Sharp DVD Player XL DV60 User Manual

Thank you for purchasing this SHARP product.  
To obtain the best performance from this product, please read this  
manual carefully. It will guide you in operating your SHARP product.  
XL-DV60 DVD Micro System consisting of XL-DV60 (main unit), CP-  
DV60F (front speakers) and CP-DV60SW (subwoofer).  
DVD MICRO SYSTEM  
MODEL  
XL-DV60  
OPERATION MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XL-DV60  
IMPORTANT SAFETY INSTRUCTIONS  
1 Read Instructions - All the safety and operating instructions should  
10 Ventilation - Slots and openings in the cabinet are provided for venti-  
lation and to ensure reliable operation of the product and to protect it  
from overheating, and these openings must not be blocked or cov-  
ered. The openings should never be blocked by placing the product on  
a bed, sofa, rug, or other similar surface. This product should not be  
placed in a built-in installation such as a bookcase or rack unless proper  
ventilation is provided or the manufacturer’s instructions have been  
adhered to.  
be read before the product is operated.  
2 Retain Instructions - The safety and operating instructions should be  
retained for future reference.  
3 Heed Warnings - All warnings on the product and in the operating  
instructions should be adhered to.  
4 Follow Instructions - All operating and use instructions should be  
followed.  
11 Power Sources - This product should be operated only from the type  
of power source indicated on the marking label. If you are not sure of  
the type of power supply to your home, consult your product dealer or  
local power company. For products intended to operate from battery  
power, or other sources, refer to the operating instructions.  
5 Cleaning - Unplug this product from the wall outlet before cleaning.  
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for  
cleaning.  
12 Grounding or Polarization - This product may be equipped with a  
polarized alternating-current line plug (a plug having one blade wider  
than the other). This plug will fit into the power outlet only one way.  
This is a safety feature. If you are unable to insert the plug fully into the  
outlet, try reversing the plug. If the plug should still fail to fit, contact  
your electrician to replace your obsolete outlet. Do not defeat the safety  
purpose of the polarized plug.  
6 Attachments - Do not use attachments not recommended by the prod-  
uct manufacturer as they may cause hazards.  
7 Water and Moisture - Do not use this product near water - for ex-  
ample, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a  
wet basement; or near a swimming pool; and the like.  
8 Accessories - Do not place this product on an unstable cart, stand,  
tripod, bracket, or table. The product may fall, causing serious injury to  
a child or adult, and serious damage to the product. Use only with a  
cart, stand, tripod, bracket, or table recommended by the manufac-  
turer, or sold with the product. Any mounting of the product should  
follow the manufacturer’s instructions, and should use a mounting ac-  
cessory recommended by the manufacturer.  
Alternate Warnings - This product is equipped with a three-wire  
grounding-type plug, a plug having a third (grounding) pin. This plug  
will only fit into a grounding-type power outlet. This is a safety feature.  
If you are unable to insert the plug into the outlet, contact your electri-  
cian to replace your obsolete outlet. Do not defeat the safety purpose  
of the grounding-type plug.  
13 Power-Cord Protection - Power-supply cords should be routed so  
that they are not likely to be walked on or pinched by items placed  
upon or against them, paying particular attention to cords at plugs,  
convenience receptacles, and the point where they exit from the product.  
9 A product and cart combination should be moved with  
care. Quick stops, excessive force, and uneven surfaces  
may cause the product and cart combination to over-  
turn.  
14 Protective Attachment Plug - The product is equipped with an at-  
tachment plug having overload protection. This is a safety feature. See  
Instruction Manual for replacement or resetting of protective device. If  
replacement of the plug is required, be sure the service technician has  
used a replacement plug specified by the manufacturer that has the  
same overload protection as the original plug.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
XL-DV60  
IMPORTANT SAFETY INSTRUCTIONS (continued)  
15 Outdoor Antenna Grounding - If an outside antenna or cable system 19 Object and Liquid Entry - Never push objects of any kind into this  
is connected to the product, be sure the antenna or cable system is  
grounded so as to provide some protection against voltage surges and  
built-up static charges. Article810 of the National Electrical Code, ANSI/  
NFPA 70, provides information with regard to proper grounding of the  
mast and supporting structure, grounding of the lead-in wire to an an-  
tenna discharge unit, size of grounding conductors, location of antenna  
discharge unit, connection to grounding electrodes, and requirements  
for the grounding electrode.  
product through openings as they may touch dangerous voltage points  
or short-out parts that could result in a fire or electric shock. Never spill  
liquid of any kind on the product.  
20 Servicing - Do not attempt to service this product yourself as opening  
or removing covers may expose you to dangerous voltage or other  
hazards. Refer all servicing to qualified service personnel.  
21 Damage Requiring Service - Unplug this product from the wall outlet  
and refer servicing to qualified service personnel under the following  
conditions:  
Example of antenna grounding as per  
National Electrical Code, ANSI/NFPA 70  
a) When the power-supply cord or plug is damaged,  
b)If liquid has been spilled, or objects have fallen into the product,  
c) If the product has been exposed to rain or water,  
ANTENNA LEAD IN WIRE  
GROUND  
CLAMP  
d)If the product does not operate normally by following the operating  
instructions. Adjust only those controls that are covered by the op-  
erating instructions as an improper adjustment of other controls may  
result in damage and will often require extensive work by a qualified  
technician to restore the product to its normal operation,  
ANTENNA DISCHARGE UNIT  
(NEC SECTION 810-20)  
ELECTRIC  
SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
e) If the product has been dropped or damaged in any way, and  
GROUND CLAMPS  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
f) When the product exhibits a distinct change in performance - this  
indicates a need for service.  
NEC - NATIONAL ELECTRICAL CODE  
S2898A  
22 Replacement Parts - When replacement parts are required, be sure  
the service technician has used replacement parts specified by the  
manufacturer or have the same characteristics as the original part.  
Unauthorized substitutions may result in fire, electric shock, or other  
hazards.  
16 Lightning - For added protection for this product during a lightning  
storm, or when it is left unattended and unused for long periods of  
time, unplug it from the wall outlet and disconnect the antenna or cable  
system. This will prevent damage to the product due to lightning and  
power-line surges.  
23 Safety Check - Upon completion of any service or repairs to this prod-  
uct, ask the service technician to perform safety checks to determine  
that the product is in proper operating condition.  
17 Power Lines - An outside antenna system should not be located in the  
vicinity of overhead power lines or other electric light or power circuits,  
or where it can fall into such power lines or circuits. When installing an  
outside antenna system, extreme care should be taken to keep from  
touching such power lines or circuits as contact with them might be  
fatal.  
24 Wall or Ceiling Mounting - The product should be mounted to a wall  
or ceiling only as recommended by the manufacturer.  
25 Heat - The product should be situated away from heat sources such  
as radiators, heat registers, stoves, or other products (including ampli-  
fiers) that produce heat.  
18 Overloading - Do not overload wall outlets, extension cords, or integral  
convenience receptacles as this can result in a risk of fire or electric shock.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Accessories  
XL-DV60  
Please confirm that the following accessories are included.  
"DTS" and "DTS Digital Out" are trademarks of Digital Theater Sys-  
tems, Inc.  
Manufactured under license from Dolby Laboratories. "Dolby" and  
the double-D symbol are trademarks of Dolby Laboratories.  
NOTES  
Licensed under one or more of U.S. Pat. 4,972,484, 5,214,678,  
5,323,396, 5,530,655, 5,539,829, 5,544,247, 5,606,618, 5,610,985,  
5,740,317, 5,777,992, 5,878,080 or 5,960,037.  
Remote control  
(RRMCGA007SJSA)  
1
FM/AM loop antenna  
(QANTL0009SJZZ)  
1
Supply of this product does not convey a license nor imply any  
right to distribute content created with this product in revenue-  
generating broadcast systems (terrestrial, satellite, cable and/or  
other distribution channels), revenue-generating streaming  
applications (via Internet, intranets and/or other networks), other  
revenue-generating content distribution systems (pay-audio or  
audio-on-demand applications and the like) or on revenue-  
generating physical media (compact discs, digital versatile discs,  
semiconductor chips, hard drives, memory cards and the like). An  
independent license for such use is required. For details, please  
AC power cord  
(QACCU0003SJ00)  
1
Video cable  
(QCNWGA004SJZZ)  
1
Caution:  
MPEG Layer-3 audio coding technology licensed from Fraunhofer  
IIS and Thomson.  
Do not use the supplied AC power cord for other equipment. Fire or  
electric shock may result.  
Note:  
ENERGY STAR® Program Information  
Only the above accessories are included.  
Icons used in this operation manual  
Some functions may not be available depending on discs. The fol-  
lowing icons indicate the discs that can be used in the section.  
... Indicates DVDs.  
Products that have earned  
the ENERGY STAR® are  
designed to protect the  
environment through  
... Indicates video CDs.  
... Indicates audio CDs.  
... Indicates CD-R/RW with MP3 recording.  
... Indicates CD-R/RW with JPEG recording.  
superior energy efficiency.  
! Some operations may not be performed depending on discs  
even if they are described in this manual.  
! During operation, " " may be displayed on the screen. This  
means that the operations described in this manual are prohib-  
ited by the disc.  
To comply with the ENERGY STAR® standards mentioned above,  
please cancel the demonstration mode, as described on page18.  
ENERGY STAR® is a U.S. registered mark.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
XL-DV60  
Page  
Page  
" General Information  
" Video CD Operation  
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 10  
Description of discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 13  
Playing a video CD  
To play a video CD with P. B. C. (playback control) . . . . . . . . 35  
" Audio CD Operation  
" Preparation for Use  
Playing an audio CD  
System connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 - 18  
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
General control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
To play in random order (random play) . . . . . . . . . . . . . . . . . . 36  
To start playback from the desired point (direct play) . . . . . . 36  
To play in the desired order (programmed playback) . . . . . . . 37  
" MP3 and JPEG Disc Operation  
Playing an MP3 and JPEG disc . . . . . . . . . . . . . . . . . . . . . . 38, 39  
" DVD Operation  
Playing a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 - 24  
" Radio  
Basic operation  
Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40, 41  
To locate the beginning of a chapter/track (skip) . . . . . . . . . . 25  
Fast forward/Fast reverse (search) . . . . . . . . . . . . . . . . . . . . . . 25  
To start playback from the desired point (direct play) . . . 26, 27  
Still picture/Frame advance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Slow-motion play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
" Advanced Features  
Changing the initial setting of DVD . . . . . . . . . . . . . . . . . 42 - 47  
Timer and sleep operation . . . . . . . . . . . . . . . . . . . . . . . . 48 - 50  
Enhancing your system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51  
Useful operation  
To change the audio language (audio output) . . . . . . . . . . . . . 28  
To change the subtitle language . . . . . . . . . . . . . . . . . . . . . . . . 29  
To change the angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
To select a title, subtitle or audio language, etc.  
