Socket Mobile Network Card Bluetooth Connection Kit User Manual

Bluetooth™ Connection Kit  
Featuring the Socket Bluetooth Card™ and  
Windows CE software for adding Bluetooth wireless  
connectivity to the following mobile computers:  
Pocket PC 2000s  
Pocket PC 2002s  
Handheld PC 2000s  
User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SDIO Card  
62  
63  
67  
APPENDIX B SAFETY AND USAGE TIPS  
APPENDIX C TROUBLESHOOTING  
APPENDIX D SUPPORT RESOURCES  
Users’ Forum  
70  
70  
Technical Support  
70  
LIMITED WARRANTY  
COPYRIGHT NOTICE  
71  
73  
REGULATORY COMPLIANCE  
CompactFlash Card  
74  
74  
SDIO Card  
77  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1 Introduction  
Overview  
The Socket Bluetooth Connection Kit for Windows CE makes it easy to add  
Bluetooth wireless connectivity to a Pocket PC 2000, Pocket PC 2002 or  
HPC 2000. It’s perfect for connecting any of these mobile computers  
wirelessly to your favorite Bluetooth phone, LAN access point, computer or  
printer.  
The Bluetooth Card is the only plug-in card to incorporate all Bluetooth  
components within the CompactFlash Type I or SDIO form factor.  
For people using notebook computers running  
Windows 98SE, Me, 2000 or XP, Socket offers two  
options. The Bluetooth Connection Kit and Adapter  
package includes a Bluetooth Card, CF-to-PC Card  
adapter plus software support for both notebook  
computers and Windows CE-based devices. The  
package is available online at:  
www.esend.com/socket/product.asp?sku=BL4517%  
2D386&mscssid=4MM2VU1BLJGS9LMAT74D3  
C3SJXGEF1C7www%2Eesend%2Ecom%2Fsocket  
%2Fproduct%2Easp%3Fsku%3DAC4000%2D978  
For users who already own the Bluetooth Connection Kit for Windows CE,  
the Windows Upgrade Kit comes with a CF-to-PC Card adapter and software  
for Windows notebooks. You can purchase the upgrade kit separately online  
at:  
VU1BLJGS9LMAT74D3C3SJXGEF1C7  
The Bluetooth Connection Kit includes a Bluetooth  
Card and Bluetooth software, including drivers, the  
Bluetooth Setup Wizard, the Get Connected! Wizard,  
the Bluetooth Devices folder, Socket OBEX and the  
Socket Dialer.  
For quickly connecting your mobile computer to a  
Bluetooth phone, use the Get Connected! Wizard.  
Afterwards, you can use the Socket Dialer to directly  
dial a number from your Contacts list.  
In addition to phones, Socket’s Bluetooth software also makes it easy to  
connect to devices like computers, access points, and printers. The  
4 | CHAPTER 1: INTRODUCTION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Bluetooth ActiveSync option guides you through connecting and  
synchronizing with a computer. Similarly, the Bluetooth LAN Access option  
helps you connect to a LAN access point. To connect to a printer or other  
type of device, use the advanced features found in the Bluetooth Devices  
folder.  
The Transfer via Bluetooth option enables you to exchange business cards  
and files with another Bluetooth device that supports OBEX. You can even  
use one mobile computer to browse the contents of another.  
This User’s Guide explains how to install and use the Bluetooth Card.  
This guide shows Pocket PC 2000 and Pocket PC 2002 screens. Except  
where otherwise noted, other types of mobile computers will have  
functionally equivalent screens. The term “Pocket PCs ” refers to both  
Pocket PC 2000s and Pocket PC 2002s.  
Contents of the Connection Kit  
The Socket Bluetooth Connection Kit includes these items:  
A Socket Bluetooth Card (CompactFlash card Type I or SDIO)  
The Socket Bluetooth Connection Kit Installation CD  
To register the kit online, visit: www.socketcom.com/product/prodreg.asp  
CHAPTER 1: INTRODUCTION | 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation Steps Summary  
Basic installation and operation of the Bluetooth Card for use with a  
Bluetooth phone can be completed in seven steps.  
BASIC SETUP AND USE WITH A BLUETOOTH PHONE  
STEP 1: Register the card.  
STEP 2: Prepare network information.  
STEP 3: Install the software.  
STEP 4: Complete the Socket Bluetooth Setup Wizard.  
STEP 5: Insert the Bluetooth Card into your mobile computer.  
STEP 6: Get Connected!  
STEP 7: Dial-up to your network.  
FEATURES  
Turn transmitter ON/OFF  
Bluetooth ActiveSync  
Bluetooth LAN Access  
ADVANCED FEATURES  
Set up your Bluetooth Card.  
Use the Bluetooth Devices folder.  
-
-
-
-
-
-
-
View device properties.  
Set up your favorite devices.  
View/modify Bluetooth COM ports.  
Discover other Bluetooth device(s).  
Bond with another Bluetooth device.  
Change views.  
Delete a device from your folder.  
OBEX  
Exchange business cards  
Send a contact  
Send a file  
Browse remote device  
Receive contact or file  
Enable file sharing  
SOCKET DIALER  
BLUETOOTH PRINTING  
Note: There are some important safety and usage guidelines you should  
read before operating the Bluetooth Card. Please refer to Appendix B,  
“Safety and Usage Tips.”  
6 | CHAPTER 1: INTRODUCTION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2 Basic Setup  
This chapter covers the minimum steps you must complete to install and use  
the Bluetooth Card.  
STEP 1: Register the Card  
Register the card online at: www.socketcom.com/prodreg/  
STEP 2: Prepare Network Information  
Consult with your network administrator/MIS technician to obtain any  
necessary settings for your network (e.g. IP addresses, dial-up number, user  
name, password, etc.).  
STEP 3: Install the Software  
Follow these steps to install the software BEFORE inserting the Bluetooth  
Card.  
1. Make an active connection between the mobile computer and a host PC.  
An active connection exists if data can move between the host PC and  
mobile computer via a serial/USB/Ethernet connection cable or cradle.  
2. Insert the Bluetooth Connection Kit Installation CD into the host PC.  
3. Use My Computer or Windows Explorer to access your CD-ROM drive.  
In the CD, click on SETUP.EXE  
4. Follow the instructions on your host computer and mobile computer  
screens to install the software.  
CHAPTER 2: BASIC SETUP | 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
STEP 4: Complete the Bluetooth Setup Wizard  
1. After you install the software, the Socket Bluetooth Setup Wizard will  
automatically launch on your mobile computer. Tap Next>.  
2. Give your mobile computer a friendly name. Tap Next>.  
8 | CHAPTER 2: BASIC SETUP  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. If your mobile computer has fewer than 6 COM ports free, the Disable  
IrDA? Screen will appear. If desired, disable IrDA to free more ports.  
Tap Next>.  
Note: This will disable the IR port on a Pocket PC. To readjust the  
IrDA settings, go to Start | Settings | System| IrDA. Some devices do not  
allow you to disable IrDA.  
4. If your mobile computer still has fewer than 6 COM ports free, the next  
screen will allow you to choose which services you plan to use most.  
After making your selections, tap Next>.  
Note: You cannot disable the Bluetooth Phone port.  
5. In the last screen, tap Finish.  
6. If you disabled IrDA while using the wizard, soft reset your mobile  
computer by pressing the reset button. This is necessary for changes to  
take effect.  
CHAPTER 2: BASIC SETUP | 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
STEP 5: Insert the Card  
Important!  
Do NOT insert the card upside down or shove the card in too hard.  
Damage may occur!  
Insert the card into your mobile computer’s slot. Make sure the card is right-  
side up.  
Insert a CompactFlash or SDIO card directly into a slot of its size.  
If using a PC Card slot, first insert the Bluetooth CF Card into a  
CompactFlash-to-PC Card adapter (available separately).  
Insert the card  
directly into a  
slot of its size…  
…or plug the CF card  
into an adapter for use in  
a PC Card slot.  
When properly inserted, the CF card unit will be fully contained within the  
slot. The SDIO card will jut out a little from the slot.  
After the mobile computer recognizes the card, the Bluetooth icon  
appear in the task tray (visible in the Today screen for Pocket PCs).  
will  
10 | CHAPTER 2: BASIC SETUP  
Download from Www.Somanuals.com. All Manuals Search And Download.  
STEP 6: Get Connected!  
The Get Connected! Wizard guides you through a one-time setup process  
that prepares the mobile computer and phone for Bluetooth connections.  
The wizard varies depending on what phone you want to connect to.  
Ericsson, Nokia 6210, NTT DoCoMo, Sony Phones  
1. Tap on the Bluetooth task tray icon (visible from the Today screen for  
Pocket PCs). In the pop-up menu, select Get Connected!  
2. Follow the Bluetooth “Get Connected!” Wizard. In the second screen, use  
the drop-down list to select your Bluetooth phone. The wizard will  
provide tailored instructions based on your selection.  
This example is  
for a Nokia phone.  
Your phone may  
differ.  
3. Follow the next screen(s) to prepare your specific phone for Bluetooth  
connections. You may need to do 1, 2 or all of the following steps:  
a. Naming your Bluetooth phone  
b. Setting your Bluetooth phone in Discoverable mode  
c. Preparing your Bluetooth passkey  
CHAPTER 2: BASIC SETUP | 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. When the search is complete, a list of the discovered Bluetooth phones  
will appear. Choose the phone you wish to connect to, and tap Select.  
A service discovery phase will begin, about 5-10 seconds.  
