Sharp Flat Panel Television XL 3000V User Manual

XL-3000V

SERVICE MANUAL

No. S8149XL3000V/

VIDEO CD COMPACT AUDIO SYSTEM

MODEL XL-3000V

XL-3000V Video CD Compact Audio System consisting of XL-

3000V (main unit) and CP-XL3000U (speaker system).

• In the interests of user-safety the set should be restored to its original

condition and only parts identical to those specified should be used.

NTSC/PAL

CONTENTS

Page

SAFETY PRECAUTION FOR SERVICE MANUAL .......................................................................................................... 2

VOLTAGE SELECTION.................................................................................................................................................... 2

AC POWER CORD AND PLUG ADAPTOR ..................................................................................................................... 2

SPECIFICATIONS ............................................................................................................................................................ 3

NAMES OF PARTS .......................................................................................................................................................... 4

OPERATION MANUAL ..................................................................................................................................................... 6

DISASSEMBLY............................................................................................................................................................... 10

REMOVING AND REINSTALLING THE MAIN PARTS.................................................................................................. 12

ADJUSTMENT ................................................................................................................................................................ 13

TEST MODE ................................................................................................................................................................... 16

NOTES ON SCHEMATIC DIAGRAM ............................................................................................................................. 19

TYPES OF TRANSISTOR AND LED.............................................................................................................................. 19

BLOCK DIAGRAM .......................................................................................................................................................... 20

SCHEMATIC DIAGRAM ................................................................................................................................................. 26

WIRING SIDE OF P.W.BOARD ...................................................................................................................................... 36

WAVEFORMS OF CD CIRCUIT ..................................................................................................................................... 41

TROUBLESHOOTING .................................................................................................................................................... 42

FUNCTION TABLE OF IC .............................................................................................................................................. 48

LCD DISPLAY ................................................................................................................................................................. 62

PARTS GUIDE/EXPLODED VIEW

This document has been published to be used

for after sales service only.

The contents are subject to change without notice.

SHARP CORPORATION

Download from Www.Somanuals.com. All Manuals Search And Download.

– 1 –

XL-3000V

FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER

TO THE OPERATION MANUAL.

SPECIFICATIONS

■ General

■ CD player

Power source

AC 110/127/220/230 - 240 V, 50/60 Hz

56 W

Type

Compact disc player

Power

consumption

Signal readout

Non-contact, 3-beam semiconductor laser

pickup

Dimensions

Width: 230 mm (9-1/16")

Height: 128 mm (5-1/16")

Depth: 293 mm (11-9/16")

D/A converter

1-bit D/A converter

20 - 20,000 Hz

Frequency

response

Weight

3.3 kg (7.3 lbs.)

Dynamic range

90 dB (1 kHz)

■ Amplifier

■ Tuner

Output power

MPO: 60 W (30 W + 30 W) (10 % T.H.D.)

RMS: 40 W (20 W + 20 W) (10 % T.H.D.)

Speakers: 6 ohms

Frequency range

FM: 88 - 108 MHz

AM: 531 - 1,602 kHz

Output terminals

Headphones: 16 - 50 ohms (recommended:

32 ohms)

■ Speaker

CD digital output (optical)

Type

2-way type speaker system

5 cm (2") Tweeter

10 cm (4") Woofer

40 W

Video out: 1 Vp-p (75 ohms)

Input terminals

Video/Auxiliary (audio signal): 500 mV/47

kohms

Maximum input

power

■ Video CD

Rated input power 20 W

Video output

format

PAL/NTSC

Impedance

Dimensions

6 ohms

Width: 140 mm (5-9/16")

Height: 288 mm (11-3/8")

Depth: 187 mm (7-3/8")

Weight

2.3 kg (5.1 lbs.)/each

Specifications for this model are subject to change without

prior notice.

Download from Www.Somanuals.com. All Manuals Search And Download.

– 3 –

XL-3000V

NAMES OF PARTS

■ Front panel

1. Disc Compartment

2. Volume Up and Down Buttons

3. On/Stand-by Button

4. Function Selector Button

5. Memory/Set Button

6. Bass/Treble Selector Button

7. Video CD/CD Play or Pause,

Tuning Up Button

8. Video CD Stop or Return, CD Stop,

Tuning Down Button

9. Video CD Skip or Previous, CD Track Down,

Tuner Preset Down Button

10. Disc Compartment Cover Open/Close Button

11. Video CD Skip or Next, CD Track Up,

Tuner Preset Up Button

■ Display

1. Timer Play Indicator

2. Sleep Indicator

3. Video CD/CD Random Play Indicator

4. Memory Indicator

5. FM Stereo Mode Indicator

6. Video CD/CD Play Indicator

7. Video CD/CD Repeat Play Indicator

8. FM Stereo Receiving Indicator

9. Surround Indicator

■ Rear panel

1. CD Digital Output Socket

2. AM Aerial Terminal

3. Aerial Earth Terminal

4. FM 75 Ohms Aerial Socket

5. Headphone Socket

6. Video Output Socket

7. Cooling Fan

8. Video/Auxiliary (Audio Signal) Input Sockets

9. AC Voltage Selector

10. AC Power Input Socket

11. Speaker Terminals

The rating label is located

on the bottom of the unit.

■ Speaker system

1. Tweeter

2. Woofer

3. Bass Reflex Duct

4. Speaker Terminals

Download from Www.Somanuals.com. All Manuals Search And Download.

– 4 –

XL-3000V

■ Remote control

1. Remote Control Transmitter

2. On/Stand-by Button

3. Video CD/CD Button

4. Tuner Button

5. Timer Button

6. Clock Button

7. Memory Button

8. Dimmer Button

9. Surround Button

10. Volume Up and Down Buttons

11. Video/Auxiliary Button

12. Video CD TV Type Button

13. Band Selector Button

14. Video CD/CD Clear Button

15. Sleep Button

16. Random/Repeat Button

17. Disc Compartment Cover Open/Close Button

18. Audio Mode Button

19. Tuner Preset Up Button

20. Video CD Skip or Previous, CD Track Down Button

21. Video CD/CD Fast Reverse, Tuning Down Button

22. Video CD/CD Play Button

23. Video CD Skip or Next, CD Track Up Button

24. Video CD/CD Fast Forward, Tuning Up Button

25. Video CD/CD Pause Button

26 27

26. Video CD Stop or Return, CD Stop Button

27. Tuner Preset Down Button

28. Bass Up and Down Buttons

29. Video CD/CD Direct Search Buttons

30. Video CD Intro Button

31. Video CD Track Digest Button

32. Treble Up and Down Buttons

33. Video CD Playback Control Auto/Off Button

34. Video CD/CD Display Button

35. Video CD Time Search Button

Buttons with " " mark in the illustration can be operated on the re-

mote control only.

Other buttons can be operated both on the main unit and the re-

mote control.

Download from Www.Somanuals.com. All Manuals Search And Download.

– 5 –

XL-3000V

OPERATION MANUAL

Setting the Clock

Within 1 minute, press the PRESET ( or ) button to

adjust the hour and then press the MEMORY button.

When the 12-hour display is selected, "AM" will change auto-

matically to "PM".

Within 1 minute, press the PRESET ( or ) button to

adjust the minutes and then press the MEMORY button.

This may be operated only with the remote control.

In this example, the clock is set for the 24-hour (0:00) display.

Press the CLOCK button and within 3 seconds, press

the MEMORY button.

● The hour will not advance even if minutes advance from "59"

to "00".

● The clock starts from "0" second. (Seconds are not dis-

played.)

Within 1 minute, press the PRESET ( or ) button to

select 24-hour or 12-hour display and then press the

MEMORY button.

To confirm the time display when the power is on:

Press the CLOCK button.

The time display will appear for about 5 seconds.

Note:

The time will flash at the push of the CLOCK button when the AC

power supply is restored after a power failure or unplugging the unit.

Readjust the clock as follows.

"0:00"

The 24-hour display will appear.

(0:00 - 23:59)

To readjust the clock:

Perform "Setting the Clock" from the beginning.

"AM 12:00"

The 12-hour display will appear.

(AM 12:00 - PM 11:59)

To change the 24-hour or 12-hour display:

Note that this can only be set when the unit is first installed or it

has been reset.

Clear all the programmed contents.

Perform "Setting the Clock" from the beginning.

Troubleshooting

Remote Control

■ If trouble occurs

■ Battery installation

When this product is subjected to strong external interference

(mechanical shock, excessive static electricity, abnormal supply

voltage due to lightning, etc.) or if it is operated incorrectly, it may

malfunction.

Remove the battery cover.

Insert the batteries according to the direction indicated in

the battery compartment.

When inserting or removing the batteries, push them towards the

battery terminals.

If such a problem occurs, do the following:

Replace the cover.

Set the unit to the stand-by mode and turn the power on again.

If the unit is not restored in the previous operation, unplug and

plug in the unit, and then turn the power on.

Note:

If neither operation above restores the unit, clear all the memory by

resetting it.

Precautions for battery use:

● Replace all old batteries with new ones at the same time.

● Do not mix old and new batteries.

● Remove the batteries if the unit will not be used for long periods

of time. This will prevent potential damage due to battery leak-

age.

■ Clearing all the memory (reset)

Press the ON/STAND-BY button to enter the power stand-by

mode.

Unplug the AC power lead from the AC INPUT socket on the

unit.

Whilst pressing down the MEMORY/SET button and the

but-

ton, plug the AC power lead into the AC INPUT socket on the

unit.

Caution:

● Do not use rechargeable batteries (nickel-cadmium battery, etc.).

● Installing the batteries incorrectly may cause the unit to malfunc-

tion.

Notes concerning use:

● Replace the batteries if the operating distance is reduced or if the

operation becomes erratic. Purchase 2 "AAA" size batteries (UM-

4, R03, HP-16 or similar).

AC INPUT

● Periodically clean the transmitter on the remote control and the

sensor on the unit with a soft cloth.

● Exposing the sensor on the unit to strong light may interfere with

operation. Change the lighting or the direction of the unit.

● Keep the remote control away from moisture, heat, shock, and

vibrations.

Caution:

● This operation will erase all data stored in memory including

clock, timer settings, tuner preset, and CD programme.

● After the above operation, interval span setting for AM will be

returned to 9 kHz (50 kHz for FM) automatically.

Download from Www.Somanuals.com. All Manuals Search And Download.

– 6 –

XL-3000V

System Connections

FM aerial

AM loop aerial

Right speaker

MD recorder

Left speaker

not supplied

Right speaker

Left speaker

To a wall socket

Black wire

with white dots

Black wire

System Connections (continued)

■ Placing the speaker system

There is no distinction between the right and the left speakers.

■ TV/monitor connection

If the TV/monitor has a video input, connect it to VIDEO OUT socket

on the rear of the unit.

Left speaker

Right speaker

To video

input socket

Speaker grilles are removable:

Make sure nothing comes into contact

with the speaker diaphragms when you

remove the speaker grilles.

Video cable

Notes:

● The speakers are magnetically shielded.

Therefore, they do not affect the display even you use them near

the TV. However, some colour variation may occur, depending on

the type of TV used.

If colour variation occurs...

Turn off the TV (from the power switch).

After 15 - 30 minutes, turn the TV on again.

Note:

If the TV/monitor does not have a video input, the VIDEO OUT

socket on the unit should be connected to a VCR with a video input,

which in turn should be connected to the TV/monitor through the TV

ANTENNA/CABLE input. (Be sure to turn on the VCR, and set the

VCR's input mode to "auxiliary".)

If the colour variation is still present...

Move the speakers further away from the TV.

● If any kind of magnet or an electromagnet is placed too close to

the TV and the system, irregular colours may appear on the TV

screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

– 7 –

XL-3000V

System Connections (continued)

■ Setting the AC voltage selector

■ Connecting the AC power lead

After checking all the connections have been made correctly,

connect the AC power lead to the AC power input socket, then

into the wall socket.

Check the setting of the AC voltage selector located on the rear

panel before plugging the unit into a wall socket. If necessary, adjust

the selector to correspond to the AC power voltage used in your

area.

Wall socket

Turn the selector with a screwdriver until the appropriate volt-

age number appears in the window (110 V, 127 V, 220 V or 230 V

- 240 V AC).

Notes:

● Unplug the AC power lead from the wall socket if the unit will not

be in use for a prolonged period of time.

● Never use a power lead other than the one supplied. Use of a

power lead other than the one supplied may cause an elec-

tric shock or fire.

AC Plug Adaptor

In areas (or countries) where a wall socket as shown in illustration

is used, connect the unit using the AC plug adaptor supplied with

the unit, as illustrated. The AC plug adaptor is not included in areas

where the wall socket and AC power plug can be directly connected

(see illustration ).

System Connections (continued)

To check the tuning span currently selected:

■ Setting the AM/FM interval

Press the ON/STAND-BY button to turn the power on.

The International Telecommunication Union (ITU) has established

that member countries should maintain either a 10 kHz or 9 kHz

interval between broadcasting frequencies of AM stations and 100

kHz or 50 kHz for FM stations. The illustration shows the 50/9 kHz

zones (regions 1 and 3), and the 100/10 kHz zone (region 2).

Press the FUNCTION button until "AM" appears on the display.

● If "AM 531 kHz" is displayed, it means that AM stations have

been adjusted for a 9 kHz span and FM stations for 50 kHz

span. If "AM 530 kHz" is displayed, AM stations have been ad-

justed for a 10 kHz span and FM stations for 100 kHz span.

This product is not equipped with a span selector. However, it will be

adjusted to a 9 kHz AM (50 kHz FM) interval when shipped from the

factory.

Before using the unit, be sure to set it to the AM/FM tuning interval

(span) used in your area.

To change from a 9 kHz AM (50 kHz FM) interval to a 10 kHz AM

(100 kHz FM) interval:

Press the ON/STAND-BY button to enter the stand-by mode.

Hold down the button and the MEMORY/SET button for at

least 4 seconds. Release the buttons when "AM SP 10 kHz" and

"FM SP 100 kHz" are displayed alternately.

● The clock display will reappear.

To return to a 9 kHz AM (50 kHz FM) interval:

Press the ON/STAND-BY button to enter the stand-by mode.

Hold down the button and the MEMORY/SET button for at

least 4 seconds. Release the buttons when "AM SP 9 kHz" and

"FM SP 50 kHz" are displayed alternately.

● The clock display will reappear.

Caution:

● When the unit is left for a few hours after the span has been

switched and the AC power lead disconnected, the AM span will

be automatically returned to 9 kHz (FM span to 50 kHz). If this

happens, set the span again.

● When the span is switched, all the memorised stations will be

cancelled.

Download from Www.Somanuals.com. All Manuals Search And Download.

– 8 –

XL-3000V

Listening to a CD

Press the ON/STAND-BY button to turn the power on.

Press the FUNCTION button until "CD" or "NO DISC"

appears on the display.

When operating with the remote control, press the CD button.

Press the

compartment.

(OPEN/CLOSE) button to open the disc

Place a CD on the spindle, label side up.

Be sure to place 8 cm (3") disc in the middle of a disc holder.

Press the

(OPEN/

CLOSE) button to

close the disc com-

partment.

Total number of

tracks

Total playing time

Press the

(

) button to start playback from track 1.

When the last track on the disc has finished playing, the unit will

stop automatically.

To interrupt playback:

Main unit operation:

Press the

button.

To resume playback from the same point, press the

Remote control operation:

button again.

Press the button.

To resume playback from the same point, press the button.

To stop playback:

Press the button.

To remove the CD:

Whilst in the stop mode, press the (OPEN/CLOSE) button.

Press the disc eject button and remove the CD.

Listening to the Radio

Press the ON/STAND-BY button to turn the power on.

Press the FUNCTION button until "FM" or "AM" ap-

pears on the display.

When operating with the remote control, press the TUNER but-

ton, and then the BAND button to select "FM" or "AM".

Press the TUNING ( or ) button to tune in to the de-

sired station.

Manual tuning:

Press the TUNING button as many times as required to tune in

to the desired station.

Auto tuning:

When the TUNING button is pressed for more than 0.5 sec-

onds, scanning will start automatically and the tuner will stop at

the first receivable broadcast station.

Notes:

● This can be operated by pressing the TUN. ( or ) button

on the remote control.

● When radio interference occurs, auto scan tuning may stop

automatically at that point.

● Auto scan tuning will skip weak signal stations.

● To stop the auto tuning, press the TUNING button again.

To receive an FM stereo transmission:

Press the FUNCTION (BAND) button to display the "ST" indicator.

● " " will appear when an FM broadcast is in stereo.

● If the FM reception is weak, press the FUNCTION (BAND) button

to extinguish the "ST" indicator. The reception changes to mon-

aural, and the sound becomes clearer.

FM stereo mode indicator

FM stereo receiving indicator

After use:

Press the ON/STAND-BY button to enter the power stand-by mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

– 9 –

XL-3000V

DISASSEMBLY

STEP

REMOVAL

PROCEDURE

FIGURE

Caution on Disassembly

Follow the below-mentioned notes when disassembling

the unit and reassembling it, to keep it safe and ensure

excellent performance:

Rear Panel/

Terminal PWB/

Fan Motor

1. Screw .................. (A1) x7

2. Socket ................. (A2) x4

3. Screw .................. (A3) x4

4. Screw .................. (A4) x2

10-1

10-1,2

10-1

1. Take compact disc out of the unit.

Top Cabinet/

Video PWB

1. Screw .................. (B1) x2

2. Hook .................... (B2) x5

3. Flat Cable ............ (B3) x2

4. Socket ................. (B4) x9

5. Screw .................. (B5) x3

6. Socket ................. (B6) x1

10-2

2. Be sure to remove the power supply plug from the wall

outlet before starting to disassemble the unit.

3. Take off nylon bands or wire holders where they need to

beremovedwhendisassemblingtheunit. Afterservicing

the unit, be sure to rearrange the leads where they were

before disassembling.

11-1

10-2

Tuner PWB

Power PWB

Main PWB

1. Screw .................. (C1) x2

2. Socket ................. (C2) x1

11-1

11-2

4. Take sufficient care on static electricity of integrated

circuits and other circuits when servicing.

1. Socket ................. (D1) x2

2. Hook .................... (D2) x1

1. Socket ................. (E1) x1

2. Screw .................. (E2) x8

(A1) x2

Top Cabinet

ø3 x10mm

Display PWB

1. Screw .................. (F1) x4

2. Hook .................... (F2) x4

CD Mechanism

Gear Box

1. Screw .................. (G1) x4

11-2

Fan Motor

1. Screw .................. (H1) x1

2. Holder.................. (H2) x1

3. Lever ................... (H3) x1

4. Screw .................. (H4) x3

5. Lever ................... (H5) x1

Rear Panel

(A3) x3

ø3 x12mm

(A4) x2

ø3 x8mm

LED PWB

1. Screw .................. (J1) x1

11-2

(A1) x3

ø3 x10mm

Note:

After removing the connector for the optical pickup from the

connector, wrap the conductive aluminium foil around the

front end of connector remove to protect the optical pickup

from electrostatic damage.

Rear Panel

Terminal PWB

(A2) x4

(A1) x2

ø3 x10mm

Figure 10-1

Top Cabinet

HooK

(B2) x2

(B4) x1

CD Mechanism

Hook

(B2) x3

Top Cabinet

(B4) x4

(B6) x1

(B4) x2

(B3) x1

Slide

Hook

Bottom Cabinet

(A3) x1

ø3 x10mm

Lug

Power

PWB

Bottom Cabinet

(B4) x1

Video PWB

(B3) x1

(B1) x2

ø2.5 x8mm

Main PWB

(B4) x1

Figure 10-2

Download from Www.Somanuals.com. All Manuals Search And Download.

– 10 –

XL-3000V

Power PWB

Tuner PWB

(D1) x2

(C1) x1

ø3 x8mm

Holder

PWB

(E2) x7

ø3 x8mm

(E1) x1

(C2) x1

Tuner PWB

(B5) x3

ø3 x6mm

Video

PWB

Main PWB

Bracket

Bottom Cabinet

(C1) x1

ø3 x6mm

Washer

Hook

(D2) x1

Bracket

Main PWB

(E2) x1

ø3 x14mm

Figure 11-1

(H4) x2

Gear Box

REMOVAL

Speaker

PROCEDURE

FIGURE

STEP

ø2.5 x10mm

(H3) x1

(H1) x1

ø3 x8mm

1. Net Frame ........... (A1) x1

2. Front Panel ......... (A2) x1

3. Screw .................. (A3) x6

11-3

(H5) x1

Switch

PWB

(H4) x1

ø2.5 x8mm

(G1) x2

Tweeter

ø2.5 x10mm

Holder PWB

Bracket

Shield

Cover

(H2) x1

(J1) x1

(G1) x2

ø2.5 x10mm

Front Panel

( A2 ) x1

( A3 ) x2

ø4 x12mm

ø2.5 x10mm

Holder PWB

Net Frame

( A1 ) x1

(F1) x4

ø2.5 x10mm

LED PWB

( A3 ) x4

ø4 x12mm

Woofer

Hook

(F2) x4

CD Mechanism

Screwdriver

Top Cabinet

Display PWB

Figure 11-2

Figure 11-3

Download from Www.Somanuals.com. All Manuals Search And Download.

– 11 –

XL-3000V

REMOVING AND REINSTALLING THE MAIN PARTS

How to remove the CD lid (See Fig. 12-1.)

Perform steps 1,2 and 8 of the disassembly method to remove

the gear box. (See page 10,11)

1. Remove the switch PWB.

2. Remove the screws (A1) x 4 pcs., to remove the gear box

lid.

3. Remove the gears (A2) x 1 pc. and (A3) x 1 pc.

4. Remove the screws (A4) x 2 pcs., to remove the motor.

Caution:

Be careful so that the gear is not damaged.

(The damage gear emits noise during searching.)

CD Lid Motor

(A2) x1

(A1) x1

ø2.5 x14mm

(A1) x2

ø2.5 x12mm

(A4) x2

ø2 x5mm

Switch PWB

(A3) x1

Gear Box Lid

(A1) x1

ø2.5 x10mm

Figure 12-1

CD MECHANISM SECTION (See Fig. 12-2.)

Perform steps 1,2 and 7 of the disassembly method to remove

the CD mechanism. (See page 10,11)

1. Remove the mechanism cover, paying attention to the

pawls (A1) x 4 pcs.

(A1) x4

Mechanism Cover

(A2) x2

ø2.6 x6mm

2. Remove the screws (A2) x 2 pcs., to remove the shaft (A3)

x 1 pc.

3. Remove the stop washer (A4) x 1 pc., to remove the gear

(A5) x 1 pc.

4. Remove the pickup.

Note:

CD Mechanism

After removing the connector for the optical pickup from the

connector, wrap the conductive aluminium foil around the

front end of connector remove to protect the optical pickup

from electrostatic damage.

Shaft

(A3) x1

Gear

(A5) x1

Stop Washer

(A4) x1

Pickup unit

Figure 12-2

Download from Www.Somanuals.com. All Manuals Search And Download.

– 12 –

XL-3000V

ADJUSTMENT

TUNER SECTION

fL: Low-range frequency

fH: High-range frequency

• AM IF/RF

• FM Mute Level

Signal generator: 1 kHz, 40 kHz dev., FM modulated

Signal generator: 400 Hz, 30%, AM modulated

Frequency

Display

Adjusting

Parts

Frequency

Setting/

Adjusting

Parts

Instrument

Connection

Display

Instrument

Connection

Frequency

98.00 MHz

(25±1 dBµV)

98.00 MHz

VR351*1

Input: SO301

Output: Speaker

Terminal

AM IF

450 kHz

—

1,602 kHz

531 kHz

T351

AM Band

Coverage

(fL): T306 *2

1.1 ± 0.1 V

*1. Adjust so that an output signal appears.

990 kHz

(fL): T302 *1

Tracking

• Check FM VT

Signal generator: 1 kHz, 40 kHz dev., FM modulated

*1. Input: Antenna, Output: Speaker Terminal

*2. Input: Input is not connected, Output: TP301

Display

Frequency

Check Point

Instrument

Connection

87.5 MHz

108 MHz

87.5 MHz

108 MHz

3.4 V ± 0.1 V

TP301

• FM Detection

Signal generator: 10.7 MHz, FM sweep generator

7.8 V ± 1.0 V

• Setting the Test Mode

Frequency Frequency

Display

Test

Stage

Setting/

Adjusting

Parts

Instrument

Connection

KeepingtheFF/PRESETUPbuttonandMEMORY/SETbutton

pressed, turn on ON/STAND-BY. Then, the frequency is

initially set in the memory as shown in Table. Call it with the

VOLUME UP/DOWN button to use it for adjustment and check

of tuner circuit.

