DVD Video Player
MODEL
DV-MX1U
OPERATION MANUAL
DV-MX1
PROGRESSIVE
POWER
STOP
PLAY
EJECT
LABEL-SIDE
The region number for this DVD player is 1.
Please read this Operation Manual carefully
before using your DVD Video Player.
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFEGUARDS
1) Read Instructions - All the safety and operating instruc-
14) Lightning - For added protection for this product during a
lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet
and disconnect the antenna or cable system. This will pre-
vent damage to the product due to lightning and power-
line surges.
tions should be read before the product is operated.
2) Retain Instructions - The safety and operating instructions
should be retained for future reference.
3) Heed Warnings - All warnings on the product and in the
operating instructions should be adhered to.
15) Power lines - An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact with
them might be fatal.
4) Follow Instructions - All operating and use instructions
should be followed.
5) Cleaning - Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
6) Attachments - Do not use attachments not recommended
by the product manufacturer as they may cause hazards.
16) Overloading - Do not overload wall outlets, extension
cords or integral convenience receptacles as this can
result in a risk of fire or electric shock.
7) Water and Moisture - Do not use this product near water
- for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a swimming pool;
17) Object and Liquid Entry - Never push objects of any kind
into this product through openings as they may touch
dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any
kind on the product.
and the like.
PORTABLE CART WARNING
8) Accessories - Do not place this prod-
uct on an unstable cart, stand, tri-
pod, bracket or table. The product
may fall, causing serious injury to a
child or adult, and serious damage
to the product. Use only with a cart,
18) Servicing - Do not attempt to service this product yourself
as opening or removing covers may expose you to dan-
gerous voltage or other hazards. Refer all servicing to qual-
ified service personnel.
S3125A
stand, tripod, bracket or table recom-
mended by the manufacturer or sold
19) Damage Requiring Service - Unplug this product from the
wall outlet and refer servicing to qualified service person-
nel under the following conditions:
with the product. Any mounting of the product should
follow the manufacturer’s instructions, and should use a
mounting accessory recommended by the manufacturer.
a) When the power-supply cord or plug is damaged,
9) A product and cart combination should be moved with
care. Quick stops, excessive force and uneven surfaces
may cause the product and cart combination to overturn.
b) If liquid has been spilled, or objects have fallen into the
product,
c) If the product has been exposed to rain or water,
10) Ventilation - Slots and openings in the cabinet are pro-
vided for ventilation and to ensure reliable operation of
the product and to protect it from overheating, and these
openings must not be blocked or covered. The openings
should never be blocked by placing the product on a bed,
sofa, rug or other similar surface. This product should not
be placed in a built-in installation such as a bookcase or
rack unless proper ventilation is provided or the manufac-
turer's instructions have been adhered to.
d) If the product does not operate normally by follow-
ing the operating instructions. Adjust only those con-
trols that are covered by the operating instructions as
an improper adjustment of other controls may result
in damage and will often require extensive work by a
qualified technician to restore the product to its normal
operation,
e) If the product has been dropped or damaged in any
way, and
11) Power Sources - This product should be operated only
from the type of power source indicated on the mark-
ing label. If you are not sure of the type of power supply
to your home, consult your product dealer or local power
company. For products intended to operate from battery
power, or other sources, refer to the operating instruc-
tions.
f) When the product exhibits a distinct change in perfor-
mance - this indicates a need for service.
20) Replacement Parts - When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer or have the same character-
istics as the original part. Unauthorized substitutions may
result in fire, electric shock or other hazards.
12) Grounding or Polarization - This product may be equipped
with a polarized alternating-current line plug (a plug hav-
ing one blade wider than the other). This plug will fit into
the power outlet only one way. This is a safety feature. If
you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact
your electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
21) Safety Check - Upon completion of any service or repairs
to this product, ask the service technician to perform safe-
ty checks to determine that the product is in proper oper-
ating condition.
22) Heat - The product should be situated away from heat
sources such as radiators, heat registers, stoves or other
products (including amplifiers) that produce heat.
13) Power-Cord Protection - Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience recep-
tacles, and the point where they exit from the product.
–
–
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PREFACE
Setting the Main Unit
Table of Contents
You can install this unit horizontally or vertically. Attach the Foot to
the bottom of the unit (for Horizontal installation) or bottom of the
Stand (for Vertical installation).
PRECAUTIONS
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
PREFACE
Setting the Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Symbols Used in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Supplied Accessory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
About Copyright. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Copy Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Copyright Warning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Notice for Progressive Scan Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Nonuse Periods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
No Fingers or Other Objects Inside. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Location and Handling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Warning of Dew Formation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Stand
Foot
(supplied)
(supplied/1 set)
Bottom of the unit
Horizontal installation (laying position):
Place the unit as POWER comes on your right.
ABOUT THE DISCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Playable Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Unplayable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
ABOUT THE REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Installing the Batteries for the Remote Control . . . . . . . . . . . . . . . . . . . . 7
Operable Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
label
SETUP
Hint
CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
• Insert a disc with the label facing up.
Connection to a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
RF Modulator Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Connection to an Audio System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Rear Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Vertical installation (standing position):
Place the unit as its dent matches the catch of the Stand. As you posi-
tion the unit be sure POWER is located at the top.
