Thank you for purchasing this SHARP product.
For the best performance, read this manual carefully.
It will guide you in operating your SHARP product.
PORTABLE MINIDISC
RECORDER
MODEL
-
MD MT877H
OPERATION MANUAL
If you require any advice or assistance regarding
your Sharp product, please visit our web-site
Customers without internet access may telephone
08705 274277 during office hours (or (01) 676 0648
if telephoning from Ireland).
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Important Introduction
Useful Features
Special Notes ................................................ 4-5
Precautions .......................................................6
Names of Controls and Indicators .............. 7-9
Battery Charger .........................................10-11
Advanced Playback.................................. 27-29
Advanced Recording ............................... 30-35
Recording from a Microphone ................ 36-38
Checking Displays ................................... 39-40
Changing Default Settings ...................... 41-42
Power Source
Using with the Rechargeable Battery ..... 12-13
Using with the AC Adaptor ............................14
Using with the Alkaline Battery .....................15
Advanced Features
Titling a MiniDisc ...................................... 43-47
Editing a Recorded MiniDisc ................... 48-50
Listening to a MiniDisc Through a Stereo
System or a Car Stereo ................................51
Preparation
Hold Function .................................................16
Inserting a MiniDisc .......................................17
Connections.............................................. 18-19
References
Other Features and Caution ..........................52
MiniDisc System Limitations.........................53
Error Messages ........................................ 54-55
Troubleshooting ....................................... 56-57
Maintenance....................................................57
Specifications ........................................... 58-59
Basic Operation
Recording.................................................. 20-23
Playback .................................................... 24-26
TERMS OF GUARANTEE .............. Back cover
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Notes
Warnings
NOTES FOR USERS IN THE U.K. AND
IRELAND
● The supplied AC adaptor contains no user serviceable
parts.
Never remove covers unless qualified to do so. It con-
tains dangerous voltages, always remove mains plug
from the main outlet socket before any service opera-
tion or when not in use for a long period.
SERVICE INFORMATION
In the unlikely event of your equipment requiring re-
pair, please contact the dealer or supplier from whom
it was purchased. Where this is not possible, please
Customers without internet access may telephone
08705 274277 during office hours (or (01) 676 0648
if telephoning from Ireland).
● TheAC adaptor supplied with the MD-MT877H must not
be used with other equipment.
● To prevent fire or shock hazard, do not expose this ap-
pliance to dripping or splashing liquids.
No objects filled with liquids, such as vases, shall be
placed on the apparatus.
● Never use an AC adaptor other than the one specified.
Please note; all calls will be charged at local rate.
Otherwise, problems or serious hazards may be created.
Certain replacement parts and accessories may be
obtained from our main parts distributor.
WILLOW VALE ELECTRONICS LTD.
0121 766 5414
Cautions
n
● When recording important selections, make a prelimi-
nary test to ensure that the desired material is properly
recorded.
In the unlikely event of this equipment requiring re-
pair during the guarantee period, you will need to
provide proof of the date of purchase to the repairing
company. Please keep your invoice or receipt, which
is supplied at the time of purchase.
● SHARP is not liable for damage or loss of your record-
ing arising from malfunction of this unit.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
SppeecicaliNaoltNeso:tceosntinued
● At full volume, prolonged listening to a personal stereo
● It is not recommendable to put the MiniDisc into a rear
may damage the user’s hearing.
pocket, as this may damage the product when sitting.
This model complies with the law if used with the correct
earphones (model number RPHOH0176AFSA).
If the earphones are damaged in any way, please order
using the model number given above.
● Use the Portable MiniDisc Recorder only in accordance
with the instructions given in this manual and do not at-
tempt to interfere with the interlock switch or make any
other adjustment as this may result in exposure to haz-
ardous radiation.
Notes
● Recording and playback of any material may require
consent, which SHARP is unable to give. Please refer
particularly to the provisions of the Copyright Act 1956,
the Dramatic and Musical Performers Protection Act
1958, the Performers ProtectionActs 1963 and 1972 and
to any subsequent statutory enactments and orders.
● This equipment complies with the requirements of
Directives 89/336/EEC and 73/23/EEC as amended by
93/68/EEC.
n
● US and foreign patents licensed from Dolby Laborato-
ries.
● The letters in brackets contained in the model number
indicate the colour of the product only. Operation and
specifications are unaffected.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
Important
Storing the unit
Avoid using or leaving the unit in the following places.
● Do not wear your earphones when you are crossing
streets or near traffic.
● Places exposed to direct sunlight
for many hours (especially in cars
with the doors and windows
closed) or near heaters.
● Do not use your earphones whilst
driving a motor vehicle, it may create a
traffic hazard and may be illegal.
Remember to obey all of the safety rules
in your area.
(The cabinet may deform, change
colour or the unit may malfunction.)
● Do not play the unit at a high volume.
Hearing experts advise against ex-
tended listening at high volume levels.
● If you experience ringing in your ears, reduce the vol-
ume or discontinue use.
● No naked flame sources, such as lighted candles, should
be placed on the apparatus.
● Places exposed to water.
● Places exposed to excessive dust.
● Places where temperatures are ex-
cessively high or low.
● Places (bathrooms) where the hu-
midity is extremely high.
● Attention should be drawn to the environmental aspects
● Places with strong magnetic
fields such as TVs or loud-
speakers.
of battery disposal.
● The apparatus is designed for use in moderate climate.
● This portable MD should only be used within the range
of 0°C - 40°C (32°F - 104°F).
● Places exposed to vibration.
To avoid accidental electric shock or other possible
problems, observe the precautions listed below.
● Do not disassemble or modify the unit.
● Do not drop or subject the unit to shock.
● Do not use the unit near open flames.
● Do not spill liquid on the unit.
● Places where sand can easily en-
ter the inside of the unit (beaches
etc.).
I
● If the unit is used near radio tuners or TVs, noise and/or
picture interference may result. If you experience these
problems, move the unit away from such devices.
● Do not use an external power supply, other than the 5V
DC supplied with this unit, as it may damage it.
●
SHARP is not responsible for damage due to improper use.
Refer all servicing to a SHARP authorised service centre.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Names of Controls and Indicators
Main unit
1. Record/Track Mark Button (20, 34)
2. Mode Button (29, 31, 41)
8
4
3
9
2
3. Volume/Cursor/Fast Forward/Fast Reverse/
Recording Level/Name Select Button
(20, 24, 27, 30, 41-45)
1
10
4. Stop/Power Off/Hold Button (16, 20, 24, 41)
5. Open Lever (17)
6. Display/Character Select Button (39, 40, 43)
7. Edit/Auto Mark/Time Mark Button (34, 38, 43-50)
8. Play/Pause Button (20, 24)
9. Enter/Fast Play/Synchro Button (28, 43-50)
10. Bass/Delete Button (24, 45)
11. Rechargeable Battery Cover (12)
12. Handstrap Holder
5
6
7
11
13. Optical/Line Input Socket (18, 19)
14. Microphone Input Socket (36)
15. Remote Control/Earphones/Line Output Socket(24)
o
15
14
13
12
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Names of Controls and Indicators (continued)
Main unit display panel
01. Level Meter
02. Record Indicator
03. Synchro Recording Indicator
04. Operation indicator
05. Long-play/Recording mode indicator
6. Character/Time Information Indicator
7. Repeat Indicator
8. Battery Indicator
9. Random Indicator
1
2
3
4
5
6
7
8
9
10
11
12
10. Track Number Indicator
11. TOC Indicator
12. Disc Name Indicator
3-colour LED
Various modes are indicated with three colours of lights.
Yellow-
green Blue Orange
Charging
Refresh
Lighting starting with yellow-green light.
Extinguishing starting with orange light
after all the lights are lit.
Playback
Flashing the colour of the activated
playback mode.
Recording
Flashing the colour of the activated re-
cording mode.
o
Fast Forward Flashing starting with yellow-green light.
Fast Reverse Flashing starting with orange light.
Volume (+)
Volume (–)
Lighting starting with yellow-green light.
Extinguishing instantly starting with or-
ange light after all the lights are lit.
