Sony Camcorder 4 132 761 121 User Manual

Click  
Handycam Handbook  
DCR-SX30E/SX31E/SX40E/SX41E/SX50E/  
SX60E  
2009 SDoonwynCloorapdofrraotmionWww.Somanuals.com. All Manuals Search A4n-d13D2o-7w6n1lo-1a2d(.1)  
GB  
Table of contents  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Useful recording techniques  
Checking your golf  
swing  
Getting a good shot  
of a ski slope or  
beach  
SPORTS......................................................77  
Backlight...................................................ꢁ0  
BEACH........................................................77  
SNOW........................................................77  
Flowers in close-up  
A child on the stage  
under a spot light  
PORTRAIT...................................................77  
SPOTLIGHT.................................................77  
FOCUS........................................................7ꢄ  
TELE.MACRO...............................................7ꢃ  
Focusing on the dog  
on the left side of  
the screen  
Fireworks with all its  
splendor  
FOCUS........................................................7ꢄ  
FIREWORKS................................................77  
FOCUS........................................................7ꢄ  
SPOT.FOCUS...............................................7ꢃ  
SPOT.MTR/FCS...........................................7ꢂ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Parts and controls  
Attach a tripod (sold separately) to the  
tripod receptacle using a tripod screw (sold  
separately: the length of the screw must be less  
than 5.5 mm (7/32 in.)).  
Figures in ( ) are reference pages.  
BATT (battery) release lever (16)  
START/STOP button (21, 27)  
Hook for a shoulder belt  
A/V Remote Connector (39, 53)  
Lens (Carl Zeiss lens) (14)  
LENS COVER switch (20, 22, 26, 28)  
Built-in microphone  
If you rotate the LCD panel 180 degrees, you  
can close the LCD panel with the LCD screen  
facing out. This is convenient during playback  
operations.  
Power zoom lever (30, 37)  
PHOTO button (23, 28)  
(Movie)/ (Photo) lamps (17)  
POWER button (17)  
EASY button (21)  
RESET button  
Press RESET to initialize all the settings  
including the clock setting.  
Tripod receptacle  
(Backlight) button (30, 85)  
DISP (display) button (31)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
   
Upper right  
Indicator  
Speaker  
(DISC BURN) button (see Operating  
Meaning  
Recording mode (HQ/SP/  
Recording/playback/  
editing media (55)  
Counter (hour:minute:  
Estimated recording  
remaining time (20, 26)  
Guide)  
“Memory Stick Duomedia slot (56)  
Access lamp (Internal memory, “Memory  
Stick PRO Duomedia) (56)  
While the lamp is lit or flashing, the  
0:00:00  
camcorder is reading or writing data.  
[00min]  
(USB) jack* (52)  
DCR-SX30E/SX31E/SX50E: Output only  
*
Approximate number of  
recordable photos and  
recording media (23, 28)  
9999  
9999  
Screen indicators  
Upper left  
Center  
Upper right  
Playback folder (34)  
Current playing movie or  
photo/Number of total  
recorded movies or photos  
100/112  
Bottom  
Indicator  
Meaning  
Bottom  
Manual focus (76)  
Upper left  
Indicator  
Meaning  
SCENE SELECTION (77)  
HOME button (9)  
Self-timer recording (80)  
BLT-IN ZOOM MIC (79)  
MICREF LEVEL low (80)  
Remaining battery  
White balance (78)  
SteadyShot off (61)  
EXPOSURE (76)/SPOT  
TELE MACRO (75)  
Backlight (30)  
60 min  
Return button (9)  
Center  
OPTION button (9)  
Indicator  
Meaning  
VIEW IMAGES button  
Slide show button (38)  
Data file name (25, 33)  
Protected image (46)  
[STBY]/[REC]  
Recording status (21, 27)  
Slide show set (38)  
101-0001  
101-0005  
Warning (85)  
VISUAL INDEX button  
Playback mode (24, 33)  
Indicators and their positions are approximate  
and may differ from what you actually see.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using the HELP function  
HOMEand  
To see the descriptions on the HOME  
MENU, touch (HELP) on the HOME  
MENU screen. (The bottom of turns  
orange.) Then, touch the item you want to  
know about.  
OPTION- Taking  
advantage of two  
types of menus  
Using the OPTION MENU  
Using the HOME MENU  
The OPTION MENU appears just like  
the pop-up window that appears when you  
right-click the mouse on a computer. The  
menu items you can change in the context  
appear.  
When you touch (HOME), the HOME  
MENU appears. You can change the  
settings of your camcorder, etc.  
(HOME)  
(OPTION)  
Touch the desired category  
the menu item to be changed.  
Touch the desired tab the  
item to change the setting.  
Menu item  
Menu item  
Category  
Tab  
Follow the instructions on the  
screen.  
After completing the setting,  
touch  
.
After completing the setting,  
touch  
.
When the item is not on the screen, touch  
/
.
To return to the previous screen, touch  
.
To hide the HOME MENU screen, touch  
.
You cannot select the grayed items or  
settings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Notes  
When the item you want is not on the screen,  
touch another tab. (There may be no tab.)  
You cannot use the OPTION MENU during  
Easy Handycam operation.  
The tabs and items that appear on the screen  
depend on the recording/playback status of  
your camcorder at the time.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
(MANAGE MEDIA) category  
MOVIE MEDIA SET*  
PHOTO MEDIA SET*  
MEDIA INFO  
MEDIA FORMAT*  
REPAIR IMG.DB F.  
Menu lists  
List of the HOME MENU  
(CAMERA) category  
MOVIE*  
PHOTO*  
(SETTINGS) category  
MOVIE SETTINGS  
REC MODE  
(VIEW IMAGES) category  
VISUAL INDEX*  
FILM ROLL*  
FACE*  
PLAYLIST  
WIDE SELECT  
DIGITAL ZOOM  
STEADYSHOT  
AUTO SLW SHUTTR  
GUIDEFRAME  
REMAINING SET  
FACE SET*  
(OTHERS) category  
DELETE*  
DELETE  
PHOTO SETTINGS  
IMAGE SIZE*  
DELETE  
PHOTO CAPTURE  
MOVIE DUB  
DUB by select  
DUB by date  
DUB ALL  
FILE NO.  
AUTO SLW SHUTTR  
GUIDEFRAME  
VIEW IMAGES SET  
DATA CODE  
PHOTO COPY  
COPY by select  
COPY by date  
EDIT  
SOUND/DISP SET  
VOLUME*  
BEEP*  
LCD BRIGHT  
DELETE  
LCD BL LEVEL  
LCD COLOR  
DELETE  
PROTECT  
OUTPUT SETTINGS  
TV TYPE  
PROTECT  
DIVIDE  
DISP OUTPUT  
CLOCK/ LANG  
CLOCK SET*  
PLAYLIST EDIT  
ADD  
ADD by date  
ERASE  
AREA SET  
SUMMERTIME  
LANGUAGE SET*  
GENERAL SET  
DEMO MODE  
CALIBRATION  
A.SHUT OFF  
ERASE ALL  
MOVE  
USB CONNECT  
USB CONNECT  
USB CONNECT  
DISC BURN  
Operating Guide  
POWER ON BY LCD  
BATTERY INFO  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
   
[SOUND/DISP SET] is changed to [SOUND  
SETTINGS] during Easy Handycam operation.  
* You can set this item during Easy Handycam  
operation.  
List of the OPTION MENU  
Following items are available on the  
OPTION MENU only.  
tab  
SPOT MTR/FCS  
SPOT METER  
SPOT FOCUS  
TELE MACRO  
EXPOSURE  
FOCUS  
SCENE SELECTION  
WHITE BAL.  
tab  
tab  
FADER  
BLT-IN ZOOM MIC  
MICREF LEVEL  
SELF-TIMER  
The tab depends on the situation/no tab  
SLIDE SHOW  
SLIDE SHOW SET  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1ꢀ  
 
Do not do any of the following when the  
(Movie)/ (Photo) lamps (p. 17) or the access  
lamp (p. 56) are lit or flashing. Otherwise, the  
recording media may be damaged, recorded  
images may be lost or other malfunctions could  
occur.  
Ejecting the “Memory Stick PRO Duo” media  
from the camcorder  
Removing the battery pack or AC Adaptor  
from the camcorder  
Read this before  
operating your  
camcorder  
Supplied items  
The numbers in ( ) are the supplied  
quantity.  
AC Adaptor (1)  
Applying mechanical shock or vibration to  
the camcorder  
Power cord (Mains lead) (1)  
A/V connecting cable (1)   
USB cable (1)   
Rechargeable battery pack NP-FH30 (1)  
CD-ROM “Handycam Application  
When connecting your camcorder to another  
device with a cable, be sure to insert the  
connector plug in the correct way. Pushing the  
plug forcibly into the terminal will damage the  
terminal and may result in a malfunction of  
your camcorder.  
Disconnect the AC Adaptor from the  
camcorder, holding both the camcorder and the  
DC plug.  
Software” (1)  
“PMB” (software, including “PMB Guide” )  
“Handycam Handbook” (PDF)  
“Operating Guide” (1)  
Menu items, LCD panel, and lens  
A menu item that is grayed out is not available  
under the current recording or playback  
conditions.  
See page 55 for the “Memory Stick” media you  
can use with this camcorder.  
The LCD screen is manufactured using  
extremely high-precision technology, so over  
99.99% of the pixels are operational for effective  
use. However, there may be some tiny black  
points and/or bright points (white, red, blue,  
or green in color) that appear constantly on the  
LCD screen. These points are normal results of  
the manufacturing process and do not affect the  
recording in any way.  
Using the camcorder  
Do not hold the camcorder by the following  
parts, and also do not hold the camcorder by  
the jack covers.  
LCD.screen  
Battery.pack  
Black points  
White, red, blue or green points  
Exposing the LCD screen, or the lens to direct  
sunlight for long periods of time may cause  
malfunctions.  
The camcorder is not dustproofed, dripproofed  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1ꢁ  
 
Do not aim at the sun. Doing so might cause  
your camcorder to malfunction. Take images  
of the sun only in low light conditions, such as  
at dusk.  
Note on disposal/transfer  
Even if you perform [ DELETE ALL],  
[
DELETE ALL] or [MEDIA FORMAT],  
some data might not be entirely deleted from  
the internal memory. When you transfer the  
camcorder, it is recommended that you perform  
About changing the language setting  
The on-screen displays in each local language  
are used for illustrating the operating  
procedures. Change the screen language before  
using your camcorder if necessary (p. 18).  
[
EMPTY] (p. 59) to prevent the recovery  
of your data. Also, when you dispose of the  
camcorder, it is recommended that you destroy  
the actual body of the camcorder.  
Recording  
If you cannot record/play back images,  
perform [MEDIA FORMAT]  
Before starting to record, test the recording  
function to make sure that the image and sound  
are recorded without any problems.  
Compensation for the contents of recordings  
cannot be provided, even if recording or  
playback is not possible due to a malfunction of  
the camcorder, storage media, etc.  
TV color systems differ depending on the  
country/region. To view your recordings on a  
TV, you need a PAL system-based TV.  
Television programs, films, video tapes,  
and other materials may be copyrighted.  
Unauthorized recording of such materials may  
be contrary to the copyright laws.  
If you repeat recording/deleting images for  
a long time, fragmentation of data occurs on  
the recording media. Images cannot be saved  
or recorded. In such a case, save your images  
on some type of external media first (p. 50,  
see Operating Guide too), and then perform  
[MEDIA FORMAT] (p. 58).  
Carl Zeiss lens  
Your camcorder is equipped with a Carl Zeiss  
lens, which was developed jointly by Carl Zeiss,  
in Germany, and Sony Corporation, and produces  
superior images. It adopts the MTF measurement  
system for video cameras and offers a quality  
typical of a Carl Zeiss lens.  
MTF= Modulation Transfer Function. The  
number value indicates the amount of light from a  
subject coming into the lens.  
Save all your recorded image data  
To prevent your image data from being lost,  
save all your recorded images on external media  
periodically. It is recommended that you save  
the image data on a disc such as a DVD-R using  
your computer (see Operating Guide). Also, you  
can save your image data using a DVD writer, a  
VCR, or a DVD/HDD recorder (p. 50).  
Notes on battery pack/AC Adaptor  
Be sure to remove the battery pack or the AC  
Adaptor after turning off the camcorder.  
When the camcorder is connected to a  
computer  
Do not try to format the media of the  
camcorder using a computer. If you do so, your  
camcorder may not operate correctly.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1ꢂ  
 
Getting started  
Step 1: Charging the battery pack  
CHG (charge) lamp  
DC plug  
DC IN jack  
To the wall outlet  
(wall socket)  
AC Adaptor  
Power cord (Mains lead)  
Battery pack  
You can charge the “InfoLITHIUM” battery pack (H series) after attaching it to your  
camcorder.  
You cannot attach any “InfoLITHIUM” battery pack other than the H series to your camcorder.  
Turn off your camcorder by closing the LCD screen.  
1
Attach the battery pack by sliding it in the direction of the arrow until it  
clicks.  
2
Connect the AC Adaptor and the power cord (mains lead) to your  
camcorder and the wall outlet (wall socket).  
Be sure that the mark on the DC plug is facing down.  
The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off  
when the battery pack is fully charged.  
3
When the battery is charged, disconnect the AC Adaptor from the DC IN  
jack of your camcorder.  
4
See page 88 on recording and playing time.  
When your camcorder is on, you can check the approximate amount of remaining battery power with the  
remaining battery indicator at the upper left on the LCD screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1ꢃ  
     
Charging time  
Approximate time (min.) required when you fully charge a fully discharged battery pack.  
Battery pack  
NP-FH30 (supplied)  
NP-FH50  
NP-FH70  
NP-FH100  
Charging time  
115  
135  
170  
390  
When the battery pack is charged at 25 C (77 ˚F) (10 C to 30 C (50 ˚F to 86 ˚F) is recommended)  
To remove the battery pack  
Close the LCD screen. Slide the BATT (battery) release lever and remove the battery pack  
.  
To use a wall outlet (wall socket) as a power source  
Make the same connections as “Step 1: Charging the battery pack.” Even if the battery pack is  
attached, the battery pack is not discharged.  
Charging the battery pack abroad  
You can charge the battery pack in any countries/regions using the AC Adaptor supplied with  
your camcorder within the AC 100 V - 240 V, 50 Hz/60 Hz range.  
Do not use an electronic voltage transformer.  
Notes on the battery pack  
When you remove the battery pack or disconnect the AC Adaptor, close the LCD screen and make sure  
that the  
(Movie)/ (Photo) lamps (p. 17) are turned off.  
The CHG (charge) lamp flashes during charging under the following conditions:  
The battery pack is not attached correctly.  
The battery pack is damaged.  
In the default setting, the power turns off automatically if you leave your camcorder without any  
operation for about 5 minutes, to save battery power ([A.SHUT OFF] p. 72).  
Notes on the AC Adaptor  
Use the nearby wall outlet (wall socket) when using the AC Adaptor. Disconnect the AC Adaptor from  
the wall outlet (wall socket) immediately if any malfunction occurs while using your camcorder.  
Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture.  
Do not short-circuit the DC plug of the AC Adaptor or battery terminal with any metallic objects. This  
may cause a malfunction.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1ꢄ  
     
Step 2: Turning the power on, and setting the  
date and time  
Open the LCD screen of your camcorder.  
1
Your camcorder is turned on.  
To turn on your camcorder when the LCD screen is open, press POWER.  
POWER button  
(Movie): To record movies  
(Photo): To record photos  
Select the desired geographical area with  
/
, then touch [NEXT].  
2
3
Touch the button on  
the LCD screen.  
To set the date and time again, touch  
(HOME)   
(SETTINGS) [CLOCK/ LANG]   
[CLOCK SET]. When an item is not on the screen, touch  
/
until the item appears.  
Set [SUMMERTIME], date and time, then touch  
.
The clock starts.  
If you set [SUMMERTIME] to [ON], the clock advances 1 hour.  
The date and time does not appear during recording, but they are automatically recorded on the  
recording media, and can be displayed during playback. To display the date and time, touch (HOME)  
(SETTINGS) [VIEW IMAGES SET] [DATA CODE] [DATE/TIME]   
.
You can turn off the operation beeps by touching  
SET] [BEEP] [OFF]   
(HOME)   
(SETTINGS) [SOUND/DISP  
.
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
         
If the button you touch does not react correctly, calibrate the touch panel (p. 96).  
To turn off the power  
Close the LCD screen. The (Movie) lamp flashes for a few seconds and the power is turned  
off.  
POWER button  
You can turn off your camcorder also by pressing POWER.  
When [POWER ON BY LCD] (p. 73) is set to [OFF], turn off your camcorder by pressing POWER.  
Changing the language setting  
You can change the on-screen displays to show messages in a specified language.  
Touch (HOME)   
a desired language   
(SETTINGS) [CLOCK/ LANG] [ LANGUAGE SET]   
.
Download from Www.Somanuals.com. All Manuals Search And Download.  
1ꢅ  
   
