MICRO COMPONENT SYSTEM
MODEL
XL-DH10NH
XL-DH20NH
OPERATION MANUAL
Thank you for purchasing this SHARP product. To obtain the best performance from this product, please
read this manual carefully. It will guide you in operating your SHARP product.
XL-DH10NH Micro Component System consisting of XL-DH10NH (main unit) and CP-DH10NH (speaker system).
XL-DH20NH Micro Component System consisting of XL-DH20NH (main unit) and CP-DH20NH (speaker system).
XL-DH10NH
XL-DH20NH
CD
CD
USB
USB
MUTE
MUTE
IMER
CLOCK
LOCK/TIMER
CLO
OCK/TIMER
/
UNING/
TUNING
T
FOLDER
FOLDER
PTY
PTY
RDS
RDS
AUX
AUX
iPod is a trademark of Apple Inc.,
registered in the U.S. and other countries.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
●
●
Do not remove the outer cover, as this may result
in electric shock. Refer internal service to your
local SHARP service facility.
The ventilation should not be impeded by covering the
ventilation openings with items, such as newspapers,
tablecloths, curtains, etc.
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
Attention should be drawn to the environmental
aspects of battery disposal.
This unit should only be used within the range of 5˚C -
35˚C (41˚F - 95˚F).
The apparatus is designed for use in moderate
climates.
■
General
●
Please ensure that the equipment is positioned in a
well ventilated area and ensure that there is at least 10
cm (4") of free space along the sides, top and back of
the equipment.
●
●
●
●
10 cm (4") 10 cm (4")
10 cm (4")
10 cm (4")
●
●
Use the unit on a firm, level surface free from vibration.
Keep the unit away from direct sunlight, strong
magnetic fields, excessive dust, humidity and
electronic/electrical equipment (home computers,
facsimiles, etc.) which generate electrical noise.
Do not place anything on top of the unit.
Do not expose the unit to moisture, to temperatures
higher than
temperatures.
Warning:
The voltage used must be the same as that specified on
this unit. Using this product with a higher voltage other
than that which is specified is dangerous and may result
in a fire or other type of accident causing damage. SHARP
will not be held responsible for any damage resulting from
use of this unit with a voltage other than that which is
specified.
●
●
60˚C (140˚F) or to extremely low
●
If your system does not work properly, disconnect the
AC power lead from the wall socket. Plug the AC power
lead back in, and then turn on your system.
In case of an electrical storm, unplug the unit for safety.
Hold the AC power plug by the head when removing it
from the wall socket, as pulling the lead can damage
internal wires.
■
Volume control
The sound level at a given volume setting depends on
speaker efficiency, location and various other factors. It is
advisable to avoid exposure to high volume levels, to avoid
this, do not turn the volume on to full at switch on and listen
to music at moderate levels. Excessive sound pressure
from earphones and headphones can cause hearing loss.
●
●
●
The AC power plug is used as a disconnect device and
shall always remain readily operable.
Controls and indicators
1
■
Front panel
Page
1. iPod Docking Station. . . . . . . . . . . . . . . . . . . . . . . 8
2. Remote Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3. Timer Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . 19
4. On/Stand-by Button. . . . . . . . . . . . . . . . 6, 8, 10, 19
5. Function Button. . . . . . . . . . . . . . . . . . . . . 9, 10, 13
6. Disc Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
7. Headphone Socket . . . . . . . . . . . . . . . . . . . . . . . 21
2
3
4
8
8. Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
9. Disc / USB / iPod Play or Pause or
9
Stop Button . . . . . . . . . . . . . . . . . . . . . . . . 9, 10, 13
10. Disc Tray Open / Close Button . . . . . . . . . . . . . . 10
11. USB Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5
10
6
7
11
■
Speaker system (CP-DH20NH)
Tweeter
■
Speaker system (CP-DH10NH)
1.
Full Range
1.
2.
3.
3
2
Woofer
Bass Reflex Duct
Speaker Wire
2.
3.
4.
1
Bass Reflex Duct
Speaker Wire
1
2
3
4
Download from Www.Somanuals.co3m. All Manuals Search And Download.
Controls and indicators (continued)
1
■
Remote control
Page
1. Remote Control Transmitter . . . . . . . . . . . . . . . . . 6
2. On / Stand-by Button. . . . . . . . . . . . . . 6, 7, 8, 9, 19
3. Direct Search Buttons. . . . . . . . . . . . . . . . . . . . . 10
4. Play Mode Button . . . . . . . . . . . . . . . . . . 10, 11, 14
5. iPod Display (TV OUT) Button . . . . . . . . . . . . . . . 5
6. CD / USB Stop Button . . . . . . . . . . . . . . . . . . 10, 13
7. CD / USB Display Button. . . . . . . . . . . . . . . . 12, 13
8. Mute Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
9. Volume Up or Down Buttons . . . . . . . . . . . . . . . . 6
10. Memory Button . . . . . . . . . . . . . . . . . . 7, 10, 15, 19
11. Clear Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 6, 11
12. Folder Up / Tuning Up Button . . . . . . . . . . . . 12, 13
13. iPod Cursor Up Button . . . . . . . . . . . . . . 12, 13, 15
14. Fast Reverse or Track Down
22
2
3
4
5
23
24
25
6
7
8
CD
USB
MUTE
26
Button . . . . . . . . . . . . . . . . . . . . . . . . 7, 9, 10, 13, 19
15. Enter Button. . . . . . . . . . . . . . . . . . . . . . . . . . . 6, 11
16. Tuning Down Button . . . . . . . . . . . . . . . . 12, 13, 15
17. Folder Down / Tuning Down Button . . . . . . . . . . . 5
18. iPod Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
19. CD Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
20. USB Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
21. AUX Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
22. Open / Close Button . . . . . . . . . . . . . . . . . . . . . . 10
23. iPod Menu Button . . . . . . . . . . . . . . . . . . . . . . . 8, 9
24. iPod Play / Pause Button. . . . . . . . . . . . . . . . . . 8, 9
25. CD / USB Play / Pause Button. . . . . . . . . . 9, 10, 13
26. X-Bass Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
27. Equaliser Mode Button . . . . . . . . . . . . . . . . . . . . . 6
28. Clock / Timer Button . . . . . . . . . . . . . . . . . . . . 7, 19
29. Sleep Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
30. Preset Up Button . . . . . . . . . . . . . . . . . . . . . . . . 15
31. Fast Forward or Track Up Button . . . 7, 9, 10, 13, 19
32. Preset Down Button . . . . . . . . . . . . . . . . . . . . . . 15
33. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . 15
34. RDS ASPM Button . . . . . . . . . . . . . . . . . . . . . . . . 16
35. RDS PTY Button. . . . . . . . . . . . . . . . . . . . . . . . . . 16
36. RDS Display Button. . . . . . . . . . . . . . . . . . . . . . . 16
CLOCK/TIMER
27
28
9
10
11
29
12
13
14
30
31
32
33
TUNING/
FOLDER
15
16
17
18
34
35
19
PTY
RDS
20
21
AUX
36
■
Display
3
5
7
9 11 13 15
1 2
4
6
8
10 12 14 16
Page
1. MP3/WMA Folder Indicator . . . . . . . . . . . . . . . . . 12
2. MP3/WMA Total Indicator . . . . . . . . . . . . . . . . . . 12
3. Memory Indicator. . . . . . . . . . . . . . . . . . . . . . 11, 14
4. CD Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5. MP3 Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
6. WMA Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
7. RDS Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
8. TA Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
9. PTYI Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
10. Extra Bass Indicator . . . . . . . . . . . . . . . . . . . . . . . 6
11. TP Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
12. Sleep Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . 20
13. Timer Play Indicator . . . . . . . . . . . . . . . . . . . . . . 20
14. Repeat Play Indicator . . . . . . . . . . . . . . . . . . . . . 10
15. FM Stereo Mode Indicator. . . . . . . . . . . . . . . . . . 15
16. FM Stereo Receiving Indicator . . . . . . . . . . . . . . 15
17. Disc Play Indicator. . . . . . . . . . . . . . . . . . . . . . . . 10
18. Disc Pause Indicator . . . . . . . . . . . . . . . . . . . . . . 10
19. USB Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
20. Random Indicator . . . . . . . . . . . . . . . . . . . . . . . . 11
17
18
19
20
Download from Www.Somanuals.co4m. All Manuals Search And Download.