TOC
Reading: flashing at random.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Names of Controls and Indicators : continued
Remote control unit
1. Earphones Socket (24)
2. Fast Forward/Fast Reverse Button
3. Display Button
4. Play Mode Button (29)
5. Sound/Track Mark Button (26, 34)
6. Stop/Power Off Button (22, 26)
7. Play/Pause Button
1
6
2
3
4
5
8. Volume Button
9. Hold Switch (16)
7
9
8
Remote control display panel
01. Record Indicator
02. Track Number Indicator
03. Operation indicator
04. Character/Time Information Indicator
05. Battery Indicator
06. Random Indicator
07. Synchro Recording Indicator
08. Total Track Number Indicator
09. Long-play/Recording mode indicator
10. Repeat Indicator
4
1
2
3
5
9
6
o
7
10
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Charger
There are two different ways to use the battery charger one is to use it as a normal battery charger, the
other is to use it with an AC adapter by attaching the portable MD to the battery charger.
Names
Setting
2
Charge
mode
Face the top
toward you.
3
3
1
4
CHARGE
1
CHARGE
2
OPERATION
OPERATION
4
5
6
I
1. Remote Control Holder (11)
Caution:
(You can hang the remote control on it.)
2. Lock Detector
3. Hook For Fixing The Main Unit
4. Charge/Operation Switch (10, 11)
5. Stand
● Before setting the portable MD to the battery charger, make
sure the battery charger is in charge mode (CHARGE). If you
insert the portable MD by force whilst in operation mode
(OPERATION), the hook for fixing the portable MD may break.
● Operating whilst in charge mode, “CHARGEmode” will appear
6. AC Adaptor Connecting Socket (18, 19)
and no operation is possible.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
About the Battery Charger : continued
Setting the battery charger and hanging the
remote control.
How to use the Charge / Operation switch
Charge
mode
For charging
When the remote control is not used, hang it on the holder
for your convenience.
Move it to charge mode (see
“Using with the Recharge-
able Battery” page 12).
(RELEASE)
For operations
Operation
mode
Move it to operation mode
when playing back or record-
ing (see “Using with the AC
Adaptor” page 14).
(LOCK)
Removing
For use with the AC adaptor.
When using the unit with AC adaptor, use it horizontally.
Do not stand the unit.
2
n
1
Charge
mode
(RELEASE)
● Move the Charge / Operation switch to charge mode.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Using with the Rechargeable Battery
Charging
Do not force the
When the rechargeable battery is used for the first time
or when you want to use it after a long period of disuse,
be sure to charge it fully.
battery cover
open too far.
1
2
Insert the rechargeable battery.
Move the Charge/Operation switch to charge
mode.
3
Place the portable MD into the battery charger
and connect the AC adaptor.
● After the rechargeable battery is charged or used, it will get
slightly warm. This is normal.
● When the portable MD is turned on or operating, the battery
will not be charged.
PwoerSource
Charge
mode
AC 230-240V
50/60Hz
To the DC IN
5V socket
12
Download from Www.Somanuals.com. All Manuals Search And Download.
About Power Source : continued
About the liquid crystal display (LCD)
About charging time
The condition of the portable MD will be shown on the LCD
when inserting it into the battery charger.
After about 3.5 hours have passed, “
The battery is charged up to 95% if it is completely
discharged.
” will go out.
Display
Conditions
● Charging.
Notes:
● Charge the battery within the range of 5°C - 35°C (41°F
- 95°F).
● The unit can be left in the charging state after it is com-
Scrolling
pleted.
● If the MiniDisc unit is not to be used for some time,
remove the battery. (The battery drains gradually even
when the power is turned off.)
● The charging is complete.
● When the portable MD is not in-
serted correctly to the battery
charger, or
● Carry the battery in the supplied case.
Turns off
Rechargeable terminal is dirty, it
may not be possible to charge the
battery. (Wipe the terminal by cot-
ton swab.)
Caution:
● Use the specified batteryAD-N55BT only. Do not charge
a battery (nickel-cadmium, alkaline, etc.) other than that
specified.
PowerSource
● Do not remove the outer cover of the re-
chargeable battery. It may cause heat gen-
eration, fire, or explosion.
● Do not dip the battery in water, do not dis-
pose of it in a fire, and do not take it apart.
● If the rechargeable battery terminal is dirty, charging may
● Refreshing (see page 41).
The unit checks and, if necessary,
discharge the rechargeable bat-
tery to recharge it automatically.
(At this time battery indicator is
flashing.)
not start. In such a case, wipe off the dirt with a dry cloth.
● Do not disassemble the battery.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Using with the AC Adaptor
1
2
3
Place the portable MD to the battery
charger.
Move the Charge/Operation switch to
operation mode.
Plug the AC adaptor.
Operation mode
Caution:
To the DC IN
5V socket
● If the Charge/Operation switch is not set to operation
mode, no operation is possible.
(See “How to use the Charge/Operation switch”, page 11)
● When the unit is not in use for extended periods, re-
move the AC adaptor from the wall socket.
● Insert the plugs firmly.
PwoerSource
Note:
When power failure occurs whilst playing back using the
AC adaptor, disconnect the adaptor from the outlet. Other-
wise, playback may start automatically when the power
returns.
AC 230-240V
50/60Hz
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Using with the Alkaline Battery
Use one commercially available alkaline battery (LR6, “AA”
size).
When using the alkaline batteries, make sure the recharge-
able battery is inserted.
2
Open
1
2
Open the case cover.
1
Press
Insert a alkaline battery into the battery
case.
3
Attach the battery case to the portable MD.
Caution:
● Do not use rechargeable batteries (nickel-cadmium
battery etc.) in the battery case.
Back of the
portable MD
PowerSource
RELEASE
LOCK
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Hold Function
The present operation condition can be kept even if other buttons are accidentally pressed in a place such
as a crowded train.
Main unit
Remote control unit
Press the • ■ / –HOLD button for 2 seconds
or more.
Move the HOLD switch to the safety position
(direction indicated by the arrow).
Orange mark
Hold
Hold
Release
Perparation
● If the alkaline batteries are inserted or the AC adaptor
is connected, you can set this function even when the
power is turned off.
To cancel the hold mode:
Move the HOLD switch away from the safety posi-
tion (the opposite direction of the arrow).
To cancel the hold mode
Press and hold down for 2 seconds or more whilst the unit
is in the hold mode.
● “HOLD OFF” will be shown
●If the hold function is active whilst the power is
turned off, the power cannot be turned on by
mistake and the battery will not be drained.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting a MiniDisc
1
Slide the OPEN lever to release the com-
partment door.
2
2
3
4
Lift it up.
Insert a MiniDisc as shown.
Close the compartment door.
4
Notes:
1
● Do not place the MiniDisc under the holder.
Preparation
3
When you record on a
MiniDisc, check that the
erase prevention tab is
● If any resistance is felt, do not force the MiniDisc into the
unit, as it may cause damage to the unit. If resistance is
felt, remove the MiniDisc and reload it.
Recordable Recording
set to the “recordable”
prevented
position.
● The lid can not be opened if “TOC” is displayed refer to
the instruction on page 22.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
You can record your favorite CDs or tapes to an MD.
To connect to a stereo system with “AUDIO OUT” or “LINE OUT” sockets
Red : To Right
White : To Left
To the OPTICAL/
LINE IN socket
Perparation
To the
DC IN 5V socket
To a stereo system with “AUDIO OUT” or “LINE OUT”
sockets. (See left, Analogue connection.)
Note:
AC 230-240V
50/60Hz
AUDIO OUT
If the audio system has only one pair of sockets, they are
usually for input only and recording via this connection is not
possible.
RIGHT LEFT
To the wall socket
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections : continued
To connect to a stereo system with a “DIGITAL OUT” or “OPTICAL OUT” socket
To the OPTICAL/
LINE IN socket
Preparation
To the
DC IN 5V socket
To a stereo system with a “DIGITAL OUT” socket.
(See left, Digital connection.)
DIGITAL OUT
AC 230-240V
50/60Hz
Compared to analogue connection recording, it allows
high-quality recording.
Note:
Some audio systems do not have a DIGITAL OUT socket.
Check before connecting.
To the wall socket
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
n
Before Recording
Cancel the hold mode.
The portable MD does not work
whilst in hold mode.
As for the details, see page 16.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording : continued
1
2
Press the REC button.
