Thank you for purchasing this SHARP product.
To obtain the best performance from this product, please read this
manual carefully. It will guide you in operating your SHARP product.
ne
ho
iP
&
od
DK-CL5PiP
R
O
G
IN
F
M
E
T
TUN
S
Y
S
IC
S
U
M
MORY
®
CLOCK
/
ME
CK
A
TR
T
E
S
E
R
P
MUSIC SYSTEM FOR iPod
& iPhone
E
ER
M
IM
D
VOLUM
M
R
A
AL
®
CTION
N
FU
Y
PLA
DIS
T
E
S
-BY
E
D
R
AN
M
R
ALA
/
ST
ON
MODEL
DK-CL5P
Accessories
Please confirm that only the following accessories are included.
(Remote control x 1)
(Coin Battery x 1)
OPERATION MANUAL
Remote control unit (x 1)
92L34900034101
AC/DC adaptor x 1
92L88900034101
iPhone adaptor 12
iPhone adaptor 15
iPhone adaptor 19
iPhone, iPod, iPod classic,
iPod nano, and iPod touch are
trademarks of Apple Inc.,
registered in the U.S. and
92L43200033101
92L43200033201
92L43200033301
Download from Www.Somanuals.com. All Manuals Search And Download.
other countries.
DK-CL5P
IMPORTANT SAFETY INSTRUCTIONS
Electricity is used to perform many useful functions, but it can
also cause personal injuries and property damage if improperly
handled. This product has been engineered and manufactured
with the highest priority on safety. However, improper use can
result in electric shock and/or fire. In order to prevent potential
danger, please observe the following instructions when
installing, operating and cleaning the product. To ensure your
safety and prolong the service life of this product, please read
the following precautions carefully before use.
12) Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when
unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
Additional Safety Information
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
15) Power Sources - This product should be operated only from
the type of power source indicated on the marking label. If
you are not sure of the type of power supply to your home,
consult your product dealer or local power company. For
product intended to operate from battery power, or other
sources, refer to the operating instructions.
7) Do not block any ventilation openings. Install in accordance
with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
16) Overloading - Do not overload wall outlets, extension cords,
or integral convenience receptacles as this can result in a
risk of fire or electric shock.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
17) Object and Liquid Entry - Never push objects of any kind into
this product through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the product.
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
DK-CL5P
IMPORTANT SAFETY INSTRUCTIONS (continued)
18) Damage Requiring Service - Unplug this product from the
wall outlet and refer servicing to qualified service personnel
under the following conditions:
22) Power Lines - An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside antenna
system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be
fatal.
a) When the AC cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the
product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following
the operating instructions. Adjust only those controls
that are covered by the operating instructions as an
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the product to its normal
operation,
23) Protective Attachment Plug - The product is equipped with
an attachment plug having overload protection. This is a
safety feature. See Instruction Manual for replacement or
resetting of protective device. If replacement of the plug is
required, be sure the service technician has used
a
replacement plug specified by the manufacturer that has the
same overload protection as the original plug.
e) If the product has been dropped or damaged in any
way, and
24) Stand - Do not place the product on an unstable cart, stand,
tripod or table. Placing the product on an unstable base can
cause the product to fall, resulting in serious personal
injuries as well as damage to the product. Use only a cart,
stand, tripod, bracket or table recommended by the
manufacturer or sold with the product. When mounting the
product on a wall, be sure to follow the manufacturer's
f ) When the product exhibits
a
distinct change in
performance - this indicates a need for service.
19) Replacement Parts - When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer or have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other
hazards.
instructions.
Use
only
the
mounting
hardware
recommended by the manufacturer.
20) Safety Check - Upon completion of any service or repairs to
this product, ask the service technician to perform safety
checks to determine that the product is in proper operating
condition.
21) Wall or ceiling mounting - When mounting the product on a
wall or ceiling, be sure to install the product according to the
method recommended by the manufacturer.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
DK-CL5P
SPECIAL NOTES
Contents
Page
ENERGY STAR ® Program Information
■
General Information
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Controls and indicators . . . . . . . . . . . . . . . . . . 7 - 9
Products that have earned the
®
■
Preparation for Use
ENERGY STAR are designed
to protect the environment
through superior energy
efficiency.
System connections . . . . . . . . . . . . . . . . . . 10 - 11
Remote control . . . . . . . . . . . . . . . . . . . . . . . 12 - 13
■
Basic Operation
General control . . . . . . . . . . . . . . . . . . . . . . . 13 - 14
Setting the time and date . . . . . . . . . . . . . . . . . . . 15
ENERGY STAR® is a U.S. registered mark.
■
iPod and iPhone
Listening to the iPod or iPhone . . . . . . . . . 16 - 18
■
USB Memory Playback
Listening to USB mass storage device/
SD Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 - 20
■
Radio
Listening to the radio . . . . . . . . . . . . . . . . . . 20 - 22
■
Advanced Features
Alarm and sleep operation . . . . . . . . . . . . . 22 - 25
Enhancing your system . . . . . . . . . . . . . . . . 25 - 26
■
References
Troubleshooting chart . . . . . . . . . . . . . . . . . 26 - 28
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Specifications . . . . . . . . . . . . . . . . . . . . . . . . 29 - 30
CONSUMER LIMITED WARRANTY . . . .Back cover
Download from Www.Somanuals.com. All Manuals Search And Download.