5. As prompted in the next screen, prepare your phone for bonding. For  
instructions on setting your phone to “Bondable” or “Pairable” mode,  
refer to your phone manual. Have your passkey ready, then tap Next>.  
6. In the next screen, enter the passkey. Tap Reply.  
Note: Exchanging passkeys allows the phone and mobile computer to set  
up an encrypted data link for secure communications.  
7. The mobile phone may then either automatically accept the passkey or  
ask you to enter one. If prompted for a passkey, use the same one you  
entered on the mobile computer.  
Ericsson T68/T68i only: When the phone asks you if you want to bond ,  
select 2: Add to paired devices. Do not ACCEPT.  
8. Tap Finish. After successfully connecting, the phone will appear in the  
Bluetooth Devices folder. You will not need to run the Get Connected!  
Wizard again unless you plan to switch between different phones.  
Note: You may also switch between different phones by assigning a new  
“favorite phone” in the Bluetooth Devices folder.  
12 | CHAPTER 2: BASIC SETUP  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Motorola Timeport 270C, Nokia 6310  
1. Tap on the Bluetooth task tray icon  
(visible from the Today screen  
for Pocket PC devices). In the pop-up menu, select Get Connected!  
2. Follow the Bluetooth “Get Connected!” Wizard. In the second screen, use  
the drop-down list to select your Bluetooth phone. The wizard will  
provide tailored instructions for your phone.  
Note: The screens below are for the Motorola Timeport 270C.  
3. As directed in the next two screens, assign the phone a unique name and  
set the phone in Discoverable mode. Then tap Next>.  
4. The mobile computer will begin to search for the phone. When the  
search is over, a list of the discovered Bluetooth phones will appear.  
Choose the phone you wish to connect to, and tap Select. A service  
discovery phase will begin, about 5-10 seconds.  
CHAPTER 2: BASIC SETUP | 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. The next two screens describe procedures you can only complete outside  
of the wizard. Read through each screen but do not complete the  
described procedures until you exit the wizard. Directions for these  
procedures are provided in STEP 7: Dial-up to Your Network, starting  
on the next page. The two procedures are:  
Bonding with your phone — This must be completed in order to  
complete the Bluetooth connection and involves dial-up networking.  
Automatic Connections — This procedure is optional but will make  
future Bluetooth connections more convenient.  
6. Continue to the last screen of the wizard and tap Finish. Now proceed to  
STEP 6 to complete the bonding process and, if desired, set up automatic  
connections.  
14 | CHAPTER 2: BASIC SETUP  
Download from Www.Somanuals.com. All Manuals Search And Download.  
STEP 7: Dial-up to Your Network  
Complete the following steps to create a new Bluetooth connection. Before  
setting up dial-up networking, prepare yourself with dial-up information and  
other necessary settings for your office network or ISP.  
Pocket PCs  
This section pertains to Pocket PC 2000s and Pocket PC 2002s.  
1. Pocket PC 2000 — Go to Start | Settings | Connections | Modem. In the  
next screen, tap New Connection…  
Pocket PC 2002 — Go to Start | Settings | Connections. Tap on the  
Connections icon. In the top field, select Internet Settings. Tap Modify…  
In the next screen, tap New…  
CHAPTER 2: BASIC SETUP | 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. In the next screen, enter a name for the dial-up connection. For the  
modem, select Bluetooth Phone. For the Baud Rate, select 115200.  
Tap Advanced…  
Note: Remember what you name the connection. You will need it when  
you start the connection.  
3. The Port Settings screen will appear.  
If needed, tap on the TCP/IP and/or Name Servers screens to enter any  
necessary settings for your office network or ISP. Tap ok.  
4. Tap Next.  
5. In the Phone number field, enter the dial-up number. Tap Next.  
6. Uncheck Wait for dial tone before dialing. Tap Finish.  
16 | CHAPTER 2: BASIC SETUP  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. Now you are ready to start the connection.  
Pocket PC 2000 — Go to Start | Programs | Connections. Tap on the  
Bluetooth connection you just set up. Make sure the dialing settings are  
correct. Tap Connect.  
Pocket PC 2002 — In the Connections screen, under Internet Settings,  
tap Connect. In Network Log On, verify the dialing settings. Tap OK.  
8. FOR MOTOROLA TIMEPORT 270C AND NOKIA 6310 ONLY:  
After you tap Connect for the first time, the phone will display a message  
asking if you want to bond. On Motorola, enter GRANT; on Nokia, enter  
ACCEPT. Make up a 4-16 digit passkey, enter it on the phone, then enter  
it on the Pocket PC. After successfully bonding, you can set up the  
phone for automatic connections.  
Automatic Connections for Motorola Timeport 270C:  
On the phone, press MENU.  
Scroll to Settings, then press SELECT.  
Scroll to Connection, then press ON.  
On Bluetooth Link, press SELECT.  
Scroll to Devices, then press SELECT.  
Choose your mobile computer, then press EDIT.  
Scroll to Access:Ask, then press CHANGE.  
Scroll to Automatic, then press SELECT. Press DONE.  
Automatic Connections for Nokia 6310:  
On the phone, press MENU.  
Scroll to 10 Bluetooth, then press SELECT.  
Scroll to 4 View Paired Devices, then press SELECT.  
Highlight the Pocket PC, then press OPTIONS.  
Scroll to 3 Request Connection Authorization, then press NO.  
9. To use a different Bluetooth phone for dial-up networking, you can use  
the same connection setup, but you must make the new phone your  
favorite. Just run the Get Connected! Wizard again, select the new phone,  
and make it your new Favorite when prompted. Or you can use the  
Bluetooth Devices folder to change your favorite phone (see page 37).  
CHAPTER 2: BASIC SETUP | 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Handheld PC 2000  
1. Go to Start | Programs | Communication |  
Remote Networking | Make New Connection.  
2. In the next screen, enter a name for the Bluetooth connection.  
Select Dial-Up Connection. Tap Next>.  
2. Select Bluetooth Phone for the modem. Tap Configure…  
3. The Port Settings screen will appear.  
For Baud Rate, select 115200. Tap on the Call Options tab.  
5. Uncheck Wait for dial tone before dialing. Tap OK.  
18 | CHAPTER 2: BASIC SETUP  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. If needed, tap on TCP/IP to enter any special network settings for your  
office network or ISP. Tap OK. In the next screen, tap Next>. Enter the  
dial-up number for your office network or ISP. Tap Finish.  
7. Now you are ready to start the connection.  
Go to Start | Programs | Communication | Remote Networking. Tap on  
your new Bluetooth connection. Enter the correct User Name and  
Password. Tap Connect.  
8. FOR MOTOROLA TIMEPORT 270C AND NOKIA 6310 ONLY:  
After you tap Connect for the first time, the phone will display a message  
asking if you want to bond. On Motorola, enter GRANT; on Nokia, enter  
ACCEPT. Make up a 4-16 digit passkey, enter it on the phone, then enter  
it on the handheld PC. After successfully bonding, you can set up the  
phone for automatic connections.  
Automatic Connections for Motorola Timeport 270C:  
On the phone, press MENU.  
Scroll to Settings, then press SELECT.  
Scroll to Connection, then press ON.  
On Bluetooth Link, press SELECT.  
Scroll to Devices, then press SELECT.  
Choose your mobile computer, then press EDIT.  
Scroll to Access:Ask, then press CHANGE.  
Scroll to Automatic, then press SELECT. Press DONE.  
Automatic Connections for Nokia 6310:  
On the phone, press MENU.  
Scroll to 10 Bluetooth, then press SELECT.  
Scroll to 4 View Paired Devices, then press SELECT.  
Highlight the Pocket PC, then press OPTIONS.  
Scroll to 3 Request Connection Authorization, then press NO.  
9. To use a different Bluetooth phone for dial-up networking, you can use  
the same connection setup, but you must make the new phone your  
favorite. Just run the Get Connected! Wizard again, select the new phone,  
and make it your new Favorite when prompted. Or you can use the  
Bluetooth Devices folder to change your favorite phone (see page 37).  
CHAPTER 2: BASIC SETUP | 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 Features  
This chapter explains how to turn the Bluetooth ON/OFF and how to use the  
Bluetooth ActiveSync and Bluetooth LAN Access options.  
Turn Radio Transmitter ON/OFF  
You may want to turn off the radio transmitter to save power or if you are  
entering an area with radio restrictions (e.g., an airplane).  
1. After you insert the Bluetooth Card, the Bluetooth icon  
should  
appear in the task tray (visible from the Today screen for Pocket PCs).  
Tap on the icon.  
2. In the pop-up menu, select Turn Transmitter OFF.  
3. The Bluetooth Card radio transmitter will shut off. The Bluetooth icon in  
the task tray will become gray, as will relevant menu options  
(e.g., Get Connected!).  
4. To turn the radio transmitter back on, tap on the gray Bluetooth icon. In  
the pop-up-menu, select Turn Transmitter ON.  
20 | CHAPTER 3: FEATURES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Bluetooth ActiveSync  
This section explains how to use the Bluetooth ActiveSync feature. It helps  
you quickly and easily ActiveSync to a notebook or desktop computer with  
ActiveSync v3.x installed.  
1. Tap on the Bluetooth icon  
. In the pop-up menu, select Bluetooth  
ActiveSync.  
2. The next screens will vary depending on if your Bluetooth Devices  
folder contains any computers, and if one is chosen as your favorite.  
Please refer to the appropriate scenario:  
SCENARIO #1: Your Bluetooth Devices folder contains a  
favorite desktop computer.  
