Sharp TV DVD Combo LC 32DV28UT User Manual

LC-26DV28UT

LC-32DV28UT

COMBINATION LIQUID CRYSTAL TELEVISION

AND DVD/CD PLAYER

COMBINÉ TÉLÉVISEUR ACL ET LECTEUR DVD/CD

COMBINACION TELEVISOR CON PANTALLA DE

CRISTAL LÍQUIDO CON DVD/DISCOS COMPACTOS

OPERATION MANUAL

MODE D’EMPLOI

MANUAL DE OPERACIÓN

IMPORTANT

Please read this operation manual before starting operating the equipment.

Veuillez lire ce mode d'emploi avant de commencer à utiliser l'appareil.

IMPORTANTE : Lea este manual de operación antes de comenzar a operar el equipo.

Download from Www.Somanuals.com. All Manuals Search And Download.

LC-26DV28UT

LC-32DV28UT

COMBINATION LIQUID CRYSTAL TELEVISION

AND DVD/CD PLAYER

ENGLISH

OPERATION MANUAL

IMPORTANT:

Model No.:

Serial No.:

• To aid reporting in case of loss or theft, please record

the TV/DVD’s model and serial numbers in the space

provided. The numbers are located at the rear of the

TV/DVD.

Location of the required Marking

CLASS 1

LASER PRODUCT

The rating sheet and the safety caution are on

the rear of the unit.

CERTIFICATION: COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J.

COMPLIES WITH FDA PERFORMANCE STANDARDS FOR LASER PRODUCTS EXCEPT FOR DEVIATIONS PURSUANT

TO LASER NOTICE NO. 50, DATED JUNE 24, 2007.

IMPORTANT INFORMATION

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

The lightning flash with arrow-head

symbol, within an equilateral triangle,

is intended to alert the user to the

presence of uninsulated “dangerous

voltage” within the product’s

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

enclosure that may be of sufficient

magnitude to constitute a risk of

electric shock to persons.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The exclamation point within a

triangle is intended to alert the user

to the presence of important

operating and maintenance

(servicing) instructions in the

literature accompanying the product.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT INFORMATION

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY

INSERT.

WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly

approved by the manufacturer could void the user’s authority to operate this equipment.

CAUTION:

This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other

equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded

cables and connectors for connections.

“Note to CATV system installer:This reminder is provided to call the CATV system installer’s attention to Article 820-40 of

the National Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground

shall be connected to the grounding system of the building, as close to the point of cable entry as practical.”

This product utilizes tin-lead solder, and fluorescent lamp containing a small amount

of mercury. Disposal of these materials may be regulated due to environmental

considerations. For disposal or recycling information, please contact your local

authorities, the Electronic Industries Alliance: www.eiae.org, the lamp recycling

organization: www.lamprecycle.org or Sharp at 1-800-BE-SHARP (For U.S.A. Only)

DECLARATION OF CONFORMITY

SHARP COMBINATION LIQUID CRYSTAL TELEVISION AND DVD CD PLAYER, MODEL LC-26DV28UT/LC-32DV28UT.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference

that may cause undesired operation.

RESPONSIBLE PARTY:

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07495-1163

TEL: 1-800-BE-SHARP

For Business Customers: URL http://www. sharpusa. com

INFORMATION:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

License information

* This product incorporates copy protection technology that is protected by U.S. and other intellectual property rights. The

use of Rovi Corporation’s copy protection technology in the product must be authorized by Rovi Corporation. Reverse

engineering or disassembly is prohibited.

* Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby

Laboratories.

* DVD Logo is a trademark of DVD Format/Logo Licensing Corporation.

* This product is protected by certain intellectual property rights of Microsoft. Use or distribution of such technology

outside of this product is prohibited without a license from Microsoft.

* “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI

Licensing LLC.”

* Manufactured under license under U.S. Patent #: 5,451,942 & other U.S. and worldwide patents issued & pending. DTS

and the Symbol are registered trademarks and DTS Digital Out and the DTS logos are trademarks of DTS, Inc. Product

* Products that have earned the ENERGY STAR^®are designed to protect the environment through superior energy

efficiency.

Download from Www.Somanuals.com. All Manuals Search And Download.

DEAR SHARP CUSTOMER

Thank you for your purchase of the Sharp Combination Liquid Crystal Television and DVD/CD player.

To ensure safety and many years of trouble-free operation of your product, please read the Important

Safety Instructions carefully before using this product.

IMPORTANT SAFETY INSTRUCTIONS

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if

improperly handled. This product has been engineered and manufactured with the highest priority on safety. However,

improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following

instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of

your Liquid Crystal Television, please read the following precautions carefully before using the product.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with

one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or

the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician

for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid

injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in

any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Additional Safety Information

15) Power Sources—This product should be operated only from the type of power source indicated on the marking

label. If you are not sure of the type of power supply to your home, consult your product dealer or local power

company. For products intended to operate from battery power, or other sources, refer to the operating

instructions.

16) Overloading—Do not overload wall outlets, extension cords, or integral convenience receptacles as this can

result in a risk of fire or electric shock.

17) Object and Liquid Entry—Never push objects of any kind into this product through openings as they may touch

dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any

kind on the product.

18) Damage Requiring Service—Unplug this product from the wall outlet and refer servicing to qualified service

personnel under the following conditions:

a) When the AC cord or plug is damaged,

b) If liquid has been spilled, or objects have fallen into the product,

c) If the product has been exposed to rain or water,

d) If the product does not operate normally by following the operating instructions.

Adjust only those controls that are covered by the operating instructions as an improper adjustment of other

controls may result in damage and will often require extensive work by a qualified technician to restore the

product to its normal operation,

e) If the product has been dropped or damaged in any way, and

f) When the product exhibits a distinct change in performance - this indicates a need for service.

19) Replacement Parts—When replacement parts are required, be sure the service technician has used replacement

parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized

substitutions may result in fire, electric shock, or other hazards.

20) Safety Check—Upon completion of any service or repairs to this product, ask the service technician to perform

safety checks to determine that the product is in proper operating condition.

21) Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product according

to the method recommended by the manufacturer.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL

ELECTRICAL CODE, ANSI/NFPA 70

• Outdoor Antenna Grounding — If an outside antenna is

connected to the television equipment, be sure the antenna

system is grounded so as to provide some protection against

voltage surges and built-up static charges. Article 810 of the

National Electrical Code, ANSI/NFPA 70, provides information

with regard to proper grounding of the mast and supporting

structure, grounding of the lead-in wire to an antenna discharge

unit, size of grounding conductors, location of antenna-

discharge unit, connection to grounding electrodes, and

requirements for the grounding electrode.

ANTENNA LEAD

IN WIRE

GROUND

CLAMP

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

ELECTRIC

SERVICE

EQUIPMENT

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC — NATIONAL ELECTRICAL CODE

• Water and Moisture — Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or

laundry tub; in a wet basement; or near a swimming pool; and the like.

•

Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can

cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand,

tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall,

be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.

• Selecting the location — Select a place with no direct sunlight and good ventilation.

• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these

vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not

place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product

is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack,

unless proper ventilation is provided or the manufacturer’s instructions are followed.

• The Liquid Crystal panel used in this product is made of glass. Therefore, it can break when the product is dropped or

applied with impact. Be careful not to be injured by broken glass pieces in case the panel breaks.

• Heat — The product should be situated away from heat sources such as radiators, heat registers, stoves, or other

products (including amplifiers) that produce heat.

• The Liquid Crystal panel is a very high technology product with 1,049,088 pixels, giving you fine picture details.

Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that

this does not affect the performance of your product.

• Lightning — For added protection for this television equipment during a lightning storm, or when it is left unattended

and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent

damage to the equipment due to lightning and power-line surges.

•

Power Lines — An outside antenna system should not be located in the vicinity of overhead power lines or other electric

light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

• To prevent fire, never place any type of candle or flames on the top or near the TV set.

• To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items.

• Do not display a still picture for a long time, as this could cause an afterimage to remain.

• To prevent fire or shock hazard, do not expose this product to dripping or splashing.

No objects filled with liquids, such as vases, should be placed on the product.

• Do not insert foreign objects into the product. Inserting objects in the air vents or other openings may result in fire or

electric shock. Exercise special caution when using the product around children.

• CONDENSATION — Moisture will form in the operating section of the player if the player is brought from cool

surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, player’s

performance will be impaired. To prevent this, let the player stand in its new surroundings for about an hour before

switching it on, or make sure that the room temperature rises gradually. Condensation may also form during the

summer if the player is exposed to the breeze from an air conditioner. In such cases, change the location of the player.

•

DISC SLOT — Keep your fingers well clear of the disc slot as it is closing. Failure to do so may cause serious personal injury.

• LASER BEAM — Do not look into the opening of the disc slot or ventilation opening of the product to see the source of

the laser beam. Doing so may cause sight damage.

• DISC — Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious

personal injury and product malfunction.

Precautions when transporting the TV

• When transporting the TV, never carry it by holding or otherwise putting pressure onto the display. Be sure to always

carry the TV by two people holding it with two hands — one hand on each side of the TV.

Caring for the Cabinet

• Use a soft cloth (cotton, flannel, etc.) and gently wipe the surface of the cabinet.

•

Using a chemical cloth (wet/dry sheet type cloth, etc.) may deform the components of the main unit cabinet or cause cracking.

• Wiping with a hard cloth or using strong force may scratch the surface of the cabinet.

• If the cabinet is very dirty, wipe with a soft cloth (cotton, flannel, etc.) soaked in neutral detergent diluted with water

and thoroughly wrung out, and then wipe with a soft dry cloth.

• The cabinet is primarily made of plastic. Avoid using benzene, thinner, and other solvents, as these may deform the

cabinet and cause the paint to peel off.

• Do not apply insecticides or other volatile liquids.

Also, do not allow the cabinet to remain in contact with rubber or vinyl products for a long period of time. Plasticizers

inside the plastic may cause the cabinet to deform and cause the paint to peel off.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

Caring for the Liquid Crystal panel

• Turn off the main power and unplug the AC cord from the wall outlet before handling.

• Gently wipe the surface of the display panel with a soft cloth (cotton, flannel, etc.).

To protect the display panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/

dry sheet type cloth, etc.). This may damage the surface of the display panel.

• Wiping with a hard cloth or using strong force may scratch the surface of the display panel.

• Use a soft damp cloth to gently wipe the display panel when it is really dirty.

(It may scratch the surface of the display panel when wiped strongly.)

• If the display panel is dusty, use an anti-static brush, which is commercially available, to clean it.

• To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved cleaning cloths are

available directly from Sharp in single (00Z-LCD-CLOTH) or triple (00Z-LCD-CLOTH-3) packs. Call 1-800-BE-SHARP

for ordering, or VISIT www.sharpusa.com/SharpDirect.

CHILD SAFETY

It Makes A Difference How and Where You Use Your Flat Panel Display

Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:

THE ISSUE

• The home theater entertainment experience is a growing trend and larger flat panel

displays are popular purchases. However, flat panel displays are not always supported on

the proper stands or installed according to the manufacturer’s recommendations.

• Flat panel displays that are inappropriately situated on dressers, bookcases, shelves,

desks, speakers, chests or carts may fall over and cause injury.

THIS MANUFACTURER CARES!

• The consumer electronics industry is committed to making home entertainment enjoyable

and safe.

TUNE INTO SAFETY

• One size does NOT fit all. Follow the manufacturer’s recommendations for the safe

installation and use of your flat panel display.

• Carefully read and understand all enclosed instructions for proper use of this product.

• Don’t allow children to climb on or play with furniture and television sets.

• Don’t place flat panel displays on furniture that can easily be used as steps, such as a

chest of drawers.

• Remember that children can become excited while watching a program, especially on

a “larger than life” flat panel display. Care should be taken to place or install the display

where it cannot be pushed, pulled over, or knocked down.

• Care should be taken to route all cords and cables connected to the flat panel display

so that they cannot be pulled or grabbed by curious children.

WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL

DISPLAY, ALWAYS:

• Use a mount that has been recommended by the display manufacturer and/or listed by

an independent laboratory (such as UL, CSA, ETL).

• Follow all instructions supplied by the display and wall mount manufacturers.

• If you have any doubts about your ability to safely install your flat panel display, contact

your retailer about professional installation.

• Make sure that the wall where you are mounting the display is appropriate. Some wall

mounts are not designed to be mounted to walls with steel studs or old cinder block

construction. If you are unsure, contact a professional installer.

• A minimum of two people are required for installation. Flat panel displays can be heavy.

Note: CEA is the preeminent trade association promoting growth in the $161 billion U.S.

consumer electronics industry. More than 2,200 companies enjoy the benefits of CEA

membership, including legislative advocacy, market research, technical training and

education, industry promotion and the fostering of business and strategic relationships.

Download from Www.Somanuals.com. All Manuals Search And Download.

Disc

■ Discs which can be played back

■ Discs which cannot be played back

In this unit, use only discs that meet the standard, such

as those bearing the below logo marks on the disc label

surface. If you use a non-standard disc, we cannot

guarantee playback. Even if such a disc can be played back,

we cannot guarantee the image or sound quality.

The DVD logo is a registered trademark.

The discs listed below cannot be played back in general.

Even if one of these can be played back, it may not be

played back correctly. If a disc is played back by mistake,

extensively loud sounds may blow the speakers or may

damage the hearing of those in hearing range. Do not

playback the discs listed below.

CDG, Photo-CD, CD-ROM, CD-TEXT, CD-EXTRA,

SACD, PD, DVD-ROM, SVCD, CVD, VCD, DVD-RAM,

DVD+R/RW, DVD audio, HD DVD, Blu-ray, etc.

Media type

Logo mark

DVD-Video

DVD-R/RW

The following DVD-Video discs may not be played back

on this unit:

• DVD-Video that do not have the region number “1” or

“ALL”.

(Video format only)

• Prohibited or business-use DVD-Video.

Audio CD*

CD-R/CD-RWs cannot be played back for the following

reasons.

• Compatibility of the disc and this unit.

• Compatibility of the disc and the recorder used.

