Thank you for purchasing this SHARP product.
To obtain the best performance from this product, please read this
manual carefully. It will guide you in operating your SHARP product.
XL-UH2080H Micro component system consisting of XL-UH2080H (main unit)
and CP-UH2080H (speaker system).
MICRO COMPONENT SYSTEM
MODEL
XL-UH2080H
OPERATION MANUAL
I
Note:
This product is not compatible with MTP and AAC file systems.
SHARP CORPORATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Note
Contents
XL-UH2080H
Supply of this product does not convey a license nor imply any right
to distribute content created with this product in revenue-generating
broadcast systems (terrestrial, satellite, cable and/or other
distribution channels), revenue-generating streaming applications
(via Internet, intranets and/or other networks), other revenue-
generating content distribution systems (pay-audio or audio-on-
demand applications and the like) or on revenue-generating physical
media (compact discs, digital versatile discs, semiconductor chips,
hard drives, memory cards and the like). An independent license for
MPEG Layer-3 audio coding technology licensed from Fraunhofer
IIS and Thomson.
Page
„ General Information
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 - 7
„ Preparation for Use
System connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 - 10
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
„ Basic Operation
General control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Setting the clock (Remote Control only) . . . . . . . . . . . . . . . . . 13
Accessories
Please confirm that only the following accessories are included.
„ CD or MP3/WMA disc Playback
Listening to a CD or MP3/WMA disc . . . . . . . . . . . . . . . . .14 - 15
Advanced CD or MP3/WMA disc playback . . . . . . . . . . . .16 - 18
MP3/WMA folder mode (only for MP3/WMA files) . . . . . . .18 - 20
Remote control
1
AM loop aerial
1
„ USB Memory Playback
Listening to USB mass storage device / MP3 Player . . . .20 - 21
To remove USB memory device . . . . . . . . . . . . . . . . . . . . . . . . 22
Advanced USB playback . . . . . . . . . . . . . . . . . . . . . . . . . . .22 - 23
„ Radio
FM aerial
1
“AA” size battery (UM/SUM-3,
R6, HP-7 or similar)
Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 - 25
2
„ Advanced Features
Using the Radio Data System (RDS) . . . . . . . . . . . . . . . . .25 - 30
Timer and sleep operation (Remote Control only) . . . . . .30 - 33
Enhancing your system . . . . . . . . . . . . . . . . . . . . . . . . . . .34 - 35
„ References
Troubleshooting chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 - 37
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 - 38
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
XL-UH2080H
„ General
z Hold the AC power plug by the head when
removing it from the wall socket, as pulling
the lead can damage internal wires.
z The AC power plug is used as a disconnect
device and shall always remain readily
operable.
z Please ensure that the equipment is positioned in a well-ventilated
area and ensure that there is at least 10 cm (4") of free space
along the sides, top and back of the equipment.
10 cm (4") 10 cm (4")
10 cm (4")
z Do not remove the outer cover, as
this may result in electric shock.
Refer service to your local SHARP
service facility.
10 cm (4")
z Use the unit on a firm, level surface free from
vibration.
z The ventilation should not be impeded by covering the ventilation
openings with items, such as newspapers, tablecloths, curtains,
etc.
z No naked flame sources, such as lighted candles, should be
placed on the apparatus.
z Attention should be drawn to the environmental aspects of battery
disposal.
z Keep the unit away from direct sunlight,
strong magnetic fields, excessive dust,
humidity and electronic/electrical
equipment (home computers, facsimiles,
etc.) which generate electrical noise.
z This unit should only be used within the range of 5°C - 35°C
(41°F - 95°F).
Warning:
The voltage used must be the same as that specified on this unit.
Using this product with a higher voltage other than that which is
specified is dangerous and may result in a fire or other type of
accident causing damage. SHARP will not be held responsible for
any damage resulting from use of this unit with a voltage other than
that which is specified.
z Do not place anything on top of the unit.
z Do not expose the unit to moisture, to temperatures higher than
60°C (140°F) or to extremely low temperatures.
z If your system does not work properly, disconnect the AC power
lead from the wall socket. Plug the AC power lead back in, and
then turn on your system.
z In case of an electrical storm, unplug the
unit for safety.
„ Volume control
The sound level at a given volume setting depends on speaker
efficiency, location, and various other factors. It is advisable to avoid
exposure to high volume levels. Do not turn the volume on to full at
switch on. Listen to music at moderate levels. Excessive sound
pressure from earphones and headphones can cause hearing loss.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and indicators
XL-UH2080H
„ Front panel
Reference page
1. Disc Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2. On/Stand-by Button . . . . . . . . . . . . . . . . . . 12, 13, 14, 24, 32
3. Disc Tray Open/Close Button . . . . . . . . . . . . . . . . . . . . . . . 14
4. Timer Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
5. Disc or USB Play or Pause Button . . . . . . . . . . . . . . . . 15, 16
6. Disc Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 17
7. Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
8. Audio In Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
9. Headphones Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
10. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
11. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
12. Remote Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
13. Audio In Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
14. USB Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
15. USB Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
10
11
12
13
14
15
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and indicators (continued)
XL-UH2080H
„ Display
Reference page
1
2
3
4 5 6 7 8 9 10
1. MP3/WMA Folder Indicator . . . . . . . . . . . . . . . . . . . . . . 19, 21
2. MP3/WMA Title Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . 20
3. MP3 Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4. WMA Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
5. RDS Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 26
6. Traffic Announcement Indicator . . . . . . . . . . . . . . . . . . . . . 25
7. Dynamic PTY Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
8. Traffic Programme Indicator . . . . . . . . . . . . . . . . . . . . . . . . 25
9. Sleep Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
10. Timer Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
11. MP3/WMA Total Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 21
12. Daily Timer Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
13. FM Stereo Mode Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 24
14. FM Stereo Receiving Indicator . . . . . . . . . . . . . . . . . . . . . . 24
15. Memory Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
16. Extra Bass Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
17. Disc or USB Repeat Play Indicator . . . . . . . . . . . . . . . . . . . 16
18. Disc or USB Pause Indicator . . . . . . . . . . . . . . . . . . . . . . . . 15
19. Disc or USB Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . 15
16 17
12 1314
15
11
18
19
3
4
„ Rear panel
Reference page
1. Speaker Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2. AC Power Lead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3. FM 75 Ohms Aerial Socket . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4. AM Aerial Earth Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5. AM Loop Aerial Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
6. Subwoofer Pre-output Socket . . . . . . . . . . . . . . . . . . . . . . . 35
5
„ Speaker system
1. Tweeter
1
2. Woofer
3. Bass Reflex Duct
4. Speaker Wire
3
1
2
6
2
4
6
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-UH2080H
„ Remote control
1
Reference page
1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . 11
2. Clock/Timer Button . . . . . . . . . . . . . . . . . . . . . . 13, 31, 32, 33
3. Direct Search Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4. Equaliser Mode Select Button . . . . . . . . . . . . . . . . . . . . . . 12
5. Extra Bass/Demo Button . . . . . . . . . . . . . . . . . . . . . . . . 10, 12
6. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
7. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
8. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . 23, 24, 25, 26
9. Audio In/USB Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 34
10. MP3/WMA Folder Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
11. MP3/WMA Display Button . . . . . . . . . . . . . . . . . . . . . . . . . . 21
12. Volume Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . . 12
13. Clear/Dimmer Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 18
14. Play Mode Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 17
15. Disc Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15, 17
16. USB Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
17. Memory Button . . . . . . . . . . . . . . . . 13, 17, 24, 27, 31, 32, 33
18. Disc Play or Pause Button . . . . . . . . . . . . . . . . 14, 15, 16, 20
19. USB Play or Pause Button . . . . . . . . . . . . . . . . . . . 15, 17, 21
20. Tuning Up, Folder Up Button. . . . . . . . . . . . . . . . . . . . . . . . 24
21. Track Up or Fast Forward, Tuner Preset Up, Time Up Button
. . . . . . . . . . . . . . . . . . . . . . . . 13, 15, 19, 20, 22, 25, 31, 32, 33
22. Track Down or Fast Reverse, Tuner Preset Down, Time
Down Button . . . . . . . . . . . . 13, 15, 19, 20, 22, 25, 31, 32, 33
23. Tuning Down, Folder Down Button . . . . . . . . . . . . . . . . . . 24
24. RDS ASPM Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
25. RDS PTY Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
26. RDS Display Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
17
18
13
14
15
6
7
8
16
19
21
9
20
10
11
2
3
22
23
12
4
5
24 25
26
7
Download from Www.Somanuals.com. All Manuals Search And Download.
