Sony Computer Accessories VGF CP1 User Manual

Digital Photo Frame  
VGF-CP1  
Operating Instructions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For Customer in Europe  
Disposal of Old Electrical &  
Electronic Equipment  
(Applicable in the  
European Union and other  
European countries with  
separate collection  
systems)  
Sony hereby declares that this equipment is in compliance  
with the essential requirements and other relevant  
provisions of European Directive 1999/5/EC.  
To obtain a copy of the declaration of conformity (DoC)  
with the R&TTE Directive, please access the following  
URL address.  
http://www.compliance.sony.de/  
This product also complies with EN 55022 Class B and  
EN 55024, for use in following areas: residential,  
commercial and light industrial.  
This product can only be used in United Kingdom.  
Disposal of waste batteries  
(applicable in the European  
Union and other European  
countries with separate  
collection systems)  
Audio and picture distortion may occur if this  
equipment is positioned in close proximity to any  
equipment emitting electromagnetic radiation.  
This product has been tested and found to compliant  
with the limits set out in the EMC Directive for using  
connection cables not longer than ꢀ metres (9.8  
fDeiestp)o. se of the battery properly at its end-of-life.  
This symbol on the battery or on the packaging indicates  
that the battery provided with this product shall not be  
treated as household waste.  
In some areas the disposal of non-hazardous  
batteries in household or business waste may be  
pPlreoahsiebiutesed.the public collection system.  
By ensuring these batteries are disposed of correctly, you  
will help prevent potentially negative consequences for  
the environment and human health which could  
otherwise be caused by inappropriate waste handling of  
the battery. The recycling of the materials will help to  
conserve natural resources.  
In case of products that for safety, performance or data  
integrity reasons require a permanent connection with an  
incorporated battery, this battery should be replaced by  
qualified service staff only.  
To ensure that the battery will be treated properly, hand  
over the product at end-of-life to the applicable collection  
point for the recycling of electrical and electronic  
equipment.  
For all other batteries, please view the section on how to  
remove the battery from the product safely.  
Hand the battery over to the applicable collection point  
for the recycling of waste batteries.  
For more detailed information about recycling of this  
product or battery, please contact your local Civic Office,  
your household waste disposal service or the shop where  
you purchased the product.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For Customer in U.S.A.  
For the State of California, USA only  
Perchlorate Material - special handling may apply, See  
www.dtsc.ca.gov/hazardouswaste/perchlorate  
This equipment has been tested and found to comply  
with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC Rules. These limits are designed to  
provide reasonable protection against harmful  
Perchlorate Material: Lithium battery contains perchlorate.  
interference in a residential installation. This equipment  
generates, uses, and can radiate radio frequency energy  
and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that  
interference will not occur in a particular installation. If  
this equipment does cause harmful interference to radio  
or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged  
to try to correct the interference by one or more of the  
following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and  
receiver.  
Connect the equipment into an outlet on a circuit  
different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV  
technician for help.  
You are cautioned that any changes or modifications not  
expressly approved in this manual could void your  
authority to operate this equipment.  
All cables used to connect peripherals must be shielded  
and grounded. Operation with cables connected to  
peripherals that are not shielded and grounded may result  
in interference to radio and television reception.  
This device complies with Part 15 of the FCC Rules.  
Operation is subject to the following two conditions: (1)  
this device may not cause harmful interference, and (2)  
this device must accept any interference received,  
including interference that may cause undesired  
operation.  
This equipment complies with FCC radiation exposure  
limits set forth for an uncontrolled environment. This  
equipment should be installed and operated with  
minimum distance 8 inches (20 cm) between the radiator  
and your body (excluding extremities: hands, wrists, feet  
and ankles).  
This device and its antenna(s) must not be co-located or  
operating with any other antenna or transmitter except  
Grant condition.  
Caution  
The socket-outlet shall be installed near the  
eDqaunigpemr eonf teaxpnldosshioanllibf ebaetatseirlyy aiscicnecsosribrelec.tly replaced.  
Replace only with the same or equivalent type  
recommended by the manufacturer. Discard used  
batteries according to the manufacturer’s  
instructions.  
The battery used in this device may present a fire or  
chemical burn hazard if mistreated. Do not  
disassemble, heat above 1ꢁ0°F (60°C) or incinerate.  
Dispose of used battery promptly. Keep away from  
children. Do not short circuit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
About This Unit  
This unit is a Digital Photo Frame for displaying photos with Internet access.  
In addition to displaying photos, you can also enjoy music and information by creating various frames (page  
23).  
Note  
For home wireless network connection, you will need a subscription to an Internet service provider and a wireless LAN  
router.  
Picasa Web Albums, etc.  
Home server  
Memory Stick media, etc.  
Home server  
Registered RSS information, etc.  
You can display the following:  
Photos stored on memory cards such as Memory Sticks.  
Photos stored on your computer or home server through your wireless home network.  
Photos stored on a Web photo organizer or a home server supporting the Remote Home Access  
function. In order to use these functions, some network and server settings need to be configured.  
A slide show of your favorite photos, with photo effects and music.  
Photos stored on your home server supporting the Remote Home Access function - even if you are away  
from home.  
Note  
This unit cannot display movies shot by a digital camera or video camera.  
You can play back music files*:  
Stored on memory cards such as Memory Sticks.  
Stored on your computer through your wireless home network.  
Various Web radio programs broadcasted by SHOUTcast (page 44).  
*
MP3 or WAV (LPCM) can be played in this unit.  
Note  
This unit cannot play back music files with copyright protection.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
You can display the following information:  
News from Google News UK (U.K. model) or Google News (U.S.A model).  
The latest information from Web sites broadcasting RSS. You can register to receive RSS feeds in the Web  
browser (Opera) screen (page 47).  
Other uses  
If you give this unit to distant family or friends as a gift, you can send your photos to them through the Web service.  
First, configure the network and server settings with this unit, and save the Web photo organizer in frames, then you can  
view the latest photos uploaded to the Web service by switching frames with the remote control.  
Illustrations and screen images in this manual may differ from the actual product.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Locating Controls and Ports  
Front  
WLAN (wireless LAN) indicator  
Lights up when the wireless LAN turns on.  
New Info indicator  
Blinks when receiving new information. Also  
can be turned on as a light.  
STANDBY indicator  
Lights up in standby mode.  
Remote control sensor  
Receives a signal from the remote control.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Back  
/ENTER button  
Press to select options and enter.  
Light sensor  
Detects ambient light around the unit.  
  
While the browse screen or a screen other  
than the Options screen is displayed, adjust  
Hint  
If you set [ System settings] - [Auto power on/  
off] to [On] in the setting screen of this unit, the  
power will automatically turn on or enter the  
standby mode according to the surrounding  
ambient brightness (page 62).  
the volume by pressing  
.
  
BACK button  
Press to quit setting and return to the  
previous screen.  
OPTIONS button  
Press to display the setting screen of the  
Note  
Keep sharp objects away from the sensor.  
current feature.  
WLAN ON/OFF switch  
Press to switch ON/OFF the wireless LAN.  
HOME button  
Press to return to the Home screen.  
(USB) connector  
Connects a digital still camera or USB  
memory device.  
(POWER) button  
Press to turn on the power when in power  
off or standby mode.  
Note  
Press to enter standby mode while power is  
turned on.  
A USB hub should not be connected.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Bottom  
CF (CompactFlash) slot  
Accesses CompactFlash data.  
SD memory card slot  
Accesses SD/SDHC memory card data.  
Media access indicator  
Lights up in orange when accessing memory  
card data.  
  6V DC IN port  
Connects to the AC adapter, which in turn  
connects to a power outlet.  
Memory Stick slot  
Speakers  
Accesses Memory Stick, Memory Stick PRO,  
Memory Stick Duo or Memory Stick PRO Duo  
media data.  
Outputs sound when playing back music.  
There is another speaker on the opposite  
side.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Remote Control  
(POWER) button  
Press to turn on the power when in power  
off or standby mode.  
Press to enter standby mode during power  
on.  
VOLUME +/– buttons  
Press to adjust the volume.  
MUSIC/button  
Press to start / stop music playback.  
(ENTER) button  
Press to enter your selection.  
buttons  
  
Press to select options in the setting screen.  
OPTIONS button  
Press to display the setting screen of the  
current feature.  
DISPLAY button  
Press to display the guide.  
BACK button  
Press to quit setting and return to the  
previous screen.  
FRAME +/– buttons  
Press to switch frames.  
HOME button  
Press to return to the Home screen.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Before Use  
Checking Accessories  
After unpacking, make sure the following accessories are supplied with your unit. If you find something  
missing or broken, contact a local dealer in your area.  
Digital Photo Frame  
AC adapter  
Stand  
Installation CD (U.K. model only)  
Operating Instructions (this book)  
VGF-CP1 Quick Reference Guide  
Power cord  
Remote control  
Connecting  
Attach the stand to the unit and connect the AC adapter.  
1
Attach the threaded portion of the stand to the threaded hole at the bottom  
left corner of the back of the unit.  
2
Connect the AC adapter plug to the unit.  
AC adapter  
A ferrite core is supplied with  
the U.K. model only.  
1ꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3
Connect the power cord to the AC adapter, then connect the power cord plug  
to a wall outlet.  
To wall outlet  
The power turns on and the start-up screen appears.  
Setting up the remote control  
1
Remove the insulation sheet from the remote control.  
Replacing the battery  
1
Open the battery tray.  
2
Replace with a new CRꢀ0ꢀꢂ lithium battery, + side up, then reinsert the  
battery tray.  
Lithium battery  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Inserting and Removing Memory Cards  
You can play back photos or music stored on Memory Stick, Memory Stick PRO, Memory Stick Duo or  
Memory Stick PRO Duo media, or an SD/SDHC memory card, CompactFlash card or digital still camera with  
USB connection or USB memory device.  
Inserting and removing memory cards  
Insert memory cards as illustrated below.  
CompactFlash card  
Memory Stick media  
SD/SDHC memory card  
When removing Memory Stick, Memory Stick PRO, Memory Stick Duo or Memory Stick PRO Duo media, or  
an SD/SDHC memory card, make sure the media access indicator is not lit. Push fully in once and pull out.  
When removing a CompactFlash card, make sure the media access indicator is not lit.  
Attaching and detaching a USB cable or USB memory device  
Insert the connector of a USB cable connected to a digital still camera or USB memory device into the   
(USB) connector of this unit. Unplug the connector when not in use.  
Hint  
This unit is to USB mass-storage class compatible.  
1ꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
About compatible memory cards  
You can use Memory Stick media, SD memory cards and CompactFlash cards with this unit.  
For details on memory card restrictions, see below.  
Memory Stick media  
You can use the following Memory Stick media with this unit.  
Memory Stick / Memory Stick Duo / Memory Stick PRO / Memory Stick PRO Duo  
This unit has a slot for both standard / Duo-size types.  
You can insert Memory Stick Duo or Memory Stick PRO Duo media directly into the Memory Sick slot without an  
adapter.  
Do not insert Memory Stick and Memory Stick Duo media at the same time. Improper insertion of media may  
damage both Memory Stick slot and media.  
This unit does not support the MagicGate feature; data with copyright protection cannot be accessed.  
This unit does not support 8-bit parallel data transfer (high speed data transfer).  
This unit has been tested and found compatible with Sony branded Memory Stick media of up to 8 GB capacity;  
available as of May 2008. However, not all Memory Stick media that meet these specifications are guaranteed to  
work.  
SD memory card  
This unit has been tested and found compatible only with SD memory cards of a capacity up to 2 GB, and SDHC  
memory cards of a capacity up to 8 GB, available as of May 2008. However, not all SD memory cards or SDHC  
memory cards that meet these specifications are guaranteed to work.  
The SD memory card slot on this unit does not support the copyright protection and high-speed data transfer  
features of SD memory cards and SDHC memory cards.  
CompactFlash card  
You can use CompactFlash cards of Type I and Type II with capacity of up to 8 GB commercially available from May  
2008. However, not all CompactFlash cards that meet specifications are guaranteed to work.  
1ꢂ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Basic Operation  
Basic Use  
Turning the Power On  
For the customers purchasing the U.K. model  
After connecting the power cord for the first time, the screen detailing the required user registration  
appears. Please fill out the required contents and proceed to the following procedure.  
1
Make sure the stand, power and remote control are ready for use by following  
the steps in “Connecting(page 1ꢀ).  
This unit turns on after connecting the power cord.  
Hint  
Press (POWER) to turn the power on when in standby mode.  
To set to standby mode  
Standby Modereduces power consumption by deactivating the screen.  
If you set [ System settings] - [Auto power on/off] to [On] in the setting screen of this unit, the power  
will automatically turn on or enter standby mode according to a surrounding ambient brightness (page  
62).  
1
Press (POWER) on the remote control pointing at the remote control sensor  
of this unit.  
The STANDBY indicator lights up in orange and turns to standby mode.  
Hint  
This unit can also be set to standby mode by pressing (POWER) on the back of this unit.  
To turn off the power  
The steps below show how to turn off the power to remove the AC adapter, etc.  
1
Press (POWER) on the back of this unit.  
The STANDBY indicator lights up in orange and standby mode is set.  
2
Press and hold (POWER) on the back of this unit.  
The New Info indicator blinks and turns off when the power turns off.  
Note  
You cannot turn off the power by the remote control.  
Press and hold (POWER) only when in standby mode. If you turn the power off from a mode other than standby  
mode, stored data may be lost.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
About the Home Screen  
Turning on the power opens the Home screen. All functions can be selected from the Home screen.  
Press .  
Select a frame by  
pressing and  
Select desired item  
by pressing and  
press  
(ENTER).  
press  
(ENTER).  
Frame playback starts.  
The browse screen or  
setting screen appears.  
Frame list  
Displays registered frames. If Shared frames  
are created (page 29),  
new photos are uploaded.  
Information  
Starts the registered RSS or news provided  
from Google News U.K. (for U.K. model)/  
Google News (for U.S.A. model) can be  
displayed. Creating a new frame, etc., can be  
performed from the Options menu (page  
58).  
appears when  
Photos  
Displays photo files stored in the memory or  
on the server. Playing a slide show, creating  
new frames, etc., can be performed from the  
Options menu (page 57).  
Settings  
Configures various settings of this unit (page  
60).  
appears when update information for  
Music  
software is available. The information can be  
checked by selecting [Important messages]  
of [ System settings] in [ Settings] (page  
60).  
Plays back music stored in the memory or on  
the server, or radio programs from  
SHOUTcast. Additionally, creating a new  
frame, etc., can be performed from the  
Options menu (page 58).  
Note  
The web browser equipped with this unit is for mainly checking news or registered RSS information, etc. Some web sites or  
flash contents may not be properly displayed or played.  
Hint  
While displaying photos or playing music, you can press HOME to return to the Home screen.  
The HOME button does not work while the selection screen (for [Yes], [No] or [Close]) is displayed. Complete selection/  
confirmation, and then press HOME.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Playing Back Photos Frame of Sample Images  
Frames using sample images and music pre-stored on this unit are used to demonstrate what a frame is. For  
details on creating or playing back a frame, see page 23, 26.  
Playing back a frame of sample images and music from the Home screen  
1
Press HOME on the remote control.  
The Home screen appears.  
2
Select a frame by pressing  
The selected frame starts playing back.  
on the remote control, and press  
(ENTER).  
  
Displaying Data on the Browse Screen  
You can play back photos or music stored in the memory or the server, or display Internet RSS information  
on the browse screen.You can also create a new frame from the browse screen (page 23).  
Hint  
In addition to the photo browse screen explained in this section, the music browse screen to play back music files, or the  
information browse screen to display RSS information, are also available.  
Displaying photos on Memory Stick media  
As an example, the following steps show how to display photos on Memory Stick media shot by a digital  
still camera.  
1
Turn the power on (page 16).  
The Home screen appears.  
Hint  
If the Home screen does not appear, press HOME on the remote control.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2
3
Insert Memory Stick media into this unit (page 1ꢁ).  
Folders or photos on Memory Stick media appear after about 5 seconds.  
Hint  
If folders of photos do not appear, do the following:  
In the Home screen, press on the remote control. Select [ Photos] by pressing  
, and press  
  
(ENTER).  
Select [ Memory Stick] by pressing  
, and press  
(ENTER).  
  
Select a folder including a target photo by pressing  
on the remote control,  
  
and press  
(ENTER).  
The photo list appears.  
Hint  
The selected folder may contain subfolders. In this case, repeat step 3 until a target photo appears.  
IfCannot show the server list.appears, the folder does not contain any files in a format that can be played by this  
unit. Press  
(ENTER) to return to the previous screen.  
Photos in Web services, on other memory cards, or on computers on a home LAN can be displayed in the same  
way. In the case of a Web service, or a computer on a home LAN, you should configure the connection settings  
(page 32, 51).  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Select a photo by pressing  
, and press  
(ENTER).  
  