• Unfinalised discs.

CD-R/CD-RW (CD-DA, MP3, WMA

or JPEG format)

Never use the following discs or accessories. It may

cause serious damage to the TV/DVD.

• Irregular shaped discs such as card shaped, heart shaped

• The ring protector or other disc accessories

• The 8 cm disc adapter

* This unit is designed to playback music Compact Discs

(CD) that conform to the CD standard. CDs that contain

(copy-restriction) signals to protect copyrights cannot be

played back.

• Stickered or papered discs

• Some CD-R/RWs and DVD-R/RW can not be played back

depending on the recording conditions.

• Discs with scotch tape, glue or other remains of labels

• 8 cm discs can be played without an adapter.

■ Title/Chapter/Track

A DVD-Video has large partitions called “Titles”, and smaller

partitions within them called “Chapters”.

Region management information

This unit is designed and manufactured to support the

region management information that is recorded on a DVD

disc. If the region number written on the DVD disc does not

correspond to the region number of this unit, this unit cannot

play that disc.

A audio CD has other partitions called “Tracks”.

A number is allotted to each partition and these numbers are

called “title numbers”, “chapter numbers” or “track numbers”.

DVD DISC

• The region number of this unit is “1”.

TITLE 1

CHAPTER 1

TITLE 2

• The unit will play DVD-Video discs marked with labels

containing “1” or “ALL”.

CHAPTER 2

CHAPTER 1

CHAPTER 2

CHAPTER 3

Example:

ALL

Audio CD

Operating DVD-Video

• Some operations of DVD-Video may be prohibited by the

manufacturer, or some operation methods or functions of

the DVD-Video may be different from the description in

this manual.

TRACK

• If you attempt an operation that is prohibited by either the

disc or the unit, “

” will

This operation can’t be performed

appear on the TV screen. For operations prohibited by the

disc, see the information that came with the disc.

• When the menu screen or the operation guide appears

during disc playback, follow the displayed information.

Download from Www.Somanuals.com. All Manuals Search And Download.

Disc

■ Title/Chapter/Track PC-created disc

■ Playing MP3 (MPEG-1 Audio Layer-3) files

• You may not be able to play discs recorded using a

personal computer or recorder for disc compatibilities,

scratches or marks on the disc, dirty lenses of the unit or

condensation and so on.

• This unit is compatible with audio files recorded with the

following sampling frequency: 32 kHz, 44.1 kHz and 48

kHz.

• Files with extensions .mp3 or .MP3 can be played.

• For the best quality of sound, 128 kbps or higher bit rate is

recommended.

• Discs recorded using a personal computer may not be

playable in this unit due to the setting of the application

software used to create the disc. In these particular

instances, check with the software publisher for more

detailed information.

■ Copy Control CD (CCCD)

This product is designed to conform to CD-DA (Compact

Disc Digital Audio). Any other discs than CD-DA are not

guaranteed with their operation and performance in this

product.

■ Playable files

• ISO 9660 Level 1 or 2 compliant.

Romeo and Joliet file systems are both compatible with

this player.

■ Handling discs

• DRM (Digital Rights Management) protected files will not

play in this player.

Removing the Disc from its case

Be sure to hold the edge of disc. Do not touch the surface of

the disc.

For detailed information, please see the instruction

manuals or help files that came with your PC and/or

software.

Pick up the disc gently from the case.

• Do not scratch the disc.

• File structure (may differ): Up to 299 folders on a disc; up

to 648 files within each folder

• Do not get dirt on the surface of the disc.

• Do not stick a label or adhesive tape on the disc.

• Do not drop or bend the disc.

• Folder and file names can be displayed as long as they

are typed in alphabets and numbers. If folder and file

names are other than alphabets and numbers, they may

be replaced and displayed like as “_”. Garbled characters

may also be displayed in this case.

■ Playing image files

JPEG files recorded in DVD-R/-RW and CD-R/-RW can be

played.

Storing discs

• Store the disc in the case to avoid any risk of scratches,

dirt or damage.

■ JPEG file compatibility

• Image files should be saved in JPEG format.

• Files recorded in Fuji Colour CD, Kodak Picture CD or

CD-R/-RW can be played.

• Do not leave the disc exposed to direct sunlight or in hot

or humid places.

• Compatible formats: Baseline JPEG and EXIF 2.2* still

image files up to a resolution of 3072 x 2048.

*File format used by digital still cameras.

Cleaning discs

Wipe the disc with a clean, dry cloth from the center outward

toward the edges.

• Files with extensions .jpg or .JPG can be played.

• Progressive JPEG formatted files do not work.

• It may take some more time to start to play larger files than

usual.

• Do not wipe the disc in a circular motion around the

center.

• Do not use liquid or aerosol cleaners.

• JPEG files with different aspect ratio may be displayed

with black bands (either vertical or horizontal).

■ Playing Audio files

WMA and MP3 files recoded in DVD-R/-RW, CD-R/-RW can

be played.

■ Windows Media Audio (WMA) compatibility

Note on copyright

• WMA is an acronym for Windows Media Audio and

refers to an audio compression technology developed by

Microsoft Corporation.

• Unauthorized recording of copyrighted television

programs, films, video cassettes and other materials may

infringe the rights of copyright owners and be contrary to

• You can encode your files by using Windows Media

Player Ver.7, 7.1, Windows Media Player for Windows XP

or Windows Media Player 9 Series.

• When encoding your files, use only applications approved

by Microsoft Corporation. If you use non-approved

application, it may not work properly.

• This unit is compatible with audio files recorded with the

following sampling frequency: 32 kHz, 44.1 kHz and 48

kHz.

• It is not compatible with loss-less encoding.

• Files with extensions .wma or .WMA can be played.

Download from Www.Somanuals.com. All Manuals Search And Download.

Supplied accessories

Make sure the following accessories are provided with the product.

Remote control unit

(×1)

“AA” size battery (×2)

Page 10

AC cord (×1)

Page 9

Stand unit (×1)

Page 8

Operation manual (×1)

Page 10

NOTE

• Always use the AC cord supplied with the TV/DVD.

QUICK REFERENCE

Attaching the stand

• Before attaching (or detaching) the stand, unplug the AC cord from the AC input terminal.

•

Before performing work spread cushioning over the base area to lay the TV/DVD on. This will prevent it from being damaged.

CAUTION

• Attach the stand in the correct direction.

•

Be sure to follow the instructions. Incorrect installation of the stand may result in the TV/DVD falling over.

Confirm the 8 screws supplied with the TV/DVD.

Insert the stand into the openings on the bottom of the

TV/DVD.

Short screws (X4)

Long screws (X4)

(used in step 2)

(used in step 3)

Insert and tighten the 4 screws into the 4 holes on the

rear of the TV/DVD.

Hex key

Screw

Remove the covering sheet of the stand.

Attach the base to the post.

Attach the base to the 4 screws into the 4 holes on the

bottom of the base.

Hex key

Screw

Soft cushion

(Illustration is LC-26DV28UT.)

For protection, sheets

are covering the product.

Please remove these

sheets before use.

NOTE

• To detach the stand, perform the step in reverse order.

Download from Www.Somanuals.com. All Manuals Search And Download.

QUICK REFERENCE

QUICK INSTALLATION TIPS

Attach your antenna to the back of the TV/DVD.

(See page 14.)

Connect the AC plug for the TV/DVD into the wall outlet.

(Illustration is LC-26DV28UT.)

AC outlet

• Place the TV/DVD close to the AC outlet, and keep the

power plug within reach.

NOTE

• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT

TOUCH UN-INSULATED PARTS OF ANY CABLES

WITH THE AC CORD CONNECTED.

How to turn on the TV/DVD for the first time.

A) Press POWER on TV/DVD.

POWER

(Illustration is LC-26DV28UT.)

POWER indicator on the front of the TV/DVD lights

GREEN.

(Illustration is LC-26DV28UT.)

POWER indicator

NOTE

• Speaker cannot be detached from the TV/DVD.

• TV/DVD angle cannot be adjusted.

Download from Www.Somanuals.com. All Manuals Search And Download.

QUICK REFERENCE

If the remote control fails to operate TV/DVD functions, replace the batteries in the remote control unit.

1 Open the battery cover.

2 Insert two “AA” size batteries

3 Close the battery cover.

(supplied with the product).

• Place the batteries with their terminals

corresponding to the (+) and (–)

indications in the battery compartment.

NOTE

Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.

• Do not mix batteries of different types. Different types of batteries have different characteristics.

• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical

leakage in old batteries.

• Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can

cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth.

• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.

• If you will not be using the remote control unit for an extended period of time, remove batteries from it.

17” (5 m)

(Illustration is LC-26DV28UT.)

Remote control

sensor

30°

IMPORTANT:

The POWER indicator on the television should light GREEN indicating you have power to the TV/DVD.

If the POWER indicator on the television still does not light up, press POWER on the remote control to turn the

power on.

IMPORTANT:

IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE

INSTALLATION STEPS.

IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

IMPORTANT INFORMATION................................... 1

License information ................................................ 2

DEAR SHARP CUSTOMER ..................................... 3

IMPORTANT SAFETY INSTRUCTIONS.................. 3

Disc........................................................................... 6

Supplied accessories ............................................. 8

QUICK REFERENCE................................................ 8

Attaching the stand.............................................. 8

Contents................................................................. 11

Part names............................................................. 12

TV/DVD (Front).................................................. 12

TV/DVD (Left).................................................... 12

TV/DVD (Rear) .................................................. 12

Remote control unit............................................ 13

Preparation ............................................................ 14

Using the remote control unit............................. 14

Cautions regarding remote control unit.............. 14

Antennas ........................................................... 14

Using external equipment .................................... 15

Experiencing HD images ................................... 15

Types of Connection.......................................... 15

Displaying an External Equipment Image .......... 15

Connecting to External Equipment ..................... 16

Connecting a Blu-ray Disc/DVD Player or HD

Watching the DVD ................................................. 29

Preparation........................................................ 29

Turning on the power......................................... 29

Select the DVD mode ........................................ 29

Turning off the power......................................... 29

Playback procedure........................................... 29

Status display of DVD disc................................. 29

Special playback ............................................... 30

Zooming ............................................................ 30

Locating desired scene...................................... 30

A-B Repeat playback......................................... 30

Marking desired scenes..................................... 31

Changing angles................................................ 31

Changing soundtrack language......................... 31

Subtitles............................................................. 31

Using HOME MENU.......................................... 32

Play mode.......................................................... 32

Audio Settings menu.......................................... 33

Video Adjust menu ............................................ 34

Function setup....................................................... 34

Customizing The Function Settings ................... 34

Parental Control................................................. 36

Appendix................................................................ 37

Language Code List .......................................... 37

Country/Area Code List ..................................... 37

Troubleshooting................................................. 38

Troubleshooting-Error Message ........................ 38

Troubleshooting-PC mode................................. 38

Troubleshooting-DVD........................................ 39

Specifications .................................................... 40

Calling for Service................................................. 41

LIMITED WARRANTY ............................................ 41

Cable/Satellite Set-top Box.............................. 16

Connecting a VCR, Game Console, Camcorder or

Cable/Satellite Set-top Box.............................. 17

Connecting an Audio Amplifier .......................... 18

Connecting a PC................................................ 18

Displaying an image from a PC.......................... 19

PC compatibility chart........................................ 19

Watching TV........................................................... 20

Preparation........................................................ 20

Turning on the power......................................... 20

Auto Setup......................................................... 20

Select the TV mode ........................................... 20

Turning off the power......................................... 20

Changing channels............................................ 20

Auto Ch Memory................................................ 21

Skipping stored channel .................................... 21

Clear All............................................................. 21

Display the channel information......................... 21

Setting MTS/SAP stereo mode.......................... 21

Selecting the digital audio language .................. 22

View mode for 4:3 programs.............................. 22

View mode for HD programs.............................. 22

Labeling channels.............................................. 22

Closed captions and digital closed captions...... 23

Caption setup .................................................... 24

Password setting for parental control................. 24

How to enter the Lock menu.............................. 24

To clear the all V-Chip settings .......................... 24

Parental control (V-CHIP) .................................. 25

TV Parental Guidelines (TV Guidelines) ........... 25

Voluntary movie rating system (MPAA) ............. 25

Canadian rating systems ................................... 26

Canadian English ratings................................... 26

Canadian French ratings ................................... 26

How to temporarily release the V-Chip block..... 26

Other convenience functions............................... 27

Menu operation buttons..................................... 27

Quick guide for MENU operation ....................... 27

Dimensional Drawings

• The dimensional drawings for the TV/DVD set are

shown on the inside back cover.

Download from Www.Somanuals.com. All Manuals Search And Download.

Part names

TV/DVD (Front)

(Illustration is LC-26DV28UT.)

POWER indicator

NOTE

• The buttons on the main unit have the same

functions as the same buttons on the remote

control. Fundamentally, this operation manual

provides a description based on operation

using the remote control.

Remote control sensor

TV/DVD (Left)

Disc slot

EJECT button

Disc slot

Volume (VOL+/–)/◀/▶buttons

Channel /▲/▶PLAY button

Channel /▼/ꢀSTOP button

MENU button

INPUT/ENTER button

POWER button

(LC-26DV28UT)

(LC-32DV28UT)

TV/DVD (Rear)

(LC-26DV28UT)

(LC-32DV28UT)

INPUT 6 terminals

OUTPUT terminals

INPUT 2/3 terminals

ANT./CABLE in

INPUT 1 terminals

(Illustration is LC-26DV28UT.)

AC INPUT

INPUT 5 terminal

INPUT 4 terminal

NOTE

• The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.

• The examples used throughout this manual are based on the LC-26DV28UT model.

Download from Www.Somanuals.com. All Manuals Search And Download.

Part names

REV : Review playback. (See page 30.)

Remote control unit

SKIP ꢁ/ꢂ: Skip chapter to reverse or forward direction.

(See page 30.)

STILL/PAUSE: Still picture of DVD / Pause CD sound.

14 15 16

(See page 30.)

SETUP/TV MENU: TV mode - Display menu of TV /

DVD mode - Call up initial setup mode. (See pages 27,

34.)

