Sharp Tablet MX 2310U User Manual

Sharpdesk Mobile Operation Manual  
Sharpdesk Mobile Operation Manual  
for iPad  
SHARP CORPORATION  
March 2, 2012  
1
Copyright © 2012 SHARP CORPORATION All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sharpdesk Mobile Operation Manual  
1 Overview  
This product is an application that  
Receives, previews and stores scanned documents from your scanner to your mobile device  
(hereafter it is called device)  
Prints the documents and photos stored in the device to your printer  
Attaches the scanned documents stored in this application to e-mail, and sends and utilizes the  
documents to other application in the device  
3
Copyright © 2012 SHARP CORPORATION All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Sharpdesk Mobile Operation Manual  
2 Operational Environment  
This application can be installed and used on the following environments (note 1).  
iPhone 4, iPhone 4S, iPad, iPad 2 (for the operation on iPhone 4 and iPhone 4S, see Operation Manual  
for iPhone)  
iOS version: 4.3 or 5.0  
(note 1) Your device is necessary to be connected to Wi-Fi network.  
The following Sharp MFPs can be used to scan documents to / print documents from your mobile device  
(note 2)(note 3):  
MX-2310U (note 4), MX-3111U (note 4)  
MX-2610N, MX-3110N, MX-3610N,  
MX-4110N, MX-4111N, MX-5110N, MX-5111N  
(note 2) Your MFPs are necessary to be connected to your network. PS3 Expansion Kit is also  
necessary to be installed to print PDF files from this application.  
(note 3) This application is not able to print if user authentication is enabled on your MFP.  
(note 4) As for MX-2310U and MX-3111U, Printer Expansion Kit is necessary to be installed to print from  
this application. PS3 Expansion Kit is also necessary to be installed to print PDF files from this  
application.  
This application can handle the following file formats (note 5):  
JPEG, TIFF, PDF  
(note 5) Maximum length of file names of these file formats that this application can handle depends on  
the specification of iOS.  
This application uses Bonjour, FTP and HTTP for searching MFPs on the network, receiving scanned  
data from MFPs and printing to MFPs.  
4
Copyright © 2012 SHARP CORPORATION All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Sharpdesk Mobile Operation Manual  
3 Install and Start  
This application is categorized as “Utility.” User  
can search this application in App Store by  
entering “Sharpdesk Mobile.”  
II. Tap the “Sharpdesk M” icon to start this  
application.  
III. The splash screen is displayed.  
IV. After the splash screen disappears, Top Menu  
screen is displayed.  
(note) If no scanners are registered when staring the  
application, popup message saying “There is no  
available scanner” appears.  
I. Download this application from App Store  
and install.  
5
Copyright © 2012 SHARP CORPORATION All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Sharpdesk Mobile Operation Manual  
4 Set Up Printer/Scanner  
After starting this application, set up the printers to print from the device and the scanners from which the  
device receives scanned data  
I. Tap “Setting” on Top Menu screen.  
II. Tap “Set up Printer/Scanner.”  
III. Tap “Find Printers/Scanners.”  
Printers and scanners on the network are  
searched and listed automatically.  
(note) For “Find Printers/Scanners,” the MFPs  
must be on the same segment of the network  
where the device is connected. If you use  
scanners/printers on the different segments of  
the network, see Step IX of this chapter (page  
8) to add manually.  
6
Copyright © 2012 SHARP CORPORATION All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Sharpdesk Mobile Operation Manual  
IV. Printers and Scanners searched from the  
network are displayed as list.  
V. Tap the specific scanner/printer if you wish to  
check its information.  
VI. The information of selected printer/scanner is  
displayed.  
Tap “Port Number” to change port number.  
7
Copyright © 2012 SHARP CORPORATION All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sharpdesk Mobile Operation Manual  
VII. Tapping “Edit” button enables user to delete and  
arrange order of the printer/scanner.  
VIII.  
Tapping  
enables user to delete a  
printer/scanner from the list.  
Also, tapping  
and moving the finger up and  
down enables user to arrange order of the  
printers/scanners.  
