ENGLISH
● XL-HF201PH(S) Hi Fi Component System consisting of XL-HF201PH(S) (main unit) and CP-HF200H (speaker
system).
● XL-HF201PH(BK) Hi Fi Component System consisting of XL-HF201PH(BK) (main unit) and CP-HF200H (speaker
system).
● XL-HF301PH(S) Hi Fi Component System consisting of XL-HF301PH(S) (main unit) and CP-HF301H (speaker
system).
Introduction
Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual
carefully. It will guide you in operating your SHARP product.
Special Note
Supply of this product does not convey a license nor imply any right to distribute content created with this product in
revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue-generating
streaming applications (via Internet, intranets and/or other networks), other revenue-generating content distribution
systems (pay-audio or audio-on-demand applications and the like) or on revenue-generating physical media (compact
discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
Accessories
The following accessories are included.
SB
CD/U
RDS
Adaptors for iPhone x 3
Remote control x 1
RRMCGA263AWSA
“AA” size battery
(UM/SUM-3, R6, HP-7 or
similar) x 1
Stand for iPad x 1
Speaker wires x 2
(for XL-HF-201PH(S)/(BK))
Speaker wires x 2
(for XL-HF-301PH(S))
FM aerial x 1
The illustrations printed in this operation manual are for the model XL-HF301PH(S).
CONTENTS
Page
Page
General Information
USB
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . 2 - 3
Listening to USB mass storage
device/MP3 player . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Advanced USB playback . . . . . . . . . . . . . . . . . . . . . . . 14
Preparation for Use
System connections . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 5
Radio
Listening to the radio . . . . . . . . . . . . . . . . . . . . . . .14 - 15
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Basic Operation
Advanced Features
General control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Setting the clock (Remote control only). . . . . . . . . . . 6 - 7
Using the Radio Data System (RDS) . . . . . . . . . 15 - 17
Timer and sleep operation
(Remote control only) . . . . . . . . . . . . . . . . . . . . . 18 - 19
Enhancing your system . . . . . . . . . . . . . . . . . . . . . . . . 20
iPod, iPhone and iPad
Listening to the iPod, iPhone or iPad. . . . . . . . . . . . . 7 - 9
References
CD or MP3/WMA disc Playback
Troubleshooting chart . . . . . . . . . . . . . . . . . . . . . .20 - 21
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Listening to a CD or MP3/WMA disc . . . . . . . . . . . 9 - 10
Advanced CD or MP3/WMA disc playback . . . . . . 10 - 11
MP3/WMA folder mode (only for MP3/WMA files). . . . . 12
Download from Www.Somanuals.cEom-1. All Manuals Search And Download.
Controls and indicators (continued)
■
Remote control
1
Page
1. Remote Control Transmitter . . . . . . . . . . . . . . . . . 5
2. On/Stand-by Button . . . . . . . . . . . . . . . . . 6, 8, 9, 18
3. Numeric Buttons . . . . . . . . . . . . . . . . . . . . . . . . . 10
4. Bass/Treble Button . . . . . . . . . . . . . . . . . . . . . . . . 6
5. X-Bass Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
6. Tuning Down, Skip Down, Fast Reverse,
2
17
18
19
20
3
Time Down Button . . . . . . . . . . . . . . 6, 9, 12, 14, 18
7. Tuner Preset Up Button,
iPod Cursor Up. . . . . . . . . . . . . . . . . . . . . . 8, 13, 14
8. Volume Down Button. . . . . . . . . . . . . . . . . . . . . . . 6
9. Folder Button . . . . . . . . . . . . . . . . . . . . . . . . . 12, 13
10. Tuner Preset Down Button,
21
22
23
24
25
4
5
6
7
8
iPod Cursor Down . . . . . . . . . . . . . . . . . . . 8, 13, 14
11. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
12. USB Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
13. iPod Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
14. iPod Display (TV OUT) Button. . . . . . . . . . . . . . . . 8
15. Disc/USB Display Button. . . . . . . . . . . . . . . . 12, 13
16. RDS ASPM Button . . . . . . . . . . . . . . . . . . . . . . . 15
17. Open/Close Button . . . . . . . . . . . . . . . . . . . . . . . . 9
18. Memory Button. . . . . . . . . . . . . . . . . . . . . . . . 10, 14
19. Clear Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
20. Clock/Timer Button . . . . . . . . . . . . . . . . . . . . . 6, 18
21. Sleep Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
22. Repeat Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
23. Mute Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
24. Random Button . . . . . . . . . . . . . . . . . . . . . . . . . . 11
25. Tuning Up, Skip Up, Fast Forward,
26
27
9
28
10
11
12
13
14
15
29
30
31
32
33
34
35
36
CD/USB
RDS
16
Time Up Button . . . . . . . . . . . . . . . . 6, 9, 12, 14, 18
26. Volume Up Button . . . . . . . . . . . . . . . . . . . . . . . . . 6
27. Enter Button . . . . . . . . . . . . . . . . . . . . . . 6, 8, 13, 14
28. Demo/Dimmer Button . . . . . . . . . . . . . . . . . . . . 4, 6
29. Audio/Line (INPUT) Button . . . . . . . . . . . . . . . 5, 20
30. Tuner Button . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15
31. iPod Play/Pause Button. . . . . . . . . . . . . . . . . . . . . 9
32. iPod Menu Button . . . . . . . . . . . . . . . . . . . . . . . . . 9
33. CD/USB Play/Pause Button. . . . . . . . . . . . 9, 10, 13
34. CD/USB Stop Button . . . . . . . . . . . . . . . . . 9, 10, 13
35. RDS Display Button . . . . . . . . . . . . . . . . . . . . . . 15
36. RDS PTY Button. . . . . . . . . . . . . . . . . . . . . . . . . . 15
9
15
10 11121314 16
1 2 3
4 5
6 7
8
■
Display
17
18 19 20 21 22
Page
23 24 2526 27 28 29
1. USB Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2. iPod Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3. CD Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4. MP3 Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
5. WMA Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
6. RDM (Random) Indicator. . . . . . . . . . . . . . . . . . . 11
7. MEM (Memory) Indicator . . . . . . . . . . . . . . . . . . . 11
8. Repeat Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . 10
9. Play/Pause Indicator . . . . . . . . . . . . . . . . . . . . . . 10
10. Tuning FM Indicator. . . . . . . . . . . . . . . . . . . . . . . 15
11. FM Stereo Mode Indicator. . . . . . . . . . . . . . . . . . 15
12. Stereo Station Indicator . . . . . . . . . . . . . . . . . . . 15
13. RDS Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
14. PTY Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
15. TP Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
16. TA Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
17. Muting Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . 6
18. X-bass Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . 6
19. Title Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
20. Artist Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
21. Folder Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 11
22. Album Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 12
23. File Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
24. Track Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
25. Daily Timer Indicator . . . . . . . . . . . . . . . . . . . . . . 18
26. Once Timer Indicator. . . . . . . . . . . . . . . . . . . . . . 18
27. Disc Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
28. Total Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
29. Sleep Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
■
Speaker system
1. Dome-Tweeter
2. Woofer
3. Bass Reflex Duct
4. Speaker Terminal
1
3
2
4
■
Speaker grilles are removable
Make sure nothing comes into contact
with the speaker diaphragms when
you remove the speaker grilles.
Download from Www.Somanuals.cEom-3. All Manuals Search And Download.
System connections
Make sure to unplug the AC power lead before making any connections.
Right
speaker
TV
FM aerial
Video cable
(not supplied)
To video input socket
Left
speaker
Red
Wall socket
(AC 220 - 240 V ~ 50/60 Hz)
■
Aerial connection
■
Demonstration mode
Supplied FM aerial:
● The first time the unit is plugged in, the unit will enter
the demonstration mode.
● To cancel the demonstration mode, press the DEMO/
DIMMER button (remote control) during power stand-
by mode. The unit will enter the low power consumption
mode.
● If iPod or iPhone is docked, the unit will begin charging.
“Charge Mode” will be displayed. Demonstration mode
is invalid during charge mode.