" References  
Troubleshooting chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52, 53  
Error indicators and warnings . . . . . . . . . . . . . . . . . . . . . . . . . 53  
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54, 55  
from the top menu or menu of the disc . . . . . . . . . . . . . . . . . . 29  
To zoom in on an image (zoom) . . . . . . . . . . . . . . . . . . . . . . . . 30  
To brighten an image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
To improve the image quality . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
To change the display on TV screen . . . . . . . . . . . . . . . . . . . . 32  
To play repeatedly (repeat play) . . . . . . . . . . . . . . . . . . . . . . . . 33  
To play the contents between the specified points  
CONSUMER LIMITED WARRANTY . . . . . . . . . . . . . . .Back cover  
Copyright Information:  
repeatedly (A-B repeat) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
! Unauthorized copying, broadcast, public display, transmission,  
public performance and rental (regardless of whether or not  
such activities are for profit) of disc contents are prohibited by  
law.  
! This system is equipped with copy protection technology that  
causes substantial degradation of images when the contents of  
a disc are copied to a video tape.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions  
XL-DV60  
" General  
! Hold the AC power plug by the head when  
removing it from the AC outlet, as pulling  
the cord can damage internal wires.  
! Please ensure that the equipment is positioned in a well-venti-  
lated area and ensure that there is at least 4" (10 cm) of free  
space along the sides, top and back of the equipment.  
4" (10 cm) 4" (10 cm)  
4" (10 cm)  
! Do not remove the outer cover, as this  
may result in electric shock. Refer inter-  
nal service to your local SHARP service  
facility.  
4" (10 cm)  
! Use the unit on a firm, level surface free from  
vibration.  
! This unit should only be used within the range of 41°F - 95°F  
(5°C - 35°C).  
Warning:  
The voltage used must be the same as that specified on this unit.  
Using this product with a higher voltage other than that which is  
specified is dangerous and may result in a fire or other type of acci-  
dent causing damage. SHARP will not be held responsible for any  
damage resulting from use of this unit with a voltage other than that  
which is specified.  
! Keep the unit away from direct sunlight,  
strong magnetic fields, excessive dust,  
humidity and electronic/electrical equip-  
ment (home computers, facsimiles, etc.)  
which generate electrical noise.  
" Volume control  
! Do not place anything on top of the unit.  
The sound level at a given volume setting depends on speaker effi-  
ciency, location and various other factors. It is advisable to avoid  
exposure to high volume levels, which occurs while turning the unit  
on with the volume control setting up high, or while continually lis-  
tening at high volumes.  
! Do not expose the unit to moisture, to temperatures higher than  
140°F (60°C) or to extremely low temperatures.  
! If your system does not work properly, disconnect the AC power  
cord from the AC outlet. Plug the AC power cord back in, and  
then turn on your system.  
! In case of an electrical storm, unplug the  
unit for safety.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls and indicators  
XL-DV60  
" Front panel  
Reference page  
1. Video/Auxiliary Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51  
2. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
3. DVD/CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
4. Power On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . 18  
5. Timer Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49  
6. Stop or Tuning Down Button . . . . . . . . . . . . . . . . . . . . . 23, 40  
7. Play or Tuning Up Button . . . . . . . . . . . . . . . . . . . . . . . 23, 40  
8. Extra Bass/Demo Mode Button . . . . . . . . . . . . . . . . . . . 18, 20  
9. Equalizer Mode Select Button . . . . . . . . . . . . . . . . . . . . . . . 20  
10. Headphone Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51  
11. Remote Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
12. Disc Number Select Buttons . . . . . . . . . . . . . . . . . . . . . . . . 23  
13. Chapter (Track) Skip Down or Fast Reverse,  
11  
1
2
3
4
5
6
7
8
12  
13  
14  
15  
16  
17  
Tuner Preset Down Button . . . . . . . . . . . . . . . . . . . . . . 25, 41  
14. Chapter (Track) Skip Up or Fast Forward,  
Tuner Preset Up Button . . . . . . . . . . . . . . . . . . . . . . . . . 25, 41  
15. Memory/Set Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
16. Disc Compartment Open/Close Button . . . . . . . . . . . . . . . 22  
17. Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
18. Disc Compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
18  
" Display  
9
Reference page  
1. Disc Number Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
2. Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
3. Pause Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
4. Repeat Play Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . 33, 34  
5. Disc Type Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
6. Extra Bass Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
7. Sleep Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50  
8. Timer Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48  
9. Sound Mode Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
10. Memory Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37, 41  
11. Angle Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
12. Surround Mode Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
13. FM Stereo Mode Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
14. FM Stereo Receiving Indicator . . . . . . . . . . . . . . . . . . . . . . 40  
10  
1
2 3 4  
5
6 7 8  
9
10 11  
12 13 14  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
XL-DV60  
" Rear panel  
Reference page  
1. AC Power Input Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
2. Speaker Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
3. Component Video Output Jacks . . . . . . . . . . . . . . . . . . . . . 17  
4. Cooling Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
5. FM/AM Loop Antenna Jack . . . . . . . . . . . . . . . . . . . . . . . . . 15  
6. Video/Auxiliary (Audio Signal) Input Jacks . . . . . . . . . . . . 51  
7. Video Output Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
8. S-video Output Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
9. Optical Digital Audio Output Jack . . . . . . . . . . . . . . . . . . . 51  
4
1
5
6
2
3
7
8
9
" Front speaker  
1. Semi Dome Tweeter  
2. Woofer  
3. Bass Reflex Duct  
4. Speaker Wire  
1
2
3
4
" Subwoofer  
1. Sub Duct Pipe  
2. Subwoofer  
2
3. Speaker Wire  
1
3
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls and indicators (continued)  
XL-DV60  
" Remote control  
1
Reference page  
1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . 19  
2. DVD Setup Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
3. Power On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . 19  
4. Direct Number Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
5. Chapter (Track) Skip Down or Fast Reverse,  
19  
2
3
Tuner Preset Down, Time Down Button . . . . . . . . . 21, 25, 41  
6. Cursor Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 42  
7. Zoom or Audio Select Button . . . . . . . . . . . . . . . . . 28, 30, 39  
8. Repeat Play Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
9. Frame Advance or Pause Button . . . . . . . . . . . . . . . . . 23, 27  
10. A - B Repeat Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
11. Memory/Set Button . . . . . . . . . . . . . . . . . . . . . . . . . 21, 37, 41  
12. Top Menu or Return Button . . . . . . . . . . . . . . . . . . . . . . 29, 42  
13. Subtitle or Surround Mode Select Button . . . . . . . . . . 20, 29  
14. Shift Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
15. Extra Bass or Digital Picture Select Button . . . . . . . . . 20, 31  
16. DVD/CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
17. Equalizer Mode Select or Digital Gamma Button . . . . 20, 31  
18. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
19. Menu or On Screen Display Select Button . . . . . . . . . . 29, 32  
20. Disc Number Select Buttons . . . . . . . . . . . . . . . . . . . . . . . . 23  
21. Direct or Video Mode Select Button . . . . . . . . . . . . . . . 17, 26  
22. Chapter (Track) Skip Up or Fast Forward,  
Tuner Preset Up, Time Up Button . . . . . . . . . . . . . . 21, 25, 41  
23. Enter Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 42  
24. Angle Select Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
25. Play Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
26. Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
27. Random Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
28. Clear Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
29. Timer/Sleep Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 50  
30. Clock Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
31. Video/Auxiliary Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51  
32. Volume or Subwoofer Level Up and Down Buttons . . . . . 20  
20  
21  
4
5
22  
23  
6
7
8
24  
25  
26  
27  
28  
29  
30  
31  
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
32  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of discs  
XL-DV60  
" Types of playable discs  
The unit can play back discs bearing any of the following marks:  
(*1): Discs including DVD-R/DVD-RW/DVD+R/DVD+RW may not be  
played back due to properties and scratches on the disc, dirty  
optical pickup lens, etc.  
(*2): Only the audio on the CDV can be played.  
(*3): The CD-R/CD-RW may not be played back properly depending  
on the recording equipment or the disc.  
Disc type  
Disc contents  
Disc size  
DVD Video Disc for NTSC  
system  
Audio and video  
(movies)  
5" (12 cm)  
3" (8 cm)  
(*4): If the sampling frequency is 44.1 or 48.1 kHz and the fixed bit  
rate is 128 kbps or higher, MPEG 1 Audio Layer 3 (MP3) files  
can be played. However, some of them may not be played de-  
pending on their conditions or formats.  
(*5): JPEG or JPG picture discs also play on this unit. However, pic-  
tures may not be clear (depends on resolution and recording  
method).  
Or DVD-R/DVD-RW/DVD+R/  
DVD+RW recorded in video  
mode (*1)  
Video CD for NTSC system  
Audio and video  
(movies)  
5" (12 cm)  
3" (8 cm)  
! For unplayable discs, see page 13.  
Copy Protection:  
This unit supports Macrovision copy protection.  
On DVD discs that include a copy protection code, if the contents of  
the DVD disc are copied using a VCR, the copy protection code pre-  
vents the videotape copy from playing normally.  
Audio CD  
Audio  
5" (12 cm)  
3" (8 cm)  
Apparatus Claims of U.S.Patent Nos. 4,631,603, 4,577,216,  
4,819,098 and 4,907,093 licensed for limited viewing uses only.  
Or CDV (*2)  
This product incorporates copyright protection technology that is  
protected by method claims of certain U.S. patents and other  
intellectual property rights owned by Macrovision Corporation  
and other rights owners. Use of this copyright protection  
technology must be authorized by Macrovision Corporation, and  
is intended for home and other limited viewing uses only unless  
otherwise authorized by Macrovision Corporation. Reverse  
engineering or disassembly is prohibited.  
CD-R/CD-RW (*3)  
Audio and picture  
5" (12 cm)  
3" (8 cm)  
CD-R/CD-RW re-  
corded in MP3 for-  
mat (*4), JPEG  
format (*5)  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of discs (continued)  
XL-DV60  
" DVD-Video  
A popular type of DVD disc of the same size as a CD, mainly con-  
taining video images.  
" Video CD/audio CD  
Track  
Video CD and audio CD are composed of "tracks". Tracks are equiv-  
alent to songs on a CD.  
Region number  
DVD discs are programmed with region  
numbers indicating countries in which  
they can be played. This system can  
play discs with region number "1" or  
"ALL".  
Region number  
(playable area number)  
Track 1 Track 2 Track 3 Track 4  
ALL  
1
" MP3/JPEG format on CD-R/CD-RW  
Title and chapter  
An MP3 file is audio data compressed in the MPEG 1 audio layer 3  
format. MP3 files have the extension ".mp3". (Files with the exten-  
sion ".mp3" may not play, or noise may occur during playback if not  
recorded in the MP3 format.)  
DVD-Video discs are divided into "titles" and "chapters". If the disc  
has more than one movie on it, each movie is a separate "title".  
"Chapters" are subdivisions of titles.  
A JPEG file is still image data compressed in the JPEG (Joint Pho-  
tographic Experts Group) format. JPEG files have the extension  
".jpg".  
Title 1  
Title 2  
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2  
Folder and file  
MP3/JPEG discs consist of "folders" and "files".  
MP3 JPEG  
disc  
disc Folder 1  
Folder 2  
File 1  
" DVD-R/DVD-RW/DVD+R/DVD+RW  
! You can play DVD-R/DVD-RW/DVD+R/DVD+RW discs recorded  
in the video mode.  
! Before playing DVD-R/DVD-RW/DVD+R/DVD+RW discs with  
this unit, finalize them with the equipment used for record-  
ing.  
File 1  
File 2  
File 3  
File 2  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XL-DV60  
" Icons used on DVD discs  
" Discs that cannot be played  
! DVDs without the region num- ! DVD-Audio  
Check the icons of the DVD jacket before playing your discs.  