System connections
Make sure to unplug the AC power lead before making any connections.
Video cable
(not supplied)
TV
AM loop aerial
To video
input socket
FM aerial
Installing the AM loop
aerial
< Assembling >
Left
speaker
Right speaker
< Attaching to the wall >
wall
screws
(not supplied)
Red
Black
Wall socket
(AC 220 - 240 V ~ 50/60 Hz)
■
Aerial connection
■
Connecting iPod to a TV
The iPod with photo and video can be viewed by
connecting to a TV/monitor.
If the TV/monitor has a video input, connect it to the VIDEO
OUT socket on the rear of the unit.
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS socket and
position the FM aerial wire in the direction where the
strongest signal can be received.
External FM aerial:
Note:
Use an external FM aerial (75 ohms coaxial cable) for
better reception. When an external FM aerial is used,
disconnect the supplied FM aerial wire.
Please make sure to set iPod unit to either NTSC or PAL
to match your TV signal. Please visit Apple’s home page
for further information.
Supplied AM loop aerial:
■
AC power connection
Connect the AM loop aerial to the AM terminal. Position
the AM loop aerial for optimum reception. Place the AM
loop aerial on a shelf, etc., or attach it to a stand or a wall
with screws (not supplied).
After checking all the connections have been made
correctly, plug the AC power lead of this unit into the wall
socket. If you plug in the unit first, the unit will enter the
stand-by mode.
Note:
Placing the aerial on the unit or near the AC power lead
may cause noise pickup. Place the aerial away from the
unit for better reception.
Note:
Unplug the AC power lead from the wall socket if the unit
will not be in use for a prolonged period of time.
■
Speaker connection
●
Connect the black wire to the minus
(–) terminal, and the red wire to the
plus (+) terminal.
●
●
Use speakers with an impedance of
6 ohms or more, as lower
impedance speakers can damage
the unit.
Do not mistake the right and the left
channels. The right speaker is the
one on the right side when you face
the unit.
Incorrect
●
●
Do not let the bare speaker wires touch each other.
Do not allow any objects to fall into or to be placed in the
bass reflex ducts.
●
Do not stand or sit on the speakers. You may be injured.
Download from Www.Somanuals.co5m. All Manuals Search And Download.
Remote control
General control
■
Battery installation
Open the battery cover.
Insert the batteries according to the direction indicated
in the battery compartment.
1
2
When inserting or removing the batteries, push them
towards the (–) battery terminals.
Close the cover.
3
CD
USB
MUTE
CLOCK/TIMER
TUNING/
FOLDER
Caution:
●
Replace all old batteries with new ones at the same
time.
PTY
RDS
●
●
Do not mix old and new batteries.
Remove the batteries if the unit will not be used for a
long period of time. This will prevent potential damage
due to battery leakage.
Do not use rechargeable batteries (nickel-cadmium
battery, etc.).
Installing the batteries incorrectly may cause the unit to
malfunction.
Batteries (battery pack or batteries installed) shall not
be exposed to excessive heat such as sunshine, fire or
the like.
■
To turn the power on
Press the ON/STAND-BY button to turn the power on.
●
●
●
After use:
Press the ON/STAND-BY button to enter the power stand-
by mode.
■
Volume auto set-in
Notes concerning use:
●
If you turn off and on the main unit with volume set to
16 or higher, the volume will start at 16.
If you turn the unit off then on again with the volume
level set to less than 15, it will turn on again at the level
set.
●
Replace the batteries if the operating distance is
reduced or if the operation becomes erratic. Purchase
●
2
“AAA” size batteries (UM/SUM-3, R6, HP-7 or
similar).
●
●
Periodically clean the transmitter on the remote control
and the sensor on the unit with a soft cloth.
Exposing the sensor on the unit to strong light may
interfere with operation. Change the lighting or the
direction of the unit if this occurs.
Keep the remote control away from moisture, heat,
shock, and vibrations.
■
Volume control
Turn the volume knob towards VOL +/– (on main unit) or
press VOLUME +/– (on remote control) to increase or
decrease the volume.
●
■
Extra bass control (X-BASS)
When the X-BASS button is pressed, the unit will enter the
extra bass mode which emphasises the bass frequencies
and “X-BASS” indicator will light up.
■
Test of the remote control
Check the remote control after checking all the
connections.
Point the remote control directly at the remote sensor on
the unit. The remote control can be used within the range
shown below:
To cancel the extra bass mode, press the X-BASS button
again.
■
Equaliser
Remote sensor
When the EQUALIZER MODE button is pressed, the
current mode setting will be displayed. To change to a
different mode, press the EQUALIZER MODE button
repeatedly until the desired sound mode appears.
No equalization.
No equalisation.
FLAT
For rock music.
For rock music.
ROCK
0.2 m - 6 m
(8" - 20')
For classical music.
CLASSIC For classical music.
For pop music.
For pop music.
POPS
VOCAL
JAZZ
Vocals are enhanced.
Vocals are enhanced.
For jazz.
For jazz.
CD
USB
MUTE
Download from Www.Somanuals.co6m. All Manuals Search And Download.
Setting the clock (Remote control
only)
Listening to the iPod
Supported iPod models:
●
●
●
iPod nano (software 1.2 above)
iPod mini (software 1.2 above)
iPod (5th generation) (software 1.3 above) (Dock
connector equipped Click Wheel model)
iPod (4th generation) (software 3.0.2 above) (Dock
connector equipped Click Wheel model)
iPod nano (2nd generation) (software 1.0.0 above)
iPod nano (3rd generation) (software 1.0.3 above)
iPod nano (4th generation) (software 1.0.3 above)
iPod classic (software 1.0.3 above)
●
CD
USB
MUTE
●
●
●
●
●
●
CLOCK/TIMER
TUNING/
FOLDER
PTY
iPod touch (software 1.1 above)
RDS
AUX
iPod touch (2nd generation) (software 2.1 above)
Caution:
Please update your iPod unit to the latest software version
from Apple’s homepage before using it.
In this example, the clock is set for the 24-hour (00:00)
display.
Notes:
●
Once the iPod is connected to the unit it will begin
charging.
1 Press the ON/STAND-BY button to turn to stand-by
mode.
●
The iPod unit cannot be charged whilst the main unit is
in USB mode.
2 Press and hold the CLOCK/TIMER button until “00:00”
appear.
■
iPod adaptor connection
The marking shows
which iPod fits
A
3 Within 10 seconds, press the
adjust the hour and then press the CLOCK/TIMER
button. Press the or button once to advance
or
button to
iPod
Adaptor
the time by
continuously.
1
hour. Hold it down to advance
iPod Description
Capacity
No.
4 Press the
or
button to adjust the minutes and
A
A
A
A
A
A
A
A
5G iPod (with video)
U2 iPod with video
iPod classic
4G iPod & U2 iPod
4G iPod
iPod photo
iPod with colour display
iPod Touch
30GB
30GB
80GB & 120GB
20GB
40GB
40GB & 60GB
60GB
then press the CLOCK/TIMER button. Press the
or
button once to advance the time by 1 minute. Hold
it down to advance continuously.
