MULTIMEDIA PROJECTOR
MODEL
XR-1X
XR-1S
OPERATION MANUAL
(The picture shown above is of the XR-1S.)
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
The supplied CD-ROM contains operation instructions in English, German, French,
Swedish, Spanish, Italian, Dutch, Portuguese, Chinese (Traditional Chinese and Simpli-
fied Chinese) and Korean. Carefully read through the operation instructions before
operating the projector.
Die mitgelieferte CD-ROM enthält Bedienungsanleitungen in Englisch, Deutsch, Französisch,
Schwedisch, Spanisch, Italienisch, Niederländisch, Portugiesisch, Chinesisch (Traditionelles
Chinesisch und einfaches Chinesisch) und Koreanisch. Bitte lesen Sie die
Bedienungsanleitung vor der Verwendung des Projektors sorgfältig durch.
Le CD-ROM fourni contient les instructions de fonctionnement en anglais, allemand,
français, suédois, espagnol, italien, néerlandais, portugais, chinois (chinois traditionnel et
chinois simplifié) et coréen. Veuillez lire attentivement ces instructions avant de faire
fonctionner le projecteur.
Den medföljande CD-ROM-skivan innehåller bruksanvisningar på engelska, tyska,
franska, svenska, spanska, italienska, holländska, portugisiska, kinesiska (traditionell
kinesiska och förenklad kinesiska) och koreanska. Läs noga igenom bruksanvisningen
innan projektorn tas i bruk.
El CD-ROM suministrado contiene instrucciones de operación en inglés, alemán,
francés, sueco, español, italiano, holandés, portugués, chino (chino tradicional y chino
simplificado) y coreano. Lea cuidadosamente las instrucciones de operación antes de
utilizar el proyector.
Il CD-ROM in dotazione contiene istruzioni per l’uso in inglese, tedesco, francese,
svedese, spagnolo, italiano, olandese, portoghese, cinese (cinese tradizionale e cinese
semplificato) e coreano. Leggere attentamente le istruzioni per l’uso prima di usare il
proiettore.
De meegeleverde CD-ROM bevat handleidingen in het Engels, Duits, Frans, Zweeds,
Spaans, Italiaans, Nederlands, Portugees, Chinees (Traditioneel Chinees en
Vereenvoudigd Chinees) en Koreaans. Lees de handleiding zorgvuldig door voor u de
projector in gebruik neemt.
O CD-ROM fornecido contém instruções de operação em Inglês, Alemão, Francês,
Sueco, Espanhol, Italiano, Holandês, Português, Chinês, (Chinês Tradicional e Chinês
Simplificado) e Coreano. Leia cuidadosamente todas as instruções de operação antes
de operar o projetor.
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using the projector, please read this operation manual carefully.
Introduction
ENGLISH
There are two important reasons for prompt warranty registration of your new SHARP
Projector, using the REGISTRATION CARD packed with the projector.
1. WARRANTY
This is to assure that you immediately receive the full benefit of the parts, service
and labor warranty applicable to your purchase.
2. CONSUMER PRODUCT SAFETY ACT
To ensure that you will promptly receive any safety notification of inspection,
modification, or recall that SHARP may be required to give under the 1972
Consumer Product Safety Act, PLEASE READ CAREFULLY THE IMPORTANT
“LIMITED WARRANTY” CLAUSE.
U.S.A. ONLY
WARNING: High brightness light source. Do not stare into the beam of light, or view
directly. Be especially careful that children do not stare directly into the
beam of light.
WARNING: To reduce the risk of fire or electric shock, do not expose
this product to rain or moisture.
See bottom of projector.
The lightning flash with arrowhead sym-
bol, within an equilateral triangle, is in-
tended to alert the user to the presence
of uninsulated “dangerous voltage”
within the product’s enclosure that may
be of sufficient magnitude to constitute
a risk or electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT REMOVE SCREWS
EXCEPT SPECIFIED USER
SERVICE SCREW.
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER.
NO USER-SERVICEABLE PARTS EXCEPT LAMP UNIT.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The exclamation point within a triangle
is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in
the literature accompanying the product.
WARNING: FCC Regulations state that any unauthorized changes or modifications to
this equipment not expressly approved by the manufacturer could void
the user’s authority to operate this equipment.
U.S.A. ONLY
INFORMATION
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the operation manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference, in which case the user will be required to correct the
interference at his own expense.
U.S.A. ONLY
1
Download from Www.Somanuals.com. All Manuals Search And Download.
The enclosed computer cable must be used with the device. The cable is provided to
ensure that the device complies with FCC Class A verification.
U.S.A. ONLY
WARNING:
This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
WARNING:
The cooling fan in this projector continues to run for about 90 seconds after the projector enters
standby mode. During normal operation, when putting the projector into standby mode always
use the ON/STANDBY button on the projector or on the remote control. Ensure the cooling fan has
stopped before disconnecting the power cord.
DURING NORMAL OPERATION, NEVER TURN THE PROJECTOR OFF BY DISCONNECTING
THE POWER CORD. FAILURE TO OBSERVE THIS WILL RESULT IN PREMATURE LAMP FAILURE.
PRODUCT DISPOSAL
This projector utilizes tin-lead solder, and a pressurized lamp containing a small amount of
mercury. Disposal of these materials may be regulated due to environmental considerations.
For disposal or recycling information, please contact your local authorities or, if you are
CAUTION ON LITHIUM BATTERY (for Remote Control unit)
If a battery is reversed (positive end where the negative end belongs and vice versa), it can
overheat and rupture. This has happened when young children install batteries backwards.
Warn children not to take out batteries or install them. Parents should install the lithium
battery in the remote control.
Caution Concerning Lamp Replacement
See “Replacing the Lamp” on page 55.
LAMP REPLACEMENT WARNING
BEFORE REMOVING THE SCREW, DISCONNECT POWER
CORD. HOT SURFACE INSIDE. ALLOW 1 HOUR TO COOL
BEFORE REPLACING THE LAMP. REPLACE WITH SAME
SHARP LAMP UNIT MODEL AN-XR1LP ONLY.
UV RADIATION : CAN CAUSE EYE DAMAGE. TURN OFF
LAMP BEFORE SERVICING.
HIGH PRESSURE LAMP : RISK OF EXPLOSION. POTENTIAL
HAZARD OF GLASS PARTICLES IF LAMP HAS RUPTURED.
HANDLE WITH CARE. SEE OPERATION MANUAL.
AVERTISSEMENT A OBSERVER LORS
DU REMPLACEMENT DE LA LAMPE.
DEBRANCHER LE CORDON D’ALIMENTATION AVANT DE
RETIRER LES VIS. L’INTERIEUR DU BOITIER ETANT
EXTREMEMENT CHAUD, ATTENDRE 1 HEURE AVANT DE
PROCEDER AU REMPLACEMENT DE LA LAMPE.
NE REMPLACER QUE PAR UNE LAMPE SHARP DE MODÈLE
AN-XR1LP.
RAYONS ULTRAVIOLETS : PEUVENT ENDOMMAGER LES
YEUX. ETEINDRE LA LAMPE AVANT DE PROCEDER
A L’ENTRETIEN.
LAMPE A HAUTE PRESSION : RISQUE D’EXPLOSION.
DANGER POTENTIEL DE PARTICULES DE VERRE EN CAS
D’ECLATEMENT DE LA LAMPE. A MANIPULER AVEC
PRECAUTION, SE REPORTER AU MODE D’EMPLOI.
This SHARP projector uses a DMD panel. This very sophisticated panel contains 786,432 (XR-
1X) / 480,000 (XR-1S) pixels micromirrors. As with any high technology electronic equipment
such as large screen TVs, video systems and video cameras, there are certain acceptable
tolerances that the equipment must conform to.
This unit has some inactive pixels within acceptable tolerances which may result in inactive dots
on the picture screen. This will not affect the picture quality or the life expectancy of the unit.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Read this Operation Manual
■ The specifications of the XR-1X are slightly different from those of the XR-1S, however, you can
connect and operate both models in the same manner. This operation manual uses the XR-1S
for the purpose of explanation.
•
In this operation manual, the illustration and the screen display are simplified for explanation, and
may differ slightly from actual display.
Using the Menu Screen
The menu can be operated to achieve two functions, adjustment and setting. (For setting the menu
items, see pages 38 and 39.)
Operating with the projector
When “PRJ - ADJ” - “Guide LEDs” is set to “On”, the buttons used for menu adjustment on the
projector light up.
Example: When W, Y and the MENU/HELP button light up on the projector, you can use those
buttons for operation.
Adjustment buttons (W/Y/V/X)
MENU/HELP button
ENTER button
MENU/HELP
button
MOUSE Adjustment
button (P/R/O/Q)
Buttons used in
this operation
ENTER button
RETURN button
Menu Selections (Adjustments)
Button used in
this step
Example: Adjusting “Bright”.
• This operation can also be performed by using the buttons on the projector.
Example: “Picture” screen menu for INPUT 1
Press BMENU.
1
2
(RGB) mode
• The “Picture” menu screen for the se-
lected input mode is displayed.
Menu item
Picture
SCR - ADJ
PRJ - ADJ
Standard
Help
Press Q or O to display the other
menu screen.
Picture Mode
Contrast
Bright
0
0
0
0
• The selected menu item is highlighted.
Red
On-screen
display
Blue
CLR Temp
Bright Boost
sRGB
7 5 0 0 K
Off
Off
Reset
SEL./ADJ.
ENTER
END
36
Info
........Indicates safeguards for using the projector.
.........Indicates additional information for setting up and operating the
projector.
Note
For Future Reference
Maintenance
Troubleshooting
Index
P. 52
PP. 60 and 61
P. 65
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Preparing
Introduction
Setup
How to Read this Operation Manual .... 3
Contents ............................................... 4
IMPORTANT SAFEGUARDS ............... 6
How to Access the PDF Operation
Manuals ............................................ 10
Accessories ........................................ 11
Part Names and Functions ................. 12
Inserting the Lithium Battery ................ 14
Usable Range ...................................... 15
Setting up the Projector ...................... 18
Setting up the Projector ....................... 18
Standard Setup (Front Projection) ....... 18
Projecting a Reversed Image .............. 18
Screen Size and Projection Distance
(XR-1X) ............................................... 19
Screen Size and Projection Distance
(XR-1S) ............................................... 20
Connections
Quick Start
Connections ........................................ 21
Samples of Cables for Connection .... 22
Connecting to a Computer ................. 23
Connecting to Video Equipment......... 24
Connecting the Power Cord ............... 25
Quick Start .......................................... 16
Using
Picture Adjustment (“Picture” menu) .. 40
Selecting the Picture mode.................. 40
Adjusting the Image ............................. 40
Adjusting the Color Temperature ......... 41
Emphasizing the Contrast .................... 41
Progressive........................................... 42
sRGB Setting ........................................ 42
Adjusting the Projected Image
(“SCR - ADJ” menu) ......................... 43
Setting the Resize Mode ...................... 43
Adjusting the Image Position ............... 43
Keystone Correction ............................ 44
Setting On-screen Display ................... 44
Selecting the Background Image ........ 45
Setting the Setup Guide ....................... 45
Reversing/Inverting Projected
Basic Operation
Turning the Projector On/Off .............. 26
Turning the Projector on ....................... 26
Turning the Power off (Putting the
Projector into Standby Mode) ........... 26
Image Projection................................. 27
About the Setup Guide ........................ 27
Adjusting the Projected Image ............ 27
Switching the Input Mode .................... 29
Adjusting the Volume ........................... 29
Displaying the Black Screen and Turning
off the Sound Temporarily ................. 29
Resize Mode......................................... 30
Useful Features
Images ............................................... 46
Selecting the On-screen Display
Language........................................... 46
Setting the Projector Function
Adjusting/Operating with the
Remote Control ................................ 32
Auto Sync (Auto Sync Adjustment) ..... 32
Freezing a Moving Image .................... 32
Selecting the Picture Mode .................. 32
Using Mouse Function ......................... 33
Menu Items ......................................... 34
Using the Menu Screen ...................... 36
Menu Selections (Adjustments) ........... 36
Menu Selections (Settings) .................. 38
(“PRJ - ADJ” menu) .......................... 47
Eco/Quiet Mode ................................... 47
Auto Search Function ........................... 47
Auto Power Off Function ...................... 48
Setting the Guide LEDs........................ 48
System Lock Function .......................... 49
Setting/Changing the keycode ............ 49
Setting the Confirmation Sound ........... 50
Checking the Lamp Life Status ........... 50
Troubleshooting with “Help” menu ..... 51
Displaying “Help” menu screen .......... 51
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Appendix
Connecting Pin Assignments ............. 58
Computer Compatibility Chart ............ 59
Troubleshooting .................................. 60
For SHARP Assistance....................... 62
Specifications ..................................... 63
Dimensions ......................................... 64
Index ................................................... 65
Maintenance ....................................... 52
Maintenance Indicators ...................... 53
Regarding the Lamp ........................... 55
Lamp..................................................... 55
Caution Concerning the Lamp ............ 55
Replacing the Lamp ............................. 55
Removing and Installing
the Lamp Unit .................................... 56
Resetting the Lamp Timer .................... 57
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFEGUARDS
CAUTION: Please read all of these instructions before you operate this product
and save these instructions for later use.
Electrical energy can perform many useful functions. This product has been engineered
and manufactured to assure your personal safety. BUT IMPROPER USE CAN RESULT IN
POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARDS. In order not to defeat the
safeguards incorporated in this product, observe the following basic rules for its installation,
use and servicing.
1. Read Instructions
10. Ventilation
Slots and openings in the cabinet are provided
All the safety and operating instructions should
be read before the product is operated.
for ventilation to ensure reliable operation of the
product and to protect it from overheating, and
these openings must not be blocked or covered.
The openings should never be blocked by placing
the product on a bed, sofa, rug, or other similar
surface. This product should not be placed in a
built-in installation such as a bookcase or rack
unless proper ventilation is provided or the
manufacturer’s instructions have been adhered
to.
2. Retain Instructions
The safety and operating instructions should be
retained for future reference.
3. Heed Warnings
All warnings on the product and in the operating
instructions should be adhered to.
4. Follow Instructions
All operating and use instructions should be
followed.
11. Power Sources
5. Cleaning
This product should be operated only from the
type of power source indicated on the marking
label. If you are not sure of the type of power
supply to your home, consult your product dealer
or local power company. For products intended
to operate from battery power, or other sources,
refer to the operating instructions.
Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
6. Attachments
Do not use attachments not recommended by the
product manufacturer as they may cause hazards.
12. Grounding or Polarization
This product is provided with one of the following
types of plugs. If the plug should fail to fit into the
power outlet,
7. Water and Moisture
Do not use this product near water–for example,
near a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a
swimming pool; and the like.
please contact your electrician.
Do not defeat the safety purpose of the plug.
a. Two-wire type (mains) plug.