A photo is displayed.  
Hint  
If you insert a memory card while a screen other than the browse, Settings or Options screen is displayed, the photo  
(folder) list of the memory card appears.  
Copying Data to the Internal Memory  
You can copy photos or music stored in memory devices or in server to the internal memory of this unit.  
Hint  
Approximately 85 MB of the internal memory can be spared for copying and registering photos. Up to approximately  
120 photos can be registered. (The number of photos that can be registered varies according to their types.)  
Approximately 15 MB of the internal memory can be spared for copying and registering music.  
The internal memory stores some sample images and sample music. The capacity allocation will increase by deleting  
them. The deleted sample images and music can be restored by [ Initialization] in [ Settings] (page 60).  
Note  
The registered photos and music in the internal memory cannot be moved or copied to the external memory.  
Multiple files or folders cannot be copied at the same time.  
WAV file format music cannot be copied to the internal memory.  
Copying a photo to the internal memory  
1
Display the photos or the folders including photos you are going to copy to  
the internal memory by following the steps in “Displaying Data on the Browse  
Screen(page 18).  
When you want to copy a photo, display the photo. When you want to copy a whole folder, display  
the folder. Note that only the photos directly under the folder will be copied and the photos in the sub  
folder will not be copied.  
ꢀ0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Hint  
To copy music to the internal memory, follow the steps inPlaying Back Music in Memory Stick Media(page 43) to  
play back music you want to copy to the internal memory. A whole folder including music cannot be copied.  
2
3
Press OPTIONS on the remote control.  
The options menu appears.  
Select [Copy to internal memory] by pressing  
on the remote control, and  
  
press  
(ENTER).  
A confirmation screen appears.  
4
5
Select [Yes] by pressing  
on the remote control, and press  
(ENTER).  
  
Press  
(ENTER) on the remote control.  
Playing back a photo copied to the internal memory  
1
Press HOME on the remote control.  
The Home screen appears.  
ꢀ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
3
4
Press on the remote control and select [ Photos] by pressing  
, and press  
  
(ENTER).  
Select [Internal memory] by pressing  
(ENTER).  
on the remote control, and press  
  
Select a photo by pressing  
on the remote control, and press  
(ENTER).  
  
The selected photo is displayed.  
Note  
Slide show playback cannot be performed with multiple photos optionally selected in the internal memory.  
If the aspect ratio of the copied photo differs from the one of the display of this unit, a blank space is displayed at top  
and bottom or left and right.  
When you operate to copy a whole folder to the internal memory, only data inside the folder is copied. The folder  
composition therefore will not be displayed in the internal memory.  
ꢀꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Deleting a photo in the internal memory  
Photos and music in the internal memory can be deleted in [Delete photos] or [Delete all in the folder] in  
the option menu (page 58).  
Creating a Frame  
A frame is a collection of your favorite photos or music that can be easily selected.  
Once you have created several frames, you can easily change photos or music to match your mood by  
selecting one of the frames in the Home screen.  
Hint  
In addition to the Photos and Info frame explained in this section, you can also save Music frames to play back music files  
and Memories frames to display photos in order of shooting date and time. For details on other frames, seeAvailable  
Frames(page 27).  
Creating a Photos and Info frame  
As an example, the following steps show how to create aPhotos and Infoframe to display photos in a  
folder.  
1
Display photos in a folder to create a Photos and Info frame by following the  
steps in “Displaying Data on the Browse Screen(page 18).  
2
Press OPTIONS on the remote control.  
The Options menu appears.  
3
Select [Create new frame] by pressing  
(ENTER).  
on the remote control, and press  
  
A confirmation screen for creating a frame appears.  
Hint  
All photos in the folder storing target photo are saved in the frame.  
ꢀ3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4
5
Select [Yes] by pressing  
on the remote control, and press  
(ENTER).  
  
TheCreate new framescreen appears.  
Select [Photos and Info] by pressing  
(ENTER).  
on the remote control, and press  
  
TheCreate Photos and info framescreen appears.  
Hint  
In addition to the Photos and Info frame, you can select a Photo frame (page 28), a Shared frame (page 29) or a  
Memories frame (page 29). However, the Shared frame can be selected only when displaying photos in the Web  
server on the Internet in step 1.  
6
Press on the remote control.  
A setting screen to display information appears.  
Hint  
You can set the style, order and interval for displaying photos in the Photos and Info frame. To change the settings,  
select the desired setting by pressing on the remote control and press (ENTER), then select the desired option  
  
(ENTER).  
by pressing  
and press  
  
ꢀꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
Press on the remote control.  
A confirmation screen for the selected settings appears.  
Hint  
The selection to display news information provided from Google News U.K. (for U.K. model)/Google News (for U.S.A.  
model) or a registered RSS item in the Photos and Info frame can be set in this screen. Press on the remote  
  
(ENTER), then select the desired option by pressing  
control to select other settings (if desired) and press  
press (ENTER).  
and  
  
Note  
To display News, set up a wireless network before connecting the unit to the Internet. For details, seeConnecting to  
a Wireless Network(page 51).  
8
Select [Yes] by pressing  
on the remote control, and press  
(ENTER).  
  
The Photo and Info frame created with the selected settings appears.  
ꢀꢂ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing Back a Frame  
You can play back saved frames from the Home screen, or change frames to another frame by pressing  
FRAME on the remote control.  
Hint  
You can change the thumbnail displayed in the HOME screen to a desired photo in the frame. During  
playback of a frame, press OPTIONS during playback of the photo to be used for the thumbnail to select  
[Capture frame screen], and press  
(ENTER).  
Playing back a frame from the Home screen  
1
Press HOME on the remote control.  
The Home screen appears.  
2
Select the desired frame by pressing  
on the remote control, and press  
  
(ENTER).  
The selected frame starts playing back.  
Hint  
You can play back the frame by pressing FRAME while displaying a screen other than a frame.  
The operation guide for frames can be displayed by pressing DISPLAY repeatedly.  
Changing a frame  
You can change a frame to another frame during playback.  
1
Press FRAME on the remote control.  
Press FRAME + to change to the next frame up in the frame list in the Home screen. Press FRAME – to  
change to the next frame down in the frame list.  
Hint  
You can re-arrange the frame order or delete unnecessary frames in the Home screen (page 59).  
ꢀ6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Available Frames  
You can choose from 8 frame types, and save up to 20 frames.  
About the icons in this section  
: Data in the internal memory can be used.  
: Data on memory cards can be used.  
: Data in the Web service can be used (Internet connection necessary).  
: Data sent from the home server supported by the Remote Home Access function can be used (Internet connection  
necessary).  
: Data sent from a server using software such asVAIO Mediacan be used (Home LAN connection necessary).  
: Information such as news on the Internet can be displayed (Internet connection necessary).  
Frame Created from Photo Browse Screen  
From the photo browse screen, you can create 4 types of frames for decorating photos in various ways. To  
create a frame, select the desired photo file or folder from the photo browse screen, and select [Create new  
frame] in the Options menu (page 57).  
Hint  
If a folder is selected from the list when creating a frame, all photos in the folder currently selected up to the 4th level  
folder will be displayed in the frame.  
If you have created a frame in the window displaying a photo, only photos in the folder where the photo is stored will  
be displayed in the frame (photos in the sub folder will not be displayed).  
If you select a photo from the server usingVAIO Mediasoftware or in home access when creating a frame, only photos  
in the folder where the photo is stored will be displayed in the frame (photos in the sub folder will not be displayed).  
ꢀ7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Photos and Info frame  
/
/
/
/
/
Displays a photo or photos in a specified folder one after another.  
You can also display the current time or registered RSS information with the photos.  
Hint  
Each time you press DISPLAY, the display changes as follows:  
“Photo with analog clock“Photo with digital clock“Photo only“Photo with guide“Photo with analog  
clock…  
For details on clock setting, see page 61.  
Photos frame  
/
/
/
/
Displays photos in a specified folder one after another with photo effects. You can also play back music  
together with your photos by selecting a music file in the internal memory.  
Hint  
You can set the transition speed for displaying photos in [Frame settings] (page 57).  
Note  
If you change music to [Not specified] in the Options menu while displaying a Photos frame, changes will be applied  
the next time you play back frame.  
When playing a Photos frame, the first photo may be repeatedly displayed.  
When playing a Photos frame, the first photo in the Web service may take time to display.  
Photos in the Web service may not be displayed due to slow connection speeds or excessive Internet activity.  
ꢀ8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Shared frame  
Displays photos uploaded to the Web photo organizer by members at the same time. Information from  
members, such as friends or family, can be shared by displaying respective photos at the same time.  
Hint  
Up to 4 members can be registered for 1 Shared frame.  
You can set the style, order and interval for displaying photos in [Frame settings] (page 57).  
When new photos are uploaded to a Web server,  
lights up (page 8, 62). is displayed to members while displaying Shared frames.  
photos by on the remote control.  
is displayed on the Home screen and the New Info indicator  
disappears when changing  
  
Each time you press DISPLAY, the display changes as follows:  
“Photo with face icon“Photo only“Photo with guide“Photo with face icon…  
Note  
It may take some time to display the first photo after starting the Shared frame.  
Depending on the number of photos in the folder, it may take some time to display the first photo.  
The more members (up to 4) sharing the folder at the same time, the longer it takes to display the first photo.  
Photos in the Web photo organizer may not be displayed due to slow connection speed or excessive Internet activity.  
Memories frame  
/
Displays photos shot or updated within one month from today in the specified folder at random. Photos  
shot inthis time some years agomay be displayed since this unit displays photos regardless of shooting  
year. You can recall the days the photos were shot.  
Hint  
You can set the screen separation, style and interval for displaying photos in [Frame settings] (page 57).  
It is recommended to store as many photos in a single folder as possible.  
ꢀ9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Frame Created from Music Browse Screen  
In the music browse screen, you can easily create frames to continually play back selected music files or  
desired web radio stations of SHOUTcast.  
To create a frame, select the desired music file of folder from the music browse screen, or the desired web  
radio station, and select [Create new frame] in the Options menu (page 57).  
Music frame  
/
/
Continuously plays back your favorite music or desired web radio station of SHOUTcast.  
Hint  
Only the sleeve images of ID3 tag on music can be displayed.  
To stop playing music, press  on the remote control.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Frame Created from Information Browse Screen  
In the information browse screen, you can create frames to display information, such as news from an RSS  
site.  
To create a frame, select the desired RSS from the information browse screen, and select [Create new frame]  
in the Options menu (page 57). Up to 3 types of frame are available depending on the RSS.  
Hint  
The release date of the latest information from a Web site sending RSS feeds is displayed under each frame title (RSS name).  
News frame  
Displays RSS information provided from Google News U.K. (for U.K. model)/Google News (for U.S.A. model).  
Hint  
You can set the background design in [Frame settings] (page 57).  
RSS frame  
Displays information from RSS feeds to which you are registered.  
Hint  
For details on RSS registration, seeRegistering RSS(page 47).  
You can set the background design in [Frame settings] (page 57).  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Examples  
Example 1: Using [Picasa Web Albums by Google]  
“Picasa Web Albums by Googleis a Web service on the Internet provided from Google. With this wireless  
device, you can display photos on the Internet or upload photos to the Internet usingPicasa Web Albums  
by Google.  
This section shows how to usePicasa Web Albums by Google.”  
Note  
For Internet Web services, restrictions, such as the number of photos you can store, may be changed without notice. Check  
the Web site of the Web service for the latest information.  
Obtaining an Account for “Picasa Web Albums by Google”  
You need a computer in order to set up your account.  
Apart from having a Google account, you must register for the Picasa Web Albums.  
If you already have an account for Picasa Web Albums for Google, proceed toLogging in to Picasa Web  
Albums by Google(page 33).  
Hint  
For details onPicasa Web Albums by Google,see Google help.  
Without a Google account  
1
Go to http://www.google.com.  
2
Click [more]-[Photos].  
The log-in screen forPicasa Web Albums by Googleappears.  
3
Click [Create a new Google Account].  
The Create a new Google Account screen appears.  
4
Create a Google account and register for “Picasa Web Albums by Googleby  
following the on-screen instructions.  
After creating a Google account and completing user registration forPicasa Web Albums by Google,”  
proceed toLogging in to Picasa Web Albums by Google(page 33).  
3ꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
With a Google account  
1
Go to http://www.google.com.  
2
Click [more]-[Photos].  
The log-in screen forPicasa Web Albums by Googleappears.  
3
Enter [Email] and [Password], and click [Sign in].  
The user registration screen forPicasa Web Albums by Googleappears.  
4
Register for “Picasa Web Albums by Googleby following the on-screen  
instructions.  
After completing the user registration forPicasa Web Albums by Google,proceed toLogging in to  
Picasa Web Albums by Google.”  
Logging in to “Picasa Web Albums by Google”  
In order to log in, you need a wireless network connection.  
For details, seeConnecting to a Wireless Network(page 51).  
1
Press HOME on the remote control.  
The Home screen appears.  
2
Press on the remote control, select [ Settings] by pressing  
and press  
  
(ENTER).  
The Settings screen appears.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3
Select [ Server settings] by pressing  
(ENTER).  
on the remote control, and press  
  
The Server settings screen appears.  
4
5
Select [Google] by pressing  
on the remote control, and press  
(ENTER).  
  
The account setting screen to connect toPicasa Web Albums by Googleappears.  
Enter the e-mail address and password for the Google account, and enter the  
user name for “Picasa Web serviceif required.  
Note  
If the e-mail address at the account registration is Gmail, do not enter the user name forPicasa Web Albums,but  
enter the e-mail address and password for the Google account.  
3ꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
7
Press BACK on the remote control.  
The confirmation screen for testing the server connection appears.  
Select [Yes] by pressing  
on the remote control, and press  
(ENTER).  
  
If the connection test is successful, the complete screen appears.  
Hint  
If the connection test fails, double-check the e-mail address and password for the Google account and the user  
name forPicasa Web Service,and repeat from step 5. In addition, seeTroubleshooting(page 63).  
Uploading Photos toPicasa Web Albums by Googlefrom This Unit  
Photos stored on memory cards, such as Memory Stick media can be uploaded toPicasa Web Albums by  
Google.” This section shows how to upload photos on Memory Stick media inserted into this unit.  
Hint  
When uploading photos stored on a computer, see the Picase Web Albums by Google online help.  
Photos uploaded from this unit are registered asUnlisted.”To share the photo with others, you must change it toListed.”  
Some operations are necessary in a computer in order to do this. For details, see the Picase Web Albums by Google  
online help.  
3ꢂ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Uploading photos on Memory Stick media  
1
Display the desired folder or photo to upload by following the steps in  
“Displaying Data on the Browse Screen(page 18).  
If you want to upload only a photo, display the photo you want to upload. To upload a whole folder,  
select the folder. If you have selected a folder, photos only in the selected folder are uploaded, and  
photos in the sub folders are not.  
2
Press OPTIONS on the remote control.  
The Options menu appears.  
3
Select [Upload] by pressing  
on the remote control, and press  
(ENTER).  
  
The confirmation screen for uploading appears.  
4
Select [Yes] by pressing  
on the remote control, and press  
(ENTER).  
  
The album selection screen for uploading appears.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
5
Select the desired album to upload photos by pressing  
on the remote  
  
control, and press  
(ENTER).  
When uploading a folder, it is not necessary to select an album.  
“Uploading... Please waitappears, then the complete screen appears.  
Hint  
In the case of uploading a photo, if an album is not created inPicasa Web Albums by Google, create aDigital Photo  
Framealbum automatically, then upload. In the case of uploading a whole folder, create an album named the same  
with the folder automatically, then upload.  
Displaying Photos from “Picasa Web Albums by Google”  
You can display photos uploaded toPicasa Web Albums by Google, or photos from members sharing  
albums.  
Hint  
For sharing albums onPicasa Web Albums by Google,see help ofPicasa Web Albums by Google.”  
Note  
It may take some time to display uploaded photos.  
Displaying thumbnail images in the photo browse screen may take time.  
Photos onPicasa Web Albums by Googlemay not be displayed due to slow connection speed or excessive Internet  
activity.  
1
Press HOME on the remote control.  
The Home screen appears.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2
3
Press on the remote control, select [ Photos] by pressing  
, and press  
  
(ENTER).  
The server list appears.  
Select [ Picasa Web Albums by Google] by pressing  
on the remote  
  
control, and press  
(ENTER).  
Your nickname onPicasa Web Albums by Googleor the nicknames of members sharing albums  
appear.  
4
Select your nickname by pressing  
(ENTER).  
on the remote control, and press  
  
The album list appears.  
Hint  
To display photos of members sharing albums, select member nicknames.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Select the desired album containing target photos by pressing  
on the  
  
remote control, and press  
(ENTER).  
The photo list appears.  
6
Select the desired photo by pressing  
(ENTER).  
on the remote control, and press  
  
The selected photo is displayed.  
Hint  
You can create shared frames (page 29) by using photos onPicasa Web Albums by Google.”  
Members sharing albums can be added to the Shared frames (page 58).  
To add photos of others to the Shared frames, you need to register the photos toFavoriteinPicasa Web Albums by  
Google.For details on registering, see the Picasa Web Albums by Google online help.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Example 2: Displaying Photos Stored on Your Computer  
By using your computer with VAIO Media as your server, you can display photos on the computer on your  
wireless frame.  
Hint  
To use your computer as a server, you should connect your wireless frame to your wireless home network. For details, see  
“Connecting to Wireless Network(page 51).  
Setting up a Server  
Set a computer to work as a server.  
Note  
To connect a computer as a server to the same LAN as this unit, registration is required.  
Registering the computer as a server requires logging on as a user with administrator privileges, such asComputer  
administrator.For details, seeVAIO Media help.”  
Hint  
For further details on operations and the settings ofVAIO Media,seeVAIO Media help.”  
Starting VAIO Media Integrated Server  
1
Click [Start] on the computer, then click [All Program]-[VAIO Media]-[Server  
Administration]-[VAIO Media Server Settings].  
[VAIO Media Server Settings] starts up.  
2
Click [VAIO Media Integrated Server], then click [Start] if [Start/Stop server] is  
in [Stop] status.  
VAIO Media Integrated Server starts.  
Accessing to the computer  
1
Click [Start] on the computer, then click [All Program]-[VAIO Media]-[Server  
Administration]-[VAIO Media Server Settings].  
[VAIO Media Server Settings] starts up.  
2
Click [Access control settings.], then click [Allow other devices on your network  
to access this computer.].  
The [IMPORTANT] window appears.  
3
Confirm the contents in the window, and click [OK].  
ꢁ0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Displaying Photos on a Computer Set to Use with This Unit  
1
Press HOME on the remote control.  
The Home screen appears.  
2
Press on the remote control, select [ Photos] by pressing  
, and press  
  
(ENTER).  
The server list appears.  
Note  
Displaying the computer set for use with this unit on the list may take time. If a server list is not displayed, press  
OPTIONS on the remote control, select [Update information] by pressing  
will be renewed.  
, and press  
  
(ENTER). The server list  
3
Select the desired server containing target photos by pressing  
on the  
  
remote control, and press  
(ENTER).  
Folders or photos on the server appear.  
Hint  
If the server does not appear, refer toA server using software such asVAIO mediais not displayed in the listof  
Troubleshootingon page 63.  
ꢁ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4
5
Select the folder including the target photo by pressing  
on the remote  
  
control, and press  
(ENTER).  
The photo list appears.  
Hint  
The selected folder may contain subfolders. In this case, repeat step 4 until the target photo appears.  
If [Cannot show the server list] appears, press  
(ENTER) to return to the previous screen.  
Select the photo by pressing  
on the remote control, and press  
(ENTER).  
  