FUNCTIONS
PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
DISC Menu / Resume / Paused and Step-by-Step Playback /
Fast Forward/Reverse Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Slow Forward/Slow Reverse / Zoom / Rapid Play / Playing
the Disc Recorded in VR Mode (Video Recording Format) . . . . . . . 11
D
V-
M
X
1
Catch
MP3 PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
ONSCREEN DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
label
1
X
M
-
D
V
SEARCH FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Track Search / Title/Chapter Search / Time Search . . . . . . . . . . . . . . . . 13
MARKER SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Stand
Front
REPEAT / RANDOM / PROGRAMMED PLAYBACK . . . . . . . . . . . .14
Hint
Repeat Playback / Repeat A-B Playback / Random Playback /
Programmed Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
• Insert a disc with its label facing to the left.
SPECIAL SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Subtitle Language / Audio Language / Camera Angles /
Black Level Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Stereo Sound Mode / Virtual Surround . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
DVD SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Symbols Used in This Manual
The following symbols appear in some headings and notes in
this manual.
QUICK SETUP Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
CUSTOM Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
LANGUAGE Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
DISPLAY Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
AUDIO Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
PARENTAL Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
OTHERS Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Reset to the Default Setting (except for PARENTAL Setting). . . . . . . 19
Description refers to playback of DVD-Video discs (includ-
ing DVD-RW/-R and DVD+RW/+R discs (Video mode only)).
Description refers to playback of VR mode (Video Recording
format). The VR mode (Video Recording format) is a record-
ing mode to enjoy editing the program or manual mode
for recording in desired resolution and time.
INFORMATION
Description refers to playback of Audio CDs.
LANGUAGE LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
TROUBLESHOOTING GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
SERVICE INFORMATION FOR THE U.S.. . . . . . . . . . . . . . . . . . . . .20
Description refers to playback of MP3 discs.
ESPAÑOL
IMPORTANTES MEDIDAS DE SEGURIDAD Y PRECAUCIONES . . . . . .22
CONSUMER LIMITED WARRANTY . . . . . . . . BACK COVER
Supplied Accessory
• Remote control with two
AA size batteries
• Video/Audio cables
• Foot (1 set)
• Stand
• Operation Manual
DVD Video Player
MODEL
DV-MX1U
OPERATION MANUAL
D
V
-
M
X
1
U
P
R
O
G
R
E
S
S
I
E
POWER
STOP
P
L
A
Y
E
J
E
C
T
L
A
B
E
L
-
I
E
1
–
–
EN
4
Download from Www.Somanuals.com. All Manuals Search And Download.
• Do not place the unit in direct sunlight, or near heat sources.
• Depending on the environment, the temperature of the unit may
increase slightly. This is not a malfunction.
About Copyright
Unauthorized copying, broadcasting, public performance and lending
of discs are prohibited.
• Keep the unit away from strong magnetic objects.
Copy Protection
This unit supports Macrovision copy protection.
On DVD discs that include a copy protection code, if the contents of
the DVD disc are copied using a VCR, the copy protection code pre-
vents the videotape copy from playing normally.
• Do not place any object containing water or other liquids on the
unit. In the event that liquid should enter the cabinet, unplug the
unit immediately and contact the retailer or service center approved
by SHARP immediately.
• Do not remove the unit’s cabinet. Touching parts inside the cabinet
could result in electric shock and/or damage to the unit. For service
and adjustment inside the cabinet, call a qualified dealer or service
center approved by SHARP.
U.S. Patent Nos. 4,631,603; 4,819,098; 4,907,093; 5,315,448; and
6,516,132.
• Be sure to remove a disc and unplug the AC power cord from the
output before carrying the unit.
This product incorporates copyright protection technology that
is protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized
by Macrovision, and is intended for home and other limited view-
ing uses only unless otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
Warning of Dew Formation
Dew may form inside the unit under the following conditions:
• Immediately after a heater is turned on.
• In a steamy or humid room.
• When the unit is suddenly moved from a cold to warm environment.
If dew forms inside this unit, it may not operate properly. In such case,
turn on the power and wait for more than 2 hours for the moisture to
evaporate.
Copyright Warning
It is the intent of SHARP that this product be used in full compliance
with the copyright laws of the United States and that prior permission
be obtained from copyright owners whenever necessary.
Notice for Progressive Scan Outputs
Maintenance
Servicing
1. Please refer to relevant topics in the “TROUBLESHOOTING GUIDE”
on page 20 before returning the product.
Consumers should note that not all high definition television sets are
fully compatible with this product and may cause artifacts to be dis-
played in the picture. In case of picture problems with 525 progres-
sive scan output, it is recommended that the user switch the connec-
tion to the ‘standard definition’ output. If there are questions regarding
your TV set compatibility with this 525p DVD player, please contact
our customer service center.
2. Do not attempt to service this unit yourself. Instead, unplug it and
contact a SHARP Approved Service Center for inspection.
(See CONSUMER LIMITED WARRANTY at the end of this manual.)
“Licensed under one or more of U.S. Pat. 4,972,484, 5,214,678,
5,323,396, 5,530,655, 5,539,829, 5,544,247, 5,606,618, 5,610,985,
5,740,317, 5,777,992, 5,878,080, or 5,960,037.”
3. Be sure the service technician uses authorized replacement parts
or their equivalents. Unauthorized parts may cause fire, electrical
shock, or other hazards.
4. Following any service or repair, be sure the service technician per-
forms safety checks to certify that this unit is in safe operating order.
5. If this unit becomes inoperative, do not try to correct the prob-
lem by yourself. There are no user-serviceable parts inside. Turn off,
unplug the power plug, and please call our help line mentioned on
page 20 to locate an Authorized Service Center.
Cleaning the Cabinet
• Use a soft cloth slightly moistened with a mild detergent solution. Do
not use a solution containing alcohol, spirits, ammonia or abrasive.