FM IF

10.7 MHz

98.0 MHz

T304(Turn Input: Pin 1 of

the core of IC301

T304 fully

Preset No.

counter-

clockwise.)

87.50 MHz

108.00 MHz

98.00 MHz

90.20 MHz

106.00 MHz

531 kHz

1,602 kHz

990 kHz

612 kHz

1,404 kHz

• FM RF

Signal generator: 1 kHz, 75 kHz dev., FM modulated

Frequency

Setting/

Adjusting

Parts

Instrument

Connection

Frequency

Display

FM Band

Coverage

—

87.50 MHz

(fL): L303 *1

3.4 ± 0.1 V

TUNER PWB-A2

SO301

ANTENNA

TERMINAL

FM RF

98.00 MHz 98.00 MHz

(10~30 db)

L302

OHMS GND

*1. Input: Antenna, Output: TP301

*2. Input: Antenna, Output: Speaker Terminal

TP301

FM ANT.

FM RF

IC301

²⁰IC302

L302

T302

Tracking fL

FM OSC. L303

FM Band

Coverage fL

T304

FM IF

VR351

FM Mute

Level

T306

AM Band

Coverage fL

T351

AM IF

IC303

Figure 13-1 ADJUSTMENT POINTS

Download from Www.Somanuals.com. All Manuals Search And Download.

– 13 –

XL-3000V

CD SECTION

Since this CD system incorporates the following automatic

adjustment function, when the pickup is replaced, it is not

necessary to readjust it.

VIDEO CD SECTION

A-BEX

TEST VIDEO CD

TVD-581

TVD-581A

Model No.

SET

• Measurement of oscillation frequency

Instrument

Connection

Disc

Adjusting

Point

Specified Value

Video Output Terminal

CD Stop TC100V

27.00000 MHz

± 160 Hz

ofR163Vand

ofC183V

Video Input Terminal

• Checking of video output signal

Checking of color bar

Instrument

Connection

Disc

Track 2

Adjusting Point

Figure 14-3 Checking of video output signal

Video output terminal

Chroma Peak Level

100 ± 15 IRE

(59.94Hz/NTSC)

VIDEO PWB-D

100 100

88.5

Color bar signal

waveform

100 IRE

(0.714V)

1 PCLK2X

140 IRE

(1V)

41.5

33.5

IC15V

IC14V

R163V

C183V

2 GND

40 IRE

(0.286V)

Horizontal

sync signal

-13.5

-20

-25 -25

TC100V

X1V

-40

40 IRE

Color Burst

Figure 14-1 ADJUSTMENT POINTS

Figure 14-4

SET

VIideo Output Terminal

75 ohms

GND

Vectorscope

Waveform monitor

or oscilloscope

TV monitor

Figure 14-2 Measurement of oscillation frequency

Figure 14-5

Download from Www.Somanuals.com. All Manuals Search And Download.

– 14 –

XL-3000V

Checking of vector scope waveform

Disc

Checking

Setting

Checking

Item

Track 2

VIDEO OUT

Set the phase of Phase check

color burst signal ± 10°

(B) to 180°-360°

line.

(

Check that the setting is within the illustrated range.)

R-Y

75%

B-Y

75%

-Q

-I

[NTSC]

[PAL]

Figure 15-1

Checking the black-and-white level

Disc

Checking

Checking Item

Output level

100 ± 10 IRE

100% Luminance

Track 16

VIDEO OUT

100IRE

40IRE

Horizontal Interval

reference signal

100% WHITE LEVEL

Figure 15-2

Download from Www.Somanuals.com. All Manuals Search And Download.

– 15 –

XL-3000V

• The TUNER TEST2 mode is obtained with

+ MEMORY + ON/STAND-BY.

TEST MODE

Thetestmodeappliedtothismicrocomputerhasthreemodes,

namelytheordinarytestmodeforadjustmentormeasurement,

the aging test mode, and the self-diagnosis test mode for self-

judgment in case of final product inspection.

Turn off AC in the TEST2 mode to restore the initial state.

1. Turning on the test mode

For obtaining each test mode, press the ON/STAND-BY

button, while keeping pressing the following two buttons in

the ordinary stand-by mode (power off ). In this case, the

main unit buttons are valid. When turning the ON/STAND-

BY on with remote control buttons, test modes are not

obtained.

Turn off POWER to protect the memory of TEST2 mode.

Turn off POWER again to obtain the ordinary operation

while the data is stored in the memory (besides TUNER).

If AC OFF state is maintained in this state for about 1/2 day,

start is executed in the initial state.

[Ordinary test mode]

1. Tuner Test Mode (TEST 2)

.......................REW/PRESET DOWN + CD PLAY

2. Electronic Volume Test Mode (TEST 3)

.......................REW/PRESETDOWN+FF/PRESETUP

3. Timer Test Mode (TEST 4)

• To clear the whole memory, insert the AC cord, pressing

MEMORY + CD PLAY.

.......................FUNCTION + VOLUME UP

4. LCD Test Mode (TEST 5)

.......................FUNCTION + FF/PRESET UP

5. Electric CD Lid Aging Test Mode (TEST 8)

.......................FUNCTION + CD PLAY

3. Presetfrequenciesforvariousdestinations(random

preset memory)

BAND

[Self-diagnosis Test Mode]

FM 87.50 MHz

FM108.00 MHz

FM 98.00 MHz

FM 90.20 MHz

FM106.00 MHz

1. Button input diagnosis test mode (TEST6)

.......................FUNCTION + VOLUME

Processes are different depending on destinations at

initial settings.

STEREO

2. Tuner Test Mode (TEST 2)

1. Outline of tuner (radio) test mode

The tuner test mode is intended to store the adjustment

and measurement frequencies in the preset memory

CH. When adjusting the tuner section in the production

line,adjustingpersonnelarenotrequiredtosetfrequency.

2. Details of tuner test mode

BAND

AM 531 kHz

AM1602 kHz

AM 990 kHz

AM 612 kHz

AM1404 kHz

Press the "REW/PRESET DOWN" and "CD PLAY"

buttons in POWER OFF state and turn on the power by

the use of "ON/STAND-BY" button to preset and store

frequencyforadjustmentandmeasurementofdestination

specified by the AREA terminal in the preset memory

CH. However, Ordinary 1 and Ordinary 2 are stored in

thedestinations(selectedbySPANswitchingoperation)

when the test mode is obtained.

BAND

16-25

FM106.00 MHz

FM 90.20 MHz

FM 98.00 MHz

FM108.00 MHz

FM 87.50 MHz

("FF " + "MEMORY/SET" KEY SPAN CHANGE)

(As for frequencies to be preset and stored for each

destination, refer to item 3.)

The tuner test mode is started from preset No.1.

The operations of test mode are identical with the ordinary

operations of TUNER function. FUNCTION switching is

invalid.

MONO

• The slant line sections of the table store no memory.

It is necessary to discard the content of preset memory

when the tuner test mode is ended; be sure to write "0000"

or "1111" bits in the memory to be checked for judging

memory error at initial setting and to initialize memory.

When the tuner test mode is obtained, the following display

lights for one second.

Download from Www.Somanuals.com. All Manuals Search And Download.

– 16 –

XL-3000V

3. Electronic volume Test Mode (TEST 3)

Whenthistestmodeisobtained, thefollowingdisplaylights

for one second.

5. LCD Test Mode (TEST 5)

When the LCD test mode is obtained, all the LCD segments

are lighted. Then pressing the "PLAY" button switches

display as below.

Lighting of all segments

Lighting of odd segments

Lighting of even segments

In this mode, volume is -14 dB (STEP28), BASS/TREBLE

is set to 0 (0 dB) and SURROUND mode to OFF, and start-

up function to CD, respectively. The button operations in

the test mode are the same as those of ordinary operation

except volume UP/DOWN.

(1) The display is the same as that of ordinary operation

except test mode setting.

(2) Unlike the ordinary state, the volume is controlled with

the volume UP/DOWN button in accordance with the

following three steps.

^Volume-∞ (STEP 0)

Volume-14 dB (STEP 23)

Volume-0 (STEP 30)

(3) BASS/TREBLE and SURROUND are switched when

button is pressed.

4. Timer test Mode (TEST 4)

Whenthistestmodeisobtained, thefollowingdisplaylights

for one second.

Setthecurrenttimeandtimertimeaccordingtothefollowing

procedure to reproduce the timer.

1. Set the current time to 1:00, the timer to ON time 1:05, the

function to CD, and volume to STEP 12, respectively. One

minute is counted as one second, and the timer is

reproduced. The fade-in (when playback is started) is

executed at a rate of one step for 1 sec. After completion

of fade-in, the fade-out is executed at a rate of one step for

1 sec (WAIT 1 sec inserted).

After completion of fade-out, the power is turned off (after

WAIT 1 sec), and the mode is shifted to the standby.

The display during operation is the same as that of ordinary

timer operation.

Download from Www.Somanuals.com. All Manuals Search And Download.

– 17 –

XL-3000V

6. Key input diagnosis Test Mode (TEST 6)

7. Electric CD lid Aging Test Mode (TEST 8) (Only for

model with electric CD lid)

When the test mode is obtained, the following is displayed.

Outline

OPEN/CLOSE operations of electric CD lid are repeated.

The number of repeated times and time period are

monitored. If the lid does not move to the regular position

after the specified time, operation is stopped. When an

error is detected by [CLID_PRO] during CLOSE, operation

is also stopped.

This test mode is intended to check whether all the main

unit buttons can be detected. Accordingly, in this test

mode, it is checked whether the "ON/STAND-BY" button

waspressedafterallthebuttonsshownbelowwerepressed.

If the result is OK, OK is displayed. If any one of keys was

not pressed, an error is displayed. In both cases of OK

termination or error termination, the mode is shifted to the

standby mode if the "ON/STAND-BY" button is pressed

subsequently.

a. POWER ON for function AUX

CD lid position is checked.

CLOSE position: Operation proceeds to the next

process.

Position other than CLOSE

After the lid moves to

CLOSE,operation

proceedstothenextprocess.

b. CD lid operation started

OPEN operation

WAIT 1 second

CLOSE operation

WAIT 1 second

All models using this type of microcomputer are not always

providedwiththesamebuttons. Sincethebuttonsusedare

different depending on models, types of buttons to be used

are determined by whether RDS, SURROUND, and an

electric lid are available at the initial setting by MODEL port.

c. Operations above are repeated.

Specified monitoring time

OPEN operation: 5 seconds

CLOSE operation: 5 seconds

The order of buttons to be pressed is not determined.

Accordingly, it is checked whether all buttons have been

pressed.

d. Display

OPEN>CLOSE is counted as 1. I to 59999 are counted;

if the count is over 59999, display is returned to 0 to

repeat counting.

1. PU-IN buttons: REW/PRESET DOWN + CD STOP

Since this model is provided with SURROUND (HAVE

OR NOT), RDS (HAVE OR NOT), and electric CD lid, the

following 10 buttons are detected as all buttons.

PLAY, BASS/TREBLE, FUNCTION, VOLUME UP/

DOWN, MEMORY/SET, REW, FF, STOP, CD-OPEN/

The OK/NG display of test result is as follows.

Display when the lid does not move to the regular

position after the specified time

(Ex: Defective operation occurring in the middle of

1538.)

Highlight display of stop when an error is detected by

[CLID-PRO]

(Ex: Defective operation occurring in the middle of

1538.)

Download from Www.Somanuals.com. All Manuals Search And Download.

– 18 –

XL-3000V

NOTES ON SCHEMATIC DIAGRAM

• Resistor:

• The indicated voltage in each section is the one measured

by Digital Multimeter between such a section and the chas-

sis with no signal given.

1. In the tuner section,

( ) : AM mode

To differentiate the units of resistors, such symbol as K and

M are used: the symbol K means 1000 ohm and the symbol

M means 1000 kohm and the resistor without any symbol is

ohm-type resistor. Besides, the one with “Fusible” is a fuse

type.

: FM stereo mode

• Capacitor:

2. In the CD section, the CD is stopped.

To indicate the unit of capacitor, a symbol P is used: this

symbol P means micro-micro-farad and the unit of the

capacitor without such a symbol is microfarad. As to

electrolyticcapacitor,theexpression“capacitance/withstand

voltage” is used.

• Parts marked with “

” (

) are important for

maintaining the safety of the set. Be sure to replace these

parts with specified ones for maintaining the safety and

performance of the set.

(CH), (TH), (RH), (UJ): Temperature compensation

(ML): Mylar type

(P.P.): Polypropylene type

• Schematic diagram and Wiring Side of P.W.Board for this

model are subject to change for improvement without prior

notice.

REF. NO

DESCRIPTION

PICKUP IN

POSITION

REF. NO

SW718

SW721

SW722

SW725

SW726

SW727

SW802

DESCRIPTION

VOLUME DOWN

POSITION

ON—OFF

NSW801

SW651

SW709

SW710

SW711

SW712

SW713

ON—OFF

110V

MEMORY/SET

BASS/TREBLE

CD STOP/TUNING DOWN

REW/PRESET DOWN

FUNCTION

VOLTAGE SELECTOR

ON/STAND-BY

ON—OFF

CD LID OPEN/CLOSE

FF/PRESET UP

CD PLAY/PAUSE/TUNING UP

VOLUME UP

CD LID

2SB562 C

2SC535 C

2SK246 GR

2SC1740 SR

2SD1858 R2

KRA102 M

FRONT

VIEW

FRONT

VIEW

FRONT

VIEW

KRC102 M

KRC104 M

KRC107 M

E C B

(S)(G)(D)

B C E

2SD2012 Y

KTA1266 GR

KTA1268 GR

KTC3199 GR

KTC3200 GR

(1) (2) (3)

DB5306X

2 3

SVC348S

KDV147C

Figure 19 TYPES OF TRANSISTOR AND LED

Download from Www.Somanuals.com. All Manuals Search And Download.

– 19 –

XL-3000V

FROM

VIDEO PWB

FROM

DISPLAY PWB

11 10

CNP307

CNP702

LED PWB

Q901

Q908

Q902

Q804

Q805

M_GND

+B4

Q907

SWITCH PWB

SW802

CD LID

OPEN/CLOSE

Q804

Q805

Q802

M_GND

+B8

Q908

SO401

M801

VIDEO

OUT

CD LID

OPEN/CLOSE

MOTOR

R-CH

VIDEO/AUX

INPUT

L-CH

CD_6R2V

M802

FAN

MOTOR

+B5

Q861

+B7

CNP810

NM802

SPINDLE

MOTOR

SP+

SP–

SP+

SL–

–

NM801

SLED

MOTOR

CNP807

–

PU-IN

GND

M_GND

13 12 11 10

NSW801

PICKUP IN

J801

DIGITAL

OUT

CD MOTOR PWB

TERMIN

PWB

IC804

^{21 22 23 24 25 26 27 28}MM1469XH

16 17 18 19

FOCUS/TRACKING/

SPIN/SLED DRIVER

+B2

DOUT

/RST

100 /RST

90 BUS0

91 BUS1

BUS0

BUS1

SEL

BUS2

2VREF

BUS2

BUS3

BUCK

96 BUCK

97 /CCE

TEBC 52

RFGC 51

VREF 50

/CCE

PICKUP UN

FOCUS COIL

PU_IN

LRCK

BCK

TRO

FOO

BCK

IC802

TC9462F

DATA

AOUT

TEZI 47

TEI 46

SERVO/SIGNAL CONTROL

TSIN 45

CNS801

TRACKING COIL

X801

16.93MHz

TEO

TEN

SBAD

FEI

SBAD

FEO

FEN

+B7

2VRO 10

TEB

SEL

LDO

MDI

TN1

TPI

FPI

FNI

VCC

VRO

SWITCHING

Q801

RFRP

RFCT

17 RFRP

RFIS

RFGO

RFGC

AGCI

RFO

RFI

+B7

VDD

AVDD

VDD

XVDD

VDD

VCOREV

PVREV

MON

LPFO 32

GND

RFN

LPFN

+B7

TMAX

PDO

IC801

TA2109F

SERVO PRE AMP.

D_GND

P2VREF

1/2V

15 24 63 71 72 73 74 77 95

81 86

D_GND

A_GND

M_GND

+B7

Figure 20 BLOCK DIAGRAM (1/6)

Download from Www.Somanuals.com. All Manuals Search And Download.

– 20 –

XL-3000V

FROM

DISPLAY PWB

TUNER PWB

10 11 12 13

CNP703

R-CH IN

R-CH OUT

SURROUND

ON/OFF

+B6

A_12V

SURROUND

Q203

Q201

L-CH OUT

L-CH IN

R-CH OUT

AUX

TUN

11 10

13 12

LOGIC

19 20 21

23 24 25 26

16 17 18

27 28

TUN

IC401

AUX

LC75342M

L-CH OUT

+B6 A_12V

FUNCTION/VOLUME

EQUALIZER

MUTE

IC601

L-CH

+B7

STK40202

Q601

Q602

POWER AMP.

R-CH

RMINAL

PWB

10 11

L-CH

R-CH

J601

L-CH R-CH

HEADPHONES

–B

Q103

Q102

Q101

Q104

F651

T3.15A L 250V

+B1

IC682

D651~D654

KIA7805API

VOLTAGE

REGULATOR

–B

F652

T3.15A L 250V

A_GND

F653

T1.6A L 250V

Q904

T651

POWER

TRANSFORMER

(MAIN)

P UNIT

D_GND

CNP651

IC681

D657~D660

Q606

Q610

Q607

KIA7805API

VOLTAGE

OIL

VOLTAGE

REGULATOR

Q681

D_GND

VOLTAGE

REGULATOR

Q608

Q609

P_CONT

Q683

CD_6R2V

CD +B

+B5

RLY601

+B3

D681~D684

M_12V

F654

T.F 2A,250V

Q605

+B4

+B8

Q903

T681

SW651

VOLTAGE

SELECTOR

VOLTAGE

REGULATOR

POWER

TRANSFORMER

(SUB)

SO655

AC INPUT

SOCKET

POWER PWB-B

A_12V

Q603

Q604

+B6

AC 110/127/220/

230~240V, 50/60Hz

AC POWER SUPPLY CORD

AC 110/127/220/

230~240V, 50/60Hz

MAIN PWB

Figure 21 BLOCK DIAGRAM (2/6)

Download from Www.Somanuals.com. All Manuals Search And Download.

– 21 –

XL-3000V

Tracking fL

FM MUTE

LEVEL

T302

GND

456

+5V

VD301

24 23

19 18

75ohms

VR351

T306

+5V

AM Band

Coverage fL

SO301

ANTENNA

TERMINAL

IC301

TA7358AP

BAD PASS

FILTER

FM FRONT END

BF301

AM IF

T351

FM IF

AM IF

CF352

FM IF

Q306

CF303

CF302

FM +B

T304

TP301

+5V

Q302

FM +B

VD303

L302

FM ANT.

L303

FM OSC.

+5V

VD302

FM Band

Coverage fL

FM RF

22 21 20

FM +B

X352

4.5MHz

DISPLAY PWB

LCD701

LCD DISPLAY

100

CLID_DW

CLID_UP

VLC3

VLC2

VLC1

CLID_PRO

VDD

FAN

CD_STB

OSC2

AMP_DEC

OSC1

LIGHT

DIMMER

MOT_DEC

X701

IC701

11 VSS

8MHz

IX0038SJ

X702

SYSTEM MICROCOMPUTER/

FL DRIVER

32.768kHz

SW711~713

SW718

SW721,722

SW725~727

MMOD

VREF–

VREF+

VD_DI

VD_DO

ACK

BUSY

CLID_SW

SW709

SW710

CLID_OUT

17 KEY1

KEY2

D_GND

STB

P_CONT

47 P–CONT

B-LIGHT

USWD_5R6V

37 38

25 26 27 34

46 49 50

43 44 45

RESET

Q701

Q702

Q703

RX701

REMOTE

SENSOR

Q708

LAMP PWB

A_24V

LMP701

Q709

SWITCHING

GND

Q707

Q706

SWITCHING

Figure 22 BLOCK DIAGRAM (3/6)

Download from Www.Somanuals.com. All Manuals Search And Download.

– 22 –

XL-3000V

TUNER PWB

SWITCHING

Q351

X351

456kHz

19 18

15 14

10 11

+5V

AM IF

T351

AM IF

CF352

+5V

FM ST

+5V

ZD351

Q360

VOLTAGE

REGULATOR

22 21 20

17 16 15 14 13 12

+5V

A_12V

D_GND

TUN_L

TUN_R

A_GND

FM +B

CNS307

LCD701

CD DISPLAY

CNW702

CLID_DW

CNS702

CLID_DW 57

CLID_UP

CLID_PRO

CLID_SW

FAN

CLID_PRO

FAN

CD_STB

AMP_DEC

LIGHT

DIMMER

FAN_DEC

LIGHT

DIMMER

MOT_DEC

C701

0038SJ

CROCOMPUTER/

DRIVER

VD_DI

VD_DO

ACK

VD_DI

VD_DO

ACK 30

BUSY 31

BUSY

CLID_OUT

CLID_OUT 35

GND

STB

CNS704

CNW704

B-LIGHT

CNS703

25 26 27 34

43 44 45 46 49 50

STEREO

CD+B

P_MUTE

P_STB

A_24V

D_GND

SURROUND

CNW703A

Figure 23 BLOCK DIAGRAM (4/6)

Download from Www.Somanuals.com. All Manuals Search And Download.

– 23 –

XL-3000V

VPP

A16

A15

A12

VCC

A18

A17

A14

A13

REGULATOR

Q11V

3.3V

A11

A10

13 D0

D6 20

VSS

IC10V

IX0041SJ

ROM 256K x 16

R163V

27M

80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51

100

VSSK 5 0

AUX4 49

VCC

LA12

LA13

AUX3/VD_DI 48

LA14

AUX2/VD_DO

AUX1/DSADATA

AUX0/DSAACK

PCLKQSCN

PCLK2XSCN

DCLK

LA15

LA16

LA17

AUDIO_CLK

AUDIO_DATA

BCLK

IC15V

ES3880F

VIDEO CD DECODER

HSYNC

VSYNC 40

YUV7 39

YUV6 38

DRAS1/DOE

RSD

RBCLK

RWS

YUV5

YUV4

YUV3

YUV2

YUV1

YUV0

VCC3

TDMCLK

TDMDR

TDMFS

DCAS

VSS

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

20 19 18 17 16 15 14 13 12 11 10

21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

IC16V

IX0025SJ

D-RAM 256K x 16

Figure 24 BLOCK DIAGRAM (5/6)

Download from Www.Somanuals.com. All Manuals Search And Download.

– 24 –

XL-3000V

IC11V

NJM4565M

BUFFER AMP.

VDAC

AGNDV

L_CH

AGNDA

R_CH

–

+5V

DGND

+12V

V_AMP

Q12V

CNP804V

BUSY

VD_DI

VD_DO

ACK

STB

DGND

X1V

27MHz

80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51

MIC2

MIC1

HSYNC

DSC_D6

AOL+

VSYNC

DSC_D5

YUV7

YUV6

YUV5

YUV4

VCC

AOL- 47

AOR-

AOR+

VCCA

VREFP

VCM 42

IC14V

ES3883F

VIDEO CD ENCODER

VSSA

AUX15

VSS

YUV3

DSC_D4

AUX14

LA18/AUX13

94 YUV2

RBCK 37

AUX12 36

AUX11 35

AUX10 34

RSD 33

95 DSC_D3

96 YUV1

97 DSC_D2

98 YUV0

99 DSC_D1

VCC 32

VSS

VSS 31

100

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

CNP801V

DGND

/RST

BUS0

BUS1

BUS2

BUS3

BUCK

/CCE

PICK_IN

LRCK

BCK

DATA

Figure 25 BLOCK DIAGRAM (6/6)

Download from Www.Somanuals.com. All Manuals Search And Download.

