the monitor to sync correctly.
• Adjust the computer’s refresh rate (vertical frequency) to obtain the best possible picture.
Picture is fuzzy.
Picture is dark.
• Press the AUTO button. If this does not work, adjust the pitch and phase (page 10).
• Adjust the contrast and brightness (page 12).
• Adjust the backlight (page 15)
• Adjust the brightness (page 12).
• It takes several seconds for the monitor to warm up after the power is turned on. The
picture will appear momentarily.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Ad d it io n a l In fo rm a t io n
Sym p t o m
Ch e ck t h e se it e m s
• Eliminate the use of video cable extensions and/or video switch boxes.
• Check that all plugs are firmly seated in their sockets.
Picture appears to be ghosting.
• Press the AUTO button (page 10).
• Adjust the size (page 12) or centering (page 11). Note that some video modes do not fill
the screen to the edges.
Picture is not centered or sized
properly.
• Adjust the pitch and phase (page 10).
Wavy or elliptical (moire)
pattern is visible.
Color is not uniform.
• Press the AUTO button. If this does not work, adjust the pitch and phase (page 10).
• Adjust the color temperature (page 14).
White does not look white.
Monitor buttons do not
operate.
• If the control lock is set to LOCK, set it to UNLOCK (page 16).
If t h e u (p o w e r) in d ica t o r is fla sh in g
o ra n g e
Self-diagnosis function
GB
This monitor is equipped with a self-diagnosis function. If
there is a problem with your monitor or computer(s), the
screen will go blank and the u(power) indicator will either
light up green or flash orange. If the u(power) indicator is
lit in orange, the computer is in power saving mode. Try
pressing any key on the keyboard.
Press the u(power) button to turn the monitor off and
on.
If the u(power) indicator lights up green, the monitor is
working properly.
If the u(power) indicator is still flashing, there is a
potential monitor failure. Count the number of seconds
between orange flashes of the u(power) indicator and
inform your authorized Sony dealer of the monitor’s
condition. Be sure to note the model name and serial
number of your monitor. Also note the make and model of
your computer and graphics board.
u (power)
indicator
Disp la yin g t h e INFORMATION OSD
If t h e u (p o w e r) in d ica t o r is g re e n
You can confirm the name, the serial number and the year
of manufacture of this monitor.
1 Disconnect the video signal cable(s).
2 Before the monitor goes to power saving mode,
press the + button and keep it pressed for 2 seconds.
Press and hold the MENU button for 5 seconds.
The INFORMATION OSD appears.
Example
INFORMATION
Model name
MODEL : CPD-L181
SER NO : 1234567
Serial number
If all four color bars appear (white, red, green, blue), the
monitor is working properly. Reconnect the video signal
cable(s) and check the condition of your computer(s).
MANUFACTURED : 1999-52
Week and year of
manufacture
If the color bars do not appear, there is a potential monitor
failure. Inform your authorized Sony dealer of the
monitor’s condition.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Ad d it io n a l In fo rm a t io n
Specifications
LCD panel
Panel type: a-Si TFT Active Matrix
Picture size: 18.1 inches (46 cm)
RGB operating frequency*
fh: 30 – 92 kHz
Input signal format
fv: 48 – 85 Hz
Pixel efficiency
Resolution
99.99 %
H: max. 1280 dots
V: max. 1024 lines
AC 100 – 240 V, 50 – 60 Hz,
1.0 – 0.6 A
Power requirements
Power consumption
Dimensions (w/h/d)
Max. 48 W
Including the stand:
Approx. 468 × 422 × 207.5 mm
(18 1/2 × 16 5/8 × 8 1/4 in.)
Monitor only:
Approx. 468 × 354.5 × 90 mm
(18 1/2 × 14 × 3 5/8 in.)
Approx. 9 kg (19 lb 14 oz)
including the stand
DDC/DDC2B/DDC2Bi
See page 6.
Mass
Plug & Play
Supplied accessories
* Re co m m e n d e d h o rizo n t a l a n d ve rt ica l t im in g
co n d it io n s
Horizontal sync width duty should be more than 4.8% of total
horizontal time or 0.8 µsec., whichever is larger.
Horizontal blanking width should be more than 2.5 µsec.
Vertical blanking width should be more than 450 µsec.
Design and specifications are subject to change without
notice.
…1/…2 pin assignment
1
5 4 3 2
10 9 8
7
6
15 14 13 12 11
Pin No. Signal
Pin No. Signal
1
2
Red
8
Blue Ground
DDC + 5V*
Ground
Green
(Composite Sync
on Green)
9
10
11
12
ID (Ground)
3
4
5
6
7
Blue
Bi-Directional
Data (SDA)*
ID (Ground)
DDC Ground*
Red Ground
Green Ground
13
14
15
H. Sync
V. Sync
Data Clock (SCL)*
*
Display Data Channel (DDC) Standard of VESA
20
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE DES MATIERES
Préparation
Précautions ............................................................................................................................4
Identification des composants et des commandes...........................................................5
Installation .............................................................................................................................6
Mise sous tension du moniteur et de l’ordinateur ...........................................................8
Sélection du signal d’entrée ................................................................................................8
Personnalisation du moniteur
Présentation du système d’écrans de menu......................................................................9
Sélection de la langue d’affichage à l’écran ......................................................................9
Réglage automatique de l’image ......................................................................................10
Elimination manuelle du scintillement ou du flou ........................................................10
Réglage de la position de l’image .....................................................................................11
Réglage de la luminosité de l’image ................................................................................12
Réglage du contraste ..........................................................................................................12
Modification de la taille de l’image en fonction du signal ...........................................12
Changement ou réglage de la température de couleur .................................................14
Changement de la position d’affichage des écrans de menu .......................................14
Réglage du rétro-éclairage.................................................................................................15
Réglage du délai d’activation du mode d’économie d’énergie ...................................15
Verrouillage des commandes............................................................................................16
Réinitialisation des réglages ..............................................................................................16
FR
Informations complémentaires
Modes présélectionnés et utilisateur................................................................................17
Dépannage ...........................................................................................................................17
Spécifications .......................................................................................................................20
Appendix
Preset Mode Timing Table .................................................................................................. i
TCO’99 Eco-document ......................................................................................................... i
•
•
•
•
Macintosh est une marque commerciale sous licence d’Apple
Computer, Inc., déposée aux Etats-Unis et dans d’autres pays.
Windows® et MS-DOS sont des marques commerciales déposées de
Microsoft Corporation aux Etats-Unis et dans d’autres pays.
IBM PC/AT et VGA sont des marques commerciales déposées d’IBM
Corporation of the U.S.A.
VESA est une marque commerciale de Video Electronics Standard
Association.
• ENERGY STAR est une marque déposée aux Etats-Unis.
•
Tous les autres noms de produits mentionnés peuvent être des
marques commerciales ou des marques commerciales déposées de
leurs sociétés respectives.
•
Enfin, les symboles “™” et “®” ne sont pas mentionnés
systématiquement dans le présent mode d’emploi.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Pré p a ra t io n
Entretien
Précautions
• Nettoyez le châssis, le panneau et les commandes à l’aide
d’un chiffon doux légèrement imprégné d’une solution
détergente neutre. N’utilisez aucun type de tampon
abrasif, de poudre à récurer ou de solvant tel que de
l’alcool ou de la benzine.
• N’éraflez pas, ne touchez pas et ne tapotez pas l’écran
avec un ustensile acéré ou abrasif comme un stylo à bille
ou un tournevis. Vous risquez sinon de rayer le tube
image.
• Nettoyez l’écran avec un chiffon doux. Si vous employez
un liquide de nettoyage pour vitres, n’utilisez aucun type
de nettoyant contenant une solution antistatique ou des
additifs similaires, car vous risqueriez de rayer le
revêtement de l’écran.
Installation
• Assurez une circulation d’air adéquate afin d’éviter toute
surchauffe interne. Ne placez pas l’appareil sur des
surfaces textiles (tapis, couvertures, etc.) ni à proximité de
tissus (rideaux, draperies) qui risquent d’obstruer les
orifices de ventilation.
• N’installez pas l’appareil à proximité de sources de
chaleur telles que des radiateurs ou des conduits d’air
chaud et ne le soumettez pas au rayonnement direct du
soleil, à de la poussière ou à de l’humidité en excès, ni à
des vibrations mécaniques ou à des chocs.
• Ne placez pas le moniteur à proximité d’appareils
générant un champ magnétique comme un convertisseur
ou des lignes à haute tension.
Transport
• Pour transporter ce moniteur, saisissez fermement le bas
de l’écran des deux mains. En laissant tomber le moniteur,
vous risquez de vous blesser ou d’endommager le
moniteur.
• Pour transporter l’appareil en vue d’une réparation ou de
son expédition, remballez-le dans le carton et les
matériaux de conditionnement d’origine.
Manipulation de l’écran LCD
• Despointslumineux(rouges,bleusouverts)peuvent
apparaîtresurl’écranLCD.Ilnes’agitpasd’un
dysfonctionnement.L’écranLCDestfabriquéen
faisantappelàdestechnologiesdehauteprécisionet
plusde99,99%desélémentsd’imagesontintacts.Il
estcependantpossiblequecertainsélémentsd’image
n’apparaissentpasouquecertainsélémentsd’image
apparaissentdemanièreconstante.
• Ne laissez pas l’écran LCD orienté vers le soleil, car vous
risqueriez de lui causer des dommages. Prenez donc
garde lorsque vous placez le moniteur à côté d’une
fenêtre.
Avertissement sur le raccordement à la
source d’alimentation
• Utilisez un cordon d’alimentation approprié à votre
source d’alimentation (secteur) locale.
PourlesclientsauxEtats-Unis
Si vous n’utilisez pas le câble approprié, ce moniteur ne
sera pas conforme à la réglementation FCC en vigueur.
Pour les clients au Royaume-Uni
Si vous employez le moniteur au Royaume-Uni, utilisez le
câble et la fiche prévus pour le Royaume-Uni (UK).
• N’appuyez pas et n’éraflez pas l’écran LCD. Ne posez pas
d’objets lourds sur l’écran LCD. Cela risque d’altérer
l’uniformité de l’écran.
• Si le moniteur est employé dans un endroit froid, il se
peut qu’une image résiduelle apparaisse à l’écran. Il ne
s’agit pas d’un dysfonctionnement. Lorsque le moniteur
se sera échauffé, l’écran reviendra à la normale.
• Si une image fixe reste affichée longtemps, il est possible
qu’une image résiduelle apparaisse. Cette image
résiduelle disparaîtra au bout d’un certain temps.
• L’écran et le châssis s’échauffent en cours de
fonctionnement. Il ne s’agit pas d’un dysfonctionnement.
Exemples de fiches
pour 100 à 120 V CA
pour 200 à 240 V CA pour 240 V CA
uniquement
Remplacement du tube fluorescent
La prise d’alimentation (secteur) doit se trouver à
proximité de l’appareil et être aisément accessible.
Un tube fluorescent spécial sert de source lumineuse pour
ce moniteur. Si l’écran LCD s’assombrit, devient instable ou
ne se met pas sous tension, remplacez le tube fluorescent.
Pour le remplacement du tube fluorescent, consultez votre
revendeur Sony.
Elimination du moniteur
• N’éliminez pas ce moniteur avec les déchets ordinaires.
Ne jetez pas ce moniteur avec les ordures ménagères.
• Le tube fluorescent contient du mercure. Eliminez ce
moniteur conformément aux réglementations des
autorités sanitaires locales.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Pré p a ra t io n
Identification des composants et
des commandes
Pour plus de détails, reportez-vous aux pages indiquées
entre parenthèses.
Arrière
Avant
1
2
POWER
MENU
3
8
4
AUTO
5
6
7
9
FR
*
!º
7 Co m m u t a t e u r d ’e n t ré e e t in d ica t e u r …1, 2
(p a g e 8)
1 Co m m u t a t e u r e t in d ica t e u r u
(a lim e n t a t io n ) (p a g e s 8, 17)
Sélectionne le signal d’entrée de …1 ou …2. Chaque
fois que vous appuyez sur cette touche, l’entrée alterne
et l’indicateur correspondant s’allume.
Mise sous ou hors tension du moniteur.
L’indicateur s’allume en vert lorsque le moniteur est
sous tension. Il clignote en vert et en orange ou s’allume
en orange lorsque le moniteur se trouve en mode
d’économie d’énergie.
8 Co m m u t a t e u r POWER (a lim e n t a t io n
p rin cip a le ) (p a g e 8)
Pour mettre l’appareil sous tension, appuyez sur le côté
“–”. Pour le mettre hors tension, appuyez sur le côté
“®”.
2 To u ch e MENU (p a g e s 9 – 16, 19)
Affichage de l’écran MENU (écrans de menu).
3 To u ch e ¨ (lu m in o sit é ) (˘) (p a g e s 9 – 16)
9 Co n n e ct e u rs d ’e n t ré e …1/…2 (HD15)
(p a g e s 6, 8)
Réglage de la luminosité de l’image.
Sert de touche ˘ pour sélectionner des paramètres de
menu.
Entrée des signaux vidéo RGB analogiques (0,714 Vcc,
positif) et des signaux SYNC.
4 To u ch e > (co n t ra st e ) (≥) (p a g e s 9 – 16)
!º Co n n e ct e u r AC IN (p a g e 6)
Assure l’alimentation CA du moniteur depuis la prise
murale.
Réglage du contraste de l’image.
Sert de touche ≥ pour sélectionner des paramètres de
menu.
* Ce connecteur est uniquement employé par le personnel
de service. Ne raccordez rien d’autre à cette prise.
5 To u ch e s +/– (ré g la g e ) (p a g e s 11 – 16)
Réglage des paramètres de menu sélectionnés.
6 To u ch e AUTO (p a g e 10)
Lorsque le signal de l’ordinateur est affiché sur ce
moniteur, appuyez sur la touche AUTO pour ajuster
automatiquement l’image à l’ordinateur.
Appuyez également sur cette touche si l’image n’est pas
centrée ou si elle est trouble.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Pré p a ra t io n
Raccordement à un ordinateur Macintosh
Installation
Utilisez l’adaptateur Macintosh fourni.
Avant d’utiliser ce moniteur, vérifiez si vous avez bien reçu
les accessoires suivants :
• Moniteur LCD (1)
• Couvercle arrière (1)
• Cordon d’alimentation (1)
vers …1 ou …2
• Câble de signal vidéo HD15 (1)
• Adaptateur Macintosh (1)
• Windows Monitor Information Disk/Utility Disk (1)
• Macintosh Utility Disk (1)
• Carte de garantie (1)
Ordinateur
Macintosh
ou compatible
Câble de signal
vidéo HD15
(fourni)
vers la sortie du
moniteur
• Ce mode d’emploi (1)
1re étape : Raccordez le moniteur à
l’ordinateur
Adaptateur Macintosh
(fourni)*
*
Raccordez l’adaptateur Macintosh fourni à l’ordinateur avant de
brancher le câble. Cet adaptateur est compatible avec les
ordinateurs Macintosh LC, Performa, Quadra, Power Macintosh
et Power Macintosh G3 (vendus avant janvier 1999). Si vous
raccordez un ordinateur Power Macintosh G3 vendu après
janvier 1999, vous devez utiliser un autre type d’adaptateur (non
fourni). Les ordinateurs Macintosh II et certaines anciennes
versions de PowerBook peuvent nécessiter un adaptateur doté
de microcommutateurs (non fourni).
Eteignez le moniteur et l’ordinateur avant d’effectuer le
raccordement.
Raccordement à un ordinateur IBM PC/AT ou
compatible
2e étape : Branchez le cordon
d’alimentation
vers …1 ou …2
Moniteur et ordinateur étant hors tension, branchez une
extrémité du cordon d’alimentation au moniteur et l’autre
extrémité à une prise de courant.
Ordinateur
IBM PC/AT ou
Câble de signal
vers la sortie du
compatible
vidéo HD15
(fourni)
moniteur
vers AC IN
Si vo t re PC n ’e st p a s co m p a t ib le Plu g & Pla y
(DDC2B e t DDC2Bi)
Ce moniteur utilise la broche n° 9 du connecteur de signal vidéo
pour la compatibilité Plug & Play (DDC2B et DDC2Bi). Reportez-
vous à la page 20 pour connaître l’emplacement de la broche n° 9.
vers une prise
murale
Cordon
d’alimentation
(fourni)
•
Si votre ordinateur accepte la broche n° 9, utilisez le câble de
signal vidéo HD15 fourni.
•
Si votre ordinateur n’accepte pas la broche n° 9, demandez
conseil auprès de votre distributeur pour obtenir l’adaptateur
HD15.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Pré p a ra t io n
3 Tournezlavispourfixerlecouverclearrière.
3e étape: Fixation du couvercle arrière
Lorsque vous avez raccordé l’ordinateur et le cordon
d’alimentation, installez le couvercle arrière fourni.
Maintenez l’écran bien verticalement lorsque vous fixez le
couvercle arrière.
1 Accrochezlecâbled’ordinateuretlecordon
d’alimentation.
Déverrouillé
Verrouillé
FR
Inclinaison du moniteur
2 Appuyezledessusducouverclearrièrecontrele
dessusdelapartiepermettantd’attacherle
couvercle,puisengagezlecouverclearrière.
La fonction d’inclinaison vous permet d’ajuster le moniteur
de 30° vers le haut et de 45° vers la gauche ou la droite.
Vous obtiendrez les meilleurs résultats en inclinant l’écran
de 5° ou plus vers le haut.
Pour faire pivoter le moniteur, saisissez-le des deux mains
par le bas comme illustré ci-dessous.
1
2
30°
45°
45°
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Pré p a ra t io n
Po u r le s u t ilisa t e u rs d e Win d o w s NT4.0
L’installation du moniteur sous Windows NT4.0 est différente de
celle sous Windows 95/98 et n’implique pas la sélection du type de
moniteur. Reportez-vous au mode d’emploi de Windows NT4.0
pour plus de détails sur le réglage de la résolution, le taux de
régénération et le nombre de couleurs.
Mise sous tension du moniteur et
de l’ordinateur
1 Appuyezsurlecôté“–”ducommutateurPOWER.
POWER
Ré g la g e d e la ré so lu t io n d u m o n it e u r e t d u
n o m b re d e co u le u rs
Ajustez la résolution du moniteur et le nombre de couleurs en vous
référant au mode d’emploi de votre ordinateur. Le nombre de
couleurs peut varier en fonction de votre ordinateur ou de votre
carte graphique. Le réglage de la palette de couleurs et le nombre
réel de couleurs se présentent comme suit:
•
•
High Color (16 bit) n 65.536 couleurs
True Color (24 bit) n environ 16,77 millions de couleurs
2 Appuyezsurlecommutateur u.
En mode True Color (24 bit), la vitesse peut être inférieure.
Sélection du signal d’entrée
Vous pouvez raccorder deux ordinateurs à ce moniteur à
l’aide des connecteurs HD 15. Pour passer d’un ordinateur à
l’autre, utilisez la touche ….
3 Mettezl’ordinateursoustension.
L’installation de votre moniteur est terminée.
Au besoin, utilisez les commandes du moniteur pour ajuster
l’image.
Ordinateurs
Si aucune image n’apparaît à l’écran
raccordé à …2
•
•
Assurez-vous que le moniteur est bien branché à l’ordinateur.
Si NO INPUT SIGNAL apparaît à l’écran, essayez de modifier le
signal d’entrée et vérifiez que la carte graphique de l’ordinateur
est bien logée dans la fente de bus adéquate.
raccordé à …1
•
Si vous remplacez un ancien moniteur par ce modèle et que
OUT OF SCAN RANGE apparaît à l’écran, rebranchez l’ancien
moniteur. Puis, ajustez la carte graphique de l’ordinateur de
sorte que la fréquence horizontale soit comprise entre 30 et 92
kHz et la fréquence verticale entre 40 et 85 Hz, et que la
résolution soit de 1280 x 1024 ou moins.
Appuyezsurlatouche ….
Le signal d’entrée et l’indicateur d’entrée correspondant
changent à chaque fois que vous appuyez sur cette touche.
Pour plus d’informations concernant les messages sur écran,
reportez-vous à “Symptômes et remèdes aux problèmes” à la page
18.
Po u r le s clie n t s u t ilisa n t Win d o w s 95/98
Pour maximaliser le potentiel de votre moniteur, installez sur votre
ordinateur le nouveau fichier d’informations modèle depuis la
disquette “Windows Monitor Information Disk/Utility Disk”.
Ce moniteur est conforme à la norme Plug & Play “VESA DDC”. Si
votre PC/carte graphique est conforme à la norme DDC,
sélectionnez “Plug & Play Monitor (VESA DDC)” ou la désignation
de ce moniteur comme type de moniteur dans le “Control Panel”
sous Windows 95/98. Si votre PC/carte graphique a des difficultés
à communiquer avec ce moniteur, chargez la disquette “Windows
Monitor Information Disk/Utility Disk” et sélectionnez la
désignation de ce moniteur comme type de moniteur.
Re m a rq u e
Si vous redémarrez l’ordinateur que vous désirez utiliser pour
visualiser, ou que cet ordinateur est en mode d’économie d’énergie,
il se peut que le moniteur passe automatiquement au signal de
l’autre connecteur. Si cela se produit, sélectionnez manuellement le
signal désiré à l’aide de la touche ….
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Personnalisation du moniteur
Avant le réglage
Sélection de la langue
Raccordez le moniteur et l’ordinateur et mettez-les sous
tension.
Pour obtenir les meilleurs résultats, attendez au moins
30 minutes avant de procéder aux réglages.
d’affichage à l’écran
Pour l’affichage des menus, vous avez le choix entre les
langues suivantes : anglais, français, allemand, espagnol,
italien et japonais.
Présentation du système d’écrans
de menu
1 Appuyez sur la touche MENU.
L’écran MENU apparaît.
MENU
MENU
EXIT
OK
La plupart des réglages sont effectués via l’écran MENU.
Pour changer la langue d’affichage à l’écran, reportez-vous
à la section de “Sélection de la langue d’affichage à l’écran”.
MENU
PHASE
PITCH
CENTER
MENU
MENU
OK
ZOOM/SMOOTHING
COLOR
LANGUAGE
OPTION
QUITTER
PHASE
HORLOGE
CENTRAGE
ZOOM/SMOOTHING
COULEUR
LANGUAGE
OPTION
2 Appuyez sur les touches ˘/≥ pour sélectionner
LANGUAGE et appuyez ensuite sur la touche MENU.
Le menu LANGUAGE apparaît.
FR
QUITTER
LANGUAGE
MENU
Referme l’écran MENU.
ENGLISH
FRANÇAIS
PHASE
DEUTSCH
Affiche l’écran PHASE. Réglez la phase lorsque les
caractères ou les images apparaissent flous sur toute la
surface de l’écran. Réglez la phase après avoir réglé le pas.
ESPAÑOL
ITALIANO
HORLOGE
Affiche l’écran HORLOGE. Réglez l’horloge lorsque les
caractères ou les images ne sont pas clairs à certains endroits
de l’écran.
3 Appuyez sur les touches ˘/≥ pour sélectionner la
langue de votre choix et appuyez ensuite sur la
touche MENU.
L’écran MENU de la langue sélectionnée apparaît.
CENTRAGE
MENU
MENU
OK
MENU
Affiche l’écran CENTRAGE pour le réglage du centrage de
l’image.
QUITTER
PHASE
HORLOGE
CENTRAGE
ZOOM/SMOOTHING
ZOOM/SMOOTHING
COULEUR
LANGUAGE
OPTION
Affiche l’écran ZOOM/SMOOTHING afin d’ajuster la
netteté de l’image en fonction du rapport d’écran du signal
d’entrée ou de la résolution.
COULEUR
Affiche l’écran COULEUR pour le réglage de la température
de couleur.
L’écran disparaît automatiquement au bout d’environ 30
secondes.
Pour refermer l’écran, appuyez à nouveau sur la touche
MENU.
LANGUAGE
Affiche l’écran LANGUAGE pour la sélection de la langue
d’affichage à l’écran.
OPTION
Affiche l’écran OPTION. Vous pouvez régler les paramètres
tels que le rétro-éclairage, la position des écrans de menu, le
délai d’activation du mode d’économie d’énergie et le
verrouillage des commandes.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Pe rso n n a lisa t io n d u m o n it e u r
Réglage automatique de l’image
Elimination manuelle du
scintillement ou du flou
Si l’image devient scintillante ou floue, appuyez sur la
touche AUTO. Le moniteur se règle automatiquement en
fonction du signal de l’ordinateur raccordé.
Certains ordinateurs peuvent requérir d’autres réglages fins.
Dans ce cas, procédez au réglage manuel du moniteur.
Si une partie de l’écran scintille ou est floue, appuyez sur la
touche AUTO. Si cette opération ne donne aucun résultat,
ajustez le Pas et la Phase comme suit.
Une fois que le pas et la phase sont réglés, ils seront
mémorisés pour le signal d’entrée en cours.
1 Mettez le moniteur sous tension.
2 Mettez l’ordinateur sous tension.
1 Réglez la résolution de l’ordinateur sur 1280 × 1024.
Si la résolution de la carte graphique est inférieure à
1280 × 1024, réglez ZOOM sur REAL (page 12).
3 Appuyez sur la touche AUTO.
Le moniteur ajuste le pas en fonction du signal d’entrée
de sorte que l’image s’affiche de manière nette et adapte
l’image au centre de l’écran.
2 Insérez la disquette Utility Disk.
Utilisez la disquette appropriée en fonction de votre
ordinateur.
Pour Windows 95/98
Windows Monitor Information Disk/Utility Disk
Pour Macintosh
AUTO
Macintosh Utility Disk
3 Lancez la disquette Utility Disk et affichez le modèle
de test.
Pour Windows 95/98
Cliquez sur [Utility Disk] n[Windows] n[Utility.exe].
Pour Macintosh
Cliquez sur [Utility Disk] n[SONY-Utility].
Re m a rq u e s
•
Cette fonction est destinée à être utilisée avec un ordinateur
tournant sous Windows ou un logiciel d’interface graphique
utilisateur similaire fournissant une image plein écran. Elle peut
ne pas fonctionner correctement si la couleur d’arrière-plan est
foncée ou si l’image d’entrée ne remplit pas l’écran jusqu’aux
bords (comme une invite MS-DOS).
4 Appuyez sur la touche MENU.
L’écran MENU apparaît.
MENU
MENU
OK
MENU
QUITTER
PHASE
•
L’affichage à l’écran peut être désactivé pendant quelques
secondes pendant l’exécution de la fonction de réglage
automatique de la taille de l’image. Il ne s’agit pas d’un
dysfonctionnement.
HORLOGE
CENTRAGE
ZOOM/SMOOTHING
COULEUR
LANGUAGE
OPTION
Si l’image scintille ou s’il elle est floue même
après que vous avez appuyé sur la touche AUTO
5 Appuyez sur les touches ˘/≥ pour sélectionner
HORLOGE et appuyez ensuite à nouveau sur la
touche MENU.
Ajustez le Pas et la Phase en vous référant à “Elimination
manuelle du scintillement ou du flou.”
L’écran de menu HORLOGE apparaît.
Si l’image n’est pas au centre de l’écran même
après que vous avez appuyé sur la touche AUTO
HORLOGE
MENU
Utilisez l’écran du menu CENTRAGE pour effectuer
l’ajustement en vous référant à “Réglage de la position de
l’image.”
0
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Pe rso n n a lisa t io n d u m o n it e u r
6 Appuyez sur les touches +/– jusqu’à ce que les
couleurs de l’écran se soient uniformisées.
Effectuez le réglage de sorte que les bandes verticales
disparaissent.
Réglage de la position de l’image
Si l’image ne se trouve pas au centre de l’écran, appuyez sur
la touche AUTO. Si cette opération reste sans effet, réglez le
centrage en procédant comme suit.
Le réglage du centrage est enregistré dans la mémoire pour
le signal d’entrée en cours.
1 Lancez le Utility Disk et affichez le modèle de test.
Effectuez les étapes 2 et 3 de “Elimination manuelle du
scintillement ou du flou.”
2 Appuyez sur la touche MENU.
L’écran MENU apparaît.