5
DK-CL5P
Precautions
■
General
●
Hold the AC/DC adaptor by the
head when removing it from the
AC outlet, as pulling the cord
can damage internal wires.
● Please ensure that the equipment is
positioned in a well-ventilated area
and ensure that there is at least
4" (10 cm) of free space along the
sides, top and back of the equipment.
4" (10 cm)
● The AC/DC adaptor is used as
a disconnect device and shall
always remain readily
operable.
4" (10 cm)
● Use the unit on a firm, level surface
● Do not remove the
outer cover, as this
may result in electric
shock. Refer internal
service to your local
SHARP service
free from vibration.
D
YS
TE
K
-
C
M
L
F
5
O
P
R
i
P
o
d
&
i
P
h
o
n
e
M
U
S
I
C
S
T
U
N
I
N
G
V
O
L
U
M
E
/
C
L
O
C
K
M
E
M
D
I
T
R
A
A
L
A
R
M
P
R
F
U
N
C
T
I
O
N
Y
O
N
/
S
TA
N
D
-
B
E
S
A
L
A
R
M
R
FM ANTENNA
VIDEO OUT
AUDIO IN
DC IN 8V
facility.
●
Keep the unit away from direct
sunlight, strong magnetic
fields, excessivedust, humidity
and electronic/electrical
equipment (home computers,
facsimiles, etc.) which
generate electrical noise.
● This unit should only be used within the range of 41°F - 95°F
(5°C - 35°C).
● To prevent fire or shock hazard, do not expose this appliance
to dripping or splashing. No object filled with liquids, such as
vases shall be placed on the apparatus.
D
K-CL
5P
R
e
M
U
S
I
C
S
Y
S
T
E
M
F
O
i
P
o
d
&
i
P
h
o
n
T
U
NI
NG
V
O
L
U
M
E
M
E
M
O
R
Y
/
C
LO
C
K
D
M
M
A
L
ARM
F
U
N
C
T
I
O
N
P
R
E
S
E
T
T
R
A
C
K
O
N
/
S
TA
N
D
-
B
Y
A
L
A
R
M
R
E
S
Warning:
● Do not place anything on top of the unit.
● Do not expose the unit to moisture, to temperatures higher
The voltage used must be the same as that specified on this
unit. Using this product with a higher voltage other than that
which is specified is dangerous and may result in a fire or other
type of accident causing damage. SHARP will not be held
responsible for any damage resulting from use of this unit with a
voltage other than that which is specified.
than 140°F (60°C) or to extremely low temperatures.
● If your system does not work properly, disconnect the AC/DC
adaptor from the AC outlet. Plug the AC/DC adaptor back in,
and then turn on your system.
● In case of an electrical storm,
unplug the unit for safety.
■
Volume control
The sound level at a given volume setting depends on speaker
efficiency, location and various other factors. It is advisable to
avoid exposure to high volume levels, which occurs while
turning the unit on with the volume control setting up high, or
Download from Www.Somanuals.com. All Manuals Search And Download.
while continually listening at high volumes.
6
DK-CL5P
Controls and indicators
■
Top panel
Reference page
1
2
3
PRESET TRACK
5
1. USB Slot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
2. iPod and iPhone Dock . . . . . . . . . . . . . . . . . . . . . . . 17
3. Memory Card Slot . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
4. Volume Down / Up Knob . . . . . . . . . . . . . . . . . . . . . 14
5. ON/STAND-BY / FUNCTION
Alarm Reset Button . . . . . . . . . . . . . . . . . . . 13, 19, 23
6. Alarm 1/Display Button . . . . . . . . . . . . . . . . . . . . 22, 23
7. Alarm 2/Display Button . . . . . . . . . . . . . . . . . . . 22, 23
8. SNOOZE / DIMMER Button . . . . . . . . . . . . . 13, 23, 28
9. Preset / Track Down Button . . . . . . . . . . . . . . . . 15, 18
10. Preset / Track Up Button . . . . . . . . . . . . . . . . . . 15, 18
11. Memory / Clock / Play / Pause Button . . . . . 15, 18, 19
12. Tuning Down / Up Knob . . . . . . . . . . . . . . . . . . . . . 20
DK-CL5P
MUSIC SYSTEM FOR iPod
&
iPhone
VOLUME
TUNING
FUNCTION
CLOCK
/
MEMORY
ALARM
DIMMER
ON STAND-BY
/
ALARM RESET
DISPLAY
8
4
5 6
7
9
10 11
7 6
12
■
Display
2
3
4
8
Reference page
1. Alarm (1 and 2) indicator. . . . . . . . . . . . . . . . . . . . . . 22
2. iPod indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
3. USB indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
4. SD Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
5. Sleep Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
6. Nap Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
7. FM Tuner Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 21
8. Day Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
iPod USB SD
SLEEP
1
2
iPod
iPod
AM
FM
PM
1
2
MHz
Radio
Radio
1
2
Buzzer
Buzzer
MON TUE WED THU FRI SAT SUN
1
Download from Www.Somanuals.com. All Manuals Search And Download.
7
DK-CL5P
Controls and indicators (continued)
The iPod rating label (*)
1A
The spec label (*)
The spec label illustration may be different
from the actual label used.
(*) Label is located at the bottom of the unit.