– 25 –

XL-3000V

P35 12-A,B

CNS802

P33 12-

CNS7

P31 12-E

CNS307

FROM

VIDEO PWB-D

TUNER PWB-A2

TERMINAL PWB-A4

11 10

FROM

MAIN PWB-A1(2/2)

CNP802A

CNP805

L802

0.82µH

C851

100/10

CNP307

J801

DIGITAL OUT

CNS805

P28 1-G

C852

0.0022

C853

0.0047

CFW852

TO CHASSIS

GND

LUG(205)

CNP810

CNP807

M802

FAN

MOTOR

FROM

MAIN PWB-A1(2/2)

CNS807

P28 1-A

SO401

L402

0.82µH

CNW608

VIDEO

OUT

CNP608 CNS608

R-CH R405

27K

R402

C411

CNP607

CNW607

330P

L401

VIDEO/

AUX IN

2.2µH

C412

330P

R406

27K

R401

CNS607

L-CH

C413

0.0047

C414

220P

CFW452

CFW451

CHASSIS

GND

TO CHASSIS

GND

LUG(205)

Q610 19V

CNW601 CNP601

2SD2012 Y

Q607

2SD2012 Y

7.8V

19V

7.8V

CNW602 CNP602

IC682

D654

D653

1N5402M

KIA7805API

VOLTAGE

230~240V

220V

REGULATOR

F651

T3.15A L 250V

127V

110V

D652

1N5402M

7.8V

F652

T3.15A L 250V

CNP801

R125

680(3W)

–B1

–B

F653

T1.6A L 250V

T651

C126

2200/35

D902

1N4004

R126

D657

1N4004

POWER

680(3W)

Q904

KTC3200 GR

D658

1N4004

TRANSFORMER(MAIN)

D901

1N4004

38.9V

24.4V

D659

1N4004

R911

100

D660

1N4004

C902

220/50

C901

220/50

C903

10/50

ZD901

DZ24BSD

7.7V

9.3V

CNP651

20V

D686

1N4004

IC681

R612

820

KIA7805API

VOLTAGE

9.4V

Q609

KRC107 M

D685

1N4004

D689

1N4004

4.8V

REGULATOR

R687

2.7K

9.4V

ZD684

MTZJ16C

2 3

5.7V

C630

4700/25

R613

4.7K

R611

100

Q608

9.2V

KRA102 M

D_GND

0.7V

C629

ZD602

C626

100/25

4.7/25 MTZJ9.1C

R688

R689

RLY601

Q683

C624

0.022

KTC3199 GR

11.7V

20V

0.72V

P_CONT

Q605

2SD2012 Y

R685

10K

R623

22K

12.2V

R686

47K

R619

C625

10/16

CNP653

Q604

2SD2012 Y

CNW653

20V

11.7V

C622

0.022

D602

1N4148

D681

F654

T.F 2A,250V

D682

1N4004

12.3V

20V

R624

22K

Q903

Q603

KTC3200 GR

KTC3199 GR

11.2V

4.9V

D603

1N4148

R628

100

13V

C683

R913

2200/35

C905

100/10

D683

1N4004

D684

1N4004

5.6V

R617

33K

T681

R912

470

POWER

SW651

VOLTAGE

SELECTOR

ZD601

DZ130BSA

TRANSFORMER

(SUB)

POWER PWB-B

C621

100/25

ZD902

DZ5.6BSB

SO655

CNP652

AC INPUT SOCKET

AC 110/127/220/

230~240V, 50/60Hz

P32 1-F

CNS652

AC 110/127/220/

230~240V, 50/60Hz

FROM

DISPLAY PW

AC POWER SUPPLY CORD

• NOTES ON SCHEMATIC DIAGRAM can be found on page 19.

Figure 26 SCHEMATIC DIAGRAM (1/10)

Download from Www.Somanuals.com. All Manuals Search And Download.

– 26 –

XL-3000V

P33 12-F,G

CNS703

FROM

DISPLAY PWB-A3

PWB-A2

MAIN PWB-A1(1/2)

10 11 12 13

CNP703

R202

8.2K

C202

C204

1/50

VIDEO SIGNAL

CD SIGNAL

C212

0.0033

C214

4.7/50

0.0056

R216

12K

R218

C216

1/50

R208

330

12K

FM SIGNAL

Q203

KRC107 M

R207

C208

47K

IC201

100/16

SURROUND

0V G

KIA4558P

SURROUND

CONTROL

R210

10K

4.44V

D201

1N4148

Q201

2SK246 GR

C215

1/50

R217

12K

R215

12K

C209

47/16

C211

0.0033

R201

8.2K

C203

1/50

C408

10/16

C404

10/16

TUN

R416

C402

AUX

R404

1.8K

10/16

C433

220P

IC401

AUX

LC75342M

FUNCTION/

VOLUME

R403

1.8K

C432

220P

EQUALIZER

C401

10/16

C431

220P

R417

TUN

C403

10/16

R439

3.9K

C407

10/16

R423

R424

R425

C430

100/16

D402

1N4004

D401

1N4004

IC601

STK40202

POWER AMP.

L601

3µH

R608

R637

4.7

C615

0.1

10 11

R634

3.3K

C613

R111

L-CH

R-CH

R109

22K

0.1

C114

100/50

Q601

KTC3199 GR

0.6V

C107

100/50

C603

33/16

R110

C614

0.1

R113

100

C111 C112

10/50 10/50

R603

10K

C106

10/50

C616

0.1

R115

56K

R101

–B

C104

0.6V

R638

4.7

39K

R604

10K

C109

CHASSIS

GND

Q602

L602

3µH

KTC3199 GR

.4V

R104

56K

GND

R102

39K

C102

10/50

Q102

KTA1268 GR

R124

47K

C110

0.001

CHASSIS

GND

R123

10K

R122

Q103

J601

HEADPHONES

KTC3200 GR

R662

330

R121

10K

Q104

KTC3200 GR

0.6V

R118

L603

10µH

47K

1.2V

Q101

KTC3200 GR

R119

33K

C113

0.022

R120

C120

220/16

–B

A_GND

903

99 GR

M_GND

4.9V

+B M_12V

CD_GND

C905

100/10

5.6V

CD_6R2V

902

6BSB

32 1-F

CNS652

FROM

DISPLAY PWB-A3

Figure 27 SCHEMATIC DIAGRAM (2/10)

Download from Www.Somanuals.com. All Manuals Search And Download.

– 27 –

XL-3000V

R883

8.2

CNW807

CNS807

R884

8.2

Q805

KTA1266 GR

11.3V

10.6V

0.2V

R870

33K

R867

0.67V

Q804

3.3K

11.7V

R868

27K

KTC3199 GR

R873

3.3K

R882

6.8K

C892

47/16

R885

22K

R881

470K

Q807

D805

1N4004

KTC3200 GR

0.63V

0.1V

FAN

R880

3.3K

0.9V

LIGHT

DIMMER

CD_STB

R888

10K

C893

47/16

0.7V

R837

AMP_DEC

FAN_DEC

CLID_SW

CLID_PRO

CLID_UP

CLID_DW

Q806

2SC535 C

R866

4.7K

C872

0.1

CNP702

D803

1N4004

R864

27K

4.9V

0.64V

R865

27K

D804

1N4004

R813

R887

22K

L80

10µ

CNS801

DGND

/RST

R836

R835

R834

R833

R832

R831

R830

PU_IN

LRCK

BCK

L806

10µH

CNW801

R814

3.3K

C825

0.056

C823

0.01

R812

3.3K

C819

0.1

C824

0.056

C887

0.0027

C822

220/10

C818

0.1

R820

R811

2.2K

R810

3.3K

80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51

C810

0.001

2.4V

2.1V

2.2V

2.1V

2.2V

2.1V

R809

10K

C811

47/10

C830

0.056

C828

100/10

83 DVDD

84 DVR

85 LO

FOO

TEZI

2.3V

2.4V

81 DVSR

R808

3.3K

C809

0.0047

TEI

TSIN

SBAD

FEI

VREF

86 DVSL

49 TRO

C840

100/10

R819

220

C868

220P

TEST1

C862

0.001

C869

220P

88 TEST2

89 TEST3

90 BUS0

91 BUS1

92 BUS2

C807

0.033

RFRP

RFZI

RFCT

AVDD

RFI

IC802

TC9462F

4.3V

R807

10K

C867

220P

C806

0.0047

SERVO/SIGNAL CONTROL

C866

220P

2.1V

BUS3

C805

0.0027

SLCO

AVSS

VCOF

94 VDD

95 VSS

96 BUCK

97 /CCE

1.4V

2.1V

C804

0.01

99 /TSMOD

3.3V

C865

220P

VCOREV

PVREV

100

/RST

R854

100K

2.1V

LPFO

C835

0.056

C803

47/10

TEST4

2.1V

LPFN

2.1V

4.9V¹⁰⁰

C864

220P

C837

470P

C86

470

R806

15K

C802

0.015

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

R804

100K

R851

R801

10K

R802

47K

330

C820

0.01

C801

100P

C829

100/10

CNS805

CNW805

• NOTES ON SCHEMATIC DIAGRAM can be found on page 19.

• The numbers 1 to 15 are waveform numbers shown in page 41.

Figure 28 SCHEMATIC DIAGRAM (3/10)

Download from Www.Somanuals.com. All Manuals Search And Download.

– 28 –

XL-3000V

10.7V

11.4V

Q902

KTA1266 GR

MAIN PWB-A1(2/2)

LED PWB-A6

Q901

KRC102 M

R902

47K

11.4V

4.1V

R914

470

CNS701

CNW701

R901

2.2K

D801

AUY3333

IC805

TA7291S

CNP701

CD LID

MOTOR DRIVER

11.4V

SWITCH PWB-A5

10.6V

Q907

SW802

CD LID

R873

3.3K

CNS806

CNP806

R905

47K

OPEN/CLOSE

KTA1266 GR

R879

3.3K

4.4V

Q908

KRC102 M

R904

2.2K

R874

2.2K

Q802

KRC102 M

CNW806

4.5V

R877

68K

R876

150K

CNP804

CNS804

CNW804

C872

0.1

M801

CD LID

OPEN/CLOSE

MOTOR

A_GND

M_GND

M_12V

C870

0.001

Q861

D_GND

2SB562 C

CD_6R2V

7.1V

L803

10µH

14 13 12 11 10

CD MOTOR PWB-C

NM802

SPINDLE

CNS803

MOTOR

SP+

SP–

SL+

SL–

SP+

SP–

SP+

SL–

–

15 16 17 18 19 20 21 22 23 24 25 26 27 28

NM801

SLED

MOTOR

–

PU-IN

GND

PU-IN

GND

NSW801

PICKUP IN

R863

2.2K

C844

0.0068

PICKUP UNIT(308)

811

7/10

CNP802

CNW3

FO-

TR+

TR-

FO+

GND

FO–

TR+

TR–

TR+

TR-

R823

R824

47K

FO+

C842

47/10

2.1V

2.2V

2.1V

2.2V 12

2.1V 11

4.3V 10

PO+

R825

82K

R821

C845

100/10

150

R822

ACTUATOR

2.1V

2.5V

3.4V

GND

C846

0.1

4.1V

R80B

68K

3.4V

Q801

KTA1266 GR

19 2.1V

C847

0.1

2.1V

R826

2.7K

C848

39P

22 1.7V

23 0V

R828

1.2K

1/2VCC

+5V

R80E

82K

24 2.1V

1/2V

R827

39K

C839

R829

68K

C843

0.1

R80A

82K

R80C

82K

C863

470P

IC801

TA2109F

SERVO PRE AMP.

C849

0.056

C855

100/10

R80F

82K

VREF

R80G

68K

GND

MON

VCC

Figure 29 SCHEMATIC DIAGRAM (4/10)

Download from Www.Somanuals.com. All Manuals Search And Download.

– 29 –

XL-3000V

T302

Tracking

FM Mute

Level

VR351

10K(B)

C302

0.001

L353

1mH

C329

0.022

D301

1N4148

C335

560P

D302

1N4148

R323

68K

R336

5.6K

24 23

T306

AM Band

Coverage

IC301

TA7358AP

FM FRONT END

BF301

BAND PASS

FILTER

R306

R316

330

C318

FM IF

T304

CF303

CF302

R307

R312

2.2K

C303

0.001

C312

33P

C304

0.01

L302

FM ANT.

L303

FM OSC.

R303

33K

FM RF

C314

22P

(CH)

D305

3.6V

R382

330

R301

1N4148

0.8V

R386

330

TP301

C311

10P(CH)

R308

10K

2.3V

GND

R305

680

R304

47K

C315

100P

0.8V

75ohms

C316

10/16

D306

1N4148

R315

SO301

ANTENNA

TERMINAL

C381

12P(CH)

R310

4.7K

X352

4.5MHz

C301

0.012

C382

15P(CH)

CHASSIS

GND

C349

0.001

C384

^0.001PLL

• NOTES ON SCHEMATIC DIAGRAM can be found on page 19.

Figure 30 SCHEMATIC DIAGRAM (5/10)

Download from Www.Somanuals.com. All Manuals Search And Download.

– 30 –

XL-3000V

TUNER PWB-A2

AM SIGNAL

FM SIGNAL

Q351

KRC104 M

3.7V

(0V)

4.7V

C371

1/50

(0V) 2

R361

5.6K

R350

2.7K

C367

1/50

R362

5.6K

C372

1/50

2.3V

19 18

15 14

R366

2.2K

10 11

C358

1/50

C350

0.022

CF352

C357

2.2/50

C356

0.001

T351

AM IF

FM ST

ZD351

DZ5.1BSB

L352

100µH

C396

MAIN PWB-A1(1/2)

100/10

R393

CNP307

P26 5,6-A

A_12V

D_GND

TUN_L

TUN_R

A_GND

R391

390

C395

0.022

R377

5.6K

R392

390

L351

100µH

R380

1.5K

C393

1/50

CNS307

Q360

KTA1266 GR

10.8V

11.7V

2.6V

22 21 20

R383

5.6K

17 16 15 14 13 12

CH)

10.9V

R385

5.6K

R384

6.8K

CH)

R359

1.8K

D308

1N4148

IC302

LC72131

R360

4.7K

¹PLL(TUNER)

Figure 31 SCHEMATIC DIAGRAM (6/10)

Download from Www.Somanuals.com. All Manuals Search And Download.

– 31 –

XL-3000V

DISPLAY PWB-A3

SW727

FUNCTION

SW726

REW

PRESET DOWN

R706

3.9K

10 11 12 13 14

SW718

VOLUME DOWN

SW725

CD STOP

TUNING DOWN

R718

1.5K

R707

2.7K

SW713

VOLUME UP

R708

2.2K

R719

1.2K

SW712

SW722

CD PLAY/ PAUSE

TUNING UP

R710

2.7K

BASS/TREBLE

100 99 98 97 96

94 93 92 91

COM3

R720A

1.2K

COM2

COM1

COM0

VLC3

VLC2

VLC1

VDD

SW711

SW721

MEMORY/SET

2.47V

R711

1.2K

R720B

1.2K

PRESET UP

R727

47K

R729

47K

1.7V

3.25V

R723 47K

R728 1K

LAMP PWB-A7

2.49V

2.47V

SW709

ON/

STAND-BY

OSC2

C703

0.1

10 OSC1

11 VSS

12 XI

R702

10K

X701

8MHz

24V

2.24V

2.47V

X702

32.768kHz

13 XO

GND

C701

22P(CH)

MMOD

SW710

CD LID

OPEN/CLOSE

LMP701

15 VREF–

SYSTEM

R731 1K

R732 1K

R733 1K

R734 1K

R795

47K

CLID_SW

17 KEY1

KEY2

CFW701B

2 1

MODEL

R735

20 CLID_PRO

MOT_DEC

4.9V

R721

10K

23 VSM

4.9V

24 VREF+

2 1

CFW701A

26 27 28 29 30 31 32 33 34 35

L702

2.2µH

C705

0.01

R744

D_GND

P_CONT

USWD_5R6V

D722

D723

1N4148

R7A0

R7A9

3.3K

R7B0

10K

R7A5

10K

RX701

REMOTE

SENSOR

R7A3

100

Q701

KRC102 M

0.4V

Q702

0.4V

R7A6

1.1V

KTC3199 GR

4.8V

0.4V

R7A7

R7A4

120

0.4V

Q703

KTC3199 GR

R7A1

C714

560P

R7A8

Q708

KTA1266 GR

R778 47K

R780 47K

Q709

R779

47K

R798

4.7K

KRC102 M

4.2V

R796

R781

47K

0.1V

4.5V

R797

2.2K

Q707

R783

33K

KTA1266 GR

24.5V

Q706

KRC102 M

24.5V

C704

0.022

R792

47K

0.1V

4.1V

23.7V

R793

10K

• NOTES ON SCHEMATIC DIAGRAM can be found on page 19.

Figure 32 SCHEMATIC DIAGRAM (7/10)

Download from Www.Somanuals.com. All Manuals Search And Download.

– 32 –

XL-3000V

LCD701

LCD DISPLAY

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38

89 88 87

85 84 83 82 81 80 79 78 77

95 94 93 92 91 90

SEG25

SEG26 74

2.5V

SEG27

SEG28

SEG29

SEG30

SEG31

SEG32

SEG33

2.5V

4.9V

CNW702

CLID_DW

CNS702

CLID_UP

CLID_PRO

CLID_SW

FAN

IC701

IX0038SJ

SYSTEM MICROCOMPUTER/

FL DRIVER

CD_STB

R766 1K

CD_STB

AMP_DEC

4.9V

CD_STB

CD_RES

PU–IN

LIGHT

DIMMER

FAN_DEC

CLID_DW

CLID_UP

R769 1K

R770 1K

CLID_DW

CLID_UP

FAN

4.9V

R771

4.72V

4.76V

4.8V

R772 1K

R773 1K

DIMMER

LIGHT

AMP_DEC

R768

4.8V

CNS704

R785

B-LIGHT

31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

VD_DI

VD_DO

ACK

BUSY

CLID_OUT

GND

STB

CNW704

P_CONT

CNS703

STEREO

CLID_OUT

BUSY

CD+B

P_MUTE

P_STB

CD+B

P_MUTE

P_STB

ACK

A_24V

VD_DI

D_GND

VD_DO

SURROUND

CNW703A

CLID_SW

B-LIGHT

SURROUND

Figure 33 SCHEMATIC DIAGRAM (8/10)

Download from Www.Somanuals.com. All Manuals Search And Download.

– 33 –

XL-3000V

VIDEO PWB-D

Q11V

2SD1858 R2

4.5V

3.8V

C125V

100/10

R143V

220

R5V

4.7K

R97V

4.7K

C115V

22/25

3.4V

1.6V

1.8V

1.9V

2.0V

1.9V

1.7V

1.2V

1.3V

1.6V

VCC

VPP

A16

A15

A12

R93V

4.7K

R91V

4.7K

R98V

4.7K

31 PGM/A18

3.2V

A17

A14

A13

2.0V

1.3V

1.7V

1.6V

A11

A10

1.9V

0.3V

1.2V

1.5V

1.4V

14 D1

15 D2

16 VSS

C122V

0.1

1.4V

IC10V

IX0041SJ

ROM 256Kx16

TO CHASSIS

GND

C119V

0.1

R163V

80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51

1.6V

1.3V

2.0V

1.6V

3.4V

3.2V

1.5V

0.1V

1.8V

2.1V

0.1V

VSS

VCC

0.2V

R164V

AUX4

82 LA12

83 LA13

84 LA14

85 LA15

86 LA16

87 LA17

88 AUDIOCLK

89 AUDATA

90 BCLK

91 LR

92 DRAS1/DOE

93 RSD

VD_DI

VD_DO

0.2V

R165V

AUX2/VD_DO

AUX1/DSADATA

AUX0/DSAACK

PCLKQSCN

PCLK2XSCN

DCLK

AUX3/VD_DI

2.3V

2.2V

0.2V

4.5V

4.8V

1.0V

1.2V

1.9V

2.3V

0.6V

1.8V

3.6V

R161V

MCLK

TSD

TBCK

TWS

R166V

IC15V

ES3880F

R168V

HSYNC

VSYNC

R156V

4.7K

R169V

VIDEO CD DECODER

YUV7 39

YUV6 38

YUV5 37

YUV4 36

YUV3 35

YUV2 34

YUV1

YUV0 32

VCC3

RBCLK

95 RWS

2.6V

R157V

820

TDMCLK

97 TDMDR

3.5V

3.0V

100

TDMFS

DCAS

VSS

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

C116V

0.1

20 19 18 17 16 15 14 13 12 11 10

C118V

22/25

C102V

22/25

21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

AUX0

IC16V

IX0025SJ

R08A

4.7K

D-RAM 256Kx16

R12AV

4.7K

• NOTES ON SCHEMATIC DIAGRAM can be found on page 19.

• The numbers 16 and 17 are waveform numbers shown in page 41.

Figure 34 SCHEMATIC DIAGRAM (9/10)

Download from Www.Somanuals.com. All Manuals Search And Download.

– 34 –

XL-3000V

VDAC

IC11V

C171V

10/25

NJM4565M

R115V

15K

BUFFER AMP.

C144V

33P(CH)

C143V

33P

(CH)

VIDEO SIGNAL

CD SIGNAL

6.1V

R107V

10K

R108V

10K

R116V

15K

VDAC

C172V

10/25

–

5.3V

CNS802

5.3V

AGNDV

L-CH

AGNDA

R-CH

+5V

R185V

10K

R186V

10K

10.9V

DGND

+12V

R123V

CNW802V

C140V

10/25

C103V

R121V

3.3K

22/25

Q12V

5.7V

2.9V

2SC1740 SR

R195V

100

C138V

10/25

3.6V

R124V

220

C104V

100/10

R112V

R114V

6.8K

C139V

10/25

C101V

R113V 1000/6.3

100

R111V

2.2K

C137V

10/25

R137V

BUSY

VD_DI

VD_DO

ACK

R138V

R140V

R139V

STB

DGND

CLID_OUT

R141V

L103V

3.3µH

R178V

CNP804V

L104V

3.3µH

C136V

0.1

R171V

100K

C131V

0.001(CH)

L11V

10µH

X1V

27MHz

C184V

0.1

C150V

0.1

C183V

22P(CH)

R163V

80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51

27MHz

R164V

^1.2V81

^4.5V82

MIC2

MIC1

AOL+

AOL–

AOR–

AOR+

VCCA

VREFP

VCM

DSC_D7

HSYN_B

^1.5V83

^4.8V84

^1.4V85

^1.0V86

^1.2V87

^1.9V88

R165V

2.3V

DSC_D6

VSYN_B

DSC_D5

YUV7

YUV6

YUV5

YUV4

VCC

VSS

YUV3

DSC_D4

YUV2

DSC_D3

YUV1

DSC_D2

YUV0

DSC_D1

VSS

C162V

0.1

^1.9V89

2.3V

C164V

47/10

IC14V

ES3883F

VSSA

BUSY/AUX15

S_EN/AUX14

LA18/AUX13

RBCK

NC/AUX12

NC/AUX11

NC/AUX10

_2.3V91

C165V

0.1

VIDEO CD ENCODER

_1.4V92

_0.6V93

_1.4V94

_0.8V95

_1.6V96

_0.8V97

_1.3V98

RSD 33

VCC

VSS

R100V

4.7K

0V ₁₀₀

R105V

4.7K

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

C130V

0.1

R06AV

4.7K

R01AV

4.7K

R193V

4.7K

R07AV

4.7K

R10AV

R02AV

4.7K

CNP801V

DGND

4.7K

R03AV

4.7K

R11AV

4.7K

EAUX0

/RST

BUS0

BUS1

BUS2

BUS3

BUCK

/CCE

PU_IN

LRCK

BCK

EAUX01

EAUX02

EAUX03

EAUX08

EAUX04

R08AV

4.7K

R09AV

4.7K

2AV

.7K

DATA

CNW801

Figure 35 SCHEMATIC DIAGRAM (10/10)

Download from Www.Somanuals.com. All Manuals Search And Download.

– 35 –

XL-3000V

M802

FAN MOTOR

CFW451

TO CHASSIS GND

LUG(205)

C413

TERMINAL PWB-A4

C412

SO401

R408

LEFT

R406

VIDEO/

AUX IN

RIGHT

CNP807

R407

CNS807

L401

R405

C411

CNS607

VIDEO

OUT

SO601

SPEAKER

TERMINAL

FROM

POWER

CNP801

TRANSFORMER

P38 4-C,D

CFW452

TO CHASSIS GND

LUG(205)

D412

D411

L402

D659

C660

C414

CNP608

C613

L601

CNS608

C659

D660

LEFT

C615

C630

F653

C851

CNS805

T1.6A L 250V

C852

J801

DIGTAL

OUT

D657

R637

C657

D901

C658

L802

C853

CNP805

D658

C901

C651

L602

CFW852

TO CHASSIS GND

LUG(205)

RIGHT

C126

C614

C616

CHASSIS

GND

C654

R638

D902

C902

J601

HEAD

C640

C125

CHASSIS

GND

C639

PHONES

LUG

(205)

D652

L603

16 14 12 10

15 13 11

C109

R115

D651

D653

R873

C101

R103

R661

R662

R104

CNP802

C104

Q908

D654

C103

R90

C105

C903

R910

R911

Q904

C107

C111

IC601

Q901

R821

COLOR TABLE

C904

R902

R113

RD(R)

BROWN

RED

R901

ZD901

C113

C110

R109

ORANGE

YELLOW

GREEN

BLUE

R620

C112

C116

CHASSIS

GND

C620

D602

R827

R114

C114

C83

R629

Q903

C108

Q603

R628

VIOLET

GRAY

R829

R619

14 R106

R912

C106

C906

WH(W) WHITE

C905

R110

R102

Q606

ZD902

BLACK

PINK

Q601

D603

CNP652

C629

R108

C601

C102

R621

Q610

R613

Q602

Q102

D605

C627

R609

R123

R121

Q607

R607

C603

R610

CNP601

C626

R634

IC682

R122

C602

Q103

D604

C628

Q609

R612

Q101

Q608

R119

C120

R124

R864

R865

D803

D804

R118

Q104

R120

CNP

CNW601

FROM DISPLAY

PWB-A3

CNW602

CNS652

P39 10-A

FROM

VIDEO

PWB-D

TO TU

PWB

CNS802

P40 1-A,B

CNS307

P38,39 6,7-A

• The numbers 1 to 15 are waveform numbers shown in page 41.