The photo is displayed.  
ꢁꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Example 3: Listening to Music or Web Radio Program  
Music and Web radio program of SHOUTcast can be played back in this unit. You can utilize the unit not  
only as a photo display but also as a music player.  
Playing Back Music in Memory Stick Media  
The steps below are an example of how to play back a music file stored in Memory Stick media. MP3 or WAV  
(LPCM) can be played in this unit.  
1
Insert a Memory Stick with a music file in the slot. (page 1ꢁ)  
The folders or photos stored on the Memory Stick media will be displayed after approximately 5  
seconds.  
Hint  
IfCannot show the server listappears, press  
(ENTER) and go to step 2.  
2
3
Press HOME on the remote control.  
The HOME screen appears.  
Press on the remote control, select [ Music] by pressing  
, and press  
  
(ENTER).  
4
Select [ Memory Stick] by pressing  
(ENTER).  
on the remote control, and press  
  
ꢁ3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
5
6
If the music file you want to play is inside a folder, select the folder by pressing  
on the remote control, and press (ENTER).  
  
The music file list is displayed.  
Hint  
Another folder may be displayed. In this case, repeat step 5 until the contents including the music you want to  
play are displayed.  
IfCannot show the server listappears, the folder does not contain any files in a format that can be played by this  
unit. Press  
(ENTER) to return to the previous display.  
Select the music by pressing  
on the remote control, and press  
(ENTER).  
  
The music is played back.  
Hint  
Only the jacket photo of ID3 tag can be displayed.  
Playing Back Web Radio Station of SHOUTcast  
To use SHOUTcast in this unit, it must be connected to a wireless network. For details, refer toConnecting  
to a Wireless Network(page 51).  
1
Press HOME on the remote control.  
The HOME screen appears.  
2
Press on the remote control, select [ Music] by pressing  
, and press  
  
(ENTER).  
ꢁꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3
Select [SHOUTcast Radio] by pressing  
(ENTER).  
on the remote control, and press  
  
The genre list of Web radio appears.  
4
5
Select a genre by pressing  
on the remote control, and press  
(ENTER).  
  
The Web radio stations list appears.  
Select a Web radio station, and press  
(ENTER).  
The Web radio station is played back.  
Hint  
By creating a music frame in a desired Web radio, it can be easily played back from HOME screen. To create the music  
frame, go to step 6.  
Note  
A tune in SHOUTcast cannot be copied to the internal memory.  
ꢁꢂ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
7
Press OPTIONS on the remote control.  
The Options menu appears.  
Select [Create new frame] by pressing  
(ENTER).  
on the remote control, and press  
  
A confirmation screen for creating a frame appears.  
8
9
Select [Yes] by pressing  
on the remote control, and press  
(ENTER).  
  
Press  
(ENTER) on the remote control.  
The created music frame is played back.  
To play back the created frame from the Home screen, refer toPlaying Back a Frameon page 26.  
ꢁ6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Example 4: Registering RSS  
By registering to Internet RSS feeds, you can easily browse the RSS information.  
Registering RSS  
1
Press HOME on the remote control.  
The Home screen appears.  
2
Press on the remote control, select [ Information] by pressing  
, and  
  
press  
(ENTER).  
3
4
Select [Web browser] by pressing  
(ENTER).  
on the remote control, and press  
  
The Web browser (Opera) starts.  
Display the URL of the RSS site to be registered on the Web browser.  
”Hint  
If you cannot find out the desired URL from the link, select [Input address] of the Options menu, press  
(ENTER), and input the desired URL directly.  
ꢁ7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
5
Press OPTIONS on the remote control to display the Options menu, select  
[Register RSS] by pressing and press (ENTER).  
  
The registered RSS is displayed on a list on the [Registered RSS] screen of the information browser.  
Displaying the Registered RSS  
1
Press HOME on the remote control.  
The Home screen appears.  
2
3
Press on the remote control, select [ Information] by pressing  
, and  
  
press  
(ENTER).  
Select [Registered RSS] by pressing  
(ENTER).  
on the remote control, and press  
  
The list of registered RSS appears.  
4
Select an RSS you want to browse by pressing  
on the remote control, and  
  
press  
(ENTER).  
RSS information appears.  
ꢁ8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Creating RSS Frame  
1
Follow the steps of “Displaying the Registered RSS(page ꢁ8) to display the  
RSS to be a frame.  
2
3
Press OPTIONS on the remote control.  
The Options menu appears.  
Select [Create new frame] by pressing  
(ENTER).  
on the remote control, and press  
  
A confirmation screen for creating a frame appears.  
4
5
Select [Yes] by pressing  
Background setting screen appears.  
on the remote control, and press  
(ENTER).  
  
Press on the remote control  
A confirmation screen for saving the setting contents appears.  
Hint  
The background or RSS frame can be set here. To change the initial one, press  
(ENTER) on the remote control,  
select a background by pressing , and press (ENTER).  
  
ꢁ9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
6
Select [Yes] by pressing  
The created RSS frame is played back.  
on the remote control, and press  
(ENTER).  
  
To play back the created RSS frame from the Home screen, refer toPlaying Back a Frameon page 26.  
ꢂ0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connection/Settings  
Connecting to a Wireless Network  
By connecting this unit to a wireless network or the Internet, you can play back photos or music stored on a  
computer or in a Web photo organizer on the Internet.  
Hint  
The reception icon is displayed when the information bar is at the top of the screen. The reception icon shows the  
strength of the network signal, many bars around the antenna show a stronger signal.  
To connect to a wireless network, the WLAN ON-OFF switch must be set to ON. The factory default setting is ON.  
Note  
In order to set up your home wireless network connection, you need a wireless LAN router and a subscription to an  
Internet service provider.  
Checking the Type of Access Points  
If the access point device (wireless LAN router) supports AOSS, seeSetting with AOSS.” Otherwise, see  
“Setting Manually(page 54).  
About AOSS  
AOSS™ (AirStation One-Touch Secure System) is a technology developed by Buffalo Technology. The  
wireless LAN can be connected with an one-touch operation, and security is set automatically.  
Setting with AOSS  
If you use an access point that supports AOSS, set by the following steps.  
1
Press HOME on the remote control.  
2
Press on the remote control, select [ Settings] by pressing  
, and press  
  
(ENTER).  
3
4
Select [ Network settings] by pressing  
on the remote control, and press  
  
(ENTER).  
The Network settings screen appears.  
Select [Select a connection] by pressing  
(ENTER).  
on the remote control, and press  
  
ꢂ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
5
6
7
Select [New connection] by pressing  
(ENTER).  
on the remote control, and press  
  
Select [Use AOSS] by pressing  
on the remote control, and press  
(ENTER).  
  
Reception of AOSS setting starts.  
Press and hold the AOSS button on the device until the access point indicator  
blinks.  
Access point device  
Press and hold the AOSS button until  
the access point indicator blinks.  
Hint  
For details on the AOSS button or indicator, see the operating instructions supplied with the access point device  
(wireless LAN router).  
ꢂꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Screen of this unit  
“Communicating AOSS information with the access point...appears.  
Note  
An access point with a concealed setting may not be detected. In this case, selectEnter manuallyin step 6, and  
follow the on-screen instructions.  
The AOSS setting will be canceled automatically if the access point cannot be found within 2 minutes of initiating  
reception. Cancellation of the process may take about 1 minute, depending on the network status. In this case,  
wait a moment.  
8
9
Confirm that “Configuring the access point completedis displayed.  
Press  
(ENTER) on the remote control.  
The setting screen for Proxy appears.  
10 If a Proxy setting is unnecessary, press  
on the remote control to proceed to  
the next step.  
The connection name is displayed.  
Hint  
If Proxy setting is necessary, press  
(ENTER) on the remote control and selectUseby pressing  
, and press  
  
(ENTER). Then set the address and port number of the Proxy server.  
For home use, Proxy setting is usually unnecessary. If Proxy setting is required, consult the administrator of the home  
network or your Internet service provider.  
ꢂ3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11 If the connection name is unnecessary to change, press  
on the remote  
control to proceed to the next step.  
The confirmation screen for settings appears.  
Hint  
Normally it is unnecessary to change the connection name.  
12 Confirm the setting, and press  
on the remote control to proceed to the next  
step.  
13 Select [Yes] by pressing  
on the remote control, and press  
Connection to the access point is confirmed. When connected properly, “Network connection  
(ENTER).  
  
completedis displayed.  
Setting Manually  
If the access point device does not support AOSS, or AOSS does not work properly, set manually by the  
following steps.  
1
Confirm the access point information.  
Confirm the following information. For details on the access point device (wireless LAN router), see the  
operating instructions supplied with the access point device, or consult the access point provider.  
SSID  
Identification for the access point.  
Security type  
Security type depends on the access point. With this unit, [None], [WEP], [WPA-PSK (TKIP)], [WPA-  
PSK (AES)] can be selected.  
Encryption key  
WEP key or WPA key is required depending on the selected security type.  
2
Display the screen below by following steps 1 to ꢂ in “Setting with AOSS(page  
ꢂ1).  
ꢂꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3
4
Select [Search] by pressing  
on the remote control, and press  
(ENTER).  
  
A list of available access points is displayed.  
Select an access point by pressing  
proceed to the next step.  
on the remote control, and press to  
  
The confirmation screen for SSID appears.  
Hint  
If several access points are displayed, select SSID of the access point in use.  
5
6
Press on the remote control to proceed to the next step.  
The selection screen for the security type appears.  
Select the security type by pressing  
on the remote control, and press to  
  
proceed to the next step.  
Select the security type confirmed in step 1.  
If selecting other than [None], the screen to enter the WEP key or WPA key appears.  
Hint  
When selecting [None], proceed to step 12.  
7
Press  
(ENTER) on the remote control to display the software keyboard,  
enter the WEP key or WPA key, and press  
(ENTER).  
Enter the password confirmed in step 1.  
ꢂꢂ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
9
Press on the remote control to proceed to the next step.  
The selection screen for address settings appears.  
Select [Easy] by pressing  
the next step.  
on the remote control, and press to proceed to  
  
The setting screen for the connection name appears.  
Hint  
Select [Custom] to manually set information, such as the IP address.  
10 If it is unnecessary to change the connection name, press  
on the remote  
control to proceed to the next step.  
The confirmation screen for settings appears.  
Hint  
Normally it is unnecessary to change the connection name.  
11 Confirm the setting, and press  
on the remote control to proceed to the next  
step.  
12 Select [Yes] by pressing  
on the remote control, and press  
Connection to the access point is confirmed. When connected properly, “Network connection  
(ENTER).  
  
completedis displayed.  
ꢂ6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Options Menu List  
You can display the Options menu by pressing OPTIONS while a screen is displayed.  
Home screen  
Status  
Options/Descriptions  
During frame selection  
[Move up][Move down][Move to top][Move to end]: Rearranges the frame  
order in the list by moving the selected frame.  
[Delete frame]: Deletes the frame currently selected.  
During music playback  
[Track being played]: Displays the music browse screen of the music being  
played.  
Frame screen  
Status  
Options/Descriptions  
While displaying frame  
[Frame settings] (except for Music frame): Configures the various settings  
for frames.  
[Capture frame screen]: Stores the desired display playing back by the frame  
playback as a thumbnail, and displays it in the frame list of Home screen.  
[Delete from shared frame]: Deletes members registered in the shared  
frame currently being played.  
[Start Web browser] (Photos and Info frame only): Displays Google News  
U.K. (for U.K. model)/Google News (for U.S.A. model), or the registered RSS.  
Browse screen  
Status  
Options/Descriptions  
While photo browsing  
[Update information]: Updates the list of external memory or servers.  
[Connection test]: Performs the connection test for memory or servers.  
[Play]: Plays all photos in the folder currently selected as a slide show  
(Background music cannot be selected).  
[Create new frame]: Creates a new frame to display photos.  
[Copy to internal memory]: Copies the selected folder or the currently  
playing photo to the internal memory. For details, refer toCopying Data to  
the Internal Memory(page 20).  
[Upload]: Uploads folders or photos in the external memory to the Web  
service on the Internet.  
ꢂ7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Status  
Options/Descriptions  
While photo browsing  
[Set as background photo]: Sets the photo currently displayed to the  
background image of the Home screen or Settings screen.  
[Add to shared frames]: Adds members (folders) currently selected to the  
created Shared frame.  
[Delete photos]: Deletes a photo in the internal memory. (Multiple photos  
cannot be deleted at the same time.)  
[Delete all in the folder]: Deletes all photos in the internal memory.  
[Reload]: Reloads the displayed photo.  
When displaying photos on this unit, photo data will be stored in cache  
memory temporarily. If a photo is recognized as unknown data, it may be  
displayed as unknown data next time.  
“Not Authorizedis displayed immediately after uploading photos to the  
Internet Web service.  
Despite rotating a photo in the Internet Web service, the photo is  
displayed not rotated.  
The correct photo is not displayed after assigning the identical file name  
to another photo.  
In these cases, perform [Reload].  
While music browsing  
[Update information]: Updates the list of external memory or servers.  
[Connection test]: Performs a connection test for memory or servers.  
[Create new frame]: Creates a new frame to play a music file.  
[Copy to internal memory]: Copies the currently playing music file to the  
internal memory. For details, refer toCopying Data to the Internal Memory”  
(page 20).  
[Delete track]: Deletes a music file in the internal memory. (Multiple music  
files cannot be deleted at the same time.)  
While information  
browsing  
[Connection test]: Performs a connection test for the wireless network.  
[Delete RSS]: Deletes a registered RSS from the list.  
[Create new frame]: Creates a new frame to display RSS information.  
ꢂ8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Web browser (Opera) screen  
Status  
Options/Descriptions  
While displaying Web  
browser (Opera)  
[Input address]: Displays the Web site by entering the address directly.  
[Bookmarks]: Displays the target Web site from the bookmark list. You can  
add/delete up to 20 favorite sites in the bookmark list.  
[Zoom]: Zooms in/out the Web site.  
[Register RSS]: Registers a URL as RSS (up to 20) if the Web site currently  
displayed is RSS. The registered RSS is displayed in the list on the [Registered  
RSS] screen of the information browse screen.  
[Delete cookies]: Deletes all cookies.  
[Exit Web browser]: Closes the Opera browser.  
ꢂ9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Settings Menu  
You can make more detailed settings in the Settings screen.  
You can display the Settings screen by pressing in the Home screen, selecting [ Settings] by pressing  
, and pressing  
(ENTER).  
  