! CDG  
ber "1" or "ALL".  
! DVDs with SECAM system  
! DVDs with MPEG sound  
! DVD-ROM  
Display  
Description  
! Photo CD  
Format recorded on the DVD  
Select a type according to the  
connected TV type.  
! CD-ROM  
! SACD  
! DVD-RAM  
! Discs recorded in special for-  
mats, etc.  
Type of subtitles recorded  
Recorded subtitle languages.  
Example:  
You can select a subtitle lan-  
guage.  
Notes:  
2
1. English  
! The discs above cannot be played at all, or no sound is heard  
although images appear on the screen or vice versa.  
! Faulty playback may damage the speakers and can have an  
adverse effect on your hearing when played at high volume set-  
tings.  
! You cannot play illegally produced discs.  
! A disc with scratches or fingerprints may not play properly. Refer  
to "Care of discs" (page 54) and clean the disc.  
2. German  
Number of camera angles  
Number of angles recorded on  
the DVD.  
You can view scenes from dif-  
ferent angles.  
2
Number of audio tracks and au- The number of audio tracks  
dio recording systems  
and audio recording systems  
are indicated.  
Example:  
! You can change the audio  
1: Original <English>  
language.  
(Dolby Digital 5.1 Sur-  
round)  
! Audio and recording sys-  
tem vary depending on the  
DVD. Check them in the  
DVD's manual.  
2. German (Dolby Dig-  
ital 2 ch)  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System connections  
XL-DV60  
Make sure to unplug the AC power cord before making any connections.  
FM/AM loop antenna connection (see page 15)  
FM antenna  
AM loop antenna  
Subwoofer  
Front speaker (right)  
Front speaker (left)  
TV  
TV connection  
(see pages 16 - 17)  
AC outlet  
(AC 120 V, 60 Hz)  
Speaker connection (see page 15)  
Connecting the AC power cord (see page 18)  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XL-DV60  
" FM/AM loop antenna connection  
Connect the FM/AM loop antenna to the ANTENNA jack.  
" Speaker connection  
Insert the front speaker plugs (black) into the FRONT terminals.  
Insert the subwoofer plug (red) into the SUBWOOFER terminal.  
Position the FM antenna wire and rotate the AM loop antenna for  
optimum reception. Place the AM loop antenna on a shelf, or attach  
it to a stand or a wall.  
Front speaker  
(right)  
Front speaker  
(left)  
Subwoofer  
Speaker or subwoofer plug in with the rising  
side facing to the right.  
Black  
Red  
Notes:  
Caution:  
! Placing the antenna on the stereo system or near the AC power  
cord may cause noise pickup. Place the antenna away from the  
stereo system for better reception.  
! Do not connect the attached FM antenna to an external antenna  
as this may cause trouble.  
! The supplied speakers are exclusively for the XL-DV60. Do  
not connect them to other equipment, and do not connect  
other speakers to the XL-DV60. It may cause malfunction.  
! Use speakers with an impedance of 6 ohms or more, as lower im-  
pedance speakers can damage the unit.  
! Do not mistake the right and the left channels. The right speaker  
is the one on the right side when you face the unit.  
Installing the AM loop antenna:  
! Do not allow any objects to fall into or to be placed in the bass re-  
flex ducts of the speakers.  
< Assembling >  
< Attaching to the wall >  
! Do not stand or sit on the speakers. You may be injured.  
" Front speaker grills are removable  
Make sure nothing comes into contact with the  
speaker diaphragm when you remove the  
speaker grilles.  
Wall Screws (not supplied)  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System connections (continued)  
XL-DV60  
" Placing the speaker system  
" TV connection  
Three types of jacks (VIDEO OUT, S-VIDEO OUT and COMPO-  
NENT VIDEO OUT) are available for connection of a TV and this  
unit. Connect according to your TV.  
Same distance  
Connecting to a TV with a video input jack:  
You can enjoy DVD images by connecting your TV and this unit with  
the supplied video cable.  
Set the video mode to "Interlace" (default setting). For the proce-  
dure, refer to "Changing the video mode" on page 17.  
Subwoofer  
Front speaker  
(right)  
Front speaker  
(left)  
Notes:  
! Place the TV halfway between the front speakers.  
! The bass sound from the subwoofer is omni-directional, however,  
it is recommended to place it as close as left and right speakers.  
! Place the subwoofer on a sturdy and stable surface as it tends to  
vibrate while reproducing bass sounds.  
Video signal  
! Keep the free space of at least 4" (10 cm) along the right side of  
the subwoofer.  
" Magnetically shielded speakers  
The speakers are magnetically shielded.  
Therefore, they do not affect the display even if you use them near  
the TV. However, some color variation may occur, depending on the  
type of TV used.  
Video cable  
(supplied)  
TV  
If color variation occurs...  
Turn off the TV (from the power switch).  
After 15 - 30 minutes, turn the TV on again.  
To video  
input jack  
If the color variation is still present...  
Move the speakers further away from the TV.  
Notes:  
! Change the TV input in accordance with the connected jack.  
! Do not connect other equipment (VCR, etc.) between the TV  
and this unit. Pictures may be distorted.  
! Refer to the operation manual of the equipment to be connect-  
ed.  
If any kind of magnet or an electromagnet is placed too close to the  
TV and the system, irregular colors may appear on the TV screen.  
! Insert the plugs fully to avoid fuzzy pictures or noise.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XL-DV60  
Connecting to a TV with an S-video input jack:  
If your TV is equipped with an S-video input jack, you can enjoy higher  
quality images by connecting it with an S-video cable (not supplied).  
Connecting to a TV with component video input jacks:  
If your TV is equipped with component video input jacks, purchase a  
component video cable to enjoy higher quality images.  
Set the video mode to "Interlace" (default setting). For the proce-  
dure, refer to "Changing the video mode".  
For a progressive scan TV, set the video mode to "Progressive".  
Select "Interlace" for a non-progressive scan TV.  
Video signal  
S-video cable  
(commercially available)  
TV  
To component  
video input jacks  
To S-video  
input jack  
TV  
Video signal  
Note:  
When the video and S-video cables are both connected, the images  
from the S-video input jack appears on your TV.  
Component video cable  
(commercially available)  
Changing the video mode:  
Notes:  
1 Insert a DVD disc (steps 1 - 6, pages 22 - 23).  
2 While in the stop mode, press the SHIFT button and DIRECT/  
VIDEO MODE button on the remote control.  
! If your TV has different indications for the component video inputs  
(Y, B-Y and P-Y), connect jacks with its matching color.  
! Some component video jacks designed for the high-vision sys-  
tem are not compatible with DVD. Do not connect this unit to  
those component video input jacks. (Images may appear dis-  
torted or may not appear due to the system difference.)  
Each time these buttons are pressed, the mode will change in  
the following order:  
Interlace  
Select this for a non-progressive scan TV  
(use a video cable, S-video cable, or component  
video cable).  
What is progressive scanning?  
The conventional TV system displays 30 frames of still images per  
second to perform a series of movements (interlaced scanning).  
Whereas, progressive scanning displays one frame every 1/60th of  
a second (60 frames per second) to ensure less flickers and high-  
density images.  
Progressive Select this for a progressive scan TV  
(use a component video cable).  
Caution:  
To enjoy images on a TV, make sure to select the right items  
for the following four: video cable, TV's video input jack, and  
this unit's video output jack and video mode. Otherwise, im-  
ages do not appear properly.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System connections (continued)  
XL-DV60  
" Connecting the AC power cord  
" Demonstration mode  
After checking all the connections have been made correctly, con-  
nect the AC power cord to the AC power input jack, then plug the AC  
power cord of this unit into the AC outlet. If you plug in the unit first,  
the unit will enter the demonstration mode.  
When you plug the unit in for the first time,  
the unit will enter the demonstration  
mode. You will see words scroll.  
To cancel the demonstration  
mode:  
When the unit is in the power stand-  
by mode (demonstration mode),  
press the X-BASS/DEMO button.  
The unit will enter the low power  
consumption mode.  
To return to the demonstration mode:  
When the unit is in the power stand-by mode, press the X-BASS/  
DEMO button again.  
AC outlet  
(AC 120 V, 60 Hz)  
Notes:  
Note:  
! Never use a power cord other than the one supplied. Otherwise,  
a malfunction or an accident may occur.  
! Unplug the AC power cord from the AC outlet if the unit will not be  
in use for a prolonged period of time.  
When the power is on, the X-BASS/DEMO button can be used to se-  
lect the extra bass mode.  
" To turn the power on  
Press the ON/STAND-BY but-  
ton to turn the power on.  
Cooling fan:  
A cooling fan is built into this unit for better heat radiation. Do not  
cover the opening in this section with any obstacles to avoid dam-  
age to the unit.  
After use:  
Press the ON/STAND-BY button to enter the power stand-by  
mode.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote control  
XL-DV60  
Notes concerning use:  
! Replace the batteries if the operating distance is reduced or if the  
operation becomes erratic.  
! Periodically clean the transmitter on the remote control and the  
sensor on the unit with a soft cloth.  
" Battery installation  
Use 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar).  
Batteries are not included.  
! Exposing the sensor on the unit to strong light may interfere with  
operation. Change the lighting or the direction of the unit if this  
occurs.  
! Keep the remote control away from moisture, heat, shock, and  
vibrations.  
1
2
Remove the battery cover.  
Insert the batteries according to the direction indicated in  
the battery compartment.  
When inserting or removing the batteries, push them toward the  
battery terminals.  
Replace the cover.  
3
" Test of the remote control  
Check the remote control after checking all the connections (see  
pages 14 - 18).  
Point the remote control directly at the remote sensor on the unit.  
The remote control can be used within the range shown below:  
Press the ON/STAND-BY button. Does the power turn on? Now, you  
can enjoy music.  
Remote sensor  
Precautions for battery use:  
! Replace all old batteries with new ones at the same time.  
! Do not mix old and new batteries.  
! Remove the batteries if the unit will not be used for long periods  
of time. This will prevent potential damage due to battery leak-  
age.  
8" - 20'  
(0.2 m - 6 m)  
Caution:  
! Do not use rechargeable batteries (nickel-cadmium battery, etc.).  
! Installing the batteries incorrectly may cause the unit to malfunc-  
tion.  
Battery removal:  
Remove the battery cover. Push each battery toward the battery  
terminal and take them out.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General control  
XL-DV60  
" Bass control (X-BASS)  
When the power is first turned on,  
the unit will enter the extra bass  
mode which emphasizes the bass  
frequencies, and "X-BASS" will ap-  
pear. To cancel the extra bass  
mode, press the X-BASS/DEMO (X-  
BASS) button.  
" Equalizer  
When the EQUALIZER (EQ-MODE) button is pressed, the current  
mode setting will be displayed. To change to a different mode, press  
the EQUALIZER (EQ-MODE) button repeatedly until the desired  
sound mode appears.  
FLAT  
The sound is not modified.  
For rock music.  
ROCK  
CLASSIC For classical music.  
For pop music.  
Vocals are enhanced.  
For jazz.  
POPS  
VOCAL  
JAZZ  
" Volume control  
Main unit operation:  
When the VOLUME control is turned  
clockwise, the volume will increase.  
When it is turned counterclockwise,  
the volume will decrease.  