▲/▼/◀/▶/ENTER: Select a desired item on the screen.

SLOW

: Reverse/Forward -slow motion. (See

page 30.)

EXIT/CANCEL: Turn off the menu screen / Reset

information in the menu.

10 PLAY MODE: Select playback mode. (See page 32.)

11 AUDIO: Switch the sound of TV / Change sound track

language. (See pages 21, 31.)

12 RETURN: Turn off the DVD setup menu screen.

13 A-B REPEAT: Repeat playback between A and B. (See

page 30.)

14 DISPLAY: Display the current channel (or input source)

information on the screen. (See pages 21, 29.)

15 TV/DVD: Switch between TV/AV and DVD. (See pages

20, 29.)

16 EJECT: Eject the disc. (See page 29.)

17 SLEEP: Allows you to set a time when the TV/DVD

automatically switches to standby. Each time you press

this button, the remaining time setting switches by 10

minutes up to 2 hours. This display will disappear after

a few seconds, and the sleep timer automatically starts

counting down.

• If you want to adjust the sleep timer again, you can

press this button repeatedly then change the time

setting.

• Select “Off” by pressing SLEEP repeatedly to cancel

the sleep timer.

• The TV/DVD will enter the standby mode when the

remaining time reaches zero.

18 INPUT: Select input source. (See page 15.)

19 VIEW MODE: Select the screen size. (See page 22.)

NOTE

20 VOL +/–: Set the volume.

• When using the remote control unit, point it at the TV/DVD.

(See page 10.)

• To increase the volume, press VOL+.

• To decrease the volume, press VOL–.

21 CH

: Select the channel. (See page 20.)

There is a protective film covering the face of the remote

control. Please remove this film before use.

22 MUTE: Mute the sound. “Mute” will be displayed on the

screen, and the sound is silenced. The muting feature

can be released by pressing this button again or one of

VOL +/–.

• Sound via the COAXIAL DIGITAL AUDIO OUTPUT

terminal is not muted.

23 FWD: Fast forward playback. (See page 30.)

24 PLAY: Playback. (See page 29.)

25 STOP: Stop. (See page 29.)

26 DVD MENU: Display DVD menu.

• Press ▲/▼/◀/▶ to select desired title.

27 TOP MENU: Display title menu.

• Press ▲/▼/◀/▶ to select desired title.

28 ANGLE: Change the view angle. (See page 31.)

29 ZOOM: Zoom. (See page 30.)

30 DIRECT SKIP: Locating desired scene of DVD. (See

page 30.)

POWER: Switch the power on or enters standby mode.

(See page 20.)

31 MARKER: Index (DVD). (See page 31.)

0–9: Set the channel. (See page 20.)

• (DOT) / SUBTITLE: To select 4-digit channel number.

(See page 20.) / Set subtitle. (See page 31.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Preparation

Using the remote control unit

Use the remote control unit by pointing it towards the remote control sensor on

the TV/DVD. Objects between the remote control unit and the remote control

sensor may prevent proper operation.

Cautions regarding remote control unit

• Do not expose the remote control unit to shock.

In addition, do not expose the remote control unit to liquids, and do not place in an area

with high humidity.

• Do not install or place the remote control unit under direct sunlight. The heat may cause

deformation of the remote control unit.

• The remote control unit may not work properly if the remote control sensor on the TV/DVD

is under direct sunlight or strong lighting. In such cases, change the angle of the lighting or

the TV/DVD, or operate the remote control unit closer to the remote control sensor.

Antennas

To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of

connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an

F-type connector, plug it into the antenna terminal at the rear of the TV set.

1. A 75-ohm system is generally a round cable with F-type

connector that can easily be attached to a terminal

without tools (Commercially available).

F-type connector should be

fingertightened only.

NOTICE

When connecting the RF cable to the TV set, do not tighten

F-type connector

F-type connector with tools.

If tools are used, it may cause damage to your TV set. (The

breaking of internal circuit, etc.)

75-ohm coaxial cable (round)

2. A 300-ohm system is a flat “twin-lead” cable that can be

attached to a 75-ohm terminal through a 300/75-ohm

adapter (Commercially available).

F-type connector

300-ohm twin-lead cable (flat)

75-ohm coaxial cable

Connecting Antenna Cable

Home Antenna

• Connect the antenna cable to the

TV using one of the methods in the

terminal (75-ohm)

①

Cable without a

CATV converter

Cable TV lead-In

① ② ③

④

or ).

illustration as shown (

Coaxial cable

(commercially available)

(Illustration is LC-26DV28UT.)

②

VHF/UHF antenna

Home Antenna

terminal (75-ohm)

75-ohm coaxial cable (round)

Coaxial cable

(commercially available)

③

Combination VHF/

UHF antenna

75-ohm coaxial cable (round)

300-ohm twin-lead cable (flat)

UHF

300/75-ohm adapter

VHF

(commercially available)

ANTENNA ANTENNA

④

Separate VHF/

UHF antenna

300-ohm

twin-lead cable

300-ohm twin-lead cable

75-ohm coaxial cable

Combiner

(commercially

available)

IN OUT

To TV antenna terminal

Download from Www.Somanuals.com. All Manuals Search And Download.

Using external equipment

Experiencing HD images

An HDTV without an HD source is just an ordinary TV/DVD.

To enjoy HD images on the TV/DVD, you should get HD programming from the following:

• Over-the-air broadcasting via HD quality antenna

• HD cable/satellite subscription

• HD compatible external equipment

NOTE

• For information on updating to HD programming, ask your cable/satellite service provider.

Types of Connection

Image quality differs depending on the terminal used. To enjoy clearer images, check the output terminals of your external

equipment and use its appropriate terminals for higher quality images.

• The illustrations of the terminals are for explanation purposes and may vary slightly from the actual products.

Image

Terminal on external

equipment

Cable

Terminal on the TV

Quality

HDMI-certiﬁed cable

⇒Page 16

DVI-HDMI conversion cable

DVI OUT

AUDIO

⇒Page 16

Ø 3.5 mm stereo minijack cable

Component video cable

Audio cable

⇒ Page 17

S-VIDEO cable

Audio cable

⇒ Page 17

AV cable

Standard

Quality

⇒ Page 17

Displaying an External Equipment Image

To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV/DVD.

NOTE

• For information on updating to HD programming, ask your cable/satellite service provider.

Press INPUT.

• A list of selectable sources appears.

Press 0-7 to select the input source.

• Each time INPUT is pressed, the input source toggles.

Input1

Input2

DVD

Input3

• You can also select the input source by pressing ▲/▼.

• An image from the selected source automatically displays.

Input Select

0. TV

1. Input1

2. Input2

3. Input3

4. Input4

5. Input5

6. Input6

7. DVD

[0-7]:Select

(Illustration is LC-26DV28UT.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to External Equipment

You can connect many types of external equipment to your TV/DVD. To view external source images, select the

input source from INPUT on the remote control unit or on the TV/DVD. (See page 15.)

For connecting the TV/DVD to external equipment, use commercially available cables.

CAUTION

• To protect equipment, always turn off the TV/DVD before connecting any external equipment.

• Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.

Connecting a Blu-ray Disc/DVD Player or HD Cable/Satellite Set-top Box

■ When using HDMI cable (INPUT 4 or 5):

The HDMI (High Definition Multimedia Interface) terminal is an audio-video interface that enables a connection for audio and

video signals using a single cable. The HDMI terminal supports high-resolution video input.

• Blu-ray disc player

• DVD player

Rear of the TV

• HD cable/satellite set-top box

HDMI-certified cable

(Illustration is LC-26DV28UT.)

HDMI OUT

NOTE

• Supported Audio format: Linear PCM (sampling rate 32/44.1/48kHz) and Dolby Digital.

• Digital audio cannot be output when the HDMI input.

■ When using DVI-HDMI conversion cable (INPUT 4):

• Blu-ray disc player

• DVD player

• HD cable/satellite set-top box

Rear of the TV

DVI-HDMI conversion cable

(Illustration is LC-26DV28UT.)

DVI OUT

AUDIO

Ø 3.5 mm stereo minijack cable

NOTE

• When using an DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to

connecting an DVI-HDMI conversion cable to the INPUT 4 (HDMI1) terminal, connect an audio cable to the AUDIO PC/

HDMI terminal and set “HDMI1 Audio” to “DVI”. (See page 28.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to External Equipment

■ When using Component cable (INPUT 3):

• Blu-ray disc player

• DVD player

• HD cable/satellite set-top box

Y (Green)

(Blue)

Rear of the TV

Component video cable

(Red)

COMPONENT OUT

(Illustration is LC-26DV28UT.)

AUDIO-R (Red)

AUDIO-L (White)

Audio cable

NOTE

• See page 16 for connecting a Blu-ray disc player, DVD player or an HD cable/satellite set-top box to the HDMI terminal.

Connecting a VCR, Game Console, Camcorder or Cable/Satellite Set-top Box

■ When using S-VIDEO cable (INPUT 1):

• Game Console

• Camcoder

• VCR

Rear of the TV

(Illustration is LC-26DV28UT.)

S-VIDEO cable

AUDIO-R (Red)

Audio cable

AUDIO-L (White)

■ When using Composite cable (INPUT 1 or 2):

• Game console

Rear of the TV

(Illustration is LC-26DV28UT.)

• VCR

• Camcorder

• Cable/Satellite set-top box

AUDIO-R (Red)

AV cable

VIDEO (Yellow)

AUDIO-L (White)

NOTE

• The S-VIDEO terminals take priority over the Video terminals.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to External Equipment

Connecting an Audio Amplifier

■ When using coaxial cable:

It is possible to output audio through the DIGITAL AUDIO COAXIAL terminal.

Coaxial cable

Rear of the TV

COAXIAL

DIGITAL AUDIO INPUT

(Illustration is LC-26DV28UT.)

■ When using audio cable:

This connection allows you to use an audio amplifier and external speakers, and adjust the audio level using the TV’s remote

control. (See page 28.)

Audio cable

AUDIO-R (Red)

Rear of the TV

AUDIO-L (White)

ANALOG AUDIO IN

(Illustration is LC-26DV28UT.)

Connecting a PC

■ When using HDMI cable (INPUT 4 or 5):

Rear of the TV

HDMI-certified cable

(Illustration is LC-26DV28UT.)

HDMI OUT

NOTE

• Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certified cable

to the INPUT 4 (HDMI1) terminal, connect an audio cable to the AUDIO PC/HDMI terminal and set “HDMI1 Audio” to “DVI”.

(See page 28.)

• The HDMI terminals only support digital signal.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to External Equipment

■ When using DVI-HDMI conversion cable (INPUT 4):

Rear of the TV

DVI-HDMI conversion cable

(Illustration is LC-26DV28UT.)

DVI OUT AUDIO

Ø 3.5 mm stereo minijack cable

NOTE

• When using an DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to

connecting an DVI-HDMI conversion cable to the INPUT 4 (HDMI1) terminal, connect an audio cable to the AUDIO PC/

HDMI terminal and set “HDMI1 Audio” to “DVI”. (See page 28.)

■ When using analog RGB cable (INPUT 6):

Analog RGB cable

(D-sub 15pin cable

or VGA cable)

Rear of the TV

RGB

AUDIO

Ø 3.5 mm stereo

minijack cable

(Illustration is LC-26DV28UT.)

NOTE

• When using an analog RGB cable, input the audio signal to the AUDIO PC/HDMI terminal of INPUT 6.

Displaying an image from a PC

To view an image from a PC, perform the following procedure.

①

②

Select the Input 6 (PC) mode using INPUT on the remote control or the TV/DVD set. (See page 15.)

Adjust the “Picture” items if the PC image does not come in clearly. (See page 28.)

PC compatibility chart

Horizontal

Frequency

Vertical

VESA

Resolution

720 x 400

Frequency

Standard

31.5 kHz

37.9 kHz

37.5 kHz

35.1 kHz

37.9 kHz

48.1 kHz

46.9 kHz

48.4 kHz

56.5 kHz

60.0 kHz

47.8 kHz

47.7 kHz

70 Hz

60 Hz

72 Hz

75 Hz

56 Hz

60 Hz

72 Hz

75 Hz

60 Hz

70 Hz

75 Hz

60 Hz

○

VGA

640 x 480

800 x 600

1,024 x 768

SVGA

XGA

1,280 x 768

1,360 x 768

WXGA

Download from Www.Somanuals.com. All Manuals Search And Download.

Watching TV

Preparation

Select the TV mode

Press TV/DVD to select the TV mode.

Perform the following steps before you press POWER

on the remote control unit.

Turning off the power

Insert the batteries into the remote control unit.

(See page 10.)

Press POWER on the TV/DVD, or POWER on the

Connect the antenna cable to the TV/DVD. (See

page 14.)

Plug in the AC cord to the AC outlet. (See page 9.)

remote control.

• The TV/DVD enters standby mode and the image on the

screen disappears.

• The POWER indicator on the TV/DVD changes to Red.

NOTE

Turning on the power

• If you are not going to use this TV/DVD for a long period

of time, be sure to remove the AC cord from the power

outlet.

Press POWER on the TV/DVD, or POWER on the

remote control.

• Weak electric power is still consumed even when the

power is turned off.

TV status indicator (POWER)

Lighting (Green)

Lighting (Red)

Changing channels

OFF/Standby

You can change channels in several ways.

• POWER indicator (Green): The TV/DVD is on. (“Please

wait” will appear for a few seconds on the screen.)

Method 1

Using CH

on the remote control unit or on the

TV/DVD.

Auto Setup

NOTE

The Auto Setup menu appears the first time you turn

on the TV/DVD, and assists you to select the menu

language, specify the Air/Cable setting, and program

your channels automatically.

• If your cable-TV system includes analog and digital

channels using the same channel number, your channel

up function will scroll through the analog channel first,

then the digital channel. Although it may appear as though

the channel does not change, it actually moves from the

analog to the digital channel in sequence.

IMPORTANT: Make sure that the antenna or cable TV

system connection is made!

If you use channel-down, it will move in reverse, from the

digital channel to the analog channel.