Recording/Playback  
Five pieces of advice for successful recording  
.Stabilizing.your.camcorder  
When you hold the camcorder, keep your upper body upright,  
and hold your arms close to your body.  
The SteadyShot function is effective against camera-shake,  
however, it is essential that you not move the camcorder.  
.Zooming.smoothly  
Zoom in and out slowly and smoothly. And, use zooming  
sparingly. Excessive zooming will make movies that may make  
the viewer feel tired when viewing them.  
.Evoking.a.feeling.of.spaciousness  
Use the panning technique. Stabilize yourself, move your  
camcorder horizontally as you turn your upper body slowly. Stay  
still at the end of panning for a while to make the scene look  
stable.  
.Accentuating.movies.with.narration  
Consider the sound to be recorded with your movies. Narrate  
the subject, or talk to the subject during shooting.  
Aim for a balanced volume of voices, since the recording person  
is closer to the microphone than the recorded person.  
.Using.accessories  
Make good use of camcorder accessories.  
For example, using a tripod, you can make a time-lapse  
recording or record subjects in dim light, such as scenes of  
fireworks, or night views. By always carrying spare batteries, you  
can continue recording without worrying about battery power  
shortages.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1ꢆ  
 
Recording and playing movies and photos easily  
Easy Handycam Operation)  
(
Simply press EASY. You can record or play movies and photos easily (Easy Handycam  
operation).  
During Easy Handycam operation, you can set basic options, such as changing the image size  
or deleting images, among the setting and adjustment items. Other items are set automatically.  
When Easy Handycam operation is started, nearly all menu settings are reset to the default settings  
automatically. (Some menu items retain the settings that were made before Easy Handycam operation.)  
Recording movies  
In the default setting, movies are recorded on the  
internal memory (p. 55).  
Fasten the grip belt.  
Open the lens cover.  
Open the LCD screen of your camcorder.  
Your camcorder is turned on.  
To turn on your camcorder when the LCD screen is already open, press POWER (p. 17).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀ0  
       
Press EASY.  
appears on the LCD screen.  
Press START/STOP to start recording.  
START/STOP button  
[STBY] [REC]  
To stop recording, press START/STOP again.  
Tips  
The [REC MODE] is fixed to [SP] (p. 60).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀ1  
     
Shooting photos  
Open the lens cover.  
Open the LCD screen of your camcorder.  
Your camcorder is turned on.  
To turn on your camcorder when the LCD screen is already open, press POWER (p. 17).  
Press EASY.  
appears on the LCD screen.  
Press MODE to turn on the (Photo) lamp.  
The aspect ratio of the screen becomes 4:3.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀꢀ  
     
Press PHOTO lightly to adjust the focus, then press it fully.  
Flashes Lights up  
When  
disappears, the photo is recorded on the internal memory.  
Playing movies  
Open the LCD screen of your camcorder.  
Your camcorder is turned on.  
To turn on your camcorder when the LCD screen is already open, press POWER (p. 17).  
Touch (VIEW IMAGES).  
(VIEW IMAGES)  
The VISUAL INDEX screen appears after some seconds.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀꢁ  
       
Touch the (Movie) tab () a desired movie ().  
Searches for images by  
date (p. 36)  
HOME MENU  
Previous 6 images  
Next 6 images  
Returns to the  
recording screen  
: Displays the Film Roll Index screen (p. 35).  
: Displays the Face Index screen (p. 35).  
: Displays movies.  
: Displays photos.  
appears with the movie or photo that was most recently played or recorded. If you touch the  
movie or photo with , you can continue playback from the previous time. (appears on the  
photo recorded on “Memory Stick PRO Duo” media.)  
Your camcorder starts playing the selected movie.  
Volume adjustment  
Previous  
Next  
To stop  
To fast-forward  
To pause/play  
To fast-reverse  
Tips  
When playback from the selected movie reaches the last movie, the screen returns to the VISUAL INDEX  
screen.  
You can slow down the playback speed by touching  
You can adjust the volume by touching adjust with  
The setting of [DATA CODE] is fixed to [DATE/TIME] (p. 66).  
/
during pause.  
/
during playback.  
To change the recording media, select the recording media on [MOVIE MEDIA SET] (p. 55).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀꢂ  
   
Viewing photos  
On the VISUAL INDEX screen, touch the (Photo) tab () a desired photo  
().  
Your camcorder starts playing the selected photo.  
Previous  
Slide show/pause  
Next  
To the VISUAL  
INDEX screen  
Tips  
The setting of [DATA CODE] is fixed to [DATE/TIME] (p. 66).  
To change the recording media, select the recording media on [PHOTO MEDIA SET] (p. 55).  
To cancel Easy Handycam operation  
After you finish recording, or close menu setting screen, press EASY again.  
from the LCD screen.  
disappears  
Menu settings during Easy Handycam operation  
Touch (HOME) to display the menu items available for setup changes. See “Menu lists”  
(p. 11) on the available menu items.  
Notes  
You cannot use the  
OPTION MENU.  
Cancel Easy Handycam operation if you want to add effects to images or change settings.  
Invalid buttons during Easy Handycam operation  
You cannot use some buttons/functions during Easy Handycam operation since they are  
automatically set. If you set an invalid operation, [Invalid during Easy Handycam operation.]  
may appear.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀꢃ  
   
Recording  
Recording movies  
In the default setting, movies are recorded on the  
internal memory (p. 55).  
Fasten the grip belt.  
Open the lens cover.  
Open the LCD screen of your camcorder.  
Your camcorder is turned on.  
To turn on your camcorder when the LCD screen is already open, press POWER (p. 17).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀꢄ  
     
Press START/STOP to start recording.  
START/STOP button  
[STBY] [REC]  
To stop recording, press START/STOP again.  
See page 88 on the recordable time of movies.  
When a movie file exceeds 2 GB, the next movie file is created automatically.  
You can change the recording media and recording mode (p. 55, 60).  
[ STEADYSHOT] is set to [ON] in the default setting.  
It will take several seconds until you can start recording after you turn on the camcorder. You cannot  
operate your camcorder during this time.  
If you close the LCD screen while recording movies, the camcorder stops recording.  
If the access lamp is lit or flashing after recording is finished, it means that data is still being written onto  
the recording media. Do not apply shock or vibration to your camcorder, and do not remove the battery  
or AC Adaptor.  
You can check the recordable time and the remaining capacity, etc., by touching  
(HOME)   
(MANAGE MEDIA) [MEDIA INFO] (p. 57).  
To adjust the angle of the LCD panel, first open the LCD panel 90 degrees to the camcorder , and then  
adjust the angle . If you rotate the LCD panel 180 degrees to the lens side , you can record movies/  
photos in mirror mode.  
90 degrees (max.)  
90 degrees to the camcorder  
180 degrees (max.)  
Tips  
When a face is detected during movie recording, flashes and the detected face is stored in the index.  
You can search for a desired scene by a face image when playing back ([Face Index], p. 35).  
You can capture photos from recorded movies (p. 43).  
You can switch the shooting mode by touching  
(HOME)   
(CAMERA) [MOVIE].  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀ7  
   
Data code during recording  
The recording date, time and condition are recorded automatically on the recording media.  
They are not displayed during recording. However, you can check them as [DATA CODE]  
during playback (p. 66).  
Shooting photos  
In the default setting, photos are recorded on the internal memory (p. 55).  
Open the lens cover.  
Open the LCD screen of your camcorder.  
Your camcorder is turned on.  
To turn on your camcorder when the LCD screen is already open, press POWER (p. 17).  
Press MODE to turn on the (Photo) lamp.  
The aspect ratio of the screen becomes 4:3.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀꢅ  
       
Press PHOTO lightly to adjust the focus, then press it fully.  
Flashes Lights up  
disappears, the photo is recorded.  
When  
See page 89 on the recordable number of photos.  
To change the image size, touch  
(HOME)   
(SETTINGS) [PHOTO SETTINGS]   
[
IMAGE SIZE] a desired setting   
You cannot record photos while  
is displayed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀꢆ  
Useful functions for recording movies and photos  
Zooming  
You can magnify images up to 60 times the original size with the power zoom lever.  
Wider range of view  
(Wide angle)  
Close view  
(Telephoto)  
Move the power zoom lever slightly for a slower zoom. Move it further for a faster zoom.  
Notes  
SteadyShot may not reduce image blurring as desired when the power zoom lever is set to the T  
(Telephoto) side.  
Be sure to keep your finger on the power zoom lever. If you move your finger off the power zoom lever,  
the operation sound of the power zoom lever may also be recorded.  
The minimum possible distance between camcorder and subject while maintaining sharp focus is about  
1 cm (about 13/32 in.) for wide angle and about 150 cm (about 59 1/8 in.) for telephoto.  
Tips  
You can set [DIGITAL ZOOM] (p. 61) if you want to zoom to a greater level.  
Adjusting the exposure for backlit subjects  
To adjust the exposure for backlit subjects, press (backlight) to display . To cancel the  
backlight function, press (backlight) again.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢁ0  
     
Recording in mirror mode  
Open the LCD panel 90 degrees to the camcorder , then rotate it 180 degrees to the lens  
side .  
Tips  
A mirror-image of the subject appears on the LCD screen, but the image will be normal when recorded.  
Switching the screen display  
Information (remaining battery capacity, etc.) toggles off and on each time you press DISP.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢁ1  
     
Playback.on.the.camcorder  
In the default setting, movies and photos that are recorded on the internal memory are played  
Playing movies  
Open the LCD screen of your camcorder.  
Your camcorder is turned on.  
To turn on your camcorder when the LCD screen is already open, press POWER (p. 17).  
Touch (VIEW IMAGES).  
(VIEW IMAGES)  
The VISUAL INDEX screen appears after some seconds.  
Touch the (Movie) tab () a desired movie ().  
To the list of recording  
dates (p. 36)  
Previous  
Next  
To return to  
recording mode  
: Displays the Film Roll Index screen (p. 35).  
: Displays the Face Index screen (p. 35).  
: Displays movies.  
: Displays photos.  
appears with the movie or photo that was most recently played or recorded. If you touch the  
movie or photo with , you can continue playback from the previous time. (appears on the  
photo recorded on “Memory Stick PRO Duo” media.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢁꢀ  
       
Your camcorder starts playing the selected movie.  
Previous  
Next  
Volume adjustment  
OPTION  
To stop  
To fast-forward  
To pause/play  
To fast-reverse  
Tips  
When playback from the selected movie reaches the last movie, the screen returns to the VISUAL INDEX  
screen.  
Touch  
As you repeat touching  
/
during pause to play back movies slowly.  
during playback, movies are played as fast as about 5 times   
/
about 10 times about 30 times about 60 times.  
The recording date, time, and shooting conditions are recorded automatically during recording. This  
information is not displayed during recording, but you can display it during playback by touching  
(HOME)   
(SETTINGS) [VIEW IMAGES SET] [DATA CODE] a desired setting   
.
To adjust the sound volume of movies  
While playing back movies, touch  
adjust with  
/
.
You can adjust the sound volume from the OPTION MENU.  
Viewing photos  
Touch the (Photo) tab () a desired photo () on the VISUAL INDEX  
screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢁꢁ  
         
Your camcorder displays the selected photo.  
Previous  
To start/stop slide show  
Next  
OPTION MENU  
To the VISUAL  
INDEX screen  
Tips  
When viewing photos recorded on “Memory Stick PRO Duo” media,  
the screen.  
(playback folder) appears on  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢁꢂ  
 
Useful functions for playing movies and photos  
Searching for desired scene by pinpoint (Film Roll Index)  
Movies can be divided by a set time and the first scene of each division is displayed on the  
INDEX screen. You can start playing back a movie from the selected thumbnail.  
Select the recording media which contains the movie you want to play back before the  
operation (p. 55).  
Touch  
(VIEW IMAGES).  
The VISUAL INDEX screen appears.  
Touch (Film Roll Index).  
Returns to the VISUAL INDEX screen.  
Sets the interval at which to create thumbnails of scenes in a movie.  
Touch  
Touch  
/
/
to select the desired movie.  
to search for the desired scene, then touch the scene you want  
to play back.  
Playback starts from the selected scene.  
Searching for desired scene by face (Face Index)  
The face images detected during movie recording are displayed on the INDEX screen.  
You can play back the movie from the selected face image.  
Select the recording media which contains the movie you want to play back before the  
operation (p. 55).  
Touch  
(VIEW IMAGES).  
The VISUAL INDEX screen appears.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢁꢃ  
     
Touch (Face Index).  
Returns to the VISUAL INDEX screen.  
Touch  
Touch  
/
/
to select the desired movie.  
to search for the desired face image, then touch the desired  
face image to view the scene.  
Playback starts from the beginning of the scene with the selected face image.  
Notes  
Faces may not be detected depending on recording conditions.  
Example: People wearing glasses or hats, or who do not face towards the camera.  
Searching for desired images by date (Date Index)  
You can search for desired images by date efficiently.  
Select the recording media which contains the image you want to play back before the  
operation (p. 55).  
Notes  
You cannot use the Date Index function for photos on the “Memory Stick PRO Duo” media.  
Touch  
(VIEW IMAGES).  
The VISUAL INDEX screen appears.  
To search for movies, touch the (Movie) tab. To search for photos, touch  
the (Photo) tab.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢁꢄ  
   
Touch date on the screen.  
The recording dates of images are displayed on the screen.  
Returns to the VISUAL INDEX screen.  
Touch  
/
to select the date of the desired image, then touch  
.
The images of the selected date are displayed on the VISUAL INDEX screen.  
Tips  
On the [Film Roll Index]/[Face Index] screen, you can use the Date Index function by following the steps  
3 to 4.  
Using PB zoom with photos  
You can magnify photos from about 1.1 to 5 times the original size.  
Magnification can be adjusted with the power zoom lever.  
Play back the photo you want to magnify.  
Magnify the photo with T (Telephoto).  
The screen is framed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢁ7  
   
Touch the screen at the point you want to display in the center of the  
displayed frame.  
Adjust the magnification with W (Wide angle)/T (Telephoto).  
To cancel, touch  
.
Playing back a series of photos (Slide show)  
Touch  
on the photo playback screen.  
The slide show begins from the selected photo.  
To stop the slide show  
Touch  
.
To restart the slide show  
Touch  
again.  
Notes  
You cannot operate playback zoom during slide show.  
Tips  
You can also play back the slide show by touching  
VISUAL INDEX screen.  
You can set continuous slide show playback by selecting  
(OPTION)   
tab [SLIDE SHOW] on the  
tab [SLIDE SHOW  
(OPTION)   
SET] while playing photos. The default setting is [ON] (continuous playback).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢁꢅ  
   
Playing images on a TV  
Connect your camcorder to the input jack of a TV or VCR using the A/V connecting cable  
or an A/V connecting cable with S VIDEO . Connect your camcorder to the wall  
outlet (wall socket) using the supplied AC Adaptor for this operation (p. 16). Refer also to the  
instruction manuals supplied with the devices to be connected.  
A/V connecting cable (supplied)  
Connecting to another device via the A/V jack using an A/V connecting cable.  
A/V connecting cable with S VIDEO (sold separately)  
When connecting to another device via the S VIDEO jack, by using an A/V connecting cable  
with an S VIDEO cable (sold separately), higher quality images can be produced than with an  
A/V connecting cable. Connect the white and red plugs (left/right audio) and the S VIDEO plug  
(S VIDEO channel) of the A/V connecting cable with an S VIDEO cable (sold separately). The  
yellow plug connection is not necessary. Connecting only the S VIDEO plug will not output  
audio.  
IN  
VIDEO  
AUDIO  
TVs  
(Yellow)  
(White)  
(Red)  
S VIDEO  
VCRs  
(Yellow)  
:Signal flow  
A/V Remote Connector  
Set the input selector of the TV to the input your camcorder will be  
connected to.  
For details, refer to the instruction manuals supplied with the TV.  
Connect your camcorder to a TV with the A/V connecting cable (,  
supplied) or an A/V connecting cable with S VIDEO (, sold separately).  
Connect your camcorder to the input jack of the TV.  
Play back movies and photos on your camcorder (p. 32).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢁꢆ  
     
To set the aspect ratio according to the connected TV (16:9/4:3)  
Touch (HOME)  
[4:3]  
(SETTINGS) [OUTPUT SETTINGS] [TV TYPE] [16:9] or  
.
Tips  
To check information (counter, etc.) on the screen of the monitor, touch  
(HOME)  
(SETTINGS)  
[OUTPUT SETTINGS] [DISP OUTPUT] [V-OUT/PANEL] (default setting)  
.
When connecting to your TV via a VCR  
Connect your camcorder to the LINE IN input on the VCR using the A/V connecting cable.  
Set the input selector on the VCR to LINE (VIDEO 1, VIDEO 2, etc.).  
When your TV is monaural (When your TV has only one audio input jack)  
Connect the yellow plug of the A/V connecting cable to the video input jack and connect the  
white (left channel) or red (right channel) plug to the audio input jack of your TV or VCR.  
If your TV/VCR has a 21-pin adaptor (EUROCONNECTOR)  
Use a 21-pin adaptor (sold separately) to view playback pictures.  
TV/VCR  
Notes  
When you set [TV TYPE] to [4:3], the image quality may deteriorate. Also, when the recorded images  
aspect ratio switches between 16:9 (wide) and 4:3, the image may jitter.  
On some 4:3 TVs, the photos recorded in 4:3 aspect ratio may not be displayed full screen. This is not a  
malfunction.  
When you play back an image recorded in 16:9 (wide) aspect ratio on a 4:3 TV not compatible with the  
16:9 (wide) signal, set [TV TYPE] to [4:3].  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢂ0  
   