● To return to the demonstration mode, press the DEMO/
DIMMER button again.
Connect the FM aerial wire to the FM 75 OHMS socket and
position the FM aerial wire in the direction where the
strongest signal can be received.
External FM aerial:
Use an external FM aerial (75 ohms coaxial cable) for
better reception. When an external FM aerial is used,
disconnect the supplied FM aerial wire.
Note:
Placing the aerial on the unit or near the AC power lead
may cause noise pickup. Place the aerial away from the
unit for better reception.
■
●
Speaker connection
■
Connecting iPod or iPhone to TV
For XL-HF201P(S)/(BK) – Connect
the black wire to the minus (–)
terminal, and the red wire to the
plus (+) terminal.
For XL-HF301P(S) – Connect the
wire without insulation tube to the
minus (–) terminal, and the wire with
red insulation tube to the plus (+)
terminal.
Photo and video files from iPod or iPhone can be viewed
by connecting the system to TV/monitor.
If the TV/monitor has a video input, connect it to the VIDEO
OUT socket at the back of the unit and set the TV Out on
the iPod or iPhone unit to “ON” position.
Note:
Please make sure to set iPod unit to either NTSC or PAL to
match your TV signal. Please visit Apple’s homepage for
further information.
●
Incorrect
● Connect the wire without insulation tube to the minus (–
) terminal, and the wire with red insulation tube to the
plus (+) terminal.
● Use speakers with an impedance of 4 ohms or more, as
lower impedance speakers can damage the unit.
● Do not mistake the right and the left channels. The right
speaker is the one on the right side when you face the
unit.
■
AC power connection
After checking all the connections have been made
correctly, plug the AC power lead of this unit into the wall
socket.
● Do not let the bare speaker wires touch each other.
● Do not allow any objects to fall into or to be placed in
the bass reflex ducts.
Note:
● Do not stand or sit on the speakers. You may be
injured.
Unplug the AC power lead from the wall socket if the unit
will not be in use for a prolonged period of time.
Download from Www.Somanuals.cEom-4. All Manuals Search And Download.
System connections (continued)
Remote control
■
Subwoofer pre-out connection
■
Battery installation
You can connect
SUBWOOFER PRE OUT socket.
a
subwoofer with an amplifier to the
Open the battery cover.
1
2
Insert the supplied battery according to the terminal
indicated in the battery compartment.
Commercially available subwoofer
(amplifier built in)
Audio cable
(commercially
available)
When inserting or removing the battery, push it towards the
(–) battery terminals.
Audio signal
Close the cover.
3
To audio input
socket
ToSUBWOOFERPRE
OUT socket
Main
unit
Caution:
●
Remove the battery if the unit will not be used for a long
period of time. This will prevent potential damage due to
battery leakage.
Notes:
●
●
●
Do not use rechargeable battery (nickel-cadmium battery,
●
No sound is heard from the subwoofer without a built-in
amplifier.
etc.).
Installing the battery incorrectly may cause the unit to
malfunction.
●
Subwoofer Pre-out (audio signal): 200mV / 10k ohms at
70 Hz.
Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the
like.
■
Line input connection (TV, etc.)
Notes concerning use:
Connect to the TV using an audio cable
.
●
Replace the battery if the operating distance is reduced or
if the operation becomes erratic. Purchase an “AA” size
battery (UM/SUM-3, R6, HP-7 or similar).
To audio
output sockets
TV
●
●
Periodically clean the transmitter on the remote control
and the sensor on the unit with a soft cloth.
Exposing the sensor on the unit to strong light may
interfere with operation. Change the lighting or the
direction of the unit if this occurs.
Keep the remote control away from moisture, heat, shock,
and vibrations.
Audio cable
(commercially
available)
●
■
Test of the remote control
Check the remote control after checking all the connections.
Point the remote control directly at the remote sensor on the
unit. The remote control can be used within the range shown
below:
Remote sensor
To LINE
input
sockets
Main
unit
0.2 m - 6 m
(8" - 20' )
CD/USB
RDS
To select Line In function:
●
On main unit: Press FUNCTION button repeatedly until
Line In is displayed.
●
On remote control: Press AUDIO/LINE (INPUT) button
repeatedly until Line In is displayed.
Download from Www.Somanuals.cEom-5. All Manuals Search And Download.
General control
■
Bass control
1
Press the BASS/TREBLE button to select “Bass”.
Within 5 seconds, press the VOLUME (+ or –) button to
adjust the bass.
2
........
- 5 ↔ - 4
↔ + 4 ↔ + 5
■
Treble control
CD/USB
RDS
1
2
Press the BASS/TREBLE button to select “Treble”.
Within 5 seconds, press the VOLUME (+ or –) button to
adjust the treble.
■
To turn the power on
Press the ON/STAND-BY button to turn the power on.
........
- 5 ↔ - 4
↔ + 4 ↔ + 5
After use:
■
Function
Press the ON/STAND-BY button to enter the power stand-
by mode.
When the FUNCTION button on main unit is pressed, the
current function will change to different mode. Press the
FUNCTION button repeatedly to select desired function.
■
Display brightness control
To dim the display brightness, press the DEMO/DIMMER
button on the remote control.
FM STEREO
CD
FM MONO
(Display is dim).
Dimmer 1
Dimmer 2
Dimmer off
USB
iPod
Audio In
Line In
(Display gets dimmer).
(Display is bright).
Note:
The backup function will protect the memorised function
mode for a few hours should there be a power failure or the
AC power lead becomes disconnected.
■
Volume auto fade-in
If you turn off and on the main unit with the volume set to 27
or higher, the volume starts at 16 and fades in to the last set
level.
Setting the clock (Remote control only)
■
Volume control
Turn the volume knob towards VOLUME +/– (on main unit) or
press VOL +/– (on remote control) to increase or decrease the
volume.
■
Auto power on function
When you press any of the following buttons, the unit turns on.
●
iPod, CD, USB, AUDIO / LINE (INPUT), TUNER on the
remote control: Selected function is activated.
CD/USB
RDS
●
/
button on the main unit: The unit turns on and play-
back of the last function will start (CD, TUNER, USB, iPod,
AUDIO IN, LINE IN)
In this example, the clock is set for the 24-hour (0:00) display.
■
Auto power off function
1
2
3
Press the ON/STAND-BY button to turn the power on.
Press the CLOCK/TIMER button.
The main unit will enter the stand-by mode (when iPod or
iPhone is not docked) after 15 minutes of inactivity during:
iPod or iPhone: No connection.
Within 10 seconds, press the ENTER button. To adjust
CD / USB: In the stop mode.
the day, press the
ENTER button.
or
button and then press the
AUDIO IN / LINE IN: No detection of input signal or very low
sound audibility.
Note:
However, if iPod or iPhone is docked, the unit will begin
charging. “Charge Mode” will be displayed.
4
Press the
or
button to select 24-hour or 12-hour
display and then press the ENTER button.
The 24-hour display will appear.
(0:00 - 23:59)
■
Muting
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
The volume is muted temporarily when pressing the
button
on the remote control. Press again to restore the volume.
The 12-hour display will appear.
(AM 0:00 - PM 11:59)
■
X-Bass control
5 To adjust the hour, press the
or
button and then
or button
When the power is first turned on, the unit will enter the extra
bass mode which emphasises the bass frequencies, and
“X-BASS ON” will appear. To cancel the extra bass mode,
press the X-BASS button on the remote control.
press the ENTER button. Press the
once to advance the time by 1 hour. Hold it down to
advance continuously.
Download from Www.Somanuals.cEom-6. All Manuals Search And Download.
Setting the clock (Remote control
only) (continued)
■
iPod, iPhone and iPad connection (USB
only)
1 Insert the connector to the iPod, iPhone or iPad.
6 To adjust the minutes, press the
or
button and
or
then press the ENTER button. Press the
button once to advance the time by 1 minute. Hold it
down to advance the time by 5 minutes interval.
iPad
To confirm the time display:
Press the CLOCK/TIMER button. The time display will
appear for about 5 seconds.