8. Accessories
Do not place this product on an unstable cart,
stand, tripod, bracket, or table. The product may
fall, causing serious injury to a child or adult, and
serious damage to the product. Use only with a
cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with
the product. Any mounting of the product should
follow the manufacturer’s instructions, and should
use a mounting accessory recommended by the
manufacturer.
b. Three-wire grounding type (mains) plug with
a grounding terminal.
This plug will only fit into a grounding type
power outlet.
13. Power-Cord Protection
Power-supply cords should be routed so that they
are not likely to be walked on or pinched by items
placed upon or against them, paying particular
attention to cords at plugs, convenience
receptacles, and the point where they exit from
the product.
9. Transportation
A
product and cart
14. Lightning
combination should be
moved with care. Quick
stops, excessive force,
and uneven surfaces may
cause the product and cart
combination to overturn.
For added protection for this product during a
lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from
the wall outlet and disconnect the cable system.
This will prevent damage to the product due to
lightning and power-line surges.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
15. Overloading
19. Replacement Parts
Do not overload wall outlets, extension cords, or
integral convenience receptacles as this can
result in a risk of fire or electric shock.
When replacement parts are required, be sure
the service technician has used replacement
parts specified by the manufacturer or have the
same characteristics as the original part.
Unauthorized substitutions may result in fire,
electric shock, or other hazards.
16. Object and Liquid Entry
Never push objects of any kind into this product
through openings as they may touch dangerous
voltage points or short-out parts that could result
in a fire or electric shock. Never spill liquid of any
kind on the product.
20. Safety Check
Upon completion of any service or repairs to this
product, ask the service technician to perform
safety checks to determine that the product is in
proper operating condition.
17. Servicing
Do not attempt to service this product yourself as
opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
21. Heat
This product should be situated away from heat
sources such as radiators, heat registers, stoves,
or other products (including amplifiers) that
produce heat.
18. Damage Requiring Service
Unplug this product from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
a. When the power-supply cord or plug is
damaged.
b. If liquid has been spilled, or objects have fallen
into the product.
c. If the product has been exposed to rain or
water.
d. If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the
operating instructions, as an improper
adjustment of other controls may result in
damage and will often require extensive work
by a qualified technician to restore the product
to normal operation.
e. If the product has been dropped or damaged
in any way.
f. When the product exhibits a distinct change
in performance, this indicates a need for
service.
• DLP\ (Digital Light Processing) and DMD\ (Digital Micromirror Device) are trademarks
of Texas Instruments, Inc.
• Microsoft and Windows are registered trademarks of Microsoft Corporation in the United
States and/or other countries.
• PC/AT is a registered trademark of International Business Machines Corporation in the
United States.
• Adobe Reader is a trademark of Adobe Systems Incorporated.
• Macintosh is a registered trademark of Apple Computer, Inc. in the United States and/or
other countries.
• All other company or product names are trademarks or registered trademarks of their
respective companies.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Be sure to read the following safeguards when setting
up your projector.
Warning about placing the projector in
a high position
■ When placing the projector in a high position,
be sure to secure it carefully to avoid per-
sonal injury caused by the projector falling
down.
Caution concerning the lamp unit
■ Potential hazard of glass par-
ticles if lamp ruptures.In case
of lamp rupture, contact your
nearest Sharp Authorized
Projector Dealer or Service
Center for a replacement.
See “Replacing the Lamp” on
page 55.
Do not subject the projector to hard im-
pact and/or vibration.
■ Take care with the lens so as not to hit or
AN-XR1LP
damage the surface of the lens.
Caution concerning the setup of the pro-
Rest your eyes occasionally.
■ Continuously watching the screen for long
hours will cause eye strain. Be sure to occa-
sionally rest your eyes.
jector
■ For minimal servicing and to maintain high
image quality, SHARP recommends that this
projector be installed in an area free from
humidity, dust and cigarette smoke.When the
projector is subjected to these environments,
the vents and lens must be cleaned more of-
ten. As long as the projector is regularly
cleaned, use in these environments will not
reduce the overall operation life of the unit.
Internal cleaning should only be performed
by a Sharp Authorized Projector Dealer or
Service Center.
Avoid locations with extremes of tem-
perature.
■ The operating temperature of the projector is
from 41°F to 95°F (+5°C to +35°C).
■ The storage temperature of the projector is
from –4°F to 140°F (–20°C to +60°C).
Do not block the exhaust and intake
vents.
■ Allow at least 11 13/16 inches (30 cm) of space
between the exhaust vent and the nearest
wall or obstruction.
Do not set up the projector in places ex-
posed to direct sunlight or bright light.
■ Position the screen so that it is not in direct
sunlight or room light. Light falling directly on
the screen washes out the colors, making
viewing difficult. Close the curtains and dim
the lights when setting up the screen in a
sunny or bright room.
■ Be sure that the intake vent and the exhaust
vent are not obstructed.
■ If the cooling fan becomes obstructed, a pro-
tection circuit will automatically put the pro-
jector into standby mode to prevent overheat
damage. This does not indicate a malfunc-
tion. (See pages 53 and 54.) Remove the pro-
jector power cord from the wall outlet and wait
at least 10 minutes. Place the projector where
the intake and exhaust vents are not blocked,
plug the power cord back in and turn on the
projector. This will return the projector to the
normal operating condition.
Caution regarding placing of the projec-
tor.
■ Place the projector on a level site within the
adjustment range of the adjustment foot.
■ When turning off the projector, the cooling fan
runs to decrease the internal temperature for
a while. Unplug the power cord after the cool-
ing fan stops.The period the cooling fan runs
will vary, depending on the circumstances and
the internal temperature.
Do not turn the projector upside down
immediately after putting into standby
mode.
■ This may cause burns due to rise in tempera-
ture of the lamp unit cover.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution regarding transportation of the
projector
Info
•
•
The cooling fan regulates the internal tem-
perature, and its performance is automatically
controlled. The sound of the fan may change
during projector operation due to changes in
the fan speed.This does not indicate malfunc-
tion.
Do not unplug the power cord during projec-
tion or cooling fan operation. This can cause
damage due to rise in internal temperature,
as the cooling fan also stops.
■ When transporting the projector, be sure not
to subject it to hard impact and/or vibration,
as this can result in damage. Take extra care
with the lens. Before moving the projector,
be sure to unplug the power cord from the
wall outlet, and disconnect any other cables
connected to it.
■ Do not carry the projector by holding the lens.
■ When transporting the projector, be sure to
place the projector in the supplied soft case.
(See page 11.)
Other connected equipment
■ When connecting a computer or other audio-
visual equipment to the projector, make the
connections AFTER unplugging the power
cord of the projector from the AC outlet and
turning off the equipment to be connected.
■ Please read the operation manuals of the pro-
jector and the equipment to be connected for
instructions on how to make the connections.
Using the projector in other countries
■ The power supply voltage and the shape of
the plug may vary depending on the region
or country you are using the projector in.
When using the projector overseas, be sure
to use an appropriate power cord for the coun-
try you are in.
Temperature monitor function
■
If the projector starts to overheat due to setup
problems or blockage of the air vents, “ ” and
” will illuminate in the lower left corner
“
of the picture. If the temperature continues to
rise, the lamp will turn off, the temperature warn-
ing indicator on the projector will blink, and af-
ter a 90-second cooling-off period the projector
will enter standby mode. Refer to “Maintenance
Indicators” on page 53 for details.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Access the PDF Operation Manuals
PDF operation manuals in several languages are included in the CD-ROM,
so that you can work with the projector, even if you do not have this manual.
To utilize these manuals, you need to install Adobe Reader on your com-
puter (Windows or Macintosh).
Please download Adobe Reader from the Internet (http://www.adobe.com).
Accessing the PDF Manuals
For Windows:
For Macintosh:
1 Insert the CD-ROM in the CD-ROM
drive.
1 Insert the CD-ROM in the CD-ROM
drive.
2 Double click the “My Computer” icon.
3 Double click the “CD-ROM” drive.
4 Double click the language (name of the
folder) that you want to view.
5 Double click the “XR1” pdf file to access
the projector manuals.
2 Double click the “CD-ROM” icon.
3 Double click the language (name of the
folder) that you want to view.
4 Double click the “XR1” pdf file to access
the projector manuals.
Note
• If the desired pdf file cannot be opened by double clicking the mouse, start Adobe
Reader first, then specify the desired file using the “File”, “Open” menu.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
Supplied accessories
Cable tieK2
Lithium battery
UBNDTA015WJZZ
(CR2025)
RGB/USB cable
(6' (1.8 m))
QCNWGA047WJPZ
UBATL0011TAZZ
• For the RGB/USB
cable
• For the power cord
Remote control
RRMCGA256WJSA
• Projector manual CD-ROM
UDSKAA045WJN1
• Operation manual (this manual)
Soft case
GCASNA011WJZZ
Power cord*
(1)
(2)
(3)
(4)
For U.S., Canada,
etc.
For Europe, except
U.K.
For U.K., Hong Kong
and Singapore
For Australia, New
Zealand and Oceania
(6' (1.8 m))
(6' (1.8 m))
(6' (1.8 m))
(6' (1.8 m))
QACCDA029WJPZ
QACCVA006WJPZ
QACCBA015WJPZ
QACCLA024WJPZ
* Use the power cord that corresponds to the wall outlet in your country.
Optional accessories
■ 3 RCA to 15-pin D-sub cable (9n10o (3.0 m))
■ Lamp unit
AN-C3CP
AN-XR1LP
Note
• Some of the optional accessories may not be available depending on the region. Please check with
your nearest Sharp Authorized Projector Dealer or Service Center.
Tying the Cables
Tie the cable using the supplied
cable ties.
Carrying the Projector
Using the Soft Case
Power cord
RGB/USB cable
Info
• Be sure the projector has cooled down sufficiently before
placing it in the case.
• This soft case is only for storing and carrying the projector.
• Shipping the projector in the soft case as a parcel may cause
damage to the projector. If you send the projector in the carry-
ing case as a parcel, be sure to place it in a sturdy case and
with enough shock absorbing material to avoid any damage.
Note
• You cannot store the supplied
cables within the soft case. When
transporting the projector, pre-
pare a bag for these cables.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names and Functions
Numbers in Z refer to the main pages in this operation manual where the topic
is explained.
Projector
Top View
Setup Guide indicators
27
54
Lamp indicator
54
Temperature warning
indicator
Volume buttons (V/X)
For adjusting the
29
ON/STANDBY button
For turning the power
on and putting the
projector into standby
mode.
26
54
speaker sound level.
MENU/HELP button
For displaying
adjustment and
setting screens, and
help screen.
36
51
ENTER button
36
36
For setting items
selected or adjusted
on the menu.
Adjustment buttons
(W/Y/V/X)
INPUT button (W/Y)
For switching input mode
1, 2 or 3.
29
For selecting menu
items.
Front View
HEIGHT ADJUST
button
Focus ring
For adjusting the
focus.
28
28
27
15
Zoom knob
For enlarging/
reducing the
picture.
Remote control sensor
Indicators on the Projector
ON/STANDBY button
Red on
Normal (Standby)
Green on
Red blinks
Green on
Green blinks
Red on
Normal (Power on)
Abnormal (See page 54.)
Normal
Lamp indicator
The lamp is warming up or shutting down.
The lamp is shut down abnormally or
requires to be changed. (See page 54.)
Temperature warning
indicator
Off
Normal
Red on
The internal temperature is abnormally
high. (See page 54.)
Orange blinks
Orange blinks
“1 FOCUS” or “3 ZOOM” is highlighted on
FOCUS/ZOOM
indicator
HEIGHT ADJUST
indicator
the Setup Guide. (See page 27.)
“2 HEIGHT ADJUST” is highlighted on the
Setup Guide. (See page 27.)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Numbers in Z refer to the main pages in this operation manual where the topic
is explained.
Side View
Refer to “INPUT Terminals and Connectable Main Equipment” on page 21.
Terminals
INPUT 2 terminal
24
Terminal for connect-
ing video equipment
with an S-video
terminal.
INPUT 1 terminal
Terminal for computer
RGB and component
signals.
23
33
INPUT 3 terminal
Terminal for connect-
ing video equipment.
25
USB terminal
Terminal connecting
with the USB
terminal on the
AUDIO INPUT
terminal
23
24
computer for using
the supplied remote
control as the
25
computer mouse.
AC socket
Connect the
supplied Power
cord.
25
Exhaust vent
52
28
Kensington
Security
Standard
connector
Rear adjust-
ment foot
Intake vent
52
15
Remote control
sensor
Using the Kensington Lock
• This projector has a Kensington Security Standard connector for use with a Kensington
MicroSaver Security System. Refer to the information that came with the system for
instructions on how to use it to secure the projector.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names and Functions (Continued)
Numbers in Z refer to the main pages in this operation manual where the topic is explained.
ON/STANDBY button
For turning the power
on and putting the
projector into standby
mode.
MENU/HELP button
For displaying adjustment
and setting screens, and
help screen.
36
51
26
MOUSE/Adjustment
buttons (P/R/O/Q)
33
36
INPUT 1, 2, and 3
buttons
For switching to the
respective input
modes.
29
32
•
For moving the computer
cursor when connecting
the projector USB terminal
to the computer with RGB/
USB cable.
AUTO SYNC button
For automatically
adjusting images when
connected to a com-
puter.
•
For selecting menu items.
L CLICK/ENTER button
33
36
•
For the Left click when
connecting the projector
USB terminal to the
computer with RGB/USB
cable.
RESIZE button
30
32
29
For switching the
screen size (NORMAL,
BORDER, etc.).
•
For setting items selected
or adjusted on the menu.
PICTURE MODE
buttons
For switching the
picture mode.
R CLICK/RETURN button
33
36
•
For the Right click when
connecting the projector
USB terminal to the
computer with RGB/USB
cable.
Volume buttons
For adjusting the
speaker sound level.
•
For undoing an operation
or returning to the previous
display.
Note
• All the buttons on the remote control, except
the MOUSE/Adjustment button, are made of
luminous rubber, that is visible in the dark. (The
luminous light weakens over time.)
FREEZE button
For freezing images.
32
29
AV MUTE button
For temporarily display-
ing the black screen and
turning off the sound.
Inserting the Lithium Battery
While pressing the tab (1), pull the battery holder
(2).
1
Pull the battery holder.
2
3
+ mark
Insert the supplied lithium battery (CR2025).
• Insert the lithium battery with the + side of the battery facing the
+ mark of the battery holder.
Insert the battery holder into the remote control.
4
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Usable Range
The remote control can be used to control the
projector within the ranges shown in the illustra-
tion.
Front view
30°
Remote control sensor
Note
• The signal from the remote control can be re-
flected off a screen for easy operation. How-
ever, the effective distance of the signal may
differ depending on the screen material.