System connections
XL-UH2080H
Make sure to unplug the AC power lead before making any connections
„ Aerial connection (see page 9)
AM loop aerial
FM aerial
Right speaker
Left speaker
„ Speaker connection (see page 9)
Wall socket
(AC 220 - 240V ~ 50Hz)
„ AC power connection (see page 10)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-UH2080H
„ Aerial connection
„ Speaker connection
Connect the black wire to the minus (–) terminal, and the red wire to
the plus (+) terminal.
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS socket and position
the FM aerial wire in the direction where the strongest signal can be
received.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM and GND (Earth) terminals.
Position the AM loop aerial for optimum reception. Place the AM loop
aerial on a shelf, etc., or attach it to a stand or a wall with screws (not
supplied).
Red
Black
Caution:
z Use speakers with an impedance of 4 ohms or more, as lower
impedance speakers can damage the unit.
z Do not mistake the right and the left
channels. The right speaker is the one on the
right side when you face the unit.
z Do not let the bare speaker wires touch
each other.
z Do not allow any objects to fall into or to be
placed in the bass reflex ducts.
Note:
z Do not stand or sit on the speakers. You may
be injured.
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better reception.
Incorrect
Installing the AM loop aerial:
< Assembling >
< Attaching to the wall >
Wall Screws (not supplied)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
System connections (continued)
XL-UH2080H
„ AC power connection
After checking all the connections have been made correctly, plug
the AC power lead of this unit into the wall socket. If you plug in the
unit first, the unit will enter the demonstration mode.
„ External FM aerial
Use an external FM aerial if you require better reception.
Consult your dealer.
External FM
aerial
75 ohms
coaxial cable
Wall socket
(AC 220 - 240V ~ 50Hz)
Note:
When an external FM aerial is used, disconnect the supplied FM
aerial wire.
Note:
Unplug the AC power lead from the wall socket if the unit will not be
in use for a prolonged period of time.
„ Demonstration mode
The first time the unit is plugged in, the
unit will enter the demonstration mode.
You will see words scroll.
To cancel the demonstration mode:
When the unit is in the power
stand-by mode (demonstration
mode), press the X-BASS/DEMO
button on the remote control. The
unit will enter the low power
consumption mode.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the
X-BASS/DEMO button on the remote control again.
Note:
When the power is on, the X-BASS/DEMO button can be used to
select the extra bass mode.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
XL-UH2080H
Notes concerning use:
„ Battery installation
z Replace the batteries if the operating distance is reduced or if the
operation becomes erratic. Purchase 2 “AA” size batteries
(UM/SUM-3, R6, HP-7 or similar).
1
Open the battery cover.
2
Insert the supplied batteries according to the direction
indicated in the battery compartment.
When inserting or removing the batteries, push them towards the
battery terminals.
z Periodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
z Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit if this
occurs.
3
Close the cover.
z Keep the remote control away from moisture, heat, shock, and
vibrations.
„ Test of the remote control
Check the remote control after checking all the connections (see
pages 8 - 10).
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you
can enjoy the music.
Precautions for battery use:
z Replace all old batteries with new ones at the same time.
z Do not mix old and new batteries.
z Remove the batteries if the unit will not be used for long periods
of time. This will prevent potential damage due to battery leakage.
Remote sensor
Caution:
z Do not use rechargeable batteries (nickel-cadmium battery, etc.).
z Installing the batteries incorrectly may cause the unit to
malfunction.
z Batteries (battery pack or batteries installed) shall not be exposed
to excessive heat such as sunshine, fire or the like.
0.2 m - 6 m
(8" - 20’)
Battery removal:
Open the battery cover and pull up the battery to take out.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
General control
XL-UH2080H
„ Volume control
Main unit operation:
When the VOLUME control is turned clockwise, the volume will
increase. When it is turned anti-clockwise, the volume will decrease.
Remote control operation:
Press the VOLUME (+ or –) button to increase or decrease the volume.
.....
0
30 MAXIMUM
„ Bass control
When the power is first turned on, the unit will enter the extra bass
mode which emphasises the bass frequencies, and “X-BASS” will
appear. To cancel the extra bass mode, press the X-BASS/DEMO
button on the remote control
.
„ To turn the power on
Press the ON/STAND-BY button to turn the power on.
„ Equaliser
After use:
When the EQUALIZER MODE button is pressed, the current mode
setting will be displayed. To change to a different mode, press the
EQUALIZER MODE button repeatedly until the desired sound mode
appears.
Press the ON/STAND-BY button to enter the power stand-by mode.
„ Illumination light control
Equaliser off
FLAT
ROCK
When the unit’s power is turned on, the ring around the volume
control lights up. To turn on/off the light, hold down the
CLEAR/DIMMER button on the remote control for more than 2
seconds.
For rock music
For classical music
For pop music
CLASSIC
POPS
„ Volume auto fade-in
If you turn off and on the main unit with the volume set to 27 or
higher, the volume starts at 16 and fades in to the last set level.
Vocals are enhanced
For jazz
VOCAL
JAZZ
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the clock (Remote Control only)
XL-UH2080H
5 Press the
or
button to adjust the hour and
then press the MEMORY button.
Press the
or
button once to advance the time by
1 hour. Hold it down to advance continuously.
6 Press the
or
button to adjust the minutes and
then press the MEMORY button.
In this example, the clock is set for the 24-hour (0:00) display.
Press the
or
button once to advance the time by
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CLOCK/TIMER button.
1 minute. Hold it down to change the time in 5-minute intervals.
To confirm the time display:
[When the unit is in the stand-by mode]
Press the CLOCK/TIMER button.
3 Within 10 seconds, press the
or
button to
select “CLOCK”, and press the MEMORY button.
The time display will appear for about 10 seconds.
[When the power is on]
Press the CLOCK/TIMER button.
Within 10 seconds, press the
time.
or
button to display the
The time display will appear for about 10 seconds.
4 Press the
or
button to select 24-hour or 12-
hour display and then press the MEMORY button.
Note:
The “CLOCK” will appear or time will flash to confirm the time
display when the AC power supply is restored after a power failure
or unplugging the unit. If incorrect, readjust the clock as follows.
To readjust the clock:
The 24-hour display will appear.
(0:00 - 23:59)
“0:00”
“AM 12:00”
“AM 0:00”
Perform “Setting the clock” from step 1. If the “CLOCK” does not
appear in step 3, step 4 (for selecting the 24-hour or 12-hour
display) will be skipped.
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
To change the 24-hour or 12-hour display:
1
Clear all the programmed contents. [Refer to “Factory reset,
The 12-hour display will appear.
(AM 0:00 - PM 11:59)
clearing all memory” on page 36 for details.]
2
Perform “Setting the clock” from step 1 onwards.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to a CD or MP3/WMA disc
XL-UH2080H
This system can play back a standard CD, CD-R/RW in the CD format
and CD-R/RW with MP3 or WMA files, but cannot record on them.