" Surround  
.....  
(
)
0
29 30 MAXIMUM  
To enter the surround mode, press  
the SHIFT button and SUB TITLE/  
SURROUND button on the remote  
control. Repeat this operation to exit.  
Remote control operation:  
Press the VOLUME (+ or -) button to increase or decrease the volume.  
" Subwoofer volume control  
Press the SHIFT button on the re-  
mote control, and adjust the volume.  
Note:  
When the input source is "TUNER" or "AUX", the surround mode is  
not available.  
.....  
(
)
0
29 30 MAXIMUM  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the clock  
XL-DV60  
3 Within 30 seconds, press the PRESET ( or ) button to  
adjust the hour and then press the MEMORY/SET button.  
Press the PRESET ( or ) button once to advance the time  
by 1 hour. Hold it down to advance continuously.  
4 Within 30 seconds, press the PRESET ( or ) button to  
adjust the minutes and then press the MEMORY/SET but-  
ton.  
Press the PRESET ( or ) button once to advance the time  
by 1 minute. Hold it down to advance continuously.  
To confirm the time display:  
Press the CLOCK button.  
The time display will appear for  
about 8 seconds.  
In this example, the clock is set for the 12-hour (AM 12:00) display.  
1 Press the CLOCK button and within 8 seconds, press the  
MEMORY/SET button.  
Note:  
The "CLOCK" or time will flash at the push of the CLOCK button  
when the AC power supply is restored after a power failure or  
unplugging the unit.  
Readjust the clock as follows.  
2 Within 30 seconds, press the PRESET ( or ) button to  
select 12-hour or 24-hour display and then press the MEM-  
ORY/SET button.  
To readjust the clock:  
Perform "Setting the clock" from step 1. If the "CLOCK" is not flash-  
ing in step 1, step 2 (for selecting the 12-hour or 24-hour display) will  
be skipped.  
To change the 12-hour or 24-hour display:  
1
Clear all the programmed contents. [Refer to "Clearing all the  
memory (reset)" on page 53 for details.]  
Perform "Setting the clock" from step 1.  
"AM 12:00"  
"0:00"  
The 12-hour display will appear.  
(AM 12:00 - PM 11:59)  
The 24-hour display will appear.  
(0:00 - 23:59)  
2
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing a disc  
XL-DV60  
Turn on the TV, and switch the input to the "VIDEO 1" or "VIDEO 2",  
etc. accordingly.  
1 Press the ON/STAND-BY button to turn the power on.  
2 Press the DVD/CD button.  
3 Press the OPEN/CLOSE button  
to open the disc compartment.  
All trays open in tiers.  
4 Place the disc on the disc tray 1, label side up.  
Be sure to place 3" (8 cm) discs in the middle of the disc trays.  
5" (12 cm) 3" (8 cm)  
5 To place discs in the trays 2 - 5.  
1. Slide in the tray with a disc to-  
ward the unit.  
2. Place a disc in an empty tray.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XL-DV60  
To play from a specified disc:  
1. Press the 1 - 5 button.  
2. Press the (play) button.  
6 Press the OPEN/CLOSE button to close the disc compart-  
ment.  
Discs supporting auto start will start to play once you close the  
disc tray even if you do not press the (play) button.  
Selected disc number  
7 If playback does not start, press the (play) button.  
Note:  
If a disc tray with no disc is selected, playback will not start, and only  
parentheses of the indicator "( )" disappear.  
Chapter or  
track number Play indicator Selected disc type Playing time  
To remove the discs:  
1. In the stop mode, press the OPEN/CLOSE  
button.  
All trays open in tiers.  
The sound mode in use appears during DVD playback.  
!
When playing a DTS on this unit, sound is not heard from the  
speakers. To listen to the sound, select another audio output in  
the "To change the audio language (audio output)" on page 28.  
2. Remove the disc in the tray 1.  
3. Slide in the tray 1 toward the unit. In the  
same way, remove discs in the trays 2 - 5.  
4. After removing the discs, press the OPEN/  
CLOSE button again.  
When the menu appears on the TV screen:  
On DVD, select an item by using the cursor ( ,  
and press the ENTER button.  
,
or ) button  
Note:  
On video CD, select an item by using the direct number buttons.  
DVD discs cannot be removed in the resume play mode. Press the  
button and then remove the disc.  
To interrupt playback:  
Press the STILL/PAUSE button on the remote  
control.  
Compatibility of the progressive scan TV  
To resume playback from the same point, press  
the (play) button.  
Some progressive scan TVs are not fully compatible with this prod-  
uct, which may cause image distortion. In this case, switch the vid-  
eo mode from "Progressive" to "Interlace" (see page 17).  
Pause indicator  
To stop playback:  
DVD:  
Press the button twice.  
VCD/CD/MP3/JPEG:  
Press the button.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing a disc (continued)  
XL-DV60  
Caution:  
" To resume playback after stopping  
! Do not place two discs in one disc tray.  
! Do not play discs with special shapes (heart  
or octagon shaped) as it may cause malfunc-  
tions.  
(resume play)  
You can resume playback from the point playback is stopped.  
1 While the disc is playing, press  
Pre-Stop  
the button.  
! Do not push the disc compartment while it is moving.  
! If the power fails while the disc compartment is open, wait until the  
power is restored.  
The system stores the point you stopped.  
! If the disc compartment is stopped with force, the unit will not func-  
tion. If this occurs, press the ON/STAND-BY button to enter the  
power stand-by mode and then turn the power on again.  
! If a disc is damaged, dirty, or loaded upside down, the disc will  
skip or not play.  
2 To restart play, press the  
Play  
(play) button.  
Playback resumes from the point you left off.  
! When attempting to play discs with scratches or of a different re-  
gion number, or unplayable or restricted (*1) discs, an error mes-  
sage will appear on the TV display and the disc will not play.  
(*1) Viewing is prohibited on some DVDs according to the audi-  
ence age.  
To cancel resume play:  
Press the button again while "  
Pre-Stop" is lit.  
Stop  
Notes:  
Notes:  
! The resume play feature is disabled on some discs.  
! Depending on the disc, playback may resume slightly before the  
position where it was stopped.  
! When the unit is turned on, no operation is possible for 10 sec-  
onds as the unit is performing the initial setting.  
! Stop positions may be recorded on some discs. When you play  
such a disc, playback stops there.  
! During an operation, " " may appear indicating that the opera-  
tion is disabled by the disc.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic operation  
XL-DV60  
" Fast forward/Fast reverse (search)  
You can search the desired point as you play the disc.  
1 While a disc is playing, hold  
Fast Forward 2x  
down the  
or  
button for 2  
seconds or more.  
The scanning speed will change as follows at each press of the  
button.  
The speed changed as follows on DVD/video CD/audio CD:  
Fast Reverse 2x  
Fast Reverse 8x  
/
/
Fast Forward 2x  
Fast Forward 8x  
Fast Forward 30x  
Play  
Fast Reverse 30x /  
Play  
/
" To locate the beginning of a chapter/track (skip)  
! The speed cannot be changed on MP3 discs.  
You can skip the current chapter (track) to the next or previous.  
! The disc is forwarded by the  
button and reversed by the  
button.  
While a disc is playing, press the  
or  
button.  
Next  
2 Press the (play) button to return to the normal playback.  
Notes:  
! On some discs, the search function is disabled.  
! On DVD, search does not operate across titles.  
! While searching on a DVD or video CD, the sound is not heard  
and the subtitles will not appear.  
! When a search is performed during DVD playback, pictures may  
not be forwarded or reversed in the search speed specified in this  
manual, depending on the disc or the scene being played.  
! Press the  
button to skip to the next chapter (track).  
button to skip to the beginning of the current  
! Press the  
chapter (track). Press the  
ginning of the previous chapter (track).  
button again to skip to the be-  
Notes:  
! Some discs do not display the chapter (track) and the skip feature  
is disabled.  
! On a DVD, you cannot skip across titles.  
! When operating video CD with the P.B.C. function, set the P.B.C.  
to off (see page 35).  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic operation (continued)  
XL-DV60  
" To start playback from the desired point  
(direct play)  
To select and play the desired title and chapter:  
1 While in the stop or playback mode, press the DIRECT but-  
ton.  
2 Within 10 seconds, select the title or chapter by pressing  
the cursor ( or ) button and enter the title or chapter  
number by using the direct number buttons.  
Title number  
Chapter number  
1
01 / 08  
001 / 010  
--:--:--  
If the title or chapter number is 2 digits or more, press "+10" and  
enter the number.  
Example:  
To select chapter 1, press "1".  
To select chapter 12, press "+10" and "2".  
To select chapter 22, press "+10", "+10" and "2".  
3 Within 10 seconds, press the ENTER button.  
Notes:  
! Direct play feature is disabled on some discs.  
! Some discs may not display the chapter number.  
! With DVDs, you can specify the desired point only in the current  
title and not in another title.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XL-DV60  
" Slow-motion play  
You can slow down the playback speed.  
To play by specifying time (time search):  
1 While a disc is playing, press the DIRECT button.  
2 Within 10 seconds, select the time by pressing the cursor (  
1 While a disc is playing, press the STILL/PAUSE button.  
2 Hold down the  
or  
button  
or ) button and specify the time by using the direct number  
buttons.  
Slow Forward  
for 2 seconds or more.  
Time  
Slow Backward  
/
Slow Forward  
1
01/ 08  
001 / 010  
--:--:--  
3 Press the (play) button to return to the normal playback.  
Note:  
! To specify 1 hour 23 minutes and 40 seconds, enter  
On some discs, slow-motion play functions are disabled.  
"012340".  
! If you enter the wrong number, start over from step 1.  
3 Within 10 seconds, press the ENTER button.  
Notes:  
! Some discs cannot play from the specified point.  
! Time search feature is disabled on some discs.  
" Still picture/Frame advance  
You can freeze the image and advance frame by frame.  
1 While a disc is playing, press the  
Pause  
STILL/PAUSE button.  
Each press of the STILL/PAUSE button advances the frame in  
the still mode.  
2 Press the (play) button to return to the normal playback.  
Note:  
Still picture and frame advance features are disabled on some discs.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Useful operation  
XL-DV60  
The subtitle language and the audio language you select during  
playback are reset each time you set this unit to the stand-by mode  
or change the disc. To keep your preferred languages, set them in  
the initial setting screen (see page 42).  
" To change the audio language (audio output)  
During playback, you can change the audio language (audio out-  
put).  
1 While a disc is playing, press  
Audio language information  
the SHIFT button, and then  
press the ZOOM/AUDIO but-  
ton.  
Audio 1/3: AC-3 5.1 English  
2 Repeat step 1 to select the desired audio number.  
When playing DVD, the language changes as follows:  
1: Original <English>  
(Dolby Digital 5.1 ch Surround)  
Audio 1/3: AC-3 5.1 English  
Audio 2/3: AC-3 2 English  
2: English  
(Dolby Digital 2 ch Surround)  
When playing video CD, audio CD and MP3, the sound chang-  
es as follows:  
Mono Left  
Mono Right  
Stereo  
Notes:  
! The audio language on some DVDs may not be changed.  
! For audio language and audio system, refer to the manual of the  
disc.  
! When playing a DTS on this unit, sound is not heard from the  
speakers. To listen to the sound, change the audio language.  