Connector
Note:
When power supply is restored after unit is plugged in again
or after a power failure, reset the clock (pages 6-7).
2 Place the iPad to the stand for iPad.
To readjust the clock:
Perform “Setting the clock” from step 1. If the “Clock” does not
appear in step 2, step 4 (for selecting the 24-hour or 12-hour
display) will be skipped.
iPad
To change the 24-hour or 12-hour display:
1 Clear all the programmed contents. [Refer to “Factory
reset, clearing all memory” on page 21 for details.]
Stand for iPad
2 Perform “Setting the clock” from step 1 onwards.
Listening to the iPod, iPhone or iPad
3 Connect the iPod, iPhone or iPad to the unit via USB
connector.
Made for:
USB
th
rd
nd
st
●
●
●
●
●
●
●
●
●
●
●
●
iPod touch (4 generation)
iPod touch (3 generation)
iPod touch (2 generation)
iPod touch (1 generation)
iPod classic
th
th
th
rd
iPod nano (6 generation)
iPod nano (5 generation)
iPod nano (4 generation)
iPod nano (3 generation)
nd
iPod nano (2 generation)
iPhone 4
iPhone 3GS
Note:
●
●
●
iPhone 3G
iPhone
iPad
USB terminal does not support VIDEO out.
Caution:
■
iPod, iPhone or iPad playback (USB)
Please update your iPod, iPhone and iPad unit to the latest
software version before using it. Please visit Apple’s
homepage to download the latest version for your iPod,
iPhone and iPad.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the USB button on the remote control or
FUNCTION button repeatedly on the main unit to select
USB function.
Notes:
●
Charging terminal for iPod, iPhone and iPad:
3 Connect iPod, iPhone or iPad to the unit. “USB/iPod” will
Condition
USB function
Other function
Stand-by
DOCK
NO
YES
YES
USB
YES
NO
appear.
NO
Track number
●
●
●
The message “This accessory is not made to work with
iPhone” or similar, may appear on the iPhone screen
when:
4 Press the
/
(CD/USB
/
) button to start playback.
- battery is low.
- the iPhone is not properly docked (eg. slanting).
If this occurs, remove and re-dock the iPhone.
This product is made for iPhone. To prevent random
interference when iPhone is docked, the headphone
output is disabled, and “HP INVALID” will be
displayed.
You may also experience brief audio interference
during incoming calls.
Note:
Stop button ( ) is invalid during iPod, iPhone or iPad play-
back.
■
iPhone playback
● Sound will only switch from iPhone to the main unit
after authentication process is completed in
approximately 10 seconds.
● Incoming calls will pause the playback.
● Once the calls are answered, the conversation can only
be heard through the built-in iPhone speaker. Turn on
the iPhone speaker or undock the iPhone to start
conversation.
The headphone output is switched off during inserting
iPod, iPhone and iPad unit. This is an Apple product
specification.
Download from Www.Somanuals.cEom-7. All Manuals Search And Download.
Listening to the iPod, iPhone or iPad (continued)
■
iPod and iPhone connection (Dock only)
■
iPod or iPhone playback (Dock)
Note:
1
2
Press the ON/STAND-BY button to turn the power on.
Docking station is not recommended for iPad connection.
Press the iPod or iPhone button on the remote control or
FUNCTION button repeatedly on the main unit to select iPod
function.
Adaptor for iPod and iPhone connection
Notes:
●
●
Please use the adaptor supplied with your iPod or iPhone unit.
You can use an audio cable to connect your iPod to the AUDIO
3
4
Insert iPod or iPhone unit into the dock of main unit. “DOCK
OK” will appear.
IN socket if:
1. your iPod adaptor does not fit into the iPod dock on the
main unit.
Press the
playback.
/
(iPod or iPhone
/
)
button to start
2. you have an iPod that does not have an iPod adaptor.
3. you have an iPod that does not have an iPod 30 pin
connector.
Adaptor
No.
iPhone
Description
Capacity
12
15
15
19
iPhone
4GB & 8GB & 16GB
8GB & 16GB
16GB & 32GB
16GB & 32GB
iPhone 3G
iPhone 3GS
iPhone 4
■
To insert adaptor for iPod or iPhone
1 Open the docking station for iPod and iPhone by pulling
up.
CD/USB
RDS
■
To disconnect iPod, iPhone or iPad
2 Insert the adaptor for iPod or iPhone into unit and
connect your iPod or iPhone.
Simply remove the iPod or iPhone from the docking station
or iPad connector from USB terminal. It is safe to do so
even during playback.
iPhone
iPhone (bottom)
■
Watching videos on a TV connected to
iPod or iPhone
Dock connector
1 Press the DISPLAY (TV OUT) button for more than 2
seconds until “TV OUT ON” appear on display.
Adaptor for iPhone
Dock for iPhone
2 Press the ENTER button to start playback.
Notes:
● If the TV Out setting is already turned on at video menu,
the video is automatically displayed on the TV screen
when ENTER key is pressed.
● USB terminal does not support VIDEO OUT.
● To return to watching video on iPod or iPhone screen,
press the MENU button to enter video menu. Then
press the DISPLAY (TV OUT) button for more than 2
seconds until “TV OUT OFF” appears.
● During iPod or iPhone video playback, pressing the
DISPLAY (TV OUT) button will not toggle video out
display between iPod and TV.
Connector for iPhone
Caution:
Unplug all accessories from the iPod or iPhone before
inserting it into the dock.
■
To remove adaptor for iPod or iPhone
Caution:
Insert the tip of a screwdriver (“–” type,
small) into the adaptor hole as shown
and lift upward to remove.
● Unplug all accessories for the iPod or iPhone before
inserting it into the docking station.
● Stop button ( ) at main unit is invalid during iPod
function.
Download from Www.Somanuals.cEom-8. All Manuals Search And Download.
Listening to the iPod, iPhone or iPad
(continued)
Function Main unit
Dock/USB
Remote control
Dock USB
Operation
iPod
____
____
____
Menu
Press to view the
iPod menu during
iPod function.
■
Navigating the iPod, iPhone or iPad
menus
Enter
Presstoconfirmthe
selection.
1
Press the MENU button to view the menu on iPod, iPhone or
iPad unit. Press it again to go back to previous menu.
2
Use the PRESET ( or ) button to select an item on the
menu and then press ENTER button.
Cursor
Up/Down
Press to select the
iPod menu.
Note:
When navigating the iPod, iPhone or iPad menu with remote
control, do not operate any of the buttons on the iPod or iPhone
unit. The volume level is adjusted by pressing the VOL (+ or –)
button on the main unit or the remote control. Adjusting the
volume on the iPod, iPhone or iPad units give no effect.
Listening to a CD or MP3/WMA disc
iPod, iPhone and iPad operations:
The operations described below depend on the generation iPod,
iPhone and iPad you are using.
System on operation:
When the main unit is powered on, the iPod, iPhone or iPad units
will automatically power on when docked or connected in the unit.
System off (stand-by operation):
When the main unit is turned to stand-by mode, the docked iPod,
iPhone or connected iPad unit will automatically turn to stand-by
mode.
■
Various iPod, iPhone and iPad functions
Function Main unit
Dock/USB
Remote control
Operation
CD/USB
RDS
Dock
USB
Play
Press in the pause
mode.
iPod
CD/USB
This system can play back a standard CD, CD-R/RW in the CD
format and CD-R/RW with MP3 or WMA files, but cannot record
on them. Some audio CD-R and CD-RW discs may not be
playable due to the state of the disc or the device that was used
for recording.
Pause
Press in the
iPod
CD/USB
playback mode.
Track up/
down
Press in the
MP3:
playback or pause
mode.
MP3 is a form of compression. It is an acronym which stands
for MPEG Audio Layer 3. MP3 is a type of audio code which
is processed by significant compression from the original
audio source with very little loss in sound quality.
If you press the
button in the pause
mode, press the
/
button to start the
desired track.
●
This system supports MPEG 1 Layer 3 and VBR files.
●
During VBR file playback, time counter in the display may
differ from its actual playback time.