NOTE:
This unit can be used only where the power supply is AC
120 V, 60 Hz. It cannot be used elsewhere.
Laser Diode Properties
Material:
Wave length:
CD:
Emission Duration: Continuous
Laser output: Max. 0.8 mW
GaAs
DVD: 655 nm
790 nm
Cleaning Discs
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the
disc from the center out. Do not wipe in a circular motion.
• Do not use solvents such as benzine, thinner, commercially avail-
able cleaners, detergent, abrasive cleaning agents or antistatic spray
intended for analog records.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
Recommended Measures for Optimum Picture Excellence
This unit is a precision device constructed using extremely accurate
technology.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater
Systems, Inc.
• The disc cannot be played if the disc drive component is worn out
or if the internal pick up lens is dirty.
is a trademark of DVD Format/Logo Licensing Corporation.
• If this unit still does not perform properly although you refer to
the relevant sections and to “TROUBLESHOOTING GUIDE” on page
20, the laser optical pickup unit may be dirty. Consult a SHARP
Approved Service Center for inspection and cleaning of the laser
optical pickup unit.
Nonuse Periods
• When the unit is not being used, switch the unit to the standby
mode.
• When left unused for a long period of time, the unit should be
unplugged from the household AC outlet.
Disc Handling
• When you handle a disc, hold it by its edge and try not to touch the
surface of the disc.
• Always store a disc in its protective case when it is not used.
No Fingers or Other Objects Inside
Do not put your fingers or objects in the disc slot.
Location and Handling
• Do not place anything directly on top of the unit. Do not place the
unit directly on top of the TV.
• Depending on the TV, noise or disturbance of the picture and/or
sound may be generated if the unit is placed too close to your TV.
In this case, please ensure enough space between your TV and the
unit.
• Do not cover or place the unit in enclosed spaces to prevent exces-
sive temperature build up.
–
–
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
ABOUT THE DISCS
Playable Discs
Recorded
signals
Playable discs
Mark (logo)
Region code
Disc types
DVD-Video
*1, 2, 3
OR
DVD-RW
DVD-R
* 1, 3, 4, 5,
6, 8, 9
&YBNQMF
5JUMFꢀꢁ
5JUMFꢀꢂ
Digital video
(MPEG2)
$IBQUFSꢀꢁ $IBQUFSꢀꢂ $IBQUFSꢀꢃ $IBQUFSꢀꢄ $IBQUFSꢀꢁ $IBQUFSꢀꢂ
DVD+RW
DVD+R
* 1, 3, 4, 5,
7, 8, 9
&YBNQMF
Audio CD
* 3, 5, 10
Digital audio
5SBDLꢀꢁ
5SBDLꢀꢂ
5SBDLꢀꢃ
5SBDLꢀꢄ
5SBDLꢀꢅ
5SBDLꢀꢆ
CD-RW
CD-R
* 3, 4, 5,
8, 9, 10
.1ꢀ
Digital audio
&YBNQMF
(SPVQꢀꢁ
(SPVQꢀꢂ
or
MP3
5SBDLꢀꢁ
5SBDLꢀꢂ
5SBDLꢀꢅ
5SBDLꢀꢆ
5SBDLꢀꢃ
5SBDLꢀꢄ
Only 5 inch discs are available on this unit.
Unplayable Discs
• NEVER play back the following discs. Otherwise, malfunction
may result:
3 inch (8 cm) disc, DVD-RAM, CD-I, Photo CD, Video CD, DVD with
region codes other than 1 or ALL, DVD-ROM for personal computers,
CD-ROM for personal computers
If you cannot play back a disc which bears one of the marks
above, check the following notes.
*1: This unit conforms to the NTSC color system. Discs recorded in
other color systems such as PAL cannot be played back.
*2: Certain DVD-Video discs do not operate as described in this
manual due to the intentions of the disc’s producers.
*3: Scratched or stained discs may not be played back.
*4: Some discs cannot be played back because of incompatible
recording conditions, characteristics of the recorder or special
properties of discs.
Hint
• Never insert a disc which is broken or abnormal shape (other than
5 inch (12 cm) round disc).
• Do not use a single CD adaptor which makes 3 inch (8 cm) to 5
inch (12 cm) disc.
*5: You can play back discs which bear the marks above. If you use
nonstandardized discs, this unit may not play them back. Even if
they are played back, the sound or video quality will be compro-
mized.
• On the following disc, the sound MAY NOT be heard.
Super Audio CD
*6: Depending on the recording status of a disc, the disc may not
be played back at all or normally (the picture or sound may not
be smooth, etc.). In this case, you need to finalize the disc with
the DVD recorder. Refer to the manual accompanying the DVD
recorder.
*7: Only the discs recorded in the video mode and finalized can be
played back. Unfinalized discs cannot be played back. Depending
on the recording status of a disc, the disc may not be played back
at all or the picture or sound may not be smooth, etc.
Hint
• Only the sound recorded on the normal CD layer can be delivered.
The sound recorded on the high density Super Audio CD layer
cannot be delivered.
• Any other discs without compatibility indications.
*8: If the recorded portion of the disc is too small (less than 2 3/16
inches (55 mm) across), it may not play back properly.
*9: Do not glue paper or put stickers on to the disc. These may dam-
age the disc, and the unit may not read it correctly.
*10: Also DTS CD is available when the unit is connected to the DTS
decoder.
:This label indicates playback compatibility with DVD-RW discs
recorded in VR mode (Video Recording Format).
Hint
• This unit cannot play back the DVD-RW/-R recorded of the once-
copy programs.
• This unit cannot play back the DVD-R discs recorded in VR mode
(Video Recording Format).