Figure 36 WIRING SIDE OF P.W.BOARD (1/5)

Download from Www.Somanuals.com. All Manuals Search And Download.

– 36 –

XL-3000V

CNS804

CNW804

MAIN PWB-A1

RED

M801

CD LID

OPEN/CLOSE

MOTOR

C208

R217

C215

R205

R213

R211

C209

C203

C214

R209

C212

C213

C211

R437

R215

R206

R208

C202

R203

Q201

R218

R210

IC201

S G

C204

C216

C416

D201

C418

R438

SWITCH PWB-A5

R216

R214

R212

R440

C408

CNP801

SW802

CD LID

OPEN/CLOSE

C424

C422

C426

C433

MER

CNW607

R207

R401

Q203

C432

C407

R422

R418

D659

C660

C402

C404

R403

R416

C415

C420

C419

R404

IC401

F652

T3.15A L 250V

C403

C425

CNW806

R415

R417

C431

R423

R421

C417

R880

C657

D901

CNS806

C429

C892

C893

R439

D401

R882

Q807

C901

C651

Q805

C430

NM802

SPINDLE

MOTOR

FROM DISPLAY

PWB-A3

Q806

R868

CNS703

CNP703

R867

Q804

R870

F651

T3.15A L 250V

P39 10-B,C

13121110 9

ASSIS

GND

C654

TO VIDEO

CNS801

1210 8

CNP702

PWB-D

CNP801V

P40 2-B,C

9 10

R837

11 9

R877

R876

NSW801

PICKUP IN

D802

R836

Q803

R833

R835

R887

R830

CNP806

CNW801

CNP804

R831

R834

C865

C867

C837

C868

C869

Q802

IC805

C836

C835 R832

FROM DISPLAY

PWB-A3

R853

R852

R873

1100

C871

C829

R851

C866

C828

C840

CNS702

R819

C862

R843

CNW805

CNP803

2 3 4 5 6

Q907

C820

P39 10-F

Q908

C863

R801

NM801

SLED

MOTOR

C830

R813

R904

R802

R806

IC802

C827

Q902

R820

Q901

C801

C802

R902

CD MOTOR PWB-C

C822

X801

C804

R807

CNP701

C803

R901

C826

L806

C870

C813

C850

C823

R814

C806

C807

L803

R810

C855

C821

C848

C817

C819

R828

R827

C844

R826

C818

C846

Q861

C839

R861

R825

C811

R823

CNS803

CNW803

R829

C842

R824

C858

IC801

L801

R80B

C841

IC804 ⁵

R862

R80G

PICKUP UNIT(308)

R863

Q801

D606

D801

CNS701

CNW701

CNW3

R914

10 11

CNP307

LED PWB-A6

11 15

TO TUNER

PWB-A2

CNS307

P38,39 6,7-A

Figure 37 WIRING SIDE OF P.W.BOARD (2/5)

Download from Www.Somanuals.com. All Manuals Search And Download.

– 37 –

XL-3000V

TUNER PWB-A2

CNP307

P36,37 6,7-G

TP301

9 1011

X352

C384

CNS307

R374

R373

R372

C397

R379

C380

Q360

D308

C391

C395

R391

R392

SO301

C392

R365

ANTENNA

TERMINAL

R371

R386

R380

R387

L351

C394

R385

C387

C396

ZD351

R382

C301

R384

OHMS

R381

IC302

C393

C315

C370

L353

C357

R355

R309

C398

CF352

T351

L303

GND

C316

VD302

R308

C313

C355

R305

C317

CF351

R353

Q351

C308

C358

C314

VR351

C309

R352

CF302

R303

Q302

R315

C399

R304

10 1112

R313

C305

R307

R351

C360

C304

C319

R302

VD303

C332

IC303

C307

C303

C306

C350

C361

24 23 22 21 20 19 18 17 16 15 14 13

BF301

C373

Q306

D306

C335

L302

D301

C371

VD301

R362

C374

C372

C302

C349

D302

CHASSIS

GND

C364

T306

C329

T302

R356

TO MAIN

PWB-A1

CNP801

P36,37 6,7-B,C

T651

POWER TRANSFORMER

(MAIN)

F654

T.F 2A,250V

AC110/127/220/

230~240V, 50/60Hz

POWER PWB-B

AC POWER SUPPLY CORD

RLY601

D689

D685

SW651

VOLTAGE SELECTOR

CNP651

R685

230~240V

220V

Q683

Q681

R686

127V

110V

SO655

AC POWER

INPUT SOCKET

AC110/127/220/

230~240V, 50/60Hz

T681

POWER TRANSFORMER

(SUB)

Figure 38 WIRING SIDE OF P.W.BOARD (3/5)

Download from Www.Somanuals.com. All Manuals Search And Download.

– 38 –

XL-3000V

LMP701

TO MAIN

PWB-A1

CNP652

P36 5-F

TO MAIN

PWB-A1

CNP307

P36,37 6,7-G

9 1011

LAMP PWB-A7

CNS652

Q706

CNS707

R792

R708

Q707

Q708

SW718

R781

R779

R780

CNS703

R755

R742

R757

R758

R720B

TO MAIN

PWB-A1

C373

CNP703

R739

P37 8,9-D

R751

R741

C703

C713

R761

RX701

REMOTE

SENSOR

TO VIDEO

PWB-D

R725

R776

R777

CNP804V

P40 4,5-C

R782

R723

R727

R729

R764

CNS704

CNW704

IC701

100

R750

R768

COLOR TABLE

RD(R)

BROWN

RED

ORANGE

YELLOW

GREEN

BLUE

F654

T.F 2A,250V

R772

VIOLET

GRAY

WH(W) WHITE

BLACK

PINK

CNS702

CNW653

TO MAIN

R766

PWB-A1

CNP702

P37 8-D

R735

R731

R783

ZD701

R7A1

R685

C711

683

Q703

ZD683

CNP707

R689

Q681

R688

Q702

R707

C704

D686

R7A8

C712

C710

Q701

D688

R686

R687

C688

R720A

SW712

D681

D682

CD PLAY/PAUSE

TUNING

D684

CD LID

OPEN/CLOSE

D683

DISPLAY PWB-A3

Figure 39 WIRING SIDE OF P.W.BOARD (4/5)

Download from Www.Somanuals.com. All Manuals Search And Download.

– 39 –

XL-3000V

17 16

VIDEO PWB-D (TOP VIEW)

C141V R181V

R108V

C118V

C144V

R185V

R186V

C115V

C112V

C172V

C111V

C122V

R190V

R188V

C117V

CNS802

C143V

IC11V

C142V

R104V

C102V

R184V

R103V

R195V

R187V

IC16V

C171V

R101V

R115V

R182V

TO MAIN

PWB-A1

C149V

C138V

R189V

R162V

CNP802A

P36 5-F

C148V

C167V

C168V

R116V

C147V

C139V

C137V

C140V

C116V

C121V

R102V

C110V

100_R158V

C159V

R156V

R160V

R169V

C120V

IC10V

C166V

CNP801V

100

R168V

R166V

R105V

R159V

CNW801

TO MAIN

R165V

R164V

R163V

IC15V

R100V

R94AV

R161V

R09AV

PWB-A1

CNS801

P37 9-D

IC14V

C127V

R08AV

R12AV

R167V

R170V

70 75

C164V

C165V

C162V

70 75

C109V

C183V

C108V

C150V

C103V

C184V

R194V

C136V

TC100V

C160V

C169V

L11V

CNP804V

C124V

R143V

C105V

Q12V

R91V

L103V

L104V

R5V

R171V

R178V

C158V

C161V

R124V

C131V

C104V

C125V

R123V

C126V

R121V

R114V

X1V

R93V

R112V

R111V

C101V

Q11V

R97V

R98V

R113V

FROM DISPLAY

PWB-A3

CNS704

P39 10-C,D

VIDEO PWB-D (BOTTOM VIEW)

C101V

Q11V

X1V

C104V

R5V

C125V

C158V

C161V

L103V

L104V

Q12V

CNP804V

L11V

TC100V

C103V

CNP801V

C109V

C164V

C166V

IC10V

C121V

C147V

C139V

C137V

C140V

C138V

C148V

C171V

C172V

C102V

C115V

C118V

CHASSIS

GND

• The numbers 16 and 17 are waveform numbers shown in page 41.

Figure 40 WIRING SIDE OF P.W.BOARD (5/5)

Download from Www.Somanuals.com. All Manuals Search And Download.

– 40 –

XL-3000V

WAVEFORMS OF CD CIRCUIT

NO DISC FOCUS SEARCH

FOCUS SEARCH TOC IL

STOP PLAY

TMAX

FOO

IC802 30pin

IC802 48pin

SBOK

FO+

IC804 26pin

IC802 12pin

FO-

DMO

IC804 27pin

IC802 55pin

STOP PLAY

SEL

TEI

IC802 57pin

IC802 46pin

FEI

TEI

TRO

IC802 49pin

IC802 43pin

FMO

IC802 46pin

IC802 53pin

CUE

TEI

FEI

IC802 43pin

IC802 46pin

SBAD

IC802 44pin

TRO

IC802 49pin

RFO

FMO

IC802 53pin

IC801 22pin

STOP PLAY

REVIEW

TEI

FEI

IC802 43pin

IC802 46pin

RFGO

IC801 19pin

TRO

IC802 49pin

RFRP

FMO

IC801 17pin

IC802 53pin

STOP PLAY

TCD-782 TNO-02 PLAYBACK

TEI

IC802 46pin

IC11V 7pin

TRO

IC802 49pin

SBAD

IC802 44pin

IC11V 1pin

Download from Www.Somanuals.com. All Manuals Search And Download.

– 41 –

XL-3000V

TROUBLESHOOTING

When the CD does not function

When the CD section does not operate when the objective lens of the optical pickup is dirty, this section may not operate. Clean

the objective lens, and check the playback operation. When this section does not operate even after the above step is taken, check

the following items.

Remove the cabinet and follow the troubleshooting instructions.

"Track skipping and/or no TOC (Table Of Contents) may be caused by build up of dust other foreign matter on the laser pickup

lens. Before attempting any adjustment make certain that the lens is clean. If not, clean it as mentioned below."

Turn off the power, and wipe the lens softly using a cleaning paper moistened with commercially available cleaning solution so

as not to damage it.

Be careful not to touch the lens with bare hands.

Dust gradually accumulates on the objective lens during use, and it may degrade performance.

To avoid this problem, use a cleaning disc designed for CD optical pickup lenses.

HOW TO USE

1. Using the brush in the cleaner cap, apply 1 or 2 drops of the cleaning fluid to the brush on the CD cleaner disc which has

the mark next to it.

2. Place the CD cleaner disc onto the CD disc tray with the brush side down, then press the play button.

3. Youwillhearmusicforabout20secondsandtheCDplayerwillautomaticallystop. Ifitcontinuestoturn, pressthestopbutton.

CAUTION

The CD lens cleaner should be effective for 30 - 50 operations, however if the brushes become worn out earlier then please

replace the cleaner disc.

If the CD cleaner brushes become very wet then wipe off any excess fluid with a soft cloth.

Do not drink the cleaner fluid or allow it to come in contact with the eyes. In the event of this happening then drink and / or

rinse with clean water and seek medical advice.

The CD cleaner disc must not be used on car CD player or on computer CD ROM drives.

Cleaner Liquid

Cleaning Disc

PARTS CODE: UDSKA0004AFZZ

Download from Www.Somanuals.com. All Manuals Search And Download.

– 42 –

XL-3000V

Make sure that the disc is normal, and set the CD TEST MODE (STEP 1).

Is the measured voltage as specified in circuit diagram?

Check the main unit power supply circuit.

Yes

Is "Er-CD01" displayed"?

Yes

Move the pickup to most internal circumference side of disc.

Check the pattern between pin 58 (PU_IN) of IC701 and

CNW803/CNS803.

Turn the power off and reset the CD TEST MODE (STEP 1).

Is "PU ERROR " not displayed?

Check the between CNW803/CNS803 and PU-IN switch.

Yes

Is +5V applied to pin 100 (/RST) of IC802?

Yes

Check the PWB pattern between pin 59 (CD_RES) of IC701 and

pin 100 (/RST) of IC802.

Set ON condition the CD

Lid switch.

Does the CD TEST MODE advance from "STEP 2"?

Yes

Is CD Lid switch SW802

ON condition ?

Yes

Check the between pattern IC701 and SW802 If OK.

Check the main unit power supply circuit.

Does the laser come on in CD TEST MODE "STEP 2"?

Yes

Check the procedure in "LASER FAILURE".

Check the procedure in "FOCUS FAILURE".

Does the CD TEST MODE advance from "STEP 3" to "STEP

4"?

Yes

Check the procedure in "SPINDLE MOTOR CLV SERVO

FAILURE".

Does the spindle motor rotate normally when the CD TEST

MODE changes from "STEP 4" to "STEP 3"?

Yes

Is the HF output on pin 38 of IC802 in CD TEST MODE "STEP 5"?

Yes

Check the procedure "HF ERROR".

Does the sound heard when the optical pickup move to the

Does the sled motor

move ?

Check the procedure in

"SLED MOTOR

selected play by the FF

/REW

key.

OPERATING FAILURE ".

Yes

Check the procedure "NO SOUND"

Check the pattern between IC701 and LCD701.

Does the LCD track number and time indicator work properly ?

Yes

Turn the power off and then back on.

Does the unit initialize properly and start playback when PLAY

key is pressed?

Is "Er-CD01 "

displayed ?

Check the procedure in

"HF ERROR".

Yes

Check the pattern between pin 58 (PU_IN) of IC701

and CNW803/CNS803. Check the between CNW803/

CNS803 and PU-IN switch.

Does the unit play in order in the FF mode?

Yes

Check the procedure in "TRACK SEARCH FAILURE".

Check the procedure in "SLED SERVO FAILURE".

Does playback continue for 30 seconds after the start of

playback ?

Yes

Normal

Download from Www.Somanuals.com. All Manuals Search And Download.

– 43 –

XL-3000V

• Laser failure.

Is +6.2V applied to the emitter of Q861 ?

Yes

Check the PWB pattern between emitter of Q607 and emitter of

Q861.

Check the peripheral parts of IC804 and Q861.

Is +5V applied to the collector of Q861 ?

Yes

Check the PWB pattern between collector of Q861 and pin 62 of

IC802.

Is +5V applied to the pin 62 (VDD) of IC802 ?

Yes

Check the PWB pattern between collector of Q861 and pin 1 of

IC801.

Is +5V applied to the pin 1 (VCC) of IC801 ?

Yes

Does the laser come on when pattern cut between pin 8 (SEL) of

IC801 and pin 57 (SEL) of IC802 ?

Is 0V applied to the pin 57 (SEL) of IC802 ?

Yes

Check the PWB pattern between IC701 and IC802 (BUCK/CCE/

BUS0~3)

Check the peripheral parts of IC801 and Q801. If it is normal, the

optical pickup is faulty.

Is approx. 2V applied to the collector of Q801.

Yes

Check CNP802/CNW3. If it is normal, the optical pickup is

faulty.

• Focus failure.

Does the optical pickup move up and down when the disc is

removed?

Check as stated in item "FOCUS SERVO SAWTOOTH WAVE

FAILURE".

Yes

Is the following waveform output at the pin 43 (FEI) of IC802

when the disc is set?

Check the periphery of IC801 and CNP802/CNW3. Is it normal?

Yes

pin 43

(FEI)

The optical pickup is faulty.

pin 48

(FOO)

pin 44

(SBAD)

Is the waveform shown above input at the pin 44 (SBAD) of

IC802?

Check the pattern between pin 13 of IC801 and pin 44 of IC802.

Check the periphery of IC801 and CNP802/CNW3.

Yes

IC801 is faulty.

Download from Www.Somanuals.com. All Manuals Search And Download.

– 44 –

XL-3000V

• Focus servo sawtooth wave failure.

IC802 is faulty.

Is sawtooth wave output to the pin 48 (FOO) of IC802 ?

Yes

1.5~2.5sec

Check the PWB pattern between emitter of Q607 and IC804.

Is +6.2V applied to the pins 21 and 22 (VCC) of IC804 ?

Yes

Is +5V applied to the pin 7

(MUTE) of IC804 ?

Check the PWB pattern

between pin 7 of IC804

and pin 60 (CD STB) of

IC701.

Is sawtooth wave obtained between pins 26 and 27 of IC804 ?

Yes

1.5~2.5sec

Check the PWB pattern between pin 48 (FOO) of IC802 and pins

24 and 25 of IC804. If OK. IC804 is faulty.

Is sawtooth wave obtained between pins 13 and 16 of

CNP802/CNW3 ? (as shown above)

Check the PWB pattern between CNP802/CNW3 and IC804.

Yes

CNP802/CNW3 connection failure or optical pickup failure.

• Spindle motor clv servo failure.

Check the procedure in "HF ERROR".

If OK. IC802 is faulty.

Is following wave output to the pin 55 (DMO) of IC802 when

the CD TEST MODE "STEP 3" is changed to " STEP 4" ?

Yes

DMO

Is above wave obtained between pins 11 and 12 of IC804 ?

Yes

Check the PWB pattern between pin 55 (DMO) of IC802 and pins

9 and 10 of IC804. If OK. IC804 is faulty.

Check the PWB pattern between CNP802/CNW3 and IC804.

Is above wave obtained between pins 9 and 12 of CNP802/

CNW3 ?

Yes

CNP802/CNW3 connection failure or optical pickup failure.

Download from Www.Somanuals.com. All Manuals Search And Download.

– 45 –

XL-3000V

• HF error.

Optical pickup failure.

IC801 is faulty.

Is output (tracking error signal) obtained at the pins 46 (TEI)

and 47 (TEZI) of IC802 the CD TEST MODE "STEP 4" is

changed to "STEP 5"?

Is output obtained at the pins 3 and

8 of CNP802/CNW3.

Yes

Check the periphery of IC801.

Check the PWB pattern between

pin 12 (TEO) of IC801 and pins 46

and 47 of IC802.

test mode "step 4"

test mode "step 5"

TEI

TEZI

Is it normal ?

Yes

Check the PWB pattern between pin 49 (TRO) of IC802 and pin 19

of IC804.

Check the periphery of IC804 and CNP802/CNW3.

If OK. Optical pickup failure.

Is output obtained at the pins 4 and

Optical pickup failure.

Is output (HF signal) obtained at the pin 38 (RFI) of IC802

when the CD TEST MODE "STEP 4" is changed to "STEP 5"?

5,6 of CNP802/CNW3.

Yes

test mode "step 4"

test mode "step 5"

Check the periphery of IC801.

Check the PWB pattern between pin 19 (RFGO) of IC801 and pin

38 (RFI) of IC802.

RFI

If OK. IC801 is faulty

Is output (HF signal) obtained at the pins 41 (RFZI) and 42

(RFRP) of IC802 when the CD TEST MODE "STEP 4" is

changed to "STEP 5"?

Check the periphery of IC801.

Check the PWB pattern between pin17 (RFRP) of IC801 and pins

41 (RFZI) and 42 (RFRP) of IC802.

If OK. IC801 is faulty.

Yes

test mode "step 4"

test mode "step 5"

RFZI

RFRP

Check the periphery pins 28~32 of IC802.

If OK. IC802 failure.

Is the following wave output to the pin 55 (DMO) of IC802

when the CD TEST MODE "STEP 4" or "STEP 5"?

Yes

test mode "step 4"

test mode "step 5"

DMO

Normal.

• No sound.

Check the soldering and parts of IC14V.

Check the soldering and parts of IC11V.

Check the connection between IC11V and IC401.

Is the wave output at pins 45~48 on IC14V?

Yes

Is the wave output at pins 1 and 7 on IC11V?

Yes

Is the wave output at pins 14 and 17 on IC401?

Yes

Check areas between pins 5 and 26 on IC401 and IC601.

Download from Www.Somanuals.com. All Manuals Search And Download.

– 46 –

XL-3000V

• Track search failure

Does the sled motor run in FF/REW state when the SERVO

TEST MODE "STEP1" is set?

Check as stated in item "SLED MOTOR OPERATION FAILURE".

IC802 failure.

Yes

Is the following wave output to the pin 49 (TRO) of IC802

during track search in normal playback?

Yes

TRO

Check the PWB pattern between pin 49 (TRO) of IC802 and pin

19 of IC804.

Is the following wave output to the pins 12 (TEO) of IC801

during track search in normal playback?

Check the PWB pattern between pins 17 and 18 of IC804 and

Optical pickup.

If OK. Optical pickup failure.

Yes

TEO

TEI

TEZI

Check the PWB pattern between pin 12 (TEO) of IC801 and pins 46

and 47 of IC802. If OK. IC801 failure.

Is the above wave output to the pins 46 (TEI) and 47 (TEZI) of

IC802 during track search in normal playback?

Yes

Check the PWB pattern between pin 17 (RFO) and 18 (RFIS), 19

(RFRP) of IC801 and pins 41 and 42 of IC802. If OK. IC801 failure.

Is the following wave output to the pin 41 (RFZI) and 42

(RFRP) of IC802 during track search in normal playback?

Yes

RFRP

RFZI

Normal.

• Sled motor operation failure.

C802 is faulty.

Is following sled feed signal output the pin 53 (FMO) of IC802

when FF

MODE "STEP 1" is set?

/REW

key is pressed after the CD TEST

REW

Yes

FMO

Is following sled feed signal output the pins 3 and 4 of IC804

when FF /REW key is pressed after the CD TEST

MODE "STEP 1" is set?

Check the PWB pattern between pin 53 of IC802 and pins 3 and 4

of IC804.

REW

Yes

SL ±

Is sled feed signal output the pins 1 and 2 of IC804?

Yes

Check the peripheral parts of IC804. If OK, IC804 is faulty.

Check the CNW803/CNS803.

Is sled feed voltage applied between both terminals of sled

motor?

Yes

Check the CD mechanism (periphery of sled motor).

If the sled motor does not run when DC2.0V is applied to

both terminals of sled motor, the sled motor is faulty.

• Sled servo failure.

IC802 is faulty.

Is following sled signal output the pin 53 (FMO) of IC802

during playback?

Yes

FMO

Normal.

Download from Www.Somanuals.com. All Manuals Search And Download.

– 47 –

XL-3000V

FUNCTION TABLE OF IC

IC401 VHiLC75342M-1: Function/Volume Equalizer (LC75342M)

Pin No.

Port Name

Function

Serial data and clock input pin for control.

Chip enable pin. Data written into an internal latch in a timing of [H] -> [L]. Each analog switch is activated.

Data transfer enabled at [H] level.

VSS

TEST

LOUT

LBASS2

LBASS1

LTRE

LIN

Ground pin.

Electronic volume control pin. To be set to the VSS potential.

Volume + equalizer output pin.

Bass-band filter comprising capacitor and resistor connection pin.

Capacitor connection pin comprising treble band filter.

Volume + equalizer input pin.

12*

15*

16*

19*

27*

LSEL0

Input selector output pin.

Input signal pin.

No CONNECT pin. To be open or connected to VSS.

Input signal pin.

RSEL0

RIN

Input selector output pin.

Volume + equalizer input pin.

RTRE

RBASS1

RBASS2

ROUT

Capacitor connection pin comprising treble band filter.

Bass-band filter comprising capacitor and resistor connection pin.

Volume + equalizer output pin.

No CONNECT pin. To be open or connected to VSS.

Vref

0.5 x VDD voltage generation block for analog ground. Capacitor of several 10µF to be connected between

Vref and AWSS (VSS) as a counter measure against power ripple.

VDD

Supply pin.

Serial data and clock input pin for control.

In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside.

