PORTABLE TYPE
ROOM AIR CONDITIONER
INSTALLATION AND OPERATION
MANUAL
* Plasmacluster is a trademark of
SHARP Corporation.
* Plasmacluster es una marca reg-
istrada de SHARP Corporation.
ACONDICIONADOR DE AIRE
PARA HABITACIÓN TIPO
PORTÁTIL
MANUAL DE INSTALACIÓN
Y FUNCIONAMIENTO
CV-P12PX
CV-P13PX
CV-PD13PX
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
This manual explains the proper use of your new air conditioner. Please
read this manual carefully before using the product. This manual should
be kept in a safe place for handy reference.
CONTENTS
•FOR CUSTOMER ASSISTANCE (U.S.) .................................E-2
•CONSUMER LIMITED WARRANTY (U.S.) ............................E-3
•PRECAUTIONS ......................................................................E-4
•LOCATION...............................................................................E-6
•INCLUDED...............................................................................E-7
•PART NAMES..........................................................................E-8
•INSTALL WINDOW PANEL......................................................E-10
•INSTALLATION AND REMOVAL OF EXHAUST HOSE .........E-18
•PRE-OPERATION CHECKS ...................................................E-22
•COOL MODE...........................................................................E-24
•DEHUMIDIFICATION MODE...................................................E-24
•FAN MODE ..............................................................................E-25
•VENTILATION MODE..............................................................E-25
•TO CHANGE AIR FLOW DIRECTION.....................................E-26
•PLASMACLUSTER OPERATION............................................E-27
•MEGA COOL OPERATION......................................................E-28
•SLEEP OPERATION................................................................E-28
•TIMER OPERATION................................................................E-29
•MAIN UNIT OPERATION.........................................................E-30
•DRAINAGE ..............................................................................E-30
•MAINTENANCE.......................................................................E-31
•BEFORE CALLING FOR SERVICE ........................................E-32
Declaration of Conformity
SHARP ROOM AIR CONDITIONER CV-P12PX,CV-P13PX,CV-PD13PX
This device complies with Part 18 of FCC rules.
Responsible Party:
SHARP ELECTRONICS CORPORATION.
Sharp Plaza, Mahwah, New Jersey 07430-2135
TEL: 1-800-BE-SHARP
Download from Www.Somanuals.coEm.-A1ll Manuals Search And Download.
(the United States)
FOR CUSTOMER ASSISTANCE
To aid in answering questions if you call for service or for reporting loss or theft, please
record below the model and serial number located on the back side of the unit.
MODEL NUMBER
SERIAL NUMBER
DATE OF PURCHASE
Dealer Name
Address
City
State
Zip
Telephone
TO PHONE: Dial 1-800-BE-SHARP (237-4277) for:
SERVICE (for your nearest Sharp Authorized Servicer)
PARTS (for your Authorized Parts Distributor)
ACCESSORIES
ADDITIONAL CUSTOMER INFORMATION
TO WRITE: For service problems, warranty information, missing items and other assistance:
Sharp Electronics Corporation
Customer Assistance Center
1300 Naperville Drive
Romeoville, IL 60446-1091
TO ACCESS THE INTERNET:
Please provide the following information when you write or call: model number, serial number,
date of purchase, your complete mailing address (including zip code), your daytime telephone
number (including area code) and description of the problem.
Download from Www.Somanuals.coEm.-A2ll Manuals Search And Download.
CONSUMER LIMITED WARRANTY
CONSUMER LIMITED WARRANTY FOR THE U.S. USERS
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product
(the “Product”), when shipped in its original container, will be free from defective workmanship and materials, and
agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or
remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth
below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper
voltage or other misuse, abnormal service or handling, or which has been altered or modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and
provide proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by
law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not
allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those
described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of
Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and
exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described
herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect
to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability
or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product
which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall
Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some
states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you.
THIS WARRANTY GIVES YOU SPECIFlC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY
FROM STATE TO STATE.
Your Product Model Number & Description:
Warranty Period for this Product:
CV-P12PX,CV-P13PX,CV-PD13PX
Portable Air Conditioner. Be sure to have this information available
when you need service for your Product.
One (1) year parts and labor from date of purchase. The warranty
period continues for a total of five (5) years from date of purchase
for the Sealed Cooling System parts; labor and service are not
provided free of change for this additional period.
Appearance items of the Product, filters, or accessories, or any
printed materials.
Additional Item(s) Excluded From Warranty
Coverage (If any):
Product which has been used for rental and/or commercial
purposes.
From a Sharp Authorized Servicer located in the United States.
To find the location of the nearest Sharp Authorized Servicer, call
Sharp Toll Free at 1-800-BE-SHARP.
Where to Obtain Service:
Contact your Sharp Authorized Servicer to obtain in-home service
for this Product.
What to Do to Obtain Service:
The Servicer will come to your home, and if it is necessary to
remove the Product, the Servicer will reinstall it. Be sure to have
Proof of Purchase available.
TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP, OR VISIT OUR WEBSITE AT
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
Download from Www.Somanuals.coEm.-A3ll Manuals Search And Download.
PRECAUTIONS
Points to keep in mind when using your air conditioner.
WARNINGS FOR USE
• Install the air conditioner in accordance with the installation instructions in the latter section of this
manual.
• Do not modify any part of this product.
• Do not insert anything into any part of the unit.
• Ensure the power supply used has an appropriate voltage rating.