IX. Tap “Add Manually” if you wish to add any  
printers/scanners that cannot be added on “Find  
Printers/Scanners.”  
8
Copyright © 2012 SHARP CORPORATION All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Sharpdesk Mobile Operation Manual  
X. Enter IP address and port number to add a  
printer/scanner.  
(note) Port number is necessary for print from  
the device. Enter the same port number as  
configured on the printer. If different port  
number is entered, this application cannot print  
to the printer.  
To check the port number in the printer, see  
[Application Settings]-[Setting for Print from the  
PC]. The default port number for both printer  
and device is 21.  
Also, FTP print has to be enabled on the printer.  
9
Copyright © 2012 SHARP CORPORATION All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sharpdesk Mobile Operation Manual  
5 Set Up User Information  
Set up the user information for letting the scanner display the scan destination when the device receives  
scanned data from the scanner.  
I. Tap “Setting” on Top Menu screen.  
II. Tap “Set up User Information”.  
III. Set up “Display Name” for letting scanner  
display it as scan destination when the device  
receives scanned data from the scanner. The  
default value is same as the value of “Name”  
in the device’s user information.  
“Character Search” is used for the sort key on  
displaying “Display Name” in the address book  
screen of the scanner.  
Set to “I(ON)” in “Profile Automatic Delete” if  
deleting the destination on the scanner after  
scan is completed.  
10  
Copyright © 2012 SHARP CORPORATION All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Sharpdesk Mobile Operation Manual  
6 Scan  
This function receives the documents scanned by selected scanner and stores them in the device.  
(note) Resolution, file format and other scan settings must be done in the MFP operation panel when  
scanning. (see step V of page 12)  
I. Tap “Scan” on Top Menu screen.  
II. Tap the button next to “Scanner” to select a  
scanner to scan the document.  
III. Tap “Scan.”  
(note) Please be sure address book is not  
displayed in the operation panel of the scanner.  
If address book is displayed in the operation  
panel, device may not be in the waiting state.  
(See next step)  
11  
Copyright © 2012 SHARP CORPORATION All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Sharpdesk Mobile Operation Manual  
IV. The popup is displayed and the device is in the  
waiting state.  
V. Set the document on the scanner and  
configure resolution, file format, color mode or  
other settings.  
Select the destination on “Address Book” in  
“Fax/Image Send” so that the destination is the  
same as “Display Name” configured in Chapter  
5 of page 10, “Set up User Information.”  
Push Start button on the scanner to execute  
scanning.  
VI. Scanned data is sent to the device and the  
device stores the data into the memory.  
If multiple scanned data is received, the list of  
scanned data is listed. Tap “Save” in the right  
side of “Scan” title bar to store these data.  
(note) Tap any data to preview received data from  
the list. However, this data can only be stored  
together with the rest of the received data.  
12  
Copyright © 2012 SHARP CORPORATION All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Sharpdesk Mobile Operation Manual  
VII. If a single data is received, the content of the  
data is displayed.  
Tap “Save this Image” button at the  
bottom-right of the screen to store this data in  
the application.  
13  
Copyright © 2012 SHARP CORPORATION All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sharpdesk Mobile Operation Manual  
7 Print  
Scanned documents and photo images stored in this application can be printed.  
Supported file formats are JPEG, PDF and TIFF.  
(note) No documents or images can be printed if user authentication is enabled on MFP.  
7.1 Print a Scanned Document  
I. Tap “Print” on Top Menu screen.  
II. Scanned documents stored by “Scan” function  
(See Chapter 6 of page 11) and documents  
sent from another application (See Chapter 11  
of page 20) are listed by year/month at the  
time of the scanning.  
Tap the data to preview contents of the data.  
III. Tap “Printer” to select the printer to print.  
Tap “Quantity” to configure print quantity.  
Quantity can be configured from 1 set to 99  
sets.  
Tap “Duplex Setting” to configure 1-side print  
or 2-sided print. Regarding 2-sided print, it can  
be configured along with binding direction of  
Tablet or Book.  
(note) other settings than quantity and duplex  
setting cannot be configured.  
14  
Copyright © 2012 SHARP CORPORATION All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Sharpdesk Mobile Operation Manual  
IV. Tap “Print” button at the bottom-right of the  
screen to print.  