(a) When you tap Bluetooth ActiveSync, your mobile computer will  
automatically try to connect to your favorite computer.  
(b) The Connect To screen will appear, reporting that it is trying to  
connect to Wireless ActiveSync.  
(c) After a successful connection is made, the status screen will report  
Connected. Now you are ready to synchronize files, if desired.  
CHAPTER 3: FEATURES | 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SCENARIO #2: Your Bluetooth Devices folder contains no  
favorite desktop computer.  
(a) When you tap on Bluetooth ActiveSync, a screen will appear that  
allows you to choose which computer to connect to in your  
Bluetooth Devices folder. Choose a computer from the list and tap  
Select, or tap Find to search for another computer.  
Note: If the computer you want to connect to is not listed, tap Find  
to begin a search. Proceed as described in Scenario #3 on the next  
page.  
(b) Your mobile computer will attempt to connect to your selected  
computer.  
(c) After a successful connection is made, the status screen will report  
Connected. Now you are ready to synchronize files, if desired.  
22 | CHAPTER 3: FEATURES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SCENARIO #3: Your Bluetooth Devices folder contains no computers.  
(a) When you tap on Bluetooth ActiveSync, a Bluetooth Device Search  
will automatically begin.  
Note: You can also start the device search by tapping Find in the  
Bluetooth Devices screen. See Scenario #2 on the previous page.  
(b) After the search is complete, select the computer you wish to  
ActiveSync with and tap Select. If the computer is not listed, make  
sure the computer id discoverable and tap Refresh to search again.  
If you would like to  
save the new  
computer to your  
Bluetooth Devices  
manager, check Save  
selection for future  
use.  
(c) After you tap Select, a service discovery phase will begin.  
(d) The Connect To screen will appear, reporting that it is trying to  
connect to Wireless ActiveSync.  
(e) After a successful connection is made, the status screen will report  
Connected. Now you are ready to synchronize, if desired.  
CHAPTER 3: FEATURES | 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Bluetooth LAN Access  
This section explains how to use the Bluetooth LAN Access feature to  
quickly and easily connect to a Bluetooth-enabled LAN access point.  
1. Tap on the Bluetooth icon. In the pop-up menu, select Bluetooth LAN  
Access.  
2. The next screens will vary depending on if your Bluetooth Devices  
folder contains any access points, and if one is chosen as your favorite.  
Please refer to the appropriate scenario:  
SCENARIO #1: Your Bluetooth Devices folder contains  
no favorite access point.  
(a) When you tap Bluetooth LAN Access, a screen will appear that allows  
you to choose which access point to connect to in your Bluetooth  
Devices folder. Choose an access point from the list and tap Select.  
If you would like to  
save the new access  
point to your Bluetooth  
Devices manager,  
check Save selection  
for future use.  
Note: If your access point is not listed, tap Find and proceed as  
described in Scenario #3.  
24 | CHAPTER 3: FEATURES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(b) Your mobile computer will try to connect to the selected access point.  
(c) If your LAN requires a passkey, a screen will appear, asking for the  
passkey. Enter the passkey, then tap ok.  
(d) After a successful connection is made, the status screen will report  
Connected.  
(e) Now you are ready to access your LAN for Internet access, files, etc.  
SCENARIO #2: Your Bluetooth Devices folder contains  
a favorite access point.  
(a) When you tap Bluetooth LAN Access, your mobile computer will  
automatically try to connect with your favorite access point.  
(b) If your LAN requires a passkey, a screen will appear, asking for the  
passkey. Enter the passkey, then tap ok.  
(c) After a successful connection is made, the status screen will report  
Connected.  
(d) Now you are ready to access your LAN for Internet access, files, etc.  
CHAPTER 3: FEATURES | 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SCENARIO #3: Your Bluetooth Devices folder has no access points.  
(a) When you tap Bluetooth LAN Access, the mobile computer will  
automatically begin to search for new Bluetooth devices.  
Note: You can also start the device search by tapping Find in the  
Bluetooth Devices screen. See Scenario #2 on the previous page.  
(b) After the search is complete, select the access point you wish to connect to.  
Tap Select. If the access point is not listed, tap Refresh to search again.  
If you would like to  
save the new access  
point to your Bluetooth  
Devices manager,  
check Save selection  
for future use.  
(c) After you tap Select, a service discovery phase will begin.  
(d) If the LAN requires a Passkey, a screen will appear, asking for the  
Passkey. Enter the passkey, then tap ok.  
(e) After a successful connection is made, the screen will report Connected.  
(f) Now you are ready to access your LAN for Internet access, files, etc.  
26 | CHAPTER 3: FEATURES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Bluetooth Faxing  
Many Bluetooth phones and other types of Bluetooth-enabled devices  
support faxing. This chapter explains how to use such a device with the  
Bluetooth Card and your mobile computer for wireless faxing. The Socket  
Bluetooth Connection Kit does not include faxing software. You must  
obtain Bluetooth faxing software separately from a third party.  
1. If using a Bluetooth phone, use the Get Connected! Wizard to connect to  
the phone. If using another type of Bluetooth-enabled device, use the  
Device Discovery Wizard to connect it to your mobile computer.  
2. Make sure your Bluetooth-enabled device supports faxing.  
In the Bluetooth Devices folder, select the device.  
View the device’s properties by either tapping on the properties icon  
or tapping Device | Properties. On a Pocket PC, you can also tap and  
hold your stylus on the device. In the pop-up menu, select Properties.  
Tap on the Services tab. Make sure Fax is listed. Tap ok.  
CHAPTER 3: FEATURES | 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Make sure a COM port is enabled for faxing.  
Tap on the Bluetooth icon. Select Advanced Features, then My  
Bluetooth Device. Tap on the COM Ports tab.  
In the COM Ports screen, make sure Bluetooth Fax is checked.  
Note the COM port number assigned to faxing. You may need this to  
configure your fax software. Tap ok.  
4. Assign your Bluetooth phone as your favorite fax.  
In the Bluetooth Devices folder, tap Tools | My Favorites.  
Tap on the FAX tab.  
Select Use the favorite selected above, then select your phone from  
the drop-down menu. Tap ok.  
28 | CHAPTER 3: FEATURES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Now you are ready to use your fax software. While configuring the fax  
connection, select either Bluetooth FAX or the COM port assigned to  
Bluetooth faxing.  
CHAPTER 3: FEATURES | 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 4 Advanced Features  
This chapter explains optional steps you may choose to perform while  
installing and/or using the Bluetooth Card.  
The steps covered in this chapter include:  
Setting up your Bluetooth Card  
Viewing and enabling/disabling Bluetooth COM ports  
Using the Bluetooth Device Discovery Wizard  
Using the Bluetooth Device Bonding Wizard  
Viewing device properties  
Setting up a Favorite Device  
Changing views  
Deleting an item from the Bluetooth Devices folder  
30 | CHAPTER 4: ADVANCED FEATURES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set up Your Bluetooth Card  
Note: If you use the Get Connected! Wizard, which is recommended for  
normal usage, then this step is not necessary. This step would be used to  
change the friendly name of your mobile computer.  
1. After you insert the Bluetooth Card, the Bluetooth icon  
should  
appear in the task tray (visible from the Today screen for Pocket PCs).  
Tap on the icon.  
2. In the pop-up menu, select Advanced Features, then My Bluetooth Device.  
3. In the My Bluetooth Device screen, you can modify the Friendly Name and  
make any desired configuration changes. When done, tap OK.  
Note:  
In normal phone connect operation, Discoverable mode is not needed  
and should be disabled.  
If you do enable Discoverable mode (e.g., for ActiveSync), note that it  
does not shut off by itself. To save power, remember to disable it  
when not needed.  
Connectable, Use Authentication, and Use Encryption are also not  
required for printing or dial-up networking applications.  
Check Use Authentication to enable the Use Encryption option.  
CHAPTER 4: ADVANCED FEATURES | 31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assign COM Ports  
Follow these steps to view and/or modify the Bluetooth COM ports.  
1. Tap on the Bluetooth icon (in the Today screen for Pocket PCs). Select  
Advanced Features then My Bluetooth Device.  
2. The My Bluetooth Device screen will appear. Tap on the COM Ports tab.  
3. As needed, view and/or enable/disable the Bluetooth COM port  
assignments. Tap ok.  
Note: The Bluetooth Phone port cannot be disabled.  
32 | CHAPTER 4: ADVANCED FEATURES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Discover Bluetooth Device(s)  
Follow these steps to discover other Bluetooth devices nearby, including  
non-phone devices. The Device Discovery Wizard is a more detailed  
alternative to using the Bluetooth “Get Connected!” Wizard or Bluetooth  
ActiveSync or Bluetooth LAN Access options. The Device Discovery  
Wizard allows you to discover any type of Bluetooth device.  
1. If not open, launch the Bluetooth Devices folder:  
Tap on the Bluetooth icon (in the Today screen for Pocket PCs). Select  
Advanced Features then Bluetooth Devices.  
HPC 2000s — You can also tap on Bluetooth Devices on the desktop.  
2. In the Bluetooth Devices Folder, tap on the Device Discovery icon  
.
Or you can tap on Tools. In the pop-up menu, select Device Discovery.  
3. Follow the Bluetooth Device Discovery Wizard to search for Bluetooth  
devices nearby. When prompted, select the device type you seek.  
4. When the search is complete, a screen will report the discovered  
Bluetooth devices. Check the box next to any device you wish to save  
information about, (i.e., any devices you wish to connect to). Tap Next>.  
