OPERATION MANUAL
MODEL
-
XG NV5XU
LCD PROJECTOR
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Important Information
Useful Features
Important Safeguards ……………………………
Usage Guidelines …………………………………
Outstanding Features ……………………………
How to Access the PDF Operation Manuals
(for Windows and Macintosh) ………………
Supplied Accessories ……………………………
For SHARP Assistance (U.S.A. only) …………
Part Names …………………………………………
Remote Control/Mouse Receiver
3
4
5
Digital Image Magnification and Reduction … 29
Black Screen Function …………………………… 30
On-screen Display Override Function ………… 30
Fit to Screen Function …………………………… 31
I/P Conversion (VIDEO mode only) …………… 31
Checking the Input Signal and
Lamp Usage Time …………………………… 32
Setting a Background Image …………………… 32
Selecting a Startup Image ……………………… 33
Freeze Function …………………………………… 33
Reverse/Invert Image Function ………………… 34
Using the Presentation Tools …………………… 35
Checking the Adjustment Status ……………… 36
Automatic Power Shutoff Function …………… 36
6
7
7
8
Positioning …………………………………… 10
Operating the Wireless Mouse from
the “Power” Remote Control ……………… 11
Setup & Connections
Setting Up the Projector and Screen ………… 12
Standard Setup (Front Projection) …………… 12
Reversed Image Setup ………………………… 12
Ceiling-mount Setup …………………………… 13
Adjusting the Height of the Image …………… 13
Height of Image ………………………………… 13
Using the Adjustment Foot …………………… 14
Digital Keystone Correction …………………… 14
Connecting the Projector ……………………… 15
Connecting the Projector to a Computer …… 15
“Plug and Play” Function ……………………… 17
Using the Remote Mouse Receiver and
Maintenance & Troubleshooting
Air Filter Maintenance …………………………… 37
Lamp/Maintenance Indicators ………………… 38
Replacing the Projection Lamp ………………… 39
Using the Kensington Lock …………………… 40
Troubleshooting …………………………………… 40
Appendix
Transporting the Projector ……………………… 41
Connection Pin Assignments…………………… 42
RS-232C Port Specifications …………………… 42
Input Signals (Recommended Timing)………… 44
Specifications ……………………………………… 45
Dimensions ………………………………………… 46
Guide to Effective Presentations ……………… 47
Glossary …………………………………………… 51
Index ………………………………………………… 52
RS-232C Port ……………………………… 17
Connecting the Projector to
Video Equipment …………………………… 17
Operation
Basic Operations ………………………………… 18
Connect the Power Cord ……………………… 18
Turn on the Main Power ……………………… 18
Turn on the Lamp Power ……………………… 18
Adjusting Focus ………………………………… 18
Adjusting Zoom ………………………………… 18
Selecting and Checking the Input Mode …… 19
Adjusting the Volume ………………………… 19
Turning off the Power ………………………… 19
Using the GUI (Graphical User Interface)
Menu Screens ………………………………… 20
Using IrCOM for Wireless Presentations……… 22
Selecting the On-screen Display Language … 23
Selecting the Video Input System Mode
(VIDEO mode only) …………………………… 23
Picture Adjustments ……………………………… 24
Audio Adjustments ……………………………… 25
Computer Image Adjustments ………………… 26
Auto Sync Adjustment ………………………… 27
Auto Sync Display Function…………………… 27
Saving and Selecting Adjustment Settings … 28
Mode Adjustment ……………………………… 28
E-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safeguards
Electrical energy can perform many useful functions. This product has been engineered and manufactured to ensure your
personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order not to
defeat the safeguards incorporated into this LCD Projector, observe the following basic rules for its installation, use and
servicing. For your own protection and reliable usage of your LCD Projector, please be sure to read these “Important Safe-
guards” carefully before use.
1. Read Instructions—All the safety and operating instructions should be read before the product is operated.
2. Retain Instructions—The safety and operating instructions should be retained for future reference.
3. Heed Warnings—All warnings on the product and in the operating instructions should be adhered to.
4. Follow Instructions—All operating and use instructions should be followed.
5. Cleaning—Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use
a damp cloth for cleaning.
6. Attachments—Do not use attachments not recommended by the product manufacturer as they may cause hazards.
7. Water and Moisture—Do not use this product near water – for example, near a bathtub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a swimming pool; and the like.
8. Accessories—Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall,
causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should
follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.
9. A product and cart combination should be moved with care. Quick stops, excessive force, and
uneven surfaces may cause the product and cart combination to overturn.
10. Ventilation—Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product
and to protect it from overheating. The openings should never be covered or blocked by placing the product on a bed,
sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or
rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.
11. Power Sources—This product should be operated only from the type of power source indicated on the marking label.
If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For
products intended to operate from battery power, or other sources, refer to the operating instructions.
12. Grounding or Polarization—This product is equipped with a three-wire grounding-type plug, a plug having a third
(grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to
insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose
of the grounding-type plug.
13. Power-Cord Protection—Power-supply cords should be routed so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the
point where they exit from the product.
14. Lightning—For added protection for this product during a lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and disconnect the cable system. This will prevent damage to the
product due to lightning and power-line surges.
15. Overloading—Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a
risk of fire or electric shock.
16. Object and Liquid Entry—Never push objects of any kind into this product through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
17. Servicing—Do not attempt to service this product yourself as opening or removing covers may expose you to danger-
ous voltage or other hazards. Refer all servicing to qualified service personnel.
18. Damage Requiring Service—Unplug this product from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
a. If the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating instructions. Adjust only those controls that
are covered by the operating instructions, as an improper adjustment of other controls may result in damage and
will often require extensive work by a qualified technician to restore the product to normal operation.
e. If the product has been dropped or damaged in any way.
f. If the product exhibits a distinct change in performance—this indicates a need for service.
19. Replacement Parts—When replacement parts are required, be sure the service technician has used replacement
parts specified by the manufacturer or with the same characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock, or other hazards.
20. Safety Check—Upon completion of any service or repairs to this product, ask the service technician to perform safety
checks to determine that the product is in proper operating condition.
21. Wall or Ceiling Mounting—This product should be mounted to a wall or ceiling only as recommended by the manu-
facturer.
22. Heat—This product should be situated away from heat sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
E-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Usage Guidelines
"COMPLIES WITH 21 CFR SUBCHAPTER J"
SHARP ELECTRONICS CORPORATION
SHARP PLAZA, MAHWAH, NEW JERSEY 07430
Cautions Concerning the Laser Pointer
CAUTION
TEL : 1-800-BE-SHARP
U.S.A. ONLY
LASER RADIATION-
REMOTE CONTROL
DO NOT STARE INTO BEAM
The laser pointer on the “Power” remote control emits a laser beam from the
laser pointer window. This is a Class II laser which may impair your sight if
directed into the eyes. The three marks shown on the left are caution labels
for the laser beam.
• Do not look into the laser pointer window or shine the laser beam on yourself or
others. (The laser beam used in this product is harmless when directed onto
the skin. However, be careful not to project the beam directly into the eyes.)
• Always use the laser pointer at temperatures between 41°F and 104°F (
ם 5°C and
ם 40°C). MODEL NO. G1462CESA
DC6V (1.5VX4PCS.)
MADE IN JAPAN
:
WAVE LENGTH 670nm
:
MAX. OUTPUT : 1mW
CLASS II LASER PRODUCT FABRIQUÉ AU JAPON
AVOID EXPOSURE-LASER
RADIATION IS EMITTED
FROM THIS APERTURE.
• Use of controls or adjustments, or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
Laser pointer
window
Cautions Concerning the Setup of the Projector
104˚F
(
ם 40˚C) For minimal servicing and to maintain high image quality, SHARP recommends
that this projector be installed in an area free from humidity, dust and cigarette
smoke. When the projector is subjected to these environments, the lens and
filter must be cleaned more often. Periodically the filter should be replaced
and the projector should be cleaned internally. As long as the projector is
properly maintained in this manner, use in these environments will not reduce
the overall operation life. Please note that all internal cleaning must be
performed by an Authorized Sharp Industrial LCD Products Dealer or Service
Center.
41˚F
(
ם 5˚C) Notes on Operation
• The exhaust vent, the lamp cage cover and adjacent areas may be extremely
hot during projector operation. To prevent injury, do not touch these areas until
they have sufficiently cooled.
• Allow at least 4 inches (10 cm) of space between the cooling fan (exhaust vent)
and the nearest wall or obstruction.
• If the cooling fan becomes obstructed, a protection device will automatically
turn off the projector lamp. This does not indicate a malfunction. Remove the
projector power cord from the wall outlet and wait at least 10 minutes. Then
turn on the power by plugging the power cord back in. This will return the
projector to the normal operating condition.
Temperature Monitor Function
If the projector starts to overheat due to setup problems or a dirty air filter, “TEMP.”
and “ ” will flash in the lower-left corner of the picture. If the temperature continues
to rise, the lamp will turn off, the TEMPERATURE WARNING indicator on the
projector will flash, and after a 90-second cooling-off period the power will shut
off. Refer to “Lamp/Maintenance Indicators” on page 38, for details.
• The cooling fan regulates the internal temperature, and its performance is
automatically controlled. The sound of the fan may change during projector operation
due to changes in the fan speed.
Lamp Monitor Function
When the projector is turned on after the lamp has been used for 1,900 hours,
“LAMP” and “ ” will flash in the lower-left corner of the picture to advise you to
replace the lamp. See pages 39 and 40 for lamp replacement. If the lamp has
been used for 2,000 hours, the projector power will automatically turn off and the
projector will enter standby mode. Refer to “Lamp/Maintenance Indicators” on
page 38, for details.
E-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Outstanding Features
1. WIRELESS PRESENTATIONS WITH IrCOM
The IrCOM function allows for wireless transmission of digital images via infrared communication, from a PC,
handheld PC or digital camera to the projector.
2. ADVANCED COMPATIBILITY WITH HIGH-END WORKSTATIONS AND PCS
Compatible with up to 100 Hz vertical refresh rate, Sync on Green and Composite Sync signals for use with a wide
variety of high-end PCs and Workstations.
3. XGA RESOLUTION FOR HIGH RESOLUTION PRESENTATIONS
With XGA (1,024
ן 768) resolution, this projector can display very detailed presentation information. 4. INTELLIGENT COMPRESSION AND EXPANSION
By using intelligent resizing technology, this projector can display higher and lower resolution images in detail
without compromising quality.
5. UXGA COMPATIBLE
The projector can display compressed UXGA (1,600
ן 1,200) images. 6. DIGITAL KEYSTONE CORRECTION
Digitally adjusts an image that is projected at an angle while maintaining image quality and brightness.
7. EASY-TO-USE GRAPHIC USER INTERFACE
A multi-color, icon based menu system allows for simple image adjustments.
8. AUTO SYNC TECHNOLOGY FOR AUTOMATIC IMAGE PERFECTION
Automatically makes any necessary adjustments for perfectly synced computer images.
9. BUILT-IN PRESENTATION TOOLS
A variety of helpful presentation utilities are incorporated to enhance presentations. These include “Stamp” functions,
“Break Timer”, and “Digital Enlarge”.
10. USER-FRIENDLY DESIGN
The two-color design along with an intuitive User Interface makes this projector very easy to set up and adjust.
11. CUSTOMIZABLE STARTUP SCREEN
Allows you to load a custom startup image (i.e. your company logo) to be displayed while the projector is warming
up.
E-5
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Access the PDF Operation Manuals (for Windows and Macintosh)
PDF operation manuals in all languages are included in the CD-ROM. To utilize these manuals, you need to install
Adobe Acrobat Reader on your PC (Windows or Macintosh). If you have not installed Acrobat Reader yet, you can
To Install Acrobat Reader (English version) from the CD-ROM
For Windows:
For Macintosh:
1 Insert the CD-ROM in the CD-ROM drive.
2 Double click on the “My Computer” icon.
3 Double click on the “CD-ROM” drive.
4 Double click on the “manuals” folder.
5 Double click on the “acrobat” folder.
6 Double click on the “windows” folder.
7 Double click on the installation program and follow
the instructions on the screen.
1 Insert the CD-ROM in the CD-ROM drive.
2 Double click on the “CD-ROM” icon.
3 Double click on the “manuals” folder.
4 Double click on the “acrobat” folder.
5 Double click on the “mac” folder.
6 Double click on the installation program and follow
the instructions on the screen.
For other operating systems:
Please download Acrobat Reader from the Internet (http://www.adobe.com).
For other languages:
If you prefer using Acrobat Reader for other languages, please download the appropriate version from the Internet.
(Please note that you do not have to have Acrobat Reader in your own language. You can read any pdf file using
the English version of Acrobat Reader.)
Accessing the PDF Manuals
For Windows:
For Macintosh:
1 Insert the CD-ROM in the CD-ROM drive.
2 Double click on the “My Computer” icon.
3 Double click on the “CD-ROM” drive.
4 Double click on the “manuals” folder.
5 Double click on the “nv5” folder to access the
projector manuals.
1 Insert the CD-ROM in the CD-ROM drive.
2 Double click on the “CD-ROM” icon.
3 Double click on the “manuals” folder.
4 Double click on the “acrobat” folder.
5 Double click on the “nv5” folder to access the
projector manuals.
Double click on the “saps” folder to access the
Sharp Advanced Presentation Software manual.
6 Double click on the language (name of the folder)
that you want to view.
Double click on the “saps” folder to access the
Sharp Advanced Presentation Software manual.
6 Double click on the language (name of the folder)
that you want to view.
7 Double click on the pdf file.
7 Double click on the pdf file.
• If the desired pdf file cannot be opened by double clicking the mouse, please start Acrobat Reader first, then specify the
desired file using the “File”, “Open” menu.