30°
Remote
control signal
transmitters
When using the remote control
13n (4 m)
•
Be sure not to drop, expose to moisture or
high temperature.
30°
•
The remote control may malfunction under a
fluorescent lamp. In this case, move the pro-
jector away from the fluorescent lamp.
Remote control
Rear view
30°
Remote control sensor
30°
Remote control
signal
transmitters
13n (4 m)
30°
Notes the Use of the Lithium Battery
CAUTION The battery used in this device may present a risk of fire of chemical burn if mis-
treated. Do not recharge, disassemble, heat above 212°F (100°C) , or incinerate. Replace bat-
tery with the type CR2025 only. Use of another battery may present a risk of fire or explosion.
Dispose of used battery promptly. Keep away from children. Do not disassemble and do not
dispose of in fire.
•
•
•
See page 2 for caution on the lithium battery.
Do not short-circuit, recharge, disassemble, or heat the lithium battery.
Should the lithium battery leak, wipe the battery compartment clean, and then insert a new
battery.
Replacement of lithium battery
•
•
Replace with a new battery (CR2025) if remote control operation often fails.
When disposing the battery, follow the recycling or disposal regulations in your community.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start
This section shows the basic operation (projector connecting with the computer). For details, see
the page described below for each step.
Setup and Projection
In this section, connection of the projector and the computer is explained using one example.
INPUT button
3
6
5
4
ON/STANDBY
button
ENTER button
3
6
ON/STANDBY
button
5 INPUT 1 button
HEIGHT
4
4
ADJUST button
ENTER button
4
Zoom knob
Focus ring
4
1. Place the projector facing a wall or a screen
_P. 18
2. Connect the projector to the computer and plug the power cord
into the AC socket of the projector
When connecting equipment other than the computer, see
pages 24 and 25.
_PP. 21–25
3. Press the ON/STANDBY button to turn the projector on
On the projector On the remote control
_P. 26
16
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Adjust the projected image with the Setup Guide
1 After the projector turns on, the Setup
Guide appears. (When “Setup Guide” is set
to “On”. n page 45)
3 Angle (See page 28.)
• Adjust the projector angle using the
HEIGHT ADJUST button.
HEIGHT ADJUST
button
4 Zoom (See page 28.)
• Adjust the projected image size using the
zoom knob.
• Refer to the Setup Guide screen to adjust
the focus, angle and zoom.
• Press TENTER to finish the Setup Guide.
zoom
in
Zoom knob
2 Focus (See page 27.)
• Bring the projected
image into focus
zoom
out
using the focus ring.
5 After adjusting the focus, height and screen
size, press TENTER to finish the Setup
Guide.
Focus ring
_P. 27
5. Select the INPUT mode
Select the “INPUT 1” using the INPUT button on the projector or C INPUT 1 on the remote
control.
On the On the remote On-screen display (RGB)
projector
control
• When pressing the INPUT button on the projector, input mode switches in order of
INPUT1 INPUT2 INPUT3
.
• When using the remote control, press the CINPUT 1/DINPUT 2/EINPUT 3 button to
switch the INPUT mode.
_P. 29
6.Turn the Power off
Press the ON/STANDBY button, then press that button again while the confirmation message is
displayed, to put the projector into standby mode.
On-screen Display
On the
projector
On the remote
control
• While the cooling fan is running, the Adjustment buttons blinks. (When
“Guide LEDs” is set to “On”. n page 48)
• Unplug the power cord from the AC outlet after the cooling fan stops.
_P. 26
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the Projector
Setting up the Projector
Position the projector perpendicular to the screen with the projector’s feet flat and level to achieve
an optimal image.
Note
• For an optimal image, position the screen so that it is not in direct sunlight or room light. Light falling
directly on the screen washes out the colors, making viewing difficult. Close the curtains and dim
the lights when setting up the screen in a sunny or bright room.
Standard Setup (Front Projection)
■ Place the projector at the required distance from the screen according
to the desired picture size. (See page 19.)
Example of standard setup
Side View
Screen
H
Lens center
L
Projecting a Reversed Im-
age
Projection from behind the
Screen
■ Place a translucent screen between the pro-
Translucent screen
jector and the audience.
■ Reverse the image by setting “Rear” in the
Audience
“PRJ Mode” menu. (See page 46.)
Set to “Front”
Set to “Rear”
Mirror
Projection Using a Mirror
■ Place a mirror (normal flat type) in front of
the lens.
Translucent
screen
■ When the translucent screen is placed be-
tween the mirror and audience, set to “Front”
in the “PRJ Mode” menu. (See page 46.)
■ When the mirror is placed on the audience
side, set to “Rear” in the “PRJ Mode” menu.
(See page 46.)
Audience
Mirror
Audience
Info
• When using a mirror, be sure to carefully posi-
tion both the projector and the mirror so the
light does not shine into the eyes of the audi-
ence.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen Size and Projection Distance (XR-1X)
NORMAL Mode (4:3)
Picture (Screen) size
Width
Projection distance [L]
Distance from the bottom of the
image to the lens center [H]
χ
Diag. [ ]
Height
Minimum [L1]
Maximum [L2]
270Љ (686 cm) 549 cm (216Љ) 411 cm (162Љ) 9.9 m (32Ј 5Љ)
250Љ (635 cm) 508 cm (200Љ) 381 cm (150Љ) 9.1 m (30Ј 0Љ)
200Љ (508 cm) 406 cm (160Љ) 305 cm (120Љ) 7.3 m (24Ј 0Љ)
150Љ (381 cm) 305 cm (120Љ) 229 cm (90Љ) 5.5 m (18Ј 0Љ)
מ 50.9 cm (מ 20 3/64Љ) מ 47.1 cm (מ 18 9/16Љ) 8.5 m(28Ј 0Љ)
מ 37.7 cm (מ 14 27/32Љ) 6.4 m(21Ј 0Љ)
מ 28.3 cm (מ 11 9/64Љ) 4.3 m(14Ј 0Љ)
מ 18.9 cm (מ 7 27/64Љ) 3.6 m(11Ј 9Љ)
מ 15.8 cm (מ 6 15/64Љ) 3.1 m(10Ј 1Љ)
מ 13.6 cm (מ 5 11/32Љ) 2.6 m (8Ј 5Љ)
מ 11.3 cm (מ 4 29/64Љ) 100Љ (254 cm) 203 cm (80Љ)
84Љ (213 cm) 171 cm (67Љ)
72Љ (183 cm) 146 cm (58Љ)
60Љ (152 cm) 122 cm (48Љ)
40Љ (102 cm) 81 cm (32Љ)
30Љ (76 cm) 61 cm (24Љ)
152 cm (60Љ) 3.7 m (12Ј 0Љ)
128 cm (50Љ) 3.1 m (10Ј 1Љ)
110 cm (43Љ) 2.6 m (8Ј 8Љ)
91 cm (36Љ) 2.2 m (7Ј 2Љ)
61 cm (24Љ) 1.5 m (4Ј 10Љ) 1.7 m (5Ј 7Љ)
46 cm (18Љ) 1.1 m (3Ј 7Љ) 1.3 m (4Ј 2Љ)
מ 7.5 cm (מ 2 31/32Љ) מ 5.7 cm (מ 2 15/64Љ) χ
: Picture size (diag.) (in/cm)
L: Projection distance (m/ft)
The formula for picture size and projection distance
[m/cm]
L1 (m) = 0.03658
L2 (m) = 0.04267
[Feet/inches]
L1 (ft) = 0.03658 / 0.3048
L2 (ft) = 0.04267 / 0.3048
χ
χ
χ
L1: Minimum projection distance (m/ft)
L2: Maximum projection distance (m/ft)
H: Distance from the bottom of the image to the lens center (cm/in)
χ
χ
χ
H (cm) = - 0.18857
H (in) = - 0.18857 / 2.54
STRETCH Mode (16:9)
Picture (Screen) size
Width
Projection distance [L]
Distance from the bottom of the Adjustable range of
image to the lens center [H]
χ
image position [S]
Diag. [ ]
Height
Minimum [L1]
Maximum [L2]
250Љ (635 cm) 553 cm (218Љ) 311 cm (123Љ) 10.0 m (32Ј 8Љ)
מ 103.2 cm (מ 40 21/32Љ) ע 51.9 cm (ע 20 27/64Љ) 225Љ (572 cm) 498 cm (196Љ) 280 cm (110Љ) 9.0 m (29Ј 5Љ)
מ 92.9 cm (מ 36 37/64Љ) ע 46.7 cm (ע 18 25/64Љ) 200Љ (508 cm) 443 cm (174Љ) 249 cm (98Љ)
150Љ (381 cm) 332 cm (131Љ) 187 cm (74Љ)
133Љ (338 cm) 294 cm (116Љ) 166 cm (65Љ)
8.0 m (26Ј 2Љ) 9.3 m(30Ј 6Љ)
מ 82.6 cm (מ 32 33/64Љ) ע 41.5 cm (ע 16 11/32Љ) 6.0 m (19Ј 7Љ) 7.0 m(22Ј11Љ)
מ 61.9 cm (מ 24 25/64Љ) ע 31.1 cm (ע 12 1 5.3 m (17Ј 5Љ) 6.2 m(20Ј 3Љ)
מ 54.9 cm (מ 21 5 ע 27.6 cm (ע 10 7 8Љ)
/
/
4Љ)
/
8Љ)
106Љ (269 cm) 235 cm (92Љ)
100Љ (254 cm) 221 cm (87Љ)
92Љ (234 cm) 204 cm (80Љ)
84Љ (213 cm) 186 cm (73Љ)
72Љ (183 cm) 159 cm (63Љ)
60Љ (152 cm) 133 cm (52Љ)
40Љ (102 cm) 89 cm (35Љ)
30Љ (76 cm) 66 cm (26Љ)
132 cm (52Љ)
125 cm (49Љ)
115 cm (45Љ)
105 cm (41Љ)
90 cm (35Љ)
75 cm (29Љ)
50 cm (20Љ)
37 cm (15Љ)
4.2 m(13Ј10Љ) 4.9 m(16Ј 2Љ)
מ 43.8 cm (מ 17 15/64Љ) ע 22.0 cm (ע 8 21/32Љ) 4.0 m (13Ј 1Љ) 4.6 m(15Ј 3Љ)
מ 41.3 cm (מ 16 17/64Љ) ע 20.8 cm (ע 8 11/64Љ) 3.7 m (12Ј 0Љ) 4.3 m(14Ј 0Љ)
מ 38.0 cm (מ 14 61/64Љ) ע 19.1 cm (ע 7 33/64Љ) 3.3 m (11Ј 0Љ) 3.9 m(12Ј10Љ)
מ 34.7 cm (מ 13 21/32Љ) ע 17.4 cm (ע 6 55/64Љ) 2.9 m (9Ј 5Љ) 3.3 m(11Ј 0Љ)
מ 29.7 cm (מ 11 45/64Љ) ע 14.9 cm (ע 5 57/64Љ) 3
2.4 m (7Ј10Љ) 2.8 m (9Ј 2Љ)
מ 24.8 cm (מ 9 1.6 m (5Ј 3Љ) 1.9 m (6Ј 1Љ)
מ 16.5 cm (מ 6 1.2 m (3Ј11Љ) 1.4 m (4Ј 7Љ)
מ 12.4 cm (מ 4 /4Љ)
/2Љ)
/8Љ)
ע 12.5 cm (ע 4 29/32Љ) ע 8.3 cm (ע 3 17/64Љ) ע 6.2 cm (ע 2 29/64Љ) 1
7
χ
: Picture size (diag.) (in/cm)
L: Projection distance (m/ft)
The formula for picture size and projection distance
[m/cm]
L1 (m) = 0.03985
L2 (m) = 0.04649
[Feet/inches]
L1 (ft) = 0.03985 / 0.3048
χ
χ
χ
χ
L1: Minimum projection distance (m/ft)
L2: Maximum projection distance (m/ft)
H: Distance from the bottom of the image to the lens center (cm/in)
S: Adjustable range of image position (cm/in) See page 43.
L2 (ft) = 0.04649 / 0.3048
χ
χ
χ
H (cm) = - 0.41299
H (in) = - 0.41299 / 2.54
χ
S (cm) = 0.20754
S (in) = 0.20754 / 2.54
Note
• There may be an error of 3% in the above values.