MENU
MENU
OK
QUITTER
PHASE
7 Appuyez sur la touche MENU.
L’écran MENU apparaît.
MENU
HORLOGE
CENTRAGE
ZOOM/SMOOTHING
COULEUR
LANGUAGE
OPTION
Si vous observez des lignes horizontales sur la totalité de
l’écran, procédez au réglage de la phase à l’étape
suivante.
8 Appuyez sur les touches ˘/≥pour sélectionner
PHASE et appuyez ensuite à nouveau sur la touche
MENU.
FR
3 Appuyez sur les touches ˘/≥ pour sélectionner
CENTRAGE et appuyez ensuite à nouveau sur la
touche MENU.
L’écran de menu PHASE apparaît.
CENTRAGE
PHASE
L’écran de menu CENTRAGE
MENU
apparaît.
H
V
MENU
4
26
9 Appuyez sur les touches +/– jusqu’à ce que les
couleurs de l’écran se soient uniformisées.
Effectuez le réglage jusqu’à ce que les bandes
horizontales soient réduites au minimum.
4 Déplacez l’image vers le haut, vers le bas, vers la
gauche ou vers la droite jusqu’à ce que le cadre à la
périphérie du modèle de test disparaisse.
Pour régler le centrage horizontal, sélectionnez H à
l’aide des touches ˘/≥ et ajustez la position au
moyen des touches +/–.
+ . . .pour déplacer l’image vers la droite.
– . . .pour déplacer l’image vers la gauche.
CENTRAGE
H
V
26
10Lorsque vous avez terminé, cliquez sur [END] à l’écran
de façon à désactiver la mire de test.
L’affichage sur écran disparaît automatiquement au bout de
30 secondes.
Suite page suivante
Pour fermer l’affichage sur écran, appuyez deux fois sur la
touche MENU.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Pe rso n n a lisa t io n d u m o n it e u r
Pour régler le centrage vertical, sélectionnez V à
l’aide des touches ˘/≥ et ajustez la position au
moyen des touches +/–.
Réglage du contraste
+ . . .pour déplacer l’image vers le haut.
– . . .pour déplacer l’image vers le bas.
Le réglage du contraste est enregistré dans la mémoire pour
tous les signaux d’entrée reçus.
CENTRAGE
1 Appuyez sur la touche > (contraste) ≥.
H
V
L’écran de menu CONTRASTE apparaît.
CONTRASTE
26
26
5 Lorsque vous avez terminé, cliquez sur [END] à l’écran
48. 4kHz / 60Hz
de façon à désactiver la mire de test.
L’écran de menu disparaît automatiquement au bout
d’environ 30 secondes.
Pour fermer l’affichage sur écran, appuyez deux fois sur la
touche MENU.
Fréquence
horizontale* verticale*
Fréquence
2 Appuyez sur les touches +/–.
+ . . . pour augmenter le contraste.
– . . . pour diminuer le contraste.
Réglage de la luminosité de
l’image
Le réglage de luminosité est enregistré dans la mémoire
pour tous les signaux d’entrée reçus.
L’écran disparaît automatiquement après environ 3
secondes.
1 Appuyez sur la touche ¨ (luminosité) ˘.
*
Les fréquences horizontale et verticale pour le signal d’entrée
reçu apparaissent dans l’écran CONTRASTE.
L’écran de menu LUMINOSITE apparaît.
LUMINOSITE
Modification de la taille de
l’image en fonction du signal
26
48. 4kHz / 60Hz
Le moniteur est réglé en usine pour afficher l’image
complète à l’écran, quels que soient le mode d’image et la
résolution. Vous pouvez également visualiser l’image à son
rapport d’écran et à sa résolution réels. Attention que les
signaux d’une résolution de 1280 × 1024 remplissent toute la
surface de l’écran et que la fonction ZOOM est alors
inopérante.
Fréquence
horizontale* verticale*
Fréquence
2 Appuyez sur les touches +/–.
+ . . . pour augmenter la luminosité.
– . . . pour diminuer la luminosité.
Dès que le zoom est réglé, il sera réglé en mémoire pour le
signal d’entrée en cours.
FULL 1
Le signal d’entrée est affiché complètement à l’écran,
quels que soient le mode d’image et la résolution.
FULL 2
L’écran disparaît automatiquement après environ 3
secondes.
Le signal d’entrée est affiché à l’écran selon son rapport
d’écran réel. Par conséquent, des bandes noires peuvent
apparaître en haut et en bas de l’image en fonction du
*
Les fréquences horizontale et verticale pour le signal d’entrée
reçu apparaissent dans l’écran LUMINOSITE.
signal.
REAL
Si l’écran est trop lumineux lorsque vous utilisez le
moniteur dans un endroit sombre
Le signal d’entrée est affiché sur l’écran avec sa résolution
réelle. (Les signaux Sub-SXGA sont affichés au centre de
l’écran entouré d’un cadre noir.)
Diminuez le réglage RETROECLAIRAGE (page 15).
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Pe rso n n a lisa t io n d u m o n it e u r
1 Appuyez sur la touche MENU.
STANDARD
MENU
MENU
OK
L’écran MENU apparaît.
Effet de lissage standard (effet de lissage présélectionné
en usine).
TEXT
QUITTER
PHASE
MENU
HORLOGE
CENTRAGE
Pour que les caractères apparaissent clairement (ce mode
convient pour les applications basées texte.)
GRAPHICS
ZOOM/SMOOTHING
COULEUR
Pour que les images apparaissent clairement (ce mode
convient pour les logiciels sur CD-ROM tels que les
photos ou illustrations.)
2 Appuyez sur les touches ˘/≥pour sélectionner
ZOOM/SMOOTHING et appuyez ensuite à nouveau
sur la touche MENU.
L’écran de menu ZOOM/SMOOTHING apparaît.
1 Appuyez sur la touche MENU.
L’écran MENU apparaît.
MENU
MENU
MENU
OK
QUITTER
PHASE
MENU
HORLOGE
ZOOM
ZOOM
/SMOOTHING
CENTRAGE
ZOOM/SMOOTHING
COULEUR
FULL1
FULL2
REAL
SMOOTHING
2 Appuyez sur les touches ˘/≥pour sélectionner
ZOOM/SMOOTHING et appuyez de nouveau sur la
touche MENU.
FR
L’écran ZOOM/SMOOTHING apparaît.
3 Appuyez sur les touches ˘/≥pour sélectionner
ZOOM.
MENU
ZOOM
/SMOOTHING
ZOOM
SMOOTHING
FULL1
FULL2
REAL
ZOOM
ZOOM
/SMOOTHING
FULL1
FULL2
REAL
SMOOTHING
4 Appuyez sur les touches +/– pour sélectionner le
mode souhaité.
3 Appuyez sur les touches ˘/≥pour sélectionner
SMOOTHING.
ZOOM
ZOOM
/
SMOOTHING
STANDARD
SMOOTHING
TEXT
L’écran de menu disparaît automatiquement au bout
d’environ 30 secondes.
Pour refermer l’écran, appuyez deux fois sur la touche
MENU.
GRAPHICS
4 Appuyez sur les touches +/– pour sélectionner le
mode souhaité.
Pour afficher l’image sur la totalité de l’écran
Sélectionnez “FULL 1” à l’étape 4.
Si l’image affichée en mode FULL 1 ou
FULL2 n’est pas lisse
L’écran disparaît automatiquement après 30 secondes.
Pour refermer l’écran, appuyez deux fois sur la touche
MENU.
Utilisez la fonction de lissage d’image. L’effet de lissage
devient plus fort dans l’ordre TEXT n STANDARD n
GRAPHICS. Attention que les signaux d’une résolution de
1280 × 1024 sont uniquement affichés en mode REAL et que
la fonction SMOOTHING est alors inopérante.
Une fois que le lissage est réglé, il sera conservé en mémoire
pour le signal d’entrée en cours.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Pe rso n n a lisa t io n d u m o n it e u r
Changement ou réglage de la
température de couleur
Changement de la position
d’affichage des écrans de menu
La température de couleur est réglée par défaut sur 9300K.
Vous pouvez changer la température de couleur sur 6500K
ou 5000K. Utilisez cette fonction pour régler la température
de couleur de façon à ce que l’image corresponde aux
couleurs réelles d’une image imprimée.
Vous pouvez changer la position d’affichage des écrans de
menu (par exemple, si vous voulez régler l’image derrière
l’écran de menu).
1 Appuyez sur la touche MENU.
Le réglage de la température de couleur est enregistrée dans
la mémoire pour tous les signaux d’entrée reçus.
L’écran MENU apparaît.
MENU
MENU
OK
MENU
QUITTER
PHASE
1 Appuyez sur la touche MENU.
HORLOGE
CENTRAGE
MENU
MENU
OK
L’écran MENU apparaît.
ZOOM/SMOOTHING
COULEUR
LANGUAGE
OPTION
QUITTER
PHASE
MENU
HORLOGE
CENTRAGE
ZOOM/SMOOTHING
COULEUR
2 Appuyez sur les touches ˘/≥ pour sélectionner
OPTION et appuyez ensuite à nouveau sur la touche
MENU.
2 Appuyez sur les touches ˘/≥ pour sélectionner
COULEUR et appuyez ensuite à nouveau sur la
touche MENU.
L’écran de menu OPTION apparaît.
L’écran de menu COULEUR
apparaît.
COULEUR
OPTION
MENU
9300K
6500K
5000K
MENU
MODE UTILISATEUR
: 5SEC
: DEVERR
R
V
B
50
50
50
POSITION OSD H
3 Appuyez sur les touches ˘/≥pour sélectionner la
température de couleur.
3 Appuyez sur les touches ˘/≥pour sélectionner
Si vous devez procéder à d’autres réglages de la
température de couleur sélectionnée, passez à l’étape 4.
Si ce n’est pas nécessaire, appuyez sur la touche MENU.
L’écran MENU apparaît.
(POSITION OSD H) ou
Pour ajuster la position
horizontale
(POSITION OSD V).
Pour ajuster la position
verticale
OPTION
OPTION
4 Appuyez sur les touches ˘/≥pour sélectionner R
(rouge) ou B (bleu) et appuyez ensuite sur les
touches +/– pour obtenir la couleur voulue.
La couleur change suivant que la composante R ou B
augmente ou diminue par
: 5SEC
: 5SEC
: DEVERR
: DEVERR
COULEUR
rapport à V (vert).
POSITION OSD H
POSITION OSD V
9300K
6500K
5000K
4 Appuyez sur les touches +/– pour déplacer l’écran de
menu jusqu’à la position voulue.
MODE UTILISATEUR
R
V
B
50
50
50
L’écran de menu disparaît automatiquement au bout
d’environ 30 secondes.
Pour fermer l’affichage sur écran, appuyez deux fois sur la
touche MENU.
L’écran de menu OPTION disparaît automatiquement au
bout d’environ 30 secondes.
Pour fermer l’affichage sur écran, appuyez deux fois sur la
touche MENU.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Pe rso n n a lisa t io n d u m o n it e u r
Réglage du rétro-éclairage
Réglage du délai d’activation du
mode d’économie d’énergie
Si l’écran est trop lumineux lorsque vous employez le
moniteur dans un endroit sombre, réglez l’intensité du
rétro-éclairage.
Vous pouvez définir la durée avant laquelle le moniteur
passe en mode d’économie d’énergie. Reportez-vous à la
page 17 pour des informations plus détaillées sur les
possibilités d’économie d’énergie de ce moniteur.
1 Appuyez sur la touche MENU.
L’écran MENU apparaît.
MENU
MENU
OK
1 Appuyez sur la touche MENU.
MENU
QUITTER
PHASE
L’écran MENU apparaît.
MENU
MENU
OK
HORLOGE
CENTRAGE
ZOOM/SMOOTHING
COULEUR
MENU
QUITTER
PHASE
HORLOGE
CENTRAGE
ZOOM/SMOOTHING
COULEUR
LANGUAGE
OPTION
LANGUAGE
OPTION
2 Appuyez sur les touches ˘/≥pour sélectionner
OPTION et appuyez ensuite à nouveau sur la touche
MENU.
2 Appuyez sur les touches ˘/≥pour sélectionner
OPTION et appuyez ensuite à nouveau sur la touche
MENU.
L’écran de menu OPTION apparaît.
FR
OPTION
MENU
OPTION
L’écran de menu OPTION
apparaît.
MENU
: 5SEC
: DEVERR
: 5SEC
: DEVERR
POSITION OSD H
POSITION OSD H
3 Appuyez sur les touches ˘/≥pour sélectionner
ZZ...
3 Appuyez sur les touches ˘/≥pour sélectionner
(RETROECLAIRAGE).
(ECONOMIE TEMPO).
OPTION
OPTION
60MIN
1MIN
5SEC
NON
26
: DEVERR
RETROECLAIRAGE
ECONOMIE TEMPO
4 Appuyez sur les touches +/– pour régler le niveau
d’intensité lumineuse.
4 Appuyez sur les touches +/– pour sélectionner la
durée de votre choix.
L’écran de menu OPTION disparaît automatiquement au
bout d’environ 30 secondes.
Pour fermer l’affichage sur écran, appuyez deux fois sur la
touche MENU.
Lorsque ECONOMIE TEMPO est réglé sur NON, le
moniteur ne passe pas en mode d’économie d’énergie.
L’écran de menu OPTION disparaît automatiquement au
bout d’environ 30 secondes.
Pour fermer l’affichage sur écran, appuyez deux fois sur la
touche MENU.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Pe rso n n a lisa t io n d u m o n it e u r
Verrouillage des commandes
Réinitialisation des réglages
La fonction de blocage des commandes désactive toutes les
commandes sauf le commutateur u (alimentation), le
MENU et quelques autres touches du panneau frontal.
Vous pouvez réinitialiser tous les réglages et paramètres
aux valeurs par défaut.
La température de couleur est réinitialisée à 9300K, le
réglage du zoom en mode FULL 1 et le délai d’activation du
mode d’économie d’énergie à 5 secondes. Le verrouillage
des commandes est désactivé. Les autres réglages sont
restaurés aux valeurs par défaut. La langue d’affichage à
l’écran reste cependant inchangée.
Lorsque vous avez sélectionné “VERR”, vous ne pouvez
plus sélectionner que les paramètres suivants dans l’écran
MENU :
• QUITTER
• VERROU REGLAGES et RÉGLAGE D’USINE dans
l’écran de menu OPTION
1 Appuyez sur la touche MENU.
L’écran MENU apparaît.
MENU
MENU
OK
Si vous appuyez sur l’une des touches verrouillées, le
QUITTER
PHASE
MENU
symbole
apparaît sur l’écran.
HORLOGE
CENTRAGE
ZOOM/SMOOTHING
COULEUR
1 Appuyez sur la touche MENU.
L’écran MENU apparaît.
MENU
MENU
OK
QUITTER
PHASE
2 Appuyez sur les touches ˘/≥ pour sélectionner
OPTION et appuyez ensuite à nouveau sur la touche
MENU.
MENU
HORLOGE
CENTRAGE
ZOOM/SMOOTHING
COULEUR
L’écran de menu OPTION apparaît.
OPTION
2 Appuyez sur les touches ˘/≥ pour sélectionner
OPTION et appuyez ensuite à nouveau sur la touche
MENU.
MENU
L’écran de menu OPTION
apparaît.
OPTION
: 5SEC
: DEVERR
MENU
POSITION OSD H
: 5SEC
: DEVERR
3 Appuyez sur les touches ˘/≥pour sélectionner ?
3 Appuyez sur les touches ˘/≥pour sélectionner
(RÉGLAGE D’USINE).
(VERROU REGLAGES).
OPTION
OPTION
:
5SEC
OUI
DEVERR
VERR
RÉGLAGE D' USINE
VERROU REGLAGES
4 Appuyez sur la touche – pour sélectionner VERR.
4 Appuyez sur la touche +.
L’écran de menu OPTION disparaît
automatiquement au bout d’environ 30
secondes.
Pour fermer l’affichage sur écran, appuyez
deux fois sur la touche MENU.
L’écran de menu OPTION disparaît automatiquement au
bout d’environ 30 secondes.
Pour désactiver le verrouillage des commandes
Pour fermer l’affichage sur écran, appuyez deux fois sur la
touche MENU.
Appuyez sur la touche + à l’étape 4 pour sélectionner
DEVERR.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
In fo rm a t io n s co m p lé m e n t a ire s
Mode de consommation
d’énergie
Consommation
électrique
Indicateur
u
Modes présélectionnés et
utilisateur
1
2
Fonctionnement normal
Veille (1er mode)
≤ 48 W
Vert
≤ 15 W
Vert et orange
en alternance
Ce moniteur est doté de modes présélectionnés par défaut
pour les normes industrielles les plus fréquentes de manière
à garantir une véritable compatibilité “plug and play”
(“branchez et démarrez”).
(Reportez-vous à l’Appendix pour la liste des modes
présélectionnés en usine.)
3
4
Interruption (2e mode)
(veille)*
≤ 15 W
≤ 1 W
≤ 1 W
Vert et orange
en alternance
Inactif (3e mode)**
(veille profonde)*
Orange
5
6
Hors tension
Eteint
Eteint
Lorsqu’un nouveau signal est entré, le moniteur sélectionne
le mode présélectionné par défaut approprié et ajuste
momentanément l’étalonnage de la phase de façon à assurer
une haute qualité d’image au centre de l’écran. L’étalonnage
est enregistré dans la mémoire et est immédiatement
restauré chaque fois que le même signal est entré.
Pour les signaux d’entrée qui ne correspondent à aucun des
modes présélectionnés par défaut, la technologie Multiscan
numérique de ce moniteur procède à tous les réglages
requis pour assurer l’affichage d’une image claire sur
l’écran quelle que soit la synchronisation dans la plage de
fréquence du moniteur. Il peut cependant s’avérer
nécessaire de procéder à l’accord fin du centrage vertical/
horizontal. Appuyez simplement sur la touche AUTO ou
réglez le moniteur suivant les instructions de réglage. Les
réglages sont automatiquement mémorisés comme un mode
utilisateur et restaurés chaque fois que le signal d’entrée
correspondant est entré.
Mise hors tension principale 0 W
*
“Veille” et “Veille profonde” sont des modes d’économie
d’énergie définis par l’EPA américaine (Environmental
Protection Agency).
** Lorsque votre ordinateur passe en mode d’économie d’énergie,
le signal d’entrée est coupé et PAS ENTREE VIDEO apparaît à
l’écran. Une fois que le temps présélectionné dans “Modification
du délai d’économie d’énergie” (page 15) s’est écoulé, le
moniteur passe en mode d’économie d’énergie.
FR
Dépannage
Cette section peut vous aider à isoler la cause d’un
problème et, par conséquent, vous éviter de faire appel au
service technique.
Messages sur écran
Fonction d’économie d’énergie
S’il y a un problème avec le signal d’entrée, l’un des
messages suivants apparaît à l’écran. Pour résoudre le
problème, reportez-vous à “Symptômes et remèdes aux
problèmes” à la page 18.
Ce moniteur satisfait aux normes d’économie d’énergie
définies par VESA et ENERGY STAR ainsi qu’aux normes
NUTEK plus strictes.
Si le moniteur est raccordé à un ordinateur ou à une carte
graphique vidéo compatible avec VESA DPMS (Display
Power Management Signaling), le moniteur réduit
automatiquement sa consommation électrique en trois
phases comme indiqué ci-dessous.
INFORMATION
HORS PLAGE
DE BALAYAGE
Vous pouvez définir le délai d’activation du mode
d’économie d’énergie via les écrans de menu. Définissez la
durée suivant la procédure de “Réglage du délai
d’activation du mode d’économie d’énergie” à la page 15.
“HORS PLAGE DE BALAYAGE” indique que le signal
d’entrée n’est pas supporté par les spécifications
d’affichage.
“PAS ENTREE VIDEO” indique qu’aucun signal n’est entré
dans le moniteur.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
In fo rm a t io n s co m p lé m e n t a ire s
Symptômes et remèdes aux problèmes
Si le problème est provoqué par l’ordinateur raccordé ou tout autre appareil, veuillez vous reporter au mode d’emploi de
l’appareil raccordé.
Utilisez la fonction d’autodiagnostic (page 19) si les recommandations suivantes ne résolvent pas le problème.
Sym p t ô m e
Vé rifie z ce s é lé m e n t s
Absence d’image
Si l’indicateur u n’est pas
• Vérifiez que le cordon d’alimentation est bien raccordé.
allumé
• Vérifiez que le commutateur u (alimentation) est en position “on”.
Si le message “PAS ENTREE
VIDEO” apparaît à l’écran, ou si
l’indicateur u est orange ou
alterne entre le vert et l’orange
• Vérifiez que le câble du signal vidéo est bien raccordé et que toutes les fiches sont bien en
place dans leurs prises.
• Vérifiez que le réglage de sélection d’entrée est correct.
• Vérifiez que les broches du connecteur d’entrée vidéo HD15 ne sont ni pliées ni enfoncées.
pProblèmes provoqués par l’ordinateur raccordé ou un autre équipement
• L’ordinateur est en mode d’économie d’énergie. Tapez sur n’importe quelle touche du
clavier de l’ordinateur.
• Assurez-vous que l’ordinateur est sous tension.
• Assurez-vous que votre carte graphique est bien logée dans la fente de bus adéquate.
Si le message “HORS PLAGE
DE BALAYAGE” apparaît à
l’écran
pProblèmes provoqués par l’ordinateur raccordé ou un autre équipement
• Vérifiez que la plage de fréquence vidéo est conforme aux spécifications pour le moniteur. Si
vous avez remplacé un ancien moniteur par ce moniteur, rebranchez l’ancien moniteur et
ajustez la plage de fréquence conformément à ce qui suit.
Horizontale: 30 – 92 kHz, Verticale: 48 – 85 Hz
Si aucun message n’est affiché
et que l’indicateur u est vert ou
clignote en orange
• Utilisez la fonction d’auto-diagnostic (page 19).
Si vous utilisez Windows 95/98
• Si vous avez remplacé l’ancien moniteur par ce moniteur, rebranchez l’ancien moniteur et
procédez comme suit. Installez la disquette Windows Monitor Information Disk/Utility Disk
et sélectionnez “CPD-L181” parmi les moniteurs Sony dans l’écran de sélection des
moniteurs de Windows 95/98.
Si vous utilisez un système
Macintosh
• Vérifiez que l’adaptateur Macintosh et le câble de signal vidéo sont raccordés correctement
(page 6).
L’image scintille, bondit, oscille
ou est brouillée.
• Appuyez sur la touche AUTO. Si cette opération ne donne aucun résultat, ajustez le pas et la
phase (page 10).
• Isolez et éliminez les sources potentielles de champs électriques ou magnétiques telles que
d’autres moniteurs, les imprimantes laser, les ventilateurs électriques, l’éclairage fluorescent
ou les télévisions.
• Eloignez le moniteur des lignes électriques ou placez un écran magnétique à proximité du
moniteur.
• Essayez en branchant le moniteur dans une prise de courant différente, de préférence sur un
circuit différent.
• Essayez en tournant le moniteur de 90° vers la gauche ou vers la droite.
pProblèmes provoqués par l’ordinateur raccordé ou tout autre équipement
• Vérifiez le manuel de votre carte graphique pour voir si les réglages du moniteur sont bien
effectués.
• Vérifiez que le mode graphique (VESA, Macintosh 21" Color, etc.) et la fréquence du signal
d’entrée sont supportés par ce moniteur (Appendix). Même si la fréquence est comprise dans
la plage adéquate, certaines cartes graphiques peuvent avoir une impulsion de
synchronisation qui est trop étroite pour que le moniteur effectue la synchronisation
correctement.
• Ajustez le taux de rafraîchissement de l’ordinateur (fréquence verticale) pour obtenir la
meilleure image possible.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
In fo rm a t io n s co m p lé m e n t a ire s
Sym p t ô m e
Vé rifie z ce s é lé m e n t s
• Appuyez sur la touche AUTO. Si cette opération ne donne aucun résultat, réglez le pas et
la phase (page 10).
L’image est floue.
• Ajustez le contraste et la luminosité (page 12).
• Ajustez le contre-jour (page 15)
• Ajustez la luminosité (page 12).
L’image est sombre.
• Il faut quelques secondes pour que le moniteur chauffe après la mise sous tension. L’image
apparaîtra momentanément.
• Evitez l’utilisation de rallonges de câbles vidéo et/ou des partageurs vidéo.
• Vérifiez que toutes les fiches sont bien en place dans leurs prises.
L’image ressemble à une image
fantôme.
• Appuyez sur la touche AUTO (page 10).
• Ajustez la taille (page 12) ou le centrage (page 11). Sachez que certains modes vidéo ne
remplissent pas l’écran jusqu’au bord.
L’image n’est pas centrée ou
dimensionnée correctement.
• Ajustez le pas et la phase (page 10).
Une image ondulée ou
elliptique (moiré) est visible.
• Appuyez sur la touche AUTO. Si cette opération ne donne aucun résultat, réglez le pas et
la phase (page 10).
La couleur n’est pas uniforme.
• Ajustez la température des couleurs (page 14).
Le blanc n’a pas l’air d’être du
blanc.
FR
• Si le blocage des commandes est activé, mettez-le sur DEVERR (page 16).
Les touches du moniteur ne
fonctionnent pas.
Si les quatre barres de couleur apparaissent (blanc, rouge,
vert, bleu), c’est que le moniteur fonctionne correctement.
Rebranchez les câbles d’entrée (vidéo) et vérifiez le statut de
Fonction d’autodiagnostic
CCe moniteur est doté d’une fonction d’autodiagnostic. S’il
y a un problème avec votre moniteur ou votre (vos)
ordinateur(s), l’écran devient blanc et l’indicateur u
(alimentation) s’allume en vert ou clignote en orange. Si
l’indicateur u (alimentation) est allumé en orange, c’est que
l’ordinateur se trouve en mode d’économie d’énergie.
Appuyez sur une touche quelconque du clavier.
votre (vos) ordinateur(s).
Si les barres de couleur n’apparaissent pas, c’est
probablement parce qu’une anomalie s’est produite au
niveau du moniteur. Informez votre revendeur Sony agréé
de l’état du moniteur.
Si l’in d ica t e u r u (a lim e n t a t io n ) clig n o t e
e n o ra n g e
Appuyez sur le commutateur u (alimentation) pour
mettre le moniteur hors et puis sous tension.
Si l’indicateur u (alimentation) s’allume en vert, c’est que le
moniteur fonctionne correctement.
Indicateur u
(alimentation)
Si l’indicateur u (alimentation) clignote toujours, c’est
probablement parce qu’il y a une anomalie au niveau du
moniteur. Comptez le nombre de secondes entre les
clignotements oranges de l’indicateur u (alimentation) et
informez votre revendeur Sony agréé de l’état du moniteur.
Notez également la désignation du modèle et le numéro de
série de votre moniteur. Notez également la marque et le
modèle de votre ordinateur et de votre carte graphique.
Si l’in d ica t e u r u (a lim e n t a t io n ) e st
a llu m é e n ve rt
1 Débranchez le(s) câble(s) de signal vidéo.
2 Avant que le moniteur ne passe en mode d’économie
d’énergie, appuyez sur la touche + et maintenez-la
enfoncée pendant 2 secondes.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
In fo rm a t io n s co m p lé m e n t a ire s
La conception et les spécifications sont sujettes à
modifications sans préavis.
Affich a g e d e l’é cra n INFORMATION
Vous pouvez vérifier la désignation, le numéro de série et
l’année de fabrication de ce moniteur.
Attribution des broches …1/…2
Maintenez la touche MENU enfoncée pendant cinq
secondes.
L’écran de menu INFORMATION apparaît.