To confirm the time display:
[When the unit is in the stand-by mode]
Press the CLOCK/TIMER button. The time display will
appear for about 5 seconds.
8GB & 16GB
[When the power is on]
A
iPod Touch (2nd Gen.)
8GB, 16GB &
32GB
2GB & 4GB
2GB, 4GB & 8GB
4GB & 8GB
Press the CLOCK/TIMER button. The time display will
appear for about 5 seconds.
B
B
B
B
C
D
D
E
E
iPod nano
Note:
iPod nano (2nd Gen.)
iPod nano (3rd Gen.)
iPod nano (4th Gen.)
iPod mini
The “00:00” will appear when the AC power supply is
restored after a power failure or unplugging the unit.
Readjust the clock as follows.
8GB & 16GB
4GB & 6GB
To readjust the clock:
Perform “Setting the clock” from step 1.
iPod photo & colour U2 iPod 20GB & 30GB
iPod with colour display
5G iPod with video
iPod classic
20GB, 60GB
60GB & 80GB
160GB
Notes:
●
If you have an iPod that does not have an iPod 30 Pin
connector, you can use an audio cable to connect it to
the AUX IN socket.
●
iPhone is not supported by this system.
Download from Www.Somanuals.co7m. All Manuals Search And Download.
Listening to the iPod (continued)
■
To insert iPod adaptor
1 Press the ON/STAND-BY button to turn the power on.
2 Open the iPod cover by pulling up the tip.
pull up
CD
USB
3 Insert the iPod adaptor into the iPod dock and connect
your iPod.
MUTE
CLOCK/TIMER
iPod (bottom)
iPod
TUNING/
FOLDER
PTY
RDS
AUX
Dock connector
■
iPod playback
1 Press the ON/STAND-BY button to turn the power on.
2 Press the iPod button on the remote control or
FUNCTION button on the main unit repeatedly to
select iPod function.
3 Insert iPod unit in iPod dock of main unit.
iPod adaptor
iPod dock
4 Press the
/
button to start playback.
■
To disconnect iPod
Simply remove the iPod from the iPod dock. It is safe to do
so even during playback.
■
Navigating the iPod menus
iPod
connector
1 Press the MENU button to view the menu on iPod unit.
Press it again to go back to previous menu.
Notes:
2 Use the
or
button to select an item on the menu
●
The unit is installed with the iPod adaptor No. A.
and then press ENTER button.
●
Remove and insert the recommended iPod adaptor if
required (refer table on page 7).
Note:
When navigating the iPod menus with remote control, do
not operate any of the buttons on the iPod unit.The volume
level is adjusted by pressing the VOL (+ or –) button on the
main unit or the remote control. Adjusting the volume on
the iPod unit gives no effect.
■
To remove iPod adaptor
Insert the tip of a screwdriver (“–” type, small) into the iPod
adaptor hole as shown and lift upward to remove.
iPod operation:
The operations described below depend on the generation
iPod you are using.
System on operation:
When the main unit is powered on, the iPod unit will
automatically power on when docked in the unit (including
TIMER function).
System off (stand-by) operation:
When the main unit is turned to stand-by mode, the docked
iPod unit will automatically turn to charging mode.
Download from Www.Somanuals.co8m. All Manuals Search And Download.
Listening to the iPod (continued)
Listening to a CD or MP3/WMA disc
■
Watching videos on a TV connected to
iPod
1 Press the DISPLAY (TV OUT) button for more than 2
seconds. “TV DISP” will appear on display.
2 Select the desired video from iPod unit to be played.
3 Press the ENTER button to start playback.
Notes:
●
If the TV Out setting is already turned on at video menu,
the video is automatically displayed on the TV screen
when ENTER key is pressed.
To return to watching video on iPod screen, press the
MENU button to enter video menu. Then press the
DISPLAY (TV OUT) button for more than 2 seconds
until “iPodDISP” appears. Repeat steps 2 and 3.
During iPod video playback, pressing the DISPLAY (TV
OUT) button will not toggle video out display between
iPod and TV.
●
●
CD
USB
iPod playback detection function:
MUTE
CLOCK/TIMER
Once the play button on the iPod unit is pressed, the main
unit will automatically change to iPod function overriding
the previous function selected.
TUNING/
FOLDER
Caution:
Unplug all accessories for the iPod before inserting it into
the iPod dock.
PTY
RDS
AUX
■
Various iPod functions
Function Main
unit
Play
Remote
control
Operation
This system can play back a standard CD, CD-R/RW in the
CD format and CD-R/RW with MP3 or WMA files, but
cannot record on them. Some audio CD-R and CD-RW
discs may not be playable due to the state of the disc or the
device that was used for recording.
Press in the pause
mode.
Pause
Press in the playback
mode.
MP3:
MP3 is a form of compression. It is an acronym which
stands for MPEG Audio Layer 3. MP3 is a type of audio
code which is processed by significant compression
from the original audio source with very little loss in
sound quality.
____
Track
Press in the playback or
pause mode.
up/down
If you press the button
in the pause mode,
press the
/
button to
start the desired track.
●
This system supports MPEG 1 Layer 3 and VBR files.
During VBR file playback, time counter in the display
may differ from its actual playback time.
____
____
Fast
forward/
reverse
Press and hold down in
the playback mode.
Release the button to
resume playback.
●
●
Bitrate which is supported by MP3 is 32 ~ 320 kbps.
WMA:
Display
iPod back light ON.
WMA files are Advanced System Format files that
include audio files which are compressed with
Windows Media Audio codec. WMA is developed by
Microsoft as an audio format file for Windows Media
Player.
Press for more than 2
seconds to toggle the
video out display
between iPod or TV.
____
____
____
Repeat
Shuffle
Press to toggle repeat
mode.
●
“MP3” and “WMA” indicator will light up after the unit
reads information on an MP3 or WMA disc.
Press and hold down to
toggle shuffle mode.
●
Bitrate which is supported by WMA is 64 ~ 160 kbps.
Auto power off function:
In the stop mode of CD, MP3 or WMA operation, the main
unit enters the stand-by mode after 15 minutes of inactivity.
iPod
Menu
Press to view the iPod
menu during iPod
function.
____
iPod
Enter
Press to confirm the
selection.
____
iPod
Press to select the iPod
menu.
Cursor
Up/
Down
Download from Www.Somanuals.co9m. All Manuals Search And Download.
Listening to a CD or MP3/WMA disc
(continued)
Advanced CD or MP3/WMA disc
playback
■
Disc playback
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button on the remote control or
FUNCTION button on the main unit repeatedly to select
CD function.
CD
USB
MUTE
CLOCK/TIMER
3 Press the OPEN/CLOSE button to open the disc tray.
4 Place the disc on the disc tray, label side up.
TUNING/
FOLDER
PTY
RDS
AUX
■
Direct track search
By using the Direct Search buttons, the desired tracks on
the current disc can be played.
5 Press the OPEN/CLOSE button to close the disc tray.
Use the Direct Search buttons on the remote control to
select the desired track whilst playing the selected
disc.
6 Press the
/
button to start playback. After the last
track is played, the unit will stop automatically.
●
The Direct Search buttons allow you to select up to
Caution:
number 9.
●
●
Do not place two discs in one disc tray.
Do not play discs of special shapes (heart, octagon,
etc). It may cause malfunctions.
Do not push the disc tray whilst it is moving.
If the power fails whilst the tray is open, wait until the
power is restored.
●
When selecting number 10 or higher, use the “10+”
button.
●
●
A. For example, to choose 13
1 Press the “10+” button once.
2 Press the “1” button.
●
●
●
If TV or radio interference occurs during CD operation,
move the unit away from the TV or radio.