Editing  
Deleting movies and  
photos  
You can free media space by deleting  
movies and photos from recording media.  
Select the recording medium that contains  
the movies and photos you want to delete  
before starting the operation (p. 55).  
3
4
Touch and display the mark  
on the movies or photos to be  
deleted.  
Notes  
You cannot restore images once they are  
deleted.  
Tips  
Press and hold the image down on the  
LCD screen to confirm the image. Touch  
to return to the previous screen.  
Do not remove the battery pack or the AC  
Adaptor from your camcorder while deleting  
the images. It may damage the recording media.  
Do not eject “Memory Stick PRO Duo” media  
while deleting images from the “Memory Stick  
PRO Duo” media.  
You cannot delete protected movies and photos.  
Undo the protection of the movies and photos  
to delete them, before you try to delete them  
If the deleted movie is included in the Playlist  
(p. 48), the movie added to the Playlist is  
deleted also from the Playlist.  
Save important movies and photos in advance  
Touch  
.
[YES]   
To delete all movies/photos at one time  
In step 2, touch [ DELETE]   
[
DELETE ALL] [YES] [YES]   
.
To delete all photos at one time, touch  
DELETE] [ DELETE ALL] [YES]  
[YES]   
[
.
Tips  
You can select up to 100 images at one time.  
You can delete an image on the playback screen  
To delete all the movies/photos  
recorded on the same day at one time  
You can delete photos by selecting recording  
dates only when photos are recorded on the  
internal memory.  
from  
OPTION MENU.  
To delete all images recorded in the recording  
media, and recover all the recordable space of  
the media, format the media (p. 58).  
Reduced-size images which enable you to view  
many images at the same time on an index  
screen are called “thumbnails.”  
In step 2, touch [ DELETE]   
[
DELETE by date].  
To delete all photos on the same day at one  
time, touch [ DELETE] [ DELETE  
by date].  
1
2
Touch (HOME)   
[DELETE].  
(OTHERS)  
To delete movies, touch  
[
DELETE] [ DELETE].  
To delete photos, touch [ DELETE]   
DELETE].  
[
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢂ1  
   
Touch  
/
to select the recording date  
of the desired movies/photos, then touch  
.
The movies/photos recorded on the  
selected date are displayed on the  
screen.  
Tips  
Touch the image down on the LCD screen  
to confirm the image. Touch  
to the previous screen.  
to return  
Touch  
[YES]   
.
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢂꢀ  
To continue capturing, touch  
repeat steps from step 3.  
To capture a photo from another movie,  
, then  
Capturing a photo  
from a movie  
touch  
, then repeat steps from step 2.  
You can save a selected frame from a  
recorded movie as a photo.  
Select the recording media which contains  
movies, and the recording media where you  
want to save photos before the operation  
5
Touch  
.
Notes  
The image size is fixed depending on the aspect  
ratio of the movie:  
[  
0.2M] in the aspect ratio 16:9  
1
Touch (HOME)   
[PHOTO CAPTURE].  
The [PHOTO CAPTURE] screen  
appears.  
(OTHERS)  
[VGA(0.3M)] in the aspect ratio 4:3  
The recording medium where you want to save  
photos should have enough free space.  
The recording date and time of captured photos  
is the same as the recording date and time of  
the movies.  
If the movie you are capturing from has no data  
code, the recording date and time of the photo  
will be the date and time you captured from  
the movie.  
2
3
Touch the movie to be captured.  
The selected movie starts playback.  
You cannot capture a photo from a movie  
recorded on “Memory Stick PRO Duo” media  
(DCR-SX30E/SX31E/SX50E).  
Touch  
at the point where  
you want to capture.  
The movie pauses. Play and pause  
toggles as you press  
.
Adjust the capturing point with  
more precision after you selected  
the point with  
.
Returns to the beginning of the selected  
movie.  
4
Touch  
.
The captured photo is saved on the  
recording media selected in [PHOTO  
MEDIA SET] (p. 55).  
When capturing is finished, the screen  
returns to pause.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢂꢁ  
   
Dubbing/copying  
movies and photos  
from the internal  
Touch the type of dubbing.  
[DUB by select]: To select movies and  
dub  
[DUB by date]: To dub all movies of a  
specified date  
memory to “Memory  
Stick PRO Duomedia  
[
DUB ALL]: To dub the Playlist  
When you select the Playlist as the  
source of dubbing, follow the on-screen  
instructions to dub the Playlist.  
Dubbing movies  
You can dub movies recorded on the  
internal memory of your camcorder to  
“Memory Stick PRO Duo” media.  
Insert “Memory Stick PRO Duo” media  
into your camcorder before the operation.  
Select the movie to be dubbed.  
[DUB by select]: Touch the movie to be  
dubbed, and mark it with . You can  
select multiple movies.  
Notes  
When you record a movie on the “Memory  
Stick PRO Duo” media for the first time, create  
the image database file by touching  
(MANAGE MEDIA) [REPAIR IMG.  
DB F.] [MEMORY STICK].  
(HOME)  
Connect your camcorder to the wall outlet  
(wall socket) using the supplied AC Adaptor to  
prevent your camcorder from running out of  
power during dubbing.  
Remaining capacity of the  
“Memory Stick PRO Duo” media  
Tips  
Tips  
Press and hold the image down on the  
LCD screen to confirm the image. Touch  
to return to the previous screen.  
The original movie will not be deleted after  
dubbing.  
All included images in a Playlist will be dubbed.  
The images recorded by this camcorder and  
stored onto the recording media are called  
“original.”  
[DUB by date]: Select the recording  
date of the movie to be dubbed, then  
touch  
dates.  
. You cannot select multiple  
Touch (HOME)   
[MOVIE DUB].  
(OTHERS)  
The [MOVIE DUB] screen appears.  
Touch  
.
[YES]   
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢂꢂ  
       
Tips  
Tips  
To check the dubbed movies after dubbing is  
finished, select [MEMORY STICK] on [MOVIE  
MEDIA SET] and play them back (p. 55).  
Press and hold the image down on the  
screen to confirm the image. Touch  
return to the previous screen.  
to  
[COPY by date]: Select the recording  
date of the photo to be copied, then  
Copying photos  
touch  
dates.  
. You cannot select multiple  
You can copy photos from the internal  
memory of the camcorder to “Memory  
Stick PRO Duo” media.  
Insert “Memory Stick PRO Duo” media  
into your camcorder before the operation.  
Notes  
Connect your camcorder to the wall outlet  
(wall socket) using the supplied AC Adaptor to  
prevent your camcorder from running out of  
power during copying.  
Touch  
.
[YES]   
Touch (HOME)   
[PHOTO COPY].  
(OTHERS)  
Tips  
The [PHOTO COPY] screen appears.  
To check the copied photos after copying  
is finished, select [MEMORY STICK] on  
[PHOTO MEDIA SET] and play them back  
Touch the type of copying.  
[COPY by select]: To copy selected  
photos  
[COPY by date]: To copy all photos of  
a specified date  
Select the photo to be copied.  
[COPY by select]: Touch the photo to  
be copied, and mark with . You can  
select multiple photos.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢂꢃ  
     
To undo the protection of movies and  
photos  
Touch the movie or photo marked with   
in step 3.  
disappears.  
Protecting recorded  
movies and photos  
(Protect)  
Protect movies and photos to avoid deleting  
them by mistake.  
Select the recording medium that contains  
the movies and photos you want to protect  
before starting the operation (p. 55).  
To protect all the movies and photos  
recorded on the same day at one time  
You can protect photos recorded on the internal  
memory by selecting their recording date.  
In step 2, touch [ PROTECT]   
Tips  
[
PRT. by date].  
To protect all photos on the same day at  
one time, touch [ PROTECT]   
You can protect movies and photos on the  
playback screen from  
OPTION MENU.  
[
PRT. by date].  
1
2
Touch (HOME)   
[EDIT].  
(OTHERS)  
To protect movies, touch  
[
PROTECT] [ PROTECT].  
Touch  
/
to select the recording date  
To protect photos, touch [ PROTECT]  
[ PROTECT].  
of the desired movies/photos, then touch  
.
Tips  
3
Touch the movies and photos to  
be protected.  
Touch the image down on the LCD screen  
to confirm the image. Touch  
to the previous screen.  
to return  
is displayed on the selected images.  
Touch  
[ON]   
.
To undo the protection of movies and  
photos recorded on the same day at  
one time  
In step above, select the recording date  
of the desired movies/photos, then touch  
Tips  
[OFF]   
.
Press and hold the image down on the  
LCD screen to confirm the image. Touch  
to return to the previous screen.  
You can select up to 100 images at one  
time.  
4
Touch  
.
[YES]   
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢂꢄ  
         
A slight difference may occur from the point  
where you touch and the actual dividing  
point, as your camcorder selects the dividing  
point based on about half-second increments.  
If you divide the original movie, the movie  
added to the Playlist will also be divided.  
Dividing a movie  
Select the recording medium which  
contains the movie you want to divide  
before the operation (p. 55).  
Tips  
You can divide a movie on the playback screen  
1
2
3
Touch (HOME)   
[EDIT] [ DIVIDE].  
(OTHERS)  
from  
OPTION MENU.  
Touch the movie to be divided.  
The selected movie starts playback.  
Touch  
at the point where  
you want to divide the movie into  
scenes.  
The movie pauses. Play and pause  
toggles as you press  
.
Adjusts the dividing point with  
more precision after you selected  
the dividing point with  
.
Returns to the beginning of the selected  
movie.  
4
Touch  
.
[YES]   
Notes  
You cannot restore movies once they are  
divided.  
Do not remove the battery pack or the AC  
Adaptor from your camcorder while dividing  
the movie. It may damage the recording media.  
Also, do not eject the “Memory Stick PRO Duo”  
media while dividing movies on the “Memory  
Stick PRO Duo” media.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢂ7  
   
The recording dates of movies are  
displayed on the screen.  
Using the Playlist of  
movies  
The Playlist is a list showing thumbnails of  
the movies that you have selected.  
The original movies are not changed even if  
you edit or delete the movies added to the  
Playlist.  
Select the recording media you want to  
create, play, or edit a Playlist before the  
operation (p. 55).  
Touch  
of the desired movie, then touch  
The movies recorded on the selected  
date are displayed on the screen.  
/
to select the recording date  
.
Tips  
Creating the Playlist  
Touch the image on the LCD screen to  
confirm the image. Touch  
the previous screen.  
to return to  
Touch (HOME)   
[PLAYLIST EDIT].  
(OTHERS)  
Touch  
[YES]   
.
Notes  
Do not remove the battery pack or the AC  
Adaptor from your camcorder while adding  
movies to the Playlist. It may damage the  
recording media. Also, do not eject the  
“Memory Stick PRO Duo” media while editing  
movies on the “Memory Stick PRO Duo” media.  
You cannot add photos to the Playlist.  
Touch [ ADD].  
Touch the movie to be added to  
the Playlist.  
Tips  
You can add a maximum of 99 movies to the  
Playlist.  
You can add a movie on the playback screen or  
The selected movie is marked with  
.
the INDEX screen by touching  
(OPTION).  
You can copy the Playlist to a disc as it is, by  
using the supplied software.  
Tips  
Press and hold the image down on the  
LCD screen to confirm the image. Touch  
to return to the previous screen.  
Playing the Playlist  
Select the recording media you want to play  
a Playlist before the operation (p. 55).  
Touch  
.
[YES]   
Touch (HOME)   
IMAGES) [PLAYLIST].  
(VIEW  
To add all the movies recorded on the  
same day at one time  
Movies added to the Playlist appear.  
In step 2, touch [ ADD by date].  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢂꢅ  
         
The selected movie is marked with  
.
Touch the movie you want to  
play back.  
Tips  
Touch the image on the LCD screen to  
confirm the image. Touch  
the previous screen.  
to return to  
The Playlist is played back from the  
selected movie to the end, then the  
screen returns to the Playlist screen.  
Touch  
Select the destination with  
.
/
.
To erase unnecessary movies from the  
Playlist  
Touch (HOME) (OTHERS)   
[PLAYLIST EDIT].  
Touch [ ERASE].  
To erase all the movies from the Playlist,  
touch [ ERASE ALL] [YES]   
Destination bar  
[YES]   
Touch  
.
[YES]   
.
Tips  
When you select multiple movies, the movies  
are moved following the order appearing in the  
Playlist.  
Select the movie to be erased from the  
list.  
The selected movie is marked with  
.
Tips  
Press and hold the image down on the  
LCD screen to confirm the image. Touch  
to return to the previous screen.  
Touch  
[YES]   
.
Tips  
Even if you erase a movie from a Playlist, the  
original movie is not erased.  
To change the order within the Playlist  
Touch (HOME) (OTHERS)   
[PLAYLIST EDIT].  
Touch [ MOVE].  
Select the movie to be moved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢂꢆ  
 
Creating a disc with a  
DVD writer, recorder  
Insert an unused disc into the  
DVD writer, and close the disc  
tray.  
Creating a disc with the dedicated  
DVD writer, DVDirect Express  
The [DISC BURN] screen appears on  
the camcorder screen.  
Operating on the camcorder screen, you  
can save movies on a disc when using the  
dedicated DVD writer, DVDirect Express  
(sold separately). You can also play back  
images on a created disc.  
Refer also to the instruction manual  
supplied with the DVD writer.  
DVDirect Express is referred to as “DVD  
writer” in this section.  
Only unused discs of the following types can  
be used:  
12cm DVD-R  
12cm DVD+R  
The device does not support two-layered discs.  
Sony DVD writer may not be available in some  
countries/regions.  
Press  
writer.  
(DISC BURN) on the DVD  
Movies recorded on the internal  
memory that have not been saved on  
any discs will be recorded onto the  
disc.  
After the disc has been created, the disc  
tray on the DVD writer opens and you  
can remove the disc.  
You can also operate with  
BURN) on your camcorder.  
(DISC  
Turn on your camcorder, and  
connect the DVD writer to the  
(USB) jack of your camcorder  
with the USB cable of the DVD  
writer.  
Repeat steps 2 and 3 when the  
total memory size of movies to  
be burnt exceeds that of the disc.  
After the operation is completed,  
touch  
[END] on the  
camcorder screen.  
Touch [EJECT DISC] and remove any  
inserted disc.  
The [EXTERNAL DRIVE] screen  
appears on the camcorder screen.  
Close the disc tray on the DVD  
writer, and disconnect the USB  
cable.  
Notes  
Use the supplied AC Adaptor as the power  
source (p. 16). When using battery power, the  
DVD writer does not work.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢃ0  
   
To create a disc with the selected  
images  
To dub a desired image onto the disc or to  
create many of the same discs, perform this  
operation.  
After the operation is completed, touch  
[EXIT] [END] on the camcorder  
screen.  
Close the disc tray on the DVD writer,  
and disconnect the USB cable from your  
camcorder.  
Touch [DISC BURN OPTION] in step 3  
above.  
To play back a disc on the DVD writer  
Select the recording media containing  
the movie(s) you want to save.  
Movie thumbnails appear on the  
camcorder screen.  
Touch the movie you want to burn on  
the disc.  
Turn on your camcorder, and connect  
the DVD writer to the (USB) jack of  
your camcorder with the USB cable of  
the DVD writer.  
The [EXTERNAL DRIVE] screen  
appears.  
appears.  
Tips  
You can play back movies on the TV  
screen by connecting the camcorder to a  
TV (p. 39).  
Insert a created disc into the DVD  
writer.  
Remaining Disc capacity  
The movies on the disc appear as  
VISUAL INDEX on the camcorder  
screen.  
Press the play button on the DVD writer.  
The movie plays back on the camcorder  
Tips  
Press and hold the image down on the  
LCD screen to confirm the image. Touch  
to return to the previous screen.  
By touching date, you can search for  
images by date.  
screen.  
Touch  
screen.  
[YES] on the camcorder  
You can also operate by the camcorder  
screen (p. 32).  
Touch [END] [EJECT DISC] on the  
camcorder screen and remove the disc  
after the operation is completed.  
The disc tray on the DVD writer opens  
after creating the disc.  
Remove the disc from the DVD writer,  
Touch  
and disconnect the USB  
and close the disc tray.  
To create another disc of the same  
contents, insert a new disc and touch  
[CREATE SAME DISC].  
cable.  
Notes  
Be sure to turn on the camcorder. The DVD  
writer is powered from the camcorder.  
You can use [DISC BURN OPTION] to create  
many of the same disc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢃ1  
Do not do any of the following when creating  
a disc.  
Turn off the camcorder  
Disconnect the USB cable or the AC adaptor  
Subject the camcorder to mechanical shock  
or vibration  
Eject the “Memory Stick PRO Duo” media  
from the camcorder  
Turn on your camcorder, and  
connect a DVD writer, etc., to the  
(USB) jack of your camcorder  
with the USB cable (supplied).  
You cannot add movies to a created disc.  
Play the created disc to make sure dubbing was  
performed correctly before deleting the movies  
on your camcorder.  
If [Failed.] or [DISC BURN failed.] appears on  
the screen, insert another disc into the DVD  
writer and touch  
(DISC BURN) again.  
The [USB SELECT] screen appears on  
the camcorder screen.  
Tips  
If the [USB SELECT] screen does  
If the total memory size of movies to be burnt  
by the DISC BURN operation exceeds that of  
the disc, disc creation stops when the limit is  
reached. The last movie on the disc may be  
cut off.  
Disc creation time to dub movies to the limit of  
the disc is about 20 to 60 minutes. It may take  
more time depending on the recording mode or  
the number of scenes.  
You can play back created discs on a general  
DVD player. If playback is not possible for any  
reason, connect the camcorder to the DVD  
writer, and then play back.  
The disc mark appears on the camcorder  
screen.  
not appear, touch  
(HOME)   
(OTHERS) [USB CONNECT].  
Touch [ USB CONNECT] when  
movies are recorded on the  
internal memory, or [ USB  
CONNECT] when movies are  
recorded on “Memory Stick PRO  
Duomedia on the camcorder  
screen.  
Record movies on the connected  
device.  
For details, refer to the instruction  
manuals supplied with the device to be  
connected.  
Creating a disc with a DVD writer,  
etc., other than DVDirect Express  
You can save movies on a disc by  
connecting your camcorder to disc creation  
devices, such as a Sony DVD writer other  
than DVDirect Express, with the USB  
cable. Refer also to the instruction manuals  
supplied with the devices to be connected.  
The method used to create a disc by  
After the operation is completed,  
touch [END] [YES] on the  
camcorder screen.  
connecting your camcorder to a Sony DVD  
Disconnect the USB cable.  
writer with the USB cable is described here.  
Connect your camcorder to the wall outlet (wall  
socket) using the supplied AC Adaptor for this  
operation (p. 16).  
Sony DVD writer may not be available in some  
countries/regions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢃꢀ  
   