Fast
forward/
reverse
Press and hold
down in the
●
Bitrate which is supported by MP3 is 32 ~ 320 kbps.
playback mode.
Release the button
to resume
WMA:
WMA files are Advanced System Format files that include
audio files which are compressed with Windows Media
Audio codec. WMA is developed by Microsoft as an audio
format file for Windows Media Player.
playback.
____
Display
Press for more than
2 seconds to toggle
the video out
iPod
●
“MP3” and “WMA” indicator will light up after the unit reads
information on an MP3 or WMA disc.
display between
iPod or TV.
●
Bitrate which is supported by WMA is 64 ~ 160 kbps.
Disc playback
____
____
Repeat
Shuffle
Press to toggle
repeat mode.
■
1
2
Press the ON/STAND-BY button to turn the power on.
Press to toggle
shuffle mode.
Press the CD button on the remote control or FUNCTION
button repeatedly on the main unit to select CD function.
3
4
Press the OPEN/CLOSE button to open the disc tray.
Place the disc on the disc tray, label side up.
Download from Www.Somanuals.cEom-9. All Manuals Search And Download.
Listening to a CD or MP3/WMA disc
(continued)
Advanced CD or MP3/WMA disc
playback
5 Press the OPEN/CLOSE button to close the disc tray.
CD/USB
RDS
6
Press the
/
(CD/USB
/
) button to start playback. After
the last track is played, the unit will stop automatically.
Caution:
●
●
Do not place two discs in one disc tray.
■
Direct track search
Do not play discs of special shapes (heart, octagon, etc). It
may cause malfunctions.
By using the Numeric buttons, the desired tracks on the
current disc can be played.
Use the Numeric buttons on the remote control to select
the desired track whilst playing the selected disc.
●
●
●
●
Do not push the disc tray whilst it is moving.
If the power fails whilst the tray is open, wait until the power
is restored.
If TV or radio interference occurs during CD operation, move
the unit away from the TV or radio.
Be sure to place 8 cm (3") disc in the middle of the disc tray.
Due to the structure of the disc information, it takes longer to
read an MP3/WMA disc than a normal CD (approximately 20
to 90 seconds).
●
The Numeric buttons allow you to select up to number 9.
When selecting number 10 or higher, use the “10+” button.
●
●
A. For example, to choose 13
1
2
3
Press the “10+” button once.
Press the “1” button.
Notes for CD or MP3/WMA disc:
●
Press the “3” button.
When the end of the last track is reached during fast forward,
“END” will appear on the display and CD operation will be
paused. When the beginning of the first track is reached
during fast reverse, the unit will enter the playback mode (only
for CD).
Rewritable multi-session discs with unfinished writing, can
still be played.
Selected track number
B. For example, to choose 130
1
2
3
4
Press the “10+” button twice.
Press the “1” button.
●
Press the “3” button.
Press the “0” button.
■
Various disc functions
Notes:
Function
Play
Main
unit
Remote
control
Operation
●
A track number higher than the number of tracks on the
disc cannot be selected.
Press in the stop mode.
●
During random play, direct search is not possible.
To stop playback:
Press the (CD/USB ) button.
Stop
Press in the playback
mode.
■
Repeat play
Repeat play can play one track, all tracks or a programmed
sequence continuously.
Pause
Press in the playback
mode. Press the
button to resume
playback from the
paused point.
/
To repeat one track:
Press the REPEAT button repeatedly until “Repeat One”
appears. Press the
/
(CD/USB
/
) button.
Track
up/
down
To repeat all tracks:
Press in the playback or
stop mode.
Press the REPEAT button repeatedly until “Repeat All”
If you press the button in
the stop mode, press the
appears. Press the
To repeat desired tracks:
Perform steps 1 - 5 in “Programmed play” section on page 11
and then press the REPEAT button repeatedly until “Repeat
All” appears.
/
(CD/USB
/
) button.
/
button to start the
desired track.
Fast
forward/
reverse
Press and hold down in
the playback mode.
Release the button to
resume playback.
To cancel repeat play:
Press the REPEAT button repeatedly until “Normal” appears
and “
” disappears.
Caution:
After performing repeat play, be sure to press the (CD/
USB ) button. Otherwise, the disc will play continuously.
E-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced CD or MP3/WMA disc playback (continued)
■
Random play
■
Programmed play (MP3/WMA)
The tracks on the disc can be played in random order
automatically.
1 Whilst in the stop mode, press the MEMORY button to
enter the programming save mode.
To random play all tracks:
Press RANDOM button on the remote control until “Random”
appears. Press the
/
(CD/USB
/
) button.
To cancel random play:
Press the RANDOM button again. “RDM” indicator will
disappear.
2 Press the PRESET (
or
) button on the remote
control to select the desired folder.
Notes:
Then press the
to select the desired tracks.
or
button on the remote control
●
If you press the
button during random play, you can
button does not allow you to
move to the track selected next by the random operation.
On the other hand, the
move to the previous track. The beginning of the track
being played will be located.
●
In random play, the unit will select and play tracks
automatically. (You cannot select the order of the tracks.)
3 Press the MEMORY button to save the folder and track
number.
■
Programmed play (CD)
4 Repeat steps 2 – 3 for other folder/tracks. Up to 32
tracks can be programmed.
You can choose up to 32 selections for playback in the order
you like.
5 Press the
/
(CD/USB / ) button to start playback.
1
Whilst in the stop mode, press the MEMORY button on the
remote control to enter the programming save mode.
To cancel the programmed play mode:
During programmed stop mode, press the (CD/USB
)
button. The display will show “Memory Clear” and all the
programmed contents will be cleared.
Adding tracks to the programme:
2 Press the numeric button or
or
buttons on the
If a programme has been previously stored, the “MEM”
indicator will be displayed. Press the MEMORY button.
Then follow steps 2 - 3 to add tracks.
remote control to select the desired track.
Notes:
● When a disc is ejected, the programme is automatically
cancelled.
Selected track number
● If you press the ON/STAND-BY button to enter the
stand-by mode or change the function from CD to
another, the programmed selections will be cleared.
● During the programme operation, random play is not
possible.
3
4
Press the MEMORY button to save the track number.
Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be
programmed. If you want to check the programmed tracks,
press the MEMORY button repeatedly. If you make a
mistake, the programmed tracks can be cleared by
pressing the CLEAR button.
5 Press the
/
(CD/USB / ) button to start playback.
E-11
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3/WMA folder mode (only for MP3/WMA files)
To play back MP3/WMA (Windows Media Audio) file
There are many music sites on the internet that you can
download MP3/WMA (Windows Media Audio) music files.
Follow the instructions from the website on how to
download the music files. You can then play back these
downloaded music files by burning them to a CD-R/RW
disc.
● Your downloaded song/files are for personal use only.
Any other usage of the song without owner’s
permission, is against the law.
CD/USB
RDS
■
About folder playback order
If MP3/WMA files are recorded in several folders, a folder
number will be set to each folder automatically.
■
Procedure to playback MP3/WMA disc with
folder mode on
These folders can be selected by the FOLDER button on
the remote control. If there is no supported file formats
inside the selected folder, the folder is skipped and the next
folder will be selected.
To play back CD-R/RW.
1 Press the CD button, and load an MP3/WMA disc.
Press the FOLDER button and disc info will be
displayed.
Example: How to set folder number if MP3/WMA format
files are recorded as below figure.
1 ROOT folder is set as folder 1.
MP3 indicator
TOTAL indicator
WMA indicator
2 As for folders inside ROOT folder (Folder A and Folder
B), the folder which is recorded earlier on the disc will be
set as folder 2 and folder 6.
3 As for folder inside Folder A (Folder C and Folder D), the
folder which is recorded earlier on the disc will be set as
folder 3 and folder 4.
Total number of folder Total number of files
2 Press the PRESET ( or ) button to select desired
playback folder. (Folder mode on)
4 Folder E that is inside Folder D will be set as folder 5.
FOLDER
indicator
● The folder and file order information which is recorded
on the disc depends on the writing software. There
maybe possibilities that this unit will playback the files
not according to our expected playback order.