Network settings  
Item  
Options/Description  
Select a connection  
Selects a registered wireless LAN connection from a list. Or creates a new  
wireless LAN connection (page 51). You can set up to 5 wireless LAN  
connections.  
Edit connection settings  
Delete a connection  
Edits created wireless LAN connection settings, or selects a new wireless LAN  
connection (page 51). You can set up to 5 wireless LAN connections.  
Deletes a created wireless LAN connection from the list.  
Server settings  
Item  
Options/Description  
Google  
Sets up an account for connecting to Web services. Enter the account  
information of your computer (page 32).  
Remote Home Access  
Sets up an account for the Remote Home Access server (up to 5 accounts).  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Date and time settings  
Item  
Options/Description (underlined option is the default setting)  
Set Manually  
Sets up the date and time manually.  
Set automatically  
Connects to the Internet time server and updates the date and time  
automatically when set to [On]. You can also change the Internet time server.  
The default setting is [Off].  
To use this feature, connect to a wireless LAN (page 51). When the date and  
time are set in [Set Manually], [Set Automatically] is set to [Off ].  
Date format  
Time format  
Time zone  
Sets up the date format.  
[YYYY/MM/DD], [MM/DD/YYYY], [DD/MM/YYYY]  
Sets up the time format.  
[12-hour], [24-hour]  
Sets up the time zone. The default setting differs depending on the area  
setting.  
Daylight saving time  
Set a clock ahead  
Sets the clock ahead one hour when set to [On]. The default setting is [Off].  
Sets the clock ahead up to 30 minutes in 1-minute increments. The setting is  
applied to the clock on frames and the timer.  
Screen display  
Item  
Options/Description  
Photo display position  
Sets up the photo display position on the screen while playing a frame. The  
photo is displayed in the center of the screen in its original size when [Entire  
photo] is selected. The default setting is [Fit to screen].  
Brightness adjustment  
Demonstration  
Adjusts the screen brightness in 11 levels. The default setting is [10].  
Starts the demonstration if no operation is performed for more than 1 minute  
while the Home screen is displayed (photos and music demonstration are  
played). The default setting is [Off].  
Timer settings  
Item  
Options/Description  
Set Start Timer  
Set Stop Timer  
Starts playing a frame at a specified time. Up to 3 timer settings can be created.  
Sets this unit to go into standby mode at a specified time.  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
System settings  
Item  
Options/Description (underlined option is the default setting)  
Device name  
Registers a device name for this unit.  
Auto power on/off  
This unit goes to standby mode automatically when the surrounding area  
becomes dark. The power comes back on automatically when the surrounding  
area becomes bright. The default setting is [Off].  
New info indicator  
Sets up the lighting pattern of the New Info indicator (always off in standby mode).  
[Always on (with new arriv.)], [Auto on/off (with new arriv.)], [Always on], [Always off ].  
System information  
Internal memory info  
Important messages  
Displays [MAC address], [IP address] and [Software version].  
Displays the current usage of the internal memory.  
Displays update information and some other important information. When  
updating is completed, the power of this unit turns off automatically. After  
confirming the power is turned off, disconnect the AC adapter, and leave for  
more than 30 seconds, then connect the AC adapter again.  
About VGF-CP1  
Displays copyright and trademark information.  
Initialization  
Item  
Options/Description (underlined option is the default setting)  
Initialize system  
Initialize settings  
Restores the system to the factory default.  
Returns the settings to their factory defaults.  
All registered frames are deleted, and sample frames are restored to their  
defaults.  
Initialize internal memory Resets internal memory to the factory default.  
All registered photos and music files are deleted, and sample photos and music  
files are restored to their defaults.  
Initialize cache  
Resets the cache memory to the factory default by performing [Reload] for all  
photos.  
Data stored in the cache memory is deleted; however, photo files remain undeleted.  
6ꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting  
Troubleshooting  
If a problem occurs, check the following tables with the operating instructions and/or electronic manuals  
supplied with your computer. In addition, seeGetting Help(page 71) for details, and visit our online  
support site.  
Turning on the power  
Condition  
Cause/Remedy  
The power cannot be turned  
on.  
Make sure the AC power adapter is securely plugged into AC IN on the  
unit and the wall outlet (page 12, 13).  
Static electricity may cause a malfunction. In this case, disconnect the  
AC power adapter and leave for more than 30 seconds, then connect  
the AC power adapter again.  
Displaying data on the browse screen  
Condition  
Cause/Remedy  
[Cannot show the server list] is  
displayed.  
This unit may not be connected to a memory or server properly.  
Perform the connection test.  
Display the server list in [ Photos] or [ Music], and select a  
memory or server you want to test, and then press OPTIONS.  
Select [Connection test] in the Options menu, and press  
(ENTER).  
The connection test starts. Follow the on-screen instructions if the  
connection fails.  
Check the server settings on this unit when the Web service or Remote  
Home Access server is selected.  
A folder storing no photos/or music files cannot be opened.  
[Cannot show photos] is  
displayed.  
Some photo files may not be displayed depending on the file format.  
Some photo files may not be displayed depending on the file size.  
Some photo files may not be displayed if the files have been edited on  
a computer.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Condition  
Cause/Remedy  
[Cannot play tracks] is  
displayed.  
Some music files may not be played back depending on the file format.  
[Cannot show the item] is  
displayed.  
This unit may not be connected to a network properly. Perform the  
connection test.  
Select [ Information] in the Home screen, and press  
Press OPTIONS.  
(ENTER).  
Select [Connection test] in the Options menu, and press  
(ENTER).  
The connection test starts. Follow the on-screen instructions if  
connection fails.  
Web service is not displayed in  
the list.  
The server may not be set. Check the Server settings.  
A server using software such  
asVAIO Mediais not  
displayed in the list.  
This unit or the server is not connected to a network. See the cause/  
remedy of[A connection error occurred] as displayedinConnecting  
to Wireless Network(page 51).  
The server is not active. Check the following:  
The server is turned on.  
The server status ([Start/Stop server]) is set to [Start].  
This unit is registered with the server. For registration, refer to the  
Help section of the server software in use, or the operating  
instructions supplied with the server.  
The server may not be recognized if this unit is turned on before  
turning on the server. Select [Update information] in the Options menu  
to update the list.  
If a computer is used as a server, check the following:  
The computer may be unstable. Restart the computer.  
This unit may not connect to a computer with an Internet  
connection fire wall (ICF) function on. For fire wall information, see  
the Help section for the security software in use.  
Register this unit to the server individually.  
Click [Start] in the computer used as the server, and click [All  
Program]-[VAIO Media]-[Server Administration]-[VAIO Media Server  
Settings] to start VAIO Media Integrated Server.  
Click [Access Control Settings] page, and click [Register].  
After starting the device registration wizard, put a check mark on  
[Manually register the device by entering the MAC address], and  
click [Next].  
Follow the instructions on the screen to register this unit.  
6ꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Condition  
Cause/Remedy  
External memory is not  
displayed in the list.  
External memory may not be inserted correctly. Make sure the external  
memory is inserted in the correct direction.  
[Cannot use this device] is  
displayed.  
A USB device that is not Mass Storage Class cannot be used.  
Photo data is not recognized.  
Unsupported photo files cannot be recognized.  
Photos uploaded to the Web service on the Internet take time to be  
displayed with this unit. Wait for a while, and display the browse screen.  
When a digital still camera is connected to this unit with a USB cable,  
the digital still camera may not be set to Mass Storage Class. For the  
Mass Storage Class setting, see the operating instructions supplied  
with the digital still camera.  
Music data is not recognized.  
Unsupported music files cannot be recognized.  
It takes time to display photos.  
Sound interrupts during  
playback.  
The frequency bandwidth of the wireless network may not be  
sufficient. Place the access point device near this unit without  
obstacles in-between.  
Height-and-width of a photo is  
not displayed properly.  
This unit corresponds to the height-and-width information at shooting  
recorded in the exif data of the photo. Height-and-width may not be  
displayed properly in some photos shot by a digital still camera that  
does not record height-and-width to the exif data, or photos edited by  
the computer.  
6ꢂ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing back a frame  
Condition  
Cause/Remedy  
[Cannot show photos] is  
displayed.  
This unit may not be connected to a memory or server properly.  
Perform the connection test.  
[Cannot play tracks] is  
displayed.  
Display the server list in [ Photos] or [ Music], and select the  
memory or server you want to test, and then press OPTIONS.  
Select [Connection test] in the Options menu, and press  
(ENTER).  
[Cannot show the item] is  
displayed.  
The connection test starts. Follow the on-screen instructions if  
connection fails.  
When a server using software such asVAIO Mediais specified to the  
frame, see the cause/remedy ofA server using a software, such as  
VAIO Mediais not displayed in the listinDisplaying data on the  
browse screen(page 64).  
External memory specific to the frame may not be inserted correctly.  
Make sure the external memory is inserted in the correct direction.  
The name of the folder specific to the frame may have been changed,  
or the folder specific to the frame may have been deleted. Check the  
folder stored in the memory or server.  
The address of the Internet radio station may be changed in  
SHOUTcast. Play back the same Internet radio station in the music  
browse screen, and create a new frame.  
The address of RSS site may be changed in the registered RSS. Perform  
[RSS registration] again in Web browser, display the same RSS in the  
information browse screen, and create a new frame.  
[Cannot show photos] is  
displayed for members in a  
Shared frame.  
A member may have deleted the account of a Web service on the  
Internet.  
[Cannot show photos.] is  
displayed in the Memories  
frame.  
Photos shot or updated within one month from today can be  
displayed in the Memories frame. The last update date, usually the date  
the photo was shot, may be updated depending on the way the photo  
data is imported. If the photo data is edited, the date the photo was  
edited will become the last updated date.  
Photos are not switched  
automatically in the Photos  
and Info, Shared and Memory  
frames.  
Photos may not be switched at the specified interval time immediately  
after playing back a frame. Wait for a while or press to switch to the  
next photo manually.  
Photos are not switched automatically when  
is displayed in a  
Shared frame. Press to switch to the next photo manually.  
disappears and photos are switched automatically.  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Condition  
is not displayed in a  
Cause/Remedy  
Photos uploaded to a Web service on the Internet take time to display  
on the unit. Wait for a while, then play back the frame.  
Shared frame.  
The clock does not work  
properly in the Photos and Info  
frame.  
Date and time may be reset if the unit is disconnected from the AC  
adapter. Set the date and time by [ Date and time settings] in  
[
Settings].  
News is not displayed in the  
Photos and Info frame.  
The unit may not be properly connected to the network. See the  
cause/remedy of[Cannot show the item] is displayed.inPlaying back  
a frame(page 66).  
The same photo is displayed  
repeatedly in the Photos  
frame.  
As a system restriction, the same photo may be displayed repeatedly  
immediately after starting the frame. This is not a malfunction.  
Start timer does not work  
properly.  
The start timer may be set to [Off.] Check the start timer setting.  
The frame specified by the start timer may have been deleted. In this  
case, the start timer setting is reset to the factory default.  
The start timer may not work if the Settings, Options or browse screen  
is displayed at the time the start timer is set.  
Stop timer does not work  
properly.  
The stop timer may be set to [Off.] Check the stop timer setting.  
The stop timer may not work if the Settings, Options or browse screen  
is displayed at the time the stop timer is set.  
Connecting to a Wireless Network  
Condition  
Cause/Remedy  
[A connection error occurred]  
is displayed.  
This unit is not connected to the network. Check the following.  
The WLAN ON/OFF switch is set to ON.  
The network setting is correct.  
All cables are connected securely.  
The connected device(s), such as the access point device (wireless  
LAN router), is turned on.  
The cable type (straight or cross) is correct.  
The MAC address is required for network connection depending on  
the access point setting. The MAC address can be checked in [System  
information] of [ System settings] in [ Settings].  
The frequency bandwidth of the wireless network may not be  
sufficient. Place the access point device or wireless adapter near this  
unit without obstacles in-between.  
A device, such as a microwave, around this unit may cause interference,  
and result in poor communication.  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Condition  
Cause/Remedy  
[Cannot find an access point] is  
displayed.  
This unit is not connected to the network. See the cause/remedy of[A  
connection error occurred] is displayed.inConnecting to Wireless  
Network(page 67).  
[The connection test failed.  
Unable to log on to a server] is  
displayed.  
The server setting may not be correct. Check the setting.  
This unit may not be connected to the network. See the cause/remedy  
of[A connection error occurred] is displayed.inConnecting to  
Wireless Network(page 67).  
This unit may not be connected properly to the server. Perform the  
connection test.  
Display the server list in [ Photos] or [ Music], and select the  
Web service to test, and then press OPTIONS.  
Select [Connection test] in the Options menu, and press  
(ENTER).  
The connection test starts. Follow the on-screen instructions if  
connection fails.  
Options  
Condition  
Cause/Remedy  
[Upload] is not displayed in the  
Options menu.  
[Upload] is displayed only when browsing the external memory. Only  
photos stored in the external memory can be uploaded to the Web  
service on the Internet.  
[Delete photos] is not  
displayed in the Options  
menu.  
[Delete photos] is displayed only when browsing the internal memory.  
Only photos stored in the internal memory can be deleted.  
[Upload failed] is displayed.  
[Copy process failed] is  
displayed.  
This unit may not be properly connected to a memory or server.  
Perform the connection test.  
Display the server list in [ Photos] or [ Music], and select the  
memory or server to test, and then press OPTIONS.  
Select [Connection test] in the Options menu, and press  
(ENTER).  
The connection test starts. Follow the on-screen instructions if the  
connection fails.  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Condition  
Cause/Remedy  
[The deletion failed] is  
displayed.  
This unit may not be connected to a memory properly. Perform the  
connection test.  
Display the server list in [ Photos] or [ Music], and select the  
memory to test, and then press OPTIONS.  
Select [Connection test] in the Options menu, and press  
(ENTER).  
The connection test starts. Follow the on-screen instructions if the  
connection fails.  
If the Memory Stick media or SD/SDHC memory card is equipped with  
a write-protect switch, the switch may be set to the lock position. Set  
the switch to the unlock position.  
[Cannot copy this track] is  
displayed.  
Some music files may not be stored depending on the file format. In  
this case, store the file In MP3 file format.  
Others  
Condition  
Cause/Remedy  
Does not accept operation.  
Does not work properly.  
This unit may not work properly due to static electricity. Disconnect the  
AC adapter, and leave for more than 30 seconds, then connect the AC  
adapter again.  
The remote control does not  
work.  
The battery may be inserted in the wrong direction. Insert the battery  
in the correct direction (page 13).  
Dark screen. Poor visibility.  
Adjust the brightness by [Brightness adjustment] of [ Screen display]  
in [ Settings] (page 61).  
Does not accept MUSIC  
operation.  
Pressing MUSIC will not work while the Settings or browse screen is  
displayed. To play back music, press MUSIC after closing the Settings or  
browse screen.  
If MUSIC is pressed while paused, MUSIC is unavailable until music  
starts playing back. Press MUSIC after starting playback.  
Music stops during playback.  
Music playback stops automatically when the Settings or browse  
screen is displayed. Pressing MUSIC does not work until playback starts.  
Press MUSIC after starting playback.  
The Web site is not displayed  
properly.  
A Web site may not display properly depending on the site.  
The volume cannot be  
adjusted.  
The volume can be adjusted only when playing back music. Adjust the  
volume during playback.  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Condition  
Cause/Remedy  
[Failed to update the clock] is  
displayed.  
The Internet time server may be unstable. Wait for a while to restart  
updating.  
Auto updating of the clock  
does not work properly.  
This unit may not be connected to the network. See the cause/remedy  
of[A connection error occurred] is displayed.inConnecting to  
Wireless Network(page 67).  
[Set automatically] of [ Date and time settings] may be set to [Off].  
Check the setting (page 61).  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Help  
This section provides information on how to get help and support from Sony, and troubleshooting tips for  
your Digital Photo Frame.  
About Sonys support options  
Sony provides several support options for your Digital Photo Frame. If you have any questions regarding  
your Digital Photo Frame, refer to the following:  
This manual explains how to use your Digital Photo Frame.  
For customers in the United States and Canada  
The Sony Customer Information Service Center offers information about your VAIO  
computer and other Sony products that work with your computer. To contact Sony  
Customer Information Service Center, call  
1-888-4SONYPC (1-888-476-6972).  
Sony Online Support provides instant access to information on commonly encountered  
problems. Type a description of the problem and the Knowledge Database searches for  
corresponding solutions online.  
You can visit Sony Online Support at:  
http://esupport.sony.com/EN/VAIO/  
For customers in Europe  
VAIO-Link. For addresses and telephone numbers, refer to  
http://www.vaio-link.com/  
For further service support information, refer to the Warranty/Customer support  
information.  
For customers in other countries and regions  
VAIO Website provides Frequently Asked Questions and solutions.  
http://www.vaio-online.sony.com/  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Precautions/Others  
Specifications  
Size: 7 inch  
Display  
Resolution: 800 x 480 dots  
Color: Max. 16.77M  
L/R 1.6W  
Speaker maximum output  
Memory cards  
Memory Stick, Memory Stick PRO, Memory Stick Duo, Memory Stick PRO Duo, SD/  
SDHC memory card, CompactFlash card (CF)  
JPEG, JPEG Progressive*1, BMP*1, PNG*1, PNG Progressive*1, GIF*1, GIF Progressive*1  
Supported photo file  
MP3, WAV (LPCM)*2  
USB terminal (1)  
Approx. 100MB*3  
Supported music file  
External connection terminal  
Internal memory  
(available for user)  
IEEE 802.11b/g (WEP (64bit/128bit)/WPA-PSK (TKIP/AES)) Wireless LAN system  
supporting AOSS*4  
Wireless connection  
Windows® XP SP2, Windows Vista® with SP1-based computer, VGF-HS1 series  
Target computer  
Dimension  
177 (w) x 133.5 (h) x 33 (d) mm (without stand)  
177 (w) x 131 (h) x 103 (d) mm (when placing with stand)  
530g (with stand)  
Mass  
5.5W to 12W  
Power consumption  
3.1W (in standby mode)  
Input: AC 100V-240V, 0.5A, 50/60Hz  
Output: DC 6V, 2.5A  
Power (AC adapter)  
1
*
*
*
*
Maximum file size is 3MB.  
2
3
4
WAV files cannot be copied to the internal memory.  
Approximately 85MB is available for photo files, and approximately 15MB for music files.  
AOSS™ is an easy connection and setting technology developed by Buffalo Technology.  
Design and specifications are subject to change without notice.  
Other system and product names used herein are registered trademarks or trademarks of their respective manufacturers,  
although the ™ and ® marks are not used in the text.  
7ꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
On the LCD screen  
Precautions  
The LCD screen is manufactured using  
extremely high-precision technology so over  
99.99% of the pixels are operational for effective  
use. However, some tiny black and/or bright  
dots (white, red, blue or green) may appear on  
the LCD screen. These dots are a normal result  
of the manufacturing process, and do not affect  
operation or signify malfunction.  
Do not place or drop objects on the screen, or  
do not lean on the screen with your hands or  
elbows.  
Do not scratch the screen with a cutter or other  
sharp tool.  
On handling your unit  
Do not lift or carry the unit by holding the stand  
only. Inclination of the unit may cause a  
malfunction.  
Do not drop or subject the unit to excessive  
shock. Doing so may result in data loss, or cause  
a malfunction.  
Do not place the unit in locations subject to  
extreme changes in temperature such as in  
direct sunlight or near a heater. Doing so may  
cause a malfunction.  
Do not insert any metallic object, such as a  
paper clip, into the unit.  
On moisture condensation  
If the unit is brought directly from a cold to a  
warm location, moisture may condense inside or  
outside the unit. In this state, your unit may not  
operate correctly, and may cause a malfunction. If  
moisture condensation occurs, wipe off any  
moisture with a dry soft cloth. If the screen gets  
cold, turn off the unit and wait about an hour for  
any moisture to evaporate.  
Do not place the unit in a location subject to  
mechanical vibration, or in an unstable position.  
Do not use this unit in a location subject to  
excessive dust since this unit is manufactured  
using extremely high precision technology.  
Doing so may cause a malfunction.  
Do not use this unit in a high humidity location.  
Do not use the unit in a poorly ventilated  
location.  
Do not place the unit near objects that are  
magnetized, or that generate electromagnetic  
energy. Doing so may cause a malfunction.  
On parts replacement  
This unit includes parts with a finite life  
expectancy; deterioration of such parts will  
depend on usage environment and frequency.  
Replace worn parts if significant performance  
degradation occurs as a result.  
If you have any questions or problems concerning  
your unit, consult the local dealers in your area.  
SeeGetting Help(page 71) for details, and visit  
our online support site.  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
On handling Memory Stick media  
On the AC adapter  
Keep the following in mind to protect data on  
Memory Stick media.  
For your safety, do not use the AC adapter other  