Only use a three-pin grounded electrical AC socket rated 125V, 60Hz, and 15 amps
or more as shown on the right.
Use of a power supply with an improper voltage rating can result in damage to the
unit and possibly fire.
• Always use a fuse with the proper amp rating.
Do not, under any circumstances, use wire, pins or other objects in place of a proper fuse.
• In the event of any abnormality with the air conditioner (ex. a burning smell), turn it off immediately
and disconnect the power supply.
WARNING FOR POWER SUPPLY CORD
• This air conditioner uses a plug with a built-in fuse.
Read the precautions on the plug before using the air conditioner.
• Always conduct a “Power Plug Check” before use to confirm the power plug functions normally.
• This power plug must only be plugged into an appropriate wall socket. Do not use in conjunction
with any extension cords.
• Push the power plug securely into the socket and make sure it is not loose.
• Do not pull, deform, or modify the power supply cord, or immerse it in water.
Pulling or misuse of the power supply cord can result in damage to the unit and cause electrical shock.
• A damaged power supply cord must be replaced with a new power supply cord obtained from the
product manufacturer and not repaired. Replacement must be performed by manufacture's service
agent in order to avoid a hazard.
NOTE
Radio or TV Interference
If this room air conditioner should cause interference to radio or television reception, try to correct the interfer-
ence by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the room air conditioner and radio/TV receiver.
• Connect the room air conditioner into an outlet on a circuit different from that to which the radio/TV receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING ABOUT GROUNDING
3-Pin socket
• Improper use of the grounding plug can result
in the risk of electric shock.
This appliance must be grounded. In the event of
Grounded
electrical box
an electrical short circuit, grounding reduces the
risk of an electric shock by providing a less resist-
ant conduit for the electric current.
3-Pin plug
This appliance is equipped with a cord that has a
grounding wire connected to a grounding plug. The
plug must be plugged into a socket that is properly
installed and grounded.
Grounding pin
Grounding adapter
• Do not under any circumstances cut or remove
the round grounding pin from this plug.
Consult a qualified electrician or serviceman if the
grounding instructions are not completely under-
stood, or if in any doubt as to whether the appli-
ance is properly grounded.
Grounding wire
Tab for grounding
screw
Screw
If a grounding adapter is used, make sure the elec-
trical box is fully grounded.
Grounded electrical box
E-4
Download from Www.Somanuals.com. All Manuals Search And Download.
USAGE CAUTIONS
• Ventilate the room periodically during use, especially if using gas appliances.
• Be sure to turn the unit off and disconnect the power supply cord before performing any mainte-
nance or cleaning.
• Do not splash or pour water directly onto the unit.
Water can cause electrical shock or equipment damage.
• Drainage should be performed whenever moving the air conditioner.
If any water remains in the tank, it may spill out while being moved.
• Remove the window panel in the event of particularly adverse weather.
Extremely adverse weather may cause water to leak in through the openings.
• To ensure proper drainage, the drainage hose must have no kinks or be on a different level during
dehumidification mode.
The drained water may spill out into the room.
• The temperature around the drainage hose must not be below freezing point when used.
Drained water may freeze inside the hose, causing water inside the unit to overflow into the room.
• Do not block the exhaust air outlet with obstacles.
Cooling performance may be reduced or stop completely.
NOTES ON OPERATION
• Allow 3 minutes for the compressor to restart cooling.
If you turn the air conditioner off and immediately restart it, allow three minutes for the compressor to restart
cooling. There is an electronic device in the unit that keeps the compressor turned off for three minutes for
safety.
• In the event of a power failure during use, allow 3 minutes before restarting the unit.
After power is reinstated, restart the air conditioner. If the power was off for less than three minutes, be sure
to wait at least three minutes before restarting the unit. If you restart the air conditioner within three minutes,
a protective device in the unit may cause the compressor to shut off. This protective device will prevent cool-
ing for about 5 minutes. Any previous settings will be canceled and the unit will return to its initial settings.
• Low temperature operation: Is your unit freezing up?
Freezing may occur when the unit is set close to 64°F in low ambient temperature conditions, especially at
night.
In these conditions, a further temperature drop may cause the unit to freeze.
Setting the unit to a higher temperature will prevent it from freezing.
• Dehumidification mode increases room temperature.
The unit generates heat during dehumidification mode and the room temperature will rise. Warm air will be
blown out from the Exhaust air outlet, but this is normal and does not indicate a problem with the unit.
• This air conditioner blows the warm air generated by the unit outside the room via the exhaust hose
while in cool mode.
Accordingly, the same amount of air as that blown out will enter the room from outside through any
openings into the room.
• When cooling operation is performed at high humidity conditions, water tank inside the unit may fre-
quently become full.
When water tank inside the unit is full, the unit stops operating and TIMER, OPERATION and MEGA COOL
lamps will blink. In this case, perform drainage to drain out water within the unit.
E-5
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
OPERATING CONDITIONS
• The air conditioner must be operated within the temperature range indicated below.
MODE
Cool
Room temperature
64°F ~ 95°F
Dehumidification
59°F ~ 95°F
• A built-in safety device may cut off operation if the temperature exceeds these limits.
• When cooling operation is performed at high room temperature, the fan may run at a
slower speed.
ENERGY EFFICIENCY TIPS
• Avoid direct sunlight.
Close blinds, drapes or shades to keep out direct sunlight while in cooling mode.
• Keep the filter clean.
Keeping the filter clean greatly aids efficient operation.