(Example: Dolby Digital 5.1-channel, Dolby Digital 2-channel,  
etc.) However, only the 2.1-channel sound can be reproduced.  
Alternatively, connect to a DTS digital surround amplifier, etc.  
(see page 51).  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XL-DV60  
" To select a title, subtitle or audio language, etc.  
from the top menu or menu of the disc  
You can select a title, subtitle or audio language on your DVD if it  
has a disc menu.  
" To change the subtitle language  
You can change the subtitle language or hide subtitles during play-  
back.  
1 While the disc is playing, press  
Subtitle 01/09: English  
Example  
the SUB TITLE/SURROUND but-  
1 While the disc is stopped or  
ton.  
played, press the TOP MENU/  
RETURN button to display the  
top menu or press the MENU/  
OSD button to display the menu.  
TOP MENU  
2 Within  
3
seconds, press the  
1. Title  
2. Subtitle  
Subtitle 02/09: Spanish  
SUB TITLE/SURROUND button  
repeatedly to select the desired  
subtitle language.  
3. Audio language  
2 Press the cursor ( ,  
,
or ) button to change the setting  
Notes:  
and press the ENTER button.  
! Some DVDs prohibit changing the subtitle language.  
! If no subtitles are recorded on the disc, " " is displayed.  
! It may take a little time to switch the subtitle language to the  
selected one.  
You can also use the direct number buttons for some discs.  
Notes:  
! The subtitle cannot be hidden on some DVDs.  
! The procedure shown here provides only general steps. The  
actual procedure for using the title menu depends on the disc you  
are using. See the disc jacket for details.  
! If the disc you are using does not have a title menu, nothing  
appears on the screen.  
" To change the angle  
You can change the angle of view when playing a DVD video disc  
that contains scenes recorded from multiple angles.  
When " " is displayed in the upper right corner of the TV  
screen, press the ANGLE button repeatedly to select the de-  
sired angle number.  
TV screen  
On the unit  
1
Notes:  
! Some DVDs prohibit changing the angle.  
! Refer to the manual of the disc as the operation may vary  
depending on the disc.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Useful operation (continued)  
XL-DV60  
" To zoom in on an image (zoom)  
You can magnify images during playback.  
1 While a disc is playing, press  
Zoom x 1.5  
the ZOOM/AUDIO button.  
Each press of the ZOOM button cycles through the zoom set-  
tings as follows:  
Zoom x 1.5  
Zoom x 2  
Zoom x 3  
Zoom off  
2 To shift the view and display the desired part of a zoomed  
image, press the cursor ( , or ) button repeatedly.  
,
To return to normal view:  
Press the ZOOM button. Repeat this to select "Zoom off".  
When you cancel the zoom function, you cannot shift the view.  
Notes:  
! An image may become distorted when zoomed.  
! Subtitles cannot be zoomed.  
! For the part currently viewed, refer to the indication in the lower  
left section of the screen.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XL-DV60  
" To brighten an image  
" To improve the image quality  
1 During playback, press the  
SHIFT button, and then press  
the DIGITAL GAMMA button.  
1 During playback, press the  
SHIFT button, and then press  
the DIGITAL PICTURE button.  
OFF  
OFF  
G
G
S
S
2 Within 10 seconds, press the  
2 Within 10 seconds, press the  
cursor ( or ) button to set the  
level.  
cursor ( or ) button to set the  
level.  
ON  
ON  
Level  
Setting  
Level  
Setting  
Level  
Setting  
Normal  
Slightly clearer ON  
Level  
Setting  
OFF  
ON  
Normal image  
ON  
Brighter  
OFF  
ON  
ON  
Clearer  
Slightly brighter ON  
A lot brighter  
A lot clearer  
To restore the original brightness:  
To restore the original image quality:  
In step 2, select "OFF".  
In step 2, select "OFF".  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Useful operation (continued)  
XL-DV60  
" To change the display on TV screen  
You can display or hide the operation indicators on the TV screen.  
While the disc is playing, press the SHIFT button, and then  
press the MENU/OSD button. (The display is changed at each  
operation of these two buttons.)  
When playing video CD and audio CD, the display changes as fol-  
lows:  
When playing DVD, the display changes as follows:  
1
1 / 8  
2 / 10  
00:38:58  
Title playing time  
Total number of chapters  
Current chapter number  
Total number of titles  
Current title number  
Disc number  
L
R
3
1 / 19  
01:02  
Track playing time  
Repeat mode information  
PBC information (VCD)  
Audio information  
Disc type  
L
3
3
1 / 19  
1 / 19  
-03:14  
58:03  
R
Remaining track playing time  
Total playing time  
1
1
1 / 8  
1 / 8  
2 / 10  
2 / 10  
-01:09:50  
00:07:43  
Remaining playing time of  
the current title  
L
R
Chapter playing time  
L
R
3
1 / 19  
-40:37  
Remaining total playing time  
1
1 / 8  
2 / 10  
-00:02:38  
Remaining playing time of  
the current chapter  
1
2
3
4
5
DVD  
8
Titles, 10 Chapters  
DEF 1/9  
DEF 1/3  
1 / 3  
Angle information  
VCD 2.0  
CDDA  
10 Tracks,  
19 Tracks,  
35 Files  
40:47  
58:03  
Repeat mode information  
Audio language information  
Subtitle information  
Data Disc  
Data Disc  
23 Files  
1
2
3
4
5
DVD  
8
Titles, 10 Chapters  
Note:  
VCD 2.0  
CDDA  
10 Tracks,  
19 Tracks,  
35 Files  
40:47  
58:03  
On video CD, total playing time or remaining total playing time  
appears when P.B.C is off (see page 35).  
Data Disc  
Data Disc  
23 Files  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XL-DV60  
" To play repeatedly (repeat play)  
2 Select "Repeat off" by pressing the REPEAT button repeat-  
edly to return to the normal playback.  
You can play a chapter (track) or a title repeatedly by specifying it  
during playback.  
Caution:  
After performing repeat play, be sure to press the button. Other-  
wise, the disc will play continuously.  
1 While the disc is playing, press the REPEAT button.  
TV screen  
On the unit  
Notes:  
! Repeat play is not available on some discs.  
! If you press another button during the repeat play, the playback  
may be canceled.  
! Repeat play is not possible during random play.  
! When operating video CD with the P.B.C. function, set the P.B.C.  
to off (see page 35).  
Chapter Repeat on  
Each time the button is pressed, the repeat play mode changes  
in the following order.  
For DVD, the mode changes as follows:  
Chapter Repeat on  
Title Repeat on  
Repeat off  
, CHAP  
Repeats the chapter  
currently playing.  
, TITLE  
Repeats the title  
currently playing.  
Disappear  
The normal playback.  
For video CD/audio CD, the mode changes as follows:  
Track Repeat on  
Disc Repeat on  
Repeat off  
1
Repeats the track  
currently playing.  
Repeats the disc  
currently playing.  
Disappear  
The normal playback.  
For MP3/JPEG discs, the mode changes as follows:  
File Rep  
Folder Rep  
Disc Rep  
Rep off  
1
Repeats the file currently  
playing. (Only for MP3)  
Repeats the folder  
(directory) currently playing.  
Repeats the disc  
currently playing.  
Disappear  
The normal playback.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Useful operation (continued)  
XL-DV60  
" To play the contents between the specified  
points repeatedly (A-B repeat)  
You can play the desired portion repeatedly by specifying it during  
playback.  
1 While the disc is playing, press the A-B button.  
TV screen  
On the unit  
A-B Set A  
This registers the start point (A).  
2 Press the A-B button again.  
A-B Repeat on  
A-B repeat starts from the start point (A) to the end point (B).  
3 Press the A-B button to return to the normal playback.  
Notes:  
! A-B repeat play is disabled on some discs.  
! Some scenes in DVD may not allow A-B repeat play.  
! A-B repeat play for DVD is possible only within a title.  
! A-B repeat play for video CD and audio CD are possible only  
within a track.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing a video CD  
XL-DV60  
Playing a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 - 24  
To locate the beginning of a chapter/track (skip) . . . . . . . . . . 25  
Fast forward/Fast reverse (search) . . . . . . . . . . . . . . . . . . . . . . 25  
Still picture/Frame advance . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Slow-motion play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
To change the audio language (audio output) . . . . . . . . . . . . 28  
To zoom in on an image (zoom) . . . . . . . . . . . . . . . . . . . . . . . . 30  
To brighten an image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
To improve the image quality . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
To change the display on TV screen . . . . . . . . . . . . . . . . . . . . 32  
To play repeatedly (repeat play) . . . . . . . . . . . . . . . . . . . . . . . . 33  
To play the contents between the specified points  
" To play a video CD with P. B. C.  
(playback control)  
Example  
1 Load a video CD with P.B.C.  
The menu will appear on the  
TV and playback will be  
1
2
3
paused.  
2 Select the desired menu number by using the direct num-  
ber buttons (1 - +10).  
repeatedly (A-B repeat) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
To play in random order (random play) . . . . . . . . . . . . . . . . . . 36  
To start playback from the desired point (direct play) . . . . . . 36  
To play in the desired order (programmed playback) . . . . . . . 37  
Example:  
To select track 14, press "+10" and "4".  
! Playback starts.  
! After playback stops, the menu will reappear, then select the  
menu number you want to play.  
To scroll the menu screen (menu screen with more than 1  
page):  
Press the  
or  
button.  
To stop playback:  
Press the button.  
To play without activating the playback control function:  
You can play a video CD with P.B.C. without activating the playback  
control function.  
In this case, the menu screen will not appear, and the disc will play  
in the same way as a video CD without P.B.C.  
While in the stop mode, press the  
MENU/OSD button to cancel the  
P.B.C. mode.  
Play  
PBC off  
Playback starts.  
Each time you press the button, the setting switches on and off.  
Note:  
Some video CDs with P.B.C. cannot be played back when the P.B.C.  
mode is off.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing an audio CD  
XL-DV60  
Playing a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 - 24  
To locate the beginning of a chapter/track (skip) . . . . . . . . . . 25  
Fast forward/Fast reverse (search) . . . . . . . . . . . . . . . . . . . . . . 25  
To change the audio language (audio output) . . . . . . . . . . . . . 28  
To change the display on TV screen . . . . . . . . . . . . . . . . . . . . 32  
To play repeatedly (repeat play) . . . . . . . . . . . . . . . . . . . . . . . . 33  
To play the contents between the specified points  
" To start playback from the desired point  
(direct play)  
To select and play the desired track:  
While in the stop or playback mode, press the  
direct number buttons to select the track num-  
ber.  
repeatedly (A-B repeat) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
TV screen  
Unit display  
Select: 14  
If the track number is 2 digits or more, press "+ 10" and enter the  
number.  
Example:  
To select track 14, press "+10" and "4".  
To select track 24, press "+10", "+10" and "4".  
Notes:  
! Direct play feature is disabled on some discs.  
! When operating video CD with the P.B.C. function, set the P.B.C.  
to off (see page 35).  
" To play in random order (random play)  
The tracks on the disc can be played in random order automatically.  
To play by specifying time (time search):  
You can play tracks from the desired time point during playback.  
In the stop mode, press the RANDOM button.  
TV screen  
Unit display  
1 While the disc is playing, press the DIRECT button.  
Time  
Play Random  
--:--  
3
1 / 19  
MAX [04:56]  
2 Specify the time with the direct number buttons.  
! Enter minutes and seconds.  