than the AC adapter supplied with your unit.  
Do not use an electronic transformer (travel  
converter), as this may cause a malfunction.  
For your safety, do not use an AC adapter with a  
damaged cable.  
Do not touch a Memory Stick’s connector with  
your finger or metallic objects.  
On using the software  
The software supplied with your unit is provided  
under the royalty contract and the license  
agreement, and unauthorized copying of the  
software by lending or borrowing is strictly  
prohibited by law. Be sure to read the software  
license agreement carefully before using the  
software.  
Do not attach a label to a Memory Stick other  
than the one supplied.  
Apply the label in the prescribed position on  
the Memory Stick.  
Use the storage case supplied with the Memory  
Stick media when carrying or storing.  
Do not bend, drop, or apply strong shock to a  
Memory Stick.  
Do not disassemble or modify a Memory Stick.  
Do not let a Memory Stick become wet.  
Do not use or store a Memory Stick in a location  
subject to:  
On cleaning your unit  
Before cleaning, turn off the unit, and then  
disconnect the power cord from the wall outlet.  
Wipe off any surface dirt or dust with a dry  
cloth.  
Be sure to wipe off the dirt or dust with a soft  
and dry cloth. If the surface is soiled, clean with  
a soft cloth lightly moistened with water, and  
then wipe the surface with a dry soft cloth.  
Do not use chemical cleaners containing  
benzene, acetone, alcohol or thinner as they  
may damage the surface.  
Extremely high temperatures, such as in a car  
parked in the sun  
Direct sunlight  
High humidity or highly corrosive atmosphere  
On using Memory Stick Duo media  
Be careful not to apply excessive force when  
writing on the memo area of a Memory Stick  
Duo.  
When using a chemical cloth, follow its  
instructions.  
Make sure the Memory Stick Duo is inserted  
facing in the correct direction. If you insert a  
Memory Stick Duo in the wrong direction, the  
Memory Stick slot and media may be damaged.  
Do not insert a Memory Stick and Memory Sick  
Duo at the same time. Doing so may damage  
the Memory Stick slot and media.  
On cleaning the LCD screen  
Avoid touching the LCD screen as it has a  
special coating.  
When cleaning, use a dry soft cloth and lightly  
wipe off.  
If the surface is soiled, clean with a soft cloth  
lightly moistened with water, and then wipe the  
surface with a dry soft cloth.  
Do not use a chemical cloth or chemical  
cleaners containing benzene, acetone, alcohol  
or thinner as they may damage the surface  
treatment of the screen.  
7ꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Trademarks  
VAIO is a trademark of Sony Corporation.  
, “Memory Stick,”“Memory Stick Duo,”“MagicGate,”“MagicGate Memory Stick,”“Memory Stick  
PRO,”“Memory Stick PRO Duo,and Memory Stick logo are trademarks or registered trademarks of Sony  
Corporation.  
Microsoft, MS-DOS, Windows, and Windows Vista are either registered trademarks or trademarks of  
Microsoft Corporation in the United States and/or other countries.  
SD Logo is a trademark.  
SDHC Logo is a trademark.  
This VGF-CP1 contains Adobe® Flash® Lite™ player software and under license from Adobe Systems  
Incorporated,  
Adobe Flash Lite Copyright © 2003-2007 Adobe Systems Incorporated. All rights reserved.  
Adobe, Flash and Flash Lite are trademarks of Adobe Systems Incorporated in the United States and  
other countries.  
AOSS™ (AirStation One-Touch Secure System) is the trademark of BUFFALO INC.  
Copyright © 2003-2008 Google Inc. All rights reserved.  
Picasa, Picasa Web Albums and the Picasa logo are trademarks of Google Inc.  
Picasa Web Albums is a free photo sharing service from Google.  
Contains iType™ rasterizer and TrueType font from Monotype Imaging Inc.  
Monotype® is a trademark of Monotype Imaging Inc. registered in the U.S. Patent and Trademark Office  
and may be registered in certain jurisdictions.  
Frutiger™ LT Std-Roman typeface is from the Linotype typeface library.  
Frutiger™ is a trademark of Linotype Corp. registered in the U.S. Patent and Trademark Office and may be  
registered in certain other jurisdictions in the name of Linotype Corp. or its licensee Linotype GmbH.  
Opera is a trademark of Opera Software ASA.  
SHOUTcast is a registered trademark of AOL LLC.  
All other names of systems, products and services are trademarks of their respective owners. In the manual,  
the ™ or ® marks are not specified.  
7ꢂ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Important notices on the software  
Thank you for purchasing this Sony Digital Photo Frame.  
Before using this product with software, be sure to read the following notices carefully.  
The beginning to use of this product will be assumed that contents of notices are confirmed and agreed by  
the customer.  
End User Software License Agreement (For Customer in Europe)  
This End User Software License Agreement (theEULA”) is a legal agreement among you and Sony  
Corporation (hereinafter referred to asSONY”), a corporation organized under Japanese Law, the  
manufacturer of your SONY digital photo frame (theSONY HARDWARE”) and each of Sony’s third party  
licensors of any of the SONY SOFTWARE (defined below) . Please read this EULA carefully (1) in case of your  
first use of SONY HARDWARE, before using the Sony software and any third party software installed in the  
SONY HARDWARE, (2) in case of your installing the software bundled with the SONY HARDWARE, before  
installing such software or, (3) in case of your downloading update of such software installed in or bundled  
with the SONY HARDWARE, before downloading such updated software , (such software; theSONY  
SOFTWARE”). By using the SONY SOFTWARE, or clicking on theACCEPTbutton or similar button or links as  
may be designated by SONY, you agree to be bound by the terms of this EULA. You may use the SONY  
SOFTWARE only in connection with the use of the SONY HARDWARE. SONY SOFTWARE is licensed and not  
sold.  
Notwithstanding the foregoing, software distributed together with separate End User Software License  
Agreement (theThird Party EULA”) shall be covered by the Third Party EULA.  
If you do not agree to the terms of this EULA, you must not use it.  
1. License. This SONY SOFTWARE and the related documentation are licensed to you by SONY. The SONY  
SOFTWARE is licensed as single product and may not be separated for your personal use. You may use the  
SONY SOFTWARE (1) on the SONY HARDWARE or (2) in conjunction with the SONY HARDWARE by (i)  
installing or downloading the SONY SOFTWARE onto your personal computer and (ii) subsequently  
uploading the SONY SOFTWARE onto the SONY HARDWARE by accessing the designated SONY SOFTWARE  
set-up page.  
2. Restrictions. The SONY SOFTWARE contains copyrighted material and other proprietary material. In order  
to protect them, and except as permitted by applicable law, you may not decompile, reverse engineer or  
disassemble the SONY SOFTWARE in whole or in part. Except for the transfer of the SONY SOFTWARE  
together with the SONY HARDWARE and prior agreement of the recipient to be bound by the terms and  
conditions of this EULA, you may not sell or rent the SONY SOFTWARE and its copy to any third party.  
3. Limited Warranty. For the case set forth in (2) of the first paragraph, SONY warrants the media on which  
the SONY SOFTWARE is recorded to be free from physical defects for a period of ninety (90) days from the  
date of purchase as evidenced by a copy of the receipt. During the applicable warranty period, SONY will  
replace free of charge such media that proved to be defective. SONY will have no responsibility to replace  
media damaged by accident, abuse, or misapplication.  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The above limited warranty replaces all other representations, conditions and warranties, whether express  
or implied, by statute or otherwise and SONY AND ITS THIRD PARTY LICENSORS EXPRESSLY DISCLAIM ALL  
OTHER WARRANTIES AND ALL CONDITIONS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES  
AND/OR CONDITIONS OF SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. The terms of  
this limited warranty do not affect or prejudice your statutory rights as an ultimate consumer, neither do  
they limit or exclude any liability for death or personal injury caused by the negligence of SONY.  
4. Automatic Update Feature. From time to time, SONY may automatically update or otherwise modify the  
SONY SOFTWARE, for example for purposes of enhancement of security functions, error correction and  
improvement of updating functions at such time as you interact with SONY’s or SONY’s designee’s server(s).  
Any such updates/modifications shall be deemed to constitute part of the SONY SOFTWARE for purposes of  
this EULA. By acceptance of this EULA, you consent to such update/modification.  
5. Limitation of Liability. NEITHER SONY NOR ITS THIRD PARTY LICENSORS SHALL BE LIABLE FOR ANY  
INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS  
OR IMPLIED WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER LEGAL  
THEORY RELATED TO THE SONY SOFTWARE OR THE SONY HARDWARE. SUCH DAMAGES INCLUDE, BUT ARE  
NOT LIMITED TO, LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF DATA, LOSS OF USE OF THE PRODUCT OR  
ANY ASSOCIATED EQUIPMENT, DOWN TIME AND PURCHASER’S TIME, EVEN IF SONY OR ITS THIRD PARTY  
LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN ANY CASE, SONY’S AND ITS  
THIRD PARTY LICENSORSENTIRE LIABILITY UNDER ANY PROVISION OF THIS AGREEMENT SHALL BE LIMITED  
TO THE AMOUNT ACTUALLY PAID BY YOU ALLOCABLE TO THE SOFTWARE. SOME JURISDICATIONS DO NOT  
ALLOW THE EXCLUSION OR LIMITATION OF CERTAIN TYPES OF DAMAGES, SO THE ABOVE EXCLUSION OR  
LIMITATION MAY NOT APPLY TO YOU.  
6. Termination. This EULA is effective until terminated. You may terminate this EULA at any time by  
destroying the SONY SOFTWARE, related documentation, and all copies thereof. This EULA will terminate  
immediately without notice from SONY, if you fail to comply with any provision of this EULA. Upon  
termination you must destroy the SONY SOFTWARE, related documentation, and all copies thereof.  
7. Governing Law. This EULA shall be governed by and construed in accordance with the laws of Japan.  
Should you have any questions concerning this EULA or this limited warranty, please refer to the Customer  
Service Guide on how to contact VAIO-Link.  
END USER LICENSE AGREEMENT FOR SONY SOFTWARE (For Customer in U.S.A.)  
YOU SHOULD CAREFULLY READ THE FOLLOWING AGREEMENT BEFORE USING THE SOFTWARE INCLUDED  
WITH THIS PRODUCT. USING THIS SOFTWARE INDICATES YOUR ACCEPTANCE OF THE AGREEMENT.  
IMPORTANT-READ CAREFULLY:  
This End-User License Agreement (“License”) is a legal agreement between you and Sony Electronics Inc.  
(“SONY”), the manufacturer of your Sony device (“DEVICE”). All Sony software and third party software  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
included with your DEVICE , shall be referred to herein as the SOFTWARE. This License covers only the  
SOFTWARE. The SOFTWARE includes DEVICE software, any associated media, any printed materials, and any  
“on-lineor electronic documentation, as well as Sony-supplied or authorized updates/upgrades thereto. By  
installing, copying, downloading or otherwise using the SOFTWARE, you agree to be bound by the terms of  
this License. If you do not agree to the terms of this License, SONY is unwilling to license the SOFTWARE to  
you. In such event, you may not use or copy the SOFTWARE, and you should promptly contact SONY for  
instructions on return of the entire DEVICE and included SOFTWARE for a refund of the purchase price of  
the DEVICE.  
SOFTWARE LICENSE  
The SOFTWARE is protected by copyright laws and international copyright treaties, as well as other  
intellectual property laws and treaties. The SOFTWARE is licensed, not sold.  
GRANT OF LICENSE  
This License grants you right to use the SOFTWARE on the DEVICE solely for its intended purpose. This  
SOFTWARE and the related documentation are licensed to you by SONY. The SOFTWARE is licensed as  
single product and may not be separated for your personal use. You may install and use the SOFTWARE (1)  
on the DEVICE or (2) in conjunction with the DEVICE by (i) downloading the SOFTWARE onto your personal  
computer and (ii) subsequently uploading the SOFTWARE onto the DEVICE by accessing the designated  
SOFTWARE set-up page.  
DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS  
Limitation on Reverse Engineering, Decompilation and Disassembly. You may not modify, reverse engineer,  
decompile, or disassemble the SOFTWARE in whole or in part.  
Use Restriction. The SOFTWARE is considered a single integrated product that may only be used with the  
DEVICE except as specifically described in documentation provided with the SOFTWARE.  
Data Files. The SOFTWARE may create data files automatically for use with the SOFTWARE. Any such data  
files will be deemed as part of the SOFTWARE.  
Rental. You may not rent or lease the SOFTWARE.  
Software Transfer. You may permanently transfer all of your rights under this License only as part of a sale or  
transfer of the DEVICE, provided you retain no copies, transfer all of the SOFTWARE (including all copies,  
component parts, the media and printed materials, all versions and any upgrades of the SOFTWARE and this  
License), and the recipient agrees to the terms of this License.  
Termination. Without prejudice to any other rights, SONY may terminate this License if you fail to comply  
with the terms and conditions of this License. In such event, you must destroy all copies of the SOFTWARE  
and all of its component parts.  
Dependent Software. The software, network services or other products other than the SOFTWARE upon  
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
which the SOFTWARE’s performance depends on might be interrupted or discontinued at the discretion of  
the suppliers (software suppliers, service providers, or Sony). Sony and its suppliers do not warrant that  
those software, network services or other products will continue to be available, or will operate without  
interruption or modification.  
COPYRIGHT  
All title and copyrights in and to the SOFTWARE (including but not limited to any images, photographs,  
animation, video, audio, music, text andapplets,incorporated into the SOFTWARE), and any copies of the  
SOFTWARE, are owned by SONY or its suppliers. All rights not specifically granted under this License are  
reserved by SONY.  
USE OF SOFTWARE WITH COPYRIGHTED MATERIALS  
The SOFTWARE is capable of being used by you to store, process and use content created by you and third  
parties. Such content may be protected by copyright, other intellectual property laws, and/or agreements.  
You agree to use the SOFTWARE only in compliance with all such laws and agreements that apply to such  
content. You agree that SONY may take appropriate measures to protect copyright of content stored,  
processed or used by the SOFTWARE. Such measures include, but are not limited to, counting the  
frequency of your backup and restoration through certain SOFTWARE features, refusal to accept your  
request to enable restoration of data through certain SOFTWARE features and termination of this License in  
the event of your improper use of the SOFTWARE.  
HIGH RISK ACTIVITIES  
The SOFTWARE is not fault-tolerant and is not designed, manufactured or intended for use or resale as on-  
line control equipment in hazardous environments requiring fail-safe performance, such as in the operation  
of nuclear facilities, aircraft navigation or communication systems, air traffic control, direct life support  
machines, or weapons systems, in which the failure of the SOFTWARE could lead directly to death, personal  
injury, or severe physical or environmental damage (“High Risk Activities”). SONY and its suppliers  
specifically disclaim any express or implied warranty of fitness for High Risk Activities.  
PROHIBITION ON EXPORT. EXCEPT FOR EXPORT TO CANADA FOR USE IN CANADA BY CITIZENS OF THE  
UNITED STATES OR CANADA, THE SOFTWARE AND ANY UNDERLYING TECHNOLOGY MAY NOT BE EXPORTED  
OUTSIDE THE UNITED STATES OR TO ANY FOREIGN ENTITY ORFOREIGN PERSONAS DEFINED BY U.S.  
GOVERNMENT REGULATIONS, INCLUDING WITHOUT LIMITATION, ANYONE WHO IS NOT A CITIZEN,  
NATIONAL OR LAWFUL PERMANENT RESIDENT OF THE UNITED STATES. BY USING THE SOFTWARE, YOU ARE  
AGREEING TO THE FOREGOING AND YOU ARE WARRANTING THAT YOU ARE NOT AFOREIGN PERSONOR  
UNDER THE CONTROL OF A FOREIGN PERSON.  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
U.S. GOVERNMENT RESTRICTED RIGHTS  
The SOFTWARE is provided with RESTRICTED RIGHTS. Use, duplication, or disclosure by the United States  
Government is subject to restrictions as set forth in subparagraph (c)(1) and (2) of the Commercial  
Computer Software-Restricted Rights at 48 CFR 52.227-19, as applicable. Manufacturer is Sony Electronics  
Inc., 16530 Via Esprillo, San Diego, CA 92127.  
LIMITED WARRANTY ON MEDIA  
In situations where a back-up copy of the SOFTWARE is furnished on media, SONY warrants that for a period  
of ninety (90) days from the date of its delivery to you the media on which the back-up copy of the  
SOFTWARE is furnished to you will be free from defects in materials and workmanship under normal use.  
This limited warranty extends only to you as the original licensee. SONY’s entire liability and your exclusive  
remedy will be replacement of the media not meeting SONY’s limited warranty and which is returned to  
SONY with proof of purchase in the form of a bill of sale (which is evidence that the media is within the  
warranty period). SONY will have no responsibility to replace a disk damaged by accident, abuse or  
misapplication. ANY IMPLIED WARRANTIES ON THE MEDIA, INCLUDING THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO NINETY (90)  
DAYS FROM THE DATE OF DELIVERY. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN  
IMPLIED WARRANTY LASTS, SO THESE LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU  
SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.  
EXCLUSION OF WARRANTY ON SOFTWARE  
You expressly acknowledge and agree that use of the SOFTWARE is at your sole risk. The SOFTWARE is  
providedAS ISand without warranty of any kind and SONY and SONY’s licensors (In this Section, SONY and  
SONY’s licensors shall be collectively referred to asSONY”) EXPRESSLY DISCLAIM ALL WARRANTIES, EXPRESS  
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT,  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SONY DOES NOT WARRANT THAT THE  
FUNCTIONS CONTAINED IN THE SOFTWARE WILL MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF  
THE SOFTWARE WILL BE ERROR FREE. FURTHERMORE, SONY DOES NOT WARRANT OR MAKE ANY  
REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE OF THE SOFTWARE IN TERMS OF ITS  
CORRECTNESS, ACCURACY, RELIABILITY, OR OTHERWISE. NO ORAL OR WRITTEN INFORMATION OR ADVICE  
GIVEN BY SONY OR A SONY AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY OR IN ANY WAY  
INCREASE THE SCOPE OF THIS WARRANTY. SHOULD THE SOFTWARE PROVE DEFECTIVE. YOU (AND NOT  
SONY OR A SONY AUTHORIZED REPRESENTATIVE) ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING,  
REPAIR OR CORRECTION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES,  
SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU.  
Without limiting the foregoing, you specifically acknowledge that the SOFTWARE is not designed or  
intended for use on a DEVICE other than the DEVICE. You expressly understand that any other DEVICE  
hardware, software or data could be damaged by the installing or using the SOFTWARE on such other  
DEVICE and that SONY is not responsible for any such damage. You expressly acknowledge and agree that  
all use of the SOFTWARE is at your sole risk and you are solely responsible for installation of the SOFTWARE  
and use of the SOFTWARE on your DEVICE.  
80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITATION OF LIABILITY  
IN THIS SECTION, SONY AND SONY’S LICENSOR’S SHALL BE COLLECTIVELY REFERRED TO ASSONY.SONY  
SHALL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES  
FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT  
LIABILITY OR ANY OTHER LEGAL THEORY RELATED TO THE SOFTWARE OR THIS DEVICE. SUCH DAMAGES  
INCLUDE, BUT ARE NOT LIMITED TO, LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF DATA, LOSS OF USE OF  
THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, DOWN TIME AND PURCHASER’S TIME, EVEN IF SONY HAS  
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN ANY CASE, SONY’S ENTIRE LIABILITY UNDER ANY  
PROVISION OF THIS LICENSE SHALL BE LIMITED TO THE AMOUNT ACTUALLY PAID BY YOU ALLOCABLE TO  
THE SOFTWARE. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF CERTAIN TYPES OF  
DAMAGES, SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU.  
SOFTWARE DATA COLLECTION AND MONITORING  
The SOFTWARE contains features which may allow SONY and/or third parties to collect data from, control  
and/or monitor the DEVICE and other devices running or interacting with the SOFTWARE. You hereby  
consent to such activities. SONY’s current privacy policy is located at http://products.sel.sony.com/SEL/  
legal/privacy.pdf. Please contact applicable third parties for privacy policies related to their software and  
services.  
AUTOMATIC UPDATE FEATURE  
From time to time, SONY or third parties may automatically update or otherwise modify the SOFTWARE, for  
example, but not limited to, for purposes of enhancement of security functions, error correction and  
improvement of functions. Such updates or modifications may delete or change the nature of features or  
other aspects of the SOFTWARE, including functions you may rely upon. You hereby agree that such  
activities may occur at SONY’s sole discretion and that SONY may condition continued use of the  
SOFTWARE upon your complete installation or acceptance of such update or modifications.  
GOVERNING LAW AND JURISDICTION, JURY TRIAL WAIVER  
This License shall be governed by the laws of the State of California, United States of America, without  
regards to conflict of laws provisions. Any dispute arising out of this License shall be subject to the exclusive  
venue of the state and federal courts of San Diego County, California, and the parties hereby consent to the  
venue and jurisdiction of such courts. THE PARTIES HERETO WAIVE TRIAL BY JURY WITH RESPECT TO ANY  
MATTERS ARISING UNDER OR RELATING TO THIS LICENSE.  
SEVERABILITY  
If any part of this License is held invalid or unenforceable, the other parts will remain valid.  
81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
THIRD PARTY BENEFICIARY  
For all purposes of this License, each of Sony’s third party licensors of any of the SOFTWARE shall be  
expressly deemed an intended third party beneficiary of this License and shall have the right to enforce the  
terms and conditions of this License.  
Should you have any questions concerning this license or this limited warranty, you may contact SONY by  
writing to SONY at Sony Technical Response Center, 12451 Gateway Boulevard, Fort Myers, Florida 33913.  
GNU GPL/LGPL applied software  
This product contains software that is subject to the following GNU General Public License (“GPL) or GNU  
Lesser General Public License (“LGPL). These establish that customers have the right to acquire, modify, and  
redistribute the source code of said software in accordance with the terms of the GPL or the LGPL.  
Package List  
nandboot  
linux-kernel  
wireless_tools  
busybox  
ysdev  
zlib  
ncurses  
e2fsprogs  
device-mapper  
dosfstools  
mtd  
glibc  
directFB  
mtrace  
perl  
gdb  
madplay  
samba  
uuennode  
The source code for the above-listed software is available on the Web.  
To download, please access the following URL:  
http://www.sony.net/Products/Linux  
Please note that Sony cannot answer or respond to any inquiries regarding the content of this source code.  
8ꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GNU GENERAL PUBLIC LICENSE  
Version 2, June 1991  
Copyright (C) 1989, 1991 Free Software Foundation, Inc.  
59 Temple Place - Suite 330, Boston, MA 02111-1307, USA  
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.  
Preamble  
The Licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU  
General Public License is intended to guarantee your freedom to share and change free software--to make sure the  
software is free for all its users. This General Public License applies to most of the Free Software Foundation’s software and  