Download from Www.Somanuals.com. All Manuals Search And Download.

– 48 –

XL-3000V

IC401 VHiLC75342M-1: Function/Volume Equalizer (LC75342M)

TEST VSS CE DI CL VDD Vref

30 29 28

LOUT

26 ROUT

LBASS2

LBASS1

25 RBASS2

RBASS1

LTRE

RTRE

LIN

22 RIN

RSEL0

LSEL0

11 12 13 14 15 16 17 18 19 20

L4 L3 L2 L1 NC NC R1 R2 R3 R4

Figure 49 BLOCK DIAGRAM OF IC

Download from Www.Somanuals.com. All Manuals Search And Download.

– 49 –

XL-3000V

IC701 RH-iX0038SJZZ: System Microcomputer/FL driver (IX0038SJ) (1/2)

Input/Output

Output

—

Terminal Name

COM3-COM0

VLC3-VLC1

VDD

Function

Pin No.

1-4

5-7

LCD common output terminal.

LCD power supply terminal.

Input

Output

Input

—

Microcomputer power supply +5V.

OSC2

Oscillator ground terminal for main clock. f=8MHz

Microcomputer power supply GND.

OSC1

VSS

Input

Output

Input

—

Oscillator ground terminal for sub clock. f=32.768kHz

Memory mode selection terminal.

MMOD

VREF-

Power supply GND for AD converter.

KEY0 AN0/PA0

KEY1 AN0/PA1

KEY2 AN0/PA2

KEY3 AN0/PA3

KEY4 AN0/PA4

Input

CD lid status detection input.

Operation button input, Max-8 buttons.

MODEL/TUNER destination input.

Current detection of CD lid control motor.

Used to decide the CD lid drive error to control it.

22*

23*

33*

36*

41*

42*

48*

KEY5 AN0/PA5

KEY6 AN0/PA6

KEY7 AN7/PA7

VREF+

Input

Fan motor auto adjustment mode selection input.

Input

Tuner signal meter (S meter) voltage input terminal.

Power supply for A/D converter +5V.

Data output terminal to TUNER PLL IC.

Data input from TUNER PLL IC.

Input

TXD SBO0/P00

RXD SBI0/P01

SBT0/P02

Output

Input

Output

Input

Synchronous clock output with TUNER PLL IC.

VIDEO CD DECORDER DATA output.

VIDEO CD DECORDER DATA input.

VIDEO CD DECORDER CLOCK signal.

VIDEO CD DECORDER BUSY signal.

Reset signal input.

SBO1/P03

SBI1/P04

SBT1/P05

DK/BZER P06

RST/P27

RMOUT P10

P11

Input

CLOCK/TIMER/SLEEP button input.

Input

Tape run/END detection input.

TM2IO P12

TM3IO P13

TM4IO P14

IRQ0 P20

Output

Input

CD LID output signal.

Recording bias oscillation frequency selection control output.

Power (POWER) button input detection.

Switches to the HALT mode when changing to . "L" at power failure detection input.

Remote control signal input.

Input

SENS IRQ1/P21

IRQ2 P22

Input

VIDEO CD DECORDER STROBE signal.

IRQ3 P23

Input

IRQ4 P24

Input

P30

Output

Input

SURROUND control output.

P31

POWER IC STAND-BY terminal CONTROL.

P32

Power mute output. "H" = MUTE ON "L" = MUTE OFF

CD servo power supply circuit control output. "H" = CD power ON "L" = CD power OFF

Main TRANS RELAY CONTROL. "H" = ON "L" = OFF

Data input from RDS IC.

LED0 WE/P50

LED1 RE/P51

LED2 CS/P52

LDE3/S51 A16/P53

LED4/S50 A17/P54

SEG49 P60/A0

SEG48 P61/A1

SEG47 P62/A2

Input

Radio stereo broadcast reception detection input. "L" = During stereo broadcast reception

Broadcast reception status detection input. "L" = During broadcasting signal reception

LCD backlight control signal output. "H" = Backlight ON, "L" = Backlight OFF

Amp. signal detection.

Input

Output

LED illumination control. "H" = ON "L" = OFF

In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside.

Download from Www.Somanuals.com. All Manuals Search And Download.

– 50 –

XL-3000V

IC701 RH-iX0038SJZZ: System Microcomputer/FL driver (IX0038SJ) (2/2)

Input/Output

Pin No. Terminal Name

Function

SEG46 P63/A3

SEG45 P64/A4

SEG44 P65/A5

SEG43 P66/A6

SEG42 P67/A7

SEG41 P70/A8

SEG40 P71/A9

Output

Input

LED dimmer signal.

Fan control signal.

Electric CD lid OPEN.

Electric CD lid CLOSE.

58*

59*

Output

ON/OFF output terminal of CD servo control IC. "H" = Servo ON "L" = Servo stand-by

61*-64*

SEG39 P72/A10- Input/Output Data input/output terminal control.

SEG36 P75/A13

65*

66*

SEG35 P76/A14

SEG34 P77/A15

SEG33 P87/D7

SEG32 P86/D6

Output

Data synchronous clock output.

Chip enable terminal. "L" = BUS terminal active

LCD segment output.

69-74

SEG31 P85/D5-

SEG26 P80/D0

LCD segment output.

75-100

SEG25-SEG0

Output

LCD segment output.

IC701 RH-iX0038SJZZ: System Microcomputer/FL driver (IX0038SJ)

I/O

SEG25

SEG26

SEG27

SEG28

SEG29

SEG30

SEG31

SEG32

SEG33

COM3

COM2

COM1

COM0

VLC3

VLC2

VLC1

VDD

OSC2

OSC1

VSS

MMOD

VREF–

CLID_SW

KEY1

KEY2

MODEL

CLID_PRO

MOT_DEC

CD_STB

CD_RES

PU-IN

CLID_DW

CLID_UP

FAN

DIMMER

LIGHT

AMP_DEC

B-LIGHT

VREF+

Figure 51 BLOCK DIAGRAM OF IC

Download from Www.Somanuals.com. All Manuals Search And Download.

– 51 –

XL-3000V

IC801 VHiTA2109F/-1:Servo Pre Amp. (TA2109F)

Pin No.

Input/Output

Function

Terminal Name

VCC

—

Power voltage terminal

FNI

FPI

Input

Output

Input

Main beam amp input terminal

Sub-beam amp input terminal

TPI

TNI

MDI

LDO

SEL

TEB

Monitor photodiode amp input terminal

Laser diode amp output terminal

Laser diode control signal input and APC circuit ON/OFF signal input terminal

Tracking error balance adjustment signal input terminal

To be controlled by 3-value PWM signal. (PWM carrier = 88.2 kHz)

2VRO

TEN

Output

Input

Standard voltage (2VR) output terminal. When Vcc = 5V, 2VR = 4.2V.

Tracking error signal generation amp reversed phase input terminal

Tracking error signal generation amp output terminal

Sub-beam addition signal output terminal

TEO

Output

Input

SBAD

FEO

Focus error signal generation amp output terminal

Focus error signal generation amp reversed phase input terminal

Standard voltage (VR) output terminal. When Vcc = 5V, VR = 2.1V.

Track count signal generation amp output terminal

RFRP detection circuit input terminal

FEN

VRO

Output

Input

RFRP

RFIS

RFGO

RFGC

Output

Input

RF signal output terminal

RF amplitude adjustment control signal input terminal

The amplitude of RF signal can be controlled by using the 3-value PWM signal (PWM

carrier = 88.2 kHz) which is output from the RFGC terminal of TC9432F.

AGCI

RFO

GND

RFN

Input

Output

—

RF signal amplitude adjustment amp input terminal

RF signal generation amp output terminal

GND terminal

Input

RF reversed phase input terminal

IC801 VHiTA2109F/-1:Servo Pre Amp. (TA2109F)

15kΩ

30kΩ

LDC

SW2

7.67kΩ

SEL

10kΩ

15kΩ

SW1

SW3

10kΩ

SBAD

FEO

TEO

TEN

2VRO

TEB

SEL

LDO

MDI

TNI

HiZ

ON OFF OFF

20µA

50kΩ

OFF

20pF

10kΩ

36pF

21kΩ

29kΩ

7.96kΩ

FEN

10kΩ

24kΩ

VRO

3 STATE

DET.

21kΩ

50µA

20kΩ

SW1

LDC

1kΩ

RFRP

RFIS

RFGO

RFGC

AGCI

RFO

47kΩ

12kΩ

1.74kΩ

12kΩ

SW2

65µA

20kΩ

680kΩ

SW3

PEAK

BOTTOM

180kΩ

20pF

13kΩ

2.12kΩ

I . I

180kΩ

12kΩ

20pF

23.5kΩ

TPI

re = 130Ω

20kΩ

180kΩ

40pF

FPI

20kΩ

60kΩ

20kΩ

60kΩ

GND

RFN

FNI

1.53kΩ

20kΩ

VCC

Figure 52 BLOCK DIAGRAM OF IC

Download from Www.Somanuals.com. All Manuals Search And Download.

– 52 –

XL-3000V

IC802 VHiTC9462F/-1: Servo/Signal Control (TC9462F) (1/3)

Function

Port Name

Input/Output

Pin No.

TEST0

Input

Test mode terminal. To be opened usually.

Playback speed mode flag output terminal.

/HSO

/UHSO

Output

/UHSO

Playback speed

x1 speed playback

x2 speed playback

x4 speed playback

—

/HSO

EMPH

LRCK

Output

Sub-code Q data emphasis flag output terminal. "H": Emphasis ON "L": Emphasis OFF

The output polarity can be inverted by command.

Channel clock (44.1 kHz) output terminal. "L": L channel "H": R channel

The output polarity can be inverted by command.

VSS

—

Digital ground terminal.

BCK

Output

Bit clock (1.4122 MHz) output terminal.

Audio data output terminal.

AOUT

DOUT

MBOV

IPF

Digital out output terminal.

10*

11*

Buffer memory over signal output terminal. "H": Over

Correction flag output terminal.

"H": When AOUT output is correction-disabled symbol in case of C2 correction output.

12*

13*

SBOK

CLCK

VDD

Output

Sub-code Q data CRCC judgment result output terminal. "H": When judgment result is OK.

Input/Output Sub-code P-W data read clock output/input terminal. Selectable with command bit.

Input

—

Digital + power terminal.

VSS

Digital ground terminal.

16*

17*

18*

19*

20*

21*

22*

DATA

SFSY

SBSY

SPCK

SPDA

COFS

MONIT

Output

Sub-code P-W data output terminal.

Playback system frame sync signal output terminal.

Sub-code block sync output terminal. "H": On S1 position when the sub-code sync is detected.

Processor status signal read clock (176.4 kHz) output terminal.

Processor status signal output terminal.

Correction system frame clock (7.35 kHz) output terminal.

LSI internal signal monitor terminal.

It is possible to monitor the DSP internal flag and PLL system clock with the microcomputer

command. Terminal for serial output of text data according to command.

VDD

Input

Digital + power terminal.

TESIO0

Test input/output terminal. To be fixed to "L" usually.

Terminal to input the text data read clock according to command.

P2VREF

HSSW

ZDET

—

2VREF terminal for PLL system.

26*

27*

Output

VREF voltage in case of x2 speed/x4 speed.

1-bit DAC zero detection flag output terminal.

PDO

Terminal to output the phase difference between EFM signal and PLCK signal.

TMAX detection result output terminal. To be selected with command bit TMPS.

29*

TMAXS

TMAX

TMAX detection result

Longer than specific period

Shorter than specific period

Within specific period

TMAX output

"P2VREF"

"VSS"

"HIZ"

LPFN

LPFO

PVREF

VCOREF

VCOF

AVSS

SLCO

RFI

Input

Output

Input

Output

—

Low-pass filter amp inverted input terminal.

Low-pass filter amp output terminal.

VREF terminal for PLL system.

VCO center frequency standard level terminal. To be fixed to PVref usually.

VCO filter terminal.

Analog system ground terminal.

Output

Input

Data slice level generation DAC output terminal.

RF signal input terminal.

In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside.

Download from Www.Somanuals.com. All Manuals Search And Download.

– 53 –

XL-3000V

IC802 VHiTC9462F/-1: Servo/Signal Control (TC9462F) (2/3)

Function

Input/Output

Port Name

Pin No.

AVDD

RFCT

RFZI

RFIP

FEI

Input

Output

Input

Output

Analog system power terminal.

RFRP signal center level input terminal.

RFRP zero cross input terminal.

RF ripple signal input terminal.

Focus error signal input terminal.

SBAD

TSIN

TEI

Sub-beam addition signal input terminal.

Test input terminal. To be fixed to Vref usually.

Tacking error input terminal. (Tracking servo ON: Taking-in).

Tracking error, zero cross input terminal.

Focus equalizer output terminal.

TEZI

FOO

TRO

VREF

RFGC

Tracking equalizer output terminal.

Analog standard power terminal.

RF amplitude adjustment control signal output terminal.

3-value PWM signal is output. (PWM carrier = 88.2 kHz)

TEBC

Output

Tracking balance control signal output terminal.

3-value PWM signal is output. (PWM carrier = 88.2 kHz)

FMO

FVO

Output

Feed equalizer output terminal. 3-value PWM signal is output. (PWM carrier = 88.2 kHz)

54*

Speed error signal or feed search EQ output terminal.

3-value PWM signal is output. (PWM carrier = 88.2 kHz)

DMO

Output

Disc equalizer output terminal.

3-value PWM signal is output. (PWM carrier = DSP system 88.2 kHz, sync with PXO)

2VREF

SEL

Input

Analog standard power terminal (2xVREF)

Output

APC circuit ON/OFF signal output terminal.

When laser is ON and UHS = L, "Hi-Z". When UHS = H, "H" output is obtained.

58*

59*

60*

61*

FLGA

FLGB

FLGC

FLGD

Output

Internal signal monitor external flag output terminal.

TEZC, FOON, FOK and RFZC signals can be selected with command.

Internal signal monitor external flag output terminal.

DFCT, FOON, FMON and RFZC signals can be selected with command.

Internal signal monitor external flag output terminal.

TRON, TRSR, FOK, and SRCH signals can be selected with command.

Internal signal monitor external flag output terminal.

TRON, DMON, HYS and SHC signals can be selected with command.

VDD

VSS

Input

—

Digital + power terminal.

Digital ground terminal.

64*

65*

66*

67*

IO0

IO1

IO2

IO3

Input/Output General-use I/O port.

The input port and output port can be selected with command. In case of input port the terminal

state (H/L) can be read with the read command.

In case of output port the terminal state (H/L/HiZ) can be controlled with command.

68*

/DMOUT

Input

Terminal to set the mode to output 2-value PWM of feed equalizer from IO0,1 terminal and 2-

value PWM of disc equalizer from IO2,3 terminal. "L" active

69*

70*

/CKSE

/DACT

TESIN

TESIO1

VSS

Input

—

To be opened usually.

DAC test mode terminal. To be opened usually.

Test input terminal (externally provided VCO clock input terminal). To be fixed to "L" usually.

Test input/output terminal. To be fixed to "L" usually.

Digital ground terminal.

PXI

Input

Output

Input

—

DSP system clock oscillation circuit input terminal. To be fixed to "L" usually.

DSP system clock oscillation circuit output terminal.

Digital + power terminal.

75*

PXO

VDD

XVSS

System clock oscillation circuit ground terminal.

System clock oscillation input terminal.

Input

Output

Input

Output

System clock oscillation circuit output terminal.

System clock oscillation circuit + power terminal.

R channel D/A converting section power terminal.

R channel data forward rotation output terminal.

XVDD

DVSR

82*

In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside.

Download from Www.Somanuals.com. All Manuals Search And Download.

– 54 –

XL-3000V

IC802 VHiTC9462F/-1: Servo/Signal Control (TC9462F) (3/3)

Function

Input/Output

Port Name

Pin No.

DVDD

DVR

Input

Output

Input

D/A converting section power terminal.

Reference voltage terminal.

85*

L channel data forward rotation output terminal.

L channel D/A converting section power terminal.

Test mode terminal. To be opened usually.

DVSL

TEST1

TEST2

TEST3

BUS0-BUS3

VDD

87*

88*

89*

90-93

Input/Output Microcomputer interface data input/output terminal.

Input

—

Digital + power terminal.

VSS

Digital ground terminal.

BUCK

/CCE

Input

Microcomputer interface clock input terminal.

Microcomputer interface chip enable signal input terminal. "L": BUS0 to 3 is active.

Test mode terminal. To be opened usually.

98*

99*

100

TEST4

/TSMOD

/RST

Local test mode selection terminal.

Reset signal input terminal. "L": Reset.

In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside.

IC802 VHiTC9462F/-1: Servo/Signal Control (TC9462F)

PLL

LPFN

/RST

TMAX

Sub-code

Digital

Status

Audio output

circuit

LPFO

PVREF

VCOREF

VCOF

AVSS

SLCO

RFI

demodulation

circuit

/TSMOD

TEST4

/CCE

BUCK

VSS

out

VCO

16KRAM

VDD

Data

slicer

BUS3

BUS2

BUS1

BUS0

TEST3

TEST2

TEST1

DVSL

CLV

servo

Correction

circuit

AVDD

RFCT

RFZI

Address

circuit

RFRP

FEI

Digital equalizer

adjustment circuit

A/D

SBAD

TSIN

TEI

TEZI

Clock

generator

DVR

FOO

1Bit

DAC

DVDD

Servo control

D/A

PWM

TRO

VREF

DVSR

Figure 55 BLOCK DIAGRAM OF IC

Download from Www.Somanuals.com. All Manuals Search And Download.

– 55 –

XL-3000V

IC804 VHiMM1469XH-1: Focus/Tracking/Spin/Sled Driver (MM1469XH)

Pin No.

Port Name

Function

CH1-OUT-A

CH1-OUT-B

CH1-IN-A

CH1-IN-B

Tr-B

Driver CH1 negative output

Driver CH1 positive output

Driver CH1 input

Driver CH1 input, gain adjustment pin

Connect to external transistor base

VREG-OUT

MUTE

Constant voltage output, connects to external transistor collector

Driver mute control input

GND

CH2-IN-B

CH2-IN-A

CH2-OUT-B

CH2-OUT-A

Driver CH2 input, gain adjustment pin

Driver CH2 input

14*

15*

16*

20*

Driver CH2 positive output

Driver CH2 negative output

Substrate GND Substrate GND

OP-OUT

OP-IN(–)

OP-IN(+)

CH3-OUT-A

CH3-OUT-B

CH3-IN-A

CH3-IN-B

Vcc

Operational amplifier output

Operational amplifier input, negative

Operational amplifier input, positive

Driver CH3 negative output

Driver CH3 positive output

Driver CH3 input

Driver CH3 input, gain adjustment pin

Vcc

BIAS-IN

Bias amplifier input

CH4-IN-B

CH4-IN-A

CH4-OUT-B

CH4-OUT-A

Driver CH4 input, gain adjustment pin

Driver CH4 input

Driver CH4 positive output

Driver CH4 negative output

Substrate GND Substrate GND

In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside.

GND (lowest potential) is connected to the frame of pin center.

T.S.D : Thermal Shut Down

D.BUF : Driver Buffer

D.BUF D.BUF

VCC

10kΩ

VCC

50kΩ

T.S.D

10kΩ

DRIVER MUTE

50kΩ

10kΩ

D.BUF D.BUF

Figure 56 BLOCK DIAGRAM OF IC

Download from Www.Somanuals.com. All Manuals Search And Download.

– 56 –

XL-3000V

IC14V VHiES3883F/-1: Video CD Encoder (ES3883F) (1/2)

Pin No.

Terminal Name

Input/Output

Function

VSS

Input

—

Ground.

2*-4*

No connect. Do not connect to these pins.

Voltage supply, 5V.

VCC

Input

DSC_CLK

AUX0

Input

Clock for programming to access internal registers.

Servo Forward Control pin.

Input/Output

Input

DSC_D0

AUX1

Data for programming to access internal registers.

Servo Reverse Control pin.

12*

DSC_STB

AUX2

Strobe for programming to access internal registers.

Servo LDON or Control pin.

Input/Output

Output

DCLK/EXT_CLK

Dual-purpose pin. DCLK is the MPEG decoder clock.

Input

EXT_CLK is the extemal clock. EXT_CLK is an input during bypass PLL mode.

Video reset (active low).

15*

RESET_B

AUX07

Input

Input/Output

Output

Servo BRKM/Sense or Control pin/VFD_DI.

Audio mute.

MUTE

VCC

Input

Voltage supply, 5V.

MCLK

Input

Audio master clock.

AUX8

Input/Output

Input

Servo Mute/Open or Control pin/VFD_CLK.

Dual-purpose pin. TWS is the transmit audio frame sync.

SPLL_OUT is the select PLL output.

Servo SQS0 or Control pin.

TWS/SPLL_OUT

Output

20*

AUX09

Input/Output

Input

TSD

Transmit audio data input.

TBCK

Input

Transmit audio bit clock.

RWS/SEL_PLL1

Output

Dual-purpose pin. RWS is the receive audio frame sync.

Input

Pins SEL_PLL [1:0] select the PLL clock frequency for DCLK output.

SEL_PLL1 SEL_PLL0 DCLK

Bypass PLL (Input Mode)

27MHz (Output Mode)

32.4MHz (Output Mode)

40.5MHz (Output Mode)

RSTOUT_B

VSS

Output

Input

—

Reset output (active low).

Ground.

25, 26

27*

NC (SQCK)

NC (SQSO)

No connect. Do not connect to these pins.

Ground.

28*

—

29*, 30* NC

—

VSS

Input

Output

Input

VCC

Voltage supply, 5V.

RSD/SEL_PLL0

Dual-purpose pin. RSD is the receive audio data input.

SEL_PLL0 along with SEL_PLL1 select the PLL clock frequency for the DCLK output.

See the table for pin number 23.

36*

AUX10

Input/Output

Output

Servo SQCK or Control pin.

AUX11

3880 IRQ or Interrupt Output or Control pin.

CD C2PO or Interrupt or Control pins.

Dual purpose pin. RBCK is the receive audio bit clock.

AUX12

RBCK/SER_IN

Input

SER_IN is serial input DSC mode.

0 = Parallel DSC mode.

1 = Serial DSC mode.

AUX13

AUX14

AUX15

VSSA

VCM

Input/Output

Input

Serial Interrupt/CD-Mute or Control pin.

Servo SCOR(S0S1) or Interrupt Input or Control pin.

Interrupt Input or Control pin.

Audio Analog ground.

Input

ADC Common Mode Reference (CMR) buffer output. CMR is approximately 2.25V.

Bypass to analog ground with 47 µF electrolytic in parallel with 0.1 µF.

VREFP

VCCAA

Input

DAC and ADC maximum reference. Bypass to VCMR with 10 µF in parallel with 0.1 µF.

Analog VCC, 5V.

In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside.

Download from Www.Somanuals.com. All Manuals Search And Download.

– 57 –

XL-3000V

IC14V VHiES3883F/-1: Video CD Encoder (ES3883F) (2/2)

Pin No.

Terminal Name

Input/Output

Function

49*

50*

AOR +

AOR -

AOL -

AOL +

MIC1

Output

Input

Right channel output.

Left channel output.

Microphone input 1.

Microphone input 2.

Audio Analog ground.

MIC2

Input

VSSAA

VREF

Input

Internal resistor divider generates Common Mode Reference (CMR) voltage.

Bypass to analog ground with 0.1 µF.

VREFM

RSET

Input

DAC and ADC minimum reference. Bypass to VCMR with 10 µF in parallel with 0.1 µF.

Full scale DAC current adjustment.

Compensation pin.

COMP

VSSAV

CDAC

VCCAV

YDAC

VSSAV

VDAC

ACAP

VCC

Input

56, 57

58*

59, 60

61*

62, 63

Input

Video Analog ground.

Output

Modulated chrominance output.

Video VCC, 5V.

Input

Output

Y luminance data bus for screen video port.

Video Analog ground.

Input

Output

Composite video output.

Input

Audio CAP.

Input

Voltage supply, 5V.

67*

68*

AUX6

Input/Output

Output

Servo XLAT or Control pin/VFD_DO.

Servo Data or Control pin.

AUX5

AUX4

Servo CCW/Close or Control pin.

Servo CW/Limit or Control pin.

Crystal output.

AUX3

XOUT

VSS

Input

Ground.

VCC

Input

Voltage supply, 5V.

XIN

Input

27 MHz crystal input.

VSS

Input

Ground.

76*

—

No connect. Do not connect to these pins.

Ground.

VSS

Input

VCC

Input

Voltage supply, 5V.