1
5 4 3 2
10 9 8
7
6
15 14 13 12 11
Exemple
Broche n° Signal
Broche n° Signal
INFORMATION
1
2
Rouge
8
Masse bleu
DDC + 5V*
Masse
Désignation
Vert (synchro
composite sur
le vert)
9
MODEL : CPD-L181
SER NO : 1234567
MANUFACTURED : 1999-52
Numéro de série
10
11
12
Semaine et année de
fabrication
ID (masse)
3
4
5
6
7
Bleu
Données bidirectionnelles
(SDA)*
ID (masse)
Masse DDC* 13
Masse rouge 14
Synchro H
Spécifications
Synchro V
Panneau LCD
Type de panneau : a-Si TFT Active
Masse vert
15
Données d’horloge (SCL)*
Matrix
*
Norme Display Data Channel (DDC) de VESA
Format de l’image : 18,1 pouces
(46 cm)
Format du signal d’entrée
Fréquence d’exploitation RVB*
fh: 30 – 92 kHz
fv: 48 – 85 Hz
Rendement des pixels 99,99 %
Résolution H: 1280 points max.
V: 1024 lignes max.
Puissance de raccordement
100 – 240 V CA, 50 – 60 Hz,
1,0 – 0,6 A
Consommation électrique
Max. 48 W
Dimensions (l/h/p)
Avec le support :
Approx. 468 × 422 × 207,5 mm
(18 1/2 × 16 5/8 × 8 1/4 po)
Moniteur uniquement :
Approx. 468 × 354,5 × 90 mm
(18 1/2 × 14 × 3 5/8 po)
Approx. 9 kg (19 lb 14 oz), support
compris
Masse
Plug & Play
Accessoires fournis
DDC/DDC2B/DDC2Bi
Voir page 6.
* Co n d it io n s d e syn ch ro n isa t io n h o rizo n t a le e t
ve rt ica le re co m m a n d é e s
La largeur de synchronisation horizontale doit être supérieure à
4,8% de la durée horizontale totale , soit 0,8 µsec., selon la valeur la
plus grande.
La largeur de suppression horizontale doit être supérieure à
2,5 µsec.
La largeur de la suppression verticale doit être supérieure à
450 µsec.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
INHALT
Vorbereitungen
Sicherheitsmaßnahmen ........................................................................................................4
Lage und Funktion der Teile und Bedienelemente .........................................................5
Anschließen des Geräts ........................................................................................................6
Einschalten des Monitors und des Computers ................................................................8
Auswählen des Eingangssignals ........................................................................................8
Einstellen des Monitors
Das Bildschirmmenüsystem................................................................................................9
Auswählen der Sprache für die Bildschirmanzeigen ......................................................9
Automatisches Einstellen des Bildes................................................................................10
Manuelles Korrigieren eines flimmernden oder verschwommenen Bildes...............10
Einstellen der Bildposition ................................................................................................11
Einstellen der Bildhelligkeit ..............................................................................................12
Einstellen des Kontrasts .....................................................................................................12
Ändern der Bildgröße je nach Signal ...............................................................................12
Ändern oder Einstellen der Farbtemperatur ..................................................................14
Ändern der Position der Bildschirmanzeigen ................................................................14
Einstellen der Hintergrundbeleuchtung .........................................................................15
Einstellen der Verzögerung für die Energiesparfunktion ............................................15
Sperren der Bedienelemente .............................................................................................16
Zurücksetzen der Einstellungen .......................................................................................16
DE
D
Weitere Informationen
Vordefinierte Modi und Benutzermodi...........................................................................17
Störungsbehebung ..............................................................................................................17
Technische Daten ................................................................................................................20
Appendix
Preset Mode Timing Table .................................................................................................. i
TCO’99 Eco-document ......................................................................................................... i
•
•
•
•
Macintosh ist ein Warenzeichen der Apple Computer, Inc., in den USA
und anderen Ländern.
Windows® und MS-DOS sind eingetragene Warenzeichen der
Microsoft Corporation in den USA und anderen Ländern.
IBM PC/AT und VGA sind eingetragene Warenzeichen der IBM
Corporation in den USA.
VESA ist ein Warenzeichen der Video Electronics Standard Association.
• ENERGY STAR ist ein eingetragenes Warenzeichen in den USA.
•
Alle anderen in diesem Handbuch erwähnten Warenzeichen oder
eingetragenen Warenzeichen sind Eigentum der jeweiligen
Unternehmen.
•
Im Handbuch sind die Warenzeichen und eingetragenen Warenzeichen
nicht in jedem Fall ausdrücklich durch “™” bzw. “®” gekennzeichnet.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Vo rb e re it u n g e n
Wartung
Sicherheitsmaßnahmen
• Reinigen Sie Gehäuse, Bedienfeld und Bedienelemente
mit einem weichen Tuch, das Sie leicht mit einem milden
Reinigungsmittel angefeuchtet haben. Verwenden Sie
keine Scheuermittel, Scheuerschwämme oder
Installation
• Achten Sie auf ausreichende Luftzufuhr, damit sich im
Gerät kein Wärmestau bildet. Stellen Sie den Monitor
nicht auf Oberflächen wie Teppichen oder Decken oder in
der Nähe von Materialien wie Gardinen und
Wandbehängen auf, die die Lüftungsöffnungen
blockieren könnten.
• Stellen Sie den Monitor nicht in der Nähe von
Wärmequellen wie Heizkörpern oder Warmluftauslässen
oder an Orten auf, an denen er direktem Sonnenlicht,
außergewöhnlich viel Staub, mechanischen Vibrationen
oder Stößen ausgesetzt ist.
Lösungsmittel wie Alkohol oder Benzin.
• Berühren Sie die Bildschirmoberfläche nicht mit scharfen,
rauhen oder spitzen Gegenständen wie zum Beispiel
Kugelschreibern oder Schraubenziehern. Andernfalls
könnte die Bildschirmoberfläche zerkratzt werden.
• Reinigen Sie den Bildschirm mit einem weichen Tuch.
Wenn Sie ein Glasreinigungsmittel verwenden, achten Sie
darauf, daß es keine Antistatik-Lösung oder ähnliche
Zusätze enthält, da diese zu Kratzern auf der
Beschichtung des Bildschirms führen könnten.
• Stellen Sie das Gerät nicht in der Nähe anderer Geräte auf,
die ein starkes Magnetfeld generieren, wie zum Beispiel
ein Transformator oder eine Hochspannungsleitung.
Transport
• Wenn Sie den Monitor transportieren, fassen Sie ihn mit
beiden Händen an der Unterseite des Gehäuses. Wenn Sie
den Monitor fallenlassen, könnten Sie sich verletzen, und
der Monitor könnte beschädigt werden.
Hinweise zum LCD-Bildschirm
• Wenn Sie den Monitor zur Reparatur oder bei einem
Umzug transportieren müssen, verpacken Sie ihn mit
Hilfe der Originalverpackungsmaterialien wieder im
Originalkarton.
• Helle Lichtpunkte (rot, blau oder grün) können auf
dem LCD-Bildschirm zu sehen sein. Dies ist keine
Fehlfunktion. Der LCD-Bildschirm wird in einer
Hochpräzisionstechnologie hergestellt, und der Anteil
der effektiven Bildpunkte liegt bei über 99,99 %. Es ist
jedoch möglich, daß einige Bildelemente gar nicht
oder einige Bildelemente ständig angezeigt werden.
• Stellen Sie das Gerät nicht so auf, daß der LCD-Bildschirm
auf die Sonne gerichtet ist. Andernfalls könnte der LCD-
Bildschirm beschädigt werden. Achten Sie darauf
besonders, wenn Sie den Monitor in der Nähe eines
Fensters aufstellen.
• Stoßen Sie nicht gegen den LCD-Bildschirm, und
zerkratzen Sie ihn nicht. Stellen Sie keine schweren
Gegenstände auf den LCD-Bildschirm. Andernfalls kann
die Gleichförmigkeit des Bildes gestört werden.
• Wenn Sie den Monitor in einer kalten Umgebung
benutzen, kann ein Nachbild auf dem LCD-Bildschirm zu
sehen sein. Dies ist keine Fehlfunktion. Sobald sich der
Monitor erwärmt, wird die Anzeige auf dem Bildschirm
wieder normal.
Warnhinweis zum Netzanschluß
• Verwenden Sie das für die Stromversorgung in Ihrem
Land geeignete Netzkabel.
Für Kunden in den USA
Wenn Sie kein geeignetes Netzkabel verwenden,
entspricht dieser Monitor nicht den obligatorischen FCC-
Standards.
Für Kunden in Großbritannien
Wenn Sie den Monitor in Großbritannien verwenden,
benutzen Sie bitte das mitgelieferte Kabel mit dem für
Großbritannien geeigneten Stecker.
Beispiele für Steckertypen
• Wenn Sie über längere Zeit ein Standbild anzeigen lassen,
kann ein Nachbild erscheinen. Dieses Nachbild
verschwindet nach einer Weile wieder.
für 100 bis 120 V
Wechselstrom
für 200 bis 240 V
Wechselstrom
nur für 240 V
Wechselstrom
• Bildschirm und Gehäuse erwärmen sich bei Betrieb. Dies
ist keine Fehlfunktion.
Die Netzsteckdose sollte sich in der Nähe des Geräts
befinden und leicht zugänglich sein.
Austauschen der Leuchtstoffröhre
Entsorgen des Monitors
Eine spezielle Leuchtstoffröhre dient in diesem Monitor als
Lichtquelle. Wenn die Anzeige auf dem LCD-Bildschirm
dunkel oder instabil wird oder gar nicht mehr erscheint,
muß die Leuchtstoffröhre gegen eine neue ausgetauscht
werden. Wenden Sie sich dazu an Ihren Sony-Händler.
• Entsorgen Sie den Monitor nicht im Rahmen der
allgemeinen Müllabfuhr.
Der Monitor gehört nicht in den Hausmüll.
• Die Leuchtstoffröhre enthält Quecksilber. Entsorgen
Sie den Monitor in Übereinstimmung mit den lokalen
Müllentsorgungs- und Umweltschutzvorschriften.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Vo rb e re it u n g e n
Lage und Funktion der Teile und
Bedienelemente
Weitere Informationen finden Sie auf den in Klammern
angegebenen Seiten.
Vorderseite
Rückseite
1
2
POWER
MENU
3
8
4
AUTO
5
6
7
9
*
!º
DE
1 Ne t zsch a lt e r u n d -a n ze ig e u (Se it e 8, 17)
Zum Ein- und Ausschalten des Monitors.
Die Anzeige leuchtet grün, wenn der Monitor
eingeschaltet ist, und blinkt grün und orange bzw.
leuchtet orange, wenn sich der Monitor im
Energiesparmodus befindet.
7 Ein g a n g ssch a lt e r u n d -a n ze ig e …1, 2
(Se it e 8)
Zum Auswählen des Signals von Eingang …1 oder
…2. Mit jedem Tastendruck auf die Taste wechselt der
Eingang, und die entsprechende Anzeige leuchtet auf.
8 Ha u p t n e t zsch a lt e r POWER (Se it e 8)
Zum Einschalten der Hauptstromversorgung drücken
Sie die Seite “–”. Zum Ausschalten drücken Sie die Seite
“®”.
2 Ta st e MENU (Me n ü ) (Se it e 9 – 16, 19)
Zum Aufrufen des Menüs MENU.
3 Ta st e ¨ (He llig ke it ) (˘) (Se it e 9 – 16)
Zum Einstellen der Bildhelligkeit.
9 Ein g ä n g e …1/…2 (HD15) (Se it e 6, 8)
Zum Einspeisen von analogen RGB-Videosignalen
(0,714 Vp-p, positiv) und SYNC-Signalen.
Dient beim Auswählen von Menüoptionen als Taste ˘.
4 Ta st e > (Ko n t ra st ) (≥) (Se it e 9 – 16)
!º An sch lu ß AC IN (Se it e 6)
Zum Einstellen des Kontrasts.
Über diesen Anschluß wird der Monitor mit
Wechselstrom von der Netzsteckdose versorgt.
Dient beim Auswählen von Menüoptionen als Taste ≥.
5 Ta st e n +/– (Ein st e lle n ) (Se it e 11 – 16)
* Dieser Anschluß wird nur von Kundendienstpersonal
benutzt. Schließen Sie nichts daran an.
Zum Einstellen der ausgewählten Menüoption.
6 Ta st e AUTO (Se it e 10)
Wenn die Signale vom Computer auf diesem Monitor
angezeigt werden und Sie die Taste AUTO drücken,
wird das Bild automatisch auf den Computer
eingestellt.
Drücken Sie diese Taste außerdem, wenn das Bild nicht
zentriert oder verschwommen ist.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Vo rb e re it u n g e n
Anschließen an einen Macintosh-Computer
Anschließen des Geräts
Verwenden Sie den mitgelieferten Macintosh-Adapter.
Bevor Sie mit dem Monitor arbeiten, überprüfen Sie bitte, ob
folgende Teile mitgeliefert wurden:
• LCD-Monitor (1)
• Hintere Abdeckung (1)
• Netzkabel (1)
an …1 oder …2
• HD15-Videosignalkabel (1)
• Macintosh-Adapter (1)
• Windows Monitor Information Disk/Utility Disk (1)
• Macintosh Utility Disk (1)
• Garantiekarte (1)
• Diese Bedienungsanleitung (1)
Macintosh oder
Kompatibler
an
HD15-
Videosignalkabel
(mitgeliefert)
Monitorausgang
Schritt 1: Schließen Sie den Monitor an
den Computer an
Macintosh-Adapter
(mitgeliefert)*
*
Schließen Sie den mitgelieferten Macintosh-Adapter an den
Schalten Sie vor dem Anschließen den Monitor und den
Computer aus.
Computer an, bevor Sie das Kabel anschließen. Der Adapter ist
kompatibel mit Computern der Serien Macintosh LC, Performa,
Quadra, Power Macintosh und Power Macintosh G3 (vor Januar
1999 erworben). Wenn Sie den Monitor an einen Computer der
Serie Power Macintosh G3 anschließen, der nach Januar 1999
erworben wurde, benötigen Sie einen anderen Adapter (nicht
mitgeliefert). Bei Modellen der Serie Macintosh II und älteren
Power Book-Versionen ist möglicherweise ein Adapter mit
Mikroschaltern (nicht mitgeliefert) erforderlich.
Anschließen an einen IBM PC/AT oder
kompatiblen Computer
an …1 oder …2
Schritt 2: Schließen Sie das Netzkabel an
Schließen Sie bei ausgeschaltetem Monitor und Computer
das Netzkabel an den Monitor an, und stecken Sie den
Netzstecker in eine Netzsteckdose.
IBM PC/AT
oder
Kompatibler
HD15-
Videosignalkabel
(mitgeliefert)
an
Monitorausgang
an AC IN
We n n Ih r PC n ich t m it d e m Plu g & Pla y-St a n d a rd
(DDC2B u n d DDC2Bi) ko m p a t ib e l ist
an eine
Netzsteckdose
Dieser Monitor verwendet Stift Nr. 9 im Videosignalanschluß für
die Plug & Play-Kompatibilität (DDC2B und DDC2Bi). Die Position
von Stift Nr. 9 ist auf Seite 20 abgebildet.
Netzkabel
(mitgeliefert)
•
Wenn Ihr Computer den Stift Nr. 9 unterstützt, verwenden Sie
das mitgelieferte HD15-Videosignalkabel.
•
Wenn Ihr Computer den Stift Nr. 9 nicht unterstützt, benötigen
Sie einen HD15-Adapter. Wenden Sie sich bitte an Ihren
Händler.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Vo rb e re it u n g e n
3 Drehen Sie zum Befestigen der hinteren Abdeckung
die Schraube nach rechts.
Schritt 3: Anbringen der hinteren
Abdeckung
Bringen Sie nach dem Anschließen des Computers und des
Netzkabels die mitgelieferte hintere Abdeckung an.
Achten Sie darauf, den Bildschirm aufrecht zu halten, wenn
Sie die hintere Abdeckung anbringen.
1 Haken Sie das Computer- und das Netzkabel ein.
Gelöst
Angezogen
Neigen des Monitors
2 Drücken Sie die Oberkante der hinteren Abdeckung
gegen den Bereich oben, an dem die Abdeckung
angebracht wird, und drücken Sie die hintere
Abdeckung dann hinein.
DE
Mit der Neigevorrichtung können Sie den Monitor bis zu
einem Winkel von 30° neigen und bis zu 45° nach links oder
rechts drehen. Die beste Anzeigequalität erzielen Sie jedoch,
wenn Sie den Monitor um mindestens 5° nach oben neigen.
Stützen Sie den Monitor dazu bitte mit beiden Händen
unten ab, wie auf der Abbildung unten gezeigt.
1
2
30°
45°
45°
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Vo rb e re it u n g e n
Fü r Be n u t ze r vo n Win d o w s NT 4.0
Die Installation des Monitors unter Windows NT 4.0 ist anders als
unter Windows 95/98. So brauchen Sie z.B. den Monitortyp nicht
auszuwählen. Näheres zum Einstellen der Auflösung, der
Bildwiederholrate und der Anzahl der Farben finden Sie im
Benutzerhandbuch zu Windows NT 4.0.
Einschalten des Monitors und des
Computers
1 Drücken Sie die Seite “–” des Netzschalters POWER.
POWER
Ein st e lle n d e r Au flö su n g d e s Mo n it o rs u n d d e r
An za h l d e r Fa rb e n
Stellen Sie die Auflösung des Monitors und die Anzahl der Farben
anhand der Anweisungen im Benutzerhandbuch zu Ihrem
Computer ein. Die Anzahl der Farben kann je nach Computer oder
Grafikkarte variieren. Je nach der Einstellung unter “Farbpalette”
werden unterschiedlich viele Farben dargestellt:
•
•
High Color (16 Bit) n 65.536 Farben
True Color (24 Bit) n ca. 16,77 Mio. Farben
2 Drücken Sie den Schalter u.
Im True Color-Modus (24 Bit) kann sich die Geschwindigkeit
verringern.
Auswählen des Eingangssignals
Über die HD15-Anschlüsse können Sie zwei Computer an
diesen Monitor anschließen. Mit der Taste … schalten Sie
zwischen den beiden Computern um.
3 Schalten Sie den Computer ein.
Die Installation des Monitors ist damit abgeschlossen.
Stellen Sie gegebenenfalls das Bild mit den Bedienelementen
des Monitors nach Ihren Wünschen ein.
Computer
Wenn auf dem Bildschirm kein Bild erscheint
•
Überprüfen Sie, ob der Monitor korrekt an den Computer
angeschlossen ist.
an …2
angeschlossen
•
Wird NO INPUT SIGNAL auf dem Bildschirm angezeigt,
versuchen Sie, das Eingangssignal zu wechseln. Überprüfen Sie
gegebenenfalls, ob die Grafikkarte des Computers korrekt in den
richtigen Steckplatz eingebaut ist.
Wenn Sie einen älteren Monitor durch diesen Monitor ersetzt
haben und OUT OF SCAN RANGE auf dem Bildschirm
erscheint, schließen Sie den alten Monitor wieder an. Stellen Sie
dann die Grafikkarte des Computers auf eine
an …1
angeschlossen
Drücken Sie die Taste ….
•
Mit jedem Tastendruck wechseln das Eingangssignal und
die entsprechende Eingangsanzeige.
Horizontalfrequenz zwischen 30 und 92 kHz, eine
Vertikalfrequenz zwischen 40 und 85 Hz und eine Auflösung
von 1280 x 1024 oder niedriger ein.
Weitere Informationen zu den Bildschirmmeldungen finden Sie
unter “Fehlersymptome und Abhilfemaßnahmen” auf Seite 18.
Fü r Be n u t ze r vo n Win d o w s 95/98
Damit Sie den Monitor optimal nutzen können, installieren Sie die
Datei mit den neuen Modellinformationen von der mitgelieferten
Diskette “Windows Monitor Information Disk/Utility Disk” auf
Ihrem PC. Dieser Monitor entspricht dem Plug-and-Play-Standard
”VESA DDC”. Wenn Ihr PC bzw. Ihre Grafikkarte dem DDC-
Standard entspricht, geben Sie bitte “Plug & Play Monitor (VESA
DDC)” oder den Modellnamen dieses Monitors als Monitortyp in
der “Systemsteuerung” von Windows 95/98 an. Wenn bei der
Kommunikation zwischen Ihrem PC bzw. Ihrer Grafikkarte und
dem Monitor Probleme auftreten, legen Sie die Diskette “Windows
Monitor Information Disk/Utility Disk” ein, und wählen Sie den
Modellnamen dieses Monitors als Monitortyp aus.
Hin w e is
Wenn Sie den Computer, dessen Signal angezeigt werden soll, neu
starten oder wenn sich der Computer im Energiesparmodus
befindet, wählt der Monitor möglicherweise automatisch das Signal
des anderen Anschlusses aus. Wählen Sie das gewünschte Signal in
einem solchen Fall manuell mit der Taste … aus.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Einstellen des Monitors
OPTION
Vorbereitungen
Zum Aufrufen der Bildschirmanzeige OPTION. Hier
können Sie Optionen wie Hintergrundbeleuchtung, Position
der Bildschirmanzeigen, Tastensperrfunktion und
Verzögerung für die Energiesparfunktion einstellen.
Verbinden Sie den Monitor mit dem Computer, und
schalten Sie beide Geräte ein.
Die besten Ergebnisse erzielen Sie, wenn Sie mindestens
30 Minuten warten, bevor Sie Einstellungen
vornehmen.
Auswählen der Sprache für die
Bildschirmanzeigen
Das Bildschirmmenüsystem
Als Sprache für die Bildschirmanzeigen können Sie
Englisch, Französisch, Deutsch, Spanisch, Italienisch und
Japanisch auswählen.
Die meisten Einstellungen nehmen Sie über die
Bildschirmanzeige MENU vor.
Wie Sie die Sprache für die Bildschirmanzeigen wechseln,
erfahren Sie unter “Auswählen der Sprache für die
Bildschirmanzeigen”.
1 Drücken Sie die Taste MENU.
Die Bildschirmanzeige MENU erscheint.
MENU
MENU
ENDE
OK
MENU
MENU
EXIT
OK
MENU
PHASE
PITCH
BILDLAGE
ZOOM/SMOOTHING
FARBE
LANGUAGE
OPTION
PHASE
PITCH
CENTER
ZOOM/SMOOTHING
COLOR
LANGUAGE
OPTION
DE
ENDE
Zum Schließen der Bildschirmanzeige MENU.
2 Wählen Sie mit den Tasten ˘/≥ die Option
LANGUAGE aus, und drücken Sie die Taste MENU.
Die Bildschirmanzeige LANGUAGE erscheint.
PHASE
Zum Aufrufen der Bildschirmanzeige PHASE. Stellen Sie
die Phase ein, wenn die Zeichen oder Bilder auf dem
gesamten Bildschirm verschwommen erscheinen. Stellen Sie
die Phase nach dem Einstellen des Pitch ein.
LANGUAGE
MENU
ENGLISH
FRANÇAIS
DEUTSCH
ESPAÑOL
ITALIANO
PITCH
Zum Aufrufen der Bildschirmanzeige PITCH. Stellen Sie
den Pitch ein, wenn die Zeichen oder Bilder in einigen
Bereichen des Bildschirms nicht scharf erscheinen.
3 Wählen Sie mit den Tasten ˘/≥ die gewünschte
Sprache aus, und drücken Sie die Taste MENU.
Die Bildschirmanzeige MENU erscheint in der
ausgewählten Sprache.
BILDLAGE
Zum Aufrufen der Bildschirmanzeige BILDLAGE, mit der
Sie die Zentrierung des Bildes einstellen können.
MENU
MENU
OK
ZOOM/SMOOTHING
MENU
ENDE
Zum Aufrufen der Bildschirmanzeige ZOOM/
SMOOTHING, mit der Sie die Bildschärfe je nach
Bildseitenverhältnis oder Auflösung des Eingangssignals
einstellen können.
PHASE
PITCH
BILDLAGE
ZOOM/SMOOTHING
FARBE
LANGUAGE
OPTION
FARBE
Zum Aufrufen der Bildschirmanzeige FARBE, mit der Sie
die Farbtemperatur einstellen können.
Nach etwa 30 Sekunden wird die Bildschirmanzeige
automatisch ausgeblendet.
Sie können die Bildschirmanzeige jedoch auch ausblenden,
indem Sie die Taste MENU erneut drücken.
LANGUAGE
Zum Aufrufen der Bildschirmanzeige LANGUAGE, mit der
Sie die Sprache für die Bildschirmanzeigen auswählen
können.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Einstellen des Monitors
Automatisches Einstellen des
Bildes
Manuelles Korrigieren eines
flimmernden oder
verschwommenen Bildes
Wenn das Bild flimmert oder verschwommen ist, drücken
Sie die Taste AUTO. Der Monitor wird automatisch auf das
Signal des angeschlossenen Computers eingestellt.
Bei einigen Computern kann darüber hinaus noch eine
Feineinstellung erforderlich sein. Stellen Sie den Monitor in
diesem Fall erläutert von Hand ein.
Wenn ein Bereich des Bildschirms flimmert oder
verschwommen ist, drücken Sie die Taste AUTO. Wenn Sie
keine zufriedenstellenden Ergebnisse erzielen, stellen Sie
Signalabstand und Phase folgendermaßen ein.
Die Werte für Signalabstand und Phase, die Sie hier
einstellen, werden nur für das gerade eingespeiste
Eingangssignal gespeichert.
1 Schalten Sie den Monitor ein.
2 Schalten Sie den Computer ein.
1 Stellen Sie die Auflösung am Computer auf 1280 ×
1024 ein.
3 Drücken Sie die Taste AUTO.
Wenn die Auflösung der Grafikkarte niedriger ist als
1280 × 1024, setzen Sie ZOOM auf REAL (Seite 12).
Der Monitor stellt den Signalabstand so ein, daß er dem
Eingangssignal entspricht und das Bild scharf angezeigt
wird, und stellt das Bild in die Mitte des Bildschirms.
2 Legen Sie die Dienstprogrammdiskette ein.
Verwenden Sie die für Ihren Computer geeignete
Diskette.
AUTO
Bei Windows 95/98
Windows Monitor Information Disk/Utility Disk
Bei Macintosh
Macintosh Utility Disk
3 Starten Sie die Dienstprogrammdiskette, und rufen
Sie das Testmuster auf.
Bei Windows 95/98
Klicken Sie auf [Utility Disk] n [Windows] n
[Utility.exe].
Bei Macintosh
Klicken Sie auf [Utility Disk] n [SONY-Utility].
Hinweise
•
Diese Funktion ist speziell für Computer unter Windows oder
einer Software mit einer ähnlichen grafischen
Benutzeroberfläche konzipiert, bei der das Bild den ganzen
Bildschirm ausfüllt. Die Funktion arbeitet möglicherweise nicht
korrekt, wenn die Hintergrundfarbe dunkel ist oder das
eingespeiste Bild den Bildschirm nicht ganz ausfüllt, wie z. B.
die MS-DOS-Eingabeaufforderung.
4 Drücken Sie die Taste MENU.
Die Bildschirmanzeige MENU erscheint.
•
Während der automatischen Größeneinstellung wird
möglicherweise einige Sekunden lang ein leerer Bildschirm
angezeigt. Dies ist keine Fehlfunktion.
MENU
MENU
ENDE
OK
MENU
PHASE
PITCH
BILDLAGE
ZOOM/SMOOTHING
FARBE
LANGUAGE
OPTION
Wenn das Bild auch nach dem Drücken der Taste
AUTO noch flimmert oder verschwommen ist
Stellen Sie Signalabstand und Phase wie unter “Manuelles
Korrigieren eines flimmernden oder verschwommenen
Bildes” erläutert ein.
Wenn sich das Bild auch nach dem Drücken von
AUTO nicht in der Mitte des Bildschirms befindet
5 Wählen Sie mit den Tasten ˘/≥ die Option PITCH
aus, und drücken Sie die Taste MENU erneut.
Die Bildschirmanzeige PITCH erscheint.
Nehmen Sie die Einstellung mit der Bildschirmanzeige
BILDLAGE wie unter “Einstellen der Bildposition” erläutert
vor.
PITCH
MENU
0
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Einstellen des Monitors
6 Drücken Sie die Tasten +/–, bis die Bildschirmfarben
gleichmäßig sind.
Einstellen der Bildposition
Wenn sich das Bild nicht in der Mitte des Bildschirms
befindet, drücken Sie die Taste AUTO. Wenn Sie keine
zufriedenstellenden Ergebnisse erzielen, stellen Sie die
Zentrierung folgendermaßen ein.
