Sony Car Stereo System CDX MP70 User Manual

3-239-019-21 (1)

FM/AM

Compact Disc

Player

Operating Instructions

Mode d’emploi

Manual de instrucciones

Owner’s Record

The model and serial numbers are located on the bottom of the unit.

Record these numbers in the space provided below.

Refer to these numbers whenever you call upon your Sony dealer regarding this product.

Model No. CDX-MP70 Serial No.

For installation and connections, see the supplied installation/connections manual.

En ce qui concerne l’installation et les connexions, consulter le manuel

d’installation/raccordement fourni.

Para obtener información sobre la instalación y las conexiones, consulte el manual

de instalación/conexiones suministrado.

CDX-MP70

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

Location of controls. . . . . . . . . . . . . . . . . . . . 4

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Notes on discs . . . . . . . . . . . . . . . . . . . . . . . . 7

About MP3 files . . . . . . . . . . . . . . . . . . . . . . 8

Other Functions

Using the rotary commander. . . . . . . . . . . . 19

Adjusting the sound characteristics . . . . . . 21

Quickly attenuating the sound . . . . . . . . . . 21

Changing the sound and display settings

— Menu . . . . . . . . . . . . . . . . . . . . . . . . . 21

Setting the Dynamic Soundstage Organizer

(DSO). . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Setting the equalizer . . . . . . . . . . . . . . . . . . 23

Adjusting the front and rear volume. . . . . . 24

Adjusting the volume of the

Getting Started

Resetting the unit. . . . . . . . . . . . . . . . . . . . . . 9

Detaching the front panel . . . . . . . . . . . . . . 10

Setting the clock . . . . . . . . . . . . . . . . . . . . . 11

CD Player

CD/MD Unit (optional)

Playing a disc. . . . . . . . . . . . . . . . . . . . . . . . 11

Display items. . . . . . . . . . . . . . . . . . . . . . . . 13

Playing tracks repeatedly

— Repeat Play . . . . . . . . . . . . . . . . . . . . 13

Playing tracks in random order

subwoofer(s). . . . . . . . . . . . . . . . . . . . . . 24

Selecting the spectrum analyzer . . . . . . . . . 25

Labeling a Demo display

— Appearing Characters . . . . . . . . . . . . 25

Connecting auxiliary audio equipment. . . . 26

— Shuffle Play . . . . . . . . . . . . . . . . . . . . 13

Labeling a CD

— Disc Memo*. . . . . . . . . . . . . . . . . . . . 14

Locating a disc by name

— List-up* . . . . . . . . . . . . . . . . . . . . . . . 15

* Functions available with optional CD/MD unit

Additional Information

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 27

Removing the unit. . . . . . . . . . . . . . . . . . . . 28

Specifications . . . . . . . . . . . . . . . . . . . . . . . 29

Troubleshooting . . . . . . . . . . . . . . . . . . . . . 30

Error displays/Messages . . . . . . . . . . . . . . . 31

Radio

Storing stations automatically

— Best Tuning Memory (BTM). . . . . . . 16

Receiving the stored stations. . . . . . . . . . . . 16

Storing only desired stations . . . . . . . . . . . . 17

Storing station names

— Station Memo. . . . . . . . . . . . . . . . . . . 17

Tuning in a station through a list

— List-up . . . . . . . . . . . . . . . . . . . . . . . . 18

Download from Www.Somanuals.com. All Manuals Search And Download.

Location of controls

CDX-MP70

Behind the front panel

Download from Www.Somanuals.com. All Manuals Search And Download.

Refer to the pages listed for details.

Card remote commander RM-X112

a VOL (volume) control dial/SOUND

button

Rotate to:

– Adjust the volume.

– Adjust the sound setting.

Press to:

– Select the sound setting.

b SOURCE button

To select the source.

SCRL

DSPL

REP

SHUF

c MODE button

To change the operation.

d DSPL button 13, 14, 26

e Display window

f LIST button 12, 14, 15, 15 17, 18

g MENU button

MODE

DSO

EQ7

DISC

SOURCE

–

SEEK

To display the menus.

h Z (eject) button 11, 12, 12

i RELEASE button 10

j OFF (Stop/Power off) button* 10, 12,

25, 26

k Receptor for the card remote

commander and wireless rotary

commander

–

DISC

OFF

ATT

VOL

–

l REP button 13

m SHUF button 13

n m/M (SEEK –/+) buttons

To fast-forward, reverse a track,

tune in stations automatically,

find a station manually, and

select a setting.

The corresponding buttons of the card

remote commander control the same

functions as those on this unit.

o ./> (–/+) control dial

Rotate to:

a SCRL button

b DSPL button

– Receive preset stations.

– Skip tracks.

– Select a menu.

Press to:

– Enter a setting.

c Number buttons

d DSO button

e MENU button

f SOURCE button

g SEEK (</,) buttons

h SOUND button

i OFF button

p OPEN/CLOSE button 10, 11

q N (play) button 11

r RESET button 9

j VOL (+/–) buttons

k MODE button

l EQ7 button

* Warning when installing in a car without

an ACC (accessory) position on the

ignition switch

After turning off the ignition, be sure to press

(OFF) on the unit for 2 seconds to turn off the

clock display.

m LIST button

n DISC/ALBUM (M/m) buttons

o ENTER button

p ATT button

Otherwise, the clock display does not turn off

and causes battery drain.

continue to next page t

Download from Www.Somanuals.com. All Manuals Search And Download.

Note

If the unit is turned off by pressing (OFF) for

2 seconds, it cannot be operated with the card remote

commander unless (SOURCE) on the unit is pressed

to reactivate the unit first.

Precautions

• If your car was parked in direct sunlight, allow

the unit to cool off before operating it.

• Power antennas will extend automatically

while the unit is operating.

Tip

See “Replacing the lithium battery” on page 27 for

details on how to replace the batteries.

• Do not use the CUSTOM FILE feature while

driving, or perform any other function which

could divert your attention from the road.

Selecting a disc and album with the

card remote commander

Disc and album can be skipped using the DISC/

ALBUM (M/m) buttons on the card remote

commander.

If you have any questions or problems

concerning your unit that are not covered in this

manual, please consult your nearest Sony dealer.

(With this unit)

Moisture condensation

Press

On a rainy day or in a very damp area, moisture

condensation may occur inside the lenses and

display of the unit. Should this occur, the unit

will not operate properly. In such a case, remove

the disc and wait for about an hour until the

moisture has evaporated.

Skip albums*

– Album selection album]

M or m [once for each

To continuously skip

albums, press and hold

either button.

To maintain high sound quality

Be careful not to splash juice or other soft drinks

onto the unit or discs.

(With optional unit)

Press

Skip discs

– Disc selection

M or m [once for each disc]

To continuously skip discs,

press once and press again

within 1 second (and hold)

either button.

Notes on CD lens

• Do not touch the lens in the disc tray.

• Do not use a commercially available lens

cleaner.

Skip albums*

– Album selection and release

M or m [hold for a moment]

To continuously skip

albums, press (and hold)

within 1 second of first

releasing the button.

* Available only when an MP3 file is played.

Skipping tracks continuously

Press once either SEEK/AMS (< or ,)

button on the card remote commander, then

press again within 1 second and hold.

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes on CD-Rs (recordable CDs)/CD-

RWs (rewritable CDs)

This unit can play the following discs:

Notes on discs

• To keep the disc clean, do not touch the surface.

Handle the disc by its edge.

Type of discs

Label on the disc

• Keep your discs in their cases or disc

magazines when not in use.

Do not subject the discs to heat/high

temperature. Avoid leaving them in parked cars

or on dashboards/rear trays.

Audio CD

MP3 files

• Do not attach labels, or use discs with sticky

ink/residue. Such discs may stop spinning

when used, causing a malfunction, or may ruin

the disc.

• Some CD-Rs/CD-RWs (depending on the

equipment used for its recording or the

condition of the disc) may not play on this unit.

• You can play a CD-R/CD-RW that is not

finalized*.

• You can play MP3 files recorded on CD-

ROMs, CD-Rs, and CD-RWs.

* A process necessary for a recorded CD-R/CD-RW

disc to be played on the audio CD player.

• Do not use any discs with labels or stickers

attached as this may cause inability to read

audio data correctly (e.g., playback skipping, or

no playback) due to heat shrinking of a sticker

or label causing a disc to warp.

• Discs with non-standard shapes (e.g., heart,

square, star) cannot be played on this unit.

Attempting to do so may damage the unit. Do

not use such discs.

• Before playing, clean discs with a

commercially available cleaning cloth. Wipe

each disc from the center out. Do not use

solvents such as benzine, thinner, commercially

available cleaners, or antistatic spray intended

for analog discs.

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes

• With formats other than ISO 9660 level 1 and level 2,

folder names or file names may not be displayed

correctly.

About MP3 files

• When naming, be sure to add the file extension

“.MP3” to the file name.

• If you put the extension “.MP3” to a file other than

MP3, the unit cannot recognize the file properly and

will generate random noise that could damage your

speakers.

MP3 (MPEG 1 Audio Layer-3) is a standard

technology and format for compressing a sound

sequence. The file is compressed to about 1/10 of

its original size. Sounds outside the range of

human hearing are compressed while the sounds

we can hear are not compressed.

• The following discs take a longer time to start

playback.

– a disc recorded with complicated tree structure.

– a disc recorded in Multi Session.

– a disc to which data can be added (non-finalized

disc).

Notes on discs

You can play MP3 files recorded on CD-ROMs,

CD-Rs, and CD-RWs.

The disc must be in the ISO 9660*¹level 1 or

level 2 format, or Joliet or Romeo in the

expansion format.

Cautions when playing a disc that is recorded in

Multi Session

• When the first track of the first session is audio CD

data:

You can use a disc recorded in Multi Session*².

Non-audio CD data information (track number, time,

etc.) is displayed with no sound.

• When the first track of the first session is not audio

CD data:

– If an MP3 file is in the disc, only MP3 file(s) play

back and other data is skipped. (Audio CD data is

not recognized.)

