4-279-067-11(2)
Blu-ray Disc/DVD
Home Theatre
System
Operating Instructions
BDV-L800/BDV-L800M/BDV-L600
Download from Www.Somanuals.com. All Manuals Search And Download.
disposal service or the shop where
you purchased the product.
On watching 3D video
images
Some people may experience
discomfort (such as eye strain,
fatigue, or nausea) while watching
3D video images. Sony
For the wireless
transceiver (EZW-
RT50) and the Blu-ray
Disc/DVD Home
Theatre System
(BDV-L600/BDV-L800/
BDV-L800M)
Notice for customers: the following
information is only applicable to
equipment sold in countries
applying EU directives.
recommends that all viewers take
regular breaks while watching 3D
video images. The length and
frequency of necessary breaks will
vary from person to person. You
must decide what works best. If you
experience any discomfort, you
should stop watching the 3D video
images until the discomfort ends;
consult a doctor if you believe
necessary. You should also review
(i) the instruction manual and/or the
caution message of any other
device used with, or Blu-ray Disc
contents played with this product
and (ii) our website (http://
esupport.sony.com/) for the latest
information. The vision of young
children (especially those under six
years old) is still under
development. Consult your doctor
(such as a pediatrician or eye
doctor) before allowing young
children to watch 3D video images.
Adults should supervise young
children to ensure they follow the
recommendations listed above.
(For the customers in
Europe)
The manufacturer of this product is
Sony Corporation, 1-7-1 Konan
Minato-ku Tokyo, 108-0075 Japan.
The Authorized Representative for
EMC and product safety is Sony
Deutschland GmbH, Hedelfinger
Strasse 61, 70327 Stuttgart,
See “Wireless Product Compliance
Information” (supplied).
Copy Protection
Please be advised of the advanced
Germany. For any service or
content protection systems used in
guarantee matters please refer to
the addresses given in separate
service or guarantee documents.
TM
both Blu-ray Disc and DVD
media. These systems, called
AACS (Advanced Access Content
System) and CSS (Content
For the customers in
Australia
This equipment should be installed
and operated with at least 20 cm
and more between the radiator and
person’s body (excluding
Scramble System), may contain
some restrictions on playback,
analog output, and other similar
features. The operation of this
product and the restrictions placed
may vary depending on the date of
purchase, as the governing board of
the AACS may adopt or change its
restriction rules after the time of
purchase.
extremities: hands, wrists, feet and
ankles).
For the main unit
The nameplate is located on the rear
exterior.
Copyrights and
Trademarks
Precautions
• This system incorporates with
Dolby* Digital and the DTS**
Digital Surround System.
* Manufacturedunder license
from Dolby Laboratories.
Dolby and the double-D
symbol are trademarks of
Dolby Laboratories.
For the wireless
transceiver (EZW-
RT50) and the Blu-ray
Disc/DVD receiver
(HBD-L800)
On power sources
• The unit is not disconnected from
the mains as long as it is
connected to the AC outlet, even
if the unit itself has been turned
off.
(For the customers in
Australia)
• As the main plug is used to
disconnect the unit from the
mains, connect the unit to an
easily accessible AC outlet.
Should you notice an abnormality
in the unit, disconnect the main
plug from the AC outlet
immediately.
**Manufacturedunder license
under U.S. Patent #’s:
5,451,942; 5,956,674;
5,974,380; 5,978,762;
6,226,616; 6,487,535;
This equipment should be installed
and operated with at least 20 cm
and more between the radiator and
person’s body (excluding
extremities: hands, wrists, feet and
ankles).
7,212,872; 7,333,929;
7,392,195; 7,272,567 &
other U.S. and worldwide
patents issued & pending.
DTS, DTS-HD and the
Symbol are registered
trademarks, & DTS-HD
Master Audio, and the DTS
GB
3
Download from Www.Somanuals.com. All Manuals Search And Download.
logos are trademarks of
DTS, Inc. Product includes
software. © DTS, Inc. All
Rights Reserved.
See the Gracenote website for a
nonexhaustive list of applicable
Gracenote patents. Gracenote,
CDDB, MusicID, MediaVOCS,
the Gracenote logo and logotype,
and the “Powered by Gracenote”
logo are either registered
trademarks or trademarks of
Gracenote in the United States
and/or other countries.
of Microsoft Corporation in the
United States and/or other
countries.
This product contains technology
subject to certain intellectual
property rights of Microsoft. Use
or distribution of this technology
outside of this product is
• This system incorporates High-
Definition Multimedia Interface
TM
(HDMI ) technology.
HDMI, the HDMI logo and High-
Definition Multimedia Interface
are trademarks or registered
trademarks of HDMI Licensing
LLC in the United States and
other countries.
prohibited without the appropriate
license(s) from Microsoft.
Content owners use Microsoft
™
PlayReady content access
technology to protect their
intellectual property, including
copyrighted content. This device
uses PlayReady technology to
access PlayReady-protected
content and/or WMDRM-
• Java is a trademark of Oracle and/
or its affiliates.
• The Wi-Fi CERTIFIED™ Logo
is a certification mark of the
Wi-Fi Alliance.
• “BD-LIVE” and
“BONUSVIEW” are trademarks
of Blu-ray Disc Association.
• “Blu-ray Disc” is a trademark.
• “Blu-ray Disc,” “DVD+RW,”
“DVD-RW,” “DVD+R,” “DVD-
R,” “DVD VIDEO,” and “CD”
logos are trademarks.
• The Wi-Fi Protected Setup™
Mark is a mark of the Wi-Fi
Alliance.
protected content. If the device
fails to properly enforce
restrictions on content usage,
content owners may require
Microsoft to revoke the device’s
ability to consume PlayReady-
protected content. Revocation
should not affect unprotected
content or content protected by
other content access technologies.
Content owners may require you
to upgrade PlayReady to access
their content. If you decline an
upgrade, you will not be able to
access content that requires the
upgrade.
• “Wi-Fi CERTIFIED™” and “Wi-
Fi Protected Setup™” are
trademarks of the Wi-Fi Alliance.
• “PhotoTV HD” and the “PhotoTV
HD” logo are trademarks of Sony
Corporation.
• “Blu-ray 3D” and “Blu-ray 3D”
logo are trademarks of Blu-ray
Disc Association.
• MPEG Layer-3 audio coding
technology and patents licensed
from Fraunhofer IIS and
Thomson.
• “BRAVIA” is a trademark of
Sony Corporation.
• “AVCHD” and the “AVCHD”
logo are trademarks of Panasonic
Corporation and Sony
• iPhone, iPod, iPod classic, iPod
nano, and iPod touch are
trademarks of Apple Inc.,
registered in the U.S. and other
countries.
Corporation.
•
, “XMB,” and “xross media
bar” are trademarks of Sony
Corporation and Sony Computer
Entertainment Inc.
®
• DLNA , the DLNA Logo and
™
DLNA CERTIFIED are
trademarks, service marks, or
certification marks of the Digital
Living Network Alliance.
• All other trademarks are
trademarks of their respective
owners.
• “PLAYSTATION” is atrademark
of Sony Computer Entertainment
Inc.
• “Made for iPod,” and “Made for
iPhone” mean that an electronic
accessory has been designed to
connect specifically to iPod or
iPhone, respectively, and has been
certified by the developer to meet
Apple performance standards.
Apple is not responsible for the
operation of this device or its
compliance with safety and
• Music and video recognition
technology and related data are
®
provided by Gracenote .
• Other system and product names
are generally trademarks or
registered trademarks of the
manufacturers. ™ and ® marks
are not indicated in this document.
Gracenote is the industry standard
in music recognition technology
and related content delivery. For
more information, please visit
CD, DVD, Blu-ray Disc, and
music and video-related data from
Gracenote, Inc., copyright ©
2000-present Gracenote.
Gracenote Software, copyright ©
2000-present Gracenote. One or
more patents owned by Gracenote
apply to this product and service.
regulatory standards. Please note
that the use of this accessory with
iPod or iPhone may affect
wireless performance.
• Windows Media is either a
registered trademark or trademark
GB
4
Download from Www.Somanuals.com. All Manuals Search And Download.
About These
Operating
Instructions
• The instructions in these
Operating Instructions
describe the controls on the
remote. You can also use the
controls on the main unit if
they have the same or similar
names as those on the remote.
• In this manual, “disc” is used
as a general reference for
BDs, DVDs, Super Audio
CDs, or CDs unless otherwise
specified by the text or
illustrations.
• The instructions in this
manual are for BDV-L800,
BDV-L800M, and BDV-
L600. BDV-L600 is the
model used for illustration
purposes. Any difference in
operation is clearly indicated
in the text, for example,
“BDV-L600 only.”
• Some illustrations are
presented as conceptual
drawings, and may be
different from the actual
products.
• The items displayed on the
TV screen may vary
depending on the area.
• The default setting is
underlined.
GB
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Step 3: Performing the Easy
Step 5: Enjoying Surround
Selecting the Effect to Suit
the Source .......................................45
Selecting the Audio Format, Multilingual
Tracks, or Channel..........................45
Using the Radio Data System
(RDS)..............................................48
Using the Control for HDMI Function for
“BRAVIA” Sync ............................49
Deactivating the Buttons on the Main
Unit.................................................51
Controlling Your TV or Other
Remote............................................52
Further Settings for the Wireless
System ............................................55
GB
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Unpacking
BDV-L800/BDV-L800M
• Main unit (1)
• Dock for iPod/iPhone
(TDM-iP30) (1)
• Speaker stands (2)
• Screws (silver) (2)
• Video cord for Dock for
iPod/iPhone (1)
• Front speakers (2)
• Wall mounting bracket A (1)
• USB cable (1)
• Stand cover (1)
• Wall mounting bracket B (1)
• Subwoofer (1)
• Operating Instructions
(Australian models only)
• Quick Setup Guide
• Speaker Installation Guide
• Main Unit Installation Guide
• Software License
• Wireless transceivers
(EZW-RT50) (2)
• FM wire antenna (aerial) (1)
Information
• AC adapter (1)
or
• Wireless Product
Compliance Information
• Warranty
• Reference Guide (European
models only)
• Remote commander
(remote) (1)
• AC power cord (mains lead)
(1)
• R6 (size AA) batteries (2)
GB
7
Download from Www.Somanuals.com. All Manuals Search And Download.
BDV-L600
• Main unit (1)
• Remote commander
(remote) (1)
• Wireless transceivers
(EZW-RT50) (2)
• R6 (size AA) batteries (2)
• AC adapter (1)
• Front speakers (2)
• Dock for iPod/iPhone
(TDM-iP30) (1)
• AC power cord (mains lead)
(1)
• Subwoofer (1)
• Video cord for Dock for
iPod/iPhone (1)
• Operating Instructions
(Australian models only)
• Quick Setup Guide
• Speaker Installation Guide
• Main Unit Installation Guide
• Software License
• USB cable (1)
• Stand cover (1)
Information
• FM wire antenna (aerial) (1)
• Wireless Product Compliance
Information
or
• Warranty
• Reference Guide (European
models only)
GB
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing the remote
Insert two R6 (size AA) batteries (supplied) by matching the 3 and # ends on the batteries to the
markings inside the compartment.
GB
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Index to Parts and Controls
For more information, refer to the pages indicated in parentheses.
Main unit
VOLUME
FUNCTION
A Ventilation openings
D Remote sensor
E Front panel display
C Soft-touch buttons/indicators
N (play)
About soft-touch buttons/
indicators
These buttons function when the soft-touch
Starts or re-starts playback (resume play).
Plays a slideshow when a disc containing
JPEG image files is inserted.
button indicators are lit.
x (stop)
You can turn on/off the indicators by setting
[Illumination/Display] to [Simple/Off], the
indicators turn off. In this case, touch any soft-
touch button. When the indicators light up,
touch the desired button.
Stops playback and remembers the stop
point (resume point).
The resume point for a title/track is the last
point you played or the last photo for a
photo folder.
VOLUME +/–
Adjusts the system’s volume.
• These buttons work when you touch them lightly. Do
not press on them with excessive force.
FUNCTION
Selects the playback source.
Z (eject)
Ejects the disc.
GB
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear panel
Side view (without
the panel cover)
A
(USB) port (left) (page 37)
H
(USB) port (rear) (page 37)
Used for connecting a USB device.
Used for connecting a USB device.
I TV DIGITAL IN (OPTICAL) jack (page
B "/1 (on/standby)
Turns on the main unit, or sets it to standby
mode.
J ANTENNA FM 75 Ω COAXIAL jack
K Wireless transceiver (EZW-RT50/EZW-
RT20) slot (page 25)
EZW-RT50 is supplied with the system.
GB
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Front panel display
About the indications in the front panel display
A Displays the system’s playing status.
F Lights up when muting is on.
B Lights up when repeat play is
G Displays the system’s status, such as
activated.
radio frequency, etc.
C Lights up when stereo sound is
H Lights up when outputting 720p/1080i/
1080p video signals from the HDMI
OUT jack.
received. (Radio only)
D Lights up when the system is playing
via the PARTY STREAMING function.
E Lights up when the HDMI OUT jack is
correctly connected to an HDCP (High-
bandwidth Digital Content Protection)-
compliant device with HDMI or DVI
(Digital Visual Interface) input.
GB
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Subwoofer
Front panel
Rear panel
A LINK/STANDBY indicator
B SPEAKERS jacks
You can check the status of wireless
transmission between the main unit and
subwoofer.
C Ventilation openings
D "/1 (Power) button
Turns the subwoofer on/off.
Indicator
Status
Turns green.
The system is turned on,
wireless transmission is
activated and sound signals are
being received.
Starts the Secure Link function.
F Wireless transceiver (EZW-RT50/EZW-
RT20) slot (page 25)
EZW-RT50 is supplied with the system.
Turns orange. The system is turned on,
wireless transmission is
activated with the Secure Link
function, and sound signals are
being received.
Flashes green The wireless transceiver is not
quickly.
inserted correctly into the
wireless transceiver slot.
Flashes green Wireless transmission is
or orange
slowly.
deactivated.
Turns red.
The subwoofer is in standby
mode while the system is in
standby mode or wireless
transmission is deactivated.
Turns off.
The subwoofer is turned off.
Flashes red.
The subwoofer’s protection is
active.
GB
13
Download from Www.Somanuals.com. All Manuals Search And Download.
A Z (eject)
Ejects the disc.
Remote control
SPEAKERS TVyAUDIO
The buttons for system operation only are
described below. See “Controlling Your TV or
(page 52) for the buttons for operation of the
connected components.
Selects whether TV sound is output from
the system’s speakers or the TV’s
speaker(s). This function works only when
you set [Control for HDMI] to [On]
Turns on the TV or other component, or sets
the TV or other components to standby
mode.