CD-ROM Structure
Root
First folder
Second folder/programs
nv5
Third folder
american
french
PDF files
CD-ROM
manuals
nv5us.pdf
nv5f.pdf
spanish
american
french
nv5sp.pdf
saps1us.pdf
saps1f.pdf
saps1sp.pdf
saps
spanish
windows
mac
acrobat
Acrobat Reader (English) installation program
Acrobat Reader (English) installation program
saps
saps programs
nv5demo
E-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Supplied Accessories
Simple presentation
remote control
RRMCG1480CESA
“Power” remote control
RRMCG1470CESA
Four AA size batteries
UBATU0025GEZZ
Two AAA size batteries
UBATU0026GEZZ
Power cord
CACCU5013CE01
Computer cable
QCNW-5108CEZZ
Computer audio cable
QCNW-4870CEZZ
Macintosh adaptor
QPLGJ1512CEZZ
Mouse control cable for IBM
PS/2
Mouse control serial cable
QCNW-5112CEZZ
Mouse control cable for Mac
QCNW-5114CEZZ
Remote mouse receiver
RUNTK0648CEZZ
QCNW-5113CEZZ
Extra air filter
PFILD0076CEZZ
Lens cap
GCOVH1307CESA
Carrying bag
GCASN0001CESA
CD-ROM
UDSKA0001CE01
Quick Reference to XG-NV5X
Sharp Advanced
Presentation Software
operation manual
TINS-6601CEZZ
Sharp Advanced
Presentation Software
quick reference
LCD projector
operation manual
TINS-6583CEZZ
LCD projector
quick reference
TINS-6598CEZZ
TINS-6676CEZZ
For SHARP Assistance (U.S.A. only)
If you encounter any problems during setup or operation of this projector, first refer to the “Troubleshooting”
section on page 40. If this operation manual does not answer your question, please call toll free 1-800-BE-SHARP
(1-800-237-4277) for further assistance. Or, send us an e-mail at lcdsupport@sharplcd.com .
E-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names
1 POWER indicator [pp. 18, 19, 38]
Projector
2 POWER buttons (ON/OFF)
[pp. 18, 19, 39]
Front View
3 BLACK SCREEN button [p. 30]
8
4 INPUT SELECT button
[pp. 19, 26]
1
2
9
0
5 FREEZE button [p. 33]
6 KEYSTONE button [p. 14]
7 ADJUSTMENT buttons (∂/ƒ/
q
w
ß / ©) [pp. 14, 20–36, 40]
3
4
8 LAMP REPLACEMENT indicator
[pp. 18, 19, 38]
e
r
9 TEMPERATURE WARNING indi-
cator [pp. 4, 38]
5
0 VOLUME buttons (
ם /מ ) [p. 19] q MUTE button [p. 19]
w MENU button [pp. 20–36]
e IrCOM button [p. 22]
6
7
t
y
r AUTO SYNC button [pp. 26, 27]
t ENLARGE button [p. 29]
u
i
o
y ENTER button
[pp. 14, 20–36, 40]
u Zoom knob [p. 18]
i Focus knob [p. 18]
o Remote control sensor [p. 10]
p Air filter [p. 37]/Cooling fan
(Intake vent)
a
s
d
a Carrying handle [p. 41]
s Kensington Security Standard
p
connector [p. 40]
d Foot release [p. 14]
f Cooling fan (Exhaust vent)
g Remote control sensor [p. 10]
h Speaker
Side and Rear View
j Cooling fan (Intake vent)
k Air filter [p. 37]
l COMPUTER INPUT 1 port
(HD-15) [pp. 15, 16, 42]
g
; RS-232C port (9-pin D-sub)
[pp. 15, 17, 42, 43]
J AUDIO INPUT terminals: RCA
h
j
k
[p. 17]
f
K AC socket
L MAIN POWER switch
[pp. 11, 18, 37, 39, 40]
: COMPUTER INPUT 2 port
(HD-15) [pp. 15, 16, 42]
a AUDIO OUTPUT terminal
l
:
(3.5 mm stereo minijack) [p. 17]
s COMPUTER AUDIO INPUT
terminal (3.5 mm stereo minijack)
[p. 15]
a
s
;
d S-VIDEO INPUT terminal: 4-pin
mini DIN [p. 17]
d
f
g
J
f IrCOM sensor [p. 22]
g VIDEO INPUT terminal: RCA
K
L
[p.17]
E-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names
“Power” Remote Control
1 MUTE button [p. 19]
Side View
Front View
2 POWER buttons (ON/OFF) [pp. 18, 19, 39]
3 BLACK SCREEN/TOOLS button [pp. 30, 35]
4 RIGHT-CLICK/ENTER button
[pp. 11, 14, 20–36]
1
9
0
u
i
VOL
ON
MUTE
5 INPUT button [pp. 19, 26]
6 FREEZE button [p. 33]
7 KEYSTONE button [p. 14]
2
3
OFF
BLACK
SCREEN LASER
MENU
TOOLS
q
w
8 MOUSE/ADJUSTMENT switch
[pp. 11, 14, 20–36, 40]
9 TRANSMISSION indicator
0 VOLUME buttons (
ם /מ ) [p. 19] q LASER POINTER/MENU button
4
R-CLICK ENTER
[pp. 11, 20–36]
INPUT
IrCOM
w MOUSE/ADJUSTMENT buttons (∂/ƒ/ß/©)
[pp. 14, 20–36]
5
6
7
e
r
t
FREEZE AUTO SYNC
e IrCOM button [p. 22]
r AUTO SYNC button [pp. 26, 27]
t ENLARGE button [p. 29]
KEYSTONE ENLARGE
Top View
MOUSE
ADJ.
8
LIGHT
y BACKLIGHT button [p. 11]
u MAIN POWER switch [p. 11]
i LEFT-CLICK (BACK) button [pp. 11, 20–36]
o Remote control signal transmitter
p Laser pointer window [p. 4]
a TRANSMISSION indicator
s MOUSE button [p. 11]
o
p
y
LCD PROJECTOR
Simple Presentation Remote Control
d RIGHT-CLICK button [p. 11]
f LEFT-CLICK button [p. 11]
Front View
Side View
a
f
s
d
E-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names
Inserting the batteries
Press in and downward
on the arrow to remove
the battery cover.
I
nsert four AA size batteries
Insert the side tabs of
the battery cover into
their slots and press the
cover in until it is
1
2
3
for the “Power” remote
control and two AAA size
batteries for the simple
presentation remote control
making sure their polarities
match the
ם and מ marks inside the battery
properly seated.
compartment.
Battery
cover
Battery
cover
Battery
compartment
Battery
cover
Battery
compartment
Battery
cover
Remote Control/Mouse Receiver Positioning
• The “Power” remote control can be used to control the projector within the ranges shown below.
• The remote mouse receiver can be used with the “Power” remote control or the simple presentation remote
control to control the mouse functions of a connected computer within the ranges shown below. (See page 15
for details.)
• The signal from the remote controls can be reflected off a screen for easy operation. However, the effective distance of the
signal may differ due to the screen material.
Controlling the Projector
Using the Wireless Mouse
Simple
presentation
“Power” remote control
23Ј (7 m)
remote control
30˚
30˚
“Power”
remote
control
30˚
45˚
30˚
45˚
30˚
20Ј (6 m)
45˚
Remote
mouse
receiver
30˚
“Power”
remote
control
E-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the Wireless Mouse from the “Power” Remote Control
When operating the
projector controls or
using the laser pointer
When operating the
wireless mouse
The “Power” remote control has the following three func-
tions:
• Operation of projector controls
• Operation of wireless mouse
MOUSE
ADJ.
MOUSE
ADJ.
• Use of laser pointer
Slide the MOUSE/ADJUSTMENT switch to the MOUSE
or ADJ. position for use of the function.
1 Connect the projector to a computer
VOL
ON
MUTE
2 2
See pages 15 and 16 for details.
OFF
2 Wireless mouse operation
BLACK
SCREEN LASER
TOOLS
MENU
1. After connecting the projector and the computer, turn
the projector on first. The computer should always be
turned on last.
5 1
4
2. Slide the MAIN POWER switch on the “Power” remote
control to ON.
5 2
R-CLICK ENTER
INPUT
IrCOM
3 Selecting the operation mode
FREEZE AUTO SYNC
KEYSTONE ENLARGE
To use the “Power” remote control as a wireless mouse, slide
the MOUSE/ADJUSTMENT switch to the MOUSE position.
MOUSE
ADJ.
MOUSE
ADJ.
LIGHT
• To use the “Power” remote control to operate the projector, slide
the MOUSE/ADJUSTMENT switch to the ADJ. position.
• The wireless mouse or RS-232C function may not operate if your
computer serial port is not correctly set up. Please refer to the
computer’s operation manual for details on setting up/installing the
correct mouse driver.
LCD PROJECTOR
4 Moving the mouse cursor
Press ∂/ƒ/ß/© on the “Power” remote control to move the
mouse cursor around the screen.
• The supplied simple presentation remote control can also be used
for wireless mouse operation.
Mouse cursor
5 Using the mouse buttons for two-button mouse
systems
The wireless mouse is configured to be used as a standard
two-button mouse (desktop mouse).
Button name
Position of MOUSE/ADJUSTMENT switch
MOUSE ADJ.
LASER POINTER/MENU LASER POINTER (GREEN) MENU (RED)
BLACK SCREEN/TOOLS BLACK SCREEN (GREEN) TOOLS (RED)
1. Use LEFT-CLICK on the back of the “Power” remote
control as the “Left Click” of a standard desktop mouse.
2. Use RIGHT-CLICK on the front of the “Power” remote
control as the “Right Click” of a standard desktop
mouse.
RIGHT-CLICK/ENTER RIGHT-CLICK (GREEN)
MOUSE/ADJUSTMENT MOUSE (NOT LIT)
ENTER (RED)
ADJUSTMENT (NOT LIT)
BACK (NOT LIT)
LEFT-CLICK/BACK
POWER ON/OFF
VOLUME
ם /מ MUTE
LEFT-CLICK (NOT LIT)
• For one-button mouse systems, use either the LEFT-CLICK or
RIGHT-CLICK button.
INPUT
Using the laser pointer
IrCOM
ON (RED)
Slide the MOUSE/ADJUSTMENT switch to the MOUSE
position, and then press LASER POINTER ( ) to activate
the laser pointer. When the button is released, the light
automatically goes off.
FREEZE
AUTO SYNCHRONIZATION
KEYSTONE
ENLARGE
• For safety reasons, the laser pointer automatically goes off after
1 minute of continuous use. To turn it on again, press LASER
POINTER ( ) one more time.
VOL
ON
MUTE
OFF
BLACK
SCREEN LASER
TOOLS
MENU
LASER POINTER button
Using the “Power” remote control in a dark
room
The “Power” remote control has a backlight function. When
BACKLIGHT is pressed, the remote buttons light up. Green
light refers to mouse operations, and red light to projector
adjustments.
R-CLICK ENTER
INPUT
IrCOM
FREEZE AUTO SYNC
KEYSTONE ENLARGE
MOUSE
ADJ.
MOUSE
ADJ.
LIGHT
• If the MAIN POWER switch on the “Power” remote control is left on
for more than 10 minutes without operation, the power will
automatically turn off. To turn the power back on, press any button
on the remote control for more than one second.
BACKLIGHT button
LCD PROJECTOR
E-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the Projector and Screen
Position the projector perpendicular to the screen with all feet flat and level to achieve optimal image.
Move the projector forward or backward if the edges of the image are distorted.
• The projector lens should be centered in the middle of the screen. If the lens center is not perpendicular to the screen, the
image will be distorted, making viewing difficult.
• Position the screen so that it is not in direct sunlight or room light. Light falling directly onto the screen washes out colors,
making viewing difficult. Close the curtains and dim the lights when setting up the screen in a sunny or bright room.
• A polarizing screen cannot be used with this projector.
Standard Setup (Front Projection)
Place the projector at the required distance from the screen according to the desired picture size (see the table
below).
Projection distance
Picture size
(diag.)
Maximum
Minimum
59Ј 2Љ (18.1 m)
39Ј 4Љ (12.0 m)
29Ј 5Љ (9.0 m)
19Ј 6Љ (6.0 m)
15Ј 6Љ (4.8 m)
11Ј 7Љ (3.6 m)
7Ј 7Љ (2.4 m)
39Ј 8Љ (12.1 m)
26Ј 5Љ (8.1 m)
19Ј 8Љ (6.0 m)
13Ј 1Љ (4.0 m)
10Ј 4Љ (3.2 m)
7Ј 8Љ (2.4 m)
5Ј 1Љ (1.6 m)
300Љ (240Љ W
ן 180Љ H) 200Љ (160Љ W
ן 120Љ H) 150Љ (120Љ W
ן 90Љ H) 100Љ (80Љ W
ן 60Љ H) 80Љ (64Љ W
ן 48Љ H) 60Љ (48Љ W
ן 36Љ H) 40Љ (32Љ W
ן 24Љ H) 90˚
The formula for picture size and projection distance
y = (0.1982x
מ 0.219) ן 3.28 y1 = (0.1333x
מ 0.21) ן 3.28 x2: Picture size (diag.) (inches)
y : Maximum projection distance (feet)
y12 : Minimum projection distance (feet)
• There is an error of
ע 4 inches (ע 10 cm) in the formula above. Reversed Image Setup
Rear projection
• Place a translucent screen between the projector and
the audience.
• Use the projector’s menu system to reverse the
projected image. (See page 34 for use of this
function.)
Projection using a mirror
• Place a mirror (normal flat type) in front of the lens.
• Use the projector’s menu system to reverse the
projected image. (See page 34 for use of this
function.)
• The image reflected from the mirror is projected onto
the screen.
Translucent
screen
90˚
90˚
Mirror
CAUTION
• When using a mirror, be sure to carefully position both the
projector and the mirror so the light does not shine into the
eyes of the audience.
E-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the Projector and Screen
Ceiling-mount Setup
• Use the optional Sharp ceiling-mount bracket for this installation.
• Before mounting the projector, contact your nearest Authorized Sharp Industrial LCD Products dealer or Service
Center to obtain the recommended ceiling-mount bracket (sold separately). (AN-XGCM50 ceiling-mount bracket,
AN-EP101AP extension tube for AN-XGCM50.)
• When the projector is in the inverted position, use the upper edge of the screen as the base line.
• Use the projector’s menu system to select the appropriate projection mode. (See page 34 for use of this function.)
90˚
Adjusting the Height of the Image
Height of Image
See the table below for exact distances from the lens
center to the bottom of the image.
Picture size
(diag.)
Distance from the lens center to the
bottom of the image (H)
300Љ (240Љ W
ן 180Љ H) 200Љ (160Љ W
ן 120Љ H) 150Љ (120Љ W
ן 90Љ H) 100Љ (80Љ W
ן 60Љ H) 80Љ (64Љ W
ן 48Љ H) 60Љ (48Љ W
ן 36Љ H) 40Љ (32Љ W
ן 24Љ H) 18Љ (45.8 cm)
12Љ (30.5 cm)
9Љ (22.9 cm)
6Љ (15.3 cm)
90˚
H
4 51⁄64Љ (12.2 cm)
3 19⁄32Љ (9.2 cm)
2 25⁄64Љ (6.1 cm)
E-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Height of the Image
Using the Adjustment Foot
You can adjust the height of the image by raising
the projector with the foot release.