1
■
Bottom view
Reference page
1. Battery Compartment . . . . . . . . . . . . . . . . . . . . . . . 11
■
Rear panel
Reference page
1. FM Antenna Wire (fixed). . . . . . . . . . . . . . . . . . . . . . 25
2. Video Out Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3. Audio In Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
4. DC Input Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
VIDEO OUT
AUDIO IN
DC IN 8V
FM ANTENNA
1
2
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.
8
DK-CL5P
■
Remote control
9
Reference page
1
2
1. Remote Control
Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2. ON/STAND-BY/Alarm
Reset Button . . . . . . . . . . . . . . . . . . . . . . 13, 15, 19, 20
3. Menu Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
4. Tuning Up/Down/Fast Forward/Next/
10
11
12
3
13
Fast Reverse/Prev Button . . . . . . . . . . . 15, 18, 19, 20
5. Preset/Folder Up and Down Buttons . . . . . . . . 18, 22
6. Equalizer Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
7. NAP Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
8. Alarm 1 and Alarm 2 Button . . . . . . . . . . . . . . . 22, 23
9. Function Button . . . . . . . . . . . . . . . . . . . 10, 17, 21, 26
10. Display (TV Out) Button . . . . . . . . . . . . . . . . . . . 10, 18
11. Clock/Memory/Play/Pause Button . . . . . . . . 15, 18, 19
12. Enter Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 18
13. Shuffle Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
14. Repeat Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
15. Volume Up and Down Buttons . . . . . . . . . . . . . . . . 13
16. Mute Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
17. Sleep Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
4
14
15
5
6
7
16
17
8
Download from Www.Somanuals.com. All Manuals Search And Download.
9
DK-CL5P
System connections
AC/DC adaptor connection
Make sure to unplug the AC/DC adaptor before making any connections.
1
2
Plug the AC/DC adaptor cable into the DC IN jack on
the unit.
Connecting iPod or iPhone to TV
Video files from iPod or iPhone can be viewed by connecting the system to
TV/monitor.
Plug the AC/DC adaptor into an AC outlet.
If the TV/monitor has a video input, connect it to the VIDEO OUT jack at the
back of the unit and set the TV Out on the iPod unit to “ON” position.
1
Video cable
(not supplied)
TV
AC/DC Adaptor Cable
VIDEO OUT
O
OUT
AUDIO IN
DC IN 8V
NA
VIDEO OUT
AUDIO IN
DC IN 8V
DC IN Jack
(DC 8V)
2
To video input jack
Watching videos on a TV connected to iPod
1
2
Press the FUNCTION button on the main unit or remote
control to select the iPod function.
FM ANTENNA
VIDEO OUT
AUDIO IN
DC IN 8V
Enter the iPod or iPhone menu.
Press and hold DISP(TV OUT) button on the remote control or
ALARM 1 (DISPLAY) button on the main unit until ON appear
on the display.
AC Outlet
(AC 100 - 240 V, 50/60 Hz)
3
4
Select the desired video to be played.
Notes:
Press the ENTER button on the remote control to start playback.
Unplug the AC/DC adaptor from the AC outlet if the unit will
not be used for a prolonged period of time.
Use only the supplied AC/DC adaptor. Using other AC/DC
adaptor may cause an electric shock or fire.
Connecting the AC/DC adaptor to the unit disconnects the
batteries.
During unit operational with batteries, iPod or iPhone
attached can be used for playback only.
Notes:
To return to watch video on iPod or iPhone screen, return to the menu. Press
and hold the DISP(TV OUT) on remote control or ALARM 1 (DISPLAY) on
the main unit until “OFF” appear on the display.
During iPod or iPhone video playback, press and hold the DISP(TV OUT) on
the remote control or ALARM 1 (DISPLAY) on the main unit until “OFF”
appear will not toggle video out display between iPod or iPhone and TV.
Please make sure to set iPod unit to either NTSC or PAL to match your TV
signal. Please visit Apple’s home page for further information.
Customer should also refer iPod and iPhone operation manual before
making video out setting.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT, FULLY INSERT.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
DK-CL5P
Notes:
■
Install/Replace batteries
● The battery system is use to provide continuous alarm
operation and clock setting in event of a power failure. Please
make sure the AC/DC adaptor is connected, otherwise all
setting may be lost during battery replacement.
● Remove the batteries if the unit will not be used for a long
period of time to prevent battery leakage which may cause
potential damage.
Use 6 “C” size batteries (UM-2/R14 or similar).
Batteries are not included.
For Backup battery:
Use 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar).
Batteries are not included.
● Connecting the AC/DC adaptor to the unit disconnects the
batteries.
● The first time the batteries is install, the clock will blinking on
the display. Please set the time and date (refer page 15).
1
2
Open the battery cover.
Insert the batteries according to the direction
indicated in the battery compartment.
When inserting or removing the batteries, push them
Note:
towards the
battery terminal.
–
Battery life may vary depending on the temperature, battery
types and usage conditions.
3 Close the cover.
Precautions for battery use:
● Installing the batteries incorrectly may cause the unit to
malfunction.
H
O P E N
● Insert the batteries according to the direction indicated in the
battery compartment.
S
P U
H
O P E N
S
P U
● Replace all old batteries with new ones at the same time.
● Do not mix old and new batteries.
● Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the like.
Caution:
Do not use rechargeable batteries (nickeI-cadmium battery, etc.).
Download from Www.Somanuals.com. All Manuals Search And Download.
11
DK-CL5P
Remote control
Precautions for battery use:
■
Battery installation
● Remove the battery if the unit will not be used for long periods
of time. This will prevent potential damage due to battery
leakage.
