ENGLISH
MODEL
CD-DH899N
MINI COMPONENT SYSTEM
OPERATION MANUAL
CD-DH899N Mini Component System consisting of CD-DH899N (main unit) and CP-DH899N (speaker system).
ENERGY STAR® Program Information
M
S
T
E
S
Y
N
T
N
E
-DH
M
P
O
899
C
O
N
I
CD
M
I
Products that have earned
the ENERGY STAR® are
designed to protect the
environment through
T
IO
N
F
U
N
C
E
A
N
R
D
-
P
O
W
N
/S
T
B
Y
O
V
O
L
H
N
P
O
U
S
P
E
CD
USB
IN
A
U
D
IO
superior energy efficiency.
S
P
H
O
N
E
T
A
P
E
ENERGY STAR® is a U.S. registered mark.
iPod is a trademark of Apple Inc.,
registered in the U.S. and other countries.
Accessories
Please confirm that only the following accessories are included.
D
U
B
S
C
T
A
PE
Remote control x 1
RRMCGA205AWSA
AM loop antenna x 1
QANTLA004AWZZ
FM antenna x 1
92LFANT1535A
Special Note
Supply of this product does not convey a license nor imply any right to distribute content created with this product in
revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue-
generating streaming applications (via Internet, intranets and/or other networks), other revenue-generating content
distribution systems (pay-audio or audio-on-demand applications and the like) or on revenue-generating physical media
(compact discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
“Made for iPod” means that an electronic accessory has
been designed to connect specifically to iPod and has
been certified by the developer to meet Apple
performance standards.
Apple is not responsible for the operation of this device
or its compliance with safety and regulatory standards.
Printed in Malaysia
10B R M 1
TINSZA643AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
System connections (continued)
Make sure to unplug the AC power cord before making any connections.
TV
AM loop antenna
InstallingtheAMloop
antenna
< Assembling >
To video
input jack
Video cable
(not supplied)
< Attaching to
the wall >
wall
screws
(not supplied)
Left
speaker
FM antenna
Right speaker
Red
Black
AC outlet (AC 120 V ~ 60 Hz)
Remote control
Caution:
Battery installation
● Replace all old batteries with new ones at the same
time.
● Do not mix old and new batteries.
● Remove the batteries if the unit will not be used for a
long period of time. This will prevent potential damage
due to battery leakage.
● Do not use rechargeable batteries (nickel-cadmium
battery, etc.).
● Installing the batteries incorrectly may cause the unit to
malfunction.
● Batteries (battery pack or batteries installed) shall not
be exposed to excessive heat such as sunshine, fire or
the like.
Use 2 “AAA” size batteries (UM/SUM-4, R3, HP-16 or
similar). Batteries are not included.
Open the battery cover.
1
2
Insert the batteries according to the direction indicated
in the battery compartment.
When inserting or removing the batteries, push them
toward the (–) battery terminals.
Close the cover.
3
Notes concerning use:
● Replace the batteries if the operating distance is
reduced or if the operation becomes erratic. Purchase
2 “AAA” size batteries (UM/SUM-4, R3, HP-16 or
similar).
● Periodically clean the transmitter on the remote control
and the sensor on the unit with a soft cloth.
● Exposing the sensor on the unit to strong light may
interfere with operation. Change the lighting or the
direction of the unit if this occurs.
● Keep the remote control away from moisture, heat,
shock, and vibrations.
E-2
Download from Www.Somanuals.com. All Manuals Search And Download.
General control
Bass control
MINI COMPONENT SYSTEM
CD-DH899
1
2
Press the BASS/TREBLE button to select “BASS”.
Within 5 seconds, press the VOLUME (+ or –) button to
adjust the bass.
POWER
ON/STAND-BY
FUNCTION
P
OWER
O
N
/
ST
A
N
D
-
B
Y
VOL
Treble control
1
2
Press the BASS/TREBLE button to select “TREBLE”.
Within 5 seconds, press the VOLUME (+ or –) button to
adjust the treble.
Equalizer
CD
USB
When the EQUALIZER MODE button is pressed, the
current mode setting will be displayed. To change to a
different mode, press the EQUALIZER MODE button
repeatedly until the desired sound mode appears.
NNooeqeuqauliazalitzioanti.on.
For game.
FLAT
TAPE
For rock music.
GAME
CLASSIC
POPS
To turn the power on
For classical music.
For classical music.
The first time the unit is plugged in, the unit will enter the
For pop music.
For pop music.
demonstration mode.
Vocals are enhanced.
Vocals are enhanced.
VOCAL
JAZZ
1 Press the DEMO button to cancel the demonstration
For jazz.
For jazz.
mode.
2 Press the ON/STAND-BY button to turn the power on.
Auto power on function
When you press any of these buttons during stand-by
mode, the unit turns on.
Function
Main unit
Remote
control
Operation
●
/
button on the main unit : The unit turns on and
Power on /
off
Press to turn the
power on or to
go to stand-by
mode.
POWER
ON/STAND-BY
playback of the last function will start (iPod, CD,
TUNER, USB, TAPE, AUDIO IN).
● iPod button on the remote control : The unit turns on
and iPod function is activated.
● CD button on the remote control : The unit turns on and
CD function is activated.
● TUNER button on the remote control : The unit turns on
and TUNER function is activated.