–
–
EN
6
Download from Www.Somanuals.com. All Manuals Search And Download.
ABOUT THE REMOTE CONTROL
Disc type
Button
(Alphabetical order)
SEARCH
MODE
POWER DISPLAY
EJECT
AUDIO
ꢀ
ꢃ
ꢆ
ꢁ
ꢄ
ꢇ
ꢉ
ꢂ
ꢅ
1
2
5
8
0
3
6
SUB
TITLE
4
• To select chapter or title
directly.
• To select track directly.
ANGLE
ꢈ
7
9
REPEAT
A-B
CLEAR
ꢊꢀꢉ
+10
PAUSE
SKIP
• To move the cursor and deter- • To move the cursor and deter-
mine its position. mine its position.
%.4%2
PLAY
REV
FWD
STOP
SETUP
MODE
ZOOM
TOP MENU
MENU
!ꢀ"
• To repeat between your cho- • To repeat between your cho-
ENTER
sen point A and B.
sen point A and B. (CD)
RETURN
• To change the camera angle
to see the sequence being
played back from a different
angle. (DVD-Video)
!.',%
—
DVD VIDEO PLAYER
!5$)/
• To select a desired audio lan- • To select a desired sound
guage or sound mode
.
mode. (CD)
Installing the Batteries for the Remote
Control
Install two AA size batteries (supplied) matching the
polarity indicated inside battery compartment of the
remote control.
• To clear the markers. (CD)
• To remove status number in
program input.
• To clear the markers.
• To clear the numbers entered
incorrectly.
#,%!2
• To clear the numbers entered
incorrectly.
• To cancel the point for A-B
repeat.
• To cancel the point for A-B
repeat. (CD)
Hint
• Do not mix alkaline and manganese batteries.
• Do not mix old and new batteries.
$)30,!9
• To display the current disc
mode.
• To display the current disc
mode.
%*%#4
• To eject the disc.
• To eject the disc.
• To search forward/backward
through a disc.
• To begin slow forward/reverse
playback during the pause
mode.
2%6
&7$
• To search forward/backward
through a disc.
-%.5
• To call up the menu on a disc. • To call up the file list. (MP3)
• To set rapid play off/x1.3/x0.8. • To arrange the playing order
Operable Range
Keep in mind the following when using the remote
control:
• Make sure that there is no obstacle between the
remote control and the remote sensor on the unit.
-/$%
• To set black level on/off.
or play randomly.
• To set virtual surround on/off. • To set virtual surround on/off.
• To pause disc playback.
• To advance playback one
frame at a time.
0!53%
• To pause disc playback.
• The maximum operable range as follows;
Line of sight:
approximately 23 feet (7 m)
• To begin disc playback.
• To turn the unit on or off.
• To begin disc playback.
• To turn the unit on or off.
0,!9
Either side of center:
approximately 16 feet (5 m) within 30 degrees
Above: approximately 16 feet (5 m) within 15 degrees
Below: approximately 10 feet (3 m) within 30 degrees
0/7%2
• To play a track or disc repeat-
edly. (CD)
• To play a track, group or disc
repeatedly. (MP3)
2%0%!4
• To play a chapter or title
repeatedly.
DV-MX1
PRGRESSIVE
ER
P
2%452.
• To return to the previous
operation.
• To return to the previous
operation.
• To search track.
• To search chapter, title or time.
• To rapidly return to a location
of disc.
3%!2#(
-/$%
• To search time. (CD)
• To rapidly return to a location
of disc.
• Search the markers.
• Search the markers. (CD)
3%450
• To enter the setup mode or to • To enter the setup mode or to
change setup items.
change setup items.
3+)0
• To skip chapters or titles.
• To skip tracks.
34/0
• To stop playback.
• To stop playback.
—
35"
4)4,%
• To select subtitles on a disc.
• To return to the top file of the
highest hierarchy in the pro-
gram and file list. (MP3)
4/0 -%.5
• To call up the top menu on a
disc. (DVD-Video)
://-
• To magnify the part of the
picture. (x2/x4)
—
–
–
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
CONNECTIONS
Connection to a TV
CAUTION:
• Be sure to turn off the unit and equipment to be connected before connecting.
• Read through the Operation Manual for the equipment to be connected.
• Be sure that the colors of the jacks and plugs match up when connecting the cable.
• Be sure to keep the unit connection cables separate from the TV antenna cable when you install the unit, because it may cause electrical
interference when you are watching television programs.
D
V-
M
X
1
PROGRESSIVE
POWER
STOP
CAUTION:
• Connect the unit directly to the TV. Do not connect the unit to a VCR, then con-
PLAY
EJECT
LABEL-SIDE
This unit
nect the VCR to the TV. Copyright protection in the VCR could distort the picture
playing on the unit.
VCR
T V
Method 1
Good picture
Method 2
Better picture
Method 3
Best picture
Basic Audio
COMPONENT
VIDEO IN
AUDIO IN
T V
Y
Y
L
R
VIDEO IN
S-VIDEO IN
PB
PR
CB
CR
or
Video cable
(supplied)
S-video cable
(commercially
available)
Audio cable
(supplied)
Component
video cable
(commercially
available)
This unit
(Analog) AUDIO OUT
VIDEO OUT
S-VIDEO OUT
COMPONENT VIDEO OUT
Hint
• The unit is sending each video signals simultaneously. If you connected an S-VIDEO OUT and/or a COMPONENT VIDEO OUT with the VIDEO
OUT, make sure your TV’s input mode is set correctly according to the connection you made.