SPEAKERS
AV
TV AUDIO
1
BRAVIA Sync
BD
TV
1
4
7
2
5
8
0
3
6
Turns on the system or sets it to standby
mode.
9
2
3
4
STB
9
ENTER
Enters the title/chapter numbers, preset
station number, etc.
TOP MENU
POP UP/ MENU
ENTER
Enters the selected item.
TOOLS
RETURN
OPTIONS
C Color buttons (red/green/yellow/blue)
Short cut keys for selecting items on some
BD menus (can also be used for Java
interactive operations on BDs).
MENU
FUNCTION
SOUND MODE
5
6
HOME
PRESET
TUNING
PRESET
TUNING
D TOP MENU
Opens or closes the BD’s or DVD’s Top
Menu.
8
PROG
DISPLAY
SLEEP
POP UP/MENU
7
Opens or closes the BD-ROM’s Pop-up
Menu, or the DVD’s menu.
• Number 5,
, PROG +, and N buttons
Displays the options menu on the TV screen
or in the front panel display. (The location
differs based on the selected function.)
have a tactile dot. Use the tactile dot as a
reference when operating the remote.
• Names of buttons that work after pressing the
TV or STB operation mode buttons are
indicated with a yellow or green label.
RETURN
Returns to the previous display.
C/X/x/c
Moves the highlight to a displayed item.
(enter)
Enters the selected item.
GB
14
Download from Www.Somanuals.com. All Manuals Search And Download.
G
(muting)
Selects the playback source.
Turns off the sound temporarily.
Enters or exits the system’s home menu.
Selects the audio format/track.
SOUND MODE (page 45)
Selects the sound mode.
Adjusts the volume.
F Playback operation buttons
Displays playback and web browsing
information on the TV screen.
./> (previous/next)
Skip to the previous/next chapter, track, or
file.
Displays the preset radio station, frequency,
etc., in the front panel display.
Displays the stream information in the front
panel display when the function is set to
other than “BD/DVD.” When the system is
set to the “HDMI1,” “HDMI2,” or “TV”
function, the stream information appears
only when a digital signal is input.
The stream information may not appear
depending on the stream or item being
decoded.
(replay/advance)
Briefly replay the current scenes for 10
seconds./Briefly fast forwards the current
scenes for 15 seconds.
m/M (fast/slow/freeze frame)
Fast reverse/fast forward the disc during
playback. Each time you press the button,
the search speed changes.
Activates slow-motion play when pressed
for more than one second in pause mode.
Plays one frame at a time when pressed in
pause mode.
Sets the sleep timer.
H
(subtitle) (page 63)
Selects the subtitle language when
multilingual subtitles are recorded on a BD-
ROM/DVD VIDEO.
Slow-motion and single-frame playback are
not available for Blu-ray 3D Discs.
N (play)
Changes the component to be operated on
the remote.
Starts or re-starts playback (resume play).
the system is on and set to the “BD/DVD”
function.
BD: You can operate this Blu-ray Disc/
DVD Home Theatre System.
X (pause)
Pauses or re-starts playback.
TV: You can operate a TV.
STB: You can operate a cable box, digital
satellite receiver, digital video receiver, etc.
x (stop)
Stops playback and remembers the stop
point (resume point). The resume point for
a title/track is the last point you played or
the last photo for a photo folder.
(favorites)
Displays the Internet contents added to the
Favorites List. You can save 18 favorite
Internet contents.
Radio operation buttons
PRESET +/–
TUNING +/–
GB
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Step 1: Installing the System
You can select from one of three positions for installing the main unit: in a vertical position, in a
horizontal position, or on a wall. For details, see “Selecting the installation position of the main unit”
You can also install the front speakers on a wall. For details, refer to the supplied “Speaker Installation
Guide.”
How to position the system
Install the system by referring to the illustration below.
A Front speaker (L (left))
B Front speaker (R (right))
C Subwoofer
D Main unit
• Use caution when placing the speakers and/or speaker stands attached to the speakers on a specially treated (waxed,
oiled, polished, etc.) floor, as staining or discoloration may result.
• Leave a space for inserting/ejecting the disc (approximately 15 cm) to the right (disc slot) side of the main unit when
placing an object nearby.
Approximately 15 cm
• Do not lean or hang on a speaker, as it may fall down.
• Image distortion on the TV screen may occur depending on the location of the subwoofer. In this case, place the
subwoofer away from the TV.
• Place both front speakers the same distance apart from the listening position (A).
• The front speakers should be placed at least 0.6 m apart.
GB
16
Download from Www.Somanuals.com. All Manuals Search And Download.
• Place the front speakers forward from the TV. Make sure there are no obstacles in front of the speakers.
• Both front speakers should be pointed straight forward. Do not place the speakers at an angle.
Note on handling the subwoofer
Do not hold the subwoofer by the middle opening when lifting it. The speaker driver may be damaged.
When lifting the subwoofer, hold it from the bottom.
Opening
• It is recommended to place the subwoofer on a hard floor.
• You can place the subwoofer to the left or right of the main unit, facing the listening position.
GB
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2: Connecting the System
For connecting the system, read the information on the following pages.
Do not connect the AC power cords (mains leads) of the main unit and subwoofer to a wall outlet
(mains) until all the other connections are made.
• When you connect another component with a volume control, turn down the volume of the other components to a
level where sound is not distorted.
Connecting the speakers to the subwoofer
Connect the speaker cords to match the color of the SPEAKERS jacks of the subwoofer.
When connecting to the subwoofer, insert the connector until it clicks.
Rear of the
front speaker
Rear of the
front speaker
Rear panel of the subwoofer
White
Red
(Front left
(Front right
speaker (R))
speaker (L))
Removing the panel cover of the main unit
Before connecting the cables, remove the panel cover from the main unit.
Press the panel cover at (A) gently,
then slide it out to the side.
GB
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the TV
Connect the system to your TV to display the image of the system on your TV, and listen to TV sound
via the system’s speakers.
Depending on the jacks and functions on your TV, select the connection method.
• When your TV has an HDMI jack that is marked “ARC*”: Connection A
• When your TV has an HDMI jack: Connections A and C
• When your TV does not have HDMI jacks: Connections B and C
Video connections
Audio connection
A
B
C
High Speed
HDMI cable
(not supplied)
Digital optical cord
(not supplied)
Video cord
(not supplied)
Image quality
Rear panel of the main unit
Yellow
Yellow
To the
video input
jack of the
TV.
**
To the
HDMI IN
jack of the
TV.
To the
DIGITAL
OUT
(OPTICAL)
jack of the
TV.
Signal flow
: Video signal
: Audio signal
**Available only when your TV is compatible with the Audio Return Channel function.
GB
19
Download from Www.Somanuals.com. All Manuals Search And Download.
A HDMI cable connection
If your TV has an HDMI jack, connect to the TV with a High Speed HDMI cable. This will provide
better image quality compared to other types of connections.
When connecting with a High Speed HDMI cable, you need to select the type of output signal when
About Audio Return Channel
If your TV is compatible with the Audio Return Channel function, a High Speed HDMI cable
connection also sends a digital audio signal from the TV. You do not need to make a separate audio
connection for listening to TV sound. For setting the Audio Return Channel function, see [Audio
B Video cord connection
If your TV does not have an HDMI jack, make this connection.
C Digital optical cord connection
This connection sends an audio signal to the system from the TV. To listen to TV sound via the system,
perform this connection. With this connection, the system receives a Dolby Digital multiplex broadcast
signal and you can enjoy multiplex broadcast sound.
GB
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the other components with an HDMI (OUT) jack
You can connect a component that has an HDMI (OUT) jack such as a set-top box/digital satellite
®
receiver or PLAYSTATION 3, etc., with a High Speed HDMI cable. A High Speed HDMI cable
connection can send both video and audio signals. By connecting the system and the component using
a High Speed HDMI cable, you can enjoy high-quality digital picture and sound via the HDMI IN 1 or
HDMI IN 2 jack.
Rear panel of the main unit
High Speed HDMI cable (not supplied)
To the HDMI OUT jack of
the set-top box/digital
satellite receiver or
PLAYSTATION®3, etc.
• Video signals from the HDMI IN 1/2 jacks are sent to the HDMI OUT jack only when the “HDMI1” or “HDMI2”
function is selected.
• To send an audio signal from the HDMI IN 1/2 jacks to the HDMI OUT jack, you may need to change the audio
• You can change the audio input of a component that is connected to the HDMI IN 1 jack to the TV DIGITAL IN
(OPTICAL) jack. For details, see [HDMI1 Audio Input mode] in [HDMI Settings] (page 65). (European models
only.)
GB
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the antenna (aerial)
Rear panel of the main unit
FM wire antenna (aerial)
(supplied)
or
• Be sure to fully extend the FM wire antenna (aerial).
• After connecting the FM wire antenna (aerial), keep it as horizontal as possible.
• If you have poor FM reception, use a 75-ohm coaxial cable (not supplied) to connect the main unit to an outdoor
FM antenna (aerial).
GB
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to the network
• To connect the system to your network, you need to make network settings that suit your usage environment and
For BDV-L800/BDV-L800M
Select the method based on your LAN (Local Area Network) environment.
• If you use a wireless LAN
The system has built-in Wi-Fi, and you can connect the system to the network by making the network
settings.
• If you use other than a wireless LAN
Connect to the network by making a LAN cable connection as follows.
Rear panel of the main unit
Internet
ADSL modem/
cable modem
Broadband router
LAN cable
(not supplied)
• The placement distance between the main unit and your wireless LAN router differs based on your usage
environment. If the system cannot connect to the network or the network connection is unstable, place the main unit
and the wireless LAN router closer to each other. When you cannot place the main unit and the wireless LAN router
closer to each other, use the optional USB Wireless LAN Adapter (Sony UWA-BR100* only).
• To connect to a wireless LAN using a 5 GHz frequency band, you need the optional USB Wireless LAN Adapter
(Sony UWA-BR100* only).
* As of March 2011. The USB Wireless LAN Adapter may not be available in some regions/countries.
• You can also get information for network settings from the following Sony support page:
For customers in Europe:
For customers in other countries/regions:
GB
23
Download from Www.Somanuals.com. All Manuals Search And Download.
For BDV-L600
Select the method based on your LAN (Local Area Network) environment.
Rear panel of the main unit
Internet
Broadband
router
ADSL modem/
cable modem
USB Wireless LAN
Adapter
LAN cable
(not supplied)
(not supplied)
1 Wired Setup
Use a LAN cable to connect to the LAN(100) terminal on the main unit.
2 USB Wireless Setup
Use a wireless LAN via the USB Wireless LAN Adapter (Sony UWA-BR100* only).
The USB Wireless LAN Adapter may not be available in some regions/countries.
* As of March 2011.
Turn the main unit off before connecting the extension cable or inserting the USB Wireless LAN
Adapter. After inserting the USB Wireless LAN Adapter to the base and connecting the extension cable
to the
• The placement distance between the USB Wireless LAN Adapter and your wireless LAN router differs based on
your usage environment. If the system cannot connect to the network or the network connection is unstable, move
the USB Wireless LAN Adapter to a different position or place the USB Wireless LAN Adapter and the wireless
LAN router closer to each other.
• You can also get information for network settings from the following Sony support page:
For customers in Europe:
For customers in other countries/regions:
GB
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting the wireless transceivers
The main unit transmits sound to the subwoofer that is connected to the front speakers. To activate
wireless transmission, perform the following Steps.
1
Insert a wireless transceiver into the main unit by matching the markings on the rear
panel.
Rear panel of the main unit
Wireless transceiver
2
Insert a wireless transceiver into the subwoofer.
Rear panel of the subwoofer
Wireless transceiver
GB
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the AC power cord (mains lead) to the main unit
Do not plug the AC power cord (mains lead) for the main unit into a wall outlet (mains) until you have
made all other connections.
1
Connect the AC power cord (mains lead) to the AC adapter.
AC adapter (supplied)
AC power cord (mains lead) (supplied)
2
Plug the connector of the AC adapter into the DC IN 14V connector on the rear of the
main unit.
To unplug the AC adapter cord
Lift (A) of the connector of the AC adapter out gently to remove it from the gap on the main unit (1),
turn the connector counterclockwise by 90 degrees (2), and then pull it out from the main unit (3).
• Do not pull by the cord when you unplug the AC adapter cord.
GB
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the installation position of the main unit
You can select from one of three positions for installing the main unit: in a vertical position, in a
horizontal position, or on a wall.
To install the main unit in a vertical position
To install the main unit in a horizontal position
Refer to the supplied “Main Unit Installation Guide.”
To install the main unit on a wall
Refer to the supplied “Main Unit Installation Guide.”
Contact an installer to install the main unit on a wall.
• To install the main unit on a wall, you need the wall mounting brackets A and B. These are not supplied with BDV-
L600, so purchase the brackets (WS-L100) if necessary.
GB
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Attaching the covers
After you have made all the connections, organize the cables and attach the panel cover and the stand
cover by following the Steps below.
1
Place the main unit on its face.
• Make sure to place the main unit on a soft thick cloth to prevent damaging the main unit.
2
Bring together the cables (except the FM wire antenna (aerial)), guide them through the
slot at the right of the main unit, behind the clamp (A), and through the slot at the
bottom of the main unit.
Thread the FM wire antenna (aerial) through the small indentation at the rear of the main
unit.
FM wire antenna (aerial)
3
Thread the AC power cord (mains lead) through the gap on the main unit by securing it
behind the tabs, guide it through the slot at the left of the main unit, behind the clamp
(B), and through the slot at the bottom of the main unit.
Tabs
GB
28
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Attach the panel cover to the rear of the main unit.
Put the left edge of the lower part of the panel cover on (C), align the bottom projection of the
panel cover with (D), and then slide it inward until it clicks into place.
FM wire antenna (aerial)
• Be sure to fully extend the FM wire antenna (aerial).
• After attaching the panel cover, keep the FM wire antenna (aerial) as horizontal as possible.
• If a USB device (such as a USB memory) that has a long, thin body to the side panel, use the
on the left side of the main unit.
(USB) port
5
Attach the stand cover to the rear of the main unit.
Align both edges of lower part of the stand cover with the guides on the stand (E), and then slide
the stand cover down gently.
To remove the stand cover
Place the main unit on its face.
Press the catches on the stand down and slide the stand cover in the direction of the arrow in the
illustration below.
GB
29
Download from Www.Somanuals.com. All Manuals Search And Download.
To open the hatch of the panel cover
To arrange the cables to the left side of the main unit, open the hatch of the panel cover before you
attach the panel cover. Be sure not to lose the hatch.
Hatch
To open the hatch, remove the panel cover, hold the hatch, and then pull it up and outward.
To close the hatch, align the projection of the hatch with the projection opening on the panel cover, and
then gently push in and down on the hatch until it clicks.