A dirty filter blocks the flow of air, making your air conditioner work harder and less effi-
ciently.
• Turn off unnecessary lights.
Your air conditioner must remove the heat produced by your lights or other heat-produc-
ing appliances. Turn off any lights or appliances that are not in use.
• Turn off the air conditioner when no one is home.
Use only when necessary. The less time the air conditioner is used, the lower the run-
ning costs.
LOCATION
• The air conditioner should be placed on a firm foundation to minimize noise and vibration.
For safe and secure positioning, place the unit on a smooth, level floor strong enough to
support the unit.
• The unit has casters to aid placement, but it should only be rolled on smooth, flat sur-
faces. Use caution when rolling on carpet surfaces. Do not attempt to roll the unit over
objects.
• The unit must be placed within reach of a properly rated grounded socket.
• Never place any obstacles around the air inlet or outlet of the unit.
• Allow at least 12" (30cm) of space from the wall for efficient air-conditioning.
MIN.12"
(30cm)
MIN.12"
(30cm)
MIN.12"
(30cm)
Download from Www.Somanuals.coEm.-A6ll Manuals Search And Download.
INCLUDED
CV-P12PX / CV-P13PX
Exhaust hose
Rain deflector
Washer
Bolt
assembly
1
1
1
1
1
1
2
1
1
1
5
2
4
4
4
4
1
1
2
Window exhaust
adapter
Window slider
bracket
Exhaust hose
adapter A
Foam seal A
Nut
Exhaust hose
adapter B
Foam seal B
(adhesive type)
Split-ring
washer
Bracket
Protective
screen
Manual
Window panel
assembly
Large wood
screw
Remote control
3
Screw
Battery
(AAA.1.5V)
CV-PD13PX
Exhaust hose
Rain deflector
Washer
Bolt
assembly
2
2
2
2
1
2
2
1
1
2
5
4
1
8
8
8
8
1
1
2
Window exhaust
adapter
Window slider
bracket
Exhaust hose
adapter A
Foam seal A
Nut
Exhaust hose
adapter B
Foam seal B
(adhesive type)
Split-ring
washer
Bracket
Protective
screen
Manual
Window panel
assembly
Large wood
screw
Remote control
Screw
Baffle
Battery
(AAA.1.5V)
4
The cover and the grille will be installed in the unit before leaving factory.
Cover Grille
1
1
SUGGESTED TOOLS FOR WINDOW PANEL INSTALLATION
1. Screwdriver(medium size Phillips)
2. Tape measure or ruler
3. Knife or scissors
4. Saw (In the event that the window panel needs to be cut down in size because the window is too narrow for
direct installation.)
Download from Www.Somanuals.coEm.-A7ll Manuals Search And Download.
PART NAMES
FRONT VIEW
Air Outlet
1
2
3
4
5
1
2
3
4
5
6
7
8
Vertical louvers
Horizontal louvers
POWER Button
Remote control signal
receiver window
OPERATION Lamp (red)
TIMER Lamp (orange)
6
7
8
MEGA COOL Lamp
(green)
9
0
0
PLASMACLUSTER
Lamp (blue)
9
0
Air inlet
CV-P12PX
CV-P13PX
CV-PD13PX(Single Duct use)
REAR VIEW
Exhaust air outlet
Window exhaust adapter
Exhaust hose adapter A
Exhaust hose
Remote control hook
Air filter
q
w
e
q
w
e
r
t
y
u
i
o
p
a
s
d
f
r
t
y
u
i
o
p
CV-PD13PX(Dual Duct use)
p
Exhaust hose adapter B
Cover
q
w
e
a
Grille
Air inlet
r
y
u
s
d
Drainpipe and stopcock
Power plug
Casters(4)
Baffle
f
a
s
d
NOTE: Actual unit might vary slightly from above illustration.
E-8
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
1
2
Transmitter
1
2
3
4
5
6
7
8
9
0
q
w
e
r
t
Display
POWER Button
LIGHTS Button
TEMPERATURE Button
PLASMACLUSTER Button
SLEEP Button
3
4
5
6
7
8
9
0
q
w
e
r
t
MODE Button
ON TIMER Button
FAN Button
OFF TIMER Button
CANCEL Button
LOUVERS Button
RESET Button
MEGA COOL Button
REMOTE CONTROL DISPLAY
MODE SYMBOLS
y
: COOL
: DEHUMIDIFICATION
: VENTILATION
y
: FAN
u
i
p
a
MEGA COOL SYMBOL
PLASMACLUSTER SYMBOL
FAN SPEED SYMBOLS
u
i
o
: AUTO
: Quiet
s
d
o
: Low
: High
TEMPERATURE AND TIMER COUNT
DOWN INDICATOR
p
TRANSMITTING SYMBOL
ON TIMER / OFF TIMER SYMBOL
SLEEP SYMBOL
a
s
d
Download from Www.Somanuals.coEm.-A9ll Manuals Search And Download.
INSTALL WINDOW PANEL
Installation in a double-hung sash window
(CV-P12PX, CV-P13PX)
1 Cut the foam seal A to the proper length
and attach it to the window stool.
Foam seal A
2 Attach the window exhaust adapter to
the window panel inside opening.
Window panel
Window exhaust adapter
Inside
3 Attach the protective screen to the
outside of the window exhaust adapter.
Use 2 screws to attach the protective
screen onto the outside of the window
exhaust adapter.
4 Install the rain deflector to the outside
of the window panel.