• If you want to listen to the audio through audio equipment, connect only the S-video, component video cable or video cable to the TV.
• You will not be able to hear all of the sound being output by the unit if you use the video/audio cable (supplied) to a monaural TV that has
only one audio input jack.
If your TV is compatible with 525 progressive scanning and you want to enjoy that high quality picture;
You must select the connection Method 3 above and progressive scanning mode. To set the mode, set “PROGRESSIVE” to “ON” in the DISPLAY
menu, so that the PROGRESSIVE indicator on the front panel lights on. See pages 16, 17 for more details.
• When “PROGRESSIVE” is “ON”, video signals from the unit’s VIDEO OUT and S-VIDEO OUT jacks will be distorted or not be output at all.
If your TV is not compatible with progressive scanning;
Use this unit in interlace mode and set “PROGRESSIVE” to “OFF” either in the DISPLAY menu or by pressing and holding PLAY B on the front of the
unit for more than 5 seconds, so that the PROGRESSIVE indicator on the front panel lights off.
RF Modulator Connection
If your TV has Antenna input jack only, it is still possible to connect this unit to your TV by using a STEREO AUDIO/VIDEO RF Modulator
(commercially available).
In this case, follow the instructions below.
1. Connect the AUDIO/VIDEO output jacks of this unit to the AUDIO/
VIDEO input jacks of your RF Modulator by audio and video cables.
(Back of this unit)
Antenna
Cable
Signal
(Back of TV)
2. The antenna input jack of your TV may have been already occupied.
If so, disconnect the RF cable from your TV, and then connect the
RF cable to your RF Modulator (usually marked “ANT IN”).
Stereo Audio/Video RF Modulator
1
(commercially available)
AC 120V ANT IN
CHANNEL
TO TV VIDEO
AUDIO
3
4
R
L
3. Connect your RF modulator to your TV by another RF cable.
Video/Audio
cables
4. Set your RF modulator’s channel 3/4 switch to either 3 or 4, whichever the
TV channel is least used in your area. If your RF modulator has a Modulator/
Antenna switch, set it according to your RF modulator’s manual.
5. Turn on your TV and choose the same channel as you set the RF mod-
ulator’s channel 3/4 switch to. For more details, follow the instructions
supplied with the RF Modulator.
(supplied)
2
RF cable
3 (commercially available)
Antenna input jack
Hint
• The quality of picture may become poor if the unit is connected to an RF Modulator.
–
–
EN
Download from Www.Somanuals.com8. All Manuals Search And Download.
Connection to an Audio System
Method 1
Method 2
Dolby Digital decoder, DTS decoder,
MD deck or DAT deck
Stereo system
Analog audio
input jacks
AUDIO
COAXIAL
L
R
Coaxial digital
audio cable
Audio cable
(supplied)
(commercially available)
This unit
(Analog) AUDIO OUT
DIGITAL AUDIO OUT
Setting
Setting
SETUP > (QUICK) >
SETUP > (QUICK) >
DOLBY DIGITAL
DTS
DOLBY DIGITAL
DPCM
DTS
OFF
Connection
Connecting to Stereo System.
Connection
Connecting to a Dolby Digital
or DTS decoder for Dolby
Digital or DTS audio output.
BITSTREAM
* To complete these settings, refer to pages 16, 18.
Hint
Connecting to the other
equipment (an MD deck or
DAT deck etc.) without Dolby
Digital decoder.
• Playing back a DVD using incorrect settings may generate noise
distortion and may also damage the speakers.
• AUDIO OUT jacks are not available on the DTS audio.
DPCM
OFF
* To complete these settings, refer to pages 16, 18.
C
Digital Connection to Audio Equipment or MD deck without a Dolby Digital Decoder
• Audio CD
Hint
Audio CDs can be transferred digitally to other equipment such as
an MD deck or DAT deck, play the disc as you would normally with
the connection shown above. Audio CDs recorded in the DTS for-
mat cannot be transferred digitally or via analog.
• The audio source on a disc in a Dolby Digital 5.1 channel surround
format cannot be recorded as digital sound by an MD or DAT
deck.
• Some Audio CDs have a short silent section between musical tracks.
When sound from discs such as these is digitally recorded by con-
necting the unit directly to a digital recorder (such as an MD deck or
DAT deck), the music may be recorded continuously and track num-
bers may be lost.
• Playing back a DVD using incorrect settings may generate noise
distortion and may also damage the speakers.
• By hooking this unit up to a Multi-channel Dolby Digital decoder,
you can enjoy high-quality Dolby Digital 5.1 channel surround
sound as heard in the movie theatres.
• DVD
DVDs recorded in Dolby Digital 5.1 channel surround sound or DTS
cannot be connected digitally to external recording equipment
such as an MD deck or DAT deck.
It may be possible to record “Dolby Digital” via a digital connection
if the unit’s output is set to “DPCM” (see page 18 “AUDIO Setting”).
Analog recording is possible but not for DTS recorded audio.
• By hooking this unit up to the DTS decoder, you can enjoy 5.1
channel surround system which reproduces the original sound as
truthfully as possible. 5.1 channel surround system is developed
by the Digital Theater System Inc.
Rear Terminals
1. DIGITAL AUDIO OUT COAXIAL jack
3. VIDEO OUT jack
Connect an optional coaxial digital audio cable
Connect the supplied video cable (yellow) here
through the TV’s video input jack.
4. COMPONENT VIDEO OUT jacks
Connect an optional component video cable
here through the component video input jacks
of TV.
here through the coaxial digital audio input
jack of a decoder or audio receiver.