1 Press the foot release and lift the projector to the
desired angle.
2 Remove your hand from the foot release. Once
the adjustment foot has locked in position, release
the projector.
Returning the projector to its original position
While holding the projector, press the foot release and slowly
lower the projector to its original position.
Foot release
• The projector is adjustable up to approximately 5° from the
standard position.
• When an adjustment is made, the image may become
distorted (keystoned), depending on the relative positions
of the projector and the screen.
CAUTION
• Do not press the foot release when the adjustment foot is
extended without firmly holding the projector.
• Do not hold the lens when lifting or lowering the projector.
• When lowering the projector, be careful not to get your
fingers caught in the area between the adjustment foot and
the projector.
MOUSE
ADJ.
Projector
Digital Keystone Correction
When the image is distorted due to the projection
angle, the Digital Keystone Correction function
allows you to correct it.
VOL
ON
MUTE
OFF
BLACK
SCREEN LASER
TOOLS
MENU
(For use with the “Power” remote control, slide the
MOUSE/ADJUSTMENT switch to the ADJ. position.)
6
2
1 Press KEYSTONE.
3, 4
2 Press ∂ to compress the upper part of the image.
Press ƒ to compress the lower part of the image.
3 Press ENTER to display a test pattern.
4 Press ENTER to clear the test pattern.
5 To exit, press KEYSTONE.
R-CLICK ENTER
INPUT
IrCOM
FREEZE AUTO SYNC
KEYSTONE ENLARGE
1, 5
MOUSE
ADJ.
6 To reset, press LEFT-CLICK.
LIGHT
Pressing ∂
in Step 2
Pressing ƒ
in Step 2
• Straight lines or the edges of the displayed image may
become jagged.
3 Test Pattern
4
g
E-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Projector
Connecting the Projector to a Computer
You can connect your projector to a computer for projection of full color computer images. See the next page for
details on the connections.
CAUTION
• Before connecting, be sure to turn both the projector and the computer off. After making all connections, turn the projector
on first. The computer should always be turned on last.
• Please read the computer’s operation manual carefully.
• Refer to page 44 “Input Signals (Recommended Timing)” for a list of computer signals compatible with the projector. Use with computer
signals other than those listed may cause some of the functions not to work.
Computer
Remote mouse receiver (supplied)
Use this terminal to con-
nect the supplied mouse
control cable to the remote
mouse receiver.
Mouse control cable for
Mac (supplied)
Mouse control serial cable
(supplied)
Mouse control cable for IBM PS/2 (supplied)
Macintosh adaptor
(supplied)
Rear terminals
Computer cable (supplied)
RS-232C cable (cross type, sold separately)
Computer audio cable (3.5 mm stereo minijack cable, supplied)
• The arrows (→, ↔ ) indicate the direction of the signals.
• When connecting to a Macintosh computer, use the supplied Macintosh adaptor.
E-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Projector
Connect your projector to a computer for projection of full-color computer images.
1
1 Connecting an IBM-PC
1. Plug one end of the supplied computer cable into
the COMPUTER INPUT port on the projector.
2. Plug the other end into the Monitor output port on
the computer.
3. Secure the plugs by tightening the thumb screws.
1
3
2 Connecting a Macintosh computer
1. Set the proper switches on the supplied Macintosh
adaptor to the desired resolution. Some examples
are as follows:
• For 640
ן 480 resolution, set switches 1 and 2 to “ON” and 3, 4, 5 and 6 to “OFF”.
• For 832
ן 624 resolution, set switches 2 and 4 to “ON” and 1, 3, 5 and 6 to “OFF”.
• For 1,024
ן 768 resolution, set switches 2 and 3 to “ON” and 1, 4, 5 and 6 to “OFF”.
Computer
cable
(supplied)
2
3
2. Connect the supplied Macintosh adaptor to the
supplied computer cable.
3. Connect the other end of the Macintosh adaptor
to the Monitor output port on your Macintosh
computer.
4. Plug the other end of the supplied computer cable
into the COMPUTER INPUT port on the projector.
5. Secure the plugs by tightening the thumb screws.
Macintosh adaptor (supplied)
1
2
ON
ł
• Once the adaptor is connected to a computer and the
computer is turned on, the display mode cannot be changed
even if the switches on the adaptor are reset.
• The supplied Macintosh adaptor is only for use with H-SYNC
and V-SYNC output. When connecting a Macintosh
computer that only outputs C-SYNC, use a C-SYNC output
adaptor (sold separately).
Ń
OFF
3 Connecting other compatible com-
puters
When connecting the projector to a compatible com-
puter other than an IBM-PC (VGA/SVGA/XGA/SXGA/
UXGA) or Macintosh (i.e. Workstation), a separate cable
may be needed. Please contact your dealer for more
information.
4
5
• Connecting computers other than the recommended types
may result in damage to the projector, the computer, or both.
3
4 Turning on the power of the projector
and the computer
Once the connections are made, first turn on the
projector (see page 18), then your computer.
2
5
Computer
cable
(supplied)
Macintosh
adaptor
(supplied)
E-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Projector
“Plug and Play” Function
This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC compatible
computer will communicate their setting requirements, allowing for quick and easy setup.
• The DDC, Plug and Play function of this projector operates only when used in conjunction with a VESA DDC compatible
computer.
Using the Remote Mouse Receiver and RS-232C Port
• The remote mouse receiver can be used with the “Power” remote control or the simple presentation remote
control to operate the computer’s mouse. Plug the supplied mouse control cable from the remote mouse receiver
to the computer. (See page 16.)
• When the RS-232C port on the projector is connected to a computer with an RS-232C cable (cross type, sold
separately), the computer can be used to control the projector and check the status of the projector. See pages
42 and 43 for details.
CAUTION
• Do not connect or remove the mouse control cables or RS-232C cable to or from the computer while it is on. This may
damage your computer.
• The wireless mouse functions can operate computers compatible with IBM PS/2, serial (RS-232C) or Apple ADB type mouse
systems.
• The wireless mouse or RS-232C function may not operate if your computer port is not correctly set up. Please refer to the
operation manual of the computer for details on setting up/installing the correct mouse driver.
Connecting the Projector to Video Equipment
You can connect your projector to a VCR, laser disk player or external audio components.
CAUTION
• Always turn off the projector while connecting to video equipment, in order to protect both the projector and the equipment
being connected.
• By using external audio components, the volume can be amplified for better sound.
Rear terminals
Use this terminal when the audio-
visual equipment to be connected has
an S-VIDEO output terminal.
To video
output
To audio
input
To audio
output
To S-video
output
terminal
terminals
terminals
terminal
VCR
Amplifier
E-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
1 Connect the Power Cord
Plug the supplied power cord into the AC socket on the
back of the projector.
1
2
2 Turn on the Main Power
Press the MAIN POWER switch on the back of the
projector. The POWER indicator lights up red and the
projector enters standby mode.
• If the bottom filter cover is not securely installed, the POWER
indicator flashes.
• When the main power is not on, the “Power” remote control
cannot be used.
When the main power is on, the POWER indicator lights up
red.
Projector
3 Turn on the Lamp Power
Press POWER ON on the projector or the “Power”
remote control.
VOL
ON
MUTE
3
OFF
BLACK
SCREEN LASER
TOOLS
MENU
• The flashing green LAMP REPLACEMENT indicator shows
that the lamp is warming up. Wait until the indicator stops
flashing before operating the projector.
• If the power is turned off and then immediately turned on
again, it may take a short while before the lamp turns on.
• After the projector is unpacked and turned on for the first
time, a slight odor may be emitted from the exhaust vent.
This odor will soon disappear with use.
R-CLICK ENTER
INPUT
IrCOM
When the power is on, the LAMP REPLACEMENT indicator
lights indicating the status of the lamp.
Green: Lamp is ready.
Flashing green: Warming up.
Red: Change the lamp.
4 Adjusting Focus
Slide the focus knob until the image on the screen
becomes clear.
5
4
5 Adjusting Zoom
Slide the zoom knob. The image can be adjusted to the
desired size within the zoom range.
E-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Projector
6 Selecting and Checking the Input
7a
VOL
ON
Mode
MUTE
Press INPUT SELECT on the projector or INPUT on
the “Power” remote control to select the desired input
mode. Press it again to change the mode as shown on
the left.
OFF
BLACK
SCREEN LASER
TOOLS
MENU
7b
8
• When no signal is being received, “No Signal” will be
displayed. When a signal that the projector is not preset to
receive is being received, “Not Reg.” will be displayed.
• The picture size and aspect ratio differ in “Computer”, “Pal”,
“Secam” and “Ntsc” modes.
R-CLICK ENTER
6
INPUT
IrCOM
FREEZE AUTO SYNC
On-screen Display
To view the image from a
source connected to:
COMPUTER INPUT 1
s
f
COMPUTER INPUT 2
f
VIDEO INPUT
7a
7b
7 Adjusting the Volume
a. Press VOLUME
ם /VOLUME מ on the projector or the “Power” remote control to adjust the volume.
b. Press MUTE on the projector or the “Power”
remote control to temporarily turn off the sound.
Press MUTE again to turn the sound back on.
8 Turning off the Power
1. Press POWER OFF on the projector or the
“Power” remote control. The screen on the left will
appear.
8
2. Press POWER OFF again while the screen is
displayed.
• If you accidentally pressed POWER OFF and do not want
to turn off the power, wait until the power off screen shown
on the left disappears.
When POWER OFF is pressed twice, the POWER indicator
will light up red and the cooling fan will run for about 90
seconds. The projector will then enter standby mode.
The power can be turned on again by pressing POWER
ON on the projector or the “Power” remote control. When
the power is turned on, the POWER indicator and the LAMP
REPLACEMENT indicator light green.
• The POWER indicator flashes if the bottom filter cover is
not securely installed.
E-19
Download from Www.Somanuals.com. All Manuals Search And Download.
MOUSE
ADJ.
Using the GUI (Graphical User Interface) Menu Screens
Projector
VOL
ON
MUTE
OFF
BLACK
SCREEN LASER
MENU
TOOLS
6
1, 7
2, 3, 5
4
R-CLICK ENTER
INPUT
IrCOM
Menu bar in COMPUTER Mode
This projector has two sets of menu screens (Computer/
Video) that allow you to adjust the image and various
projector settings. These menu screens can be
operated from the projector or the “Power” remote
control with the following buttons.
1
4
(For use with the “Power” remote control, slide the
MOUSE/ADJUSTMENT switch to the ADJ. position.)
1 Press MENU to display the COMPUTER or VIDEO
mode menu bar.
2 Press ß/© to select an adjustment menu on the
menu bar.
3 Press ∂/ƒ to select a specific adjustment item.
4 To display only the adjustment item, press ENTER
after selecting the item. Only the menu bar and
the selected adjustment item will appear.
5 Press ß/© to adjust the item.
6 Press LEFT-CLICK to return to the previous
screen.
Menu bar in VIDEO Mode
1
7 Press MENU to exit from the GUI.
• For details on items on the menu screen, see the tree charts
on the next page.
E-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the GUI (Graphical User Interface) Menu Screens
Items on the COMPUTER1 or COMPUTER2
Mode Menu Bar
Items on the VIDEO Mode Menu Bar
Main menu
Sub menu
Main menu
Sub menu
PICTURE
CONTRAST
מ 30 ם 30 PICTURE
CONTRAST
מ 30 ם 30 BRIGHT
RED
מ 30 ם 30 מ 30 ם 30 מ 30 ם 30 BRIGHT
COLOR
TINT
מ 30 ם 30 מ 30 ם 30 מ 30 ם 30 מ 30 ם 30 מ 30 ם 30 מ 30 ם 30 BLUE
RESET
AUTO SYNC
CLOCK
PHASE
H-POS
V-POS
SHARP
RED
FINE SYNC
[ON/OFF]
מ 90 ם 90 מ 60 ם 60 מ 90 ם 90 מ 60 ם 60 BLUE
RESET
TREBLE
BASS
RESOLUTION VERT FREQ
AUDIO
מ 30 ם 30 1
800
ן 600 60 Hz
75 Hz
מ 30 ם 30 2
•
1024
ן 768 RESET
RESET
LAMP TIMER
•
7
SAVE SETTING
SELECT SETTING
MODE
OPTION
RESOLUTION VERT FREQ
BLK SCRN DISP
OSD DISPLAY
[ON/OFF]
[ON/OFF]
1
2
•
800
ן 600 60 Hz
75 Hz
1024
ן 768 AUDIO
TREBLE
BASS
מ 30 ם 30 מ 30 ם 30 I/P CONVERSION
INTERLACED
•
7
PROGRESSIVE
AUTO
RESET
VIDEO SYSTEM
OPTION
LAMP TIMER
PAL
AUTO SYNC DISP
BLK SCRN DISP
OSD DISPLAY
FIT TO SCREEN
SIGNAL
[ON/OFF]
[ON/OFF]
[ON/OFF]
[ON/OFF]
SECAM
NTSC4.43
NTSC3.58
SHARP
CUSTOM
BLUE
RESOLUTION 1024
ן 768 BACKGROUND
VERT FREQ
HOR FREQ
48 KHz
60 Hz
BACKGROUND
SHARP
CUSTOM
BLUE
NONE
STARTUP IMAGE
SHARP
CUSTOM
NONE
NONE
STARTUP IMAGE
SHARP
CUSTOM
NONE
LANGUAGE
ENGLISH
DEUTSCH
ESPAÑOL
NEDERLANDS
FRANÇAIS
ITALIANO
SVENSKA
LANGUAGE
ENGLISH
DEUTSCH
ESPAÑOL
NEDERLANDS
FRANÇAIS
ITALIANO
SVENSKA
FRONT
PRJ MODE
STATUS
CEILING
ם FRONT REAR
FRONT
PRJ MODE
STATUS
CEILING
ם FRONT REAR
CEILING
ם REAR CEILING
ם REAR • Only the items highlighted in the tree charts above can be adjusted.
• To adjust the items under the sub menu, press © after entering the sub menu.
E-21
Download from Www.Somanuals.com. All Manuals Search And Download.
MOUSE
ADJ.
Using IrCOM for Wireless Presentations
Projector
• The IrCOM function can be used to wirelessly transfer
still images from a computer, handheld P/C or digital
camera to the projector via infrared communication.
This function is used with the supplied Sharp
Advanced Presentation Software. See the operation
manual of the software for installation and operating
instructions.
VOL
ON
MUTE
OFF
BLACK
SCREEN LASER
MENU
TOOLS
• Position the projector and the IrCOM transmitting
device within the range shown on the left.