____
Demo on /
off
Press to enter to
demonstration
on or off mode.
● USB button on the remote control : The unit turns on
and USB function is activated.
Display brightness control
● TAPE button on the remote control: The unit turns on
and TAPE function is activated.
● AUDIO IN button on the remote control : The unit turns
on and AUDIO IN function is activated.
To dim the display brightness, hold down the CLEAR/
DIMMER button on the remote control for 2 seconds or
more.
Volume auto fade-in
Auto power off function
If you turn off and on the main unit with the volume set to
27 or higher, the volume starts at 16 and fades in to the last
set level.
In the stop mode of disc, USB or tape operation, the main
unit enters the stand-by mode after 15 minutes of inactivity.
Volume control
Turn the volume knob toward VOL +/– (on main unit) or
press VOLUME +/– (on remote control) to increase or
decrease the volume.
X-Bass control
When the power is first turned on, the unit will enter the
extra bass mode which emphasizes the bass frequencies,
and “X-BASS” will appear. To cancel the extra bass mode,
press the X-BASS button on the remote control.
E-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the iPod
Supported iPod models:
●
●
●
iPod nano (software 1.2 above)
iPod mini (software 1.2 above)
MINI COMPONENT SYSTEM
CD-DH899
iPod (5th generation) (software 1.3 above) (Dock connector equipped
Click Wheel model)
POWER
ON/STAND-BY
FUNCTION
POWER
ON/STAND-BY
●
iPod (4th generation) (software 3.0.2 above) (Dock connector
equipped Click Wheel model)
VOL
●
●
iPod nano (2nd generation) (software 1.0.0 above)
iPod nano (3rd generation) (software 1.0.3 above)
●
●
●
●
iPod nano (4th generation) (software 1.0.3 above)
iPod classic (software 1.0.3 above)
iPod touch (software 1.1 above)
iPod touch (2nd generation) (software 2.1 above)
Caution:
Please update your iPod unit to the latest software version from Apple’s
homepage before using it.
CD
USB
iPod adaptor connection
Notes:
●
●
iPhone is not supported by this system.
You can use an audio cable to connect your iPod to the AUDIO IN
jack if:
TAPE
1. your iPod adaptor does not fit into the iPod dock on the main unit.
2. you have an iPod that does not have an iPod adaptor.
3. you have an iPod that does not have an iPod 30 pin connector.
To remove iPod adaptor
Insert the tip of a screwdriver (“–” type, small) into the iPod adaptor hole
as shown and lift upward to remove.
To insert iPod adaptor
1
2
Press the ON/STAND-BY button to turn the power on.
Insert the iPod adaptor into the iPod dock and connect your iPod.
iPod (bottom)
iPod
Dock connector
To disconnect iPod
Simply remove the iPod from the iPod dock. It is safe to do so even during
playback.
iPod adaptor
(not supplied)
Navigating the iPod menus
1
2
Press the MENU button to view the menu on iPod unit. Press it
again to go back to previous menu.
iPod dock
iPod connector
Use the TUNING ( or
) button on the remote control to select
an item on the menu and then press ENTER button.
Note:
When navigating the iPod menus with remote control, do not operate any
of the buttons on the iPod unit. The volume level is adjusted by pressing
the VOL (+ or –) button on the main unit or the remote control. Adjusting
the volume on the iPod unit gives no effect.
iPod playback
1
2
Press the ON/STAND-BY button to turn the power on.
iPod operation:
Press the iPod button on the remote control or FUNCTION button
repeatedly on the main unit to select iPod function.
The operations described below depend on the generation iPod you are
using.
3
4
Insert iPod unit in iPod dock of main unit.
System on operation:
When the main unit is powered on, the iPod unit will automatically power
on when docked in the unit (including TIMER function/exclude USB
function).
Press the
/
button to start playback.
Notes:
●
Once the iPod is connected to the unit it will begin charging.
The iPod unit cannot be charged while the main unit is in the stand-
by mode or during USB mode.
Please make sure to set iPod unit to either NTSC or PAL to match
System off (stand-by operation):
When the main unit is turned to stand-by mode, the docked iPod unit will
automatically turn to stand-by mode.
●
●
your TV signal. Please visit Apple’s homepage for further information.
E-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the iPod (continued)
Listening to a CD or MP3/WMA disc
Watching videos on a TV connected to
iPod
MINI COMPONENT SYSTEM
CD-DH899
1
2
Press the DISPLAY (TV OUT) button for more than 2 seconds.
“TV DISP” will appear on display.
POWER
ON/STAND-BY
FUNCTION
POWER
ON/STAND-BY
Press the ENTER button to start playback.
VOL
Notes:
●
If the TV Out setting is already turned on at video menu, the
video is automatically displayed on the TV screen when
ENTER key is pressed.
●
To return to watching video on iPod screen, press the MENU
button to enter video menu. Then press the DISPLAY (TV
OUT) button for more than
2
seconds until “iPodDISP”
appears.
●
During iPod video playback, pressing the DISPLAY (TV OUT)
button will not toggle video out display between iPod and TV.
CD
USB
iPod playback detection function:
Once the play button on the iPod unit is pressed, the main unit will
automatically change to iPod function overriding the previous
function selected.