1
2
2. AUDIO OUT jacks
Connect the supplied audio cable (red/white)
here through the audio input jacks of a TV or
other audio equipment.
5. S-VIDEO OUT jack
3
4
Connect an optional S-video cable here
through the S-video input jack of a TV.
5
–
–
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS
PLAYBACK
Before: Turn on the TV, amplifier and any other equipments which
are connected to this unit. Make sure the TV and audio receiver (com-
mercially available) are set to the correct channel.
Resume
(
page 12
)
Press STOP C during playback.
Resume message will appear on the
TV screen.
Resume ON
Hint
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
Press PLAY B, playback will resume
from the point at which playback was
stopped.
You can change the On-Screen language in “PLAYER MENU” setting.
(Refer to pages 16, 17.)
DV-MX1
PROGRESSIVE
<Example : DVD>
1
4
3
POWER
STOP
SEARCH
POWER
AUDIO
DISPLAY
MODE
EJECT
Hint
PLAY
1
1
4
2
5
8
0
3
6
• To cancel resume, press STOP C one more time during the stop
mode. On some discs, STOP C will not work while the Resume
message appears. Please wait until the message disappears.
SUB
TITLE
EJECT
ANGLE
REPEAT
A-B
7
9
CLEAR
LABEL-SIDE
+10
PAUSE
SKIP
• For MP3, playback will resume from the beginning of the track at
which playback was stopped.
• The resume information will be kept even when the power is
turned off.
PLAY
3
4
REV
FWD
STOP
SETUP
MODE
ZOOM
TOP MENU
MENU
ENTER
RETURN
2
DVD VIDEO PLAYER
Paused and Step-by-Step Playback
Press PAUSE F during playback.
• Playback will be paused and sound will be muted.
To continue playback, press PLAY B.
Insert a disc with label
1.
3.
2.
4.
facing to the left.
LABEL-SIDE
The disc goes forward by one frame each time PAUSE F is pressed
during the pause mode.
To continue playback, press PLAY B.
Hint
To start playback.
To stop playback.
• On DVDs, set “STILL MODE” to “FIELD” in the DISPLAY menu if pic-
tures in the pause mode are blurred. (Refer to pages 16, 17.)
Fast Forward/Reverse Search
Hint
• When you play MP3 files, details are on page 12.
Press FWD g or REV h repeatedly during play-
E
1
back to select the required forward or reverse speed.
• A “prohibited icon” may appear at the top-right on the TV
screen when the operation is prohibited by the disc or this
unit.
• Some DVDs may start playback from title 2 or 3 due to specific
programs.
• During the playback of a 2-layered disc, pictures may stop for a
moment. This happens while the 1st layer is being switched to the
2nd layer. This is not a malfunction.
To continue playback, press PLAY B.
Hint
• On DVDs, set “STILL MODE” to “FIELD” in the DISPLAY menu if pic-
tures during Fast Forward and Reverse Search are blurred.
• A DVD-RW disc recorded in the VR mode may freeze momentarily
during playback depending on how the playlist was made and
edited (deleted titles, repeated recording).
• For DVDs, Fast Forward or Reverse Search speed is different
depending on the disc.
•
For DVDs, approximate speed is 1(x2), 2(x8), 3(x20), 4(x50) and 5(x100).
• For Audio CDs and MP3, approximate speed is 1(x2), 2(x8) and
3(x30).
DISC Menu
Some discs contain menus which allow you to customize disc playback.
Use Cursor K / L / s / B or the Number buttons to select an item,
then press ENTER or PLAY B.
• For Audio CDs and MP3, sound will be output during Fast Forward
or Reverse Search.
Calling up a Menu Screen (for playback of a DVD Video)
• Press MENU to call up the DVD menu.
• Press TOP MENU to call up the title menu.
Hint
• If the feature is not available,
screen.
symbol may appear on the TV
• Menu operations may vary depending on the disc. Refer to the
manual accompanying the disc for more details.
–
–
EN
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Slow Forward/Slow Reverse
2.
3.
Press ENTER to switch among “
(x1.3)”, “ (x0.8)” and “OFF”.
or
or
Press FWD g or REV h repeatedly during the
pause mode to select the required forward or reverse
speed.
1
:
:
:
Plays back approximately at 0.8 times of normal playback.
Plays back approximately at 1.3 times of normal playback.
No effects.
To continue playback, press PLAY B.
OFF
Hint
To continue normal playback, press PLAY B.
• Slow Forward or Reverse speed is different depending on the disc.
Approximate speed is 1(1/16), 2(1/8) and 3(1/2).
•
On DVDs, set “STILL MODE” to “FIELD” in the DISPLAY menu if pic-
tures in the slow playback mode are blurred. (Refer to pages 16, 17.)
Zoom
Hint
•
Audio (language) setting cannot be changed while using this mode.
• Virtual Surround and Black Level Setting cannot be changed while
using this mode.
• Virtual Surround does not function while using this mode.
• This feature may not work at some point in a disc.
• When using digital audio connection, the DPCM sound will be
output.
The zoom function allows you to enlarge the video image and to pan
through the enlarged image.
During playback, press ZOOM.
1.
2.
3.
Playing the Disc Recorded in VR Mode
(Video Recording Format)
• The picture becomes twice as large.
Press ZOOM repeatedly to change the
zoom factor: “x2”, “x4” or “OFF”.
DVDs recorded in VR mode can have a PLAYLIST assigned to alter the
order or content to be played. If a PLAYLIST has been created, you can
choose the ORIGINAL or PLAYLIST option.
Press MENU in stop mode.
1.