This product contains a CR Coin Lithium Battery which contains
Perchlorate Material – special handling may apply. California
Note:
Caution:
Before using remote control, please remove plastic shield at
● Do not use rechargeable battery (nickel-cadmium battery,
etc.).
battery holder.
1
Whilst pushing the locking tab towards the center of the
remote control, slide out the battery holder.
● Danger of explosion if battery is incorrectly replaced.
● Replace only with the same or equivalent type.
● Batteries (battery pack or battery installed) shall not be
exposed to excessive heat such as sunshine, fire or the like.
● Installing the battery incorrectly may cause the unit to
malfunction.
Back of remote
Plastic
control
shield
Remote
control
Notes concerning use:
● Replace the battery if the operating distance is reduced or if
the operation becomes erratic. Purchase “CR 2025” 3 V, coin
lithium battery.
Locking tab
Battery holder
● Periodically clean the transmitter on the remote control and
the sensor on the unit with a soft cloth.
2
Remove the old battery from the battery holder, insert the
new battery and then slide the battery holder back into the
remote control.
● Exposing the sensor on the unit to strong light may interfere
with operation. Change the lighting or the direction of the unit
if this occurs.
● Keep the remote control away from moisture, heat, shock,
and vibrations.
Battery holder
Positive (+)
side up
Polarity(+)
symbol
Battery type
Locking tab
Download from Www.Somanuals.com. All Manuals Search And Download.
12
DK-CL5P
General control
DK-CL5P
MUSIC SYSTEM FOR iPod
■
Test of the remote control
&
iPhone
Check the remote control after checking all the connections
(see pages 10 - 11).
VOLUME
TUNING
Point the remote control directly at the remote sensor on the
unit.
The remote control can be used within the range shown
below:
FUNCTION
PRESET TRACK
CLOCK
/
MEMORY
ALARM
DIMMER
ON / STAND-BY
Remote sensor
ALARM RESET
DISPLAY
DIMMER
VOLUME
FUNCTION
ON / STAND-BY
ALARM RESET
8" - 20'
(0.2m - 6m)
15°
15°
■
To turn the power on
Press the ON/STAND-BY button to turn the power on.
The first time power is supplied to the unit, the clock will be
blinking on the display. Please set the time and date
(refer page 15).
After use:
Press and hold the ON/STAND-BY button to enter the power
stand-by mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
DK-CL5P
General control (continued)
■
Display brightness control (DIMMER)
■
Equalizer
Press the SNOOZE/DIMMER button to adjust the brightness of
LCD display.
Press the EQUALIZER button repeatedly until the desired
sound mode appears.
Equalizer off.
E-FL
Dimmer 1
Dimmer 2
(Display is dim)
For rock music.
For classical music.
For pop music.
For jazz music.
E-ro
(Display gets dimmer)
E-CL
E-Po
E-JA
Dimmer off (Display is bright)
Note:
● Setting dimmer to display in the brightest mode during battery
operation will affect battery life.
● During battery operations in standby mode, the brightness of
display will automatically go to the lowest mode (dim OFF)
after 5 seconds.
■
Volume auto set in
If you turn off and on the main unit with the volume set to 17 or
higher, the volume starts at 16.
■
Volume control
Main unit operation:
Rotate the Volume knob anti-clockwise to
decrease volume and clockwise to
increase volume.
Remote control operation:
Press the VOLUME (+ or –) button to
increase or decrease the volume.
Volume indicator will be blinking when the
volume reaches maximum or minimum
level.
■
Muting
The volume will muted temporarily when pressing the MUTE button
on the remote control. L-00 will be blinking on the display. Press
the MUTE button again to restore the volume.
“
”
Download from Www.Somanuals.com. All Manuals Search And Download.
14
DK-CL5P
Setting the time and date
2 Press the
or
button to adjust the hour and then
MUSIC SYSTEM FOR iPod
&
iPhone
press the CLOCK/MEMORY button.
VOLUME
TUNING
PM
FUNCTION
CLOCK
/
MEMORY
PRESET TRACK
ALARM
DIMMER
ON / STAND-BY
Press the ( or ) button once to advance the time by 1
hour. Hold it down to advance continuously.
“AM” or “PM” indicator will interchange after each 12 hour
cyclic.
ALARM RESET
DISPLAY
3
4
Press the
or
button to adjust the minutes and
then press the CLOCK/MEMORY button.
PM
Press the ( or
1 minute. Hold it down for about 5 seconds to change the
time in 5-minutes interval.
) button once to advance the time by
Press the
press the CLOCK/MEMORY button.
or
button to adjust the day and then
In this example, the clock is set for the 12-H (12 hour) display.
1
In standby mode, press the CLOCK/MEMORY button
for more than 2 seconds. The clock time display format
PM
will blinking. Press the (
or
) button to select
12-H or 24-H for clock time display format, then press
SUN
CLOCK/MEMORY to confirm.
“:” will be blinking to indicate time and date setting is
completed.