A/V Remote  
Connector  
Creating a disc with a recorder, etc.  
You can dub images played back on your  
camcorder on a disc or video cassette,  
by connecting your camcorder to a disc  
recorder, a Sony DVD writer other than  
DVDirect Express, etc., with the A/V  
connecting cable. Connect the device  
in either way of or . Refer also to  
the instruction manuals supplied with  
the devices to be connected. Select the  
recording medium that contains movies  
you want to dub before starting the  
Input  
S VIDEO  
VIDEO  
operation (p. 55).  
Sony DVD writer may not be available in some  
countries/regions.  
(Yellow)  
(White)  
Notes  
Connect your camcorder to the wall outlet (wall  
socket) using the supplied AC Adaptor for this  
operation (p. 16).  
AUDIO  
(Red)  
(Yellow)  
A/V connecting cable (supplied)  
Connect the A/V connecting cable to the  
input jack of another device.  
Signal flow  
A/V connecting cable with S VIDEO  
(sold separately)  
When connecting to another device  
via the S VIDEO jack, by using an A/V  
connecting cable with an S VIDEO cable  
(sold separately), higher quality images can  
be produced than with an A/V connecting  
cable. Connect the white and red plug  
(left/right audio) and the S VIDEO plug  
(S VIDEO channel) of the A/V connecting  
cable with an S VIDEO cable. If you  
connect the S VIDEO plug only, you will  
hear no sound. The yellow plug (video)  
connection is not necessary.  
Insert the recording media in the  
recording device.  
If your recording device has an input  
selector, set it to the input mode.  
Connect your camcorder to the  
recording device (a disc recorder,  
etc.) with the A/V connecting  
cable (supplied) or an A/V  
connecting cable with S VIDEO  
(sold separately).  
Connect your camcorder to the input jacks  
of the recording device.  
Start playback on your  
camcorder, and record it on the  
recording device.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢃꢁ  
     
Refer to the instruction manuals supplied  
with your recording device for details.  
Checking the battery  
information  
You can check the estimated remaining  
capacity of the battery.  
When dubbing is finished, stop  
the recording device, and then  
your camcorder.  
Touch (HOME)   
(OTHERS)   
[BATTERY INFO].  
Notes  
The remaining battery capacity is shown.  
Since dubbing is performed via analog data  
transfer, the image quality may deteriorate.  
To hide the screen indicators (such as a counter,  
etc.) on the screen of the monitor device  
connected, touch  
(HOME)   
(SETTINGS) [OUTPUT SETTINGS]  
[DISP OUTPUT] [LCD PANEL] (the  
default setting)   
To record the date/time or camera settings data,  
touch (HOME) (SETTINGS)   
[VIEW IMAGES SET] [DATA CODE] a  
.
To close the battery information screen  
desired setting   
Touch  
.
. In addition, touch  
(HOME)   
(SETTINGS) [OUTPUT SETTINGS]  
[DISP OUTPUT] [V-OUT/PANEL]   
.
When the screen size of display devices  
(TV, etc.) is 4:3, touch (HOME)   
(SETTINGS) [OUTPUT SETTINGS]  
[TV TYPE] [4:3]   
.
When you connect a monaural device, connect  
the yellow plug of the A/V connecting cable  
to the video input jack, and the white (left  
channel) or the red (right channel) plug to the  
audio input jack on the device.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢃꢂ  
   
Utilizing recording media  
Selecting the recording media for  
photos  
Changing the  
recording media  
Touch (HOME)   
(MANAGE MEDIA) [PHOTO  
MEDIA SET].  
You can select the internal memory or  
“Memory Stick PRO Duo” media as the  
recording, playback, or editing medium on  
your camcorder. Select the medium to be  
used for movies and photos separately. In  
the default setting, both movies and photos  
are recorded on the internal memory.  
The [PHOTO MEDIA SET] screen  
appears.  
Touch the desired recording  
medium.  
Internal memory  
Photos  
Touch [YES]   
.
Movies  
“Memory Stick” media  
The recording medium is changed.  
You can do recording, playback, and editing  
operations on the selected medium.  
See page 88 for the recordable time of movies.  
See page 89 for the number of recordable  
photos.  
To check the recording media settings  
Light up the (Movie) lamp to check the  
recording medium used for movies, or the  
(Photo) lamp for photos. The media icon  
is displayed at the top right corner of the  
screen.  
Selecting the recording media for  
movies  
Touch (HOME)   
(MANAGE MEDIA) [MOVIE  
MEDIA SET].  
: Internal memory  
: “Memory Stick PRO Duo” media  
The [MOVIE MEDIA SET] screen  
appears.  
Inserting “Memory Stick PRO Duo”  
media  
Touch the desired medium.  
Set the recording medium to [MEMORY  
STICK] to record movies and/or photos on  
“Memory Stick PRO Duo” media (p. 55).  
Touch [YES]   
.
The recording medium is changed.  
Types of “Memory Stickmedia you can  
use with your camcorder  
For recording movies, it is recommended that  
you use “Memory Stick PRO Duo” media of 512  
MB or larger marked with:  
(“Memory Stick  
PRO Duo” media)*  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢃꢃ  
         
(“Memory Stick  
Close the “Memory Stick Duo” media  
cover after inserting the “Memory Stick  
PRO Duo” media.  
PRO-HG Duo” media)  
* Marked with Mark2 or not, either can be  
used.  
See page 89 for the recordable time of “Memory  
Stick PRO Duo” media.  
“Memory.Stick.PRO.Duo”.media/“Memory.Stick.PRO-HG.  
Duo”.media..  
(This.size.can.be.used.with.your.camcorder.)  
Access lamp  
The [Create a new Image Database  
File.] screen appears if you insert new  
“Memory Stick PRO Duo” media when  
the (Movie) lamp is lit.  
“Memory.Stick”.media.  
(You.cannot.use.it.in.your.camcorder.)  
Touch [YES].  
To record only photos on “Memory Stick  
PRO Duo” media, touch [NO].  
You cannot use any type of memory card other  
than those mentioned above.  
“Memory Stick PRO Duo” media can be  
used only with “Memory Stick PRO” media  
compatible equipment.  
Do not attach a label or the like on “Memory  
Stick PRO Duo” media or “Memory Stick Duo”  
media adaptor.  
Insert the “Memory Stick PRO Duo” media into  
the “Memory Stick Duo” media adaptor when  
using “Memory Stick PRO Duo” media with  
“Memory Stick” media compatible equipment.  
Notes  
If [Failed to create a new Image Database File.  
It may be possible that there is not enough  
free space.] is displayed in step 2, format the  
“Memory Stick PRO Duo” media (p. 58).  
To eject the “Memory Stick PRO Duo”  
media  
Open the “Memory Stick Duo” media cover  
and lightly push the “Memory Stick PRO  
Duo” media in once.  
Do not open the “Memory Stick Duo” media  
cover during recording.  
When inserting or ejecting the “Memory  
Stick PRO Duo” media, be careful so that the  
“Memory Stick PRO Duo” media does not pop  
out and drop.  
Open the “Memory Stick Duo”  
media cover, and insert the  
“Memory Stick PRO Duomedia  
into the “Memory Stick Duo”  
media slot until it clicks.  
Confirm the direction of the “Memory  
Stick PRO Duo” media. If you forcibly  
insert the “Memory Stick PRO Duo” media  
in the wrong direction, the “Memory Stick  
PRO Duo” media, “Memory Stick Duo”  
media slot, or image data may be damaged.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢃꢄ  
     
Checking the media  
information  
You can check the remaining recordable  
time for each recording mode of the  
recording media selected on [MOVIE  
MEDIA SET] (p. 55), and the approximate  
free and used media space of the recording  
media.  
Notes  
During Easy Handycam operation, you cannot  
check the media information. Cancel Easy  
Handycam operation.  
Touch (HOME)   
(MANAGE  
MEDIA) [MEDIA INFO].  
The remaining recordable time for each  
recording mode is displayed.  
Tips  
You can check the recordable free space, etc., by  
touching  
at the lower right on the screen.  
To turn off the display  
Touch  
.
Notes  
The calculation for recording media space is 1  
MB = 1,048,576 bytes. The fractions less than  
MB are discarded when the recording media  
space is displayed. The displayed size of the  
whole internal memory space will be slightly  
smaller than the size shown below despite  
displaying both free and used internal memory  
space.  
DCR-SX30E/SX40E: 4,000 MB  
DCR-SX31E/SX41E: 8,000 MB  
DCR-SX50E/SX60E: 16,000 MB  
Since there is a management file area, the used  
space is not displayed as 0 MB even if you  
perform [MEDIA FORMAT] (p. 58).  
Tips  
Only the information of the medium selected  
on [MOVIE MEDIA SET] (p. 55) is displayed.  
Change the medium setting if necessary.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢃ7  
   
Deleting all movies  
and photos (Formatting)  
Formatting deletes all the movies and  
photos to recover recordable free space.  
Notes  
Connect your camcorder to the wall outlet (wall  
socket) using AC Adaptor supplied for this  
operation (p. 16).  
To avoid the loss of important images, you  
should save them (p. 50, see Operating Guide  
too) before formatting the recording media.  
Protected movies and photos will also be  
deleted.  
1
2
3
Touch (HOME)   
(MANAGE MEDIA) [MEDIA  
FORMAT].  
Touch the recording media to  
be formatted ([INT. MEMORY] or  
[MEMORY STICK]).  
Touch [YES] [YES]   
.
Notes  
While [Executing…] is displayed, do not close  
the LCD screen, operate the buttons on the  
camcorder, disconnect the AC Adaptor, or eject  
the “Memory Stick PRO Duo” media from your  
camcorder (The access lamp is lit or flashing  
while formatting the medium.).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢃꢅ  
   
Preventing data on the  
internal memory from  
being recovered  
4
5
Touch [EMPTY].  
The [ EMPTY] screen appears.  
[
EMPTY] allows you to write  
unintelligible data onto the internal  
memory of the camcorder. In this way,  
it may become more difficult to recover  
any original data. When you dispose of or  
transfer the camcorder, it is recommended  
that you perform [ EMPTY].  
Touch [YES] [YES]   
.
Notes  
Notes  
If you perform [ EMPTY], all the images are  
deleted. To avoid the loss of important images,  
they should be saved (p. 50, see Operating  
Guide too) before performing [ EMPTY].  
You cannot perform [ EMPTY] unless you  
connect the AC Adaptor to the wall outlet (wall  
socket).  
Disconnect all cables except the AC Adaptor.  
Do not disconnect the AC Adaptor during the  
operation.  
The actual performing time for [ EMPTY] is  
as follows:  
DCR-SX30E/SX40E: about 1 minute  
DCR-SX31E/SX41E: about 1 minute  
DCR-SX50E/SX60E: about 2 minutes  
If you stop performing [ EMPTY] while  
[Executing…] appears, be sure to complete the  
operation by performing [MEDIA FORMAT]  
or [ EMPTY] when you use the camcorder  
next time.  
While performing [ EMPTY], do not apply  
any vibrations or shocks to your camcorder.  
1
Connect the AC Adaptor to the  
DC IN jack on the camcorder and  
the wall outlet (wall socket).  
2
3
Open the LCD screen to turn on  
your camcorder.  
Touch (HOME)   
(MANAGE MEDIA) [MEDIA  
FORMAT] [INT. MEMORY].  
The [ FORMAT] screen appears.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢃꢆ  
   
Customizing your camcorder  
MOVIE SETTINGS (Items for recording movies)  
The default settings are marked with .  
REC MODE (Recording mode)  
Steps  
(HOME)  
(SETTINGS) [MOVIE SETTINGS] [REC MODE] a desired setting  
You can select a recording mode to record movies from 3 levels.  
Records in high quality mode (9M (HQ)).  
HQ (  
SP (  
LP (  
)
Records in standard quality mode (6M (SP)).  
Increases the recording time (Long Play) (3M (LP)).  
)
)
Notes  
If you record in the LP mode, the quality of movies may be degraded, or scenes with quick movements  
may appear with block noise when you play back the image.  
Tips  
See page 88 for the expected recording time of each recording mode.  
You can select the [REC MODE] for each recording media separately.  
Figures such as 9M in the table show the average bit rate. M stands for Mbps.  
WIDE SELECT  
You can select the horizontal to vertical ratio according to the TV connected. Refer also to the  
instruction manuals supplied with your TV.  
Steps  
(HOME)  
(SETTINGS) [MOVIE SETTINGS] [WIDE SELECT] a desired  
setting  
16:9 WIDE  
Records movies to the full screen on a 16:9 (wide) TV screen.  
Records movies to the full screen on a 4:3 TV screen.  
4:3 (  
)
Notes  
Set [TV TYPE] correctly according to the TV connected for playback (p. 70).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢄ0  
     
DIGITAL ZOOM  
You can select the maximum zoom level up to 60 × in case you want to zoom to a level greater  
than following optical zoom during recording. Note that the image quality decreases when  
you use the digital zoom.  
Steps  
(HOME)  
(SETTINGS) [MOVIE SETTINGS] [DIGITAL ZOOM] a desired  
setting  
The right side of the bar shows the digital zooming factor. The  
zooming zone appears when you select the zooming level.  
OFF  
Up to 60 × zoom is performed optically.  
Up to 60 × zoom is performed optically, and after that, up to 120 × zoom is  
performed digitally.  
120 ×  
Up to 60 × zoom is performed optically, and after that, up to 2000 × zoom is  
performed digitally.  
2000 ×  
STEADYSHOT  
You can compensate for camera shake.  
Set [ STEADYSHOT] to [OFF] ( ) when using a tripod (sold separately), then the image  
becomes natural.  
Steps  
(HOME)  
(SETTINGS) [MOVIE SETTINGS]  
[
STEADYSHOT] a desired  
setting  
ON  
The SteadyShot function is used.  
The SteadyShot function is not used.  
OFF (  
)
AUTO SLW SHUTTR (Auto Slow Shutter)  
When recording in dark places, the shutter speed is automatically reduced to 1/25 second.  
Steps  
(HOME)  
desired setting  
(SETTINGS) [MOVIE SETTINGS] [AUTO SLW SHUTTR]  
a
ON  
The Auto Slow Shutter function is used.  
The Auto Slow Shutter function is not used.  
OFF  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢄ1  
       
GUIDEFRAME  
You can display the frame and check that the subject is horizontal or vertical.  
The frame is not recorded. Press DISP to make the frame disappear.  
Steps  
(HOME)  
(SETTINGS) [MOVIE SETTINGS] [GUIDEFRAME] a desired  
setting  
OFF  
ON  
Does not display the guide frame.  
Displays the guide frame.  
Tips  
Positioning the subject at the cross point of the guide frame makes a balanced composition.  
REMAINING SET  
Steps  
(HOME)  
desired setting  
(SETTINGS) [MOVIE SETTINGS]  
[
REMAINING SET]  
a
ON  
Always displays the remaining recording media indicator.  
Displays the remaining recording time of movies for about 8 seconds in  
situations such as those described below.  
When your camcorder recognizes the remaining recording media capacity  
AUTO  
while the  
(Movie) lamp lights up  
When you press DISP to switch the indicator from off to on while the  
(Movie) lamp lights up  
When you select the movie recording mode on the HOME MENU  
Notes  
When the remaining recordable time for movies is less than 5 minutes, the indicator stays on the screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢄꢀ  
     