4
5
Press the PAUSE button on the stereo sys-
tem to enter the playback pause mode at
the point you wish to start recording.
● Record pause mode is entered.
● The REC button does not light.
●
Here you can select the track to be recorded.
Begin playback on the stereo system con-
nected to this portable MD.
● To enable the record level to be set.
Press the MODE button repeatedly to se-
lect recording mode.
5
4
(stereo recoding)
3
Press the
or
button to adjust the
recording level.
(2 times long recording)
Analogue recording
● Adjust the recording level so that the maximum
sound volume from the source makes the read-
ing swing somewhere between –4 dB and 0 dB.
(4 times long recording)
(monaural recording)
Level meter indicator
6
7
Press the 06 button to start the MiniDisc
0dB
unit recording.
4dB
a
Begin playback on the stereo system, the
output will be recorded.
Digital recording
● You can adjust the level in 1 dB increments within
the range of +12 - –12dB.
Notes:
+12 - –12dB
● When recording, it is recommended to use the AC
adopter and also install the charged battery. Should the
power failure occur, the power source would be auto-
matically switched to the rechargeable battery.
● Changing the volume level whilst recording does not af-
fect the recording.
● Once you adjust the digital recording level, the
setting remains even after the recording stops.
(For cancellation instructions, see page 41.)
● You cannot adjust the bass level whilst recording.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording (continued)
To interrupt recording
About the TOC
Press the 06 button.
After any recording or editing function “TOC” (Table Of
Contents) is displayed. To finalise the recording or editing
function, press the • ■ / :OFF button. During this process
“TOC” will flash and “TOC EDIT!” will be displayed.
During any recording or editing function the MiniDisc unit
Lid is locked, the MiniDisc can not be removed until the
process is finalised.
● The track number will be increased by one each time
the recording is interrupted.
To stop recording
Press the • ■ / :OFF button.
● When recording stops, “TOC” appears (Table Of Con-
tents). Whilst “TOC” appears the MiniDisc recorded
contents have not yet been updated.
● To prevent the new recording from being lost it is not
possible to remove the MiniDisc whilst “TOC” is dis-
played.
Warning
● If the power is removed (Battery/AC adapter) whilst
“TOC” is displayed the MiniDisc unit lid will remain locked
until the battery/main power is restored and the unit is
turned on. Your new recordings or edited changes will
be lost and your MiniDisc may become unusable.
TOC display
Caution:
● Whilst “TOC” or “TOC EDIT!” is displayed, follow the
instructions below.
B
– Do not jerk or bump the unit.
To update the recorded contents of the MiniDisc
Press the • ■/ :OFF button whilst in the stop mode.
● The power turns off after recorded contents have been
updated on the MiniDisc.
– Do not unplug the AC adaptor.
– Do not remove the rechargeable battery or an alka-
line battery.
– Do not subject the unit to shock.
Otherwise, tracks may not be recorded properly.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
To prevent recorded MiniDiscs from be-
ing erased accidentally
Helpful tip when attaching a label
When attaching a label to an MiniDisc cartridge, be sure to
note the following. If the label is not attached properly, the
MiniDisc may jam inside the unit and it may not be pos-
sible to remove it.
Slide the accidental erase prevention tab, located
on the side of the MiniDisc, in the direction indi-
cated by the arrow.
● If the label peels off or partially lifts
away, replace it with a new one.
● Do not put a new label on top of an
existing one.
● The MiniDisc will then be protected against accidental
erasure.
● Attach the label only in the specified
location.
Recordable
Recording
prevented
n
To add a recording to such a MiniDisc, slide the acci-
dental erase prevention tab back to its original position.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Before Playing back
Cancel the hold mode.
The portable MD does not work whilst in hold mode.
Remote control unit
Main unit
Release
As for the details, see page 16.
Right
Left
channel
channel
n
To the socket
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback : continued
To interrupt playback
1
Insert the earphones plug firmly into the
earphones socket on the remote control
unit.
Press the 06 button.
● To resume playback, press the 06 button again.
To stop playback
2
Plug the remote control into the socket
on the unit.
Press the • ■ / :OFF button.
●
If the unit is not operated for at least 2 minutes whilst
in the stop mode, the power will shut off automatically.
3
4
Insert a MiniDisc (page 17).
To turn off the power
Press the 06 button.
Press the • ■ / :OFF button whilst in the stop mode.
● Playback starts automatically with a playback only
MiniDisc or a MiniDisc which is protected against
accidental erasure (Auto-play function).
B
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback (continued)
Notes:
If power failure occurs whilst playing a disc using the AC
adaptor, disconnect it from the wall socket. Otherwise, play-
back may start automatically when electricity resumes.
Volume control
●
Press the VOL+ button to increase the volume and
the press the VOL– button to decrease the volume.
● If you connect the AC adaptor without installing the re-
chargeable battery, playback may start automatically.
Be sure to turn off the power.
Main unit
●
Reduce the volume before starting to play. MiniDiscs, com-
pared to ordinary cassette tapes, have very little noise.
If the volume is adjusted according to your usual expec-
tations of noise, high volume may damage your hearing.
Remote control unit
Volume (0 - 30)
● The sound escaping from your earphones may annoy
people around you.
Bass control
In particularly crowded places (such as on trains or
buses), reduce the volume.
Each time the BASS button is pressed (Remote con-
trol: the SOUND button is pressed), the tone will be
switched as follows.
n
BASS 1
BASS 2
BASS 3
Emphasised slightly
Emphasised more
Emphasised fully
BASS OFF Cancelled
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback
To locate the beginning of a track
To move to the beginning of the next track:
Press the 4 button during playback.
To re-start the track being played:
Press the 5 button during playback.
To locate the next track:
Press the 4 button whilst the unit is stopped.
To locate the previous track:
Press the 5 button whilst the unit is stopped.
To locate the desired portion
● To skip a number of tracks at one time, press the 5
or 4 button repeatedly until the desired track num-
ber is shown.
● When you press the 06 button, play back starts from
the beginning of the track.
For audible fast forward:
Press and hold down the 4 button during play-
back.
s
For audible fast reverse:
Press and hold down the 5 button during play-
back.
● Normal playback will resume when the 5 or 4
button is released.
● When the end of the last track is reached during fast
forward, the unit will enter the pause mode. When
the beginning of the first track is reached during fast
reverse, the unit will enter the playback mode.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback : continued
Intro play
You can listen to each track for approximately 5 sec-
onds.
When stopped, press the 06 button for 2 sec-
onds or more.
When the playback mode is set as random playback,
random repeat playback, or one-track repeat playback,
the intro scan is not possible.
In this case, the playback is started in the normal mode.
The duration that "INTRO PLAY" is displayed is not fixed.
To return to normal playback
U
Press the 06 button
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback : continued
Random play or repeat play
During playback, press the MODE button repeat-
edly to select the playback mode.
RANDOM
Random play
Repeat play of tracks in random order
Repeat play of all of the tracks
Repeat play of a single track
Normal playback
RANDOM
1
No display
To play at double speed (Mono recording only)
Notes:
● If the playback mode is selected whilst stopped, press
Press the ENTER button whilst a MiniDisc recorded
in the monaural long-play mode is being played.
the 06 button to start playback.
● When “TOC” is displayed, random play or repeat play
is impossible.
s
● In random play the unit will select and play tracks auto-
matically. (You cannot select the order of the tracks.)
After all of the tracks have been played once each in
random order, the unit will stop automatically.
● During random, random repeat, or single track repeat
play, you can forward or reverse the MiniDisc only within
the track being played.
● If a track recorded in the stereo mode is reached during
fast playback, the fast playback mode will be cancelled.
● Depending on the contents recorded on a MiniDisc, it
may be difficult to hear them.
To interrupt fast playback
Press the 06 button during playback.
When the 06 button is pressed again, the unit will resume
fast playback.
● During random play, the unit cannot find the beginning
of any track which has been played.
● Repeat play lasts until you stop the unit.
To return to normal playback
Press the ENTER button.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Recording
Playback sound-actuated recording
(Synchronised recording)
1
2
Press the REC button.
Begin playback on the stereo system con-
nected to this portable MD.
Recording automatically starts or pauses by detect-
ing sound from the stereo system (Synchronised
recording).