The turn on the TV/DVD, press POWER (POWER

indicator on the front of the unit changes green. It may

take approx. 10 seconds for a picture to appear on

screen.).

Method 2

Using remote control buttons 0–9, • (DOT) to select

The “Auto Setup” function begins. Press ◀/▶ to select

channels for VHF/UHF/CATV/DIGITAL.

your desired language.

Press ▲/▼ to select “TV Location”, then press ◀/▶

to select “Home” or “Store”. This product qualifies for

ENERGY STAR In Home mode default setting.

To select a 1 or 2-digit channel number (e. g., Channel 5):

Press 5

Home: Qualifies for ENERGY STAR (Backlight: Default setting)

Store: Not qualify for ENERGY STAR (Backlight: maximum)

• If you want to change this setting, you can adjust the

“Backlight” setting. (See page 28.)

NOTE

• When selecting a 1-digit channel number, it is not

necessary to press 0 before the number.

• When you enter 0–9 only, channel selection will be made

if there is no operation within a few seconds.

Press ▲/▼ to select “Signal Type”, then press ◀/▶ to

select “Cable” or “Air”.

Air:

VHF/UHF channels

To select a 3-digit channel number (e. g., Channel 115):

Press 1J1J5

Cable: CABLE TV channels

Press ▲/▼ to select “Automatic Search”, then press ▶ or

ENTER.

To select a 4-digit channel number (e. g., Channel 22.1):

Press 2J2J • (DOT) J1

The TV will begin memorizing all the channels available

in your area.

• It may take from 15 minutes to 30 minutes to complete

memorizing digital cable channels.

NOTE

Depending on the reception condition, a bar display may

not advance for several minutes, please be patient.

• When you enter 0–9 only, channel selection will be made

if there is no operation within a few seconds.

• If you press 0 by itself in “Air” reception, nothing will

happen.

NOTE

• Complete the above steps within a few seconds.

• When you enter 0–9 and • (DOT), channel selection will

be made if there is no operation within a few seconds.

• If you press ENTER in the process of “Auto Setup”, the

Auto Setup stops and changes to the normal screen.

• When you make a menu selection, your changes occur

immediately.You do not have to press EXIT to see your

changes.

Download from Www.Somanuals.com. All Manuals Search And Download.

Watching TV

Display the channel information

Auto Ch Memory

Press DISPLAY to display the current channel (or

Auto Ch Memory makes the TV/DVD look for all

input source) information on the screen.

channels viewable in the set area.

When the TV receives a digital signal, the digital

information will appear for a few seconds.

Press TV MENU and the MENU screen displays.

Press ▲/▼ to select “Channel”, then press ▶ or ENTER.

Press ▲/▼ to select “Auto Ch Memory”, then press ▶ or

ENTER.

• Channel number

• Station name

• Channel label (if preset) • Broadcast program name

• V-Chip rating

• Sleep timer

• Program guide

• Resolution

• Signal type

• Audio language

• Picture size

Press ▲/▼ to select “Signal Type”, then press ◀/▶ to

select “Cable” or “Air”.

Press ▲/▼ to select “Automatic Search”, then press ▶ or

When the TV receives an analog signal, the analog

information will appear.

ENTER.

The TV will begin memorizing all the channels available

in your area.

• Channel number • Channel label (if preset)

• V-Chip rating

• Sleep timer

• Picture size

• Signal type

• It may take from 15 minutes to 30 minutes to complete

memorizing digital cable channels.

•

Audio information (Stereo, SAP or Mono)

• Resolution

Depending on the reception condition, a bar display

may not advance for several minutes, please be

patient.

Setting MTS/SAP stereo mode

NOTE

The TV/DVD has a feature that allows reception of

sound other than the main audio for the program.

This feature is called Multi-channel Television Sound

(MTS). The TV/DVD with MTS can receive mono

sound, stereo sound and Secondary Audio Programs

(SAP). The SAP feature allows a TV/DVD station to

broadcast other information, which could be audio in

another language or something completely different

like weather information.

• Memorizing channels is best accomplished during

evening “PRIMETIME” hours, as more stations are

broadcasting digital signals. Memorizing channels can

only be accomplished while a station is broadcasting a

digital signal to set that channel into memory.

• New digital channels may be added to your area

periodically, it is recommended to perform the “Automatic

Search” procedure regularly.

Skipping stored channel

You can set channel selection disabled using CH

You can enjoy Hi-Fi stereo sound or SAP

broadcasts where available.

Press TV MENU and the MENU screen displays.

Press ▲/▼ to select “Channel”, then press ▶ or ENTER.

• Stereo broadcasts

View programs like live sporting events, shows and

concerts in dynamic stereo sound.

Press ▲/▼ to select “Add/Delete”, then press ▶ or

• SAP broadcasts

ENTER.

Receive TV broadcasts in either MAIN or SAP sound.

MAIN sound: The normal program soundtrack (either in

mono or stereo).

Press ▲/▼ to select “Add/Delete”, then press ▶ or

ENTER.

SAP sound: Listen to a second language, supplementary

commentary or other information. (SAP is mono sound.)

Press ▲/▼ to select the channel that you want to skip.

Press ◀/▶ to select “Delete” for selected channel.

Press EXIT to return to the normal screen.

If stereo sound is difficult to hear.

• Obtain a clearer sound by manually switching to fixed

mono-sound mode.

NOTE

• To add a digital channel you are watching:

Select a channel you want to add. Then select “Adding

Channel” in step 4, press ▶ or ENTER.

• To release the skipping channel:

Select “Add” in step 6.

• MTS only operates while in TV mode.

• MTS is available only when receiving analog

broadcasting, not when receiving digital broadcasting.

• When the TV receives a stereo or SAP broadcast, the

word “Stereo” or “SAP” displays on-screen if you press

DISPLAY.

Clear All

All channels are deleted from the channel memory.

Changing MTS

You can change MTS as shown below to match the

television broadcast signal.

Press TV MENU and the MENU screen displays.

Press ▲/▼ to select “Channel”, then press ▶ or ENTER.

In analog TV mode, press AUDIO and the “Audio”

Press ▲/▼ to select “Add/Delete”, then press ▶ or

menu screen displays. “MTS” will be highlighted.

ENTER.

Press AUDIO again or ◀/▶ to select “Stereo”,

Press ▲/▼ to select “Clear All”, then press ▶ or ENTER.

Press EXIT to return to the normal screen.

“SAP” or “Mono”.

Press EXIT to return to the normal screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Watching TV

Selecting the digital audio language

View mode for HD programs

When two or more audio languages are included in a

Stretch mode is available for HD programs.

Suitable for viewing wide-screen 1.78:1 aspect-ratio

programs. When viewing 1.85:1 programs, the stretch

mode will still show very thin black bands at the top

and bottom of the screen.

digital signal, you can select one of the audio languages.

In digital TV mode, press AUDIO and the “Audio

Language” menu screen displays.

Press ▲/▼ or 0-6 to select your desired language.

Press EXIT to return to the normal screen.

Labeling channels

To create channel labels

NOTE

• Digital audio is active only when receiving digital

Select a channel you want to label.

boardcasting, not when receiving analog boardcasting.

Press TV MENU, then press ▲/▼ to select

“Channel”, then press ▶ or ENTER.

View mode for 4:3 programs

Press ▲/▼ to select “Ch Label”, then press ▶ or

ENTER. The Ch Label menu will appear.

Press VIEW MODE.

• The View mode menu displays.

Press ◀/▶ to select a channel you want to label,

• The menu lists the view mode options selectable for

then press ▼.

the type of video signal currently being received.

Ch Label

Press 0–3 or ▲/▼ to select each view mode directly

while the View mode menu is still on the screen.

• Each time VIEW MODE is pressed, View Mode item

toggles.

Channel Number

15.1

Ch Label

ABC

Label Clear

• You can also select View Mode item by pressing ▲/▼.

• You can sequentially select a view mode that has its

own aspect ratio.

: Select

: Adjust ENTER : Set

Press ◀/▶ repeatedly until the character you want

appears in the first space.

Side Bar:

Suitable for viewing conventional

4:3 programs in their normal

format.

The characters rotation as follows:

, () @ / + =

SPACE

S.Stretch (Smart stretch):

Suitable for stretching 4:3

programs to fill the screen.

If the character which you desire appears, press

ENTER. Repeat this step to enter the rest of the

characters.

When you finish inputting the label name, press

ENTER.

Zoom:

Suitable for viewing wide-screen

2.35:1 anamorphic DVDs in full

screen.

Repeat steps 1-5 for other channels. You can

assign a label to each channel.

Press EXIT to return to the normal screen.

Stretch:

To erase channel labels

This mode is useful for 1.78:1 DVDs.

When viewing 1.85:1 DVDs,

stretch mode will still show very

thin black bands at the top and

bottom of the screen.

Select a channel with a label which you want to

remove.

Press TV MENU, then press ▲/▼ to select

“Channel”, then press ▶ or ENTER.

Dot by Dot (for PC/HDMI mode

only):

Press ▲/▼ to select “Ch Label”, then press ▶ or

ENTER to display the Ch Label menu.

Detects the resolution of the signal

of the image and it will be shown

on the screen with same amount of

pixels.

Press ▲/▼ to select “Label Clear”. Press ▶ or

ENTER.

Repeat steps 1-4 to erase other channel labels.

Press EXIT to return to the normal screen.

NOTE

•

You can enter to the same menu screen from “Picture” menu.

You cannot select “Side Bar” and “S.Stretch” when a 720p, 1080i

or 1080p signal is being input.

•

Some High Definition and/or Digital broadcasts may not allow you

to change the picture size.

In PC/HDMI Mode, only the “Side Bar”, “Stretch” and “Dot by Dot”

picture size features are available. In PC Mode (WXGA), only the

“Stretch” and “Dot by Dot” picture size features are available.

Download from Www.Somanuals.com. All Manuals Search And Download.

Watching TV

Tune the TV to the desired program.

Press TV MENU and the MENU screen displays.

Press ▲/▼ to select “Setup”, then press ▶ or ENTER.

Closed captions and digital closed

captions

Press ▲/▼ to select “Closed Caption”, then press

NOTE

▶ or ENTER.

• Closed Caption might not appear according to the

The Closed Caption menu will appear.

condition of the signal from the broadcasting station.

Press ◀/▶ to setting the “CC Setting” to “On”.

Your TV/DVD is equipped with an internal Closed

Caption decoder. It allows you to view conversations,

narration and sound effects as subtitles on your

TV/DVD. Closed Captions are available on some TV

programs and on some VHS home video tapes at the

discretion of the program provider.

Press ▲/▼ to select “Analog Caption” or “Digital

Caption”.

When you select “Analog Caption”, you can choose

C1, C2, C3, C4, T1, T2, T3 and T4.

When you select “Digital Caption”, you can choose

from CS1, CS2, CS3, CS4, CS5 and CS6.

Digital Closed Caption service is a new caption

service available only on digital TV programs (also

at the discretion of the service provider). It is a more

flexible system than the original Closed Caption

system, because it allows a variety of caption sizes

and font styles. When the Digital Closed Caption

service is in use, it will be indicated by the appearance

of a 3-letter abbreviation that also indicates the

language of the Digital Closed Captions: ENG

(English), SPA (Spanish), FRA (French) or other

language codes.

Press ◀/▶ to select the desired Closed Caption

mode for both Analog and Digital Caption.

Press ▲/▼ to select “CC Priority”, then press ◀ / ▶

to select “Digital CC” or “Analog CC”.

• Depending on the broadcast signal, some

Analog Captions will function with a Digital

broadcast signal. This step prevent that two kind

of captions are overlapping.

Press EXIT to return to the normal screen.

Not all programs and VHS videotapes offer closed

captions. Please look for the “ ” symbol to ensure

that captions will be shown.

NOTE

• To turn the Closed Caption feature off, setting the “CC

Setting” to “Off”.

In the Closed Caption system, there can be more than

one caption service provided. Each is identified by

its own number. The “C1” and “C2” services display

subtitles of TV programs superimposed over the

program’s picture. Generally, Closed Captions in

English are transmitted on C1 and Closed Captions in

other languages are transmitted on C2.

In the Closed Caption system, the “T1” or “T2”

services display text that is unrelated to the program

being viewed (e.g., weather or news). These services

are also superimposed over the program currently

being viewed.

NOTE

• If the program or video you selected is not closed-captioned, no captions will display on-screen.

• If text is not available in your viewing area, a black rectangle may appear on-screen. If this happens, setting the “CC

Setting” to “Off”.

• When selecting Closed Captions, the captioning will be delayed approx. 10 seconds.

• If no caption signal is received, no captions will appear, but the television will remain in the Caption Mode.

• Misspellings or unusual characters may occasionally appear during Closed Captioning. This is normal with Closed

Captioning, especially with live programs. This is because during live programs, captions are also entered live. These

transmissions do not allow time for editing.

• When Captions are being displayed, on-screen displays, such as volume and mute may be seen but may interfere with

Closed Captions.

• Some Cable TV systems and copy protection systems may interfere with the Closed Captioned signal.

• If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder may not appear or may appear with

strange characters or misspelled words. In this case, adjust the antenna for better reception or use an outdoor antenna.

• When a Digital TV Program has both Digital Closed Caption and Analog Closed Caption signals, Digital Closed Caption is

displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Watching TV

Password setting for parental

control

Caption setup

This function allows you to adjust the closed caption

screen appearance to suit your preference.

Allows you to use a password to protect certain

settings from being accidentally changed.

Press TV MENU and the MENU screen displays.

IMPORTANT:

Press ▲/▼ to select “Setup”, then press ▶ or

Three conditions must be met to enable the V-Chip

ENTER.

① Password is registered.

② V-Chip settings have been made.

③ “V-Chip” is set to “On”.

Press ▲/▼ to select “Closed Caption”, then press

▶ or ENTER.

The Closed Caption menu displays.

Press ▲/▼ to select “Digital CC Preset”, then press

◀/▶ to select “Custom”.

Setting a password

Press ▲/▼ to select “CC Advanced”, then press ▶

Press TV MENU and the MENU screen displays.

or ENTER.