Be sure to place 8 cm (3") disc in the middle of the disc
tray.
Due to the structure of the disc information, it takes
longer to read an MP3/WMA disc than a normal CD
(approximately 20 to 90 seconds).
3 Press the “3” button.
Selected track number
B. For example, to choose 130
1 Press the “10+” button twice.
2 Press the “1” button.
3 Press the “3” button.
4 Press the “0” button.
Notes:
Notes for CD or MP3/WMA disc:
●
When the end of the last track is reached during fast
forward, the CD operation will be stopped. When the
beginning of the first track is reached during fast
reverse, the unit will enter the playback mode.
Rewritable multi-session discs with unfinished writing,
can still be played.
●
●
A track number higher than the number of tracks on the
disc cannot be selected.
●
During random play, direct search is not possible.
■
Various disc functions
To stop playback:
Press and hold
button.
/
button on main unit or press CD
Function
Main
unit
Remote
control
Operation
Play
Press in the stop mode.
■
Repeat play
Repeat play can play one track, all tracks or a programmed
sequence continuously.
To repeat one track:
Stop
Press in the playback
mode. Press and hold
the
playback.
Press in the playback
Press the PLAY MODE button repeatedly until “RPT ONE”
/
button to stop
appears. Press the
/
button.
To repeat all tracks:
Pause
mode. Press the
button to resume
playback from the
paused point.
/
Press the PLAY MODE button repeatedly until “RPT ALL”
appears. Press the button.
/
To repeat all desired tracks:
Perform steps 1 - 6 in “Programmed play” section on page
11 and then press the PLAY MODE button until “RPT ALL”
appears.
Track up/
down
Press in the playback or
stop mode.
____
____
If you press the button
in the stop mode, press
To cancel repeat play:
Press the PLAY MODE button again until
disappears.
“
”
the
/
button to start
the desired track.
Fast
forward/
reverse
Press and hold down in
the playback mode.
Release the button to
resume playback.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced CD or MP3/WMA disc playback (continued)
5 Press the
/
button to start playback.
■
Random play
6 Press the CD button.The total number in memory will
appear.
The tracks on the disc can be played in random order
automatically.
To random play all tracks:
Press and hold down PLAY MODE button on the remote
control until “RANDOM” icon light up. Press the
button.
/
To cancel the programmed play mode:
To cancel random play:
Press and hold the PLAY MODE button. “RANDOM” icon
will disappear.
Whilst in the stop mode and the “MEMORY” indicator is lit,
press the
button on the remote control twice. The
“MEMORY” indicator will disappear and all the
programmed contents will be cleared.
Adding tracks to the programme:
If
a
programme has been previously stored, the
“MEMORY” indicator will be displayed. Press the
MEMORY button repeatedly until last track appears. Then
follow steps 2 - 4 to add tracks. The new tracks will be
stored after the last track of the previous programme.
Notes:
●
●
●
During random playback, repeat function is not
possible.
Playback will stop after all the tracks is played
randomly.
To check which tracks are programmed:
Whilst the unit is stopped in the programmed play mode,
press the MEMORY button repeatedly.
If you press the
move to the track selected next by the random opera-
tion. On the other hand, the button does not allow
button during random play, you can
To clear the programmed selections:
During stop mode, press the MEMORY button repeatedly
to select the unwanted track. Press the CLEAR button to
delete it.
you to move to the previous track.
●
The beginning of the track being played will be located.
In random play, the unit will select and play tracks
automatically. (You cannot select the order of the
tracks.)
Notes:
●
When a disc is ejected, the programme is automatically
cancelled.
■
Programmed play
●
If you press the ON/STAND-BY button to enter the
stand-by mode or change the function from CD to
another, the programmed selections will be cleared.
You can choose up to 32 selections for playback in the
order you like.
●
During the programme operation, random play is not
possible.
1 Whilst in the stop mode, press the MEMORY button on
the remote control to enter the programming save
mode.
2 Press the
or
buttons on the remote control to
select the desired track.
Selected track number
3 Press the MEMORY button to save the track number.
4 Repeat steps 2 - 3 for other tracks. Up to 32 tracks can
be programmed. If you make a mistake, press the
MEMORY button repeatedly to select the wrong track
then press the CLEAR button.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3/WMA folder mode (only for MP3/WMA files)
To play back MP3/WMA (Windows Media Audio) file
There are many music sites on the internet that you can
download MP3/WMA (Windows Media Audio) music files.
Follow the instructions from the website on how to
download the music files. You can then play back these
downloaded music files by burning them to a CD-R/RW
disc.
CD
USB
MUTE
CLOCK/TIMER
TUNING/
FOLDER
●
Your downloaded song/files are for personal use only.
Any other usage of the song without owner’s
permission, is against the law.
TUNING/
FOLDER
PTY
RDS
■
About folder playback order
If MP3/WMA files are recorded in several folders, a folder
number will be set to each folder automatically.
■
Procedure to playback MP3/WMA disc
To play back CD-R/RW.
These folders can be selected by the FOLDER ( or
)
button on the remote control. If there is no supported file
formats inside the selected folder, the folder is skipped and
the next folder will be selected.
1 Press the CD button, and load an MP3/WMA disc. After
disc is loaded, disc info will be displayed.
TOTAL
indicator
Example: How to set folder number if MP3/WMA format
files are recorded as below figure.
1
2
ROOT folder is set as folder 1.
As for folders inside ROOT folder (Folder A and Folder
B), the folder which is recorded earlier on the disc will
be set as folder 2 and folder 3.
Total number of files
2 Press the FOLDER ( or ) button, to select desired
playback folder. (Folder mode on)
3
As for folder inside Folder A (Folder C and Folder D),
the folder which is recorded earlier on the disc will be
set as folder 4 and folder 5.
4
Folder E that is inside Folder D will be set as folder 6.
●
The folder and file order information which is recorded
on the disc depends on the writing software. There
maybe possibilities that this unit will playback the files
not according to our expected playback order.
For CD MP3/WMA, 255 numbers of folders and files
inclusive of the folders which have non playable files
can be read.
FOLDER number
Total files in Folder 3
3 Select desired file to be played back by pressing the
or button.
●
4 Press the
/
(CD / ) button. Playback will start.
●
●
File name, Title, Artist and Album name are
displayed if they are recorded on the disc.
Press the FOLDER ( or ) button, and the folder
can be selected even though it is in playback mode.
It will continue playback mode in the 1st track of the
selected folder.
FILE 3
FILE 4
FILE 5
ROOT
(FOLDER 1)
FOLDER A
(FOLDER 2)
FOLDER C
(FOLDER 4)
FOLDER D
(FOLDER 5)
FILE 6
FILE 7
●
Display content can be changed by pressing the CD
DISPLAY button.
FILE 8
FOLDER E
(FOLDER 6)
File name display
Counter display
Title display
Artist display
FILE 9
FILE 10
FOLDER B
(FOLDER 3)
FILE 1
FILE 2
Album display
Note:
If the track is skipped during playback, it means “Copyright
protected WMA file” or “Not supported playback file” is
selected.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to USB mass storage device/MP3 player
■
To play back USB/MP3 player with folder
mode on
1 Press the USB button on the remote control or
FUNCTION button repeatedly on main unit to select
USB function. Connect the USB memory device that
has MP3/WMA format files on the unit. When the USB
memory is connected to the main unit, the track
information will be displayed.
2 Press the FOLDER ( or ) button to select desired
playback folder. To start playback, go to step 4. To
change the playback folder, press the FOLDER ( or
) button to select another folder.
CD
USB
MUTE
3 Select desired file to be played back by pressing the
CLOCK/TTIMER
or
button.