Note:
During battery operations in standby mode, press the SNOOZE/
DIMMER button to display the clock for about 5 seconds.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
DK-CL5P
Listening to the iPod or iPhone
iPod and iPhone operations
■
iPod and iPhone adaptor connection
Made for:
● iPhone 4
Note:
You can use an audio cable to connect your iPod or iPhone to
the AUDIO IN socket if:
● iPhone 3GS
● iPhone 3G
● iPhone
● iPod touch (3 generation)
● iPod touch (2 generation)
1. Your iPod or iPhone adaptor does not fit into the dock on the
main unit.
rd
nd
2. You have an iPod or iPhone that does not have an iPod or
iPhone adaptor.
st
● iPod touch (1 generation)
● iPod classic
● iPod with video
● iPod nano (5 generation)
● iPod nano (4 generation)
● iPod nano (3 generation)
● iPod nano (2 generation)
● iPod nano (1 generation)
● iPod with colour display
3. You have an iPod that does not have an iPod 30 pin
connector.
th
th
iPhone
Adaptor No.
rd
iPhone Description
Capacity
nd
12
15
15
19
iPhone
4GB & 8GB & 16GB
8GB & 16GB
16GB & 32GB
16GB & 32GB
st
iPhone 3G
iPhone 3GS
iPhone 4
● iPod mini
Caution:
● Please update your iPod unit to the latest software version
before using it. Please visit Apple’s homepage to download
the latest version for your iPod.
Notes:
● Once the iPod or iPhone is connected to the unit it will begin
charging.
● If you have an iPod or iPhone that does not have an iPod 30
Pin connector, you can use an auxillary cable to connect it to
the AUDIO IN jack.
● The message “This accessory is not made to work with
iPhone” or similar, may appear on the iPhone screen when:
-
-
battery is low.
the iPhone is not properly docked (eg. slanting).
If this occurs, remove and re-dock the iPhone.
● The iPod or iPhone will not be charged while the main unit
uses batteries as power supply.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
DK-CL5P
Listening to the iPod or iPhone (continued)
■
To insert iPod or iPhone adaptor
iPod and iPhone
1. Insert the iPod or iPhone adaptor into unit and connect your
iPod or iPhone.
■
iPod or iPhone playback
1
2
Press the ON/STAND-BY button to turn the power on.
iPhone (bottom)
iPhone
Press the FUNCTION button on main unit or remote
control to select the iPod function.
3
Insert iPod or iPhone unit into the dock of main unit.
Dock connector
iPhone
iPhone adaptor
CL5P
DK-
MUSIC SYSTEM FOR
e
&
iP
hon
Pod
i
iPhone dock
E
R
S
E
P
R
ME
DIM
ARM
AL
N
FUNCTIO
/
STAND-BY
ON
ET
iPhone connector
4
Press the ENTER button on the remote control to start
playback.
For iPod touch and iPhone, playback will automatically
start once the desired file is selected.
Caution:
Unplug all accessories for the iPod or iPhone before inserting it
into the dock.
■
To disconnect iPod or iPhone
Simply remove the iPod or iPhone from the dock. It is safe to do
so even during playback.
■
To remove iPod or
iPhone adaptor
Insert the tip of a screwdriver (“-”
type, small) into the adaptor hole as
shown and lift upward to remove.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
DK-CL5P
Listening to the iPod or iPhone (continued)
■
Various iPod or iPhone functions
Function
Menu
Main unit
Remotecontrol Operation
Function
Main unit
Remotecontrol
Operation
Press to view
the iPod and
iPhone menu
____
Play
Press in the
pause mode.
CLOCK/MEMOR
K/MEMORY
CLOCK MEMORY
MENU
during iPod
and iPhone
function.
Enter
Press to
Pause
Press in the
playback
mode.
____
____
____
CLOCK/MEMOR
K/MEMORY
CLOCK MEMORY
PRESET TRACK
confirm the
ENTER
selection.
Cursor
Repeat
Press to
PRESET/FOLDER
Track
up/down
Press in the
playback or
select iPod
TUNING
and iPhone
menu.
pause mode.
If you press the
button in the
pause mode,
Press to
select repeat
mode.
press the
/
button to start
the desired
track.
Shuffle
Press to turn
on/off shuffle
mode.
____
Fast
forward/
reverse
Press and hold
down in the
playback
TUNING
PRESET TRACK
mode.
iPod and iPhone operation
The operations described above depend on the generation iPod
and iPhone you are using.
Release the
button to
resume
playback.
TV OUT
Press for more
than 2 seconds
to toggle the
video out
(TV OUT)
DISP
ALARM
display
DISPLAY
between iPod
or iPhone and
TV.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
DK-CL5P
Listening to USB mass storage device/SD Card
DK-CL5P
MUSIC SYSTEM FOR iPod
&
iPhone
Note:
This product is not compatible with MTP and AAC file systems
from USB mass storage device or MP3 player.
VOLUME
TUNING
■
1
To playback USB/SD Card
Press the FUNCTION button repeatedly on main unit to select
USB or SD function. Connect the USB memory device or SD
card that has MP3 format files on the unit. When the USB
memory or SD card is connected to the main unit, playback
will start at first track of first supported folder.
FUNCTION
CLOCK
/
MEMORY
PRESET TRACK
ALARM
DIMMER
ON / STAND-BY
ALARM RESET
2
3
Press the FOLDER
playback folder.
Select desired file to be played back by pressing the
button. Playback will start at desired file.
(
or
) button to select desired
MEMORY CLOCK
FUNCTION
ON / STAND-BY
or
ALARM RESET
Press DISPLAY button to display track number and folder
number.
FUNCTION
Note:
To pause playback:
Press the
/
button.