• Values with a minus (-) sign indicate that the lens center is lower than the bottom of the projected
image.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the Projector (Continued)
Screen Size and Projection Distance (XR-1S)
NORMAL Mode (4:3)
Picture (Screen) size
Width
Projection distance [L]
Distance from the bottom of the
image to the lens center [H]
χ
Diag. [ ]
Height
Minimum [L1]
Maximum [L2]
280Љ (711 cm) 569 cm (224Љ) 427 cm (168Љ) 9.8 m (32Ј 2Љ)
250Љ (635 cm) 508 cm (200Љ) 381 cm (150Љ) 8.8 m (28Ј 9Љ)
200Љ (508 cm) 406 cm (160Љ) 305 cm (120Љ) 7.0 m (23Ј 0Љ)
150Љ (381 cm) 305 cm (120Љ) 229 cm (90Љ) 5.3 m (17Ј 3Љ)
מ 61.5 cm (מ 24 7/32Љ) מ 54.9 cm (מ 21 5 /8Љ)
8.1 m(26Ј 8Љ)
מ 43.9 cm (מ 17 19/64Љ) 6.1 m(20Ј 0Љ)
מ 33.0 cm (מ 12 31/32Љ) 4.1 m(13Ј 4Љ)
מ 22.0 cm (מ 8 21/32Љ) 3.4 m(11Ј 2Љ)
מ 18.5 cm (מ 7 17/64Љ) 2.9 m (9Ј 7Љ)
מ 15.8 cm (מ 6 15/64Љ) 100Љ (254 cm) 203 cm (80Љ)
84Љ (213 cm) 171 cm (67Љ)
72Љ (183 cm) 146 cm (58Љ)
60Љ (152 cm) 122 cm (48Љ)
40Љ (102 cm) 81 cm (32Љ)
30Љ (76 cm) 61 cm (24Љ)
152 cm (60Љ) 3.5 m (11Ј 6Љ)
128 cm (50Љ) 2.9 m (9Ј 8Љ)
110 cm (43Љ) 2.5 m (8Ј 3Љ)
91 cm (36Љ) 2.1 m (6Ј 11Љ) 2.4 m (8Ј 0Љ)
מ 13.2 cm (מ 5 3/16Љ) 61 cm (24Љ) 1.4 m (4Ј 7Љ)
1.6 m (5Ј 4Љ)
מ 8.8 cm (מ 3 29/64Љ) מ 6.6 cm (מ 2 19/32Љ) 46 cm (18Љ) 1.1 m (3Ј 5Љ)
1.2 m (4Ј 0Љ)
χ
: Picture size (diag.) (in/cm)
L: Projection distance (m/ft)
The formula for picture size and projection distance
[m/cm]
L1 (m) = 0.03503
L2 (m) = 0.04064
[Feet/inches]
L1 (ft) = 0.03503 / 0.3048
L2 (ft) = 0.04064 / 0.3048
χ
χ
χ
L1: Minimum projection distance (m/ft)
L2: Maximum projection distance (m/ft)
H: Distance from the bottom of the image to the lens center (cm/in)
χ
χ
χ
H (cm) = - 0.21971
H (in) = - 0.21971 / 2.54
STRETCH Mode (16:9)
Picture (Screen) size
Width
Projection distance [L]
Distance from the bottom of the Adjustable range of
image to the lens center [H]
χ
image position [S]
ע 54.0 cm (ע 21 1 מ 111.7 cm (מ 43 63/64Љ) ע 51.9 cm (ע 20 27/64Љ) Diag. [ ]
Height
Minimum [L1]
Maximum [L2]
260Љ (660 cm) 576 cm (227Љ) 324 cm (127Љ) 9.9 m (32Ј 7Љ)
מ 116.2 cm (מ 45 3 /
4Љ)
/4Љ)
250Љ (635 cm) 553 cm (218Љ) 311 cm (123Љ) 9.5 m (31Ј 4Љ)
225Љ (572 cm) 498 cm (196Љ) 280 cm (110Љ) 8.6 m (28Ј 2Љ) 10.0 m(32Ј 8Љ)
מ 100.6 cm (מ 39 19/32Љ) ע 46.7 cm (ע 18 25/64Љ) 200Љ (508 cm) 443 cm (174Љ) 249 cm (98Љ)
150Љ (381 cm) 332 cm (131Љ) 187 cm (74Љ)
133Љ (338 cm) 294 cm (116Љ) 166 cm (65Љ)
7.6 m (25Ј 1Љ) 8.9 m(29Ј 1Љ)
מ 89.4 cm (מ 35 3/16Љ) ע 41.5 cm (ע 16 11/32Љ) 5.7 m (18Ј 9Љ) 6.6 m(21Ј 9Љ)
מ 67.0 cm (מ 26 25/64Љ) ע 31.1 cm (ע 12 1 /
/
4Љ)
5.1 m (16Ј 8Љ) 5.9 m(19Ј 4Љ)
מ 59.4 cm (מ 23 13/32Љ) ע 27.6 cm (ע 10 7 8Љ)
106Љ (269 cm) 235 cm (92Љ)
100Љ (254 cm) 221 cm (87Љ)
92Љ (234 cm) 204 cm (80Љ)
84Љ (213 cm) 186 cm (73Љ)
72Љ (183 cm) 159 cm (63Љ)
60Љ (152 cm) 133 cm (52Љ)
40Љ (102 cm) 89 cm (35Љ)
30Љ (76 cm) 66 cm (26Љ)
132 cm (52Љ)
125 cm (49Љ)
115 cm (45Љ)
105 cm (41Љ)
90 cm (35Љ)
75 cm (29Љ)
50 cm (20Љ)
37 cm (15Љ)
4.0 m (13Ј 3Љ) 4.7 m(15Ј 5Љ)
מ 47.4 cm (מ 18 21/32Љ) ע 22.0 cm (ע 8 21/32Љ) 3.8 m (12Ј 6Љ) 4.4 m(14Ј 6Љ)
מ 44.7 cm (מ 17 19/32Љ) ע 20.8 cm (ע 8 11/64Љ) 3.5 m (11Ј 6Љ) 4.1 m(13Ј 4Љ)
מ 41.1 cm (מ 16 3/16Љ) ע 19.1 cm (ע 7 33/64Љ) 3.2 m (10Ј 6Љ) 3.7 m(12Ј 2Љ)
מ 37.5 cm (מ 14 25/32Љ) ע 17.4 cm (ע 6 55/64Љ) 2.7 m (9Ј 0Љ) 3.2 m(10Ј 6Љ)
מ 32.2 cm (מ 12 43/64Љ) ע 14.9 cm (ע 5 57/64Љ) 2.3 m (7Ј 6Љ) 2.7 m (8Ј 9Љ)
מ 26.8 cm (מ 10 9/16Љ) ע 12.5 cm (ע 4 29/32Љ) 1.5 m (5Ј 0Љ) 1.8 m (5Ј 10Љ)
מ 17.9 cm (מ 7 1/32Љ) ע 8.3 cm (ע 3 17/64Љ) 1.1 m (3Ј 9Љ) 1.3 m (4Ј 4Љ)
מ 13.4 cm (מ 5 9/32Љ) ע 6.2 cm (ע 2 29/64Љ) χ
: Picture size (diag.) (in/cm)
L: Projection distance (m/ft)
The formula for picture size and projection distance
[m/cm]
L1 (m) = 0.038169
L2 (m) = 0.044276
H (cm) = - 0.44691
[Feet/inches]
L1 (ft) = 0.038169 / 0.3048
χ
χ
χ
χ
L1: Minimum projection distance (m/ft)
L2: Maximum projection distance (m/ft)
H: Distance from the bottom of the image to the lens center (cm/in)
S: Adjustable range of image position (cm/in) See page 43.
L2 (ft) = 0.044276 / 0.3048
χ
χ
H (in) = - 0.44691 / 2.54
χ
χ
S (cm) = 0.20754
S (in) = 0.20754 / 2.54
Note
• There may be an error of 3% in the above values.
• Values with a minus (-) sign indicate that the lens center is lower than the bottom of the projected
image.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
INPUT Terminals and Connectable Main Equipment
INPUT 1 terminal
■
Connecting the com-
INPUT 2 terminal
INPUT 3 terminal
puter. (See page 23.)
Connecting video equipment
with S-video output terminal
(VCR, DVD player, etc.). (See
page 24.)
Connecting video equipment
without S-video output
terminal. (See page 25.)
■ Connecting video
equipment with
component output
terminal (DVD player,
DTV decoder, DVD
recorder with hard disc,
etc.). (See page 24.)
AUDIO INPUT terminal
Connecting an audio
cable (Shared audio
input terminal for INPUT
1, 2 and 3.) (See pages
23, 24 and 25.)
USB terminal
Connecting the computer.
(See page 33.)
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Samples of Cables for Connection
•
For more details of connection and cables, refer to the opeation manual of the connecting equipment.
• You may need other cables or connectors not listed above.
Input
Signal
Terminal on the
projector
Equipment
Computer
Cable
RGB/USB cable (supplied)
INPUT1
RGB
video
ø3.5 mm stereo audio cable
AUDIO INPUT
Computer
audio
INPUT1
3 RCA (Component) to 15-pin D-sub cable
(optional, AN-C3CP)
Audio-visual
equipment
Compo-
nent
video
S-video cable (commercially available)
Video cable (commercially available)
INPUT2
INPUT3
S-video
Video
ø3.5 mm minijack to RCA audio cable
(commercially available)
AUDIO INPUT
Audio
Cables for a camera or a video game/3 RCA INPUT1
(Component) to 15-pin D-sub cable (optional,
AN-C3CP)
Camera/video
game
Compo-
nent
video
Cable adapter (com-
mercially available)
Cables for a camera
or a video game
INPUT2
S-video
Video
Cables for a camera
or a video game
INPUT3
Cables for a camera or a video game/ø3.5
mm minijack to RCA audio cable (commer-
AUDIO INPUT
cially available)
Cable adapter (com-
mercially available)
Audio
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Computer
Before connecting, be sure to unplug the power cord of the projector from the AC outlet and
turn off the devices to be connected. After making all connections, turn on the projector
and then the other devices.When connecting a computer, be sure that it is the last device to
be turned on after all the connections are made.
Be sure to read the operation manuals of the devices to be connected before making connections.
Supplied
accessory
RGB/USB Cable
To audio output terminal
To RGB output terminal
To USB terminal
To INPUT1
To USB terminal
terminal
To AUDIO
INPUT terminal
* ø3.5 mm stereo or
mono audio cable
(commercially
RGB/USB Cable
available or
available as Sharp
service part
QCNWGA038WJPZ)
* When using the ø3.5 mm mono audio cable, the volume level will be half of
when using the ø3.5 mm stereo audio cable.
Note
• When connecting with USB cable, you can use the remote control as a mouse for controlling cursor.
See page 33.
• See page 59 “Computer Compatibility Chart” for a list of computer signals compatible with the projec-
tor. Use with computer signals other than those listed may cause some of the functions to not work.
• A Macintosh adaptor may be required for use with some Macintosh computers. Contact your near-
est Macintosh Dealer.
• Depending on the computer you are using, an image may not be projected unless the signal
output setting of the computer is switched to the external output. Refer to the computer opera-
tion manual for switching the computer signal output settings.
“Plug and Play” function (when connecting to a 15-pin terminal)
■ This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA
DDC compatible computer will communicate their setting requirements, allowing for quick
and easy setup.
■ Before using the “Plug and Play” function, be sure to turn on the projector first and the
connected computer last.
Note
• The DDC “Plug and Play” function of this projector operates only when used in conjunction with a
VESA DDC compatible computer.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to Video Equipment
The projector has a COMPUTER/COMPONENT terminal, an S-VIDEO terminal and a VIDEO ter-
minal for video input. See the illustration below to connect with the audio-visual equipment.
The image quality is highest in order of the component signal, the S-video signal and the video
signal. If your audio-visual equipment has a component output terminal, use the COMPUTER/
COMPONENT terminal (INPUT1) on the projector for video connection.
When using a 3 RCA (Component) to 15-pin D-sub cable
To audio output terminal
To component output (Y, CB/PB, CR/PR) terminal
To INPUT1
terminal
To AUDIO
INPUT terminal
3 RCA (Component) to
15-pin D-sub cable
(optional: AN-C3CP)
ø3.5 mm minijack to RCA
audio cable (commercially
available)
When using an S-video cable
To audio output terminal
To S-video output terminal
To INPUT2
terminal
To AUDIO
INPUT terminal
S-video cable
(commercially available)
ø3.5 mm minijack to RCA
audio cable (commercially
available)
24
Download from Www.Somanuals.com. All Manuals Search And Download.
When using a composite video cable
To audio output terminal
To video output terminal
To INPUT3
terminal
To AUDIO
INPUT terminal
Composite video cable
(commercially available)
ø3.5 mm minijack to RCA
audio cable (commercially
available)
Note
• ø3.5 mm minijack to RCA audio cable (commercially available) is required for audio input.
Connecting the Power Cord
Plug the supplied power cord into the
AC socket on the side of the projector.
AC socket
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning the Projector On/Off
Info
• English is the factory default language. If you
want to change the on-screen display to another
language, change the language according to
the procedure on page 46.
Turning the Projector on
Before performing the steps in this section,
connect any equipment that you use with
the projector. (See pages 23, 24 and 25.)
Also connect the power cord to the projec-
tor. (See page 25.)
ON/STANDBY button
Lamp indicator
Press SON/STANDBY on the projector or
AON/STANDBY on the remote control.
• When the lamp is warming up, the Adjustment but-
tons blink in a clockwise direction. (When “Guide
LEDs” is set to “On”. n page 48)
• When System Lock is set, the keycode input box
appears. Enter the right keycode to start projec-
tion. See page 49 for details.
Note
• About the Lamp Indicator
The lamp indicator lights up or blinks, indicating the sta-
tus of the lamp.
Green: The lamp is ready.
Blinking in green: The lamp is warming up or shut-
ting down.
Red: The lamp is shut down abnormally or the
lamp should be replaced.
ON/STANDBY
button
• When switching on the projector, a slight flickering of the
image may be experienced within the first minute after the
lamp has been illuminated. This is normal operation as the
lamp’s control circuitry is stabilising the lamp output char-
acteristics. It should not be regarded as faulty operation.
• If the projector is put into standby mode and immediately
turned on again, the lamp may take some time to start pro-
jection.
On-screen Display (confirmation message)
Turning the Power off (Putting
the Projector into Standby Mode)
Press SON/STANDBY on the pro-
R
1
jector or AON/STANDBY on the
remote control, then press that but-
ton again while the confirmation
message is displayed, to put the
projector into standby mode.
Info
• Do not unplug the power cord during projection
or cooling fan operation. This can cause dam-
age due to rise in internal temperature, as the
cooling fan also stops.
Unplug the power cord from the AC
2
outlet after the cooling fan stops.
• When the projector is turned off, the Ad-
justment buttons blink in a counterclock-
wise direction. (When “Guide LEDs” is set
to “On”. n page 48)
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Image Projection
About the Setup Guide
Setup Guide screen
After turning on the projector, the Setup
Guide screen appears to assist you with
projector setup.
Guidance items
1 FOCUS
2 HEIGHT ADJUST
3 ZOOM
Adjust the projector by following the il-
luminated buttons or Setup Guide indi-
cators.
Press TENTER to turn off the Setup
Guide screen.
Setup Guide
indicator
Note
• The Setup Guide screen automatically high-
lights the items in order of
ON/STANDBY
button
1 FOCUS 2 HEIGHT ADJUST 3 ZOOM 4 ENTER
.
• You can adjust the focus, height or zoom any-
time you want, regardless of the selection on
the Setup Guide.
• If you do not want to display the Setup Guide
for the next time, set “Menu” - “SCR - ADJ” -
“Setup Guide” to “Off”. (See page 45.)
ENTER button
Adjusting the Projected Image
1 Adjusting the Focus
You can adjust the focus with the focus
ring on the projector.
Rotate the focus ring to adjust the fo-
cus while watching the projected image.
Focus ring
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Image Projection (Continued)
2 Adjusting the Height
HEIGHT
ADJUST button
The height of the projector can be ad-
justed using the adjustment feet at the
front and rear of the projector.
When the screen is in a higher position
than the projector, the projection image
can be made higher by adjusting the
projector.
Lift the projector to adjust its
height while pressing the HEIGHT
ADJUST button.
1
Remove your hands from the
HEIGHT ADJUST button of the
projector after its height has been
finely adjusted.
• The angle of projection is adjustable up
to 7.5 degrees from the surface on which
the projector is placed.
2
Use the rear adjustment foot to
make the projector level.
• The projector is adjustable 1 degree
from the standard position.
3
Note
• When adjusting the height of the projector,
trapezoidal distortion occurs. When “Auto
Keystone” is set to “On”, keystone correction
functions automatically to correct trapezoidal
distortion. When you want to adjust the auto-
matically corrected image, use the manual
keystone correction. (See page 44.)
Rear adjustment foot
Info
• Do not apply too much pressure on the pro-
jector when the front adjustment foot comes
out.
• When lowering the projector, be careful not to
get your fingers caught in the area between
the adjustment foot and the projector.
3 Adjusting the Screen Size
You can adjust the screen size using
the zoom knob on the projector.
zoom
in
zoom
out
Zoom Knob
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching the Input Mode
INPUT
buttons
Select the appropriate input mode for
the connected equipment.