To close the hatch
To open the hatch
GB
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning on the system
After you have made all connections in “Step 2: Connecting the System” (page 18), turn the system on.
1
Press "/1 to turn the main unit on.
"/1
2
Connect the AC power cord (mains lead) of the subwoofer into the wall outlet (mains).
After the subwoofer turns on, the LINK/STANDBY indicator turns green and the wireless
transmission is activated.
LINK/STANDBY indicator
About the standby mode
The subwoofer enters standby mode automatically (the LINK/STANDBY indicator turns red) when the
main unit is in standby mode or wireless transmission is deactivated.
The subwoofer turns on automatically (the LINK/STANDBY indicator turns green) when the main unit
is turned on and wireless transmission is activated.
To specify the wireless connection
If you use multiple wireless products or your neighbors use wireless products, interference may occur.
To prevent this, you can specify the wireless connection to link the main unit to the subwoofer (Secure
GB
31
Download from Www.Somanuals.com. All Manuals Search And Download.
To recall the Easy Setup Display
Step 3: Performing the
Easy Setup
Follow the Steps below to make the basic
adjustments for using the system.
Displayed items vary depending on the country
model.
1
Press HOME.
The home menu appears on the TV screen.
2
3
Press C/c to select
Press X/x to select [Easy Setup], then
press
[Setup].
.
4
Press C/c to select [Start], then press
.
The Easy Setup Display appears.
"/1
1
4
7
2
5
8
0
3
6
9
C/X/x/c,
HOME
1
2
3
Turn on the TV.
Press [/1.
Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
The Easy Setup Display for OSD language
selection appears.
4
Perform the [Easy Setup]. Follow the
on-screen instructions to make the
basic settings using C/X/x/c and
.
Depending on the connection method
(page 19), perform the following setting.
• HDMI cable connection: Follow the
instructions that are displayed on the TV
screen.
• Video cord connection: Select [16:9] or
[4:3] so that the picture is displayed
correctly.
GB
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4: Selecting the
Source
You can select the playback source.
1
4
7
2
5
8
0
3
6
9
FUNCTION
Press FUNCTION repeatedly until the
desired function appears in the front panel
display.
Each time you press FUNCTION, the function
changes as follows.
“BD/DVD” t “FM” t “HDMI1” t
“HDMI2” t “TV” t “BD/DVD” t …
Function
Source
“BD/DVD”
Disc, USB device, iPod/iPhone, or
network device to be played by the
system
“FM”
FM radio (page 47)
“HDMI1”/
“HDMI2”
Component that is connected to
the HDMI IN 1 or HDMI IN 2 jack
on the rear panel (page 21)
“TV”
Component (TV, etc.) that is
connected to the TV DIGITAL IN
(OPTICAL) jack on the rear panel,
or a TV compatible with the Audio
Return Channel function that is
connected to the HDMI OUT jack
on the rear panel (page 19)
GB
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5: Enjoying Surround Sound
After performing the previous Steps and starting playback, you can easily enjoy surround sound. You
can also select pre-programmed surround settings that are tailored to different kinds of sound sources.
They bring the exciting and powerful sound of movie theaters into your home.
1
4
7
2
5
8
0
3
6
9
X/x/c,
OPTIONS
Selecting surround settings based on your listening preference
The setting method differs depending on the function.
When playing via the “BD/DVD”* or “FM” function
1
Press OPTIONS.
The option menu appears on the TV screen.
2
3
Press X/x to select [Surround Setting], then press
.
Press X/x repeatedly until the surround setting you want appears on the TV screen.
See the table below for surround sound setting descriptions.
4
Press
.
The setting is made.
* Surround sound settings do not apply to Internet content.
When playing via the “HDMI1,” “HDMI2,” or “TV” function
1
Press OPTIONS.
The option menu appears in the front panel display.
2
3
Press X/x repeatedly until “SUR. SET” appears in the front panel display, then press
or c.
Press X/x repeatedly until the surround setting you want appears in the front panel
display.
See the table below for surround sound setting descriptions.
4
5
Press
.
The setting is made.
Press OPTIONS.
The option menu in the front panel display turns off.
GB
34
Download from Www.Somanuals.com. All Manuals Search And Download.
About speaker output
The default setting is [Auto] (“AUTO”).
Surround setting
Effect
[Auto]
“AUTO”
The system outputs the sound with suitable effect automatically depending on the source.
• 2 channel source: Outputs 2 channel sound as it is.
• Multi-channel source: Simulates 7.1 or 5.1 surround sound with two front speakers and a
subwoofer.
[2ch Stereo]
“2CH ST.”
The system outputs 2 channel sound regardless of sound format or number of channels.
Multi-channel surround formats are downmixed to 2 channels.
• Depending on the input stream, the surround settings may not be effective.
• When you play a Super Audio CD, surround settings are not activated.
GB
35
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Connect the USB device to the
(USB) port on the rear of the main unit.
Playback
For using BONUSVIEW only, skip to Step
3.
Playing a Disc
For local storage, use a 1 GB or larger USB
memory.
For playable discs, see “Playable Discs”
Rear panel
1
2
Switch the input selector on your TV so
that the signal from the system
appears on your TV screen.
Load a disc.
USB
memory
Labeled side facing the front
2
3
Prepare for BD-LIVE (BD-LIVE only).
• Connect the system to a network
• Set [BD Internet Connection] to [Allow]
appears on the home menu and playback
starts.
Insert a BD-ROM with BONUSVIEW/
BD-LIVE.
If playback does not start automatically,
select
in the
[Video],
[Music], or
.
The operation method differs depending on
the disc. Refer to the operating instructions
of the disc.
[Photo] category, and press
• Do not load a disc while the main unit is in standby
mode.
• To delete data in the USB memory, select [Erase BD
Data] in [Video], and press . All data stored in
the buda folder will be deleted.
• Do not load a disc while the illumination LED is
flashing just after you turn on the main unit.
• Insert the disc straight into the disc slot.
Enjoying Blu-ray 3D
Enjoying BONUSVIEW/BD-LIVE
You can enjoy Blu-ray 3D Discs with the 3D
logo*.
Some BD-ROMs with “BD-LIVE Logo*” have
bonus content and other data that can be
downloaded for enjoyment.
*
*
1
Prepare for Blu-ray 3D Disc playback.
• Connect the system to your 3D-
compatible TV using a High Speed HDMI
cable (not supplied).
• Set [3D Output Setting] and [TV Screen
Size Setting for 3D] in [Screen Settings]
GB
36
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Insert a Blu-ray 3D Disc.
The operation method differs depending on
the disc. Refer to the operating instructions
supplied with the disc.
Playing from a USB
Device
You can play video/music/photo files on the
connected USB device.
For playable types of files, see “Playable Types
• Refer also to the operating instructions of your 3D-
compatible TV.
Displaying the play information
1
Connect the USB device to the
(USB) port on the main unit.
You can check the playback information, etc.,
by pressing DISPLAY.
The displayed information differs depending on
the disc type and system status.
Refer to the operating instructions of the
USB device before connecting.
Rear panel/left side of the main unit
Example: when playing a BD-ROM
USB
device
2
Press HOME.
The home menu appears on the TV screen.
A
B
C
D
Output resolution/Video frequency
Title number or name
3
4
Press C/c to select
[Video],
[Music], or
[Photo].
Press X/x to select
[USB device
The currently selected audio setting
(rear)] or
[USB device (left)], then
Available functions (
subtitle)
angle,
audio,
press
.
E
Playback information
• Do not remove the USB device during
operation. To avoid data corruption or damage
to the USB device, turn the system off when
connecting or removing the USB device.
Displays play mode, playing status bar, disc
type, video codec, bit rate, repeat type, elapsed
time, total playing time
F
G
Chapter number
The currently selected angle
GB
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear panel Left side
or
Enjoying an iPod/iPhone
TV
You can enjoy the music/video/photo and
charge the battery of an iPod/iPhone via the
system.
VIDEO IN
Compatible iPod/iPhone models
The compatible iPod/iPhone models are as
follows. Update your iPod/iPhone with the latest
software before using with the system.
Dock for
iPod/iPhone
Made for iPod touch 4th generation, iPod touch
3rd generation, iPod touch 2nd generation, iPod
touch 1st generation, iPod nano 6th generation,
iPod nano 5th generation (video camera), iPod
nano 4th generation (video), iPod nano 3rd
generation (video), iPod nano 2nd generation
(aluminum), iPod nano 1st generation, iPod 5th
generation (video), iPod classic, iPhone 4,
iPhone 3GS, iPhone 3G, iPhone
USB cable (supplied)
USB
DE
Video cord (supplied)
To enjoy an iPod/iPhone via the
system
2
Press HOME.
The home menu appears on the TV screen.
Press C/c to select [Video],
[Music], or [Photo].
Press X/x to select [iPod (rear)] or
[iPod (left)], then press
1
Connect the Dock for iPod/iPhone
(supplied) to the rear or left
port on the main unit, then place the
iPod/iPhone onto the Dock for iPod/
iPhone.
(USB)
3
4
.
When you play a video/photo file, connect
the video out jack of the Dock for iPod/
iPhone to the video input jack of your TV
with a video cord (supplied) before placing
the iPod/iPhone onto the Dock for iPod/
iPhone.
x If you selected [Video] or [Music] in
Step 3
The video/music files are listed on the TV
screen. Go to the next Step.
x If you selected [Photo] in Step 3
[Please change the TV input to the video
input...] appears on the TV screen. Switch
the input selector on your TV so that the
signal from the iPod/iPhone appears on
your TV screen. Then, start the slideshow
by operating the iPod/iPhone directly.
5
Press C/X/x/c and
that you want to play.
to select the file
The sound from the iPod/iPhone is played
on the system.
When you play a video file, switch the input
selector on your TV so that the signal from
the iPod/iPhone appears on your TV screen.
GB
38
Download from Www.Somanuals.com. All Manuals Search And Download.
You can operate the iPod/iPhone using the
buttons on the remote.
• The iPod/iPhone is charged when connected to the
system while the system is turned on.
For operation details of the iPod/iPhone,
also refer to the operating instructions of the
iPod/iPhone.
• When [Auto Standby] is set to [On], the system may
turn off automatically while you are using an iPod/
iPhone.
• You cannot transfer songs onto the iPod/iPhone from
this system.
• To change a system setting, such as the surround
setting, while viewing images from your iPod/iPhone
on your TV, select the input on your TV for this
system before operating the system.
• Sony cannot accept responsibility in the event that
data recorded to iPod/iPhone is lost or damaged when
using an iPod/iPhone connected to this main unit.
• This product has been designed specifically to work
with iPod/iPhone and has been certified to meet
Apple performance standards.
To operate the iPod/iPhone using
the remote
You can operate the iPod/iPhone using the
buttons on the remote. The following table
shows an example of buttons that can be used.
(Depending on the iPod/iPhone model,
operation may be different.)
• Do not remove the iPod/iPhone during operation. To
avoid data corruption or damage to the iPod/iPhone,
turn the system off when connecting or removing the
iPod/iPhone.
• The system only recognizes iPods/iPhones that have
previously been connected to the system.
• The System Audio Control function does not work
while playing video/photo files via the iPod/iPhone.
• When you connect an iPod that is not compatible with
the video output function and select [iPod (rear)]
or [iPod (left)] in [Video] or [Photo], an alert
message appears on the TV screen.
For
[Video]/
[Music]
Press
Operation
N
Starts play.
X
Pauses play.
x
Stops play.
m or M
. or >
Fast reverses or forwards.
• The system can recognize up to 3,000 files (including
folders).
Goes to the previous/next file or
chapter (if any).
For
[Photo]
Press
Operation
N, X
Starts/pauses play.
When you press and hold either of
these buttons for several seconds,
the connected iPod/iPhone enters
sleep mode.
x
Pauses play.
m or M
. or >
Fast reverses or forwards.
Goes to the previous/next file.
When you press and hold either of
these buttons, the connected iPod/
iPhone fast reverses or fast forwards.
DISPLAY
Turns the backlight on (or extends it
for 30 seconds).
OPTIONS, C Returns to previous display/folder
hierarchy.
X/x
, c
Selects the previous/next item.
Enters the selected item.
GB
39
Download from Www.Somanuals.com. All Manuals Search And Download.
D
E
F
Network transmission speed
The next video file name
Playing via a Network
The currently selected video file name
Streaming BRAVIA Internet
Video
Playing files on a Home
Network (DLNA)
BRAVIA Internet Video serves as a gateway
delivering selected Internet content and a variety
of on-demand entertainment straight to your
main unit.
You can play video/music/photo files on other
DLNA-certified components by connecting
them to your home network.
This main unit can be used as a player and
renderer.
• Some Internet content requires registration via a PC
before it can be played.
• Server: Stores and sends files
• Player: Receives and plays files from the
server
1
Prepare for BRAVIA Internet Video.
• Renderer: Receives and plays files from the
server, and can be operated by another
component (controller)
2
3
Press C/c to select
[Video],
[Music], or [Photo].
• Controller: Operates the renderer component
Press X/x to select an Internet content
provider icon, then press
.
Server
If the Internet content list has not been
retrieved, it will be represented by an
unacquired icon or a new icon.
To use the control panel
The control panel appears when the video file
starts playing. The displayed items may differ
depending on Internet content providers.
To display again, press DISPLAY.
Player
Player
(This system)
Prepare for using the DLNA function.
• Prepare other DLNA-certified components.
For details, see the operating instructions of
the components.
A
B
Control display
Press C/X/x/c or
for playback operations.
Playing status bar
Status bar, cursor indicating the current
position, playing time, duration of the video
file
C Network condition indicator
Indicates signal strength for a wireless
connection.
Indicates a wired connection.
GB
40
Download from Www.Somanuals.com. All Manuals Search And Download.
To play files stored on a DLNA
server via the system (DLNA
Player)
Playing the same music in
different rooms (PARTY
STREAMING)
Select the DLNA server icon from
[Video],
[Music], or
[Photo] in the home menu,
then select the file that you want to play.
You can play the same music at the same time
across all Sony components which are
Server
compatible with the PARTY STREAMING
function and connected to your home network.
There are two kinds of PARTY STREAMING-
compatible components.
• PARTY host: Sends and plays files
• PARTY guest: Receives and plays files
Player
(This system)
This main unit can be used as a PARTY host or
PARTY guest.
PARTY host
(This system)
To play remote files by operating
the system (Renderer) via a DLNA
controller
You can operate the system with a DLNA-
certified controller, such as iPhone, when
playing files stored on a DLNA server.
Server
PARTY guest
PARTY guest
Prepare for PARTY STREAMING.
• Connect components which are compatible
with the PARTY STREAMING function.
Renderer
(This system)
Controller
Control this system using a DLNA controller.
For details of operation, see the operating
instructions of the DLNA controller.