Stellen Sie das Bild so ein, daß die vertikalen Streifen
verschwinden.
Der Wert für die Zentrierung, den Sie hier einstellen, wird
nur für das gerade eingespeiste Eingangssignal gespeichert.
1 Starten Sie die Dienstprogrammdiskette, und rufen
Sie das Testmuster auf.
Gehen Sie wie in Schritt 2 und 3 unter “Manuelles
Korrigieren eines flimmernden oder verschwommenen
Bildes” erläutert vor.
7 Drücken Sie die Taste MENU.
2 Drücken Sie die Taste MENU.
Die Bildschirmanzeige MENU erscheint.
Wenn auf dem gesamten Bildschirm horizontale Streifen
zu sehen sind, stellen Sie im nächsten Schritt die Phase
ein.
Die Bildschirmanzeige MENU erscheint.
MENU
MENU
OK
MENU
ENDE
PHASE
PITCH
BILDLAGE
ZOOM/SMOOTHING
FARBE
LANGUAGE
OPTION
8 Wählen Sie mit den Tasten ˘/≥ die Option PHASE
aus, und drücken Sie die Taste MENU erneut.
Die Bildschirmanzeige PHASE erscheint.
DE
PHASE
MENU
3 Wählen Sie mit den Tasten ˘/≥ die Option BILDLAGE
4
aus, und drücken Sie die Taste MENU erneut.
Die Bildschirmanzeige
BILDLAGE erscheint.
BILDLAGE
H
V
9 Drücken Sie die Tasten +/–, bis die Bildschirmfarben
gleichmäßig sind.
MENU
Stellen Sie das Bild so ein, daß die horizontalen Streifen
auf ein Minimum reduziert werden.
26
4 Verschieben Sie das Bild nach oben, unten, links oder
rechts, bis der Rahmen als äußere Begrenzung des
Testmusters verschwindet.
Bei der horizontalen Einstellung wählen Sie mit den
Tasten ˘/≥ die Option H aus und stellen die Position
mit den Tasten +/– ein.
+ . . .Das Bild wird nach rechts verschoben.
– . . . Das Bild wird nach links verschoben.
BILDLAGE
10Klicken Sie abschließend auf dem Bildschirm auf
[END]. Damit wird das Testmuster ausgeschaltet.
H
V
Nach etwa 30 Sekunden wird die Bildschirmanzeige
automatisch ausgeblendet.
26
Sie können die Bildschirmanzeige jedoch auch ausblenden,
indem Sie die Taste MENU zweimal drücken.
Fortsetzung
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Einstellen des Monitors
Bei der vertikalen Einstellung wählen Sie mit den
Tasten ˘/≥ die Option V aus und stellen die Position
mit den Tasten +/– ein.
Einstellen des Kontrasts
+ . . . Das Bild wird nach oben verschoben.
– . . . Das Bild wird nach unten verschoben.
Der Wert für den Kontrast, den Sie hier einstellen, wird für
alle eingespeisten Eingangssignale gespeichert.
BILDLAGE
1 Drücken Sie die Taste > (Kontrast) ≥.
H
V
Die Bildschirmanzeige KONTRAST erscheint.
KONTRAST
26
26
5 Klicken Sie abschließend auf dem Bildschirm auf
48. 4kHz / 60Hz
[END]. Damit wird das Testmuster ausgeschaltet.
Nach etwa 30 Sekunden wird die Bildschirmanzeige
automatisch ausgeblendet.
Horizontalfrequenz*
Vertikalfrequenz*
Sie können die Bildschirmanzeige jedoch auch ausblenden,
indem Sie die Taste MENU zweimal drücken.
2 Drücken Sie die Tasten +/–.
+ . . . Der Kontrast wird stärker.
– . . . Der Kontrast wird schwächer.
Einstellen der Bildhelligkeit
Der Wert für die Helligkeit, den Sie hier einstellen, wird für
alle eingespeisten Eingangssignale gespeichert.
Nach etwa 3 Sekunden wird die Bildschirmanzeige
automatisch ausgeblendet.
1 Drücken Sie die Taste ¨ (Helligkeit) ˘.
Die Bildschirmanzeige HELLIGKEIT erscheint.
*
Die Horizontal- und die Vertikalfrequenz des gerade
eingespeisten Eingangssignals erscheinen in der
Bildschirmanzeige KONTRAST.
HELLIGKEIT
26
Ändern der Bildgröße je nach
Signal
48. 4kHz / 60Hz
Horizontalfrequenz* Vertikalfrequenz*
Der Monitor ist werkseitig so eingestellt, daß das Bild in
voller Größe auf dem Bildschirm anzeigt wird, unabhängig
von dem Modus oder der Auflösung des Bildes. Sie können
das Bild aber auch im tatsächlichen Bildseitenverhältnis
oder in der tatsächlichen Auflösung anzeigen lassen.
Beachten Sie bitte, daß Signale mit einer Auflösung von
1280 x 1024 den ganzen Bildschirm füllen und ZOOM nicht
möglich ist.
2 Drücken Sie die Tasten +/–.
+ . . . Das Bild wird heller.
– . . . Das Bild wird dunkler.
Nach etwa 3 Sekunden wird die Bildschirmanzeige
automatisch ausgeblendet.
Der Wert für den Zoom, den Sie hier einstellen, wird nur für
das gerade eingespeiste Eingangssignal gespeichert.
*
Die Horizontal- und die Vertikalfrequenz des gerade
eingespeisten Eingangssignals erscheinen in der
Bildschirmanzeige HELLIGKEIT.
FULL 1
Das Eingangssignal wird in voller Größe auf dem
Bildschirm angezeigt, unabhängig von dem Modus oder
der Auflösung des Bildes.
Wenn der Bildschirm in einem dunklen Raum zu hell ist
Verringern Sie den Einstellwert für HINTERGRUNDLICHT
(Seite 15).
FULL 2
Das Eingangssignal wird im tatsächlichen
Bildseitenverhältnis auf dem Bildschirm angezeigt. Daher
können je nach Signal schwarze Streifen oben und am
Bildrand erscheinen.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Einstellen des Monitors
REAL
Das Eingangssignal wird mit der tatsächlichen Auflösung
auf dem Bildschirm angezeigt. Signale mit einer
niedrigeren Auflösung als SXGA werden in der
Bildschirmmitte und umgeben von einem schwarzen
Rahmen angezeigt.
Signale mit einer Auflösung von 1280 x 1024 nur im Modus
REAL angezeigt werden und SMOOTHING nicht möglich
ist.
Der Wert für die Glättung, den Sie hier einstellen, wird nur
für das gerade eingespeiste Eingangssignal gespeichert.
STANDARD
Standardglättungseffekt (werkseitig eingestellt).
1 Drücken Sie die Taste MENU.
TEXT
MENU
MENU
ENDE
OK
Die Bildschirmanzeige MENU
erscheint.
Zeichen werden mit scharfen Konturen angezeigt. Dieser
Modus eignet sich für textbasierte Anwendungen.
GRAPHICS
PHASE
PITCH
BILDLAGE
MENU
Bilder werden scharf angezeigt. Dieser Modus eignet sich
für CD-ROM-Software wie Fotos oder Abbildungen.
ZOOM/SMOOTHING
FARBE
1 Drücken Sie die Taste MENU.
MENU
MENU
ENDE
OK
2 Wählen Sie mit den Tasten ˘/≥ die Option ZOOM/
SMOOTHING aus, und drücken Sie die Taste MENU
erneut.
Die Bildschirmanzeige MENU
erscheint.
PHASE
PITCH
BILDLAGE
MENU
Die Bildschirmanzeige ZOOM/SMOOTHING erscheint.
ZOOM/SMOOTHING
FARBE
MENU
2 Wählen Sie mit den Tasten ˘/≥ die Option ZOOM/
SMOOTHING aus, und drücken Sie die Taste MENU
erneut.
ZOOM
ZOOM
/SMOOTHING
DE
FULL1
FULL2
REAL
Die Bildschirmanzeige ZOOM/SMOOTHING erscheint.
SMOOTHING
MENU
3 Wählen Sie mit den Tasten ˘/≥ die Option ZOOM
ZOOM
ZOOM
/SMOOTHING
aus.
ZOOM
/SMOOTHING
FULL1
FULL2
REAL
SMOOTHING
ZOOM
SMOOTHING
FULL1
FULL2
REAL
3 Wählen Sie mit den Tasten ˘/≥ die Option
4 Wählen Sie mit den Tasten +/– den gewünschten
Modus aus.
SMOOTHING aus.
ZOOM
/
SMOOTHING
Nach etwa 30 Sekunden wird die
Bildschirmanzeige automatisch
ausgeblendet.
ZOOM
SMOOTHING
STANDARD
TEXT
GRAPHICS
Sie können die Bildschirmanzeige jedoch
auch ausblenden, indem Sie die Taste
MENU zweimal drücken.
4 Wählen Sie mit den Tasten +/– den gewünschten
Modus aus.
So lassen Sie das Bild in voller Größe auf dem
Bildschirm anzeigen
Wählen Sie in Schritt 4 “FULL 1”.
Nach etwa 30 Sekunden wird die Bildschirmanzeige
automatisch ausgeblendet.
Sie können die Bildschirmanzeige jedoch auch ausblenden,
indem Sie die Taste MENU zweimal drücken.
Wenn das im Modus FULL 1 oder FULL 2
angezeigte Bild nicht gleichförmig ist
Verwenden Sie die Bildglättungsfunktion. Der
Glättungseffekt wird in der Reihenfolge TEXT n
STANDARD n GRAPHICS stärker. Beachten Sie, daß
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Einstellen des Monitors
Ändern oder Einstellen der
Farbtemperatur
Ändern der Position der
Bildschirmanzeigen
Die Farbtemperatur ist werkseitig auf 9300K eingestellt.
Sie können die Farbtemperatur ändern und 6500K oder
5000K einstellen. Stellen Sie mit dieser Funktion die
Farbtemperatur so ein, daß die Farben mit den tatsächlichen
Farben eines ausgedruckten Bildes übereinstimmen.
Der Wert für die Farbtemperatur, den Sie hier einstellen, gilt
für alle eingespeisten Eingangssignale.
Sie können die Bildschirmanzeigen verschieben, wenn Sie
z.B. den Bereich hinter einer Bildschirmanzeige einstellen
wollen.
1 Drücken Sie die Taste MENU.
Die Bildschirmanzeige MENU erscheint.
MENU
MENU
OK
MENU
1 Drücken Sie die Taste MENU.
ENDE
MENU
MENU
ENDE
OK
PHASE
PITCH
BILDLAGE
Die Bildschirmanzeige MENU
erscheint.
ZOOM/SMOOTHING
FARBE
LANGUAGE
OPTION
PHASE
PITCH
BILDLAGE
ZOOM/SMOOTHING
FARBE
LANGUAGE
MENU
2 Wählen Sie OPTION mit den Tasten ˘/≥, und
drücken Sie die Taste MENU erneut.
2 Wählen Sie mit den Tasten ˘/≥ die Option FARBE
aus, und drücken Sie die Taste MENU erneut.
Die Bildschirmanzeige
Die Bildschirmanzeige OPTION erscheint.
FARBE
OPTION
FARBE erscheint.
MENU
9300K
6500K
5000K
MENU
ANWENDERMODUS
: 5SEC
: FREIGB
R
G
B
50
50
50
POSITION H
3 Wählen Sie mit den Tasten ˘/≥ die Farbtemperatur
aus.
3 Wählen Sie mit den Tasten ˘/≥ die Option
(POSITION H) oder
So stellen Sie die
(POSITION V) aus.
So stellen Sie die
Wenn an der ausgewählten Farbtemperatur
Feineinstellungen erforderlich sind, fahren Sie mit
Schritt 4 fort.
vertikale Position ein
horizontale Position ein
Andernfalls drücken Sie die Taste MENU. Die
Bildschirmanzeige MENU erscheint.
OPTION
OPTION
4 Wählen Sie mit den Tasten ˘/≥ die Option R (rot)
oder B (blau) aus, und stellen Sie mit den Tasten +/–
die gewünschte Farbe ein.
: 5SEC
: 5SEC
: FREIGB
: FREIGB
Die Farbe ändert sich in dem Maße, in dem die R- oder
B-Anteile im Hinblick auf
FARBE
POSITION H
POSITION V
G (grün) erhöht oder
verringert werden.
9300K
6500K
4 Verschieben Sie die Bildschirmanzeige mit den Tasten
+/– an die gewünschte Position.
5000K
ANWENDERMODUS
R
G
B
50
50
50
Nach etwa 30 Sekunden wird die Bildschirmanzeige
automatisch ausgeblendet.
Sie können die Bildschirmanzeige jedoch auch ausblenden,
indem Sie die Taste MENU zweimal drücken.
Die Bildschirmanzeige OPTION wird nach etwa 30
Sekunden automatisch ausgeblendet.
Sie können die Bildschirmanzeige jedoch auch ausblenden,
indem Sie die Taste MENU zweimal drücken.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Einstellen des Monitors
Einstellen der
Hintergrundbeleuchtung
Einstellen der Verzögerung für
die Energiesparfunktion
Wenn der Bildschirm in einem dunklen Raum zu hell
eingestellt ist, stellen Sie die Hintergrundbeleuchtung des
Monitors ein.
Sie können eine Verzögerungszeit angeben, nach der der
Monitor in den Energiesparmodus wechselt. Weitere
Informationen zu der Energiesparfunktion dieses Monitors
finden Sie auf Seite 17.
1 Drücken Sie die Taste MENU.
Die Bildschirmanzeige MENU erscheint.
1 Drücken Sie die Taste MENU.
Die Bildschirmanzeige MENU
MENU
MENU
ENDE
OK
MENU
MENU
OK
erscheint.
MENU
ENDE
PHASE
PITCH
BILDLAGE
MENU
PHASE
PITCH
BILDLAGE
ZOOM/SMOOTHING
FARBE
LANGUAGE
OPTION
ZOOM/SMOOTHING
FARBE
LANGUAGE
OPTION
2 Wählen Sie OPTION mit den Tasten ˘/≥, und
drücken Sie die Taste MENU erneut.
2 Wählen Sie OPTION mit den Tasten ˘/≥, und
drücken Sie die Taste MENU erneut.
Die Bildschirmanzeige OPTION erscheint.
Die Bildschirmanzeige OPTION erscheint.
DE
OPTION
OPTION
MENU
MENU
: 5SEC
: FREIGB
: 5SEC
: FREIGB
POSITION H
POSITION H
ZZ...
3 Wählen Sie mit den Tasten ˘/≥ die Option
(HINTERGRUNDLICHT) aus.
OPTION
3 Wählen Sie mit den Tasten ˘/≥ die Option
(STROMSPAREINST) aus.
OPTION
60MIN
1MIN
5SEC
AUS
26
: FREIGB
HINTERGRUNDLICHT
STROMSPAREINST
4 Stellen Sie die Beleuchtungsstärke mit den Tasten +/–
ein.
4 Wählen Sie mit den Tasten +/– die gewünschte
Verzögerungszeit aus.
Wenn STROMSPAREINST auf AUS gesetzt ist, wechselt
der Monitor nicht in den Energiesparmodus.
Die Bildschirmanzeige OPTION wird nach etwa 30
Sekunden automatisch ausgeblendet.
Sie können die Bildschirmanzeige jedoch auch ausblenden,
indem Sie die Taste MENU zweimal drücken.
Die Bildschirmanzeige OPTION wird nach etwa 30
Sekunden automatisch ausgeblendet.
Sie können die Bildschirmanzeige jedoch auch ausblenden,
indem Sie die Taste MENU zweimal drücken.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Einstellen des Monitors
Sperren der Bedienelemente
Zurücksetzen der Einstellungen
Mit der Tastensperrfunktion können Sie alle
Bedienelemente mit Ausnahme des Netzschalters u, der
Taste MENU und einiger anderer Tasten an der Vorderseite
sperren.
Sie können alle Einstellungen auf die werkseitigen Werte
zurücksetzen.
Dabei wird die Farbtemperatur auf 9300K, die Zoom-
Einstellung auf FULL 1 und die Verzögerung für die
Energiesparfunktion auf 5 Sekunden zurückgesetzt. Die
Tastensperrfunktion wird deaktiviert. Andere Einstellungen
werden auf die Standardwerte zurückgesetzt. Die Sprache
der Bildschirmanzeigen wird jedoch nicht gewechselt.
Wenn Sie SPER gewählt haben, lassen sich in der
Bildschirmanzeige MENU nur noch folgende Optionen
auswählen:
• ENDE
• TASTATUR und VOREINSTELLUNG in der
Bildschirmanzeige OPTION
1 Drücken Sie die Taste MENU.
Die Bildschirmanzeige MENU erscheint.
MENU
MENU
OK
Wenn Sie eine gesperrte Taste drücken, erscheint die
MENU
Markierung
auf dem Bildschirm.
ENDE
PHASE
PITCH
BILDLAGE
1 Drücken Sie die Taste MENU.
Die Bildschirmanzeige MENU erscheint.
ZOOM/SMOOTHING
FARBE
MENU
MENU
OK
MENU
ENDE
2 Wählen Sie OPTION mit den Tasten ˘/≥, und
drücken Sie die Taste MENU erneut.
PHASE
PITCH
BILDLAGE
Die Bildschirmanzeige OPTION erscheint.
ZOOM/SMOOTHING
OPTION
2 Wählen Sie OPTION mit den Tasten ˘/≥, und
MENU
drücken Sie die Taste MENU erneut.
Die Bildschirmanzeige
OPTION erscheint.
OPTION
: 5SEC
: FREIGB
MENU
: 5SEC
: FREIGB
POSITION H
3 Wählen Sie mit den Tasten ˘/≥ die Option
3 Wählen Sie mit den Tasten ˘/≥ die Option ?
(TASTATUR) aus.
(VOREINSTELLUNG) aus.
OPTION
OPTION
FREIGB
SPER
:
5SEC
EIN
TASTATUR
VOREINSTELLUNG
4 Wählen Sie mit der Taste – die Option SPER aus.
4 Drücken Sie die Taste +.
Die Bildschirmanzeige OPTION wird
nach etwa 30 Sekunden automatisch
ausgeblendet.
Sie können die Bildschirmanzeige jedoch
auch ausblenden, indem Sie die Taste
MENU zweimal drücken.
Die Bildschirmanzeige OPTION wird nach etwa 30
Sekunden automatisch ausgeblendet.
So heben Sie die Tastensperre wieder auf
Sie können die Bildschirmanzeige jedoch auch ausblenden,
indem Sie die Taste MENU zweimal drücken.
Wählen Sie in Schritt 4 mit der Taste + die Option FREIGB
aus.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
We it e re In fo rm a t io n e n
Energiesparstufe
Leistungs-
aufnahme
Anzeige u
Vordefinierte Modi und
Benutzermodi
1
2
Normalbetrieb
≤ 48 W
Grün
Bereitschaft
(1. Stufe)
≤ 15 W
Abwechselnd
grün und orange
Dieser Monitor verfügt über werkseitig vordefinierte Modi
für die gängigsten Industriestandards und bietet somit
echte “Plug & Play”-Unterstützung.
Eine Liste der werkseitig vordefinierten Modi finden Sie im
Appendix.
3
4
Unterbrechung
(2. Stufe) (Schlaf)*
≤ 15W
Abwechselnd
grün und orange
Deaktiviert
(3. Stufe)** (Tiefschlaf)*
≤ 1 W
Orange
Wenn ein neues Eingangssignal eingespeist wird, wählt der
Monitor den geeigneten werkseitig vordefinierten Modus
aus und nimmt eine Phasenkalibrierung in bezug auf die
Bildschirmmitte vor, so daß eine hohe Bildqualität erzielt
werden kann. Die Kalibrierungseinstellung wird
gespeichert und sofort abgerufen, wann immer dasselbe
Eingangssignal eingeht.
Bei Eingangssignalen, die keinem der werkseitig
voreingestellten Modi entsprechen, führt der Monitor mit
Hilfe seiner digitalen Multiscan-Technologie alle
Einstellungen durch, die bei einem beliebigen Timing
innerhalb des für den Monitor gültigen Frequenzbereichs
für ein scharfes Bild nötig sind. Es kann jedoch mitunter
erforderlich werden, die vertikale und horizontale
Zentrierung feineinzustellen. Drücken Sie dazu einfach die
Taste AUTO, oder stellen Sie den Monitor wie in dieser
Anleitung beschrieben ein. Die Einstellungen werden
automatisch als Benutzermodus gespeichert und abgerufen,
wann immer das betreffende Eingangssignal eingeht.
5
6
Ausgeschaltet
≤ 1 W
Leuchtet nicht
Leuchtet nicht
Hauptstromversorgung
ausgeschaltet
0 W
*
“Schlaf” und “Tiefschlaf” sind Energiesparmodi, die von der
EPA (Umweltschutzbehörde der USA) definiert wurden.
** Wenn der Computer in den Energiesparmodus wechselt, geht
kein Eingangssignal mehr ein, und KEIN EING SIGNAL
erscheint auf dem Bildschirm. Nach der eingestellten
Verzögerungszeit (siehe “Einstellen der Verzögerung für die
Energiesparfunktion” auf Seite 15) wechselt der Monitor in den
Energiesparmodus.
Störungsbehebung
DE
Sie können die Ursache eines Problems gegebenenfalls
anhand dieses Abschnitts erkennen und beheben, ohne daß
Sie sich an den Kundendienst wenden müssen.
Bildschirmmeldungen
Energiesparfunktion
Wenn am Eingangssignal ein Fehler vorliegt, erscheint eine
der folgenden Warnmeldungen auf dem Bildschirm. Wie
Sie das Problem beheben, schlagen Sie unter
Dieser Monitor entspricht den Energiesparrichtlinien der
VESA und des ENERGY STAR-Programms sowie des
enger gefaßten NUTEK-Standards.
Wenn der Monitor an einen Computer oder eine Grafikkarte
angeschlossen ist, der bzw. die VESA DPMS (Display Power
Management Signaling) unterstützt, wird der
“Fehlersymptome und Abhilfemaßnahmen” auf Seite 18
nach.
INFORMATION
Stromverbrauch des Geräts in drei Stufen, wie unten
erläutert, reduziert.
NICHT IM
ABTASTBEREICH
Sie können über die entsprechende Bildschirmanzeige eine
Verzögerungszeit angeben, nach der der Monitor in den
Energiesparmodus wechselt. Stellen Sie die
Verzögerungszeit wie unter “Einstellen der Verzögerung
für die Energiesparfunktion” auf Seite 15 beschrieben ein.
“NICHT IM ABTASTBEREICH” gibt an, daß das
Eingangssignal nicht den technischen Daten des Monitors
entspricht.
“KEIN EING SIGNAL” gibt an, daß kein Signal am Monitor
eingeht.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
We it e re In fo rm a t io n e n
Fehlersymptome und Abhilfemaßnahmen
Wenn ein Problem auf den angeschlossenen Computer oder andere Geräte zurückzuführen ist, schlagen Sie bitte in der
Dokumentation zu dem angeschlossenen Gerät nach.
Führen Sie die Selbstdiagnosefunktion (Seite 19) aus, wenn sich ein Problem mit den im folgenden empfohlenen Maßnahmen
nicht beheben läßt.
S y m p t o m
Üb e r p r ü f e n Sie b it t e f o lg e n d e s :
Kein Bild
• Das Netzkabel muß korrekt angeschlossen sein.
Die Anzeige u leuchtet nicht.
• Der Netzschalter u muß sich in der Position “Ein” befinden.
• Das Videosignalkabel muß korrekt angeschlossen sein, und alle Stecker müssen fest in den
Buchsen sitzen.
• Das Eingangssignal muß korrekt ausgewählt sein.
• Achten Sie darauf, daß am HD15-Videoeingangsanschluß keine Stifte verbogen oder
eingedrückt sind.
Die Meldung “KEIN EING
SIGNAL” erscheint auf dem
Bildschirm, oder die Anzeige u
leuchtet orange oder wechselt
zwischen grün und orange.
pDurch den angeschlossenen Computer oder andere Geräte verursachte Probleme
• Der Computer befindet sich im Energiesparmodus. Drücken Sie eine beliebige Taste auf der
Computertastatur.
• Überprüfen Sie, ob der Computer eingeschaltet ist.
• Die Grafikkarte muß korrekt im richtigen Bus-Steckplatz sitzen.
pDurch den angeschlossenen Computer oder andere Geräte verursachte Probleme
• Die Videofrequenz muß im für den Monitor angegebenen Bereich liegen. Wenn Sie einen
älteren Monitor durch diesen Monitor ersetzt haben, schließen Sie den alten Monitor wieder
an und stellen eine Frequenz im folgenden Bereich ein:
Die Meldung “NICHT IM
ABTASTBEREICH” erscheint
auf dem Bildschirm.
Horizontal: 30 – 92 kHz, vertikal: 48 – 85 Hz
• Verwenden Sie die Selbstdiagnosefunktion (Seite 19).
Es wird keine Meldung
angezeigt, und die Anzeige u
leuchtet grün oder blinkt
orange.
• Wenn Sie einen älteren Monitor durch diesen Monitor ersetzt haben, schließen Sie den alten
Monitor wieder an und gehen folgendermaßen vor: Installieren Sie die Diskette “Windows
Monitor Information Disk/Utility Disk”, und wählen Sie aus den Sony-Monitoren im
Auswahlfenster für Monitore in Windows 95/98 den Eintrag “CPD-L181” aus.
Sie arbeiten mit einem
Windows 95/98-System.
• Der Macintosh-Adapter und das Videosignalkabel müssen richtig angeschlossen sein
(Seite 6).
Sie arbeiten mit einem
Macintosh-System.
Das Bild flimmert, springt,
oszilliert oder ist gestört.
• Drücken Sie die Taste AUTO. Wenn Sie keine zufriedenstellenden Ergebnisse erzielen,
stellen Sie Signalabstand und Phase ein (Seite 10).
• Entfernen Sie alle möglichen Quellen elektrischer oder magnetischer Felder wie andere
Monitore, Laserdrucker, Ventilatoren, Leuchtstoffröhren oder Fernsehgeräte aus der Nähe
des Monitors.
• Halten Sie den Monitor von Stromleitungen fern, oder schützen Sie den Monitor durch eine
Magnetabschirmung.
• Schließen Sie das Netzkabel des Monitors an eine andere Steckdose, möglichst an einem
anderen Stromkreis, an.
• Versuchen Sie, den Monitor um 90 Grad nach links oder rechts zu drehen.
pDurch den angeschlossenen Computer oder andere Geräte verursachte Probleme
• Schlagen Sie in der Anleitung zur Grafikkarte die korrekte Monitoreinstellung nach.
• Überprüfen Sie, ob der Grafikmodus (VESA, Macintosh 21 Zoll Farbe usw.) und die
Frequenz des Eingangssignals von diesem Monitor unterstützt werden (Appendix). Auch
wenn die Frequenz innerhalb des unterstützten Bereichs liegt, arbeiten einige Grafikkarten
möglicherweise mit einem Synchronisationsimpuls, der für eine korrekte Synchronisation
des Monitors zu kurz ist.
• Stellen Sie die Auffrischungsrate am Computer (Vertikalfrequenz) auf den Wert ein, mit
dem Sie die besten Bilder erzielen.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
We it e re In fo rm a t io n e n
S y m p t o m
Üb e r p r ü f e n Sie b it t e f o lg e n d e s :
Das Bild ist verschwommen.
• Drücken Sie die Taste AUTO. Wenn Sie keine zufriedenstellenden Ergebnisse erzielen,
stellen Sie Signalabstand und Phase ein (Seite 10).
• Stellen Sie Kontrast und Helligkeit ein (Seite 12).
Das Bild ist zu dunkel.
• Stellen Sie die Hintergrundbeleuchtung ein (Seite 15).
• Stellen Sie die Helligkeit ein (Seite 12).
• Nach dem Einschalten des Geräts benötigt der Monitor einige Sekunden Aufwärmzeit. Das
Bild erscheint nach wenigen Sekunden.
Doppelbilder sind zu sehen.
• Verwenden Sie keine Bildschirmverlängerungskabel und/oder Videoschaltboxen, wenn
dieses Phänomen auftritt.