5. A service discovery phase will begin, 5-10 seconds per chosen device.  
6. In the next screen, tap Finish.  
CHAPTER 4: ADVANCED FEATURES | 33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Bond with Discovered Device(s)  
Follow these steps to bond with an already discovered Bluetooth device. In  
most cases, bonding is for establishing secure communications with a  
Bluetooth-enabled phone. This is a more detailed alternative to using the  
Bluetooth “Get Connected! Wizard.”  
Important!  
Do not try to bond with a Motorola Timeport 270C or Nokia 6310!  
Do not use this method to bond with a printer! The third-party printing  
software included on the installation CD also handles bonding.  
1. If not open, launch the Bluetooth Devices folder:  
Tap on the Bluetooth icon (in the Today screen for Pocket PC devices).  
Select Advanced Features then Bluetooth Devices.  
HPC 2000s — You can also tap on Bluetooth Devices on the desktop.  
2. Tap and hold your stylus on the Bluetooth device you want to bond with.  
In the pop-up menu, select Bond.  
3. Alternatively, after selecting a device, tap on the Bond icon  
.
Or tap on Device, then select Bond.  
34 | CHAPTER 4: ADVANCED FEATURES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. The Bluetooth Device Bonding Wizard will launch. Follow the wizard to  
bond with your selected device.  
5. As prompted, make sure the Bluetooth device that you want to bond with  
is in Bondable mode.  
6. If the remote device is set up to accept bonding, a Bluetooth Passkey  
screen will appear. To continue bonding, enter the correct passkey and  
tap Reply.  
7. When you have successfully bonded with the other device, tap Finish.  
CHAPTER 4: ADVANCED FEATURES | 35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
View Device Properties  
Follow these steps to view the properties of an already discovered device.  
1. If not open, launch the Bluetooth Devices folder.  
Tap on the Bluetooth icon (in the Today screen for Pocket PCs). Select  
Advanced Features then Bluetooth Devices.  
For HPC 2000s, you can also tap on the Bluetooth Devices folder directly  
on the desktop.  
2. Select a device. Tap on the Properties icon  
, or tap on Device then  
select Properties.  
Pocket PCs — Alternatively, you can tap and hold your stylus on the  
Bluetooth device you want to view information about. In the pop-up  
menu, select Properties.  
3. Use the General and Services screens to research device properties.  
If needed, assign a new device type icon by tapping on the arrow buttons  
in the General screen. You can also use the Device name field to rename  
the device. When done, tap ok for the setting to take effect.  
36 | CHAPTER 4: ADVANCED FEATURES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set up Your Favorite Device  
Follow these steps to set up default devices in the Bluetooth Devices folder.  
Note: The Get Connected! Wizard automatically assigns the favorite phone.  
1. Tap on Tools and select My Favorites.  
2. Tap on the tab for the type of device you would like to set a favorite for.  
If needed, use the arrow buttons to scroll and find the tab you need.  
Note: Tabs will appear only for COM ports you have enabled. To enable  
a port, refer to the “Assign COM Ports” section earlier in this chapter.  
3. To select a favorite device, select Use the favorite selected above. In the  
drop-down menu, select your device. Tap ok.  
4. After setting a device as your favorite, its icon will appear in the  
Bluetooth Devices folder with a heart next to it.  
What if I can’t connect to a device in the Bluetooth Devices  
folder, or I can’t select it as my favorite?  
You can connect to a device only if its services have been successfully  
discovered. Follow these steps to perform a service discovery:  
With the device selected in the folder, tap on Properties  
, then select  
the Services tab. Tap the Update button.  
Please report any devices that you have problems discovering services for.  
CHAPTER 4: ADVANCED FEATURES | 37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Change Views  
You can switch between the Large Icons or Details views for the Bluetooth  
Devices folder.  
1. In Bluetooth Devices, tap on View.  
2. In the pop-up menu, choose between Large Icons or Details.  
Large Icons view  
Details view  
Note: In Details view, scroll right to see the current Bonded status.  
38 | CHAPTER 4: ADVANCED FEATURES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Delete a Device from the Folder  
If you no longer plan to connect with it, you can delete a device from the  
Bluetooth Devices folder.  
1. If not open, launch the Bluetooth Devices folder.  
2. Pocket PCs only: Tap and hold your stylus on the device you wish to  
delete. In the pop-up menu, select Delete.  
3. Alternatively, after selecting a device, tap on the Delete icon  
.
Or tap on Device then select Delete.  
4. A Confirm screen will appear. Tap Yes.  
CHAPTER 4: ADVANCED FEATURES | 39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5 Socket OBEX  
This chapter explains how to use the Socket OBEX (object exchange)  
application to trade business cards, contacts or files with another Bluetooth  
device that supports OBEX.  
Socket’s Bluetooth OBEX application supports five operations:  
Exchange Business Cards  
Send a Contact  
Send a File  
Browse Remote Device  
Receive Contact or File  
Enable File Sharing  
The first four operations — exchange business cards, send a contact, send a  
file, and browse remote device — are client-oriented. They involve  
initiating an object exchange.  
The last two operations — receive contact or file and enable file sharing —  
are server-oriented. They involve accepting objects in an exchange initiated  
by another Bluetooth device.  
Important!  
If you have not done so already, be sure to run the OBEX Installer from  
the Socket Bluetooth Card Installation CD. Otherwise, you will not be  
able to perform any OBEX operations with the Bluetooth Card.  
40 | CHAPTER 5: SOCKET OBEX  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Exchange Business Cards  
1. Make sure both Bluetooth devices have a business card assigned to it.  
Note: If each device does not have a business card assigned to it, you  
will not be able to exchange business cards.  
To assign a business card to your mobile computer, do the following:  
Tap on the Bluetooth icon. In the pop-up menu, tap Advanced  
Features | My Bluetooth Device.  
Tap on the Object Sharing tab. Under My business card, tap  
Assign…  
In the next screen, select your business card and tap ok. If your  
business card is not listed, tap on the Contacts button to create one.  
When you return to the Object Sharing screen, tap ok.  
CHAPTER 5: SOCKET OBEX | 41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Make sure the other Bluetooth device is set up to receive a contact. The  
device must support the OBEX Object Push profile.  
Note: If the other device is also using the Socket Bluetooth Connection  
Kit, you can set it up to receive a contact by tapping the Bluetooth icon.  
In the pop-up menu, tap Transfer via Bluetooth | Receive Contact or File.  
3. Now you are ready to exchange business cards. Tap on the Bluetooth  
icon. In the pop-up menu, tap Transfer via Bluetooth | Exchange  
Business Cards.  
4. If your mobile computer has no devices in the Bluetooth Devices  
Folder, then it will begin to search for Bluetooth devices nearby.  
5. Select the Bluetooth device you wish to exchange business cards with.  
If the device is not listed, tap Find.  
6. Your mobile computer will begin to exchange business cards. After the  
exchange, the new business card should appear in your Contacts list.  
Note: Depending on  
the remote device’s  
capabilities, it may  
only accept your  
business card but not  
send one to your  
device..  
42 | CHAPTER 5: SOCKET OBEX  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Send a Contact  
1. Make sure the other Bluetooth device is set up to receive a contact. It  
must support the OBEX Object Push server profile. Refer to the  
documentation that came with the device for instructions.  
Note: If the other device is also using the Socket Bluetooth Connection  
Kit, you can set it up to receive a contact by tapping the Bluetooth icon.  
In the pop-up menu, tap Transfer via Bluetooth | Receive Contact or File.  
2. Now you are ready to send a contact. Go to your Contacts folder.  
3. Pocket PCs:Tap and hold your stylus on the contact(s) you would like  
to send. In the pop-up menu, select Send Via Bluetooth.  
4. HPC 2000: Highlight the contact(s) that you would like to send. Tap on  
the Tools menu and select Send Via Bluetooth.  
CHAPTER 5: SOCKET OBEX | 43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. If your mobile computer has no devices in the Bluetooth Devices  
Folder, then it will begin to search for Bluetooth devices nearby.  
6. Select the Bluetooth device you wish to send the contact(s) to. If the  
desired device is not listed, tap Find.  
7. Your mobile computer will process and send the contact(s).  
44 | CHAPTER 5: SOCKET OBEX  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Send a File  
1. Make sure the other Bluetooth device is set up to receive a file. It must  
support the OBEX Object Push server profile. Refer to the  
documentation that came with the device for instructions.  
Note: If the other device is also using the Socket Bluetooth Connection  
Kit, you can set it up to receive a file by tapping the Bluetooth icon. In  
the pop-up menu, tap Transfer via Bluetooth | Receive Contact or File.  
2. Now you are ready to send a file. Tap on the Bluetooth icon. In the pop-  
up menu, tap Transfer via Bluetooth | Send a File.  
3. If your mobile computer has no devices in the Bluetooth Devices  
Folder, then it will begin to search for Bluetooth devices nearby.  
4. Select the Bluetooth device you wish to send a file. If the desired device  
is not listed, tap Find.  
CHAPTER 5: SOCKET OBEX | 45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. In the next screen, tap on the file you wish to send. You can use the  
Folder and Type drop-down menus to search for your file. Also, you can  
scroll horizontally to view the folder, date, size, type, and location of  
each file.  
6. Your mobile computer will send the file.  
46 | CHAPTER 5: SOCKET OBEX  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Browse Remote Device  
The Bluetooth File Explorer lets your mobile computer share files with  
another Bluetooth device. The other device must support the OBEX File  
Transfer server profile.  