Line up the holes on the rain deflector
and the window panel. Use 4 bolts, 4
washers, 4 split-ring washers and 4 nuts
to attach the rain deflector onto the win-
dow panel.
5 Attach the window panel to the window
stool.
Cut
If the inner width of the window is less than
28" (718mm) wide.
Window panel
(1) Remove the adjustment panel from
the window panel, and cut the window
panel to the same width as the window.
(2) Open the window sash and place the
window panel on the window stool
Window panel
(3) Secure the window panel to the window
stool with 2 large wood screws.
Window stool
E-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjustment panel
If the inner width of the window is between
28" (718mm) and 36.5" (927mm) inclusive.
(1) Open the window sash and place the
window panel on the window stool.
(2) Slide the adjustment panel to fit the
window frame width.
(3) Secure the window panel to the stool
with 3 large wood screws.
28"~36.5"
If the inner width of the window is between
36.5" (927mm) and 64" (1625mm) inclu-
sive.
Window slider bracket
(1) Open the window sash and place the
second window panel on the window
stool.
(2) Slide the adjustment panel to fit the
window frame width.
(3) Secure the window panel to the window
stool with 2 large wood screws.
36.5"~64"
(4) Hook the two window slider brackets
over the bottom edge of the adjustment
panel and attach them to the window
stool using 2 large wood screws.
Foam seal B
6 Cut the foam seal B to the proper length
and attach it to the window panel.
7 Close the window sash securely against
the window panel.
Attach the bracket with a large wood
8 screw.
Bracket
E-11
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALL WINDOW PANEL
Installation in a double-hung sash window
(CV-PD13PX)
1 Cut the foam seal A to the proper length
and attach it to the window stool.
Foam seal A
Window panel
2 Attach 2 window exhaust adapters to
the window panel inside opening.
Inside
Window exhaust adapter
3 Attach 2 protective screens to the
outside of the window exhaust adapter.
Use 4 screws to attach the protective
screens onto the outside of the window
exhaust adapter.
4 Install 2 rain deflectors to the outside of
the window panel.
Line up the holes on the rain deflector
and the window panel. Use 8 bolts, 8
washers, 8 split-ring washers and 8 nuts
to attach the rain deflector onto the win-
dow panel.
5 Attach the window panel to the window
stool.
Cut
If the inner width of the window is less than
28" (718mm) wide.
Window panel
(1) Remove the adjustment panel from
the window panel, and cut the window
panel to the same width as the window.
Window panel
(2) Open the window sash and place the
window panel on the window stool
(3) Secure the window panel to the window
stool with 2 large wood screws.
Window stool
Download from Www.Somanuals.com. EAll-M1an2uals Search And Download.
Adjustment panel
If the inner width of the window is between
28" (718mm) and 36.5" (927mm) inclusive.
(1) Open the window sash and place the
window panel on the window stool.
(2) Slide the adjustment panel to fit the
window frame width.
(3) Secure the window panel to the stool
with 3 large wood screws.
28"~36.5"
If the inner width of the window is between
36.5" (927mm) and 64" (1625mm) inclu-
sive.
Window slider bracket
(1) Open the window sash and place the
second window panel on the window
stool.
(2) Slide the adjustment panel to fit the
window frame width.
(3) Secure the window panel to the window
stool with 2 large wood screws.
36.5"~64"
(4) Hook the two window slider brackets
over the bottom edge of the adjustment
panel and attach them to the window
stool using 2 large wood screws.
Foam seal B
6 Cut the foam seal B to the proper length
and attach it to the window panel.
7 Close the window sash securely against
the window panel.
Attach the bracket with a large wood
8 screw.
Bracket
E-13
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALL WINDOW PANEL
Installation in a sliding sash window
(CV-P12PX, CV-P13PX)
1 Cut the foam seal A to the proper length
and attach it to the window frame.
Foam seal A
2 Attach the window exhaust adapter to
the window panel inside opening.
Window panel
Window exhaust adapter
Inside
3 Attach the protective screen to the
outside of the window exhaust adapter.
Use 2 screws to attach the protective
screen onto the outside of the window
exhaust adapter.
4 Install the rain deflector to the outside
of the window panel.
Line up the holes on the rain deflec-
tor and the window panel. Use 4 bolts,
4 washers, 4 split-ring washers and 4
nuts to attach the rain deflector onto the
window panel.
5 Install the window panel into the window
frame.
Cut
If the inner height of the window is less
than 28" (718mm) high.
Window panel
(1) Remove the adjustment panel from the
window panel, and cut the window pan-
el to the same height as the window.
Window panel
(2) Open the window sash and place the
window panel on the window frame.
(3) Secure the window panel to the window
frame with 2 large wood screws.
Download from Www.Somanuals.cEom-. 1All4Manuals Search And Download.
If the inner height of the window is
between 28" (718mm) and 36.5" (927mm)
inclusive.
Adjustment panel
(1) Open the window sash and place the
window panel on the window frame.
28"~36.5"
(2) Slide the adjustment panel to fit the
window frame height.
(3) Secure the window panel to the window
frame with 3 large wood screws.
If the inner height of the window is be-
tween 36.5" (927mm) and 64" (1625mm)
inclusive.
(1) Open the window sash and place the
window panel on the window frame.
Window slider bracket
36.5"~64"
(2) Slide the adjustment panel to fit the
window frame height.
(3) Secure the window panel to the window
frame with 2 large wood screws.
(4) Hook the two window slider brackets
over the bottom edge of the adjustment
panel and attach them to the window
frame using 2 large wood screws.