5
4
3
4
Press the
or
button to adjust the
recording level.
Press the PAUSE button on the stereo sys-
tem to enter the playback pause mode.
(See page 18,19)
● Select the starting point for your recording and
press the PAUSE button.
5
Press the MODE button repeatedly to se-
lect recording mode.
6
7
Press the ENTER button.
Begin playback on the stereo system.
Recording will begin automatically.
U
To interrupt recording:
● When the stereo system is stopped, the unit will enter
the synchro recording pause mode. When playback is
resumed, the recording will be resumed.
● If a silence lasts for 3 seconds or more, the recording
will be paused (Pause function does not work for
approximately 10 seconds after a recording starts).
● When the unit receives sound again, recording automati-
cally starts.
●
A new track number is created when the recording resumes.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Recording : continued
Long-play recording
1
When a recording is paused, press the
MODE button repeatedly to select the re-
cording mode.
Each time the button is pressed, the display will
change as follows:
2 times and 4 times long recording
Double or quadruple time of stereo recording is
possible.
Monaural recording
In monaural, you can record twice as long as the
stereo recording (SP/STEREO).
A track recorded in monaural can be played back in
double speed, see page 28.
stereo recoding
2 times long recording
4 times long recording
monaural recording
2
Start recording.
U
The recording mode remains unchanged until it is changed.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Recording (continued)
Notes:
Caution for 4 times long recording (LP4)
● Tracks can be recorded in stereo recording mode, 2 times
long recording mode, and 4 times long recording mode
on one MiniDisc.
● In monaural recording, the sound on the right and left
channels is mixed even if the input source is in stereo.
Although you can hear the stereo sound from the head-
phones, the recorded sound is monaural.
Special compressing method allows the 4 times long re-
cording to realize long-time stereo recording. Therefore,
some noise is recorded occasionally.
If the stress should be laid on the sound quality, stereo
recording or 2 times long recording is recommended.
● Tracks recorded in 2 times long recording and 4 times
long recording modes cannot be played with the unit that
does not support these modes. On such a unit, “LP” is
displayed at the beginning of the track and no sound is
heard. (The operation and the display may vary depend-
ing on the unit.)
About ATRAC
The ATRAC (Adaptive TRansform Acoustic Coding) sys-
tem compresses the sound data into 1/5 by cutting out the
inaudible sound.
Since the sound is selected based on psychoacoustics
masking, the sound quality is not damaged.
This unit is equipped with the ATRAC3 compressing sys-
tem that reduces the sound data into 1/10 or 1/20.
By employing this system, 2 times and 4 times long re-
cording is enabled in stereo mode.
● Tracks recorded in monaural cannot be played if equip-
ment does not support the monaural playback.
About the recording mode
You can select the recording mode from stereo recording,
2 times long recording, 4 times long recording, and mon-
aural recording. Recordable time varies depending on the
recording mode.
s
If the tracks are recorded on 80-minute MiniDisc, you can
record them in the following 4 modes:
Indication
Recording mode
Recording time
Max. 80 min.
SP/STEREO Stereo
LP2 REC
LP4 REC
SP/MONO
2 times long (stereo) Max. 160 min.
4 times long (stereo) Max. 320 min.
Monaural
Max. 160 min.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
During playback, press the
point where you want to begin recording.
0
6
button at the
Advanced Recording (continued)
To start recording from the middle of a track
You can erase a portion of a track and make a new
recording.
● All of the tracks that follow the newly recorded track will
Press the REC button.
be erased.
● To cancel the operation, press the • ■ / :OFF button.
3
Press the ENTER button.
● All of the tracks and track names will be erased,
following the point where the playback is paused.
4
5
Press the MODE button repeatedly to se-
lect recording mode.
s
Press the 06 button.
● Recording will start.
Note:
● To keep a track after the point you want to make a new
recording, move the track and then make recording af-
ter that point.
(See “Editing a Recorded MiniDisc”, page 50.)
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Recording : continued
When “AUTO MARK” is selected;
If there is silence for 1 second or more, the track will be
numbered automatically.
About 1
second
Silence
First
track
Second
track
When “MARK OFF” is selected;
It will be recorded as one track.
First track Second track Third track
Playback
side
Track A
Track B
Track C
Automatic numbering (in analogue recording)
First track
Track A
Recording
side
You can record several pieces of music as a single
track by disabling the auto marker function. (Initial
setting is “AUTO MARK.”)
Track B
Track C
s
Manual numbering
When a recording is paused or whilst recording…
You can create your own track numbers at any point.
Press the EDIT button.
Whilst recording, press the REC button at the
point where you want to create track numbers.
The track number will be increased by one.
● One track number will be created every time the REC
button is pressed.
Note:
●
When making digital recordings using a CD player or an
MiniDisc player, track numbers will be created automati-
cally regardless of the setting of the auto marker function.
● The SOUND button on the remote control can also be
used to create track numbers.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Recording (continued)
Numbering restriction
About sampling rate converter
If you try to number more than 10 tracks in certain amount
of time, “SORRY” will be displayed and the operation will
be disabled.
This portable MD incorporates a sampling rate converter
meaning it can record from digital radios or DAT tape re-
corders.
In that case, wait until the next operation can be resumed.
In stereo recoding
Within 40 seconds
Within 80 seconds
Within 160 seconds
Within 80 seconds
In 2 times long recording
In 4 times long recording
In monaural recording
Note for digital recording
You can not copy a MiniDisc that you recorded from digital
inputs to another MiniDisc or DAT. It is prevented by the
SCMS (Serial Copy Management System). Recording from
analogue inputs is not affected.
Automatic numbering (in digital recording)
When recording from a CD or a MiniDisc using the digital
connection, track numbers will be created at the same points
as on the CD or MiniDisc (Synchro marker function).
Digital signals
Digitally recorded
MiniDisc
Cannot record
First track Second track Third track
Playback
Track A
Track B
Track C
side
CD player,
MiniDisc
player,
First track Second track Third track
Recording
side
etc.
Track A
Track B
Track C
s
Digital
connection
Digital
connection
● Track numbers may not be created in proper places,
depending on the source to be recorded from, such as
signals with noise.
● The track numbers on the playback side may not match
the track numbers recorded on the MiniDisc.
● When recording, if a programmed playback is performed
by the source or playback is performed by selecting
tracks manually, the MiniDisc track numbers may not be
the same as on the source.
● Track numbers may not be created properly, depending
on the connected stereo system.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording from a Microphone
To record from a microphone
3
4
Press the REC button.
5
4
Press the
or
button to adjust the
recording level.
Level meter
0dB
4dB
● Adjust the recording level so that the maximum
sound volume from the source makes the reading
swing somewhere between –4 dB and 0 dB.
5
6
Press the MODE button repeatedly to se-
lect recording mode.
Press the 06 button.
● Recording will start.
To the MIC IN
socket
s
To interrupt a recording
Stereo microphone
(commercially available)
Press the 06 button whilst recording.
● To resume recording, press the 06 button again.
The track number will be increased by one each time
you interrupt a recording.
To stop recording
Press the • ■ / :OFF button.
1
2
Connect a stereo microphone to the MIC
IN socket.
To write recorded contents on the MiniDisc
Press the • ■ / :OFF button whilst in the stop mode.
Insert a recordable MiniDisc (page 17).
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording from a Microphone (continued)
About pause function
Sound-actuated recording
The unit automatically pauses when the microphone does
not pick up any sound for 3 seconds or more. (Pause func-
tion does not work for approximately 10 seconds after a
recording starts.) When the microphone picks up sound
again, recording starts automatically.
(Mic Synchronised recording)
1
2
Press the REC button.
5
4
Press the
or
button to adjust the
Notes:
recording level.
● Whilst making a mic recording, do not connect anything
to the OPTICAL/LINE IN socket on the portable MD.
● To use a microphone, be sure it is a plug-in-power type
microphone.
Level meter indicator
0dB
4dB
•
When a plug-in-power type microphone is plugged
in, the portable MD will provide power for the micro-
phone’s operation.
3
4
Press the MODE button repeatedly to se-
lect recording mode.
•
If a different type of microphone is plugged in, it may
not operate properly or it may cause the unit to mal-
function.
● Insert the plug firmly. If you don’t, the recording will not
be made properly.