AV MUTE button
PressC INPUT 1, D INPUT 2 or
EINPUT 3 on the remote control to se-
lect the input mode.
Volume buttons
• When pressing INPUT (W/Y) on the projector,
input mode switches in order of
INPUT1 INPUT2 INPUT3
.
• When “Auto Search” is set to “On”, INPUT (W/
Y) on the projector functions as the Auto Search
buttons. (See page 47.)
Adjusting the Volume
On-screen Display
Press K/L on the remote control or
V/X on the projector to adjust the vol-
ume.
Note
• Pressing K/V will lower the volume.
• Pressing L/X will raise the volume.
Displaying the Black Screen
and Turning off the Sound
Temporarily
On-screen Display
Press MAV MUTE on the remote con-
trol to temporarily display a black
screen and turn off the sound.
Note
• Pressing MAV MUTE again will turn the pro-
jected image back on.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Image Projection (Continued)
Resize Mode
This function allows you to modify or customize the resize mode to enhance the input image. De-
pending on the input signal, you can choose “NORMAL”, “BORDER” or “STRETCH” image.
Press HRESIZE.
• See page 43 for setting on menu screen.
RESIZE button
Computer
NORMAL
XR-1S
BORDER
STRETCH
XR-1X XR-1S
XR-1X
XR-1X
XR-1S
SVGA (800 K 600)
XGA (1024 K 768)
SXGA (1280 K 960)
1024
K
768
800
800
K
600
600
768
K
576
600
K
450
1024
K
576
800
K 450
4:3 aspect ratio
SXGA L (1400
SXGA (1280
1280 K 720
K
1050)
K
1024)
1024
K
J
768
K
J
768
K
J
576
600
K
J
450
1024
1024
K
K
576
576
800
800
K
K
450
450
Other aspect ratios
Output screen image
BORDER
Input Signal
Computer
Image type
NORMAL
STRETCH
XR-1X
XR-1S
Resolution
lower than
XGA
Resolution
lower than
SVGA
XGA
SVGA
4:3 aspect ratio
Resolution
higher than
XGA
Resolution
higher than
SVGA
SXGA
(1280K1024)
5:4 aspect ratio
16:9 aspect ratio
1280K720
:
Cutout area on which images cannot be projected.
* Mode for projecting an image with the original
aspect ratio without cutting any portions.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO
• “STRETCH” is fixed when 540P, 720P or 1080I signals are entered.
Input Signal
Output screen image
BORDER
DVD / Video
Image type
NORMAL
STRETCH
4:3 aspect ratio
Letter box
480I, 480P, NTSC,
PAL, SECAM
Squeezed 16:9 image
Squeezed 4:3 image
16:9 aspect ratio
540P, 720P, 1080I
(16:9)
16:9 aspect ratio
(4:3 aspect ratio in
16:9 screen)
* Mode for projecting an image with the original aspect ratio without cutting any portions.
: Cutout area on which images cannot be projected.
: Area on which the image is not included in the original signals.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting/Operating with the Remote Control
AUTO SYNC
button
Auto Sync (Auto Sync Ad-
justment)
Auto Sync function works when detect-
ing input signal after the projector turns
on.
FREEZE button
Press FAUTO SYNC to manually ad-
just with Auto Sync function.
PICTURE MODE
button
Note
• When the optimum image cannot be achieved
with Auto Sync adjustment, use the help menu
for manual adjustments. (See page 51.)
Freezing a Moving Image
Press NFREEZE.
• The projected image is frozen.
1
Press NFREEZE again to return
2
to the moving image from the cur-
rently connected device.
Selecting the Picture Mode
You can select the suitable picture
mode for the projected image, such as
movie or video game.
Press GPICTURE MODE.
• When pressing GPICTURE MODE, the picture
mode changes in order of
Standard Presentation Cinema Game
.
Note
• See page 40 for details on the picture mode.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Mouse Function
When connecting the projector and computer with the USB terminals, you can
use the remote control as the computer mouse.
Supplied
RGB/USB Cable
accessory
To RGB output terminal
To USB terminal
To USB terminal
To INPUT1 terminal
RGB/USB Cable
Connect the projector and the
computer with the supplied RGB/
USB cable.
1
MOUSE/Adjuatment
button (P/R/O/Q)
Use the mouse functions.
2
• MOUSE/Adjustment button (P/R/O/Q)
functions to move cursor.
• IL CLICK button functions as the left
click.
• JR CLICK button functions as the right
click.
L CLICK button
R CLICK button
• IL CLICK and JR CLICK have com-
mon function when your computer sup-
ports only a one-click mouse, such as
Macintosh.
Note
• you can not use this function when displaying
the menu screen.
Computer mouse
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Items
The following shows the items that can be set in the projector.
Main menu
Sub menu
“Picture” menu
Standard
Presentation
Cinema
Picture
Picture Mode
Page 40
Page 40
Game
INPUT 1 (RGB)
Contrast
Bright
Red
-30
-30
-30
-30
-30
-30
-30
+30
Picture
SCR - ADJ
PRJ - ADJ
Standard
Help
+30
Picture Mode
Contrast
Bright
+30 *1
+30 *1
0
Blue
0
Color
Tint
*2
*2
+30
+30
Red
0
0
Blue
CLR Temp
Bright Boost
sRGB
7 5 0 0 K
Sharp
+30 *2
Off
Off
Page 40
5500K
6500K
7500K
8500K
9300K
10500K
CLR Temp
Reset
Page 41
SEL./ADJ.
ENTER
END
Bright Boost [On/Off]
Page 41
Progressive
INPUT 1 (Component)/INPUT 2/INPUT 3
2D Progressive
3D Progressive
Film Mode
*2
*1
Picture
SCR - ADJ
PRJ - ADJ
Standard
Help
Page 42
sRGB [On/Off]
Picture Mode
Contrast
Bright
0
0
0
0
0
Page 42
Reset
Color
*1 Items when inputting RGB signal through
INPUT 1
Tint
Sharp
CLR Temp
Bright Boost
Progressive
Reset
7 5 0 0 K
*2 Items when inputting component signal
through INPUT 1, or when selecting INPUT
2 or INPUT 3
Off
3D Progressive
Main menu
Sub menu
SEL./ADJ.
ENTER
END
Resize
Normal
Border
Stretch
SCR - ADJ
Page 43
Image Shift
Page 43
“SCR - ADJ” menu
[XR-1X]
[XR-1S]
-96 +96
-75 +75
Page 43
Picture
SCR - ADJ
PRJ - ADJ
Help
Keystone
Resize
Normal
[XR-1X]
[XR-1S]
-127 +127
-100 +100
Image Shift
Keystone
0
0
Page 44
Auto Keystone [On/Off]
Auto Keystone
OSD Display
Background
Setup Guide
PRJ Mode
Language
Off
On
Page 44
Logo
On
OSD Display [On/Off]
Page 44
Front
English
Background
Logo
Blue
None
Page 45
Setup Guide [On/Off]
SEL./ADJ.
ENTER
END
Page 45
PRJ Mode
Front
• You can adjust the menu items with icons (
and ) using the respective buttons on the
remote control.
Front + Rotate
Rear
Rear + Rotate
Page 46
English
Language
Deutsch
Español
Nederlands
Français
Italiano
Page 46
Svenska
Português
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Main menu
PRJ - ADJ
Sub menu
“PRJ - ADJ” menu
Eco/Quiet Mode [On/Off]
Page 47
Page 47
Auto Search [On/Off]
Picture
SCR - ADJ
PRJ - ADJ
Help
Page 47
Auto Power Off [On/Off]
Page 48
Eco/Quiet Mode
Auto Search
On
On
On
On
On
Auto Power Off
Guide LEDs
Guide LEDs [On/Off]
System Sound
System Lock
Page 48
System Sound [On/Off]
Page 50
System Lock
Old Code
New Code
Reconfirm
Lamp Timer(Life)
SEL./ADJ.
0
h
100%
END
Page 49
Lamp Timer(Life)
ENTER
Page 50
“Help” menu
The items you can set with “Help”
menu
Picture
SCR - ADJ
PRJ - ADJ
Help
“Help” menu n Page 51
• Vertical stripes or flickering image appear
Auto Sync
There is no picture or audio
Vertical stripes or flickering image appear
Data image is not centered
Color is faded or poor
Adjust vertical noise
Adjust horizontal noise
• Data image is not centered
Auto Sync
Picture is dark
The image is distorted
H-Pos
V-Pos
Reset all adjustments to default settings
• Color is faded or poor
INPUT 1
SEL.
ENTER
END
Signal type: Auto/RGB/Component
INPUT 2 or INPUT 3
Video System: A u t o / P A L / S E C A M /
NTSC3.58/NTSC4.43/PAL-
M/PAL-N/PAL-60
* The selectable items vary depending on the in-
put signal and the selected input mode.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menu Screen
The menu can be operated to achieve two functions, adjustment and setting. (For setting the menu
items, see pages 38 and 39.)
Operating with the projector
When “PRJ - ADJ” - “Guide LEDs” is set to “On”, the buttons used for menu adjustment on the
projector light up.
Example: When W, Y and the MENU/HELP button light up on the projector, you can use those
buttons for operation.
Adjustment buttons (W/Y/V/X)
MENU/HELP button
ENTER button
MENU/HELP
button
MOUSE Adjustment
button (P/R/O/Q)
ENTER button
RETURN button
Menu Selections (Adjustments)
Example: Adjusting “Bright”.
• This operation can also be performed by using the buttons on the projector.
Example: “Picture” screen menu for INPUT 1
Press BMENU.
1
2
(RGB) mode
• The “Picture” menu screen for the se-
lected input mode is displayed.
Menu item
Picture
SCR - ADJ
PRJ - ADJ
Standard
Help
Press Q or O to display the other
menu screen.
• The selected menu item is highlighted.
Picture Mode
Contrast
Bright
0
0
0
0
Red
Blue
CLR Temp
Bright Boost
sRGB
7 5 0 0 K
Off
Off
Reset
SEL./ADJ.
ENTER
END
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Press P or R to select the item you
want to adjust.
• The selected item is highlighted.
Picture
SCR - ADJ
PRJ - ADJ
Standard
Help
3
Picture Mode
Contrast
Bright
0
0
0
0
Red
Blue
CLR Temp
Bright Boost
sRGB
7 5 0 0 K
Off
Off
Reset
SEL./ADJ.
Single ADJ
END
Single adjustment items
Picture
SCR - ADJ
PRJ - ADJ
Normal
Help
Resize
Image Shift
Keystone
0
0
Auto Keystone
Off
To adjust the projected
image while watching it
Press IENTER.
Picture
• The selected single adjustment item (e.g.
“Bright”) appears instead of the menu.
• When pressing P or R, the following item
(“Red” after “Bright”) will be displayed.
Bright
0
SEL./ADJ.
Rtn. Menu
END
Note
• Press IENTER to return to the previ-
ous screen.
Press O or Q to adjust the item
selected.
Picture
SCR - ADJ
PRJ - ADJ
Standard
Help
4
5
Picture Mode
Contrast
Bright
• The adjustment is stored.
0
1 5
Red
0
0
Blue
CLR Temp
Bright Boost
sRGB
7 5 0 0 K
Off
Off
Reset
SEL./ADJ.
Single ADJ
END
Press BMENU.
• The menu screen will disappear.
Note
• Press IRETURN to return to the previous screen when the menu is displayed.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menu Screen (Continued)
The menu can be operated to achieve two functions, adjustment and setting. (For adjusting the
menu items, see pages 36 and 37.)
MENU/HELP
button
MOUSE Adjustment
button (P/R/O/Q)
ENTER button
RETURN button
Menu Selections (Settings)
Example: Setting “Background”.
•This operation can also be performed by using the buttons on the projector.
Example: “Picture” screen menu for INPUT 1
(RGB) mode
Press BMENU.
• The “Picture” menu screen for the se-
lected input mode is displayed.
1
Menu item
Picture
SCR - ADJ
PRJ - ADJ
Help
Press O or Q to display the other
menu screen.
• The selected menu item is highlighted.
Picture Mode
Contrast
Bright
Standard
2
0
0
Red
0
0
Blue
CLR Temp
Bright Boost
sRGB
7 5 0 0 K
Off
Off
Reset
SEL./ADJ.
ENTER
END
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture
SCR - ADJ
PRJ - ADJ
Normal
Help
Press P or R to select the item you
want to set, and then press
IENTER or Q to display the sub
menu.
3
4
Resize
Image Shift
Keystone
0
0
Auto Keystone
OSD Display
Background
Setup Guide
PRJ Mode
Language
Off
On
Logo
Blue
•The selected item is highlighted.
On
Front
English
None
Note
SEL./ADJ.
ENTER
END
• Press JRETURN or O to return to the
previous screen.
Press P or R select the setting of
the item displayed in the sub
menu.
Picture
SCR - ADJ
PRJ - ADJ
Help
Resize
Normal
Image Shift
Keystone
0
0
Auto Keystone
OSD Display
Background
Setup Guide
PRJ Mode
Language
Off
On
Logo
Blue
On
Front
English
None
SEL./ADJ.
ENTER
END
Press IENTER.
5
6
Press BMENU.
• The menu screen will disappear.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Adjustment (“Picture” menu)
You can adjust the projector’s picture to your preferences using the “Picture” menu.
Selecting the Picture mode
Adjusting the Image
Menu operation n Page 38
Menu operation n Page 36
Q Example: “Picture” screen menu for
INPUT 1 (RGB) mode
Q Example: “Picture” screen menu for
INPUT 1 (RGB) mode
Picture
SCR - ADJ
PRJ - ADJ
Standard
Help
Picture
SCR - ADJ
PRJ - ADJ
Standard
Help
Picture Mode
Contrast
Bright
Picture Mode
Contrast
Bright
0
0
0
0
0
0
0
0
Red
Red
Blue
Blue
CLR Temp
Bright Boost
sRGB
7 5 0 0 K
CLR Temp
Bright Boost
sRGB
7 5 0 0 K
Off
Off
Off
Off
Reset
Reset
SEL./ADJ.
ENTER
END
SEL./ADJ.
ENTER
END
Description of Items
Selectable items
Description of Adjustment Items
Adjustment
Items
Description
For standard image
O button
Q button
Standard
Contrast
For less
contrast.
For more
contrast.
Presentation
Brightens darker portions of
image for more enhanced
presentations.
Bright
For less
brightness.
For more
brightness.
Cinema
Game
Gives greater depth to darker
portions of image for a more
exciting theater experience.
Red*1
Blue*1
For weaker red. For stronger red.
For weaker
blue.
For stronger
blue.
For natural color gradation for
playing a game, etc.
Color*2
Tint*2
For less color
intensity.
For more color
intensity.
For making skin For making skin
tones purplish.
Note
tones greenish.