FACE SET  
Steps  
(HOME)  
(SETTINGS) [MOVIE SETTINGS]  
[
FACE SET] a desired  
setting  
The camcorder detects faces automatically and displays the Face Index  
screen (p. 35).  
Face icons and their meanings  
ON  
: This icon appears when the setting is [ON].  
: This icon flashes when your camcorder detects a face. The icon stops  
flashing when the face is recorded in Face Index.  
: This icon appears when faces cannot be recorded in Face Index.  
OFF  
Does not display the Face Index screen.  
Notes  
The number of faces detected in a movie is limited.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢄꢁ  
   
PHOTO SETTINGS (Items for recording photos)  
The default settings are marked with .  
IMAGE SIZE  
You can select a photo size to be shot.  
Steps  
(HOME)  
(SETTINGS) [PHOTO SETTINGS]  
[
IMAGE SIZE] a desired  
setting  
Records photos clearly (640 × 480).  
VGA(0.3M) (  
0.2M (  
)
Allows the maximum number of photos to be recorded (640 × 360).  
The image size is set to [ 0.2M] automatically in the 16:9 (wide) aspect  
ratio.  
)
Notes  
See page 89 for the number of recordable photos.  
FILE NO. (File number)  
You can select the way to assign file number of photos.  
Steps  
(HOME)  
(SETTINGS) [PHOTO SETTINGS] [FILE NO.] a desired setting  
Assigns file numbers of photos in sequence.  
The file number becomes larger each time you record a photo.  
Even if the “Memory Stick PRO Duo” media is replaced with another one,  
the file number is assigned in sequence.  
Assigns file numbers in sequence, following the largest file number existing  
on the current recording medium.  
When the “Memory Stick PRO Duo” media is replaced with another one,  
the file number is assigned for each “Memory Stick PRO Duo” media.  
SERIES  
RESET  
AUTO SLW SHUTTR (Auto Slow Shutter)  
When recording in dark places, the shutter speed is automatically reduced to 1/25 second.  
Steps  
(HOME)  
desired setting  
(SETTINGS) [PHOTO SETTINGS] [AUTO SLW SHUTTR]  
a
ON  
The Auto Slow Shutter function is used.  
The Auto Slow Shutter function is not used.  
OFF  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢄꢂ  
       
GUIDEFRAME  
You can display the frame and check that the subject is horizontal or vertical.  
The frame is not recorded. Press DISP to make the frame disappear.  
Steps  
(HOME)  
(SETTINGS) [PHOTO SETTINGS] [GUIDEFRAME] a desired  
setting  
OFF  
ON  
Does not display the guide frame.  
Displays the guide frame.  
Tips  
Positioning the subject at the cross point of the guide frame makes a balanced composition.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢄꢃ  
   
VIEW IMAGES SET (Items to customize the display)  
The default settings are marked with .  
DATA CODE  
During playback, your camcorder displays the information (data code) recorded automatically  
at the time of recording.  
Steps  
(HOME)  
(SETTINGS) [VIEW IMAGES SET] [DATA CODE] a desired  
setting  
OFF  
Data code is not displayed.  
Displays the date and time.  
Displays camera setting data.  
DATE/TIME  
CAMERA DATA  
DATE/TIME  
Date  
Time  
CAMERA DATA  
Movie  
Photo  
SteadyShot off  
Brightness  
White balance  
Gain  
Shutter speed  
Aperture value  
Exposure  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢄꢄ  
   
Tips  
The data code is displayed on the TV screen if you connect your camcorder to a TV.  
Depending on the recording media condition, bars [--:--:--] appear.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢄ7  
SOUND/DISP SET (Items to adjust the sound and the screen)  
The default settings are marked with .  
VOLUME  
You can adjust the volume of playback sound.  
Steps  
(HOME)  
(louder)  
(SETTINGS) [SOUND/DISP SET] [VOLUME]  
(quieter)/  
BEEP  
Steps  
(HOME)  
(SETTINGS) [SOUND/DISP SET] [BEEP] a desired setting  
ON  
A melody sounds when you start/stop recording, or operate the touch panel.  
Cancels the melody.  
OFF  
LCD BRIGHT  
You can adjust the brightness of the LCD screen.  
Steps  
(HOME)  
(brighter)  
(SETTINGS) [SOUND/DISP SET] [LCD BRIGHT]  
(darker)/  
Tips  
This adjustment does not affect the recorded images in any way.  
LCD BL LEVEL (LCD back light level)  
You can adjust the brightness of the LCD screen’s backlight.  
Steps  
(HOME)  
(SETTINGS) [SOUND/DISP SET] [LCD BL LEVEL] a desired  
setting  
NORMAL  
BRIGHT  
Standard brightness.  
Brightens the LCD screen.  
Notes  
When you connect your camcorder to the wall outlet (wall socket) using the supplied AC Adaptor,  
[BRIGHT] is automatically selected for the setting.  
When you select [BRIGHT], battery life is slightly reduced during recording.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢄꢅ  
       
If you open the LCD panel 180 degrees to face the screen outside and close the LCD panel to the  
camcorder body, the setting becomes [NORMAL] automatically.  
Tips  
This adjustment does not affect the recorded images in any way.  
LCD COLOR  
You can adjust the color of the LCD screen.  
Steps  
(HOME)  
(SETTINGS) [SOUND/DISP SET] [LCD COLOR]  
(lower  
intensity)/  
(higher intensity)  
Tips  
This adjustment does not affect the recorded images in any way.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢄꢆ  
   
OUTPUT SETTINGS (Items for when connected to a TV)  
The default settings are marked with .  
TV TYPE  
See page 40.  
DISP OUTPUT (Display output)  
You can set where the screen displays are to be output.  
Steps  
(HOME)  
(SETTINGS) [OUTPUT SETTINGS] [DISP OUTPUT] a desired  
setting  
LCD PANEL  
Shows displays such as the time code on the LCD screen.  
Shows displays such as the time code on the LCD screen, and on the TV  
screen.  
V-OUT/PANEL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
70  
     
CLOCK/ LANG (Items to set clock and language)  
The default settings are marked with .  
CLOCK SET  
See page 17.  
AREA SET  
You can adjust a time difference without stopping the clock. Set your local area when using  
your camcorder in other time zones. Refer to the world time difference on page 91.  
Steps  
(HOME)  
using  
(SETTINGS) [CLOCK/ LANG] [AREA SET] set your local area  
/
SUMMERTIME  
You can change this setting without stopping the clock. Set to [ON] to move the time forward  
1 hour.  
Steps  
(HOME)  
(SETTINGS) [CLOCK/ LANG] [SUMMERTIME] a desired  
setting  
OFF  
ON  
Does not set the summertime.  
Sets the summertime.  
LANGUAGE SET  
You can select the language to be used on the LCD screen.  
Steps  
(HOME)  
(SETTINGS) [CLOCK/ LANG]  
[
LANGUAGE SET] a desired  
setting  
Tips  
Your camcorder offers [ENG[SIMP]] (simplified English) for when you cannot find your native tongue  
among the options.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
71  
       
GENERAL SET (Other setup items)  
The default settings are marked with .  
DEMO MODE  
When your camcorder is connected to a wall outlet (wall socket), a demonstration movie  
appear about 10 minutes after you turn on the (Movie) lamp by pressing MODE.  
Steps  
(HOME)  
(SETTINGS) [GENERAL SET] [DEMO MODE] a desired setting  
ON  
The demonstration appears.  
OFF  
The demonstration does not appear.  
Tips  
When you set this item to [ON] and touch  
The demonstration will be suspended:  
When you press START/STOP  
, the demonstration starts playing.  
When you touch the screen during the demonstration (The demonstration starts again after about 10  
minutes.)  
When you turn on the  
(Photo) lamp  
When you touch  
(HOME)  
CALIBRATION  
See page 96.  
A.SHUT OFF (Auto shut off)  
You can set your camcorder to turn off automatically when you do not operate your  
camcorder for more than about 5 minutes.  
Steps  
(HOME)  
(SETTINGS) [GENERAL SET] [A.SHUT OFF] a desired setting  
5min  
The camcorder turns off automatically.  
NEVER  
The camcorder does not turn off automatically.  
Notes  
When you connect your camcorder to a wall outlet (wall socket), [A.SHUT OFF] is automatically set to  
[NEVER].  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7ꢀ  
       
POWER ON BY LCD  
You can set your camcorder to turn on and off when you open and close the LCD screen.  
Steps  
(HOME)  
(SETTINGS) [GENERAL SET] [POWER ON BY LCD] a desired  
setting  
ON  
The camcorder turns on and off when the LCD screen opens and closes.  
The camcorder does not turn on and off when the LCD screen opens and  
closes.  
OFF  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7ꢁ  
   
Functions set in the OPTION MENU  
Items you can set only on the  
OPTION MENU will be described below.  
The default settings are marked with .  
SPOT MTR/FCS  
You can adjust the brightness and focus for the selected subject simultaneously. This function  
enables you to use [SPOT METER] (p. 74) and [SPOT FOCUS] (p. 75) at the same time.  
Steps  
In recording mode, (OPTION)  
[SPOT MTR/FCS] touch the subject you  
want to adjust the brightness and focus on [END]  
To adjust the brightness and focus automatically, touch [AUTO].  
Notes  
[EXPOSURE] and [FOCUS] are automatically set to [MANUAL].  
SPOT METER (Flexible spot meter)  
You can adjust and fix the exposure to the subject, so that it is recorded in suitable brightness  
even when there is strong contrast between the subject and the background, such as subjects  
in the spotlight on stage.  
Steps  
In recording mode, (OPTION)  
[SPOT METER] touch the point where  
you want to fix and adjust the exposure on the screen [END]  
To return the setting to automatic exposure, touch [AUTO].  
Notes  
[EXPOSURE] is automatically set to [MANUAL].  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7ꢂ  
     
SPOT FOCUS  
You can select and adjust the focal point to aim it at a subject not located at the center of the  
screen.  
Steps  
In recording mode, (OPTION)  
focused within the frame on the screen [END]  
[SPOT FOCUS] touch the point to be  
To adjust the focus automatically, touch [AUTO].  
Notes  
[FOCUS] is automatically set to [MANUAL].  
TELE MACRO  
This is useful to shoot small subjects, such as flowers or insects. You can blur out backgrounds  
and the subject stands out clearer.  
Steps  
In recording mode, (OPTION)  
[TELE MACRO] a desired setting  
Cancels TELE MACRO. (TELE MACRO is also canceled when you move the  
zoom lever to the W side.)  
OFF  
The zoom (p. 30) moves to the top of  
the T (telephoto) side automatically  
and allows recording subjects at a  
close distance down to about 50 cm  
(19 3/4 in.).  
ON (  
)
Notes  
When recording a distant subject, focusing may be difficult and can take some time.  
Adjust the focus manually ([FOCUS], p. 76) when it is hard to focus automatically.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7ꢃ  
     
EXPOSURE  
You can fix the brightness of a picture manually. Adjust the brightness when the subject is too  
bright or too dark.  
Steps  
In recording mode, (OPTION)  
[EXPOSURE] [MANUAL]  
(darker)/  
(brighter)  
To adjust the exposure automatically, touch [AUTO].  
FOCUS  
You can adjust the focus manually. You can select this function also when you want to focus  
on a certain subject intentionally.  
Steps  
In recording mode, (OPTION)  
[FOCUS] [MANUAL]  
(focusing on  
close subjects)/ (focusing on distant subjects)  
To adjust the focus automatically, touch [AUTO].  
Notes  
When you set [FOCUS] to [MANUAL], appears.  
The minimum possible distance between camcorder and subject while maintaining sharp focus is about 1  
cm (about 13/32 in.) for wide angle and about 150 cm (about 59 1/8 in.) for telephoto.  
Tips  
appears when the focus cannot be adjusted any closer, and appears when the focus cannot be  
adjusted farther away.  
It is easier to focus on the subject by moving the power zoom lever towards T (telephoto) to adjust the  
focus, then towards W (wide angle) to adjust the zoom for recording. When you want to record a subject  
at close range, move the power zoom lever to W (wide angle), then adjust the focus.  
The focal distance information (distance at which the subject is focused on; used as a guide if it is dark  
and focus adjustment is difficult) appears for a few seconds in the following cases. (This information will  
not display correctly if a conversion lens (sold separately) is being used.)  
When the focus mode is switched from automatic to manual  
When you set focus manually  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7ꢄ  
     
SCENE SELECTION  
You can record images effectively in various situations.  
Steps  
In recording mode, (OPTION)  
[SCENE SELECTION] a desired setting  
Automatically records images effectively without the [SCENE SELECTION]  
function.  
AUTO  
Maintains the darkening atmosphere of the distant  
surroundings in twilight scenes.  
TWILIGHT* (  
)
Maintains the dim atmosphere of a candlelit scene.  
CANDLE ( )  
SUNRISE&SUNSET*  
Reproduces the atmosphere of scenes such as sunsets or  
sunrises.  
(
)
Takes spectacular shots of fireworks.  
FIREWORKS* (  
)
Shoots distant subjects clearly. This setting also prevents  
your camcorder from focusing on glass or metal mesh in  
windows between the camcorder and the subject.  
LANDSCAPE*(  
PORTRAIT (Soft  
)
Brings out the subject such as people or flowers while  
creating a soft background.  
portrait) (  
)
Prevents people’s faces from appearing excessively white  
when subjects are lit by strong light.  
SPOTLIGHT**(  
)
Select to minimize shake when shooting fast moving  
subjects.  
SPORTS** (  
BEACH** (  
SNOW** (  
)
Takes the vivid blue of the ocean or a lake.  
Takes bright pictures of a white landscape.  
)
)
*
Adjusted to focus on subjects farther away only.  
** Adjusted not to focus on subjects a short distance away.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
77  
     
Notes  
If you set [SCENE SELECTION], [WHITE BAL.] setting is canceled.  
WHITE BAL. (White balance)  
You can adjust the color balance to the brightness of the recording environment.  
Steps  
In recording mode, (OPTION)  
[WHITE BAL.] a desired setting  
AUTO  
The white balance is adjusted automatically.  
The white balance is appropriately adjusted for the following recording  
conditions:  
Outdoors  
OUTDOOR (  
)
Night views, neon signs and fireworks  
Sunrise or sunset  
Under daylight fluorescent lamps  
The white balance is appropriately adjusted for the following recording  
conditions:  
Indoors  
INDOOR ()  
At party scenes or studios where the lighting conditions change quickly  
Under video lamps in a studio, or under sodium lamps or incandescent-  
like color lamps  
The white balance will be adjusted according to the ambient light.  
Touch [ONE PUSH].  
Frame a white object such as a piece of paper, to fill the screen under the  
same lighting conditions as you will shoot the subject.  
ONE PUSH (  
)
Touch [  
flashes quickly. When the white balance has been adjusted and stored in  
the memory, the indicator stops flashing.  
].  
Notes  
Set [WHITE BAL.] to [AUTO] or adjust the color in [ONE PUSH] under white or cool white fluorescent  
lamps.  
When you select [ONE PUSH], keep framing white objects while  
flashes slowly if [ONE PUSH] could not be set.  
is flashing quickly.  
When [ONE PUSH] was selected, if  
[AUTO].  
keeps flashing after touching  
, set [WHITE BAL.] to  
If you set [WHITE BAL.], [SCENE SELECTION] is set to [AUTO].  
Tips  
If you have changed the battery pack while [AUTO] was selected, or taken your camcorder outdoors after  
inside use (or vice versa), select [AUTO] and aim your camcorder at a nearby white object for about 10  
seconds for better color balance adjustment.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7ꢅ  
   
When the white balance has been set with [ONE PUSH], if the lighting conditions changed by bringing  
your camcorder outdoors from inside the house, or vice versa, you need to redo the [ONE PUSH]  
procedure to readjust the white balance.  
FADER  
You can record a transition with the following effects adding to the interval between scenes.  
Select the desired effect in [STBY] (to fading in) or [REC] (to fading out) mode.  
Steps  
In recording mode, (OPTION)  
[FADER] a desired setting  
OFF  
Does not use an effect.  
Out  
In  
In  
WHITE FADER  
Fades in/out with the white effect.  
Fades in/out with the black effect.  
Out  
BLACK FADER  
To cancel the fader before starting the operation, touch [OFF].  
Tips  
When you press START/STOP, the setting is cleared.  
BLT-IN ZOOM MIC (Built-in zoom microphone)  
You can record a movie with directional sound as you zoom in or out.  
Steps  
In recording mode, (OPTION)  
[BLT-IN ZOOM MIC] a desired setting  
OFF  
The microphone does not record sound following zooming in or out.  
The microphone records sound following  
zooming in or out.  
ON (  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
7ꢆ  
     