– If no MP3 file is in the disc, “NO Music” is

displayed and nothing is played back. (Audio CD

data is not recognized.)

ISO 9660 Format

The most common international standard for

the logical format of files and folders on a

CD-ROM.

There are several specification levels. In

Level 1, file names must be in the 8.3 format

(no more than 8 characters in the name, no

more than 3 characters in the extension

“.MP3”) and in capital letters. Folder names

can be no longer than 8 characters. There can

be no more than 8 nested folder levels. Level

2 specifications allow file names up to 31

characters long.

Each folder can have up to 8 trees.

For Joliet or Romeo in the expansion format,

make sure of the contents of the writing

software, etc.

Multi Session

This is a recording method that enables

adding of data using the Track-At-Once

method. Conventional CDs begin at a CD

control area called the Lead-in and end at an

area called Lead-out. A Multi Session CD is a

CD having multiple sessions, with each

segment from Lead-in to Lead-out regarded

as a single session.

CD-Extra: The format which records audio

(audio CD data) as tracks on session 1, and

records data as tracks on session 2.

Mixed CD: In this format, data is recorded as

track 1, and audio (audio CD data) is recorded

as track 2.

Download from Www.Somanuals.com. All Manuals Search And Download.

The playback order of the MP3 files

The playback order of the folders and files is as

follows:

Getting Started

Folder (album)

Resetting the unit

MP3 file (track)

Before operating the unit for the first time, or

after replacing the car battery or changing the

connections, you must reset the unit.

Remove the front panel and press the RESET

button with a pointed object, such as a ball-point

pen.

RESET button

Note

Pressing the RESET button will erase the clock setting

and some stored contents.

Tree 1

(root)

Tree 2

Tree 3

Tree 4

Tree 5

Notes

• A folder that does not include an MP3 file is skipped.

• Maximum folder number: 255 (including root folder

and empty folders)

• The maximum number of MP3 files and folders that

can be contained in a disc: 512

When a file/folder name contains many characters,

this number may become less than 512.

• The maximum number of trees which can be played

is 8.

Tip

To specify a desired playback order, before the folder

or file name, input the order by number (e.g., “01,”

“02”), then record contents onto a disc. (The order

differs depending on the writing software.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Attaching the front panel

Attach part A of the front panel to part B of the

unit as illustrated and push the left side into

position until it clicks.

Detaching the front panel

You can detach the front panel of this unit to

protect the unit from being stolen.

Caution alarm

If you turn the ignition switch to the OFF

position without removing the front panel, the

caution alarm will beep for a few seconds.

1 Press (OFF)*.

CD/MD playback or radio reception stops

(the key illumination and display remain on).

* If your car has no ACC position on the ignition

switch, be sure to turn the unit off by pressing

(OFF) for 2 seconds to avoid car battery drain.

Notes

2 Press (RELEASE) to open up the front

• Do not put anything on the inner surface of the front

panel.

panel and pull it off towards you.

• Do not detach the front panel during the eject

operation. If the front panel is detached during eject,

operation will stop.

To eject the disc when you do not have the front

panel attached, press (OPEN/CLOSE) inside the

unit through hole C with a pointed object, such

as a ballpoint pen.

(RELEASE)

Notes

• If you detach the panel while the unit is still turned

on, the power will turn off automatically to prevent

the speakers from being damaged.

• Do not drop or put excessive pressure on the front

panel and its display window.

• Close the front panel before you detach it.

• Do not subject the front panel to heat/high

temperature or moisture. Avoid leaving it in parked

cars or on dashboards/rear trays.

Tip

When carrying the front panel with you, use the

supplied front panel case.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the clock

The clock uses a 12-hour digital indication.

CD Player

CD/MD Unit (optional)

Example: To set the clock to 10:08

In addition to playing a CD with this unit, you

can also control external CD/MD units.

Note

If you connect an optional CD unit with the CD TEXT

function, the CD TEXT information will appear in the

display when you play a CD TEXT disc.

./> control

dial

1 Press (MENU), then rotate the

./> control dial until “Clock”

appears.

Playing a disc

(With this unit)

1 Press Z.

The disc compartment slides out.

2 Place a disc on the disc tray with the

label side up.

Insert the disc until it clicks.

1Press the ./> control dial.

The hour indication flashes.

2Rotate the ./> control dial to

set the hour.

3Press the M+ button.

The minute indication flashes.

4Rotate the ./> control dial to

set the minute.

2 Press the ./> control dial.

3 Press N.

The disc compartment closes and playback

starts.

If a disc is already inserted, press (SOURCE)

repeatedly until “CD” appears in the display, and

playback starts. (If you press (OPEN/CLOSE),

the disc compartment closes but playback does

not start.)

The clock starts. After the clock setting is

completed, the display returns to normal play

mode.

Notes

• Do not place more than 1 disc on the disc tray.

• The disc compartment closes automatically after 30

seconds.

Tip

When D.Info mode is set to on, the time is always

displayed (page 21).

continue to next page t

Download from Www.Somanuals.com. All Manuals Search And Download.

(With optional unit)

1 Press (SOURCE) repeatedly to select

“CD” or “MD (MS*).”

./> control

dial

2 Press (MODE) repeatedly until the

desired unit appears.

Playback starts.

* MS: MG Memory Stick System-up Player MGS-X1.

Do this

Cautions when connecting MGS-X1 and MD unit(s)

This unit recognizes MGS-X1 as an MD unit.

• When you want to play MGS-X1, press (SOURCE) to

select “MS” or “MD.” If “MS” appears in the source

display, MGS-X1 starts to play. If “MD” appears in

the source display, press (MODE) to select “MS,” to

start playback.

Stop playback

Eject the disc

Press (OFF).

Press Z.

Skip tracks

– Automatic

Music Sensor

Rotate the ./>

control dial.

• When you want to play an MD unit, press (SOURCE)

to select “MD” or “MS.” If your desired MD unit

appears in the source display, it starts to play. If “MS”

or another MD unit appears in the source display,

press (MODE) to select your desired MD unit, to

start playback.

Fast-forward/

reverse

– Manual Search the desired point.

Press and hold the –m or

M+ button, and release at

Skip albums*

– Album selection ./> control dial.

Press (LIST), then rotate the

Locating a disc

— Disc selection

* Available only when an MP3 file is played.

To remove the disc, press down the center

spindle, and lift up the edge of the disc from the

relief in the disc tray.

See “Locating a disc by name” on page 15.

Notes

• Depending on the recording method used on the

disc, it may take a minute or more before playing the

first track.

• Depending on the condition of the disc, it may not

play back (page 7, 8).

• Such discs should be finalized.

• While the first/last track on the disc is playing, if the

./> control dial is rotated, playback skips to

the last/first track of the disc.

• When the last track on the disc is over, playback

restarts from the first track of the disc.

• With optional unit connected, playback of the same

source will continue on to the optional CD/MD unit.

• There is a delay for a few seconds after pressing Z

before the disc tray is ejected, after reading the data

in the disc.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Display items

Playing tracks repeatedly

— Repeat Play

When the disc/album/track changes, any

prerecorded title*¹of the new disc/album/track is

automatically displayed (if the Auto Scroll

function is set to “on,” names exceeding 9

characters will be scrolled (page 21)).

The disc in the main unit will repeat a track, the

entire album, or the entire disc when it reaches

the end. For repeat play, you can select:

• REP TRACK — to repeat a track.

• REP ALBUM*¹— to repeat an album.

• REP DISC*²— to repeat a disc.

DISC/ALBUM TRACK

number number

Elapsed

playing time

*1 Available only for MP3 files.

*2 Available only when one or more optional CD/MD

units are connected.

During playback, press (REP)

repeatedly until the desired setting

appears in the display.

Repeat Play starts.

Displayable items

• Disc name*¹/artist name*²

• Album (folder) name*³

• Track (file) name*¹

• ID3 tag*³

To return to normal play mode, select “REP off.”

Playing tracks in random

order

Press

— Shuffle Play

Switch display

item

(DSPL)

You can select:

• SHUF ALBUM*¹— to play the tracks in the

current album in random order.

• SHUF DISC — to play the tracks on the

current disc in random order.

Scroll display item (DSPL) for 2 seconds

*1 When pressing (DSPL), “NO D.Name” or “NO

T.Name” indicates that there is no Disc Memo

(page 14) or prerecorded name to display.

*2 Only for CD TEXT discs with the artist name.

*3 Only for MP3 files.

Only track name/artist name/album name in ID3

tag is displayed.

When pressing (DSPL), “NO ID3 Tag” indicates

that there is no ID3 tag to display.

• SHUF CHNGR*²— to play the tracks in the

current optional CD (MD) unit in random

order.

• SHUF ALL*³— to play all the tracks in all the

connected CD (MD) units (including this unit)

in random order.

*1 Available only for MP3 files.

*2 Available only when one or more optional CD (MD)

units are connected.

*3 Available only when one or more optional CD units,

or two or more optional MD units are connected.

Notes

• Some characters cannot be displayed.

• For some CD TEXT discs with very many

characters, information may not scroll.

• This unit cannot display the artist name for each

track of a CD TEXT disc.

During playback, press (SHUF)

repeatedly until the desired setting

appears in the display.

Notes on MP3

• ID3 tag applies only to version 1.

• The ID3 tag character codes comply with ASCII and

ISO 8859-1 standards. Joliet format discs can only

be displayed in ASCII. Incompatible characters will

be displayed as “ *.”

Shuffle Play starts.

To return to normal play mode, select “SHUF

off.”

• In the following cases, elapsed playing time may not

be displayed accurately.

Note

– when an MP3 file of VBR (variable bit rate) is

played.

– during fast-forward/reverse.

“SHUF ALL” will not shuffle tracks between CD units

and MD units.

Tip

When Auto scroll is set to off and the disc/album/track

name is changed, the disc/album/track name does not

scroll.

Download from Www.Somanuals.com. All Manuals Search And Download.

4 Enter the characters.

Labeling a CD

1Rotate the ./> control dial to

select the desired character.