Once a desired zoom factor is set, use
Cursor K / L / s / B to move the
zoomed picture across the screen.
ORIGINAL
PLAYLIST
1 ORIGINAL1
2 ORIGINAL2
3 ORIGINAL3
4 ORIGINAL4
5 ORIGINAL5
• The current setting screen will appear.
• Pressing MENU during playback is not valid.
2.
3.
or
4.
To exit zoom function, press ZOOM repeatedly to select “OFF”.
ORIGINAL
PLAYLIST
1 PLAYLIST1
2 PLAYLIST2
3 PLAYLIST3
4 PLAYLIST4
5 PLAYLIST5
ORIGINAL : A list of titles which are recorded with a DVD recorder.
PLAYLIST : A list of titles which is made based on the ORIGINAL
edited list.
Hint
•
Zooming function does not work while the disc menu is showing up.
• x4 zoom is not available on some discs.
To select the desired title.
• Zooming function is also available during pause mode.
ORIGINAL
or
1 ORIGINAL1
2 ORIGINAL2
Rapid Play
3 ORIGINAL3
or
4 ORIGINAL4
5 ORIGINAL5
Rapid Play function is available only during playback.
Available only on discs recorded in the Dolby Digital format, Rapid
Play plays back in slightly faster/slower speed with sound that is close
to normal playback quality.
To decide.
Hint
1.
During playback, press MODE.
• PLAYLIST will not be displayed when it has not been made.
• Resume playback will not be possible if you change the setting.
OFF
• When discs recorded in VR mode, changing the audio (MAIN,
SUB or MAIN+SUB) is effective only when using an analog con-
nection. Although you may be able to change the settings of the
on-screen display, it will not affect the sound when using a digital
connection.
• The current setting appears.
–
–
EN
Download from Www.Somanuals.c1om1. All Manuals Search And Download.
MP3 PLAYBACK
MP3 is a method of compressing files. You can copy MP3 files on CD-RW/-Rs from the computer and play back the files on this unit.
Hint
Insert a MP3-format disc, then press MENU to call up the FILE LIST on
• Some selections may take a while to be recognized.
• Press TOP MENU to return to the 1st item.
• Press MENU or RETURN to go back to the opening display.
• Folders are known as Groups; files are known as Tracks.
• Folders and MP3 files are displayed respectively as and
the TV screen.
1.
FILE LIST
DISC NAME
FOLDER
MP3
folder name
folder name
folder name
folder name
1
2
3
4
or
.
file name
file name
1
2
•
A maximum of 255 folders or 999 files may be recognized in one disc.
ENTER
PLAY
1/
2
• Up to 8 hierarchies can be recognized in one folder. Files in the
folder name
1
9th or deeper hierarchies cannot be played back.
When selecting the folder:
• This unit can play back sounds from data recorded in MP3 format
on CD-RW/-R discs.
• A file with an extension of “.mp3 (MP3)” is called an “MP3 file”.
• The unit can run an image file conforming to the Exif specification.
Exif is a file format, Exchangeable Image File format established
by Japan Electronics and Information Technology Industries
Association (JEITA).
• Press Cursor B when you want to go to the next hierarchy.
• Press Cursor s when you want to go back to the previous
hierarchy (except for the top hierarchy).
2.
• Files whose extension is other than “.mp3 (MP3)” will not be listed
in the MP3 menu.
Refer to “Resume” on page 10.
• If the file is not recorded in MP3 format, noise may be produced
even if the file extension is either “.mp3 (MP3)”.
• The name of group and track can be displayed in up to 25 charac-
ters. Unrecognisable characters will be replaced with asterisks.
• Unplayable groups or tracks may be displayed depending on the
recording conditions.
• If TOP MENU is pressed when a FILE LIST is displayed, the 1st item
will be highlighted.
This unit recommends the files recorded under the following
circumstances:
Applicable MP3 file
Sampling frequency:
Remarks
For MP3 file recorded in Variable
Bit Rate (VBR), the unit may not
display the actual elapsed time.
44.1 kHz or 48 kHz
Constant bit rate:
32 kbps ~ 320 kbps
ON-SCREEN DISPLAY
You can check the information about the current disc by pressing DISPLAY on the remote control.
Each time you press DISPLAY, On-Screen Display changes as examples below.
Current playback status
Angle icon, appears only when avail-
able on the DVD.
4/12 0:03:21 - 0:02:15
T
1
2
Remaining time of the current track
Elapsed time of the current track
T (Track):
Current track number / Total tracks
Current playback status
11/16 0:00:00 - 0:03:30
1
Remaining time of the current chapter
Elapsed time of the current chapter
ALL:
C (Chapter):
Current chapter number /
Total chapters
Current track number / Total tracks
4/12 0:13:45 - 0:45:40
T
Current repeat setting appears only
when the repeat setting is active.
T
A
: Track repeat
: All tracks repeat
: A-B repeat
1/3 0:00:00 - 1:23:45
2
3
Remaining time of the current title
Elapsed time of the current title
A
B
Remaining time of the entire disc
Elapsed time of the entire disc
T (Title):
Current title number / Total titles
3
Hint
• When you are playing a disc in PROGRAM or RANDOM mode,
T
L1
2
“
PROGRAM” (or “RANDOM”) will be displayed instead of
.
Layer numbers, appears only when
playing a two-layered disc.
L0
L1
:
:
Layer 0 is playing
Layer 1 is playing
Current playback status
TRACK 01
1
2
Current repeat setting appears only
when the repeat setting is active.
The name of the file currently in play-
back will be displayed.