To cancel random play:  
Press the button.  
! To specify 1 hour 23 minutes and 40 seconds, enter "8340".  
! If you enter the wrong number, start over from step 1.  
Notes:  
! On some discs, this function cannot be used.  
! You cannot set the random play while in the playback or pause  
mode.  
3 Within 10 seconds, press the ENTER button.  
! When operating video CD with the P.B.C. function, set the P.B.C.  
to off (see page 35).  
Note:  
36  
Time search feature is disabled on some discs.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XL-DV60  
" To play in the desired order  
(programmed playback)  
You can play back the desired tracks in the sequence you want.  
Maximum of 40 tracks can be programmed.  
6 Press the cursor ( ) button to  
finish programming.  
PROGRAM LIST  
No.  
DISC No.  
INDEX  
1
2
3
Disc-2  
Disc-3  
Disc-4  
Track2  
Track12  
Track8  
1 In the stop mode, press the MEMORY/SET button.  
Information on all loaded discs is read, and then the program-  
ming screen appears.  
7 Use the cursor ( or ) button to  
select a track to start with, and  
press the (play) button.  
PROGRAM LIST  
No.  
DISC No.  
INDEX  
2 Press the cursor ( or ) button  
1
2
3
Disc-2  
Disc-3  
Disc-4  
Track2  
Track12  
Track8  
to select "Add" and press the  
ENTER button.  
! Playback starts from the select-  
ed track and ends after the last  
track in the program.  
PROGRAM LIST  
No.  
DISC No.  
INDEX  
Add  
Insert  
Modify  
Delete  
Clear All  
Exit  
! "MEMORY" lights up on the  
main unit during programmed  
play.  
3 Press the cursor ( or ) button  
to select a disc number and  
press the ENTER button.  
PROGRAM LIST  
No.  
DISC No.  
INDEX  
INDEX  
INDEX  
! Programmed tracks are stored until a disc is removed or you  
turn the power off.  
1
Disc-1  
Disc-2  
Disc-3  
Disc-4  
Disc-5  
To change the programmed contents:  
4 Press the cursor ( or ) button  
to select a track number and  
press the ENTER button.  
1 While stopped, press the MEMORY/SET button to show the pro-  
gramming screen.  
2 Use the cursor ( or ) button to select an item and then press the  
cursor ( ) button.  
3 Use the cursor ( or ) button to select the desired command and  
then press the ENTER button.  
PROGRAM LIST  
No.  
1
DISC No.  
Disc-2  
Track1  
Track2  
Track3  
Track4  
Track5  
Track6  
"Add"  
Adds a track to the program.  
5 Repeat steps 3 - 4 for other  
tracks. Up to 40 tracks can be  
programmed.  
"Insert"  
Inserts a track between programmed tracks. The  
track is inserted above (before) the selected track.  
Modifies the track.  
PROGRAM LIST  
"Modify"  
"Delete"  
"Clear All" Deletes the program.  
"Exit"  
No.  
DISC No.  
1
2
3
4
Disc-2  
Disc-3  
Disc-4  
Track2  
Track12  
Track8  
Deletes the selected track.  
Disc-1  
Disc-2  
Disc-3  
Disc-4  
Disc-5  
If you make a mistake, the pro-  
grammed tracks can be cleared by  
pressing the CLEAR button.  
Turn off the programming screen.  
Note:  
On some discs, programmed play does not work.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing an MP3 and JPEG disc  
XL-DV60  
Playing a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 - 24  
To locate the beginning of a chapter/track (skip) . . . . . . . . . . 25  
Fast forward/Fast reverse (search) . . . . . . . . . . . . . . . . . . . . . . 25  
To change the audio language (audio output) . . . . . . . . . . . . . 28  
To play repeatedly (repeat play) . . . . . . . . . . . . . . . . . . . . . . . . 33  
To play in random order (random play) . . . . . . . . . . . . . . . . . . 36  
To start playback from the desired point (direct play) . . . . . . 36  
You can play CD-R/RW recorded in the MP3 and JPEG formats.  
Load a disc containing MP3 and  
JPEG files.  
1
1/19  
Stereo 00:00:00  
ROOT  
A menu screen appears and playback  
starts automatically.  
ALBUM01  
ALBUM02  
ALBUM03  
ALBUM04  
ALBUM05  
ALBUM06  
ALBUM07  
Folder  
MP3 File  
JPEG File  
Example of playback sequence  
! Playback is performed in the  
order of 1 to 11 in this exam-  
ple.  
ROOT  
Folder  
File  
3
4
5
! Files on some discs cannot  
be played in order.  
1
2
8
9
10  
6
7
11  
When playing JPEG files  
! Playback skips to the next file approx. every 5 seconds.  
! To return to the menu screen, press the button.  
Selecting a folder/file on the menu screen:  
In the stop mode, press the cursor ( or ) button to select a folder/  
file and press the ENTER button.  
Caution:  
If you convert MP3 data to "audio CD" data when recording on a  
CD-R/RW, play it as an audio CD. The MP3 operation cannot be  
performed.  
Note:  
Up to 20 characters can be displayed for a folder name and a file  
name. Underlines, asterisks, and spaces may not be displayed.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XL-DV60  
" Zoom function  
" Rotating a picture  
After pressing the STILL/PAUSE button, press the cursor ( ,  
1 While playback, press the  
ZOOM/AUDIO button.  
Zoom on  
,
or ) button.  
The image rotates as shown below.  
button : 90º rotation in a clockwise direction.  
2 Hold down the  
or  
button  
Zoom 150 Pct  
for 2 seconds or more.  
Use the  
or  
button to switch the zoom setting as follows:  
Zoom 025 Pct  
Zoom 050 Pct  
Zoom 100 Pct  
Zoom 150 Pct  
Zoom 200 Pct  
3 To shift the view and display the desired part of a zoomed  
button : 90º rotation in a counterclockwise direction.  
image, press the cursor ( ,  
,
or ) button repeatedly.  
button : Vertical mirror image.  
Press the button.  
Press the button.  
Press the button.  
Press the button.  
button : Horizontal mirror image.  
To return to normal view:  
Press the ZOOM/AUDIO button again, "Zoom off" will show on the  
screen.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listening to the radio  
XL-DV60  
" Tuning  
1 Press the ON/STAND-BY button to turn the power on.  
2 Press the TUNER (BAND) button repeatedly to select the  
desired frequency band (FM or AM).  
3 Press the TUNING ( or ) button to tune in to the desired  
station.  
Manual tuning:  
Press the TUNING button as many times as required to tune in  
to the desired station.  
Auto tuning:  
When the TUNING button is pressed for more than 0.5 sec-  
onds, scanning will start automatically and the tuner will stop at  
the first receivable broadcast station.  
Notes:  
! When radio interference occurs, auto scan tuning may stop auto-  
matically at that point.  
! Auto scan tuning will skip weak signal stations.  
! To stop the auto tuning, press the TUNING button again.  
To receive an FM stereo transmission:  
Press the TUNER (BAND) button to display the "ST" indicator.  
! " " will appear when an FM broadcast is in stereo.  
! If the FM reception is weak, press the TUNER (BAND) button to  
extinguish the "ST" indicator. The reception changes to monau-  
ral, and the sound becomes clearer.  
FM stereo mode indicator  
FM stereo receiving indicator  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XL-DV60  
" Memorizing a station  
You can store 40 AM and FM stations in memory and recall them at  
the push of a button. (Preset tuning)  
" To recall a memorized station  
Press the PRESET ( or ) button for less than 0.5 seconds to se-  
lect the desired station.  
" To scan the preset stations  
The stations saved in memory can be scanned automatically. (Pre-  
set memory scan)  
1 Perform steps 1 - 3 in "Tuning" on page 40.  
2 Press the MEMORY/SET button to enter the preset tuning  
saving mode.  
1
Press the PRESET ( or ) button for more than 0.5 seconds.  
The preset number will flash and the programmed stations will be  
tuned in sequentially, for 5 seconds each.  
2
Press the PRESET ( or ) button again when the desired sta-  
tion is located.  
3 Within 30 seconds, press the PRESET ( or ) button to  
select the preset channel number.  
Store the stations in memory, in order, starting with preset  
channel 1.  
4 Within 30 seconds, press the MEMORY/SET button to store  
that station in memory.  
If the "MEMORY" and preset number indicators go out before  
the station is memorized, repeat the operation from step 2.  
5 Repeat steps 1 - 4 to set other stations, or to change a pre-  
set station.  
" To erase entire preset memory  
1
2
Press the ON/STAND-BY button to enter the stand-by mode.  
While pressing down the TUNER(BAND) button and the 2 but-  
ton, press the ON/STAND-BY button until "TUNER CL" appears.  
When a new station is stored in memory, the station previously  
memorized will be erased.  
Note:  
The backup function protects the memorized stations for a few hours  
should there be a power failure or the AC power cord get discon-  
nected.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the initial setting of DVD  
XL-DV60  
1 After pressing the button, press the SET UP button.  
2 Press the cursor ( or  
)
Language  
Setup  
button to select the main  
menu and press the ENTER  
button.  
Audio Setup  
Video Setup  
Display Setup  
System Setup  
3 Press the cursor ( or  
)
Language Setup  
button to select the sub-  
menu and press the ENTER  
button.  
OSD Language  
Audio  
English  
English  
English  
English  
Subtitle  
To return to the previous dis-  
play, press the cursor ( ) but-  
ton, or press the SHIFT button  
and then the RETURN button.  
Disc Menu  
Enter  
Submenu  
4 Press the cursor ( or ) button to change the setting and  
press the ENTER button.  
! To return to the previous display, press the cursor ( ) button,  
or press the SHIFT button and then the RETURN button.  
! To change other settings, begin from step 2.  
5 Press the SET UP button.  
The new setting is memorized.  
Note:  
Settings are retained even if the unit is set to the stand-by mode.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XL-DV60  
S ettin g  
Selectab le p aramet ers  
(* indicates initial settings.)  
Description  
Reference  
page  
Language Setup  
OSD Language  
English*  
Français  
Español  
Selects the initial or playback setting language.  
P. 46  
P. 46  
P. 46  
P. 46  
P. 51  
Audio  
English*  
French  
Select a language to play.  
Subtitle  
Disc menu  
English*  
French  
Selects the subtitle displayed on the TV screen.  
Selects the disc menu language.  
English*  
French  
Audio Setup  
Digital output  
LPCM output  
Analog output  
BitStream*  
LPCM  
Select a type of signal sent from the digital audio output jack.  
48 kHz  
96 kHz*  
PCM sound signals recorded in 96 kHz are converted to 48  
kHz.  
Surround  
2.1Ch*  
Select a type of signal sent to the speaker.  
Surround: 2 channel (video CD/audio CD) or 5.1 channel  
(DVD) sound are converted to 2.1 channel  
sound (virtual speaker surround sound).  
2.1ch:  
2 channel (video CD/audio CD) or 5.1 channel  
(DVD) sound are converted to 2.1 channel  
sound (with the subwoofer sound increased).  
Compression  
On  
Off*  
Set to on to enjoy the realistic sound as recorded on the  
disc.  
On:  
Realistic sound is produced as recorded on  
DVD/video CD/audio CD.  