To use the system as PARTY host
Select a track in
[Music], then select [Start
Party] from the options menu to start a PARTY.
To close the PARTY, press HOME.
• Do not operate the system with the supplied remote
and a DLNA controller at the same time.
To use the system as PARTY
guest
• For details about the DLNA controller, refer to the
operating instructions of the DLNA controller.
Select
[Party] in
[Music], then select the
PARTY host device icon.
To leave the PARTY, press OPTIONS, then
select [Leave Party].
To close the PARTY, press OPTIONS, then
select [Close Party].
• The system is compatible with the “Play To” function
of Windows Media Player 12 that comes standard
with Windows 7.
®
GB
41
Download from Www.Somanuals.com. All Manuals Search And Download.
To search for further related
information
Select an item in the lists, and then select the
• The sale and product lineup of products that are
compatible with the PARTY STREAMING function
differ depending on the area.
service for searching.
Searching for video/music
information
Available Options
Various settings and playback operations are
available by pressing OPTIONS. The available
items differ depending on the situation.
You can acquire content information using
Gracenote technology and search for related
information.
1
2
Connect the system to a network
Common options
Insert a disc or connect a USB device
with content about which you want to
search.
Items
Details
[Surround Setting]
Changes the surround setting
You can perform a video search from a BD-
ROM or DVD-ROM, and a music search
from a CD-DA (music CD) or USB device.
[Repeat Setting]
[3D Menu]
Sets repeat playback.
[3D Depth Adjustment]:
Adjusts the depth of 3D
images.
3
4
Press C/c to select
[Video] or
[Music].
[Favourites List]
[Play/Stop]
Displays the Favorites List.
Starts or stops playback.
Press X/x to select
[Video Search]
[Play from start]
Plays the item from the
beginning.
or
[Music Search].
The content information is displayed.
[Add to Favourites]
Adds an Internet content item
to the Favorites List.
[Remove from
Favourites]
Erases an Internet content
item from the Favorites List.
[Start Party]
Starts a party with the
selected source.
This item may not appear
depending on the source.
[Leave Party]
Leaves from a party which
the system is participating in.
The PARTY STREAMING
function continues among
other participating devices.
A
B
Content details
Displays a list of related information, such as
title, cast, track, or artist.
[Playback History]
[Close Party]
Closes a party which the
system is participating in. The
PARTY STREAMING
function ends for all other
participating devices.
Displays a list of previously played BD-ROM/
DVD-ROM/CD-DA (music CD) titles. Select
a title to acquire content information.
C
[Search History]
Displays a list of previous searches performed
via the [Video Search] or [Music Search]
function.
GB
42
Download from Www.Somanuals.com. All Manuals Search And Download.
[Video] only
[Music] only
Items
[A/V SYNC]
Details
Items
Details
Adjusts the gap between
picture and sound. For
details, see “Adjusting the
[Add Slideshow
BGM]
Registers music files in the
USB memory as slideshow
background music (BGM).
[Music Search]
Displays information on the
audio CD (CD-DA) based on
Gracenote technology.
[3D Output Setting] Sets whether or not to output
3D video automatically.
[Shuffle Setting]
Sets shuffle playback.
(iPod/iPhone only)
• 3D video from the HDMI IN
1 or HDMI IN 2 jack is
output regardless of this
setting.
[Photo] only
Items
Details
[Video Settings]
• [Picture Quality Mode]:
Selects the picture settings
for different lighting
environments.
[Slideshow]
Starts a slideshow.
Changes the slideshow speed.
[Slideshow Speed]
[Slideshow Effect]
Sets the effect when playing a
slideshow.
• [FNR]: Reduces the random
noise appearing in the
picture.
[Slideshow BGM]
• [Off]: Turns off the
function.
• [My Music from USB]: Sets
the music files registered in
[Add Slideshow BGM].
• [Play from Music CD]: Sets
the tracks on CD-DAs
(music CDs).
• [BNR]: Reduces the
mosaic-like block noise in
the picture.
• [MNR]: Reduces minor
noise around the picture
outlines (mosquito noise).
[Rotate Left]
Rotates the photo
counterclockwise by
90 degrees.
[Pause]
Pauses playback.
[Top Menu]
Displays the BD’s or DVD’s
Top Menu.
[Rotate Right]
[View Image]
Rotates the photo clockwise
by 90 degrees.
[Menu/Popup Menu] Displays the BD-ROM’s
Pop-up Menu or DVD’s
menu.
Displays the selected picture.
[Title Search]
Searches for a title on BD-
ROMs/DVD VIDEOs and
starts playback from the
beginning.
[Chapter Search]
[Angle]
Searches for a chapter and
starts playback from the
beginning.
Switches to other viewing
angles when multi-angles are
recorded on BD-ROMs/DVD
VIDEOs.
[IP Content Noise
Reduction]
Adjusts the video quality for
Internet content.
[Video Search]
Displays information on the
BD-ROM/DVD-ROM based
on Gracenote technology.
GB
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the delay between
the picture and sound
(A/V SYNC)
When the sound does not match the pictures on
the TV screen, you can adjust the delay between
the picture and sound.
The setting method differs depending on the
function.
• Depending on the input stream, A/V SYNC may not
be effective.
When playing via the “BD/DVD”
function
1
Press OPTIONS.
The option menu appears on the TV screen.
2
3
Press X/x to select [A/V SYNC], then
press
.
Press C/c to adjust the delay between
the picture and sound.
You can adjust from 0 ms to 300 ms in 25
ms increments.
4
Press
.
The setting is made.
When playing via the “HDMI1,”
“HDMI2,” or “TV” function
1
Press OPTIONS.
The option menu appears in the front panel
display.
2
3
Press X/x repeatedly until “A/V SYNC”
appears in the front panel display, then
press
or c.
Press X/x to adjust the delay between
the picture and sound.
You can adjust from 0 ms to 300 ms in 25
ms increments.
4
5
Press
.
The setting is made.
Press OPTIONS.
The option menu in the front panel display
turns off.
GB
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Audio
Format, Multilingual
Tracks, or Channel
When the system is playing a BD/DVD VIDEO
recorded in multiple audio formats (PCM,
Dolby Digital, MPEG audio, or DTS) or
multilingual tracks, you can change the audio
format or language.
Sound Adjustment
Selecting the Effect to
Suit the Source
You can select a suitable sound mode for movies
or music.
With a CD, you can select the sound from the
right or left channel and listen to the sound of the
selected channel through both the right and left
speakers.
1
4
7
2
5
8
0
3
6
9
SOUND
MODE
Press SOUND MODE repeatedly during
playback until the desired mode appears in
the front panel display.
• “AUTO”: The system selects “MOVIE” or
“MUSIC” automatically to produce the sound
effect depending on the disc or sound stream.
• “MOVIE”: The system provides the sound for
movies.
Press
repeatedly during playback to
select the desired audio signal.
The audio information appears on the TV
screen.
x BD/DVD VIDEO
Depending on the BD/DVD VIDEO, the choice
of language varies.
When 4 digits are displayed, they indicate a
language code. See “Language Code List”
(page 80) to confirm which language the code
represents. When the same language is
displayed two or more times, the BD/DVD
VIDEO is recorded in multiple audio formats.
• “MUSIC”: The system provides the sound for
music.
• “SPORTS”: The system adds reverberation for
sports programs.
• “GAME ROCK”: The system provides the
sound for music/rhythm games.
• Depending on the disc or source, when you select
“AUTO,” the beginning of the sound may be cut off
as the system selects the optimum mode
automatically. To avoid cutting the sound, select
other than “AUTO.”
x DVD-VR
The types of sound tracks recorded on a disc are
displayed.
• Depending on the input stream, the sound mode may
not be effective.
Example:
• [ Stereo]
• When you play a Super Audio CD, this function does
not work.
• [ Stereo (Audio1)]
• [ Stereo (Audio2)]
• [ Main]
• [ Sub]
• [ Main/Sub]
GB
45
Download from Www.Somanuals.com. All Manuals Search And Download.
• [ Stereo (Audio1)] and [ Stereo (Audio2)] do not
appear when only one audio stream is recorded on the
disc.
x CD
• [ Stereo]: The standard stereo sound.
• [ 1/L]: The sound of the left channel
(monaural).
• [ 2/R]: The sound of the right channel
(monaural).
• [ L+R]: The sound of both the left and right
channels output from each individual speaker.
Enjoying Multiplex
Broadcast Sound
(DUAL MONO)
You can enjoy multiplex broadcast sound when
the system receives or plays a Dolby Digital
multiplex broadcast signal.
• To receive the Dolby Digital signal, you need to
connect a TV or other component to the main unit
compatible with the Audio Return Channel function
via a High Speed HDMI cable.
Press
repeatedly until the desired
signal appears in the front panel display.
• “MAIN”: Sound of the main language will be
output.
• “SUB”: Sound of the sub language will be
output.
• “MAIN/SUB”: Mixed sound of both the main
and sub languages will be output.
GB
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual tuning
Press TUNING +/– repeatedly.
Tuner
3
Adjust the volume by pressing
2 +/–.
Listening to the Radio
You can enjoy radio sound with the system’s
If an FM program is noisy
If an FM program is noisy, you can select
monaural reception. There will be no stereo
effect, but reception will improve.
speakers.
"/1
1
Press OPTIONS.
1
4
7
2
5
8
0
3
6
9
Number
buttons
The option menu appears on the TV screen.
2
3
Press X/x to select [FM Mode], then
press
.
C/X/x/c,
HOME
Press X/x to select [Monaural].
• [Stereo]: Stereo reception.
OPTIONS
PRESET +/–
FUNCTION
• [Monaural]: Monaural reception.
TUNING +/–
4
Press
.
x
The setting is made.
2 +/–
To turn off the radio
Current station
Current band and preset number
Press "/1.
FM
7
Presetting radio stations
You can preset up to 20 stations. Before tuning,
make sure to turn down the volume to minimum.
88.00 MHz
SONY FM
1
2
Press FUNCTION repeatedly until “FM”
appears in the front panel display.
Press and hold TUNING +/– until the
auto scanning starts.
Station name (European models
only)
Scanning stops when the system tunes in a
station.
1
2
Press FUNCTION repeatedly until “FM”
appears in the front panel display.
3
Press OPTIONS.
Select the radio station.
The option menu appears on the TV screen.
4
5
6
Press X/x to select [Preset Memory],
Automatic tuning
then press
Press X/x to select the preset number
you want, then press
.
Press and hold TUNING +/– until the auto
scanning starts.
.
[Auto Tuning] appears on the TV screen.
Scanning stops when the system tunes in a
station.
Repeat Steps 2 to 5 to store other
stations.
To stop the automatic tuning manually,
press TUNING +/– or x.
GB
47
Download from Www.Somanuals.com. All Manuals Search And Download.
* If an RDS broadcast is not received, the station
name may not appear in the front panel display.
To change the preset number
Select the desired preset number by pressing
PRESET +/–, then perform the procedure from
Step 3.
• RDS may not work properly if the station you are
tuned to is not transmitting the RDS signal properly,
or if the signal strength is weak.
• Not all FM stations provide RDS service, nor do they
provide the same type of services. If you are not
familiar with the RDS system, check with your local
radio stations for details on RDS services in your
area.
Selecting the preset station
1
Press FUNCTION repeatedly until “FM”
appears in the front panel display.
The last received station is tuned in.
2
Press PRESET +/– repeatedly to select
the preset station.
• While receiving an RDS broadcast, each time you
press DISPLAY, the display in the front panel display
changes as follows:
Station name t Frequency t Preset number t
Stream information t Station name t …
The preset number and frequency appear on
the TV screen and front panel display.
Each time you press the button, the system
tunes in one preset station.
• You can select the preset station number directly
by pressing the number buttons.
Using the Radio Data
System (RDS)
(European models only)
What is the Radio Data
System?
The Radio Data System (RDS) is a broadcasting
service that allows radio stations to send
additional information along with the regular
program signal. This tuner offers convenient
RDS features, such as station name display.
The station name appears on the TV screen as
well.
Receiving RDS broadcasts
Simply select a station from the FM band.
When you tune in a station that provides RDS
services, the station name* appears in the front
panel display.
GB
48
Download from Www.Somanuals.com. All Manuals Search And Download.
System Audio Control
You can simplify operation to enjoy sound from
the TV or other components.
Other Operations
You can use the System Audio Control function
as follows:
Using the Control for
HDMI Function for
“BRAVIA” Sync
This function is available on TVs with the
“BRAVIA” Sync function.
By connecting Sony components that are
compatible with the Control for HDMI function
via a High Speed HDMI cable, operation is
simplified.
• When the system is turned on, the sound of the
TV or other components can be output from
the speakers of the system.
• When sound from the TV or other components
is output via the speakers of the system, you
can change the speakers to which TV sound is
output by pressing
SPEAKERS TVyAUDIO.
• When sound from the TV or other components
is output via the speakers of the system, you
can adjust the volume and turn off the sound of
the system by operating the TV.
• Some functions can only be used if the connected TV
is compatible, and require prior setting via the TV.
Refer to the operating instructions of the TV.
• To use the System Audio Control function, you need
to make an audio connection between the system and
• While the TV is in PAP (picture and picture) mode,
or the system is playing video/photo files from the
iPod/iPhone, the System Audio Control function will
not work.
• To use the Position Control function, your TV must
have a sensor that can detect the listening position. In
this case, the sound level and/or picture quality of all
the components connected to the TV are also adjusted
according to the signal from your TV.
• Depending on the TV, when you adjust the main
unit’s volume, the volume level appears on the TV
screen. In this case, the volume level that appears on
the TV screen and the main unit’s front panel display
may differ.
Audio Return Channel
Using “BRAVIA” Sync
You can enjoy TV sound via the system by using
just one High Speed HDMI cable. For details of
Control for HDMI - Easy Setting
You can set the system’s [Control for HDMI]
function automatically by enabling the
corresponding setting on the TV.
Remote Easy Control
You can control the basic functions of the
system via the TV remote when the system’s
video output is displayed on the TV screen.
For details about the Control for HDMI
function, see “[HDMI Settings]” (page 65)
System Power Off
You can turn the system off in sync with the TV.
Language Follow
When you change the language for the on-screen
display of the TV, the system’s on-screen
display language is also changed after turning
the system off and on.
• The system does not turn off automatically while
playing music or when set to the “FM” function.
One-Touch Play
When you press N on the remote, the system
and your TV turn on, and your TV’s input is set
to the HDMI input to which the system is
connected.
GB
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Routing Control
x [Distance]
When you perform One-Touch Play on the
connected component, the system turns on and
sets the system’s function to “HDMI1” or
“HDMI2” (depending on the HDMI input jack
in use), and your TV’s input is automatically set
to the HDMI input to which the system is
connected.
When you move the speakers, be sure to set the
parameters of the distance (A) from the
listening position to the speakers.