● For CD MP3/WMA, 999 numbers of folders and files
inclusive of the folders which have non playable files
can be read.
First track number
in the folder
FOLDER number
3 Select desired file to be played back by pressing the
or button.
Folder mode on/off can be operated by the FOLDER
button on the remote control. Files that are played when
folder mode is set to the on position, may differ from those
played back when folder mode is turned off.
4 Press the
/
(CD/USB / ) button. Playback will start
and file name will be displayed.
● Title, Artist and Album name are displayed if they are
recorded on the disc.
● In case of playback with the folder mode on, press
the PRESET ( or ) button, and the folder can be
selected even though it is in playback/pause mode.
It will continue playback/pause mode in the 1st track
of the selected folder.
FILE 1
ROOT
FOLDER A
FOLDER C
FILE 2
(FOLDER 1) (FOLDER 2) (FOLDER 3)
FILE 3
FOLDER D
(FOLDER 4)
FILE 4
FILE 5
FILE 6
FOLDER E
(FOLDER 5)
FILE 7
FILE 8
● Display content can be changed by pressing the CD/
USB DISPLAY button.
File name display
Folder display
Title display
FOLDER B
(FOLDER 6)
FILE 9
FILE 10
Counter display
Album display
Artist display
Note:
If “Not Support” is displayed, it means “Copyright protected
WMA file” or “Not supported playback file” is selected.
E-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to USB mass storage device/MP3 player
2 Press the FOLDER button, and press the PRESET (
or ) button to select desired playback folder. To start
playback with folder mode on, go to step 4. To change
the playback folder, press the PRESET ( or ) button
to select another folder.
3 Select desired file to be played back by pressing the
or
button.
4 Press the
/
(CD/USB
/
)
button. Playback will start
and the file name will be displayed.
● Title, Artist and Album name are displayed if they are
recorded in the USB memory device.
● Display content can be changed by pressing the
CD/USB DISPLAY button.
CD/USB
RDS
■
To remove USB memory device
1 Press the
(CD/USB ) button to stop playback.
2 Disconnect USB memory device from the USB terminal.
Note:
This product is not compatible with MTP and AAC file
systems from USB mass storage device or MP3 player.
■
To play back USB/MP3 player with folder
mode off
1 Press the USB button on the remote control or
FUNCTION button repeatedly on main unit to select
USB function. Connect the USB memory device that
has MP3/WMA format files on the unit. When the USB
memory is connected to the main unit, the device
information will be displayed.
Notes:
● SHARP will not be held liable for the loss of data whilst
the USB memory device is connected to the audio
system.
● Files compressed in MP3 and/or WMA format can be
played back when connected to the USB terminal.
● This USB memory’s format supports FAT 16 or FAT 32.
● SHARP cannot guarantee that all USB memory
devices will work on this audio system.
● USB cable is not recommended for use in this audio
system to connect to USB memory device. Use of the
USB cable will affect the performance of this audio
system. iPod, iPhone and iPad is not prone to this
condition.
2 Select desired file to be played back by pressing the
or
button.
● This USB memory cannot be operated via USB hub.
● The USB terminal in this unit is not intended for a PC
connection but is used for music streaming with a USB
memory device.
3 Press the
/
(CD/USB
/
) button. Playback will start
and the file name will be displayed.
● External HDD-storage cannot be played back via USB
terminal.
● Title, Artist and Album name are displayed if they are
recorded in the USB memory device.
● If the data inside the USB memory is large, it may take
longer time for the data to be read.
● This product can play WMA and MP3 files. It will
● Display content can be changed by pressing the
CD/USB DISPLAY button.
automatically detect the file type being played. If
unplayable file is played on this product, “Not Support”
is indicated and the file will be automatically skipped.
This will take a few seconds. If abnormal indications
appear on the display due to the unspecified file, turn
off the unit and then turn it on again.
Note:
To pause playback:
Press the (CD/USB / ) button.
/
■
To play back USB/MP3 player with folder
mode on
● This product relates to USB mass storage devices and
MP3 players. It may however face some irregularities
due to various unforeseen reasons from some devices.
Should this happen, turn off the unit and then turn it on
again.
1 Press the USB button on the remote control or
FUNCTION button repeatedly on main unit to select
USB function. Connect the USB memory device that
has MP3/WMA format files on the unit. When the USB
memory is connected to the main unit, the device
information will be displayed.
● During CD function, MP3 player will not be charging.
E-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced USB playback
Listening to the radio
The following functions are the same as CD
operations:
Page
Direct track search. . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Repeat play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Random play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Programmed play (MP3/WMA) . . . . . . . . . . . . . . . . . .11
Note:
If USB memory device is not connected, “USB No Media”
will be shown on the display.
Notes:
● This unit only supports “MPEG-1 Audio Layer-3”
format. (Sampling Frequency is 32, 44.1, 48kHz)
● Playback order for MP3 files may differ depending on
the writing software used during file download.
● Bitrate which is supported by MP3 is 32~320 kbps,
WMA is 64~160 kbps.
CD/USB
RDS
● For MP3/WMA files, please put “.MP3” “.WMA”
extension. Files cannot be played back if there is no
MP3/WMA extension.
● Playlists are not supported on this unit.
● This unit can display Folder Name or File Name up to
32 characters.
■
Tuning
● Maximum total number of MP3/WMA files is 65025.
● Total number of folders read is 999 including folder with
non-playable file. However, the display shows only
folder with MP3/WMA files.
● The display playback time may not be displayed
correctly when playing back a variable bitrate file.
● The ID3TAG information supported are TITLE, ARTIST
and ALBUM only. Title name, artist name and album
name can be displayed by pressing the DISPLAY
button during file playback or pause mode.
● WMA meta tag also supports title, artist and album
name which are recorded in WMA files. Copyright
protected WMA files cannot be played back.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the TUNER button repeatedly to select FM Stereo
or FM Mono.
3 Press the TUNING (
or
) button on the remote
control to tune in to the desired station.
● Manual tuning:
Press the TUNING (
or
) button repeatedly to
tune in to the desired station.
● Auto tuning:
When the TUNING ( or
) button is pressed for
more than 0.5 seconds, scanning will start
automatically and the tuner will stop at the first
receivable broadcast station.
Notes:
● When radio interference occurs, auto scan tuning may
stop automatically at that point.
● Auto scan tuning will skip weak signal stations.
● To stop the auto tuning, press the TUNING ( or
button again.
)
● When an RDS (Radio Data System) station is tuned in,
the frequency will be displayed first, and then the RDS
indicator will light up. Finally, the station name will
appear.
● Full auto tuning can be achieved for RDS stations
“ASPM”, see page 16.
To receive an FM stereo transmission:
● Press the TUNER button to select stereo mode and
“ST” indicator will be displayed. “
” and “ ” will
appear when an FM broadcast is in stereo.
● If the FM reception is weak, press the TUNER button to
extinguish the “ST” indicator. The reception changes to
monaural, and the sound becomes clearer.
E-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the radio (continued)
Using the Radio Data System (RDS)
RDS is
a
broadcasting service which
a
growing
■
Memorising a station
number of FM stations provide. These FM stations
send additional signals along with their regular
programme signals. They send their station names,
and information about the type of programme such as
sport, music, etc.
You can store 40 FM stations in memory and recall them
at the push of a button. (Preset tuning)
1 Perform steps 1 - 3 in “Tuning”.
When tuned to an RDS station, “RDS” and the station
name will be displayed.
2 Press the MEMORY button.
“TP” (Traffic Programme) will appear on the display when
the received broadcast carries traffic information, and “TA”
(Traffic Announcement) will appear whilst
information is on air.
a
traffic
“PTYI” (Dynamic PTY Indicator) will appear whilst the
Dynamic PTY station is received.
3 Within 30 seconds, press the PRESET ( or ) button
to select the preset channel number. Store the stations
in memory, in order, starting with preset channel 1.