Press the ENTER button to select the re-
cording sensitivity.
s
MIC SYNC H : Recording starts when the unit
detects –24 dB or more
● Use a microphone with a 3.5 mm (1/8") diameter stereo
mini plug.
● If the unit starts recording too often from low unwanted
noises, set the microphone input to “MIC SYNC L”.
● Recording sensitivity can be changed whilst recording.
(The unit can start recording from
quiet sounds).
MIC SYNC L : Recording starts when the unit
detects –12 dB or more.
5
When a sound, such as person speaking,
is picked up by the microphone, recording
will begin automatically.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording from a Microphone : continued
Example: Set to “5 minutes”.
Track intervals
During a mic manual recording
When recording from the microphone, track num-
bers will be created automatically at regular inter-
vals (default setting: approximately every 5 minutes).
During a mic synchro recording, the unit pauses
when a silence lasts for 3 seconds or more, and cre-
ates a track number.
● Timed auto marks will be created every 5 minutes.
Track
number 1
Track
number 2
Track
number 3
Track
number 4
5 minutes
5 minutes
5 minutes
Changing intervals between tracks
During a mic synchro recording
If a silence lasts for 3 seconds or more, a timed auto mark
will be created 5 minutes after the previous mark is created.
1
When a recording is paused or whilst re-
cording, press the EDIT button repeatedly.
: Track number which is created by the timed auto mark function.
: Track number which is created when a silence lasts for 3 sec-
onds or more during synchro recording.
(No automatic track
numbers are created.)
(A new track number is
created every 3 minutes.)
Track
Track
Track
Track
Track
number 5
number 1 number 2
number 3 number 4
s
(A new track number is
(A new track number is
created every 10 minutes.)
created every 5 minutes.)
2 minutes 5 minutes 1 minute 5 minutes
● The interval between marks may vary slightly com-
pared with the actual recording time.
2
Track numbers will be created automati-
cally at regular intervals.
Creating track numbers manually
Press the REC button whilst recording.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking Displays
To check the elapsed time and remaining
time of the track
To check the remaining recording time
and the total playing time
During playback, press the DISP button.
Each time the button is pressed, the display will change as
follows:
Whilst in the stop mode, press the DISP button.
Each time the button is pressed, the display will change as
follows:
Disc name
Total playing
time
Track name
Elapsed playback
time
Remaining
recording time
Remaining
U
Total playing
time
playback time
Notes:
● Remaining time of recording varies depending on the
set recording mode.
● If the disc name or the track name was not originally
recorded on the MiniDisc, “NO NAME” will be displayed.
● Remaining recording time will not be displayed with a
playback only MiniDisc.
● Elapsed playback time and remaining playback time may
● If the remaining time of recording is over 100 minutes,
the first digit of the seconds is not displayed on the re-
mote control.
be different from the actual time.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking Displays : continued
To display the playing time of an indi-
vidual track
Checking the remaining amount of
battery level
The remaining amount of battery level is shown
by the battery indicator (
) during operation.
5
or
1
2
Whilst in the stop mode, press the
4
track name.
How to read the battery indicator
button to display the track number and
Track number
Track name
When the battery
level is very low
When the battery
level is high
● When the battery is completely discharged, the battery
indicator will flash. Recharge the battery or replace the
alkaline battery with a new one.
● When the battery has run completely out, “BATT EMPTY
(LoBATT)” will appear. Then, the power will be discon-
nected automatically.
Press the DISP button to display the play-
ing time for that track.
s
Notes:
● If you use the battery which you stopped charging half-
way, “
” may appear. It does not mean that the bat-
Playing time
tery is completely charged.
● The battery indicator will not correctly display the remain-
ing capacity for approximately 20 seconds after the power
has been turned on.
● When theAC adaptor or a separately available car adap-
tor is used, the battery indicator will not be shown.
● Each time the 5 or 4 button is pressed, the
playing time of the previous or next track will be
displayed.
● The number of bars shown in the battery indicator may
increase or decrease, depending on the operation be-
ing performed. This is normal.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing Default Settings
Whilst in the stop mode ...
MENU
SETTING ITEM
1
With a MiniDisc inserted, press the MODE
button for 2 seconds or more. “SET UP”
will appear.
BEEP ON
confirmation
sound
BEEP ON*
BEEP OFF
Beep
Silent
●
When you release the button, “BEEP ON” or “BEEP
OFF” will appear.
A-PLAY ON
auto play
A-PLAY ON*
A-PLAY OFF
Setting
Cancelled
5
4
2
Press the
menu.
or
button to display the
AUTO Psave
auto power save
AUTO Psave* Setting
Psave OFF
Cancelled
D.L MODE 1
digital recording
level
D.L MODE 1*
D.L MODE 2
Psave OFF
Setting keep
Cancelled
Cancelled
3
4
Press the MODE button to switch items.
LIGHT NORM
3-colour LED illu-
mination
LIGHT NORM* See next
s
LIGHT ALL
LIGHT OPER
LIGHT OFF
page.
Press the • ■ / :OFF button.
backlight on the
remote control
display on the
remote control
(*) indicates default setting.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing Default Settings : continued
Beep sound
Operation indicator, backlight on the remote
control and display on the remote control
You can eliminate the confirmation sound that beeps
when you press a button.
The illuminating pattern of the 3-colour LED and the
remote control can be changed.
Auto play
You can make the unit not play automatically when
you insert a playback-only MiniDisc or an accidental
erasure protected MiniDisc.
LIGHT NORM:
• 3-colour LED
Indication lamp is flashing.
• Backlight on the Lit for approx. 10 seconds when operated.
remote control
• Display on the Indicated
remote control
Auto power save
When the unit is used in a place exposed to much vibra-
tion, sound skipping can be decreased by cancelling
the auto power save function. (Battery will drain faster.)
LIGHT ALL:
• 3-colour LED
Indication lamp is lit.
• Backlight on the Lit for approx. 10 seconds when operated.
remote control (Lit when operated on the battery charger.)
• Display on the Indicated
Digital recording level
“D.L MODE 1”
The digital recording level you set will be kept even
after canceling recording.
remote control
LIGHT OPER:
“D.L MODE 2”
•
3-colour LED
Lit for approx. 10 seconds when operated
during playback or recording.
Every time you cancel recording, the level will re-
turn to [ D.L 0dB ].
U
• Backlight on the Lit for approx. 10 seconds when operated.
remote control
What is auto power save function?
Auto power save function automatically adjusts the sound
skip memory storage to be from 5 to10 seconds depending
on playback conditions, this saves battery power.
• Display on the
remote control
Lit for approx. 10 seconds when operated.
LIGHT OFF:
• 3-colour LED
If the MiniDisc unit is used in areas of much vibration it may
be necessary to fix the sound skip memory to 10 seconds
“Psave OFF (PS off)” this will improve performance under
difficult conditions but uses more power. (When the AC/car
adaptor is used the 10 second mode is always used.)
The light is not turned on.
• Backlight on the The light is not turned on.
remote control
• Display on the
remote control
Lit for approx. 10 seconds when operated.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Titling a MiniDisc
Creating disc and track names
3
Press the DISP button repeatedly to select
the type of characters.
Load a MiniDisc to be named. A Playback-only or record-
ing-prevented MiniDisc cannot be edited.
Disc name
Track name
1
Whilst in the pause Whilst in the pause
mode with “DISC” dis- mode, press the EDIT
played, press the EDIT button repeatedly to
button repeatedly to select “TRACK NAME”.
select “DISC NAME”.
(Capital letters) (Lower-case letters) (Numbers and symbols)
● The first 3 characters in the group of the selected
characters will be displayed for about 1 second.
5
4
4
Press the
or
button repeatedly to
select the letter.
If “DISC” is not dis-
played, you cannot se-
lect “DISC NAME.”
“DISC” is displayed
when the • ■ /:OFF is
pressed once.
5
6
Press the ENTER button to enter it.
s
2
Press the ENTER button.
Position where the next letter will be entered
Cursor
To enter more letters, repeat steps 3 - 5.
● The unit will enter the character input mode.
● The MiniDisc lid will be locked, to cancel the
operation, press the • ■ / :OFF button.
Continued to the next page
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Titling a MiniDisc (continued)
To erase a character
7
When the name has been completely en-
tered, press the EDIT button.