You can set the parameters from 0.0 to 7.0
meters.
The speakers in the illustration correspond to the
following:
• Make sure that the component is connected to the
system via a High Speed HDMI cable, and the
Control for HDMI function of the connected
component is set to on.
1Front left speaker (L)
2Front right speaker (R)
3Subwoofer
3
Position Control
1
2
This system adjusts the sound level of the right
and left front speakers automatically if your TV
is compatible with the External Device Control
of Position Control function. In this case, other
components connected to the TV are also
adjusted. For details, refer to the operating
instructions of your TV.
A
[Front Left/Right] 3.0 m: Set the front speaker
distance.
[Subwoofer] 3.0 m: Set the subwoofer distance.
Setting the Speakers
[Speaker Settings]
• Depending on the input stream, [Distance] may not
be effective.
To obtain the best possible surround sound, set
connection of the speakers and their distance
from your listening position. Then use the test
tone to adjust the level and the balance of the
speakers to the same level.
x [Level]
You can adjust the sound level of the speakers.
You can set the parameters from –6.0 dB to +6.0
dB. Be sure to set [Test Tone] to [On] for easy
adjustment.
1
Press HOME.
The home menu appears on the TV screen.
2
3
Press C/c to select
Press X/x to select [Audio Settings],
then press
Press X/x to select [Speaker Settings],
then press
[Setup].
[Front Left/Right] 0.0 dB: Set the front speaker
level.
[Subwoofer] 0.0 dB: Set the subwoofer level.
.
4
x [Test Tone]
.
The speakers will emit a test tone to adjust
[Level].
The [Speaker Settings] display appears.
5
Press X/x to select the item, then press
.
[Off]: The test tone is not emitted from the
speakers.
Check the following settings.
[On]: The test tone is emitted from each speaker
in sequence while adjusting level. When you
select one of the [Speaker Settings] items, the
GB
50
Download from Www.Somanuals.com. All Manuals Search And Download.
test tone is emitted from each speaker in
sequence.
Adjust the sound level as follows.
Using the Sleep Timer
You can set the system to turn off at a preset
time, so you can fall asleep listening to music.
The time can be preset in intervals of 10
minutes.
1
2
Set [Test Tone] to [On].
Press X/x to select [Level], then press
.
3
4
Press X/x to select the desired speaker
Press SLEEP.
type, then press
.
Each time you press SLEEP, the minutes display
(the remaining time) in the front panel display
changes by 10 minutes.
Press C/c to select the left or right
speaker, then press X/x to adjust the
level.
When you set the sleep timer, the remaining
time appears every 5 minutes.
When the remaining time is less than 2 minutes,
“SLEEP” flashes in the front panel display.
5
6
7
Press
.
Repeat Steps 3 to 5.
Press RETURN.
The system returns to the previous display.
To check the remaining time
8
9
Press X/x to select [Test Tone], then
press
Press SLEEP once.
.
To change the remaining time
Press X/x to select [Off], then press
Press SLEEP repeatedly to select the desired
time.
.
• The test tone signals are not output from the HDMI
OUT jack.
Deactivating the Buttons
on the Main Unit
• To adjust the volume of all the speakers at one time,
press 2 +/–.
(Child Lock)
You can deactivate the buttons on the main unit
(except for "/1) for preventing misoperation,
such as child mischief (child lock function).
Press x on the main unit for more than 5
seconds.
“LOCKED” appears in the front panel display.
The child lock function is activated and the
buttons on the main unit are locked. (You can
operate the system by using the remote.)
To cancel, press x for more than 5 seconds so
that “UNLOCK” appears in the front panel
display.
• When you operate the buttons on the main unit while
the child lock function is on, “LOCKED” flashes in
the front panel display.
GB
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Button
Remote’s mode
TV
STB
Controlling Your TV or
Other Components with
the Supplied Remote
You can control your TV and other components
such as a cable box or digital satellite receiver
with the supplied remote. The remote is initially
set to control Sony components.
z
z
TOP MENU
(
)
z
a
z
z
z
z
z
a
z
z
z
a
POP UP/MENU
C/X/x/c,
RETURN
HOME (MENU)
OPTIONS
(TOOLS)
You can control non-Sony components by
changing the preset code of the remote. For
operation, see “Changing the preset code of the
z
a
SOUND MODE
(
)
z
z
z
z
z
z
z
a
a
a
a
a
a
z
./>
m/M
• When you replace the batteries of the remote, the
remote setting may be reset to the default (SONY)
setting.
N
X
x
Controlling your components
with the supplied remote
z
z
z
z
2 +/–
PROG +/–
(c/C)
1
Press the TV or STB operation mode
button that matches the component
you want to control.
z
z
DISPLAY
(
/
)
2
Press the appropriated buttons listed
in the following table.
• In TV or STB mode, if you press any of the buttons
above, the TV or STB operation mode button lights
up. (However, depending on the code setting, some
buttons may not work, and the TV or STB operation
mode button may not light up.)
• z: The button can be used with the
default setting of the remote.
• a: The button can be used when you
change the preset code of the remote.
• If you press other than the buttons above when the
remote is in TV or STB mode, the TV or STB
operation mode button does not light up.
Button
Remote’s mode
TV
STB
z
• Depending on the TV or component, you may not be
able to use some of the buttons.
z
z
z
z
z
z
z
z
AV "/1
z
Number buttons
/
z
Changing the preset code of
the remote (Preset mode)
a
ENTER (-)
a
z
z
z
1
Press HOME.
SLEEP (t/
)
The home menu appears on the TV screen.
Color buttons
(red/green/
yellow/blue)
2
3
Press C/c to select
Press X/x to select [Remote Controller
Setting Guide], then press
[Setup].
.
GB
52
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
Press X/x to select [Preset Mode], then
press
.
Saving Power in Standby
Mode
Press X/x to select the component type
that you want to operate with the
supplied remote, then press
.
Check that the following settings are both made:
6
7
Press X/x to select the device’s
– [Control for HDMI] in [HDMI Settings] is set
manufacturer, then press
.
Press POP UP/MENU while pressing
the operation mode button TV (for a TV)
or STB (for a cable box, digital satellite
receiver, digital video recorder, etc.).
The remote enters Preset mode. The TV or
STB operation mode button (whichever
button you pressed) starts flashing.
Browsing Websites
You can connect to the Internet and enjoy
websites like the Sony homepage using the
system.
8
When the TV or STB operation mode
button starts flashing, enter the code
on the TV screen using the number
buttons, then press ENTER.
1
2
Prepare for Internet browsing.
If you successfully set the code, the TV or
STB operation mode button will flash twice
slowly. If the setting is unsuccessful, the
TV or STB operation mode button will
flash five times quickly.
Press HOME.
The home menu appears on the TV screen.
3
4
Press C/c to select
Press X/x to select [Internet Browser],
then press
The [Internet Browser] display appears.
[Network].
.
• You can quit Preset mode by pressing the TV or STB
operation mode button (whichever button is
flashing).
• If you do not operate the remote for more than 10
seconds during presetting mode, the remote exits
from presetting mode.
• Some websites may not display correctly, or not
function.
To enter a URL
Select [URL entry] from the options menu.
Enter the URL using the software keyboard,
then select [Enter].
Clearing the preset code from
the remote’s memory
1
Press and hold AV ?/1 first, then press
2 –, then press CH –.
To set the default start page
While the page you want to set is displayed,
select [Set as start page] from the options menu.
The BD, TV, and STB operation buttons
light up.
To return to the previous page
Select [Previous page] from the options menu. If
the previous page does not appear even if you
select [Previous page], select [Window List]
from the options menu and select the page you
want to return to from the list.
2
Release all buttons.
The BD, TV, and STB operation mode
buttons turn off and the preset code is
cleared. The remote returns to its default
settings.
To quit Internet Browser
Press HOME.
GB
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Items
Details
Internet Browser display
[Browser Setup]
Displays the Internet Browser
settings.
You can check website information by pressing
DISPLAY. The display information differs
depending on the website and page status.
• [Zoom]: Increases or
decreases the size of the
displayed contents.
• [JavaScript Setup]: Sets
whether to enable or disable
JavaScript.
• [Cookie Setup]: Sets
whether or not to accept
browser cookies.
• [SSL Alarm Display]: Sets
whether to enable or disable
SSL.
[Input]
Displays the software
keyboard to enter characters
while browsing a website.
A
B
Page title
Cursor
[Break]
[Delete]
Moves the cursor to the next
line in the text input field.
Move by pressing C/X/x/c. Place the cursor
on the link you want to view, then press
The linked website is displayed.
.
Erases one character on the
left side of the cursor during
text input.
C
D
Page address
[Window List]
Displays a list of all currently
opened websites.
SSL icon
Appears when the linked URL is secured.
Allows you to return to a
previously displayed website
by selecting the window.
E
F
G
H
Signal strength indicator
Appears when the system is connected to a
wireless network.
[Bookmark List]
Displays the bookmark list.
Progress bar/Loading icon
Appears when the page is being read, or during
file download/transfer.
[Character encoding] Sets the character code.
[Previous page]
Moves to a previously
displayed page.
Text input field
Press , then choose [Input] from the options
menu to open the software keyboard.
[Next page]
Moves to the previously
displayed next page.
[Cancel loading]
[Reload]
Stops loading a page.
Reloads the same page.
Scroll bar
Press C/X/x/c to move the page display left,
up, down, or right.
[URL entry]
Allows you to enter a URL
when the software keyboard
is displayed.
[Add to Bookmark]
[Set as start page]
Adds the currently displayed
website to the bookmark list.
Available options
Sets the currently displayed
website as the default start
page.
Various settings and operations are available by
pressing OPTIONS.
The available items differ depending on the
situation.
[Open in new
window]
Opens a link in a new
window.
[Display certificate] Displays server certificates
sent from pages that support
SSL.
GB
54
Download from Www.Somanuals.com. All Manuals Search And Download.
8
9
Press C/c to select [Start], then press
.
Further Settings for the
Wireless System
To return to the previous display, select
[Cancel].
After the message [Secure Link setting
is complete.] appears, press
.
Activating wireless
transmission between specific
units
The subwoofer is linked to the main unit
and the LINK/STANDBY indicator turns
orange.
If the message [Cannot set Secure Link.]
appears, follow the on-screen messages.
[Secure Link]
To cancel the Secure Link
function
You can specify the wireless connection to link
the main unit to the subwoofer using the Secure
Link function.
For the main unit
This function can help prevent interference if
you use multiple wireless products or your
neighbors use wireless products.
Select [Off] on Step 6 above.
For the subwoofer
Press and hold SECURE LINK on the rear of the
subwoofer until the LINK/STANDBY indicator
turns green or flashes green.
1
Press HOME.
The home menu appears on the TV screen.
2
3
Press C/c to select
Press X/x to select [System Settings],
then press
Press X/x to select [Wireless Sound
Connection], then press
[Setup].
If wireless transmission is
unstable
.
4
[RF Channel]
.
The [Wireless Sound Connection] display
appears.
If you use multiple wireless systems, such as a
wireless LAN (Local Area Network) or
Bluetooth, the wireless signals may be unstable.
In this case, the transmission may be improved
by changing the following [RF Channel] setting.
1
Press HOME.
The home menu appears on the TV screen.
2
3
Press C/c to select
Press X/x to select [System Settings],
then press
Press X/x to select [Wireless Sound
Connection], then press
[Setup].
.
5
6
Press X/x to select [Secure Link], then
press
.
4
.
Press X/x to select [On], then press
.
The [Wireless Sound Connection] display
appears.
To cancel the Secure Link function, select
[Off].
5
6
Press X/x to select [RF Channel], then
press
Press X/x to select the desired setting,
then press
.
7
Press SECURE LINK on the rear of the
subwoofer.
Proceed to the next Step within a few
minutes.
.
GB
55
Download from Www.Somanuals.com. All Manuals Search And Download.
• [Auto]: Normally select this. The system
automatically selects the better channel
for transmission.
• [1], [2], [3]: The system transmits sound
by fixing the channel for transmitting.
Select the channel with the better
transmission.
• The transmission may be improved by changing the
transmission channel (frequency) of the other
wireless system(s). For details, refer to the operating
instructions of the other wireless system(s).
4
Press X/x to select [Internet Settings],
then press
.
The [Internet Settings] display appears.
For BDV-L800/BDV-L800M
Setting up the Network
[Internet Settings]
Before setting, connect the system to the
network. For details, see “Connecting to the
To open the setting display
For BDV-L600
1
Press HOME.
1
4
7
2
5
8
0
3
6
9
HOME
• The [Internet Settings] items are necessary to connect
to the Internet. Enter the respective (alphanumeric)
values for your broadband router or Wireless LAN
router. The items that need to be set may differ,
depending on the Internet service provider or the
router. For details, refer to the instruction manuals
that have been provided by your Internet service
provider or supplied with the router.
The home menu appears on the TV screen.
Press C/c to select [Setup].
2
3
• For more information, go to the following URL.
For customers in Europe:
For customers in other countries/regions:
Press X/x to select [Network Settings],
then press
.
GB
56
Download from Www.Somanuals.com. All Manuals Search And Download.
– [Primary DNS]
When connecting to the LAN
with a LAN cable
– [Secondary DNS]
• [Specify IP address]: Enter the network
settings manually according to your
network environment.
Press C/X/x/c and the number buttons to
set the following items, then press
Follow the Steps below for connecting to a LAN
(Local Area Network).
.
Auto setting
– [IP Address]
– [Subnet Mask]
1
Press X/x to select [Wired Setup] on
the [Internet Settings] display, then
– [Default Gateway]
– [Primary DNS]
press
.
2
Press X/x to select [Auto], then press
– [Secondary DNS]
.
4
Press X/x to select the proxy server
setting, then press
The system performs the network setting
automatically, and internet settings appear
on the TV screen.
.
• [No]: A proxy server is not used.
• [Yes]: Enter the proxy server setting.
Press C/X/x/c and the number buttons,
3
4
Press c.
then press
.
Press X/x to select [Save & Connect],
The value of the internet settings appears on
the TV screen.
then press
.
The system starts checking the network
connection.
5
6
Press c.
5
Check that the message [Internet
Settings is now complete.] appears,
Press X/x to select [Save & Connect],
then press
.
then press
.
The system starts checking the network
connection.
The setup is finished. If the message does
not appear, follow the on-screen messages.
7
Check that the message [Internet
Settings is now complete.] appears,
Manual setting
then press
.
1
Press X/x to select [Wired Setup] on
the [Internet Settings] display, then
The setup is finished. If the message does
not appear, follow the on-screen messages.
press
Press X/x to select [Custom], then
press
Press X/x to select the network setting
type, then press
.
2
3
.
When connecting to the
wireless LAN with the system’s
built-in Wi-Fi or the USB
Wireless LAN Adapter
.