3
4
R-CLICK ENTER
• To avoid transmission errors or changes in the image, ensure
the following when setting up the projector and transmitting
device.
• The IrCOM sensors on both the projector and transmitting
device are protected from direct sunlight or strong
ambient light.
INPUT
IrCOM
FREEZE AUTO SYNC
PC
Digital
camera
• The transmitting device has sufficient battery power.
• The projector and transmitting device are positioned
within the designated operating range.
4؆ (10 cm)–3
3؆ (1 m) 15˚
• The IrCOM sensors on the projector and transmitting
device are correctly aligned.
15˚
15˚
15˚
1 Before setting up the projector and transmitting
device, install the Sharp Advanced Presentation
Software in the supplied CD-ROM on the com-
puter. See the operation manual of the software
for installation details.
On-screen Display
• The distance between the projector and transmitting device
may have to be less than 10 cm depending on the
transmitting device.
• When using the digital still camera, set it to the image
transmission mode and set the computer to the image
reception mode.
2 Align the projector and transmitting device at the
same height and angle at a distance of 4Љ (10 cm)
to 3Ј 3Љ (1 meter) with an unobstructed line of view.
3 Press IrCOM on the projector or the “Power”
remote control to enter the IrCOM mode. The On-
screen Display changes as shown on the left.
f
f
• To use the “Power” remote control to operate this function,
slide the MOUSE/ADJUSTMENT switch to the ADJ. position
before pressing IrCOM.
• If the On-screen Display does not change as shown on the
left, the projector may not be within the reception range
from the IrCOM transmitting device.
4 Press INPUT SELECT on the projector or INPUT
on the “Power” remote control to exit the IrCOM
mode.
• If the projector is unable to receive images from the IrCOM
transmitting device, the On-screen display on the left will
appear.
E-22
Download from Www.Somanuals.com. All Manuals Search And Download.
MOUSE
ADJ.
Selecting the On-screen Display Language
Projector
English is the preset language for the On-screen
Display. It can be changed to English, German, Spanish,
Dutch, French, Italian, Swedish or Japanese.
VOL
ON
MUTE
OFF
BLACK
SCREEN LASER
(For use with the “Power” remote control, slide the
TOOLS
MENU
MOUSE/ADJUSTMENT switch to the ADJ. position.)
1, 5
1 Press MENU.
2 Press ß/© to select “Language”.
3 Press ∂/ƒ to select the desired language .
4 Press ENTER to save the setting. The On-screen
Display is now programed to display in the
language selected.
2, 3
R-CLICK ENTER
4
INPUT
IrCOM
5 To exit from the GUI, press MENU.
(GUI) On-screen Display
MOUSE
ADJ.
Selecting the Video Input System Mode (VIDEO mode only)
Projector
The video input system mode is preset to “Auto”;
however, it can be changed to a specific system mode,
if the selected system mode is not compatible with the
connected audiovisual equipment.
VOL
ON
MUTE
OFF
BLACK
SCREEN LASER
TOOLS
MENU
(For use with the “Power” remote control, slide the
MOUSE/ADJUSTMENT switch to the ADJ. position.)
1, 6
2, 3, 4
5
1 Press MENU.
2 Press ß/© to select “Option”.
3 Press ∂/ƒ to select “Video System”.
4 Press ∂/ƒ to select the desired video system
mode.
R-CLICK ENTER
INPUT
IrCOM
5 Press ENTER to save the setting.
6 To exit from the GUI, press MENU.
• When the system mode is set to “Auto”, you may not receive
a clear picture due to signal differences. Should this occur,
switch to the video system you are viewing.
E-23
Download from Www.Somanuals.com. All Manuals Search And Download.
MOUSE
ADJ.
Picture Adjustments
You can adjust the projector’s picture to your prefer-
ences with the following picture settings.
Projector
VOL
ON
MUTE
OFF
Description of Adjustment Items
BLACK
SCREEN LASER
Selected item in
ß button
© button
TOOLS
MENU
COMPUTER mode
Contrast
Bright
1, 5
2, 3
4
For less contrast
For less brightness
For weaker red
For more contrast
For more brightness
For stronger red
Red
Blue
Reset
For weaker blue
All computer adjustment items are returned to the factory
preset settings.
For stronger blue
R-CLICK ENTER
INPUT
IrCOM
Selected item in
VIDEO mode
Contrast
Bright
ß button
© button
For less contrast
For less brightness
For less color intensity
For more contrast
For more brightness
For more color intensity
Color
Tint
Skin tones become purplish Skin tones become greenish
Sharp
Red
For less sharpness
For weaker red
For more sharpness
For stronger red
Blue
For weaker blue
For stronger blue
All video adjustment items are returned to the factory preset
settings.
Reset
(The following steps are used as an example in adjusting
the picture in “COMPUTER” mode.)
(For use with the “Power” remote control, slide the
MOUSE/ADJUSTMENT switch to the ADJ. position.)
(GUI) On-screen Display
1
2
1 Press MENU. Menu bar and “Picture” menu
screen appears. GUI Operation guide is also
displayed.
2 Press ∂/ƒ to select a specific adjustment item.
3 Press ß/© to move the mark of the selected
adjustment item to the desired setting.
4 Press ENTER to save the setting.
5 To exit from the GUI, press MENU.
• To reset all adjustment items, select “Reset” on the “Picture”
menu screen and press ENTER.
• The adjustments can be stored separately in the
“COMPUTER1”, “COMPUTER2” and “VIDEO” modes.
• “Tint” appears only in “NTSC3.58” and “NTSC4.43” modes.
E-24
Download from Www.Somanuals.com. All Manuals Search And Download.
MOUSE
ADJ.
Audio Adjustments
This projector’s audio is factory preset to standard
settings. However, you can adjust it to suit your own
preferences by adjusting the following audio settings.
Projector
VOL
ON
MUTE
OFF
BLACK
SCREEN LASER
Description of Adjustment Items
TOOLS
MENU
Selected item
Treble
Bass
Reset
ß button
For weaker treble
For weaker bass
All audio adjustment items are returned to the factory preset
settings.
© button
For stronger treble
For stronger bass
1, 6
2, 3, 4
5
R-CLICK ENTER
INPUT
IrCOM
(For use with the “Power” remote control, slide the
MOUSE/ADJUSTMENT switch to the ADJ. position.)
1 Press MENU. Menu bar and “Picture” menu
screen appears. GUI Operation guide is also dis-
played.
(GUI) On-screen Display
2
3
2 Press ß/© to select “Audio”.
3 Press ∂/ƒ to select a specific adjustment item.
4 Press ß/© to move the mark of the selected
adjustment item to the desired setting.
5 Press ENTER to save the setting.
6 To exit from the GUI, press MENU.
• To reset all adjustment items, select “Reset” on the “Audio”
menu screen and press ENTER.
E-25
Download from Www.Somanuals.com. All Manuals Search And Download.
MOUSE
ADJ.
Computer Image Adjustments
When displaying computer patterns which are very
detailed (tiling, vertical stripes, etc.), interference may
occur between the LCD pixels, causing flickering,
vertical stripes, or contrast irregularities in portions of
the screen. Should this occur, adjust “Clock”, “Phase”,
“H-Pos” and “V-Pos” for optimum computer image.
Projector
VOL
ON
MUTE
OFF
BLACK
SCREEN LASER
TOOLS
MENU
1, 6
2, 3, 4
5
Description of Adjustment Items
Selected item
Description
Clock
Adjusts vertical noise.
R-CLICK ENTER
Phase
H-Pos
V-Pos
Adjusts horizontal noise (similar to tracking on your VCR).
Centers the on-screen image by moving it to the left or right.
Centers the on-screen image by moving it up or down.
INPUT
IrCOM
• Computer image adjustment can be made easily by
pressing AUTO SYNC ( ) on the projector or the “Power”
remote control. See the next page for details.
(GUI) On-Screen Display
(Select the desired computer input mode with INPUT
SELECT on the projector or INPUT on the “Power”
remote control.)
2
3
(For use with the “Power” remote control, slide the
MOUSE/ADJUSTMENT switch to the ADJ. position.)
1 Press MENU. Menu bar and “Picture” menu
screen appears. GUI Operation guide is also
displayed.
2 Press ß/© to select “Fine Sync”.
3 Press ∂/ƒ to select a specific adjustment item.
4 Press ß/© to move the mark of the selected
adjustment item to the desired setting.
5 Press ENTER to save the setting.
6 To exit from the GUI, press MENU.
• To reset all adjustment items, select “Reset” on the “Fine
Sync” menu screen and press ENTER.
E-26
Download from Www.Somanuals.com. All Manuals Search And Download.
MOUSE
ADJ.
Computer Image Adjustments
Projector
Auto Sync Adjustment
• Used to automatically adjust a COMPUTER image.
• Auto Sync adjustment can be made manually by
pressing AUTO SYNC on the projector or the “Power”
remote control, or automatically by setting “Auto Sync”
to “ON” in the projector’s GUI menu.
VOL
ON
MUTE
OFF
BLACK
SCREEN LASER
TOOLS
MENU
1, 6
When “Auto Sync” is set to “ON”:
2, 3, 4
• The sync adjustment is automatically made each time
the projector is turned on while connected to a com-
puter or the input selection is changed.
R-CLICK ENTER
5
INPUT
IrCOM
• The Auto Sync adjustment setting previously made is
cleared when the projector’s setting is changed.
FREEZE AUTO SYNC
AUTO SYNC
button
KEYSTONE ENLARGE
(For use with the “Power” remote control, slide the
MOUSE/ADJUSTMENT switch to the ADJ. position.)
1 Press MENU.
(GUI) On-screen Display
2 Press ß/© to select “Fine Sync”.
3 Press ∂/ƒ to select “Auto Sync”.
4 Press ß/© to select “ON”.
5 Press ENTER to save the setting.
6 To exit from the GUI, press MENU.
• Automatic adjustments can be made by pressing AUTO
SYNC on the projector or the “Power” remote control.
• When the optimum image cannot be achieved with Auto
Sync adjustment, use manual adjustments. (See the
previous page.)
During Auto Sync adjustment, the On-screen Display
changes as shown on the left.
g
• Auto Sync adjustment may take some time to complete,
depending on the image of the computer connected to the
projector.
f
s
Auto Sync Display Function
By default a Sharp image is superimposed during Auto
Sync adjustment. You can choose not to have this
superimposed image during Auto Sync adjustment.
(For use with the “Power” remote control, slide the
MOUSE/ADJUSTMENT switch to the ADJ. position.)
1 Press MENU.
2 Press ß /© to select “Option”.
3 Press ∂/ƒ to select “Auto Sync Disp”.
4 Press ß /© to select “ ” to remove the auto sync
display during Auto Sync adjustment.
5 Press ENTER to save the setting.
6 To exit from the GUI, press MENU.
E-27
Download from Www.Somanuals.com. All Manuals Search And Download.
MOUSE
ADJ.
Computer Image Adjustments
Projector
Saving and Selecting Adjustment Settings
This projector allows you to store up to seven adjustment
settings for use with various computers. Once these
settings are stored, they can be easily selected each
time you connect the computer to the projector.
VOL
ON
MUTE
OFF
BLACK
SCREEN LASER
TOOLS
MENU
1, 6
2, 3, 4
5
Saving the adjustment setting
(For use with the “Power” remote control, slide the
MOUSE/ADJUSTMENT switch to the ADJ. position.)
1 Press MENU.
R-CLICK ENTER
2 Press ß/© to select “Fine Sync”.
3 Press ∂/ƒ to select “Save Setting”, and then press
©.
INPUT
IrCOM
(GUI) On-screen Display
4 Press ∂/ƒ to select the desired memory location of
2
3
the setting.
5 Press ENTER to save the setting.
6 To exit from the GUI, press ENTER.
Selecting a saved setting
(For use with the “Power” remote control, slide the
MOUSE/ADJUSTMENT switch to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select “Fine Sync”.
3 Press ∂/ƒ to select “Select Setting”, and then press
©.
4 Press ∂/ƒ to select the desired memory setting.
5 Press ENTER to select the setting.
6 To exit from the GUI, press MENU.
•
•
If the memory position has not been set, the resolution and frequency
will not be displayed.
When selecting the stored adjustment setting with “Select Setting”, the
computer system should match the stored setting.
Mode Adjustment
Used to display image in the text and graphic modes.
CONNECTING TO IBM-PC COMPUTERS
4
• Ordinarily, the type of input signal is detected and the
correct resolution mode (Text or Graphics) is
automatically selected. However, for the following
signals, set “Mode” on the “Fine Sync” menu screen to
“ON” or “OFF” to select the projector’s resolution mode
to match the computer display mode properly.
(For use with the “Power” remote control, slide the
MOUSE/ADJUSTMENT switch to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select “Fine Sync”.
3 Press ∂/ƒ to select “Mode”.
4 Press ß/© to select “ON” for text mode (720 dots
ן 350 lines, 720 dots ן 400 lines or 1,152 dots ן 864 lines, 60 Hz) or “OFF” for graphic mode (640 dots
ן 350 lines, 640 dots ן 400 lines or 1,024 dots
ן 864 lines, 60 Hz). (For IBM-PC) Press ß/© to select “ON” when connecting to a
Macintosh II with 35 kHz dot frequency or “OFF”
when connecting to a Macintosh LC Series computer
with 34.79 kHz dot frequency. (For Macnitosh LC
Series)
Mode Adjustment
5 Press ENTER to save the setting.
6 To exit from the GUI, press MENU.
•
•
•
When connecting third party video cards and other Macintosh computers,
set “Mode” on the “Fine Sync” menu screen to “ON” or “OFF” to select the
correct display mode.
When the input signal is automatically detected or when there is no input
signal, “Mode (---)” appears on the screen and the display mode cannot
be changed.
Avoid displaying computer patterns which repeat every other line (hori-
zontal stripes). (Flickering may occur, making the image hard to see.)
E-28
Download from Www.Somanuals.com. All Manuals Search And Download.
MOUSE
ADJ.
Digital Image Magnification and Reduction
Projector
This function allows you to magnify or reduce a specific
portion of an image. This is useful when you want to
display a detailed portion of the image or display it in
its native resolution.
VOL
ON
MUTE
OFF
BLACK
SCREEN LASER
TOOLS
MENU
(To use the “Power” remote control to operate this
function, slide the MOUSE/ADJUSTMENT switch to
the ADJ. position before pressing ENLARGE.)
4
2
3
R-CLICK ENTER
1 Press ENLARGE. A rectangle appears on the
screen.