PCLK

Input/Output

Output

13.5 MHz pixel clock.

2XPCLK

DSC_D7

HSYN_B

DSC_D6

VSYN_B

DSC_D5

YUV7-YUV4

VCC

27 MHz (2 times pixel clock).

Data for programming to access internal registers.

Horizontal sync (active low).

Data for programming to access internal registers.

Vertical sync (active low).

Input/Output

Output

Input/Output

Input

Data for programming to access internal registers.

YUV data bus for screen video port.

Voltage supply. 5V.

86-89

Input

VSS

Input

Ground.

YUV3

Input

YUV data bus for screen video port.

Data for programming to access internal registers.

YUV data bus for screen video port.

Data for programming to access internal registers.

YUV data bus for screen video port.

Data for programming to access internal registers.

YUV data bus for screen video port.

Data for programming to access internal registers.

Ground.

DSC_D4

YUV2

Input/Output

Input

DSC_D3

YUV1

Input/Output

Input

DSC_D2

YUV0

Input/Output

Input

DSC_D1

VSS

Input/Output

Input

100

In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside.

Download from Www.Somanuals.com. All Manuals Search And Download.

– 58 –

XL-3000V

ICV14 VHiES3883F/-1 :Video CD Encoder (ES3883F)

50 MIC2

49 MIC1

100

DSC_D7

HSYN_B

DSC_D6

VSYN_B

DSC_D5

YUV7

YUV6

YUV5

YUV4

VCC

VSS

YUV3

DSC_D4

YUV2

DSC_D3

YUV1

DSC_D2

YUV0

DSC_D1

VSS

48 AOL +

47 AOL -

46 AOR -

45 AOR +

44 VCCAA

43 VREFP

42 VCM

IC14V

ES3883F

41 VSSAA

40 AUX15/IR

39 AUX14/SOS1

38 AUX13/SP

37 RBCK/SER_IN

36 AUX12/C2PO

35 AUX11/RQ

34 AUX10/SQCK

33 RSD/SEL_PLL0

32 VCC

31 VSS

Figure 59-1 BLOCK DIAGRAM OF IC

IC16V RH-iX0025SJZZ: D-RAM 256Kx16 (IX0025SJ)

Pin No.

Port Name

VCC

Function

Vcc

DQ1

DQ2

DQ3

DQ4

Vcc

Power (5V)

39 DQ16

38 DQ15

2-5

DQ1-DQ4

VCC

Data input/data output

Power (5V)

DQ14

DQ13

Vss

7-10

DQ5-DQ8

Data input/data output

Not used

11*,12* NC

Write enable

RAS

Low address strobe

Not used

DQ5

DQ6

DQ7

DQ8

DQ12

15*

16-19

33 DQ11

A0-A3

VCC

Address input

DQ10

DQ9

Power (5V)

VSS

Ground

22-26

A4-A8

Address input

Output enable

Upper column address strobe

Lower column address strobe

Not used

NC 12

WE 13

29 LCAS

28 UCAS

UCAS

LCAS

RAS

NC 15

26 A8

30*

31-34

DQ9-DQ12

VSS

Data input/data output

Ground

A1 17

A2 18

24 A6

23 A5

36-39

DQ13-DQ16

VSS

Data input/data output

Ground

In this unit, the terminal with asterisk mark (*) is (open)

terminal which is not connected to the outside.

Vcc

Vss

Figure 59-2 BLOCK DIAGRAM OF IC

Download from Www.Somanuals.com. All Manuals Search And Download.

– 59 –

XL-3000V

IC15V VHiES3880F/-1: Video CD Decoder (ES3880F)

Pin No.

Terminal Name

Input/Output

Function

VDD

Input

Output

Input/Output

Input

Voltage supply for 3.3V.

RAS#

DRAM row address strobe (active low).

DRAM write enable (active low).

DWE#

4-12

13-28

DA0-DA8

DBUS0-DBUS15

RESET#

VSS

DRAM multiplaxed row and column address bus.

DRAM data bus.

Ayatem reset (active low).

Ground.

Input

VDD

Input

Voltage supply for 3.3V.

32-39

YUV0-YUV7

Output

Y is luminance, UV are chrominance data bus for screen video interface.

YUV0-YUV7 for 8-bit YUV mode.

42*

VSYNC

HSYNC

CPUCLK

PCLK2X

PCLK

Input/Output

Input

Vertival sync for screen video interface, programmable for rising or falling edge.

Horizontal sync for screen video interface, programmable for rising or falling edge.

RISC and system clock input. CPUCLK is used only if SEL_PLL0, SEL_PLL1=00.

Pixel clock; two times the actual pixel clock for screen video interface.

Pixel clock qualifier in for screen video interface.

Auxiliary control pins (AUX0 and AUX1 are open collectors).

Ground.

Input/Output

Input

45,46*-49 AUX0-AUX4

VSS

VDD

Input

Voltage supply for 3.3V.

52-54

55-62

63*

AUX5-AUX7

LD0-LD7

LWR#

Input/Output

Output

Auxiliary control pins.

RISC interface data bus.

RISC interface write enable (active low).

RISC interface output enable (active low).

RISC interface chip enable (active low).

RISC interface address bus.

LOE#

Output

LCS3#

Output

66,67*

68-79

LCS1#, LCS0#

LA0-LA11

VSS

Output

Input

Ground.

VCC

Input

Digital supply voltage for 5V.

82-87

LA12-LA17

ACLK

Output

RISC interface address bus.

Input/Output

Master clock for external audio DAC (8.192 MHz, 11.2896 MHz, 12.288 MHz, 16.9344

MHz and 18.432 MHz).

AOUT/SEL_PLL0

Output

Input

Dual-purpose pin. AOUT is the audio interface serial data output.

Pins SEL_PLL0, SEL_PLL1 select phase-lock loop (PLL) clock frequency CPUCLK for the

Visba:

00 = bypass PLL.

01 = 54 MHz PLL.

10 = 67.5 MHz PLL.

11 = 81 MHz PLL.

ATCLK

Input/Output

Output

Audio transmit bit clock.

ATFS/SEL_PLL1

Dual-purpose pin. ATFS is the audio interface transmit frame sync.

Input

Pins SEL_PLL0, SEL_PLL1 select phase-lock loop (PLL) clock frequency CPUCLK for the

Viaba.

See the SEL_PLL0 pin above for the settings.

DA9/DOE#

Output

Dual purpose pin: DRAM output enable (active low)/DRAM multiplexed row column

address bus.

100

AIN

Input

Output

Input

Audio interface serial data input.

Audio receive bit clock.

ARCLK

ARFS

TDMCLK

TDMDR

TDMFS

CAS#

Audio interface receive frame sync.

TDM interface serial clock.

TDM interface serial data receive.

TDM interface frame sync.

DRAM column address strobe bank 0 (active low).

Ground.

VSS

In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside.

Download from Www.Somanuals.com. All Manuals Search And Download.

– 60 –

XL-3000V

IC15V VHiES3880F/-1: Video CD Decoder (ES3880F)

80 79 78 77 76 75 74 73 72 71 70 69 68 67 6665 64 63 62 6160 59 58 57 5655 54 53 52 51

VCC

LA12

LA13

LA14

LA15

VSS

AUX4

AUX3

AUX2

AUX1

AUX0

PCLK

PCLK2X

CPUCLK

HSYNC

VSYNC

YUV7

YUV6

YUV5

YUV4

YUV3

YUV2

YUV1

YUV0

VDD

LA16

LA17

ACLK

AOUT/SEL_PLL0

ATCLK

ATFS/SEL_PLL1

DA9/DOE#

AIN

ES3880F

ARCLK

ARFS

TDMCLK

TDMDR

TDMFS

CAS#

VSS

100

1 2 3 4 5 6 7 8 9 10 11 12 13 14 1516 17 18 19 2021 22 23 24 2526 27 28 29 30

Figure 61 BLOCK DIAGRAM OF IC

Download from Www.Somanuals.com. All Manuals Search And Download.

– 61 –

XL-3000V

LCD701: RV-LX0012SJZZ LCD Display

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42

PinNo com1 com2 com3 com4

com1

com2

com3

com4

RDS

REC

SLEEP b3

MHz

PTY

EON

RANDOM b4

kHz

SRS(0)

com4

com3

com2

MEMORY

com1

Figure 62 LCD SEGMENT

Download from Www.Somanuals.com. All Manuals Search And Download.

– 62 –

XL-3000V

PARTS GUIDE

VIDEO CD COMPACT AUDIO SYSTEM

MODEL XL-3000V

XL-3000V Video CD Compact Audio System consisting of XL-

3000V (main unit) and CP-XL3000U (speaker system).

“HOW TO ORDER REPLACEMENT PARTS”

To have your order filled promptly and correctly, please furnish the

For U.S.A. only

Contact your nearest SHARP Parts Distributor to order.

following information.

1. MODEL NUMBER

3. PART NO.

2. REF. No.

4. DESCRIPTION

For location of SHARP Parts Distributor,

Please call Toll-Free;

1-800-BE-SHARP

MARK: SPARE PARTS-DELIVERY SECTION

Explanation of capacitors/resistors parts codes

Capacitors

VCC ....................... Ceramic type

Resistors

VRD ....................... Carbon-film type

VCK........................ Ceramic type

VRS........................ Carbon-film type

VCT ........................ Semiconductor type

VRN ....................... Metal-film type

VC • • MF ............... Cylindrical type (without lead wire)

VC • • MN............... Cylindrical type (without lead wire)

VC • • TV................ Square type (without lead wire)

VC • • TQ ............... Square type (without lead wire)

VC • • CY ............... Square type (without lead wire)

VC • • CZ ............... Square type (without lead wire)

VC • • • • • • • • • J .. The 13th character represents capacity difference.

("J" ±5%, "K" ±10%, "M" ±20%, "N" ±30%,

"C" ±0.25 pF, "D" ±0.5 pF, "Z" +80-20%.)

VR • • MF ............... Cylindrical type (without lead wire)

VR • • MN............... Cylindrical type (without lead wire)

VR • • TV................ Square type (without lead wire)

VR • • TQ ............... Square type (without lead wire)

VR • • CY ............... Square type (without lead wire)

VR • • CZ ............... Square type (without lead wire)

VR • • • • • • • • • J .. The 13th character represents error.

("J" ±5%, "F" ±1%, "D" ±0.5%.)

If there are no indications for other parts, the resistors are ±5%

If there are no indications for the electrolytic capacitors, error is ±20%.

carbon-film type.

NOTE:

Parts marked with “

” are important for maintaining the safety of the set.

Be sure to replace parts with specified ones for maintaining the safety and performance of the set.

Download from Www.Somanuals.com. All Manuals Search And Download.

XL-3000V

PRICE

RANK

PRICE

RANK

NO.

DESCRIPTION

NO.

PARTS CODE

DESCRIPTION

PARTS CODE

D801

VHPDB5306X+-1

VHD1N4004//-1

VHEDZ5R1BSB-1

VHEDZ130BSA-1

VHEMTZJ9R1C-1

VHEMTZJ160C-1

VHEDZ3R3BSB-1

VHEDZ240BSD-1

VHEDZ5R6BSB-1

AR LED,DB5306X

AB Silicon,1N4004

AC Zener,5.1V,DZ5.1BSB

AC Zener,13V,DZ13BSA

AB Zener,9.1V,MTZJ9.1C

AB Zener,16V,MTZJ16C

AB Zener,3.3V,DZ3.3BSB

AB Zener,24V,DZ24BSD

AC Zener,5.6V,DZ5.6BSB

INTEGRATED CIRCUITS

D802~805

D901,902

ZD351

ZD601

ZD602

ZD683,684

ZD701

ZD901

IC10V

IC11V

IC14V

IC15V

IC16V

IC201

IC301

IC302

IC303

RH-IX0041SJZZ

VHINJM4565M-1

VHIES3883F/-1

VHIES3880F/-1

RH-IX0025SJZZ

VHIKIA4558P-1

VHITA7358AP-1

VHILC72131/-1

VHILA1832S/-1

ROM 256×16,IX0041SJ

AC Buffer Amp.,NJM4565M

BA Video CD Encoder,ES3883F

BB Video CD Decoder,ES3880F

AW D-RAM 256K×16,IX0025SJ

AC Surround Control,KIA4558P

AG FM Front End,TA7358AP

AP PLL (Tuner),LC72131

AN FM IF Det./FM Mpx./AM IF,

LA1832S

ZD902

FILTERS

IC401

VHILC75342M-1

AN Function/Volume Equalizer,

LC75342M

AW Power AMP.,STK40202

AF Voltage Regulator,KIA7805API

System Microcomputer/FL Driver,

IX0038SJ

BF301

CF302,303

CF351

RFILR0008AWZZ

RFILF0004SJZZ

RFILF0003AWZZ

RFILA0003SJZZ

AE Band Pass Filter

AG FM RF,10.7 MHz

AK FM IF

IC601

IC681,682

IC701

VHISTK40202-1

VHIKIA7805API

RH-IX0038SJZZ

CF352

AF AM IF

TRANSFORMERS

IC801

IC802

IC804

VHITA2109F/-1

VHITC9462F/-1

VHIMM1469XH-1

AL Servo Pre Amp.,TA2109F

AZ Servo/Signal Control,TC9462F

AN Focus/Tracking/Spin/Sled Driver,

MM1469XH

T302

T304

RCILA0007SJZZ

AG AM Tracking

AF FM IF

AG AM Band Coverage

AF AM IF

Power Transformer (Main)

AM Power Transformer (Sub)

RCILI0005SJZZ

RCILB0009SJZZ

RCILI0004SJZZ

RTRNP0068SJZZ

RTRNP0061SJZZ

T306

T351

IC805

VHITA7291S/-1

AH CD Lid Motor Driver,TA7291S

1 T651

1 T681

TRANSISTORS

Q11V

Q12V

Q101

Q102

Q103,104

Q201

Q203

Q302

Q306

Q351

Q360

Q601,602

Q603

Q604,605

Q606

1 Q607

Q608

Q609

1 Q610

Q681

Q683

VS2SD1858R2-1

AC Silicon,NPN,2SD1858 R2

AB Silicon,NPN,2SC1740 SR

AC Silicon,NPN,KTC3200 GR

AC Silicon,PNP,KTA1268 GR

AC Silicon,NPN,KTC3200 GR

AB FET,2SK246 GR

COILS

VS2SC1740SR-1

VSKTC3200GR-1

VSKTA1268GR-1

VSKTC3200GR-1

VS2SK246GR/-1

VSKRC107M//-1

VS2SC535-C/-1

VSKRC104M//-1

VSKTA1266GR-1

VSKTC3199GR-1

VSKTC3200GR-1

VS2SD2012Y/-1

VSKTC3200GR-1

VS2SD2012Y/-1

VSKRA102M//-1

VSKRC107M//-1

VS2SD2012Y/-1

VSKTC3199GR-1

VSKRC102M//-1

VSKTC3199GR-1

VSKRC102M//-1

VSKTA1266GR-1

VSKRC102M//-1

VSKTA1266GR-1

VSKRC102M//-1

VSKTC3199GR-1

VSKTA1266GR-1

VS2SC535-C/-1

VSKTC3200GR-1

VS2SB562-C/-1

VSKRC102M//-1

VSKTA1266GR-1

VSKTC3199GR-1

VSKTC3200GR-1

VSKTA1266GR-1

VSKRC102M//-1

L11V

L103V,104V

L302

L303

L351,352

L353

L401

L402

L601,602

L603

L702

VP-XF100K0000

VP-XF3R3K0000

RCILR0003SJZZ

RCILB0010SJZZ

VP-DH101K0000

VP-DH102K0000

VP-DH2R2K0000

VP-DHR82K0000

RCILZ0024AWZZ

VP-DH100K0000

VP-DH2R2K0000

VP-DH100K0000

VP-XHR82K0000

VP-DH100K0000

AB 10 µH,Choke

AB 3.3 µH,Choke

AD FM RF

AG FM OSC.

AC Digital,NPN,KRC107 M

AC Silicon,NPN,2SC535 C

AC Digital,NPN,KRC104 M

AB Silicon,PNP,KTA1266 GR

AB Silicon,NPN,KTC3199 GR

AC Silicon,NPN,KTC3200 GR

AF Silicon,NPN,2SD2012 Y

AC Silicon,NPN,KTC3200 GR

AF Silicon,NPN,2SD2012 Y

AC Digital,PNP,KRA102 M

AC Digital,NPN,KRC107 M

AF Silicon,NPN,2SD2012 Y

AB Silicon,NPN,KTC3199 GR

AC Digital,NPN,KRC102 M

AB Silicon,NPN,KTC3199 GR

AC Digital,NPN,KRC102 M

AB Silicon,PNP,KTA1266 GR

AC Digital,NPN,KRC102 M

AB Silicon,PNP,KTA1266 GR

AC Digital,NPN,KRC102 M

AB Silicon,NPN,KTC3199 GR

AB Silicon,PNP,KTA1266 GR

AC Silicon,NPN,2SC535 C

AC Silicon,NPN,KTC3200 GR

AD Silicon,PNP,2SB562 C

AC Digital,NPN,KRC102 M

AB Silicon,PNP,KTA1266 GR

AB Silicon,NPN,KTC3199 GR

AC Silicon,NPN,KTC3200 GR

AB Silicon,PNP,KTA1266 GR

AC Digital,NPN,KRC102 M

AB 100 µH,Choke

AB 1 mH,Choke

AB 2.2 µH,Peaking

AE 0.82 µH,Choke

AC 3 µH,Choke

AB 10 µH,Choke

AB 2.2 µH,Peaking

AB 10 µH,Choke

AC 0.82 µH

L801

L802

L803

L806

AB 10 µH,Choke

VARIABLE RESISTOR

VR351

RVR-M0999AFZZ

AB 10 kohm (B),Semi-VR

[FM Mute Level]

Q701

Q702,703

Q706

Q707,708

Q709

Q801

Q802

Q803

Q804

Q805

Q806

Q807

Q861

Q901

Q902

Q903

Q904

Q907

Q908

VARIABLE CAPACITORS

TC100V

VD301

VD302,303

RTO-H1004SJZZ

VHCSVC348S/-1

VHCKDV147C/-1

AF Trimmer,10 pF

AK Variable Capacitance,SVC348S

AH Variable Capacitance,KDV147C

VIBRATORS

X1V

RCRSB0002SJZZ

AG Crystal,27 MHz

AG VCO,456 kHz

AF Crystal,4.5 MHz

AG Ceramic,8 MHz

AE Crystal,32.768 kHz

AL Crystal,16.93 MHz

X351

X352

X701

X702

X801

RCRM-0007SJZZ

RCRSP0006SJZZ

RCRM-0008SJZZ

RCRSP0007SJZZ

RCRSP0002SJZZ

CAPACITORS

DIODES

C101,102

C101V

C102V,103V

C103

C104

C104V

C105

C105V

C106

C106V

C107

C108

C108V

C109

RC-GZA106AF1H

AB 10 µF,50V,Electrolytic

AC 1000 µF,6.3V,Electrolytic

AB 22 µF,25V,Electrolytic

AD 10 µF,50V,Electrolytic

AD 3 pF,50V

AB 100 µF,10V,Electrolytic

AA 0.0015 µF,50V

AA 0.1 µF,25V

AD 10 µF,50V,Electrolytic

1 µF,16V

RC-GZV108AF0J

RC-GZA226AF1E

RC-EZ0002SJZZ

VCCSCY1HL3R0C

RC-GZA107AF1A

VCKYPA1HB152K

VCKYCY1EF104Z

RC-EZ0002SJZZ

VCKYCY1CF105Z

RC-EZ0003SJZZ

VCKYPA1HB152K

VCKYCY1EF104Z

VCCSCY1HL3R0C

RC-GZA107AF1A

D201

VHD1N4148//-1

VHD1N4004//-1

VHD1N4148//-1

VHD1N4004//-1

VHD1N5402M/-1

VHD1N4004//-1

VHD1N4148//-1

AA Silicon,1N4148

AB Silicon,1N4004

AA Silicon,1N4148

AB Silicon,1N4004

AE Silicon,1N5402M

AB Silicon,1N4004

AA Silicon,1N4148

D301,302

D305,306

D308

D401~403

D411,412

D602~604

D605,606

1 D651~654

1 D657~660

D681~686

D688,689

D720~723

AD 100 µF,50V,Electrolytic

AA 0.0015 µF,50V

AA 0.1 µF,25V

AD 3 pF,50V

C109V

AB 100 µF,10V,Electrolytic

Download from Www.Somanuals.com. All Manuals Search And Download.

– 1 –

XL-3000V

PRICE

RANK

PRICE

RANK

DESCRIPTION

NO.

PARTS CODE

DESCRIPTION

NO.