Some audio CD-R and CD-RW discs may not be playable due to the
state of the disc or the device that was used for recording.
MP3:
MP3 is a form of compression. It is an acronym which stands
for MPEG Audio Layer 3.
MP3 is a type of audio code which is processed by significant
compression from the original audio source with very little loss
in sound quality.
z This system supports MPEG 1 Layer 3, MPEG 2 Layer 3, and
VBR files.
z During VBR file playback, time counter in the display may differ
from its actual playback time.
z Bitrate which is supported by MP3 is 32 ~ 320 kbps.
WMA:
WMA files are Advanced System Format files that include audio
files which are compressed with Windows Media Audio codec.
WMA is developed by Microsoft as an audio format file for
Windows Media Player.
z “MP3” and “WMA” indicator will light up after the unit reads
information on an MP3 or WMA disc.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button.
3 Press the OPEN/CLOSE button to open the disc tray.
z Bitrate which is supported by WMA is 64 ~ 160 kbps.
4 Place the disc on the disc tray, label side up.
Auto power on function:
Be sure to place 8 cm (3") disc in the middle of the disc tray.
When you press any of the following buttons, the unit turns on.
z CD button (main unit and remote control): The unit turns on and
the “CD” function is activated.
z CD
playback starts (regardless of the last function).
button on the main unit: The unit turns on and playback of
the last function starts (CD, TUNER, AUDIO IN, USB).
/
button on the remote control: The unit turns on and CD
12 cm (5")
8 cm (3")
z
/
Auto power off function:
In the stop mode of CD, MP3 or WMA operation, the main unit enters
the stand-by mode after 15 minutes of inactivity.
Continued to the next page
14
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-UH2080H
„ Various disc functions
5 Press the OPEN/CLOSE button to close the disc tray.
Function Main unit
Remote
control
Operation
MP3 indicator
Total
WMA indicator
Indicator
Play
Press in the stop mode.
[CD]
[MP3/WMA]
Stop
Press in the playback
mode.
Total number of
tracks on the disc
Total playing time Total number
of the disc
of files
z Due to the structure of the disc information, it takes longer to
read an MP3/WMA disc than a normal CD (approximately 20
to 90 seconds).
Pause
Press in the playback
mode. Press the
button to resume
playback from the
paused point.
/
6 Press the
/
button to start playback.
Track up/
Track
down
Press in the playback or
stop mode.
PRESET
Disc play indicator
If you press the button in
the stop mode, press the
z After the last track is played, the unit will stop automatically.
/
button to start the
To remove the discs:
desired track.
In the stop mode, press the OPEN/CLOSE button.
Fast
Press and hold down in
the playback mode.
PRESET
forward/
Fast
Caution:
z Do not place two discs in one disc tray.
z Do not play discs of special shapes (heart, octagon, etc).
It may cause malfunctions.
Release the button to
resume playback.
reverse
z Do not push the disc tray whilst it is moving.
z If the power fails whilst the tray is open, wait until the power is
restored.
z If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
Notes for CD or MP3/WMA disc:
z When the end of the last track is reached during fast forward,
“END” will appear on the display and CD operation will be paused.
When the beginning of the first track is reached during fast
reverse, the unit will enter the playback mode.
z Rewritable multi-session discs with unfinished writing, can still be
played.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced CD or MP3/WMA disc playback
XL-UH2080H
„ Direct track search
By using the direct search buttons, the desired tracks on the current
disc can be played.
„ Repeat play
Repeat play can play one track, all tracks or a programmed
sequence continuously.
Use the direct search buttons on
the remote control to select the
desired track whilst playing the
selected disc.
To repeat one track:
Press the PLAY MODE button once.
Press the
/
button.
To repeat all tracks:
Selected track number
Press the PLAY MODE button twice.
Press the
/
button.
z The direct search buttons allow you to select up to number 9.
z When selecting number 10 or higher, use the “+10” button.
To repeat desired tracks :
Perform steps 1 - 6 in “Programmed play” section on page 19 and
then press the PLAY MODE button once.
A. For example, to choose 13
1 Press the “+10” button once.
2 Press the “1” button.
Press the
/
button.
3 Press the “3” button.
B. For example, to choose 130
1 Press the “+10” button twice.
2 Press the “1” button.
To cancel repeat play:
Press the PLAY MODE button again until “ ” disappears.
3 Press the “3” button.
4 Press the “0” button.
Notes:
z A track number higher than the number of tracks on the disc
cannot be selected.
z During random play, direct search is not possible.
To stop playback:
Press the (CD ) button.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-UH2080H
„ Random play
The tracks on the disc can be played in random order automatically.
„ Programmed play
You can choose up to 32 selections for playback in the order you like.
To random play all tracks:
Press and hold down PLAY MODE button on the remote control.
1 Whilst in the stop mode, press
the MEMORY button on the
remote control to enter the
programming save mode.
Press the
/
button.
2 Press the direct search buttons
on the remote control to select
the desired track.
Selected track number
To cancel random play:
Press the PLAY MODE button.
“R” will disappear.
You can also select a track by pressing the
or
button.
3 Press the MEMORY button to
save the track number.
Notes:
4 Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be
programmed.
z If you press the
button during random play, you can move to
the track selected next by the random operation. On the other
hand, the
button does not allow you to move to the previous
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR/DIMMER button.
track. The beginning of the track being played will be located.
z In random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)
5 Press the (CD ) button.
The total number in memory will
appear.
Caution:
After performing repeat or random play, be sure to press the
(CD ) button. Otherwise, the disc will play continuously.
6 Press the
/
button to start playback.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3/WMA folder mode (only for
MP3/WMA files)
Advanced CD or MP3/WMA disc
playback (continued)
XL-UH2080H
To clear the programmed selections:
Press the CLEAR/DIMMER button on the
remote control whilst the “MEMORY”
indicator is flashing.
Each time the button is pressed, one track will
be cleared, beginning with the last track
programmed.
To play back MP3/WMA (Windows Media Audio) file
There are many music sites on the internet that you can download
MP3/WMA (Windows Media Audio) music files. Follow the
instructions from the website on how to download the music files.
You can then play back these downloaded music files by burning
them to a CD-R/RW disc.
z Your downloaded song/files are for personal use only. Any other
usage of the song without owner’s permission, is against the law.
To cancel the programmed play mode:
Whilst in the stop mode and the “MEMORY” indicator is lit, press the
CLEAR/DIMMER button on the remote control. The “MEMORY”
indicator will disappear and all the programmed contents will be
cleared.
„
About folder playback order
If MP3/WMA files are recorded in several folders, a folder number will
be set to each folder automatically.
These folders can be selected by the FOLDER button on the remote
control. If there is no supported file formats inside the selected folder,
the folder is skipped and the next folder will be selected.
Example: How to set folder number if MP3/WMA format files are
recorded as below figure.
Adding tracks to the programme:
If a programme has been previously stored, the “MEMORY” indicator
will be displayed. Then follow steps 1 - 6 to add tracks. The new
tracks will be stored after the last track of the previous programme.
To check which tracks are programmed:
Whilst the unit is stopped in the programmed play mode, press the
1. ROOT folder is set as folder 1.
2. As for folders inside ROOT folder (Folder A and Folder B), the
folder which is recorded earlier on the disc will be set as folder 2
and folder 3.
or
button.
MP3/WMA folder programmed:
3. As for folder inside Folder A (Folder C and Folder D), the folder
which is recorded earlier on the disc will be set as folder 4 and
folder 5.