to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the  
GNU Lesser General Public License instead.) You can apply it to your programs, too.  
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make  
sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you  
receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs;  
and that you know you can do these things.  
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender  
the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you  
modify it.  
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the  
rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them  
these terms so they know their rights.  
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal  
permission to copy, distribute and/or modify the software.  
Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no warranty  
for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what  
they have is not the original, so that any problems introduced by others will not reflect on the original authorsreputations.  
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a  
free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have  
made it clear that any patent must be licensed for everyone’s free use or not licensed at all.  
The precise terms and conditions for copying, distribution and modification follow.  
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION  
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it  
may be distributed under the terms of this General Public License. TheProgram, below, refers to any such program or  
work, and awork based on the Programmeans either the Program or any derivative work under copyright law: that is  
to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into  
another language. (Hereinafter, translation is included without limitation in the termmodification.) Each licensee is  
addressed asyou.  
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The  
act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a  
work based on the Program (independent of having been made by running the Program). Whether that is true depends on  
what the Program does.  
83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided  
that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of  
warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other  
recipients of the Program a copy of this License along with the Program.  
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in  
exchange for a fee.  
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program,  
and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet  
all of these conditions:  
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any  
change.  
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the  
Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this  
License.  
c) If the modified program normally reads commands interactively when run, you must cause it, when started  
running for such interactive use in the most ordinary way, to print or display an announcement including an  
appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty)  
and that users may redistribute the program under these conditions, and telling the user how to view a copy of  
this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your  
work based on the Program is not required to print an announcement.)  
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the  
Program, and can be reasonably considered independent and separate works in themselves, then this License, and its  
terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same  
sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of  
this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless  
of who wrote it.  
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the  
intent is to exercise the right to control the distribution of derivative or collective works based on the Program.  
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the  
Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.  
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form  
under the terms of Sections 1 and 2 above provided that you also do one of the following:  
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under  
the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,  
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than  
your cost of physically performing source distribution, a complete machine-readable copy of the corresponding  
source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for  
software interchange; or,  
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This  
alternative is allowed only for noncommercial distribution and only if you received the program in object code or  
executable form with such an offer, in accord with Subsection b above.)  
The source code for a work means the preferred form of the work for making modifications to it. For an executable work,  
complete source code means all the source code for all modules it contains, plus any associated interface definition files,  
plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source  
code distributed need not include anything that is normally distributed (in either source or binary form) with the major  
components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component  
itself accompanies the executable.  
If distribution of executable or object code is made by offering access to copy from a designated place, then offering  
equivalent access to copy the source code from the same place counts as distribution of the source code, even though  
8ꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
third parties are not compelled to copy the source along with the object code.  
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any  
attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your  
rights under this License. However, parties who have received copies, or rights, from you under this License will not  
have their licenses terminated so long as such parties remain in full compliance.  
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission  
to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept  
this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate  
your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the  
Program or works based on it.  
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a  
license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You  
may not impose any further restrictions on the recipientsexercise of the rights granted herein. You are not responsible  
for enforcing compliance by third parties to this License.  
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to  
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the  
conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to  
satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence  
you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution  
of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy  
both it and this License would be to refrain entirely from distribution of the Program.  
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section  
is intended to apply and the section as a whole is intended to apply in other circumstances.  
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest  
validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution  
system, which is implemented by public license practices. Many people have made generous contributions to the wide  
range of software distributed through that system in reliance on consistent application of that system; it is up to the  
author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot  
impose that choice.  
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.  
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted  
interfaces, the original copyright holder who places the Program under this License may add an explicit geographical  
distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus  
excluded. In such case, this License incorporates the limitation as if written in the body of this License.  
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to  
time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems  
or concerns.  
Each version is given a distinguishing version number. If the Program specifies a version number of this License which  
applies to it andany later version, you have the option of following the terms and conditions either of that version or of  
any later version published by the Free Software Foundation. If the Program does not specify a version number of this  
License, you may choose any version ever published by the Free Software Foundation.  
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different,  
write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to  
the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of  
preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software  
generally.  
8ꢂ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NO WARRANTY  
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT  
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR  
OTHER PARTIES PROVIDE THE PROGRAMAS ISWITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,  
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE  
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.  
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR  
ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU  
FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE  
USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED  
INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH  
ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH  
DAMAGES.  
END OF TERMS AND CONDITIONS  
How to Apply These Terms to Your New Programs  
If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this  
is to make it free software which everyone can redistribute and change under these terms.  
To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most  
effectively convey the exclusion of warranty; and each file should have at least thecopyrightline and a pointer to where  
the full notice is found.  
<one line to give the program’s name and an idea of what it does.>  
Copyright (C) <year> <name of author>  
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as  
published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.  
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied  
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more  
details.  
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free  
Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
Also add information on how to contact you by electronic and paper mail.  
If the program is interactive, make it output a short notice like this when it starts in an interactive mode:  
Gnomovision version 69, Copyright (C) year name of author  
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details  
type `show w. This is free software, and you are welcome to redistribute it under certain conditions; type `show cfor  
details.  
The hypothetical commands `show wand `show cshould show the appropriate parts of the General Public License. Of  
course, the commands you use may be called something other than `show wand `show c’; they could even be mouse-  
clicks or menu items--whatever suits your program.  
You should also get your employer (if you work as a programmer) or your school, if any, to sign acopyright disclaimerfor  
the program, if necessary. Here is a sample; alter the names:  
86  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Yoyodyne, Inc., hereby disclaims all copyright  
interest in the program `Gnomovision’  
(which makes passes at compilers) written  
by James Hacker.  
<signature of Ty Coon>, 1 April 1989  
Ty Coon, President of Vice  
This General Public License does not permit incorporating your program into proprietary programs. If your program is a  
subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what  
you want to do, use the GNU Lesser General Public License instead of this License.  
GNU LESSER GENERAL PUBLIC LICENSE  
Version 2.1, February 1999  
Copyright (C) 1991, 1999 Free Software Foundation, Inc.  
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of  
this license document, but changing it is not allowed.  
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version  
2, hence the version number 2.1.]  
Preamble  
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU  
General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the  
software is free for all its users.  
This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries--  
of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think  
carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular  
case, based on the explanations below.  
When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to  
make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish); that you  
receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs;  
and that you are informed that you can do these things.  
To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to  
surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or  
if you modify it.  
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that  
we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library,  
you must provide complete object files to the recipients, so that they can relink them with the library after making changes  
to the library and recompiling it. And you must show them these terms so they know their rights.  
We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives  
you legal permission to copy, distribute and/or modify the library.  
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is  
modified by someone else and passed on, the recipients should know that what they have is not the original version, so  
that the original author’s reputation will not be affected by problems that might be introduced by others.  
Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company  
87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we  
insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified  
in this license.  
Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU  
Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public  
License. We use this license for certain libraries in order to permit linking those libraries into non-free programs.  
When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally  
speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such  
linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria  
for linking other code with the library.  
We call this license theLesserGeneral Public License because it does Less to protect the user’s freedom than the ordinary  
General Public License. It also provides other free software developers Less of an advantage over competing non-free  
programs. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the  
Lesser license provides advantages in certain special circumstances.  
For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so  
that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent  
case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting  
the free library to free software only, so we use the Lesser General Public License.  
In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a  
large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more  
people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system.  
Although the Lesser General Public License is Less protective of the usersfreedom, it does ensure that the user of a  
program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version  
of the Library.  
The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference  
between awork based on the libraryand awork that uses the library. The former contains code derived from the library,  
whereas the latter must be combined with the library in order to run.  
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION  
0. This License Agreement applies to any software library or other program which contains a notice placed by the  
copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public  
License (also calledthis License”). Each licensee is addressed asyou.  
Alibrarymeans a collection of software functions and/or data prepared so as to be conveniently linked with application  
programs (which use some of those functions and data) to form executables.  
TheLibrary, below, refers to any such software library or work which has been distributed under these terms. Awork  
based on the Librarymeans either the Library or any derivative work under copyright law: that is to say, a work containing  
the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another  
language. (Hereinafter, translation is included without limitation in the termmodification.)  
“Source codefor a work means the preferred form of the work for making modifications to it. For a library, complete source  
code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts  
used to control compilation and installation of the library.  
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The  
act of running a program using the Library is not restricted, and output from such a program is covered only if its contents  
constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true  
depends on what the Library does and what the program that uses the Library does.  
88  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. You may copy and distribute verbatim copies of the Library’s complete source code as you receive it, in any medium,  
provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and  
disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and  
distribute a copy of this License along with the Library.  
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in  
exchange for a fee.  
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and  
copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of  
these conditions:  
a) The modified work must itself be a software library.  
b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any  
change.  
c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this  
License.  
d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program  
that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good  
faith effort to ensure that, in the event an application does not supply such function or table, the facility still  
operates, and performs whatever part of its purpose remains meaningful.  
(For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent  
of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this  
function must be optional: if the application does not supply it, the square root function must still compute square  
roots.)  
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from  
the Library, and can be reasonably considered independent and separate works in themselves, then this License, and  
its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the  
same sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the  
terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every  
part regardless of who wrote it.  
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the  
intent is to exercise the right to control the distribution of derivative or collective works based on the Library.  
In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the  
Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.  
3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of  
the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU  
General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU  
General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other  
change in these notices.  
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies  
to all subsequent copies and derivative works made from that copy.  
This option is useful when you wish to copy part of the code of the Library into a program that is not a library.  
4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable  
form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding  
machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium  
customarily used for software interchange.  
If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to  
89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
copy the source code from the same place satisfies the requirement to distribute the source code, even though third  
parties are not compelled to copy the source along with the object code.  
5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being  
compiled or linked with it, is called awork that uses the Library. Such a work, in isolation, is not a derivative work of  
the Library, and therefore falls outside the scope of this License.  
However, linking awork that uses the Librarywith the Library creates an executable that is a derivative of the Library  
(because it contains portions of the Library), rather than awork that uses the library. The executable is therefore covered  
by this License. Section 6 states terms for distribution of such executables.  
When awork that uses the Libraryuses material from a header file that is part of the Library, the object code for the work  
may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if  
the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely  
defined by law.  
If such an object file uses only numerical parameters, data structure layouts and assessors, and small macros and small  
inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a  
derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.)  
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of  
Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the  
Library itself.  
6. As an exception to the Sections above, you may also combine or link awork that uses the Librarywith the Library to  
produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that  
the terms permit modification of the work for the customer’s own use and reverse engineering for debugging such  
modifications.  
You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are  
covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices,  
you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of  
this License. Also, you must do one of these things:  
a) Accompany the work with the complete corresponding machine-readable source code for the Library including  
whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is  
an executable linked with the Library, with the complete machine-readablework that uses the Library, as object code  
and/or source code, so that the user can modify the Library and then relink to produce a modified executable  
containing the modified Library. (It is understood that the user who changes the contents of definitions files in the  
Library will not necessarily be able to recompile the application to use the modified definitions.)  
b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run  
time a copy of the library already present on the user’s computer system, rather than copying library functions into the  
executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the  
modified version is interface-compatible with the version that the work was made with.  
c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in  
Subsection 6a, above, for a charge no more than the cost of performing this distribution.  
d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy  
the above specified materials from the same place.  
e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.  
For an executable, the required form of thework that uses the Librarymust include any data and utility programs needed  
for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include  
anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so  
on) of the operating system on which the executable runs, unless that component itself accompanies the executable.  
It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally  
accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an  
90  
Download from Www.Somanuals.com. All Manuals Search And Download.  
executable that you distribute.  
7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other  
library facilities not covered by this License, and distribute such a combined library, provided that the separate  
distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided  
that you do these two things:  
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other  
library facilities. This must be distributed under the terms of the Sections above.  
b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and  
explaining where to find the accompanying uncombined form of the same work.  