PARTS CODE

C110

VCKYPA1HB102K

AA 0.001 µF,50V

C363

C364

C365

C366

C367,368

C369

C370

C371,372

C373,374

C380

C381

C382

C383

C384

C385

C386

C387

C391

C392

C393

C394

C395

C396

C397

C398

C399

C401~404

C407,408

C411

C412

C413

VCKYCY1EF223Z

RC-GZA106AF1C

VCKYCY1EF223Z

VCKYCY1HB102K

RC-EZD105AF1H

VCCSCY1HL560J

RC-GZA105AF1H

RC-EZD105AF1H

VCTYPA1CX183K

RC-GZA106AF1C

VCCCCY1HH120J

VCCCCY1HH150J

VCKYCY1EF223Z

VCKYCY1HB102K

VCKYPA1HF103Z

VCKYPA1HB331K

VCKYCY1EF223Z

RC-GZA476AF1C

VCKYCY1HB102K

RC-GZA105AF1H

RC-GZA476AF1C

VCKYCY1EF223Z

RC-GZA107AF1A

VCKYCY1EF223Z

RC-GZA107AF1A

VCKYPA1HF223Z

RC-GZA106AF1C

VCKYPA1HB331K

VCKYPA1HB472K

VCKYPA1HB221K

RC-GZA106AF1C

RC-GZA225AF1H

VCKYCY1HB272K

RC-QZA104AFYJ

RC-GZA106AF1C

RC-GZA336AF1C

RC-GZA107AF1C

VCKYCY1HB221K

VCKYCY1EF473Z

RC-GZA476AF1C

RC-GZA336AF1C

VCFYFA1HA104J

RC-GZV477AF1E

RC-GZA107AF1E

VCKYPA1HF223Z

RC-GZA106AF1C

RC-GZA107AF1E

VCKYPA1HF223Z

RC-GZA106AF1C

RC-GZA475AF1E

RC-GZW478AF1E

VCKYPA1HB472K

VCFYFA1HA104J

VCFYFA1HA473J

RC-GZW228AF1V

VCFYFA1HA473J

RC-GZA474AF1H

VCCCCY1HH220J

VCKYCY1EF104Z

VCKYCY1EF223Z

VCKYPA1HF103Z

VCKYCY1EB103K

RC-GZA335AF1H

VCKYCY1EB103K

RC-GZA106AF1C

VCKYCY1HB561K

RC-GZA107AF1A

VCCSCY1HL101J

VCKYCY1EB153K

RC-EZD476AF1A

VCKYCY1EB103K

VCKYCY1HB272K

VCKYCY1HB472K

VCKYCY1EB333K

VCKYCY1HB472K

VCKYCY1HB102K

RC-GZA476AF1A

AB 0.022 µF,25V

C110V~112V VCKYCY1EF104Z

C111,112

C113

C114

C115V

C116

C116V,117V

C118V

C119V,120V

C120

C121V

C122V

C124V

C125,126

C125V

C126V,127V

C129V

AA 0.1 µF,25V

AB 10 µF,16V,Electrolytic

AB 0.022 µF,25V

RC-EZ0002SJZZ

VCKYPA1HF223Z

RC-EZ0003SJZZ

RC-GZA226AF1E

VCKYPA1HF223Z

VCKYCY1EF104Z

RC-GZA226AF1E

VCKYCY1EF104Z

RC-GZA227AF1C

RC-GZA226AF1E

VCKYCY1EF104Z

RC-GZW228AF1V

RC-GZA107AF1A

VCKYCY1EF104Z

VCCCCY1HH270J

VCKYCY1EF104Z

VCCCCY1HH102J

VCKYCY1EF104Z

AD 10 µF,50V,Electrolytic

AB 0.022 µF,50V

AD 100 µF,50V,Electrolytic

AB 22 µF,25V,Electrolytic

AB 0.022 µF,50V

AA 0.1 µF,25V

AB 22 µF,25V,Electrolytic

AA 0.1 µF,25V

AA 0.001 µF,50V

AB 1 µF,50V,Electrolytic

AD 56 pF,50V

AB 1 µF,50V,Electrolytic

AA 0.018 µF,16V

AB 10 µF,16V,Electrolytic

AA 12 pF (CH),50V

AA 15 pF (CH),50V

AB 0.022 µF,25V

AB 220 µF,16V,Electrolytic

AB 22 µF,25V,Electrolytic

AA 0.1 µF,25V

AA 0.001 µF,50V

AF 2200 µF,35V,Electrolytic

AB 100 µF,10V,Electrolytic

AA 0.1 µF,25V

AB 0.01 µF,16V

AA 330 pF,50V

AB 0.022 µF,25V

AB 47 µF,16V,Electrolytic

AA 0.001 µF,50V

AB 1 µF,50V,Electrolytic

AB 47 µF,16V,Electrolytic

AB 0.022 µF,25V

AB 100 µF,10V,Electrolytic

AB 0.022 µF,25V

AB 100 µF,10V,Electrolytic

AB 0.022 µF,50V

AB 10 µF,16V,Electrolytic

AA 330 pF,50V

AA 27 pF (CH),50V

AA 0.1 µF,25V

AA 0.001 µF (CH),50V

AA 0.1 µF,25V

AA 10 µF,25V,Electrolytic

AA 33 pF (CH),50V

AB 100 µF,10V,Electrolytic

AA 0.1 µF,25V

AB 100 µF,10V,Electrolytic

AA 0.1 µF,25V

AB 100 µF,10V,Electrolytic

AA 0.1 µF,25V

AB 47 µF,10V,Electrolytic

AA 0.1 µF,25V

AB 22 µF,25V,Electrolytic

AA 22 pF (CH),50V

AA 0.1 µF,25V

AA 10 µF,25V,Electrolytic

AA 22 pF (CH),50V

AA 0.1 µF,25V

C130V

C131V

C135V,136V

C137V~140V RC-GZA106AF1E

C141V~144V VCCCCY1HH330J

C147V,148V

C149V,150V

C158V

C159V,160V

C161V

C162V

C164V

C165V

C166V

C167V,168V

C169V

C171V,172V

C183V

C184V

C201,202

C203,204

C208

RC-GZA107AF1A

VCKYCY1EF104Z

RC-GZA107AF1A

VCKYCY1EF104Z

RC-GZA107AF1A

VCKYCY1EF104Z

RC-GZA476AF1A

VCKYCY1EF104Z

RC-GZA226AF1E

VCCCCY1HH220J

VCKYCY1EF104Z

RC-GZA106AF1E

VCCCCY1HH220J

VCKYCY1EF104Z

VCKYCY1HB562K

RC-GZA105AF1H

RC-GZA107AF1C

RC-GZA476AF1C

VCKYCY1HB332K

RC-GZA475AF1H

RC-GZA105AF1H

RC-EZD105AF1H

VCKYPA1HF123Z

VCKYCY1HB102K

VCKYCY1EF103Z

VCKYCY1HB472K

VCCUCY1HJ7R0D

VCKYCY1HB472K

VCKYCY1EF223Z

VCKYCY1HB102K

VCKYCY1EF223Z

VCCCCY1HH100J

VCCSCY1HL330J

VCCUCY1HJ6R0D

VCCCCY1HH220J

VCKYCY1HB101K

RC-GZA106AF1C

VCKYCY1EF223Z

VCCSCY1HL5R0C

VCCCCY1HH180J

VCKYCY1EF223Z

VCCCPA1HH120J

VCKYCY1EF473Z

VCKYPA1HF223Z

VCCUPA1HJ270J

VCKYCY1HB561K

VCKYPA1HF223Z

VCCSCY1HL330J

VCKYCY1HB102K

VCKYCY1EF223Z

RC-GZA106AF1C

VCKYCY1EF223Z

VCCSCY1HL220J

VCKYCY1HB102K

RC-GZA225AF1H

RC-GZA105AF1H

VCKYCY1EF223Z

RC-GZA335AF1H

AA 330 pF,50V

AB 0.0047 µF,50V

AA 220 pF,50V

C414

C415,416

C417,418

C419,420

C421~424

C425,426

C429

C430

C431~433

C601

C602

C603

C613~616

C620

C621

C622

C624

C625

C626

C627

C628

C629

C630

C639,640

1 C651

1 C654

1 C657~660

C665

C683

C688

C689

C701,702

C703

C704

C705

C710

C711

C712

C713

C714

C715

AB 10 µF,16V,Electrolytic

AB 2.2 µF,50V,Electrolytic

AA 0.0027 µF,50V

AC 0.1 µF,50V,Mylar

AB 10 µF,16V,Electrolytic

AB 33 µF,16V,Electrolytic

AB 100 µF,16V,Electrolytic

AA 220 pF,50V

AA 0.0056 µF,50V

AB 1 µF,50V,Electrolytic

AB 100 µF,16V,Electrolytic

AB 47 µF,16V,Electrolytic

AA 0.0033 µF,50V

AB 4.7 µF,50V,Electrolytic

AB 1 µF,50V,Electrolytic

AD 0.012 µF,50V

C209

AB 0.047 µF,25V

C211,212

C213,214

C215

C216

C301

C302

C303

C304

C305

C306

C307

C308

C309

C310

C311

C312

C313

C314

C315

C316

C317

C318

C319

C329

C330

C331

C332

C334

C335

C337

C343

C349

C350,351

C352

AB 47 µF,16V,Electrolytic

AB 33 µF,16V,Electrolytic

AC 0.1 µF,50V,Thin Film

AC 470 µF,25V,Electrolytic

AB 100 µF,25V,Electrolytic

AB 0.022 µF,50V

AA 0.001 µF,50V

AB 0.022 µF,50V

AA 0.01 µF,25V

AB 10 µF,16V,Electrolytic

AB 100 µF,25V,Electrolytic

AB 0.022 µF,50V

AA 0.0047 µF,50V

AB 7pF (UJ),50V

AA 0.0047 µF,50V

AB 0.022 µF,25V

AB 10 µF,16V,Electrolytic

AB 4.7 µF,25V,Electrolytic

AG 4700 µF,25V,Electrolytic

AB 0.0047 µF,50V

AA 0.001 µF,50V

AB 0.022 µF,25V

AA 10 pF (CH),50V

AD 33 pF,50V

AC 0.1 µF,50V,Thin Film

AB 0.047 µF,50V,Thin Film

AF 2200 µF,35V,Electrolytic

AB 0.047 µF,50V,Thin Film

AA 0.47 µF,50V,Electrolytic

AA 22 pF (CH),50V

AA 0.1 µF,25V

AB 6 pF (UJ),50V

AA 22 pF (CH),50V

AB 100 pF,50V

AB 10 µF,16V,Electrolytic

AB 0.022 µF,25V

AD 5 pF,50V

AA 18 pF (CH),50V

AB 0.022 µF,25V

AA 12 pF (CH),50V

AB 0.047 µF,25V

AB 0.01 µF,50V

AA 0.01 µF,25V

AB 0.022 µF,50V

AB 3.3 µF,50V,Electrolytic

AA 0.01 µF,25V

AA 27 pF (UJ),50V

AA 560 pF,50V

AB 10 µF,16V,Electrolytic

AA 560 pF,50V

AB 0.022 µF,50V

AD 33 pF,50V

AA 0.001 µF,50V

AB 0.022 µF,25V

AB 10 µF,16V,Electrolytic

AB 0.022 µF,25V

AD 22 pF,50V

AA 0.001 µF,50V

AB 100 µF,10V,Electrolytic

AA 100 pF,50V

C801

C802

C803

C804

C805

C806

C807

C809

AA 0.015 µF,25V

AC 47 µF,10V,Electrolytic

AA 0.01 µF,25V

C353,354

C355

C356

C357

C358

AA 0.0027 µF,50V

AA 0.0047 µF,50V

AB 2.2 µF,50V,Electrolytic

AB 1 µF,50V,Electrolytic

AB 0.022 µF,25V

AC 0.033 µF,25V

AA 0.0047 µF,50V

C360,361

C362

C810

C811

AA 0.001 µF,50V

AB 3.3 µF,50V,Electrolytic

AB 47 µF,10V,Electrolytic

Download from Www.Somanuals.com. All Manuals Search And Download.

– 2 –

XL-3000V

PRICE

RANK

PRICE

RANK

NO.

DESCRIPTION

NO.

PARTS CODE

DESCRIPTION

PARTS CODE

C812

C813

C817~819

C820

C821

C822

C823

C824,825

C826,827

C828

C829

C830

C835

C836

C837

C838

C839

C840,841

C842

C843

C844

C845

C846,847

C848

C849

C850

C851

C852

C853

C855

C857

C858

C859

C860

C862

C863

VCKYCY1EF103Z

RC-EZD107AF1A

VCKYCY1EB104K

VCKYCY1EF103Z

VCKYCY1EB104K

RC-GZA227AF1A

VCKYCY1EF103Z

VCKYCY1EB563K

VCCCCY1HH150J

RC-GZA107AF1A

RC-EZD107AF1A

VCKYCY1EB563K

RC-GZA107AF1A

VCKYCY1HB471K

RC-EZD476AF1A

VCCSCY1HL2R0C

RC-GZA107AF1A

RC-GZA476AF1A

VCKYCY1EF104Z

VCKYCY1HB682K

RC-GZA107AF1A

VCKYCY1EF104Z

VCCSCY1HL390J

VCKYCY1EB563K

RC-GZA227AF1A

RC-EZD107AF1A

VCQYKA1HM222J

VCKYPA1HB472K

RC-GZA107AF1A

RC-GZA476AF1C

VCKYCY1EF103Z

RC-GZA477AF1A

VCKYCY1EF104Z

VCKYPA1HB102K

VCKYCY1HB471K

VCKYCY1HB221K

VCKYPA1HB102K

RC-EZD476AF1C

VCKYCY1EB104K

VCKYCY1HB272K

RC-EZD476AF1C

RC-GZV227AF1H

RC-EZ0002SJZZ

RC-GZA107AF1A

AA 0.01 µF,25V

R105,106

R105V

R107V,108V

R108

R109

R110

VRD-ST2EE471J

VRS-CY1JB472J

VRS-CY1JB103J

VRD-ST2CD102J

VRD-ST2CD223J

VRS-CY1JB102J

VRD-ST2CD102J

VRS-CY1JB222J

VRS-CY1JB560J

VRG-ST2EC101J

VRS-CY1JB101J

VRS-CY1JB682J

VRD-ST2CD563J

VRS-CY1JB153J

VRD-ST2EE473J

VRS-CY1JB333J

VRS-CY1JB102J

VRS-CY1JB103J

VRS-CY1JB332J

VRS-CY1JB102J

VRD-ST2EE103J

VRS-CY1JB750J

VRS-CY1JB473J

VRS-CY1JB221J

VRS-VV3LA681J

VRS-CY1JB102J

VRS-CY1JB330J

AA 470 ohms,1/4W

AB 100 µF,10V,Electrolytic

AD 0.1 µF,25V

AA 4.7 kohms,1/16W

AA 10 kohm,1/16W

AA 1 kohm,1/6W

AA 22 kohms,1/6W

AA 1 kohm,1/16W

AA 1 kohm,1/6W

AA 0.01 µF,25V

AD 0.1 µF,25V

AB 220 µF,10V,Electrolytic

AA 0.01 µF,25V

R111

AD 0.056 µF,25V

R111V

R112V

1 R113,114

R113V

R114V

R115

R115V,116V

R118

R119

R120

R121

R121V

R122

R123

R123V

R124

R124V

R125,126

R137V

R138V

AA 2.2 kohms,1/16W

AA 56 ohms,1/16W

AB 100 ohm,1/4W,Fusible

AA 100 ohm,1/16W

AA 6.8 kohms,1/16W

AA 56 kohms,1/6W

AA 15 kohms,1/16W

AA 47 kohms,1/4W

AA 33 kohms,1/16W

AA 1 kohm,1/16W

AA 10 kohm,1/16W

AA 3.3 kohms,1/16W

AA 1 kohm,1/16W

AA 10 kohm,1/4W

AA 75 ohms,1/16W

AA 47 kohms,1/16W

AA 220 ohms,1/16W

AC 680 ohms,3W,Metal Oxide Film

AA 1 kohm,1/16W

AA 33 ohms,1/16W

AA 1 kohm,1/16W

AA 33 ohms,1/16W

AA 220 ohms,1/16W

AA 4.7 kohms,1/16W

AA 820 ohms,1/16W

AA 4.7 kohms,1/16W

AA 33 ohms,1/16W

AA 4.7 kohms,1/16W

AA 33 ohms,1/16W

AA 10 ohm,1/16W

AA 33 ohms,1/16W

AA 4.7 kohms,1/16W

AA 100 kohm,1/16W

AA 82 ohms,1/16W

AA 100 kohm,1/16W

AA 10 kohm,1/16W

AA 4.7 kohms,1/16W

AA 270 ohms,1/16W

AA 100 ohm,1/16W

AA 8.2 kohms,1/6W

AA 8.2 kohms,1/16W

AA 100 kohm,1/16W

AA 10 kohm,1/16W

AA 47 kohms,1/6W

AA 330 ohms,1/4W

AA 10 kohm,1/16W

AA 10 kohm,1/6W

AA 2.7 kohms,1/16W

AA 2.7 kohms,1/6W

AA 12 kohms,1/16W

AA 12 kohms,1/6W

AA 12 kohms,1/16W

AA 22 ohms,1/4W

AA 100 kohm,1/16W

AA 33 kohms,1/6W

AA 47 kohms,1/16W

AA 680 ohms,1/16W

AA 10 ohm,1/16W

AA 47 ohms,1/4W

AA 10 kohm,1/16W

AA 470 ohms,1/4W

AA 4.7 kohms,1/16W

AA 2.2 kohms,1/16W

AA 680 ohms,1/16W

AA 33 ohms,1/16W

AA 330 ohms,1/16W

AA 68 kohms,1/16W

AA 5.6 kohms,1/6W

AA 2.7 kohms,1/16W

AA 5.6 kohms,1/16W

AA 1 kohm,1/16W

AA 270 ohms,1/16W

AA 3.3 kohms,1/16W

AA 1 kohm,1/16W

AA 470 kohms,1/16W

AA 15 pF (CH),50V

AB 100 µF,10V,Electrolytic

AD 0.056 µF,25V

AB 100 µF,10V,Electrolytic

AA 470 pF,50V

AC 47 µF,10V,Electrolytic

AD 2 pF,50V

AB 100 µF,10V,Electrolytic

AB 47 µF,10V,Electrolytic

AA 0.1 µF,25V

AA 0.0068 µF,50V

AB 100 µF,10V,Electrolytic

AA 0.1 µF,25V

AD 39 pF,50V

AD 0.056 µF,25V

AB 220 µF,10V,Electrolytic

AB 100 µF,10V,Electrolytic

AB 0.0022 µF,50V,Mylar

AB 0.0047 µF,50V

R139V~141V VRS-CY1JB102J

R142V

R143V

R156V

VRS-CY1JB330J

VRS-CY1JB221J

VRS-CY1JB472J

AB 100 µF,10V,Electrolytic

AB 47 µF,16V,Electrolytic

AA 0.01 µF,25V

AC 470 µF,10V,Electrolytic

AA 0.1 µF,25V

AA 0.001 µF,50V

AA 470 pF,50V

R157V~159V VRS-CY1JB821J

R160V

R161V

R162V

R163V

R164V,165V

R166V~169V VRS-CY1JB330J

R170V

R171V

R178V

R181V~184V VRS-CY1JB104J

R185V~190V VRS-CY1JB103J

R193V

R194V

R195V

R201

VRS-CY1JB472J

VRS-CY1JB330J

VRS-CY1JB472J

VRS-CY1JB330J

VRS-CY1JB100J

C864~869

C870

C871

C872

C887

C892,893

C901,902

C903,904

C905,906

AA 220 pF,50V

AA 0.001 µF,50V

AC 47 µF,16V,Electrolytic

AD 0.1 µF,25V

VRS-CY1JB472J

VRS-CY1JB104J

VRS-CY1JB820J

AA 0.0027 µF,50V

AC 47 µF,16V,Electrolytic

AC 220 µF,50V,Electrolytic

AD 10 µF,50V,Electrolytic

AB 100 µF,10V,Electrolytic

VRS-CY1JB472J

VRS-CY1JB271J

VRS-CY1JB101J

VRD-ST2CD822J

VRS-CY1JB822J

VRS-CY1JB104J

VRS-CY1JB103J

VRD-ST2CD473J

VRD-ST2EE331J

VRS-CY1JB103J

VRD-ST2CD103J

VRS-CY1JB272J

VRD-ST2CD272J

VRS-CY1JB123J

VRD-ST2CD123J

VRS-CY1JB123J

VRD-ST2EE220J

VRS-CY1JB104J

VRD-ST2CD333J

VRS-CY1JB473J

VRS-CY1JB681J

VRS-CY1JB100J

VRD-ST2EE470J

VRS-CY1JB103J

VRD-ST2EE471J

VRS-CY1JB472J

VRS-CY1JB222J

VRS-CY1JB681J

VRS-CY1JB330J

VRS-CY1JB331J

VRS-CY1JB683J

VRD-ST2CD562J

VRS-CY1JB272J

VRS-CY1JB562J

VRS-CY1JB102J

VRS-CY1JB271J

VRS-CY1JB332J

VRS-CY1JB102J

VRS-CY1JB474J

RESISTORS

R202

VRS-CY1JB000J

AA 0 ohm,Jumper,0.8×1.55mm,Green

AA 4.7 kohms,1/16W

AA 1 kohm,1/16W

AA 100 kohm,1/16W

AA 100 ohm,1/4W

R203,204

R205,206

R207

R208

R209

R210

R211

R212

R213~216

R217

R218

R301

R302

R303

R304

R305

R306

R307

R308

R309

R310

R312

R313

R314,315

R316

R323

R336

R350

R351

R352

R353

R355

R356

R357

R01AV~03AV VRS-CY1JB472J

R06AV~12AV VRS-CY1JB472J

R5V

VRS-CY1JB472J

VRS-CY1JB102J

VRS-CY1JB104J

VRD-ST2EE101J

VRS-CY1JB121J

VRS-CY1JB103J

VRS-CY1JB102J

VRS-CY1JB820J

VRD-ST2CD332J

VRS-CY1JB103J

VRS-CY1JB823J

VRS-CY1JB683J

VRS-CY1JB823J

VRD-ST2CD683J

VRS-CY1JB472J

VRS-CY1JB000J

VRS-CY1JB472J

VRS-CY1JB393J

VRS-CY1JB104J

VRS-CY1JB102J

VRS-CY1JB682J

VRD-ST2CD563J

VRS-CY1JB103J

R7A0

R7A1

R7A2

R7A3

R7A4

R7A5

R7A6

R7A7

R7A8

R7A9

R7B0

R80A

R80B

R80C

R80E

R80F

R80G

R91V

R93V

R94AV

R94BV

R97V

R98V

R100V

R101,102

R101V,102V

R103

AA 120 ohms,1/16W

AA 10 kohm,1/16W

AA 1 kohm,1/16W

AA 82 ohms,1/16W

AA 3.3 kohms,1/6W

AA 10 kohm,1/16W

AA 82 kohms,1/16W

AA 68 kohms,1/16W

AA 82 kohms,1/16W

AA 68 kohms,1/6W

AA 4.7 kohms,1/16W

AA 0 ohm,Jumper,0.8×1.55mm,Green

AA 4.7 kohms,1/16W

AA 39 kohms,1/16W

AA 100 kohm,1/16W

AA 1 kohm,1/16W

R103V

R104

R104V

AA 6.8 kohms,1/16W

AA 56 kohms,1/6W

AA 10 kohm,1/16W

Download from Www.Somanuals.com. All Manuals Search And Download.

– 3 –

XL-3000V

PRICE

RANK

PRICE

RANK

DESCRIPTION

NO.

PARTS CODE

DESCRIPTION

NO.