Foam seal B
6 Cut the foam seal B to the proper length
and attach it to the window panel.
7 Close the window sash securely against
the window panel.
Attach the bracket with a large wood
8 screw.
Bracket
Download from Www.Somanuals.cEom-. 1All5Manuals Search And Download.
INSTALL WINDOW PANEL
Installation in a sliding sash window
(CV-PD13PX)
1 Cut the foam seal A to the proper length
and attach it to the window frame.
Foam seal A
Window panel
2 Attach 2 window exhaust adapters to
the window panel inside opening.
Window exhaust adapter
3 Attach 2 protective screens to the
outside of the window exhaust adapter.
Use 4 screws to attach the protective
screens onto the outside of the window
exhaust adapter.
4 Install 2 rain deflectors to the outside of
the window panel.
Line up the holes on the rain deflec-
tor and the window panel. Use 8 bolts,
8 washers, 8 split-ring washers and 8
nuts to attach the rain deflector onto the
window panel.
5 Install the window panel into the window
frame.
Cut
If the inner height of the window is less
than 28" (718mm) high.
Window panel
Window panel
(1) Remove the adjustment panel from the
window panel, and cut the window pan-
el to the same height as the window.
(2) Open the window sash and place the
window panel on the window frame.
(3) Secure the window panel to the window
frame with 2 large wood screws.
Download from Www.Somanuals.com. EAll-M1an6uals Search And Download.
If the inner height of the window is
between 28" (718mm) and 36.5" (927mm)
inclusive.
Adjustment panel
(1) Open the window sash and place the
window panel on the window frame.
28"~36.5"
(2) Slide the adjustment panel to fit the
window frame height.
(3) Secure the window panel to the window
frame with 3 large wood screws.
If the inner height of the window is be-
tween 36.5" (927mm) and 64" (1625mm)
inclusive.
(1) Open the window sash and place the
window panel on the window frame.
Window slider bracket
36.5"~64"
(2) Slide the adjustment panel to fit the
window frame height.
(3) Secure the window panel to the window
frame with 2 large wood screws.
(4) Hook the two window slider brackets
over the bottom edge of the adjustment
panel and attach them to the window
frame using 2 large wood screws.
Foam seal B
6 Cut the foam seal B to the proper length
and attach it to the window panel.
7 Close the window sash securely against
the window panel.
Attach the bracket with a large wood
8 screw.
Bracket
E-17
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION AND REMOVAL OF EXHAUST HOSE
Installation of the exhaust hose
(CV-P12PX, CV-P13PX)
1 Attach the exhaust hose adapters A
and B to the exhaust hose.
Extend both ends of the exhaust hose
and insert them into the exhaust hose
adapters A and B respectively, and turn
them until they stop. Make sure they are
securely attached.
Exhaust hose
adapter A
Exhaust hose
Exhaust hose adapter B
2 Attach the exhaust hose adapter B to
the unit.
Insert the two projections on the exhaust
hose adapter B into the two holes on
the unit, and firmly attach them to each
other.
Projection
Hole
Attach the exhaust hose.
3
Insert the exhaust hose adapter A to the
window exhaust adapter in the window
panel and turn it to lock it in place.
Window exhaust
adapter
Exhaust hose adapter A
The exhaust hose should be as short as possible for operational efficiency; however,
it must not be twisted or bent.
Acceptable
Acceptable
Unacceptable
Download from Www.Somanuals.cEom-.1Al8l Manuals Search And Download.
Installation of the exhaust hose
(CV-PD13PX)
1 Attach the exhaust hose adapters A
and B to the exhaust hoses.
Extend both ends of the exhaust hose
and insert them into the exhaust hose
adapters A and B respectively, and turn
them until they stop. Attach the other
exhaust hose adapters A and B to the
exhaust hose in the same way. Make
sure they are securely attached.
Exhaust hose
adapter A
Exhaust hose
Exhaust hose adapter B
Cover
2 Attach the exhaust hose adapters B
to the unit.
Remove the cover from the unit by
pushing down the two projections on it.
Projection
Hole
Insert the two projections on the exhaust
hose adapter B into the two holes on
the unit, and firmly attach them to each
other. Attach the other exhaust hose
adapter B to the unit in the same way.
Projection
Hole
Attach the exhaust hoses.
3
Window exhaust
adapter
Insert the exhaust hose adapter A to the
window exhaust adapter in the window
panel and turn it to lock it in place.
Attach the other exhaust hose in the
same way.
Exhaust hose adapter A
4 Attach the baffle to the back plate of
the unit.
Open the grille and remove it. Insert
the 2 projections on the baffle into the 2
holes on the back plate of the unit, and
close the baffle.
Baffle
Hole
Projection
Grille
Download from Www.Somanuals.cEom-.1Al9l Manuals Search And Download.
INSTALLATION AND REMOVAL OF EXHAUST HOSE
NOTICE:
If the dual-duct type unit is used as single-duct type one, please refer to the follow-
ing instructions:
1 Attach the grille and the cover to the
unit.
Open the baffle and remove it. Insert
the 2 projections on the grille into the 2
holes on the back plate of the unit, and
close the grille.
Cover
Projection
Grille
Insert the two projections on the cover
into the two holes on the unit,
Hole
Projection
Baffle
2 Install one exhaust hose.
Download from Www.Somanuals.com.EAll-M2a0nuals Search And Download.
Removal of the exhaust hose
Remove the exhaust hose adapter A.