This section covers the following file transfer operations:  
Prepare for file transfer  
Send/receive file(s) or folder(s)  
Create a folder  
Delete file(s) or folder(s)  
Refresh remote view  
Connect/disconnect  
Exit the program  
Note: “Local device” refers to the mobile computer you are running the  
Socket OBEX from. “Remote device” refers to the Bluetooth device you are  
trying to transfer files with.  
Prepare for File Transfer  
1. Make sure the remote device has file sharing enabled. It must support  
the OBEX File Transfer server profile.  
Note: If the other device is also using the Socket Bluetooth Connection  
Kit, you can enable file sharing by tapping the Bluetooth icon. In the  
pop-up menu, tap Transfer via Bluetooth | Enable File Sharing.  
2. Now you are ready to browse the remote device. Tap on the Bluetooth  
icon. In the pop-up menu, tap Transfer via Bluetooth | Browse Remote  
Device.  
3. If your mobile computer has no devices in the Bluetooth Devices Folder  
that supports OBEX File Transfer, then it will begin to search for  
Bluetooth devices nearby.  
CHAPTER 5: SOCKET OBEX | 47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Select the Bluetooth device you wish to browse. If the desired device is not  
listed, tap Find.  
5. Your mobile computer will begin to establish a file sharing connection.  
6. After the devices successfully connect, the Bluetooth File Explorer will  
appear. Half of the screen shows contents of the remote device, while  
the other half shows contents of your device (the local device). The  
very bottom of the screen reports the connection status.  
Note:  
The HPC 2000  
screen is  
divided  
horizontally,  
unlike the  
Pocket PC 2002  
screen shown  
here.  
48 | CHAPTER 5: SOCKET OBEX  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Send/Receive File(s) or Folder(s)  
1. Select the file(s) or folder(s) that you wish to transfer. You can only  
select items from one device per transfer session.  
Single-tap items to select them for transfer.  
Double-tap on a folders to open it and see its contents.  
Note: A copy  
of the selected  
items will be  
transferred,  
not the  
original.  
2. There are two different ways to initiate the transfer.  
Tap on the File menu. Select Send to remote or Get from remote, as  
applicable. The inappropriate option should be gray.  
Tap on the Send to remote icon  
or Get from remote icon  
,
as applicable. The inappropriate icon should be gray.  
3. A screen will report the status of the transfer.  
4. After the transfer, a copy of each selected item should appear in the  
other device.  
CHAPTER 5: SOCKET OBEX | 49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Create a Folder  
1. Tap on the File menu. Select Remote device or Local device, wherever  
you want to create a folder, then tap Create remote folder or Create local  
folder, as applicable.  
2. Alternatively, on Pocket PCs, you can tap and hold your stylus on an  
item in either the remote or local device that you wish to put in a new  
folder. In the pop-up menu, select Create folder.  
3. In the next screen, enter a name for your new folder. Tap OK.  
4. The new folder should be listed under the appropriate device.  
50 | CHAPTER 5: SOCKET OBEX  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Delete File(s) or Folder(s)  
1. Select item(s) that you wish to delete. You can only delete item(s) from  
one device at a time.  
2. Tap on the File menu. Select Remote device or Local device, wherever  
the item(s) are located, then tap Delete remote item(s) or Delete local  
item(s), as applicable.  
3. Alternatively, on Pocket PCs, you can tap and hold your stylus an item  
in either the remote or local device that you wish to put in a new folder.  
In the pop-up menu, select Delete folder.  
4. In the Confirm screen, tap Yes.  
Refresh Remote View  
1. Tap on the Device menu. Select Refresh remote view.  
2. Your local device will begin to read the contents of the remote device.  
3. After a few seconds, the view of the contents of the remote device will  
be refreshed.  
CHAPTER 5: SOCKET OBEX | 51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connect/Disconnect  
To connect to the remote device, do the following:  
1. Make sure the remote device has file sharing enabled.  
2. Start the connection process by either of two methods:  
Tap on the Device menu. Select Connect.  
Tap on the Connect icon  
.
3. In the next screen, select the device you wish to connect to. Tap Select.  
Your mobile computer will attempt to connect to the device selected.  
To disconnect from the remote device, do the following:  
1. Start the disconnection process by either of two methods:  
Tap on the Device menu. Select Disconnect.  
Tap on the Connect icon  
.
2. Your mobile computer will disconnect from the remote device.  
Afterwards, no contents will be listed for the remote device.  
Exit Bluetooth File Explorer  
To exit the Bluetooth File Explorer, tap File | Exit.  
52 | CHAPTER 5: SOCKET OBEX  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Receive Contact or File  
1. Tap on the Bluetooth icon. In the pop-up menu, tap Transfer via  
Bluetooth | Receive Contact or File.  
2. The Receive Contact or File status screen will appear. Your mobile  
computer will wait two minutes for the contact or file.  
3. After successfully connecting to the remote device, the screen will  
report Connected then disappear. The new contact or file should now be  
on your device.  
4. If two minutes passes before you receive the item, tap Wait Again.  
5. After you receive the file or contact, the “Receive Contact or File” feature  
is automatically disabled.  
Enable File Sharing  
1. Tap on the Bluetooth icon. In the pop-up menu, tap Transfer via  
Bluetooth | Receive Contact or File.  
2. The Enable File Sharing status screen will appear. Your mobile  
computer will wait two minutes for the remote device to connect.  
3. After successfully connecting to the remote device, the screen will  
report Connected.  
4. If two minutes passes before you connect, tap Wait Again.  
5. File sharing will be enabled until you end it by tapping Cancel.  
CHAPTER 5: SOCKET OBEX | 53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6 The Socket Dialer  
This chapter explains how to assign a dialing prefix and use the Socket  
Dialer to dial a number directly from your Contacts list. The Socket Dialer  
makes it quick and easy to perform dial-up networking.  
If you have not done so already, be sure to run the Dialer Installer from the  
Socket Bluetooth Card Installation CD. While installing the program, you  
can also assign the dialing prefix.  
Note: The Socket Dialer has been verified to work with Nokia and Ericsson  
phones and is known not to work with the Motorola 270c, NTT Docomo  
Paldio 633S or Sony au C413S phone. Results may vary with other phones  
that are not listed as being supported by the Socket Bluetooth system.  
Assign a Dialing Prefix  
If you have not already assigned a dialing prefix during the install process,  
you can do so by following these steps:  
1. Pocket PC devices — Go to Start | Settings | System.  
Tap on Socket Dialer.  
HPC — Go to Start | Settings | Control Panel. Tap on Socket Dialer.  
2. Select the appropriate Dialing Prefix, then tap ok.  
54 | CHAPTER 6: SOCKET DIALER  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use the Socket Dialer  
1. To use the dialer, the mobile computer must already be connected to the  
Bluetooth phone. You can use the Get Connected! Wizard to do this.  
Also, the Bluetooth phone must be selected as your favorite.  
2. Pocket PC devices — Go to Start | Contacts.  
HPC 2000 — Click on the Contacts icon from the desktop.  
3. Tap and hold your stylus on the contact you wish to dial to. In the pop-  
up menu, select Dial Contact. Alternatively, you can tap on Tools and  
select Dial Contact.  
4. If you have multiple phone numbers for a contact, a screen will appear  
listing them, including any dialing prefix you may have assigned.  
Select the phone number you wish to dial.  
CHAPTER 6: SOCKET DIALER | 55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Your mobile computer will connect to your phone and begin dialing.  
Note: The Socket Dialer can dial a phone number containing any of the  
17 following non-numeric characters:  
*
#
+
.
/
!
@ -  
\
space A B C D T P  
W
Additionally, the following string can be included in a phone number:  
(‘,’)  
The Socket Dialer can not dial a phone number containing non-numeric  
characters other than those listed above.  
Socket recommends that you follow the standard Microsoft Outlook  
format for phone numbers.  
56 | CHAPTER 6: SOCKET DIALER  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 7 Bluetooth Printing  
This chapter explains how to print from a Bluetooth-enabled printer, using  
either of two options. If you have a HPC 2000, you can print directly from  
Pocket Word or Pocket Excel. If you have a Pocket PC, you can install the  
PrintPocketCE software included on the installation CD to print from your  
device.  
HPC 2000 only:  
With the right settings, you can print directly from Pocket Word or Pocket  
Excel.  
1. In the Print screen, select your Bluetooth printer and Bluetooth COM  
port. Tap OK.  
2. A Bluetooth device search will begin.  
3. After the search, select the Bluetooth printer from the list and tap Select.  
If the printer does not appear, tap Refresh to try again.  
Note: Check Save selection for future use if you would like to save the  
discovered printer in your Bluetooth Devices folder.  
4. After a successful connection is made, the status screen will report  
Connected. Printing should now begin.  
CHAPTER 7: BLUETOOTH PRINTING | 57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Pocket PC 2000 or Pocket PC 2002:  
You can print using the PrintPocketCE program included on the Socket  
Bluetooth Card Installation CD. The Socket Bluetooth Connection Kit  
includes a 30-day trial version of PrintPocketCE. For a full version, please  
If you have not done so already, be sure to install the PrintPocketCE  
program. To find the install for this program on the installation CD, go to  
the Third Party folder, then the Field Software folder.  
1. Start the printing program. Go to Start | Programs | PrintPocketCE.  
2. In the welcome screen, tap OK.  
58 | CHAPTER 7: BLUETOOTH PRINTING  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. In the main screen, tap on the file you wish to print.  