Press ▲/▼ to select “Lock”, then press ▶ or

Press ▲/▼ to select the desired item, then press

ENTER.

◀/▶ to change the setting.

Select and enter a password (4 digits) using the

Press EXIT to return to the normal screen.

0–9, then press ENTER.

• “ ” appears instead of the number.

Selectable parameters available in each

adjustment item.

Enter the same password again to confirm, then

press ENTER, the password is now registered and

the Lock menu will appear on the screen.

Item

Selectable parameter

Text Size:

Text Type:

Auto, Small, Standard, Large

Changing the password

Allows you to change your current password.

Auto, Style1, Style2, Style3, Style4, Style5,

Style6, Style7

Repeat steps 1 to 3 in Setting a password.

Text Edge: Auto, None, Raised, Depressed, Uniform,

Press ▲/▼ to select “Change Password”, then

Left Shadow, Right Shadow

press ▶ or ENTER.

Enter a new password using 0–9, then press

Text Color: Auto, Black, White, Red, Green, Blue,

ENTER.

Yellow, Magenta, Cyan

Enter the same password again to confirm, then

Text

Auto, Solid, Transparent, Translucent,

Flashing

press ENTER.

Opacity:

The screen returns to Lock menu. Your new

Background Auto, Black, White, Red, Green, Blue,

Color: Yellow, Magenta, Cyan

password has been set.

Background Auto, Solid, Transparent, Translucent,

NOTE

Opacity:

Flashing

• As a precautionary measure, make a note of your

password and keep it in a familiar place.

• The “V-Chip Set (DTV)” will only be selectable when

a new rating system can be downloaded via digital

broadcasting in the U.S.

NOTE

• This feature is designed to customize Digital Captions

only.

• The “Auto” value depends on the broadcasting station.

• You cannot set both “Text Color” and “Background Color”

as a same color.

How to enter the Lock menu

• You cannot set both “Text Opacity” and “Background

Opacity” to “Transparent”.

Press TV MENU and the MENU screen displays.

Press ▲/▼ to select “Lock”, then press ▶ or

ENTER.

Input the 4-digit password by using 0–9, then press

ENTER.

The Lock menu displays.

To clear the all V-Chip settings

In the Lock menu, press ▲/▼ to select “V-Chip

Clear”, then press ▶ or ENTER.

Input the 4-digit password by using 0–9, then press

ENTER. All your settings return to the factory

settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

Watching TV

Parental control (V-CHIP)

V-CHIP might not function according to the condition of the signal from the broadcasting station.

V-CHIP is an electronic filtering device built into your TV/DVD. This tool gives parents a great degree of control

over broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing

while blocking ones judged not suitable. It does so automatically once you activate the V-CHIP feature in your

TV/DVD.

V-CHIP menu will not be selectable from the menu if you do not first configure your password.

(See page 24 for password setting for parental control.)

• The U.S. has two rating systems for viewing content: movie ratings and TV Parental Guidelines.

• The TV Parental Guidelines work in conjunction with the V-CHIP to help parents screen out inappropriate television shows

from their children.

• Movie ratings are used for original movies rated by the Motion Picture Association of America (MPAA) as watched on cable

TV and not edited for television. The V-CHIP can also be set to block MPAA-rated movies.

TV Parental Guidelines

Content

FANTASY

VIOLENCE

SEXUAL

ADULT

SEXUAL

DIALOG

TV RATING

VIOLENCE

SITUATIONS

LANGUAGE

TV-Y (All children)

TV-Y7 (Directed to older children)

TV-G (General audience)

TV-PG (Parental Guidance suggested)

TV-14 (Parents strongly cautioned)

TV-MA (Mature audience only)

Suggested

age

6: The content rating can be set, but this rating is not normally broadcast by TV stations.

X: Content rating can be set.

EXAMPLE

• If you select “TV-G”, this will automatically block the higher ratings “TV-PG”, “TV-14” and “TV-MA”.

Voluntary movie rating system (MPAA)

MOVIE RATING

Description

General audiences. All ages admitted.

PG-13

Parental guidance suggested. Some material may not be suitable for children.

Parents strongly cautioned. Some material may be inappropriate for children under 13.

Age

Restricted. Under 17 requires accompanying parent or adult guardian (age varies in some jurisdictions).

No one 17 and under admitted.

X is an older rating that is unified with NC-17 but may be encoded in the data of older movies.

NC-17

EXAMPLE

• If you select “PG-13”, this will automatically block the higher ratings “R”, “NC-17” and “X”.

NOTE

• Voluntary movie rating system only uses an age-based rating.

TV Parental Guidelines

(TV Guidelines)

Voluntary movie rating system

(MPAA)

In Lock menu, press ▲/▼ to select “V-Chip”, then

Repeat steps 1 and 2 in TV Parental Guidelines

press ◀/▶ to select “On” .

(TV Guidelines).

Press ▲/▼ to select “V-Chip Set”, then press ▶ or

Press ▲/▼ to select “Movie Rating”, then press ▶

ENTER.

or ENTER.

Press ▲/▼ to select “TV Rating”, then press ▶ or

Press ▲/▼ to select the desired rating, then press

ENTER.

Press ▲/▼/◀/▶ to select the desired rating, then

Press EXIT to return to the normal screen.

press ENTER.

Press EXIT to return to the normal screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Watching TV

Canadian rating systems

• The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission

(CRTC) policy on violence in television programming.

• While violence is the most important content element to be rated, the structure developed takes into consideration other

program content like language, nudity, sexuality and mature themes.

• When setting the V-CHIP on the Canadian system you can choose either the Canadian English ratings or the Canadian

French ratings.

Canadian English ratings

Rating

Description

Exempt: Includes news, sports, documentaries and other information programming; talk shows, music

videos, and variety programming.

Children: Intended for younger children under the age of 8 years. Pays careful attention to themes that

could threaten their sense of security and well-being.

Children over 8 years old: Contains no portrayal of violence as the preferred, acceptable, or only way to resolve

C8+

conflict; nor encourage children to imitate dangerous acts which they may see on the screen.

General: Considered acceptable for all age groups. Appropriate viewing for the entire family, contains very

little violence, physical, verbal or emotional.

Age

Parental Guidance: Intended for a general audience, but may not be suitable for younger children (under

the age of 8) because it could contain controversial themes or issues.

Over 14 Years: Could contain themes where violence is one of the dominant elements of the storyline, but

it must be integral to the development of plot or character. Language usage could be profane and nudity

present within the context of the theme.

Adults: Intended for viewers 18 years and older and might contain depictions of violence, which while

related to the development of plot, character or themes, are intended for adult viewing.

Could contain graphic language and portrayals of sex and nudity.

14+

18+

Example: If you select “G”, this will automatically block the higher ratings “PG”, “14+” and “18+”.

Canadian French ratings

Rating

Description

Exempt programming.

General: All ages and children, contains minimal direct violence, but may be integrated into the plot in a

humorous or unrealistic manner.

General but inadvisable for young children: May be viewed by a wide public audience, but could contain

8 ans+ scenes disturbing to children under 8 who cannot distinguish between imaginary and real situations.

Age

Recommended for viewing with parent.

Over 13 years: Could contain scenes of frequent violent scenes and therefore recommended for viewing

13 ans+

with parent.

16 ans+ Over 16 years: Could contain frequent violent scenes and intense violence.

18 ans+ Over 18 years: Only for adult viewing. Could contain frequent violent scenes and extreme violence.

Example: If you select “8 ans+”, this will automatically block the higher ratings “13 ans+”, “16 ans+” and “18 ans+”.

How to temporarily release the

V-Chip block

Canadian English ratings

Repeat steps 1 and 2 in TV Parental Guidelines

The V-Chip block is working and censors a broadcast,

(TV Guidelines).

“This program has been blocked!” displays.

Select “CAN ENG Rating”, then press ▶ or ENTER.

Press ▲/▼ to select E, C, C8+, G, PG, 14+ or 18+,

then press ENTER.

Press MUTE while the V-Chip is working and then

the password entering menu displays.

Enter your 4-digit password with 0–9, then press

Press EXIT to return to the normal screen.

ENTER.

At this time V-Chip block temporarily releases.

Canadian French ratings

Reactivating the temporarily released V-Chip block

Method 1: Change to the other channel.

Repeat steps 1 and 2 in TV Parental Guidelines

Method 2: Switch off the TV power.

(TV Guidelines).

NOTE

Select “CAN FRE Rating”, then press ▶ or ENTER.

Press ▲/▼ to select E ,G, 8 ans+, 13 ans+, 16 ans+

or 18 ans+, then press ENTER.

• Performing any of the two above will activate the V-Chip

block.

Press EXIT to return to the normal screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Other convenience functions

Menu operation buttons

Quick guide for MENU operation

Use the following buttons on the remote control to

example : Select Language

operate the menu.

Press TV MENU and the MENU screen displays.

Main Menu

Picture

Audio

Channel

Lock

Setup

ENTER : Set

: Select

Press ▲/▼ to select “Setup”, then press ▶ or

ENTER.

Press ▲/▼ to select “Language”.

Setup

Closed Caption

Language

Video Label

On Timer

English

Off

Auto Shut Off

Auto Setup

Reset

: Select

: Adjust

Press ◀/▶ to select the desired language.

...on the following pages the MENU can be called

in the same way as here.

Press EXIT to return to the normal screen.

NOTE

• Some menu items may not displayed depending on the

selected input source.

• If no buttons are pressed for more than approx. 60

seconds, the menu screen will return to normal Monitor

screen automatically.

TV MENU: Press to open the menu screen.

▲/▼/◀/▶: Press to select a desired item on the

screen or adjust a selected item.

ENTER: Press to go to the next step or complete

the setting.

RETURN: Press to return to the previous step.

EXIT:

Press to exit from the menu screen.

All changed settings will be saved.

: Adjust

: Select

ENTER : Set

The lower part of the menu screen is an

operational guide for the remote control.

It will change in accordance with each menu

setting screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Other convenience functions

Icon

Picture

Selected item

Description

Picture Setting

Brightness / Contrast /

Sharpness / Color / Tint

Color Temperature

Backlight

You can adjust the picture quality to your preference.

Bluish (Cool) / Neutral (Standard) / Reddish (Warm)

Backlight adjusts the screen brightness for improved picture clarity.

Use this feature to change the Black level automatically according

to the brightness of an image. The Black level will become dark in

a dark scene.

DBC

On / Off

AV Mode

Sports

For a clear-cut image emphasizing high contrast, useful for sports

viewing.

Standard

Movie

For a highly defined image in a normal lighting.

For a movie.

Memory

Allows the user to customize settings as desired.You can set the

mode for each input source.

View Mode

Film Mode

See page 22.

On / Off

A smoother motion may be obtained by setting the Film Mode to

“On” when you view a DVD from the DVD player.

To adjust the horizontal / vertical position of the image on the PC

Monitor screen. Each video standard will require a different value

for this setting.

PC Setting*

Hor Position / Ver Position

(see pages 18, 19)

Clock

Phase

To minimize any vertical bars or stripes visible on the screen background.

This must be adjusted after the frequency has been set optimize

picture quality.

Auto Adjust

On / Off

To adjust the all PC settings automatically.

DNR

DNR (Digital Noise Reduction) can reduce the roughness of the

picture.

Bass / Treble / Balance

MTS

Surround

You can adjust the sound quality to your preference.

See page 21.

Audio

Stereo / SAP / Mono

On / Off

The dynamic presence and sound created offers a thoroughly

enjoyable listening experience.

Audio Language

HDMI1 Audio

When two or more audio languages are included in a digital

signal, you can select one of the audio languages.

When you connect the HDMI device to the TV, select this setting.

When you connect the DVI device to the TV with analog audio

cords, select this setting.

HDMI

DVI

Speakers

Off

• Sound via speaker and AUDIO OUTPUT terminal are adjusted

with VOL +/– on the remote control unit or VOL +/– on the TV.

• Sound via the AUDIO OUTPUT terminal is adjusted with VOL

+/– on the remote control unit or VOL +/– on the TV.

• Sound via speaker is muted.

Add/Delete

DTV Signal

Adding Channel / Add/Delete See page 21.

/ Clear All

Channel

Select “DTV Signal”, then press ▶ or ENTER. The Digital-Signal

strength screen will appear.

If necessary, adjust the direction of the antenna to obtain the

maximum signal strength.

Auto Ch Memory

Ch Label

Signal Type / Automatic

See page 21.

Channel Number / Ch Label / See page 22.

Label Clear

See pages 24~26.

Lock

Closed Caption

Language

See page 23.

Setup

English / Français / Español You can choose from three different languages (English, French

and Spanish) for the on-screen displays.

Video Label

Let you set the input terminal displayed when using the “Input Select”

menu or channel display.

Press ▲/▼ to select the specific input source which you want to change.

Press ◀/▶ to select the new label for the selected input source.

On Timer

Off / 0h30m / 1h00m / 1h30m You can set On Timer to automatically turn on the TV. To cancel

/ 2h00m / 3h00m⋅⋅⋅12h00m the On Timer, set to “Off”.

Auto Shut Off

On / Off

In case of “Auto Shut Off” feature is “On”, if a station being viewed

stops broadcasting, the TV will automatically shut itself off after 15

minutes.

• If Auto Shut Off is “On” and the broadcast signal is weak, the TV

may automatically shut itself off. If this happens, turn Auto Shut

Off to “Off”.

Auto Setup

Reset

See page 20.

The Reset function returns your settings to the factory settings.

NOTE

* “PC Setting” is available only for PC INPUT (INPUT 6).

* When you connect the PC via HDMI input, you can setting “Hor Position” and “Ver Position” only.

* Whenever you change the PC display resolution settings and find that the characters of the PC input has rough edges or

has some flickerings, please go to PC Setting and do an “Auto Adjust” to improve the display of the PC input.

Download from Www.Somanuals.com. All Manuals Search And Download.

Watching the DVD

Preparation

On the screen, “ ” changes to “Loading” and then

playback will commence.