Remove the exhaust hose adapter A
from the window exhaust adapter.
1
Exhaust hose
adapter A
Window exhaust
adapter
2 Remove the exhaust hose adapter
from the unit.
Lift up and remove the exhaust hose
adapter from the unit by pushing down
on the two projections.
Projection
E-21
Download from Www.Somanuals.com. All Manuals Search And Download.
PRE-OPERATION CHECKS
POWER PLUG CHECK
This air conditioner uses a fused power plug.
Always check the power plug before use.
1 Press the RESET button.
socket.
Press the TEST button.
2 Insert the power plug into the wall
3
You will hear a CLICK if the circuit
breaker is functioning correctly.
TEST
4 Press the RESET button until you
hear another CLICK.
RESET
The circuit breaker is activated, power
is supplied, and the air conditioner is
now ready for use.
Do not attempt to use the air conditioner if the above procedure
cannot be performed.
Disconnect the power plug and call for service.
Use two AAA (R03) batteries.
LOADING BATTERIES
1 Remove the battery cover at the
2 Insert batteries into the com-
aligned.
back of the remote control.
partment, making sure the
±
and
polarities are correctly
—
• Lines will appear on the display
when batteries are properly in-
stalled.
Reattach the battery cover.
Battery cover
3
4 Press the RESET button using
NOTES:
a thin pointed implement.
• The battery should last approximately one year under normal use.
• When replacing the batteries, always change both batteries at the same time,
and make sure they are the same type.
• If the remote control does not operate normally after replacing the batteries,
press the RESET button using a thin pointed implement.
• If you will not be using the unit for a prolonged period, remove the batteries from
the remote control.
Download from Www.Somanuals.cEom-.2All2Manuals Search And Download.
HOW TO USE THE REMOTE CONTROL
Point the remote control towards
the units signal receiver window
and press the desired button.
A
beep will sound when the unit re-
ceives the signal.
• Make sure nothing, such as curtains,
blocks the signal receiver window.
• The remote control operates up to
23 feet (7 meters) away.
CAUTION
• Do not expose the signal receiver window to direct sunlight. This may adversely
affect its operation. If necessary, close the curtains to block out the sunlight.
• Use of a fluorescent lamp in the same room may interfere with transmission of the
signal.
• The unit may be affected by signals emitted from other remote controllers for tel-
evisions, VCRs or other equipment used in the same room.
• Do not leave the remote control exposed to direct sunlight or near a heater. Pro-
tect the remote control from moisture and shock which can discolor or damage it.
To prevent the remote control from
being misplaced, hook it to the unit
when not in use.
When attached, to remove the remote
control from the unit, lift the remote
control up slightly and pull it out.
Remote control hook
E-23
Download from Www.Somanuals.com. All Manuals Search And Download.
COOL MODE
Ensure that the stopcock is securely attached the
drainpipe.
Stopcock
Drainpipe
Press the MODE button to select COOL
mode.
1
COOL
DEHUM
FAN
VENT
2Press the POWER button to start opera-
tion.
• The red OPERATION lamp on the unit will light.
2
3
3Press the TEMPERATURE button to set
the desired temperature.
• The temperature can be set within the range of
64°F to 86°F.
1
4
4Press the FAN button to set the desired
fan speed.
AUTO
QUIET
LOW
HIGH
TO TURN OFF
Press the POWER button again.
• The red OPERATION lamp on the unit will turn off.
DEHUMIDIFICATION MODE
In this mode, the air conditioner dehumidifies the room.
Ensure that the stopcock is securely attached the drainpipe.
1Press the MODE button to select DEHU-
MIDIFICATION mode.
DEHUM
COOL
FAN
VENT
2
1
Press the power button to start operation.
• The red OPERATION lamp on the unit will light.
• The temperature cannot be set.
• The fan speed is preset to AUTO and cannot be
changed.
2
TO TURN OFF
Press the POWER button again.
• The red OPERATION lamp on the unit will turn off.
E-24
Download from Www.Somanuals.com. All Manuals Search And Download.
FAN MODE
In this mode, the air conditioner simply circulates the air without cooling it.
Ensure that the stopcock is securely attached the drainpipe.
1 Press the MODE button to select FAN mode.
COOL DEHUM
FAN
VENT
2
Press the POWER button to start operation.
• The red OPERATION lamp on the unit will light.
• The temperature cannot be set.
2
3 Press the FAN button to set the desired fan
speed.
QUIET
LOW
HIGH
1
3
TO TURN OFF
Press the POWER button again.
• The red OPERATION lamp on the unit will turn off.
VENTILATION MODE
In this mode, the air conditioner ventilates the air to outdoors.
Ensure that the stopcock is securely attached the drainpipe.
1 Press the MODE button to select VENT mode.
COOL
DEHUM
FAN
VENT
Press the POWER button to start operation.
• The red OPERATION lamp on the unit will light.
• The temperature cannot be set.
2
2
3 Press the FAN button to set the desired fan
speed.
• Although the louvers are closed and no air blows
out into the room, the external ventilation fan
speed changes.
1
3
QUIET
LOW
HIGH
TO TURN OFF
Press the POWER button again.
• The red OPERATION lamp on the unit will turn off.
E-25
Download from Www.Somanuals.com. All Manuals Search And Download.
TO CHANGE AIR FLOW DIRECTION
UP / DOWN AIR FLOW DIRECTION
1 Press the LOUVERS button on the re-
mote control.