Caution:
TAPE
●
Unplug all accessories for the iPod before inserting it into the
iPod dock.
●
Stop button ( ) at main unit is invalid during iPod function.
Various iPod functions
Function
Main
unit
Remote
control
Operation
Disc playback
1
2
Press the ON/STAND-BY button to turn the power on.
Play
Press in the pause mode.
Press the CD button on the remote control or FUNCTION
button repeatedly on the main unit to select CD function.
Pause
Press in the playback
3
4
5
6
Press the OPEN/CLOSE button to open the disc tray.
Place the disc on the disc tray, label side up.
mode.
Press the OPEN/CLOSE button to close the disc tray.
____
Track up/
down
Press in the playback or
pause mode.
Press the
/
(CD
/
) button to start playback. After the
If you press the button in
the pause mode, press the
last track is played, the unit will stop automatically.
/
button to start the
Notes for CD or MP3/WMA disc:
●
desired track.
When the end of the last track is reached during fast forward,
“END” will appear on the display and CD operation will be
paused. When the beginning of the first track is reached
during fast reverse, the unit will enter the playback mode (only
for CD).
____
____
Fast
forward/
reverse
Press and hold down in the
playback mode.
Release the button to
resume playback.
●
Rewritable multi-session discs with unfinished writing, can
still be played.
Display
iPod back light ON.
Press for more than 2
seconds to toggle the video
out display between iPod or
TV.
Press to toggle repeat
mode.
Various disc functions
Function
Main
unit
Remote
control
Operation
____
____
____
____
Repeat
Shuffle
Pause
Press in the playback
Press and hold down to
toggle shuffle mode.
mode. Press the
/
button to resume playback
from the paused point.
iPod
Menu
Press to view the iPod
menu during iPod function.
Track up/
down
Press in the playback or
stop mode.
If you press the button in
the stop mode, press the
____
____
iPod
Enter
Press to confirm the
selection.
/
button to start the
desired track.
Press and hold down in the
playback mode.
____
iPod
Cursor
Up/Down
Press to select the iPod
menu.
Fast
forward/
reverse
Release the button to
resume playback.
E-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to a CD or MP3/WMA disc (continued)
Direct track search
Random play
By using the Direct Search buttons, the desired tracks on
the current disc can be played.
The tracks on the disc can be played in random order
automatically.
Use the Direct Search buttons on the remote control to
select the desired track while playing the selected
disc.
● The Direct Search buttons allow you to select up to
number 9.
To random play all tracks:
Press and hold down PLAY MODE button on the remote
control until “RANDOM” appears. Press the
button.
/
(CD / )
To cancel random play:
● When selecting number 10 or higher, use the “10+”
Press and hold the PLAY MODE button until “NORMAL”
appears and “R” disappears.
button.
A. For example, to choose 13
1
2
3
Press the “10+” button once.
Press the “1” button.
Selected track number
Press the “3” button.
Notes:
● If you press the
B. For example, to choose 130
button during random play, you can
move to the track selected next by the random
operation. On the other hand, the button does not allow
you to move to the previous track. The beginning of the
track being played will be located.
● In random play, the unit will select and play tracks
automatically. (You cannot select the order of the
tracks.)
1
2
3
4
Press the “10+” button twice.
Press the “1” button.
Press the “3” button.
Press the “0” button.
Notes:
Caution:
● A track number higher than the number of tracks on the
disc cannot be selected.
● During random play, direct search is not possible.
After performing repeat play, be sure to press the (CD
button. Otherwise, the disc will play continuously.
)
To stop playback:
Press the (CD ) button.
Programmed play (CD)
1
2
While in the stop mode, press the MEMORY button on
the remote control to enter the programing save mode.
Repeat play
Repeat play can play one track, all tracks or a programmed
sequence continuously.
To repeat one track:
Press the PLAY MODE button repeatedly until “1-
REPEAT” appears. Press the
Press the
or
buttons on the remote control to
select the desired track.
/
(CD / ) button.
To repeat all tracks:
Press the PLAY MODE button repeatedly until “ALL
REPEAT” appears. Press the
/
(CD / ) button.
To repeat desired tracks:
Selected track number
Perform steps 1 - 5 in “Programmed play” section on pages
6 - 7 and then press the PLAY MODE button repeatedly
until “ALL REPEAT” appears.
3
4
Press the MEMORY button to save the track number.
To cancel repeat play:
Press the PLAY MODE button repeatedly until “NORMAL”
appears and “
” disappears.
Repeat steps 2 - 3 for other tracks. Up to 32 tracks can
be programmed. If you want to check the programmed
tracks, press the MEMORY button repeatedly. If you
make
a
mistake, the programmed tracks can be
cleared by pressing the CLEAR/DIMMER button.
5
Press the (CD / ) button to start playback.
/
E-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to a CD or MP3/WMA disc (continued)
Programmed play (MP3/WMA)
Procedure to playback MP3/WMA disc
with folder mode on
1
2
While in the stop mode, press the MEMORY button to
enter the programing save mode.
To play back CD-R/RW.
1
Press the CD button, and load an MP3/WMA disc.
After disc is loaded, disc info will be displayed.
MP3 indicator
Press the TUNING ( or ) button on the remote
control to select the desired folder.
WMA indicator
Disc
Name
TOTAL indicator
Total number of
files
Total number
of folder
Then press the
or
button on the remote
control to select the desired tracks.