8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this  
License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will  
automatically terminate your rights under this License. However, parties who have received copies, or rights, from you  
under this License will not have their licenses terminated so long as such parties remain in full compliance.  
9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission  
to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this  
License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your  
acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library  
or works based on it.  
10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license  
from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You  
may not impose any further restrictions on the recipientsexercise of the rights granted herein. You are not responsible  
for enforcing compliance by third parties with this License.  
11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to  
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the  
conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to  
satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence  
you may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of  
the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both  
it and this License would be to refrain entirely from distribution of the Library.  
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section  
is intended to apply, and the section as a whole is intended to apply in other circumstances.  
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest  
validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution  
system which is implemented by public license practices. Many people have made generous contributions to the wide  
range of software distributed through that system in reliance on consistent application of that system; it is up to the  
author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot  
impose that choice.  
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.  
12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted  
interfaces, the original copyright holder who places the Library under this License may add an explicit geographical  
distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus  
excluded. In such case, this License incorporates the limitation as if written in the body of this License.  
13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time  
to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new  
problems or concerns.  
Each version is given a distinguishing version number. If the Library specifies a version number of this License which  
91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
applies to it andany later version, you have the option of following the terms and conditions either of that version or of  
any later version published by the Free Software Foundation. If the Library does not specify a license version number, you  
may choose any version ever published by the Free Software Foundation.  
14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible  
with these, write to the author to ask for permission. For software which is copyrighted by the Free Software  
Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be  
guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the  
sharing and reuse of software generally.  
NO WARRANTY  
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT  
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR  
OTHER PARTIES PROVIDE THE LIBRARYAS ISWITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,  
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE  
LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.  
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR  
ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU  
FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE  
USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED  
INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY  
OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH  
DAMAGES.  
END OF TERMS AND CONDITIONS  
How to Apply These Terms to Your New Libraries  
If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free  
software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or,  
alternatively, under the terms of the ordinary General Public License).  
To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to  
most effectively convey the exclusion of warranty; and each file should have at least thecopyrightline and a pointer to  
where the full notice is found.  
<one line to give the library’s name and an idea of what it does.>  
Copyright (C) <year> <name of author>  
This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public  
License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version.  
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied  
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for  
more details.  
You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free  
Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA  
Also add information on how to contact you by electronic and paper mail.  
You should also get your employer (if you work as a programmer) or your school, if any, to sign acopyright disclaimerfor  
the library, if necessary. Here is a sample; alter the names:  
9ꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob(a library for tweaking knobs) written by James  
Random Hacker.  
signature of Ty Coon, 1 April 1990  
Ty Coon, President of Vice  
That’s all there is to it!  
NetBSD software  
Copyright (c) 1994-2004 The NetBSD Foundation, Inc. All rights reserved.  
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following  
conditions are met:  
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following  
disclaimer.  
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following  
disclaimer in the documentation and/or other materials provided with the distribution.  
3. All advertising materials mentioning features or use of this software must display the following acknowledgement:  
This product includes software developed by the NetBSD Foundation, Inc. and its contributors.  
4. Neither the name of The NetBSD Foundation nor the names of its contributors may be used to endorse or promote  
products derived from this software without specific prior written permission.  
THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS’AND ANY EXPRESS OR IMPLIED WARRANTIES,  
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,  
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF  
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND  
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR  
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH  
DAMAGE.  
The following notices are required to satisfy the license terms of the software that we have mentioned in this document:  
This product includes software developed by Adam Glass.  
This product includes software developed by Bill Paul.  
This product includes software developed by Charles M. Hannum.  
This product includes software developed by Christian E. Hopps.  
This product includes software developed by Christopher G. Demetriou.  
This product includes software developed by Christopher G. Demetriou for the NetBSD Project.  
This product includes software developed by Christos Zoulas.  
This product includes software developed by Gardner Buchanan.  
This product includes software developed by Gordon W. Ross  
This product includes software developed by Manuel Bouyer.  
This product includes software developed by Rolf Grossmann.  
This product includes software developed by TooLs GmbH.  
This product includes software developed by the NetBSD Foundation, Inc. and its contributors.  
This product includes software developed by the University of California, Berkeley and its contributors.  
This product includes software developed by the University of California, Lawrence Berkeley Laboratory and its  
contributors.  
This product includes software developed by the University of California, Lawrence Berkeley Laboratory.  
This product includes software developed for the NetBSD Project by Wasabi Systems, Inc.  
This product includes software developed for the NetBSD Project by Matthias Drochner.  
93  
Download from Www.Somanuals.com. All Manuals Search And Download.  
This product includes software developed under OpenBSD by Per Fogelstrom Opsycon AB for RTMX Inc, North Carolina,  
USA.  
OpenSSL software  
This product is equipped with the softwareOpen SSLincluding the library calledOriginal SSLeaythat our company uses  
based on licensing agreement with a copyright holder. Based on the demand of the copyright holder of this software, our  
company has the duty to notify the customer of the following contents. Please read the following notices.  
OpenSSL License  
Copyright (c) 1998-2007 The OpenSSL Project. All rights reserved.  
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following  
conditions are met:  
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following  
disclaimer.  
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following  
disclaimer in the documentation and/or other materials provided with the distribution.  
3. All advertising materials mentioning features or use of this software must display the following acknowledgment:This  
product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.  
org/)”  
4. The namesOpenSSL ToolkitandOpenSSL Projectmust not be used to endorse or promote products derived from  
this software without prior written permission. For written permission, please contact [email protected].  
5. Products derived from this software may not be calledOpenSSLnor mayOpenSSLappear in their names without  
prior written permission of the OpenSSL Project.  
6. Redistributions of any form whatsoever must retain the following acknowledgment:  
“This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.  
openssl.org/)”  
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS’AND ANY EXPRESSED OR IMPLIED WARRANTIES,  
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT,  
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,  
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)  
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING  
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE  
POSSIBILITY OF SUCH DAMAGE.  
This product includes cryptographic software written by Eric Young ([email protected]). This product includes software  
written by Tim Hudson ([email protected]).  
Original SSLeay License  
Copyright (C) 1995-1998 Eric Young ([email protected]) All rights reserved.  
This package is an SSL implementation written by Eric Young ([email protected]). The implementation was written so as  
to conform with Netscapes SSL.  
9ꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The  
following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL  
code. The SSL documentation included with this distribution is covered by the same copyright terms except that the  
holder is Tim Hudson ([email protected]).  
Copyright remains Eric Young’s, and as such any Copyright notices in the code are not to be removed.  
If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used.  
This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the  
package.  
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following  
conditions are met:  
1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.  
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following  
disclaimer in the documentation and/or other materials provided with the distribution.  
3. All advertising materials mentioning features or use of this software must display the following acknowledgement:  
“This product includes cryptographic software written by Eric Young ([email protected])”  
The wordcryptographiccan be left out if the rouines from the library being used are not cryptographic related :-).  
4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must  
include an acknowledgement:  
“This product includes software written by Tim Hudson ([email protected])”  
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS’AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT  
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  
IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,  
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS  
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF  
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY  
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this  
code cannot simply be copied and put under another distribution licence  
[including the GNU Public Licence.]  
AES  
Copyright (c) 2003, Dr Brian Gladman, Worcester, UK. All rights reserved.  
LICENSE TERMS  
The free distribution and use of this software in both source and binary form is allowed (with or without changes) provided  
that:  
1. distributions of this source code include the above copyright notice, this list of conditions and the following  
disclaimer;  
2. distributions in binary form include the above copyright notice, this list of conditions and the following disclaimer in  
the documentation and/or other associated materials;  
3. the copyright holder’s name is not used to endorse products built using this software without specific written  
permission.  
9ꢂ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ALTERNATIVELY, provided that this notice is retained in full, this product may be distributed under the terms of the GNU  
General Public License (GPL), in which case the provisions of the GPL apply INSTEAD OF those given above.  
DISCLAIMER  
This software is providedas iswith no explicit or implied warranties in respect of its properties, including, but not limited  
to, correctness and/or fitness for purpose.  
MD5  
md5.c  
RSA Data Security, Inc. MD5 Message Digest Algorithm  
Created: 2/17/90 RLR  
Revised: 1/91 SRD,AJ,BSK,JT Reference C Version  
Copyright (C) 1990, RSA Data Security, Inc. All rights reserved.  
License to copy and use this software is granted provided that it is identified as theRSA Data Security, Inc. MD5 Message  
Digest Algorithmin all material mentioning or referencing this software or this function.  
License is also granted to make and use derivative works provided that such works are identified asderived from the RSA  
Data Security, Inc. MD5 Message Digest Algorithmin all material mentioning or referencing the derived work.  
RSA Data Security, Inc. makes no representations concerning either the merchantability of this software or the suitability of  
this software for any particular purpose. It is providedas iswithout express or implied warranty of any kind.  
These notices must be retained in any copies of any part of this documentation and/or software.  
JPEG  
The research result of Independent JPEG GROUP is used to a part of this product.  
In plain English:  
1. We don’t promise that this software works. (But if you find any bugs, please let us know!)  
2. You can use this software for whatever you want. You don’t have to pay us.  
3. You may not pretend that you wrote this software. If you use it in a program, you must acknowledge somewhere in  
your documentation that you’ve used the IJG code.  
In legalese:  
The authors make NO WARRANTY or representation, either express or implied, with respect to this software, its quality,  
accuracy, merchantability, or fitness for a particular purpose. This software is providedAS IS, and you, its user assume the  
entire risk as to its quality and accuracy.  
This software is copyright (c) 1991-1998, Thomas G. Lane.  
All Rights Reserved except as specified below.  
Permission is hereby granted to use, copy, modify, and distribute this software (or portions thereof) for any purpose,  
without fee, subject to these conditions:  
(1) If any part of the source code for this software is distributed, then this README file must be included, with this  
copyright and no-warranty notice unaltered; and any additions, deletions, or changes to the original files must be  
clearly indicated in accompanying documentation.  
(2) If only executable code is distributed, then the accompanying documentation must state thatthis software is based  
in part on the work of the Independent JPEG Group.  
96  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(3) Permission for use of this software is granted only if the user accepts full responsibility for any undesirable  
consequences; the authors accept NO LIABILITY for damages of any kind.  
These conditions apply to any software derived from or based on the IJG code, not just to the unmodified library. If you use  
our work, you ought to acknowledge us.  
Permission is NOT granted for the use of any IJG author’s name or company name in advertising or publicity relating to this  
software or products derived from it. This software may be referred to only asthe Independent JPEG Group’s software.  
We specifically permit and encourage the use of this software as the basis of commercial products, provided that all  
warranty or liability claims are assumed by the product vendor.  
fdlibm software  
@(#)fdlibm.h 1.5 95/01/18  
Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.  
Developed at SunSoft, a Sun Microsystems, Inc. business.  
Permission to use, copy, modify, and distribute this software is freely  
granted,provided that this notice is preserved.  
MOZILLA PUBLIC LICENSE Version 1.1  
1. Definitions.  
1.0.1. “Commercial Usemeans distribution or otherwise making the Covered Code available to a third party.  
1.1.  
1.2.  
“Contributormeans each entity that creates or contributes to the creation of Modifications.  
“Contributor Versionmeans the combination of the Original Code, prior Modifications used by a Contributor,  
and the Modifications made by that particular Contributor.  
1.3.  
1.4.  
“Covered Codemeans the Original Code or Modifications or the combination of the Original Code and  
Modifications, in each case including portions thereof.  
“Electronic Distribution Mechanismmeans a mechanism generally accepted in the software development  
community for the electronic transfer of data.  
1.5.  
1.6.  
“Executablemeans Covered Code in any form other than Source Code.  
“Initial Developermeans the individual or entity identified as the Initial Developer in the Source Code notice  
required by Exhibit A.  
1.7.  
“Larger Workmeans a work which combines Covered Code or portions thereof with code not governed by the  
terms of this License.  
1.8.  
“Licensemeans this document.  
1.8.1. “Licensablemeans having the right to grant, to the maximum extent possible, whether at the time of the  
initial grant or subsequently acquired, any and all of the rights conveyed herein.  
1.9.  
“Modificationsmeans any addition to or deletion from the substance or structure of either the Original Code  
or any previous Modifications. When Covered Code is released as a series of files, a Modification is:  
A. Any addition to or deletion from the contents of a file containing Original Code or previous Modifications.  
B. Any new file that contains any part of the Original Code or previous Modifications.  
1.10. “Original Codemeans Source Code of computer software code which is described in the Source Code notice  
required by Exhibit A as Original Code, and which, at the time of its release under this License is not already  
Covered Code governed by this License.  
1.10.1. “Patent Claimsmeans any patent claim(s), now owned or hereafter acquired, including without limitation,  
method, process, and apparatus claims, in any patent Licensable by grantor.  
1.11. “Source Codemeans the preferred form of the Covered Code for making modifications to it, including all  
modules it contains, plus any associated interface definition files, scripts used to control compilation and  
installation of an Executable, or source code differential comparisons against either the Original Code or  
another well known, available Covered Code of the Contributor’s choice. The Source Code can be in a  
97  
Download from Www.Somanuals.com. All Manuals Search And Download.  
compressed or archival form, provided the appropriate decompression or de-archiving software is widely  
available for no charge.  
1.12. “You(orYour”) means an individual or a legal entity exercising rights under, and complying with all of the  
terms of, this License or a future version of this License issued under Section 6.1. For legal entities, “You”  
includes any entity which controls, is controlled by, or is under common control with You. For purposes of this  
definition, “controlmeans (a) the power, direct or indirect, to cause the direction or management of such  
entity, whether by contract or otherwise, or (b) ownership of more than fifty percent (50%) of the outstanding  
shares or beneficial ownership of such entity.  
2. Source Code License.  
2.1.  
The Initial Developer Grant.  
The Initial Developer hereby grants You a world-wide, royalty-free, non-exclusive license, subject to third party  
intellectual property claims:  
(a) under intellectual property rights (other than patent or trademark) Licensable by Initial Developer to use,  
reproduce, modify, display, perform, sublicense and distribute the Original Code (or portions thereof) with  
or without Modifications, and/or as part of a Larger Work; and  
(b) under Patents Claims infringed by the making, using or selling of Original Code, to make, have made, use,  
practice, sell, and offer for sale, and/or otherwise dispose of the Original Code (or portions thereof).  
(c) the licenses granted in this Section 2.1(a) and (b) are effective on the date Initial Developer first distributes  
Original Code under the terms of this License.  
(d) Notwithstanding Section 2.1(b) above, no patent license is granted: 1) for code that You delete from the  
Original Code; 2) separate from the Original Code; or 3) for infringements caused by: i) the modification  
of the Original Code or ii) the combination of the Original Code with other software or devices.  
Contributor Grant.  
2.2.  
Subject to third party intellectual property claims, each Contributor hereby grants You a world-wide, royalty-  
free, non-exclusive license  
(a) under intellectual property rights (other than patent or trademark) Licensable by Contributor, to use,  
reproduce, modify, display, perform, sublicense and distribute the Modifications created by such  
Contributor (or portions thereof) either on an unmodified basis, with other Modifications, as Covered  
Code and/or as part of a Larger Work; and  
(b) under Patent Claims infringed by the making, using, or selling of Modifications made by that Contributor  
either alone and/or in combination with its Contributor Version (or portions of such combination), to  
make, use, sell, offer for sale, have made, and/or otherwise dispose of: 1) Modifications made by that  
Contributor (or portions thereof); and 2) the combination of Modifications made by that Contributor with  
its Contributor Version (or portions of such combination).  
(c) the licenses granted in Sections 2.2(a) and 2.2(b) are effective on the date Contributor first makes  
Commercial Use of the Covered Code.  
(d) Notwithstanding Section 2.2(b) above, no patent license is granted: 1) for any code that Contributor has  
deleted from the Contributor Version; 2) separate from the Contributor Version; 3) for infringements  
caused by: i) third party modifications of Contributor Version or ii) the combination of Modifications  
made by that Contributor with other software (except as part of the Contributor Version) or other  
devices; or 4) under Patent Claims infringed by Covered Code in the absence of Modifications made by  
that Contributor.  
3. Distribution Obligations.  
3.1.  
Application of License.  
The Modifications which You create or to which You contribute are governed by the terms of this License,  
including without limitation Section 2.2. The Source Code version of Covered Code may be distributed only  
under the terms of this License or a future version of this License released under Section 6.1, and You must  
include a copy of this License with every copy of the Source Code You distribute. You may not offer or impose  
any terms on any Source Code version that alters or restricts the applicable version of this License or the  
recipientsrights hereunder. However, You may include an additional document offering the additional rights  
described in Section 3.5.  
3.2.  
Availability of Source Code.  
Any Modification which You create or to which You contribute must be made available in Source Code form  