Auto power off function:
In the stop mode of USB operation, the main unit enters the
stand-by mode after 15 minute of inactivity.
■
To remove USB memory device
1
2
Press the FUNCTION button to change to other function.
Disconnect USB memory device from the USB terminal.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
DK-CL5P
Listening to USB mass storage
device/SD Card (continued)
Listening to the radio
DK-CL5P
MUSIC SYSTEM FOR iPod
&
iPhone
■
To remove SD card
1
2
Press the FUNCTION button to change to other function.
Disconnect SD card from the SD card slot.
VOLUME
TUNING
Notes:
FUNCTION
CLOCK
/
MEMORY
PRESET TRACK
ALARM
DIMMER
ON / STAND-BY
● SHARP will not be held liable for the loss of data whilst the
USB memory device is connected to the audio system.
● Files compressed in MP3 format only can be played back
when connected to the USB or SD card terminal.
● This USB memory’s or SD card format supports FAT 16 or
FAT 32.
ALARM RESET
DISPLAY
TUNING
FUNCTION
ON / STAND-BY
● SHARP cannot guarantee that all USB memory devices will
work on this audio system.
ALARM RESET
● USB cable is not recommended for use in this audio system
to connect to USB memory device. Use of the USB cable will
affect the performance of this audio system.
● This USB memory cannot be operated via USB hub.
● The USB terminal in this unit is not intended for a PC
connection but is used for music streaming with a USB
memory device.
FUNCTION
● External HDD-storage cannot be played back via USB
terminal.
● If the data inside the USB memory or SD card is large, it may
take longer time for the data to be read.
● The display will show “no” when not supported device is plug-
in.
■
Tuning
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button repeatedly to select the
Tuner function.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
DK-CL5P
Listening to the radio (continued)
1
2
Perform steps 1 - 3 in “Tuning” on pages 20 - 21.
3 Tune to the desired station.
Press the CLOCK/MEMORY button for more than 2
seconds on the main unit or remote control to enter
the preset tuning saving mode.
Main Unit
Manual tuning:
Rotate the TUNING (s or r) knob clockwise or counter
clockwise to tune into the desired station.
Remote Control
Manual tuning:
Press the TUNING (s or r) button as many times as
required to tune in to the desired station.
MON
3
4
Within 7 seconds, press the
or
button on the
Auto tuning (remote control only):
main unit or s or r button on the remote control to
When the TUNING (s or r) button is pressed for more
than 0.5 seconds, scanning will start automatically and the
tuner will stop at the first receivable broadcast station.
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
Notes:
●
When radio interference occurs, auto scan tuning may stop
automatically at that point.
Within 7 seconds, press the CLOCK/MEMORY button
to store that station in memory.
●
●
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING (s or r) button again.
Receiving an FM stereo transmission:
● If the FM reception is weak, the reception will auto changes to
monaural, and the sound becomes clearer.
MON
MON
If the preset number indicators disappear before the
station is programmed, repeat the operation from step 2.
■
Programming a station
You can store 20 FM stations in memory and recall them at the
push of a button. (Preset tuning)
5
Repeat steps 1 - 4 to set other stations, or to change a
preset station.
When a new station is stored in memory, the station
previously programmed for that preset channel number will
be erased.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
DK-CL5P
Listening to the radio (continued)
Alarm and sleep operation
■
Alarm
Note:
The unit turns on and play desired source (iPod, iPhone or
The batteries system protects the programmed stations should
TUNER) or Buzzer sound for 1 hour alarm cycle.
there be
a
power failure or the AC/DC adaptor becomes
disconnected. If the backup batteries are drain off, the
programmed stations will be erased.
Before setting the alarm:
1 Check that the clock is set to the correct time. (refer page 15)
If it is not set, you cannot use the alarm function.
■
To recall a programmed station
Press PRESET/TRACK
repeatedly or PRESET/FOLDER
repeadtedly to select the desired programmed station.
(
or
)
button on main unit
2 For iPod or iPhone playback: Insert iPod or iPhone to the
unit. (refer page 17)
(s
or
r)
on remote control
3 For TUNER: Set preset memory. (refer page 21)
Setting the alarms
In this example, the setting is for ALARM 1. The same method
is used to set for ALARM 2.
1
In standby mode, press and hold the ALARM 1 button
until the alarm time blinking.
2
Press the (
press the ALARM 1 button.
or
) button to adjust the hour and
PM
Press the (
or
) button once to advance the time by 1
hour. Hold it down to advance continuously. “AM” or “PM”
indicator will interchange after each 12 hour cyclic.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
DK-CL5P
Note:
If wake up source is set to iPod, and iPod is not present, the
alarm source will change to default Buzzer.
3 Press the (
or
) button to adjust the minutes and
then press the ALARM 1 button.
■
Activate and deactivate the alarm
PM
1
Press ALARM 1 or ALARM 2 button once to deactivate
current alarm times and wake up source.
2
3
Press ALARM 1 or ALARM 2 button again to activate
the alarm function. When the alarm setting time is
activated, alarm icon ( or ) will appear on display.
Press the (
or
) button once to advance the time by 1
minute. Hold it down to change the time in 5 minutes
interval.
When alarm has started, alarm icon ( or ) will
blinking on the display.
4 Press the (
or
) button to select the day for alarm
and then press the ALARM 1 button.