Off:  
The range of signal levels is reduced to moder-  
ate sudden increase in playback volume.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the initial setting of DVD (continued)  
XL-DV60  
Set tin g  
S electab le p arameters  
(* indicates initial settings.)  
Description  
Reference  
page  
Video Setup  
TV screen  
4:3 PS*  
4:3 LB  
16:9  
The screen mode should be set according to the connected  
TV type.  
P. 46  
TV type  
NTSC*  
Auto  
Selects the correct color system (TV standard).  
NTSC:  
Auto:  
Select this mode for the NTSC TV.  
Select this mode for the multi-system TV.  
Video output  
Interlace*  
Progressive  
The video output mode should be set according to the con-  
nected TV type.  
P. 17  
Interlace:  
Select this for a non-progressive scan TV  
(use a video cable, S-video cable, or compo-  
nent video cable).  
Progressive: Select this for a progressive scan TV (use a  
component video cable).  
Picture mode  
Auto  
Film  
For optimize the TV picture when DVD or video CD play-  
back.  
Video  
Smart*  
Auto:  
Images are automatically optimized accord-  
ing to the video source.  
Film:  
Suitable for progressive video output. Select  
this setting for DVD movies, etc.  
Video:  
Smart:  
Suitable for interlaced video output. Select  
this setting for DVD karaoke, etc.  
Optimize special effects for progressive vid-  
eo output.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XL-DV60  
S ettin g  
Selectab le p aramet ers  
(* indicates initial settings.)  
Description  
Reference  
page  
Display Setup  
Angle mark  
On*  
Off  
Select whether to display " " (On) or not (Off).  
Select whether to use a screen saver (On) or not (Off).  
P. 29  
Screensaver  
On  
Off*  
On: Press the button. After 5 minutes or more of inactiv-  
ity, a screen saver appears.  
To turn off the screen saver on the screen, press any  
button on the main unit or remote control.  
Off: Cancel the screen saver setting.  
Closed caption  
On  
Off*  
Select whether to display the closed caption (On) or not  
(Off).  
On: The closed caption data (subtitles) appear on the TV  
screen automatically.  
You can see the closed caption data when playing  
DVD discs (with "CC" on the jacket) on this unit.  
Off: Cancel the closed caption setting.  
System Setup  
Rating Level  
1G  
2
3 PG  
4 PG 13  
5
6 PG-R*  
7 NC-17  
8 Adult  
No Limit  
Sets a restriction level for DVD viewing.  
P. 47  
Please enter a 4-digit  
password.  
(Default setting: 6629)  
Password  
----------  
----------  
Password setting.  
P. 47  
P. 47  
Restore Info  
This resets all settings, except for "Rating Level" and "Pass-  
word", to the factory defaults.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the initial setting of DVD (continued)  
XL-DV60  
" Language  
" Video format  
Indicator  
Setting  
Indicator  
4:3 LB  
Setting  
OSD Lan- A language for screen display can be set, such as for  
guage  
When playing a wide image  
initial settings or messages.  
(16:9) disc, black bands are  
inserted at the top and bot-  
tom and you can enjoy full  
wide images (16:9) on a 4:3  
size TV.  
English  
French  
Close  
Fermer  
A 4:3 disc is played in 4:3.  
Audio  
A language for audio can be set.  
4:3 PS  
When playing a wide image  
(16:9) disc, the left and right  
sides of the image are cut  
(pan scan) to display a natu-  
ral-looking 4:3 size image.  
You can specify a language for conversation and nar-  
ration.  
English  
French  
A wide image disc without  
pan scan  
is played back  
in 4:3 letterbox.  
Subtitle  
A language for subtitle can be set.  
A 4:3 disc is played in 4:3.  
The subtitles are displayed in a specified language.  
16:9  
A wide image (16:9) is dis-  
played when playing a wide  
image (16:9) disc.  
English  
French  
Thank you  
Merci  
! When playing a 4:3 image disc, the image size de-  
pends on the setting of the connected TV.  
Disc  
menu  
A language for disc menus can be set.  
Menu screens are displayed in a specified language.  
! If you play back a wide image (16:9) disc with the  
unit connected to a 4:3 TV, images appear  
stretched vertically.  
English  
French  
CAST  
STAFF  
ACTEURS  
PERSONNEL  
Note:  
When playing the disc with a fixed video format, it will not change  
even if the TV screen size is changed.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XL-DV60  
" Rating level setting  
" To change the password  
Indicator  
Setting  
1 After pressing the button, press the SET UP button.  
1 G  
Only DVD software intended for children can be  
played back.  
2 Press the cursor ( or ) button to select "System Setup"  
and press the ENTER button.  
2
Only DVD software intended for general use and  
children can be played back.  
3 Press the cursor ( or ) button to select "Password" and  
press the ENTER button.  
3 PG  
4 PG 13  
5
6 PG-R  
7 NC-17  
4 Enter a 4-digit old password with the direct number but-  
tons on the remote control.  
8 Adult  
DVD software of any grade (adult/general/children)  
can be played back.  
(Default setting: 6629)  
5 Enter a 4-digit new password with the direct number but-  
tons on the remote control.  
No Limit  
Notes:  
Rating level control is canceled.  
6 Enter the new password again for confirmation.  
7 Press the SET UP button.  
! To change the rating level, enter a 4-digit password. It is set to  
6629 by default.  
! While playing a disc with parental lock, the display may appear  
requesting a password in order to watch some restricted scenes.  
In such a case, enter the password to temporarily change the  
parental level.  
When you forget your password  
1
2
After pressing the button, press the SET UP button.  
Press the cursor ( or ) button to select "System Setup" and  
press the ENTER button.  
3
4
Press the cursor ( or ) button to select "Restore Info" and press  
the ENTER button.  
Enter 2486 with the direct buttons and then press the ENTER but-  
ton.  
When reset is done according to this method, all settings, includ-  
ing the settings for password and rating level, will be reset to the  
factory defaults.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Timer and sleep operation  
XL-DV60  
Timer playback:  
The unit turns on and plays the desired source (DVD, video CD,  
audio CD, MP3 disc, tuner) at the preset time.  
" Timer playback  
Before setting timer:  
1 Press the CLOCK button to check that the clock is set to the cor-  
rect time. (Refer to page 21.)  
Sleep operation:  
You can set the system to the power stand-by mode at the specified  
time.  
2 Load the discs to be played.  
1 Press the ON/STAND-BY button to turn the power on.  
2 Press the DVD/CD or TUNER (BAND) button to select the  
desired function.  
When you select the TUNER (BAND), tune into the desired sta-  
tion.  
3 Adjust the volume using the VOLUME buttons.  
Do not turn the volume up too high.  
4 Press the TIMER/SLEEP button repeatedly until " " is dis-  
played and then within 8 seconds, press the MEMORY/SET  
button.  
5 Within 30 seconds, press the PRESET ( or ) button to  
specify the hour to start, then press the MEMORY/SET but-  
ton.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XL-DV60  
To reset or change the timer setting:  
Perform "Timer playback" from the beginning.  
6 Within 30 seconds, press the PRESET ( or ) button to  
specify the minute to start, then press the MEMORY/SET  
button.  
Note:  
When performing timer playback using an-  
other unit connected to the VIDEO/AUX  
jacks, select "VIDEO/AUX" in step 2.  
At this time, only this unit will be turned on or  
enter the power stand-by mode automatical-  
ly. It will enter the power stand-by mode 1  
hour after the playback starts. However, the  
other unit will not be turned on or off.  
! Settings are displayed in order and the unit will enter the tim-  
er stand-by mode.  
! Timer set indicator will light up.  
To cancel the timer playback:  
Press the ON/STAND-BY button to turn the power on.  
7 When the preset time is reached, playback will start.  
The volume will increase gradually until it reaches the volume  
you were listening to before your system entered the timer  
stand-by mode.  
8 The unit will enter the power stand-by mode one hour after  
the timer playback starts.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Timer and sleep operation (continued)  
XL-DV60  
" Sleep operation  
" To use timer and sleep operation together  
Example: To fall asleep and wake up to the same radio station  
You can play back the same source only (the function cannot be  
switched).  
1 Play back the desired sound source.  
2 Press the TIMER/SLEEP button repeatedly until "SLEEP" is  
displayed and then within 8 seconds, press the MEMORY/  
SET button.  
1 Set the sleep time (see left, steps 1 - 3).  
2 While the sleep timer is set, set the timer playback (steps 4  
- 6, pages 48 - 49).  
Sleep timer setting Timer playback setting  
5 minutes - 3 hours  
To change the sleep time:  
While the sleep time is displayed, press the PRESET ( or  
button.  
)
(Maximum: 3 hours - Minimum: 5 minutes)  
Sleep operation will  
automatically stop.  
Timer playback  
start time  
3:00  
(cancel)  
2:00  
1:30  
1:00  
0:05  
0:10  
0:15  
0:30  
3 Within 30 seconds, press the MEMORY/SET button.  
4 The unit will enter the power stand-by mode automatically  
after the preset time has elapsed.  
The volume will be turned down 30 seconds before the sleep  
operation finishes.  
To confirm the remaining sleep time:  
Press the TIMER/SLEEP button while the sleep timer is set.  
The remaining sleep time is displayed for about 8 seconds.  
To cancel the sleep operation:  
Press the ON/STAND-BY button while the sleep timer is set.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Enhancing your system  
XL-DV60  
The connection cord is not included. Purchase a commercially avail-  
able cord as shown below.  
" Listening to the playback sounds from VCR,  
DVD, etc.  
1 Use a connection cord to connect the VCR, DVD, etc. to the  
VCR, DVD, etc.  
VIDEO/AUX IN jacks.  
When using video equipment, connect the audio output to this  
unit and the video output to a television.  
White  
To the  
2 Press the ON/STAND-BY button to turn the power on.  
3 Press the VIDEO/AUX button.  
line output  
jacks  
Red  
4 Play the connected equipment.  
White  
Red  
Note:  
To prevent noise interference, place the unit away from the televi-  
sion.  
Audio cable  
(commercially available)  
" Digital connection to a surround amplifier or a  
digital audio recorder, etc.  
Dolby Digital/DTS amplifier or  
Digital audio recorder etc.  
Selecting a sound signal type  
When connecting other equipment to the digital audio output, ad-  
just the audio output setting accordingly (see page 43).  
BitStream  
Choose this when connecting the unit to a Dolby Digital/DTS  
(5.1ch) surround amplifier. When playing a DVD recorded in Dol-  
by Digital or DTS, bitstream output allows you to enjoy the 5.1ch  
surround sound.  
To the  
optical line  
input jack  
Optical digital cable  
(commercially available)  
LPCM  
Choose this for PCM output. When playing a DVD recorded in Dol-  
by Digital, the output converts to 2 channel PCM. When a DVD re-  
corded in DTS is played back, signals are sent in bitstream.  
" Headphones  
! Before plugging in or unplugging the headphones, reduce the vol-  
ume.  
! Be sure your headphones have a 1/8" (3.5 mm) diameter plug  
and impedance between 16 and 50 ohms. The recommended  
impedance is 32 ohms.  
! Plugging in the headphones disconnects the speakers automati-  
cally. Adjust the volume using the VOLUME control.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting chart  
XL-DV60  
Many potential problems can be resolved by the owner without call-  
ing a service technician.  