TUNING/
FOLDER
TUNING/
FOLDER
4 Press the
/
(USB / ) button. Playback will start.
USB
●
●
Title, Artist and Album name are displayed if they are
recorded in the USB memory device.
Display content can be changed by pressing the
DISPLAY button.
PTY
RDS
AUX
Note:
This USB mass storage device or MP3 player is not
compatible with MTP and AAC file systems.
■
To remove USB memory device
1 Press the (USB ) button to stop playback.
■
To play back USB/MP3 player with folder
mode off
2 Disconnect USB memory device from the USB terminal.
1 Press the USB button on the remote control or
FUNCTION button on main unit repeatedly to select
USB function. Connect the USB memory device that
has MP3/WMA format files on the unit. When the USB
memory is connected to the main unit, the device
information will be displayed.
3 Close the terminal door.
Notes:
●
SHARP will not be held liable for the loss of data whilst
the USB memory device is connected to the audio
system.
●
Files compressed in MP3 and/or WMA format can be
played back when connected to the USB terminal.
This USB memory’s format supports FAT 16 or FAT 32.
SHARP cannot guarantee that all USB memory
devices will work on this audio system.
2 Select desired file to be played back by pressing the
or
button.
●
●
3 Press the
/
(USB / ) button. Playback will start.
●
●
Title, Artist and Album name are displayed if they are
recorded in the USB memory device.
Display content can be changed by pressing the
DISPLAY button.
●
USB cable is not recommended for use in this audio
system to connect to USB memory device. Use of the
USB cable will affect the performance of this audio
system.
This USB memory cannot be operated via USB hub.
The USB terminal in this unit is not intended for a PC
connection but is used for music streaming with a USB
memory device.
External HDD-storage cannot be played back via USB
terminal.
If the data inside the USB memory is large, it may take
longer time for the data to be read.
Note:
●
●
To pause playback:
Press the (USB / ) button.
/
Auto power off function:
In the stop mode of USB operation, the main unit enters
the stand-by mode after 15 minutes of inactivity.
●
●
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to USB mass storage
device/MP3 player (continued)
Advanced USB playback (continued)
■
Random play
Notes:
The tracks can be played in random order automatically.
●
This product can play WMA and MP3 files. It will
automatically detect the file type being played. If
unplayable file is played on this product, the file will be
automatically skipped. This will take a few seconds. If
abnormal indications appear on the display due to the
unspecified file, turn off the unit and then turn it on
again.
To random play all tracks:
Press and hold down PLAY MODE button on the remote
control. Press the
/
(USB / ) button.
To cancel random play:
Press and hold the PLAY MODE button. “RANDOM” will
disappear.
●
●
This product relates to USB mass storage devices and
MP3 players. It may however face some irregularities
due to various unforeseen reasons from some devices.
Should this happen, turn off the unit and then turn it on
again.
Notes on random play:
●
During random playback, repeat function is not
possible.
The USB port is only intended for direct connection to
a USB memory device without any cable.
●
Playback will stop after all the tracks is played
randomly.
● If you press the
move to the track selected next by the random
operation. However, the button does not allow you
button during random play, you can
Advanced USB playback
to move to the previous track. It will go to the beginning
of the current track instead.
In random play, the unit will select and play tracks
automatically. (You cannot select the order of the
tracks.)
■
Repeat play
●
Repeat play can play all tracks sequence continuously.
To repeat one track:
Press the PLAY MODE button repeatedly until “RPT ONE”
appears. Press the
/
(USB / ) button.
Notes:
To repeat all tracks:
●
●
●
●
●
This unit only supports “MPEG-1 Audio Layer-3”
Press the PLAY MODE button repeatedly until “RPT ALL”
appears. Press the (USB / ) button.
format. (Sampling Frequency is 32, 44.1, 48kHz)
“MPEG-2 Audio Layer-3”, “MPEG-2.5 Audio Layer-3”
and MP1, MP2 format are not supported.
Playback order for MP3 files may differ depending on
the writing software used during file download.
Bitrate which is supported by MP3 is 32~320 kbps,
WMA is 64~160 kbps.
For MP3/WMA files, please put “.MP3” “.WMA”
extension. Files cannot be played back if there is no
MP3/WMA extension.
/
To cancel repeat play:
Press the PLAY MODE button repeatedly until “NORMAL”
appears and “ ” disappear.
■
Programmed play (Folder mode)
You can choose up to 32 selections for playback in the
order you like.
1
Whilst in the stop mode, press the MEMORY button on
the remote control to enter the programming save
mode.
●
●
Playlists are not supported on this unit.
This unit can display Folder Name or File Name up to
32 characters.
●
Maximum total number of MP3/WMA files is 65280.
Maximum total number of folders is 255 inclusive of
root directory.
2
Press the FOLDER ( or ) to select desired folder
then press the
track.
●
●
Folders with non playable files are also counted.
The display playback time may not be displayed
correctly when playing back a variable bitrate file.
The ID3TAG information supported are TITLE, ARTIST
and ALBUM only. Title name, artist name and album
name can be displayed by pressing the DISPLAY
button during file playback or pause mode.
WMA meta tag also supports title, artist and album
name which are recorded in WMA files. Copyright
protected WMA files cannot be played back.
or
buttons to select the desired
●
Selected track number
3
Press the MEMORY button to save the track number.
●
4
5
Repeat steps 2 - 3 for other tracks. Up to 32 tracks can
be programmed.
During programmed playback, press and hold
/
button on main unit or press the CD button to stop
programmed playback.The total number in memory will
appear.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the radio
■
Memorising a station
You can store 40 AM and FM stations in memory and recall
them at the push of a button. (Preset tuning)
1 Perform steps 1 - 3 in “Tuning”.
2 Press the MEMORY button.
3 Within 5 seconds, press the
or
button to select
the preset channel number. Store the stations in
memory, in order, starting with preset channel 1.
CD
4 Press the MEMORY button to store that station in
memory. If the “MEMORY” and preset number
indicators disappear before the station is memorised,
repeat the operation from step 2.
USB
MUTE
CLOCK/TIMER
TUNING/
FOLDER
5 Repeat steps 1 - 4 to set other stations, or to change a
preset station. When a new station is stored in the
memory, the station previously memorised for that
preset channel number will be erased.
PTY
RDS
AUX
Note:
The backup function protects the memorised stations for a
few hours should there be a power failure or the AC power
lead become disconnected.
■
Tuning
1 Press the ON/STAND-BY button to turn the power on.
■
To recall a memorised station
2 Press the TUNER (BAND) button repeatedly to select
the desired frequency band (FM or AM).
Press the PRESET ( or ) button for less than 0.5
seconds to select the desired station.
3 Press the TUNING ( or
) button on the remote
control to tune in to the desired station.
■
To scan the preset stations
●
●
Manual tuning:
Press the TUNING ( or ) button repeatedly to
tune in to the desired station.
The stations saved in the memory can be scanned
automatically. (Preset memory scan)
1 Press the PRESET ( or ) button for more than 0.5
seconds. The preset number will flash and the
programmed stations will be tuned in sequentially, for 5
seconds each.
Auto tuning:
When the TUNING ( or ) button is pressed for
more than 0.5 seconds, scanning will start
automatically and the tuner will stop at the first
receivable broadcast station.
2 Press the PRESET ( or ) button again when the
desired station is located.
Notes:
●
When radio interference occurs, auto scan tuning may
stop automatically at that point.
Auto scan tuning will skip weak signal stations.
■
To erase entire preset memory
●
1 Press and hold the CLEAR button until “CLR MEM”
appears.
To receive an FM stereo transmission:
●
Press the TUNER (BAND) button to select stereo mode
and “ST” indicator will be displayed. “
when an FM broadcast is in stereo.