7.2 Print a Photo Image  
I. Tap “Print” on Top Menu screen.  
II. Tap “Photo” or “Photo Album.”  
15  
Copyright © 2012 SHARP CORPORATION All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Sharpdesk Mobile Operation Manual  
III. The photo images stored in Photo or Photo  
Album are listed.  
IV. Tap any thumbnail to preview the image.  
V. Tap “Printer” button to select printer to print.  
Tap “Quantity” to configure print quantity.  
Quantity can be configured from 1 set to 99  
sets.  
Tap “Duplex Setting” to configure 1-side print  
or 2-sided print. Regarding 2-sided print, it can  
be configured along with binding direction of  
Tablet or Book.  
(note) other settings than quantity and duplex  
setting cannot be configured.  
Tap “Print” to print the image.  
16  
Copyright © 2012 SHARP CORPORATION All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sharpdesk Mobile Operation Manual  
8 Send to E-mail  
The scanned document stored in the device can be attached to E-mail.  
I. Tap “Send to E-mail” on Top Menu screen.  
II. The scanned documents stored in the device  
by Scan function (See Chapter 6 of page 11)  
and documents sent from another application  
(See Chapter 11 of page 20) are listed by  
year/month at the time of the scanning.  
Tap any document to preview.  
III. The content of the selected document is  
displayed.  
Tap “Attach” at the bottom-right of the screen.  
E-mail application is invoked and the e-mail  
that the document is attached is displayed.  
Send the e-mail after editing it.  
17  
Copyright © 2012 SHARP CORPORATION All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Sharpdesk Mobile Operation Manual  
9 Send to Application  
The scanned documents stored in this application can be sent to other application.  
I. Tap “Send to Application” on Top Menu screen.  
II. The scanned documents stored in the device  
by Scan function (see Chapter 6 of page 11)  
and documents sent from another application  
(See Chapter 11 of page 20) are listed by  
year/month at the time of scanning.  
Tap any document to preview.  
III. The content of the selected document is  
displayed.  
Tap “Send to Application” at the bottom-right of  
the screen.  
IV. The applications that this data can be sent are  
listed.  
Tap any application to send this data to then  
the application is invoked.  
18  
Copyright © 2012 SHARP CORPORATION All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Sharpdesk Mobile Operation Manual  
10 Organize  
The scanned data stored in the application can be organized.  
II. The scanned documents stored by “Scan”  
function (see Chapter 6 of page 11) and  
documents sent from another application (See  
Chapter 11 of page 20) are listed by  
year/month at the time of scanning.  
Tap any document to preview its image.  
III. Tap “Delete this File” at the bottom-right of the  
screen to delete this data.  
IV. Swiping the document in the list also enables  
user to delete it.  
swipe  
I. Tap “Organize” button on Top Menu screen.  
19  
Copyright © 2012 SHARP CORPORATION All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Sharpdesk Mobile Operation Manual  
11 Print from External Application  
The data sent from other application in the device can be printed by this application.  
I. Open the file that you wish to print (JPEG, PDF  
or TIFF) in other application.  
II. Tap  
to send the file to another application.  
Menu is displayed, and then tap “Open In...”  
III. “Sharpdesk M” is listed as one of the  
applications that can receive this file.  
Then tap ”Sharpdesk M”.  
IV. The rest of the operation is the same as step  
IV and after of “Print a scanned document” in  
Chapter 7 of page 14.  
20  
Copyright © 2012 SHARP CORPORATION All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 

Singer Sewing Machine 115 1 User Manual
Sony Home Theater System DAV DZ250M User Manual
Southern Pride Smoker SPK 500 SL User Manual
SRS Labs Stereo Amplifier SR560 User Manual
StarTechcom Laptop Docking Station USB3SMDOCKV User Manual
Steren Network Card 550 010 User Manual
Sub Zero Refrigerator 424G 424FSG User Manual
Sunbeam Hot Beverage Maker KE8510 User Manual
Sungale Tablet ID1018WTA User Manual
Tamron Camera Lens A031 User Manual