• [Auto]: The system sets the IP address
automatically, and the [DNS Settings]
display appears.
Follow the Steps below for connecting to a
wireless LAN (Local Area Network).
When you select [Auto] and press
system sets the DNS setting
automatically.
, the
When you select [Specify IP address] and
press
, enter the DNS settings
manually.
Press C/X/x/c and the number buttons to
set the following items, then press
.
GB
57
Download from Www.Somanuals.com. All Manuals Search And Download.
the LAN with a LAN cable” above.
When your wireless router is
compatible with the WPS
function
x When the selected wireless LAN is
secured
The display for entering a WEP or WPA
key appears. Go to Step 5.
1
Press X/x to select [Wireless
Setup(built-in)]* or [USB Wireless
Setup] on the [Internet Settings]
display, then press
.
x To specify the wireless LAN name
Select [Manual Entry].
* BDV-L800/BDV-L800M only.
The input display appears. Enter the
wireless LAN name by following the on-
screen messages, then press c.
2
3
Press X/x to select [Wi-Fi Protected
Setup (WPS)], then press
.
Activate the WPS function of your
wireless router, press X/x to select
4
Press X/x to select the security mode,
[Start], then press
.
then press
.
For details about activating the WPS
function, see the operating instructions of
your router.
• [None]: Select this if the wireless LAN is
unsecured. Setup of wireless LAN
connectivity is finished. Next, enter the IP
address settings by following the Steps of
LAN cable” above.
4
Check that the message [Wi-Fi
Protected Setup was successful.]
appears, then press c.
Setup of wireless LAN connectivity and the
IP address is finished.
• [WEP]: The wireless LAN is protected by
a WEP key.
Next, enter the proxy server setting. Follow
above.
• [WPA/WPA2-PSK]: The wireless LAN is
protected by a WPA-PSK or WPA2-PSK.
• [WPA2-PSK]: The wireless LAN is
protected by a WPA2-PSK.
When your wireless router is not
compatible with the WPS
function
5
Enter the WEP key/WPA key by
following the on-screen messages,
then press c.
Setup of wireless LAN connectivity is
finished. Next, enter the IP address settings
by following the Steps of “Auto setting” or
the LAN with a LAN cable” above.
1
2
3
Press X/x to select [Wireless
Setup(built-in)]* or [USB Wireless
Setup] on the [Internet Settings]
display, then press
.
* BDV-L800/BDV-L800M only.
Press X/x to select [Scan], then press
.
About wireless LAN security
The system searches for available wireless
LANs, then the list of wireless LANs
appears.
Since communication via the wireless LAN
function is established by radio waves, the
wireless signal may be susceptible to
interception. To protect wireless
Press X/x to select the wireless LAN
name, then press
.
communication, this system supports various
security functions. Be sure to correctly
configure the security settings in accordance
with your network environment.
x When the selected wireless LAN is
unsecured
Setup of wireless LAN connectivity is
finished. Next, enter the IP address settings
GB
58
Download from Www.Somanuals.com. All Manuals Search And Download.
No Security
Although you can easily make settings, anyone
can intercept wireless communication or intrude
into your wireless network, even without any
sophisticated tools. Keep in mind that there is a
risk of unauthorized access or interception of
data.
WEP
WEP applies security to communications to
prevent outsiders from intercepting
communications or intruding into your wireless
network. WEP is a legacy security technology
that enables older device which do not support
TKIP/AES to be connected.
WPA-PSK (TKIP), WPA2-PSK
(TKIP)
TKIP is a security technology developed in
response to the deficiencies of WEP. TKIP
assures a higher security level than WEP.
WPA-PSK (AES), WPA2-PSK (AES)
AES is a security technology that uses an
advanced security method distinct from WEP
and TKIP.
AES assures a higher security level than WEP or
TKIP.
GB
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Icon
Explanation
Makes the screen settings
Settings and Adjustments
according to the type of
connecting jacks.
Using the Setup Display
You can make various adjustments of items such
Makes the audio settings
according to the type of
connecting jacks.
as picture and sound.
Select
(Setup) on the home menu when you
Makes detailed settings for BD/
need to change the settings of the system.
The default settings are underlined.
DVD playback.
Makes detailed settings for the
• Playback settings stored in the disc take priority over
the Setup Display settings and not all the functions
described may work.
Parental Control function.
1
2
Press HOME.
Makes detailed settings for
Super Audio CD playback.
The home menu appears on the TV screen.
Press C/c to select
[Setup].
Makes the system-related
settings.
Makes detailed settings for
Internet and network.
Re-runs the Easy Setup to make
the basic settings.
Resets the system to the factory
settings.
3
Press X/x to select the setup category
icon to change, then press
.
Example: [Screen Settings]
[Remote Controller
Setting Guide]
x [Preset Mode]
You can change the preset code of the remote for
controlling non-Sony components. For details,
You can setup the following options.
Icon
Explanation
Makes the remote settings for
operating the TV or other
components.
Updates the software of the
system.
GB
60
Download from Www.Somanuals.com. All Manuals Search And Download.
x [TV Type]
[Network Update]
[16:9]: Select this when connecting to a wide-
screen TV or a TV with a wide-mode function.
[4:3]: Select this when connecting to a 4:3
screen TV without a wide-mode function.
x [Screen Format]
[Original]: Select this when connecting to a TV
with a wide-mode function. Displays a 4:3
screen picture in 16:9 aspect ratio even on a
wide-screen TV.
You can update and improve the functions of the
system.
For information about update functions, refer to
the following website:
[Fixed Aspect Ratio]: Changes the picture size
to fit the screen size with the original picture
aspect ratio.
x [DVD Aspect Ratio]
[Letter Box]: Displays a wide picture with black
bands on the top and bottom.
For customers in Europe:
For customers in other countries/regions:
During a software update, “UPDATING”
appears in the front panel display. After the
update completes, the main unit automatically
turns off. Please wait for the software update to
complete; do not turn the main unit on or off, or
operate the main unit or TV.
[Pan & Scan]: Displays a full-height picture on
the entire screen, with trimmed sides.
x [Cinema Conversion Mode]
[Screen Settings]
[Auto]: Normally select this. The main unit
automatically detects whether the material is
video-based or film-based, and switches to the
appropriate conversion method.
[Video]: The conversion method suited for
video-based material will always be selected
regardless of the material.
x [3D Output Setting]
[Auto]: Normally select this.
[Off]: Select this to display all contents in 2D.
• 3D video from the HDMI IN 1 or HDMI IN 2 jack is
output regardless of this setting.
x [Output Video Format]
x [TV Screen Size Setting for 3D]
Sets the screen size of your 3D compatible TV.
[HDMI]: Normally select [Auto]. Select
[Original Resolution] to output the resolution
recorded on the disc. (When the resolution is
lower than SD resolution, it is scaled up to SD
resolution.)
• This setting does not apply to 3D video from the
HDMI IN 1 or HDMI IN 2 jack.
[Video]: Automatically sets the lowest
resolution.
GB
61
Download from Www.Somanuals.com. All Manuals Search And Download.
• When connecting the HDMI OUT jack and the video
output jack at the same time, select [Video].
• If no picture appears when setting [HDMI]
resolution, select [Video].
[Audio Settings]
x [BD Audio MIX Setting]
[On]: Outputs the audio obtained by mixing the
interactive audio and secondary audio to the
primary audio.
x [BD/DVD-ROM 1080/24p Output]
[Auto]: Outputs 1920 × 1080p/24 Hz video
signals only when connecting a 1080/24p-
compatible TV using the HDMI OUT jack.
[Off]: Select this when your TV is not
compatible with 1080/24p video signals.
[Off]: Outputs the primary audio only.
x [DTS Neo:6]
Simulates multi-channel surround sound from 2
channel sources according to the capability of
the connected device, and outputs the sound via
the HDMI OUT jack.
x [YCbCr/RGB (HDMI)]
[Auto]: Automatically detects the type of
external device, and switches to the matching
color setting.
[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2 video
signals.
[Cinema]: Outputs simulated multi-channel
sound from 2 channel sources using DTS Neo:6
Cinema mode.
[Music]: Outputs simulated multi-channel
sound from 2 channel sources using DTS Neo:6
Music mode.
[Off]: Outputs sound with its original number of
channels.
[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4 video
signals.
[RGB]: Select this when connecting to a device
with an HDCP-compliant DVI jack.
x [HDMI Deep Colour Output]
[Auto]: Normally select this.
x [Audio DRC]
You can compress the dynamic range of the
sound track.
[16bit], [12bit], [10bit]: Outputs 16bit/12bit/
10bit video signals when the connected TV is
compatible with Deep Colour.
[Auto]: Performs playback at the dynamic range
specified by the disc (BD-ROM only).
[On]: The system reproduces the sound track
with the kind of dynamic range that the
recording engineer intended.
[Off]: Select this when the picture is unstable or
colors appear unnatural.
x [Pause Mode] (BD/DVD VIDEO/DVD-R/
DVD-RW only)
[Auto]: The picture, including subjects that
move dynamically, is output with no jitter.
Normally select this position.
[Off]: No compression of dynamic range.
x [Audio Output]
You can select the output method where the
audio signal is output.
[Frame]: The picture, including subjects that do
not move dynamically, is output in high
resolution.
[Speaker]: Outputs sound from the system’s
speakers only.
[Speaker + HDMI]: Outputs sound from the
system’s speakers and 2-channel linear PCM
signals from the HDMI OUT jack.
[HDMI]: Outputs sound from the HDMI OUT
jack only. Sound format depends on the
connected component.
GB
62
Download from Www.Somanuals.com. All Manuals Search And Download.
[Audio Output] is set to [Speaker + HDMI]
automatically and this setting cannot be changed.
• Audio signals are not output from the HDMI OUT
jack when [Audio Output] is set to [Speaker + HDMI]
[TV]. (European models only.)
[BD/DVD Viewing
Settings]
You can make detailed settings for BD/DVD
playback.
• When [Audio Output] is set to [HDMI], the output
signal format for the “TV” function is 2-channel
linear PCM. (European models only.)
x [BD/DVD Menu]
You can select the default menu language for
BD-ROMs or DVD VIDEOs.
When you select [Select Language Code], the
display for entering the language code appears.
Enter the code for your language by referring to
x [Sound Effect]
You can set the system’s sound effects (SOUND
MODE and [Surround Setting]) to on/off.
[On]: Enables all of the system’s sound effects.
The upper limit of sampling frequency is set to
48 kHz.
[Off]: The sound effects are disabled. Select this
when you do not want to set the upper limit of
sampling frequency.
x [Audio]
You can select the default track language for
BD-ROMs or DVD VIDEOs.
When you select [Original], the language given
priority in the disc is selected.
When you select [Select Language Code], the
display for entering the language code appears.
Enter the code for your language by referring to
x [Surround Setting]
You can select the surround setting. For details,
x [Subtitle]
You can select the default subtitle language for
BD-ROMs or DVD VIDEOs.
When you select [Select Language Code], the
display for entering the language code appears.
Enter the code for your language by referring to
x [Speaker Settings]
To obtain the best possible surround sound, set
the speakers. For details, see “Setting the
x [BD Hybrid Disc Playback Layer]
[BD]: Plays BD layer.
[DVD/CD]: Plays DVD or CD layer.
x [BD Internet Connection]
[Allow]: Normally select this.
[Do not allow]: Prohibits Internet connection.
GB
63
Download from Www.Somanuals.com. All Manuals Search And Download.
[Parental Control
Settings]
[Music Settings]
You can make detailed settings for Super Audio
CD playback.
x [Password]
x [Super Audio CD Playback Layer]
[Super Audio CD]: Plays the Super Audio CD
layer.
Set or change the password for the Parental
Control function. A password allows you to set
a restriction on BD-ROM, DVD VIDEO, or
Internet video playback. If necessary, you can
differentiate the restriction levels for BD-ROMs
and DVD VIDEOs.
[CD]: Plays the CD layer.
x [Super Audio CD Playback Channels]
[DSD 2ch]: Plays the 2ch area.
[DSD Multi]: Plays the multi-channel area.
x [Parental Control Area Code]
Playback of some BD-ROMs or DVD VIDEOs
can be limited according to the geographic area.
Scenes may be blocked or replaced with
different scenes. Follow the on-screen
[System Settings]
You can make the system-related settings.
instructions and enter your four-digit password.
x [BD Parental Control]
x [OSD]
Playback of some BD-ROMs can be limited
according to the age of the users. Scenes may be
blocked or replaced with different scenes.
Follow the on-screen instructions and enter your
four-digit password.
You can select your language for the system on-
screen displays.
x [Wireless Sound Connection]
You can make further settings for the wireless
system. For details, see “Further Settings for the
Also, you can check the wireless transmission
status. When wireless transmission is activated,
[OK] appears to the right of [Status].
x [DVD Parental Control]
Playback of some DVD VIDEOs can be limited
according to a predetermined level such as the
age of the users. Scenes may be blocked or
replaced with different scenes. Follow the
on-screen instructions and enter your four-digit
password.
x [Illumination/Display]
You can select the status of the soft-touch
x [Internet Video Parental Control]
Playback of some Internet videos can be limited
according to the age of the users. Scenes may be
blocked or replaced with different scenes.
Follow the on-screen instructions and enter your
four-digit password.
For BDV-L800/BDV-L800M
[All Sync/On]: The illumination LED moves to
match all audio. The soft-touch buttons and the
front panel display stay illuminated.
[Music Sync/On]: The illumination LED moves
to match the music or the radio only. The soft-
touch buttons and the front panel display stay
illuminated.
[Music Sync/Off]: The illumination LED moves
to match the music or the radio only. The soft-
touch buttons and the front panel display turn off
when the system is not being operated.
x [Internet Video Unrated]
[Allow]: Allows the playback of unrated
Internet videos.
[Block]: Blocks the playback of unrated Internet
videos.
GB
64
Download from Www.Somanuals.com. All Manuals Search And Download.
[Simple/Off]: The soft-touch buttons and the
front panel display turn off when the system is
not being operated.
• This function is available only when [Control for
HDMI] is set to [On].
For BDV-L600
[HDMI1 Audio Input Mode] (European models
only)
[Standard/On]: The soft-touch buttons and the
front panel display stay illuminated.
[Simple/Off]: The soft-touch buttons and the
front panel display turn off when the system is
not being operated.
You can select the audio input of the component
that is connected to the HDMI IN 1 jack.
[HDMI1]: The sound of the component that is
connected to the HDMI IN 1 jack is input from
the HDMI IN 1 jack.
[TV]: The sound of the component that is
connected to the HDMI IN 1 jack is input from
the TV DIGITAL IN (OPTICAL) jack.
x [Remote Sensor]
You can select the remote sensor to be used
according to the installation position of the main
unit.
x [Quick Start Mode]
[On]: Shortens the startup time from standby
mode. You can operate the system quickly after
turning it on.