” will appear
●
If the FM reception is weak, press the TUNER (BAND)
button to extinguish the “ST” indicator. The reception
changes to monaural, and the sound becomes clearer.
Note:
This product can receive FM stereo/FM monaural and AM
monaural broadcasts. AM stereo broadcasts will not be
played in stereo.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Radio Data System (RDS)
RDS is
a
broadcasting service which
a
growing
■
Using the Auto Station Programme
Memory (ASPM)
number of FM stations provide. These FM stations
send additional signals along with their regular
programme signals. They send their station names,
and information about the type of programme such as
sport, music, etc.
When tuned to an RDS station, “RDS” and the station
name will be displayed.
“TP” (Traffic Programme) will appear on the display when
the received broadcast carries traffic information, and “TA”
(Traffic Announcement) will appear whilst
information is on air.
Whilst in the ASPM operation mode, the tuner will
automatically search for new RDS stations. Up to 40
stations can be stored.
If you have already stored some stations in memory, the
number of new stations you can store will be less.
1 Press the TUNER button on the remote control or
FUNCTION button repeatedly on the main unit to
select TUNER function.
a
traffic
“PTYI” (Dynamic PTY Indicator) will appear whilst the
Dynamic PTY station is received.
2 Press and hold down the RDS ASPM button on the
remote control for at least 3 seconds.
1
After “ASPM” has flashed for about 4 seconds,
scanning will start (87.50 - 108.00 MHz).
2
When an RDS station is found, “RDS” will appear
for a short time and the station will be stored in
memory.
You can control the RDS by using the buttons on the
remote control only.
■
Information provided by RDS
Each time the RDS DISPLAY button is pressed, the
display will switch as follows:
3
After scanning, the number of stations stored in
memory will be displayed for 4 seconds, and then
“END” will appear for 4 seconds.
CD
USB
MUTE
To stop the ASPM operation before it is complete:
Press the RDS ASPM button whilst it is scanning for
stations. The stations which are already stored in memory
will be kept there.
CLOCK/TIMER
TUNING/
FOLDER
Notes:
PTY
RDS
AUX
●
If the same station is broadcasting on different
frequencies, the strongest frequency will be stored in
memory.
●
●
Any station which has the same frequency as the one
stored in memory will not be stored.
If 40 stations have already been stored in memory, the
scan will be aborted. If you want to redo the ASPM
operation, erase the preset memory.
Programme type (PTY)
Radio text (RT)
Station name (PS)
Frequency
●
●
●
●
If no station have been stored in memory, “00 MEM”
and “END” will appear for about 4 seconds.
If the RDS signals are very weak, station names may
not be stored in memory.
The same station name can be stored in different
channels.
When tuning in to a station other than an RDS station or
to an RDS station which sends weak signal, the display
will change in the following order:
In a certain area or during certain time periods, the
station names may temporarily be different.
NO PS
NO PTY
NO RT
FM 98.80 MHz
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Radio Data System (RDS) (continued)
■
Notes for RDS operation
■
To recall stations in memory
To specify programmed types and select stations
(PTY search):
You can search a station by specifying the programme
type (news, sports, traffic programme, etc. ... see page 18)
from the stations in memory.
If any of the following events occur, it does not mean
that the unit is faulty:
●
“PS”, “NO PS” and a station name appear alternately,
and the unit does not operate properly.
●
If a particular station is not broadcasting properly or a
station is conducting tests, the RDS reception function
may not work properly.
1 Press the TUNER (BAND) button on the remote control
or FUNCTION button on the main unit repeatly to
select TUNER function.
●
●
When you receive an RDS station whose signal is too
weak, information like the station name may not be
displayed.
“NO PS”, “NO PTY” or “NO RT” will flash for about 5
seconds, and then the frequency will be displayed.
2 Press the RDS PTY button on the remote control.
Notes for radio text:
●
The first 8 characters of the radio text will appear for 4
seconds and then they will scroll across the display.
If you tune in to an RDS station which is not
broadcasting any radio text, “NO RT” will be displayed
when you switch to the radio text position.
Selected PTY code (blinking) will appear for about 6
seconds.
●
3 Within 6 seconds, press the
the PTY code.
or
button to select
●
Whilst radio text data is received or when the text
contents change, “RT” will be displayed.
Each time the button is pressed, the PTY code will
appear.
4 Whilst the selected PTY code is displayed (within 6
seconds), press the RDS PTY button again.
●
●
The unit searches the all preset stations and stops
when it finds a station of the selected category then
tunes into the stations. The RDS indicator lights up.
If no programme is found in the all preset stations,
“NONE” appear on the display and returns to the
previous station.
Notes:
●
If the display has stopped flashing, start again from
step 2. If the unit finds a desired programme type, the
corresponding channel number will lit for about 4
seconds, and then the station name will remain it.
If you want to listen to the same programme type of
another station, press the RDS PTY button and start
again from step 2. The unit will look for the next station.
●
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Radio Data System (RDS) (continued)
Descriptions of the PTY (Programme Type) codes, TP
CHILDREN For programmes targeted at a young
(Traffic Programme) and TA (Traffic Announcement)
You can search for and receive the following PTY, TP and
TA signals.
audience, primarily for entertainment and
interest, rather than where the objective is
to educate.
NEWS
Short accounts of facts, events and
publicly expressed views, reportage and
actuality.
SOCIAL
Programmes about people and things that
influence them individually or in groups.
Includes: sociology, history, geography,
psychology and society.
AFFAIRS
Topical programme expanding or
enlarging upon the news, generally in
different presentation style or concept,
including debate, or analysis.
RELIGION
PHONE IN
TRAVEL
Any aspect of beliefs and faiths, involving
a God or Gods, the nature of existence
and ethics.
INFO
Programmes whose purpose is to impart
advice in the widest sense.
Involving members of the public
expressing their views either by phone or
at a public forum.
SPORT
EDUCATE
Programme concerned with any aspect of
sport.
Features and programmes concerned
with travel to near and far destinations,
package tours and travel ideas and
opportunities. Not for use for
announcements about problems, delays,
or roadworks affecting immediate travel
where TP/TA should be used.
Programme intended primarily to
educate, of which the formal element is
fundamental.
DRAMA
All radio plays and serials.
CULTURE
Programmes concerned with any aspect
of national or regional culture, including
language, theatre, etc.
LEISURE
Programmes concerned with recreational
activities in which the listener might
participate. Examples include,
Gardening, Fishing, Antique collecting,
Cooking, Food & Wine, etc.
SCIENCE
VARIED
Programmes about the natural sciences
and technology.
Used for mainly speech-based
programmes usually of light-
entertainment nature, not covered by
other categories. Examples include:
quizzes, panel games, personality
interviews.
JAZZ
Polyphonic, syncopated music
characterised by improvisation.
COUNTRY
Songs which originate from, or continue
the musical tradition of the American
Southern States. Characterised by a
straightforward melody and narrative
story line.
POP M
Commercial music, which would generally
be considered to be of current popular
appeal, often featuring in current or recent
record sales charts.
NATION M
Current Popular Music of the Nation or
Region in that country's language, as
opposed to International “Pop” which is
usually US or UK inspired and in English.
ROCK M
EASY M
Contemporary modern music, usually
written and performed by young
musicians.
OLDIES
FOLK M
Music from the so-called “golden age” of
popular music.
Current contemporary music considered
to be “easy-listening”, as opposed to Pop,
Rock or Classical, or one of the
specialised music styles, Jazz, Folk or
Country. Music in this category is often
but not always, vocal, and usually of short
duration.
Music which has its roots in the musical
culture of a particular nation, usually
played on acoustic instruments. The
narrative or story may be based on
historical events or people.