INPUT
IrCOM
2 Press ∂/ƒ/ß/© to select the area of the image
FREEZE AUTO SYNC
KEYSTONE ENLARGE
you want to enlarge or reduce.
1, 5
3 Press ENTER to enlarge the area of the image.
4 Press LEFT-CLICK on the “Power” remote control
to reduce the area of the image.
MOUSE
ADJ.
5 Press ENLARGE again to turn off the rectangular
on the screen.
• Picture reduction can only be made with the “Power” remote
control.
• If the image has an SXGA or UXGA resolution, you can
scroll the image on the screen by using ∂/ƒ/ß/© .
• Each time ENTER or LEFT-CLICK is pressed, image
magnification and reduction patterns toggle as shown
below.
Pressing ENTER
Dot by dot
1 2 4 8 Pressing LEFT-CLICK
Dot by dot
8 4 2 1 Dot by dot mode display
This mode displays images in their native resolution and
not expanded to fit the LCD resolution. See the steps
and the third note above to display an image in dot by
dot mode.
E-29
Download from Www.Somanuals.com. All Manuals Search And Download.
MOUSE
ADJ.
Black Screen Function
Projector
This function can be used to superimpose a black
screen over the projected image.
VOL
ON
BLACK
SCREEN
button
MUTE
Blacking out the Projected Image
Press BLACK SCREEN. “BLACK SCREEN” is dis-
played on the screen. To return to the original projected
image, press BLACK SCREEN again.
OFF
BLACK
SCREEN LASER
MENU
TOOLS
1, 6
2, 3, 4
5
• To use the “Power” remote control to operate this function,
slide the MOUSE/ADJUSTMENT switch to the MOUSE
position before pressing BLACK SCREEN.
R-CLICK ENTER
INPUT
IrCOM
MOUSE
ADJ.
Projected Image
Turning off the On-screen Display
The On-screen Display (“BLACK SCREEN”) that
appears during black screen can be turned off. When
“BLK SCRN Disp” is set to “ ” in the projector’s GUI
menu, “BLACK SCREEN” will not be displayed during
function.
sg
(For use with the “Power” remote control, slide the
MOUSE/ADJUSTMENT switch to the ADJ. position.)
(GUI) On-screen Display
1 Press MENU.
2 Press ß /© to select “Option”.
3 Press ∂/ƒ to select “BLK SCRN Disp”.
4 Press ß/© to select “ ” to turn on or “ ” to
turn off the function.
5 Press ENTER to save the setting.
6 To exit from the GUI, press MENU.
MOUSE
ADJ.
On-screen Display Override Function
Projector
This function allows you to turn off the on-screen
messages that appear during “input select”, “IrCOM”
and “FREEZE” functions. Once “OSD Display” is set to
VOL
ON
MUTE
OFF
“
” in the projector’s GUI menu, the on-screen
BLACK
SCREEN LASER
messages will not appear when INPUT, IrCOM and
FREEZE on the projector or the “Power” remote control
are pressed.
TOOLS
MENU
1, 6
2, 3, 4
5
(For use with the “Power” remote control, slide the
MOUSE/ADJUSTMENT switch to the ADJ. position.)
R-CLICK ENTER
INPUT
IrCOM
1 Press MENU.
2 Press ß/© to select “Option”.
3 Press ∂/ƒ to select “OSD Display”.
4 Press ß/© to select “ ” to turn off the On-screen
Display.
5 Press ENTER to save the setting.
6 To exit from the GUI, press MENU.
E-30
Download from Www.Somanuals.com. All Manuals Search And Download.
MOUSE
ADJ.
Fit to Screen Function
Projector
This function can be used to expand or compress
images which are not native 4:3 aspect ratio (i.e. 1,152
ן 864 resolution). VOL
ON
MUTE
OFF
BLACK
SCREEN LASER
(For use with the “Power” remote control, slide the
TOOLS
MENU
MOUSE/ADJUSTMENT switch to the ADJ. position.)
1, 6
2, 3, 4
5
1 Press MENU.
2 Press ß/© to select “Option”.
3 Press ∂/ƒ to select “Fit To Screen”.
4 Press ß/© to select “ ” to display the image in
its native resolution or “ ” to expand the image,
to fill the screen.
R-CLICK ENTER
INPUT
IrCOM
5 Press ENTER to save the setting.
6 To exit from the GUI, press MENU.
(GUI) On-screen Display
MOUSE
ADJ.
I/P Conversion (VIDEO mode only)
Projector
This function allows you to select either an interlaced
display or a progressive display of a video signal. The
progressive display projects a smooth video image.
VOL
ON
MUTE
OFF
(For use with the “Power” remote control, slide the
MOUSE/ADJUSTMENT switch to the ADJ. position.)
BLACK
SCREEN LASER
TOOLS
MENU
1, 6
2, 3, 4
5
1 Press MENU.
2 Press ß/© to select “Option”.
3 Press ∂/ƒ to select “I/P Conversion” and then
press ©.
R-CLICK ENTER
4 Press ∂/ƒ to select “Interlaced” or “Progressive”.
5 Press ENTER to save the setting.
6 To exit from the GUI, press MENU.
INPUT
IrCOM
E-31
Download from Www.Somanuals.com. All Manuals Search And Download.
MOUSE
ADJ.
Checking the Input Signal and Lamp Usage Time
This function allows you to check the current input signal
information and accumulated lamp usage time.
Projector
VOL
ON
MUTE
(For use with the “Power” remote control, slide the
OFF
MOUSE/ADJUSTMENT switch to the ADJ. position.)
BLACK
SCREEN LASER
MENU
TOOLS
1 Press MENU.
1, 4
2 Press ß/© to select “Option”. The lamp usage
time will be displayed.
3 Press ∂/ƒ to select “Signal” to display the
current input signal.
2
R-CLICK ENTER
4 To exit from the GUI, press MENU.
3
INPUT
IrCOM
• It is recommended that the lamp be replaced after 1,900
hours of usage. See pages 39 and 40 for lamp replacement.
• In VIDEO mode, the resolution and frequency settings will
not be displayed.
(GUI) On-screen Display
MOUSE
ADJ.
Setting a Background Image
This function allows you to select the image displayed
when no signal is being sent to the projector.
Projector
VOL
ON
MUTE
OFF
Description of Background Images
BLACK
SCREEN LASER
TOOLS
MENU
Selected item
Sharp
Background image
SHARP default image
User customized image
Blue screen
1, 6
2, 3, 4
5
Custom
Blue
R-CLICK ENTER
None
Black screen
INPUT
IrCOM
(For use with the “Power” remote control, slide the
MOUSE/ADJUSTMENT switch to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select “Option”.
3 Press ∂/ƒ to select “Background”, and then press
©.
4 Press ∂/ƒ to select the background image you want
to display on the screen.
5 Press ENTER to save the setting.
6 To exit from the GUI, press MENU.
• By selecting “Custom”, the projector can display a custom
image (i.e. your company logo) as the background image.
Please see the Sharp Advanced Presentation Software’s
operation manual for how to save (or change) a custom
image.
E-32
Download from Www.Somanuals.com. All Manuals Search And Download.
MOUSE
ADJ.
Selecting a Startup Image
Projector
• This function allows you to specify the image to be
displayed upon the projector’s startup.
• A custom image (i.e. your company logo) can be
loaded on the projector via IrCOM or an RS-232C
cable. See pages 15 and 22 in this operation manual,
and also the supplied Sharp Advanced Presentation
Software’s operation manual for detailed instructions.
VOL
ON
MUTE
OFF
BLACK
SCREEN LASER
TOOLS
MENU
1, 6
2, 3, 4
5
Description of Startup Images
R-CLICK ENTER
Selected item
Sharp
Startup image
INPUT
IrCOM
SHARP default image
User customized image
Black screen
Custom
None
(GUI) On-screen Display
(For use with the “Power” remote control, slide the
MOUSE/ADJUSTMENT switch to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select “Option”.
3 Press ∂/ƒ to select “Startup Image”, and then press
©.
4 Press ∂/ƒ to select the startup image you want to
display on the screen.
5 Press ENTER to save the setting.
6 To exit from the GUI, press MENU.
• By selecting “Custom”, the projector can display a custom
image (i.e. your company logo) as the startup image. Please
see the Sharp Advanced Presentation Software’s operation
manual for how to save (or change) a custom image.
Freeze Function
Projector
This function allows you to instantly freeze a moving
image. This is useful when you want to display a still
image of a video, giving you more time to explain the
image to the audience.
BLACK
SCREEN LASER
MENU
TOOLS
1 Press FREEZE to freeze the image.
2 Press FREEZE again to return to the moving
image.
R-CLICK ENTER
INPUT
IrCOM
FREEZE AUTO SYNC
1, 2
• To turn off the “FREEZE” On-screen Display, set “OSD
Display” to “ ” in the projector’s GUI menu system. (See
page 30 for details.)
KEYSTONE ENLARGE
MOUSE
ADJ.
E-33
Download from Www.Somanuals.com. All Manuals Search And Download.
MOUSE
ADJ.
Reverse/Invert Image Function
Projector
This projector is equipped with a reverse/invert image
function which allows you to reverse or invert the pro-
jected image for various applications.
VOL
ON
MUTE
OFF
BLACK
SCREEN LASER
TOOLS
MENU
Description of Projected Images
1, 5
Selected item
Projected image
FRONT
Normal image
2, 3
CEILING
ם FRONT REAR
Inverted image
R-CLICK ENTER
4
Reversed image
INPUT
IrCOM
CEILING
ם REAR Reversed and inverted image
(GUI) On-screen Display
When Selecting “Front”
(For use with the “Power” remote control, slide the
MOUSE/ADJUSTMENT switch to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select “PRJ Mode”.
3 Press ∂/ƒ to select the desired projection mode.
4 Press ENTER to save the setting.
5 To exit from the GUI, press MENU.
When Selecting “Ceiling
ם Front” • This function is used for the reversed image and ceiling-
mount setups. See pages 12 and 13 for these setups.
When Selecting “Rear”
When Selecting “Ceiling
ם Rear” E-34
Download from Www.Somanuals.com. All Manuals Search And Download.
MOUSE
ADJ.
Using the Presentation Tools
This projector is equipped with presentation tools, which
can be accessed from the “Power” remote control.
These will help you emphasize keypoints within your
presentation.
VOL
ON
MUTE
2, 7
OFF
BLACK
SCREEN LASER
TOOLS
MENU
8
3, 5
4, 6
R-CLICK ENTER
INPUT
IrCOM
FREEZE AUTO SYN
On-screen Display
1 Slide the MOUSE/ADJUSTMENT switch to the
ADJ. position.
2 Press TOOLS to display the presentation tools
menu window on the screen.
3 Press ∂/ƒ/ß/© to select the desired tool and
color.
4 Press ENTER to select it.
5 Once the tool is displayed on the screen, press
∂/ƒ/ß/© to move it around the screen.
6 Press ENTER to stamp the tool on the screen.
7 To remove the menu from the screen, press
TOOLS.
Menu Window
8 To clear the stamped tool on the screen, press
LEFT-CLICK.
• You can stamp each tool as many times as you want on the
screen.
• To clear all the stamped presentation tools on the screen,
press ∂/ƒ/ß/© to select “ ” and ENTER, or simply use
LEFT-CLICK on the “Power” remote control.
Red
Green
Blue
Yellow
Orange
White
Black
MOUSE
ADJ.
Displaying the break time
VOL
ON
MUTE
1 Slide the MOUSE/ADJUSTMENT switch to the
2
OFF
ADJ. position.
BLACK
SCREEN LASER
TOOLS
MENU
2 Press TOOLS to display the presentation tools
menu window on the screen.
6
3 Press ∂/ƒ/ß/© to select “ ” in the menu
3, 4
window.
5
4 Press ENTER to start counting down the break
time.
R-CLICK ENTER
INPUT
IrCOM
5 Press ∂ to increase or ƒ to decrease the break
FREEZE TO SY
time.
6 To clear the break time from the screen, press
LEFT-CLICK.
When selecting Sharp default image
• The break time is displayed against the background image
selected in “Setting a Background Image”. (See page 32.)
E-35
Download from Www.Somanuals.com. All Manuals Search And Download.
MOUSE
ADJ.
Checking the Adjustment Status
This function can be used to display all the adjusted
settings on the screen simultaneously.
Projector
VOL
ON
MUTE
(For use with the “Power” remote control, slide the
OFF
MOUSE/ADJUSTMENT switch to the ADJ. position.)
BLACK
SCREEN LASER
TOOLS
MENU
1 Press MENU.
1, 4
2 Press ß/© to select “Status”.
3 Press ENTER to display all the adjusted settings.
4 To exit from the GUI, press MENU.
2
R-CLICK ENTER
3
INPUT
IrCOM
(GUI) On-screen display
Automatic Power Shutoff Function
When no input signal is detected for more than 15
minutes, the projector will automatically shut down. The
on-screen message on the left will appear five minutes
before the power is automatically turned off.
• When “None” is selected in the “Background Image” setting,
the Automatic Power Shutoff function does not operate.
E-36
Download from Www.Somanuals.com. All Manuals Search And Download.
Air Filter Maintenance
• This projector is equipped with three air filters to ensure the optimal operating condition of the projector.
• The air filters should be cleaned every 100 hours of use. Clean the filters more often when the projector is used
in a dusty or smoky location.
• Have your nearest Authorized Sharp Industrial LCD Products Dealer or Service Center exchange the filter
(PFILD0076CEZZ) when it is no longer possible to clean it.
Bottom View
Side and Rear View
Air filter (not removable)
Air filter
Air filter (not removable)
Cleaning and replacing the bottom air filter
Turn off the main
power.
Remove the bottom
filter cover.
Remove the air filter.
1
2
3
Turn off the MAIN POWER
switch. Then unplug the power
cord.
Turn over the projector. Press the
tab and lift open the filter cover
in the direction of the arrow.
Grasp the air filter between your
fingers and lift it out of the filter
cover.
Tab
Ł
Replace the filter
cover.
Clean the air filter.
Replace the air filter.
4
5
6
Clean the dust off the air filter
and cover with a vacuum
cleaner extension hose.
Place the air filter underneath
the tabs on the filter frame.
Insert the tab on the end of the
filter cover into the filter cover
opening and press the filter
cover into position.
Tab
• Be sure the filter cover is securely installed. The power will not turn on unless it is correctly installed.
Cleaning the side and bottom air filters (not removable)
If dust or dirt has collected inside the air filters, clean the filters with a vacuum cleaner extension hose.
• The side and bottom air filters cannot be removed.
