6
Steam Iron SDBK 2200 A1
Steam Iron
Operating instructions
KOMPERNASS GMBH
BURGSTRASSE 21 · D-44867 BOCHUM
ID-Nr.: SDBK2200A1-07/10-V2
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENT
PAGE
Intended Use
2
2
3
3
3
4
4
Safety instructions
Items supplied
Operating Elements
Before the First Use
Tips for utilisation
Operation
Filling with mains water....................................................................................................................4
Plugging in and ironing
Steam ironing
5
5
5
6
6
6
6
Ironing with steam blast
Temporarily setting the steam iron aside
Taking the steam iron out of service
Drip-Stop Function
Cleaning
Self-cleaning function .......................................................................................................................6
Housing .............................................................................................................................................7
Metal parts........................................................................................................................................7
Troubleshooting
Technical data
Disposal
7
7
7
7
8
Warranty and Service
Importer
Read these operating instructions carefully before using the appliance for the first time and preserve this
maual for later reference. Pass this manual on to whoever might acquire the appliance at a future date.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 1 -
STEAM IRON
• When ironing, use only the temperatures detailed in
the garment care instructions, or those suitable
for the material. Otherwise, you could damage
the textiles. Should care instructions not be given
or known, start with the lowest temperature
setting.
• NEVER permit children to use the steam iron.
• Place the station on a level and heat-resistent sur-
face. The station must be stable when you place
the steam iron onto it.
Intended Use
The steam iron is intended exclusively for the ironing
of textiles. The iron may only be used indoors and
in private households. All other use is deemed
improper use.
• If you want to put the steam iron down, simply
stand it on the cable base or place it in the sta-
tion.
Safety instructions
Risk of burns!
Risk of electrical shocks.
• The rating of the local power supply must tally
completely with the details given on the rating
plate of the appliance.
• To avoid potential risks, arrange for a defective
appliance to be checked and possibly repaired
by qualified technicians, or contact our Customer
Service Department.
• Arrange for defective power plugs and/or cables
to be replaced at once by qualified technicians
or our Customer Service Department.
• To disconnect from the power source, pull only
on the plug itself, not on the cable.
• Never bend (kink) or crush the power cable.
Arrange it in such a way that it cannot come into
contact with hot surfaces and so that no-one can
step on or trip over it.
• After every use, before cleaning and when re-
filling with water, remove the plug from the power
socket.
• Always unroll the power cable fully before switching
on and do not use an extension cable.
• Never touch the power cable or the power plug
with wet hands.
• Grasp the steam iron only by the handle when it
is hot.
• This appliance is not intended for use by individuals
(including children) with restricted physical, physio-
logical or intellectual abilities or deficiences in
experience and/or knowledge unless they are
supervised by a person responsible for their safety
or receive from this person instruction in how the
appliance is to be used.
• Children should be supervised to ensure that
they do not play with the appliance.
• Never hold your hand over the steam spray or
on hot metal parts.
• You should not open the filler opening of the
water reservoir while the iron is in use. First allow
the steam iron to cool down and remove the
plug from the power socket.
Risk of fire!
• Never leave the steam iron unattended when it
is hot or switched on.
• Put the steam iron into storage only when it has
cooled down completely.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 2 -
• Under no circumstances should you submerge
the steam iron in any liquid or permit liquids to
penetrate into the housing of the steam iron. Do
not expose the appliance to humidity and do not
use it outdoors. Should liquids enter the housing,
unplug the appliance from the power socket im-
mediately and arrange for it to be repaired by a
qualified technician.
Items supplied
Steam iron
Station
Cable base
Measuring beaker
Operating instructions
• Never use the steam iron adjacent to water
contained in a bath, shower, wash basin or other Operating Elements
vessels. The proximity of moisture presents a danger,
even when the appliance is switched off.
• You may not open the housing of the steam iron.
Permit only authorised technicians to repair a
defective appliance should repairs be necessary.
• Under no circumstances should you use the steam
iron if it bears visible signs of damage, has fallen
or leaks water. Arrange for it to be repaired by
qualified specialists.
1 Water jet
2 Filler opening for the water tank
3 Steam regulator
4 Button for fine water spray
5 Button for steam blast
6 Temperature control lamp
7 Temperature regulator
8 Cable base
9 Power cable
Attention!
• Should the clothing care instructions forbid ironing,
0 Unlocking switch
q Station
(Symbol
), the clothing item may not be ironed.
w Cable retainer
If you do so, the clothing item could be permanently
damaged.
e Ironing sole
r Self-clean button
• The water tank is to be filled exclusively with mains
or distilled water. You will otherwise damage the
steam iron.