Only tracks in the same folder can be select. Select which folder to
be progammed before entering programme mode. (refer page 20 to
select folder)
4. Folder E that is inside Folder D will be set as folder 6.
Notes:
z The folder and file order information which is recorded on the disc
depends on the writing software. There maybe possibilities that
this unit will playback the files not according to our expected
playback order.
z For CD MP3/WMA, 512 numbers of folders and files inclusives of
the folders which have non playable files can be read.
z When a disc ejected, the programme is automatically cancelled.
z Even if you press the ON/STAND-BY button to enter the stand-by
mode or change the function from CD to another, the programmed
selections will not be cleared.
z During the programme operation, random play is not possible.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-UH2080H
„ Procedure to play back MP3/WMA disc with
folder mode on
To play back CD-R/RW.
1 Press the CD button, and load an MP3/WMA disc.
z
After disc is loaded, disc info will be displayed.
MP3 Indicator
WMA Indicator
Disc Name
Folder mode on/off can be operated by the FOLDER button on the
remote control. Files that are played when folder mode is set to the
on position, may differ from those played back when folder mode is
turned off.
TOTAL Indicator
Total number of files
2 Press the FOLDER button, and press the TUNING ( or
Folder Mode Off case:
) button to select desired playback folder. (Folder mode
on)
All the files starting from the selected file will be played back. If file 3
inside Folder C is selected, all the files starting from file 3 will be
played back until file 10 of Folder E.
FOLDER Indicator
Folder Mode On case:
All the files inside the selected folder will be played back.
In case Folder D is selected, file 6, 7 and 8 will be played back. File
9 and 10 in Folder E will not be played back.
FOLDER Number
Total files in Folder 3
FILE 3
FILE 4
FILE 5
ROOT
(FOLDER 1)
FOLDER A
(FOLDER 2)
FOLDER C
(FOLDER 4)
3 Select desired file to be played back by pressing the
or button.
FOLDER D
(FOLDER 5)
FILE 6
FILE 7
FILE 8
FOLDER E
(FOLDER 6)
FILE 9
FILE 10
FOLDER B
(FOLDER 3)
FILE 1
FILE 2
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to USB mass storage
device / MP3 Player
MP3/WMA folder mode (only for MP3/
WMA files) (continued)
XL-UH2080H
4
Press the
/
(CD
/
) button.
Playback will start and file name will be displayed.
z
z
Title, Artist & Album name are displayed if they are recorded on
the disc.
Display content can be changed by pressing the DISPLAY
button.
TITLE-1 Indicator
Title Display
Artist Display
Album Display
File Name Display
Note:
This product is not compatible with MTP and AAC file systems.
TITLE-1 Indicator
TITLE-1 Indicator
Function Display
„
To play back USB/MP3 Player with Folder mode off
1 Press the USB button, and push up the USB door. Connect
the USB Memory device that has MP3/WMA format files on
the unit.
(
)
Clock Display
In case of playback with the folder mode on, press the TUNING (
or
)
button, and the folder can be selected even though it is in
playback/pause mode.
When the USB memory is connected to the main unit, the
device information will be displayed.
It will continue playback/pause mode in the 1st track of the
selected folder.
(
)
Only appears when clock is already set.
MP3 indicator
WMA indicator
Volume ID
Note:
If “NO SUPPORT” is displayed, it means “Copyright protected
WMA file” or “Not supported playback file” is selected.
TOTAL indicator
Total number of files
2 Select desired file to be played back by pressing the
button.
or
20
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-UH2080H
3
Press the
/
(USB
/
) button.
2 Press the FOLDER button, and press the TUNING ( or
button to select desiredplayback folder.
)
Playback will start and the file name will be displayed.
z Title, Artist & Album name are displayed if they are recorded in
FOLDER indicator
the USB memory device.
Display content can be changed by pressing the DISPLAY button.
z
TITLE-1 Indicator
File Name Display
Title Display
FOLDER number
Total files in Folder 2
z To start playback with folder mode on, go to step 4.
z To change the playback folder, press the TUNING ( or
button to select another folder.
)
TITLE-2 Indicator
TITLE-3 Indicator
Function Display
Artist Display
3 Select desired file to be played back by pressing the
button.
or
4
Press the
/
(USB
/
) button.
(
)
Clock Display
Album Display
Playback will start and the file name will be displayed.
z Title, Artist & Album name are displayed if they are recorded in
the USB memory device.
Display content can be changed by pressing the DISPLAY button.
z
TITLE-1 Indicator
(
) Only appears when clock is already set.
File Name Display
Title Display
Note:
To pause playback:
Press the USB
Auto power off function:
/
button.
TITLE-2 Indicator
Function Display
Artist Display
In the stop mode of USB operation, the main unit enters the stand-by
mode after 15 minutes of inactivity.
„
To play back USB/MP3 Player with Folder mode on
(
)
TITLE-3 Indicator
Clock Display
Album Display
1 Press the AUDIO IN/USB (USB) button, and push up the
USB door. Connect the USB Memory device that has MP3/
WMA format files on the unit.
When the USB memory is connected to the main unit, the
device information will be displayed.
(
) Only appears when clock is already set.
Note:
To pause playback:
Press the USB
MP3 indicator
WMA indicator
Volume ID
/
button.
Auto power off function:
TOTAL indicator
In the stop mode of USB operation, the main unit enters the stand-by
mode after 15 minutes of inactivity.
Total number of files
21
Download from Www.Somanuals.com. All Manuals Search And Download.
To remove USB memory device
Advanced USB playback
XL-UH2080H
„ Repeat play
1 Press the USB button to stop playback. Then press the
Repeat play can play all tracks sequence continuously.
USB
button again and wait until “UNPLUG OK” is
displayed.
To repeat all tracks:
Press the PLAY MODE button.
Press the
/
button.
Always remove the USB memory device after “UNPLUG OK” appears
on the display. Improper removal of the USB memory device may
cause irregularities such as continuous appearance of “READING
FILES”. Should this happen, turn off the unit and then turn it on again.
To cancel repeat play:
Press the PLAY MODE button again until “ ” will disappear.
2 Disconnect USB memory device from the USB terminal.
„ Random play
The tracks can be played in random order automatically.
To random play all tracks:
Press and hold down PLAY MODE button on the remote control.
Press the
/
button.
Notes:
z
SHARP will not be held liable for the loss of data whilst the USB memory device is con-
nected to the audio system.
PLAYMODE
z
Files compressed in MP3 and / or WMA format can be played back when connected to
the USB terminal.
z
z
z
This USB memory’s format supports FAT 16 or FAT 32.
SHARP cannot guarantee that all USB memory devices will work on this audio system.
USB cable is not recommended for use in this audio system to connect to USB memory
device. Use of the USB cable will affect the performance of this audio system.
This USB memory cannot be operated via USB hub.
To cancel random play:
Press the PLAY MODE button.
“R” will disappear.
z
z
The USB terminal in this unit is not intended for a PC connection but is used for music
streaming with a USB memory device.
External HDD-storage cannot be played back via USB terminal.
If the data inside the USB memory is large, it may take longer time for the data to be
read.
This product can play WMA and MP3 files. It will automatically detect the file type being
played. If unplayable file is played on this product, “NO SUPPORT” is indicated and the
file will be automatically skipped. This will take a few seconds. If abnormal indications
appear on the display due to the unspecified file, turn off the unit and then turn it on
again.
Notes:
z
z
z If you press the
button during random play, you can move to
the track selected next by the random operation. On the other
hand, the
button does not allow you to move to the previous
z
track. The beginning of the track being played will be located.
z In random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)
z
z
This product relates to USB mass storage devices and MP3 players.It may however face
some irregularities due to various unforeseen reasons from some devices. Should this
happen, turn off the unit and then turn it on again.