E-37
Download from Www.Somanuals.com. All Manuals Search And Download.
Lamp/Maintenance Indicators
Maintenance Indicators
• The warning lights on the projector indicate problems
inside the projector.
• There are two warning lights: a TEMPERATURE
WARNING indicator which warns that the projector is
too hot, and a LAMP REPLACEMENT indicator which
lets you know when to change the lamp.
• If a problem occurs, either the TEMPERATURE
WARNING indicator or the LAMP REPLACEMENT
indicator will light up red, and the power will shut off.
After turning off the power, follow the procedures given
below.
POWER
indicator
LAMP
REPLACEMENT
indicator
TEMPERATURE
WARNING
indicator
Maintenance Indicator
Condition
Problem
Possible Solution
• Blocked air intake.
• Relocate the projector to an area with
proper ventilation.
TEMPERATURE
WARNING indicator
The internal
temperature is
abnormally high.
• Clogged air filter.
• Clean the filter.
(See page 37.)
• Cooling fan breakdown.
• Internal circuit failure.
• Take the projector to your nearest Autho-
rized Sharp Industrial LCD Products Dealer
or Service Center for repair.
• Burnt-out lamp.
• Lamp circuit failure.
• Carefully replace the lamp. (See pages 39
and 40.)
The lamp does not
light up.
LAMP REPLACE-
MENT indicator
• Take the projector to your nearest Autho-
rized Sharp Industrial LCD Products Dealer
or Service Center for repair.
• Lamp has been used for
over 1,900 hours.
The lamp requires
replacement.
• Securely install the bottom filter cover.
• The bottom filter cover is
open.
POWER indicator
The POWER indicator
flashes in red when
POWER ON is
pressed.
• If the TEMPERATURE WARNING indicator lights up, follow the above possible solutions and then wait until the projector has cooled down
completely before turning the power back on. (At least 5 minutes.)
• If the power is turned off and then turned on again, as during a brief rest, the LAMP REPLACEMENT indicator may be triggered, preventing
the power from going on. Should this occur, take the power cord out of the wall outlet and put it back in again.
Lamp
The lamp in this projector operates for approximately 2,000 cumulative hours, depending on the usage environ-
ment. It is recommended that the lamp be replaced after 1,900 cumulative hours of use or when you notice a
significant deterioration of the picture and color quality.
CAUTION
• Intense light hazard. Do not attempt to look into the aperture and lens while the projector is operating.
• The lamp usage time can be checked with the On-screen Display (see page 32).
• As the usage environment can vary significantly, the projector lamp may not operate for 2,000 hours.
Condition
Problem
Possible Solution
The LAMP REPLACEMENT
• Lamp has been used for over 1,900
hours.
• Purchase a replacement lamp unit
(lamp cage/module) of the current
type BQC-XGNV5XU/1 from your
nearest Authorized Sharp Industrial
LCD Products Dealer or Service
Center.
indicator lights up red, and “LAMP”
and “ ” will flash in yellow in the
lower-left corner of the picture.
A significant deterioration of the
picture and color quality occurs.
• Replace the lamp. (See pages 39
and 40.) If you wish, you may have
the lamp replaced at your nearest
Authorized Sharp Industrial LCD
Products Dealer or Service Center.
The power will automatically turn
off and the projector will enter
standby mode.
• Lamp has been used for over 2,000
hours.
“LAMP” and “ ” will flash in red in
the lower-left corner of the picture,
and the power will turn off.
E-38
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Projection Lamp
It is recommended that the lamp be replaced after 1,900 cumulative hours of use or when you notice a significant
deterioration of the picture and color quality. Carefully change the lamp by following the steps below.
If the new lamp does not light after replacement, take your projector to the nearest Authorized Sharp Industrial
LCD Products Dealer or Service Center for repair.
IMPORTANT NOTE TO U.S. CUSTOMERS:
The lamp included with this projector is backed by a 90-day parts and labor limited warranty. All service of this
projector under warranty, including lamp replacement, must be obtained through an Authorized Sharp Industrial LCD
Products Dealer or Service Center. For the name of the nearest Authorized Sharp Industrial LCD Products Dealer or
Service Center, please call toll-free: 1-800-BE-SHARP (1-800-237-4277). U.S.A. ONLY
Removing and installing the lamp unit
CAUTION
• Do not remove the lamp cage directly after operation of the projector. The lamp may be extremely hot. Wait at least one
hour after the power cord is disconnected to allow the surface of the lamp cage to fully cool before removing the lamp
cage.
• Be sure to remove the lamp cage by the handle. Be sure not to touch the glass surface of the lamp cage or the inside of
the projector.
• To avoid injury to yourself and damage to the lamp, be sure to carefully follow the steps below.
• Before or after replacing the lamp, be sure to clean the air filters. See page 37 for cleaning the air filters.
Turn off the main
power.
Disconnect the power
cord.
Slide the lamp cage
cover out.
1
2
3
Press POWER OFF. After the
cooling fan stops, turn off the
MAIN POWER switch.
Unplug the power cord from the
AC socket.
Turn over the projector and un-
fasten the user service screw
that secures the lamp cage
cover. Then slide the cover in the
direction of the arrow.
Ł
or
OFF
User service
screw
Remove the lamp
cage.
Replace the lamp cage
(after changing the lamp).
Slide the lamp cage
cover in.
4
5
6
Remove the securing screws
from the lamp cage. Hold the
lamp cage by the handle and
pull it towards you.
Press the lamp cage firmly into
the lamp cage compartment.
Fasten the securing screws.
Slide the lamp cage cover in the
direction of the arrow. Then
fasten the user service screw.
Securing
screw
Securing
screw
User service
screw
E-39
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Projection Lamp
Resetting the lamp timer
Connect the power
cord.
Reset the lamp timer.
1
2
Plug the power cord into the AC
socket of the projector.
While pressing ƒ, © and
ENTER on the projector, turn on
the MAIN POWER switch.
“LAMP 0000H” is displayed, in-
dicating that the lamp timer is
reset.
Ł
• Reset the lamp timer only after replacing the lamp.
Using the Kensington Lock
This projector has a Kensington Security Standard
connector for use with a Kensington MicroSaver Security
System. Refer to the information that came with the
system for instructions on how to use it to secure the
projector.
Kensington Security
Standard connector
Troubleshooting
Problem
Check
No picture and no sound.
• Projector power cord is not plugged into the wall outlet.
• MAIN POWER switch is not on.
• The bottom filter cover is not securely installed.
• Input is wrong. (See pages 19.)
• Cables improperly connected to rear panel of the projector. (See pages 15, 16 and 17.)
• “Power” remote control batteries have run down. (See page 10.)
• Main power of the “Power” remote control is not turned on.
• “Power” remote control’s MOUSE/ADJUSTMENT switch is set to MOUSE.
Sound is heard but no picture
appears.
• Cables improperly connected to rear panel of the projector. (See pages 15, 16 and 17.)
• “Contrast” and “Bright” adjustments are set to minimum position. (See page 24.)
• On-screen Display (“BLACK SCREEN”) is turned off and Black Screen function is turned on,
creating a black image. (See page 30.)
Color is faded or poor.
Picture is blurred.
• “Color” and “Tint” adjustments are not correct. (See page 24.)
• Adjust the focus. (See page 18.)
• Projection distance is too long or too short to allow for proper focus. (See page 12.)
Picture appears but no sound is
heard.
• Cables improperly connected to rear panel of the projector. (See pages 15, 16 and 17.)
• Volume is set to minimum. (See page 19.)
An unusual sound is occasionally • If the picture is normal, the sound is due to cabinet shrinkage caused by temperature changes.
heard from the cabinet.
This will not affect operation or performance.
Maintenance indicator lights up.
• Refer to “Lamp/Maintenance Indicators” on page 38.
Data cannot be received via
IrCOM.
• Distance and angle between the projector and transmitting device are out of the designated range.
(See page 22.)
• Refer to the operation manual of the transmitting device.
• Refer to the section “Troubleshooting” in the operation manual of the supplied software.
E-40
Download from Www.Somanuals.com. All Manuals Search And Download.
Transporting the Projector
When transporting the projector, carry it by the carrying handle on the side. A soft-side carrying bag is also
provided to transport the projector.
CAUTION
Using the Carrying Handle
• Always put on the lens cap to prevent damage to the lens
when transporting the projector.
• Do not lift or carry the projector by the lens or the lens cap
as this may damage the lens.
Carrying handle
Before placing the projector into the carrying bag, set up
the inner pad inside the bag as shown.
Using the Carrying Bag
CAUTION
Projector
• The supplied carrying bag is made exclusively for the
projector and its supplied accessories. Do not place other
items into the carrying bag with the projector or use the
bag to transport items other than the projector and its
accessories.
• This bag is provided merely to transport the projector and
its accessories, not to protect these products from damage
as a result of rough handling. Do not expose these products
to shocks or impact when transported in the carrying bag.
• Wait until the projector has sufficiently cooled before placing
it into the carrying bag. If the projector is placed into the
bag while it is still hot, the heat may damage the bag lining.
Inner pad
Carrying bag
Attaching the shoulder strap to the carrying bag
Take the shoulder strap
out.
Fasten the shoulder strap
to the carrying bag.
1
2
The shoulder strap is stored in
the pocket located in front of
the carrying bag.
2 1/2Љ (6 cm)
The strap should
extend at least
2 1⁄2 Љ (6 cm) from
the buckle.
Follow the same procedure for the
other end of the strap.
E-41
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Pin Assignments
Computer Input
Analog
1. Video input (red)
2. Video input
Analog Computer 1 and 2 Signal Input
Ports: 15-pin mini D-sub female connector
9. Not connected
10. GND
11. GND
(green/sync on green)
1
3. Video input (blue)
4. Reserve input 1
5. Composite sync
6. Earth (red)
12. Bi-directional data
13. Horizontal sync signal
14. Vertical sync signal
15. Data clock
5
10
15
6
11
7. Earth (green/sync on green)
8. Earth (blue)
Pin No.
Signal
CD
RD
SD
Name
I/O
Reference
Not connected
Connected to internal circuit
Connected to internal circuit
Not connected
Connected to internal circuit
Not connected
Connected to internal circuit
Not connected
Not connected
RS-232C Port: 9-pin
D-sub male connector
1
2
3
4
5
6
7
8
9
Receive Data
Send Data
Input
Output
5
1
ER
SG
DR
RS
CS
CI
Signal Ground
Data Set Ready
Request to Send
Output
Output
6
9
RS-232C Port Specifications
PC control
A computer can be used to control the projector by connecting an RS-232C cable (cross type, sold separately) to
the projector. (See page 15 for connection.)
Communication conditions
Set the serial port settings of the computer to match that of the table on the next page.
Signal format: Conforms to RS-232C standard.
Baud rate:
Data length:
Parity bit:
9,600 bps
8 bits
NON
Stop bit:
1 bit
Flow control:
None
Basic format
Commands from the computer are sent in the following order: command, parameter, and return code. After the
projector processes the command from the computer, it sends a response code to the computer.
Command format
C1 C2 C3 C4 P1 P2 P3 P4
Command 4-digits Parameter 4-digits
Response code format
Return code (0DH)
Normal response
Return code (0DH)
Problem response (communication error or incorrect command)
Return code (0DH)
O
K
E
R
R
When more than one code is being sent, send each command only after the OK response code for the previous
command from the projector is verified.
• When using the computer control function of the projector, the projector operating status cannot be read to the computer.
Therefore, confirm the status by transmitting the display commands for each adjustment menu and checking the status with
the On-screen Display. If the projector receives a command other than a menu display command, it will execute the com-
mand without displaying the On-screen Display.