DOCUMENT Programme concerned with factual
matters, presented in an investigative
style.
LIGHT M
Classical music for general, rather than
specialist appreciation. Examples of
music in this category are instrumental
music, and vocal or choral works.
TEST
Broadcast when testing emergency
broadcast equipment or receivers.
CLASSICS
OTHER M
Performances of major orchestral works,
symphonies, chamber music, etc., and
including Grand Opera.
ALARM !
Emergency announcement made under
exceptional circumstances to give
warning of events causing danger of a
general nature.
Musical styles not fitting into any of the
other categories. Particularly used for
specialist music of which Rhythm & Blues
and Reggae are examples.
NONE
No programme type (receive only).
WEATHER
FINANCE
Weather reports and forecasts and
meteorological information.
Stock Market reports, commerce, trading,
etc.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer and sleep operation (Remote control only)
■
Timer playback
Before setting timer:
1
Check that the clock is set to the correct time (refer to
page 7).
CD
USB
MUTE
If it is not set, you cannot use the timer function.
CLOCK/TIMER
2
For timer playback, load the disc to be played back.
TUNING/
FOLDER
PTY
1
2
Press the ON/STAND-BY button to turn the power on.
Press the CLOCK/TIMER button for about 2 seconds.
RDS
AUX
Timer playback:
The unit turns on and plays the desired source (CD,
TUNER, USB, iPod) at a preset time.
3
4
Within 10 seconds, press the CLOCK/TIMER button.
Press the
or
button to set hour then press the
CLOCK/TIMER button.
5
6
7
Press the
press the CLOCK/TIMER button.
or
button to set minute and then
Switch input with the
OFF” and then press the CLOCK/TIMER button.
or
button to select “TMR-
Press the
the CLOCK/TIMER button.
or
button to set hour and then press
8
9
Press the
press the CLOCK/TIMER button.
or
button to set minute and then
To select the timer playback source, switch input with
or
button to select “SOURCE”, then press the
CLOCK/TIMER button.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer and sleep operation (Remote control only) (continued)
10 Press the
or
button to select wake up source
■
Sleep operation
(CD, USB, Tuner, iPod) then press the CLOCK/
TIMER button to confirm.
The radio, compact disc and USB can all be turned off
automatically.
1 Play back the desired sound source.
2 Press the SLEEP button.
11 If “TUNER” is selected, press the CLOCK/TIMER
3 Within 10 seconds, press the SLEEP button repeatedly
to select the time.
button to enter the preset selection mode.
10
20
30
...
80
90
4 “SLEEP” will appear.
5 The unit will enter the power stand-by mode
automatically after the preset time has elapsed.
To confirm the remaining sleep time:
12 To select a preset channel number, press the
or
1 Whilst “SLEEP” is indicated, press the SLEEP button.
The remaining time is displayed for about 10 seconds.
button and then press the CLOCK/TIMER button.
To cancel the sleep operation:
Press the ON/STAND-BY button whilst “SLEEP” is
indicated.To cancel the sleep operation without setting the
unit to the stand-by mode, proceed as follows.
13 The “ ” indicator lights up and the unit is ready for
1 Whilst “SLEEP” is indicated, press the SLEEP button.
timer playback.
2 Within 10 seconds, press the SLEEP button repeatedly
to select “SLEEP 00”.
14 Press the ON/STAND-BY button to enter the power
stand-by mode. Press the CLOCK/TIMER button to
confirm the timer setting.
15 When the preset time is reached, playback will start.
■
To use timer and sleep operation together
“
” indicator will blink to show timer playback. The
volume will increase gradually until it reaches the last
volume level.
Sleep and timer playback:
For example, you can fall asleep listening to the radio and
wake up to CD in the next morning.
16 When the timer end time is reached, the system will
enter the power stand-by mode automatically.
1 Set the sleep time (see above, steps 1 - 5).
2 Whilst the sleep timer is set, set the timer playback
(steps 2 - 10, pages 19 - 20).
Checking the timer setting:
1
Press the CLOCK/TIMER button repeatedly to view as
follow:
Sleep timer setting Timer playback setting
End time
10 - 90 minutes
Desired time
Timer playback
start time
Sleep operation will
automatically stop
Cancelling the timer setting:
Press the SLEEP button for 2 seconds. The “ ” indicator
disappear and the display show “TMR-OFF”.
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To
reuse the same setting, press the SLEEP button for 2
seconds.
The “ ” indicator light up and the display show “TMR-ON”.
Notes:
●
After selecting the playback source, when press the
CLOCK/TIMER button to confirm, “SOURCE” will
appear and blink for 2 seconds, then change to last
function.
●
●
When the preset time is reached, playback will start at
current setting if no selected playback source is made.
The volume cannot be preset during timer setting.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Enhancing your system
Troubleshooting chart
Many potential problems can be resolved by the owner
without calling a service technician.
If something is wrong with this product, check the following
before calling your authorised SHARP dealer or service
centre.
The connection lead is not included. Purchase
commercially available lead as shown below.
a
■
General
Symptom
Possible cause
●
●
The clock is not set
to the correct time.
●
Did a power failure occur?
Reset the clock. (Refer
page 7)
When a button is
pressed, the unit
does not respond.
●
●
Set the unit to the power
stand-by mode and then
turn it back on.
If the unit still malfunctions,
reset it. (Refer page 22)
●
No sound is heard.
●
●
●
Is the volume level set to
“0”?
Are the headphones
connected?
Are the speaker wires
disconnected?
■
Listening to the playback sounds of
portable audio player, etc.
■
CD player
Symptom
1 Use a connection lead to connect the portable audio
player etc. to the AUX IN socket. When using video
equipment, connect the audio output to this unit and the
video output to a television.
Possible cause
●
●
Playback does not
start.
●
●
●
Is the disc loaded upside
down?
Playback stops in
the middle or is not
performed properly.
Does the disc satisfy the
standards?
2 Press the ON/STAND-BY button to turn the power on.
Is the disc distorted or
scratched?
3 Press the AUX IN button on the remote control or
FUNCTION button repeatedly on main unit to select
AUX IN function.
●
Playbacksoundsare
skipped, or stopped
in the middle of a
track.
●
Is the unit located near
excessive vibrations?
Is the disc very dirty?
Has condensation formed
inside the unit?
●
●
4 Play the connected equipment. If volume level of the
connected device is too high, sound distortion may
occur. Should this happen, lower the volume of the
connected device. If volume level is too low, increase
the volume of the connected device.
■
Remote control
Symptom
Note:
Possible cause
To prevent noise interference, place the unit away from the
television.
●
The remote control
does not operate.
●
●
Is the AC power lead of the
unit plugged in?
Is the battery polarity
correct?
■
Headphones
●
Do not turn the volume on to full at switch on and listen
to music at moderate levels. Excessive sound pressure
from earphones and headphones can cause hearing
loss.
●
●
Are the batteries dead?
Is the distance or angle
incorrect?
●
Does the remote control
sensor receive strong
light?
●
●
Before plugging in or unplugging the headphones,
reduce the volume.
Be sure your headphones have a 3.5 mm (1/8")
diameter plug and impedance between 16 and 50
ohms. The recommended impedance is 32 ohms.
■
Tuner
●
Plugging in the headphones disconnects the speakers
automatically. Adjust the volume using the VOLUME
control.
Symptom
Possible cause
●
The radio makes
unusual noises
continuously.
●
●
Is the unit placed near the
TV or computer?
Is the FM aerial or AM loop
aerial placed properly?
Move the aerial away from
the AC power lead if it is
located nearby.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting chart (continued)
■
USB
■
Factory reset, clearing all memory
1 Press the ON/STAND-BY button to enter the power
Symptom
Possible cause
stand-by mode.