The USB port is intended for direct connection to a USB memory device without any
cable.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to radio
XL-UH2080H
Note:
) When folder mode is on, the selected play mode can be used for
the files in the selected folder only.
(
Notes:
z This unit only supports “MPEG-1 Audio Layer-3” format.
(Sampling Frequency is 32, 44.1, 48kHz)
“MPEG-2 Audio Layer-3” , “MPEG-2.5 Audio Layer-3” and MP1,
MP2 format are not supported.
z Programme playback for USB memory is not available.
z Playback order for MP3 files may differ sometimes depending on
the writing software used during file download.
z Bitrate which is supported by MP3 is 32~320 kbps, WMA is
64~160 kbps.
z For MP3/WMA files, please put “.MP3” “.WMA” extension. Files
cannot be played back if there is no MP3/WMA extension.
z Playlists are not supported on this unit.
z
This unit can display Folder Name or File Name up to 32 characters.
z Maximum total number of MP3/WMA files is 65280. Maximum
total number of folders is 255 inclusive of root directory. Folders
which have non playable files also counted.
z The display playback time may not be displayed correctly when
playing back a variable bitrate file.
z Time display cannot be changed by the DISPLAY button.
z The ID3TAG information supported are TITLE, ARTIST and
Auto power on function:
ALBUM only.
When you press any of the following buttons, the unit turns on.
z TUNER (BAND) button (main unit and remote control): The unit
turns on and the “TUNER” function is activated.
z Title name, artist name and album name can be displayed by
pressing the DISPLAY button during file playback or pause mode.
z WMA meta tag also supports title, artist and album name which
are recorded in WMA files.
z
/
button on the main unit: The unit turns on and playback of
the last function starts (CD, TUNER, AUDIO IN, USB).
z Copyright protected WMA files cannot be played back.
Note:
This product can receive FM stereo/FM monaural and AM monaural
broadcasts. Am stereo broadcasts will not be played in stereo.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to radio (continued)
XL-UH2080H
„ Tuning
„ Memorising a station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
1 Press the ON/STAND-BY button to turn the power on.
2 Press the TUNER (BAND) button repeatedly to select the
1 Perform steps 1 - 3 in “Tuning” on page 24.
desired frequency band (FM or AM).
2 Press the MEMORY button to enter the preset tuning
saving mode.
3 Press the TUNING ( or ) button on the remote control
to tune in to the desired station.
Manual tuning:
Press the TUNING ( or ) button as many times as required
to tune in to the desired station.
Auto tuning:
3 Within 30 seconds, press the PRESET ( or ) button to
select the preset channel number.
When the TUNING ( or ) button is pressed for more than
0.5 seconds, scanning will start automatically and the tuner
will stop at the first receivable broadcast station.
Store the stations in memory, in order, starting with preset
channel 1.
Notes:
z When radio interference occurs, auto scan tuning may stop
automatically at that point.
4 Within 30 seconds, press the MEMORY button to store that
station in memory.
z Auto scan tuning will skip weak signal stations.
z
To stop the auto tuning, press the TUNING ( or ) button again.
z When an RDS (Radio Data System) station is tuned in, the
frequency will be displayed first, and then the RDS indicator will
light up. Finally, the station name will appear.
z Full auto tuning can be achieved for RDS stations “ASPM”, see
page 26.
If the “MEMORY” and preset number indicators disappear
before the station is memorised, repeat the operation from step
2.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to select stereo mode and “ST”
indicator will be displayed.
z “ ” will appear when an FM broadcast is in stereo.
z If the FM reception is weak, press the TUNER (BAND) button to
extinguish the “ST” indicator. The reception changes to
monaural, and the sound becomes clearer.
5 Repeat steps 1 - 4 to set other stations, or to change a
preset station.
When a new station is stored in memory, the station previously
memorised for that preset channel number will be erased.
FM stereo mode indicator
Note:
The backup function protects the memorised stations for a few
hours should there be a power failure or the AC power lead become
disconnected.
FM stereo receiving indicator
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Radio Data System (RDS)
XL-UH2080H
RDS is a broadcasting service which a growing number of FM
stations provide. These FM stations send additional signals
along with their regular programme signals. They send their sta-
tion names, and information about the type of programme such
as sport, music, etc.
When tuned to an RDS station, “RDS” and the station name will be
displayed.
“TP” (Traffic Programme) will appear on the display when the
received broadcast carries traffic information, and “TA” (Traffic
Announcement) will appear whilst a traffic information is on air.
“PTYI” (Dynamic PTY Indicator) will appear whilst the Dynamic PTY
station is received.
„ To recall a memorised station
Press the PRESET ( or ) button for less than 0.5 seconds to
select the desired station.
„ To scan the preset stations
The stations saved in memory can be scanned automatically.
(Preset memory scan)
1
Press the PRESET
(
or
)
button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
2
Press the PRESET (
station is located.
or ) button again when the desired
You can control the RDS by using the buttons on the remote
control only.
„ To erase entire preset memory
1
Press the ON/STAND-BY button to enter the stand-by mode.
Whilst pressing down the button, press the TUNER (BAND)
button until “TUNER CLEAR” appears.
2
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Radio Data System (RDS) (continued)
XL-UH2080H
„ Information provided by RDS
Each time the RDS DISPLAY button is pressed, the display will
switch as follows:
„ Using the Auto Station Programme Memory
(ASPM)
Whilst in the ASPM operation mode, the tuner will automatically
search for new RDS stations. Up to 40 stations can be stored.
If you have already stored some stations in memory, the number of
new stations you can store will be less.
1 Press the TUNER (BAND) button to select the FM band.
2 Press and hold down the RDS ASPM button on the remote
control for at least 3 seconds.
1
After “ASPM” has flashed for about 4 seconds, scanning will
start (87.50 - 108.00 MHz).
2
When an RDS station is found, “RDS” will appear for a short
time and the station will be stored in memory.
Station name (PS)
Frequency
Programme type (PTY)
Radio text (RT)
3
After scanning, the number of stations stored in memory will
be displayed for 4 seconds, and then “END” will appear for
4 seconds.
When you are tuning in to a station other than an RDS station or to
an RDS station which sends weak signal, the display will change in
the following order:
NO PS
NO PTY
NO RT
FM 98.80 MHz
26
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-UH2080H
To stop the ASPM operation before it is complete:
Press the RDS ASPM button whilst it is scanning for stations.
The stations which are already stored in memory will be kept there.
Notes:
z The same station name can be stored in different channels.
z In a certain area or during certain time periods, the station names
may temporarily be different.
Notes:
z If the same station is broadcasting on different frequencies, the
strongest frequency will be stored in memory.
z Any station which has the same frequency as the one stored in
memory will not be stored.
z If 40 stations have already been stored in memory, the scan will
be aborted. If you want to redo the ASPM operation, erase the
preset memory.
z If no station have been stored in memory, “END” will appear for
about 4 seconds.
z If the RDS signals are very weak, station names may not be
stored in memory.
„ Notes for RDS operation
If any of the following events occur, it does not mean that the
unit is faulty:
z “PS”, “NO PS” and a station name appear alternately, and the unit
does not operate properly.
z If a particular station is not broadcasting properly or a station is
conducting tests, the RDS reception function may not work
properly.
z When you receive an RDS station whose signal is too weak,
information like the station name may not be displayed.
z “NO PS”, “NO PTY” or “NO RT” will flash for about 5 seconds, and
then the frequency will be displayed.
To erase all of the contents of preset memory:
1 Press the ON/STAND-BY button to enter the power stand-by
mode.