E-42
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C Port Specifications
Commands
EXAMPLE
• When “Bright” of COMPUTER 1 IMAGE ADJUSTMENT is set to
מ 10. Computer
Projector
→
←
R
A
B
R
_
מ 1
0
O
K
COMMAND
PARAMETER
COMMAND
PARAMETER
CONTROL
CONTENTS
CONTROL
CONTENTS
CONTROL ITEM
CONTROL ITEM
C1 C2 C3 C4 P1 P2 P3 P4
C1 C2 C3 C4 P1 P2 P3 P4
P
P
I
O
O
V
R
R
C
C
W
W
E
R
R
D
B
B
M
K
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
0
1
1
1
2
1
0
POWER OFF
R
R
R
R
R
R
R
R
R
R
R
R
A
A
A
I
A
A
P
B
R
B
R
R
P
B
R
B
R
R
D
D
J
I
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
*
*
*
*
CONTRAST (
מ 30 – ם 30) BRIGHT (
מ 30 – ם 30) RED (
מ 30 – ם 30) BLUE (
מ 30 – ם 30) COMPUTER 1 DISPLAY
RESET
POWER SETTING
POWER ON
VIDEO
R
D
E
E
E
I
*
*
COMPUTER 1
IMAGE
ADJUSTMENT
A
*
*
*
I
G
G
O
H
COMPUTER 1
COMPUTER 2
IrCOM
A
*
*
*
INPUT SWITCHING
INPUT CHECK
I
A
_
_
*
_
_
*
0
1
*
I
A
I
INPUT CHECK
B
CONTRAST (
מ 30 – ם 30) BRIGHT (
מ 30 – ם 30) RED (
מ 30 – ם 30) BLUE (
מ 30 – ם 30) COMPUTER 2 DISPLAY
RESET
B
R
D
E
E
E
J
*
*
*
KEYSTONE
ADJUSTMENT
*
K
E
Y
S
*
*
*
KEYSTONE
COMPUTER 2
IMAGE
ADJUSTMENT
B
*
*
*
M
M
M
M
M
M
M
M
M
M
M
M
M
V
V
V
V
V
V
W
W
V
W
I
E
E
E
E
E
E
E
E
E
E
E
E
E
A
A
A
A
A
A
B
B
A
B
M
M
M
M
M
M
M
O
U
U
A
A
A
A
L
L
A
A
A
A
A
A
A
A
Y
Y
Y
Y
Y
I
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
*
_
_
_
_
_
_
_
_
_
_
_
_
_
*
1
2
3
4
5
6
7
8
1
2
3
4
5
*
ENGLISH
DEUTSCH
ESPAÑOL
NEDERLANDS
FRANÇAIS
ITALIANO
SVENSKA
JAPANESE
AUTO
B
*
*
*
B
_
_
_
_
_
*
_
_
_
_
_
*
0
1
0
1
1
*
L
B
L
A
AUTO SYNC OFF
AUTO SYNC ON
LANGUAGE
SELECTION
COMPUTER INPUT AUTO
SYNCHRONIZATION
L
A
J
L
D
N
N
A
S
L
AUTO SYNC START
CLOCK (
מ 90 – ם 90) PHASE (
מ 60 – ם 60) H-POS (
מ 90 – ם 90) V-POS (
מ 60 – ם 60) COMPUTER INPUT DISPLAY
RESET
L
C
P
H
V
R
R
F
F
D
D
R
R
I
L
I
H
P
P
E
E
S
S
I
*
*
*
S
S
S
S
S
P
B
C
T
S
R
R
B
R
R
B
B
B
B
S
S
S
L
I
*
*
*
COMPUTER INPUT
ADJUSTMENT
PAL
I
A
*
*
*
VIDEO
SYSTEM
SELECTION
SECAM
I
A
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
0
1
0
1
0
1
0
1
0
1
0
1
0
1
NTSC 4.43
NTSC 3.58
I
A
I
M
M
M
M
M
M
M
M
M
M
M
M
FIT TO SCREEN OFF
FIT TO SCREEN ON
OSD DISPLAY OFF
OSD DISPLAY ON
REVERSE OFF
CONTRAST (
מ 30 – ם 30) BRIGHT (
מ 30 – ם 30) COLOR (
מ 30 – ם 30) TINT (
מ 30 – ם 30) SHARPNESS (
מ 30 – ם 30) RESET
I
R
O
I
*
*
*
I
*
*
*
I
I
*
*
*
I
E
E
N
N
S
S
P
P
VIDEO
IMAGE
ADJUSTMENT
H
E
D
E
E
E
G
G
G
G
I
*
*
*
I
REVERSE ON
SCREEN SETTING
_
*
_
*
1
*
I
INVERT OFF
RED (
מ 30 – ם 30) BLUE (
מ 30 – ם 30) VIDEO DISPLAY
RESET
I
I
INVERT ON
*
*
*
I
A
A
I
AUTO SYNC DISPLAY OFF
AUTO SYNC DISPLAY ON
I/P CONVERSION OFF
I/P CONVERSION ON
_
_
_
_
_
_
_
_
_
_
_
_
*
_
_
_
_
_
_
_
_
_
*
0
1
1
2
3
4
1
2
3
*
I
I
SHARP IMAGE
CUSTOM IMAGE
BLUE BACK
I
I
I
VIDEO
CONFIRMATION
BACKGROUND
SELECTION
0
S
Y
S
E
_
_
_
DISPLAY
I
I
NONE
I
I
M
M
M
M
E
B
B
K
K
O
O
S
L
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
0
1
0
1
*
BLACK SCREEN OFF
BLACK SCREEN ON
BLACK SCREEN DISPLAY OFF
BLACK SCREEN DISPLAY ON
SELECT SETTING (1–7)
I
SHARP IMAGE
CUSTOM IMAGE
NONE
STARTUP
IMAGE
SELECTION
BLACK SCREEN
I
I
I
B
I
I
I
B
V
M
M
A
A
A
A
A
E
E
E
A
E
E
VOLUME (00 – 60)
MUTE OFF
M
M
M
M
SCREEN MODE
MEMORY
VOLUME
ADJUSTMENT
T
T
T
B
R
R
_
_
*
0
1
*
E
*
SAVE SETTING (1–7)
MUTE ON
TREBLE (
מ 30 – ם 30) BASS (
מ 30 – ם 30) AUDIO DISPLAY
RESET
*
*
*
AUDIO
ADJUSTMENT
_
_
_
_
0
1
• If a dash (_) appears in the parameter column, enter a space. If an asterisk (*) appears, enter a value in the range
indicated in brackets under CONTROL CONTENTS.
• COMPUTER INPUT ADJUSTMENT can only be set in the displayed computer mode.
E-43
Download from Www.Somanuals.com. All Manuals Search And Download.
Input Signals (Recommended Timing)
The computer output signal timing of different types of computer signals are shown below for reference.
For IBM and compatibles
For Macintosh Series
VIDEO SIGNAL
VIDEO SIGNAL
HORIZONTAL
SYNC SIGNAL
e
a
b
c
d
C-SYNC(H)
VIDEO SIGNAL
VERTICAL
SYNC SIGNAL
e = 2 dot
d
a
b
c
VIDEO SIGNAL
C-SYNC(V)
w
z
x
y
w
z
x
y
V-SYNC
The following is a list of compatible VESA standards. Please note that this projector also accepts signals outside
of the VESA standards.
• Depending on the mode selected, the projector may clearly display images under 100 Hz.
HSYNC
VSYNC
FRONT
PORCH
a
BACK
PORCH
c
VIDEO
PERIOD
d
FRONT
PORCH
w
BACK
PORCH
y
VIDEO
PERIOD
z
MODE
VIDEO
1H
1V
SYNC
SYNC
1dot
1/H
1/dot
LEVEL
1/V
Hz
LEVEL
SYNC
SYNC
(a
b c d) (w
x y z) POLARITY
POLARITY
b
x
dot
640
line
350
400
400
480
480
480
480
600
600
600
600
600
768
768
768
768
768
864
960
1,024
1,024
1,200
480
480
624
768
870
LEVEL
TYPE
dot
32
32
36
8
dot
64
dot
96
dot
640
dot
µs
ns
kHz
MHz
31.500
31.500
35.500
25.175
31.500
31.500
36.000
36.000
40.000
50.000
49.500
56.250
44.900
65.000
75.000
78.750
94.500
108.000
108.000
108.000
135.000
162.000
/ ם מ מ מ מ מ מ ם ם ם ם ם ם מ מ ם ם ם ם ם ם ם מ מ מ מ מ H
32
1
1
2
1
1
1
1
1
37
1
1
0
3
3
1
1
1
1
1
1
1
3
3
1
3
3
H
3
3
3
2
3
3
3
2
4
6
3
3
4
6
6
3
3
3
3
3
3
3
3
3
3
3
3
H
H
350
400
400
480
480
480
480
600
600
600
600
600
768
768
768
768
768
864
960
1,024
1,024
1,200
480
480
624
768
870
H
445
445
446
525
520
500
509
625
628
666
625
631
817
806
806
800
808
900
1,000
1,066
1,066
1,250
525
525
667
804
915
ms
/ מ ם ם מ מ מ מ ם ם ם ם ם ם מ מ ם ם ם ם ם ם ם מ מ מ מ מ 832
26.413
26.413
26.366
31.778
26.413
26.667
23.111
28.444
26.400
20.800
21.333
18.631
28.151
20.677
17.707
16.660
14.561
14.815
16.667
15.630
12.504
13.333
31.7
31.7
28.2
39.7
31.7
31.7
27.8
27.8
25.0
20.0
20.2
17.8
22.3
15.4
13.3
12.7
10.6
9.3
37.861
37.861
37.927
31.469
37.861
37.500
43.269
35.156
37.879
48.077
46.875
53.674
35.522
48.363
56.476
60.023
68.677
67.500
60.000
63.981
79.976
75.000
60
41
42
25
20
16
25
22
23
23
21
27
20
29
29
28
36
32
36
38
38
46
39
39
39
30
39
11.754 85.080
11.754 85.080
11.759 85.039
16.683 59.940
13.735 72.809
13.333 75.000
11.764 85.008
17.778 56.250
16.579 60.317
13.853 72.188
13.333 75.000
11.756 85.061
23.000 43.479
16.666 60.004
14.272 70.069
13.328 75.029
11.765 84.997
13.333 75.000
16.667 60.000
16.661 60.020
13.329 75.025
16.667 60.000
VESA
Standard
640
64
96
640
832
720
72
108
40
720
936
Industry
Standard
VGA
640
96
640
800
640
16
16
56
24
40
56
16
32
8
40
120
120
80
640
832
VESA
Standard
640
64
640
840
640
56
640
832
800
72
128
88
800
1,024
1,056
1,040
1,056
1,048
1,264
1,344
1,328
1,312
1,376
1,600
1,800
1,688
1,688
2,160
864
VESA
Guidelines
800
128
120
80
800
SVGA
800
64
800
VESA
Standard
I
B
M
800
160
152
56
800
0.7 Vp-p
75 Ω load
R • G • B
TTL
TTL
800
64
800
Industry
Stadard
VESA
Guidelines
1,024
1,024
1,024
1,024
1,024
1,152
1,280
1,280
1,280
1,600
640
176
136
136
96
1,024
1,024
1,024
1,024
1,024
1,152
1,280
1,280,
1,280
1,600
640
24
24
16
48
64
96
48
16
64
64
78
31
35
36
160
144
176
208
256
312
248
248
304
96
XGA
96
128
112
112
144
192
64
VESA
Standard
9.3
SXGA
UXGA
9.3
7.4
6.2
1 Vp-p max.
75 Ω load
Macintosh™
28.5714 33.0688 35.0000 30.2400
28.595 31.914063 34.971149 31.334149
15.00
15.00
66.67
66.67
IIsi
13Љ Monitor
Macintosh™
LC
A
P
P
L
640
62
116
224
173
140
640
896
R • G • B
C.SYNC
0.7 Vp-p max.
16Љ Monitor
19Љ Monitor
21Љ Monitor
832
65
832
1,152
1,328
20.124
16.650
17.468
12.538
49.693
60.0
57.246
79.76
TTL
13.423 74.502
13.387 74.70
13.2826 75.2867
TTL
75 Ω load
E
Macintosh™
1,024
1,152
96
1,024
1,152
0.7 Vp-p
R • G • B
128
1,456 14.5165 9.9701
68.8874 100.300
75 Ω load H.V.C.SYNC
• This projector may not be able to display images from notebook computers in simultaneous (CRT/LCD) mode. Should this
occur, turn off the LCD display on the notebook computer and output the display data in “CRT only” mode. Details on how
to change display modes can be found in your notebook computer’s operation manual.
E-44
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Product type LCD Projector
Model XG-NV5XU
Video system PAL/SECAM/NTSC 3.58/NTSC 4.43
Display method LCD panel
ן 3, RGB optical shutter method LCD panel Panel size: 0.9Љ (13.9 [H]
ן 18.5 [W] mm) Display method: Translucent TN liquid crystal panel
Drive method: TFT (Thin Film Transistor) Active Matrix panel
No. of dots: 786,432 dots (1,024 [H]
ן 768 [V]) Lens 1–1.5
ן zoom lens, F2.0–2.6, f ס 37–55.5 mm Projection lamp AC 150 W lamp
Brightness (ANSI lumen) 600 ANSI lumens
Contrast ratio 200:1
Video input signal RCA Connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 Ω terminated
RCA Connector: AUDIO, 0.5 Vrms more than 22 kΩ (stereo)
S-video input signal 4-pin mini DIN connector
Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated
C (chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated
Horizontal resolution 700 TV lines (video input)
Audio output 2 W (monaural)
Computer RGB input signal Video signal
15-PIN MINI D-SUB CONNECTOR (Computer Input Port 1, 2): RGB separate/composite
sync/sync on green type analog input: 0–0.7 Vp-p, positive, 75 Ω terminated
STEREO MINIJACK: AUDIO, 0.5 Vrms, more than 22 kΩ (stereo)
HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative) or composite sync (Apple
only)
VERTICAL SYNC. SIGNAL: Same as above
Computer control signal 9-pin D-sub male connector (RS-232C Input Port)
Speaker system 3 3⁄32Љ (8 cm) round
Rated voltage AC 110–120/220–240 V
Input current 2.4 A/1.2 A
Rated frequency 50/60 Hz
Power consumption 270 W
Operating temperature 41°F to 104°F (
ם 5°C to ם 40°C) Storage temperature
מ 4°F to 140°F (מ 20°C to ם 60°C) Cabinet Plastic
I/R Carrier frequency 40 kHz
Laser Pointer of Remote Control Wave length: 670 nm
Max. output: 1 mW
Class II Laser Product
Dimensions (approx.) 9 1⁄64Љ (W)
ן 4 49⁄64Љ (H) ן 12 13⁄64Љ (D) (229 ן 121 ן 310 mm) (main body only) 9 19⁄32Љ (W)
ן 5 3⁄64Љ (H) ן 13 17⁄64Љ (D) (243.5 ן 128 ן 337 mm) (including an ad- justment foot and projecting parts)
Weight (approx.) 10.6 lbs. (4.8 kg)
Supplied accessories “Power” remote control, Simple presentation remote control, Four AA size batteries,
Two AAA size batteries, Power cord (9Ј 10Љ, 3 m), Computer cable (9Ј 10Љ, 3 m),
Computer audio cable (9Ј 10Љ, 3 m), Macintosh adaptor, Mouse control serial cable
(3Ј 3Љ, 1 m), Mouse control cable for IBM PS/2 (3Ј 3Љ, 1 m), Mouse control cable for
Mac (6 45⁄64Љ, 17 cm), Remote mouse receiver, Extra air filter, Lens cap (attached),
Carrying bag, CD-ROM, LCD projector operation manual, LCD projector quick
reference, Sharp Advanced Presentation Software operation manual, Sharp
Advanced Presentation Software quick reference
Replacement parts Lamp unit (Lamp/cage module) (BQC-XGNV5XU/1), “Power” remote control
(RRMCG1470CESA), Simple presentation remote control (RRMCG1480CESA), AA
size batteries (UBATU0025GEZZ), AAA size batteries (UBATU0026GEZZ), Power
cord (CACCU5013CE01), Computer cable (QCNW-5108CEZZ), Computer audio
cable (QCNW-4870CEZZ), Macintosh adaptor (QPLGJ1512CEZZ), Mouse control
serial cable (QCNW-5112CEZZ), Mouse control cable for IBM PS/2 (QCNW-
5113CEZZ), Mouse control cable for Mac (QCNW-5114CEZZ), Remote mouse
receiver (RUNTK0648CEZZ), Air filter (PFILD0076CEZZ), Lens cap
(GCOVH1307CESA), Carrying bag (GCASN0001CESA), CD-ROM (UDSKA-
0001CE01), LCD projector operation manual (TINS-6583CEZZ), LCD projector quick
reference (TINS-6598CEZZ), Sharp Advanced Presentation Software operation
manual (TINS-6601CEZZ), Sharp Advanced Presentation quick reference (TINS-
6676CEZZ)
This SHARP projector uses LCD (Liquid Crystal Display) panels. These
very sophisticated panels contain 786,432 pixels (
ן RGB) TFTs (Thin Film Transistors). As with any high technology electronic equipment
such as large screen TVs, video systems and video cameras, there
are certain acceptable tolerances that the equipment must conform
to.