To locate your file:  
Tap on the Word icon at the bottom of the screen to view a list  
of Pocket Word docs, TXT, or RTF files.  
Tap on the Excel icon to view a list of Pocket Excel files  
Tap on the yellow envelope icon to view email messages.  
Tap on the Doc/Excel/Email Options menu and select another  
type of printing (e.g., Go to email printing).  
Use the folders drop-down menu to switch between folders.  
4. The next screens let you adjust the printer settings.Make sure the correct  
printer is chosen. For Port, choose Bluetooth: Socket CF Card. Make any  
other necessary printer settings.  
Note:  
For a Pocket Excel file, the first screen lets you adjust printing  
properties. Tap Continue to select the correct printer and port.  
Instead of Bluetooth: Socket CF Card, you can choose the COM port  
assigned to your Bluetooth printer.  
CHAPTER 7: BLUETOOTH PRINTING | 59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. If needed, tap on More Settings to adjust margins, form feed, and other  
settings. Tap OK to return to the main printing screen.  
6. When done adjusting the settings, tap Start Printing.  
7. The mobile computer will search for a Bluetooth printer. After the  
search, the Bluetooth Devices folder will appear. Select the Bluetooth  
printer, then tap Select .  
If the mobile computer fails to detect the Bluetooth printer, make sure  
the printer is on, discoverable, and in range. Tap Find to repeat the  
search.  
8. The document will begin printing.  
9. To exit the program, tap Doc Options. In the pop-up menu, tap Exit.  
60 | CHAPTER 7: BLUETOOTH PRINTING  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix A Specifications  
CompactFlash Card  
Physical Characteristics:  
Dimensions: 36.4 x 42.8 x 3.3 mm  
Mass: 10 g  
Power Consumption (3.3 V Supply):  
Idle: 16 mA Typical: 40 mA Maximum: 90 mA  
Interface Standards:  
CompactFlash Interface: CompactFlash I/O, Type I  
With CompactFlash-to-PC Card Adapter: PCMCIA, Type II  
Serial Communications: TTL  
Operating System Support:  
Windows CE v3.0 for Pocket PC 2000, Pocket PC 2002 and Handheld  
PC 2000  
Software Compatibility: Windows COM port  
Hardware Compatibility:  
Standard Card (without PC Card adapter):  
Pocket PC 2000, Pocket PC 2002 or HPC 2000 with CompactFlash I/O slot  
With CompactFlash-to-PC Card adapter:  
Pocket PC 2000, Pocket PC 2002 or HPC 2000 with PC Card slot.  
Software Included: Socket Bluetooth Connection Kit Installation CD  
Compatible Applications: PrintPocketCE  
Warranty: CompactFlash Card: Three years  
Certification:  
FCC: Part 15, Section 15.247  
Industry Canada: RSS 210  
Bluetooth 1.1  
ETS EN300 328-2  
ETS EN301 489-1  
ETS EN301 489-17  
TELEC 01NY******  
APPENDIX A: SPECIFICATIONS | 61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SDIO Card  
Physical Characteristics:  
Dimensions: 40 x 24 x 2.1 mm  
Mass: 4 g (maximum)  
Power Consumption (3.3 V Supply, in Tx/Rx):  
Typical: 50 mA Maximum: 100 mA  
Interface Standards:  
SDIO Interface: SDIO  
Serial Communications: TTL  
Operating System Support:  
Any Pocket PC running SDIO Now! software  
Software Compatibility:  
Windows COM port  
Hardware Compatibility:  
Standard Card  
Pocket PC with SDIO slot  
Software Included:  
Socket Bluetooth Connection Kit Installation CD  
Compatible Applications:  
PrintPocketCE  
Warranty:  
SDIO Card: Three years  
Certification:  
FCC: Part 15, Section 15.247  
Industry Canada: RSS 210  
Bluetooth 1.1  
SDIO card Type-B for Bluetooth 1.0  
ETS EN300 328-2  
ETS EN301 489-1  
ETS EN301 489-17  
TELEC  
62 | APPENDIX A: SPECIFICATIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Safety and Usage Tips  
About Bluetooth and Health  
Bluetooth wireless technology allows you to use short-range radio signals to  
connect a variety of devices, such as mobile phones, Pocket PCs, notebook  
computers, printers, LAN access points, and many other devices at home or  
work. These radio signals replace the cables that have traditionally  
connected these devices.  
Bluetooth products have small radio transmitters and receivers. Output  
power is normally very low, only 1 mW (1/1000 of a watt). This gives a  
working range of approximately 10 meters.  
The maximum exposure levels from Bluetooth products are far below  
recommended safety guidelines. At most, typical Bluetooth devices (1mW)  
reach only one percent of the prescribed safety levels.  
CompactFlash Card  
Product Care  
Do not expose your product to liquid, moisture or extreme humidity.  
Do not expose your product to extreme high or low temperatures.  
Do not expose your product to lit candles, cigarettes, or cigars, or to  
open flames, etc.  
Do not drop, throw or try to bend the product, as rough treatment could  
damage it.  
Do not paint your product, as the paint could obstruct parts and prevent  
normal use.  
Do not attempt to disassemble your product: a broken warranty seal will  
void the warranty. The product does not contain consumer serviceable  
components. Should your Bluetooth Card need service, please contact  
Socket technical support at: [email protected].  
Treat your product with care. Keep in a clean and dust-free place.  
Changes or modifications of this product, not expressly approved by  
Socket, may void the user’s authority to operate the equipment.  
Antenna Care  
Do not place a metallic shield around your Bluetooth Card since it will  
reduce the radio transmission efficiency.  
APPENDIX B: SAFETY AND USAGE TIPS | 63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Efficient Use  
For optimum performance, please make sure that there is no metal  
surrounding your Bluetooth Card.  
Driving  
RF energy may affect some electronic systems in motor vehicles, such as car  
stereo, safety equipment, etc. Check with your vehicle manufacturer’s  
representative to be sure that your Bluetooth Card will not affect the  
electronic system in your vehicle.  
Aircraft  
Turn off your Bluetooth Card antenna before boarding any aircraft.  
To prevent interference with communications systems, you must not use  
your Bluetooth Card while the plane is in the air.  
Do not use it on the ground without permission from the crew.  
Radio Frequency Exposure  
Your Bluetooth Card is a radio transmitter and receiver. When in operation,  
it communicates with a Bluetooth-equipped mobile phone, mobile computer  
or other device by receiving and transmitting radio frequency (RF) magnetic  
fields in the frequency range 2400 to 2500 MHz. The output power of the  
radio transmitter is 0.001 Watt.  
The Bluetooth Card unit is designed to be in compliance with the RF  
exposure limits set by national authorities and international health agencies1  
when installed or used separately from other antennas or radio transmitters.  
1 Examples of RF exposure standards and guidelines:  
ICNIRP, “Guidelines for limiting exposure to time-varying electric, magnetic, and  
electromagnetic fields (up to 300 GHz)”, International Commission on Non-Ionizing  
Radiation Protection (ICNIRP), Health Physics, vol. 74, pp 494-533, April 1998.  
99/519/EC, EU Council Recommendation on the limitation of exposure to the  
general public to electromagnetic fields 0 Hz – 300 GHz, Official Journal of the  
European Communities, July 12, 1999.  
ANSI/IEEE C95.1-1992, “Safety levels with respect to human exposure to radio  
frequency electromagnetic fields, 3 kHz to 300 GHz”, The Institute of Electrical and  
Electronics Engineers, Inc., New York, 1991.  
FCC Report and Order, ET Docket 93-62, FCC 96-326, Federal Communications  
Commission (FCC), August 1996.  
Radiocommunications (Electromagnetic Radiation Human Exposure) Standard  
1999, Australian Communications Authority (ACA), May 1999.  
64 | APPENDIX B: SAFETY AND USAGE TIPS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SDIO Card  
Product Care and Usage  
Do not disassemble, modify or repair this unit. There is danger of fires,  
electrical shock, damage to the unit, and injury. Any repair is impossible.  
Do not remove the label and do not paste other labels. It may cause  
malfunction. Disassembling or remodeling this unit will invalidate the  
warranty and any other service plan.  
Do not use this unit in an area where people wearing pacemakers may be  
nearby (such as in a crowded train).  
People wearing a pacemaker should use the system at least 22 cm from  
the pacemaker.  
Do not use this unit in medical facilities such as hospitals or in other  
places near medical electronic equipment. Likewise, do not attach  
medical electronic equipment to the Bluetooth Card.  
Do not use the unit near automatic doors, fire detection devices, or other  
automatically controlled devices.  
Do not use this unit in an aircraft or place where this unit may  
electromagnetically affect other devices.  
If the Bluetooth SDIO Card gives any electromagnetic interference to  
other devices, either turn off the mobile computer containing the  
Bluetooth Card or eject the Bluetooth Card from the mobile computer.  
Do not put the unit in your mouth.  
Do not use this unit in a bath or any other area where liquid may be spilt  
on the unit. Do not use this unit in an environment with high humidity or  
expose it to rain or mist. There is a risk of electrical shock.  
Do not expose your product to extreme high or low temperatures, or to  
rapidly changing temperatures.  
Do not insert any metal objects such as staples or paper clips into the  
unit.  
Do not touch the unit during or immediately after use in a mobile  
computer slot. There is a danger of burns from high heat levels. People  
with sensitive skin should also use caution.  
Do not place the unit in direct sunlight, in a closed car, near a heating  
device or any other location where the temperature may become high.  