• You can also press GPICTURE MODE on the
remote control to select the picture mode. (See
page 32.)
Sharp*2
For less
sharpness.
For more
sharpness.
*1 Not adjustable/selectable when you set “sRGB”
menu item to “On”, or the input signal is
component.
*2 Not displayed in the RGB input mode.
Note
• To reset all adjustment items, select “Reset”
and press IENTER.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the ColorTemperature Emphasizing the Contrast
This function emphasizes the bright portions of
images to obtain a higher contrast image.
Menu operation n Page 38
Menu operation n Page 36
QExample: “Picture” screen menu for
INPUT 1 (RGB) mode
Q Example: “Picture” screen menu for
INPUT 1 (RGB) mode
Picture
SCR - ADJ
PRJ - ADJ
Standard
Help
Picture
SCR - ADJ
PRJ - ADJ
Standard
Help
Picture Mode
Contrast
Bright
Picture Mode
Contrast
Bright
0
0
0
0
0
0
0
0
Red
Red
Blue
Blue
CLR Temp
Bright Boost
sRGB
7 5 0 0 K
CLR Temp
Bright Boost
sRGB
7 5 0 0 K
Off
Off
Off
Off
Reset
Reset
SEL./ADJ.
ENTER
END
SEL./ADJ.
ENTER
END
Note
Note
• When using this function, the image color may
become pale or the tint may be inappropri-
ate.
• “Bright Boost” cannot be set when “sRGB” is
set to “On”.
• Values on “CLR Temp” are only for general
standard purposes.
• “CLR Temp” cannot be set when “sRGB” is
set to “On”.
Description of Items
Selectable
Description
items
5500K
6500K
7500K
8500K
9300K
10500K
For lower color temperature for
warmer, reddish incandescent-like
images.
P
R
For higher color temperature for
cooler, bluish, fluorescent-like images.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Adjustment (“Picture” menu) (Continued)
Progressive
sRGB Setting
Menu operation n Page 38
Menu operation n Page 38
Q Example: “Picture” screen menu for
INPUT 2 mode
Q Example: “Picture” screen menu for
INPUT 1 (RGB) mode
Picture
SCR - ADJ
PRJ - ADJ
Standard
Help
Picture
SCR - ADJ
PRJ - ADJ
Standard
Help
Picture Mode
Contrast
Bright
Picture Mode
Contrast
Bright
0
0
0
0
0
0
0
0
0
Color
Red
Tint
Blue
Sharp
CLR Temp
Bright Boost
sRGB
7 5 0 0 K
CLR Temp
Bright Boost
Progressive
Reset
7 5 0 0 K
Off
Off
Off
3D Progressive
Reset
SEL./ADJ.
ENTER
END
SEL./ADJ.
ENTER
END
Description of Items
Note
Selectable
items
Description
Useful to display fast-moving images
• An international standard of color reproduc-
tion regulated by the IEC (International
Electrotechnical Commission). As the fixed
color area has been decided by the IEC, the
images are displayed in a natural tint based
on an original image, when “sRGB” is set to
“ON”.
2D
Progressive such as sports and action films.
3D Useful to display relatively slow-
Progressive moving images such as drama and
documentary more clearly.
• For additional information about the sRGB
function, visit “http://www.srgb.com/”.
• You cannot set the items, “Red”, “Blue”, “CLR
Temp”, “Bright Boost”, when “sRGB” is set to
“On”.
Film Mode Reproduces the image of film source*
clearly. Displays the optimized image of
film transformed with three-two pull down
(NTSC and PAL60Hz) or two-two pull
down (PAL50Hz and SECAM) enhance-
ment to progressive mode images.
* The film source is a digital video recording with the
original encoded as is at 24 frames/second. The
projector can convert this film source to progres-
sive video at 60 frames/second with NTSC and
PAL60Hz or at 50 frames/second with PAL50Hz
and SECAM to play back a high-definition image.
Info
• When “sRGB” is set to “On”, the projected
image may become dark, but this does not
indicate a malfunction.
Note
• In NTSC or PAL60Hz, even if the 3D Progres-
sive mode has been set, the three-two pull
down enhancement will be enabled automati-
cally when the film source has been entered.
• When the image is blurred or noisy, switch to
the optimal mode.
• When using progressive inputs, inputs are di-
rectly displayed so that 2D Progressive, 3D
Progressive and Film Mode cannot be se-
lected.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Projected Image
(“SCR - ADJ” menu)
You can adjust the projected image and on-screen display to your preferences using the “SCR -
ADJ” menu.
Setting the Resize Mode
Adjusting the Image Position
You can move the projected image vertically.
Menu operation n Page 38
Menu operation n Page 36
Picture
SCR - ADJ
PRJ - ADJ
Normal
Help
Picture
SCR - ADJ
PRJ - ADJ
Stretch
Help
Resize
Resize
Image Shift
Keystone
0
0
Image Shift
Keystone
0
0
Auto Keystone
OSD Display
Background
Setup Guide
PRJ Mode
Language
Off
Auto Keystone
OSD Display
Background
Setup Guide
PRJ Mode
Language
Off
On
On
Logo
On
Logo
On
Front
English
Front
English
SEL./ADJ.
ENTER
END
SEL./ADJ.
ENTER
END
Note
• For details of the Resize mode, see pages 30
and 31.
• You can also press HRESIZE on the remote
control to set the resize mode. (See page 30.)
O button
Q button
Note
• You cannot set this item when “Resize” is set
to “Normal”.
• To reset this function, select “0”.
• When adjusting the image shift, “Keystone” is
set to “0” and “Auto Keystone” is set to “Off”.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Projected Image (“SCR - ADJ” menu) (Continued)
Keystone Correction
Setting On-screen Display
When the image is projected either from the top This function allows you to turn the on-screen
or from the bottom towards the screen at an messages on or off.
angle, the image becomes distorted
trapezoidally. The function for correcting trap-
ezoidal distortion is called Keystone Correction.
Menu operation n Page 38
Picture
SCR - ADJ
PRJ - ADJ
Normal
Help
Resize
Auto Keystone Correction
Image Shift
Keystone
0
0
Set“Auto Keystone”on the“SCR - ADJ”
menu to “On”.
Auto Keystone
OSD Display
Background
Setup Guide
PRJ Mode
Language
Off
On
Menu operation n Page 38
Logo
On
Manual Keystone Correction
Front
English
Set“Auto Keystone”on the“SCR - ADJ”
menu to “Off”, and select “Keystone”,
then adjust with the slide bar.
SEL./ADJ.
ENTER
END
Description of Items
Menu operation n Page 36
Selectable
items
Description
Picture
SCR - ADJ
PRJ - ADJ
Normal
Help
On
Off
All On-screen Displays are displayed.
Resize
Image Shift
Keystone
0
0
INPUT/VOLUME/AV MUTE/FREEZE/
AUTO SYNC/RESIZE/PICTURE MODE/
“An invalid button has been pressed.”
are not displayed.
Auto Keystone
OSD Display
Background
Setup Guide
PRJ Mode
Language
Off
On
Logo
On
Front
English
SEL./ADJ.
ENTER
END
Manual Correction
O button
Q button
Note
• The Keystone Correction can be adjusted up
to an angle of approximately 13 degrees with
the “Auto Keystone” and up to an angle of
approximately 15 degrees with the manual
“Keystone”.
(when “Resize” is set to “Normal”)
• When the screen is slanting or the image is
deteriorated, set “Auto Keystone” to “Off”.
• When adjusting the keystone or when “Auto
Keystone” is set to “On”, “Image Shift” is au-
tomatically set to “0”.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Background Image Setting the Setup Guide
You can set the Setup Guide screen during the
projector startup.
Menu operation n Page 38
Menu operation n Page 38
Picture
SCR - ADJ
PRJ - ADJ
Normal
Help
Picture
SCR - ADJ
PRJ - ADJ
Normal
Help
Resize
Resize
Image Shift
Keystone
0
0
Image Shift
Keystone
0
0
Auto Keystone
OSD Display
Background
Setup Guide
PRJ Mode
Language
Off
Auto Keystone
OSD Display
Background
Setup Guide
PRJ Mode
Language
Off
On
On
Logo
On
Logo
On
Front
English
Front
English
SEL./ADJ.
ENTER
END
SEL./ADJ.
ENTER
END
Description of Items
Description of Items
Selectable items
Description
Sharp logo screen
Blue screen
Selectable items
Description
Logo
Blue
On
Displaying the Setup Guide
when turning the projector on.
Off
Not displaying the Setup
Guide.
None
—
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Projected Image (“SCR - ADJ” menu) (Continued)
Reversing/Inverting Projected Selecting the On-screen Display
Images
Language
The projector can switch the on-screen display
language among 11 languages.
Menu operation n Page 38
Menu operation n Page 38
Picture
SCR - ADJ
PRJ - ADJ
Normal
Help
Picture
SCR - ADJ
PRJ - ADJ
Normal
Help
Resize
Resize
Image Shift
Keystone
0
0
Image Shift
Keystone
0
0
Auto Keystone
OSD Display
Background
Setup Guide
PRJ Mode
Language
Off
Auto Keystone
OSD Display
Background
Setup Guide
PRJ Mode
Language
Off
On
On
Logo
On
Logo
On
Front
English
Front
English
SEL./ADJ.
ENTER
END
SEL./ADJ.
ENTER
END
Description of Items
Selectable items
Selectable items
Description
English
Deutsch
Español
Nederlands
Français
Italiano
Front
Projecting from the front of the
screen
Front + Rotate
Rear
Projecting with a mirror
Projecting from the rear of the
screen or with a mirror
Svenska
Português
Rear + Rotate
Projecting with a mirror
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Projector Function
(“PRJ - ADJ” menu)
You can use the “PRJ - ADJ” menu to enhance the usage for the projector.
Eco/Quiet Mode
Auto Search Function
Menu operation n Page 38
This function automatically searches for and
switches to the input mode in which signals are
being received, when the projector is turned on,
or when the INPUT button is pressed.
Picture
SCR - ADJ
PRJ - ADJ
Help
Eco/Quiet Mode
Auto Search
On
On
On
On
On
Auto Power Off
Guide LEDs
Menu operation n Page 38
System Sound
System Lock
Picture
SCR - ADJ
PRJ - ADJ
Help
Eco/Quiet Mode
Auto Search
On
On
On
On
On
Auto Power Off
Guide LEDs
Lamp Timer(Life)
SEL./ADJ.
0
h
100%
END
System Sound
System Lock
ENTER
Note
• This function is factory preset to “Off”.
• When “Eco/Quiet Mode” is set to “On”, the
power consumption will decrease and the
lamp life will extend. (Projection brightness
decreases 10%.)
Lamp Timer(Life)
SEL./ADJ.
0
h
100%
END
ENTER
Note
When “Auto Search” is set to “On”
• The projector automatically selects the avail-
able input source.
Description of items
Power
Select-
• If two or more input signals are found, the pro-
jector selects the input source in the order of
INPUT 1 n INPUT 2 n INPUT 3 when you
press INPUT (W/Y) on the projector.
• While “Auto Search” is set to “On”, press
CINPUT 1, DINPUT 2 or EINPUT 3 on
the remote control to select an input mode
other than the input mode selected by the pro-
jector.
Bright-
ness
Fan
consumption
able
items
Lamp Life
sound (When using
AC 100V)
On
Off
Approx.
90%
Low
177W
Approx.
4,000
hours
100%
Stan-
dard
195W
Approx.
3,000
hours
• When “Auto Search” is set to “Off”, input mode
switches in order of
INPUT1 INPUT2 INPUT3
by press-
ing INPUT (W/Y) on the projector.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Projector Function (“PRJ - ADJ” menu) (Continued)
Auto Power Off Function
Setting the Guide LEDs
Menu operation n Page 38
Menu operation n Page 38
Picture
SCR - ADJ
PRJ - ADJ
Help
Picture
SCR - ADJ
PRJ - ADJ
Help
Eco/Quiet Mode
Auto Search
On
On
On
On
On
Eco/Quiet Mode
Auto Search
On
On
On
On
On
Auto Power Off
Guide LEDs
Auto Power Off
Guide LEDs
System Sound
System Lock
System Sound
System Lock
Lamp Timer(Life)
SEL./ADJ.
0
h
100%
END
Lamp Timer(Life)
SEL./ADJ.
0
h
100%
END
ENTER
ENTER
Description of items
Description of items
Selectable
items
Selectable
items
Description
Description
On
When no input signal is detected for
more than 15 minutes, the projector will
automatically enter standby mode.
On
The indicators for operation guidance
and the buttons for operation light up.
Off
No indicators or buttons for operation
guidance blinks or lights up.
Off
The Auto Power Off function will be
disabled.
Note
• When the Auto Power Off function is set to
“On”, 5 minutes before the projector enters
standby mode, the message “Enter STANDBY
mode in X min.” will appear on the screen to
indicate the remaining minutes.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
System Lock Function
This function prevents unauthorized use of the
projector. Once this function is activated, users
must enter the correct keycode each time the
projector is turned on. We suggest you record
the keycode in a safe place where only au-
thorized users have access.
Press the 4 buttons on the remote
control or on the projector to en-
ter the new keycode in “New
code”.
2
Note
Info
• You can not use the following buttons for
keycode:
AON/STANDBY
IENTER
JRETURN
BMENU/HELP
• If you lose or forget your keycode, contact your
nearest Sharp Authorized Projector Dealer or
Service Center (see page 62). Even if the prod-
uct warranty is valid, the keycode reset will
incur a charge.
•
•
•
•
• System lock function recognizes each
button on the remote control or on the
projector as an individual button, even
if they share the same button name. If
you set the keycode with the buttons
on the projector, use only those but-
tons on the projector. If you set the
keycode with the buttons on the re-
mote control, use only those buttons
on the remote control.
Menu operation n Page 38
Picture
SCR - ADJ
PRJ - ADJ
Help
Eco/Quiet Mode
Auto Search
On
On
On
On
On
Auto Power Off
Guide LEDs
System Sound
System Lock
PRJ - ADJ
Setting the System Lock
Old Code
* * * *
Setting/Changing the keycode
– – – –
– – – –
New Code
Reconfirm
Press the 4 buttons on the remote
1
control or on the projector to en-
ter the preset keycode in “Old
Enter the same keycode in “Re-
confirm”.
3
Code”.
• When setting the keycode for the first
time, press Y on the projector for four
times.
Note
Not displaying the keycode input screen
when turning the projector on
• Press Y on the projector for four times in steps
2 and 3 above.
PRJ - ADJ
Setting the System Lock
– – – –
– – – –
– – – –
Old Code
New Code
Reconfirm
When the System Lock is set
• When System Lock is set, the keycode input
screen appears after the power is turned on.
When it appears, enter the right keycode to
start projection.
Note
• If you input a wrong keycode, the cursor
returns to the first point of the “Old Code”.