4 Within 30 seconds, press the MEMORY button to store
that station in memory. If the “MEMORY” and preset
number indicators disappear before the station is
memorised, repeat the operation from step 2.
5 Repeat steps 1 - 4 to set other stations, or to change a
preset station. When a new station is stored in the
memory, the station previously memorised for that
preset channel number will be erased.
You can control the RDS by using the buttons on the
remote control only.
Note:
■
Information provided by RDS
The backup function protects the memorised stations for a
few hours should there be a power failure or the AC power
lead become disconnected.
Each time the RDS DISPLAY button is pressed, the
display will switch as follows:
■
To recall a memorised station
1 Press the PRESET ( or ) button for less than 0.5
seconds to select the desired station.
■
To scan the preset stations
The stations saved in the memory can be scanned
automatically. (Preset memory scan)
CD/USB
RDS
1 Press the PRESET ( or ) button for more than 0.5
seconds. The preset number will flash and the
programmed stations will be tuned in sequentially, for 5
seconds each.
2 Press the PRESET (
or
) button again when the
desired station is located.
Station name (PS)
Frequency
Programme type (PTY)
Radio text (RT)
■
To erase entire preset memory
1 Press the ON/STAND-BY button to enter the stand-by
mode.
When tuning in to a station other than an RDS station or
to an RDS station which sends weak signal, the display
will change in the following order:
2 Whilst pressing down the
button, press the ON/
STAND-BY button until “Tuner Clear” appears.
ON/STAND-BY
No PS
No PTY
No RT
FM 98.80 MHz
E-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Radio Data System (RDS) (continued)
Notes for radio text:
■
Using the Auto Station Programme
Memory (ASPM)
● The first 14 characters of the radio text will appear for
4 seconds and then they will scroll across the display.
● If you tune in to an RDS station which is not
broadcasting any radio text, “No RT” will be displayed
when you switch to the radio text position.
● Whilst radio text data is received or when the text
contents change, “RT” will be displayed.
Whilst in the ASPM operation mode, the tuner will
automatically search for new RDS stations. Up to 40
stations can be stored.
If you have already stored some stations in memory, the
number of new stations you can store will be less.
■
To recall stations in memory
1 Press the TUNER button on the remote control or
FUNCTION button repeatedly on the main unit to
select TUNER function.
To specify programmed types and select stations
(PTY search):
You can search a station by specifying the programme type
(news, sports, traffic programme, etc. ... see page 17) from
the stations in memory.
2 Press and hold down the RDS ASPM button on the
remote control.
1
After “ASPM” has flashed for about 4 seconds,
scanning will start (87.50 - 108.00 MHz).
1 Press the TUNER button on the remote control or
FUNCTION button repeatedly on the main unit to
select TUNER function.
2 Press the RDS PTY button on the remote control.
2
When an RDS station is found, “RDS” will appear
for a short time and the station will be stored in
memory.
“SELECT” and “PTY TI” will appear alternately for
about 6 seconds.
3
After scanning, the number of stations stored in
memory will be displayed for 4 seconds, and then
“END” will appear for 4 seconds.
3 Within 6 seconds, press the PRESET ( or ) button
to select the programme type.
Each time the button is pressed, the programme type
will appear. If the button is held down for more than
0.5 seconds, the programme type will appear
continuously.
To stop the ASPM operation before it is complete:
Press the RDS ASPM button whilst it is scanning for stations.
The stations which are already stored in memory will be kept
there.
4 Whilst the selected programme type is flashing (within
6 seconds), press the RDS PTY button again.
Notes:
● If the same station is broadcasting on different
frequencies, the strongest frequency will be stored in
memory.
● Any station which has the same frequency as the one
stored in memory will not be stored.
● If 40 stations have already been stored in memory, the
scan will be aborted. If you want to redo the ASPM
operation, erase the preset memory.
● If no station have been stored in memory, “END” will
appear for about 4 seconds.
● If the RDS signals are very weak, station names may
not be stored in memory.
● The same station name can be stored in different
channels.
After the selected programme type has been lit for 2
seconds, “SEARCH” will appear, and the search
operation will start.
Notes:
● If the display has stopped flashing, start again from
step 2. If the unit finds a desired programme type, the
corresponding channel number will lit for about
8 seconds, and then the station name will remain it.
● If you want to listen to the same programme type of
another station, press the RDS PTY button whilst the
channel number or station name is flashing. The unit
will look for the next station.
● In a certain area or during certain time periods, the
station names may temporarily be different.
■
Notes for RDS operation
If any of the following events occur, it does not mean
that the unit is faulty:
● “PS”, “No PS” and a station name appear alternately,
and the unit does not operate properly.
● If a particular station is not broadcasting properly or a
station is conducting tests, the RDS reception function
may not work properly.
● When you receive an RDS station whose signal is too
weak, information like the station name may not be
displayed.
● If no station can be found, “NOT FOUND” will appear
for 4 seconds.
If you select the traffic programme:
If you select the traffic programme (TP) in step 3, “TP” will
appear.
(This does not mean that you can listen to the traffic
information at that time.)
When the traffic information is broadcast, “TA” will appear.
● “No PS”, “No PTY” or “No RT” will flash for about 5
seconds, and then the frequency will be displayed.
E-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Radio Data System (RDS) (continued)
Descriptions of the PTY (Programme Type) codes, TP
(Traffic Programme) and TA (Traffic Announcement)
You can search for and receive the following PTY, TP and
TA signals.
RELIGION
PHONE IN
TRAVEL
Any aspect of beliefs and faiths, involving
a God or Gods, the nature of existence
and ethics.
Involving members of the public
expressing their views either by phone or
at a public forum.
Features and programmes concerned
with travel to near and far destinations,
package tours and travel ideas and
opportunities. Not for use for
announcements about problems, delays,
or roadworks affecting immediate travel
where TP/TA should be used.
NEWS
Short accounts of facts, events and
publicly expressed views, reportage and
actuality.
AFFAIRS
Topical programme expanding or
enlarging upon the news, generally in
different presentation style or concept,
including debate, or analysis.
INFO
Programmes whose purpose is to impart
advice in the widest sense.
LEISURE
Programmes concerned with
SPORT
EDUCATE
Programme concerned with any aspect
of sport.
Programme intended primarily to
educate, of which the formal element is
fundamental.
recreational activities in which the
listener might participate. Examples
include, Gardening, Fishing, Antique
collecting, Cooking, Food & Wine, etc.
JAZZ
Polyphonic, syncopated music
characterised by improvisation.
DRAMA
All radio plays and serials.
COUNTRY
Songs which originate from, or continue
the musical tradition of the American
Southern States. Characterised by a
straightforward melody and narrative
story line.
Current Popular Music of the Nation or
Region in that country's language, as
opposed to International “Pop” which is
usually US or UK inspired and in English.
Music from the so-called “golden age” of
popular music.
Music which has its roots in the musical
culture of a particular nation, usually
played on acoustic instruments. The
narrative or story may be based on
historical events or people.
CULTURE
Programmes concerned with any aspect
of national or regional culture, including
language, theatre, etc.
Programmes about the natural sciences
and technology.
Used for mainly speech-based
programmes usually of light-
entertainment nature, not covered by
other categories. Examples include:
quizzes, panel games, personality
interviews.
SCIENCE
VARIED
NATION M
OLDIES
FOLK M
POP M
Commercial music, which would
generally be considered to be of current
popular appeal, often featuring in current
or recent record sales charts.
ROCK M
EASY M
Contemporary modern music, usually
written and performed by young
musicians.
Current contemporary music considered
to be “easy-listening”, as opposed to
Pop, Rock or Classical, or one of the
specialised music styles, Jazz, Folk or
Country. Music in this category is often
but not always, vocal, and usually of
short duration.
Classical music for general, rather than
specialist appreciation. Examples of
music in this category are instrumental
music, and vocal or choral works.
Performances of major orchestral works,
symphonies, chamber music, etc., and
including Grand Opera.
DOCUMENT Programme concerned with factual
matters, presented in an investigative
style.