Do not place the unit in a location where the temperature becomes  
extremely low.  
Do not place the unit in a location where the temperature changes  
rapidly.  
Do not place the unit in an extremely dusty location.  
Do not use the unit near a microwave oven or in areas where there is a  
risk of electrical shock, static electricity or electromagnetic interference.  
Do not use the Bluetooth Card in a place with risk of strong vibration.  
Do not use benzene or paint thinner to clean the Bluetooth Card.  
APPENDIX B: SAFETY AND USAGE TIPS | 65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Restrictions  
The Bluetooth SDIO Card was not designed to be used with systems  
directly responsible for sustaining human life. Avoid using this product  
with such systems (e.g., medical equipment for life support, surgery,  
etc.).  
When this product is to be used in installations responsible for human  
safety or the maintenance of public installations (e.g., main control or  
safety systems in nuclear power plants, mass transportation systems,  
etc.), special transport, maintenance, operation, and wiring (i.e., safety  
systems installed in close consultation with a Socket representative)  
becomes necessary. Please contact an authorized Socket service center.  
66 | APPENDIX B: SAFETY AND USAGE TIPS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix C Troubleshooting  
SYMPTOM:  
I cannot connect to a device in my folder.  
POSSIBLE REASONS  
The services for the devices have  
not been discovered.  
SOLUTION  
In the Bluetooth Devices folder, tap  
on the Properties icon. Tap on the  
Services tab. In the Services  
screen, tap on the Update button.  
SYMPTOM:  
When I use the Get Connected! Wizard to  
connect to my phone, I get a screen that says  
Partial Success.  
POSSIBLE REASONS  
The phone is not in Bondable  
mode.  
SOLUTION  
Set your phone to Bondable mode.  
If needed, consult your phone’s  
documentation for help.  
The passkey is incorrect.  
Make sure the same passkey is  
entered on the phone and your  
mobile computer. If using a pre-  
assigned passkey for the phone,  
verify that your passkey is  
accurate.  
SYMPTOM:  
When I insert the Bluetooth Card, I get a  
message that says Unrecognized Card.  
POSSIBLE REASONS  
SOLUTION  
You did not install the software for Remove the card and install the  
the Bluetooth Card yet.  
software.  
APPENDIX C: TROUBLESHOOTING | 67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SYMPTOM:  
My mobile computer cannot find any Bluetooth  
devices nearby.  
POSSIBLE REASONS  
You are too far from other  
Bluetooth devices.  
SOLUTION  
Move closer to the other Bluetooth  
device(s), within a range of 10  
meters.  
The Bluetooth device(s) nearby are Turn on the Bluetooth device(s)  
not turned on.  
you wish to find.  
The Bluetooth device(s) are not in  
discoverable mode.  
Set the Bluetooth device(s) to  
discoverable mode. If needed,  
consult the device’s documentation  
for help.  
SYMPTOM:  
My mobile computer keeps powering down to  
protect memory contents.  
POSSIBLE REASONS  
Your mobile computer’s battery is  
low.  
SOLUTION  
Recharge the battery.  
The Bluetooth Card has been in  
Tap on the Bluetooth icon, then  
Discoverable mode for a long time. select My Bluetooth Device.  
This mode requires a lot of battery Uncheck Discoverable.  
power and should be turned off  
whenever not needed.  
SYMPTOM:  
When I try to connect my Bluetooth phone and  
mobile computer, the phone thinks that I am  
using a different mobile computer that I  
previously paired with the phone.  
POSSIBLE REASONS  
The phone remembers the name  
and address of the mobile  
computer it last paired with via  
your Bluetooth Card.  
SOLUTION  
Manually delete the pairing device  
and name from your phone. Refer  
to your phone’s user  
documentation for instructions.  
68 | APPENDIX C: TROUBLESHOOTING  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SYMPTOM:  
I can’t make my Ericsson R520 phone  
discoverable.  
POSSIBLE REASONS  
You attempted to bond, with the  
phone, and when the phone  
presented a “pairing query,” you  
entered No. This prevents the  
phone from being discoverable  
until it is reset.  
SOLUTION  
Reset the phone by removing its  
battery.  
APPENDIX D ISP RESOURCES | 69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix D Support Resources  
Users’ Forum  
If you would like to discuss the Socket Bluetooth Connection Kit with other  
users, visit Socket’s users’ forum at: www.socketforum.com  
Technical Support  
If you have trouble installing or using the Bluetooth Card, please refer to the  
“Troubleshooting” section. If problems persist, feel free to contact Socket’s  
technical support department.  
IMPORTANT! Before you contact technical support, please do the  
following:  
1. Make sure you have registered your product. You can register online at  
2. Have the following information ready:  
The part number (including revision level) and serial number of  
your Bluetooth Card. See the diagram below.  
The manufacturer, model number, and Windows CE version of  
your mobile computer  
If applicable, the manufacturer, model number, and/or network  
carrier of the Bluetooth-enabled device you are trying to connect to  
What you did to try to correct the problem  
To reach Socket’s technical support department:  
Visit  
Email  
Phone  
Fax  
510-744-2720  
510-744-2727  
Please refrain from disassembling the CompactFlash card. Disassembly of  
this device will void the product warranty.  
70 | APPENDIX D: TECHNICAL SUPPORT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited Warranty  
Socket Communications Incorporated (Socket) warrants this product against defects  
in material and workmanship, under normal use and service, for the following  
period from the date of purchase:  
Plug-in card: Three years  
Incompatibility is not a defect covered by Socket’s warranty. During the warranty  
period, Socket will, at its option, repair or replace the defective product at no charge  
when furnished with proof of retail purchase, provided that you deliver the product  
to Socket or to an authorized Socket Service Center.  
The returned product must be accompanied by a return material authorization  
(RMA) number issued by Socket or by Socket's Authorized Service Center. If you  
ship the product, you must use the original container or equivalent and you must pay  
the shipping charges to Socket. Socket will pay shipping charges back to any  
location in the contiguous United States. This warranty applies only to the original  
retail purchaser and is not transferable.  
Socket may, at its option, replace or repair the product with new or reconditioned  
parts and the returned product becomes Socket's property. Socket warrants the  
repaired or replaced products to be free from defects in material or workmanship for  
ninety (90) days after the return shipping date, or for the duration of the original  
warranty period, whichever is greater.  
This warranty does not cover the replacement of products damaged by abuse,  
accident, misuse or misapplication, nor as a result of service or modification other  
than by Socket.  
SOCKET IS NOT RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL  
DAMAGES RESULTING FROM BREACH OF ANY EXPRESS OR IMPLIED  
WARRANTY, INCLUDING DAMAGE TO PROPERTY AND, TO THE EXTENT  
PERMITTED BY LAW, DAMAGES FOR PERSONAL INJURY. THIS  
WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES INCLUDING  
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE.  
Some states do not allow limitation of implied warranties, or the exclusion or  
limitation of incidental or consequential damages, so that the above limitations or  
exclusions may not apply to you. This warranty gives you specific legal rights and  
you may also have other rights which vary from state to state.  
This product may contain fully tested, recycled parts, warranted as if new.  
For warranty information, phone (510) 744-2700.  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited Software Warranty  
LIMITED WARRANTY. SOCKET warrants that the original disk or CD ROM is  
free from defects for 90 days from the date of delivery of the SOFTWARE.  
CUSTOMER REMEDIES. SOCKET’S entire liability and your exclusive remedy  
shall be, at SOCKET’S option, either (a) return of the price paid or (b) replacement  
of the SOFTWARE which does not meet SOCKET’S Limited Warranty and which  
is returned to SOCKET with a copy of your receipt. Any replacement SOFTWARE  
will be warranted for the remainder of the original warranty period or 30 days,  
whichever is longer. THESE REMEDIES ARE NOT AVAILABLE OUTSIDE OF  
THE UNITED STATES OF AMERICA.  
NO OTHER WARRANTIES. SOCKET disclaims all other warranties, either  
express or implied, including but not limited to implied warranties of  
merchantability and fitness for a particular purpose, with respect to the SOFTWARE  
and the accompanying written materials. This limited warranty gives you specific  
legal rights. You may have others which vary from state to state.  
NO LIABILITY FOR CONSEQUENTIAL DAMAGES. In no event shall SOCKET  
or its suppliers be liable for any damages whatsoever (including, without limitation,  
damages for loss of business profits, business interruption, loss of business  
information, or other pecuniary loss) arising out of the use of or inability to use the  
SOFTWARE, even if SOCKET has been advised of the possibility of such damages.  
Because some states do not allow the exclusion or limitation of liability for  
consequential or incidental damages, the above limitation may not apply to you.  
EXPORT LAW ASSURANCES. You may not use or otherwise export or reexport  
the SOFTWARE except as authorized by United States law and laws of the  
jurisdiction in which the SOFTWARE was obtained. In particular, but without  
limitation, none of the SOFTWARE may be used or otherwise exported or  
reexported (a) into (or to a national or resident of) a United States embargoed  
country or (b) to anyone on the U.S. Treasury Department’s list of Specially  
Designated Nationals or the U.S. Department of Commerce’s Table of Denial  
Orders. By using the SOFTWARE, you represent and warrant that you are not  
located in, under control of, or a national or resident of any such country or on any  
such list.  
GOVERNMENT END USERS. If the SOFTWARE is supplied to the U. S.  
Government, the SOFTWARE is classified as “restricted computer software” as  
defined in clause 52.227-19 of the FAR. The U. S. Government ‘s rights to the  
SOFTWARE are as provided in clause 52.227-19 of the FAR.  