2
Press the FOLDER button, and press the TUNING (
or button on the remote control to select desired
)
playback folder. (Folder mode on)
FOLDER
indicator
3
4
5
Press the MEMORY button to save the folder and
track number.
First track
number in the
folder
FOLDER
number
Repeat steps 2 – 3 for other folder/tracks. Up to 32
tracks can be programmed.
3
4
Select desired file to be played back by pressing the
Press the
/
(CD / ) button to start playback.
or
button.
To cancel the programmed play mode:
During programmed stop mode, press the
button. The display will show “MEM CLEAR” and all the
programmed contents will be cleared.
Press the
file name will be displayed.
/
(CD / ) button. Playback will start and
(CD
)
● Title, Artist and Album name are displayed if they
are recorded on the disc.
Adding tracks to the program:
● In case of playback with the folder mode on, press
the TUNING ( or ) button on the remote control,
and the folder can be selected even though it is in
playback/pause mode. It will continue playback/
pause mode in the 1st track of the selected folder.
If a program has been previously stored, the “MEMORY”
indicator will be displayed. Then follow steps 1 - 3 to add
tracks. The new tracks will be stored after the last track of
the previous program.
Notes:
● Display content can be changed by pressing the
DISPLAY button.
● When a disc is ejected, the program is automatically
canceled.
● If you press the ON/STAND-BY button to enter the
stand-by mode or change the function from CD to
another, the programmed selections will be cleared.
● During the program operation, random play is not
possible.
File name display
Album display
Title display
Artist display
Note:
If “NO SUPPORT” is displayed, it means “Copyright
protected WMA file” or “Not supported playback file” is
selected.
E-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to USB mass storage device/MP3 player
3
Select desired file to be played back by pressing the
button.
or
FUNCTION
P
OWER
O
N
/
S
T
A
N
D
-
B
Y
VOL
4
Press the
name will be displayed.
/
(USB
/
) button. Playback will start and the file
PUSH
OPEN
●
Title, Artist and Album name are displayed if they are recorded
in the USB memory device.
AUDIO IN
PHONES
●
Display content can be changed by pressing the DISPLAY
button.
To remove USB memory device
1
2
Press the
(USB ) button to stop playback.
Disconnect USB memory device from the USB terminal.
CD
USB
Notes:
●
SHARP will not be held liable for the loss of data while the USB
memory device is connected to the audio system.
●
●
This USB memory’s format supports FAT 16 or FAT 32.
SHARP cannot guarantee that all USB memory devices will work on
TAPE
this audio system.
●
USB cable is not recommended for use in this audio system to
connect to USB memory device. Use of the USB cable will affect the
performance of this audio system.
Note:
●
●
●
●
This USB memory cannot be operated via USB hub or external HDD-
storage.
The USB terminal in this unit is not intended for a PC connection but
is used for music streaming with a USB memory device.
If unplayable file is played on this product, “NO SUPPORT” is
indicated.
This product relates to USB mass storage devices and MP3 players.
It may however face some irregularities due to various unforeseen
reasons from some devices. Should this happen, turn off the unit and
then turn it on again.
The USB port is only intended for direct connection to a USB memory
device without any cable.
Playback order for MP3 files may differ depending on the writing
software used during file download.
Bitrate which is supported by MP3 is 32~320 kbps, WMA is 64~160
kbps.
Playlists are not supported on this unit.
This unit can display Folder Name or File Name up to 32 characters.
Folders with non playable files are also counted.
This USB mass storage device or MP3 player is not compatible with MTP
and AAC file systems.
To playback USB/MP3 player with folder
mode off
1
Press the USB button on the remote control or FUNCTION button
repeatedly on main unit to select USB function. Connect the USB
memory device that has MP3/WMA format files on the unit. When the
USB memory is connected to the main unit, the device information
will be displayed.
●
●
●
2
3
Select desired file to be played back by pressing the
button.
or
Press the
name will be displayed.
/
(USB
/
) button. Playback will start and the file
●
●
●
●
●
●
Title, Artist and Album name are displayed if they are recorded
in the USB memory device.
Display content can be changed by pressing the DISPLAY
button.
The display playback time may not be displayed correctly when
playing back a variable bitrate file.
Note:
To pause playback:
Press the (USB
●
●
The ID3TAG information supported are TITLE, ARTIST and ALBUM
only. Title name, artist name and album name can be displayed by
pressing the DISPLAY button during file playback or pause mode.
WMA meta tag also supports title, artist and album name which are
recorded in WMA files. Copyright protected WMA files cannot be
played back.
/
/
) button.
To playback USB/MP3 player with folder
mode on
1
2
Press the USB button on the remote control or FUNCTION button
repeatedly on main unit to select USB function. Connect the USB
memory device that has MP3/WMA format files on the unit. When the
USB memory is connected to the main unit, the device information
will be displayed.
The following functions are the same as CD operations:
Direct track search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Random play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Programmed play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Press the FOLDER button, and press the TUNING ( or ) button
on the remote control to select desired playback folder. To start
playback with folder mode on, go to step 4. To change the playback
Note:
If USB memory device is not connected, “NO MEDIA” will be shown on
the display.
folder, press the TUNING ( or
) button on the remote control to
select another folder.