• The horizontal louvers will swing continu-
ously.
2 Press the LOUVERS button again when
the horizontal louvers are at the desired
position.
• The horizontal louvers will stop moving.
• The adjusted position will be memorized and
the same position will be set automatically
when operated the next time.
1
2
NOTE
• During VENTILATION mode, UP/DOWN air flow
direction cannot be changed.
Horizontal louvers
LEFT / RIGHT AIR FLOW DIRECTION
Hold the vertical louver as shown in the dia-
gram and adjust the air flow direction.
Vertical louvers
CAUTION
Never attempt to adjust the horizontal louvers manually.
• Manual adjustment of the horizontal louvers can cause the unit to malfunction when the remote
control is used for adjustment.
• When the horizontal louvers are positioned at the lowest position in the COOL or DEHUMIDIFI-
CATION mode for an extended period of time, condensation may result.
Do not adjust the vertical louvers to the extreme left or right in the COOL mode with the
fan speed set to "QUIET ( )" for an extended period of time.
Condensation may form on the louvers.
Download from Www.Somanuals.cEom-. 2All6Manuals Search And Download.
PLASMACLUSTER OPERATION
Plasmacluster ions released into the room will reduce some airborne mold.
1Press the PLASMACLUSTER button during
operation.
• The remote control will display “
”.
• The blue PLASMACLUSTER lamp on the unit will
light.
TO CANCEL
Press the PLASMACLUSTER button again.
• The PLASMACLUSTER lamp on the unit will turn
off.
1
NOTES:
• Use of the PLASMACLUSTER function will be
memorized and it will be activated the next time you
turn on the air conditioner.
• To turn off the PLASMACLUSTER Lamp, press the
LIGHTS button.
• PLASMACLUSTER operation cannot be set during
VENTILATION mode.
E-27
Download from Www.Somanuals.com. All Manuals Search And Download.
MEGA COOL OPERATION
In this operation, the air conditioner fan works at extra high speed with a setting
temperature of 59°F.
Press the MEGA COOL button during cooling
mode.
1
• The remote control will display "
• The temperature display will go off.
• The green MEGA COOL lamp on the unit will light.
" .
TO CANCEL
Press the MEGA COOL button again.
• MEGA COOL operation is also cancelled when the
mode is changed, or when the unit is turned off.
1
• The green MEGA COOL lamp on the unit will turn
off.
NOTES:
• You cannot set the temperature or fan speed during MEGA COOL operation.
• The fan returns to the HIGH speed setting after the unit has run for 30 minutes in MEGA
COOL mode.
• The extra high fan speed may automatically slow down to protect the unit.
SLEEP OPERATION
When SLEEP operation is set, the temperature setting is automatically adjusted to
prevent the room from becoming too cold.
1 Press the SLEEP button during cooling
mode.
• The remote control displays “
”.
• The orange TIMER lamp on the unit will light.
• The unit will stop operating after 8 hours.
• The fan speed setting is set to AUTO.
TO CANCEL
Press the SLEEP button.
• The orange TIMER lamp on the unit will turn off.
1
• SLEEP operation is also cancelled when the mode
is changed, or when the unit is turned off.
NOTES:
• One hour after the SLEEP operation is started, the
temperature setting rises by 2˚F and after another
hour it rises by an additional 2˚F. Temperature display
on the remote control will not change from its original
setting.
8hours
1hour 1hour
2˚F
• SLEEP operation and MEGA COOL operation can
not be used together.
2˚F
• The OFF TIMER, ON TIMER and SLEEP operation
can not be set together.
Only the most recent settings will be used.
Start of
SLEEP operation
Unit shuts off
Download from Www.Somanuals.cEom-.2All8Manuals Search And Download.
TIMER OPERATION
ON TIMER
Press the ON TIMER button.
1
• The time setting will change as you press the button
as follows. Hold the button down to speed through the
settings.
0.5h
1.0h
1.5h
10h
11h
12h
• The orange TIMER lamp on the unit will light.
• The time setting will count down to show the remaining
time.
Select the mode, temperature, fan speed setting and
PLASMACLUSTER operation as desired.
• When the temperature is set with the ON TIMER, the
temperature will show in the display for 5 seconds and
then return to the time display.
• If you do not change the setting, the unit will operate us-
ing the most recent setting.
1
CANCEL
TO CANCEL TIMER
Press the CANCEL button.
• The orange TIMER lamp on the unit will turn off.
OFF TIMER
Press the OFF TIMER button and set the time
as desired.
• The time setting will change as you press the button
as follows. Hold the button down to speed through
the settings.
1
0.5h
1.0h
1.5h
10h
11h
12h
• The orange TIMER lamp on the unit will light.
• The time setting will count down to show the remain-
ing time.
TO CANCEL TIMER
Press the CANCEL button.
• The orange TIMER lamp on the unit will turn off.
1
CANCEL
NOTES
•
Timer duration can be set from a minimum of half an hour to a maximum of 12 hours.
Up to 9.5 hours, you can set in half-hour increments and from 10 to 12 hours, in 1-hour increments.
The latest time setting will be memorized and will appear on the remote control display the next time you
set the OFF TIMER or ON TIMER.
•
•
•
The OFF TIMER and ON TIMER can not be set together.
Only the most recent TIMER setting will be valid.
If a power failure occurs while the OFF TIMER or ON TIMER is set, the TIMER setting will be cancelled and
will not be retrieved even after the power is restored.
E-29
Download from Www.Somanuals.com. All Manuals Search And Download.