— Disc Memo (For a CD unit with the

CUSTOM FILE function)

A y B y C ... y 0 y 1 y 2 ... y

+ y – y ... y * y A

You can label each disc with a custom name

(Disc Memo). You can enter up to 8 characters

for a disc. If you label a CD, you can locate the

disc by name (page 15).

* (blank space)

2Press the M+ button after locating

the desired character.

Caution

Do not use the CUSTOM FILE feature while

driving, or perform any other function which

could divert your attention from the road.

If you press the –m button, you can

move back to the left.

./> control

dial

3Repeat steps 1 and 2 to enter the

entire name.

5 To return to normal CD play mode,

press the ./> control dial.

1 Start playing the disc you want to label

in a CD unit with the CUSTOM FILE

function.

Tips

• Simply overwrite or enter “ ” to correct or erase a

name.

• There is another way to start labeling a CD: Press

(LIST) for 2 seconds instead of performing steps 2

and 3. You can also complete the operation by

pressing (LIST) for 2 seconds instead of step 5.

• You can label CDs on a unit without the CUSTOM

FILE function if that unit is connected along with a

CD unit that has the function. The Disc Memo will be

stored in the memory of the CD unit with the

CUSTOM FILE function.

2 Press (MENU), then rotate the

./> control dial until “Name Edit”

appears.

3 Press the ./> control dial.

Note

Repeat/shuffle play is suspended until the Name Edit

is complete.

The unit will repeat the disc during the

labeling procedure.

Viewing the Disc Memo

As a display item, the Disc Memo always takes

priority over any original CD TEXT information.

Press

View

(DSPL) during CD/CD

TEXT disc playback

Tip

To find out about other items that can be displayed,

see page 13.

Download from Www.Somanuals.com. All Manuals Search And Download.

Erasing the Disc Memo

Locating a disc by name

1 Press (SOURCE) repeatedly to select

— List-up (For a CD unit with the CD TEXT/

CUSTOM FILE function, or an MD unit)

“CD.”

2 Press (MODE) repeatedly to select the

CD unit storing the Disc Memo.

You can use this function for discs that have been

assigned custom names*¹or for CD TEXT

discs*².

3 Press (MENU), then rotate the

./> control dial until “Name Del”

appears.

*1 Locating a disc by its custom name: when you

assign a name for a CD (page 14) or an MD.

*2 Locating discs by the CD TEXT information: when

you play a CD TEXT disc on a CD unit with the CD

TEXT function.

4 Press the ./> control dial.

The stored names will appear.

5 Rotate the ./> control dial to

select the disc name you want to

erase.

6 Press the ./> control dial for

2 seconds.

./> control

dial

The name is erased.

Repeat steps 5 and 6 if you want to erase

other names.

7 Press (MENU) twice.

1 Press (LIST).

The unit returns to normal CD play mode.

The name assigned to the current disc appears

in the display.

Notes

• When the Disc Memo for a CD TEXT disc is erased,

the original CD TEXT information is displayed.

• If you cannot find the Disc Memo you want to erase,

try selecting a different CD unit in step 2.

2 Rotate the ./> control dial until

you find the desired disc.

3 Press the ./> control dial to play

the disc.

Note

In the case of CD TEXT discs and MDs, some letters

cannot be displayed.

Locating an album or track by name

When a name is assigned to an album*³, or

track*⁴, you can locate it by name.

1 Press (LIST) repeatedly until album/

track name appears in the display.

Each time you press (LIST), the display will

change in order of disc name, album name,

and track name.

After 5 seconds, the display returns to the

normal playback mode.

2 Rotate the ./> control dial until

you find the desired album/track.

Playback starts.

*3 Available only for MP3 files.

*4 Available only for MP3 files, CD TEXT disc, and

MD.

Download from Www.Somanuals.com. All Manuals Search And Download.

Receiving the stored stations

Radio

The unit can store up to 6 stations per band

(FM1, FM2, FM3, AM1, and AM2).

./> control

dial

Caution

When tuning in stations while driving, use Best

Tuning Memory to prevent accidents.

1 Press (SOURCE) repeatedly to select

the radio.

Storing stations

automatically

2 Press (MODE) repeatedly to select the

band.

— Best Tuning Memory (BTM)

3 Rotate the ./> control dial until

you find the desired station.

The unit selects the stations with the strongest

signals within the selected band, and stores them

in the order of their frequency.

Tip

Press the number button ((1) to (6)) on the card

remote commander to select the stored station

directly.

If preset tuning does not work

./> control

dial

Press the –m or M+ button to

search for the station (automatic

tuning).

Scanning stops when the unit receives a

station. Repeat until the desired station is

received.

1 Press (SOURCE) repeatedly to select

the radio.

Tips

2 Press (MODE) repeatedly to select the

• If automatic tuning stops too frequently, turn on the

Local Seek to limit seek to stations with stronger

signals (see “Changing the sound and display

settings” on page 21).

• If you know the frequency of the station you want to

listen to, press and hold the –m or M+ button to

locate the approximate frequency, then press the

–m or M+ button repeatedly to fine adjust to the

desired frequency (manual tuning).

band.

3 Press (MENU), then rotate the

./> control dial until “BTM”

appears.

4 Press the ./> control dial.

A beep sounds when the setting is stored.

Notes

• If only a few stations can be received due to weak

signals, some stored numbers will retain their former

settings.

• When a number is indicated in the display, the unit

starts storing stations from the one currently

displayed.

If FM stereo reception is poor

Select monaural reception mode

(see “Changing the sound and display

settings” on page 21).

The sound improves, but becomes monaural

(“ST” disappears).

Note

If interference occurs, this unit will automatically

narrow the reception frequency to eliminate noise (IF

Auto function). In such cases, some FM stereo

broadcasts may become monaural while in the stereo

reception mode.

Tips

• To always hear FM stereo broadcasts in stereo, you

can change the IF Auto setting and widen the

frequency signal reception (see “Changing the

sound and display settings” on page 21). Note that

some interference may occur in this setting.

• If FM broadcasts are difficult to hear, set DSO to off

(page 22).

Download from Www.Somanuals.com. All Manuals Search And Download.

Storing only desired stations Storing station names

— Station Memo

You can manually preset desired stations.

You can assign a name to each radio station and

store it in memory. The name of the station

currently tuned in appears in the display. You can

assign a name using up to 8 characters for a

./> control

dial

station.

Storing the station names

1 Tune in a station whose name you

want to store.

1 Press (SOURCE) repeatedly to select

the radio.

2 Press (MENU), then rotate the

./> control dial until “Name Edit”

appears.

2 Press (MODE) repeatedly to select the

band.

3 Press the –m or M+ button to tune

3 Press the ./> control dial.

in the station that you want to store.

4 Press (MENU), then rotate the

./> control dial until “Preset

Edit” appears.

5 Press the ./> control dial.

6 Rotate the ./> control dial to

select the number that you want to

store.

4 Enter the characters.

1Rotate the ./> control dial to

7 Press the ./> control dial.

The stored station indication appears in the

display.

select the desired character.

A y B y C ... y 0 y 1 y 2 ... y

+ y – y ... y * y A

8 Press (MENU) twice.

Note

* (blank space)

If you try to store another station on the same stored

number, the previously stored station will be erased.

2Press the M+ button after locating

the desired character.

Operating with the card remote

commander

1 Press (SOURCE) repeatedly to select

the radio.

2 Press (MODE) repeatedly to select the

If you press the –m button, you can

move back to the left.

band.

3 Press (SEEK -) or (SEEK +) to tune in

3Repeat steps 1 and 2 to enter the

entire name.

the station that you want to store.

4 Press the desired number button ((1)

5 Press the ./> control dial.

to (6)) until “MEM” appears.

Tips

• Simply overwrite or enter “ ” to correct or erase a

name.

• There is another way to start storing station names:

Press (LIST) for 2 seconds instead of performing

steps 2 and 3. You can also complete the operation

by pressing (LIST) for 2 seconds instead of step 5.

• If no memory is remaining, “Mem Full” appears in

the display, and you cannot assign a station name.

^{continue to next page t}17

Download from Www.Somanuals.com. All Manuals Search And Download.

Erasing the station name

Tuning in a station through a

1 During radio reception, press (MENU),

then rotate the ./> control dial

until “Name Del” appears.

list

— List-up

2 Press the ./> control dial.

3 Rotate the ./> control dial to

select the station whose name you

want to erase.

./> control

dial

4 Press the ./> control dial for 2

seconds.

The name is erased.

Repeat steps 3 to 4 if you want to erase other

names.

1 During radio reception, press (LIST)

momentarily.

5 Press (MENU) twice.

The unit returns to normal radio reception

mode.

The frequency or the name assigned to the

current station appears in the display.

After 5 seconds, the display returns to the

normal playback mode.

Note

If you have already erased all of the station names,

“NO Data” appears in step 4.

2 Rotate the ./> control dial until

you find the desired station.

If no name is assigned to the selected station,

the frequency appears in the display.

3 Press the ./> control dial to tune

in the desired station.

Download from Www.Somanuals.com. All Manuals Search And Download.

By pressing buttons

Turn the dial to change the

direction of infrared rays.

Other Functions

(ATT)

You can also control the unit (and optional CD/

MD units) with a rotary commander (optional).

(SOUND)

(SOURCE)

(MODE)

Using the rotary commander

First, attach the appropriate label depending on

how you want to mount the rotary commander.

The rotary commander works by pressing

buttons and/or rotating controls.

(DSPL)

(OFF)

Rotate the VOL control

to adjust the volume.

Press

(SOURCE)

Change source (radio/CD/

MD*¹/AUX)/Power on

DSPL

MODE

SOUND

MODE

DSPL

(MODE)

Change operation

(radio band/CD unit/MD*¹

unit)

Inserting the supplied lithium battery

(ATT)

Attenuate sound

(OFF)*²

Stop playback or radio

reception/Power off

(SOUND)

(DSPL)

Select the sound menu

Change the display item

(For 2 seconds to scroll the

display item)

*1 Only if the corresponding optional equipment is

connected.