under the terms of this License either on the same media as an Executable version or via an accepted  
Electronic Distribution Mechanism to anyone to whom you made an Executable version available; and if made  
available via Electronic Distribution Mechanism, must remain available for at least twelve (12) months after the  
date it initially became available, or at least six (6) months after a subsequent version of that particular  
98  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Modification has been made available to such recipients. You are responsible for ensuring that the Source  
Code version remains available even if the Electronic Distribution Mechanism is maintained by a third party.  
Description of Modifications.  
You must cause all Covered Code to which You contribute to contain a file documenting the changes You  
made to create that Covered Code and the date of any change. You must include a prominent statement that  
the Modification is derived, directly or indirectly, from Original Code provided by the Initial Developer and  
including the name of the Initial Developer in (a) the Source Code, and (b) in any notice in an Executable  
version or related documentation in which You describe the origin or ownership of the Covered Code.  
Intellectual Property Matters  
3.3.  
3.4.  
(a) Third Party Claims.  
If Contributor has knowledge that a license under a third party’s intellectual property rights is required to  
exercise the rights granted by such Contributor under Sections 2.1 or 2.2, Contributor must include a text  
file with the Source Code distribution titledLEGALwhich describes the claim and the party making the  
claim in sufficient detail that a recipient will know whom to contact. If Contributor obtains such  
knowledge after the Modification is made available as described in Section 3.2, Contributor shall promptly  
modify the LEGAL file in all copies Contributor makes available thereafter and shall take other steps (such  
as notifying appropriate mailing lists or newsgroups) reasonably calculated to inform those who received  
the Covered Code that new knowledge has been obtained.  
(b) Contributor APIs.  
If Contributor’s Modifications include an application programming interface and Contributor has  
knowledge of patent licenses which are reasonably necessary to implement that API, Contributor must  
also include this information in the LEGAL file.  
(c) Representations.  
Contributor represents that, except as disclosed pursuant to Section 3.4(a) above, Contributor believes  
that Contributor’s Modifications are Contributor’s original creation(s) and/or Contributor has sufficient  
rights to grant the rights conveyed by this License.  
3.5.  
Required Notices.  
You must duplicate the notice in Exhibit A in each file of the Source Code. If it is not possible to put such  
notice in a particular Source Code file due to its structure, then You must include such notice in a location  
(such as a relevant directory) where a user would be likely to look for such a notice. If You created one or more  
Modification(s) You may add your name as a Contributor to the notice described in Exhibit A. You must also  
duplicate this License in any documentation for the Source Code where You describe recipientsrights or  
ownership rights relating to Covered Code. You may choose to offer, and to charge a fee for, warranty, support,  
indemnity or liability obligations to one or more recipients of Covered Code. However, You may do so only on  
Your own behalf, and not on behalf of the Initial Developer or any Contributor. You must make it absolutely  
clear than any such warranty, support, indemnity or liability obligation is offered by You alone, and You hereby  
agree to indemnify the Initial Developer and every Contributor for any liability incurred by the Initial Developer  
or such Contributor as a result of warranty, support, indemnity or liability terms You offer.  
Distribution of Executable Versions.  
3.6.  
You may distribute Covered Code in Executable form only if the requirements of Section 3.1-3.5 have been met  
for that Covered Code, and if You include a notice stating that the Source Code version of the Covered Code is  
available under the terms of this License, including a description of how and where You have fulfilled the  
obligations of Section 3.2. The notice must be conspicuously included in any notice in an Executable version,  
related documentation or collateral in which You describe recipientsrights relating to the Covered Code. You  
may distribute the Executable version of Covered Code or ownership rights under a license of Your choice,  
which may contain terms different from this License, provided that You are in compliance with the terms of  
this License and that the license for the Executable version does not attempt to limit or alter the recipient’s  
rights in the Source Code version from the rights set forth in this License. If You distribute the Executable  
version under a different license You must make it absolutely clear that any terms which differ from this License  
are offered by You alone, not by the Initial Developer or any Contributor. You hereby agree to indemnify the  
Initial Developer and every Contributor for any liability incurred by the Initial Developer or such Contributor as  
a result of any such terms You offer.  
3.7.  
Larger Works.  
You may create a Larger Work by combining Covered Code with other code not governed by the terms of this  
License and distribute the Larger Work as a single product. In such a case, You must make sure the  
requirements of this License are fulfilled for the Covered Code.  
99  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Inability to Comply Due to Statute or Regulation.  
If it is impossible for You to comply with any of the terms of this License with respect to some or all of the Covered  
Code due to statute, judicial order, or regulation then You must: (a) comply with the terms of this License to the  
maximum extent possible; and (b) describe the limitations and the code they affect. Such description must be  
included in the LEGAL file described in Section 3.4 and must be included with all distributions of the Source Code.  
Except to the extent prohibited by statute or regulation, such description must be sufficiently detailed for a recipient  
of ordinary skill to be able to understand it.  
5. Application of this License.  
This License applies to code to which the Initial Developer has attached the notice in Exhibit A and to related Covered  
Code.  
6. Versions of the License.  
6.1.  
New Versions.  
Netscape Communications Corporation (“Netscape”) may publish revised and/or new versions of the License  
from time to time. Each version will be given a distinguishing version number.  
Effect of New Versions.  
6.2.  
Once Covered Code has been published under a particular version of the License, You may always continue to  
use it under the terms of that version. You may also choose to use such Covered Code under the terms of any  
subsequent version of the License published by Netscape. No one other than Netscape has the right to modify  
the terms applicable to Covered Code created under this License.  
6.3.  
Derivative Works.  
If You create or use a modified version of this License (which you may only do in order to apply it to code  
which is not already Covered Code governed by this License), You must (a) rename Your license so that the  
phrasesMozilla, MOZILLAPL”, MOZPL”, Netscape, MPL”, NPLor any confusingly similar phrase do not appear  
in your license (except to note that your license differs from this License) and (b) otherwise make it clear that  
Your version of the license contains terms which differ from the Mozilla Public License and Netscape Public  
License. (Filling in the name of the Initial Developer, Original Code or Contributor in the notice described in  
Exhibit A shall not of themselves be deemed to be modifications of this License.)  
7. DISCLAIMER OF WARRANTY.  
COVERED CODE IS PROVIDED UNDER THIS LICENSE ON ANAS ISBASIS, WITHOUT WARRANTY OF ANY KIND, EITHER  
EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE COVERED CODE IS FREE OF  
DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE RISK AS TO THE  
QUALITY AND PERFORMANCE OF THE COVERED CODE IS WITH YOU. SHOULD ANY COVERED CODE PROVE DEFECTIVE  
IN ANY RESPECT, YOU (NOT THE INITIAL DEVELOPER OR ANY OTHER CONTRIBUTOR) ASSUME THE COST OF ANY  
NECESSARY SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART  
OF THIS LICENSE. NO USE OF ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER.  
8. TERMINATION.  
8.1.  
This License and the rights granted hereunder will terminate automatically if You fail to comply with terms  
herein and fail to cure such breach within 30 days of becoming aware of the breach. All sublicenses to the  
Covered Code which are properly granted shall survive any termination of this License. Provisions which, by  
their nature, must remain in effect beyond the termination of this License shall survive.  
If You initiate litigation by asserting a patent infringement claim (excluding declatory judgment actions)  
against Initial Developer or a Contributor (the Initial Developer or Contributor against whom You file such  
action is referred to asParticipant”) alleging that:  
8.2.  
(a) such Participant’s Contributor Version directly or indirectly infringes any patent, then any and all rights  
granted by such Participant to You under Sections 2.1 and/or 2.2 of this License shall, upon 60 days notice  
from Participant terminate prospectively, unless if within 60 days after receipt of notice You either: (i)  
agree in writing to pay Participant a mutually agreeable reasonable royalty for Your past and future use of  
Modifications made by such Participant, or (ii) withdraw Your litigation claim with respect to the  
Contributor Version against such Participant. If within 60 days of notice, a reasonable royalty and payment  
arrangement are not mutually agreed upon in writing by the parties or the litigation claim is not  
withdrawn, the rights granted by Participant to You under Sections 2.1 and/or 2.2 automatically terminate  
at the expiration of the 60 day notice period specified above.  
(b) any software, hardware, or device, other than such Participant’s Contributor Version, directly or indirectly  
infringes any patent, then any rights granted to You by such Participant under Sections 2.1(b) and 2.2(b)  
are revoked effective as of the date You first made, used, sold, distributed, or had made, Modifications  
made by that Participant.  
100  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8.3.  
8.4.  
If You assert a patent infringement claim against Participant alleging that such Participant’s Contributor Version  
directly or indirectly infringes any patent where such claim is resolved (such as by license or settlement) prior  
to the initiation of patent infringement litigation, then the reasonable value of the licenses granted by such  
Participant under Sections 2.1 or 2.2 shall be taken into account in determining the amount or value of any  
payment or license.  
In the event of termination under Sections 8.1 or 8.2 above, all end user license agreements (excluding  
distributors and resellers) which have been validly granted by You or any distributor hereunder prior to  
termination shall survive termination.  
9. LIMITATION OF LIABILITY.  
UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER TORT (INCLUDING NEGLIGENCE), CONTRACT,  
OR OTHERWISE, SHALL YOU, THE INITIAL DEVELOPER, ANY OTHER CONTRIBUTOR, OR ANY DISTRIBUTOR OF COVERED  
CODE, OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR ANY INDIRECT, SPECIAL,  
INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR  
LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER  
COMMERCIAL DAMAGES OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH  
DAMAGES. THIS LIMITATION OF LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY RESULTING  
FROM SUCH PARTY’S NEGLIGENCE TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH LIMITATION. SOME  
JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO  
THIS EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU.  
10. U.S. GOVERNMENT END USERS.  
The Covered Code is acommercial item,as that term is defined in 48 C.F.R. 2.101 (Oct. 1995), consisting ofcommercial  
computer softwareandcommercial computer software documentation,as such terms are used in 48 C.F.R. 12.212  
(Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995), all U.S.  
Government End Users acquire Covered Code with only those rights set forth herein.  
11. MISCELLANEOUS.  
This License represents the complete agreement concerning subject matter hereof. If any provision of this License is  
held to be unenforceable, such provision shall be reformed only to the extent necessary to make it enforceable. This  
License shall be governed by California law provisions (except to the extent applicable law, if any, provides otherwise),  
excluding its conflict-of-law provisions. With respect to disputes in which at least one party is a citizen of, or an entity  
chartered or registered to do business in the United States of America, any litigation relating to this License shall be  
subject to the jurisdiction of the Federal Courts of the Northern District of California, with venue lying in Santa Clara  
County, California, with the losing party responsible for costs, including without limitation, court costs and reasonable  
attorneysfees and expenses. The application of the United Nations Convention on Contracts for the International Sale  
of Goods is expressly excluded. Any law or regulation which provides that the language of a contract shall be  
construed against the drafter shall not apply to this License.  
12. RESPONSIBILITY FOR CLAIMS.  
As between Initial Developer and the Contributors, each party is responsible for claims and damages arising, directly or  
indirectly, out of its utilization of rights under this License and You agree to work with Initial Developer and  
Contributors to distribute such responsibility on an equitable basis. Nothing herein is intended or shall be deemed to  
constitute any admission of liability.  
13. MULTIPLE-LICENSED CODE.  
Initial Developer may designate portions of the Covered Code asMultiple-Licensed. Multiple-Licensedmeans that  
the Initial Developer permits you to utilize portions of the Covered Code under Your choice of the NPL or the  
alternative licenses, if any, specified by the Initial Developer in the file described in Exhibit A.  
EXHIBIT A -Mozilla Public License.  
The contents of this file are subject to the Mozilla Public License Version 1.1 (theLicense”); you may not use this file  
except in compliance with the License. You may obtain a copy of the License at  
http://www.mozilla.org/MPL/  
Software distributed under the License is distributed on anAS ISbasis, WITHOUT WARRANTY OF ANY KIND, either  
express or implied. See the License for the specific language governing rights and limitations under the License.  
The Original Code is Mozilla Communicator client code, released March 31, 1998.  
The Initial Developer of the Original Code is Netscape Communications Corporation.  
Portions created by the Initial Developer are Copyright (C) 1998-1999 the Initial Developer. All Rights Reserved.  
101  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contributor(s):  
Alternatively, the contents of this file may be used under the terms of either of the GNU General Public License Version  
2 or later (theGPL), or the GNU Lesser General Public License Version 2.1 or later (theLGPL), in which case the  
provisions of the GPL or the LGPL are applicable instead of those above. If you wish to allow use of your version of this  
file only under the terms of either the GPL or the LGPL, and not to allow others to use your version of this file under the  
terms of the MPL, indicate your decision by deleting the provisions above and replace them with the notice and other  
provisions required by the GPL or the LGPL. If you do not delete the provisions above, a recipient may use your version  
of this file under the terms of any one of the MPL, the GPL or the LGPL.  
The MIT License  
Copyright (c) 1998-2004,2005 Free Software Foundation, Inc.  
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated  
documentation files (theSoftware”), to deal in the Software without restriction, including without limitation the rights to  
use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom  
the Software is furnished to do so, subject to the following conditions:  
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the  
Software.  
THE SOFTWARE IS PROVIDEDAS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT  
LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN  
NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,  
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE  
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  
10ꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
Displaying photos............................................18, 37, 41  
A
Access point................................................................ 51, 54  
Add to shared frames.................................................... 58  
AOSS........................................................................................ 51  
AOSS button....................................................................... 52  
Auto power on/off.......................................................... 62  
E
Encryption key .................................................................. 54  
F
Frame.......................................................................17, 23, 26  
Frame settings................................................................... 57  
B
Bookmarks ........................................................................... 59  
Brightness adjustment................................................. 61  
Browse Screen................................................................... 18  
G
Google............................................................................ 32, 60  
Google account........................................................ 32, 33  
C
H
Capture frame screen ................................................... 57  
CompactFlash............................................................ 14, 15  
Compatible memory cards ....................................... 15  
Connecting to a wireless network........................ 51  
Copy to internal memory................................... 57, 58  
Create new frame.............................................23, 57, 58  
Home screen.............................................................. 17, 26  
I
Information browse screen............................... 17, 31  
Initialization......................................................................... 62  
Input address ..................................................................... 59  
Internal memory...................................................... 20, 72  
Internal memory info.................................................... 62  
IP address.............................................................................. 62  
D
Date and time settings................................................. 61  
Delete all in the folder.................................................. 58  
Delete cookies................................................................... 59  
Delete from shared frame.......................................... 57  
Delete photos.................................................................... 58  
Delete RSS............................................................................ 58  
Delete track......................................................................... 58  
Demonstration.................................................................. 61  
Device name ...................................................................... 62  
Digital still camera........................................................... 14  
M
Memories frame............................................................... 29  
Memory Stick media.............................................. 14, 15  
Music browse screen..................................................... 30  
Music frame......................................................................... 30  
103  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Standby mode....................................................16, 61, 62  
Start Timer............................................................................ 61  
Start Web browser .......................................................... 57  
Stop Timer............................................................................ 61  
System settings................................................................. 62  
N
Network settings.............................................................. 60  
New info indicator .....................................................8, 62  
News frame......................................................................... 31  
O
T
Options menu ................................................................... 57  
Timer settings.................................................................... 61  
Turning the Power On.................................................. 16  
P
Photo browse screen .................................................... 27  
Photo display position.................................................. 61  
Photos and Info frame.......................................... 23, 28  
Photos frame...................................................................... 28  
Picasa Web Albums by Google........32, 33, 35, 37  
Play ........................................................................................... 57  
U
Upload............................................................................ 36, 57  
USB cable.............................................................................. 14  
USB memory ...................................................................... 14  
V
VAIO Media.......................................................................... 40  
VAIO Media Integrated Server................................. 40  
VAIO Media Server Settings....................................... 40  
R
Register RSS......................................................................... 59  
Remote Home Access .................................................. 60  
Replacing the battery................................................... 13  
RSS frame.............................................................................. 31  
W
Wireless LAN router................................................ 51, 54  
S
Z
Sample images.................................................................. 18  
Screen display.................................................................... 61  
SD/SDHC memory card............................................... 14  
SD memory card.............................................................. 15  
Security type....................................................................... 54  
Server settings................................................................... 60  
Set as background photo........................................... 58  
Settings.................................................................................. 17  
Settings menu................................................................... 60  
Shared frame...................................................................... 29  
SHOUTcast ............................................................17, 30, 44  
SSID.......................................................................................... 54  
Zoom....................................................................................... 59  
10ꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printed on 70% or more recycled paper  
using VOC (Volatile Organic Compound)  
-free vegetable oil based ink.  
© 2008 Sony Corporation / Printed in Japan  
3-300-630-32 (1)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sennheiser Headphones RR4200 User Manual
Sherwood CD Player V 903 User Manual
Shure Corded Headset WH20 User Manual
Solid State Logic Music Mixer X Rack E Series User Manual
Sony Car Stereo System CXS GT3516F User Manual
Sony Clock Radio ICF C273 User Manual
Sony Ericsson Camcorder HVR Z5U User Manual
Sony MP3 Player D EJ721 User Manual
Sony Two Way Radio NTM 910DUAL User Manual
Sportline Heart Rate Monitor DUO 1025 User Manual