• Überprüfen Sie, ob alle Stecker fest in den jeweiligen Buchsen sitzen.
Das Bild ist nicht zentriert, oder
die Bildgröße ist nicht korrekt.
• Drücken Sie die Taste AUTO (Seite 10).
• Stellen Sie die Bildgröße (Seite 12) bzw. die Position (Seite 11) ein. Beachten Sie, daß bei
bestimmten Videomodi die Anzeige nicht den gesamten Bildschirm füllt.
Wellenförmige oder elliptische
Moiré-Effekte sind sichtbar.
• Stellen Sie Signalabstand und Phase ein (Seite 10).
Die Farbe ist nicht gleichmäßig.
• Drücken Sie die Taste AUTO. Wenn Sie keine zufriedenstellenden Ergebnisse erzielen,
stellen Sie Signalabstand und Phase ein (Seite 10).
Weiß sieht nicht weiß aus.
• Stellen Sie die Farbtemperatur ein (Seite 14).
Die Bedienelemente am
Monitor funktionieren nicht.
• Wenn die Bedienelementsperre eingeschaltet ist (SPER), schalten Sie sie aus (FREIGB, Seite
16).
DE
Wenn alle vier Farbbalken (weiß, rot, grün, blau) angezeigt
werden, funktioniert der Monitor ordnungsgemäß.
Schließen Sie die Videoeingangskabel wieder an, und
Selbstdiagnosefunktion
Dieser Monitor verfügt über eine Selbstdiagnosefunktion.
Wenn an dem Monitor oder am Computer ein Problem
auftritt, erscheint ein leerer Bildschirm, und die Netzanzeige
u leuchtet grün auf oder blinkt orange. Wenn die
Netzanzeige u orange leuchtet, befindet sich der Computer
im Energiesparmodus. Drücken Sie eine beliebige Taste auf
der Tastatur.
uberprüfen Sie den Zustand des/der Computer.
Wenn die Farbbalken nicht erscheinen, liegt möglicherweise
ein Fehler am Monitor vor. Wenden Sie sich mit der
Beschreibung des Problems an einen autorisierten Sony-
Händler.
We n n d ie Ne t za n ze ig e u o ra n g e b lin kt
Schalten Sie den Monitor am Netzschalter u aus und
wieder ein.
Wenn die Netzanzeige u jetzt grün leuchtet, funktioniert
der Monitor ordnungsgemäß.
Netzanzeige u
Wenn die Netzanzeige u immer noch blinkt, liegt
möglicherweise ein Fehler am Monitor vor. Ermitteln Sie
das Intervall, in dem die Netzanzeige u blinkt (in
Sekunden), und wenden Sie sich mit der Beschreibung des
Problems an einen autorisierten Sony-Händler. Notieren Sie
sich unbedingt die Modellbezeichnung und die
Seriennummer des Monitors. Notieren Sie sich außerdem
das Fabrikat und Modell Ihres Computers und der
Grafikkarte.
We n n d ie Ne t za n ze ig e u g rü n le u ch t e t
1 Lösen Sie das/die Videosignalkabel.
2 Bevor der Monitor in den Energiesparmodus
wechselt, drücken Sie die Taste +, und halten Sie sie
2 Sekunden lang gedrückt.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
We it e re In fo rm a t io n e n
Stiftbelegung für Eingang …1/…2
An ze ig e n d e s Bild sch irm s INFORMATION
Sie können den Modellnamen, die Seriennummer und das
Baujahr dieses Monitors anzeigen lassen.
1
5 4 3 2
10 9 8
7
6
15 14 13 12 11
Halten Sie die Taste MENU fünf Sekunden lang
gedrückt.
Die Bildschirmanzeige INFORMATION erscheint.
Stift Nr. Signal
Stift Nr. Signal
1
2
Rot
8
Masse Blau
DDC + 5V*
Masse
Beispiel
Grün (zusammen-
gesetztes Grünsignal
mit Synchronisation)
9
10
11
12
INFORMATION
Modellname
ID (Masse)
MODEL : CPD-L181
3
4
5
6
7
Blau
Bidirektionale
Daten (SDA)*
Seriennummer
SER NO : 1234567
ID (Masse)
DDC-Masse*
Masse Rot
Masse Grün
MANUFACTURED : 1999-52
Woche und Jahr der
Herstellung
13
14
15
H. Sync
V. Sync
Datentakt (SCL)*
*
DDC-Standard (DDC = Display Data Channel) nach VESA
Technische Daten
LCD-Bildschirm
Typ: a-Si-TFT-Aktivmatrix
Bildgröße: 46 cm
Eingangssignalformat RGB-Betriebsfrequenz*
fh:30 – 92 kHz
fv:48 – 85 Hz
Effektive Bildpunkte
Auflösung
99,99 %
H: max. 1280 Punkte
V: max. 1024 Zeilen
100 – 240 Volt Wechselstrom,
50 – 60 Hz, 1,0 – 0,6 A
max. 48 W
Betriebsspannung
Leistungsaufnahme
Abmessungen (B/H/T) Einschließlich Ständer:
ca. 468 × 422 × 207,5 mm
nur Monitor:
ca. 468 × 354,5 × 90 mm
Gewicht
ca. 9 kg einschließlich Ständer
Plug & Play
DDC/DDC2B/DDC2Bi
Mitgeliefertes Zubehör
Siehe Seite 6.
* Em p fo h le n e We rt e fü r d a s h o rizo n t a le u n d
ve rt ika le Tim in g
Das horizontale Synchronbreitenverhältnis sollte bei mehr als 4,8 %
des horizontalen Gesamt-Timing oder bei 0,8 µSek. liegen, je
nachdem, welcher Wert höher ist.
Die horizontale Austastbreite sollte über 2,5 µSek. liegen.
Die vertikale Austastbreite sollte über 450 µSek. liegen.
Änderungen, die dem technischen Fortschritt dienen,
bleiben vorbehalten.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
ÍNDICE
Procedimientos iniciales
Precauciones ..........................................................................................................................4
Identificación de los componentes y controles.................................................................5
Instalación ..............................................................................................................................6
Encendido del monitor y del ordenador ...........................................................................8
Selección de la señal de entrada .........................................................................................8
Personalización del monitor
Introducción del sistema de indicaciones en pantalla.....................................................9
Selección del idioma de las indicaciones en pantalla ......................................................9
Ajuste automático de la imagen .......................................................................................10
Eliminación del parpadeo o de la borrosidad de forma manual .................................10
Ajuste de la posición de la imagen ...................................................................................11
Ajuste del brillo de la imagen ...........................................................................................12
Ajuste del contraste ............................................................................................................12
Cambio del tamaño de la imagen según la señal ...........................................................12
Cambio o ajuste de la temperatura del color ..................................................................14
Cambio de la posición de las indicaciones en pantalla .................................................14
Ajuste de la luz de fondo ...................................................................................................15
Ajuste del espacio de tiempo de retardo de ahorro de energía ...................................15
Bloqueo de los controles ....................................................................................................16
Restauración de los ajustes ................................................................................................16
ES
ES
Información complementaria
Modos predefinidos y de usuario ....................................................................................17
Solución de problemas .......................................................................................................17
Especificaciones ..................................................................................................................20
Appendix
Preset Mode Timing Table .................................................................................................. i
TCO’99 Eco-document ......................................................................................................... i
•
•
•
•
Macintosh es una marca comercial de Apple Computer, Inc.,
registrada en EE.UU. y otros países.
Windows® y MS-DOS son marcas comerciales registradas de
Microsoft Corporation en Estados Unidos y otros países.
IBM PC/AT y VGA son marcas comerciales registradas de IBM
Corporation de EE.UU.
VESA es una marca comercial de Video Electronics Standard
Association.
• ENERGY STAR es una marca registrada de EE. UU.
•
El resto de los nombres de los productos mencionados en este manual
pueden ser marcas comerciales o marcas comerciales registradas de
sus respectivas compañías.
•
Además, “™” y “®” no se mencionan en cada caso en este manual.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro ce d im ie n t o s in icia le s
Mantenimiento
Precauciones
• Limpie el exterior, el panel y los controles con un paño
suave ligeramente humedecido con una solución
detergente poco concentrada. No utilice estropajos ni
detergentes abrasivos, ni disolventes, como alcohol o
bencina.
• No frote, toque ni manipule la superficie de la pantalla
con objetos afilados o abrasivos, como un bolígrafo o un
destornillador. Este tipo de contacto puede rayar el tubo
de imagen.
• Limpie la pantalla con un paño suave. Si utiliza un líquido
limpiador de cristales, asegúrese de que éste no contenga
soluciones antiestáticas o aditivos similares, ya que puede
rayar la capa de la pantalla.
Instalación
• Con el fin de evitar el calentamiento interno, procure que
la unidad reciba una circulación de aire adecuada. No
coloque el monitor sobre superficies (mantas, colchas, etc.)
o cerca de materiales (cortinas, tapices) que puedan
bloquear los orificios de ventilación.
• No instale el monitor cerca de fuentes de calor, como
radiadores o conductos de aire caliente, ni lo exponga a la
luz solar directa, polvo excesivo, vibraciones mecánicas o
golpes.
• No coloque el monitor cerca de equipos que generen
magnetismo, como un transformador o líneas de alta
tensión.
Transporte
• Cuando transporte este monitor, agárrelo firmemente por
la parte inferior de la pantalla con las dos manos. Si deja
caer el monitor, puede producirse heridas o dañar dicho
monitor.
• Cuando transporte este monitor para su reparación o
traslado, utilice la caja y los materiales originales de
embalaje.
Manejo de la pantalla LCD
• Es posible que aparezcan puntos brillantes de luz
(rojos, azules o verdes) en la pantalla LCD. Esto no es
un fallo de funcionamiento. La pantalla LCD está
fabricada con tecnología de alta precisión y más del
99,99 % de los elementos de imagen son intactos. No
obstante, algunos de dichos elementos pueden no
aparecer o algunos de ellos pueden aparecer
constantemente.
Aviso sobre la conexión de la alimentación
• Utilice un cable de alimentación apropiado para el
suministro eléctrico local.
Para los usuarios en EE.UU.
• No deje la pantalla LCD orientada hacia el sol, ya que
puede dañarse. Tenga cuidado cuando coloque el monitor
cerca de una ventana.
Si no utiliza el cable adecuado, este monitor no
conformará las normas obligatorias de la FCC.
Para los usuarios en el Reino Unido
Si utiliza el monitor en el Reino Unido, utilice el cable con
enchufe suministrado para dicho país.
• No ejerza presión sobre la pantalla LCD ni la arañe. No
coloque objetos sobre la pantalla LCD, ya que ésta puede
perder uniformidad.
• Si utiliza el monitor en un lugar frío, es posible que
aparezca una imagen residual en la pantalla. Esto no es un
fallo de funcionamiento. Cuando el monitor se caliente, la
imagen de la pantalla volverá a ser normal.
Ejemplos de tipos de enchufe
• Si muestra una imagen fija durante mucho tiempo, es
posible que aparezca una imagen residual, que
desaparecerá eventualmente.
• La pantalla y el exterior se calientan durante el
funcionamiento. Esto no es un fallo de funcionamiento.
para 100 a 120 V CA
para 200 a 240 V CA para 240 V CA
solamente
La toma debe encontrarse cerca del equipo y ser de
fácil acceso.
Sustitución del tubo fluorescente
La unidad dispone de un tubo fluorescente, diseñado
especialmente, como aparato de iluminación de este
monitor. Si la pantalla LCD se oscurece, es inestable o no se
enciende, sustituya el tubo fluorescente por otro nuevo.
Consulte con el proveedor Sony cuando lo sustituya.
Desecho del monitor
• No deseche el monitor junto con basuras ordinarias.
No incluya el monitor en basuras domésticas.
• El tubo fluorescente contiene mercurio. Deseche el
monitor de acuerdo con las normas de las autoridades
sanitarias locales.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro ce d im ie n t o s in icia le s
Identificación de los
componentes y controles
Consulte las páginas indicadas entre paréntesis para obtener
más información.
Parte frontal
Parte posterior
1
2
POWER
MENU
3
8
4
AUTO
5
6
7
9
*
!º
1 In t e rru p t o r e in d ica d o r u (a lim e n t a ció n )
(p á g in a s 8, 17)
7 In d ica d o r e in t e rru p t o r d e e n t ra d a …1, 2
(p á g in a 8)
ES
ES
Enciende y apaga el monitor.
Selecciona la señal de entrada entre …1 y …2. Cada
vez que pulse el botón, la entrada cambiará de forma
alterna y se iluminará el indicador correspondiente.
El indicador se ilumina en verde cuando el monitor está
encendido, y parpadea en verde y naranja o se ilumina
en naranja cuando se encuentra en el modo de ahorro
de energía.
8 In t e rru p t o r POWER (a lim e n t a ció n
p rin cip a l) (p á g in a 8)
2 Bo t ó n MENU (m e n ú ) (p á g in a s 9 – 16, 19)
Para conectar la alimentación principal, presione sobre
el lado“–”. Para desconectarla, presione sobre el lado
“®”.
Muestra la indicación MENU.
3 Bo t ó n ¨ (b rillo ) (˘) (p á g in a s 9 – 16)
Ajusta el brillo de la imagen.
9 Co n e ct o re s d e e n t ra d a …1/…2 (HD15)
(p á g in a s 6, 8)
Funciona como el botón ˘ al seleccionar opciones de
menú.
Introducen señales de vídeo RGB analógicas (0,714
Vp-p, positivas) y señales SYNC.
4 Bo t ó n > (co n t ra st e ) (≥) (p á g in a s 9 – 16)
!º Co n e ct o r AC IN (p á g in a 6)
Proporciona alimentación de CA al monitor desde la
toma mural.
Ajusta el contraste.
Funciona como el botón ≥ al seleccionar opciones de
menú.
* Este conector sólo lo utiliza personal de servicio técnico.
No conecte nada a esta toma.
5 Bo t o n e s +/– (a ju st e ) (p á g in a s 11 – 16)
Ajustan la opción de menú seleccionada.
6 Bo t ó n AUTO (p á g in a 10)
Cuando la señal procedente del ordenador se muestra
en este monitor, pulse el botón AUTO para ajustar la
imagen automáticamente al ordenador.
También debe pulsar este botón si la imagen no está
centrada o aparece borrosa.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro ce d im ie n t o s in icia le s
Conexión a un ordenador Macintosh
Instalación
Utilice el adaptador Macintosh suministrado.
Antes de utilizar este monitor, compruebe que se han
incluido los siguientes artículos:
• Monitor LCD (1)
• Cubierta posterior (1)
• Cable de alimentación (1)
a …1 o …2
• Cable de señales de vídeo HD15 (1)
• Adaptador Macintosh (1)
• Windows Monitor Information Disk/Utility Disk (1)
• Disquete de utilidades Macintosh (1)
• Tarjeta de garantía (1)
Ordenador
Macintosh o
compatible
monitor
Cable de
a la salida del
señales de
vídeo HD15
(suministrado)
• Este manual de instrucciones (1)
Paso 1: Conexión del monitor al ordenador
Adaptador Macintosh
(suministrado)
Apague el monitor y el ordenador antes de realizar la
conexión.
*
Conecte el adaptador Macintosh suministrado al ordenador
antes de conectar el cable. Este adaptador es compatible con los
ordenadores Macintosh LC, Performa, Quadra, Power
Macintosh y Power Macintosh de la serie G3 (a la venta antes de
enero de 1999). Si conecta un Power Macintosh de la serie G3, a
la venta a partir de enero de 1999, necesitará un adaptador
diferente (no suministrado). La serie Macintosh II y algunas más
antiguas de los modelos PowerBook pueden requerir un
adaptador con microinterruptores (no suministrado).
Conexión a un ordenador IBM PC/AT o
compatible
a …1 o …2
Paso 2: Conexión del cable de
alimentación
Ordenador
IBM PC/AT o
compatible
Con el monitor y el ordenador apagados, conecte un
extremo del cable de alimentación de CA al monitor y el
otro a una toma de corriente.
Cable de
a la salida del
monitor
señales de
vídeo HD15
(suministrado)
a AC IN
Si e l sist e m a d e PC n o e s co m p a t ib le co n Plu g &
Pla y (DDC2B y DDC2Bi)
a una toma de
corriente
Este monitor emplea el pin nº 9 del conector de señales de vídeo
para la compatibilidad Plug & Play (DDC2B y DDC2Bi). Consulte la
página 20 para ver la ubicación del pin nº 9.
Cable de
alimentación
(suministrado)
•
Si el ordenador acepta el pin nº 9, utilice el cable de señales de
vídeo HD15 suministrado.
Si el ordenador no acepta el pin nº 9, póngase en contacto con su
proveedor para obtener información sobre cómo obtener un
adaptador HD15.
•
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro ce d im ie n t o s in icia le s
3 Gire el tornillo para fijar la cubierta posterior.
Paso 3: Instalación de la cubierta posterior
Una vez conectado el ordenador y el cable de alimentación,
fije la cubierta posterior suministrada.
Compruebe que mantiene la pantalla en posición vertical
cuando fije la cubierta posterior.
1 Conecte el cable del ordenador y el de alimentación.
Desbloqueado
Bloqueado
Uso de la inclinación
2 Presione sobre la parte superior de la cubierta
posterior contra la parte superior de la pieza de
fijación de dicha cubierta y, a continuación, presione
sobre la cubierta para colocarla.
La característica de inclinación permite ajustar el monitor
dentro del margen de 30° hacia arriba, y de 45° hacia la
izquierda o la derecha. No obstante, es posible obtener los
mejores resultados de visualización inclinando la pantalla
hacia arriba 5° o más.
ES
ES
Para girar el monitor, agárrelo por la parte inferior con las
dos manos como se ilustra a continuación.
1
2
30°
45°
45°
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro ce d im ie n t o s in icia le s
Pa ra u su a rio s q u e u t ilice n Win d o w s NT4.0
La configuración del monitor en Windows NT4.0 es diferente a la
de Windows 95/98 y en ella no es necesario seleccionar el tipo de
monitor. Consulte el manual de instrucciones de Windows NT4.0
para obtener información detallada sobre el ajuste de la resolución,
la frecuencia de barrido y el número de colores.
Encendido del monitor y del
ordenador
1 Presione sobre el lado “–” del interruptor POWER.
Aju st e d e la re so lu ció n y n ú m e ro d e co lo re s d e l
m o n it o r
POWER
Consulte el manual de instrucciones del ordenador para ajustar la
resolución y número de colores del monitor. El número de colores
puede variar según el ordenador o tarjeta de gráfica. El ajuste de la
paleta de colores y el número real de colores es de la siguiente
forma:
•
•
High Color (16 bits) n 65.536 colores
True Color (24 bits) n aproximadamente 16,77 millones de
colores
2 Pulse el interruptor u.
En el modo True Color (24 bits), la velocidad puede ser menor.
Selección de la señal de entrada
Es posible conectar dos ordenadores a este monitor
mediante los conectores HD 15. Para cambiar entre ellos,
utilice el botón ….
3 Encienda el ordenador.
La instalación del monitor ya está completa.
Si es necesario, utilice los controles del monitor para ajustar
la imagen.
Si no aparece ninguna imagen en la pantalla
Ordenadores
•
Compruebe que el monitor se encuentra correctamente
conectado al ordenador.
Si aparece en pantalla la indicación NO INPUT SIGNAL, cambie
la señal de entrada y verifique que la tarjeta de vídeo del
ordenador está completamente insertada en la ranura apropiada
del bus.
Si sustituye un monitor antiguo por este y aparece en pantalla la
indicación OUT OF SCAN RANGE, vuelva a conectar el
monitor antiguo. A continuación, ajuste la tarjeta de vídeo del
ordenador para que la frecuencia horizontal sea entre 30 y 92
kHz, la frecuencia vertical entre 40 y 85 Hz y la resolución de
1280 x 1024 o menos.
conectado a
…2
•
conectado a
…1
Pulse el botón ….
•
La señal de entrada y el indicador de entrada
correspondiente cambiarán cada vez que pulse el botón.
Para obtener más información sobre los mensajes en pantalla,
consulte “Problemas y soluciones” en la página 18.
Pa ra lo s u su a rio s q u e u t ilice n Win d o w s 95/98
Para aumentar el potencial del monitor, instale en el PC el archivo
de información sobre el nuevo modelo del disquete Windows
Monitor Information Disk/Utility Disk suministrado.
Este monitor cumple con el estándar Plug & Play “VESA DDC”. Si
su PC/tarjeta gráfica cumple con DDC, seleccione “Plug & Play
Monitor (VESA DDC)” o el nombre de modelo de este monitor
como tipo de monitor en “Control Panel” de Windows 95/98. Si su
PC/tarjeta gráfica presenta dificultades de comunicación con este
monitor, cargue el disquete Windows Monitor Information Disk/
Utility Disk y seleccione el nombre de modelo de este monitor
como tipo de monitor.
No t a
Si reinicia el ordenador que desea visualizar o éste se encuentra en
el modo de ahorro de energía, es posible que el monitor cambie
automáticamente a la señal del otro conector. En este caso,
seleccione la señal apropiada de forma manual con el botón ….
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Personalización del monitor
OPCION
Antes de realizar el ajuste
Muestra la indicación OPCION. Es posible definir ajustes
como la luz de fondo, la posición de las indicaciones en
pantalla, el espacio de tiempo de retardo de ahorro de
energía y el bloqueo de los controles.
Conecte el monitor y el ordenador, y enciéndalos.
Espere al menos 30 minutos antes de realizar los ajustes
con el fin de obtener el mejor resultado posible.
Introducción del sistema de
indicaciones en pantalla
Selección del idioma de las
indicaciones en pantalla
La mayoría de los ajustes se realizan mediante la indicación
MENU.
Para cambiar el idioma de las indicaciones en pantalla,
consulte “Selección del idioma de las indicaciones en
pantalla”.
Puede elegir inglés, francés, alemán, español, italiano o
japonés.
1 Pulse el botón MENU.
Aparece la indicación MENU.
MENU
MENU
EXIT
OK
MENU
MENU
SALIR
OK
MENU
PHASE
PITCH
CENTER
ZOOM/SMOOTHING
COLOR
LANGUAGE
OPTION
FASE
ANCHO
CENTRADO
ZOOM/SMOOTHING
COLOR
LANGUAGE
OPCION
2 Pulse los botones ˘/≥ para seleccionar LANGUAGE, y
pulse el botón MENU.
SALIR
ES
Cierra la indicación MENU.
Aparece la indicación LANGUAGE.
FASE
LANGUAGE
Muestra la indicación FASE. Ajuste la fase si los caracteres o
las imágenes aparecen borrosas en toda la pantalla. Ajuste la
fase después de ajustar el ancho.
MENU
ENGLISH
FRANÇAIS
DEUTSCH
ESPAÑOL
ITALIANO
ANCHO
Muestra la indicación ANCHO. Ajuste el ancho si los
caracteres o las imágenes no aparecen con nitidez en
determinadas partes de la pantalla.
3 Pulse los botones ˘/≥ para seleccionar el idioma que
desee, y pulse el botón MENU.
CENTRADO
Aparece la indicación MENU del idioma seleccionado.
Muestra la indicación CENTRADO para ajustar el centrado
de la imagen.
MENU
MENU
SALIR
OK
MENU
ZOOM/SMOOTHING
FASE
ANCHO
CENTRADO
Muestra la indicación en pantalla ZOOM/SMOOTHING,
que permite ajustar la nitidez de la imagen según la relación
de aspecto o resolución de la señal de entrada.
ZOOM/SMOOTHING
COLOR
LANGUAGE
OPCION
COLOR
Muestra la indicación COLOR para ajustar la temperatura
del color.
La indicación desaparece automáticamente transcurridos
unos 30 segundos.
Para cerrar la indicación, vuelva a pulsar el botón MENU.
LANGUAGE
Muestra la indicación LANGUAGE para seleccionar el
idioma de las indicaciones en pantalla.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Personalización del monitor
Ajuste automático de la imagen
Eliminación del parpadeo o de la
borrosidad de forma manual
Si la imagen parpadea o es borrosa, pulse el botón AUTO. El
monitor se ajusta automáticamente a la señal del ordenador
conectado.
Ciertos ordenadores pueden requerir otros ajustes de
precisión. En este caso, ajuste el monitor manualmente.
Si una parte de la pantalla parpadea o aparece borrosa,
pulse el botón AUTO. Si esto no funciona, ajuste el ancho y
la fase tal como se describe a continuación.
Una vez ajustados el ancho y la fase, los valores se
almacenarán en la memoria para la señal de entrada actual.
1 Encienda el monitor.
1 Ajuste la resolución del ordenador en 1280 × 1024.
Si la resolución de la tarjeta de vídeo es inferior a 1280 ×
1024, ajuste ZOOM en REAL (página 12).
2 Encienda el ordenador.
3 Pulse el botón AUTO.
El monitor ajusta el ancho de forma que coincida con la
señal de entrada para que la imagen aparezca nítida y
adapta la imagen al centro de la pantalla.
2 Cargue el disco de utilidades.
Utilice el disco apropiado para el ordenador.
Para Windows 95/98
Windows Monitor Information Disk/Utility Disk
Para Macintosh
AUTO
Macintosh Utility Disk
3 Inicie el disco de utilidades y visualice el patrón de
prueba.
Para Windows 95/98
Haga clic en [Utility Disk] n [Windows] n
[Utility.exe].
Para Macintosh
Haga clic en [Utility Disk] n [SONY-Utility].
Notas
•
Esta función está destinada para utilizarse con un ordenador que
emplee Windows o un software similar de interfaz gráfica de
usuario que proporcione imágenes en pantalla completa. Es
posible que no funcione correctamente si el color de fondo es
oscuro o si la imagen introducida no llena la pantalla hasta los
bordes (como un indicativo MS-DOS).
4 Pulse el botón MENU.
Aparece la indicación MENU.
MENU
MENU
SALIR
OK
MENU
FASE
ANCHO
CENTRADO
ZOOM/SMOOTHING
COLOR
•
Es posible que la pantalla aparezca en blanco durante unos
segundos mientras se realiza la función de tamaño automático.
Esto no es un fallo de funcionamiento.
LANGUAGE
OPCION
Si la imagen parpadea o aparece borrosa incluso
después de pulsar el botón AUTO
Para ajustar el ancho y la fase, consulte “Eliminación del
parpadeo o de la borrosidad de forma manual”.
5 Pulse los botones ˘/≥ para seleccionar ANCHO, y
pulse el botón MENU de nuevo.
Aparece la indicación ANCHO.
Si la imagen no se sitúa en el centro de la
pantalla incluso después de pulsar el botón
AUTO
MENU
ANCHO
Para ajustarla con la indicación en pantalla CENTRADO,
consulte “Ajuste de la posición de la imagen”.
0
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Personalización del monitor
6 Pulse los botones +/– hasta que el color de la
pantalla sea uniforme.
Ajuste de la posición de la
imagen
Realice el ajuste de forma que las rayas verticales
desaparezcan.
Si la imagen no está en el centro de la pantalla, pulse el
botón AUTO. Si esta operación no funciona, ajuste el
centrado de la siguiente forma.
Una vez ajustado el centrado, se almacenará en la memoria
para la señal de entrada actual.
1 Inicie el disco de utilidades y visualice el patrón de
prueba.
Realice los pasos 2 y 3 de “Eliminación del parpadeo o
de la borrosidad de forma manual”.
7 Pulse el botón MENU.
2 Pulse el botón MENU.
Aparece la indicación MENU.
Aparece la indicación MENU.
Si se observan rayas horizontales en toda la pantalla,
ajuste la fase en el paso siguiente.
MENU
MENU
SALIR
OK
MENU
FASE
ANCHO
CENTRADO
8 Pulse los botones ˘/≥ para seleccionar FASE, y pulse
el botón MENU de nuevo.
ZOOM/SMOOTHING
COLOR
Aparece la indicación FASE.
LANGUAGE
OPCION
MENU
FASE
ES
3 Pulse los botones ˘/≥ para seleccionar CENTRADO, y
4
pulse el botón MENU de nuevo.
Aparece la indicación
CENTRADO.