*2 If your car has no ACC (accessory) position on the

ignition key switch, be sure to press (OFF) for 2

seconds to turn off the clock indication after turning

off the ignition.

+ side up

continue to next page t

Tip

See “Notes on lithium battery” on page 27 for

information on lithium battery.

Download from Www.Somanuals.com. All Manuals Search And Download.

By rotating the control

(With optional unit)

Do this

Skip discs

– Disc selection

Push in and rotate [once for

each disc] the control.

To continuously skip discs,

push in and rotate once and

rotate again within 1 second

(and hold) the control.

SEEK/AMS

control

Skip albums

Push in and rotate the

– Album selection control [hold for a moment]

and release.

Rotate and release to:

To continuously skip

– Skip tracks.

albums, push in and rotate

again (and hold) within 1

second of first releasing the

control.

To continuously skip tracks, rotate once and

rotate again within 1 second and hold the

control.

– Tune in stations automatically.

Rotate, hold, and release to:

– Fast-forward/reverse a track.

– Find a station manually.

Changing the operative direction

The operative direction of controls is factory-set

as shown below.

By pushing in and rotating the control

To increase

PRESET/DISC

control

To decrease

If you need to mount the rotary commander on

the right hand side of the steering column, you

can reverse the operative direction.

Push in and rotate the control to:

– Receive preset stations.

– Change the disc.*¹

– Change the album.*²

*1 When an optional CD/MD unit is connected.

*2 When an MP3 file is played.

When an MP3 file is played, you can select an

album using the rotary commander.

(With this unit)

Do this

Rev

Nor

Skip albums

Push in and rotate [once for

– Album selection each album] the control.

To continuously skip

Set the Rev/Nor-select switch to “Rev.”

albums, push in and rotate

(and hold) the control.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting the sound

characteristics

You can adjust the bass, treble, balance, fader,

and subwoofer volume.

Changing the sound and

display settings

— Menu

The following items can be set:

The bass and treble levels and subwoofer volume

can be stored independently for each source.

Set Up

• Clock (page 11)

• Beep — to turn the beeps on or off.

• AUX-A (page 26) — to turn the AUX source

display on or off.

VOL control dial

Display

• D.Info (Dual Information) — to display the

clock and the play mode at the same time (on).

Functions only when SA is not set to B-1 – B-5.

• SA (Spectrum Analyzer) (page 25) — to

change the display pattern of the equalizer

display.

1 Press (SOURCE) to select a source

(radio, CD, MD, or AUX).

2 Press the VOL control dial repeatedly

to select the item you want to adjust.

Each time you press the VOL control dial, the

item changes as follows:

• Demo

– Select “on” to activate the Demo display.

The Demo display will appear about 10

seconds after the unit is turned off.

• Dimmer — to change the brightness of the

display.

– Select “Auto” to dim the display only when

you turn the lights on.

– Select “on” to dim the display.

– Select “off” to deactivate the Dimmer.

• Contrast — to adjust the contrast if the

indications on the display are not recognizable

because of the unit’s installation position.

• Color — to select from a range of 7 display

colors.

DSO t EQ7 t BAS (bass)

t TRE (treble) t BAL (left-right)

t FAD (front-rear)

t SUB (subwoofer volume)

3 Rotate the VOL control dial to adjust

the selected item.

Note

Adjust within 3 seconds after selecting the item.

Quickly attenuating the

sound

(With the rotary commander or the card

remote commander)

• A.Scrl (Auto Scroll)

– Select “on” to scroll all automatically

displayed names exceeding 9 characters.

– When Auto scroll is set to off and the disc/

track name is changed, the disc/track name

does not scroll.

Press (ATT) on the rotary commander

or card remote commander.

“ATT on” appears in the display momentarily.

Play Mode

• Local on/off (Local seek mode) (page 16)

– Select “on” to only tune into stations with

stronger signals.

To restore the previous volume level, press

(ATT) again.

• Mono on/off (Monaural mode) (page 16)

– Select “on” to hear FM stereo broadcast in

monaural. Select “off” to return to normal

mode.

Tip

When the interface cable of a car telephone is

connected to the ATT lead, the unit decreases the

volume automatically when a telephone call comes in

(Telephone ATT function).

• IF Auto/Wide (page 16)

continue to next page t

Download from Www.Somanuals.com. All Manuals Search And Download.

Sound

• EQ7 Tune (page 23) — to adjust the equalizer

curve.

Setting the Dynamic

Soundstage Organizer (DSO)

• HPF (High pass filter) (page 24)

• LPF (Low pass filter) (page 25)

• Loud (Loudness) — to enjoy bass and treble

even at low volumes. The bass and treble will

be reinforced.

• AUX Level (page 26) — to adjust the volume

level of connected auxiliary equipment.

If your speakers are installed into the lower part

of the doors, the sound will come from below

and may not be clear.

The DSO (Dynamic Soundstage Organizer)

function creates a more ambient sound as if there

were speakers in the dashboard (virtual

speakers).

You can store the DSO setting for each source.

./> control

dial

VOL control dial

1 Press (MENU).

To set A.Scrl, press (MENU) during CD/MD

playback.

1 Press (SOURCE) to select a source

(radio, CD, MD, or AUX).

2 Rotate the ./> control dial until

the desired item appears.

2 Press the VOL control dial repeatedly

until “DSO” appears.

3 Press the –m or M+ button to

select the desired setting (Example:

“on” or “off”).

4 Press the ./> control dial.

After the mode setting is completed, the

display returns to normal play mode.

Note

3 Rotate the VOL control dial to select

“DSO on” or “DSO off.”

The displayed item will differ depending on the source.

Tip

Turn the VOL control dial clockwise for “on,”

and counterclockwise for “off.”

To cancel the DSO function, select “DSO

off.”

You can easily switch among categories by pressing

(DISC +) or (DISC -) on the card remote commander

for 2 seconds.

After 3 seconds, the display returns to the

normal playback mode.

Notes

• Depending on the type of car interior or type of

music, DSO may not have a desirable affect.

• If FM broadcasts are difficult to hear, set DSO to off.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting the equalizer curve

You can store and adjust the equalizer settings

for frequency and level.

Setting the equalizer

You can select an equalizer curve for 7 music

types (Xplod, Vocal, Club, Jazz, New Age, Rock,

and Custom).

You can store a different equalizer setting for

each source.

./> control

dial

Selecting the equalizer curve

1 Press (SOURCE) to select a source

(radio, CD, MD, or AUX).

2 Press (MENU), then rotate the

./> control dial until “EQ7 Tune”

appears.

VOL control dial

3 Press the ./> control dial.

4 Press the –m or M+ button to

select the desired equalizer curve,

then press the ./> control dial.

Each time you press the –m or M+

button, the item changes.

1 Press (SOURCE) to select a source

(radio, CD, MD, or AUX).

2 Press the VOL control dial repeatedly

until “EQ7” appears.

5 Select the desired frequency and level.

1Press the –m or M+ button to

select the desired frequency.

Each time you press the –m or M+

button, the frequency changes.

3 Rotate the VOL control dial to select

the desired equalizer curve.

62 Hz y 157 Hz y 396 Hz y 1.0 kHz

y 2.5 kHz y 6.3 kHz y 16 kHz

To cancel the equalizing effect, select “off.”

After 3 seconds, the display returns to the

normal playback mode.

Note

When DSO is set to on, equalizer settings are

automatically adjusted for best overall effect.

2Rotate the ./> control dial to

adjust the desired level.

The level is adjustable by 1 dB steps from

–10 dB to +10 dB.

To restore the factory-set equalizer curve,

press the ./> control dial for 2

seconds.

6 Press the ./> control dial.

After the effect setting is complete, the

display returns to the normal playback mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting the front and rear

volume

./> control

dial

VOL control dial

1 During playback or radio reception,

press (MENU).

2 Rotate the ./> control dial until

“HPF” appears.

1 Press (SOURCE) to select a source

(radio, CD, MD, or AUX).

2 Press the VOL control dial repeatedly

until “FAD” appears.

3 Press the –m or M+ button to

select the cut-off frequency.

Each time you press the –m or M+

button, the frequency changes as follows:

off (default setting) y 78 Hz y 125 Hz

3 Rotate the VOL control dial to adjust

the volume of front/rear speakers.

After 3 seconds, the display returns to the

normal playback mode.

4 Press the ./> control dial.

After the frequency setting is complete, the

display returns to the normal playback mode.

Adjusting the cut-off frequency for the

front/rear speakers

To match the characteristics of the installed

speaker system, you can select the cut-off

frequency of the speakers.

Adjusting the volume of the

subwoofer(s)

Cut-off frequency

off

VOL control dial

1 Press (SOURCE) to select a source

(radio, CD, MD, or AUX).

Frequency (Hz)

2 Press the VOL control dial repeatedly

until “SUB” appears.

3 Rotate the VOL control dial to adjust

the volume.

After 3 seconds, the display returns to the

normal playback mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Tip

The volume level is adjustable from –10 dB to +10 dB.

(Below –10 dB, “–∞ dB” is displayed.)

Selecting the spectrum

analyzer

The sound signal level is displayed on a spectrum

analyzer. You can select a display for ten patterns

(A-1 to A-5 or B-1 to B-5), or the automatic

display mode where all the patterns appear.

Adjusting the cut-off frequency for the

subwoofer(s)

To match the characteristics of the connected

subwoofer(s), you can cut out the unwanted high

and middle frequency signals entering the

subwoofer(s). By setting the cut-off frequency

(see the diagram below), the subwoofer(s) will

output only low frequency signals so you can get

a clearer sound image.

./> control

dial

Cut-off frequency

off

1 Press (SOURCE) to select a source

(radio, CD, MD, or AUX).

2 Press (MENU).

3 Rotate the ./> control dial until

Frequency (Hz)

“SA” appears.

./> control

dial

4 Press the –m or M+ button to

select the desired setting.

1 During playback or radio reception,

5 Press the ./> control dial.

press (MENU).