Perform the following steps before you press POWER

• A menu screen appear on the TV screen, if the disc

has a menu feature. In this case, press ▲/▼/◀/▶ or

ENTER to operate a menu feature.

on the remote control unit.

Insert the batteries into the remote control unit.

Press STOP to end playback.

(See page 10.)

• The unit can record where you stop a video, but it

depends on a disc you are using. Press PLAY to

resume a playback point. The unit can store a memory

of stopped point of last five discs that you have played.

When one of these discs is next loaded, you can

resume playback from where you stopped playing last

time.

Plug in the AC cord to the AC outlet. (See page 9.)

Turning on the power

Press POWER on the TV/DVD, or POWER on the

remote control.

• If you press STOP again (“Resume off” appears on the

screen), the TV/DVD will clear the stopped point.

• It is only DVD videos that a stopped point can be

stored in the unit with.

• POWER indicator (Green): The TV/DVD is on. (“Please

wait” will appear for a few seconds on the screen.)

Select the DVD mode

• You cannot save a stopped point for some discs. If a

number of discs played and stored in the unit exceeds

five, a new memory will overwrite the old stored

memory.

Press TV/DVD to select the DVD mode.

Turning off the power

Press EJECT.

Remove the disc and then press POWER.

The TV/DVD turns off.

Press POWER on the TV/DVD, or POWER on the

remote control.

• When you eject the disc, you may hear mechanism

noise, but it is not malfunction.

• The TV/DVD enters standby mode and the image on the

screen disappears.

• The POWER indicator on the TV/DVD changes to Red.

NOTE

Status display of DVD disc

• If you are not going to use this TV/DVD for a long period

of time, be sure to remove the AC cord from the power

outlet.

Press DISPLAY. The status display of the disc will

appear on the screen.

• Display messages may change at every time when you

press DISPLAY for some discs or files.

• Weak electric power is still consumed even when the

power is turned off.

NOTE

Playback procedure

• If the TV/DVD does not operate properly:

Static electricity, etc., may affect the player’s operation.

Disconnect the AC power cord once, then connect it

again.

Place the disc in the disc slot with the label side

facing forward. (If the disc has a label.) Hold the

disc without touching its surface, align it with the

guides, and place it in position.

• About inserting disc:

If the unit is slanted or moved while inserting disc, the disc

may get damage.

• If a disc is inserted during some modes other than

DVD mode, it may switch to DVD mode and then

playback may be begun automatically.

NOTE

• If a non-compatible disc is loaded, “Can’t play disc” or “Incompatible disc region number Can’t play disc” will appear on the

TV screen according to the type of loaded disc. In this case, check your disc again (see pages 6 and 36).

• Some discs may take a minute or so to start playback.

• When an 8 cm disc is placed into the disc slot, and the playback picture or menu display does not appear, press PLAY.

• A prohibition message “Depending on the disc, this operation may be prohibited” or “This operation can’t be performed”

may appear at the screen. This message means either the feature you tried is not available on the disc, or the unit cannot

access the feature at this time. This does not indicate a problem with the unit.

• When you set a single-faced disc label downwards (i.e. the wrong way up) “Loading” will appear on the display and then

“Can’t play disc” will be displayed.

• Some playback operations of DVDs may be intentionally fixed by software producers. Since this TV/DVD plays DVDs

according to the disc content recorded, some playback features may not be available. Also refer to the instructions supplied

with the DVDs.

• Do not move the unit during playback. Doing so may damage the disc.

• Use EJECT to unload and eject the disc.

• Do not put any objects other than discs on the disc slot. Doing so may cause the unit to malfunction.

• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen

menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press

POWER on your remote control once the movie is completed.

• There may be a slight delay between the button is pressed and the function activates.

Download from Www.Somanuals.com. All Manuals Search And Download.

Watching the DVD

Special playback

Locating desired scene

Fast Forward Playback

Use the title, chapter and time recorded on the disc to

locate the desired point to playback.

Press FWD during normal playback.

Each press of FWD will increase the speed of the search.

• To resume normal playback, press PLAY.

Press DIRECT SKIP during playback.

Press ▲/▼ to select the “Title Search”, “Chapter

Search”, “Time Search” or “Track Search” (Audio

CD). Then press ENTER.

Review Playback

Press REV during normal playback.

Each press of REV will increase the speed of the search.

• To resume normal playback, press PLAY.

Press Number buttons (0–9) to input the number.

• If you input a wrong number, press CANCEL.

• Refer to the package supplied with the disc to check

the numbers.

Still Playback

Press STILL/PAUSE during normal playback to pause

playback.

• To resume normal playback, press PLAY or STILL/

Press ENTER.

• Playback starts.

PAUSE.

• When you change the title, playback starts from

Chapter 1 of the selected title.

Frame Advance

Press STILL/PAUSE during normal playback.

One frame is advanced each time you press WW or XX .

• To resume normal playback, press PLAY.

• Some discs may not work in the above operation.

Slow-motion Playback

A-B Repeat playback

Press SLOW ( ) or SLOW ( ) during normal playback or

still playback.

A-B repeat playback allows you to repeat material

Each press of SLOW will change the speed of the slow.

• To resume normal playback, press PLAY.

• To resume the still playback, press STILL/PAUSE.

between two selected points.

Press A-B REPEAT during playback.

Locating a chapter or track

The start point is selected.

Press SKIP(

) Forward or SKIP(

) Reverse during

Press A-B REPEAT again.

playback to locate a chapter/track that you want to watch.

Each time you press the button, a chapter or track is

skipped.

The end point is selected.

Playback starts at the point that you selected.

Playback stops at the end point, returns to Point A

automatically, then starts again.

• To resume normal playback press A-B REPEAT

again.

NOTE

• The TV/DVD is capable of holding a still video image or On

screen display image on your television screen indefinitely.

If you leave the still video image or On screen display image

displayed on your TV for an extended period of time, you

risk permanent damage to your television screen.

NOTE

• In A-B Repeat mode, subtitles near the A or B locations

may not be displayed.

• You may not be able to set A-B Repeat during certain

scenes of the DVD.

Zooming

• A-B Repeat does not work with an interactive DVD, MP3/

WMA/JPEG-CD.

This TV/DVD will allow you to zoom in on the frame

image. You can then make selections by switching the

position of the frame.

Press ZOOM during playback.

The center part of the image will be zoomed in.

Each press of ZOOM will change the ZOOM

magnification Zoom 2× and Zoom 4×.

Press ▲/▼/◀/▶ to view a different part of the

frame.

You may move the frame from the center position

UP, DOWN, LEFT or RIGHT.

In the zoom mode press ZOOM repeatedly to

return to a 1:1 view.

NOTE

• You can select the Still Playback or Fast Forward (Review)

Playback in the zoom mode.

• Some discs may not respond to zoom feature.

Download from Www.Somanuals.com. All Manuals Search And Download.

Watching the DVD

Marking desired scenes

Changing soundtrack language

The TV/DVD stores the points that you want to watch

You can select the language when you play a

again up to 12 points.

multilingual disc.

You can resume playback from each scene.

Press AUDIO during playback.

The current soundtrack language will appear.

Marking the scenes

Current/Total

Audio

1/2

English

Dolby Digital 2/0CH

Press MARKER during playback.

Select the blank Marker using ▲/▼/◀/▶, then

press ENTER at the desired scene.

Press AUDIO repeatedly until the desired

language is selected.

• Up to 12 scenes can be selected.

• Repeat this procedure to set the other 11 scenes.

The on-screen display will disappear after a few

Press MARKER to return to the normal screen.

seconds.

Current/Total

Returning to the scenes

Audio

2/2

French

Dolby Digital 2/0CH

Press MARKER during playback or stop mode.

Press ▲/▼/◀/▶ to select the Marker 1-12.

Press ENTER.

NOTE

Playback starts from the marked scene.

• If the desired language is not heard after pressing AUDIO

several times, the language is not recorded on the disc.

• Changing soundtrack language is cancelled after

“Resume off”.

To cancel the Marker

Follow the above steps 1~2, then press CANCEL.

The initial default language or available language will be

heard if the disc is played back again.

NOTE

• Some discs may not work with the marking operation.

• The marking is cancelled when you eject the disc or turn

the power off.

Subtitles

• Some subtitles recorded around the marker may fail to

appear.

Changing the subtitle language

You can select the language when playing back a disc

recorded with multilingual subtitles.

Press SUBTITLE repeatedly during playback until

your desired language appears.

The on-screen display will disappear after a few

seconds.

Changing angles

When playing back a disc recorded with multi-angle

facility, you can change the view angle.

Current/Total

Press ANGLE during playback.

The current angle will appear.

Current/Total

Subtitle 1/2

English

Angle

1/2

Turning the subtitles off

Press SUBTITLE during playback until “Off” appears.

Press ANGLE repeatedly until the desired angle is

selected.

NOTE

• Changing subtitle language is cancelled after “Resume

off”.

NOTE

• Some functions may not work on some DVDs. You may

not be able to turn subtitles on or off or change subtitles.

While playing the DVD, the subtitle may change when:

- you eject or insert the disc.

• In case of JPEG-playback, the

90 degrees to the right.

• Depending on the DVD, you may not be able to change

the angles even if multi-angles are recorded on the DVD.

JPEG-image is rotated

- you change the title.

• In some cases, the subtitle language is not changed to the

selected one immediately.

Download from Www.Somanuals.com. All Manuals Search And Download.

Watching the DVD

Using HOME MENU

Playing a disc

Play mode

A-B repeat playback

A-B repeat playback allows you to repeat selection

between two selected points.

Press SETUP during stop mode.

HOME MENU will appear.

Press PLAY MODE

during playback.

Play Mode screen will

appear.

Play Mode

Press ▲/▼/◀/▶

HOME MENU

DVD

A-B Repeat

A(Start Point)

B(End Point)

Off

to select “Disc

Audio Settings

Video Adjust

Repeat

Random

Navigator”, then press

Program

Search Mode

Play Mode

Disc Navigator

ENTER.

Initial Settings

Press ▲/▼ to select “A-B Repeat”, then press ▶ or

ENTER

Disc Navigator

Title

Chapter

Press ▲/▼ to select

desired option, then

press ENTER.

Press ▲/▼ to select “A(Start Point)”, then press

ENTER. The start point is selected.

• Some discs may not work Disc Navigator.

• Depending on a disc, you can select Title, Chapter, or

both.

Press ▲/▼ to select “B(End Point)”, then press

ENTER.

Press ▲/▼/◀/▶ or Number Buttons (0–9) to

The end point is selected. Playback starts at the

point that you selected. Playback stops at the end

point and returns to Point A automatically, then

starts again.

select Title or Chapter, then press ENTER.

• Press

to move next/previous page.

• Press RETURN to return to previous step.

To resume normal playback

Playing a file

Select “Off” in step 3.

Press SETUP during stop mode.

HOME MENU will appear.

NOTE

Press ▲/▼/◀/▶ to select “Disc Navigator”, then

• Some discs may not work Play mode function.

• A-B Repeat playback does not work with MP3/WMA CD.

press ENTER.

Press ▲/▼ to select

Repeat playback

00:00/ 00:00

0kbps

folder, then press

Press PLAY MODE during playback.

ENTER.

Folder1

Folder2

Folder3

Folder4

Play Mode screen will appear.

Press ▲/▼ to select “Repeat”, then press ▶ or

ENTER

Press ▲/▼ to select desired repeat option, then

Press ▲/▼ to select file, then press ENTER.

• If you select JPEG file, unit shows the pictures one

after another automatically.

press ENTER.

The unit automatically starts repeat playback after

finishing the current title or chapter.

• Press SETUP to clear HOME MENU screen.

• Press RETURN to go to previous step.

To resume normal playback

Select “Repeat Off” in step 3.

NOTE

• When music files and JPEG files are recorded in one

disc, you can play simultaneously. Please select the

music file then select the JPEG file.

Random playback

Press PLAY MODE during playback.

Play Mode screen will appear.

Press ▲/▼ to select “Random”, then press ▶ or

ENTER.

Press ▲/▼ to select desired random playback

option, then press ENTER.

The unit automatically starts random playback.

To resume normal playback

Select “Random Off” in step 3.

NOTE

• You cannot play Random for programmed contents

(Random play is not permitted during Program playback).

• During Random playback, it may repeat the same title,

chapter or track.

• Random playback does not work with MP3/WMA CD.

Download from Www.Somanuals.com. All Manuals Search And Download.

Watching the DVD

Program playback

Audio Settings menu

Press PLAY MODE during playback.

The Audio Settings menu offers features for adjusting

Play Mode screen will appear.

the way discs sound.

Press ▲/▼ to select “Program”, then press or

Press SETUP during stop mode.

ENTER.

HOME MENU will appear.

Program

Current

Title:02 Chapter:001

Chapter 1-004

Press ▲/▼ to select

“Create/Edit”, then

press ENTER. “Create/

Edit” display differs,

depending on discs or

files.

Program Step

Title 1-38

01. 01

02.

Title 01

Title 02

Title 03

Title 04

Title 05

Title 06

Title 07

Title 08

Chapter 001

Chapter 002

Chapter 003

Chapter 004

Press ▲/▼/◀/▶ to

HOME MENU

DVD

03.

select “Audio Settings”,

04.

Audio Settings

Video Adjust

05.

then press ENTER.

06.

07.

Play Mode

Disc Navigator

08.

Initial Settings

Press ▲/▼/◀/▶ to select Title, Chapter, Track or

Audio Settings

Press ▲/▼/◀/▶ to

setting the option, then

press ENTER.

Equalizer

Audio DRC

Dialog

Off

File, then press ENTER.

Rock

Pop

• When you add a program, find where you want to add

it (Program Step) and select Title, Chapter or Track

then press ENTER. (It will be added to the left if File is

added.)

Live

Dance

Techno

Classic

Soft

• To go to previous step, press RETURN.

• If RETURN is pressed while programming, the content

will be deleted.

Press SETUP to save the setting.

Equalizer

Select the most suitable setting to match a category of

music that you are listening to.

• To delete a program, select Program Step that you

want to delete and press CANCEL.

Press PLAY.