TEST
Broadcast when testing emergency
broadcast equipment or receivers.
Emergency announcement made under
exceptional circumstances to give
warning of events causing danger of a
general nature.
No programme type (receive only).
Broadcasts which carry traffic
announcements.
ALARM!
LIGHT M
NONE
TP
CLASSICS
OTHER M
TA
Traffic announcements are being
broadcast.
Musical styles not fitting into any of the
other categories. Particularly used for
specialist music of which Rhythm &
Blues and Reggae are examples.
WEATHER
FINANCE
Weather reports and forecasts and
meteorological information.
Stock Market reports, commerce,
trading, etc.
CHILDREN
For programmes targeted at a young
audience, primarily for entertainment
and interest, rather than where the
objective is to educate.
SOCIAL
Programmes about people and things
that influence them individually or in
groups. Includes: sociology, history,
geography, psychology and society.
E-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer and sleep operation (Remote control only)
■
Timer playback
Before setting timer:
● Check that the clock is set to the correct time (refer to
page 6). If it is not set, you cannot use the timer
function.
● For timer playback: Plug in USB or load discs or dock
iPod to be played.
CD/USB
RDS
1
Press the ON/STAND-BY button to turn the power on.
Press and hold the CLOCK/TIMER button.
2
3
Timer playback:
Within 10 seconds, press the
or
button to
The unit turns on and plays the desired source (CD,
TUNER, USB, iPod, AUDIO IN, LINE IN) at a preset time.
select “Once” or “Daily”, and press the ENTER button.
4
5
Within 10 seconds, press the or button to
select “Timer Set”, and press the ENTER button.
This unit has 2 types of timer: ONCE TIMER and DAILY
TIMER.
Once timer:
Once timer play works for one time only at a preset time.
(“ ” indicator).
To select the timer playback source (CD, TUNER, USB,
iPod, AUDIO IN, LINE IN), press the
or
button.
Press the ENTER button.
When you select the tuner, select a station by pressing
the or button, and then press the ENTER
Daily timer:
Daily timer play works at the same preset time every day
that we set. For example, set the timer as a wake-up call
every morning.
button. If a station has not been programmed, “No
Preset” will be displayed and timer setting will be
cancelled.
(“DAILY” indicator).
6
7
8
9
To adjust the day, press the
press the ENTER button.
or
button and then
Using the once timer and daily timer in combination:
For example, use the once timer to listen a radio
programme, and use the daily timer to wake up.
Press the ENTER button to adjust the hour. Press the
or button and then press the ENTER button.
1 Set the daily timer (pages 18 - 19).
To adjust the minutes, press the
then press the ENTER button.
or
button and
2 Set the once timer (pages 18 - 19).
Set the time to finish as in steps 7 and 8 above.
1 minute or more
10 Adjust the volume using the VOLUME control, and then
press the ENTER button. Do not turn the volume up too
high.
Once timer
Stop
Start
Daily timer
Stop
Start
11 Press the ON/STAND-BY button to enter the power
stand-by mode. The “TIMER” indicator lights up and
the unit is ready for timer playback.
12 When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the
preset volume. The timer indicator will blink during
timer playback.
E-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer and sleep operation (Remote control only) (continued)
■
Sleep operation
13 When the timer end time is reached, the system will
enter the power stand-by mode automatically.
The radio, compact disc, iPod, USB, Audio In and Line In
can all be turned off automatically.
Once timer:
The timer will be cancelled.
1 Play back the desired sound source.
Daily timer:
The timer operates at the same time every selected day.
It will continue until the daily timer setting is cancelled.
Cancel the daily timer when it is not in use.
2 Press the SLEEP button.
3 Within 5 seconds, press the Numeric button to set the
time. (1 minute ~ 99 minutes)
Notes:
4 “SLEEP” will appear.
● When performing timer playback using another unit
connected to the USB terminal or AUDIO IN jack, select
“USB” or “AUDIO IN” or “LINE IN” in step 5.
● This unit will turn on or enter the power stand-by mode
automatically. However, the connected unit will not turn
on or off. To stop the timer playback, follow step
“Cancelling the timer setting” of this page.
5 The unit will enter the power stand-by mode
automatically after the preset time has elapsed. The
volume will be turned down 1 minute before the sleep
operation finishes.
To confirm the remaining sleep time:
Checking the timer setting:
1 Whilst “SLEEP” is indicated, press the SLEEP button.
1 Turn the power on and press and hold down the
CLOCK/TIMER button.
To cancel the sleep operation:
Press the ON/STAND-BY button whilst “SLEEP” is
indicated. To cancel the sleep operation without setting
the unit to the stand-by mode, proceed as follows.
2 Within 10 seconds, press the
or
button to select
“Once” or “Daily”, and press the ENTER button.
3 Within 10 seconds, press the
“Timer Call”, and press the ENTER button.
or button to select
1 Whilst “SLEEP” is indicated, press the SLEEP button.
2 Within 5 seconds, press the “0” button twice until
“SLEEP 00” appears.
Cancelling the timer setting:
1 Turn the power on and press and hold down the
CLOCK/TIMER button.
■
To use timer and sleep operation together
2 Within 10 seconds, press the
“Once” or “Daily”, and press the ENTER button.
or
button to select
Sleep and timer playback:
For example, you can fall asleep listening to the radio and
wake up to CD in the next morning.
3 Within 10 seconds, press the
or button to select
“Timer Off”, and press the ENTER button. Timer will be
cancelled (the setting will not be cancelled).
1 Set the sleep time (see above, steps 1 - 5).
2 Whilst the sleep timer is set, set the timer playback
(steps 2 - 9, page 18).
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To
reuse the same setting, perform the following operations.
Timer playback
setting
End
time
Sleep timer
setting
1 Turn the power on and press and hold down the
CLOCK/TIMER button.
1-99 minutes
Desired time
2 Within 10 seconds, press the
or
button to select
“Once” or “Daily”, and press the ENTER button.
Sleep operation will
automatically stop
Timer playback
start time
3 Within 10 seconds, press the
“Timer On” , and press the ENTER button.
or button to select
4 Press the ON/STAND-BY button to enter the power
stand-by mode.
E-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Enhancing your system
Troubleshooting chart
The connection lead is not included. Purchase
commercially available lead as shown below.
a
Many potential problems can be resolved by the owner
without calling a service technician.
If something is wrong with this product, check the following
before calling your authorised SHARP dealer or service
centre.
■
General
Symptom
Possible cause
● The clock is not set ● Did a power failure occur?
to the correct time.
Reset the clock. (Refer
page 6)
● When a button is
pressed, the unit
does not respond.
● Set the unit to the power
stand-by mode and then
turn it back on.
● If the unit still malfunctions,
reset it. (Refer page 21)
Portableaudio
player, etc.
● No sound is heard.
● Is the volume level set to
“Min”?
Audio cable (not supplied)
● Are the headphones
connected?
● Are the speaker wires
disconnected?
■
Listening to the playback sounds of
portable audio player, etc.
■
CD player
Symptom
1 Use a connection lead to connect the portable audio
player etc. to the AUDIO IN socket. When using video
equipment, connect the audio output to this unit and the
video output to a television.
Possible cause
● Playback does not
start.
● Playback stops in
the middle or is not
● Is the disc loaded upside
down?
● Does the disc satisfy the
standards?
2 Press the ON/STAND-BY button to turn the power on.
3 Press the AUDIO/LINE (INPUT) button on the remote
control or FUNCTION button repeatedly on main unit to
select AUDIO IN function.
performed properly. ● Is the disc distorted or
scratched?
4 Play the connected equipment. If volume level of the
connected device is too high, sound distortion may
occur. Should this happen, lower the volume of the
connected device. If volume level is too low, increase the
volume of the connected device.
● Playback sounds are ● Is the unit located near
skipped, or stopped
in the middle of a
track.
excessive vibrations?
● Is the disc very dirty?
● Has condensation formed
inside the unit?
Note:
To prevent noise interference, place the unit away from the
television.