Notes for radio text:
2 Whilst pressing down the button, press the TUNER (BAND)
button until “TUNER CLEAR” appears.
z The first 10 characters of the radio text will appear for 4 seconds
and then they will scroll across the display.
z If you tune in to an RDS station which is not broadcasting any
radio text, “NO RT” will be displayed when you switch to the radio
text position.
z After performing this operation, all of the preset memory
information will be erased.
To store a station name again if the wrong name was stored in
memory:
It may be impossible to store station names in memory using the
ASPM function if there is lots of noise or if the signal is too weak. In
this case, perform as follows.
z Whilst radio text data is received or when the text contents
change, “RT” will be displayed.
1 Press the PRESET ( or ) button to check whether the names
are correct.
2 If you find a wrong name during receiving the station, wait until the
correct name is displayed and then press the MEMORY
button.
3 Within 30 seconds, press the MEMORY button whilst the preset
channel number is flashing.
z The new station name has been stored in memory correctly.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Radio Data System (RDS) (continued)
XL-UH2080H
Notes:
„ To recall stations in memory
z If the display has stopped flashing, start again from step 2. If the
To specify programmed types and select stations (PTY search):
You can search a station by specifying the programme type (news,
sports, traffic programme, etc. ... see pages 29 - 30) from the stations
in memory.
unit finds a desired programme type, the corresponding channel
number will flash for about 4 seconds, and then the station name
will flash for 7 seconds, which will remain lit.
z If you want to listen to the same programme type of another
station, press the RDS PTY button whilst the channel number or
station name is flashing. The unit will look for the next station.
z If no station can be found, “NOT FOUND” will appear for 4
seconds.
1 Press the TUNER (BAND) button to select the FM band.
2 Press the RDS PTY button on the remote control.
If you select the traffic programme:
If you select the traffic programme (TP) in step 3, “TP” will appear.
(This does not mean that you can listen to the traffic information at
that time.)
“SELECT” and “PTY TI” will appear alternately for about 6
seconds.
When the traffic information is broadcast, “TA” will appear.
3 Within 6 seconds, press the PRESET ( or ) button to
select the programme type.
To specify station names and select stations manually:
You can select a station by specifying the name (BBC R1, BBC R2,
etc.) from the stations stored in memory.
Before starting this operation, you must store one or more station
names in memory.
Each time the button is pressed, the programme type will
appear. If the button is held down for more than 0.5 seconds,
the programme type will appear continuously.
1
2
Press the TUNER (BAND) button to select the FM band.
Press the PRESET ( or ) button on the remote control to
select a desired station.
3
The station name will be displayed for 6 seconds. Then the
display will change.
4 Whilst the selected programme type is flashing (within 6
seconds), press the RDS PTY button again.
After the selected programme type has been lit for 2 seconds,
“SEARCH” will appear, and the search operation will start.
Advanced Features
28
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-UH2080H
Descriptions of the PTY (Programme Type) codes, TP (Traffic
Programme)TA (Traffic Announcement).
You can search for and receive the following PTY, TP and TA
signals.
LIGHT M
Classical music for general, rather than specialist
appreciation. Examples of music in this category
are instrumental music, and vocal or choral works.
CLASSICS
OTHER M
WEATHER
Performances of major orchestral works,
symphonies, chamber music, etc., and including
Grand Opera.
NEWS
Short accounts of facts, events and publicly
expressed views, reportage and actuality.
AFFAIRS
Topical programme expanding or enlarging upon
the news, generally in different presentation style or
concept, including debate, or analysis.
Musical styles not fitting into any of the other
categories. Particularly used for specialist music of
which Rhythm & Blues and Reggae are examples.
INFO
Programmes whose purpose is to impart advice in
the widest sense.
Weather reports and forecasts and meteorological
information.
SPORT
Programme concerned with any aspect of sport.
FINANCE
Stock Market reports, commerce, trading, etc.
EDUCATE
Programme intended primarily to educate, of which
the formal element is fundamental.
CHILDREN
For programmes targeted at a young audience,
primarily for entertainment and interest, rather than
where the objective is to educate.
DRAMA
All radio plays and serials.
CULTURE
Programmes concerned with any aspect of national
or regional culture, including language, theatre, etc.
SOCIAL
Programmes about people and things that influence
them individually or in groups. Includes: sociology,
history, geography, psychology and society.
SCIENCE
VARIED
Programmes about the natural sciences and
technology.
RELIGION
PHONE IN
TRAVEL
Any aspect of beliefs and faiths, involving a God or
Gods, the nature of existence and ethics.
Used for mainly speech-based programmes usually
of light-entertainment nature, not covered by other
categories. Examples include: quizzes, panel
games, personality interviews.
Involving members of the public expressing their
views either by phone or at a public forum.
Features and programmes concerned with travel to
near and far destinations, package tours and travel
ideas and opportunities. Not for use for
announcements about problems, delays, or
roadworks affecting immediate travel where TP/TA
should be used.
POP M
Commercial music, which would generally be
considered to be of current popular appeal, often
featuring in current or recent record sales charts.
ROCK M
EASY M
Contemporary modern music, usually written and
performed by young musicians.
LEISURE
JAZZ
Programmes concerned with recreational activities
in which the listener might participate. Examples
include, Gardening, Fishing, Antique collecting,
Cooking, Food & Wine, etc.
Current contemporary music considered to be
“easy-listening”, as opposed to Pop, Rock or
Classical, or one of the specialised music styles,
Jazz, Folk or Country. Music in this category is often
but not always, vocal, and usually of short duration.
Polyphonic, syncopated music characterised by
improvisation.
Advanced Features
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Radio Data System (RDS) Timer and sleep operation
XL-UH2080H
(continued)
(Remote Control only)
Timer playback:
The unit turns on and plays the desired source (CD, TUNER, USB,
AUDIO IN) at a preset time.
COUNTRY
Songs which originate from, or continue the musical
tradition of the American Southern States.
Characterised by a straightforward melody and
narrative story line.
This unit has 2 types of timer: ONCE TIMER and DAILY TIMER.
NATION M
Current Popular Music of the Nation or Region in
that country's language, as opposed to International
“Pop” which is usually US or UK inspired and in
English.
Once timer: Once timer play works for one time only at a preset
time.
OLDIES
FOLK M
Music from the so-called “golden age” of popular
music.
Daily timer: Daily timer play works at the same preset time
Music which has its roots in the musical culture of a
particular nation, usually played on acoustic
instruments. The narrative or story may be based
on historical events or people.
every day.
For example, set the timer as a wake-up call every morning.
DOCUMENT Programme concerned with factual matters,
Using the once timer and daily timer in combination:
For example, use the once timer to listen to a radio programme, and
use the daily timer to wake up.
presented in an investigative style.
TEST
Broadcast when testing emergency broadcast
equipment or receivers.
1
2
Set the daily timer (pages 30 - 33).
Set the once timer (pages 30 - 33).
ALARM !
Emergency
announcement
made
under
exceptional circumstances to give warning of
events causing danger of a general nature.
1 minute or more
Daily timer
NONE
TP
No programme type (receive only).
Broadcasts which carry traffic announcements.
Traffic announcements are being broadcast.
Once timer
TA
Start
Note:
Stop
Start
Stop
When the setting times for daily timer and once timer overlap, the
once timer takes priority. Allow an interval of at least 1 minute
between operations.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-UH2080H
4 Within 10 seconds, press the
or
button to
select “ONCE SET” or “DAILY SET”, and press the
MEMORY button.
5 Press the
or
button to adjust the hour and
then press the MEMORY button.
The illustrations show the timer playback setting in the daily
timer mode.
„ Timer playback
Before setting timer:
6 Press the
or
button to adjust the minutes and
1 Check that the clock is set to the correct time (refer to page 13).
If it is not set, you cannot use the timer function.
then press the MEMORY button.