Audio DRC

• To play existing programmed contents, select

“Playback Start” from Play Mode screen and press

ENTER.

• Loud sound level goes down and quiet sound level

goes up while playing. This is useful, for instance,

when you watch a film in the late night.

• It only works with Dolby Digital Sound.

• The effect depends on your AV amplifier and speakers

volume. Adjust the sound as you wish and find the

most effective setting.

• To resume normal playback, select “Playback

Stop” in Play Mode screen and press ENTER.Your

programmed contents are saved.

• To delete all programmed contents, select “Program

Delete” in Play Mode screen and press ENTER.

Dialog

NOTE

Adjust setting when you cannot hear dialogs very well.

• You can repeat the programmed contents. Select

“Program Repeat” from “Repeat” in the Play Mode

screen during Program playback.

NOTE

• It may not be very effective for some discs or files.

• You cannot play Random for programmed contents

(Random play is not permitted during Program

playback).

• In stop mode, you can also enter Play Mode screen by

selecting “Play Mode” in HOME MENU.

Locating desired scene

Press PLAY MODE during playback.

Play Mode screen will appear.

Press ▲/▼ to select “Search Mode”, then press ▶

or ENTER.

Press ▲/▼ to select desired search mode option,

then press ▶ or ENTER.

• Search Mode options differs, depending on discs or

files.

Input Title, Chapter,

Play Mode

Track or Folder number

A-B Repeat

Repeat

Title Search

Input Chapter

Chapter Search

Time Search

or Time by using

Random

Program

Number buttons (0–9)

and press ENTER.

Search Mode

• For instance, if you want to enter 1hr 4min (64:00),

input 6, 4, 0, 0.

NOTE

• You can locate desired scene in Menu screen for some

DVD video.

• In stop mode, you can also enter Play Mode screen by

selecting “Play Mode” in HOME MENU.

Download from Www.Somanuals.com. All Manuals Search And Download.

Function setup

Watching the DVD

Video Adjust menu

Customizing The Function Settings

From the Video Adjust menu you can adjust various

You can change the default settings to customize

settings that affect how the picture is presented.

performance to your preference.

Press SETUP during stop mode.

Setting procedure

HOME MENU will appear.

Press SETUP in stop mode.

Press ▲/▼/◀/▶ to select

HOME MENU

DVD

HOME MENU will appear.

“Video Adjust”, then

Audio Settings

Video Adjust

Press ▲/▼/◀/▶ to

HOME MENU

DVD

press ENTER.

Play Mode

Disc Navigator

select “Initial Settings”,

then press ENTER.

Audio Settings

Video Adjust

Initial Settings

Play Mode

Disc Navigator

Press ▲/▼/◀/▶ to

setting the option, then

press ENTER.

Video Adjust

Sharpness

Brightness

Contrast

Gamma

Initial Settings

Fine

Standard

Soft

Press ▲/▼/◀/▶ to select the desired option, then

Hue

Chroma Level

press ENTER.

Change the selection using ▲/▼/◀/▶ or ENTER,

by referring to the corresponding page 35.

Repeat steps 3 and 4 to change other option.

Press SETUP to save the setting.

To clear HOME MENU screen, press SETUP.

Sharpness

Adjust sharpness of images.

Brightness

Adjust brightness of images.

Contrast

Adjust a ratio of brightness between the brightest part and

the darkest part.

Gamma

Emphasize dark part of images.

Hue

Adjust a balance between green and red.

Chroma Level

Adjust color density. It is effective with animation or

something with high color density.

NOTE

• It may not be very effective for some discs or files.

Download from Www.Somanuals.com. All Manuals Search And Download.

Function Setup

Customizing The Function Settings

Setting

Option

Description

Digital Audio Out settings

Digital Out

Off

Digital audio is output from the digital outputs.

No digital audio output.

Dolby Digital Out

Dolby Digital

Dolby Digital encoded digital audio is output when playing a Dolby Digital

DVD disc.

Dolby Digital > PCM

DTS

Dolby Digital audio is converted to PCM audio before being output.

DTS encoded digital audio is output when playing a DTS disc. (Noise will be

output if your amplifier/receiver is not compatible with DTS audio.)

DTS Out

Off

No digital audio is output.

96kHz PCM Out

MPEG Out

96kHz > 48kHz

96kHz

MPEG

96 kHz digital audio is converted to 48 kHz for digital output.

96 kHz digital audio is output as is at 96 kHz.

MPEG encoded digital audio is output as is.

MPEG > PCM

MPEG encoded digital audio is converted to PCM audio for digital output.

Video Output settings

TV Screen 4:3 (Letter Box)

Set if you have a conventional 4:3 TV. Widescreen movies are shown with

black bars top and bottom.

4:3 (Pan & Scan)

Set if you have a conventional 4:3 TV. Widescreen movies are shown with

the sides cropped so that the image fills the screen.

16:9 (Wide)

Set if you have a widescreen TV.

Language settings

Audio Language

English/French/Spanish If there is an English, French or Spanish soundtrack on the disc, then it will

be played.

Other Language

Select to choose a language other than the ones displayed. (See Language

Code List on page 37.)

Subtitle Language English/French/Spanish If there is an English, French or Spanish subtitle on the disc, then it will be

displayed.

Other Language

Select to choose a language other than the ones displayed. (see Language

Code List on page 37.)

DVD Menu Lang.

w/Subtitle Lang.

DVD disc menus will be displayed in the same language as your selected

subtitle language, if possible.

English/French/Spanish If there is an English, French or Spanish DVD menu language on the disc,

then it will be displayed.

Other Language

Select to choose a language other than the ones displayed. (see Language

Code List on page 37.)

Subtitle Display

Off

Subtitles are displayed according to your selected subtitle language (see

above).

Subtitles are always off by default when you play a DVD disc (note that some

discs override this setting).

Display settings

Angle Indicator

Off

A camera icon is displayed on-screen during multi-angle scenes on a DVD

disc.

No multi-angle indication is shown.

Options settings

Parental Lock

See page 36.

Download from Www.Somanuals.com. All Manuals Search And Download.

Function setup

Level Change

Parental Control

Some discs are specified as not suitable for children.

Such discs can be limited not to playback with the

unit.

Initial Settings

Press

▲

▼

to select

Digital Audio Out

Video Output

Language

Parental Lock

Password Change

Level Change

Country Code

“Level Change”, then

press ENTER.

Display

Options

How to into the Parental menu

Initial Settings

Press Number buttons

(0–9) to input the

Press SETUP in stop mode.

Digital Audio Out

Video Output

Language

Parental Lock: Level Change

Password

HOME MENU will appear.

current password, then

press ENTER.

Display

Press ▲/▼/◀/▶ to select

“Initial Settings”, then

press ENTER.

HOME MENU

DVD

Options

Off

Audio Settings

Video Adjust

Play Mode

Disc Navigator

Initial Settings

Press

◀

▶

to select

Digital Audio Out

Video Output

Language

Parental Lock: Level Change

Password

from the level 1 to level

8. The limitation will be

more severe as the level

number is lower. Then

press ENTER.

Initial Settings

Display

Options

Press ▲/▼ to select “Options”, then press ▶ or

Off

ENTER

Then press ▶ or ENTER to enter the Parental Lock

menu.

Level 1: DVD software for adults cannot be played

back.

Set Password

Level 8: Virtually all DVD software can be played

back.

Initial Settings

Press

▲

▼

to select

Level Off: The parental control setting does not

Digital Audio Out

Video Output

Language

Parental Lock

Password

Level Change

Country Code

“Password”, then press

function.

ENTER.

Display

Options

Country Code

Initial Settings

Press

▲

▼

to select

Initial Settings

Press Number buttons

(0–9) to input the

password, then press

ENTER.

Digital Audio Out

Video Output

Language

Parental Lock

Password Change

Level Change

Country Code

“Country Code”, then

Digital Audio Out

Video Output

Language

Display

Options

Parental Lock: Register Code Number

press ENTER.

Display

Options

Initial Settings

Press Number buttons

(0–9) to input the

Digital Audio Out

Video Output

Language

Parental Lock: Change Country Code

Password

Change Password

current password, then

press ENTER.

Country Code List

Code

Display

Options

Initial Settings

Press

▲

▼

to select

Digital Audio Out

Video Output

Language

Parental Lock

Password Change

Level Change

Country Code

“Password Change”,

then press ENTER.

Display

Initial Settings

Press

▲

▼

to select

Options

Digital Audio Out

Video Output

Language

Parental Lock: Change Country Code

Password

the input mode from

“Country Code List” or

“Code”.

Country Code List

Code

Display

Options

Initial Settings

Press Number buttons

(0–9) to input the

Digital Audio Out

Video Output

Language

Parental Lock: Password Change

Password

current password, then

press ENTER.

• When you selected “Country Code List”: Press ▲ or ▼

to select Country Code, then press ENTER.

• When you selected “Code”: Press ▶ then use the

Number buttons (0-9) to enter the 4-digit Country

Code then press ENTER. (see Country/Area Code List

on page 37)

New Password

Display

Options

Initial Settings

Press Number buttons

(0–9) to input the

Digital Audio Out

Video Output

Language

Parental Lock: Password Change

Password

new password. Press

ENTER. Now your new

password has been set.

Be sure to remember

this number!

New Password

Display

Options

NOTE

• Depending on the discs, the unit cannot limit playback.

• Some discs may not be encoded with specific rating

level information though its disc jacket says “adult.” For

those discs, the age restriction will not work.

• If you input a wrong number, press ◀, then input

correct number.

NOTE

If you forget the password...

1. Press EJECT to remove the disc.

2. While holding STOP down on the front panel, press 7 on

the remote control for more then 2 seconds.

3. Enter a new password again.

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendix

Language Code List

Language (Language code letter), Language code

Japanese (ja), 1001

English (en), 0514

French (fr), 0618

Bhutani (dz), 0426

Esperanto (eo), 0515

Estonian (et), 0520

Basque (eu), 0521

Persian (fa), 0601

Finnish (fi), 0609

Kirghiz (ky), 1125

Sinhalese (si), 1909

Slovak (sk), 1911

Slovenian (sl), 1912

Samoan (sm), 1913

Shona (sn), 1914

Somali (so), 1915

Albanian (sq), 1917

Serbian (sr), 1918

Siswati (ss), 1919

Sesotho (st), 1920

Sundanese (su), 1921

Swahili (sw), 1923

Tamil (ta), 2001

Latin (la), 1201

Lingala (ln), 1214

German (de), 0405

Italian (it), 0920

Laothian (lo), 1215

Lithuanian (lt), 1220

Latvian (lv), 1222

Spanish (es), 0519

Chinese (zh), 2608

Dutch (nl), 1412

Fiji (fj), 0610

Malagasy (mg), 1307

Maori (mi), 1309

Faroese (fo), 0615

Frisian (fy), 0625

Portuguese (pt), 1620

Swedish (sv), 1922

Russian (ru), 1821

Korean (ko), 1115

Greek (el), 0512

Macedonian (mk), 1311

Malayalam (ml), 1312

Mongolian (mn), 1314

Moldavian (mo), 1315

Marathi (mr), 1318

Malay (ms), 1319

Irish (ga), 0701

Scots-Gaelic (gd), 0704

Galician (gl), 0712

Guarani (gn), 0714

Gujarati (gu), 0721

Hausa (ha), 0801

Hindi (hi), 0809

Afar (aa), 0101

Telugu (te), 2005

Tajik (tg), 2007

Abkhazian (ab), 0102

Afrikaans (af), 0106

Amharic (am), 0113

Arabic (ar), 0118

Maltese (mt), 1320

Burmese (my), 1325

Nauru (na), 1401

Thai (th), 2008

Croatian (hr), 0818

Hungarian (hu), 0821

Armenian (hy), 0825

Interlingua (ia), 0901

Interlingue (ie), 0905

Inupiak (ik), 0911

Indonesian (in), 0914

Icelandic (is), 0919

Hebrew (iw), 0923

Yiddish (ji), 1009

Tigrinya (ti), 2009

Turkmen (tk), 2011

Tagalog (tl), 2012

Setswana (tn), 2014

Tonga (to), 2015

Turkish (tr), 2018

Tsonga (ts), 2019

Tatar (tt), 2020

Nepali (ne), 1405

Assamese (as), 0119

Aymara (ay), 0125

Azerbaijani (az), 0126

Bashkir (ba), 0201

Byelorussian (be), 0205

Bulgarian (bg), 0207

Bihari (bh), 0208

Norwegian (no), 1415

Occitan (oc), 1503

Oromo (om), 1513

Oriya (or), 1518

Panjabi (pa), 1601

Polish (pl), 1612

Pashto, Pushto (ps), 1619

Quechua (qu), 1721

Rhaeto-Romance (rm), 1813

Kirundi (rn), 1814

Twi (tw), 2023

Bislama (bi), 0209

Bengali (bn), 0214

Tibetan (bo), 0215

Breton (br), 0218

Catalan (ca), 0301

Corsican (co), 0315

Czech (cs), 0319

Welsh (cy), 0325

Ukrainian (uk), 2111

Urdu (ur), 2118

Javanese (jw), 1023

Georgian (ka), 1101

Kazakh (kk), 1111

Greenlandic (kl), 1112

Cambodian (km), 1113

Kannada (kn), 1114

Kashmiri (ks), 1119

Kurdish (ku), 1121

Uzbek (uz), 2126

Vietnamese (vi), 2209

Volapük (vo), 2215

Wolof (wo), 2315

Xhosa (xh), 2408

Yoruba (yo), 2515

Zulu (zu), 2621

Romanian (ro), 1815

Kinyarwanda (rw), 1823

Sanskrit (sa), 1901

Sindhi (sd), 1904

Sangho (sg), 1907

Serbo-Croatian (sh), 1908

Danish (da), 0401

Country/Area Code List

Country/Area, Country/Area code, Country/Area code letter

Argentina, 0118, ar

Australia, 0121, au

Austria, 0120, at

Belgium, 0205, be

Brazil, 0218, br

Finland, 0609, fi

France, 0618, fr

Malaysia, 1325, my

Mexico, 1324, mx

Singapore, 1907, sg

Spain, 0519, es

Germany, 0405, de

Hong Kong, 0811, hk

India, 0914, in

Netherlands, 1412, nl

New Zealand, 1426, nz

Norway, 1415, no

Sweden, 1905, se

Switzerland, 0308, ch

Taiwan, 2023, tw

Canada, 0301, ca

Chile, 0312, cl

Indonesia, 0904, id

Italy, 0920, it

Pakistan, 1611, pk

Philippines, 1608, ph

Portugal, 1620, pt

Thailand, 2008, th

United Kingdom, 0702, gb

USA, 2119, us

China, 0314, cn

Denmark, 0411, dk

Japan, 1016, jp

Republic of Korea, 1118, kr

Russian Federation, 1821, ru

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendix

Troubleshooting

Problem

Possible Solution

• No power

• Check if you pressed POWER on the TV/DVD, or on the remote control unit.