Press the VOL + or VOL – button to move the cursor to the
character you want to erase, and then press the BASS
button.
8
TOC will be displayed to write the updated
contents to the MiniDisc press the • ■/ :OFF
button.
To enter a space
Press the VOL + button to move the cursor to the right.
● You cannot remove the MiniDisc whilst TOC is
displayed. TOC will not disappear until the re-
corded contents have been updated.
Space
Characters (symbols)
Note:
One disc name and up to 255 track names can be created
per disc (A maximum of 100 characters for the disc and
each track name and a total of 1,700 characters can be
entered. However, if any tracks are recorded in the 2 times
or 4 times long recording mode, the number of characters
to be entered is decreased, since the information of the
recording mode is stored by the track.).
Capital letters
A
P
B
C
R
D
S
E
T
F
G
V
H
I
J
K
Z
L
M
,
N
/
O
o
.
Q
U
W
X
Y
Lower-case letters
A
a
p
b
q
c
r
d
s
e
t
f
g
v
h
i
j
k
z
l
m
,
n
/
.
u
w
x
y
Numbers and symbols
1
&
?
2
'
3
(
4
)
5
6
+
7
,
8
–
9
0
/
!
:
"
;
#
<
$
=
%
>
.
*
_
`
@
: indicates a space.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Titling a MiniDisc : continued
To add characters
5
6
Press the EDIT button.
1
2
Put the unit in the character input mode.
(Perform steps 1 - 2 on page 43.)
Press the VOL + or VOL – button to move the
cursor to the right of the character, where you
want to add a new character.
TOC will be displayed to write the updated
contents to the MiniDisc press the • ■/ :OFF
button.
● You cannot remove the MiniDisc whilst TOC is
displayed. TOC will not disappear until the re-
corded contents have been updated.
3
4
Select the character to add.
(Perform steps 3 - 4 on page 43.)
r
Press the ENTER button.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Titling a MiniDisc (continued)
Stamping titles from another MiniDisc
Before stamping
Master MiniDisc operation
Insert a Master MiniDisc.
When there are 2 MiniDiscs on which the same tracks
are recorded, you can transfer the character information
(disc and track names) of the Master MiniDisc to another
MiniDisc (for stamping).
1
● Do not mistake the Master
MiniDisc for the target one.
● If you turn off the unit after
inserting the master MD, the
operation from step 2 may
not allow the unit to stamp
the titles correctly.
1. What is a master MiniDisc?
A recordable MiniDisc that contains tracks and char-
acter information.
(You can not transfer the information from a play-
back only MiniDisc.)
2
3
Whilst in the stop mode, press the EDIT but-
ton repeatedly to select “NAME STAMP”.
2. What is a MiniDisc for stamping?
c
A MiniDisc that contains the same tracks in the same
order as the master MiniDisc.
(Make sure that the total number of tracks of the
master MiniDisc and the one for stamping are the
same.)
Press the ENTER button.
● To cancel the operation, press the • ■ / :OFF button.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Titling a MiniDisc : continued
4
Press the ENTER button.
7
Press the ENTER button.
● The unit will finish recording the character infor-
mation and enter the stop mode.
5
When the unit displays “CHANGE MD”,
remove the master MiniDisc.
● Remove it without turning off the power. Or, the
operation will be cancelled.
Notes:
● If the total number of tracks on the master MiniDisc does
not match that on the MiniDisc for stamping, the unit will
display “Can't STAMP” and turn off the power.
Operation of the MiniDisc for stamping
Load a MiniDisc for stamping.
6
If this happens, adjust the total number of tracks on the
newly recorded MiniDisc using the edit operation.
A
● Use a MiniDisc that was recorded by this portable MD
to make a MiniDisc for stamping. Character informa-
tion may not be transferred if you use a MiniDisc re-
corded by other equipment. In such a case, enter at
least one character for the disc name or the track
names. You can transfer information once you record
the TOC.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing a Recorded MiniDisc
To erase tracks one at a time
To erase all of the tracks at once
1
2
Start playing the track to be erased, and
press the 06 button.
1
2
3
Whilst in the stop mode, press the EDIT but-
ton repeatedly to select “ALL ERASE”.
Press the EDIT button repeatedly to select
“ERASE”.
Press the ENTER button.
3
Press the ENTER button.
●
To cancel the operation, press the • ■ / :OFF button.
Press the ENTER button again.
●
To cancel the operation, press the • ■ / :OFF button.
s
4
5
Press the ENTER button again.
● All of the tracks will be erased.
●
The track will be erased.
Caution:
Once a track has been erased, it can not be recovered.
Check the track number before erasing it.
To erase other tracks, repeat steps 1 - 4.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing a recorded MiniDisc : continued
To divide a track
To combine tracks
1
2
Start playing the track to be divided into
two. Press the 06 button at the point where
you want to divide the track.
1
2
Start playing the last of the two tracks to
be combined, and press the 06 button.
Press the EDIT button repeatedly to select
“COMBINE”.
Press the EDIT button repeatedly to select
“DIVIDE”.
3
4
Press the ENTER button.
3
4
Press the ENTER button.
●
To cancel the operation, press the • ■/ :OFF button.
●
To cancel the operation, press the • ■/ :OFF button.
e
Press the ENTER button again.
Press the ENTER button again.
●
T
he two tracks will be combined, and the unit will
●
The track will be divided into two tracks, and the
be paused at the beginning of the combined track.
unit will pause at the beginning of the second of the
two new tracks.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing a Recorded MiniDisc (continued)
When a track has a name before dividing:
To move a track
● The two new tracks will have the same name. However,
in the TOC FULL condition, the second track may not be
named.
1
2
Play the track to be moved, and press the
06 button.
Total number of tracks that can be divided:
● Each disc can hold up to 255 tracks. However, even if
the number of assigned tracks has not reached 254, it
might not be possible to make any further divisions of
tracks.
Press the EDIT button repeatedly to select
“MOVE”.
To combine two non-adjacent tracks:
● First, put the two tracks next to each other in the order
you want using the MOVE function. Then combine them
using the COMBINE function.
3
Press the ENTER button.
When one or both tracks to be combined have a name:
● The first track name will be used. However, when the
first track does not have a name, the second track name
will be used.
●
To cancel the operation, press the • ■/ :OFF button.
5
4
4
5
Press the
direction.
or
button to select the
In the following cases, tracks may not be combined:
● Tracks recorded by different inputs cannot be combined.
Example:
A
- Digital recorded track and analogue recorded track.
Press the ENTER button again.
- Different recording modes (stereo recording, 2 times
long recording, 4 times long recording, monaural re-
cording)
● The track will be moved, and the unit will be paused
● Tracks whose recording time is less than 12 seconds.
at the beginning of the track.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to a MiniDisc Through a Stereo System or a Car Stereo
Listening through a stereo system
Listening through a car stereo
To the LINE INPUT sockets
Red:
To the right
White:
To the left
Separately available
cassette adaptor
(AD-CT14)
Separately
Separately available
plug adaptor
car adaptor
(AD-M66PA)
(AD-CA55X)
available
Connection cable
Notes:
●
●
Adjust the volume of both this portable MD and a car stereo.
Do not operate this portable MD whilst you drive a car.
It may distract your attention and cause a traffic accident.
s
● Do not use any car adaptor except for the separately
available AD-CA55X.
● Remove the battery when you power the unit from the
car battery.
● Do not leave the unit in the place of high temperature
such as in a car.
If the unit gets hot, the LCD display will be darkened and
hard to read. It will return to normal when the tempera-
ture cools down.
Notes:
● When recording with stereo system, eliminate the con-
firmation sound (page 41).
Otherwise, it will also be recorded.
● The recording will be made in the analogue mode.
● Character information will not be recorded.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Features and Caution
Resuming auto play
Rechargeable battery
■ When you stop playback and replay the MiniDisc
without removing it, playback starts from the point
you stopped it.
●
A rechargeable nickel-metal hydride battery is the only
kind that can be used. Even if the battery is not used,
you should charge it at least once every three months
because of the special quality of this battery.
The rechargeable battery can be charged approximately
300 times.
When the operating time is reduced to about half the
normal amount of time, even after a full charge is per-
formed, replace the battery with a new one (AD-N55BT).