In a vertical
position
In a horizontal
position
[Off]: The default setting.
[Vertical/Horizontal]: Both the remote sensors
are active. The one in the vertical position has
priority.
[Vertical]: Only the remote sensor in the vertical
position is active.
x [Auto Standby]
[On]: Turns on the [Auto Standby] function.
When you do not operate the system for about
30 minutes, the system enters standby mode
automatically.
[Horizontal]: Only the remote sensor in the
horizontal position is active.
[Off]: Turns off the function.
x [Auto Display]
x [HDMI Settings]
[On]: Automatically displays information on the
screen when changing the viewing titles, picture
modes, audio signals, etc.
[Off]: Displays information only when you
press DISPLAY.
[Control for HDMI]
[On]: On. You can operate mutually between
components that are connected with a High
Speed HDMI cable.
[Off]: Off.
x [Screen Saver]
[On]: Turns on the screen saver function.
[Off]: Off.
[Audio Return Channel]
This function is available when you connect the
system and TV that is compatible with the Audio
Return Channel function.
x [Software Update Notification]
[On]: Sets the system to inform you of newer
[Off]: Off.
[Auto]: The system can receive the digital audio
signal of the TV automatically via a High Speed
HDMI cable.
[Off]: Off.
x [Gracenote Settings]
[Auto]: Automatically downloads disc
information when you stop playback of the disc.
To download, the system must be connected to
the network.
GB
65
Download from Www.Somanuals.com. All Manuals Search And Download.
[Manual]: Downloads disc information when
[Video Search] or [Music Search] is selected.
x [Media Remote Device Registration]
Registers your “Media remote” device.
x [System Information]
You can display the system’s software version
information and the MAC address.
x [Registered Media Remote Devices]
Displays a list of your registered “Media
remote” devices.
[Network Settings]
You can make detailed settings for Internet and
[Easy Setup]
Re-runs the Easy Setup to make the basic
network.
settings. Follow the on-screen instructions.
x [Internet Settings]
Connect the system to the network beforehand.
For details, see “Connecting to the network”
[Resetting]
x [Network Connection Diagnostics]
You can run the network diagnostic to check if
the network connection has been made properly.
x [Reset to Factory Default Settings]
You can reset the system settings to the factory
default by selecting the group of settings. All the
settings within the group will be reset.
x [Connection Server Settings]
Sets whether or not to display the connected
DLNA server.
x [Initialize Personal Information]
You can erase your personal information stored
in the system.
x [Renderer Set-up]
[Automatic Access Permission]: Sets whether or
not to allow automatic access from newly
detected DLNA controller.
[Smart Select]: Allows a Sony DLNA controller
to find the system as the target component to
operate by using the infrared ray. You can set
this function to on or off.
[Renderer Name]: Displays the system’s name
as it is listed on other DLNA devices on the
network.
x [Renderer Access Control]
Sets whether or not to accept commands from
DLNA controllers.
x [Party Auto Start]
[On]: Starts a PARTY or joins an existing
PARTY at the request of a networked device
compatible with the PARTY STREAMING
function.
[Off]: Off.
GB
66
Download from Www.Somanuals.com. All Manuals Search And Download.
• Do not place the system in a place where medical
equipment is in use. It may cause a malfunction of
medical equipment.
Additional Information
Precautions
On safety
• To prevent fire or shock hazard, do not place objects
filled with liquids, such as vases, on the system, or
place the system near water, such as near a bathtub or
shower room. Should any solid object or liquid fall
into the cabinet, unplug the system and have it
checked by qualified personnel before operating it
any further.
• If you use a pacemaker or other medical device,
consult your physician or the manufacturer of your
medical device before using the wireless LAN
function.
On operation
• If the system is brought directly from a cold to a warm
location, or is placed in a very damp room, moisture
may condense on the lenses inside the main unit.
Should this occur, the system may not operate
properly. In this case, remove the disc and leave the
system turned on for about half an hour until the
moisture evaporates.
• Do not touch the AC power cords (mains leads) with
wet hands. Doing so may cause an electric shock.
• When you move the system, take out any disc. If you
do not, the disc may be damaged.
On power sources
• If anything falls into the cabinet, unplug the main unit
and have it checked by qualified personnel before
operating it any further.
• Unplug the main unit from the wall outlet (mains) if
you do not intend to use it for an extended period of
time. To disconnect the cord, pull it out by the plug,
never by the cord.
On adjusting volume
• Do not turn up the volume while listening to a section
with very low level inputs or no audio signals. If you
do, the speakers may be damaged when a peak level
section is suddenly played.
On placement
• Place the system in a location with adequate
ventilation to prevent heat build-up in the system.
• At high volume, over long periods of time, the cabinet
becomes hot to the touch. This is not a malfunction.
However, touching the cabinet should be avoided. Do
not place the system in a confined space where
ventilation is poor as this may cause overheating.
• Do not block the ventilation openings by putting
anything on the system. The system is equipped with
a high power amplifier. If the ventilation openings are
blocked, the system can overheat and malfunction.
• Do not place the system on surfaces (rugs, blankets,
etc.) or near materials (curtains, draperies) that may
block the ventilation openings.
On cleaning
• Clean the cabinet, panel, and controls with a soft cloth
slightly moistened with a mild detergent solution. Do
not use any type of abrasive pad, scouring powder or
solvent such as alcohol or benzine.
If you have any questions or problems concerning
your system, please consult your nearest Sony dealer.
• To remove fingerprints on the front panel of the main
unit, wipe it with a slightly moistened, well-wrung
soft cloth (BDV-L800 only).
On cleaning discs, disc/lens
cleaners
• Do not install the system in a confined space, such as
a bookshelf or similar unit.
• Do not use cleaning discs or disc/lens cleaners
(including wet or spray types). These may cause
the apparatus to malfunction.
• Do not install the system near heat sources such as
radiators, air ducts, or in a place subject to direct
sunlight, excessive dust, mechanical vibration, or
shock.
On replacement of parts
• In the events that this system is repaired, repaired
parts may be collected for reuse or recycling
purposes.
• Do not install the system in an inclined position. It is
designed to be operated in a horizontal position only.
• Keep the system and discs away from components
with strong magnets, such as microwave ovens, or
large loudspeakers.
• Do not place heavy objects on the system.
• Do not place metal objects in front of the front panel.
They may limit reception of radio waves.
GB
67
Download from Www.Somanuals.com. All Manuals Search And Download.
On AC adapter
• Use the supplied AC adapter (AC-BD100) for this
player, as other adapters may cause a malfunction.
• Do not disassemble or reverse-engineer.
• Do not confine the AC adapter in a closed place such
as a bookshelf or an AV cabinet.
Notes about the Discs
On handling discs
• To keep the disc clean, handle the disc by its
edge. Do not touch the surface.
• Do not connect the AC adapter to a traveler’s electric
transformer, which may generate heat and cause a
malfunction.
• Do not stick paper or tape on the disc.
• Do not drop or apply shock.
• The equipment shall not be exposed to dripping or
splashing.
• The appliance coupler/inlet shall be easily accessible
and readily operable.
• Do not expose the disc to direct sunlight or
heat sources such as hot air ducts, or leave it in
a car parked in direct sunlight as the
temperature may rise considerably inside the
car.
On your TV’s color
• If the speakers should cause the TV screen to have
color irregularity, turn off the TV then turn it on after
15 to 30 minutes. If color irregularity should persist,
place the speakers further away from the TV set.
• After playing, store the disc in its case.
IMPORTANT NOTICE
Caution: This system is capable of holding a still
On cleaning
• Before playing, clean the disc with a cleaning
cloth.
Wipe the disc from the center out.
video image or on-screen display image on your
television screen indefinitely. If you leave the still
video image or on-screen display image displayed
on your TV for an extended period of time you risk
permanent damage to your television screen.
Projection televisions are especially susceptible to
this.
On moving the system
• Before moving the system, make sure that there is no
disc inserted, and remove the AC power cords (mains
leads) from the wall outlet (mains).
• Do not use solvents such as benzine, thinner,
commercially available cleaners, or anti-static
spray intended for vinyl LPs.
This system can only play a standard circular
disc. Using neither standard nor circular discs
(e.g., card, heart, or star shape) may cause a
malfunction.
Do not use a disc that has a commercially
available accessory attached, such as a label or
ring.
GB
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If you experience any of the following difficulties while using the system, use this troubleshooting
guide to help remedy the problem before requesting repairs. Should any problem persist, consult your
nearest Sony dealer.
Note that if service personnel changes some parts during repair, these parts may be retained.
In the event of a problem with the wireless sound function, have a Sony dealer check the entire system
together (main unit and subwoofer).
General
Symptom
Problems and solutions
The power is not turned on.
• Check that the AC power cords (mains leads) for the main unit and subwoofer
are connected securely.
• Check that the AC power cord (mains lead) of the main unit is connected
securely to the AC adapter.
• Check that the connector of the AC adapter is connected securely to the DC IN
14V connector on the rear of the main unit.
The remote does not function.
• The distance between the remote and the main unit is too far.
• The batteries in the remote are weak.
The disc does not eject and you • Try the following: 1 Press and hold N and Z on the main unit for more than
cannot remove the disc even
after you press Z.
5 seconds to eject the disc. 2 Remove the disc. 3 Disconnect the AC power
cord (mains lead) from the wall outlet (mains), then reconnect after several
minutes.
The system does not work
normally.
• Disconnect the AC power cord (mains lead) from the wall outlet (mains), then
reconnect after several minutes.
Messages
Symptom
Problems and solutions
[A new software version is
available. Please go to the
“Setup” section of the menu and
select “Network Update” to
perform the update.] appears on
the TV screen.
version.
“PROTECTOR” and “PUSH
Press "/1 to turn off the system, and check the following items after
PWR” appear alternately in the “STANDBY” disappears.
front panel display.
• Is anything blocking the ventilation openings of the system?
• After checking the above items and fixing any problems, turn on the system. If
the cause of the problem cannot be found even after checking all the above
items, consult your nearest Sony dealer.
panel display.
“DEMO LOCK” appears in the • Contact your nearest Sony dealer or local authorized Sony service facility.
front panel display.
“Exxxx” appears in the front
panel display.
• Contact your nearest Sony dealer or local authorized Sony service facility and
give the error code.
appears without any
messages on the entire TV
screen.
• Contact your nearest Sony dealer or local authorized Sony service facility.
GB
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture
Symptom
Problems and solutions
There is no picture.
There is no picture when you
make an HDMI cable
connection.
• The main unit is connected to an input device that is not HDCP (High-
bandwidth Digital Content Protection) compliant (“HDMI” on the front panel
• Check that the HDMI OUT jack of the main unit and the HDMI IN jack of your
TV are connected via a High Speed HDMI cable.
3D images from the HDMI IN 1 • Depending on the TV or video component, 3D images may not appear.
or HDMI IN 2 jack do not appear
on the TV screen.
• The TV may take time to detect 3D signals.
No picture appears when the
• Press and hold N and VOL – on the main unit for more than 5 seconds to reset
video output resolution selected the video output resolution to the lowest resolution.
in [Output Video Format] is
incorrect.
dark/the bright area is too bright
or unnatural.
The picture is not output
correctly.
• If the analog and digital signals are output at the same time, set [BD/DVD-
• For BD-ROMs, check the [BD/DVD-ROM 1080/24p Output] settings in
Picture noise appears.
• Clean the disc.
• If the picture output from your system goes through your VCR to get to your
TV, the copy-protection signal applied to some BD/DVD programs could affect
picture quality. If you still experience problems even when you connect your
main unit directly to your TV, try connecting your main unit to the other input
jacks.
entire TV screen.
• The aspect ratio on the disc is fixed.
Color irregularity occurs on the • If the speakers are used with a CRT-based TV or projector, install the speakers
TV screen.
at least 0.3 meters from the TV set.
• If the color irregularity persists, turn off the TV set once, then turn it on after 15
to 30 minutes.
• Make sure that no magnetic object (magnetic latch on a TV stand, health care
device, toy, etc.) is placed near the speakers.
There is no picture after playing • Select the input on your TV for this system.
a video/photo file on the iPod/
iPhone.
GB
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound
Symptom
Problems and solutions
There is no sound or wireless
transmission is not activated.
• The speaker cord is not connected securely.
• Check that the AC power cord (mains lead) of the subwoofer is connected
securely.
• Check that the volume of the main unit is other than “0.”
• Check the status of the LINK/STANDBY indicator on the subwoofer.
– Turns off.
– Check that the AC power cord (mains lead) of the subwoofer is connected
securely.
– Turn the subwoofer on by pressing "/1 on the subwoofer.
– Flashes green quickly.
– 1 Press "/1 on the subwoofer. 2 Insert the wireless transceiver into the
subwoofer correctly. 3 Press "/1 on the subwoofer.
– Flashes red.
– Press "/1 to turn off the subwoofer, and check the following items.
1Are the + and – speaker cords short-circuited?
2Is anything blocking the ventilation openings of the subwoofer?
After checking the above items and fixing any problems, turn on the
subwoofer. If the cause of the problem cannot be found even after
checking all the above items, consult your nearest Sony dealer.
– Flashes green or orange slowly or turns red.
– Make sure that the wireless transceiver is inserted correctly into the main
unit.
– Sound transmission is poor. Move the subwoofer so that the LINK/
STANDBY indicator turns green or orange.
– Move the system away from other wireless devices.
– Avoid using any other wireless devices.
– Turns green or orange.
– Check the speaker connections.
The Super Audio CD sound of a • HDMI IN 1 and HDMI IN 2 does not accept an audio format that contains copy
component that is connected to
the HDMI IN 1 or HDMI IN 2
jack is not output.
protection.
There is no sound from the TV • Set [Control for HDMI] in [HDMI Settings] of [System Settings] to [On]
via the HDMI OUT jack when (page 65). Also, set [Audio Return Channel] in [HDMI Settings] of [System
function.
• Make sure that your TV is compatible with the Audio Return Channel function.
• Make sure that a High Speed HDMI cable is connected to a jack on your TV
that is compatible with the Audio Return Channel function.
The system does not output
• Set [Audio Return Channel] in [HDMI Settings] of [System Settings] to [Off]
to a set-top box.
Severe hum or noise is heard.
• Move your TV away from the audio components.
• Clean the disc.
The sound loses stereo effect
when you play a CD.
• Select stereo sound by pressing
The left and right sounds are
unbalanced or reversed.
• Check that the speakers and components are connected correctly and securely.
GB
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Problems and solutions
Sound is unstable.
• The Position Control function of your TV is enabled. For details on disabling
the function, refer to the operating instructions of your TV.
Noise is heard from front
• Wireless transmission is unstable. Change the [RF Channel] setting in
speakers skips.