2 Rotate the ./> control dial until

“LPF” appears.

Labeling a Demo display

— Appearing Characters

You can label a Demo display with up to 64

characters to appear when the unit is turned off.

Labels will scroll in the display with Demo set to

“on.” (The display remains lit even when the

power is off.)

3 Press the –m or M+ button to

select the cut-off frequency.

Each time you press the –m or M+

button, the frequency changes as follows:

off (default setting) y 125 Hz y 78 Hz

./> control

dial

4 Press the ./> control dial.

After the frequency setting is complete, the

display returns to the normal playback mode.

1 Press (OFF).

CD/MD playback or radio reception stops

(the key illumination and display remain on).

continue to next page t

Download from Www.Somanuals.com. All Manuals Search And Download.

2 Press (MENU), then rotate the

./> control dial until “Name

Input” appears.

Connecting auxiliary audio

equipment

3 Press the ./> control dial.

You can connect auxiliary audio equipment to

this unit with the AUX IN connector.

Selecting auxiliary equipment

Press (SOURCE) repeatedly to select

“AUX.”

4 Enter the characters.

1Press (DSPL) to select the character

type.

A t a t 0 t A

2Rotate the ./> control dial to

select the desired character.

Adjusting the volume level

You can adjust the volume for each connected

audio equipment.

...

“

*(blank space)

3Press the M+ button after locating

the desired character.

./> control

dial

1 Press (MENU), then rotate the

./> control dial until “AUX Level”

appears.

If you press the –m button, you can

move back to the left.

2 Press the ./> control dial.

4Repeat steps 1 to 3 to enter the

entire sentence.

3 Rotate the ./> control dial to

select the desired volume level.

The volume level is adjustable in 1 dB steps

from –6 dB to +6 dB.

5 Press the ./> control dial.

Tips

• Simply overwrite or enter “ ” to correct or erase a

sentence.

• To erase all sentences, press the ./> control

dial for 2 seconds after step 3.

4 Press the ./> control dial.

To deactivate “AUX-A” in the music

source display

1 Press (OFF).

CD/MD playback or radio reception stops

(the key illumination and display remain on).

2 Press (MENU).

3 Rotate the ./> control dial until

“AUX-Aon” appears.

4 Press the M+ button to select

“AUX-Aoff.”

5 Press (MENU).

To restore the indication, select “AUX-A on.”

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes

• For safety, turn off the ignition before cleaning the

connectors, and remove the key from the ignition

switch.

• Never touch the connectors directly with your fingers

or with any metal device.

Additional Information

Maintenance

Replacing the lithium battery

Under normal conditions, batteries will last

approximately 1 year. (The service life may be

shorter, depending on the conditions of use.)

When the battery becomes weak, the range of the

card remote commander becomes shorter.

Replace the battery with a new CR2025 lithium

battery. Use of any other battery may present a

risk of fire or explosion.

Fuse replacement

When replacing the fuse, be sure to use one

matching the amperage rating stated on the

original fuse. If the fuse blows, check the power

connection and replace the fuse. If the fuse blows

again after replacement, there may be an internal

malfunction. In such a case, consult your nearest

Sony dealer.

Fuse (10 A)

+ side up

Warning

Never use a fuse with an amperage rating

exceeding the one supplied with the unit as this

could damage the unit.

Cleaning the connectors

The unit may not function properly if the

connectors between the unit and the front panel

are not clean. In order to prevent this, detach the

front panel (page 10) and clean the connectors

with a cotton swab dipped in alcohol. Do not

apply too much force. Otherwise, the connectors

may be damaged.

Notes on lithium battery

• Keep the lithium battery out of the reach of

children. Should the battery be swallowed,

immediately consult a doctor.

• Wipe the battery with a dry cloth to assure a

good contact.

• Be sure to observe the correct polarity when

installing the battery.

Main unit

• Do not hold the battery with metallic tweezers,

otherwise a short-circuit may occur.

WARNING

Battery may explode if mistreated.

Do not recharge, disassemble, or dispose of

in fire.

Back of the front panel

Download from Www.Somanuals.com. All Manuals Search And Download.

Removing the unit

1 Remove the front cover

1Detach the front panel (page 10).

2Press the clip inside the front cover

with a thin screwdriver.

3Repeat step 2 for the other side.

2 Remove the unit

1Use a thin screwdriver to push in

the clip on the left side of the unit,

then pull out the left side of the unit

until the catch clears the mounting.

4 mm

(³/16 in.)

2Repeat step 1 for the right side.

3Slide the unit out of its mounting.

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

AUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL HARMONIC DISTORTION

23 watts per channel minimum continuous average power into 4 ohms,

4 channels driven from 20 Hz to 20 kHz with no more than 5% total

harmonic distortion.

Inputs

Telephone ATT control

terminal

Illumination control

terminal

BUS control input terminal

BUS audio input terminal

AUX IN terminal

Remote controller input

terminal

Antenna input terminal

Bass 8 dB at 100 Hz

Treble 8 dB at 10 kHz

+8 dB at 100 Hz

CD Player section

Signal-to-noise ratio

Frequency response

Wow and flutter

95 dB

10 – 20,000 Hz

Below measurable limit

Tuner section

Tuning range

87.5 – 107.9 MHz

External antenna connector

10.7 MHz/450 kHz

8 dBf

75 dB at 400 kHz

66 dB (stereo),

Antenna terminal

Intermediate frequency

Usable sensitivity

Selectivity

Tone controls

Loudness

+2 dB at 10 kHz

Signal-to-noise ratio

Power requirements

Dimensions

12 V DC car battery

(negative ground)

72 dB (mono)

Harmonic distortion at 1 kHz

0.6 % (stereo),

Approx. 178

(7 /8 × 2 × 7 /4 in.)

182 mm

0.3 % (mono)

35 dB at 1 kHz

30 – 15,000 Hz

(w/h/d)

Separation

Frequency response

Mounting dimensions

Approx. 182

(7 /4 × 2 /8 × 6 /8 in.)

(w/h/d)

161 mm

Tuning range

Antenna terminal

Intermediate frequency

Sensitivity

Mass

Approx. 1.6 kg

(3 lb 9 oz)

530 – 1,710 kHz

External antenna connector

10.7 MHz/450 kHz

30 µV

Supplied accessories

Parts for installation and

connections (1 set)

Front panel case (1)

Card remote commander

RM-X112

Wireless rotary commander

RM-X5S

BUS cable (supplied with

an RCA pin cord)

RC-61 (1 m), RC-62 (2 m)

CD changer (10 discs)

CDX-757MX, CDX-656

CD changer (6 discs)

CDX-T70MX, CDX-T69

MD changer (6 discs)

MDX-66XLP

Power amplifier section

Outputs

Optional accessories

Optional equipment

Speaker outputs

(sure seal connectors)

4 – 8 ohms

Speaker impedance

Maximum power output 52 W × 4 (at 4 ohms)

General

Outputs

Audio outputs (front/rear)

Subwoofer output (mono)

Power antenna relay control

terminal

Power amplifier control

terminal

MG Memory Stick

system-up player

MGS-X1

Source selector

XA-C30

Note

This unit cannot be connected to a digital preamplifier

or an equalizer.

Design and specifications are subject to change

without notice.

Download from Www.Somanuals.com. All Manuals Search And Download.

The power is continuously supplied to the

unit.

The car does not have an ACC position.

Troubleshooting

tPress (OFF) for 2 seconds.

The power antenna does not extend.

The power antenna does not have a relay box.

The following checklist will help you remedy

problems you may encounter with your unit.

Before going through the checklist below, check

the connection and operating procedures.

Cannot turn off the “--------” indication.

You entered the name edit mode.

tPress (LIST) for 2 seconds.

General

The operation buttons do not function.

Press the RESET button.

CD/MD playback

No sound.

Playback does not begin.

• Defective MD or dirty CD.

• Some CD-Rs/CD-RWs may not play due to

its recording equipment or the disc

condition.

• Rotate the VOL control dial clockwise to

adjust the volume.

• Cancel the ATT function.

• Set the fader control to the center position for

a 2-speaker system.

MP3 files cannot be played back.

• Recording was not performed according to

the ISO 9660 level 1 or level 2 format, or the

Joliet or Romeo in the expansion format.

• The file extension “.MP3” is not added to the

file name.

The contents of the memory have been

erased.

• The RESET button has been pressed.

tStore again into the memory.

• The power cord or battery has been

disconnected.

• Files are not stored in MP3 format.

• The power connecting cord is not connected

properly.

MP3 files take longer to play back than

others.

The following discs take a longer time to start

No beep sound.

The beep sound is canceled (page 21).

playback.

Indications disappear from/do not appear in

the display.

• The clock display disappears if you press

(OFF) for 2 seconds.

tPress (OFF) again for 2 seconds to

display the clock.

• Remove the front panel and clean the

connectors. See “Cleaning the connectors”

on page 27 for details.

– a disc recorded with complicated tree

structure.

– a disc recorded in Multi Session.

– a disc to which data can be added (non-

finalized disc).

The sound skips from vibration.

• The unit is installed at an angle of more than

30°.

• The unit is not installed in a sturdy part of

the car.

Stored stations and correct time are erased.

The fuse has blown.

Makes noise when the ignition key is in the

ON, ACC, or OFF position.

The sound skips.

• Defective or dirty disc.

• The CD-R/CD-RW has been damaged.

The leads are not matched correctly with the

car’s accessory power connector.

continue to next page t

No power is being supplied to the unit.

• Check the connection. If everything is in

order, check the fuse.

• The car does not have an ACC position.

tPress (SOURCE) to turn on the unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio reception

Preset tuning is not possible.

• Store the correct frequency in the memory.

• The broadcast signal is too weak.

Error displays/Messages

Error displays

(For this unit and optional CD/MD changers)

The following indications will flash for about

5 seconds, and an alarm sound will be heard.

The stations cannot be received.

The sound is hampered by noises.

• Connect a power antenna control lead (blue)

or accessory power supply lead (red) to the

power supply lead of a car’s antenna booster.