If something is wrong with this product, check the following before  
calling your authorized SHARP dealer or service center.  
" DVD player  
Symptom  
Possible cause  
! Is the TV turned on?  
! Is the input of TV switched?  
No images are  
displayed.  
" General  
!
The video mode may not match the jacks you  
are using. Change the mode as follows.  
While in the stop mode, press the SHIFT but-  
ton and DIRECT/VIDEO MODE button on  
the remote control a few times (see page 17).  
Symptom  
Possible cause  
The clock is not  
set to the correct  
time.  
! Did a power failure occur? Reset the clock.  
(Refer to page 21.)  
Even though a  
disc is loaded,  
"No Disc" is dis-  
played.  
! Is the disc loaded upside down?  
! Is the disc very dirty?  
When a button is ! Set the unit to the power stand-by mode and  
pressed, the unit  
does not re-  
spond.  
then turn it back on.  
! Does the disc satisfy the standards?  
! Is the unit located near excessive vibrations?  
! If the unit still malfunctions, reset it. (Refer to  
page 53.)  
No sound is  
heard.  
! Is the volume level set to "0"?  
Playback sounds ! Is condensation formed inside the unit?  
are skipped.  
! Are the headphones connected?  
! Are the speaker wires disconnected?  
! Is the TV or amplifier volume level set to "0"?  
The control but-  
tons do not func-  
tion. Music or  
video playback is  
interrupted.  
! Is the disc very dirty?  
! Does the disc satisfy the standards?  
! Is the unit located near excessive vibrations?  
! Is condensation formed inside the unit?  
! Is the disc very dirty?  
Noise is heard  
during playback.  
! Move the unit away from any computers or  
mobile phones.  
Pictures and  
sound are  
skipped.  
The power is not ! Is the unit unplugged?  
turned on.  
! Is the unit located near excessive vibrations?  
! Is condensation formed inside the unit?  
" Remote control  
The unit does not ! Is a disc other than a DVD (region number 1  
Symptom  
Possible cause  
operate even if  
the power is on.  
or ALL), video CD, audio CD, CD-R or CD-  
RW loaded?  
The remote con- ! Is the AC power cord of the unit plugged in?  
trol does not op-  
erate.  
Images cannot  
be played back.  
(Sound is not  
heard.)  
! Is a disc other than a DVD (region number 1  
or ALL), video CD, audio CD, CD-R or CD-  
RW loaded?  
! Is the battery polarity correct?  
! Are the batteries dead?  
! Is the distance or angle incorrect?  
! Is the disc very dirty?  
! Does the remote control sensor receive  
strong light?  
! Is the disc loaded upside down?  
! Is the optical pickup dirty?  
! Is the TV input set to video (VIDEO1,  
VIDEO2, etc.)?  
! Is the unit turned on?  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XL-DV60  
" Tuner  
" Clearing all the memory (reset)  
1
Press the ON/STAND-BY button to enter the power stand-by  
mode.  
Symptom  
Possible cause  
The radio makes ! Is the unit placed near the TV or computer?  
unusual noises  
continuously.  
2
While pressing down the DVD/CD button and the 2 button,  
press the ON/STAND-BY button until "CLEAR" appears.  
! Is the FM antenna or AM loop antenna  
placed properly? Move the antenna away  
from the AC power cord if it's located nearby.  
" Condensation  
Caution:  
Sudden temperature changes, storage or operation in an extremely  
humid environment may cause condensation inside the cabinet  
(laser pickup, etc.) or on the transmitter on the remote control.  
Condensation may cause the unit to malfunction. If this happens,  
leave the power on with no disc in the unit until normal playback is  
possible (about 1 hour). Wipe off any condensation on the transmit-  
ter with a soft cloth before operating the unit.  
When you reset, all data is deleted and the settings return to the  
default. (DVD initial settings are retained.)  
" Before transporting the unit  
Remove all discs from the unit. Make sure there is no disc in the disc  
tray. Then, set the unit to the power stand-by mode. Carrying the  
unit with discs left inside can damage the unit.  
" If trouble occurs  
When this product is subjected to strong external interference  
(mechanical shock, excessive static electricity, abnormal supply  
voltage due to lightning, etc.) or if it is operated incorrectly, it may  
malfunction.  
Error indicators and warnings  
When you load an unplayable disc or fail to perform operations prop-  
erly, the following messages are displayed on the TV screen.  
If such a problem occurs, do the following:  
1
2
Set the unit to the stand-by mode and turn the power on again.  
If the unit is not restored in the previous operation, unplug and  
plug in the unit, and then turn the power on.  
TV screen  
Meaning  
The disc cannot be played with this  
system or it is loaded in an incor-  
rect way.  
Disc Error  
Note:  
If neither operation above restores the unit, clear all the memory by  
resetting it.  
The region number of the DVD is  
not "1" or "ALL".  
Wrong Region  
The disc does not support the oper-  
ation described in this operation  
manual.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance  
Specifications  
XL-DV60  
As part of our policy of continuous improvement, SHARP reserves  
the right to make design and specification changes for product  
improvement without prior notice. The performance specification fig-  
ures indicated are nominal values of production units. There may be  
some deviations from these values in individual units.  
" Cleaning the laser pickup lens  
In order to ensure proper operation of the DVD player, preventative  
maintenance (cleaning of the laser pickup lens) should be per-  
formed periodically. Lens cleaners are commercially available. Con-  
tact your local DVD software dealer for options.  
" General  
" Cleaning the cabinet  
Periodically wipe the cabinet with a soft cloth and a diluted soap  
solution, then with a dry cloth.  
Power source  
AC 120 V, 60 Hz  
Power consumption 116 W  
Dimensions  
Weight  
Width: 6-5/16" (160 mm)  
Height: 9-7/16" (240 mm)  
Depth: 12-9/16" (319 mm)  
Caution:  
! Do not use chemicals for cleaning (gasoline, paint thinner, etc.). It  
may damage the cabinet finish.  
! Do not apply oil to the inside of unit as this may cause malfunc-  
tions.  
12.3 lbs. (5.6 kg)  
" Amplifier  
" Care of discs  
Discs are fairly resistant to damage, however mistracking can occur  
due to an accumulation of dirt on the disc surface. Follow the guide-  
lines below for maximum enjoyment from your disc collection and  
player.  
Output power  
Front speakers: 37.5 watts minimum RMS  
per channel into 6 ohms from 100 Hz to 20  
kHz, 10% total harmonic distortion  
Subwoofer: 45 watts minimum RMS into 6  
ohms from 70 Hz to 130 Hz, 10% total  
harmonic distortion  
! Do not write on either side of the disc, particularly the non-label  
side from which signals are read. Do not mark this surface.  
! Keep your discs away from direct sunlight, heat, and excessive  
moisture.  
! Always hold the discs by the edges. Fingerprints, dirt, or water on  
the discs can cause noise or mistracking. If a disc is dirty or does  
not play properly, clean it with a soft, dry cloth, wiping straight out  
from the center, along the radius.  
Audio output  
terminals  
Front speakers and subwoofer: 6 ohms  
Headphones: 16 - 50 ohms  
(recommended: 32 ohms)  
Optical digital output: Square type  
1
Audio input  
terminals  
Video/Auxiliary (audio signal): 500 mV/47 k  
ohms  
NO  
YES  
Correct  
Video output  
terminals  
Video output: RCA type  
1
S-video output: S-terminal  
1
Component video output: RCA type  
(Pr/Cr, Pb/Cb, Y)  
3
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XL-DV60  
" DVD player  
" Front speaker  
Type  
5-disc multi-play compact disc player  
NTSC color  
Type  
2-way type speaker system  
(magnetic shield)  
Signal readout  
1-9/18" (4 cm) semi dome tweeter  
4" (10 cm) woofer  
75 W  
Supported disc  
types  
DVD (region number 1, ALL), video CD,  
audio CD, CD-R, CD-RW  
Video signal  
Horizontal resolution: 500 lines  
S/N ratio: 75 dB  
Maximum input  
power  
Rated input power  
Impedance  
37.5 W  
6 ohms  
Audio signal  
Frequency  
characteris- 20 kHz (sampling rate: 48  
Linear PCM DVD: 30 Hz to  
tics  
kHz)  
Dimensions  
Width: 6-1/2" (165 mm)  
Height: 9-7/16" (240 mm)  
Depth: 9-3/8" (238 mm)  
30 Hz to 20 kHz  
(sampling rate: 96 kHz)  
CD: 30 Hz to 20 kHz  
CD: 95 dB (1 kHz)  
Linear PCM DVD: 92 dB  
CD: 92 dB  
Weight  
5.1 lbs. (2.3 kg)/each  
S/N ratio  
Dynamic  
range  
" Subwoofer  
Type  
Subwoofer system (magnetic shield)  
5-1/8" (13 cm) woofer  
Total har-  
monic distor-  
tion ratio  
0.14 %  
Maximum input  
power  
90 W  
Rated input power  
Impedance  
45 W  
" Tuner  
6 ohms  
Frequency range  
FM: 87.5 - 108 MHz  
AM: 530 - 1,720 kHz  
Dimensions  
Width: 6-5/16" (160 mm)  
Height: 9-7/16" (240 mm)  
Depth: 11-1/4" (285 mm)  
Weight  
7.3 lbs. (3.3 kg)  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONSUMER LIMITED WARRANTY  
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when shipped in its original con-  
tainer, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof  
with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.  
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of which has  
been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in  
design or construction.  
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer.  
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED WARRANTIES INCLUDING  
THE WARRANTIES OF MERCHANTABILITYAND FITNESS FOR USEARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW.  
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.  
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any  
warranties beyond the time period described herein on behalf of Sharp.  
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser.  
Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the  
purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event  
shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone  
other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some states  
do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you.  
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.  
Model Specific Section  
Your Product Model Number & Description:  
XL-DV60 DVD Micro System  
(Be sure to have this information available when you need service for your Product.)  
Warranty Period for this Product:  
One (1) year parts and labor from the date of purchase.  
Additional Item(s) Excluded from Warranty Coverage (if any): Non-functional accessories, supplies, and consumable items.  
Where to Obtain Service:  
At a Sharp Authorized Servicer located in the United States.  
To find a location of the nearest SharpAuthorized Servicer, call Sharp toll free at 1-800-BE-SHARP.  
What to do to Obtain Service:  
Ship prepaid or carry in your Product to a Sharp Authorized Servicer.  
Be sure to have Proof of Purchase available. If you ship the Product, be sure it is insured and  
packaged securely.  
TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP.  
SHARP ELECTRONICS CORPORATION  
Printed in China  
TINSEA046SJZZ  
05B N AO 1  
Sharp Plaza, Mahwah, New Jersey 07430-2135  
SHARP CORPORATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sharp Microwave Oven R 1750 User Manual
Silex technology Network Card SX 500 User Manual
Sony Computer Drive USM128U2 User Manual
Sony Headphones MT15029 User Manual
Sony Personal Computer VGC LT30 User Manual
StarTechcom Computer Hardware PCISOUND5CH2 User Manual
Sterling Plumbing Indoor Furnishings 11445 NA User Manual
Stovax Stove Large Wood Multi fuel User Manual
Sunbeam Mixer JM3250 User Manual
Tamarack Technologies Ventilation Hood HV1000 User Manual