When the battery is charged for the first time or is charged
after not being used for a long period, the operating time
may be shorter than normal. The battery life will recover
with normal use i.e. charging and discharging.
To avoid shortening the service life of the battery only
recharge the battery after it has been completely dis-
charged.
If the rechargeable battery is used in a cold environment,
the operating time will be reduced.
Do not carry the battery in your pocket or a bag together
with metal objects (keys, coins, jewelry, etc.). The bat-
tery may short out and generate significant amounts of
heat.
Do not short-circuit the terminals as they will become
very hot and will damage the battery.
Do not drop or subject the battery to shock.
Do not insert objects (metal etc.) into the battery com-
partment of this product or into the rechargeable battery.
Stopping
Stopped track
First track
●
●
Playing
■ Once you remove the MiniDisc, playback starts from
the first track.
●
●
Stopping
Stopped track
First track
Playing
■ The unit provides the following functions when you
use it with the separately available car adaptor (AD-
CA55X) (when the rechargeable or alkaline battery
is removed):
s
●
●
1. When you turn off the engine, the power of this port-
able MD also turns off. (It may not work with some
types of cars.)
2. When you restart the engine, playback starts from
the beginning of the stopped track.
●
Stopping
●
●
Stopped track
Playing
First track
52
Download from Www.Somanuals.com. All Manuals Search And Download.
MiniDisc System Limitations
The unit may have the following symptoms whilst recording or editing. The unit is not out of order.
SYMPTOM
LIMITATIONS
“DISC FULL” or “TOC FULL” appears
even though the MiniDisc still has re-
cording time left.
More than 255 tracks (maximum) cannot be recorded regardless of the re-
cording time.
If the MiniDisc is recorded or edited repeatedly or if it has scratches (record-
ing skips scratched parts), you may not be able to record the maximum
tracks above.
The remaining recording time does not
increase even though you erased tracks.
The unit does not count non-recorded portions that last 12 or fewer seconds
to display the remaining recording time. The time may not increase even if
you erase short tracks.
The total of the recorded time and the
remaining time does not match the maxi-
mum recordable time.
One cluster (approximately 2 seconds) is the minimum unit for recording.
For example, a 3-second track uses 2 clusters (approximately 4 seconds).
Therefore, the actual recordable time may be shorter than the displayed
time.
s
Combine function does not work.
Sound skips in fast reverse/forward.
A MiniDisc on which recording and editing are repeated may not allow the
combine function.
One track is divided and recorded in separate places on a repeatedly re-
corded or edited MiniDisc.
Sound may skip.
A track number is created in the middle
of a track.
A track number may be created if there are scratches or dust on the MiniDisc.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Messages
ERROR MESSAGES
MEANING
REMEDY
BATT EMPTY
(LoBATT)
● The battery is run down.
● Charge the rechargeable battery or replace the alkaline bat-
tery (or use the AC adaptor for power).
BLANK MD
(BLANK)
● Nothing is recorded.
● Replace the disc with a recorded disc.
Can’t COPY
(Can’tC)
● You tried to record from a copy prohib- ● Record using the analogue cable.
ited MiniDisc.
Can’t EDIT
(Can’tE)
● A track cannot be edited.
● Change the stop position of the track and then edit it.
Can’t READ *
(Can’tS)
● The disc data cannot be read because the ● Reload the disc.
disc is damaged.
● Replace it with another recorded disc.
(Can’tT)
(Can’tU)
Can’t REC
(Can’tR)
● Recording cannot be performed correctly ● Re-record or replace it with another recordable disc.
due to vibration or shock.
Can’t STAMP
Can’t WRITE
(Can’tW)
● Stamp function does not work.
● Cannot save the TOC information correctly ● Replace the disc with another recordable disc.
to a MiniDisc. (A large portion of the disc
● Check the number of tracks.
has been damaged.)
R
CHARGEmode ● The Charge/Operation switch is not set to ● Set the Charge/Operation switch to the operation mode.
the operation mode when using this unit
with the AC adaptor.
DEFECT
(DEFECT)
DISC FULL
Er-MD **
(ErMD*)
● The disc is scratched.
● If the sound you hear is not right, record again.
● Replace the disc with another recordable disc.
● Replace it with another recordable disc.
● The disc is out of recording space.
● The microprocessor has reported a sys- ● To have it repaired, go to the distributor where you purchased
tem fault and the unit is out of order.
the unit.
HOLD
(HOLD)
● The unit is in the hold mode.
● Return the HOLD switch to its original position.
LOCKED
(Can’tLOCK)
● You removed a MiniDisc whilst recording ● Turn off the power and remove the MiniDisc.
or editing.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Messages : continued
ERROR MESSAGES
MEANING
REMEDY
NO DISC
NO SIGNAL
(noSIG.)
● A disc has not been loaded.
● Poor connection of the digital cable.
● No output signal comes out from the con-
nected unit to playback.
● The input signal has improper sampling
frequency.
● Load a disc.
● Connect the digital cable securely.
●
If the portable CD player has a function to prevent sound skips,
deactivate it.
● Playback with the connected unit.
PLAY MD
(PLAYmd)
POWER ?
● You recorded on a playback-only disc.
●
Replace it with a recordable disc.
● The battery charger is defective.
● To have it repaired, go to the distributor where you purchased
the unit.
PROTECTED
●
●
The write protection tab of a MiniDisc is
set to the protected position.
You tried to record on a playback-only disc.
●
Move the write protection tab back to its original position.
● Replace it with a recordable MiniDisc.
SORRY
(Sorry)
● Since a track number is currently being ● Wait for a while and try the operation again.
located or updated, the unit cannot accept
your command.
TEMP OVER
(TEMP!)
● The temperature is too high.
● Turn off the power, and wait for a while.
R
TOC FORM **
(Tform**)
● There is an error in the recording signal.
● Erase all of the tracks, and then record again.
TOC FULL
● There is no space left for recording char- ● Replace it with another recordable disc.
acter information (track names, disc
names, etc.).
Tr. Protect
● The track has been protected from being ● Edit the track with the device on which it was recorded.
erased.
? DISC
(? DISC)
● A disc which contains data other than ● A disc which contains non-music data cannot be played.
music was played.
● Replace it with another recorded disc.
● There is an error in the signal recorded
on the disc.
● Stamping is not possible.
● Retry.
(
) : Error messages seen on the remote control.
Number or symbol appears in * position.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Many potential “problems” can be resolved by the owner without calling a service technician.
If something seems to be wrong with this product, check the following before calling your authorised SHARP dealer or
service centre.
PROBLEM
CAUSE
PROBLEM
CAUSE
The MiniDisc can- ● Has the track number or character
The unit does not ● Is the AC adaptor disconnected?
not be ejected.
information been updated on the
disc yet?
● Is the unit in the recording or edit-
ing mode?
turn on.
● Is the battery exhausted?
● Is the unit in the hold mode?
● Has condensation formed inside the
unit?
● Is the unit being influenced by me-
chanical shock or by static electric-
ity?
Recording and ● Is the MiniDisc protected against
editing are im-
possible.
accidental erasure?
● Is the unit connected properly to the
other equipment?
No sound is
heard from the
earphones.
● Is the volume set too low?
● Is the remote control unit or the ear-
phones plugged in?
●
Is the AC adaptor unplugged or did a
power failure occur whilst recording or
editing?
R
●
Are you trying to play a MiniDisc with
data on it instead of a MiniDisc contain-
ing music?
● Is the unit in the hold mode?
● Is an optical signal being output from
the stereo system?
Read the operation manual for the
stereo system.
● Is the unit in the hold mode?
● Is the battery exhausted?
● Is the remote control unit plug or the
earphones plug inserted firmly?
When the opera-
tion buttons are
pressed, the unit
does not respond.
The battery cannot ● Is the select switch for charging/
be charged.
operation set on the charging side?
● Is the socket clean?
● Is the battery exhausted?
● Is the unit being subjected to exces-
sive vibration?
Some sounds
are skipped.
Nothing appears ● Is the remote control display set to
on the remote
control display.
“LIGHT OFF”?
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting : continued Maintenance
■ Cleaning
If trouble occurs
When the unit becomes dirty
Clean it with a soft cloth.