2 For timer playback: Load disc to be played.
7 Set the time to finish as in steps 5 and 6 above.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CLOCK/TIMER button.
8 Switch input with the
press the MEMORY button.
or
button, and then
3 Within 10 seconds, press the
or
button to
To select the timer playback source: CD, TUNER, USB or
AUDIO IN.
select “ONCE” or “DAILY”, and press the MEMORY button.
z When you select the tuner, select a station by pressing the
or
button, and then press the MEMORY
button.
Set the clock to the correct time if “ONCE” or “DAILY” does not
appear.
z If a station has not been programmed, “NO PRESET” will be
displayed and timer setting will be cancelled.
Advanced Features
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer and sleep operation (Remote Control only) (continued)
XL-UH2080H
Notes:
9
Adjust the volume using the VOLUME control, and then
press the MEMORY button.
●
When performing timer playback using another unit connected to the
USB or AUDIO IN socket, select “USB” or “AUDIO IN” in step 8.
This unit will turn on or enter the power stand-by mode
automatically. However, the connected unit to AUDIO IN socket
will not turn on or off.
Do not turn the volume up too high.
10 Press the ON/STAND-BY button to enter the power stand-
by mode.
● To stop the timer playback, follow step “Cancelling the timer
The “TIMER” indicator lights up and the unit is ready for timer
playback.
setting in the timer stand-by mode”.
Checking the timer setting in the timer stand-by mode:
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
“ONCE” or “DAILY”, and press the MEMORY button.
3 Within 10 seconds, press the or button to select
“ONCE CALL” or “DAILY CALL”, and press the MEMORY button.
The unit returns to the timer stand-by mode after displaying the
settings in order.
Cancelling the timer setting in the timer stand-by mode:
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
“ONCE” or “DAILY”, and press the MEMORY button.
3 Within 10 seconds, press the
or
button to select
11 When the preset time is reached, playback will start.
“ONCE OFF” or “DAILY OFF”, and press the MEMORY button.
Timer will be cancelled (the setting will not be cancelled).
The volume will increase gradually until it reaches the preset
volume.
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To reuse the
same setting, perform the following operations.
12 When the timer end time is reached, the system will enter
the power stand-by mode automatically.
1 Turn the power on and press the CLOCK/TIMER button.
2 Within 10 seconds, press the
Once timer:
or
button to select
“ONCE” or “DAILY”, and press the MEMORY button.
The timer will be cancelled.
The “r” indicator will blink during timer playback.
3 Within 10 seconds, press the or button to select
“ONCE ON” or “DAILY ON”, and press the MEMORY button.
4 Press the ON/STAND-BY button to enter the power stand-by
mode.
Daily timer:
The timer will operate at the same time every day. It will
continue until the daily timer setting is cancelled. Cancel the
daily timer when it is not in use.
The “DAILY r” indicator will blink during timer playback.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-UH2080H
To cancel the sleep operation:
„ Sleep operation
Press the ON/STAND-BY button whilst “SLEEP” is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
The radio, compact disc and USB can be turned off automatically.
1 Play back the desired sound source.
2 Press the CLOCK/TIMER button.
3 Within 10 seconds, press
1
2
Whilst “SLEEP” is indicated, press the CLOCK/TIMER button.
Within 10 seconds, press the or button to select
“SLEEP OFF”, and press the MEMORY button.
the
or
button
to select “SLEEP”, and
press the MEMORY button.
„ To use timer and sleep operation together
4 Press the
or
button to select the time.
Sleep and timer playback:
(Maximum: 3 hours - Minimum: 1 minute)
z 3 hours - 5 minutes 5-minute intervals
z 5 minutes - 1 minute 1-minute intervals
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
1
2
Set the sleep time (see left, steps 1 - 5).
Whilst the sleep timer is set, set the timer playback
(steps 2 - 10, pages 30 - 32).
5 Press the MEMORY button.
“SLEEP” will appear.
Sleep timer setting
Timer playback setting
End time
Desired time
Timer playback start time
6 The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
1 minute - 3 hours
Sleep operation will
The volume will be turned down 1 minute before the sleep
operation finishes.
autimatically stop
To confirm the remaining sleep time:
1
2
Whilst “SLEEP” is indicated, press the CLOCK/TIMER button.
Within 10 seconds, press the
“SLEEP X : XX”.
or
button to select
“X : XX” is sleep remaining time.
z The remaining sleep time is displayed for about 10 seconds.
z You can change the remaining sleep time whilst it is displayed by
pressing the MEMORY button (steps 4 - 5).
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Enhancing your system
XL-UH2080H
The connection lead is not included. Purchase a commercially avail-
able lead as shown below.
Auto power on function (AUDIO IN):
When you press any of the following buttons, the unit turns on.
z AUDIO IN button (main unit and remote control): The unit turns on
and the “AUDIO IN” function is activated.
Portable audio player, etc.
z
/
button on the main unit: The unit turns on and playback of
the last function starts (CD,TUNER, AUDIO IN, USB).
„ Listening to the playback sounds of Portable
AUDIO CABLE
(NOT SUPPLIED)
Audio Player, etc.
1 Use a connection lead to connect the Portable Audio
Player etc. to the AUDIO IN socket.
When using video equipment, connect the audio output to this
unit and the video output to a television.
2 Press the ON/STAND-BY button to turn the power on.
3 Press the AUDIO IN button.
4 Play the connected equipment.
If volume level of the connected device is too high, sound
distortion may occur. Should this happen, lower the volume of
the connected device.
If volume level is too low, increase the volume of the connected
device.
Note:
To prevent noise interference, place the unit away from the
television.
„ Headphones
z Do not turn the volume on to full at switch on. Listen to music at
moderate levels. Excessive sound pressure from earphones and
headphones can cause hearing loss.
z Before plugging in or unplugging the headphones, reduce the
volume.
z Be sure your headphones have a 3.5 mm (1/8") diameter plug and
impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.
z Plugging in the headphones disconnects the speakers
automatically. Adjust the volume using the VOLUME control.
Download from Www.Somanuals.com. All Manuals Search And Download.
34
Troubleshooting chart
XL-UH2080H
Many potential problems can be resolved by the owner without
calling a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
„ Subwoofer connection
When a commercially available subwoofer with a built-in amplifier is
connected to this unit, you can enjoy sound with emphasised bass.
Connect an RCA lead from a commercially available speaker with a
built-in amplifier to the SUBWOOFER PRE-OUT socket.
„ General
Symptom
z The clock is not set to the z Did a power failure occur? Reset
correct time. the clock. (Refer page 13)
z When a button is pressed, z Set the unit to the power stand-
Possible cause
the unit does not respond.
by mode and then turn it back on.
z If the unit still malfunctions, reset
it. (Refer page 36)
z No sound is heard.
z Is the volume level set to “0”?
z Are the headphones connected?
z Are the speaker wires
disconnected?
„ CD player
Symptom
Possible cause
Subwoofer with a
built-in amplifier
z Playback does not start.
z Is the disc loaded upside down?
z Playback stops in the
middle or is not performed
properly.
z Does the disc satisfy the
standards?
z Is the disc distorted or
scratched?
z Playback sounds are
skipped, or stopped in the
middle of a track.
z Is the unit located near excessive
vibrations?
z Is the disc very dirty?
z Has condensation formed inside
the unit?
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting chart (continued)
XL-UH2080H
„ Remote Control
„ Condensation
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet (CD
pickup, etc.) or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on with no disc in the unit until normal playback is
possible (about 1 hour). Wipe off any condensation on the transmitter
with a soft cloth before operating the unit.
Symptom
Possible cause
z The remote control does z Is the AC power lead of the unit
not operate.
plugged in?
z Is the battery polarity correct?
z Are the batteries dead?
z Is the distance or angle
incorrect?
z Does the remote control sensor
receive strong light?