PARTS CODE

R358

R359

R360

R361,362

R363

R364

R365

R366

R371~374

R376

R377

R379

R380

R381

R382

R383

R384

R385

R386

R387

R391,392

R393

R395

R401,402

R403,404

R405,406

R407,408

R415~418

R421,422

R423~425

R437,438

R439,440

R603,604

R607

R608,609

R610

R611

R612

R613

R614

R617

R619,620

R621

R623,624

R628

VRS-CY1JB822J

VRS-CY1JB182J

VRS-CY1JB472J

VRS-CY1JB562J

VRD-ST2CD332J

VRS-CY1JB332J

VRS-CY1JB103J

VRS-CY1JB222J

VRS-CY1JB102J

VRD-ST2CD103J

VRD-ST2CD562J

VRS-CY1JB222J

VRD-ST2CD152J

VRS-CY1JB103J

VRD-ST2EE331J

VRS-CY1JB562J

VRD-ST2CD682J

VRD-ST2CD562J

VRD-ST2EE331J

VRD-ST2CD562J

VRD-ST2EE391J

VRS-CY1JB102J

VRD-ST2CD473J

VRS-CY1JB102J

VRS-CY1JB182J

VRD-ST2CD273J

VRD-ST2CD272J

VRS-CY1JB102J

VRD-ST2CD102J

VRS-CY1JB682J

VRS-CY1JB392J

VRS-CY1JB103J

VRS-CY1JB682J

VRS-CY1JB102J

VRD-ST2EE470J

VRD-ST2EE101J

VRD-ST2EE821J

VRS-CY1JB472J

VRD-ST2EE470J

VRD-ST2CD333J

VRD-ST2EE470J

VRS-CY1JB223J

VRD-ST2EE101J

VRD-ST2EE821J

VRD-ST2EE332J

VRD-ST2EE4R7J

VRD-ST2EE331J

VRD-ST2CD103J

VRD-ST2CD473J

VRD-RT2HD272J

VRD-ST2CD102J

VRD-ST2EE102J

VRS-CY1JB103J

VRS-CY1JB392J

VRS-CY1JB272J

VRS-CY1JB222J

VRS-CY1JB272J

VRS-CY1JB122J

VRS-CY1JB152J

VRS-CY1JB122J

VRS-CY1JB103J

VRS-CY1JB473J

VRS-CY1JB103J

VRS-CY1JB473J

VRS-CY1JB102J

VRS-CY1JB473J

VRS-CY1JB102J

VRD-ST2CD102J

VRS-CY1JB102J

VRD-ST2CD102J

VRS-CY1JB102J

VRD-ST2CD102J

VRS-CY1JB102J

VRD-ST2CD102J

VRS-CY1JB102J

AA 8.2 kohms,1/16W

R778~781

R782

R783

R785

R792

R793

R795

R796

R797

R798

R799

R801

R802

R804

R806

R807

R808

R809

R810

R811

R812

R813

R814

R819

R820

R821

R822

R823

R824

R825

R826

R827

R828

R829

R830

R831~837

R843

R851

R852~855

R861~863

R864,865

R866

R867

R868

R870

R873

R874

R876

R877

R879

R880

R881

R882

R883,884

R885

R887

R888

R901

R902

R904

R905

R910

R911

R912

VRS-CY1JB473J

VRS-CY1JB102J

VRS-CY1JB333J

VRS-CY1JB102J

VRS-CY1JB473J

VRS-CY1JB103J

VRD-ST2CD473J

VRD-ST2EE102J

VRS-CY1JB222J

VRS-CY1JB472J

VRD-ST2EE102J

VRD-ST2CD103J

VRS-CY1JB473J

VRS-CY1JB104J

VRS-CY1JB153J

VRS-CY1JB103J

VRS-CY1JB332J

VRS-CY1JB103J

VRS-CY1JB332J

VRS-CY1JB222J

VRS-CY1JB332J

VRD-ST2EE100J

VRS-CY1JB332J

VRD-ST2CD221J

VRS-CY1JB102J

VRD-ST2CD151J

VRD-ST2EE330J

VRD-ST2CD102J

VRS-CY1JB473J

VRS-CY1JB823J

VRS-CY1JB272J

VRS-CY1JB393J

VRS-CY1JB122J

VRD-ST2CD683J

VRD-ST2CD102J

VRS-CY1JB102J

VRD-ST2CD102J

VRS-CY1JB331J

VRS-CY1JB104J

VRS-CY1JB222J

VRD-ST2CD273J

VRD-ST2CD472J

VRS-CY1JB332J

VRS-CY1JB273J

VRS-CY1JB333J

VRD-ST2CD332J

VRS-CY1JB222J

VRS-CY1JB154J

VRS-CY1JB683J

VRS-CY1JB332J

VRS-CY1JB474J

VRS-CY1JB682J

VRD-ST2EE8R2J

VRS-CY1JB223J

VRD-ST2CD103J

VRS-CY1JB222J

VRS-CY1JB473J

VRS-CY1JB222J

VRS-CY1JB473J

VRD-ST2EE272J

VRD-ST2EE101J

VRD-ST2EE471J

VRG-ST2EM100J

VRD-ST2CD471J

AA 47 kohms,1/16W

AA 1.8 kohms,1/16W

AA 4.7 kohms,1/16W

AA 5.6 kohms,1/16W

AA 3.3 kohms,1/6W

AA 3.3 kohms,1/16W

AA 10 kohm,1/16W

AA 2.2 kohms,1/16W

AA 1 kohm,1/16W

AA 10 kohm,1/6W

AA 5.6 kohms,1/6W

AA 2.2 kohms,1/16W

AA 1.5 kohms,1/6W

AA 10 kohm,1/16W

AA 330 ohms,1/4W

AA 5.6 kohms,1/16W

AA 6.8 kohms,1/6W

AA 5.6 kohms,1/6W

AA 330 ohms,1/4W

AA 5.6 kohms,1/6W

AA 390 ohms,1/4W

AA 1 kohm,1/16W

AA 47 kohms,1/6W

AA 1 kohm,1/16W

AA 1.8 kohms,1/16W

AA 27 kohms,1/6W

AA 2.7 kohms,1/6W

AA 1 kohm,1/16W

AA 1 kohm,1/6W

AA 6.8 kohms,1/16W

AA 3.9 kohms,1/16W

AA 10 kohm,1/16W

AA 6.8 kohms,1/16W

AA 1 kohm,1/16W

AA 47 ohms,1/4W

AA 100 ohm,1/4W

AA 820 ohms,1/4W

AA 4.7 kohms,1/16W

AA 47 ohms,1/4W

AA 33 kohms,1/6W

AA 47 ohms,1/4W

AA 22 kohms,1/16W

AA 100 ohm,1/4W

AA 820 ohms,1/4W

AA 3.3 kohms,1/4W

AA 4.7 ohms,1/4W

AA 330 ohms,1/4W

AA 10 kohm,1/6W

AA 47 kohms,1/6W

AA 2.7 kohms,1/2W

AA 1 kohm,1/6W

AA 1 kohm,1/16W

AA 33 kohms,1/16W

AA 1 kohm,1/16W

AA 47 kohms,1/16W

AA 10 kohm,1/16W

AA 47 kohms,1/6W

AA 1 kohm,1/4W

AA 2.2 kohms,1/16W

AA 4.7 kohms,1/16W

AA 1 kohm,1/4W

AA 10 kohm,1/6W

AA 47 kohms,1/16W

AA 100 kohm,1/16W

AA 15 kohms,1/16W

AA 10 kohm,1/16W

AA 3.3 kohms,1/16W

AA 10 kohm,1/16W

AA 3.3 kohms,1/16W

AA 2.2 kohms,1/16W

AA 3.3 kohms,1/16W

AA 10 ohm,1/4W

AA 3.3 kohms,1/16W

AA 220 ohms,1/6W

AA 1 kohm,1/16W

AA 150 ohms,1/6W

AA 33 ohms,1/4W

AA 1 kohm,1/6W

AA 47 kohms,1/16W

AA 82 kohms,1/16W

AA 2.7 kohms,1/16W

AA 39 kohms,1/16W

AA 1.2 kohms,1/16W

AA 68 kohms,1/6W

AA 1 kohm,1/6W

AA 1 kohm,1/16W

AA 1 kohm,1/6W

AA 330 ohms,1/16W

AA 100 kohm,1/16W

AA 2.2 kohms,1/16W

AA 27 kohms,1/6W

AA 4.7 kohms,1/6W

AA 3.3 kohms,1/16W

AA 27 kohms,1/16W

AA 33 kohms,1/16W

AA 3.3 kohms,1/6W

AA 2.2 kohms,1/16W

AA 150 kohms,1/16W

AA 68 kohms,1/16W

AA 3.3 kohms,1/16W

AA 470 kohms,1/16W

AA 6.8 kohms,1/16W

AA 8.2 ohms,1/4W

AA 22 kohms,1/16W

AA 10 kohm,1/6W

AA 2.2 kohms,1/16W

AA 47 kohms,1/16W

AA 2.2 kohms,1/16W

AA 47 kohms,1/16W

AA 2.7 kohms,1/4W

AA 100 ohm,1/4W

AA 470 ohms,1/4W

10 ohm,1/4W,Fusible

AA 470 ohms,1/6W

R629

R634

R637,638

R661,662

R685

R686

R687

R688

R689

R702

R706

R707

R708

R710

R711

R718

R719

AA 1 kohm,1/4W

AA 10 kohm,1/16W

AA 3.9 kohms,1/16W

AA 2.7 kohms,1/16W

AA 2.2 kohms,1/16W

AA 2.7 kohms,1/16W

AA 1.2 kohms,1/16W

AA 1.5 kohms,1/16W

AA 1.2 kohms,1/16W

AA 10 kohm,1/16W

AA 47 kohms,1/16W

AA 10 kohm,1/16W

AA 47 kohms,1/16W

AA 1 kohm,1/16W

AA 47 kohms,1/16W

AA 1 kohm,1/16W

AA 1 kohm,1/6W

AA 1 kohm,1/16W

AA 1 kohm,1/6W

AA 1 kohm,1/16W

AA 1 kohm,1/6W

AA 1 kohm,1/16W

AA 1 kohm,1/6W

AA 1 kohm,1/16W

R720A,B

R721,722

R723

R725

R727

1 R913

R914

R728

R729

OTHER CIRCUITRY PARTS

R731~735

R738~742

R744

R749,750

R751

R755

R757,758

R759

R760~766

R768

R769~771

R772,773

R776,777

CFW451,452 QCNWN0308SJZZ

AB Lead Wire

AD Flat Wire,3Pin

AB Lead Wire

CFW701A,B

CFW852

CNP307

CNP601,602

CNP607

CNP608

1 CNP651

CNP652

CNP653

CNP701

CNP702

CNP703

QCNWN0292SJZZ

QCNWN0303SJZZ

QCNCM010LAWZZ J AC Plug,11Pin

QCNCM999CAFZZ

QCNCM004BAFZZ

QCNCM041ESJZZ

QCNCM998BAFZZ

QCNCM999BAFZZ

QCNCM999KAFZZ

QCNCM999NAFZZ

AG Plug,3Pin

AB Plug,2Pin

AE Plug,5Pin

AC Plug,2Pin

AD Plug,2Pin

Plug,10Pin

AC Plug,13Pin

Download from Www.Somanuals.com. All Manuals Search And Download.

– 4 –

XL-3000V

PRICE

RANK

PRICE

RANK

NO.

DESCRIPTION

NO.

PARTS CODE

DESCRIPTION

PARTS CODE

CNP707

CNP801

CNP801V

CNP802

CNP802A

CNP803

CNP804

CNP804V

CNP805

CNP806

CNP807

CNP810

CNS307

CNS801

CNW3

QCNCM998DAFZZ

QCNCM037ESJZZ

QCNCW010MSJZZ

QCNCW007RSJZZ

QCNCM999HAFZZ

QCNCM035FSJZZ

QCNCM038BSJZZ

QCNCM015GSJZZ

QCNCM004CAFZZ

QCNCM999CAFZZ

QCNCM999BAFZZ

AB Plug,4Pin

AD Plug,5Pin

Plug,12Pin

701

702

703

704

NM801

NM802

NSW801

LX-WZ1070AFZZ

XBBSD20P03000

XBSSD26P06000

XHBSD20P05000

RMOTV0409AFM1

RMOTV0408SJM1

QSW-F9001AWZZ

AA Washer,ø1.5×ø3.8×0.25mm

AA Screw,ø2×3mm

AA Screw,ø2.6×6mm

AF Socket,16Pin

AD Plug,8Pin

AD Plug,6Pin

AB Plug,2Pin

AB Plug,7Pin

AB Plug,3Pin

AG Plug,3Pin

AD Plug,2Pin

AA Screw,ø2×5mm

AN Motor with Gear [Sled]

AR Motor with Chassis [Spindle]

AE Switch,Push Type [Pickup In]

CABINET PARTS

200

201

202

203

204

205

206

207

208

209

210

211

212

213

214

215

216

217

218

219

220

221

222

223

224

225

226

228

229

230

231

232

233

234

235

236

237

238

239

240

GCABA1073SJSA

Front Cabinet

AL Bottom Cabinet

Rear Panel

AE Cover,Remote Sensor

AN CD Lid

GCABB1066SJSA

GCOVA1013SJSA

GCOVA1005SJSA

GFTAT1008SJSA

LANGQ0002SJFW

HDECQ0060SJSA

HDECQ0051SJSA

JKNBZ0053SJSA

JKNBZ0054SJSA

LANGF0033SJFW

LANGF0034SJFW

LANGF0035SJFW

LANGK0025SJFW

LANGK0026SJFW

LCHSM0014SJFW

LHLDW1001SJZZ

LHLDZ1033SJSA

LHLDZ1034SJSA

LHLDZ1035SJSA

LHLDZ1036SJSA

LPLTP0001SJSA

MLEVP0006SJSA

MLEVP0007SJSA

NGERW0004SJSA

NGERW0005SJSA

NGERW0006SJSA

PCOVU9002SJZZ

PCOVZ1005SJSA

PCUSG0003SJZZ

PGUMS0002SJZZ

PRDAR0051SJFW

PRDAR0038SJFW

PREFL0001SJSA

PSHEP0003SJZZ

PSHEP0004SJZZ

QFSHD0001AWZZ

TLABS0004SJZZ

TLABS0036SJZZ

TSPC-0254SJZZ

QCNCW010LAWZZ J AD Socket,11Pin

QCNCW010MSJZZ

QCNWN0288SJZZ

Socket,12Pin

AE Flat Cable,16Pin

Connector Ass’y,3Pin

AE Connector Ass’y,3/3Pin

Connector Ass’y,2/2Pin

CNW601,602 QCNWN0326SJZZ

CNW607/CNS607 QCNWN0291SJZZ

CNW608/CNS608 QCNWN0314SJZZ

AB Lug

Clear Panel,CD Lid

AE Clear Panel,Display

AF Knob,Operation A

AF Knob,Operation B

AB Bracket,Main PWB

AB Bracket,Tuner PWB

AC Bracket,Gear Box

AE Bracket,Tuner PWB

AB Cover,Lamp

CNW653

QCNWN0331SJZZ

Connector Ass’y,2Pin

CNW701/CNS701 QCNWN0271SJZZ

CNW702/CNS702 QCNWN0311SJZZ

CNW703A/CNS703QCNWN0332SJZZ

CNW704/CNS704 QCNWN0324SJZZ

CNW707/CNS707/CNS652

CNW801

CNW802V/CNS802QCNWN0313SJZZ

CNW803/CNS803 QCNWN0276SJZZ

CNW804/CNS804 QCNWN0290SJZZ

CNW805/CNS805 QCNWN0296SJZZ

CNW806/CNS806 QCNWN0270SJZZ

CNW807/CNS807 QCNWN0271SJZZ

1 F651,652

1 F653

1 F654

J601

AD Connector Ass’y,2/2Pin

Connector Ass’y,10/10Pin

Connector Ass’y,13/13Pin

Connector Ass’y,7/7Pin

AD Connector Ass’y,3/4/2Pin

Flat Cable,12Pin

QCNWN0301SJZZ

QCNWN0312SJZZ

Connector Ass’y,9/8Pin

AH Chassis

AD Nylon Band

AE Connector Ass’y,6/6Pin

AD Connector Ass’y,2Pin

AE Connector Ass’y,3/3Pin

AD Connector Ass’y,2/2Pin

AE Fuse,T3.15A L 250V

Fuse,T1.6A L 250V

Temperature Fuse,2A,250V

AG Jack,Headphones

AM Jack,CD Degital Output

AR LCD Display

AT Lamp

AM Motor with Gear [CD Lid]

AP Fan Motor

AN Motor with Gear [Sled]

AR Motor with Chassis [Spindle]

AE Switch,Push Type [Pickup In]

AG Relay

AK Remote Sensor

AF Terminal,Antenna

AE Socket,Video/AUX Input/Video Out

AF Terminal,Speaker

AD Socket AC Input

AH Switch,Rotary Type

[Voltage Selector]

AD Switch,Key Type [On/Stand-by]

AD Switch,Key Type

[CD Lid Open/Close]

AD Switch,Key Type [FF/Preset Up]

AD Switch,Key Type

AD LCD Holder,A

AD LED Holder,A

AE Gear Box

AE Lid,Gear Box

AE Cam Plate

AE Rotate Lever,CD Lid,Left

AE Rotate Lever,CD Lid,Right

AE Drive Gear,A

QFS-D322ABGNI

QFS-D162ABGNI

QFS-T202BSJNO

QJAKM0001SJZZ

VHPPLT130T2-1

RV-LX0012SJZZ

RLMPP0001SJZZ

RMOTV0004SJM1

RMOTV0006SJZZ

RMOTV0409AFM1

RMOTV0408SJM1

QSW-F9001AWZZ

RRLYD0004SJZZ

VHLN64H380A-1

QTANC9003SJZZ

QSOCJ0302SJZZ

QTANA0007SJZZ

QSOCA0212AWZZ

QSOCE0008AWZZ

J801

AE Drive Gear,B

LCD701

LMP701

M801

AG Drive Gear,C

AB Felt,CD Lid Cover

AE Indicator Panel

AC Cushion,Leg

AA Cushion,CD Lid

Radiator,Main

AE Radiator,Transistor

AD LCD Diffusion Plate

AE Sheet,LCD

AD LCD Reflect Paper

AB Holder,Fuse

M802

NM801

NM802

NSW801

1 RLY601

RX701

SO301

SO401

SO601

1 SO655

1 SW651

AC Label,Laser

AB Label,Class 3A

Label,Specification

[Except for Thailand/Philip-

pines]

SW709

SW710

QSW-K0004SJZZ

240

TSPC-0271SJZZ

TSPC-0282SJZZ

Label,Specification

[For Thailand]

Label,Specification

[For Philippines]

SW711

SW712

QSW-K0004SJZZ

[CD Play/Pause/Tuning Up]

AD Switch,Key Type [Volume Up]

AD Switch,Key Type [Volume Down]

AD Switch,Key Type [Memory/Set]

AD Switch,Key Type [Bass/Treble]

AD Switch,Key Type

[CD Stop/Tuning Down]

AD Switch,Key Type

[REW/Preset Down]

AD Switch,Key Type [Function]

AG Switch,Lever Type [CD Lid]

241

242

243

244

245

246

247

248

249

250

251

252

601

602

603

604

605

606

607

608

609

610

611

612

613

615

PCOVS3005SJFW

PRDAR0048SJFW

LANGF0037SJFW

LANGK0029SJFW

LANGK0028SJFW

PCOVP1003SJZZ

PCOVP1004SJZZ

PSPAH0001SJZZ

PCOVM3001SJFW

PCOVU9001SJZZ

LX-WZ9005SJZZ

LX-EZ0001SJFN

LX-WZ7094AFZZ

XEBSD25P08000

XEBSD25P10000

XEBSD25P12000

XEBSF25P08000

XHBSD20P05000

XHBSD30P06000

XHBSD40P08000

XJBSD30P06000

XJBSD30P08000

XJBSD30P10000

XJBSD30P14000

XJBSF30P10000

AE Plate,Shield

SW713

SW718

SW721

SW722

SW725

QSW-K0004SJZZ

Radiator,Sub

AC Bracket,Fan Motor

AB Bracket,Decode PWB

Bracket,Decode PWB

Shield Cover,Power PWB (A)

Shield Cover,Power PWB (B)

AC Felt

Shield Cover

AC Cover,Lamp

AC Felt

Thermo Shield Cover

AB Screw,ø2.5×10mm

AA Washer,Special Type

AA Screw,ø2.5×8mm

AA Screw,ø2.5×10mm

AA Screw,ø2.5×12mm

AA Screw,ø2.5×8mm

AA Screw,ø2×5mm

AA Screw,ø3×6mm

AA Screw,ø4×8mm

AA Screw,ø3×6mm

AA Screw,ø3×8mm

AA Screw,ø3×10mm

AA Screw,ø3×14mm

AA Screw,ø3×10mm

SW726

QSW-K0004SJZZ

SW727

SW802

QSW-K0004SJZZ

QSW-B0001SJZZ

CD MECHANISM PARTS

301

302

303

304

305

306

307

1 308

308- 1

NGERH0586AFZZ

NGERH0587AFZZ

MLEVP0010AWZZ

NSFTM0291AFFW

PCOVP1333AFSA

PCUSG0001AWSA

PCUSG0004AWSA

DCTRH8005SJ01

————

AC Gear,Middle

AC Gear,Drive

AC Rail,Guide

AD Shaft,Guide

AF Cover,Mechanism

AD Cushion (Green)

AD Cushion (Red-Brown)

BA Pickup Unit Ass’y

—

Pickup Unit

(Not Replacement Item)

AC Gear,Rack

AA Spring,Rack

308- 2

308- 3

NGERR0043AFZZ

MSPRC0961AFZZ

Download from Www.Somanuals.com. All Manuals Search And Download.

– 5 –

XL-3000V

PRICE

RANK

PRICE

RANK

DESCRIPTION

NO.

PARTS CODE

DESCRIPTION

NO.

PARTS CODE

616

617

618

619

620

621

622

623

XJBSF30P12000

XJPSF30P11000

XEBSD25P14000

XHBSD25P08000

XESSD25P12000

XWSSE03-01050

LX-JZ0001SJFD

LX-WZ9006SJZZ

AA Screw,ø3×12mm

AA Screw,ø3×11mm

P.W.B. ASSEMBLY (Not Replacement Item)

AA Screw,ø2.5×14mm

AA Screw,ø2.5×8mm

PWB-A1~8

DCEKLV035SJ03

Main/Tuner/Display/Terminal/

Switch/Led/Lamp/Holder

Power

AA Screw,ø2.5×12mm

AA Washer,ø3×5mm×0.1mm

AA Screw,ø3×10mm

1 PWB-B

DCEKJV035SJ03

QPWBF3895AFZZ

DCEKS0005SJ03

PWB-C

PWB-D

AC CD Motor (PWB Only)

Video

Thermo Shield Washer,Special Type

SPEAKER BOX PARTS

OTHER SERVICE PART

901

902

903

904

905

906

907

908

909

910

SP1,2

SP3,4

CPNLS1006SJ01

GBOXS0009SJSA

GWAKP1016SJ01

PDUC-0001SJZZ

PGUMM0003SJSA

PSPAG0002SJZZ

QTANA9011SJZZ

TSPC-0221SJZZ

HSY042SPK07

AS Front Panel Ass’y

AZ Box Ass’y

AM Net Flame Ass’y

AE Duct Pipe

AD Net Catcher

AD Gasket

AE Terminal

AD Specification Label

AE Capacitor,3.3 µF,50V (N.P.)

AA Screw,ø4×12mm

AQ Woofer

UDSKA0004AFZZ

AZ CD Pickup Lens Cleaner Disc

XTBSF40P12000

RSPA00005SJ6W

RSPA00004SJ6T

AK Tweeter

ACCESSORIES/PACKING PARTS

————

—

Battery (Not Replacement Item)

QACCA0001SJ00

AS AC Power Supply Cord

[For Saudi Arabia]

AW AC Power Supply Cord

[For Hong Kong]

AH AC Power Supply Cord

[Except for Saudi Arabia/Hong

Kong]

QACCB0001SJ00

QACCE0001SJZZ

QANTL0001SJZZ

QANTW0002SJZZ

QCNWH0005SJ01

QPLGA0250AFZZ

AK AM Loop Antenna

AH FM Antenna

Speaker Cord

AF AC Plug Adapter [For Malaysia/

Philippines]

QPLGA0253AFZZ

AE AC Plug Adapter

[For Saudi Arabia]

SPAKA0058SJZZ

SPAKA0059SJZZ

SPAKA0068SJZZ

AE Packing Add.,Left

AE Packing Add.,Right

Packing Add.,Speaker

[Top/Bottom]

SPAKC0178SJZZ

SPAKS0003SJZZ

SPAKZ0008SJZZ

SPAKZ0030SJZZ

SPAKZ0040SJZZ

SPAKZ0064SJZZ

SSAKA0002SJZZ

TGANE0002SJ15

TINSZ0103SJZZ

Packing Case

Sleeve Carton,Speaker

Polyethylene Bag,Speaker

AC Pad,Accessories

AD Pad

AC Polyethylene Bag,Unit

AE Polyethylene Bag,Accessories

Warranty Card [For Philippines]

Operation Manual [Except for

Thailand]

TINSZ0113SJZZ

TLABE0105SJZZ

Operation Manual [For Thailand]

Label,Bar Code [For Union of

Arab Emirates/ Hong Kong/

Thailand/ Philippines]

AB Label,Hong Kong

Label,Rated Input

TLABG0001SJZZ

TLABG0044SJZZ

[For Hong Kong]

TLABM0044SJZZ

TLABN0140SJZZ

TLABZ0009SJZZ

AB Label,MP-3

Label,Serial No.

AD Label,Made in China

[For Syria]

TLABZ0010SJZZ

TLABZ0011SJZZ

TLABZ0012SJZZ

AD Label,Made in China

[Except for Syria]

AD Label,SHARP Japan [For Syria/

Union of Arab Emirates]

AC Label,SHARP Corporation JAPAN

[For Syria/Union of Arab Emirates]

TLABZ0015SJZZ

TLABZ0019SJZZ

TLSTS0004SJZZ

AC Label,VJ No.

AC Label,M-I-C

AB Service Station List

[For Saudi Arabia]

Z-SER-NO-LIST

RRMCG0030SJSA

GCABB1064SJSA

AC List,Serial No.

Remote Control

Battery Lid,Remote Control

Download from Www.Somanuals.com. All Manuals Search And Download.

– 6 –

XL-3000V

305

703

308

308-2

304

703

308-1

308-3

701

302

301

704x2

303

702x2

NM802

307x2

306x2

NM801

NSW801

PWB-C

Figure 7 CD MECHANISM EXPLODED VIEW

Download from Www.Somanuals.com. All Manuals Search And Download.

– 7 –

XL-3000V

601x2

222

206

604

219

M801

228

207

200

225

224

231x2

229

604

607

PWB-A6

618

226

220

605x2

223

PWB-A5

604x1

619

218

212

239

208

204

214

604

221

209

203

238

611

249

PWB-A7

234

235

236

PWB-A3

250

602

620x4

604x2

603

247

PWB-A8

217

PWB-B

246

604x2

PWB-A2

Silicon

Grease

233

611

213

603

609x4

PWB-A8

612x2

611

242

Silicon

Grease

241

611

611x2

PWB-D

Silicon

615x2

T651

215

Grease 611

210

616x3

611

613x2

610x3

615x2

211

232

205

622

237x6

615x3

245

252

243

611x7

611x2

248

251

PWB-A4

M802

617x2

202

612x2

244x2

PWB-A1

623x2

201

216

610

608x8

606x2

240

621

613

230x2

Figure 8 CABINET EXPLODED VIEW

Download from Www.Somanuals.com. All Manuals Search And Download.

– 8 –

XL-3000V

908

902

SP3,4

910x2

907

909

SP1,2

910x4

Tweeter

SP3 (L-CH)

SP4 (R-CH)

901

Black

Capacitor

906

904

909

White Line

905x2

Black

Woofer

SP1 (L-CH)

SP2 (R-CH)

Tweeter

Capacitor

3.3µF,50V

(N.P)

903

SP3 (L-CH)

SP4 (R-CH)

909

Woofer

SP1 (L-CH)

SP2 (R-CH)

905x2

Figure SPEAKER EXPLODED VIEW

2001 BY SHARP CORPORATION

SHARP CORPORATION

AV Systems Group

Audio Systems Division

No part of this publication may be reproduced,

stored in a retrieval system, or transmitted in

any from or by any means, electronic, mechanical,

photocopying, recording, or otherwise, without

prior written permission of the publisher.

Higashihiroshima, Hiroshima 739-0192, Japan

Printed in Japan

A0108-1009SS•HA•C

Download from Www.Somanuals.com. All Manuals Search And Download.

Sennheiser Headphones SH 300 User Manual
Sharp CRT Television 25N M100 User Manual
Sony Camera Accessories EX480CP User Manual
Sony Stereo Amplifier TA AV571 User Manual
Sony Webcam VPCP11 User Manual
Sprint Nextel Games Play Multiplayer Games User Manual
Stanton Musical Instrument RM404 User Manual
Sub Zero Refrigerator Built In Refrigeration User Manual
Sylvania CRT Television 6427FD User Manual
Sylvania TV VCR Combo 6720FDF User Manual