(See page 20.)

• Is the AC cord disconnected? (See page 9.)

• Has the power been turned on? (See page 20.)

• Unit cannot be operated.

• External influences such as lightning, static electricity, may cause improper

operation. In this case, operate the unit after first turning off the power of the TV/

DVD or unplugging the AC cord and replugging it in after 1 or 2 minutes.

• Remote control unit does not

operate.

• Are batteries inserted with polarity (+, –) aligned? (See page 10.)

• Are batteries worn out? (Replace with new batteries.)

• Are you using it under strong or fluorescent lighting?

• Is a fluorescent light illuminated near the remote control sensor?

• Picture is cut off/with sidebar

screen.

• Are screen mode adjustments such as view mode choose made correctly? (See

page 22.)

• Strange color, light color, or color • Adjust the picture tone. (See page 28.)

misalignment

• Is the room too bright? The picture may look dark in a room that is too bright.

• Power is suddenly turned off.

• Is the sleep timer set? (See page 13.)

• Check the Auto Shut Off settings. (See page 28.)

• The unit’s internal temperature has increased.

Remove any objects blocking vent or clean.

• No picture

• No sound

• Is connection to other components correct? (See page 15.)

• Is correct input signal source selected after connection? (See page 15.)

• Is the correct input selected? (See page 15.)

• Is picture adjustment correct? (See page 28.)

• Is the volume too low? (See page 13.)

• Have you pressed MUTE on the remote control unit? (See page 13.)

• Is connection to other components correct? (See pages 15-19.)

• Is “Off ” selected in “Speakers”? (See page 28.)

• Check the audio output of the connected external equipment. Is the volume too low

or mufed?

• When external equiprnent is connected via an HDMI cable, you may need to

configure the audio to be output through the HDMI cable.

• The TV sometimes makes a

cracking sound.

• This is not a malfunction. This happens when the cabinet slightly expands and

contracts according to change in temperature. This does not affect the TV’s

performance.

Troubleshooting-Error Message

The example of an error

Possible Solution

message displayed on a screen

• Digital channel signal strength is • Check the antenna cable. Check that the antenna is correctly setup.

low

• Digital channel is scrambled

• Audio only

• It is subscription channel. Contact the service provider.

• The channel has audio contents only.

Troubleshooting-PC mode

Problem

Possible Solution

• There is no image.

• Make sure the RGB cable is properly connected. (See page 19.)

• Make sure the output signal of the PC and the input signal setting of the LCD TV set

are matched. (See page 19.)

• Some software prohibit video playback on an external display when playing back a

video with a notebook PC. This is not attributable to a problem with the LCD TV set.

• There is no sound.

• The text is blurred.

• Make sure the PC audio cable is properly connected. (See page 19.)

• Check if the mute function activates, or if the volume is set to minimum. (See page

13.)

• Adjust “Clock” and “Phase” using the PC Setting menu. (See page 28.)

• The image is not displayed in the • Adjust “Hor Position” and “Ver Position” using the PC Setting menu. (See page 28.)

center of the screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendix

Troubleshooting-DVD

Problem

Possible Solution

• Playback doesn’t start.

• No disc is inserted. (See page 29.)

• The disc may be dirty. Clean up the disc. (See page 7.)

• The TV/DVD cannot play CD-ROMs, etc. (See page 6.)

• No picture.

• No sound.

• TV/DVD selector is not set correctly. (See page 29.)

• Check the input selector of the amplifier is set properly.

• The TV/DVD is in the special playback mode. (See page 30.)

• Select the correct Audio Output position on AV amplifier.

• Picture is distorted during fast

reverse/forward playback.

• The picture will be distorted occasionally.

• Stopping playback, search,

slowmotion play, repeat play, or

program play, etc. cannot be

performed.

• Some discs may not do some of the functions.

• No surround sound.

• The setup does not match your stereo system.

• The TV/DVD or remote operation

key is not functioning.

• Turn off the TV/DVD and unplug the AC power cord for several minutes, then

replug it.

• Playback does not start when the

title is selected.

• Check the Parental setup. (See page 36.)

• Audio soundtrack and/or subtitle

language is not changed when

you playback a DVD.

• Multilingual language is not recorded on the DVD disc. (See page 31.)

• No subtitle.

• Some discs have no subtitles. (See page 31.)

• Subtitles are cleared. Press SUBTITLE. (See page 31.)

• Angle cannot be changed.

• Multi-angles are not recorded on the DVD disc. (See page 31.)

• “This operation can’t be performed” • The function is prohibited with the TV/DVD or the disc. (See page 29.)

appears on the screen.

Cautions regarding use in high and low temperature environments

• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly

delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.

• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a

heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.

Storage temperature: –4°F to +140°F (–20°C to +60°C)

CLEARING THE PASSWORD

If you forget the password, clear the password using the following procedure.

Press and hold both VOL – on the TV/DVD and

press 0 on the remote control simultaneously for

MENU screen

a few seconds until

appears on the

screen.

Now the old password was cleared. You can set

the new password.

(Illustration is LC-26DV28UT.)

The password is

NOTE

• As a precautionary measure, make a note of your password above, cut it from this manual, and keep it in a safe place.

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendix

Specifications

Item

Model: LC-26DV28UT

26” Class (26” Diagonal)

1,049,088 pixels (1366 x 768)

Model: LC-32DV28UT

32” Class (31 1/2” Diagonal)

LCD

Size

panel

Resolution

TV-standard (CCIR)

Receiving VHF/UHF

American TV Standard ATSC/NTSC System

VHF 2-13ch, UHF 14-69ch

1-135ch (non-scrambled channel only.)

Function

Channel

CATV

Digital Terrestrial 2-69ch

Broadcast (8VSB)

Digital Cable^*1

1-135ch (non-scrambled channel only.)

(64/256 QAM)

Audio multiplex

BTSC System

Audio out

5.0W x 2

Terminals Side

INPUT 1

AV in, S-VIDEO in

INPUT 2

INPUT 3

INPUT 4

INPUT 5

INPUT 6

OUTPUT

AV in

COMPONENT in, Audio in (Share with INPUT 2)

HDMI in with HDCP, Audio in

HDMI in with HDCP

15-pin mini D-sub female connector, Audio in (φ 3.5 mm stereo minijack)

Analog audio output x 1

Coaxial Digital audio output x 1 (PCM/Dolby Digital)

ANT./CABLE

75 Ω Unbalance, F Type x 1 for Analog (VHF/UHF/CATV)

and Digital (AIR/CABLE)

OSD language

Power Requirement

Power Consumption

Weight

English/French/Spanish

AC 120 V, 60 Hz

65 W (0.5 W Standby with AC 120V)

104 W (0.5 W Standby with AC 120V)

26.1 Ibs./12.0 kg

TV + stand

TV only

TV + stand

TV only

20.9 Ibs./9.5 kg

17.8 Ibs./8.1 kg

22.5 Ibs./10.0 kg

Dimension^*2

(W x H x D)

26 / x 20x 9 / inch

31 / x 23 / x 9 / inch

26 / x 18 / x 3 / inch

31 / x 21 / x 4 / inch

DVD

Signal system

Applicable disc

NTSC

section

DVD (12 cm, 8 cm), CD (12 cm, 8 cm)

DVD : 4 Hz - 44K Hz / CD : 4 Hz - 20K Hz

Below Measurable Level

CD : Wavelength: 780 - 790 nm

Maximum output power: 7 mW

DVD : Wavelength: 652 - 662 nm

Maximum output power: 5 mW

Frequency response

Wow and flutter

Pickup

Operating temperature

+41°F to +104°F (+5°C to +40°C)

^*1Emergency alert messages via Cable are unreceivable.

^*2The dimensional drawings are shown on the inside back cover.

• Typical time for power output decrease of about one-half assuming continuous use in a room with normal lighting, normal

brightness and temperature at 77°F/25°C.

• As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for

product improvement without prior notice. The performance specification figures indicated are nominal values of production

units. There may be some deviations from these values in individual units.

Download from Www.Somanuals.com. All Manuals Search And Download.

Calling for Service

For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or

customer assistance, please call 1-800-BE-SHARP.

LIMITED WARRANTY

CONSUMER LIMITED WARRANTY

SHARP ELECTRONICS CORPORATION warrants to the ﬁrst consumer purchaser that this Sharp brand Liquid Crystal Display product (the

“Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option,

either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the

purchaser for parts or labor for the period(s) set forth below.

This warranty does not apply to any appearance items of the Product or if the serial number or model number afﬁxed to the Product has

been removed, defaced, changed, altered or tampered with. This warranty does not cover installation or signal reception problems. This

limited warranty will not apply if the Product has been or is being used in a commercial setting or application; this warranty is meant solely

for the non-commercial, household use of the Product by consumers in their home or residence. If you intend to or already use this Product

for commercial purposes or in a commercial setting, there are warranties available to cover your use of this Product, the terms of which may

vary. Please contact 1-888-GO-SHARP for further information.

In order to enforce your rights under this limited warranty, you should follow the steps set forth below. You must be able to provide proof of

purchase to the servicer, which proof must include the date of purchase.

To the extent permitted by applicable state law, the warranties set forth are in lieu of, and exclusive of, all other warranties, express or

implied. Speciﬁcally ALL OTHER WARRANTIES OTHER THAN THOSE SET FORTH ABOVE ARE EXCLUDED, ALL EXPRESS AND

IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR USE, AND FITNESS FOR A PARTICULAR

PURPOSE ARE SPECIFICALLY EXCLUDED. IF, UNDER APPLICABLE STATE LAW, IMPLIED WARRANTIES MAY NOT VALIDLY BE

DISCLAIMED OR EXCLUDED, THE DURATION OF SUCH IMPLIED WARRANTIES IS LIMITED TO THE PERIOD(S) FROM THE DATE OF

PURCHASE SET FORTH BELOW. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS

WHICH VARY FROM STATE TO STATE.

The warranties given herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy

available to the purchaser and only for the time periods set forth herein. No other representations or promises made by anyone are

permitted. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulﬁllment of all

liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims,

whether based on contract, negligence, strict liability or otherwise. Sharp does not warrant nor shall Sharp be liable, or in any way

responsible, for Products which have been subject to abuse (including, but not limited to, improper voltage), accident, misuse, negligence,

lack of reasonable care, alteration, modiﬁcation, tampering, misuse, improper operation or maintenance or any damages or defects in the

Product which were caused by repairs or attempted repairs performed by anyone other than a Sharp authorized servicer. Nor shall Sharp

be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow limits on

warranties or on remedies for breach in certain transactions; in such states, the limits herein may not apply.

THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND PUERTO RICO.

Model Speciﬁc Section

Your Product Model Number & Description:

LC-26DV28UT/LC-32DV28UT Combination Liquid Crystal Television And

DVD/CD player

(Be sure to have this information available when you need service for your

Product.)

Warranty Period for this Product:

One (1) year parts and labor from the date of purchase.

Additional Exclusions from

Warranty Coverage (if any):

In order for the Product to be serviced, the Product must be readily available

to the servicer, free and clear of any complex or non-standard installation,

mounting or other encumbrance which would unreasonably interfere with

servicing the Product. The Servicer will remount the Product after service,

provided that such remounting is not into a complex or non-standard installa-

tion. Any additional labor and materials required to remove and/or reinstall a

Product above and beyond the foregoing are not covered by this warranty,

may result in additional charges and are the responsibility of the consumer.

Image Retention resulting from a ﬁxed image being displayed for long

periods of time is not covered by this Limited Warranty (see Operation

Manual on how to prevent this).

Where to Obtain Service:

From a Sharp Authorized Servicer located in the United States. To ﬁnd the

location of the nearest Sharp Authorized Servicer, please call Sharp toll free

at 1-800-BE-SHARP.

What to do to Obtain Service:

LC-32DV28UT

Contact your Sharp Authorized Servicer to obtain in home service for this

product. The Servicer will come to your location and if necessary remove the

unit for repair at the Servicer’s facility and return the set to you once

completed. Be sure to have Proof of Purchase available.

Ship prepaid or carry in your Product to a Sharp Authorized Servicer. Be sure

to have proof of purchase available. If you ship the Product, be sure it is

insured and packaged securely. Please use two persons to carry the Product,

transport it in its original packaging, and ensure that the Product is covered

to avoid scratches and damage. Sharp shall not be responsible for lost,

stolen or misdirected mail or for damage to the product incurred during

shipping.

LC-26DV28UT

TO OBTAIN PRODUCT INFORMATION OR PURCHASE ACCESSORIES AND EXTENDED WARRANTIES, CALL 1-800-BE-SHARP

OR VISIT www.sharpusa.com

Download from Www.Somanuals.com. All Manuals Search And Download.

SIIG Computer Hardware SATA II 150 User Manual
Sony Camcorder VCLHG1730A User Manual
Sony Clock Radio ICF C707 User Manual
Sony Flat Panel Television XBR 65X900A 55X900A User Manual
Sony Laptop BPLX55 BP User Manual
Sony Portable CD Player CFD 222L User Manual
Sony Stereo System AVD C70ES User Manual
Sony Universal Remote DAV SR2 User Manual
Stamina Products Home Gym 55 2010 User Manual
Sylvania Portable DVD Player DP170SL9 User Manual