MICREF LEVEL (Microphone reference level)  
You can select the microphone level for recording sound.  
Steps  
In recording mode, (OPTION)  
[MICREF LEVEL] a desired setting  
NORMAL  
Records various ambient sounds, converting them into the appropriate level.  
Records ambient sound faithfully. Select [LOW] when you want to record  
an exciting and powerful sound in a concert hall, etc. (This setting is not  
suitable for recording conversations.)  
LOW (  
)
SELF-TIMER  
Press PHOTO to start the count down. A photo is recorded after about 10 seconds.  
Steps  
In recording mode, (OPTION)  
[SELF-TIMER] a desired setting  
OFF  
Cancels the self-timer.  
Starts the self-timer recording. To cancel the recording, touch [RESET].  
ON (  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢅ0  
     
Troubleshooting  
The plug of the AC Adaptor has been  
disconnected from the wall outlet (wall  
socket). Connect it to the wall outlet (wall  
socket) (p. 15).  
Troubleshooting  
If you run into any problems using your  
camcorder, use the following list to  
troubleshoot the problem. If the problem  
persists, disconnect the power source and  
contact your Sony dealer.  
The camcorder does not operate even  
when the power is set to on.  
It takes a few seconds for your camcorder to  
be ready to shoot after the power is turned on.  
This is not a malfunction.  
Disconnect the AC Adaptor from the wall  
outlet (wall socket) or remove the battery  
pack, then reconnect it after about 1 minute.  
If the functions still do not work, press RESET  
(p. 7) using a pointed object. (If you press  
RESET, all settings, including the clock setting,  
are reset.)  
...........................................................................p. 81  
Batteries/power sources ................................p. 82  
LCD screen ......................................................p. 82  
“Memory Stick PRO Duo” media.................p. 82  
Recording.........................................................p. 83  
Playback ...........................................................p. 84  
Playing back images stored on “Memory Stick  
Editing movies/photos on your camcorder  
...........................................................................p. 84  
Connecting/Dubbing to other devices.........p. 85  
Functions that cannot be used simultaneously  
...........................................................................p. 85  
Buttons do not work.  
During Easy Handycam operation, the  
playback zoom (p. 37) function is not  
available.  
Notes before sending your camcorder  
for repair  
The (OPTION) button is not displayed.  
The OPTION MENU cannot be used during  
Easy Handycam operation.  
Your camcorder may be required to initialize  
or change the current internal memory of your  
camcorder, depending on the problem. In the  
event of this, the data stored on the internal  
memory will be deleted. Be sure to save the  
data on the internal memory on other media  
(backup) before sending your camcorder for  
repair (p. 50, see Operating Guide too). We  
will not compensate you for any loss of internal  
memory data.  
During repair, we may check a minimum  
amount of data stored on the internal memory  
in order to investigate the problem. However,  
your Sony dealer will neither copy nor retain  
your data.  
The menu settings have changed  
automatically.  
During Easy Handycam operation, nearly all  
the menu items will be automatically set to the  
default settings.  
Some menu items, such as [ IMAGE SIZE],  
retain the settings that were made before Easy  
Handycam operation.  
During Easy Handycam operation, some  
menu items are fixed as follows.  
[REC MODE]: [SP]  
[DATA CODE]: [DATE/TIME]  
Some menu items retain the setting made  
during Easy Handycam operation even after  
Easy Handycam operation is finished.  
The following items return to the default  
settings in more than 12 hours after you close  
the LCD screen.  
Overall operations/Easy Handycam  
operation  
The power does not turn on.  
[SPOT MTR/FCS]  
[SPOT METER]  
Attach a charged battery pack to the  
camcorder (p. 15).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢅ1  
   
[SPOT FOCUS]  
[EXPOSURE]  
[FOCUS]  
enough. Fully charge the battery again. If the  
problem persists, replace the battery pack with  
a new one (p. 95).  
[SCENE SELECTION]  
[WHITE BAL.]  
[BLT-IN ZOOM MIC]  
[MICREF LEVEL]  
Backlight  
The indicated time may not be correct  
depending on the environment of use.  
The battery pack is quickly discharged.  
The ambient temperature is too high or low.  
This is not a malfunction.  
The battery pack has not been charged  
enough. Fully charge the battery again. If the  
problem persists, replace the battery pack with  
a new one (p. 95).  
Your camcorder gets warm.  
Your camcorder may become warm during  
operation. This is not a malfunction.  
Batteries/power sources  
The power abruptly turns off.  
LCD screen  
Menu items are grayed out.  
Use the AC Adaptor.  
In the default setting, when about 5 minutes  
have elapsed while you do not operate your  
camcorder, the camcorder is automatically  
turned off (A.SHUT OFF). Change the setting  
of [A.SHUT OFF] (p. 72), or turn on the  
power again.  
You cannot select grayed items in the current  
recording/playback situation.  
There are some functions you cannot activate  
simultaneously (p. 85).  
The buttons do not appear on the touch  
panel.  
Charge the battery pack (p. 15).  
Touch the LCD screen lightly.  
Press DISP (p. 31).  
The CHG (charge) lamp does not light  
while the battery pack is being charged.  
Close the LCD screen (p. 15).  
Attach the battery pack to the camcorder  
correctly (p. 15).  
Connect the power cord (mains lead) to the  
wall outlet (wall socket) properly.  
The battery charge is completed (p. 15).  
The buttons on the touch panel do not  
work correctly or do not work at all.  
Adjust the touch panel [CALIBRATION]  
“Memory Stick PRO Duomedia  
The CHG (charge) lamp flashes while the  
battery pack is being charged.  
Operations using the “Memory Stick PRO  
Duomedia cannot be performed.  
Attach the battery pack to the camcorder  
correctly (p. 15). If the problem persists,  
disconnect the AC Adaptor from the wall  
outlet (wall socket) and contact your Sony  
dealer. The battery pack may be damaged.  
If you use “Memory Stick PRO Duo” media  
formatted on a computer, format it again on  
your camcorder (p. 58).  
Images stored on the “Memory Stick PRO  
Duomedia cannot be deleted.  
The remaining battery time indicator does  
not indicate the correct time.  
The maximum number of images that you can  
delete on the index screen at one time is 100.  
You cannot delete the protected images.  
The ambient temperature is too high or too  
low. This is not a malfunction.  
The battery pack has not been charged  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢅꢀ  
     
The data file name is not indicated  
correctly or flashes.  
the point that the recording movie is  
started or stopped actually.  
The file is damaged.  
The file format is not supported by your  
camcorder (p. 94).  
On your camcorder, there may be a slight  
time difference between the point where you  
press START/STOP and the actual point that  
recording movie starts/stops. This is not a  
malfunction.  
Recording  
The auto focus does not function.  
Refer also to “Memory Stick PRO Duo”  
media (p. 82).  
Set [FOCUS] to [AUTO] (p. 76).  
The recording conditions are not suitable for  
auto focus. Adjust the focus manually (p. 76).  
Pressing START/STOP or PHOTO does not  
record images.  
SteadyShot does not function.  
The playback screen is displayed. Press MODE  
to turn on the  
Your camcorder is recording the image you  
have just shot on the recording media. You  
cannot make new recording during this  
period.  
The recording media is full. Delete  
unnecessary images (p. 41).  
Total number of movie scenes or photos  
exceeds the recordable capacity of your  
camcorder (p. 88). Delete unnecessary images  
(Movie) or (Photo) lamp  
Set [ STEADYSHOT] to [ON] (p. 61).  
Even if [ STEADYSHOT] is set to  
[ON], your camcorder may not be able to  
compensate for excessive vibrations.  
A vertical band appears when recording  
candlelight or electric light in the dark.  
This occurs when the contrast between the  
subject and the background is too high. This is  
not a malfunction.  
A vertical white line may appear on an  
image taken in bright light.  
The access lamp remains lit or flashing  
even if recording was stopped.  
This phenomenon is called the smear effect.  
This is not a malfunction.  
Your camcorder is recording the scene you  
have just shot on the recording media.  
Black bands appear when you record a TV  
screen or computer screen.  
The imaging field looks different.  
Set [ STEADYSHOT] to [OFF] (p. 61).  
The imaging field may look different  
depending on the condition of your  
camcorder. This is not a malfunction.  
Undesirable flicker occurs.  
This occurs when recording images under a  
fluorescent lamp, sodium lamp, or mercury  
lamp. This is not a malfunction.  
The actual recording time for movies is  
less than the expected recording time of  
the recording media.  
[LCD BL LEVEL] cannot be adjusted.  
Depending on the recording conditions, the  
time available for recording may be shorter, for  
example when recording a fast moving object,  
etc. (p. 88).  
You cannot adjust [LCD BL LEVEL] when:  
The LCD panel is closed on your camcorder  
with the LCD screen facing out.  
The power is supplied from the AC Adaptor.  
There is a time difference between the  
point when START/STOP is pressed and  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢅꢁ  
 
Playback  
computers or other devices.  
Change the sound conversion type (downmix  
type) when playing back on 2ch stereo devices.  
Refer to the instruction manual supplied with  
your playback device for details.  
Change the sound to 2ch when creating a disc  
using the supplied software “PMB.”  
Images cannot be played back.  
Select the recording media you want to play  
back by touching (HOME)  
(MANAGE MEDIA) [MOVIE MEDIA  
SET]/[PHOTO MEDIA SET] (p. 55).  
Playing back images stored on  
“Memory Stick PRO Duomedia on  
other devices  
Photos cannot be played back.  
Photos cannot be played back if you have  
modified files or folders, or have edited the  
data on a computer. (The file name flashes in  
that case.) This is not a malfunction.  
Photos recorded on other devices may not be  
played back. This is not a malfunction.  
Images cannot be played back or the  
“Memory Stick PRO Duomedia is not  
recognized.  
The device may not support “Memory Stick  
PRO Duo” media.  
is indicated on an image on the  
VISUAL INDEX screen.  
This may appear on an image recorded on  
other devices, edited on a computer, etc.  
You removed the AC Adaptor or the battery  
pack before the access lamp is turned off after  
recording. This may damage your image data  
Editing movies/photos on your  
camcorder  
Unable to edit.  
and  
is displayed.  
Unable to edit because of the condition of the  
image.  
is indicated on an image on the  
VISUAL INDEX screen.  
Movies cannot be added in the Playlist.  
The image data base file may be damaged.  
Check the data base file by touching  
There is no free space in the recording media.  
You can add no more than 99 movies to a  
Playlist. Erase unnecessary movies from the  
Playlist (p. 49).  
(HOME)   
(MANAGE MEDIA)  
[REPAIR IMG.DB F.] the recording  
medium. If it still appears, delete the image  
with  
You cannot add photos in the Playlist.  
No sound or only a quiet sound is heard  
during playback.  
A movie cannot be divided.  
A movie that is too short cannot be divided.  
A protected movie cannot be divided.  
Turn up the volume (p. 33).  
Sound is not output when the LCD screen is  
closed. Open the LCD screen.  
When you record sound with [MICREF  
LEVEL] (p. 80) set to [LOW], the recorded  
sound may be difficult to hear.  
A photo cannot be captured from a  
movie.  
The recording media where you want to save  
photos is full.  
Left and right sound will be heard  
unbalanced when playing back movies on  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢅꢂ  
         
Connecting/Dubbing to other  
devices  
You cannot hear the sound on the TV  
connected to your camcorder.  
C:(or E:) : (Self-diagnosis display)  
C:04:  
The battery pack is not an “InfoLITHIUM”  
battery pack (H series). Use an  
“InfoLITHIUM” battery pack (H series)  
Connect the DC plug of the AC Adaptor to the  
DC IN jack of your camcorder securely (p. 15).  
When you are using the S VIDEO plug,  
make sure the red and white plugs of the A/V  
connecting cable are connected (p. 39).  
  
The aspect ratio of the playback is not  
correct when connecting your camcorder  
to the TV.  
Set [TV TYPE] according to your TV (p. 40).  
C:13:  
/ C:32:  
  
  
Images are not dubbed correctly.  
Remove the power source. Reconnect it and  
operate your camcorder again.  
The A/V connecting cable is not connected  
properly. Make sure to connect the cable to the  
input jack of another device (p. 53).  
E:20:  
E:91:  
/ E:31:  
/ E:94:  
/ E:61:  
/ E:62:  
  
/
  
  
  
  
  
A malfunction that you cannot service has  
occurred. Contact your Sony dealer or local  
authorized Sony service facility. Inform them  
of the 5-digit code, which starts from “E.”  
Functions that cannot be used  
simultaneously  
The following list shows examples of  
unworkable combinations of functions and  
menu items.  
101-0001 (Warning indicator pertaining  
to files)  
Slow flashing  
Cannot use  
Because of following settings  
The file is damaged.  
The file is unreadable.  
[SCENE  
SELECTION]  
[FADER], [TELE MACRO]  
Backlight  
[SPOT MTR/FCS], [SPOT  
METER], [MANUAL]  
in [EXPOSURE],  
(Battery level warning)  
Slow flashing  
The battery pack is nearly used up.  
Depending on the operating environment or  
[FIREWORKS]  
battery conditions,  
are about 20 minutes remaining.  
may flash, even if there  
Self-diagnosis display/Warning  
indicators  
If indicators appear on the LCD screen,  
check the following.  
(Warning indicator pertaining to  
“Memory Stick PRO Duomedia)  
If the problem persists even after you  
have tried to fix a couple of times, contact  
your Sony dealer or local authorized Sony  
service facility.  
Slow flashing  
Free spaces for recording images are running  
out. For the type of “Memory Stick” media you  
can use with your camcorder, see page 55.  
No “Memory Stick PRO Duo” media is  
inserted (p. 56).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢅꢃ  
       
Fast flashing  
Description of warning messages  
There are not enough free space for recording  
images. After storing the images on other  
media (p. 50, see Operating Guide too), delete  
unnecessary images, or format the “Memory  
Stick PRO Duo” media (p. 58).  
The image data base file may be damaged.  
Check the data base file by touching  
(HOME)   
[REPAIR IMG.DB F.] the recording  
medium.  
If messages appear on the screen, follow the  
instructions.  
Recording media  
Internal memory format error.  
(MANAGE MEDIA)  
The internal memory of the camcorder  
is set differently from the default format.  
Performing [MEDIA FORMAT] (p. 58) may  
enable you to use your camcorder. This will  
delete all data in the internal memory.  
The “Memory Stick PRO Duo” media is  
damaged.  
(Warning indicators pertaining  
to “Memory Stick PRO Duomedia  
formatting)  
Data error.  
An error occurred during reading or writing  
the internal memory of the camcorder.  
The “Memory Stick PRO Duo” media is  
damaged.  
The “Memory Stick PRO Duo” media is not  
formatted correctly (p. 58).  
The Image Database File is damaged. Do  
you want to create a new file?  
The image management file is damaged. When  
you touch [YES], a new image management  
file is created. The old recorded images on the  
media cannot be played back (Image files are  
not damaged). If you execute [REPAIR IMG.  
DB F.] after creating new information, playing  
back the old recorded images may become  
possible. If it does not work, copy the image  
using the supplied software.  
(Warning indicator pertaining to  
incompatible “Memory Stick Duomedia)  
Incompatible “Memory Stick Duo” media are  
inserted (p. 55).  
(Warning indicator pertaining to  
the write-protect of the “Memory Stick  
PRO Duomedia)  
Access to the “Memory Stick PRO Duo” media  
was restricted on another device.  
Inconsistencies found in Image Database  
File. Do you want to repair the Image  
Database File?  
The Image Database File is damaged. Do  
you want to repair the Image Database  
File?  
(Warning indicator pertaining to  
camera-shake warning)  
The camcorder is unsteady, so camera-shake  
easily occurs. Hold the camcorder steady with  
both hands and record the image. However,  
note that the camera-shake warning indicator  
does not disappear.  
The image management file is damaged, and  
you cannot record movies or photos. Touch  
[YES] to repair.  
You can record photos on “Memory Stick PRO  
Duo” media.  
(Warning indicator pertaining to  
photo recording)  
Recovering data.  
The recording media is full.  
Your camcorder tries to recover data  
automatically if the data writing was not  
performed properly.  
Tips  
You may hear a melody when some warning  
indicators appear on the screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢅꢄ  
 