• The preset keycode is 4 Y buttons on
the projector. When this keycode is set,
the keycode input screen does not ap-
pear.
Input screen for keycode
– – – –
System Lock
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Projector Function (“PRJ - ADJ” menu) (Continued)
Setting the Confirmation Sound Checking the Lamp Life Status
You can confirm the cumulative lamp usage time
and the remaining lamp life (percentage).
Menu operation n Page 38
Menu operation n Page 36
Picture
SCR - ADJ
PRJ - ADJ
Help
Picture
SCR - ADJ
PRJ - ADJ
Help
Eco/Quiet Mode
Auto Search
On
On
On
On
On
Eco/Quiet Mode
Auto Search
On
On
On
On
On
Auto Power Off
Guide LEDs
Auto Power Off
Guide LEDs
System Sound
System Lock
System Sound
System Lock
Lamp Timer(Life)
SEL./ADJ.
0
h
100%
END
Lamp Timer(Life)
SEL./ADJ.
0
h
100%
END
ENTER
ENTER
Description of items
Description of Lamp Life
Selectable
items
Lamp usage condition
“Life”
Remaining lamp life
Description
100%
5%
On
A confirmation sound is made when
the projector turns on/off.
Operated exclusively in
Eco/Quiet Mode “On”
Approx.
4,000
Approx.
200 hours
Off
No confirmation sound is made.
hours
Operated exclusively in
Eco/Quiet Mode “Off”
Approx.
3,000
Approx.
150 hours
hours
Note
• It is recommended that the lamp be changed
when the remaining lamp life becomes 5%.
For lamp replacement, contact your nearest
Sharp Authorized Projector Dealer or Service
Center.
• The lamp life may vary depending on the us-
age condition.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting with “Help” menu
This function advises you to solve the problems during usage.
MENU/HELP
button
Displaying “Help” menu screen
Adjuatment button
(P/R/O/Q)
ENTER button
Example: When image flickering appears
Operation to solve image flickering when pro-
jecting the computer RGB signal.
Press BMENU/HELP.
Select “Initiate “Auto Sync” Ad-
1
2
4
5
justments”, then press IENTER.
Press O or Q to select“Help”, then
If the image is not improved, se-
lect “Adjust horizontal noise.”,
then press IENTER.
press IENTER.
Picture
SCR - ADJ
PRJ - ADJ
Help
There is no picture or audio
Press O or Q to adjust.
Vertical stripes or flickering image appear
Data image is not centered
Color is faded or poor
6
Help
Phase
SEL./ADJ.
0
Picture is dark
Rtn. Menu
END
The image is distorted
Reset all adjustments to default settings
Note
SEL.
ENTER
END
• You can adjust the items with check marks (✔).
• Some items in the Help menu may not appear,
depending on the projected image.
• If the problem is not solved, refer to
“Troubleshooting”. (see pages 60 and 61)
Press P or R to select “Vertical
stripes or flickering image ap-
pears” on Help menu, then press
IENTER.
3
Help
Vertical stripes or flickering image appear
Initiate "Auto Sync" Adjustments.
If there is no change after performing "Auto Sync"
adjustments, adjust the following items.
Adjust vertical noise
Adjust horizontal noise
Reset the 2 items above
Return
Cur. sig. freq: H 43 kHz / V 60 Hz
SEL.
ENTER
END
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Cleaning the projector
Cleaning the lens
■ Be sure to unplug the power cord before
cleaning the projector.
■ Use a commercially available blower or lens
cleaning paper (for glasses and camera lenses)
for cleaning the lens. Do not use any liquid type
cleaning agents, as they may wear off the
coating film on the surface of the lens.
■ As the surface of the lens can easily get
damaged, be sure not to scrape or hit the lens.
■ The cabinet as well as the operation panel is
made of plastic. Avoid using benzene or
thinner, as these can damage the finish on the
cabinet.
■ Do not use volatile agents such as insecticides
on the projector.
Do not attach rubber or plastic items to the
projector for long periods.
The effects of some of the agents in the plastic
may cause damage to the quality or finish of the
projector.
Cleaning the exhaust and intake vents
■ Use a vacuum cleaner to clean dust from the
exhaust vent and the intake vent.
Mild detergent diluted
with water
Thinner
Wax
■ Wipe off dirt gently with a soft flannel cloth.
■ When the dirt is hard to remove, soak a cloth in
a mild detergent diluted with water, wring the
cloth well and then wipe the projector.
Strong cleaning detergents may discolor, warp
or damage the coating on the projector. Make
sure to test on a small, inconspicuous area on
the projector before use.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance Indicators
■ The warning lights (ON/STANDBY button, lamp indicator and temperature warning indicator) on
the projector indicate problems inside the projector.
■ If a problem occurs, either the temperature warning indicator or the lamp indicator will illuminate
red, and the projector will enter standby mode. After the projector has entered standby mode,
follow the procedures given below.
ON/STANDBY button
Lamp indicator
Temperature warning indicator
About the temperature warning indicator
If the temperature inside the projector increases, due to blockage of the air vents, or the setting location,
“
” will illuminate in the lower left corner of the picture. If the temperature keeps on rising, the lamp
will turn off and the temperature warning indicator will blink, the cooling fan will run, and then the projec-
tor will enter standby mode. After “
54.
” appears, be sure to perform the measures described on page
About the lamp indicator
■ When the remaining lamp life becomes 5% or less, (yellow) and “Change The Lamp” will be
displayed on the screen. When the percentage becomes 0%, it will change to (red), the lamp will
automatically turn off and then the projector will automatically enter standby mode. At this time, the
lamp indicator will illuminate in red.
■ If you try to turn on the projector a fourth time without replacing the lamp, the projector will
not turn on.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance Indicators (Continued)
Maintenance indicator
Problem
Cause
Possible Solution
Normal
Abnormal
Tempera-
ture
warning
indicator
The internal
temperature is
abnormally
high.
•
Blocked air intake
• Relocate the projector to
an area with proper
ventilation. (see page 8)
Off
Red on
(Standby)
•
•
Cooling fan
breakdown
Internal circuit
failure
• Take the projector to your
nearest Sharp Authorized
Projector Dealer or Service
Center (see page 62) for
repair.
•
•
Clogged air intake
Lamp
indicator
The lamp does
not illuminate.
The lamp is shut
down abnormally.
• Disconnect the power cord
from the AC outlet, and
then connect it again.
Green on
(Green
blinks
Red on
when the
lamp is
warming
up.)
Time to change
the lamp.
•
Remaining lamp life • Carefully replace the lamp.
becomes 5% or
less.
(See page 56.)
• Take the projector to your
nearest Sharp Authorized
Projector Dealer or Service
Center (see page 62) for
repair.
The lamp does
not illuminate.
•
•
Burnt-out lamp
Red on
(Standby)
Lamp circuit failure
• Please exercise care when
replacing the lamp.
• Securely install the cover.
Power
button
The power
•
The lamp unit cover • If the power indicator blinks
Green on/
Red on
Red
blinks
indicator blinks
in red when the
projector is on.
is open.
in red even when the lamp
unit cover is securel
installed, contact your
nearest Sharp Authorized
Projector Dealer or Service
Center (see page 62) for
advice.
Info
• If the temperature warning indicator illuminates, and the projector enters standby mode, follow the
possible solutions above and then wait until the projector has cooled down completely before plug-
ging in the power cord and turning the power back on. (At least 10 minutes.)
• If the power is turned off for a brief moment due to power outage or some other cause while using
the projector, and the power supply recovers immediately after that, the lamp indicator will illumi-
nate in red and the lamp may not be lit. In this case, unplug the power cord from the AC outlet,
replace the power cord in the AC outlet and then turn the power on again.
• If you want to clean the air vents during projector operation, be sure to press SON/STANDBY on
the projector or AON/STANDBY on the remote control and put the projector into standby mode.
After the cooling fan has stopped, clean the vents.
• The cooling fan keeps the internal temperature of the projector constant and this function is con-
trolled automatically. The sound of the cooling fan may change during operation because the fan
speed may change and this is not a malfunction.
• Do not unplug the power cord after the projector has entered standby mode and while the cooling
fan is running. The cooling fan runs for about 90 seconds.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Regarding the Lamp
Lamp
■ It is recommended that the lamp (sold separately) be replaced when the remaining lamp life becomes
5% or less, or when you notice a significant deterioration in the picture and color quality. The lamp life
(percentage) can be checked with the on-screen display. (see page 50)
■ Purchase a replacement lamp of type AN-XR1LP from your place of purchase, nearest Sharp Projector
Dealer or Service Center.
IMPORTANT NOTE TO U.S. CUSTOMERS:
The lamp included with this projector is backed by a 90-day parts and labor limited
warranty. All service of this projector under warranty, including lamp replacement,
must be obtained through a Sharp Authorized Projector Dealer or Service Center.
For the name of the nearest Sharp Authorized Projector Dealer or Service Center,
please call toll-free: 1-888-GO-SHARP (1-888-467-4277).
Hg LAMP CONTAINS MERCURY For State Lamp Disposal
Information
U.S.A. ONLY
Caution Concerning the Lamp
■ This projector utilizes a pressurized mercury lamp. A loud sound may indicate lamp failure. Lamp
failure can be attributed to numerous sources such as: excessive shock, improper cooling, surface
scratches or deterioration of the lamp due to a lapse of usage time.
The period of time up to failure largely varies depending on the individual lamp and/or the condition
and the frequency of use. It is important to note that failure can often result in the bulb cracking.
■ When the lamp replacement indicator and on-screen display icon are illuminated, it is recommended
that the lamp be replaced with a new one immediately, even if the lamp appears to be operating
normally.
■ Should the lamp break, there is also a possibility that glass particles may spread inside of the
projector. In such a case, it is recommended you contact your nearest Sharp Authorized Projector
Dealer or Service Center to assure safe operation.
■ Should the lamp break, the glass particles may spread inside the lamp cage or gas contained in the
lamp may be vented into the room from the exhaust vent. Because the gas in this lamp includes
mercury, ventilate the room well if the lamp breaks and avoid all exposure to the released gas. In case
of exposure to the gas, consult a doctor as soon as possible.
Replacing the Lamp
• Do not remove the lamp unit from the projector right after use. The lamp will be very hot and may
cause burn or injury.
■ Carefully change the lamp by following the instructions described in this section. * If you wish,
you may have the lamp replaced at your nearest Sharp Authorized Projector Dealer or Service
Center.
*
If the new lamp does not light after replacement, take your projector to the nearest Sharp Authorized
Projector Dealer or Service Center for repair.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Regarding the Lamp (Continued)
Removing and Installing the
Lamp Unit
Info
Optional
accessory
Lamp unit
AN-XR1LP
• Be sure to remove the lamp unit using the
handle. Be sure not to touch the glass surface
of the lamp unit or the inside of the projector.
• To avoid injury to yourself and damage to the
lamp, be sure to carefully follow the steps
below.
• Do not loosen other screws except for the
lamp unit cover and lamp unit.
Press SON/STANDBY on the pro-
1
jector or AON/STANDBY on the
remote control to put the projector
into standby mode.
• Wait until the cooling fan stops.
ON/STANDBY button
Warning!
• Do not remove the lamp unit from the
projector right after use. The lamp and
parts around the lamp will be very hot
and may cause burns or injury.
Disconnect the power cord.
• Unplug the power cord from the AC
socket.
• Leave the lamp until it has fully cooled
down (about 1 hour).
2
3
AC socket
Remove the lamp unit cover.
• Turn the projector over. Loosen the user
service screw (1) that secures the lamp
unit cover. Remove the lamp unit cover
(2).
User service screw
(for lamp unit cover)
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Handle
Remove the lamp unit.
4
• Loosen the securing screws from the
lamp unit. Hold the lamp unit by the
handle and pull it in the direction of the
arrow. At this time, keep the lamp
unithorizontal and do not tilt it.
Insert the new lamp unit.
• Press the lamp unit firmly into the lamp
unit compartment. Fasten the securing
screws.
5
6
Securing screws
Replace the lamp unit cover.
• Align the tab on the lamp unit cover
(1)and place it while pressing the tab
(2) to close it. Then tighten the user ser-
vice screw (3) to secure the lamp unit
cover.
Info
• If the lamp unit and lamp unit cover are
not correctly installed, the power will not
turn on, even if the power cord is con-
nected to the projector.
User service
screw (for
lamp unit
cover)
Resetting the Lamp Timer
Reset the lamp timer after replacing the lamp.
Info
• Make sure to reset the lamp timer only when
replacing the lamp. If you reset the lamp timer
and continue to use the same lamp, this may
cause the lamp to become damaged or ex-
plode.
AC socket
ENTER button
ON/STANDBY button
Connect the power cord.
1
• Plug the power cord into the AC socket
of the projector.
Reset the lamp timer.
2
• While simultaneously holding down
UMENU, TENTER and Y on the pro-
jector, press and SON/STANDBY on the
projector.
Y button
MENU button
• “LAMP 0000H” is displayed, indicating
that the lamp timer is reset.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Pin Assignments
INPUT 1 RGB Signal Terminal: 15-pin Mini D-sub female connector
RGB Input
Component Input
1. PR (CR)
1. Video input (red)
2. Video input (green/sync on green) 2.
3. Video input (blue)
4. Not connected
5. Not connected
6. Earth (red)
Y
3. PB (CB)
4. Not connected
5. Not connected
6. Earth (PR)
15
5
11
1
7. Earth (green/sync on green)
8. Earth (blue)
7. Earth (Y)
8. Earth (PB)
9. Not connected
9. Not connected
10. Not connected
11. Not connected
12. Not connected
13. Not connected
14. Not connected
15. Not connected
10. GND
11. Not connected
6
10
12. Bi-directional data
13. Horizontal sync signal: TTL level
14. Vertical sync signal: TTL level
15. Data clock
USB Terminal: 4-pin B-type USB female connector
1 2
Signal
Signal name
1. SG
GND
2. USB+
3. VCC
4. USB–
USB data+
USB power
USB data–
3 4
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer Compatibility Chart
Computer
• Multiple signal support
• Compatible with the signals below in
Horizontal Frequency: 15-70 kHz,
Vertical Frequency: 45-85 Hz,
Pixel Clock: 12-108 MHz
intelligent compression
XR-1X: SXGA, SXGA+
XR-1S: XGA, SXGA, SXGA+
• Intelligent Compression and Expansion
System resizing technology
Sync signal:Compatible with TTL level
• Compatible with sync on green signal
The following is a list of modes that conform to VESA. However, this projector supports other
signals that are not VESA standards.