(Only when your car has built-in FM/AM

antenna in the rear/side glass.)

• Check the connection of the car antenna.

• The auto antenna will not go up.

tCheck the connection of the power

antenna control lead.

Blank*¹

No tracks have been recorded on an MD.*²

tPlay an MD with recorded tracks on it.

Error*¹

• A CD is dirty or inserted upside down.*²

tClean or insert the CD correctly.

• A CD/MD cannot play because of some

problem.*²

• Check the frequency.

• When the DSO mode is on, the sound is

sometimes hampered by noises.

tInsert another CD/MD.

High Temp

The ambient temperature is more than 50°C

(122°F).

tWait until the temperature goes down

below 50°C (122°F).

tSet the DSO mode to off (page 22).

Automatic tuning is not possible.

• The local seek mode is set to “on.”

tSet the local seek mode to “off” (page

21).

• The broadcast signal is too weak.

tPerform manual tuning.

NO Disc

No disc is inserted in the CD/MD unit.

tInsert discs in the CD/MD unit.

NO Mag

The “ST” indication flashes.

• Tune in the frequency accurately.

• The broadcast signal is too weak.

tSet to the monaural reception mode (page

21).

The disc magazine is not inserted in the CD/

MD unit.

tInsert the magazine in the CD/MD unit.

NO Music*¹

A program broadcast in stereo is heard in

monaural.

The unit is in monaural reception mode.

tCancel monaural reception mode (page

21).

A CD which is not a music file is inserted.

tInsert a music CD.

Not Ready

The lid of the MD unit (MDX-40) is open or

the MDs are not inserted properly.

tClose the lid or insert the MDs properly.

Push Reset

The CD/MD unit cannot be operated because

Interference occurs during FM reception.

The wide mode is selected.

tSet the IF mode to “IF Auto” (page 21).

of some problem.

tPress the RESET button on the unit.

*1 When the CD/MD changer is connected to the unit,

the disc number of the CD or MD appears in the

display.

*2 The disc number of the disc causing the error

appears in the display.

If these solutions do not help improve the

situation, consult your nearest Sony dealer.

Messages

LCL Seek +/–

The Local Seek mode is on during automatic

tuning (page 16).

“

” or “

”

You have reached the beginning or the end of

the disc and you cannot go any further.

Download from Www.Somanuals.com. All Manuals Search And Download.

About ID3 tag version 2

Although not a malfunction, the following occurs

when an MP3 file containing ID3 tag ver.2 is

played:

– When skipping a portion of ID3 tag ver.2 (at the

beginning of the track), sound is not output.

Skip time changes depending ID3 tag ver.2

capacity.

Example: At 64 kbytes, it is about 2 seconds

(with RealJukebox).

– The displayed elapsed playing time when

skipping a portion of ID3 tag ver.2 is inaccurate.

For MP3 files of a bit rate other than 128 kbps,

time is not displayed accurately during playback.

– When an MP3 file is created with MP3

conversion software (ex. RealJukebox*), ID3 tag

ver.2 will automatically be written.

* “RealJukebox is a registered trademark of

RealNetworks, Inc.”

As of December, 2001

Download from Www.Somanuals.com. All Manuals Search And Download.

Sony Corporation Printed in Korea

Download from Www.Somanuals.com. All Manuals Search And Download.

3-239-032-21 (1)

3 A

AUDIO OUT

FRONT

SUB OUT (MONO)

FM/AM

Compact Disc

Player

AUDIO OUT

REAR

Installation/Connections

Installation/Connexions

Instalación/Conexiones

BUS AUDIO IN

BUS CONTROL IN

BUS AUDIO IN

Source selector*

Sélecteur de source*

Selector de fuente*

XA-C30

BUS CONTROL IN

* not supplied

non fourni

no suministrados

CDX-MP70

Cautions

Connection diagram (4)

1 To a metal surface of the car

• This unit is designed for negative ground 12 V DC

operation only.

First connect the black ground lead, then connect

the yellow and red power input leads.

2 To the power antenna control lead or power

supply lead of antenna booster amplifier

Notes

• Do not get the wires under a screw, or caught in

moving parts (e.g. seat railing).

• Before making connections, turn the car ignition

off to avoid short circuits.

• Connect the yellow and red power input leads

only after all other leads have been connected.

• Run all ground wires to a common ground

point.

• Be sure to insulate any loose unconnected wires

with electrical tape for safety.

121 (4 ⁷/8

)

142.5 (5 ⁵/8

)

• It is not necessary to connect this lead if there is no

power antenna or antenna booster, or with a

manually-operated telescopic antenna.

• When your car has a built-in FM/AM antenna in

the rear/side glass, see “Notes on the control and

power supply leads.”

18.5 (³/4

)

19 (³/4

)

3 To AMP REMOTE IN of an optional power

amplifier

60 (2 ³/8

)

170 (6 ³/4

)

• The use of optical instruments with this product

will increase eye hazard.

Unit: mm (in.)

This connection is only for amplifiers. Connecting

any other system may damage the unit.

Unité : mm (po.)

Unidad: mm

Notes on the power supply cord (yellow)

• When connecting this unit in combination with

other stereo components, the connected car

circuit’s rating must be higher than the sum of

each component’s fuse.

• When no car circuits are rated high enough,

connect the unit directly to the battery.

4 To the interface cable of a car telephone

5 To a car’s illumination signal

Be sure to connect the black ground lead to it first.

Dimensions include unit size, front panel and disc tray open, etc.

Les dimensions comprennent l’appareil lui-même, la façade et le plateau de disque lorsqu’ils sont

ouverts, etc.

6 To the +12 V power terminal which is energized

in the accessory position of the ignition key

switch

Las dimensiones incluyen el tamaño de la unidad, el panel frontal y la bandeja de discos abierta, etc.

Notes

• If there is no accessory position, connect to the +12

V power (battery) terminal which is energised at all

times.

Be sure to connect the black ground lead to it first.

• When your car has a built-in FM/AM antenna in

the rear/side glass, see “Notes on the control and

power supply leads.”

Before installation (1)

Do not install the unit where its operation interferes

with driving.

Example:

7 To the +12 V power terminal which is energised

at all times

— Opening and closing of the front panel or disc

tray interfere with operation of the gear shift.

— With the front panel open, operation of hazard

lamps, switches etc., is impaired.

TOP

Be sure to connect the black ground lead to it first.

Notes on the control and power supply leads

• The power antenna control lead (blue) supplies +12 V

DC when you turn on the tuner.

× 4

× 2

• When your car has built-in FM/AM antenna in the rear/

side glass, connect the power antenna control lead

(blue) or the accessory power input lead (red) to the

power terminal of the existing antenna booster. For

details, consult your dealer.

Parts Iist (2)

The numbers in the list are keyed to those in the

instructions.

Caution

• A power antenna without relay box cannot be used

with this unit.

Handle the bracket

1 carefully to avoid

injuring your fingers.

Memory hold connection

When the yellow power input lead is connected, power

will always be supplied to the memory circuit even when

the ignition key is turned off.

Notes on speaker connection

• Before connecting the speakers, turn the unit off.

• Use speakers with an impedance of 4 to 8 ohms, and

with adequate power handling capacities to avoid its

damage.

• Do not connect the speaker terminals to the car

chassis, or connect the terminals of the right speakers

with those of the left speaker.

• Do not connect the ground lead of this unit to the

negative (–) terminal of the speaker.

• Do not attempt to connect the speakers in parallel.

• Connect only passive speakers. Connecting active

speakers (with built-in amplifiers) to the speaker

terminals may damage the unit.

Equipment used in illustrations (not supplied)

Appareils utilisés dans les illustrations (non fournis)

Equipos utilizados en las ilustraciones (no suministrados)

Connection example (3)

Note (3-A)

Be sure to connect the ground cord before connecting

the amplifier.

Tip (3-B-

)

Front speaker

Haut-parleur avant

Altavoz delantero

Power amplifier

Amplificateur de puissance

Amplificador de potencia

For connecting two or more CD/MD changers, the source

selector XA-C30 (optional) is necessary.

Rear speaker

CD/MD changer

• To avoid a malfunction, do not use the built-in speaker

wires installed in your car if the unit shares a common

negative (–) lead for the right and left speakers.

• Do not connect the unit’s speaker cords to each other.

Haut-parleur arrière

Altavoz trasero

Changeur de CD/MD

Cambiador de CD/MD

Active subwoofer

Caisson de graves actif

Altavoz potenciador de graves activo

Download from Www.Somanuals.com. All Manuals Search And Download.

Supplied with XA-C30

Fourni avec le XA-C30

Suministrado con el XA-C30

Source selector

Sélecteur de source

Selector de fuente

Supplied with the CD/MD changer

Fourni avec le changeur de CD/MD

Suministrado con el cambiador de CD/MD

XA-C30

SUB OUT (MONO)

BUS AUDIO IN

AUDIO OUT

FRONT

RCA pin cord (not supplied)

Cordon à broche RCA (non fourni)

Cable con clavijas RCA (no suministrado)

Auxiliary optional equipment such as portable DVD player DVP-FX1 (not supplied)

Equipement auxiliaire en option tel que le lecteur portable DVD DVP-FX1 (non fourni)

Equipo opcional auxiliar como un reproductor de DVD portátil DVP-FX1 (no suministrado)

BUS

AUDIO IN

REAR FRONT

AUDIO OUT

supplied with the auxialiry equipment

fourni avec l’équipement auxiliaire

suministrado con el equipo auxiliar

BUS

CONTROL IN

AUDIO OUT REAR

AUX IN

Be sure to match the color-coded code for audio to the appropriate jacks from the unit.

Veillez à faire correspondre le code couleur audio aux fiches de l’appareil.