E-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the radio
Memorising a station
You can store 40 AM and FM stations in memory and recall
MINI COMPONENT SYSTEM
CD-DH899
them at the push of a button. (Preset tuning)
POWER
ON/STAND-BY
FUNCTION
POWER
ON/STAND-BY
1
2
Perform steps 1 - 3 in “Tuning”.
VOL
Press the MEMORY button.
3
4
Within 30 seconds, press the PRESET ( or ) button
to select the preset channel number. Store the stations
in memory, in order, starting with preset channel 1.
CD
USB
Within 30 seconds, press the MEMORY button to store
that station in memory. If the “MEMORY” and preset
number indicators disappear before the station is
memorized, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a
preset station. When a new station is stored in the
memory, the station previously memorized for that
preset channel number will be erased.
TAPE
Note:
The backup function protects the memorized stations for a
few hours should there be a power failure or the AC power
cord become disconnected.
Tuning
1
2
Press the ON/STAND-BY button to turn the power on.
Press the FUNCTION button on the main unit or
TUNER (BAND) button on the remote control
repeatedly to select the desired frequency band (FM
stereo, FM mono or AM).
To recall a Memorized station
Press the PRESET ( or
) button for less than 0.5
seconds to select the desired station.
3
Press the TUNING ( or ) button to tune in to the
desired station.
To scan the preset stations
The stations saved in the memory can be scanned
automatically. (Preset memory scan)
Manual tuning:
Press the TUNING ( or ) button repeatedly to tune
in to the desired station.
1
Press the PRESET ( or ) button for more than 0.5
seconds. The preset number will flash and the
programmed stations will be tuned in sequentially, for 5
seconds each.
Auto tuning:
When the TUNING ( or ) button is pressed for more
than 0.5 seconds, scanning will start automatically and
the tuner will stop at the first receivable broadcast
station.
2
Press the PRESET ( or ) button again when the
desired station is located.
Notes:
● When radio interference occurs, auto scan tuning may
stop automatically at that point.
● Auto scan tuning will skip weak signal stations.
To erase entire preset memory
1
2
Press the ON/STAND-BY button to enter the stand-by
mode.
● To stop the auto tuning, press the TUNING ( or
)
button again.
While pressing down the FUNCTION button, press the
POWER ON/STAND-BY button until “TUNER CLEAR”
appears.
To receive an FM stereo transmission:
● Press the FUNCTION button on main unit or TUNER
(BAND) button on remote control repeatedly to select
stereo mode and “ST” indicator will be displayed. “
”
will appear when an FM broadcast is in stereo.
POWER
ON/STAND-BY
● If the FM reception is weak, press the TUNER (BAND)
button to extinguish the “ST” indicator. The reception
changes to monaural, and the sound becomes clearer.
E-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to a cassette tape
Note:
Tape playback
Tape recording function is not available in this unit.
1
2
Press the ON/STAND-BY button to turn the power on.
Before playback:
Press the FUNCTION button on main unit repeatedly
or TAPE button on remote control to select TAPE
function.
● For playback, use normal or low-noise
tapes for the best sound. (Metal or
CrO tapes are not recommended.)
2
V
O
L
V
O
L
3
Open the cassette door
by pushing the area
marked “ PUSH OPEN”.
● Do not use C-120 tapes or poor-quality
tapes, as they may cause malfunctions.
IN
A
U
D
IO
H
N
P
O
U
S
P
E
P
H
O
N
E
S
● Before loading a tape into the cassette
compartment, tighten the slack with a pen
or a pencil.
PUSH
OPEN
4
Load a cassette into the
cassette compartment.
MINI COMPONENT SYSTEM
CD-DH899
E
M
Y
S
T
T
S
E
N
99
O
N
O
M
P
I
C
M
I
N
CD
-DH8
O
P
O
W
E
R
A
N
D
-B
Y
O
N
/S
T
POWER
V
FUNCTION
POWER
ON/STAND-BY
N
L
ON/STAND-BY
VOL
IO
IN
A
U
D
P
H
O
N
E
S
PUSH
OPEN
AUDIO IN
5
Press the
/
(TAPE ) button to start playback.
PHONES
Various tape functions
Function
Main
unit
Remote
control
Operation
Tape
Press in the stop
playback
Stop
mode.
Press in the
CD
USB
playback, fast
forward or fast
rewind mode.
Fast
forward/
Fast rewind
____
Press in the
playback or stop
mode.
TAPE
TAPE
Caution:
● To remove the cassette, press the (TAPE ) button,
and then open the compartment.
● If a power failure occurs during tape operation, the tape
head will remain engaged with the tape and the
cassette door will not open. In this case, wait until the
power is restored.
E-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the clock (Remote control
only)
Timer and sleep operation (Remote
control only)
Once timer:
Once timer play works for one time only at a preset time.
Daily timer:
Daily timer play works at the same preset time every day.
For example, set the timer as a wake-up call every
morning.
Using the once timer and daily timer in combination:
For example, use the once timer to listen a radio program,
and use the daily timer to wake up.
CD
USB
1 minute or more
Once timer
Stop
Daily timer
Stop
TAPE
Start
Start
Timer playback
Before setting timer:
In this example, the clock is set for the 12-hour (AM 12:00)
display.