„ If problem occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
„ Tuner
Symptom
Possible cause
If such a problem occurs, do the following:
z The radio makes unusual z Is the unit placed near the TV or
1
2
Set the unit to the stand-by mode and turn the power on again.
If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
noises continuously.
computer?
z Is the FM aerial or AM loop aerial
placed properly? Move the aerial
away from the AC power lead if
it's located nearby.
Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
„ USB
„ Factory reset, clearing all memory
Symptom
Possible cause
1
Press the ON/STAND-BY button to enter the power stand-by
mode.
z Device cannot
detect.
z Is there any MP3/WMA file available?
z Does the device properly connected?
z Does it MTP device?
2
Whilst pressing down the
“CLEAR ALL” appears.
button, press the CD button until
z Does the device contain AAC file only?
z Playback does z Is it the copyright protected WMA file?
not start.
z Is it the false MP3 file?
z Timedisplaynot z Does Variable Bitrate file being playback?
correct.
z The File Name had written in Chinese or
Japanese character?
Caution:
z File Name dis-
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD programme.
play not correct.
„ Before transporting the unit
Remove CD from the unit. Make sure there is no CD in the disc tray.
Then, set the unit to the power stand-by mode. Carrying the unit
with disc left inside can damage the unit.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
XL-UH2080H
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product im-
provement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
„ Care of compact discs
Compact discs are fairly resistant to damage, however mistracking
can occur due to an accumulation of dirt on the disc surface. Follow
the guidelines below for maximum enjoyment from your CD collec-
tion and player.
z Do not write on either side of the disc, particularly the non-label
side from which signals are read. Do not mark this surface.
z Keep your discs away from direct sunlight, heat, and excessive
moisture.
z Always hold the CDs by the edges. Fingerprints, dirt, or water on
the CDs can cause noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight out
from the centre, along the radius.
„ General
Power source
Power consumption Power on: 40 W
Power stand-by: 0.6 W (*)
AC 220 - 240V ~ 50Hz
Dimensions
Width: 180 mm (7 - 1/16")
Height: 260 mm (10 - 2/8")
Depth: 273 mm (10 - 6/8")
YES
NO
Weight
4.0 kg (8.8 lbs.)
Correct
( * )This power consumption value is obtained when the
demonstration mode is cancelled in the power stand-by mode.
Refer to page 10 to cancel the demonstration mode.
„ Amplifier
Output power
PMPO : 128 W
Maintenance
MPO : 64 W (32 W + 32 W) (10% T.H.D.)
RMS: 64 W (32 W + 32 W) (10% T.H.D.)
RMS: 40 W (20 W + 20 W) (1% T.H.D.)
„ Cleaning the CD pickup lens
In order to ensure proper operation of the CD player, preventative
maintenance (cleaning of the laser pickup lens) should be
performed periodically. Lens cleaners are commercially available.
Contact your local CD software dealer for options.
Output terminals
Speakers: 4 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Subwoofer pre-out (audio signal):
150 mV/10 k ohms at 70 Hz
„ Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.
Input terminals
Audio In (Audio signal):
250 mV/47 k ohms
Caution:
z Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.
z Do not apply oil to the inside of the unit. It may cause
malfunctions.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications (continued)
XL-UH2080H
„ CD player
„ USB
Type
Single disc multi-play compact disc player
USB host interface zComplies with USB 1.1 (Full Speed)/ 2.0
Mass-Storage-Class.
Signal readout
Non-contact, 3-beam semiconductor laser
pickup
zSupport Bulk only and CBI protocol.
Support file
Bitrate support
Other
zMPEG 1 Layer 3
D/A converter
Multi bit D/A converter
zWMA (Non DRM)
Frequency response 20 - 20,000 Hz
zMP3 (32 ~ 320 kbps)
z WMA (64 ~ 160 kbps)
Dynamic range
90 dB (1 kHz)
zMaximum total number of MP3/WMA files
is 65280.
zMaximum total number of folders is 255
INCLUSIVE of root directory. (Folders
which have non playable files also
counted.)
zThe ID3TAG information supported are
TITLE, ARTIST and ALBUM only.
zSupport ID3TAG version 1 and version 2.
„ Tuner
Frequency range
FM: 87.5 - 108 MHz
AM: 522 - 1,620 kHz
File system
support
zSupport USB devices with Microsoft
Windows/DOS/FAT 12/ FAT16/ FAT 32.
z2 kbyte block length for sector.
„ Speaker
Type
2-way type speaker system
5 cm (2") tweeter
10 cm (4") woofer
Maximum input
power
64 W
Rated input power 32 W
Impedance
Dimensions
4 ohms
Width: 130 mm (5 - 1/2")
Height: 260 mm (10 - 1/4")
Depth: 164.5 mm (6 - 1/2")
Weight
1.75 kg (3.90 lbs.) / each
38
Download from Www.Somanuals.com. All Manuals Search And Download.
FOR LOCATION ENQUIRIES WITHIN
FOR LOCATION ENQUIRIES WITHIN
AUSTRALIA
REGARDING YOUR LOCAL
NEW ZEALAND
REGARDING YOUR LOCAL
SHARP APPROVED SERVICE CENTRE
VISIT OUR WEBSITE AT
SHARP APPROVED SERVICE CENTRE
VISIT OUR WEBSITE AT
CONTACT YOUR SELLING DEALER/RETAILER
OR CALL
OR CALL SHARP CUSTOMER CARE
1300 135 022
SHARP CUSTOMER SERVICES
TELEPHONE: 09 573 0111
FACSIMILE: 09 573 0113
(LOCAL CALL COST APPLY WITHIN AUSTRALIA)
SHARP CORPORATION OF AUSTRALIA PTY LTD
SHARP CORPORATION OF NEW ZEALAND LIMITED
SPform019(JUNE 2004)
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
Consumer Electronic Products
Congratulations on Your Purchase!
This Sharp product is warranted against faults in materials and manufacture for a period of twelve(12) months from the
date of original purchase.
If service is required during the warranty period, please contact your nearest Sharp Approved Service Centre.
These repairs would be carried out at no charge to the owner, subject to the conditions specified herein.
The owner is responsible for any transportation and insurance costs if the product has to be returned for repair.
This warranty does not extend to accessories or defects or injuries caused by or resulting from causes not
attributable to faulty parts or the manufacture of the product, including but not limited to, defect or injury caused
by or resulting from misuse, abuse, neglect, accidental damage, improper voltage, liquid spillage, vermin
infestation, software, or any alterations made to the product which are not authorised by Sharp.
Please retain your sales documentation, as this should be produced to validate a warranty claim.
F
O
This warranty is in addition to and in no way limits, varies or excludes any express and implied rights and
remedies under any relevant legislation in the country of sale.
ATION
TED
MI
LI
Drive
CORPOR
ZEALAND
IMPORTANT
SHARP
NEW
DO NOT RETURN THIS DOCUMENT TO SHARP
59 Hugo Johnston
Penrose, Auckland
ON OF
For your reference, please enter the particulars of your purchase below and retain,
with your purchase documentation.
)
04
0
2
E
2148
UN
(J
14
0
Model No.
Serial No.
Date of Purchase
Retailer
SHARP CORPORATI
AUSTRALIA PTY. LIMITED
rm
fo
P
S
ABN 40 003 039 405
ngwood NSW
1 Huntingwood Drive
Hunti
IMPORTANT NOTICE: This warranty applies only to products sold in Australia & New Zealand
SHARP CORPORATION
TINSEA252AWZZ
08E R MW1
Download from Www.Somanuals.com. All Manuals Search And Download.
|