Deleting images  
Protecting images, or releasing the protection  
Dubbing movies  
Cannot recover data.  
Writing data onto the recording media of the  
camcorder has failed. Attempts were made to  
recover the data, but they were unsuccessful.  
Copying photos  
Data protected.  
Reinsert the Memory Stick.  
You tried to delete protected data. Release the  
protection of the data.  
Reinsert the “Memory Stick PRO Duo” media  
a few times. If even then the indicator flashes,  
the “Memory Stick PRO Duo” media could  
be damaged. Try with another “Memory Stick  
PRO Duo” media.  
This Memory Stick is not formatted  
correctly.  
Check the format, then format the “Memory  
Stick PRO Duo” media with your camcorder if  
necessary (p. 58).  
Still picture folder is full. Cannot record  
still pictures.  
You cannot create folders exceeding  
999MSDCF. You cannot create or delete  
created folders using your camcorder.  
Format the “Memory Stick PRO Duo” media  
(p. 58), or delete folders using your computer.  
This Memory Stick may not be able to  
record or play movies.  
Use “Memory Stick” media recommended for  
your camcorder (p. 55).  
This Memory Stick may not be able to  
record or play images correctly.  
Use “Memory Stick” media recommended for  
your camcorder (p. 55).  
Do not eject the Memory Stick during  
writing. Data may be damaged.  
Reinsert the “Memory Stick PRO Duo” media,  
and follow the instructions on the LCD screen.  
Other  
No further selection is possible.  
You can select only 100 images at one time for:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢅ7  
Additional information  
Internal.memory/.“Memory.Stick.PRO.Duo”.media  
(unit: minute)  
Battery pack  
Recording time of  
movies/number of  
recordable photos  
NP-FH30  
(supplied)  
135  
NP-FH50  
NP-FH70  
NP-FH100  
220  
465  
1045  
Expected time of recording and  
playback with each battery pack  
Recording time  
Approximate time available when you use a  
fully charged battery pack.  
Expected recording time of movies  
Internal memory  
Internal.memory/.“Memory.Stick.PRO.Duo”.media  
DCR-SX30E/SX40E:  
(unit: minute)  
Battery pack  
Continuous  
recording time  
100  
Typical recording  
time  
(unit: minute)  
Recording time  
Recording mode  
[HQ]  
[SP]  
NP-FH30  
(supplied)  
NP-FH50  
NP-FH70  
NP-FH100  
50  
55 (50)  
85 (50)  
175 (115)  
165  
350  
785  
80  
170  
390  
[LP]  
DCR-SX31E/SX41E:  
(unit: minute)  
Each recording time is measured when the  
[REC MODE] is set to SP.  
Typical recording time shows the time when  
you repeat recording start/stop, switching the  
MODE lamp, and zooming.  
Times measured when using the camcorder at  
25 C (77 ˚F) (10 C to 30 C (50 ˚F to 86 ˚F) is  
recommended).  
Recording mode  
[HQ]  
[SP]  
Recording time  
120 (105)  
170 (105)  
360 (230)  
[LP]  
DCR-SX50E/SX60E:  
The recording and playback time will be  
shorter when you use your camcorder in low  
temperatures.  
The recording and playback time will be shorter  
depending on the conditions under which you  
use your camcorder.  
(unit: minute)  
Recording mode  
[HQ]  
[SP]  
Recording time  
235 (210)  
340 (210)  
715 (460)  
[LP]  
Playing time  
Approximate time available when you use a  
fully charged battery pack.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢅꢅ  
     
Notes  
Expected number of recordable  
photos  
The number in ( ) is the minimum recordable  
time.  
Internal memory  
Tips  
You can record movies of a maximum of 9,999  
scenes.  
You can record the maximum 9,999 photos.  
“Memory Stick PRO Duomedia  
Your camcorder uses the VBR (Variable Bit  
Rate) format to automatically adjust image  
quality to suit the recording scene. This  
technology causes fluctuations in the recording  
time of the media. Movies containing quickly  
moving and complex images are recorded at  
a higher bit rate, and this reduces the overall  
recording time.  
VGA  
640 × 480  
512MB  
1GB  
2800  
5700  
2GB  
4GB  
8GB  
16GB  
11500  
23000  
47000  
94000  
“Memory Stick PRO Duomedia  
(unit: minute)  
HQ  
SP  
LP  
The number of recordable photos shown is for  
the maximum image size of your camcorder.  
The actual number of recordable photos is  
displayed on the LCD screen during recording  
(p. 8).  
512MB  
1GB  
6
(5)  
10  
(10)  
9
(5)  
20  
(10)  
20  
(10)  
40  
(25)  
2GB  
25  
(25)  
40  
(25)  
85  
(55)  
Notes  
Numbers in the table are based on using Sony  
“Memory Stick PRO Duo” media. The number  
of recordable photos may vary depending  
on the recording conditions, and the type of  
“Memory Stick” media.  
4GB  
55  
80  
170  
(50)  
(50)  
(110)  
8GB  
115  
(105)  
235  
(210)  
170  
(105)  
340  
(210)  
355  
(230)  
715  
(460)  
16GB  
Tips  
You can also use “Memory Stick Duo” media  
with a capacity of under 512 MB for recording  
photos.  
Notes  
Numbers in the table are based on using Sony  
“Memory Stick PRO Duo” media.  
The recordable time may vary depending on the  
recording and subject conditions, [REC MODE]  
(p. 60), and the type of “Memory Stick” media.  
The number in ( ) is the minimum recordable  
time.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢅꢆ  
     
Using your camcorder  
abroad  
Power supply  
You can use your camcorder in any  
countries/regions using the AC Adaptor  
supplied with your camcorder within the  
AC 100 V to 240 V, 50 Hz/60 Hz range.  
On TV color systems  
Your camcorder is a PAL-system-based  
camcorder. If you want to view the playback  
image on a TV, it must be a PAL-system-  
based TV with an AUDIO/VIDEO input  
jack.  
System  
Used in  
PAL  
Australia, Austria, Belgium,  
China, Czech Republic,  
Denmark, Finland, Germany,  
Holland, Hong Kong, Hungary,  
Italy, Kuwait, Malaysia, New  
Zealand, Norway, Poland,  
Portugal, Singapore, Slovak  
Republic, Spain, Sweden,  
Switzerland, Thailand, United  
Kingdom, etc.  
PAL-M  
PAL-N  
NTSC  
Brazil  
Argentina, Paraguay, Uruguay  
Bahama Islands, Bolivia,  
Canada, Central America,  
Chile, Colombia, Ecuador,  
Guyana, Jamaica, Japan,  
Korea, Mexico, Peru, Surinam,  
Taiwan, the Philippines, the  
USA, Venezuela, etc.  
SECAM  
Bulgaria, France, Guiana, Iran,  
Iraq, Monaco, Russia, Ukraine,  
etc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢆ0  
 
Setting to the local time  
You can easily set the clock to the local time by setting a time difference when using your  
camcorder abroad. Touch (HOME)   
(SETTINGS) [CLOCK/ LANG]   
[AREA SET] and [SUMMERTIME] (p. 71).  
World time difference  
Time-zone  
differences  
Area setting  
Time-zone  
differences  
Area setting  
–09:00  
–08:00  
–07:00  
–06:00  
–05:00  
–04:00  
–03:30  
–03:00  
–02:00  
–01:00  
Alaska  
GMT  
Lisbon, London  
Berlin, Paris  
Helsinki, Cairo, Istanbul  
Moscow, Nairobi  
Tehran  
Abu Dhabi, Baku  
Kabul  
Karachi, Islamabad  
Calcutta, New Delhi  
Almaty, Dhaka  
Yangon  
Los Angeles, Tijuana  
Denver, Arizona  
Chicago, Mexico City  
New York, Bogota  
Santiago  
+01:00  
+02:00  
+03:00  
+03:30  
+04:00  
+04:30  
+05:00  
+05:30  
+06:00  
+06:30  
+07:00  
+08:00  
St.John’s  
Brasilia, Montevideo  
Fernando de Noronha  
Azores, Cape Verde Is.  
Bangkok, Jakarta  
Hong Kong, Singapore,  
Beijing  
+09:00  
+09:30  
+10:00  
+11:00  
+12:00  
Seoul, Tokyo  
Adelaide, Darwin  
Melbourne, Sydney  
Solomon Is  
Fiji, Wellington, Eniwetok,  
Kwajalein  
–11:00  
–10:00  
Samoa  
Hawaii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢆ1  
 
File/folder structure on the internal memory and  
“Memory Stick PRO Duomedia  
The file/folder structure is shown below. You do not usually need to acknowledge the file/  
folder structure, when recording/playing back movies and photos on the camcorder. To enjoy  
movies or photos by connecting your camcorder to a computer, see “PMB Guide” then use the  
supplied application.  
* Only for the internal memory  
The folder name goes up: [101MSDCF]  
Image management files  
[102MSDCF]  
When you delete the files, you cannot  
record/play back the images correctly.  
The files are defaulted as hidden files  
and not usually displayed.  
By setting  
(HOME) (OTHERS)   
[USB CONNECT] [ USB CONNECT]/  
[
USB CONNECT], you can access the  
recording media from the computer through  
USB connection.  
Movie files (MPEG2 files)  
Access from the computer using the supplied  
software “PMB.” Do not modify the files  
or folders on the camcorder through the  
computer without using the supplied computer  
application. The image files may be destroyed  
or may not be played back.  
The extension of the files is .MPG.  
The maximum size is 2 GB. When the  
capacity of a file exceeds 2 GB, the file  
becomes divided.  
The file numbers go up automatically.  
When the capacity of a file number  
exceeds 9999, another folder is created  
to record new movie files.  
Operation is not guaranteed, if you perform the  
above operation.  
When you delete image files, follow the steps  
on page 41. Do not delete the image files on the  
camcorder directly from the computer.  
Do not format the recording media using a  
computer. The camcorder may not operate  
correctly.  
Do not copy the files on the recording  
media from the computer. Operation is not  
guaranteed.  
The folder name goes up: [101PNV01]  
[102PNV01]  
Photo files (JPEG files)  
The extension of the files is .JPG. The  
file numbers go up automatically. When  
the capacity of a file number exceeds  
9999, another folder is created to store  
new photo files.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢆꢀ  
 
media, or turn off your camcorder while your  
camcorder is reading or writing image files on  
the “Memory Stick PRO Duo” media (while  
the access lamp is lit or flashing)  
Maintenance and  
precautions  
If you use the “Memory Stick PRO Duo”  
media near magnets or magnetic fields  
It is recommended that you make a back-up of  
important data on the hard disk of a computer.  
Be careful not to apply excessive force when  
writing a memo area on “Memory Stick PRO  
Duo” media.  
Do not attach a label or the like on “Memory  
Stick PRO Duo” media or “Memory Stick Duo”  
media adaptor.  
When you carry or store “Memory Stick PRO  
Duo” media, put it in its case.  
Do not touch, or allow metallic objects to come  
into contact with the terminals.  
Do not bend, drop or apply strong force to the  
“Memory Stick PRO Duo” media.  
Do not disassemble or modify the “Memory  
Stick PRO Duo” media.  
Do not let the “Memory Stick PRO Duo” media  
get wet.  
Keep the “Memory Stick PRO Duo” media out  
of the reach of small children. There is danger  
that a child might swallow it.  
About the “Memory Stickmedia  
“Memory Stick” media are a compact,  
portable IC recording medium with a large  
data capacity.  
You can use only “Memory Stick Duo”  
media, which are about the half size of  
standard “Memory Stick” media, with your  
camcorder.  
However, we do not guarantee the  
operation of all types of “Memory Stick  
Duo” media on your camcorder.  
Types of“Memory Stick”media  
Recording/Playback  
“Memory Stick Duo”  
media (with MagicGate)  
“Memory Stick PRO  
Duo” media  
“Memory Stick PRO-HG  
Duo” media  
*  
Do not insert anything other than “Memory  
Stick PRO Duo” media into the “Memory  
Stick Duo” media slot. Doing so may cause a  
malfunction.  
Do not use or keep the “Memory Stick PRO  
Duo” media in the following locations:  
Places subject to extremely high temperature,  
such as a car parked outside in the summer  
Places under direct sunlight  
* This product does not support 8-bit parallel  
data transfer but it supports 4-bit parallel data  
transfer the same as with “Memory Stick PRO  
Duo” media.  
This product cannot record or play data that  
uses “MagicGate” technology. “MagicGate” is  
a copyright protection technology that records  
and transfers the contents in an encrypted  
format.  
This product is compatible with “Memory Stick  
Micro” media (“M2”). “M2” is the abbreviation  
for the “Memory Stick Micro” media.  
“Memory Stick PRO Duo” media formatted by a  
computer (Windows OS/Mac OS) does not have  
guaranteed compatibility with your camcorder.  
Data read/write speed may vary depending on  
the combination of the “Memory Stick PRO  
Duo” media and “Memory Stick PRO Duo”  
media compliant product you use.  
Places with extremely high humidity or  
subject to corrosive gases  
On the “Memory Stick Duomedia  
adaptor  
When using “Memory Stick PRO Duo” media  
with “Memory Stick” media compliant device,  
be sure to insert the “Memory Stick PRO Duo”  
media into “Memory Stick Duo” media adaptor.  
When using “Memory Stick PRO Duo” media  
with “Memory Stick” media compliant device  
inserting “Memory Stick PRO Duo” media  
into “Memory Stick Duo” media adaptor, make  
sure the “Memory Stick PRO Duo” media are  
inserted facing in the correct direction. Note  
Damaged or lost data may occur in the  
following cases (the data will not be  
compensated for):  
If you eject the “Memory Stick PRO Duo”  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢆꢁ  
 
that improper use may cause a malfunction.  
When using “Memory Stick PRO Duo” media  
inserted into “Memory Stick Duo” media  
adaptor on “Memory Stick” media compliant  
device, make sure the “Memory Stick PRO  
Duo” media adaptor is inserted into the device  
in the correct direction. If inserted in the wrong  
direction, the device may be damaged.  
Do not insert “Memory Stick Duo” media  
adaptor without “Memory Stick PRO Duo”  
media attached into “Memory Stick” media  
compliant device. Doing so may result in  
malfunctions of the device.  
You may not be able to play back images with  
your camcorder:  
When playing back image data modified on  
your computer  
When playing back image data recorded with  
other devices  
About the “InfoLITHIUMbattery  
pack  
Your camcorder operates only with an  
“InfoLITHIUM” battery pack (H series).  
“InfoLITHIUM” H series battery packs  
On “Memory Stick PRO Duomedia  
have the  
mark.  
The maximum memory capacity of “Memory  
Stick PRO Duo” media that can be used with  
your camcorder is 16 GB.  
What is an “InfoLITHIUMbattery pack?  
An “InfoLITHIUM” battery pack is a  
lithium-ion battery pack that has functions  
for communicating information related to  
operating conditions between your camcorder  
and an AC Adaptor/charger (sold separately).  
The “InfoLITHIUM” battery pack calculates the  
power consumption according to the operating  
conditions of your camcorder, and displays the  
remaining battery time in minutes.  
Notes on using “Memory Stick Micro”  
media  
To use “Memory Stick Micro” media with your  
camcorder, you need a Duo-sized M2 Adaptor.  
Insert the “Memory Stick Micro” media into  
the Duo-sized M2 Adaptor, and then insert the  
adaptor into the “Memory Stick Duo” media  
slot. If you insert a “Memory Stick Micro”  
media into your camcorder without using a  
Duo-sized M2 Adaptor, you might not be able  
to remove it from your camcorder.  
To charge the battery pack  
Be sure to charge the battery pack before you  
start using your camcorder.  
We recommend charging the battery pack in an  
ambient temperature of between 10 C to 30 C  
(50 ˚F to 86 ˚F) until the CHG (charge) lamp  
turns off. If you charge the battery pack outside  
of this temperature range, you may not be able  
to charge it efficiently.  
Do not leave the “Memory Stick Micro” media  
within the reach of small children. They might  
accidentally swallow it.  
On image data compatibility  
Image data files recorded on “Memory Stick  
PRO Duo” media by your camcorder conform  
to the “Design rule for Camera File system”  
universal standard established by the JEITA  
(Japan Electronics and Information Technology  
Industries Association).  
On your camcorder, you cannot play back  
photos recorded on other devices (DCR-  
TRV900E or DSC-D700/D770) that do not  
conform to the universal standard. (These  
models are not sold in some regions.)  
If you cannot use “Memory Stick PRO Duo”  
media that have been used with another device,  
format it with your camcorder (p. 58). Note  
that formatting erases all information on the  
“Memory Stick PRO Duo” media.  
To use the battery pack effectively  
Battery pack performance decreases when the  
ambient temperature is 10 C (50 °F) or below,  
and the length of time you can use the battery  
pack becomes shorter. In that case, do one  
of the following to use the battery pack for a  
longer time.  
Put the battery pack in a pocket to warm it  
up, and install it on your camcorder right  
before you start taking shots.  
Use a large capacity battery pack: NP-FH70/  
FH100 (sold separately).  
Frequent use of the LCD screen or a frequent  
playback, fast forward or reverse operation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢆꢂ  
     
wears out the battery pack faster. We  
recommend using a large capacity battery pack:  
NP-FH70/FH100 (sold separately).  
Each batterys life is governed by storage,  
operating and environmental conditions.  
Be sure to close the LCD screen when not  
recording or playing back on your camcorder.  
The battery pack is also consumed when your  
camcorder is in recording standby or playback  
pause.  
Have spare battery packs ready for 2 or 3 times  
the expected recording time, and make trial  
recordings before making the actual recording.  
Do not expose the battery pack to water. The  
battery pack is not water resistant.  
About handling of your camcorder  
On use and care  
Do not use or store the camcorder and  
accessories in the following locations:  
Anywhere extremely hot, cold or humid.  
Never leave them exposed to temperatures  
above 60 C (140 °F), such as under direct  
sunlight, near heaters or in a car parked in  
the sun. They may malfunction or become  
deformed.  
Near strong magnetic fields or mechanical  
vibration. The camcorder may malfunction.  
Near strong radio waves or radiation. The  
camcorder may not be able to record properly.  
Near AM receivers and video equipment.  
Noise may occur.  
About the remaining battery time  
indicator  
When the power goes off even though the  
remaining battery time indicator indicates that  
the battery pack has enough power to operate,  
charge the battery pack fully again. Remaining  
battery time will be indicated correctly. Note,  
however, that the battery indication will not be  
restored if it is used in high temperatures for  
a long time, or if left in a fully charged state,  
or when the battery pack is frequently used.  
Use the remaining battery time indication as a  
rough guide only.  
On a sandy beach or anywhere dusty. If  
sand or dust gets in your camcorder, it may  
malfunction. Sometimes this malfunction  
cannot be repaired.  
Near windows or outdoors, where the LCD  
screen, or the lens may be exposed to direct  
sunlight. This damages the LCD screen.  
Operate your camcorder on DC 6.8 V/7.2 V  
(battery pack) or DC 8.4 V (AC Adaptor).  
For DC or AC operation, use the accessories  
recommended in these operating instructions.  
Do not let your camcorder get wet, for example,  
from rain or sea water. If your camcorder  
gets wet, it may malfunction. Sometimes this  
malfunction cannot be repaired.  
If any solid object or liquid gets inside the  
casing, unplug your camcorder and have it  
checked by a Sony dealer before operating it  
any further.  
Avoid rough handling, disassembling,  
modifying, physical shock, or impact such  
as hammering, dropping or stepping on the  
product. Be particularly careful of the lens.  
Keep the LCD screen closed when you are not  
using your camcorder.  
The mark that indicates low battery flashes  
even if there are still 20 minutes of battery  
time remaining, depending on the operating  
conditions or ambient temperature.  
About storage of the battery pack  
If the battery pack is not used for a long time,  
fully charge the battery pack and use it up on  
your camcorder once a year to maintain proper  
function. To store the battery pack, remove it  
from your camcorder and put it in a dry, cool  
place.  
To discharge the battery pack on your  
camcorder completely, touch  
(HOME)   
(SETTINGS) [GENERAL SET]   
[A.SHUT OFF] [NEVER], and leave your  
camcorder in recording standby until the power  
goes off (p. 72).  
Do not wrap your camcorder with a towel, for  
example, and operate it. Doing so might cause  
heat to build up inside.  
When disconnecting the power cord (mains  
lead), pull it by the plug and not the cord.  
About battery life  
Battery capacity decreases over time and  
through repeated use. If decreased usage time  
between charges becomes significant, it is  
probably time to replace it with a new one.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢆꢃ  
     