● Check that the clock is set to the correct time (refer to
page 11). If it is not set, you cannot use the timer
function.
1
2
3
Press the ON/STAND-BY button to turn the power on.
Press the CLOCK/TIMER button.
● For timer playback: Plug in USB or load disc/cassette
or dock iPod to be played.
Within 10 seconds, press the MEMORY button.
Press the
or
button to select 12-hour or
24-hour display and then press the MEMORY button.
1
Press the ON/STAND-BY button to turn the power on.
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
The 12-hour display will appear.
(AM 0:00 - PM 11:59)
The 24-hour display will appear.
(0:00 - 23:59)
2
3
Press and hold the CLOCK/TIMER button.
“AM 12:00”
Within 10 seconds, press the
or
button to
“AM 0:00”
select “ONCE SET” or “DAILY SET”, and press the
MEMORY button. Set the clock to the correct time if
“ONCE SET” or “DAILY SET” does not appear.
“0:00”
4
5
6
Within 10 seconds, press the
select “TIMER SET”, and press the MEMORY button.
or
button to
4
5
To adjust the hour, press the
then press the MEMORY button. Press the
button once to advance the time by 1 hour. Hold it
down to advance continuously.
or
button and
or
To adjust the hour, press the
press the MEMORY button.
or
button and then
To adjust the minutes, press the
and then press the MEMORY button. Press the
or button once to advance the time by 1 minute.
or
button
To adjust the minutes, press the
then press the MEMORY button.
or
button and
To confirm the time display:
Press the CLOCK/TIMER button. The time display will
appear for about 5 seconds.
7
Set the time to finish as in steps 5 and 6 above.
8
To select the timer playback source (CD, TUNER, USB,
iPod, TAPE or AUDIO IN), press the
or
button.
Note:
Press the MEMORY button.
When you select the tuner, select a station by pressing
the or button, and then press the MEMORY
button. If a station has not been programmed, “NO
PRESET” will be displayed and timer setting will be
canceled.
The “CLOCK” will appear or time will be displayed when
the AC power supply is restored after a power failure or
unplugging the unit. If incorrect, readjust the clock as
follows.
To readjust the clock:
Perform “Setting the clock” from step 1. If the “CLOCK”
does not appear in step 2, step 3 (for selecting the 12-hour
or 24-hour display) will be skipped.
9
Adjust the volume using the VOLUME control, and then
press the MEMORY button. Do not turn the volume up
too high.
To change the 12-hour or 24-hour display:
10 Press the ON/STAND-BY button to enter the power
stand-by mode. The “TIMER” indicator lights up and
the unit is ready for timer playback.
1
Clear all the programmed contents. [Refer to “Factory
reset, clearing all memory” on page 14 for details.]
2
Perform “Setting the clock” from step 1 onwards.
E-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer and sleep operation (Remote control only) (continued)
Reusing the memorized timer setting:
The timer setting will be memorized once it is entered. To
reuse the same setting, perform the following operations.
MINI COMPONENT SYSTEM
CD-DH899
1
2
Turn the power on and press and hold down the
CLOCK/TIMER button.
FUNCTION
POWER
ON/STAND-BY
Within 10 seconds, press the
or
button to
VOL
select “ONCE SET” or “DAILY SET”, and press the
MEMORY button.
PUSH
OPEN
3
4
Within 10 seconds, press the
select “TIMER ON”, and press the MEMORY button.
or
button to
11 When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the
preset volume. The “ ” indicator will blink during timer
playback.
Press the ON/STAND-BY button to enter the power
stand-by mode.
The “DAILY” indicator will blink during timer playback.
Sleep operation
12 When the timer end time is reached, the system will
The radio, compact disc, iPod and USB can all be turned
off automatically.
enter the power stand-by mode automatically.
Once timer:
The timer will be canceled.
1
2
3
Play back the desired sound source.
Daily timer:
Press the SLEEP button.
The timer operates at the same time every day. It will
continue until the daily timer setting is canceled. Cancel
the daily timer when it is not in use.
Within 10 seconds, press the SLEEP button repeatedly
to select the time.
10
20
30 ....... 80
90
4
5
“SLEEP” will appear.
Notes:
● When performing timer playback using another unit
connected to the USB terminal or AUDIO IN jack, select
“USB” or “AUDIO IN” in step 8.
● This unit will turn on or enter the power stand-by mode
automatically. However, the connected unit will not turn
on or off. To stop the timer playback, follow step
“Canceling the timer setting” of this page.
The unit will enter the power stand-by mode
automatically after the preset time has elapsed. The
volume will be turned down 1 minute before the sleep
operation finishes.
To confirm the remaining sleep time:
While “SLEEP” is indicated, press the SLEEP button.
1
Checking the timer setting:
To cancel the sleep operation:
1
Turn the power on and press and hold down the
CLOCK/TIMER button.
Press the ON/STAND-BY button while “SLEEP” is
indicated. To cancel the sleep operation without setting the
unit to the stand-by mode, proceed as follows.
2
Within 10 seconds, press the
select “ONCE SET” or “DAILY SET”, and press the
or
button to
1
2
While “SLEEP” is indicated, press the SLEEP button.
MEMORY button.
Within 10 seconds, press the SLEEP button repeatedly
to select “SLEEP 00”.