CENTRADO
9 Pulse los botones +/– hasta que el color de la
pantalla sea uniforme.
H
V
MENU
Realice el ajuste hasta que la presencia de las rayas
horizontales sea mínima.
26
4 Desplace la imagen hacia arriba, abajo, la izquierda o
la derecha hasta que desaparezca el marco del
perímetro del patrón de prueba.
Para el ajuste horizontal, seleccione H con los
botones ˘/≥ y ajuste la posición con los botones +/–.
+ . . .para desplazar la imagen hacia la derecha
– . . .para desplazar la imagen hacia la izquierda
CENTRADO
10Cuando acabe, haga clic en [END] en la pantalla para
H
V
desactivar el patrón de prueba.
La indicación en pantalla desaparece automáticamente
pasados unos 30 segundos.
26
Para cerrar la indicación en pantalla, pulse el botón MENU
dos veces.
Continúa
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Personalización del monitor
Para el ajuste vertical, seleccione V con los botones
˘/≥ y ajuste la posición con los botones +/–.
+ . . .para desplazar la imagen hacia arriba
– . . .para desplazar la imagen hacia abajo
Ajuste del contraste
Una vez ajustado el contraste, se almacenará en la memoria
para todas las señales de entrada recibidas.
CENTRADO
H
V
1 Pulse el botón > (contraste) ≥.
Aparece la indicación CONTRASTE.
26
CONTRASTE
26
5 Cuando acabe, haga clic en [END] en la pantalla para
desactivar el patrón de prueba.
48. 4kHz / 60Hz
La indicación desaparece automáticamente transcurridos
unos 30 segundos.
Para cerrar la indicación en pantalla, pulse el botón MENU
dos veces.
Frecuencia
horizontal*
Frecuencia
vertical*
2 Pulse los botones +/–.
Ajuste del brillo de la imagen
+ . . . para aumentar el contraste
– . . . para disminuir el contraste
Una vez ajustado el brillo, se almacenará en la memoria
para todas las señales de entrada recibidas.
1 Pulse el botón ¨ (brillo) ˘.
Aparece la indicación BRILLO.
BRILLO
La indicación desaparece automáticamente transcurridos
unos 3 segundos.
*
Las frecuencias horizontal y vertical de la señal de entrada
recibida aparecen en la indicación CONTRASTE.
26
48. 4kHz / 60Hz
Cambio del tamaño de la imagen
según la señal
Frecuencia
horizontal*
Frecuencia
vertical*
El monitor está ajustado de fábrica para mostrar la imagen
en pantalla completa, independientemente del modo o
resolución de la misma. También es posible ver la imagen
con su relación de aspecto o resolución reales. Tenga en
cuenta que las señales de resolución 1280 × 1024 llenan toda
la pantalla y no es posible emplear ZOOM.
2 Pulse los botones +/–.
+ . . . para aumentar el brillo
– . . . para disminuir el brillo
Una vez ajustado el zoom, el valor se almacenará en
memoria para la señal de entrada actual.
La indicación desaparece automáticamente transcurridos
unos 3 segundos.
FULL 1
*
Las frecuencias horizontal y vertical de la señal de entrada
recibida aparecen en la indicación BRILLO.
La señal de entrada se muestra en pantalla completa,
independientemente del modo o resolución de la imagen.
FULL 2
Si la pantalla es demasiado brillante al utilizarla en una
sala oscura
La señal de entrada se muestra en pantalla con su relación
de aspecto real. Por tanto, pueden aparecen bandas
negras en las zonas superior e inferior de la pantalla,
según la señal.
Disminuya el valor de RETROILUMINACION (luz de
fondo) (página 15).
REAL
La señal de entrada se muestra en pantalla con su
resolución real. (Las señales SXGA secundarias aparecen
en el centro de la pantalla con un marco negro alrededor.)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Personalización del monitor
1 Pulse el botón MENU.
STANDARD
MENU
Aparece la indicación MENU.
MENU
SALIR
OK
Efecto de alisado estándar (efecto de alisado predefinido
de fábrica).
TEXT
FASE
ANCHO
CENTRADO
MENU
Para que los caracteres tengan más nitidez (este modo
resulta idóneo para todas las aplicaciones basadas en
texto).
ZOOM/SMOOTHING
COLOR
LANGUAGE
OPCION
GRAPHICS
Para que las imágenes aparezcan limpias (este modo
resulta idóneo para el software de CD-ROM, como las
imágenes fotográficas e ilustraciones).
2 Pulse los botones ˘/≥ para seleccionar ZOOM/
SMOOTHING, y pulse el botón MENU de nuevo.
Aparece la indicación ZOOM/SMOOTHING.
1 Pulse el botón MENU.
Aparece la indicación en pantalla MENU.
MENU
MENU
MENU
OK
MENU
SALIR
FASE
ANCHO
CENTRADO
ZOOM/SMOOTHING
COLOR
LANGUAGE
OPCION
ZOOM
ZOOM
/SMOOTHING
FULL1
FULL2
REAL
SMOOTHING
3 Pulse los botones ˘/≥ para seleccionar ZOOM.
2 Pulse los botones ˘/≥ para seleccionar ZOOM/
SMOOTHING y vuelva a pulsar el botón MENU.
Aparece la indicación en pantalla ZOOM/
SMOOTHING.
ZOOM
/SMOOTHING
ES
ZOOM
SMOOTHING
FULL1
FULL2
REAL
MENU
4 Pulse los botones +/– para seleccionar el modo
apropiado.
ZOOM
ZOOM
/SMOOTHING
FULL1
FULL2
REAL
SMOOTHING
La indicación desaparece automáticamente transcurridos
unos 30 segundos.
Para cerrar la indicación en pantalla, pulse el botón MENU
dos veces.
3 Pulse los botones ˘/≥ para seleccionar SMOOTHING.
ZOOM
/
SMOOTHING
ZOOM
SMOOTHING
STANDARD
TEXT
GRAPHICS
Para mostrar la imagen en pantalla completa
Seleccione “FULL 1” en el paso 4.
4 Pulse los botones +/– para seleccionar el modo
apropiado.
Si la imagen visualizada en FULL 1 o FULL2
no es uniforme
Utilice la función de alisado de la imagen. El efecto de
alisado se torna más intenso en el siguiente orden: TEXT n
STANDARD n GRAPHICS. Tenga en cuenta que las
señales de resolución 1280 × 1024 aparecen solamente en el
modo REAL y no es posible emplear SMOOTHING.
Una vez ajustado el alisado, el valor se almacenará en la
memoria para la señal de entrada actual.
La indicación en pantalla desaparece automáticamente
pasados unos 30 segundos.
Para cerrar la indicación en pantalla, pulse el botón MENU
dos veces.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Personalización del monitor
Cambio o ajuste de la
temperatura del color
Cambio de la posición de las
indicaciones en pantalla
La temperatura del color está ajustada de fábrica en 9300K.
Es posible cambiar la temperatura del color a 6500K o
5000K. Utilice esta función para ajustar la temperatura del
color de forma que coincida con los colores reales de una
imagen impresa.
Es posible cambiar la posición de las indicaciones en
pantalla (por ejemplo, si desea ajustar la imagen detrás de la
indicación en pantalla).
1 Pulse el botón MENU.
Una vez ajustada la temperatura del color, se almacenará en
la memoria para todas las señales de entrada recibidas.
Aparece la indicación MENU.
MENU
MENU
SALIR
OK
MENU
FASE
ANCHO
CENTRADO
1 Pulse el botón MENU.
MENU
MENU
SALIR
OK
Aparece la indicación MENU.
ZOOM/SMOOTHING
COLOR
LANGUAGE
OPCION
MENU
FASE
ANCHO
CENTRADO
ZOOM/SMOOTHING
COLOR
2 Pulse los botones ˘/≥ para seleccionar COLOR, y
pulse el botón MENU de nuevo.
Aparece la indicación
2 Pulse los botones ˘/≥ para seleccionar OPCION, y
pulse el botón MENU de nuevo.
Aparece la indicación OPCION.
COLOR
COLOR.
OPCION
MENU
9300K
MENU
6500K
5000K
AJUSTE USUARIO
: 5SEC
: DESBLO
R
V
A
50
50
50
POSICION MENU H
3 Pulse los botones ˘/≥ para seleccionar la
temperatura del color.
3 Pulse los botones ˘/≥ para seleccionar
(POSICION
Si es preciso realizar otros ajustes en la temperatura del
color seleccionada, proceda con el paso 4.
En caso contrario, pulse el botón MENU. Aparece la
indicación MENU.
MENU H) o
(POSICION MENU V).
Para ajustar la posición
vertical
Para ajustar la posición
horizontal
OPCION
OPCION
4 Pulse los botones ˘/≥ para seleccionar R (rojo) o A
(azul), y pulse los botones +/– para obtener el color
que desee.
: 5SEC
: DESBLO
: 5SEC
: DESBLO
El color cambia en tanto los componentes R o A
aumenten o disminuyan con respecto a V (verde).
POSICION MENU H
POSICION MENU V
COLOR
9300K
6500K
4 Pulse los botones +/– para desplazar la indicación en
pantalla hasta la posición que desee.
5000K
AJUSTE USUARIO
R
V
A
50
50
50
La indicación desaparece automáticamente transcurridos
unos 30 segundos.
Para cerrar la indicación en pantalla, pulse el botón MENU
dos veces.
La indicación OPCION desaparece automáticamente
transcurridos unos 30 segundos.
Para cerrar la indicación en pantalla, pulse el botón MENU
dos veces.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Personalización del monitor
Ajuste de la luz de fondo
Ajuste del espacio de tiempo de
retardo de ahorro de energía
Si la pantalla presenta demasiado brillo al utilizar el monitor
en una sala oscura, ajuste la luz de fondo.
Es posible ajustar el espacio de tiempo de retardo antes de
que el monitor entre en el modo de ahorro de energía.
Consulte la página 17 para obtener más información sobre la
característica de ahorro de energía de este monitor.
1 Pulse el botón MENU.
Aparece la indicación MENU.
MENU
MENU
SALIR
OK
MENU
1 Pulse el botón MENU.
FASE
ANCHO
CENTRADO
ZOOM/SMOOTHING
COLOR
LANGUAGE
OPCION
Aparece la indicación MENU.
MENU
MENU
SALIR
OK
MENU
FASE
ANCHO
CENTRADO
ZOOM/SMOOTHING
COLOR
LANGUAGE
OPCION
2 Pulse los botones ˘/≥ para seleccionar OPCION, y
pulse el botón MENU de nuevo.
Aparece la indicación OPCION.
2 Pulse los botones ˘/≥ para seleccionar OPCION, y
vuelva a pulsar el botón MENU.
OPCION
MENU
Aparece la indicación OPCION.
OPCION
: 5SEC
: DESBLO
MENU
ES
POSICION MENU H
: 5SEC
: DESBLO
3 Pulse los botones ˘/≥ para seleccionar
POSICION MENU H
(RETROILUMINACION).
OPCION
ZZ...
3 Pulse los botones ˘/≥ para seleccionar
(RETARDO A. ENERG).
26
OPCION
: DESBLO
60MIN
1MIN
5SEC
NO
RETROILUMINACION
4 Pulse los botones +/– para ajustar el nivel de luz.
RETARDO A. ENERG
4 Pulse los botones +/– para seleccionar el espacio de
tiempo que desee.
La indicación OPCION desaparece automáticamente
transcurridos unos 30 segundos.
Para cerrar la indicación en pantalla, pulse el botón MENU
dos veces.
Si RETARDO A. ENERG está ajustado en NO, el
monitor no entrará en el modo de ahorro de energía.
La indicación OPCION desaparece automáticamente
transcurridos unos 30 segundos.
Para cerrar la indicación en pantalla, pulse el botón MENU
dos veces.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Personalización del monitor
Bloqueo de los controles
Restauración de los ajustes
La función de bloqueo de los controles desactiva todos los
controles excepto el interruptor u (encendido), MENU y
algunos botones más del panel frontal.
Es posible recuperar los valores ajustados en fábrica de
todos los ajustes.
La temperatura del color se reajusta en 9300K, el ajuste de
zoom en el modo FULL 1 y el espacio de tiempo de retardo
de ahorro de alimentación en 5 segundos. El bloqueo de los
controles se cancela. El resto de los ajustes recuperan el
valor por omisión. No obstante, el idioma en pantalla no
cambia.
Una vez seleccione “BLOQ”, podrá seleccionar solamente
los siguientes elementos en la indicación MENU:
• SALIR
• BLOQUEO DE AJUS y AJUSTES DE ORIGEN en la
indicación OPCION
1 Pulse el botón MENU.
MENU
MENU
SALIR
OK
Si pulsa cualquier botón bloqueado, aparecerá la marca
en la pantalla.
Aparece la indicación MENU.
FASE
ANCHO
CENTRADO
ZOOM/SMOOTHING
COLOR
LANGUAGE
OPCION
MENU
1 Pulse el botón MENU.
MENU
MENU
SALIR
OK
Aparece la indicación MENU.
MENU
FASE
ANCHO
CENTRADO
ZOOM/SMOOTHING
2 Pulse los botones ˘/≥ para seleccionar OPCION, y
vuelva a pulsar el botón MENU.
2 Pulse los botones ˘/≥ para seleccionar OPCION, y
vuelva a pulsar el botón MENU.
Aparece la indicación OPCION.
Aparece la indicación
OPCION.
OPCION
OPCION
MENU
MENU
: 5SEC
: DESBLO
: 5SEC
: DESBLO
POSICION MENU H
3 Pulse los botones ˘/≥ para seleccionar
(BLOQUEO DE AJUS).
3 Pulse los botones ˘/≥ para seleccionar ? (AJUSTES
OPCION
DE ORIGEN).
OPCION
DESBLO
BLOQ
:
5SEC
SI
BLOQUEO DE AJUS
AJUSTES DE ORIGEN
4 Pulse el botón – para seleccionar BLOQ.
4 Pulse el botón +.
La indicación OPCION desaparece automáticamente
transcurridos unos 30 segundos.
Para cerrar la indicación en pantalla, pulse el botón MENU
dos veces.
Para cancelar el bloqueo de los controles
La indicación OPCION desaparece automáticamente
transcurridos unos 30 segundos.
Para cerrar la indicación en pantalla, pulse el botón MENU
dos veces.
Pulse el botón + en el paso 4 para seleccionar DESBLO.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
In fo rm a ció n co m p le m e n t a ria
Modo de consumo de energía
Consumo de
energía
Indicador
u
Modos predefinidos y de usuario
Funcionamiento normal
Espera (1er modo)
≤ 48 W
Verde
1
2
Este monitor dispone de modos predefinidos de fábrica
correspondientes a los estándar más comunes del sector de
auténtica compatibilidad “plug and play”.
(Consulte el Appendix para ver una lista de los modos
predefinidos de fábrica.)
Al recibirse una nueva señal de entrada, el monitor
selecciona el modo apropiado predefinido de fábrica y
ajusta momentáneamente el calibre de fase para mostrar
imágenes de alta calidad en el centro de la pantalla. El
calibre se almacena en la memoria y se recupera
inmediatamente cuando se recibe la misma señal de
entrada.
≤ 15 W
Verde y naranja
alternados
Reposo (2º modo)
(reposo)*
≤ 15 W
Verde y naranja
alternados
3
4
Activo-inactivo (3er modo)** ≤ 1 W
(reposo profundo)*
Naranja
Alimentación-desactivada
≤ 1 W
Apagado
Apagado
5
6
Alimentación principal
desactivada
0 W
*
“Reposo” y “reposo profundo” son modos de ahorro de energía
definidos por la Agencia de protección del medio ambiente.
Con respecto a las señales de entrada que no se
correspondan con ninguno de los modos predefinidos de
fábrica, la tecnología Multiscan digital de este monitor
realiza todos los ajustes necesarios con el fin de garantizar
imágenes nítidas para cualquier sincronización dentro del
margen de frecuencias del monitor. No obstante, es posible
que sea necesario ajustar con precisión el centrado vertical/
horizontal. Basta con pulsar el botón AUTO o con ajustar el
monitor según las instrucciones de ajuste. Los ajustes se
almacenan automáticamente como modo de usuario y se
recuperan al recibirse la señal de entrada correspondiente.
** Cuando el ordenador entra en el modo de ahorro de energía, la
señal de entrada se interrumpe y aparece en pantalla la
indicación NO SEÑAL. Una vez transcurrido el periodo de
tiempo definido en “Ajuste del espacio de tiempo de retardo de
ahorro de energía” (página 15), el monitor entra en el modo de
ahorro de energía.
Solución de problemas
Esta sección puede ayudarle a aislar la causa de un
problema para poder solucionarlo sin necesidad de
consultar al servicio técnico.
ES
Función de ahorro de energía
Este monitor cumple con las directrices sobre ahorro de
energía establecidas por VESA y ENERGY STAR, así como
con las normas NUTEK más estrictas.
Si el monitor se conecta a un ordenador o a una tarjeta
gráfica de vídeo que cumpla con VESA DPMS (Display
Power Management Signaling), dicho monitor reducirá
automáticamente el consumo de energía en tres etapas
como se muestra a continuación.
Mensajes en pantalla
Si se produce algún problema con la señal de entrada,
aparecerá en pantalla uno de los siguientes mensajes. Para
resolver el problema, consulte “Problemas y soluciones” en
la página 18.
INFORMATION
Es posible ajustar mediante la indicación en pantalla el
espacio de tiempo de retardo antes de que el monitor entre
en el modo de ahorro de energía. Ajuste el espacio de
tiempo según la sección “Ajuste del espacio de tiempo de
retardo de ahorro de energía” de la página 15.
FUERA DE
RANGO EXPLORACION
“FUERA DE RANGO EXPLORACION” indica que la señal de
entrada no cumple con las especificaciones del monitor.
“NO SEÑAL” indica que el monitor no recibe ninguna señal.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
In fo rm a ció n co m p le m e n t a ria
Problemas y soluciones
Si el problema está causado por el ordenador u otro equipo conectado, consulte el manual de instrucciones de dicho equipo.
Utilice la función de autodiagnóstico (página 19) si el problema no se soluciona tras seguir estas recomendaciones.
Pro b le m a
Co m p ru e b e e st o s p u n t o s
Ausencia de imagen
Si el indicador u no se ilumina • Compruebe que el cable de alimentación está correctamente conectado.
• Verifique que el interruptor u (alimentación) se encuentra en la posición de “activado”.
Si el mensaje “NO SEÑAL”
aparece en pantalla o el
• Asegúrese de que el cable de señales de vídeo está correctamente conectado y que todos los
enchufes se encuentran firmemente insertados en las tomas.
indicador u se ilumina en color • Compruebe que el ajuste de selección de entrada es el correcto.
naranja o alterna entre el verde • Verifique que los pines del conector de entrada de vídeo HD15 no están doblados ni
y el naranja
arrancados.
pProblemas causados por el ordenador u otro equipo conectado
• El ordenador se encuentra en el modo de ahorro de energía. Pulse cualquier tecla del
teclado del ordenador.
• Compruebe que el ordenador está encendido.
• Verifique que la tarjeta de vídeo está completamente insertada en la ranura apropiada del
bus.
Si el mensaje “FUERA DE
RANGO EXPLORACION”
aparece en pantalla
pProblemas causados por el ordenador u otro equipo conectado
• Compruebe que el rango de frecuencias de vídeo está dentro del especificado para el
monitor. Si ha sustituido un monitor antiguo por este, vuelva a conectar el antiguo y ajuste
el rango de frecuencias de la siguiente forma.
Horizontal: 30 a 92 kHz, Vertical: 48 a 85 Hz
Si no aparece ningún mensaje y • Utilice la función de autodiagnóstico (página 19).
el indicador u se ilumina en
verde o parpadea en naranja
Si trabaja con Windows 95/98
• Si ha sustituido un monitor antiguo por este, vuelva a conectar el antiguo y realice la
siguiente operación. Instale el disco Windows Monitor Information Disk/Utility Disk y
seleccione “CPD-L181” entre los monitores Sony en la pantalla de selección de monitores de
Windows 95/98.
Si utiliza un sistema Macintosh • Compruebe que el adaptador Macintosh y el cable de señales de vídeo están correctamente
conectados (página 6).
La imagen parpadea, salta,
oscila o aparece codificada.
• Pulse el botón AUTO. Si esto no funciona, ajuste el ancho y la fase (página 10).
• Aísle y elimine las fuentes potenciales de campos eléctricos o magnéticos, como otros
monitores, impresoras láser, ventiladores eléctricos, aparatos de iluminación fluorescente o
televisores.
• Aleje el monitor de los cables eléctricos o coloque un protector magnético cerca del monitor.
• Enchufe el monitor en otra toma de CA, preferiblemente en un circuito distinto.
• Gire el monitor 90° hacia la izquierda o derecha.
pProblemas causados por el ordenador u otro equipo conectado
• Consulte el manual de la tarjeta de vídeo para averiguar el ajuste apropiado del monitor.
• Verifique que este monitor admite el modo gráfico (VESA, Macintosh 21" Color, etc.) y la
frecuencia de la señal de entrada (Appendix). Incluso si la frecuencia está dentro del margen
apropiado, los impulsos de sincronización de algunas tarjetas de vídeo pueden ser
demasiado estrechos para que este monitor se sincronice correctamente.
• Ajuste la frecuencia de barrido (frecuencia vertical) del ordenador para obtener la mejor
imagen posible.
La imagen es borrosa.
La imagen es oscura.
• Pulse el botón AUTO. Si el problema no se resuelve, ajuste el ancho y la fase (página 10).
• Ajuste el brillo y contraste (página 12).
• Ajuste la luz de fondo (página 15)
• Ajuste el brillo (página 12).
• El monitor tarda varios segundos en calentarse después de conectar la alimentación. La
imagen aparecerá momentáneamente.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
In fo rm a ció n co m p le m e n t a ria
Pro b le m a
Co m p ru e b e e st o s p u n t o s
Aparecen imágenes fantasma.
• No utilice cables prolongadores de vídeo y/o cajas de conmutación de vídeo.
• Compruebe que todos los enchufes están firmemente insertados en las tomas.
La imagen no está centrada o
no tiene el tamaño correcto.
• Pulse el botón AUTO (página 10).
• Ajuste el tamaño (página 12) o centrado (página 11). Tenga presente que algunos modos de
vídeo no llenan la pantalla hasta los bordes.
Se aprecian patrones
ondulados o elípticos (muaré).
• Ajuste el ancho y la fase (página 10).
El color no es uniforme.
• Pulse el botón AUTO. Si esto no funciona, ajuste el ancho y la fase (página 10).
• Ajuste la temperatura de color (página 14).
El blanco no parece blanco.
Los botones del monitor no
funcionan.
• Si el bloqueo de los controles está ajustado en BLOQ, ajústelo en DESBLO (página 16).
Si e l in d ica d o r u (a lim e n t a ció n ) p a rp a d e a
e n n a ra n ja
Funcion de autodiagnostico
Este monitor dispone de una funcion de autodiagnostico. Si
existe algun problema con el monitor o con el ordenador u
ordenadores, la pantalla se mostrara en blanco y el
indicador u(alimentación) se iluminará en verde o
parpadeará en naranja. Si el indicador u(alimentación) se
ilumina en naranja, significa que el ordenador se encuentra
en el modo de ahorro de energia. Pulse cualquier tecla del
teclado.
Pulse el botón u (alimentación) para apagar y encender
el monitor.
Si el indicador u(alimentación) se ilumina en verde,
significa que el monitor funciona correctamente.
Si el indicador u(alimentación) sigue parpadeando,
significa que hay un fallo potencial del monitor. Cuente el
número de segundos entre los parpadeos en naranja del
indicador u(alimentación) e informe al proveedor Sony
autorizado sobre el estado del monitor. Asegúrese de anotar
el nombre del modelo y el número de serie de dicho
monitor. Tome nota también del fabricante y el modelo del
ordenador y de la tarjeta de gráfica.
ES
Indicador u
(alimentación)
Visu a liza ció n d e la in d ica ció n
INFORMATION
Si e l in d ica d o r u (a lim e n t a ció n ) e st á
ilu m in a d o e n ve rd e
Puede comprobar el nombre, número de serie y año de
fabricación de este monitor.
1 Desconecte el cable o cables de señales de vídeo.
2 Antes de que el monitor entre en el modo de ahorro
de energía, pulse el botón + y manténgalo pulsado
durante 2 segundos.
Pulse y mantenga pulsado el botón MENU durante cinco
segundos.
Aparece la indicación INFORMATION.
Ejemplo
INFORMATION
Nombre del modelo
MODEL : CPD-L181
SER NO : 1234567
Número de serie
Si aparecen las cuatro barras de color (blanco, rojo, verde,
azul), significa que el monitor funciona correctamente.
Vuelva a conectar los cables de entrada de video y
compruebe el estado del ordenador u ordenadores.
MANUFACTURED : 1999-52
Semana y año de
fabricación
Si las barras de color no aparecen, significa que hay un fallo
potencial del monitor. Informe al proveedor Sony
autorizado del estado del monitor.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
In fo rm a ció n co m p le m e n t a ria
Asignación de pines …1/…2
Especificaciones
1
5 4 3 2
Panel LCD
Tipo: Matriz activa a-Si TFT
Tamaño de imagen: 18,1 pulgadas
(46 cm)
10 9 8
15 14 13 12 11
7
6
Formato de señal de entrada
Frecuencia de funcionamiento
Pin nº Señal
Pin nº Señal
1
2
Roja
8
Masa azul
RGB*
fh: 30 – 92 kHz
fv: 48 – 85 Hz
Verde
9
DDC + 5V*
Masa
(sincronización en
verde compuesta)
10
11
12
Eficiencia de los pixeles 99,99 %
Identificación (masa)
Resolución
H: máx. 1280 puntos
V: máx. 1024 líneas
3
4
5
6
7
Azul
Datos bidireccionales
(SDA)*
Identificación (masa)
Masa DDC*
Masa roja
Requisitos de alimentación
CA 100 – 240 V, 50 – 60 Hz,
13
14
15
Sincronización H.
Sincronización V.
Reloj de datos (SCL)*
1,0 – 0,6 A
Máx. 48 W
Consumo de energía
Masa verde
Dimensiones (an/al/prf)
*
Norma de canal de datos de visualización (DDC) de VESA
Incluido el soporte:
Aprox. 468 × 422 × 207,5 mm
Sólo monitor:
Aprox. 468 × 354,5 × 90 mm
Aprox. 9 kg, incluido el
soporte
Peso
Plug & Play
DDC/DDC2B/DDC2Bi
Accesorios suministrados
Consulte la página 6.
* Co n d icio n e s d e sin cro n iza ció n h o rizo n t a l y
ve rt ica l re co m e n d a d a s
El factor de ancho de sincronización horizontal debe ser superior a
4,8% del tiempo total horizontal o 0,8 µseg, según el que sea mayor.
El ancho de supresión horizontal debe ser superior a 2,5 µseg.
El ancho de supresión vertical debe ser superior a 450 µseg.
Diseño y especificaciones sujetos a cambios sin previo aviso.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
INDICE
Operazioni preliminari
Precauzioni ............................................................................................................................4
Identificazione delle parti e dei comandi ..........................................................................5
Installazione ...........................................................................................................................6
Accensione del monitor e del computer ............................................................................8
Selezione del segnale di ingresso .......................................................................................8
Personalizzazione del monitor
Presentazione del sistema di visualizzazione a schermo................................................9
Selezione della lingua per la visualizzazione a schermo ................................................9
Regolazione automatica dell’immagine ..........................................................................10
Eliminazione manuale del tremolio o della sfocatura ...................................................10
Regolazione della posizione dell’immagine ...................................................................11
Regolazione della luminosità dell’immagine .................................................................12
Regolazione del contrasto..................................................................................................12
Modifica delle dimensioni dell’immagine secondo il segnale .....................................12
Modifica o regolazione della temperatura di colore......................................................14
Modifica della posizione della videata ............................................................................14
Regolazione della retroilluminazione ..............................................................................15
Impostazione del ritardo della funzione di risparmio energetico ...............................15
Blocco dei comandi .............................................................................................................16
Reimpostazione delle regolazioni ....................................................................................16
IT
Informazioni aggiuntive
Modi preimpostati e modi utente.....................................................................................17
Guida alla soluzione dei problemi ...................................................................................17
Caratteristiche tecniche ......................................................................................................20
Appendix
Preset Mode Timing Table .................................................................................................. i
TCO’99 Eco-document ......................................................................................................... i
•
•
•
•
Macintosh è un marchio di fabbrica su licenza di Apple Computer,
Inc., registrato negli U.S.A. e negli altri paesi.