CONTROLLING LAW AND SEVERABILITY. This License shall be governed by  
the laws of the United States and the State of California. If for any reason a court of  
competent jurisdiction finds any provision, or portion thereof, to be unenforceable,  
the remainder of this License shall continue in full force and effect.  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
November 2002  
Document # 6410-00171 H  
Copyright Notice  
Copyright © 2002 Socket Communications, Inc. All rights reserved.  
Socket, the Socket logo and Mobility Friendly are registered trademarks of  
Socket Communications, Inc. Bluetooth Card is a trademark of Socket  
Communications, Inc. Bluetooth and the Bluetooth logos are trademarks  
owned by Bluetooth SIG, Inc., U.S.A. and licensed to Socket  
Communications, Inc. All other brand and product names are trademarks of  
their respective holders.  
The Bluetooth Card includes technology licensed under United States Patent  
Nos. 4,543,450, 4,603,320, 4,686,506, and 4,972,470.  
Reproduction of the contents of this manual without the permission of  
Socket Communications is expressly prohibited. Please be aware that the  
products described in this manual may change without notice.  
Feel free to contact SOCKET COMMUNICATIONS at:  
Socket Communications, Inc.  
37400 Central Court  
Newark, CA 94560  
Phone: (510) 744-2700  
Fax: (510) 744-2727  
Other than the above, Socket Communications can assume no responsibility  
for anything resulting from the application of information contained in this  
manual.  
Socket Communications requests that you refrain from any applications of  
the Socket Bluetooth Card that are not described in this manual. Socket  
Communications also requests that you refrain from disassembling the  
Bluetooth Card. Disassembly of this device will void the product warranty.  
You can track new product releases, software updates and technical  
bulletins by visiting Socket’s web page at: www.socketcom.com.  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Regulatory Compliance  
CompactFlash Card  
The Socket Bluetooth Card is designed to be compliant with the rules and  
regulations in locations where they are sold and will be labeled as required.  
This product is type approved — users are not required to obtain license or  
authorization before using.  
Radio Frequency Interference Requirements  
This device complies with part 15 of the FCC rules and Industry Canada  
RSS 210. Operation is subject to the following conditions: (1) This device  
may not cause harmful interference, and (2) this device must accept any  
interference received, including interference that may cause undesired  
operation.  
This equipment is also ETS EN300 328-2, ETS EN301 489-1 and ETS  
EN301 489-17 compliant. These limits are designed to provide reasonable  
protection against harmful interference when the equipment is operated in a  
commercial environment.  
This equipment generates, uses, and can radiate radio frequency energy and,  
if not installed and used in accordance with the instruction manual, may  
cause harmful interference to radio communications. Operation of this  
equipment in a residential area is likely to cause harmful interference, in  
which case the user will be required to correct the interference at his or her  
own expense.  
This equipment generates and radiates radio-frequency energy. To comply  
with FCC RF exposure compliance requirements, the following antenna  
installation and device operating configurations must be satisfied: (1) Users  
are not permitted to make changes or modify the system in any way, and (2)  
connecting external antennas to the card is prohibited. This device and its  
antenna must not be co-located or operated with any other antenna or  
transmitter.  
To comply with Industry Canada RF exposure compliance requirements, the  
following antenna installation and device operating configurations must be  
satisfied: “The installer of this radio equipment must ensure that the antenna  
is located or pointed such that it does not emit RF field in excess of Health  
Canada limits for the general population; consult Safety Code 6, obtainable  
from Health Canada’s website www.hc-sc.gc.ca/ehp/ehd/catalogue/rpb.htm”  
If this equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off and on, the  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
user may try to correct the interference by one or more of the following  
measures:  
Reorient or relocate the receiving antenna of the radio or television.  
Increase the distance separating the equipment and the receiver.  
Connect the equipment to an outlet on a different branch circuit than that  
of the receiver.  
Consult the dealer or an experienced radio/TV technician for help.  
The user may find the following booklet helpful: How to Identify and  
Resolve Radio-TV Interference Problems. This booklet is available from the  
U.S. Government Printing Office, Washington, D.C. 20402.  
Canada Certification  
The marking of “IC:xxxxxx-yyyyyy” on the Bluetooth card means:  
“xxxxxx-yyyyyy” is the certification number, and the term “IC’ before the  
equipment certification number only signifies that Industry Canada technical  
specifications were met.  
Radio Frequency Interference Requirements – Canada  
This Class B digital apparatus meets the requirements of the Canadian  
Interference-Causing Equipment Regulations. Cet appareil numérique de la  
Classe B respecte toutes les exigencies du Reglement sur le Matériel  
Brouilleur du Canada.  
NOTE: To comply with FCC and Industry Canada exposure requirements,  
this device is approved for operations in a user’s hand when there is a  
distance of 20 cm or more between the device antenna and the user’s body.  
CE Marking & European Union Compliance  
Products intended for sale within the European Union are marked with a  
CEMark which indicates compliance to applicable Directives and European  
Normes (EN), as follows. Amendments to these Directives or ENs are  
included: Normes (EN), as follows:  
Applicable Directives:  
Radio and Telecommunications Terminal Equipment Directive  
1999/5/EC  
Low Voltage Directive 73/23/EEC  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Applicable Standards:  
EN 55 022 – Limits and Methods of Measurement of Radio Interference  
Characteristics of Information Technology Equipment.  
EN 50 082-1 – Electromagnetic Compatibility – General Immunity  
Standard, Part 1: Residential, Commercial, Light Industry.  
IEC 801.2 – Electromagnetic Compatibility for Industrial Process  
Measurement and Control Equipment, Part 2: Electrostatic Discharge  
Requirements.  
IEC 801.3 – Electromagnetic Compatibility for Industrial Process  
Measurement and Control Equipment, Part 3: Radiated Electromagnetc  
Field Requirements.  
IEC 801.4 - Electromagnetic Compatibility for Industrial Process  
Measurement and Control Equipment, Part 4: Electrical Fast Transients  
Requirements.  
EN 60 950 + Amd 1 + Amd 2 – Safety of Information Technology  
Equipment Including Business Equipment.  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SDIO Card  
The Socket Bluetooth Card is designed to be compliant with the rules and  
regulations in locations where they are sold and will be labeled as required.  
This product is type approved — users are not required to obtain license or  
authorization before using.  
This product has been certified as conforming to technological standards.  
Therefore, the following actions are punishable by law:  
Disassembly or modification of this product.  
Removal of identification labels on the back of this product.  
The frequency used by this product is also used by industry, scientific and  
medical devices, such as microwave ovens, as well as wireless detectors for  
motion detectors, such as those requiring licenses used on manufacturing  
lines or similar radio transmitters. (all these wireless devices will be called  
“other wireless transmitters” below).  
1. Before using this system, confirm that other wireless transmitters are  
not in use nearby.  
2. In the unlikely event that there is electronic interference between this  
system and other wireless transmitters, quickly change the operating  
frequency of this system, change the location of operation, or stop  
operating the unit (cease signal transmission).  
3. If other electrical interference or related problems should occur, contact  
Socket technical support at +1-510-744-2720.  
Radio Frequency Interference Requirements (FCC)  
This device complies with part 15 of the FCC rules. Operation is subject to  
the following two conditions: (1) this device may not cause harmful  
interference, and (2) this device must accept any interference received,  
including interference that may cause undesired operation.  
CAUTION: Change or modification not expressly approved by the party  
responsible for compliance could void the user’s authority to operate this  
equipment.  
Radio Frequency Exposure Compliance:  
In order for this device to comply with FCC rules, under the provision of  
Part 15.247(b)(c), it must operate in a manner that ensures that the public is  
not exposed to radio frequency energy levels in excess of the Maximum  
Permissible Exposure (MPE) limits.  
It is recommended that the antenna of this device be placed at least 20 cm or  
more from its user and any nearby persons, during continuous and extended  
data transmission. The users of this device should ensure that the operation  
of this device is in compliance with these provisions.  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Radio Frequency Interference Requirements (Industry Canada)  
To prevent radio interference to the licensed service, this device is intended  
to be operated indoors and away from windows to provide maximum  
shielding. Equipment that is installed outdoors is subject to licensing.  
This equipment generates, uses, and can radiate radio frequency energy and,  
if not installed and used in accordance with the instruction manual, may  
cause harmful interference to radio communications. Operation of this  
equipment in a residential area is likely to cause harmful interference, in  
which case the user will be required to correct the interference at his or her  
own expense.  
Europe R&TTE Directive  
This equipment complies with the R&TTE directive 1999/5/EC and has  
been provided with the CE mark accordingly.  
Note that the radio frequency band used by this equipment has not been  
harmonized in all the EU.  
Applicable area (nation):  
Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland,  
Ireland, Italy, Luxembourg, Norway, Portugal, Spain, Sweden, Switzerland,  
The Netherlands, United Kingdom  
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printed in U.S.A.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Shibaura Lawn Mower ST330 User Manual
Shindaiwa Trimmer 81010 User Manual
Silicon Valley Peripherals Computer Drive SSD D0120PI 5000 User Manual
Sony Camcorder XC HR300 User Manual
Sony MiniDisc Player MZ E35 User Manual
Sony MP3 Player SRF 87 User Manual
Sony Projector VPL HS1 User Manual
Sterling Marine Battery SGFE User Manual
Swisher Lawn Mower WB11542F User Manual
Sylvania Flat Panel Television 6620LF4 User Manual