3
Within 10 seconds, press the
select “TIMER CALL”, and press the MEMORY button.
or
button to
Canceling the timer setting:
To use timer and sleep operation together
1
Turn the power on and press and hold down the
CLOCK/TIMER button.
Sleep and timer playback:
For example, you can fall asleep listening to the radio and
wake up to CD in the next morning.
2
Within 10 seconds, press the
or
button to
select “ONCE SET” or “DAILY SET”, and press the
MEMORY button.
1
2
Set the sleep time (see above, steps 1 - 5).
While the sleep timer is set, set the timer playback
(steps 2 - 9, page 11).
3
Within 10 seconds, press the
or
button to
select “TIMER OFF”, and press the MEMORY button.
Timer will be canceled (the setting will not be
canceled).
End
time
Sleep timer
Timer playback
setting
setting
Desired time
90 minutes
Sleep operation will
automatically stop
Timer playback
start time
E-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Enhancing your system
Troubleshooting chart
The connection cord is not included. Purchase
commercially available cord as shown below.
a
Many potential problems can be resolved by the owner
without calling a service technician.
If something is wrong with this product, check the following
before calling your authorized SHARP dealer or service
center.
Portable audio
player, etc.
General
Audio cable
Symptom
Possible cause
(not supplied)
● The clock is not set ● Did a power failure occur?
to the correct time.
Reset the clock. (Refer page
11)
MINI COMPONENT SYSTEM
CD-DH899
AUDIO IN
● When a button is
pressed, the unit
does not respond.
●
Set the unit to the power
stand-by mode and then turn
it back on.
FUNCTION
POWER
ON/STAND-BY
PHONES
VOL
● If the unit still malfunctions,
reset it. (Refer page 14)
PUSH
OPEN
AUDIO IN
● No sound is heard. ● Is the volume level set to
PHONES
“0”?
● Are the headphones
connected?
● Are the speaker wires
disconnected?
Listening to the playback sounds of
portable audio player, etc.
CD player
Symptom
Possible cause
1
Use a connection cord to connect the portable audio
● Playback does not ● Is the disc loaded upside
start.
● Playback stops in
the middle or is not
player etc. to the AUDIO IN jack. When using video
equipment, connect the audio output to this unit and
the video output to a television.
down?
● Does the disc satisfy the
standards?
performed properly. ● Is the disc distorted or
2
3
Press the ON/STAND-BY button to turn the power on.
scratched?
Press the AUDIO IN button on the remote control or
FUNCTION button repeatedly on main unit to select
AUDIO IN function.
● Playback sounds
are skipped, or
stopped in the
● Is the unit located near
excessive vibrations?
● Is the disc very dirty?
● Has condensation formed
inside the unit?
middle of a track.
4
Play the connected equipment. If volume level of the
connected device is too high, sound distortion may
occur. Should this happen, lower the volume of the
connected device. If volume level is too low, increase
the volume of the connected device.
Remote control
Symptom
Possible cause
Note:
● The remote control ● Is the AC power cord of the
To prevent noise interference, place the unit away from the
television.
does not operate.
unit plugged in?
● Is the battery polarity
correct?
● Are the batteries dead?
● Is the distance or angle
incorrect?
● Does the remote control
sensor receive strong light?
Headphones
● Do not turn the volume on to full at switch on and listen
to music at moderate levels. Excessive sound pressure
from earphones and headphones can cause hearing
loss.
● Before plugging in or unplugging the headphones,
reduce the volume.
Tuner
● Be sure your headphones have a 1/8" (3.5 mm)
diameter plug and impedance between 16 and 50
ohms. The recommended impedance is 32 ohms.
● Plugging in the headphones disconnects the speakers
automatically. Adjust the volume using the VOLUME
control.
Symptom
Possible cause
● The radio makes
unusual noises
continuously.
● Is the unit placed near the
TV or computer?
● Is the FM antenna or AM
loop antenna placed
properly? Move the antenna
away from the AC power
cord if it is located nearby.
E-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting chart (continued)
Cassette deck
If problem occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply voltage
due to lightning, etc.) or if it is operated incorrectly, it may malfunction.
Symptom
Possible cause
Is there any slack?
Is the tape stretched?
Are the capstans, pinch rollers or
heads dirty?
●
●
●
Sound skipping.
Cannot hear treble.
Sound Fluctuation.
●
●
●
If such a problem occurs, do the following:
1
2
Set the unit to the stand-by mode and turn the power on again.
●
Cannot remove the tape.
●
If a power failure occurs during
playback, the heads remain
engaged with the tape. Do not open
the compartment with great force.
If the unit is not restored in the previous operation, unplug and plug
in the unit again, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
USB
Symptom
Possible cause
Factory reset, clearing all memory
●
●
Device cannot be
detected.
●
Is there any MP3/WMA file
available?
●
●
●
Is the device properly connected?
Is it an MTP device?
Does the device contain AAC file
only?
1
2
Press the ON/STAND-BY button to enter the power stand-by mode.
While pressing down the OPEN/CLOSE button, press the POWER
ON/STAND-BY button until “ALL CLEAR” appears.
Playback does not start.
●
Is it a copyright protected WMA
file?
Is it a false MP3 file?
POWER
ON/STAND-BY
●
●
●
●
Wrong time display.
Wrong file name display.
Is Variable Bitrate file being played
back?