Windows® e MS-DOS sono marchi di fabbrica registrati di Microsoft
Corporation negli U.S.A. e negli altri paesi.
IBM PC/AT e VGA sono marchi di fabbrica registrati di IBM
Corporation negli U.S.A.
VESA è un marchio di fabbrica di Video Electronics Standard
Association.
• ENERGY STAR è un marchio di fabbrica registrato negli U.S.A.
•
Tutti gli altri nomi dei prodotti menzionati all’interno del manuale
possono essere marchi di fabbrica o marchi di fabbrica registrati delle
loro rispettive compagnie.
•
Inoltre, “™” e “®” non vengono in questo manuale menzionati per
ciascun caso.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Op e ra zio n i p re lim in a ri
Manutenzione
Precauzioni
• Pulire il rivestimento, il pannello e i comandi con un
panno morbido leggermente inumidito con una soluzione
detergente delicata. Non usare alcun tipo di spugnette o
polveri abrasive né solventi, quali alcool o benzina.
• Non strofinare, toccare o picchiare la superficie dello
schermo con oggetti abrasivi o appuntiti quali penne a
sfera o cacciaviti, onde evitare di graffiare il cinescopio a
colori.
• Pulire lo schermo con un panno morbido. Se si usa un
liquido detergente per i vetri, non usare detergenti
che contengano soluzioni antistatiche o additivi simili, in
quanto potrebbero graffiare la pellicola protettiva dello
schermo.
Installazione
• Consentire una circolazione d’aria sufficiente per evitare il
surriscaldamento interno. Non posizionare il monitor
sopra tessuti o coperte oppure vicino a materiali, quali
tappeti o tendaggi, che potrebbero ostruire le prese di
ventilazione.
• Non installare il monitor vicino a fonti di calore, quali
radiatori o condotti d’aria oppure in luoghi soggetti alla
luce diretta del sole, a polvere eccessiva, a scosse o
vibrazioni meccaniche.
• Non posizionare il monitor vicino ad apparecchiature che
generano campi magnetici, quali trasformatori o linee di
alimentazione ad alta tensione.
Trasporto
• Durante il trasporto del monitor, afferrare saldamente il
fondo dello schermo con entrambe le mani, onde evitare
di far cadere il monitor danneggiandolo o arrecando
danni alla propria persona.
• Durante il trasporto del monitor per eventuali riparazioni
o spedizioni, usare i materiali di imballaggio originali.
Cura dello schermo LCD
• Sullo schermo LCD potrebbero apparire punti luminosi
(rossi, blu o verdi). Non si tratta di un problema di
funzionamento. Lo schermo LCD è stato creato
secondo una tecnologia di alta precisione e più del
99,99% degli elementi dell’immagine rimane intatto.
Tuttavia, alcuni elementi dell’immagine potrebbero
non apparire o apparire in maniera costante.
• Non lasciare lo schermo LCD rivolto verso il sole in
quanto potrebbe danneggiarsi. Fare quindi attenzione
quando si posiziona il monitor vicino ad una finestra.
• Non premere o graffiare lo schermo LCD e non poggiarvi
sopra oggetti pesanti, onde evitare che lo schermo perda
uniformità.
Avvertenza per il collegamento
dell’alimentazione
• Usare un cavo di alimentazione adatto alla rete di
alimentazione locale.
PericlientinegliStatiUniti
Se non viene utilizzato l’apposito cavo, questo monitor
non sarà conforme agli standard obbligatori FCC.
Per i clienti nel Regno Unito
• Se il monitor viene usato in un ambiente freddo, sullo
schermo potrebbe apparire un’immagine residua. Non si
tratta di un problema di funzionamento e lo schermo
tornerà normale non appena il monitor si sarà riscaldato.
• Se un fermo immagine viene visualizzato per un lungo
periodo, potrebbe apparire un’immagine residua che poi
scomparirà.
Se si usa il monitor nel Regno Unito, usare il cavo in
dotazione con la spina per il Regno Unito.
Esempi di tipi di spina
• Il riscaldamento dello schermo e del rivestimento durante
l’utilizzo non è sintomo di un problema di
funzionamento.
per CA da 100 a 120 V per CA da 200 a 240 V solo per CA
a 240 V
La presa deve essere installata vicino
all’apparecchiatura e facilmente accessibile.
Sostituzione del tubo fluorescente
L’apparato di illuminazione di questo monitor dispone di
uno speciale tubo fluorescente. Se lo schermo LCD diventa
scuro, instabile o non si accende, sostituire il tubo
fluorescente con uno nuovo. Per la sostituzione del tubo
fluorescente rivolgersi al rivenditore Sony locale.
Smaltimento del monitor
• Per lo smaltimento del monitor non usare i cassonetti
per rifiuti ordinari.
Non gettare il monitor insieme ai rifiuti domestici.
• Il tubo fluorescente contiene mercurio. Per lo
smaltimento del monitor attenersi alle norme
dell’autorità sanitaria locale.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Op e ra zio n i p re lim in a ri
Identificazione delle parti e dei
comandi
Per maggiori informazioni vedere le pagine fra parentesi.
Lato anteriore
Lato posteriore
1
2
POWER
MENU
3
8
4
AUTO
5
6
7
9
*
!º
1 In t e rru t t o re e in d ica t o re u (a cce n sio n e )
(p a g in e 8, 17)
7 In t e rru t t o re e in d ica t o re d i in g re sso …1, 2
(p a g in a 8)
Per accendere e spegnere il monitor.
Seleziona il segnale di ingresso da …1 o …2. Ogni
volta che si preme il tasto, l’ingresso cambia
alternativamente e l’indicatore corrispondente si
accende.
Quando il monitor viene acceso l’indicatore si illumina
in verde, mentre lampeggia in verde e in arancione
oppure si illumina in arancione quando il monitor è nel
modo di risparmio energetico.
IT
8 In t e rru t t o re POWER (a cce n sio n e
p rin cip a le ) (p a g in a 8)
2 Ta st o MENU (m e n u ) (p a g in e 9 – 16, 19)
Per visualizzare a schermo la videata MENU.
Per accendere l’alimentazione principale, premere il lato
“–”. Per spegnerla, premere il lato “®”.
3 Ta st o ¨ (lu m in o sit à ) (˘) (p a g in e 9 – 16)
Per regolare la luminosità dell’immagine.
9 Co n n e t t o ri d i in g re sso …1/…2 (HD15)
(p a g in e 6, 8)
Funziona come il tasto ˘ per la selezione delle voci di
menu.
Segnali video RGB analogici di ingresso (0,714 Vp-p,
positivo) e segnali SYNC.
4 Ta st o > (co n t ra st o ) (≥) (p a g in e 9 – 16)
!º Co n n e t t o re AC IN (p a g in a 6)
Fornisce l’alimentazione CA al monitor dalla presa di
rete.
Per regolare il contrasto.
Funziona come il tasto ≥ per la selezione delle voci di
menu.
* Questo connettore viene utilizzato solo dal personale
dell’assistenza. Non collegare nulla a questa presa.
5 Ta st i +/– (re g o la zio n e ) (p a g in e 11 – 16)
Per regolare le voci di menu selezionate.
6 Ta st o AUTO (p a g in a 10)
Quando il segnale proveniente dal computer viene
visualizzato su questo monitor, premere il tasto AUTO
per regolare automaticamente l’immagine.
È inoltre necessario premere questo tasto se l’immagine
non è centrata o se è sfocata.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Op e ra zio n i p re lim in a ri
Collegamento ad un computer Macintosh
Installazione
Usare l’adattatore Macintosh in dotazione.
Prima di usare questo monitor, verificare che
nell’imballaggio siano compresi i seguenti elementi:
• Monitor LCD (1)
• Coperchio posteriore (1)
• Cavo di alimentazione (1)
a …1 o …2
• Cavo del segnale video HD15 (1)
• Adattatore Macintosh (1)
• Windows Monitor Information Disk/Utility Disk (1)
• Macintosh Utility Disk (1)
• Scheda garanzia (1)
Computer
Macintosh o
compatibile
Cavo del segnale
video HD15
(in dotazione)
all’uscita monitor
• Queste istruzioni per l’uso (1)
Punto 1: Collegamento del monitor al
computer
Adattatore Macintosh
(in dotazione)
*
Prima di collegare il cavo, collegare al computer l’adattatore del
Macintosh in dotazione. Questo adattatore è compatibile con i
computer serie Macintosh LC, Performa, Quadra, Power
Macintosh e Power Macintosh G3 (acquistati prima di gennaio
del 1999). Se si effettua il collegamento ad un computer serie
Power Macintosh G3 acquistato dopo il gennaio del 1999, è
necessario utilizzare un adattatore diverso (non in dotazione).
Per i computer Macintosh II ed alcune versioni precedenti dei
modelli PowerBook potrebbe essere necessario un adattatore con
microinterruttori (non in dotazione).
Spegnere il monitor e il computer prima di effettuare i
collegamenti.
Collegamento ad un computer IBM PC/AT o
compatibile
a …1 o …2
Punto 2: Collegamento del cavo di
alimentazione
Computer IBM
PC/AT o
compatibile
Con il monitor e il computer spenti, collegare un’estremità
del cavo di alimentazione CA al monitor e l’altra estremità
ad una presa di alimentazione.
Cavo del segnale
video HD15
(in dotazione)
all’uscita monitor
a AC IN
Se il sist e m a d e l PC in u so n o n d isp o n e d e lla
co m p a t ib ilit à Plu g & Pla y (DDC2B e DDC2Bi)
Questo monitor usa il piedino N. 9 per il connettore del segnale
video per la compatibilità Plug & Play (DDC2B e DDC2Bi). Per la
posizione del piedino N. 9, vedere a pagina 20.
ad una presa di
rete
•
Se il computer accetta il piedino N. 9, utilizzare il cavo del
segnale video HD15 in dotazione.
Se il computer non accetta il piedino N. 9, rivolgersi al proprio
rivenditore per informazioni su come ottenere un adattatore
HD15.
Cavo di
alimentazione
(in dotazione)
•
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Op e ra zio n i p re lim in a ri
3 Girarelaviteperfissareilcoperchioposteriore.
Punto 3: Installazione del coperchio
posteriore
Dopo aver collegato il computer e il cavo di alimentazione,
installare il coperchio posteriore in dotazione.
Accertarsi che lo schermo rimanga in posizione verticale
durante l’installazione del coperchio posteriore.
1 Agganciareilcavodelcomputereilcavodi
alimentazione.
Sbloccato
Bloccato
Regolazione dell’inclinazione
È possibile regolare l’inclinazione del monitor fino a 30° in
verticale e 45° verso destra o verso sinistra. Tuttavia, è
possibile ottenere la migliore visualizzazione inclinando il
monitor in verticale di 5° o più.
Per girare il monitor, tenerlo con entrambe le mani nella
parte inferiore come illustrato di seguito.
2 Premerelapartesuperioredelcoperchioposteriore
controlapartesuperiorediaggancio,quindi
spingeredentroilcoperchio.
IT
30°
1
2
45°
45°
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Op e ra zio n i p re lim in a ri
Pe r g li u t e n t i d i Win d o w s NT4.0
L’impostazione del monitor in Windows NT4.0 è differente da
Windows 95/98 e non occorre effettuare la selezione del tipo di
monitor. Per informazioni dettagliate sulla regolazione della
risoluzione, frequenza di refresh e numero di colore, consultare le
istruzioni per l’uso di Windows NT4.0.
Accensione del monitor e del
computer
1 Premerel’interruttorePOWERsullato“–”.
POWER
Re g o la zio n e d e lla riso lu zio n e d e l m o n it o r e d e l
n u m e ro d i co lo re
Regolare la risoluzione del monitor e il numero di colore facendo
riferimento alle istruzioni per l’uso del proprio computer. Il numero
di colore può variare in base al computer o alla scheda grafica.
L’impostazione della tavolozza dei colori e il numero reale dei
colori è descritto qui di seguito:
•
•
High Color (16 bit) n 65.536 colori
True Color (24 bit) n circa 16,77 milioni di colori
2 Premerel’interruttore u.
Nel modo True Color (24 bit), la velocità potrebbe essere inferiore.
Selezione del segnale di ingresso
È possibile collegare due computer a questo monitor
utilizzando i connettori HD 15. Per passare da un computer
all’altro, utilizzare il tasto ….
3 Accendereilcomputer.
L’installazione del monitor è completata.
Se necessario, usare i comandi del monitor per regolare
l’immagine.
Se non viene visualizzata alcuna immagine sullo
schermo
Computer
collegato a …2
•
•
Verificare che il monitor sia collegato correttamente al computer.
Se non viene visualizzato il messaggio “NO INPUT SIGNAL”
sullo schermo, provare a cambiare il segnale di ingresso e
controllare che la scheda grafica del computer sia posizionata
completamente nell’alloggiamento del bus corretto.
Se si sostituisce un vecchio monitor con questo modello e sullo
schermo appare il messaggio “OUT OF SCAN RANGE”,
ricollegare il vecchio monitor. Quindi regolare la scheda grafica
del computer in modo che la frequenza orizzontale si trovi tra 30
– 92 kHz, la frequenza verticale tra 40 – 85 Hz e la risoluzione sia
1280 x 1024 o inferiore.
collegato a …1
Premereiltasto ….
•
Il segnale di ingresso e l’indicatore dell’ingresso
corrispondente cambiano ogni volta che si preme questo
tasto.
Per ulteriori informazioni sui messaggi a schermo, vedere “Guida
alla soluzione dei problemi” a pagina 18.
Pe r g li u t e n t i d i Win d o w s 95/98
Per potenziare al massimo il monitor, installare sul proprio
computer il nuovo file di informazioni sul modello dal disco
Windows Monitor Information Disk/Utility Disk.
No t a
Questo monitor è conforme allo standard Plug & Play “VESA
DDC”. Se la scheda grafica/PC è conforme a DDC, selezionare
“Plug & Play Monitor (VESA DDC)” o il nome del modello di
questo monitor come tipo de monitor dal “Control Panel” di
Windows 95/98. Alcune schede grafiche/PC non sono conformi a
DDC. Se la scheda grafica/PC ha difficoltà a comunicare con
questo monitor, caricare il disco Windows Monitor Information
Disk/Utility Disk e selezionare il nome del modello di questo
monitor come tipo di monitor.
Se il computer che si desidera utilizzare viene riavviato o il
computer si trova nella modalità di risparmio energetico, il monitor
può passare automaticamente all’altro segnale del connettore. In
questo caso, selezionare manualmente il segnale desiderato
utilizzando il tasto ….
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Personalizzazione del monitor
OPZIONI
Operazioni preliminari alla regolazione
Viene visualizzata la videata OPZIONI in cui è possibile
regolare le impostazioni per la retroilluminazione, la
posizione della videata, il ritardo della funzione di
risparmio energetico e il blocco dei comandi.
Collegare il monitor e il computer e quindi accenderli.
Per ottenere risultati migliori, attendere almeno 30
minuti prima di effettuare le regolazioni.
Presentazione del sistema di
visualizzazione a schermo
Selezione della lingua per la
visualizzazione a schermo
La maggior parte delle regolazioni vengono effettuate
utilizzando la videata MENU.
Per modificare la lingua per la visualizzazione a schermo,
vedere la sezione “Selezione della lingua per la
visualizzazione a schermo”.
È possibile selezionare la lingua per la visualizzazione a
schermo fra inglese, francese, tedesco, spagnolo, italiano e
giapponese.
1 Premere il tasto MENU.
Appare la videata MENU
MENU
MENU
OK
MENU
MENU
EXIT
OK
USCITA
FASE
MENU
PHASE
REG. PIXEL
PITCH
CENTRATURA
ZOOM/SMOOTHING
COLORE
CENTER
ZOOM/SMOOTHING
COLOR
LANGUAGE
OPZIONI
LANGUAGE
OPTION
USCITA
Viene chiusa la videata MENU.
2 Premere i tasti ˘/≥ per selezionare LANGUAGE e
premere il tasto MENU.
IT
FASE
Appare la videata LANGUAGE.
LANGUAGE
Viene visualizzata la videata FASE per regolare la fase
quando i caratteri o le immagini appaiono sfocati sull’intero
schermo. Regolare la fase dopo aver regolato il pixel.
ENGLISH
MENU
FRANÇAIS
DEUTSCH
ESPAÑOL
ITALIANO
REG. PIXEL
Viene visualizzata la videata REG. PIXEL per regolare il
pixel quando i caratteri o le immagini non appaiono nitidi in
alcune parti dello schermo.
CENTRATURA
3 Premere i tasti ˘/≥ per selezionare la lingua
desiderata e premere il tasto MENU.
Viene visualizzata la videata CENTRATURA per regolare la
centratura dell’immagine.
Appare la videata MENU della lingua selezionata.
MENU
MENU
OK
ZOOM/SMOOTHING
Visualizza la videata ZOOM/SMOOTHING per regolare la
nitidezza dell’immagine a seconda del rapporto di formato
o della risoluzione del segnale di ingresso.
MENU
USCITA
FASE
REG. PIXEL
CENTRATURA
ZOOM/SMOOTHING
COLORE
COLORE
LANGUAGE
OPZIONI
Viene visualizzata la videata COLORE per regolare la
temperatura di colore.
LANGUAGE
La videata scompare automaticamente dopo circa 30
secondi.
Per chiudere la videata, premere di nuovo il tasto MENU.
Viene visualizzata la videata LANGUAGE per selezionare
la lingua per la visualizzazione a schermo.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Personalizzazione del monitor
Regolazione automatica
dell’immagine
Eliminazione manuale del
tremolio o della sfocatura
Se l’immagine è tremolante o sfocata, premere il tasto
AUTO. Il monitor viene regolato automaticamente in base al
segnale del computer collegato.
Con alcuni computer potrebbero rendersi necessarie
ulteriori regolazioni fini. In questo caso, regolare il monitor
manualmente.
Se una parte dello schermo appare tremolante o sfocata,
premere il tasto AUTO. Se con questa operazione il
problema non viene risolto, regolare pixel e fase come
descritto di seguito.
Una volta regolati, pixel e fase verranno memorizzati per il
segnale di ingresso corrente.
1 Accendere il monitor.
2 Accendere il computer.
1 Impostare la risoluzione su 1280 × 1024 nel
computer.
Se la risoluzione della scheda grafica è inferiore a 1280 ×
1024, impostare ZOOM su REAL (pagina 12).
3 Premere il tasto AUTO.
Il monitor regola i pixel per adattarli al segnale di
ingresso in modo che l’immagine appaia nitida e si
adatti al centro dello schermo.
2 Caricare il dischetto Utility Disk.
Usare il dischetto appropriato per il computer.
Per Windows 95/98
Windows Monitor Information Disk/Utility Disk
Per Macintosh
AUTO
Macintosh Utility Disk
3 Avviare il dischetto Utility Disk e visualizzare il
modello di testo.
Per Windows 95/98
Fare clic su [Utility Disk] n [Windows] n [Utility.exe].
Per Macintosh
Fare clic su [Utility Disk] n [SONY-Utility].
Note
•
È possibile utilizzare questa funzione con computer che
eseguono Windows o un software di interfaccia grafica utente
simile che consenta un’immagine a schermo pieno. Se il colore di
sfondo è scuro o se l’immagine immessa non riempie lo schermo
fino ai bordi (come ad esempio un prompt di MS-DOS) è
possibile che si verifichino problemi di funzionamento.
Durante l’esecuzione della funzione di dimensionamento
automatico, lo schermo potrebbe apparire vuoto per alcuni
secondi, non si tratta comunque di un problema di
funzionamento.
4 Premere il tasto MENU.
Appare la videata MENU.
MENU
MENU
OK
USCITA
FASE
MENU
REG. PIXEL
•
CENTRATURA
ZOOM/SMOOTHING
COLORE
LANGUAGE
OPZIONI
Se l’immagine è tremolante o sfocata anche
dopo aver premuto il tasto AUTO
5 Premere i tasti ˘/≥ per selezionare REGOLAZ. PIXEL e
premere di nuovo il tasto MENU.
Regolare pixel e fase basandosi sulla sezione “Eliminazione
manuale del tremolio o della sfocatura”.
Appare la videata REGOLAZ. PIXEL.
REGOLAZ. PIXEL
Se l’immagine non si trova al centro dello
schermo anche dopo aver premuto il tasto AUTO
MENU
Effetturare la regolazione utilizzando la videata
CENTRATURA basandosi sulla sezione “Regolazione della
posizione dell’immagine”.
0
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Personalizzazione del monitor
6 Premere i tasti +/– finché i colori dello schermo non
diventano uniformi.
Regolazione della posizione
dell’immagine
Effettuare la regolazione in modo che le righe verticali
scompaiano.
Se l’immagine sullo schermo non appare centrata, premere
il tasto AUTO. Se con questa operazione il problema non
viene risolto, regolare la centratura come descritto di
seguito.
Una volta regolata, la centratura verrà memorizzata per il
segnale di ingresso corrente.
1 Avviare il dischetto Utility Disk e visualizzare il
modello di testo.
Effettuare le procedure descritte nei punti 2 e 3 della
sezione “ Eliminazione manuale del tremolio o della
sfocatura”.
7 Premere il tasto MENU.
Appare la videata MENU.
2 Premere il tasto MENU.
Se sull’intero schermo appaiono righe orizzontali,
regolare la fase seguendo il punto successivo.
Appare la videata MENU.
MENU
MENU
OK
USCITA
FASE
MENU
8 Premere i tasti ˘/≥ per selezionare FASE e premere
di nuovo il tasto MENU.
REG. PIXEL
CENTRATURA
ZOOM/SMOOTHING
COLORE
Appare la videata FASE.
LANGUAGE
OPZIONI
FASE
MENU
3 Premere i tasti ˘/≥ per selezionare CENTRATURA e
premere di nuovo il tasto MENU.
Appare la videata
4
IT
CENTRATURA
CENTRATURA.
9 Premere i tasti +/– finché i colori dello schermo non
diventano uniformi.
H
V
MENU
Effettuare la regolazione in modo che le righe orizzontali
vengano ridotte al minimo.
26
4 Spostare l’immagine in alto, in basso, a sinistra o a
destra fino a quando non scompare la cornice nel
perimetro del modello di testo.Per la regolazione
orizzontale, selezionare H usando i tasti ˘/≥ e
regolare la posizione usando i tasti +/–.
+ . . .per spostare l’immagine a destra
– . . .per spostare l’immagine a sinistra
CENTRATURA
10Una volta terminato, fare clic su [END] sullo schermo
per disattivare il modello di test.
H
V
La videata scompare automaticamente dopo circa 30
secondi.
Per chiudere la videata, premere due volte il tasto MENU.
26
Continua
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Personalizzazione del monitor
Per la regolazione verticale, selezionare V usando i
tasti ˘/≥ e regolare la posizione usando i tasti +/–.
+ . . .per spostare l’immagine verso l’alto
Regolazione del contrasto
– . . .per spostare l’immagine verso il basso
Una volta regolato, il contrasto verrà memorizzato per tutti i
segnali di ingresso ricevuti.
CENTRATURA
H
V
1 Premere il tasto > (contrasto) ≥.
Appare la videata CONTRASTO.
26
CONTRASTO
26
5 Una volta terminato, fare clic su [END] sullo schermo
per disattivare il modello di test.
48. 4kHz / 60Hz
La videata scompare automaticamente dopo circa 30
secondi.
Per chiudere la videata, premere due volte il tasto MENU.
Frequenza
orizzontale* verticale*
Frequenza
2 Premere i tasti +/–.
+ . . . per aumentare il contrasto
Regolazione della luminosità
dell’immagine
– . . . per diminuire il contrasto
Una volta regolata, la luminosità verrà memorizzata per
tutti i segnali di ingresso ricevuti.
La videata scompare automaticamente dopo circa 3 secondi.
1 Premere il tasto ¨ (luminosità) ˘.
*
Nella videata CONTRASTO appaiono le frequenze orizzontale e
verticale per il segnale di ingresso ricevuto.
Appare la videata LUMINOSITA.
LUMINOSITA
Modifica delle dimensioni
dell’immagine secondo il segnale
26
48. 4kHz / 60Hz
Il monitor è impostato in fabbrica per visualizzare
l’immagine a schermo intero indipendentemente dal modo
o dalla risoluzione dell’immagine. È possibile inoltre
visualizzare l’immagine nel rapporto di formato o nella
risoluzione reale. Notare che i segnali di risoluzione 1280 ×
1024 riempiono l’intero schermo e che non è possibile
attivare il modo ZOOM.
Frequenza
Frequenza
orizzontale* verticale*
2 Premere i tasti +/–.
+ . . . per aumentare la luminosità
– . . . per diminuire la luminosità
Una volta impostato, lo zoom verrà memorizzato per il
segnale di ingresso corrente.
FULL 1
Il segnale di ingresso viene visualizzato a schermo intero
indipendentemente dal modo o dalla risoluzione
La videata scompare automaticamente dopo circa 3 secondi.
dell’immagine.
FULL 2
*
Nella videata LUMINOSITA appaiono le frequenze orizzontale
e verticale per il segnale di ingresso ricevuto.
Il segnale di ingresso viene visualizzato sullo schermo nel
rapporto di formato reale. Di conseguenza, possono
apparire fasce nere nella parte superiore e inferiore
dell’immagine a seconda del segnale.
Se lo schermo è troppo luminoso durante la
visualizzazione in una stanza buia
Diminuire la RETROILLUMINAZ. (pagina 15).
REAL
Il segnale di ingresso viene visualizzato sullo schermo
nella risoluzione reale (i segnali Sub-SXGA vengono
visualizzati all’interno di una cornice nera al centro dello
schermo).
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Personalizzazione del monitor
funzione SMOOTHING.
1 Premere il tasto MENU.
Una volta impostata, l’omogeneità viene memorizzata nel
segnale di ingresso corrente.
MENU
MENU
OK
Appare la videata MENU.
MENU
USCITA
FASE
STANDARD
REG. PIXEL
Effetto di omogeneità standard (effetto preimpostato in
fabbrica).
TEXT
CENTRATURA
ZOOM/SMOOTHING
COLORE
LANGUAGE
OPZIONI
Per far visualizzare nitidamente i caratteri (questo modo è
adatto per le applicazioni basate su testo).
GRAPHICS
Per far visualizzare nitidamente le immagini (questo
modo è adatto per software su CD-ROM come fotografie
o illustrazioni).
2 Premere i tasti ˘/≥ per selezionare ZOOM/
SMOOTHING e premere di nuovo il tasto MENU.
Appare la videata ZOOM/SMOOTHING.
1 Premere il tasto MENU.
MENU
MENU
MENU
OK
Appare la videata MENU.
USCITA
FASE
MENU
ZOOM
ZOOM
/SMOOTHING
REG. PIXEL
CENTRATURA
ZOOM/SMOOTHING
COLORE
LANGUAGE
OPZIONI
FULL1
FULL2
REAL
SMOOTHING
3 Premere i tasti ˘/≥ per selezionare ZOOM.
2 Premere i tasti ˘/≥ per selezionare ZOOM/
SMOOTHING e premere di nuovo il tasto MENU.
Appare la videata ZOOM/SMOOTHING.
ZOOM
/SMOOTHING
IT
ZOOM
FULL1
FULL2
REAL
SMOOTHING
MENU
ZOOM
ZOOM
/SMOOTHING
4 Premere i tasti +/– per selezionare il modo
desiderato.
FULL1
FULL2
REAL
SMOOTHING
3 Premere i tasti ˘/≥ per selezionare SMOOTHING.
ZOOM
/
SMOOTHING
La videata scompare automaticamente dopo circa 30
secondi.
Per chiudere la videata, premere due volte il tasto MENU.