MAIN UNIT OPERATION
Use this mode when the remote control is not available.
Press the POWER button on the unit.
• The red OPERATION lamp on the unit will
light.
• If the unit has not been unplugged since it
was last operated, it will resume operation at
its last settings.
1
1
• If the unit has been unplugged since it was
last operated, it will resume operation in the
cooling mode, set at 68˚F. The fan speed set
to AUTO.
TO TURN OFF
Press the POWER button again.
• The red OPERATION lamp on the unit will turn
off.
DRAINAGE
Prepare for drainage and drain out water within the unit in the following cases.
• When the unit stops operating and the TIMER, OPERATION and MEGA COOL lamps are
blinking, the water tank is full and need to be drained.
• When the unit is not used for a long time.
1 Unplug the power plug and move the unit to a
2 Remove the stopcock from the drainpipe, and
drain or outside.
drain water within the unit.
Stopcock
3 Replace the stopcock to the drainpipe.
Drainpipe
Download from Www.Somanuals.cEom-. 3All0Manuals Search And Download.
MAINTENANCE
Be sure to disconnect the power from the wall socket before performing any mainte-
nance.
CLEANING THE FILTER
If the filter is clogged with dust, the airflow will be reduced, resulting in poor cooling
performance. The filter should be cleaned every two weeks.
AIR FILTER
REMOVE THE FILTER
• Gently pull the filter handle to the right and
slide the filter out of the unit.
1
Air filter
CLEAN THE FILTER
• Use a vacuum cleaner to remove any dust. If
the filter is very dirty, wash it with detergent
and rinse carefully with clean water. Dry the
filter in the shade before reinstalling them.
2
Air inlet filter
REINSTALL THE FILTER
• Hold the filter handle and gently push the filter
back into place.
Never operate the unit without the filter. Doing
so may result in serious damage to the unit.
3
Grille
AIR INLET FILTER (For single-duct type)
Remove the grille and clean the air inlet filter
with a vacuum cleaner.
CLEANING THE UNIT AND THE REMOTE CONTROL
Wipe them with a soft, dry cloth or with a cloth moistened with a mild soap. Carefully remove
any residue by wiping with a damp cloth and dry completely.
Avoid splashing water onto the unit. Water can dangerously damage the electrical insulation.
Never use harsh chemicals or abrasive cleaners on any part of the unit. To avoid damaging
the unit, do not use hot water (120°F/50°C or hotter) when cleaning.
MAINTENANCE AFTER AIR CONDITIONER SEASON
Perform drainage to drain out water within the unit.
1
2
3
Operate the unit in the FAN or VENTILATION mode for about half a day to
thoroughly dry inside the unit.
Clean the filters, then reinstall them.
E-31
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE CALLING FOR SERVICE
If the unit appears to be malfunctioning, check the following points before calling
for a service.
AIR CONDITIONER DOES NOT OPERATE AT ALL
• Is the unit plugged in or is the plug loose?
• Has the fuse blown or is the circuit breaker tripped?
• Did you restart the unit within 3 minutes of a power failure?
If the power was off for less than 3 minutes when, you restarted the air conditioner, a protective
device may cause the compressor to shut off, preventing cooling for about 5 minutes.
• Are the OPERATION, TIMER and MEGA COOL lamps blinking?
The water tank inside the unit is full. It must be drained. (See page 30)
• Check the power plug. (See page 22)
AIR CONDITIONER DOES NOT COOL PROPERLY
• Is it set to FAN, DEHUMIDIFICATION or VENTILATION mode?
Cooling does not take place in these modes. Change the MODE setting.
• Is the filter clogged with dust?
Clean the filter.
• Is the cooling coil frozen?
No air will blow out if the cooling coil is frozen.
Run the air conditioner in FAN mode with the fan speed set to "HIGH" until all ice dissipates.
• Is the temperature set properly?
• Is the window exposed to direct sunlight?
Close the curtains or blinds to minimize solar energy heating the room.
• Is the exhaust hose too long?
For efficient operation, make the hose as short as possible. The exhaust hose must not be twisted
or bent.
SOUNDS
• The unit may seem rather loud for the first 2 to 3 minutes when the unit is turned on. This is the
sound of the compressor starting-up and is perfectly normal.
• A soft, swishing noise can be heard immediately after the unit is turned on or off, and also during
operation. This is the sound of the refrigerant flowing inside the unit.
• A low buzzing noise is emitted when the unit is generating Plasmacluster ions.
• This air conditioner evaporates water condensed during cooling operation within the unit through
the exhaust air outlet. Although water flowing sound way be heard, this is normal.
• An audible gurgling sound may be heard when the unit is operated on a gently sloping
floor. Place the unit on a level floor.
TIMER DOES NOT WORK PROPERLY
• If a power failure occurs while the TIMER is set, the TIMER setting will be cancelled and will not
be retrieved even after the power is restored. This is normal for this unit.
THE UNIT FAILS TO REACT TO THE REMOTE CONTROL SIGNAL
• Check the batteries in the remote control. Replace if necessary.
• Try to send the signal again with the remote control pointed directly at the unit’s signal receiver
window.
• Check whether the remote control batteries are installed with the polarities properly aligned.
THE DISCHARGED AIR HAS AN ODOR
• Plasmacluster ion generator emit small traces of ozone which may produce an odor. These
ozone emissions are below safety levels.
E-32
Download from Www.Somanuals.com. All Manuals Search And Download.
|