■
Remote control
Symptom
■
Headphones
Possible cause
● Do not turn the volume on to full at switch on and listen
to music at moderate levels. Excessive sound pressure
from earphones and headphones can cause hearing
loss.
● Before plugging in or unplugging the headphone,
reduce the volume.
● Be sure your headphone has a 3.5 mm (1/8") diameter
plug and impedance between 16 and 50 ohms. The
recommended impedance is 32 ohms.
● Plugging in the headphone disconnects the speakers
automatically. Adjust the volume using the VOLUME
control.
● The remote control
● Is the AC power lead of the
unit plugged in?
does not operate.
● Is the battery polarity
correct?
● Are the batteries dead?
● Is the distance or angle
incorrect?
● Does the remote control
sensor receive strong
light?
■
Tuner
Symptom
Possible cause
● The radio makes
unusual noises
continuously.
● Is the unit placed near the
TV or computer?
● Is the FM aerial placed
properly? Move the aerial
away from the AC power
lead if it is located nearby.
E-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting chart (continued)
If such a problem occurs, do the following:
1 Set the unit to the stand-by mode and turn the power on
again.
2 If the unit is not restored in the previous operation,
unplug and plug in the unit again, and then turn the
power on.
■
USB
Symptom
Possible cause
● Is there any MP3/WMA file
available?
● Is the device properly
connected?
● Is it an MTP device?
● Does the device contain
AAC file only?
● Device cannot be
detected.
Note:
If neither operation above restores the unit, clear all the
memory by resetting it.
● Playback does not ● Is it a copyright protected
■
Factory reset, clearing all memory
start.
WMA file?
● Is it a false MP3 file?
1 Press the ON/STAND-BY button to enter the power
stand-by mode.
● Wrong time display. ● Is Variable Bitrate file being
played back?
● Wrong file name
display.
2 Whilst pressing down the OPEN/CLOSE button, press
● Is the File Name written in
Chinese or Japanese
characters?
the ON/STAND-BY button until “Clear All” appears.
■
iPod, iPhone or iPad
Caution:
This operation will erase all data stored in memory
including clock, timer settings and tuner preset.
Symptom
Possible cause
● The iPod, iPhone or iPad is
not playing.
● The iPod, iPhone or iPad is
not properly connected to
the unit.
● Is the AC power lead of the
unit plugged in?
● No sound is
produced.
No image appears
on the TV/monitor.
■
Before transporting the unit
Remove the iPod, iPhone, iPad, USB memory device and
disc from the unit. Then, set the unit to the power stand-by
mode. Carrying the unit with iPod, iPhone, iPad or USB
memory device left connected or discs left inside might
damage the unit.
● The video cable is not
properly connected.
● The TV/monitor’s input
selection is not properly set.
● The iPod TV out feature has
not been set to output video.
● USB terminal do not support
video.
■
Care of compact discs
Compact discs are fairly resistant to damage, however
mistracking can occur due to an accumulation of dirt on the
disc surface. Follow the guidelines below for maximum
enjoyment from your CD collection and player.
● Do not write on either side of the disc, particularly the
non-label side from which signals are read. Do not
mark this surface.
● Keep your discs away from direct sunlight, heat, and
excessive moisture.
● Always hold the CDs by the edges. Fingerprints, dirt, or
water on the CDs can cause noise or mistracking. If a
CD is dirty or does not play properly, clean it with a soft,
dry cloth, wiping straight out from the centre, along the
radius.
● iPod, iPhone or
iPad will not
charge.
● The iPod, iPhone or iPad is
not making full contact with
the connector.
rd
● Using iPod (3 generation).
● The iPod or iPhone is not
supported. Refer to page 7
for compatible models.
●
“
This accessory is
not made to work
with iPhone or
● The iPhone battery is low.
Please charge the iPhone.
● iPhone is not properly
docked.
”
“This accessory is
not supported by
iPhone” appears on
iPhone screen.
NO
YES
Correct
■
Condensation
Sudden temperature changes, storage or operation in an
extremely humid environment may cause condensation
inside the cabinet (CD pickup, etc.) or on the transmitter on
the remote control. Condensation can cause the unit to
malfunction. If this happens, leave the power on with no
disc in the unit until normal playback is possible (about 1
hour). Wipe off any condensation on the transmitter with a
soft cloth before operating the unit.
Maintenance
■
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted
soap solution, then with a dry cloth.
Caution:
■
If problem occurs
● Do not use chemicals for cleaning (petrol, paint thinner,
etc.). It may damage the cabinet.
● Do not apply oil to the inside of the unit. It may cause
malfunctions.
When this product is subjected to strong external
interference (mechanical shock, excessive static
electricity, abnormal supply voltage due to lightning, etc.)
or if it is operated incorrectly, it may malfunction.
E-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification
changes for product improvement without prior notice. The
performance specification figures indicated are nominal
values of production units. There may be some deviations
from these values in individual units.
■
USB (MP3 / WMA)
USB host interface ● Complies with USB 1.1 (Full
Speed)/2.0 Mass Storage
Class.
● Support Bulk only and CBI
protocol.
■
General
Support file
Bitrate support
Other
● MPEG 1 Layer 3
● WMA (Non DRM)
Power source
AC 220 - 240 V ~ 50/60 Hz
● MP3 (32 ~ 320 kbps)
● WMA (64 ~ 160 kbps)
Power
consumption
Power on: 40 W
Power stand-by: 0.4 W (*)
● Maximum total number of
MP3/WMA files is 65025.
● Maximum total number of
folders is 999 INCLUSIVE of
root directory.
● The ID3TAG information
supported are TITLE, ARTIST
and ALBUM only.
● Supports ID3TAG version 1
and version 2.
Dimensions
Width: 215 mm (8 - 1/2")
Height: 96 mm (3 - 4/5")
Depth: 335 mm (13 - 1/5")
Weight
2.6 kg (5.7 lbs.)
( * ) This power consumption value is obtained when the
demonstration mode is cancelled in the power stand-by
mode. Refer to page 4 to cancel the demonstration mode.
File system
support
● Support USB devices with
Microsoft Windows/DOS/FAT
12/FAT 16/ FAT 32.
■
Amplifier
● 2 kbyte block length for sector.
Output power
PMPO: 200 W
MPO: 100 W (50 W + 50 W)
(10% T.H.D.)
■
Tuner
RMS: 100 W (50 W + 50 W)
(10% T.H.D.)
RMS: 66 W (33 W + 33 W)
(1% T.H.D.)
Frequency range
Preset
FM: 87.5 - 108 MHz
40 (FM station)
Output terminals Speakers: 4 ohms
20Hz - 20kHz
Subwoofer Pre-out (audio signal):
■
Speaker (XL-HF201PH)
200 mV/10 k ohms at 70 Hz
Video output: 1 Vp-p
Type
2-way type speaker system
2.5 cm (1") Dome-Tweeter
12 cm (4-3/4") woofer
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Input terminals
Audio In (audio signal):
500 mV/47 k ohms
Line in (Analogue input):
500 mV/47 k ohms
Maximum input
power
100 W
Rated input power 50 W
Impedance
Dimensions
4 ohms
■
CD player
Width: 148 mm (5-13/16")
Height: 262 mm (10-5/16")
Depth: 203.5 mm (8")
Type
Single disc multi-play compact disc
player
Weight
2.5 kg (5.4 lbs.)/each
Signal readout
D/A converter
Non-contact, 3-beam
semiconductor laser pickup
■
Speaker (XL-HF301PH)
Multi bit D/A converter
20 - 20,000 Hz
Frequency
response
Type
2-way type speaker system
2.5 cm (1") Dome-Tweeter
13 cm (5-1/8") woofer
Dynamic range
90 dB (1 kHz)
Maximum input
power
100 W
Rated input power 50 W
Impedance
Dimensions
4 ohms
Width: 160 mm (6-5/16")
Height: 280 mm (11-1/16")
Depth: 289 mm (11-3/8")
Weight
4.2 kg (9.3 lbs.)/each
E-22
Download from Www.Somanuals.com. All Manuals Search And Download.
|