Is the File Name written in
Chinese or Japanese characters?
Caution:
●
This operation will erase all data stored in memory including clock, timer
settings, tuner preset, and CD program.
Care of compact discs
iPod
Compact discs are fairly resistant to damage, however mistracking can
occur due to an accumulation of dirt on the disc surface. Follow the
guidelines below for maximum enjoyment from your CD collection and
player.
Symptom
Possible cause
●
No sound is produced.
No image appears on the
TV/monitor.
●
●
The iPod is not playing.
The iPod is not properly
connected to the unit.
Is the AC power cord of the unit
plugged in?
The video cable is not properly
connected.
●
●
●
Do not write on either side of the disc, particularly the non-label side
from which signals are read. Do not mark this surface.
Keep your discs away from direct sunlight, heat and excessive
moisture.
Always hold the CDs by the edges. Fingerprints, dirt or water on the
CDs can cause noise or mistracking. If a CD is dirty or does not play
properly, clean it with a soft, dry cloth, wiping straight out from the
center, along the radius.
●
●
●
The TV/monitor’s input selection is
not properly set.
●
iPod will not charge.
●
●
Wrong iPod adaptor is used.
The iPod is not making full contact
with the iPod connector.
●
●
The main unit is in stand-by mode.
Using 3rd generation iPod.
Maintenance
Cleaning the cabinet
Condensation
Periodically wipe the cabinet with a soft cloth and a diluted soap solution,
then with a dry cloth.
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet (CD
pickup, etc.) or on the transmitter on the remote control. Condensation
can cause the unit to malfunction. If this happens, leave the power on with
no disc in the unit until normal playback is possible (about 1 hour). Wipe
off any condensation on the transmitter with a soft cloth before operating
the unit.
Caution:
●
Do not use chemicals for cleaning (gasoline, paint thinner, etc.). It
may damage the cabinet.
●
Do not apply oil to the inside of the unit. It may cause malfunctions.
Cleaning the CD pickup lens
Before transporting the unit
In order to ensure proper operation of the CD player, preventative
maintenance (cleaning of the laser pickup lens) should be performed
periodically. Lens cleaners are commercially available. Contact your local
CD software dealer for options.
Remove the iPod, USB memory device and disc from the unit. Then, set
the unit to the power stand-by mode. Carrying the unit with iPod or USB
memory device left docked or discs left inside can damage the unit.
E-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification
changes for product improvement without prior notice. The
performance specification figures indicated are nominal
values of production units. There may be some deviations
from these values in individual units.
USB
USB host interface ● Complies with USB 1.1 (Full
Speed)/ 2.0 Mass Storage
Class.
●
Support Bulk only and CBI
protocol.
General
Support file
Bitrate support
Other
● MPEG 1 Layer 3
Power source
AC 120 V ~ 60 Hz
72 W
● WMA (Non DRM)
● MP3 (32 ~ 320 kbps)
● WMA (64 ~ 160 kbps)
Power
consumption
Dimensions
Width: 9 - 7/16" (240 mm)
Height: 12 - 7/16" (315.5 mm)
Depth: 11 - 5/32" (283.2 mm)
● Maximum total number of
MP3/WMA files is 1024.
● Maximum total number of
folders is 255 INCLUSIVE of
root directory.
Weight
13.32 lbs. (6.04 kg)
● The
ID3TAG
information
Amplifier
supported are TITLE, ARTIST
and ALBUM only.
Supports ID3TAG version
and version 2.
Output power
PMPO:4200 watts
RMS: Total 300 watts
●
●
1
(150 watts per channel into 4
ohms at 1 kHz, 10% total
harmonic distortion)
File system
support
Support USB devices with
Microsoft Windows/DOS/FAT
12/ FAT 16/ FAT 32.
FTC: 120 watts minimum RMS per
channel into 4 ohms from
100 Hz to 20 kHz, 10% total
harmonic distortion.
● 2 kbyte block length for sector.
Output terminals Speakers: 4 ohms
Headphones: 16 - 50 ohms
Tuner
(recommended: 32 ohms)
Frequency range
FM: 87.5 - 108.0 MHz
AM: 530 - 1,720 kHz
Video output : 1 Vp-p
Input terminals
Audio In (audio signal):
250 mV/47 k ohms
Speaker
Type
2-way type speaker system
2" (5 cm) tweeter
6-5/16" (16 cm) woofer
CD player
Type
Single disc multi-play compact disc
Maximum input
power
300 W
player
Signal readout
Non-contact, 3-beam
semiconductor laser pickup
Rated input power 150 W
Impedance
Dimensions
4 ohms
D/A converter
Multi bit D/A converter
Width: 7-7/8" (200 mm)
Height: 13" (330 mm)
Depth: 8-11/16" (220.5 mm)
Frequency
response
20 - 20,000 Hz
Dynamic range
90 dB (1 kHz)
Weight
6.8 lbs. (3.1 kg)/each
Cassette deck
Frequency
50 - 14,000 Hz (normal tape)
response
Signal/noise
50 dB (playback)
ratio
Wow and flutter 0.35% (WRMS)
Tape Speed
Heads
4.76 cm/sec. (1 - 7/8 ips)
Playback
E-15
Download from Www.Somanuals.com. All Manuals Search And Download.
|