This unit has some inactive TFTs within acceptable tolerances which
may result in illuminated or inactive dots on the picture screen. This
will not affect the picture quality or the life expectancy of the unit.
If you have any questions about this matter, please call toll free 1-800-
BE-SHARP (1-800-237-4277). U.S.A. ONLY
Specifications are subject to change without notice.
E-45
Download from Www.Somanuals.com. All Manuals Search And Download.
Dimensions
Rear View
Top View
3
3 5/16 (84)
3 5/16 (84)
/
4
(19)
55/64 (22)
9/32 (7)
2 7/16 (62)
2 3/4 (70)
3 1/32 (77)
1 11/16 (43)
Side View
9 19/32 (243.5)
9 1/64 (229)
13/32 (10.5)
Front View
63/64 (25)
7/16 (11)
Bottom View
Units: inches (mm)
E-46
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to Effective Presentations
Electronic presentations are one of the most effective
tools presenters can use to persuade an audience.
There are several ways to enhance your presentation
and maximize your effectiveness. The following are
guidelines to help you create and deliver a dynamic
presentation.
a.Types of Presentations
Computer Presentations
• To present basic information such as graphs, spreadsheets,
documents and images, use word processing and spreadsheet
applications.
• To convey more complex information and create more dynamic
presentations which allow you to control the pace of your delivery,
utilize software such as Astound®, Freelance®, Persuasion® or
PowerPoint®.
30
25
20
15
10
5
• For high-end multimedia and interactive presentations, use software
0
such as Macromedia Director®.
• Astound®, Freelance®, Persuasion®, PowerPoint® and Macromedia
Director® are trademarks of their respective companies.
Video Presentations
Use of video equipment, such as a VCR, DVD player and LD player,
can be effective for delivering instructional or illustrative information
that is difficult to present.
Digital Cameras and Personal digital Assistants
(PDAs)
For highly compact and portable presentations, still cameras, digital
video cameras, document cameras and PDAs are ideal for transferring
data without cumbersome conversions.
Multimedia Presentations
You can integrate all of the above methods for a full multimedia
presentation including video, audio, computer applications and World
Wide Web information.
Wireless Presentations
Use any IrDA/IrTranP compatible source such as a laptop, digital
camera or PDA to project still images quickly and effortlessly without
the use of cables.
b.Creative Presentations
Oftentimes presenters do not take advantage of the many
subtle ways they can manipulate their electronic slides to more
effectively persuade the audience.
Color has a great effect on the audience during a presentation.
When used correctly and legibly, studies show that
background & foreground colors establish an emotional tone
for a presentation, help viewers understand and retain
information, and influence an audience to take a desired
course of action.
Color Considerations
• Choose legible colors
Yellow
on Black
• Text and graphics colors need sufficient contrast.
• Use darker colors for the background since a lighter background
can create uncomfortable glare. (Yellow on black creates an ideal
contrast.)
E-47
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to Effective Presentations
• Background colors can subconsciously affect the audience:
Red—increases viewers’ pulse and breathing and
encourages risk taking but can also be associated with
financial loss.
Red
Blue—has a calming and conservative affect on the
audience but can also create boredom among corporate
audiences that are often inundated with this background
color.
Blue
Green—stimulates interaction.
Green
Black
Black—conveys finality and certainty. Use it as a transitional
color between slides when moving from one idea to another
• Foreground colors create a major impact on how well an
audience understands and remembers a message.
• Use one or two bright colors for emphasis.
• Highlight important messages.
• The eye has a difficult time reading certain colored text on
certain colored backgrounds. For example, text and
background colors in red and green, and blue and black
make for difficult viewing.
• Colorblind individuals may find it difficult to distinguish
between red and green, brown and green, and purple and
blue. Avoid using these colors together.
Fonts
• One of the most common mistakes in any type of
presentation visual is the selection of type fonts that are too
small, too thin, or too difficult to read.
Presentation from SHARP
istakes in any type of
m
on
ost comm
One of the
m
presentation visual is the selection of type fonts
that are too small, too thin, or hard to read.
• If you’re not sure how well a given font will read on a screen
at various sizes, try this: Draw a 6″
ן 8″ box on a piece of paper and print out several lines of text inside the box with
your computer printer at 300 or 600 dpi resolution. Vary the
sizes of text to simulate headline, body and text call-outs
for any charts or graphs. Hold the printout at arm’s length.
This is how your text will look on a 4 feet (1.2 meters)-wide
screen at 10 feet (3 meters), on a 7.5 feet (2.3 meters)-wide
screen at 20 feet (6.1 meters) and a 12 foot (3.7 meters)-
wide screen at 30 feet (9.1 meters). If you cannot read the
text easily, you should put less copy on your visuals or use
larger typefaces.
• Design your visuals so that they are visible by the viewer in
the last row.
• Nothing will ruin your presentation faster than misspelled
words. Take the time to proofread and edit your work before
your visuals become a permanent part of your presentation.
• Mixed case text is easier to read than text which is displayed
in capital letters.
• Another important attribute of fonts is whether any particular
face is serif or sans-serif. Serifs are small, usually horizontal
cross strokes that are added to the end of a letter’s main
strokes. Because of their ability to coax the eye along the
line of type, fonts with serifs are generally acknowledged to
be more readable.
Sans-serif
Serif
E-48
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to Effective Presentations
c.Set-Up
Good
Bad
Good
When giving a presentation, you need to set the stage both
figuratively and literally for success. The way you set up a
presentation room will have a great impact on the audience’s
perception of you and your message. By manipulating the
placement and use of the following tools, you will improve the
impact of your presentation.
Presentation from SHARP
Lighting—Good lighting is an important component of a
successful presentation. You should strive to create an unequal
distribution of light. An audience should always see as much
of the presenter’s face as possible, so most of the light should
be focused on you. Because it is important for you to be able
to read the audience’s faces and body language, some light
should be shed upon them. However, no light should shine
on the screen.
30
25
20
15
10
5
0
Stage— When presenting on the same level surface that your
audience is on, most people can only see the top one-third of
your body. Therefore, it is recommended that when giving a
presentation to an audience of 25 or more, you stand on a
stage or platform. As more of your body is visible, the easier
it is to communicate with an audience.
Podiums—The best presenters avoid podiums because they
hide 75% of the body and restrict movement. However, many
people feel more comfortable with a podium to hold their notes
and hide their discomfort. If you must use a podium, angle it
at 45 degrees to the audience so that you are not completely
hidden.
Visuals—It is imperative that you make sure your visuals are
large enough and projected far enough for the audience to
see. Eight times the height of an image is the optimal viewing
distance to read 24 point type. The bottom of a screen should
be at least 6 feet (1.8 meters) above the floor.
Screen—The screen should always be in the center of the
room so that all audience members can see it. Because people
read from left to right, you should always stand to the
audience’s left when discussing visuals.
Seating—Arrange seating according to the dynamics of your
presentation. If the presentation is more than half-a-day, use
classroom style seating—a chair and a desk. If you would
like to encourage audience interaction, use chevron seating,
angling the chairs into a “V” shape. When you have a very
small audience, a “U” shaped arrangement will increase
interchange.
E-49
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to Effective Presentations
d.Rehearsing & Delivery
• The best time to rehearse is the day or evening before,
not a couple of hours before, and the best place to
rehearse is in the actual room. Rehearsing a speech
in a small office is not the same as standing up in
front of 100 people in a hotel ballroom or classroom.
• Due to varying processor speeds of computers,
practice your slide transitions for proper timing.
• Whenever possible, set up your equipment well in
advance to allow adequate time to resolve any
unexpected issues such as lighting, power, seating
and audio.
• Thoroughly check every piece of equipment you bring
along. Make sure you have fresh batteries in your
remote controls and laptop computer. Fully charge
your computer’s battery before the presentation and
connect your AC adaptor for added safety.
• Make sure you are completely familiar with the control
panel on your projector and remote controls.
• If you are using a microphone, check it out before
hand and walk around to see where you might have
problems with feedback. Avoid standing in these
problem areas during your presentation.
e.Presentation Tips
• Before beginning, visualize yourself delivering an
outstanding presentation.
• Know your speech, memorizing at least the first three
minutes of your presentation will allow you to focus
on your rhythm and pacing.
• Speak to early arrivals to help you build a rapport
with the audience and make you feel more
comfortable.
• Don’t be overly dependent on your visuals by reciting
what your audience is already reading. Know your
material well enough to be able to deliver the
presentation with ease. Use your visuals to emphasize
keypoints.
• Be sure to project your voice clearly and use eye
contact to maintain audience attention.
• Do not wait until half way through your presentation
to get your point across. If you wait and try to create a
“build-up”, you may lose some of your audience along
the way.
• Keep your audience’s attention. As most people only
focus for 15 to 20 minutes during a one hour
presentation, it is important to recapture their attention
periodically. Use phrases like, “This is critical to my
point” or “This is absolutely fundamental” to remind
them you are saying something they need to hear.
E-50
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Aspect ratio
Width and height ratio of an image. The normal aspect ratio of a computer and video image is 4 : 3. There are also wide images with an
aspect ratio of 16 : 9 and 21 : 9.
ANSI lumen
Brightness unit established by the American National Standards Institute.
Auto sync
Optimizes projected computer images by automatically adjusting certain characteristics.
Background
Initial setting image projected when no signal is being input.
Clock
Clock adjustment is used to adjust vertical noise when clock level is incorrect.
Compatibility
Ability to use with various image signal modes.
Composite sync
Signal combining horizontal and vertical sync pulses.
Digital keystone correction
Function to digitally correct a distorted image when the projector is set up at an angle.
Dot by dot mode
Mode that projects images in their native resolution.
Enlarge
Digitally zooms in on a portion of an image.
Fit to screen
Function to adjust an image without keeping a native aspect ratio other than 4 : 3, and project it in a 4 : 3 ratio.
Freeze
Function to freeze a moving image.
GUI
Graphical User Interface. User interface with graphics that allow easier operation.
I/P conversion
Function to convert an image between “Interlaced” and “Progressive” scan displays.
Intelligent compression
High quality resizing of lower and higher resolution images to fit the projector’s native resolution.
IrCOM
Function to transmit still images from a computer, hand-held PC or digital still camera via infrared communication for “Wireless
Presentations”.
PDF
Portable Document Format. Documentation format used to transfer text and images from the CD-ROM.
Phase
Phase shift is a timing shift between isomorphic signals with the same resolution. When phase level is incorrect, the projected image
typically displays horizontal flicker.
Presentation tools
Helpful tools used to emphasize keypoints throughout a presentation.
RS-232C
Function to control the projector from the computer by using the RS-232C ports on the projector and computer.
Startup image
The image displayed when the projector is turned on.
Status function
Displays the settings of each adjustment item.
Sync
Synchronizes the resolution and phase shift of two signals. When receiving an image with a resolution different from that of the computer,
the projected image may be distorted.
Sync on green
Video signal mode of a computer which overlaps horizontal and vertical sync signal to green color signal pin.
Wireless mouse control
Function to operate the mouse control of the computer with the supplied remote control.
XGA resolution
The resolution with 1,024
ן 768 pixels that uses the signal of an IBM/AT compatible (DOS/V) computer. E-51
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A
L
AA size batteries .............................................................. 10
AC socket......................................................................... 18
ADJUSTMENT buttons..................................................... 20
Air filter ............................................................................. 37
Aspect ratio saving .......................................................... 31
Audio adjustment ............................................................. 25
AUDIO INPUT terminals................................................... 17
AUDIO OUTPUT terminal................................................. 17
Auto sync adjustment ...................................................... 27
AUTO SYNC button.......................................................... 27
Automatic power shutoff when receiving
LAMP REPLACEMENT indicator...................................... 38
Language selection ......................................................... 23
LASER POINTER button................................................... 11
LEFT-CLICK button .......................................................... 11
Lens cap .......................................................................... 41
M
Macintosh adaptor ........................................................... 16
MAIN POWER switch ....................................................... 18
MENU button.................................................................... 20
MOUSE/ADJUSTMENT switch......................................... 11
Mouse control cable for IBM PS/2 ................................... 15
Mouse control cable for Mac ........................................... 15
Mouse control serial cable ............................................... 15
MUTE button .................................................................... 19
no signals ................................................................... 36
B
Background selection ...................................................... 32
BACKLIGHT button.......................................................... 11
BLACK SCREEN button ................................................... 30
O
Opening image ................................................................ 33
C
Carrying bag .................................................................... 41
Carrying handle ............................................................... 41
Ceiling-mount................................................................... 13
Ceiling
ם Rear ................................................................... 34 Computer audio cable ..................................................... 15
COMPUTER AUDIO INPUT terminal................................ 15
Computer cable ............................................................... 15
COMPUTER INPUT 1 port ............................................... 15
COMPUTER INPUT 2 port ............................................... 15
P
PDF ..................................................................................
6
Picture adjustment ........................................................... 24
POWER buttons ............................................................... 18
Power cord ....................................................................... 18
POWER indicator ............................................................. 18
R
Rear projection................................................................. 12
Remote control ................................................................. 11
Remote control sensor ..................................................... 10
Remote mouse receiver ................................................... 10
RIGHT-CLICK button ........................................................ 11
RS-232C port ................................................................... 15
Cooling fan (Exhaust vent)...............................................
Cooling fan (Intake vent)..................................................
4
4
D
Dot by dot ........................................................................ 29
E
S
ENLARGE button ............................................................. 29
ENTER button................................................................... 20
Extra air filter .................................................................... 37
Speaker............................................................................
8
Startup image .................................................................. 33
Status confirmation .......................................................... 19
S-VIDEO INPUT terminal.................................................. 17
F
Fit to screen ..................................................................... 31
Focus knob ...................................................................... 18
Foot release ..................................................................... 14
FREEZE button................................................................. 33
T
TEMPERATURE WARNING indicator ............................... 38
TOOLS button .................................................................. 35
V
G
VIDEO INPUT terminal ..................................................... 17
GUI................................................................................... 20
VOLUME buttons ............................................................. 19
I
Z
Image memory ................................................................. 28
Image transmission software ........................................... 22
INPUT SELECT button ..................................................... 19
Input signal confirmation ................................................. 19
I/P conversion .................................................................. 31
Zoom knob ....................................................................... 18
K
Kensington Security Standard connector ........................ 40
KEYSTONE button ........................................................... 14
E-52
Download from Www.Somanuals.com. All Manuals Search And Download.
SHARP CORPORATION
OSAKA, JAPAN
Printed in Japan
-
TINS 6583CEZZ
-
T2028 A
-
8P11 JWG
Download from Www.Somanuals.com. All Manuals Search And Download.
|