• Install the main unit and subwoofer closer to each other.
• Do not install the main unit and subwoofer in a closed rack, on a metal rack, or
under a table.
Tuner
Symptom
Problems and solutions
Radio stations cannot be tuned • Check that the antenna (aerial) is connected securely. Adjust the antenna
in.
(aerial) or connect an external antenna (aerial) if necessary.
• The signal strength of the stations is too weak (when tuning in with automatic
tuning). Use direct tuning.
Playback
Symptom
Problems and solutions
The disc does not play.
• The region code on the BD/DVD does not match the system.
• Moisture has condensed inside the main unit and may cause damage to the
lenses. Remove the disc and leave the main unit turned on for about half an
hour.
File names are not displayed
correctly.
• The system can only display ISO 8859-1-compliant character formats. Other
character formats may be displayed differently.
• Depending on the writing software used, the input characters may be displayed
differently.
A disc does not start playing
from the beginning.
• Resume play has been selected. Press OPTIONS and select [Play from start],
then press
.
Playback does not start from the • The resume point may be cleared from memory depending on the disc when
resume point where you last
stopped playing.
– you eject the disc.
– you disconnect the USB device.
– you play other content.
– you turn off the main unit.
The language for the soundtrack/ • Try using the BD’s or DVD’s menu.
subtitle or angles cannot be
changed.
• Multi-lingual tracks/subtitles or multi-angles are not recorded on the BD or
DVD being played.
Bonus contents or other data that • Try the following: 1 Remove the disc. 2 Turn the system off. 3 Remove and
are contained in a BD-ROM
cannot be played.
ROM with BONUSVIEW/BD-LIVE.
GB
72
Download from Www.Somanuals.com. All Manuals Search And Download.
USB device
Symptom
Problems and solutions
The USB device is not
recognized.
• Try the following: 1 Turn the system off. 2 Remove and reconnect the USB
device. 3 Turn the system on.
• Make sure that the USB device is securely connected to the
• Check if the USB device or a cable is damaged.
• Check if the USB device is on.
(USB) port.
• If the USB device is connected via a USB hub, disconnect it and connect the
USB device directly to the main unit.
BRAVIA Internet Video
Symptom
Problems and solutions
The picture/sound is poor/certain • Picture/sound quality may be poor depending on Internet content providers.
programs display with a loss of
detail, especially during fast-
motion or dark scenes.
• Picture/sound quality may be improved by changing the connection speed.
Sony recommends a connection speed of at least 2.5 Mbps for standard-
definition video and 10 Mbps for high-definition video.
• Not all videos contain sound.
The picture is small.
• Press X to zoom in.
“BRAVIA” Sync ([Control for HDMI])
Symptom
Problems and solutions
The [Control for HDMI]
function does not work
(“BRAVIA” Sync).
• If you change the HDMI connection, turn the system off and on again.
• If power failure occurs, set [Control for HDMI] to [Off], then set [Control for
• Check the following and refer to the operating instructions supplied with the
component.
– the connected component is compatible with the [Control for HDMI]
function.
– the connected component’s setting for the [Control for HDMI] function is
correct.
Network connection
Symptom
Problems and solutions
The system cannot connect to the • Check the network connection (page 23) and the network settings (page 66).
network.
GB
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Built-in/USB wireless LAN connection
Symptom
Problems and solutions
You cannot connect your PC to • The wireless settings of the router may change automatically if you use the
the Internet after [Wi-Fi
Protected Setup (WPS)] is
performed.
Wi-Fi Protected Setup function before adjusting the settings of the router. In
this case, change the wireless settings of your PC accordingly.
You cannot connect the system • Check if the wireless LAN router is on.
to your wireless LAN router.
• Depending on the usage environment, including the wall material, radio wave
reception conditions, or obstacles between the system and the wireless LAN
router, the possible communication distance may be shortened. Move the
system and the wireless LAN router closer to each other.
• Devices that use a 2.4 GHz frequency band, such as a microwave, Bluetooth, or
digital cordless device, may interrupt the communication. Move the main unit
away from such devices, or turn off such devices.
The desired wireless router is not • Press RETURN to return to the previous screen, and try [Scan] again. If the
detected even if [Scan] is
performed.
desired wireless router is still not detected, press RETURN to select [Manual
registration].
The system cannot connect to the • The distance between the main unit and the wireless LAN router is too far
network or the network
connection is unstable.
GB
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Note on playback operations of a
BD/DVD
Some playback operations of a BD/DVD may be
intentionally set by software producers. Since
this system plays a BD/DVD according to the
disc contents the software producers designed,
some playback features may not be available.
Playable Discs
1)
Blu-ray Disc
BD-ROM
2)
BD-R/BD-RE
DVD-ROM
3)
DVD
DVD-R/DVD-RW
DVD+R/DVD+RW
Note about double-layer BDs/
DVDs
The playback picture and sound may be
3)
CD
CD-DA (Music CD)
CD-ROM
momentarily interrupted when the layers switch.
CD-R/CD-RW
Super Audio CD
Region code (BD-ROM/DVD
VIDEO only)
1)Since the Blu-ray Disc specifications are new and
evolving, some discs may not be playable depending
on the disc type and the version. Also, the audio
output differs depending on the source, connected
output jack, and selected audio settings.
2)BD-RE: Ver.2.1
Your system has a region code printed on the
rear of the main unit and will only play a BD-
ROM/DVD VIDEO (playback only) labeled
ALL
with identical region codes or
.
BD-R: Ver.1.1, 1.2, 1.3 including organic pigment
type BD-R (LTH type)
BD-Rs recorded on a PC cannot be played if
postscripts are recordable.
3)A CD or DVD disc will not play if it has not been
correctly finalized. For more information, refer to the
operating instructions supplied with the recording
device.
Discs that cannot be played
• BDs with cartridge
• BDXLs
• DVD-RAMs
• HD DVDs
• DVD Audio discs
• PHOTO CDs
• Data part of CD-Extras
• Super VCDs
• Audio material side on DualDiscs
Notes on discs
This product is designed to play back discs that
conform to the Compact Disc (CD) standard.
DualDiscs and some music discs encoded with
copyright protection technologies do not
conform to the Compact Disc (CD) standard.
Therefore, these discs may not be compatible
with this product.
GB
75
Download from Www.Somanuals.com. All Manuals Search And Download.
– up to 500 files in a single tree
• The system can recognize the following files or
folders stored in the DLNA server:
Playable Types of Files
Video1)
– up to folders in the 18th tree
– up to 999 files in a single tree
• Some USB devices may not work with this system.
• The system can recognize Mass Storage Class (MSC)
devices (such as flash memory or an HDD), Still
Image Capture Devices (SICDs), and 101-key
File format
Extensions
2)5)
MPEG-1 Video/PS
“.mpg,” “.mpeg,” “.m2ts,”
“.mts”
MPEG-2 Video/PS,
2)6)
TS
keyboards (front
(USB) port only).
Xvid
“.avi”
• To avoid data corruption or damage to USB memory
or other devices, turn the system off before
connecting or removing USB memory or other
devices.
2)5)
MPEG4/AVC
“.mkv,” “.mp4,” “.m4v,”
“.m2ts,” “.mts”
2)5)
WMV9
“.wmv,” “.asf”
3)5)
• The system may not play high bit rate video files from
a DATA CD smoothly. It is recommended to play
high bit rate video files using a DATA DVD.
AVCHD
Music
File format
Extensions
MP3 (MPEG-1 Audio
Layer III)
“.mp3”
2)4)5)
AAC
“.m4a”
“.wma”
“.wav”
2)4)
WMA9 Standard
LPCM
Photo1)
File format
JPEG
Extensions
“.jpg,” “.jpeg”
“.gif”
GIF
PNG
“.png”
1)The system does not play these files via the renderer
function.
2)The system does not play files encoded with DRM.
3)The system plays AVCHD-format files that are
recorded via a digital video camera, etc. To watch
AVCHD-format files, the disc with AVCHD-format
files on it must be finalized.
4)The system does not play files encoded with
Lossless, etc.
5)The system does not play these files via the DLNA
function.
6)The system plays SD resolution only via the DLNA
function.
• Some files may not play depending on the file format,
the file encoding, the recording condition, or DLNA
server condition.
• Some files edited on a PC may not play.
• The system can recognize the following files or
folders in BDs, DVDs, CDs and USB devices:
– up to folders in the 3rd tree
GB
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Supported Audio Formats
Audio formats supported by this system are as follows.
Format
LPCM 2ch
LPCM 5.1ch
LPCM 7.1ch
Dolby Digital Dolby
TrueHD,
DTS
DTS-ES
Discrete 6.1,
DTS-ES
Matrix 6.1,
DTS96/24
DTS-HD
High
Resolution
Audio
DTS-HD
Master
Audio
Function
DolbyDigital
Plus
“BD/DVD”
a
a
a
a
a
a
a
a
a
a
a
“HDMI1”
“HDMI2”
–
–
–
–
–
“TV”
(DIGITAL IN)
a
–
a
–
a
–
–
–
a: Supported format.
–: Unsupported format.
• HDMI IN 1 and HDMI IN 2 jacks do not input sound in the case of an audio format that contains copy protections
such as Super Audio CD or DVD-Audio.
• For the LPCM 2ch format, the supported sampling frequency of the digital signal is up to 96 kHz when using the
“HDMI1” or “HDMI2” function, and 48 kHz when using the “TV” function.
GB
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Antenna (aerial)
FM wire antenna (aerial)
Antenna (aerial) terminals 75 ohms, unbalanced
Specifications
Amplifier Section
Intermediate frequency
250 kHz/300 kHz/
350 kHz/400 kHz
General (Main Unit, AC Adapter (AC-
BD100))
POWER OUTPUT (reference)
Subwoofer:
120 W (at 4 ohms, 80 Hz)
Power requirements (AC Adapter)
BDV-L800/BDV-L800M:
POWER OUTPUT (rated)
Front L/Front R:
Input: 110 V - 240 V AC,
50/60 Hz
Output: 14 V DC, 3.3 A
Operating Temperature:
40 °C (MAX)
85 W + 85 W (at 4 ohms,
1 kHz, 1% THD)
POWER OUTPUT (reference)
Front L/Front R:
130 W (per channel at
Power consumption
On: 30 W
4 ohms, 1 kHz)
Standby: 0.3 W (at the
Power Saving mode)
BDV-L600:
POWER OUTPUT (rated)
Front L/Front R:
Dimensions (approx.)
AC Adapter
80 W + 80 W (at 4 ohms,
1 kHz, 1% THD)
122 mm × 37 mm × 64 mm
(w/h/d)
POWER OUTPUT (reference)
Main Unit
480 mm × 46 mm × 232
mm (w/h/d)
Front L/Front R:
115 W (per channel at
4 ohms, 1 kHz)
480 mm × 259 mm × 103
mm (w/h/d) (with stand)
480 mm × 105 mm × 231
mm (w/h/d) (in a
Inputs (Digital)
TV (Audio Return Channel/OPTICAL)
Supported formats: LPCM
2CH (up to 48 kHz), Dolby
Digital, DTS
horizontal position)
Mass (approx.)
AC Adapter
Main Unit
HDMI IN 1/HDMI IN 2 Supported formats: LPCM
2CH (up to 96 kHz), Dolby
0.3 kg
L800: 3.2 kg
4.2 kg (with stand)
L800M:3.3 kg
4.3 kg (with stand)
L600: 3.0 kg
4.0 kg (with stand)
Digital, DTS
Video Section
Outputs
VIDEO: 1 Vp-p 75 ohms
Type A (19pin)
HDMI Section
Connector
BD/DVD/Super Audio CD/CD System
Speakers
Signal format system
NTSC/PAL
Front Speaker (SS-TSL800) for BDV-L800/
BDV-L800M
USB Section
(USB) port:
Type A (For connecting
USB memory, memory
card reader, digital still
camera, and digital video
camera)
Speaker system
2-Way 2-Driver Speaker
system
Speaker unit
Tweeter: 25 mm dome
type
Full range: 65 mm cone
type
LAN Section
LAN(100) terminal
Rated impedance
4 ohms
100BASE-TX Terminal
Dimensions (approx.)
123 mm × 475 mm × 137
mm (w/h/d)
Wireless LAN Section
BDV-L800/BDV-L800M
Standards Compliance
Frequency and Channel 2.4 GHz - 2.4835 GHz
[CH1 -13]
Mass (approx.)
1.3 kg
IEEE 802.11 b/g/n
Front Speaker (SS-TSL600) for BDV-L600
Speaker system
2-Way 2-Driver Speaker
system Bass reflex
Tweeter: 25 mm dome
type
FM Tuner Section
System
Speaker unit
PLL quartz-locked digital
synthesizer
87.5 MHz - 108.0 MHz (50
kHz step)
Full range: 50 mm cone
type
Tuning range
Rated impedance
4 ohms
GB
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Dimensions (approx.)
Mass (approx.)
112 mm × 320 mm × 112
mm (w/h/d)
0.9 kg
Active Subwoofer (SA-WSL600)
Speaker system
Subwoofer
Speaker unit
Rated impedance
Dimensions (approx.)
160 mm cone type
4 ohms
275 mm × 395 mm × 290
mm (w/h/d)
Mass (approx.)
9 kg
General (Subwoofer)
Power requirements
220 V - 240 V AC,
50/60 Hz
Power consumption
On: 70 W
Standby: Approx. 0.6 W
Off: 0.3 W
Wireless transceiver (EZW-RT50)
Communication system
Wireless sound
Specification version 1.0
23 mW (EIRP)
5.725 GHz - 5.875 GHz
DSSS
DC 3.3 V, 300 mA
30 mm × 9 mm × 60 mm
(w/h/d)
Output
Frequency band
Modulation method
Power requirements
Dimensions (approx.)
Mass (approx.)
10 g
Design and specifications are subject to change
without notice.
• Standby power consumption 0.3 W (main unit),
0.3 W (subwoofer).
• Over 85% power efficiency of amplifier block is
achieved with the full digital amplifier, S-Master.
GB
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Numerics
G
R
Registered Media Remote
H
A
HDMI
Remote Controller Setting
Reset to Factory Default
I
Initialize Personal Information
Internet Video Parental Control
B
S
BD Hybrid Disc Playback
L
BD/DVD-ROM 1080/24p
M
Media Remote Device
Super Audio CD Playback
Super Audio CD Playback
N
C
Network Connection
O
T
D
TV Screen Size Setting for 3D
P
U
W
E
F
Q
GB
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
The software of this system may be updated in the future. To find out details on any
available updates, please visit the following URL.
For customers in Europe:
For customers in other countries/regions:
(European models only)
(2)
©2011 Sony Corporation
Printed in Malaysia
Download from Www.Somanuals.com. All Manuals Search And Download.
|