Asegúrese de hacer coincidir el código codificado con colores para audio con las tomas

apropiadas de la unidad.

from car antenna

à partir de l’antenne de la

voiture

(AUDIO)*⁴

Fuse (10 A)

Fusible (10 A)

Blue/white striped

Rayé bleu/blanc

Con raya azul/blanca

para la antena del automóvil

AMP REM

Max. supply current 0.3 A

Courant max. fourni 0,3 A

Black

Noir

Negro

Corriente máx. de alimentación de 0,3 A

White

Blanc

Blanco

Blue

Bleu

Azul

Left

Gauche

Izquierdo

ANT REM

Max. supply current 0.1 A

Courant max. fourni 0,1 A

Corriente máx. de alimentación de 0,1 A

White/black striped

Rayé blanc/noir

Con raya blanca/negra

Light blue

Bleu ciel

Azul celeste

Gray

Gris

ATT

Right

Droit

Derecho

Gray/black striped

Rayé gris/noir

Con raya gris/negra

Orange/white striped

Rayé orange/blanc

Con raya naranja/blanca

ILLUMINATION

Green

Vert

Verde

Left

Gauche

Izquierdo

Red

Rouge

Rojo

Green/black striped

Rayé vert/noir

Con raya verde/negra

Yellow

Jaune

Amarillo

Purple

Mauve

Púrpura

Right

Droit

Derecho

Purple/black striped

Rayé mauve/noir

Con raya púrpura/negra

2 Vers le fil de commande de l‘antenne électrique

ou le fil d‘alimentation de l‘amplificateur

d‘antenne

2 Para conectar al cable de control de la antena

motorizada o al cable de fuente de alimentación

del amplificador de antena

Précautions

Precauciones

•Esta unidad ha sido diseñada para alimentarse

solamente con 12 V CC, negativo a masa.

•No coloque los cables debajo de ningún tornillo,

ni los aprisione con partes móviles (p.ej. los raíles

del asiento).

Remarques

Notas

•Cet appareil est exclusivement conçu pour

fonctionner sur une tension de 12 V CC avec

masse négative.

• Il n'est pas nécessaire de raccorder ce fil s'il n'y a

pas d'antenne électrique ni d'amplificateur

d'antenne, ou avec une antenne télescopique

manuelle.

• Si votre voiture est équipée d'une antenne FM/AM

intégrée dans la vitre arrière/latérale, voir

“Remarques sur les fils de commande et

d'alimentation”.

• Si no se dispone de antena motorizada ni de

amplificador de antena, si utiliza una antena

telescópica accionada manualmente, no será

necesario conectar este cable.

•Evitez de fixer des vis sur les câbles ou de coincer

ceux-ci dans des pièces mobiles (par exemple,

armature de siège).

•Avant d’effectuer des raccordements, éteignez le

moteur pour éviter les courts-circuits.

•Raccordez les fils d’entrée d’alimentation jaune et

rouge seulement après avoir terminé tous les

autres raccordements.

•Rassemblez tous les fils de terre en un point de

masse commun.

•Veillez à isoler avec du chatterton tout fil lâche

non raccordé.

• Si el automóvil incorpora una antena de FM/AM en

el cristal trasero/lateral, consulte “Notas sobre los

cables de control y de fuente de alimentación”.

3 Para conectar a AMP REMOTE IN del

amplificador de potencia opcional

Esta conexión es sólo para amplificadores.

La conexión de cualquier otro sistema puede dañar

la unidad.

•Antes de realizar las conexiones, desconecte el

encendido del automóvil para evitar

cortocircuitos.

•Conecte los cables de entrada de alimentación

amarillo y rojo solamente después de haber

conectado los demás.

•Conecte todos los conductores de puesta a

masa a un punto común.

•Por razones de seguridad, asegúrese de aislar con

cinta aislante los cables sueltos que no estén

conectados.

3 Vers AMP REMOTE IN de l’amplificateur de

puissance en option

Ce raccordement s’applique uniquement aux

amplificateurs. Le branchement de tout autre

système risque d’endommager l’appareil.

4 Vers le câble d’interface d’un téléphone de

voiture

4 Para conectar al cable de interfaz de un teléfono

para automóvil

5 A una señal de iluminación del automóvil

Asegúrese de conectar primero el cable de masa

negro.

6 Para conectar al terminal de alimentación de +12

V que recibe energía en la posición de accesorios

del interruptor de la llave de encendido

Notas

5 Au signal d’éclairage de la voiture

Raccordez d‘abord le fil de masse noir.

6 À la borne +12 V qui est alimentée quand la clé

de contact est sur la position accessoires

Remarques

Remarques sur le cordon d’alimentation (jaune)

•Lorsque cet appareil est raccordé à d’autres

appareils stéréo, la valeur nominale des circuits

de la voiture raccordée doit être supérieure à la

somme des fusibles de chaque appareil.

•Si aucun circuit de la voiture n’est assez puissant,

raccordez directement l’appareil à la batterie.

Notas sobre el cable de suministro de

alimentación (amarillo)

•Cuando conecte esta unidad en combinación con

otros componentes estéreo, la capacidad nominal

del circuito conectado del automóvil debe ser

superior a la suma del fusible de cada

componente.

•Si no hay circuitos del automóvil con capacidad

nominal suficientemente alta, conecte la unidad

directamente a la batería.

• S'il n'y a pas de position accessoires, raccordez la

borne d'alimentation (batterie) +12 V qui est

alimentée en permanence.

Raccordez d‘abord le fil de masse noir.

• Si votre voiture est équipée d'une antenne FM/AM

intégrée dans la vitre arrière/latérale, voir

“Remarques sur les fils de commande et

d'alimentation”.

• Si no hay posición de accesorios, conéctelo al

terminal de alimentación (batería) de +12 V que

recibe energía sin interrupción.

Asegúrese de conectar primero el cable de masa

negro.

• Si el automóvil incorpora una antena de FM/AM en

el cristal trasero/lateral, consulte “Notas sobre los

cables de control y de fuente de alimentación”.

7 Para conectar al terminal de alimentación de

+12 V que recibe energía sin interrupción

Asegúrese de conectar primero el cable de masa

negro.

Avant l’installation (1)

À la borne +12 V qui est alimentée en permanence

Raccordez d‘abord le fil de masse noir.

N’installez pas l’appareil dans un endroit où il

pourrait gêner le conducteur dans ses mouvements.

Exemple :

Remarques sur les fils de commande et d'alimentation

• Le fil de commande de l’antenne électrique (bleu)

fournit une alimentation de + 12 V CC lorsque vous

mettez la radio sous tension.

• Lorsque votre voiture est équipée d’une antenne FM/

AM intégrée dans la vitre arrière/latérale, raccordez le

fil de commande de l’antenne (bleu) ou le fil d’entrée

d’alimentation des accessoires (rouge) à la borne de

l’amplificateur d’antenne existant. Pour plus de détails,

consultez votre détaillant.

Antes de realizar la instalación (

— dans un endroit où l’ouverture et la fermeture

de la façade ou du plateau de disque pourraient

nuire aux changements de vitesse ;

— dans un endroit où l’ouverture de la façade

pourrait bloquer l’accès à l’interrupteur de feux

de détresse et aux autres commandes.

No instale la unidad en un lugar donde su

funcionamiento puede interferir con la conducción.

Ejemplo:

Notas sobre los cables de control y de fuente de

alimentación

• El conductor de control de la antena motorizada (azul)

suministrará +12 V CC cuando conecte la alimentación

del sintonizador.

• Si el automóvil dispone de una antena de FM/AM

incorporada en el cristal trasero/lateral, conecte el

cable de control de antena motorizada (azul) o el

cable de entrada de alimentación auxiliar (rojo) al

terminal de alimentación del amplificador de antena

existente. Para obtener información detallada,

consulte a su proveedor.

— La apertura y el cierre del panel frontal o de la

bandeja de discos interfieren con el

funcionamiento de la palanca del cambio de

marchas.

— Con el panel frontal abierto, se perjudica el

funcionamiento de las señales de emergencia,

los interruptores, etc.

• Une antenne électrique sans boîtier de relais ne peut

pas être utilisée avec cet appareil.

Liste des composants (2)

Les numéros de la liste correspondent à ceux des

instructions.

Raccordement pour la conservation de la mémoire

Lorsque le fil d’entrée d’alimentation jaune est raccordé,

le circuit de la mémoire est alimenté en permanence

même si la clé de contact est sur la position d’arrêt.

Attention

Manipulez avec

précautions le

support 1 pour

éviter de vous blesser

aux doigts.

• Con esta unidad no es posible utilizar una antena

motorizada sin caja de relé.

Lista de componentes (2)

Remarques sur le raccordement des haut-parleurs

• Avant de raccorder les haut-parleurs, mettez l’appareil

hors tension.

• Utilisez des haut-parleurs ayant une impédance de 4 à

8 ohms avec une capacité de manipulation adéquate

pour éviter de les endommager.

• Ne raccordez pas les bornes du système de haut-

parleur au châssis de la voiture et ne raccordez pas les

bornes du haut-parleur droit à celles du haut-parleur

gauche.

• Ne raccordez pas le câble de masse de cet appareil à la

borne négative (–) du haut-parleur.

• N’essayez pas de raccorder les haut-parleurs en

parallèle.

• Raccordez uniquement des haut-parleurs passifs. Le

raccordement de haut-parleurs actifs (avec

amplificateurs intégrés) aux bornes des haut-parleurs

peut endommager l’appareil.

• Pour éviter tout dysfonctionnement, n’utilisez pas les

fils des haut-parleurs intégrés installés dans votre

voiture si l’appareil partage un fil négatif commun (–)

pour les haut-parleurs droit et gauche.

• Ne raccordez pas entre eux les cordons des haut-

parleurs de l’appareil.

Los números de la lista corresponden a los de las

instrucciones.

Conexión para protección de la memoria

Si conecta el conductor de entrada amarillo, el circuito

de la memoria recibirá siempre alimentación, incluso

aunque ponga la llave de encendido en la posición OFF.

Precaución

Tenga mucho

Notas sobre la conexión de los altavoces

• Antes de conectar los altavoces, desconecte la

alimentación de la unidad.

• Utilice altavoces con una impedancia de 4 a 8 ohmios

con la capacidad de potencia adecuada para evitar que

se dañen.