Horizontal Frequency Vertical Frequency
Display
PC/MAC
Resolution
VESA Standard
(kHz)
(Hz)
XR-1X
XR-1S
27.0
31.5
37.5
27.0
31.5
37.9
27.0
31.5
27.0
31.5
37.9
26.2
31.5
34.7
37.9
37.5
43.3
31.4
35.1
37.9
46.6
48.1
46.9
53.7
40.3
48.4
56.5
60.0
68.7
55.0
66.2
67.5
64.0
64.0
34.9
37.8
49.7
60.2
68.7
60
70
85
60
70
85
60
70
60
70
85
50
60
70
72
75
85
50
56
60
70
72
75
85
50
60
70
75
85
60
70
75
60
60
67
60
75
75
75
640 × 350
✔
✔
640 × 400
720 × 350
720 × 400
Upscale
VGA
✔
✔
Upscale
640 × 480
✔
✔
✔
PC
✔
✔
True
SVGA
800 × 600
✔
✔
✔
✔
✔
✔
✔
XGA 1,024 × 768
True
Intelligent
Compression
1,152 × 864
SXGA
Intelligent
Compression
✔
✔
1,280 × 1,024
1,400 × 1,050
640 × 480
SXGA+
VGA
MAC 13"
MAC 16"
Upscale
True
800 × 600
Upscale
SVGA
832 × 624
Intelligent
Compression
1,024 × 768
1,152 × 870
MAC 19"
MAC 21"
XGA
SXGA
True
Intelligent Compression
Note
• This projector may not be able to display images from notebook computers in simultaneous (CRT/LCD) mode. Should this
occur, turn off the LCD display on the notebook computer and output the display data in “CRT only” mode. Details on how to
change display modes can be found in your notebook computer’s operation manual.
• When this projector receives 640K350 VESA format VGA signals, “640K400” appears on the screen.
DTV
Signal
480I
Horizontal Frequency (kHz) Vertical Frequency (Hz)
15.7
31.5
33.8
15.6
31.3
45.0
28.1
33.8
28.1
33.8
60
60
60
50
50
60
50
60
50
60
480P
540P
576I
576P
720P
1035I
1035I
1080I
1080I
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Check
Page
•
•
•
•
•
•
Projector power cord is not plugged into the wall outlet.
Power to the external connected devices is off.
The selected input mode is wrong.
25
–
29
Cables incorrectly connected to the projector.
Remote control battery has run out.
23, 24, 25
14, 15
23
External output has not been set when connecting notebook
computer.
No picture and no sound
or projector does not
start.
•
•
•
The lamp unit cover is not installed correctly.
Cables incorrectly connected to the projector.
“Bright” is set to minimum position.
56, 57
23, 24, 25
40
Sound is heard but no
picture appears (or picture
is dark).
•
Image adjustments are incorrectly set.
40
51
(Video Input only)
•
Video input system is incorrectly set.
Color is faded or poor.
•
•
Adjust the focus.
27
19
The projection distance exceeds the focus range.
(Computer Input only)
•
•
•
Perform “Fine Sync” Adjustments (“Clock” Adjustment)
Perform “Fine Sync” Adjustments (“Phase” Adjustment)
Noise may appear depending on the computer.
51
51
–
Picture is blurred;
noise appears.
•
•
Cables incorrectly connected to the projector.
Volume is set to minimum.
23, 24, 25
29
Picture appears but no
sound is heard.
•
•
If the picture is normal, the sound is due to cabinet shrinkage
caused by room temperature changes. This will not affect operation
or performance.
An unusual sound is
occasionally heard from
the cabinet.
Maintenance indicator on
the projector illuminates
or blinks in red.
–
See “Maintenance Indicators”.
54
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Check
Page
51
Picture is green on
INPUT 1 COMPONENT.
•
•
Change the input signal type setting.
Picture is pink (no green)
on INPUT 1 RGB.
Picture is too bright and
whitish.
Image adjustments are incorrectly set.
40
–
The cooling fan becomes • When temperature inside the projector increases, the cooling fan
noisy.
runs faster.
The lamp does not light
up even after the
projector turns on.
•
The lamp indicator is illuminating in red.
Replace the lamp.
53
The lamp suddenly turns
off during projection
The image sometimes
flickers.
•
Cables incorrectly connected to the projector or the connected
equipment works improperly.
If this happens frequently, replace the lamp.
23, 24,
25, 51, 56
•
•
The lamp needs much
time to turn on.
The lamp will eventually need to be changed.
While the remaining lamp life draws to a close, replace the lamp.
56
Picture is dark.
This unit is equipped with a microprocessor. Its performance could be adversely affected by incorrect operation
or interference. If this should happen, unplug the Unit and plug it in again after more than 30 seconds.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
For SHARP Assistance
If you encounter any problems during setup or operation of this projector, first
refer to the“Troubleshooting”section on pages 60 and 61. If this operation manual
does not answer your question, please contact the SHARP Service departments
listed below.
U.S.A.
Sharp Electronics Corporation
Benelux
SHARP Electronics Benelux BV
0900-SHARPCE (0900-7427723)
Nederland
1-888-GO-SHARP (1-888-467-4277)
9900-0159 Belgium
Canada
Mexico
Sharp Electronics of Canada Ltd.
(905) 568-7140
Australia
Sharp Corporation of Australia Pty.
Ltd.
1300-135-022
Sharp Electronics Corporation
Mexico Branch
(525) 716-9000
New Zealand Sharp Corporation of New Zealand
(09) 634-2059, (09) 636-6972
Latin America Sharp Electronics Corp. Latin
American Group
Singapore
Hong Kong
Taiwan
Sharp-Roxy Sales (S) Pte. Ltd.
65-226-6556
(305) 264-2277
Germany
U.K.
Sharp Electronics (Europe) GMBH
01805-234675
Sharp-Roxy (HK) Ltd.
(852) 2410-2623
Sharp Electronics (U.K.) Ltd.
0161-205-2333
Sharp Corporation (Taiwan)
0800-025111
Italy
Sharp Electronics (Italy) S.P.A.
(39) 02-89595-1
Malaysia
U.A.E.
Sharp-Roxy Sales & Service Co.
(60) 3-5125678
Sharp Middle East Fze
971-4-81-5311
France
Sharp Electronics France
01 49 90 35 40
Thailand
Korea
Sharp Thebnakorn Co. Ltd.
02-236-0170
Spain
Sharp Electronica Espana, S.A.
93 5819700
Sharp Electronics Incorporated of
Korea
(82) 2-3660-2002
Switzerland
Sweden
Austria
Sharp Electronics (Schweiz) AG
0041 1 846 63 11
India
Sharp Business Systems (India)
Limited
(91) 11- 6431313
Sharp Electronics ( Nordic ) AB
(46) 8 6343600
Sharp Electronics (Europe) GMBH
Branch Office Austria
0043 1 727 19 123
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Product type Projector
Model XR-1X / XR-1S
Video system NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/DTV480I/DTV480P/
DTV540P/DTV576I/DTV576P/DTV720P/DTV1035I/DTV1080I/DTV1080I-50
Display method Single Chip Digital Micromirror DeviceTM (DMDTM) by Texas Instruments
DMD panel Panel size: [XR-1X] 0.7" (17.5 mm) (10.5 [H] × 14.0 [W] mm), 1 chip XGA DMD
[XR-1S] 0.55" (13.7 mm) (8.2 [H] × 10.9 [W] mm), 1 chip SVGA DMD
No. of dots: [XR-1X] 786,432 dots (1,024 [H] × 768 [V])
[XR-1S] 480,000 dots (800 [H] × 600 [V])
Lens [XR-1X] 1–1.16 × zoom lens, F2.80–3.10, f = 25.8–30.0 mm
[XR-1S] 1–1.16 × zoom lens, F2.60–2.84, f = 19.3–22.6 mm
Projection lamp 150 W DC lamp
Component input signal 15-pin mini D-sub connector
(INPUT1) Y: 1.0 Vp-p, sync negative, 75 Ω terminated
PB: 0.7 Vp-p, 75 Ω terminated
PR: 0.7 Vp-p, 75 Ω terminated
Horizontal resolution [XR-1X] 700 TV lines (DTV720P)
[XR-1S] 520 TV lines (DTV720P)
Computer RGB input 15-pin mini D-sub connector
signal (INPUT 1) RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75 Ω terminated
HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
VERTICAL SYNC. SIGNAL: Same as above
S-video input signal 4-pin mini DIN connector
(INPUT 2) Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated
C (chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated
Video input signal RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 Ω
(INPUT 3) terminated
Pixel clock 12–108 MHz
Vertical frequency 45–85 Hz
Horizontal frequency 15–70 kHz
Audio input signal ø3.5 mm minijack: AUDIO, 0.5 Vrms, more than 22 kΩ (stereo)
Speaker system 2.8 cm round × 1
Rated voltage AC 100–240 V
Input current 2.0 A
Rated frequency 50/60 Hz
Power consumption 195 W (Standard mode)/177 W (Eco/Quiet mode “On”) with AC 100 V
190 W (Standard mode)/167 W (Eco/Quiet mode “On”) with AC 240 V
Power consumption (standby) 4 W (AC 100 V) – 5 W (AC 240 V)
Heat dissipation 730 BTU/hour (Standard mode)/660 BTU/hour (Eco/Quiet mode “On”) with AC 100 V
710 BTU/hour (Standard mode)/630 BTU/hour (Eco/Quiet mode “On”) with AC 240 V
Operating temperature 41°F to 95°F (+5°C to +35°C)
Storage temperature –4°F to 140°F (–20°C to +60°C)
Cabinet Plastic
I/R carrier frequency 38 kHz
Dimensions (approx.) 9 47/64" × 2 17/32" × 4 13/16" (247 (W) × 64 (H) × 122 (D) mm) (main body only)
9 47/64" × 2 23/32" × 4 13/16" (247 (W) × 69 (H) × 122 (D) mm) (including adjustment
foot and projecting parts)
Weight (approx.) 3.20 lbs. (1.45 kg)
Supplied accessories Remote control, Lithium battery, Power cord for U.S., Canada etc. (6', 1.8 m),
Power cord for Europe, except U.K. (6', 1.8 m), Power cord for U.K., Hong Kong
and Singapore (6', 1.8 m), Power cord for Australia, New Zealand and Oceania
(6', 1.8 m), RGB/USB cable (6', 1.8 m), Cable tie × 2, Soft case, Projector
manual CD-ROM, Operation manual
Replacement parts Lamp unit (Lamp/cage module) (AN-XR1LP), Remote control
(RRMCGA256WJSA), Lithium battery, Power cord for U.S., Canada etc.
(QACCDA029WJPZ), Power cord for Europe, except U.K. (QACCVA006WJPZ),
Power cord for U.K., Hong Kong and Singapore (QACCBA015WJPZ), Power
cord for Australia, New Zealand and Oceania (QACCLA024WJPZ), RGB/USB
cable (QCNWGA047WJPZ), Cable tie (UBNDTA015WJZZ), Soft case
(GCASNA011WJZZ), Projector manual CD-ROM (UDSKAA045WJN1), Opera-
tion manual (TINS-B148WJN1)
As a part of policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice.
The performance specification figures indicated are nominal values of production
units. There may be some deviations from these values in individual units.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Dimensions
Units: inches (mm)
9 47/64 (247)
XR-1X
2 7/32 (56)
6 11/32 (161)
1 15/16 (49)
2 43/64 (67.5)
7 5/64 (179.5)
XR-1S
2 7/32 (56)
6 11/32 (161)
1 15/16 (49)
2 43/64 (67.5)
7 5/64 (179.5)
4 47/64 (120)
8 9/32 (210)
47/64 (18.5)
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
AC socket.................................................. 25 Lamp Timer (Life) ..................................... 50
Accessories .............................................. 11 Lamp unit .................................................. 56
Adjustment buttons ................................... 36 Language
Adjust vertical noise ........................... 35, 51
(on-screen display language)................. 46
Aspect ratio ............................................... 30 Lithium Battery.................................... 14, 15
AUDIO INPUT terminal................. 23, 24, 25
Auto Keystone Correction ........................ 44 MENU/HELP button............................ 36, 51
Auto Power Off ......................................... 48 MOUSE/Adjustment buttons .................... 33
Auto Search .............................................. 47 Mouse function ......................................... 33
Auto Sync
NORMAL............................................. 30, 31
(Auto Sync adjustment).............. 32, 35, 51
AUTO SYNC button.................................. 32
AV MUTE button ....................................... 29
ON/STANDBY button ............................... 26
Optional accessories ................................ 11
OSD Display ............................................. 44
Background............................................... 45
Blue ........................................................... 40
BORDER............................................. 30, 31
Bright......................................................... 40
Bright Boost .............................................. 41
PDF ........................................................... 10
Phase ........................................................ 51
Picture Adjustment.................................... 40
Picture Mode............................................. 40
Power cord................................................ 25
PRJ - ADJ ................................................. 47
PRJ Mode ................................................. 46
Progressive ............................................... 42
Clock ......................................................... 51
CLR Temp (Color Temperature) ............... 41
Color ......................................................... 40
Contrast .................................................... 40
R CLICK/RETURN button ........................ 33
Rear adjustment foot ................................ 28
Red ........................................................... 40
Remote control ......................................... 14
Eco/Quiet Mode ........................................ 47
ENTER button........................................... 36
Exhaust vent ............................................. 13
Fine Sync .................................................. 51 Remote control sensor ............................. 15
Focus ring ................................................. 27 Replacing the lamp ................................... 55
FREEZE button ........................................ 32 Resize ....................................................... 43
Front adjustment foot ............................... 28 RESIZE button .......................................... 30
RETURN button ........................................ 37
Guide LEDs .............................................. 48
RGB/USB cable ........................................ 23
H-Pos .................................................. 35, 51
SCR - ADJ ................................................ 43
HEIGHT ADJUST button .......................... 28
Screen Size and Projection Distance (XR-1S) ... 20
Help........................................................... 51
Screen Size and Projection Distance (XR-1X) ... 19
Setup Guide .............................................. 27
Image shift ................................................ 43
Sharp ........................................................ 40
Soft case ................................................... 11
sRGB ........................................................ 42
STRETCH ........................................... 30, 31
Supplied accessories ............................... 11
System Lock ............................................. 49
INPUT 1 terminal ................................ 23, 24
INPUT 1 – 3 modes .................................. 29
INPUT 2 terminal ...................................... 24
INPUT 3 terminal ...................................... 25
INPUT button ............................................ 29
Intake vent .......................................... 13, 52
Temperature warning indicator ................. 53
Tint ............................................................ 40
Kensington Security
Standard connector ................................ 13
Keycode .................................................... 49
Keystone Correction ................................. 44
USB terminal............................................. 23
Video System............................................ 35
Volume buttons ......................................... 29
V-Pos .................................................. 35, 51
L CLICK/ENTER button ............................ 33
Lamp ......................................................... 55
Lamp indicator .......................................... 53
Zoom knob ................................................ 28
65
Download from Www.Somanuals.com. All Manuals Search And Download.
SHARP CORPORATION
Download from Www.Somanuals.com. All Manuals Search And Download.
|