Daily Alarm:
Weekday : MON - FRI (alarm activate from Monday to
Friday only)
Weekend : SAT - SUN (alarm activate from Saturday to
Sunday only)
Everyday : MON - SUN (alarm activate daily)
● During alarm function, press ALARM RESET button to stop
alarm and it will come again on the next day.
FUNCTION
ON / STAND-BY
ALARM RESET
5 Press the (
or
) button to select the wake up
source and then press the ALARM 1 button.
■
Snooze function
Once alarm has started, pressing the SNOOZE/DIMMER button
will stop alarm for 9 minutes.
PM
PM
Once the snooze time has expired, alarm will continue.
The snooze function can be operated during 1 hour alarm cycle.
Wake up source:
iPod BUZZER
RADIO
Alarm icon “ ” will light up to indicate alarm setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
DK-CL5P
Alarm and sleep operation (continued)
■
Sleep operation
■
To use alarm and sleep operation together
The unit can be turned off automatically.
Sleep and alarm:
For example, you the can fall asleep listening to the radio and
wake up to listening to the iPod in the next morning.
1
2
Playback the desired sound source.
Press the SLEEP button on the remote control
repeatedly to select sleep time.
1
2
Set the sleep time (steps 1 - 3, page 24).
While the sleep timer is set, set the alarm
(steps 1 - 4, pages 22 - 23).
120
90
60
3
Activate the alarm (page 23).
oFF
15
30
Alarm setting
Sleep timer setting
End time
1 hour
Alarm start time
3
After 5 seconds the display
will return to previous mode
and sleep indicator appears.
15 minutes - 2 hours
Sleep operation will
automatically stop
To confirm the remaining sleep time:
1
While “SLEEP” is indicated, press the SLEEP button once
to display “XXX”.
“XXX” is sleep remaining time.
● The remaining sleep time is displayed for about 5 seconds.
● You can change the remaining sleep time while it is displayed
by pressing the SLEEP button (step 2).
To cancel the sleep operation:
Press and hold the ON/STAND-BY button while “SLEEP” is
indicated.
To cancel the sleep operation without setting the unit to the
stand-by mode, proceed as follows.
1
While “SLEEP” is indicated, press the SLEEP button
repeteadly to select “OFF”.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
DK-CL5P
Enhancing your system
The auxiliary cable is not included. Purchase
auxiliary cable as shown below.
a
separate
■
NAP
The main unit will temporarily enters stand-by mode when pressing
NAP button. After nap time, main unit will power on into last function
used.
Portable audio player
1
2
Playback the desired sound source.
Press the NAP button on the remote control repeatedly to
select nap time.
Note:
Selecting
function.
“oFF” during NAP setting will activate the last
Computer
120
oFF
90
05
60
10
30
20
To the line
output jack
3
The unit will go to standby mode and NAP indicator (
appears on the display.
)
FM ANTENNA
VIDEO OUT
AUDIO IN
DC IN 8V
To confirm the remaining nap time:
1
While “ ” is indicated, press the NAP button once to display
“XXX”.
“XXX” is NAP remaining time.
● The remaining NAP time is displayed for about 3 seconds.
● You can change the remaining NAP time while it is displayed
by pressing the NAP button (step 2).
Auxiliary cable
(not supplied)
To cancel the NAP operation:
Press the ON/STAND-BY button while “ ” is indicated.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
DK-CL5P
Enhancing your system
Troubleshooting chart
Many potential problems can be resolved by the owner without
calling a service technician.
If something is wrong with this product, check the following
before calling your authorized SHARP dealer or service center.
(continued)
■
Listening to the audio/video sounds from
portable audio player, computer etc.
■
General
Symptom
1
Use the auxiliary cable to connect the portable audio
player, computer etc. to the AUDIO IN jack.
Possible cause
● The clock is not set to the ● Did a power failure occur?
When using video equipment, connect the audio output to
this unit and the video output to a television.
correct time.
Reset the clock. (Refer to
page 15)
2
3
Press the ON/STAND-BY button to turn the power on.
● When a button is
pressed, the unit does
not respond.
● Set the unit to the power
stand-by mode and then turn
it back on.
Press the FUNCTION button on main unit or remote
control to select Audio In function.
● If the unit still malfunctions,
reset it.
4
Play the connected equipment.
(Refer to page 28)
● No sound is heard.
● Is the volume level set to “0”?
Note:
To prevent noise interference, place the unit away from the
television and do not make any auxiliary playback, while
listening to the iPod or iPhone.
■
Remote control
Symptom
Possible cause
● The remote control does ● Is the AC/DC adaptor of the
not operate.
unit plugged in?
● Is the battery polarity
correct?
● Is the battery dead?
● Is the distance or angle
incorrect?
● Does the remote control
sensor receive strong light?
Download from Www.Somanuals.com. All Manuals Search And Download.
26
DK-CL5P
■
USB/SD
Symptom
■
iPod and iPhone
Symptom
Possible cause
Possible cause
● No sound is produced. ● The iPod or iPhone unit
● Device cannot be
● Is there any MP3 file
available?
No image appears on
the TV/monitor.
software version is not update
to the latest version. Please
visit Apple’s homepage.
detected.
● Is the device properly
connected?
● Is it an MTP device?
● Does the device contain
AAC file only?
● The iPod or iPhone is not
playing.
● The iPod or iPhone is not
properly connected to the unit.
● Playback does not start. ● Is it a false MP3 file?
● Is the AC/DC adaptor of the
unit plugged in?