When the unit is excessively dirty, use a soft cloth damp-
ened in water (external surfaces only).
When this product is subjected to strong external in-
terference (mechanical shock, excessive static elec-
tricity, abnormal supply voltage due to lightning, etc.)
or if it is operated incorrectly, it may malfunction.
Clean the plugs and the connecting socket.
If the plugs or sockets are dirty, noise may be heard.
Cleaning will prevent noise.
If such a problem occurs, do the following:
1. Unplug the AC adaptor from the wall socket.
2. Remove the battery.
3. Leave the unit completely unpowered for approximately
30 seconds.
4. Plug the AC adaptor back into the wall socket and
reoperate the unit.
Moisture condensation
When the unit has condensation inside, the disc signals
cannot be read, and the unit may not function properly.
R
In the following cases, condensation may form inside the unit.
● Shortly after turning on a heater.
● When the unit is placed in a room
where there is excessive steam
or moisture.
● When the unit is moved from a
cool place to a warm place.
Cautions:
● Do not use chemicals for cleaning (petrol, paint thinner,
etc.).
To remove condensation:
It may damage the cabinet finish.
● Do not apply oil to the inside of the unit.
It may cause malfunctions.
Remove the MiniDisc and leave the unit for approximately
1 hour. The condensation should evaporate and the unit
will work properly.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification
changes for product improvement without prior notice.
The performance specification figures indicated are nominal values of production units. There may be some devia-
tions from these values in individual units.
Power source
DC 1.2V: Rechargeable Nickel-Metal Hydride battery (AD-N55BT) x 1
DC 5V: AC adaptor (AC 230 - 240V, 50/60 Hz)
DC 1.5V: Commercially available, “AA” size (LR6), alkaline battery x 1
DC 1.5V: Separately available car adaptor, AD-CA55X (for cars with a 12-24V DC nega-
tive earth electrical system)
Power consumption 7 W (AC adaptor)
Output power
Charging time
Battery life
RMS; 10 mW (5 mW + 5 mW) (0.2% T.H.D.)
Approx. 3.5 hours
When using the rechargeable battery
(fully charged) included with the unit
Continuous recording: Approx. 6.5 hours
Continuous play: Approx. 12 hours
When using one, commercially available, high
capacity, “AA” size (LR6), alkaline battery (The Continuous play:
rechargeable battery is in the unit, discharged)
Continuous recording: Approx. 6 hours
Approx. 18 hours
s
When using one, commercially available, high
capacity, “AA” size (LR6), alkaline battery with
the rechargeable battery (fully charged)
Continuous recording: Approx. 15.5 hours
Continuous play: Approx. 30 hours
● The above values are the standard values when the unit is operated horizontally and
charged at an ambient temperature of 20°C (68°F). (The operable duration with the
rechargeable battery will be shorter when the unit is carried around.)
● The volume level is set at “VOL 15”.
● The LED is set at “LEDopr” (see page 31).
● Operable duration with a commercially available battery varies depending on its maker,
type, and conditions of use.
● “Fully charged” means that the charging is complete after approximately 3.5 hours since
the remaining amount of the battery is reduced to “
” (1 bar).
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Input sensitivity
MIC H: reference input level 0.25 mV
MIC L: reference input level 2.5 mV
LINE: reference input level 100 mV
input impedance
input impedance
input impedance
10 k ohms
10 k ohms
20 k ohms
Output level
Earphones
LINE:
:
maximum output level 5 mW + 5 mW
specified output 250 mV (-12 dB) load impedance
load impedance
32 ohms
10 k ohms
Dimensions
Weight
Width: 72.0 mm (2-27/32”) Height: 19.5 mm (25/32”) Depth: 78.9 mm (3-1/8”)
137 g (0.30 lbs.) with rechargeable battery
Input socket
Output socket
Type
Line/optical digital, microphone (powered by the main unit)
Earphones (impedance: 32 ohms)/remote control unit
Portable MiniDisc recorder
Signal readout
Audio channels
Non-contact, 3-beam semi-conductor laser pick-up
Stereo 2 channels/monaural (long-play mode) 1 channel
Frequency response 20 – 20,000 Hz (± 3 dB)
R
Rotation speed
Error correction
Coding
Approx. 400 – 1,350 rpm
ACIRC (Advanced Cross Interleave Reed-Solomon Code)
ATRAC (Adaptive Transform Acoustic Coding), 24-bit computed type
Magnetic modulation overwrite method
Recording method
Sampling frequency 44.1 kHz (32 kHz and 48 kHz signals are converted to 44.1 kHz, and then recorded.)
Wow and flutter Unmeasurable (less than ±0.001% W. peak)
59
Download from Www.Somanuals.com. All Manuals Search And Download.
TERMS OF GUARANTEE
Subject to the terms listed below, Sharp Electronics (U.K.)
4. This guarantee does not cover any faults or defects
caused by accident, misuse, fair wear and tear, neglect,
tampering with the equipment, or any attempt at ad-
justment or repair other than by a Service Facility ap-
pointed by Sharp.
Ltd. (hereinafter called “the Company”) guarantee to pro-
vide for the repair of, or at its option replace this Sharp
Equipment, or any component thereof, (other than bat-
teries), which is faulty or below standard, as a result of
inferior workmanship or materials.
5. In the unlikely event of a defect occuring, the product
must be returned to the Company’s repair centre with
proof of purchase. A postage paid label and a fault re-
port form are supplied with the product for this purpose.
It is your responsibility to ensure that the packaging is
adequate, and to obtain proof of posting.
Further details of the repair service, which is available
after the guarantee period on a chargeable basis, and
additional report forms and labels can be obtained by
telephoning 0870 738 0000.
The conditions of this guarantee are:
1. The guarantee shall only apply to defects which occur
within one year from the date of purchase, provided
that this equipment is sent to the repair address within
this period.
2. This guarantee covers equipment intended for private
domestic use only. This guarantee does not apply to
equipment used in the course of a business, trade or
profession.
6. No person has any authority to vary the terms or condi-
tions of this guarantee.
3. The guarantee does not cover MiniDiscs or batteries.
7. This guarantee is offered as an additional benefit to
the consumer’s statutory rights and does not affect
these rights in any way.
SHARP ELECTRONICS (U.K.) LTD.
Sharp House, Thorp Road, Newton Heath, Manchester, M40 5BE
SHARP CORPORATION
TINSE****AWZZ
A0011.TO
Download from Www.Somanuals.com. All Manuals Search And Download.
TERMS OF GUARANTEE
Subject to the terms listed below, Sharp Electronics (U.K.)
4. This guarantee does not cover any faults or defects
caused by accident, misuse, fair wear and tear, neglect,
tampering with the equipment, or any attempt at ad-
justment or repair other than by a Service Facility ap-
pointed by Sharp.
Ltd. (hereinafter called “the Company”) guarantee to pro-
vide for the repair of, or at its option replace this Sharp
Equipment, or any component thereof, (other than bat-
teries), which is faulty or below standard, as a result of
inferior workmanship or materials.
5. In the unlikely event of a defect occuring, the product
must be returned to the Company’s repair centre with
proof of purchase. A postage paid label and a fault re-
port form are supplied with the product for this purpose.
It is your responsibility to ensure that the packaging is
adequate, and to obtain proof of posting.
Further details of the repair service, which is available
after the guarantee period on a chargeable basis, and
additional report forms and labels can be obtained by
telephoning 0870 738 0000.
The conditions of this guarantee are:
1. The guarantee shall only apply to defects which occur
within one year from the date of purchase, provided
that this equipment is sent to the repair address within
this period.
2. This guarantee covers equipment intended for private
domestic use only. This guarantee does not apply to
equipment used in the course of a business, trade or
profession.
6. No person has any authority to vary the terms or condi-
tions of this guarantee.
3. The guarantee does not cover MiniDiscs or batteries.
7. This guarantee is offered as an additional benefit to
the consumer’s statutory rights and does not affect
these rights in any way.
SHARP ELECTRONICS (U.K.) LTD.
Sharp House, Thorp Road, Newton Heath, Manchester, M40 5BE
SHARP CORPORATION
TINSE0340AWZZ
A0011.TO
Download from Www.Somanuals.com. All Manuals Search And Download.
|