ZOOM
SMOOTHING
STANDARD
TEXT
GRAPHICS
Per visualizzare l’immagine a schermo pieno
Selezionare “FULL 1” al punto 4.
4 Premere i tasti +/– per selezionare il modo
desiderato.
Se l’immagine visualizzata nel modo FULL 1
o FULL 2 non è omogenea
La videata scompare automaticamente dopo circa 30
secondi.
Per chiudere la videata, premere due volte il tasto MENU.
Usare la funzione di omogeneità dell’immagine. L’effetto di
omogeneità è via via maggiore a seconda che si selezioni,
nell’ordine, TEXT n STANDARD n GRAPHICS. Notare
che i segnali di risoluzione 1280 × 1024 vengono mostrati
solo nel modo REAL e che non è possibile attivare la
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Personalizzazione del monitor
Modifica o regolazione della
temperatura di colore
Modifica della posizione della
videata
La temperatura di colore è impostata in fabbrica su 9300K.
È possibile modificare la temperatura di colore
impostandola su 6500K o 5000K. Usare questa funzione per
regolare la temperatura di colore in modo che corrisponda
ai colori reali di un’immagine stampata.
È possibile modificare la posizione della videata, ad
esempio quando si desidera regolare l’immagine che vi sta
dietro.
1 Premere il tasto MENU.
Una volta regolata, la temperatura di colore verrà
memorizzata per tutti i segnali di ingresso ricevuti.
Appare la videata MENU.
MENU
MENU
OK
USCITA
FASE
MENU
1 Premere il tasto MENU.
REG. PIXEL
MENU
MENU
OK
Appare la videata MENU.
CENTRATURA
ZOOM/SMOOTHING
COLORE
LANGUAGE
OPZIONI
USCITA
FASE
MENU
REG. PIXEL
CENTRATURA
ZOOM/SMOOTHING
COLORE
2 Premere i tasti ˘/≥ per selezionare OPZIONI e
premere di nuovo il tasto MENU.
2 Premere i tasti ˘/≥ per selezionare COLORE e
premere di nuovo il tasto MENU.
Appare la videata OPZIONI.
Appare la videata COLORE.
OPZIONI
COLORE
MENU
9300K
6500K
5000K
MENU
: 5SEC
MODALITA' UTENTE
: SBLOC
R
V
B
50
50
50
POSIZ MENU ORIZ
3 Premere i tasti ˘/≥ per selezionare la temperatura di
colore.
3 Premere i tasti ˘/≥ per selezionare
(POSIZ MENU
ORIZ) o
(POSIZ MENU VERT).
Se occorre effettuare ulteriori regolazioni della
temperatura di colore selezionata, passare al punto 4.
In caso contrario, premere il tasto MENU. Appare la
videata MENU.
Per regolare la posizione
verticale
Per regolare la posizione
orizzontale
OPZIONI
OPZIONI
4 Premere i tasti ˘/≥ per selezionare R (rosso) o B (blu)
e premere i tasti +/– per ottenere il colore desiderato.
Il colore cambia con l’aumentare o il diminuire dei
componenti R o B rispetto a V (verde).
: 5SEC
: SBLOC
: 5SEC
: SBLOC
POSIZ MENU ORIZ
POSIZ MENU VERT
COLORE
9300K
6500K
4 Premere i tasti +/– per spostare le videata sulla
posizione desiderata.
5000K
MODALITA' UTENTE
R
V
B
50
50
50
La videata scompare automaticamente dopo circa 30
secondi.
Per chiudere la videata, premere due volte il tasto MENU.
La videata OPZIONI scompare automaticamente dopo circa
30 secondi.
Per chiudere la videata, premere due volte il tasto MENU.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Personalizzazione del monitor
Regolazione della
retroilluminazione
Impostazione del ritardo della
funzione di risparmio energetico
Se durante l’uso del monitor in una stanza buia lo schermo è
troppo luminoso, regolare la retroilluminazione.
È possibile impostare il tempo per ritardare l’ingresso del
monitor nel modo di risparmio energetico. Per maggiori
informazioni sulle capacità di risparmio energetico di
questo monitor, vedere a pagina 17.
1 Premere il tasto MENU.
Appare la videata MENU.
MENU
MENU
OK
1 Premere il tasto MENU.
Appare la videata MENU.
MENU
USCITA
FASE
MENU
MENU
OK
REG. PIXEL
USCITA
FASE
MENU
CENTRATURA
ZOOM/SMOOTHING
COLORE
REG. PIXEL
CENTRATURA
ZOOM/SMOOTHING
COLORE
LANGUAGE
OPZIONI
LANGUAGE
OPZIONI
2 Premere i tasti ˘/≥ per selezionare OPZIONI e
premere di nuovo il tasto MENU.
Appare la videata OPZIONI.
2 Premere i tasti ˘/≥ per selezionare OPZIONI e
premere di nuovo il tasto MENU.
OPZIONI
Appare la videata OPZIONI.
MENU
OPZIONI
MENU
: 5SEC
: SBLOC
IT
: 5SEC
: SBLOC
POSIZ MENU ORIZ
POSIZ MENU ORIZ
3 Premere i tasti ˘/≥ per selezionare
(RETROILLUMINAZ).
ZZ...
3 Premere i tasti ˘/≥ per selezionare
(RITARDO
OPZIONI
POW SAV).
OPZIONI
26
: SBLOC
60MIN
1MIN
5SEC
NO
RETROILLUMINAZ.
RITARDO POW SAV
4 Premere i tasti +/– per regolare il livello della luce.
4 Premere i tasti +/– per selezionare il tempo
desiderato.
La videata OPZIONI scompare automaticamente dopo circa
30 secondi.
Per chiudere la videata, premere due volte il tasto MENU.
Se RITARDO POW SAV viene impostato su NO, il
monitor non entra nel modo di risparmio energetico.
La videata OPZIONI scompare automaticamente dopo circa
30 secondi.
Per chiudere la videata, premere due volte il tasto MENU.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Personalizzazione del monitor
Blocco dei comandi
Reimpostazione delle regolazioni
La funzione di blocco dei comandi disattiva tutti i comandi
eccetto l’interruttore u (accensione), il tasto MENU e altri
tasti sul pannello anteriore.
Tutte le regolazioni e le impostazioni possono essere
reimpostate sulle impostazioni di fabbrica.
La temperatura di colore viene reimpostata su 9300K,
l’impostazione di zoom viene reimpostata sul modo FULL 1
e il tempo di ritardo della funzione di risparmio energetico
viene reimpostato su 5 secondi. Il blocco dei comandi viene
annullato. Le altre regolazioni ritornano alle impostazioni
predefinite. Tuttavia, la lingua per la visualizzazione a
schermo non viene modificata.
Quando si seleziona “BLOCC”, nelle videata MENU è
possibile selezionare solo le seguenti voci:
• USCITA
• BLOCC MENU e IMPOSTAZ. ORIGIN nella videata
OPZIONI
Se si preme uno dei tasti bloccati, sullo schermo appare il
1 Premere il tasto MENU.
MENU
MENU
OK
contrassegno
.
Appare la videata MENU.
USCITA
FASE
1 Premere il tasto MENU.
MENU
REG. PIXEL
MENU
MENU
OK
Appare la videata MENU.
CENTRATURA
ZOOM/SMOOTHING
COLORE
LANGUAGE
OPZIONI
USCITA
FASE
MENU
REG. PIXEL
CENTRATURA
ZOOM/SMOOTHING
COLORE
2 Premere i tasti ˘/≥ per selezionare OPZIONI e
premere di nuovo il tasto MENU.
2 Premere i tasti ˘/≥ per selezionare OPZIONI e
premere di nuovo il tasto MENU.
Appare la videata OPZIONI.
Appare la videata OPZIONI.
OPZIONI
OPZIONI
MENU
MENU
: 5SEC
: SBLOC
: 5SEC
: SBLOC
POSIZ MENU ORIZ
3 Premere i tasti ˘/≥ per selezionare
(BLOCC
MENU).
OPZIONI
3 Premere i tasti ˘/≥ per selezionare ? (IMPOST.
ORIGINALI).
OPZIONI
SBLOC
BLOCC
:
5SEC
SI
BLOCC MENU
IMPOST. ORIGINALI
4 Premere il tasto – per selezionare BLOCC.
4 Premere il tasto +.
La videata OPZIONI scompare automaticamente dopo circa
30 secondi.
Per chiudere la videata, premere due volte il tasto MENU.
La videata OPZIONI scompare automaticamente dopo circa
30 secondi.
Per chiudere la videata, premere due volte il tasto MENU.
Per annullare il blocco dei comandi
Premere il tasto + al punto 4 per selezionare SBLOC.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
In fo rm a zio n i a g g iu n t ive
Consumo
energetico
Modo di consumo
energetico
Indicatore u
Modi preimpostati e modi utente
≤ 48 W
1
2
Funzionamento normale
Attesa (I modo)
Verde
Questo monitor dispone di modi preimpostati in fabbrica in
base agli standard industriali più diffusi di effettiva
compatibilità “plug and play”.
Per un elenco dei modi preimpostati in fabbrica, vedere
l’Appendix.
Quando viene immesso un nuovo segnale di ingresso, il
monitor seleziona il modo preimpostato in fabbrica
appropriato e regola temporaneamente la calibrazione della
fase per fornire un’immagine di alta qualità al centro dello
schermo. La calibrazione viene memorizzata e
immediatamente richiamata qualora venga ricevuto lo
stesso segnale di ingresso.
≤ 15 W
Verde e arancione
alternati
≤ 15 W
3
4
Sospeso (II modo)
(autospegnimento)*
Verde e arancione
alternati
≤ 1 W
Attivo-spento (III modo)**
(autospegnimento profondo)*
Arancione
≤ 1 W
5
6
Spento
Spento
Spento
0 W
Spegnimento principale
*
“Autospegnimento” e “Autospegnimento profondo” sono modi
di risparmio energetico definiti dall’ente per la tutela
dell’ambiente (Environmental Protection Agency).
Per i segnali di ingresso che non corrispondono a nessuno
dei modi preimpostati in fabbrica, la tecnologia Multiscan
digitale di questo monitor esegue tutte le regolazioni
necessarie affinché sullo schermo appaia un’immagine
nitida per qualsiasi sincronizzazione nella gamma di
frequenza del monitor. Tuttavia, potrebbe essere necessaria
la sintonia fine della centratura verticale e orizzontale.
Premere semplicemente il tasto AUTO o regolare il monitor
in base alle istruzioni di regolazione. Le regolazioni
vengono memorizzate automaticamente come modo utente
e richiamate qualora venga ricevuto il segnale di ingresso
corrispondente.
** Quando il computer entra nel modo di risparmio energetico, il
segnale di ingresso viene interrotto e sullo schermo appare il
messaggio “NO SEGNALE INGR”. Una volta superato il tempo
impostato seguendo la procedura descritta nella sezione
“Impostazione del ritardo della funzione di risparmio
energetico” (pagina 15), il monitor entra nel modo di risparmio
energetico.
Guida alla soluzione dei problemi
Questa sezione permette di individuare la causa di un
problema evitando di rivolgersi all’assistenza tecnica.
IT
Funzione di risparmio energetico
Messaggi a schermo
Questo monitor è conforme alle direttive di risparmio
energetico stabilite da VESA e ENERGY STAR, così come
alle più severe direttive NUTEK.
Se si verificano problemi con il segnale di ingresso, sullo
schermo appare uno dei seguenti messaggi. Per risolvere il
problema, vedere “Guida alla soluzione dei problemi “ a
pagina 18.
Se il monitor viene collegato ad un computer o ad una
scheda grafica video conforme a VESA DPMS (Display
Power Management Signaling), il consumo energetico verrà
automaticamente ridotto in tre fasi come descritto qui sotto.
È possibile impostare il tempo di ritardo per l’ingresso del
monitor nel modo di risparmio energetico utilizzando la
videata, come descritto nella sezione “Impostazione del
ritardo della funzione di risparmio energetico “ a pagina 15.
INFORMATION
FUORI GAMMA SCANS
“FUORI GAMMA SCANS” indica che il segnale di ingresso
non è supportato dalle specifiche di visualizzazione.
“NO SEGNALE INGR” indica che al monitor non arriva
alcun segnale.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
In fo rm a zio n i a g g iu n t ive
Guida alla soluzione dei problemi
Se il problema è causato dal computer o da un altro dispositivo collegato, consultare il relativo manuale delle istruzioni.
Usare la funzione di autodiagnostica (pagina 19) se i seguenti consigli non risolvono il problema.
Sin t o m o
Ve rifica re q u a n t o se g u e
Nessuna immagine
• Verificare che il cavo di alimentazione sia collegato correttamente.
Se l’indicatore u non è
• Verificare che l’interruttore u (accensione) sia sulla posizione di acceso.
illuminato
• Verificare che il cavo del segnale video sia collegato correttamente e che tutte le spine siano
saldamente inserite nelle rispettive prese.
Se sullo schermo appare il
messaggio “NO SEGNALE
INGR” o se l’indicatore u è
arancione o passa di continuo
dal verde all’arancione
• Verificare che l’impostazione di selezione di ingresso sia corretta.
• Verificare che i piedini del connettore di ingresso video HD15 non siano piegati o rientrati.
pProblemi causati dal computer o da un altro dispositivo collegato
• Il computer è nel modo di risparmio energetico. Provare a premere un tasto sulla tastiera
del computer.
• Verificare che il computer sia acceso.
• Verificare che la scheda grafica sia posizionata completamente nell’alloggiamento del bus
corretto.
pProblemi causati dal computer o da un altro dispositivo collegato
• Verificare che la gamma di frequenza si trovi sui valori specificati per il monitor. Se si è
sostituito un vecchio monitor con questo nuovo, ricollegare il vecchio e regolare la gamma
di frequenza come indicato di seguito.
Se sullo schermo appare il
messaggio “FUORI GAMMA
SCANS”
Orizzontale: 30 – 92 kHz, verticale: 48 – 85 Hz
• Usare la funzione di autodiagnostica (pagina 19).
Se non viene visualizzato alcun
messaggio e l’indicatore u è di
colore verde o di colore
arancione lampeggiante
• Se si è sostituito un vecchio monitor con questo nuovo, ricollegare il vecchio ed attenersi
alla procedura descritta di seguito. Installare il dischetto Windows Monitor Information
Disk/Utility Disk e selezionare “CPD-L181” tra i monitor Sony visualizzati nella relativa
schermata di selezione in Windows 95/98.
Se si usa Windows 95/98
• Verificare che l’adattatore Macintosh e il cavo del segnale video siano collegati
correttamente (pagina 6).
Se si usa un sistema Macintosh
• Premere il tasto AUTO. Se il problema non viene risolto, regolare pixel e fase (pagina 10).
• Individuare ed eliminare potenziali fonti di campi elettrici o magnetici come altri monitor,
stampanti laser, ventole elettriche, luci fluorescenti o televisioni.
L’immagine sfarfalla, salta,
oscilla o è confusa.
• Allontanare il monitor da linee di alimentazione oppure collocare uno schermo magnetico
accanto al monitor.
• Provare a collegare il monitor ad un’altra presa CA preferibilmente su un circuito diverso.
• Provare a girare il monitor di 90° a destra o a sinistra.
pProblemi causati dal computer o da un altro dispositivo collegato
• Verificare nel manuale della scheda grafica la corretta impostazione del monitor.
• Controllare il manuale per una conferma che il modo grafico (VESA, Macintosh 21” Color, e
così via) e la frequenza del segnale di ingresso siano supportati dal monitor (Appendix).
Anche se la frequenza è compresa nell’intervallo corretto, alcune schede grafiche possono
avere un impulso di sincronizzazione troppo stretto che non consente la sincronizzazione
corretta del monitor.
• Regolare la frequenza di refresh (frequenza verticale) per ottenere l’immagine migliore
possibile.
• Premere il tasto AUTO. Se il problema non viene risolto, regolare pixel e fase (pagina 10).
• Regolare il contrasto e la luminosità (pagina 12).
L’immagine è sfocata.
L’immagine è scura.
• Regolare la retroilluminazione (pagina 15).
• Regolare la luminosità (pagina 12).
• Una volta acceso, occorrono alcuni secondi prima che il monitor si riscaldi. L’immagine
apparirà in un attimo.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
In fo rm a zio n i a g g iu n t ive
Sin t o m o
Ve rifica re q u a n t o se g u e
L’immgine appare sdoppiata.
• Eliminare l’uso di prolunghe per il cavo video e/o cassette per l’interruttore video.
• Verificare che tutte le spine siano collocate saldamente nelle rispettive prese.
L’immagine non è centrata o
ridimensionata correttamente.
• Premere il tasto AUTO (pagina 10).
• Regolare le dimensioni (pagina 12) o la centratura (pagina 11). Notare che alcuni modi video
non riempiono lo schermo fino ai bordi.
Appaiono disturbi ondeggianti
o ellittici (moiré).
• Regolare pixel e fase (pagina 10).
Il colore non è uniforme.
• Premere il tasto AUTO. Se il problema non viene risolto, regolare pixel e fase (pagina 10).
• Regolare la temperatura di colore (pagina 14).
Il bianco non appare bianco.
I controlli del monitor non
funzionano.
• Se il blocco dei comandi è impostato su BLOCC, impostarlo su SBLOCC (pagina 16).
Se l’in d ica t o re d i a cce n sio n e u la m p e g g ia
in a ra n cio n e
Funzione di autodiagnostica
Questo monitor dispone di una funzione di autodiagnostica.
Se si presentano problemi al monitor o ai computer
collegati, lo schermo si oscurerà e l’indicatore di accensione
u si illuminerà in verde o lampeggerà in arancione. Se
l’indicatore di accensione u è illuminato in arancione, il
computer è nel modo di risparmio energetico. Provare a
premere un tasto qualsiasi sulla tastiera.
Premere il tasto di accensione u per spegnere e
riaccendere il monitor.
Se l’indicatore di accensione u si illumina in verde, il
monitor funziona in modo corretto.
Se l’indicatore di accensione u continua a lampeggiare, si
tratta di un potenziale guasto al monitor. Contare il numero
di secondi tra il lampeggiamento nel colore arancione
dell’indicatore di accensione u e rivolgersi al rivenditore
autorizzato Sony. Annotare il nome del modello e il numero
di serie del monitor. Inoltre, annotare la marca e il modello
del proprio computer e della scheda grafica.
IT
Indicatore di
accensione u
Visu a lizza zio n e d e lla vid e a t a
INFORMATION
Se l’in d ica t o re d i a cce n sio n e u è ve rd e
È possibile confermare il nome, il numero di serie e l’anno
di fabbricazione di questo monitor.
1 Scollegare il cavo o i cavi del segnale video.
2 Prima che il monitor passi al modo di risparmio
energetico, premere il tasto + e tenerlo premuto per
2 secondi.
Premere e tenere premuto il tasto MENU per cinque
secondi.
Appare la videata INFORMATION.
Esempio
INFORMATION
Nome del modello
MODEL : CPD-L181
Numero di serie
Se appaiono tutte le quattro barre a colori (bianco, rosso,
verde, blu), il monitor funziona in modo corretto.
Ricollegare i cavi di ingresso video e controllare le
condizioni dei computer.
SER NO : 1234567
MANUFACTURED : 1999-52
Settimana e anno di
fabbricazione
Se le barre a colori non appaiono, si tratta di un potenziale
guasto al monitor. Rivolgersi al rivenditore autorizzato
Sony.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
In fo rm a zio n i a g g iu n t ive
Assegnazione dei piedini …1/…2
Caratteristiche tecniche
1
5 4 3 2
10 9 8
Pannello LCD
Tipo di pannello: matrice attiva
7
6
a-Si TFT
15 14 13 12 11
Dimensione immagine: 18,1 pollici
(46 cm)
Formato segnale di ingresso
frequenza di funzionamento RGB*
N. piedino Segnale
N. piedino Segnale
1
2
Rosso
8
Terra blu
DDC + 5V*
Terra
Verde
9
fr. or.: 30 – 92 kHz
fr. ver.: 48 – 85 Hz
99,99 %
O: 1280 punti max
V: 1024 linee max
CA da 100 a 240 V, 50 – 60 Hz,
1,0 – 0,6 A
(sincronizzazione
composita su verde)
10
11
12
Efficienza pixel
Risoluzione
ID (terra)
3
4
5
6
7
Blu
Dati bidirezionali
(SDA)*
ID (terra)
Terra DDC*
Terra rosso
Terra verde
Alimentazione
13
14
15
Sinc orizzontale
Sinc verticale
Alimentazione
Dimensioni (l/a/p)
48 W max
Incluso il supporto:
Circa 468 × 422 × 207,5 mm
Solo monitor:
Orologio dati (SCL)*
*
Standard Display Data Channel (DDC) di VESA
Circa 468 × 354,5 × 90 mm
Circa 9 kg incluso il supporto
DDC/DDC2B/DDC2Bi
Peso
Plug & Play
Accessori in dotazione
Vedere pagina 6.
* Co n d izio n i d i sin cro n izza zio n e o rizzo n t a le e
ve rt ica le co n sig lia t e
Il fattore dell’ampiezza di sincronizzazione orizzontale deve essere
superiore al 4,8% del tempo totale orizzontale oppure 0,8 µsec., a
seconda di quale è più ampio.
L’ampiezza di cancellazione orizzontale deve essere superiore a
2,5 µsec.
L’ampiezza di cancellazione verticale deve essere superiore a
450 µsec.
Il design e le caratteristiche tecniche sono soggetti a
modifiche senza preavviso.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Ap p e n d ix
Preset Mode Timing Table
TCO’99 Eco-document
Resolution Horizontal Vertical
No. (dots × lines) Frequency FrequencyGraphics Mode
1
640 × 480
31.5 kHz
60 Hz
VGA-G
640 × 480
35.0 kHz
67 Hz
Macintosh
13” color
2
3
640 × 480
640 × 480
720 × 400
720 × 400
800 × 600
800 × 600
800 × 600
832 × 624
37.5 kHz
43.3 kHz
31.5 kHz
37.9 kHz
37.9 kHz
46.9 kHz
53.7 kHz
49.7 kHz
75 Hz
85 Hz
70 Hz
85 Hz
60 Hz
75 Hz
85 Hz
75 Hz
EVGA
VESA
4
VGA-Text
VESA
5
6
SVGA
7
8
ESVGA
VESA
Co n g ra t u la t io n s!
9
You have just purchased a TCO’99 approved and labelled
product! Your choice has provided you with a product
developed for professional use. Your purchase has also
contributed to reducing the burden on the environment and
also to the further development of environmentally adapted
electronics products.
Macintosh
16” color
10
1024 × 768
1024 × 768
1024 × 768
1024 × 768
48.4 kHz
56.5 kHz
60.0 kHz
60.2 kHz
60 Hz
70 Hz
75 Hz
75 Hz
VESA
11
12
13
14
VESA
EUVGA
Wh y d o w e h a ve e n viro n m e n t a lly
la b e lle d co m p u t e rs?
Macintosh
19” Color
In many countries, environmental labelling has become an
established method for encouraging the adaptation of goods
and services to the environment. The main problem, as far
as computers and other electronics equipment are
concerned, is that environmentally harmful substances are
used both in the products and during their manufacture.
Since it is not so far possible to satisfactorily recycle the
majority of electronics equipment, most of these potentially
damaging substances sooner or later enter nature.
15
16
17
1024 × 768
1152 × 864
1152 × 870
68.7 kHz
67.5 kHz
68.7 kHz
85 Hz
75 Hz
75 Hz
VESA
VESA
Macintosh
Double-page
1280 × 960
1280 × 960
1280 × 1024
1280 × 1024
1280 × 1024
60.0 kHz
85.9 kHz
64.0 kHz
80.0 kHz
91.2 kHz
60 Hz
85 Hz
60 Hz
75 Hz
85 Hz
VESA
VESA
VESA
VESA
VESA
18
19
20
21
22
There are also other characteristics of a computer, such as
energy consumption levels, that are important from the
viewpoints of both the work (internal) and natural (external)
environments. Since all methods of electricity generation
have a negative effect on the environment (e.g. acidic and
climate-influencing emissions, radioactive waste), it is vital
to save energy. Electronics equipment in offices is often left
running continuously and thereby consumes a lot of energy.
(continued)
i
Download from Www.Somanuals.com. All Manuals Search And Download.
Ap p e n d ix
Wh a t d o e s la b e llin g in vo lve ?
En viro n m e n t a l re q u ire m e n t s
This product meets the requirements for the TCO’99 scheme
which provides for international and environmental
labelling of personal computers. The labelling scheme was
developed as a joint effort by the TCO (The Swedish
Confederation of Professional Employees), Svenska
Naturskyddsforeningen (The Swedish Society for Nature
Conservation) and Statens Energimyndighet (The Swedish
National Energy Administration).
Flame retardants
Flame retardants are present in printed circuit boards,
cables, wires, casings and housings. Their purpose is to
prevent, or at least to delay the spread of fire. Up to 30% of
the plastic in a computer casing can consist of flame
retardant substances. Most flame retardants contain
bromine or chloride, and those flame retardants are
chemically related to another group of environmental
toxins, PCBs. Both the flame retardants containing bromine
or chloride and the PCBs are suspected of giving rise to
severe health effects, including reproductive damage in fish-
eating birds and mammals, due to the bio-accumulative*
processes. Flame retardants have been found in human
blood and researchers fear that disturbances in foetus
development may occur.
Approval requirements cover a wide range of issues:
environment, ergonomics, usability, emission of electric and
magnetic fields, energy consumption and electrical and fire
safety.
The environmental demands impose restrictions on the
presence and use of heavy metals, brominated and
chlorinated flame retardants, CFCs (freons) and chlorinated
solvents, among other things. The product must be
prepared for recycling and the manufacturer is obliged to
have an environmental policy which must be adhered to in
each country where the company implements its
operational policy.
The relevant TCO’99 demand requires that plastic
components weighing more than 25 grams must not contain
flame retardants with organically bound bromine or
chlorine. Flame retardants are allowed in the printed circuit
boards since no substitutes are available.
Cadmium**
The energy requirements include a demand that the
computer and/or display, after a certain period of
inactivity, shall reduce its power consumption to a lower
level in one or more stages. The length of time to reactivate
the computer shall be reasonable for the user.
Cadmium is present in rechargeable batteries and in the
colour-generating layers of certain computer displays.
Cadmium damages the nervous system and is toxic in high
doses. The relevant TCO’99 requirement states that
batteries, the colour-generating layers of display screens and
the electrical or electronics components must not contain
any cadmium.
Labelled products must meet strict environmental demands,
for example, in respect of the reduction of electric and
magnetic fields, physical and visual ergonomics and good
usability.
Mercury**
Mercury is sometimes found in batteries, relays and
switches. It damages the nervous system and is toxic in high
doses. The relevant TCO’99 requirement states that batteries
may not contain any mercury. It also demands that mercury
is not present in any of the electrical or electronics
components associated with the labelled unit.
Below you will find a brief summary of the environmental
requirements met by this product. The complete
environmental criteria document may be ordered from:
TCO Development
SE-114 94 Stockholm, Sweden
Fax: +46 8 782 92 07
CFCs (freons)
Email (Internet): [email protected]
Current information regarding TCO’99 approved
and labelled products may also be obtained via the
Internet, using the address:
The relevant TCO’99 requirement states that neither CFCs
nor HCFCs may be used during the manufacture and
assembly of the product. CFCs (freons) are sometimes used
for washing printed circuit boards. CFCs break down ozone
and thereby damage the ozone layer in the stratosphere,
causing increased reception on earth of ultraviolet light with
e.g. increased risks of skin cancer (malignant melanoma) as
a consequence.
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Ap p e n d ix
Lead**
Lead can be found in picture tubes, display screens, solders
and capacitors. Lead damages the nervous system and in
higher doses, causes lead poisoning. The relevant TCO’99
requirement permits the inclusion of lead since no
replacement has yet been developed.
*
Bio-accumulative is defined as substances which accumulate
within living organisms.
** Lead, Cadmium and Mercury are heavy metals which are Bio-
accumulative.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Sony Corporation Printed in Japan
Download from Www.Somanuals.com. All Manuals Search And Download.
|