● The video cable is not properly
■
Tuner
Symptom
● The radio makes unusual ● Is the unit placed near the
connected.
● The TV/monitor’s input
selection is not properly set.
Possible cause
● iPod or iPhone will not ● The iPod or iPhone is not
noises continuously.
TV or computer?
● Is the FM antenna placed
properly? Move the antenna
away from the AC/DC
adaptor if it is located
nearby.
charge.
making full contact with the
connector.
● Is the AC/DC adaptor of the
unit plugged in?
rd
● Using iPod (3 generation).
● The main unit is using
batteries as power supply.
● The iPod or iPhone is not
supported. Refer page 16 for
compatible models.
● “This accessory is not ● The iPhone battery is low.
made to work with
iPhone” or similar
appears on iPhone
screen.
Please charge the iPhone.
● iPhone not properly docked.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
DK-CL5P
Troubleshooting chart (continued)
■
Condensation
■
Before transporting the unit
Sudden temperature changes, storage or operation in an
extremely humid environment may cause condensation inside
the cabinet or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on until normal playback is possible (about 1
hour). Wipe off any condensation on the transmitter with a soft
cloth before operating the unit.
Undock the iPod or iPhone and remove the USB/SD card from
the unit. Then, set the unit to the power standby mode. Carrying
the unit with iPod or iPhone left docked or USB/SD card
unremoved might damage the systems.
Maintenance
■
If problem occurs
When this product is subject during operation to strong external
interference (mechanical shock, excessive static electricity,
abnormal supply voltage due to lightning, etc.) or if it is operated
incorrectly, it may malfunction.
■
Cleaning the unit
Periodically wipe the unit with a clean soft cloth.
Caution:
If such a problem occurs, do the following:
1
● Do not use chemicals for cleaning (gasoline, paint thinner,
etc.). It may damage the unit finishing.
● Do not apply oil to the inside of the unit. It may cause
malfunctions.
Set the unit to the stand-by mode and turn the power on
again.
2
If the unit is not restored in the previous operation, unplug
and plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, remove the backup
batteries.
■
Clearing all the memory (reset)
During standby mode, press and hold SNOOZE/DIMMER
button for 5 seconds. Display will become blank for a while and
main unit will reset.
Caution:
This operation will erase all data stored in memory including
clock, alarm settings and tuner preset.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
DK-CL5P
Specifications
As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification changes for
product improvement without prior notice. The performance
specification figures indicated are nominal values of production
units. There may be some deviations from these values in
individual units.
Dimensions
Width: 11-1/8" (282 mm)
Height: 4-7/16" (113 mm)
Depth: 5-29/32" (150 mm)
Weight
2.29 lbs. (1.04 kg)
■
USB/SD Card
■
General
USB host interface ● Complies with USB 1.1 (Full Speed)/
2.0 Mass Storage Class.
Power source
DC IN 8V
2350mA: AC/DC adaptor
(AC 100 - 240 V ~ 50/60 Hz)
● Support Bulk only and CBI protocol.
9V
(
UM-2/SUM-2, R14/CC)
x
6
Clock Backup: 3V
AA) x 2
(UM-3/SUM-3, R6/
Support file
Bitrate support
Other
● MPEG 1 Layer 3
● MP3 (32 ~ 320 kbps)
Power
consumption
14 W
● Maximum total number of MP3 files is
999.
● Maximum total number of folders is
255 INCLUSIVE of root directory.
Output power
Front speakers:
2 watts minimum RMS per channel into
8 ohms from 100 Hz to 20 kHz, 10% total
harmonic distortion.
File system
support
● Support USB devices with Microsoft
Windows/DOS/FAT 12/FAT 16/ FAT
32.
Speaker
1-way type speaker system
2.5" (6.5 cm) Full Range
● 2 kbyte block length for sector.
■
Tuner
Speaker maximum 4 W/Channel
input power
Frequency range
FM: 87.5 - 108.0 MHz
Speaker rated
input power
2 W/Channel
Output terminals
Video output: 1Vp-p
Input terminals
Auxiliary (audio signal):
500 mV/47 k ohms
Download from Www.Somanuals.com. All Manuals Search And Download.
29
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when ship in its original container,
will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a
new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of which has
been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in
design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED WARRANTIES INCLUDING
.
THE WARRANTIES OF MERCHANTABILITYAND FITNESS FOR USEARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any
warranties beyond the time period described herein on behalf of Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser.
Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the
purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event
shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone
other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some states
do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
Model Specific Section
DK-CL5P MUSIC SYSTEM FOR iPod & iPhone
Your Product Model Number & Description:
(Be sure to have this information available when you need service for your Product.)
Warranty Period for this Product:
One (1) year parts and labor from the date of purchase.
Additional Item(s) Excluded from Warranty Coverage (if any): Non-functional accessories, supplies, and consumable items.
Where to Obtain Service:
At a Sharp Authorized Servicer located in the United States.
To find a location of the nearest SharpAuthorized Servicer, call Sharp toll free at 1-800-BE-SHARP.
What to do to Obtain Service:
Ship your Product prepaid to a Sharp Authorized Servicer.
Be sure to have Proof of Purchase available. If you ship the Product, be sure it is insured and
packaged securely.
TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP.
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07495 - 1163
Printed in China
92L87500034101
10K R KI 1
Download from Www.Somanuals.com. All Manuals Search And Download.
|