• You may not clean the steam iron with solvents,
alcohol or abrasive cleaning agents. These
could damage it.
Before the First Use
• Remove the steam iron from the packaging.
• Remove all protective coverings and protective
foils from the steam iron and from the sole of the
iron e.
• Plastic bags can be dangerous. To avoid the
risks of asphyxiation, keep plastic bags out of
the reach of toddlers and small children.
• Pour water into the water tank (see chapter "Filling
with tap water").
• Connect the steam iron with the cable base 8
and with the station q (see chapter "Instructions
for Use").
• Insert the plug into a wall power socket supplying
an electrical current as detailed on the rating
plate.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 3 -
• Place the temperature regulator 7into the position
"MAX".
• Heat the steam iron up for several minutes at this
highest setting.
To reconnect the steam iron with the cable base 8:
• Insert the steam iron into the cable base 8
connected to the station q. Slide the unlocking
switch 0to
. You can now lift the steam
• Remove the steam iron from the station q
(see chapter “Tips for utilisation”).
iron with the cable base 8 from the station q.
• Press the button for the steam blast 5 a few times
such that steam exits from the soleplate e.
• Then iron a piece of material that is no longer
required, to remove possible contamination from
the sole of the iron e.
Should you wish to secure the steam iron to the
station q, for safekeeping for example, slide the un-
locking switch 0with the preplaced steam iron to
The steam iron can now no longer be removed from
.
the station q.
Tips for utilisation
Operation
In addition to the typical utilisation with a cable,
you can also separate the steam iron from the cable Filling with mains water
base 8 for a short period to iron textiles which are
• In a cooled condition, place the steam iron
not located close to an electrical power socket.
horizontally on its sole e.
• Slide off the cover of the filler opening for the
water tank 2.
• Using the measuring beaker, fill the water tank
with water to the "Max" marking, but no further.
• Slide the cover of the filler opening for the water
tank 2 back to close it.
To separate the steam iron from the cable base 8:
• Place the steam iron, with the cable base 8
engaged, onto the station q. The unlocking
switch 0 must be in the position
.
• Slide the unlocking switch 0 into the
position
. The steam iron now allows itself
to be lifted off. The cable base 8 remains
combined with the station q.
Note
Should the mains water at your locality be rated as
hard, it is recommended that you mix mains water
with some distilled water. Otherwise, the jets for the
steam blast function could calcify (become blocked)
prematurely.
To extend the optimal steam blast function, mix
mains water with distilled water according to the
table.
Note:
As the steam iron cannot be heated up without the
cable base 8, you can only work for a short period
without the cable base 8. Reconnect the steam iron
with the cable base 8 as soon as the steam blast
or the ironing quality diminishes.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 4 -
Symbol
Temperature
Ratios - distilled
Water hardness
very soft / soft
medium
water to mains water
Type of Material
Acrylic, rayon
regulator
a
0
1: 1
2: 1
3: 1
Silk, wool, polyester
blended fabrics
hard
Cotton, linen, viscose
very hard
• Select the best suitable temperature setting with
The water hardness level can be queried at your
local water works.
the temperature controller 7.
The control lamp for the temperature 6 glows.
When the set temperature has been reached, the
temperature control lamp 6 goes out.
Plugging in and ironing
Dry ironing without steam is possible at all temperatures,
steam ironing is first possible from the adjustment
• Wait until the temperature control lamp 6
extinguishes.
range
on the temperature regulator 7.
• To moisten the laundry, press the spray button 4.
• Insert the plug into a power socket.
This function is suitable for very dry and very crumpled
garments.
Attention!
Should the clothing care instructions forbid ironing,
(Symbol
), the clothing item may not be ironed.
Steam ironing
If you do so, the clothing item could be permanently
damaged.
• Programme the steam regulator 3 to the desired
steam setting.
• Check the care instructions on the labels in the
garment to see if it is suitable for being ironed,
and at which temperature setting.
• The temperature regulator 7 must be turned into
at least the adjustment range
cannot produce any steam.
. Otherwise it
Ironing with steam blast
The steam blast is especially suitable for smoothing
difficult to reach parts of a garment.
• Slightly raise the steam iron.
• For a steam blast, press the steam blast button
5.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 5 -
Temporarily setting the steam
iron aside
Drip-Stop Function
With conventional steam irons it can happen that
water drips from the iron sole eat low temperatures.
This iron however possesses a new equipment charac-
teristic, the DRIP-STOP function. At low temperatures
the iron automatically switches off the steam-blast
function. When this happens, a “CLICK” is to be
heard. You must then re-set a suitable temperature
with the temperature controller 7. As soon as this
is reached, steam production is continued.