• No conecte los terminales de altavoz al chasis del

automóvil, ni conecte los terminales del altavoz

derecho con los del izquierdo.

cuidado al manipular

el soporte 1 para

evitar posibles

Exemple de raccordement (3)

lesiones en los dedos.

Remarque (3-A)

Raccordez d’abord le fil de masse avant de raccorder

l’amplificateur.

Conseil (3-B-

)

Ejemplo de conexiones (3)

Dans le cas du raccordement de deux changeurs de CD/

MD ou plus, le sélecteur de source XA-C30 (en option)

est indispensable.

Nota (3-A)

• No conecte el cable de puesta a tierra de esta unidad

al terminal negativo (–) del altavoz.

Asegúrese de conectar primero el cable de puesta a

masa antes de realizar la conexión al amplificador.

• No intente conectar los altavoces en paralelo.

• Conecte solamente altavoces pasivos. Si conecta

altavoces activos (con amplificadores incorporados) a

los terminales de altavoz, puede dañar la unidad.

• Para evitar fallos de funcionamiento, no utilice los

cables de altavoz incorporados instalados en el

automóvil si el unidad comparte un cable negativo

común (–) para los altavoces derecho e izquierdo.

• No conecte los cables de altavoz de la unidad entre sí.

Consejo (3-B-

)

Si desea conectar dos o más cambiadores de CD/MD,

necesitará el selector de fuente XA-C30 (opcional).

Schéma de raccordement (4)

1 À un point métallique de la voiture

Branchez d‘abord le fil de masse noir et, ensuite, les

fils d‘entrée d‘alimentation jaune et rouge.

Diagramas de conexión (4)

1 A una superficie metálica del automóvil

Conecte primero el cable de masa negro, y después

los cables amarillo y rojo de entrada de

alimentación.

Download from Www.Somanuals.com. All Manuals Search And Download.

(OFF)

5 A

(RELEASE)

182 mm

53 mm

TOP

with the TOP marking up

avec l’inscription TOP vers le haut

con la marca TOP hacia arriba

Dashboard

Tableau de bord

Salpicadero

TOP

Bend these claws outward

for a tight fit, if necessary.

Pliez ces griffes vers l’extérieur pour

assurer une prise correcte si nécessaire.

Si es necesario, doble estas uñas hacia

fuera para que encaje firmemente.

Precautions

•Choose the installation location carefully so

that the unit will not interfere with normal

driving operations.

•Avoid installing the unit in areas subject to

dust, dirt, excessive vibration, or high

temperatures, such as in direct sunlight or near

heater ducts.

•Use only the supplied mounting hardware for

a safe and secure installation.

Mounting the unit in a Japanese

car (7)

You may not be able to install this unit in some

makes of Japanese cars. In such a case, consult

your Sony dealer.

Précautions

•Choisissez soigneusement l’emplacement

d’installation pour que l’appareil ne gêne pas

le chauffeur pendant la conduite.

•Evitez d’installer l’appareil dans un endroit

exposé à la poussière, à la saleté, à des

vibrations excessives ou à des températures

élevées comme en plein soleil ou à proximité

de conduits de chauffage.

•Pour garantir un montage sûr, n’utilisez que le

matériel fourni.

Installation de l’appareil dans

une voiture japonaise (7)

Cet appareil ne peut pas être installé dans

certaines voitures japonaises. Consultez, dans ce

cas, votre revendeur Sony.

Note

Remarque

To prevent malfunction, install only with the

supplied screws 2.

Pour éviter tout dysfonctionnement, utilisez

uniquement les vis 2 pour le montage.

Mounting angle adjustment

Adjust the mounting angle to less than 30°.

Warning when installing in a car

without ACC (accessory)

position on the ignition key

switch

Be sure to press (OFF) on the unit for two

seconds to turn off the clock display after

turning off the engine.

Réglage de l’angle de montage

Ajustez l’inclinaison à un angle inférieur à 30°.

Avertissement en cas

d’installation dans une voiture

dont le contact ne comporte

pas de position ACC

(accessoires)

N’oubliez pas d’appuyer sur le bouton

(OFF) de l’appareil pendant deux

How to detach and attach the

front panel (5)

Before installing the unit, detach the front

panel.

Retrait et pose de la façade (5)

Avant d’installer l’appareil, retirez la façade.

5-A Pour retirer

When you press (OFF) only momentarily, the

clock display does not turn off and this causes

battery wear.

Avant de déposer la façade, n’oubliez pas

d’appuyer sur (OFF). Appuyez sur (RELEASE)

pour ouvrir la façade, puis retirez-la en tirant

vers vous.

5-A To detach

secondes après avoir coupé le moteur de

Before detaching the front panel, be sure to

press (OFF). Press (RELEASE) to open up the

front panel and pull it off towards you.

façon à désactiver l’affichage de l’horloge.

Si vous appuyez brièvement sur (OFF),

l’affichage de l’horloge n’est pas désactivé, ce

qui provoque une usure de la batterie.

5-B Pour poser

RESET button

5-B To attach

Fixez la partie A de la façade sur la partie B de

l’appareil, comme indiqué sur l’illustration, puis

poussez le côté gauche pour le mettre en place

jusqu’au déclic.

Attach part A of the front panel to part B of the

unit as illustrated and push the left side into

position until it clicks.

When the installation and connections are

completed, be sure to press the RESET button

with a ball-point pen, etc., after removing the

front panel.

Touche RESET

Après avoir retiré la façade, une fois que

l’installation et les raccordements sont terminés,

appuyez sur la touche RESET avec un stylo à

bille, etc.

Mounting example (6)

Installation in the dashboard

Exemple de montage (6)

Installation dans le tableau de bord

When installing this unit, be sure to close the

Pendant l’installation de l’appareil, vérifiez

que le panneau avant de cet appareil est

front panel of the unit. (6- )

Do not hold the unit by its front panel or disc

tray when installing as this can damage the unit,

or cause malfunction.

fermé. (6- )

Ne tenez pas l’appareil par la façade ou le

plateau de disque lors de l’installation, car cela

risque d’endommager l’appareil ou d’entraîner

un problème de fonctionnement.

Download from Www.Somanuals.com. All Manuals Search And Download.

A ^TOYOTA

B NISSAN

max. size

5 × 8 mm

(⁷/32

¹¹/32 in.)

(⁷/32

¹¹/32 in.)

to dashboard/center console

au tableau de bord/console centrale

al salpicadero/consola central

to dashboard/center console

au tableau de bord/console centrale

al salpicadero/consola central

Dimension

max. 5 × 8 mm

(⁷/32

¹¹/32 po.)

(⁷/32

¹¹/32 po.)

Tamaño máx.

5 × 8 mm

Bracket

Support

Soporte

max. size

5 × 8 mm

¹¹/32 in.)

Bracket

Support

Soporte

max. size

5 × 8 mm

¹¹/32 in.)

(⁷/32

Dimension

max. 5 × 8 mm

(⁷/32

¹¹/32 po.)

(⁷/32

¹¹/32 po.)

Tamaño máx.

5 × 8 mm

Tamaño máx.

5 × 8 mm

Bracket

Support

Soporte

Bracket

Support

Soporte

Existing parts supplied with your car

Pièces existantes fournies avec la voiture

Piezas existentes suministradas con su automóvil

Pièces existantes fournies avec la voiture

Piezas existentes suministradas con su automóvil

Precauciones

•Elija cuidadosamente el lugar de montaje de

forma que la unidad no interfiera las funciones

normales de conducción.

•Evite instalar la unidad donde pueda quedar

sometida a altas temperaturas, como la luz

solar directa o el aire caliente de la calefacción,

o a polvo, suciedad, o vibraciones excesivas.

•Para realizar una instalación segura y firme,

utilice solamente la ferretería de montaje

suministrada.

Montaje de la unidad en un

automóvil japonés (7)

No podrá instalar esta unidad en algunos

automóviles japoneses. En tal caso, consulte a su

proveedor Sony.

Nota

Para evitar que se produzcan fallos, realice la

instalación solamente con los tornillos suministrados

Ajuste del ángulo de montaje

Ajuste el ángulo de montaje a menos de 30°.

Advertencia sobre la instalación

en un automóvil que no

disponga de posición ACC

(accesorios) en el interruptor de

la llave de encendido

Asegúrese de presionar (OFF) en la

unidad durante dos segundos para

desactivar la indicación del reloj después

Cómo extraer e instalar el panel

frontal (5)

Antes de instalar la unidad, extraiga el panel

frontal.

5-A Para extraerlo

Antes de extraer el panel frontal, asegúrese de

presionar (OFF). Presione (RELEASE) para abrir

el panel frontal y tire hacia usted.

de apagar el motor.

Si presiona (OFF) sólo momentáneamente, la

indicación del reloj no se desactivará y esto

causará el desgaste de la batería.

5-B Para instalarlo

Coloque el orificio A del panel frontal en el eje

B de la unidad, como se muestra en la

ilustración, y después presione la parte

izquierda hasta que oiga un clic.

Botón RESET

Cuando finalice la instalación y las conexiones,

cerciórese de presionar el botón RESET con un

bolígrafo, etc. después de extraer el panel

frontal.

Ejemplo de montaje (6)

Instalación en el salpicadero

Cuando instale esta unidad, asegúrese de

cerrar el panel frontal de la unidad. (6- )

No sujete la unidad por el panel frontal o la

bandeja de discos durante su instalación ya que

puede dañarla o causar un mal funcionamiento.

Download from Www.Somanuals.com. All Manuals Search And Download.

Sharp Cash Register XE A177 User Manual
Silva Battery Charger Solar I User Manual
SMSC Switch LAN8720 User Manual
Snapper Snow Blower 13388E User Manual
Sony Camcorder PJ410 User Manual
Sony Microcassette Recorder M 335 User Manual
Sony Video Game Headset SBH50 User Manual
Sunbeam Electric Heater SFH090 User Manual
Sunfire Stereo Amplifier TGA 7201 User Manual
Sylvania CRT Television 6420FMG User Manual