Do not damage the power cord (mains lead)  
such as by placing anything heavy on it.  
Do not use a deformed or damaged battery  
pack.  
LCD screen  
Do not exert excessive pressure on the LCD  
screen, as it may cause uneven color and other  
damage.  
If your camcorder is used in a cold place, a  
residual image may appear on the LCD screen.  
This is not a malfunction.  
While using your camcorder, the back of  
the LCD screen may heat up. This is not a  
malfunction.  
Keep metal contacts clean.  
If the battery electrolytic liquid has leaked:  
Consult your local authorized Sony service  
facility.  
Wash off any liquid that may have contacted  
your skin.  
If any liquid gets in your eyes, wash with  
plenty of water and consult a doctor.  
To clean the LCD screen  
If fingerprints or dust make the LCD screen  
dirty, it is recommended that you use a soft  
cloth to clean it.  
When you use the LCD Cleaning Kit (sold  
separately), do not apply the cleaning liquid  
directly to the LCD screen. Use cleaning paper  
moistened with the liquid.  
When not using your camcorder for a  
long time  
To keep your camcorder in optimum state for a  
long time, turn it on and let it run by recording  
and playing back images about once a month.  
Use up the battery pack completely before  
storing it.  
On adjustment of the touch panel  
(CALIBRATION)  
Moisture condensation  
If your camcorder is brought directly from a cold  
place to a warm place, moisture may condense  
inside your camcorder. This may cause a  
malfunction to your camcorder.  
If moisture condensation has occurred  
Leave your camcorder for about 1 hour without  
turning it on.  
The buttons on the touch panel may not work  
correctly. If this happens, follow the procedure  
below. It is recommended that you connect your  
camcorder to the wall outlet (wall socket) using  
the supplied AC Adaptor during the operation.  
Touch  
(HOME)   
(SETTINGS)   
[GENERAL SET] [CALIBRATION].  
Note on moisture condensation  
Moisture may condense when you bring your  
camcorder from a cold place into a warm place  
(or vice versa) or when you use your camcorder  
in a humid place as follows:  
You bring your camcorder from a ski slope  
into a place warmed up by a heating device.  
You bring your camcorder from an air  
conditioned car or room into a hot place  
outside.  
You use your camcorder after a squall or a  
shower.  
Touch “” displayed on the screen with the  
corner of “Memory Stick PRO Duo” media or  
the like 3 times.  
Touch [CANCEL] to cancel calibration.  
You use your camcorder in a hot and humid  
place.  
Notes  
If you did not press the right spot, try the  
calibration again.  
Do not use a sharp-pointed object for  
calibration. Doing so may damage the LCD  
screen.  
You cannot calibrate the LCD screen if it is  
rotated, or closed with the screen facing out.  
How to prevent moisture condensation  
When you bring your camcorder from a cold  
place into a warm place, put your camcorder in  
a plastic bag and seal it tightly. Remove the bag  
when the air temperature inside the plastic bag  
has reached the surrounding temperature (after  
about 1 hour).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢆꢄ  
   
hours.  
On handling the casing  
If the casing is soiled, clean the camcorder body  
with a soft cloth lightly moistened with water,  
and then wipe the casing with a dry soft cloth.  
Avoid the following to avoid damage to the  
finish:  
Using chemicals such as thinner, benzine,  
alcohol, chemical cloths, repellent, insecticide  
and sunscreen  
Handling the camcorder with above  
substances on your hands  
Leaving the casing in contact with rubber or  
vinyl objects for a long period of time  
Note on disposal/transfer of the  
“Memory Stick PRO Duomedia  
Even if you delete data in the “Memory Stick PRO  
Duo” media or format the “Memory Stick PRO  
Duo” media on your camcorder or a computer,  
you may not delete data from the “Memory Stick  
PRO Duo” media completely. When you give the  
“Memory Stick PRO Duo” media to somebody, it  
is recommended that you delete date completely  
using data deletion software on a computer. Also,  
when you dispose of the “Memory Stick PRO  
Duo” media, it is recommended that you destroy  
the actual body of the “Memory Stick PRO Duo”  
media.  
About care and storage of the lens  
Wipe the surface of the lens clean with a soft  
cloth in the following instances:  
When there are fingerprints on the lens  
surface  
In hot or humid locations  
When the lens is exposed to salty air such as  
at the seaside  
Store in a well-ventilated location subject to  
little dirt or dust.  
To prevent mold, periodically clean the lens as  
described above.  
On charging the pre-installed  
rechargeable battery  
Your camcorder has a pre-installed rechargeable  
battery to retain the date, time, and other settings  
even when the LCD screen is closed. The pre-  
installed rechargeable battery is always charged  
while your camcorder is connected to the wall  
outlet (wall socket) via the AC Adaptor or while  
the battery pack is attached. The rechargeable  
battery will be fully discharged in about 3 months  
if you do not use your camcorder at all. Use  
your camcorder after charging the pre-installed  
rechargeable battery.  
However, even if the pre-installed rechargeable  
battery is not charged, the camcorder operation  
will not be affected as long as you are not  
recording the date.  
How to charge the pre-installed  
rechargeable battery  
Connect your camcorder to a wall outlet (wall  
socket) using the supplied AC Adaptor, and leave  
it with the LCD screen closed for more than 24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢆ7  
On trademarks  
“Handycam” and  
Notes on the License  
are  
ANY USE OF THIS PRODUCT OTHER  
THAN CONSUMER PERSONAL USE IN ANY  
MANNER THAT COMPLIES WITH THE  
MPEG-2 STANDARD FOR ENCODING VIDEO  
INFORMATION FOR PACKAGED MEDIA  
IS EXPRESSLY PROHIBITED WITHOUT A  
LICENSE UNDER APPLICABLE PATENTS IN  
THE MPEG-2 PATENT PORTFOLIO, WHICH  
LICENSE IS AVAILABLE FROM MPEG LA,  
L.L.C., 250 STEELE STREET, SUITE 300,  
DENVER, COLORADO 80206.  
registered trademarks of Sony Corporation.  
“Memory Stick,” “  
,” “Memory Stick Duo,”  
,” “Memory Stick PRO  
,” “Memory  
Duo,” “  
Stick PRO-HG Duo,”  
,” “Memory Stick  
Micro,” “MagicGate,” “  
,”  
“MagicGate Memory Stick” and “MagicGate  
Memory Stick Duo” are trademarks or  
registered trademarks of Sony Corporation.  
“InfoLITHIUM” is a trademark of Sony  
Corporation.  
“C Library,” “Expat,” “zlib,” and “libjpeg” software  
are provided in your camcorder. We provide  
this software based on license agreements with  
their owners of copyright. Based on requests  
by the owners of copyright of these software  
applications, we have an obligation to inform  
you of the following. Please read the following  
sections.  
“DVDirect” is a trademark of Sony  
Corporation.  
Dolby and the double-D symbol are trademarks  
of Dolby Laboratories.  
Microsoft, Windows, Windows Media,  
Windows Vista, and DirectX are either  
registered trademarks or trademarks of  
Microsoft Corporation in the United States and/  
or other countries.  
Macintosh and Mac OS are registered  
trademarks of Apple Inc. in the U.S. and other  
countries.  
Read “license1.pdfin the “License” folder on the  
CD-ROM. You will find licenses (in English) of  
“C Library,” “Expat,” “zlib,” and “libjpeg” software.  
Intel, Intel Core, and Pentium are trademarks  
or registered trademarks of Intel Corporation  
or its subsidiaries in the United States and other  
countries.  
Adobe, the Adobe logo, and Adobe Acrobat  
are either registered trademarks or trademarks  
of Adobe Systems Incorporated in the United  
States and/or other countries.  
On GNU GPL/LGPL applied software  
The software that is eligible for the following  
GNU General Public License (hereinafter referred  
to as “GPL) or GNU Lesser General Public  
License (hereinafter referred to as “LGPL) are  
included in the camcorder.  
This informs you that you have a right to have  
access to, modify, and redistribute source code for  
these software programs under the conditions of  
the supplied GPL/LGPL.  
Source code is provided on the web. Use  
the following URL to download it. When  
downloading the source code, select DCR-SR87 as  
the model for your camcorder.  
All other product names mentioned herein may  
be the trademarks or registered trademarks of  
their respective companies. Furthermore,   
and are not mentioned in each case in this  
Handbook.  
http://www.sony.net/Products/Linux/  
We would prefer you do not contact us about the  
contents of source code.  
Read “license2.pdfin the “License” folder on the  
CD-ROM. You will find licenses (in English) of  
“GPL,” and “LGPLsoftware.  
To view the PDF, Adobe Reader is needed. If  
it is not installed on your computer, you can  
download it from the Adobe Systems web page:  
http://www.adobe.com/  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢆꢅ  
Index  
Dubbing.......................................44  
DVDirect Express.......................50  
DVD writer..................................52  
LCD BRIGHT .............................68  
LCD COLOR...............................69  
LP..................................................60  
Symbols  
16:9 .........................................40, 60  
4:3 ...........................................40, 60  
E
M
A
Easy Handycam Operation .......20  
EDIT.............................................47  
Empty...........................................59  
EXPOSURE.................................76  
Maintenance................................93  
MANAGE MEDIA.....................55  
MEDIA FORMAT......................58  
MEDIA INFO .............................57  
“Memory Stick” media.........55, 93  
“Memory Stick PRO-HG Duo”  
media......................................56, 93  
“Memory Stick PRO Duo” media  
.......................................... 55, 56, 92  
Menus.............................................9  
MICREF LEVEL.........................80  
Mirror mode ...............................31  
Moisture condensation ..............96  
MOVIE DUB ..............................44  
MOVIE MEDIA SET .................55  
Movies............................. 23, 26, 32  
MOVIE SETTINGS ...................60  
MPEG 2 .......................................92  
A.SHUT OFF ..............................72  
A/V connecting cable.................53  
Abroad .........................................90  
AREA SET...................................71  
AUTO SLW SHUTTR .........61, 64  
F
Face Index....................................35  
FACE SET....................................63  
FADER.........................................79  
File................................................92  
FILE NO.......................................64  
Film Roll Index ...........................35  
FIREWORKS ..............................77  
FOCUS.........................................76  
Folder ...........................................92  
Format..........................................58  
B
BATTERY INFO.........................54  
Battery pack.................................15  
BEACH ........................................77  
BEEP.............................................68  
BLACK FADER ..........................79  
BLT-IN ZOOM MIC..................79  
C
CALIBRATION..........................96  
CAMERA DATA ........................66  
CANDLE .....................................77  
Capturing a photo from  
a movie.........................................43  
G
GENERAL SET...........................72  
GUIDEFRAME.....................62, 65  
O
Charging the battery pack.........15  
Charging the battery pack  
abroad ....................................16, 90  
CLOCK/LANG...........................71  
CLOCK SET..........................17, 71  
Copy.............................................45  
Creating a disc ............................50  
ONE PUSH .................................78  
OPTION MENU ............. 9, 12, 74  
original.........................................44  
OTHERS......................................41  
OUTDOOR.................................78  
OUTPUT SETTINGS................70  
H
HELP function..............................9  
HOME MENU........................9, 11  
HQ................................................60  
I
Image management file..............92  
IMAGE SIZE...............................64  
INDOOR .....................................78  
“InfoLITHIUM” battery pack  
.......................................................94  
P
D
PAL...............................................90  
PB zoom.......................................37  
PHOTO CAPTURE...................43  
PHOTO COPY ...........................45  
PHOTO MEDIA SET ................55  
Photos ............................. 25, 28, 33  
PHOTO SETTINGS...................64  
Playing....................................23, 32  
Playlist..........................................48  
PMB Guide....................................2  
PORTRAIT..................................77  
DATA CODE ..............................66  
DATE/TIME..........................17, 66  
Date Index ...................................36  
DELETE.......................................41  
Deleting data.........................41, 58  
DEMO MODE............................72  
DIGITAL ZOOM .......................61  
DISC BURN ................................11  
Disc recorder...............................53  
DISP OUTPUT...........................70  
DIVIDE........................................47  
Internal memory.........................92  
J
JPEG.............................................92  
L
LANDSCAPE..............................77  
LANGUAGE SET.................18, 71  
LCD BL LEVEL ..........................68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢆꢆ  
 
Power on......................................17  
POWER ON BY LCD................73  
Precautions..................................93  
PROTECT ...................................46  
TV.................................................39  
TV color systems........................90  
TV TYPE.....................................70  
TWILIGHT.................................77  
R
U
REC MODE.................................60  
Recording ....................................26  
Recording and playback time ...88  
Recording media.........................55  
Recording time of movies/  
number of recordable photos....88  
REMAINING SET......................62  
REPAIR IMG.DB F...............84, 86  
RESET............................................7  
USB cable.....................................52  
USB CONNECT.........................52  
V
VBR ..............................................89  
VIEW IMAGES SET..................66  
Viewing..................................25, 33  
VISUAL INDEX ...................23, 32  
Volume.........................................33  
W
S
Warning messages......................86  
WHITE BAL. ..............................78  
WHITE FADER..........................79  
Wide angle...................................30  
WIDE SELECT...........................60  
SCENE SELECTION ...........77, 85  
Screen indicators ..........................8  
Self-diagnosis display/Warning  
indicators.....................................85  
SELF-TIMER...............................80  
Shooting.......................................28  
Slide show....................................38  
SLIDE SHOW SET.....................38  
SNOW..........................................77  
SOUND/DISP SET.....................68  
SP..................................................60  
SPORTS .......................................77  
SPOT FOCUS .............................75  
SPOTLIGHT...............................77  
SPOT METER.............................74  
SPOT MTR/FCS.........................74  
STEADYSHOT ...........................61  
SUMMERTIME..........................71  
SUNRISE&SUNSET...................77  
Supplied items.............................13  
Z
Zoom......................................30, 37  
T
TELE MACRO............................75  
Telephoto.....................................30  
Thumbnail...................................41  
Tripod.............................................7  
Troubleshooting..........................81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
100  
Additional information on this product and  
answers to frequently asked questions can  
be found at our Customer Support Website.  
http://www.sony.net/  
Download from Www.Somanuals.com. All Manuals Search And Download.  
101  

Sharper Image Air Cleaner SI871 User Manual
Snapper Lawn Mower 1031 User Manual
Snapper Lawn Mower 1600178 User Manual
Sony Clock Radio CFD E75L User Manual
Sony Personal Computer VGC RB40 User Manual
Sony VCR HVR M25E User Manual
Sterling Automobile Parts SFC A 40 User Manual
Sunbeam Egg Cooker EC4000 User Manual
Sunfire Range X24 4L User Manual
Sybase Server DC38029 01 0500 01 User Manual