Risk of fire!
Never leave the steam iron unattended when it is
hot or switched on.
• Place the temperature regulator 7 into the
position "MIN".
• Place the steam iron only on the cable base 8
or insert it onto the station q.
Cleaning
Taking the steam iron out of
service
Self-cleaning function
• Remove the plug from the wall power socket.
• Empty the water tank and clean the sole of the
iron e.
• Place the cooled down steam iron on the station q
and secure it, in that you slide the unlocking
• Connect the steam iron with the cable base 8.
• Fill the water tank to the marking MAX.
• Insert the plug into a wall socket.
• Place the temperature regulator 7 into the
position MAX.
switch 0 into the position
.
• Adjust the steam regulator 3 to maximum steam
power.
• Allow the steam iron to heat up until the heat
control lamp 6 extinguishes and once again
glows.
• The power cable 9 can be wrapped and stored
around the cable retainer w on the underside of
the station q:
• Hold the steam iron horizontally over a catchment
receptacle.
• Position the steam regulator 3 at the maximal
steam power level. Press and hold down the
button Self-clean r. Thereby, steam and boiling
water flows from the steam exit holes in the sole
of the iron e. Impurities that may be present are
washed out.
• Release the Self-clean button r as soon as all
of the water has exited.
• Thoroughly dry the sole of the iron e. For this,
slide the sole of the iron e back and forth over
a hand towel or an old piece of material several
times.
• Allow the steam iron to cool down before placing
it in storage.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 6 -
Housing
Risk of personal injury!
ALWAYS remove the plug before cleaning the ap-
pliance. There is a danger of electric shock! Allow
the appliance to cool down. Risk of Burns!
Disposal
Do not dispose of the appliance in your
normal domestic waste. This appliance
is subject to the provisions of European
Directive 2002/96/EC.
• Clean the housing with a soft, dry cloth only.
Dispose of the appliance through an approved dis-
posal centre or at your community waste facility.
Observe the currently applicable regulations. In
case of doubt, please contact your waste disposal
centre.
Important!
Do not use aggressive, abrasive or chemical cleaning
agents. These could attack the surfaces and cause
irreparable damage to the appliance.
Dispose of all packaging materials in an
environmentally friendly manner.
Metal parts
• Clean the metal components with a lightly water-
moistened cloth and a mild, non-abrasive cleaning
agent.
Warranty and Service
The warranty for this appliance is for 3 years from
the date of purchase. The appliance has been ma-
nufactured with care and meticulously examined be-
fore delivery. Please retain your receipt as proof of
purchase. In the event of a warranty claim, please
make contact by telephone with our Service Depart-
ment. Only in this way can a post-free despatch for
your goods be assured.
The warranty covers only claims for material and
manufacturing defects, but not for transport dama-
ge, for wearing parts or for damage to fragile com-
ponents, e.g. buttons or batteries. This product is for
private use only and is not intended for commercial
use. The warranty is void in the case of abusive and
improper handling, use of force and internal tampe-
ring not carried out by our authorized service
branch. Your statutory rights are not restricted in
any way by this warranty.
Troubleshooting
The steam iron blows out no or very little
steam:
The reserves of water in the steam iron are depleted.
Fill the water tank with mains water (See "Filling with
mains water").
The steam iron does not get hot:
The steam iron is not plugged in or is not switched
on. Insert the plug into a wall power socket and
adjust the temperature regulator 7 to the desired
ironing temperature.
The steam iron is defect. Arrange for the steam iron
to be repaired by qualified specialists.
Technical data
Power Supply Voltage:
max. power consumption: 2200 W
220 - 240 V /50 Hz
~
Download from Www.Somanuals.com. All Manuals Search And Download.
- 7 -
The warranty period will not be extended by repairs Importer
made under warranty. This applies also to replaced
and repaired parts. Any damage and defects extant
on purchase must be reported immediately after un-
packing the appliance, at the latest, two days after
the purchase date. Repairs made after the expira-
tion of the warranty period are subject to payment.
KOMPERNASS GMBH
BURGSTRASSE 21
44867 BOCHUM, GERMANY
DES UK LTD
Tel.: 0871 5000 700 (£ 0.10 / minute)
e-mail: [email protected]
Kompernass Service Ireland
Tel.: 1850 930 412 (0,082 EUR/Min.)
Standard call rates apply. Mobile operators may vary.
e-mail: [email protected]
Download from Www.Somanuals.com. All Manuals Search And Download.
- 8 -
|