●
Device cannot be
detected.
●
●
Is there any MP3/WMA file
available?
Is the device properly
connected?
Is it an MTP device?
Does the device contain AAC
file only?
2 Whilst pressing down the OPEN/CLOSE button, press
the ON/STAND-BY button until “RESET” appears.
●
●
●
Playback does not
start.
●
Is it a copyright protected
WMA file?
●
●
Is it a false MP3 file?
●
●
Wrong time
display.
Wrong file name
display.
Is Variable Bitrate file being
played back?
Is the File Name written in
Chinese or Japanese
characters?
●
Caution:
This operation will erase all data stored in memory
including clock, timer settings, tuner preset, and CD
programme.
●
Recording cannot
start.
●
Is the USB device in write
protect mode?
Is it a CD-WMA disc?
Is the device’s memory
already full?
●
●
■
Before transporting the unit
Remove all CDs from the unit. Make sure there is no CD in
the disc tray. Then, set the unit to the power stand-by
mode. Carrying the unit with discs left inside can damage
the unit.
■
iPod
Symptom
Possible cause
■
Care of compact discs
●
No sound is
produced.
Noimageappears
on the TV/monitor.
●
●
The iPod is not playing.
The iPod is not properly
connected to the unit.
Is the AC power lead of the
unit plugged in?
The video cable is not
properly connected.
The TV/monitor’s input
selection is not properly set.
Compact discs are fairly resistant to damage, however
mistracking can occur due to an accumulation of dirt on the
disc surface. Follow the guidelines below for maximum
enjoyment from your CD collection and player.
●
●
●
●
Do not write on either side of the disc, particularly the
non-label side from which signals are read. Do not
mark this surface.
●
iPod will not
charge.
●
●
Wrong iPod adaptor is used.
The iPod is not making full
contact with the iPod
connector.
●
●
Keep your discs away from direct sunlight, heat, and
excessive moisture.
Always hold the CDs by the edges. Fingerprints, dirt, or
water on the CDs can cause noise or mistracking. If a
CD is dirty or does not play properly, clean it with a soft,
dry cloth, wiping straight out from the centre, along the
radius.
●
●
The main unit is in stand-by
mode.
Using 3rd generation iPod.
■
Condensation
NO
YES
Correct
Sudden temperature changes, storage or operation in an
extremely humid environment may cause condensation
inside the cabinet (CD pickup, etc.) or on the transmitter on
the remote control. Condensation can cause the unit to
malfunction. If this happens, leave the power on with no
disc in the unit until normal playback is possible (about 1
hour). Wipe off any condensation on the transmitter with a
soft cloth before operating the unit.
Maintenance
■
If problem occurs
When this product is subjected to strong external
interference (mechanical shock, excessive static
electricity, abnormal supply voltage due to lightning, etc.)
or if it is operated incorrectly, it may malfunction.
■
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted
soap solution, then with a dry cloth.
If such a problem occurs, do the following:
1 Set the unit to the stand-by mode and turn the power on
again.
2 If the unit is not restored in the previous operation,
unplug and plug in the unit again, and then turn the
power on.
Caution:
●
Do not use chemicals for cleaning (petrol, paint thinner,
etc.). It may damage the cabinet.
●
Do not apply oil to the inside of the unit. It may cause
malfunctions.
Note:
If neither operation above restores the unit, clear all the
memory by resetting it.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification
changes for product improvement without prior notice.The
performance specification figures indicated are nominal
values of production units. There may be some deviations
from these values in individual units.
■
USB
USB host
interface
●
●
Complies with USB 1.1 (Full
Speed)/ 2.0 Mass Storage Class.
Support Bulk only and CBI
protocol.
■
General
Support file
Bitrate support
Other
●
●
MPEG 1 Layer 3
WMA (Non DRM)
Power source AC 220 - 240 V ~ 50/60 Hz
Power Power on: 25 W
consumption Power stand-by: 0.6 W (*)
●
●
MP3 (32 ~ 320 kbps)
WMA (64 ~ 160 kbps)
●
●
Maximum total number of MP3/
WMA files is 65280.
XL-DH10NH
Maximum total number of folders
is 255 INCLUSIVE of root
directory.
Power
Power on: 45 W
consumption Power stand-by: 0.6 W (*)
XL-DH20NH
●
The ID3TAG information
supported are TITLE, ARTIST and
ALBUM only.
Dimensions
Width: 155 mm (6-3/32")
Height: 178 mm (7-1/64")
Depth: 243 mm (9-9/16")
●
●
Supports ID3TAG version 1 and
version 2.
Weight
XL-DH10NH
2.12 kg (4.67 lbs.)
File system
support
Support USB devices with
Microsoft Windows/DOS/FAT 12/
FAT 16/ FAT 32.
Weight
XL-DH20NH
2.12 kg (4.67 lbs.)
●
2 kbyte block length for sector.
( * ) This power consumption value is obtained when the
main unit is in stand-by mode without iPod charging.
■
Tuner
Frequency range FM: 87.5 - 108 MHz
■
Amplifier
AM: 522 - 1,620 kHz
Output power MPO: 24 W (12 W + 12 W) (10% T.H.D.)
XL-DH10NH RMS: 24 W (12 W + 12 W) (10% T.H.D.)
■
Speaker (CP-DH10NH)
Output power MPO: 50 W (25 W + 25 W) (10% T.H.D.)
Type
1-way type speaker system
10 cm (4") Full range
XL-DH20NH
RMS: 50 W (25 W + 25 W) (10% T.H.D.)
Output
Speakers: 6 ohms
Maximum input
power
24 W
terminals
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Rated input power 12 W
Input terminals AUX IN (Analogue input):
Impedance
Dimensions
6 ohms
500 mV/47 k ohms
Width: 147 mm (5-51/64")
Height: 174 mm (6-13/16")
Depth: 171.5 mm (6-49/64")
■
CD player
Weight
1.53 kg (3.37 lbs.)/each
Type
Single disc multi-play compact disc
player
■
Speaker (CP-DH20NH)
Signal
Non-contact, 3-beam
semiconductor laser pickup
readout
Type
2-way 2-speaker system
5 cm (2") tweeter
10 cm (4") woofer
D/A converter Multi bit D/A converter
Frequency
response
20 - 20,000 Hz
Maximum input
power
50 W
Rated input power 25 W
Dynamic
range
90 dB (1 kHz)
Impedance
Dimensions
6 ohms
Width: 132 mm (5-13/64")
Height: 260 mm (10-15/64")
Depth: 171.5 mm (6-49/64")
Weight
1.98 kg (4.36 lbs.)/each
23
Download from Www.Somanuals.com. All Manuals Search And Download.
FOR LOCATION ENQUIRIES WITHIN
FOR LOCATION ENQUIRIES WITHIN
AUSTRALIA
REGARDING YOUR LOCAL
NEW ZEALAND
REGARDING YOUR LOCAL
SHARP APPROVED SERVICE CENTRE
VISIT OUR WEBSITE AT
SHARP APPROVED SERVICE CENTRE
VISIT OUR WEBSITE AT
CONTACT YOUR SELLING DEALER/RETAILER
OR CALL
OR CALL SHARP CUSTOMER CARE
SHARP CUSTOMER SERVICES
1300 135 022
TELEPHONE: 09 573 0111
FACSIMILE: 09 573 0113
(LOCAL CALL COSTS APPLY WITHIN AUSTRALIA)
SHARP CORPORATION OF AUSTRALIA PTY LTD
SHARP CORPORATION OF NEW ZEALAND LIMITED
SPform019(JUNE 2004)
SHARP CORPORATION
09J R MW 1
92L410CM904021
Download from Www.Somanuals.com. All Manuals Search And Download.
|