C
T
:
:
:
Chapter repeat
Title repeat
A-B repeat
T (Track):
Current track number / Total tracks
A
B
1/36 0:01:15
T
BIT RATE: The amount of audio and
video data currently being read.
Current Repeat setting, if active
T
G
A
:
:
:
Track repeat
Group (folder) repeat
Disc repeat
A
ORG
List status
ORG
PL
Elapsed playing time of the cur-
rent track
:
:
Original is playing
Playlist is playing
PROGRAM
RANDOM
3
4
Current repeat setting appears only
when the repeat setting is active.
or
C
T
:
:
:
:
Chapter repeat
Title repeat
A-B repeat
(Only when you are playing a disc in PROGRAM or
RANDOM mode.)
A
B
A
All repeat
4
–
–
EN
12
Download from Www.Somanuals.com. All Manuals Search And Download.
SEARCH FUNCTION
Track Search
2.
/12
within 30 seconds.
Using SEARCH MODE
1.
/29
/29
Using SKIP H /
G
1.
Current Chapter
(C)
2.
C 1 C 2 C 3 C 4
within 30 seconds.
SKIP
SKIP
H
G SKIP
or
Current Title
(T)
Hint
•
T 1 T 2 T 3 T 4
For the discs with less than 10 tracks, press the track number directly.
• +10 button can also bring up the Track Search display.
H
G SKIP
(If the disc has no chapters.)
• For discs with 10 or more but less than 100 tracks, to play a single-
digit track, press 0 first, then the track number (e.g. for track 3,
press 0, 3). To play a double-digit track, press the track number.
• For discs with 100 or more tracks, to play a single or a double-digit
track, press 0 first, then the track number (e.g. for track 3, press 0,
0, 3, and for track 26, press 0, 2, 6). To play a triple-digit track, press
the track number.
Hint
• Depending on the disc being played, this function can also be
performed by directly entering the desired chapter number with
the Number buttons. Refer to the manual accompanying the
disc.
• SEARCH MODE dose not work during Programmed or Random
Playback.
Time Search
Using SKIP H /
G
Current Track
(T)
1.
1.
TOTAL
1:29:00
T 1 T 2 T 3 T 4
SKIP
H
G SKIP
Press SEARCH MODE repeatedly until “ ” appears.
Hint
2.
• SKIP H / G are not available when playback is stopped.
Previous tracks cannot search at Random Playback by using SKIP H.
TOTAL
1:29:00
•
within 30 seconds.
Title / Chapter Search
Hint
Using SEARCH MODE
• When there is no need to enter a number, “0” appears automati-
cally. For example, “0: 0_ : _ _” appears in the Time Search display if
the total time of the title or track is less than 10 minutes.
1.
/12
• Press CLEAR to erase the incorrect input at step
2.
Press SEARCH MODE once for the Chapter Search.
Press SEARCH MODE twice for the Title Search.
MARKER SETUP
2.
or
This feature allows you to assign a specific point on a disc to be called
back later.
To set a marker
3.
1.
At the desired marker
• Playback will restart from the specific point which you set.
Press SEARCH MODE repeatedly until the Marker display appears.
To exit the Marker display
or
2.
1.
3.
Hint
• The Marker display will disappear in about 30 seconds when there
is no input.
• To clear a marker, select the marker to be cleared at step 2 in the
section “To set a marker” or “To return to the marker later”, and
then press CLEAR.
To return to the marker later
1.
• Ejecting the disc or turning off the power will erase all markers.
• Selecting “AC” at step 2 in the section “To set a marker” or “To
return to the marker later” will also erase all markers.
Press SEARCH MODE repeatedly until the Marker display appears.
• You can mark up to 10 points.
–
–
EN
Download from Www.Somanuals.c1om3. All Manuals Search And Download.
REPEAT / RANDOM / PROGRAMMED PLAYBACK
Repeat Playback
Random Playback
This function shuffles the playing order of tracks instead of playback in
the sequence.
Repeat function is available only during playback.
1.
1.
RANDOM
CD-DA
TOTAL 0:45:55
RANDOM PROGRAM
--no indication--
Each time you press REPEAT, repeat function changes as examples below.
Press twice.
PLAY
OFF
(repeat off)
2.
(current chapter repeat)
(current title repeat)
CHAPTER
TITLE
Hint
• To repeat the current track in the random selections, press
REPEAT repeatedly until “ TRACK” appears during playback.
OFF
(repeat off)
• To repeat the entire random selections, press REPEAT repeatedly
until “ ALL” appears during playback.
CHAPTER
TITLE
ALL
(current chapter repeat)
(current title repeat)
(entire disc repeat)
Programmed Playback
You may determine the order in which tracks will play.
1.
PROGRAM
CD-DA
TOTAL 0:00:00
T
T
T
T
T
T
T
1
2
3
4
5
6
7
3:31
4:28
4:19
3:58
4:12
4:02
3:55
(repeat off)
OFF
ENTER
Press once.
1/
1
1/
3
PLAY
T
1
3:31
CLEAR
TRACK
ALL
(current track repeat)
(entire disc repeat)
2.
PROGRAM
CD-DA
TOTAL 0:08:22
T
T
4
3:58
T
T
15 3:18
16 4:24
16 4:24
ALL CLEAR
or
ENTER
1/
1
3/
3
(repeat off)
PLAY
OFF
T
16 4:24
CLEAR
• Up to 99 tracks can be ordered.
• If 8 or more tracks were in a program, use SKIP H / G to
(current track repeat)
(current group repeat)
(entire disc repeat)
TRACK
GROUP
ALL
see all the tracks.
• While a MP3 folder is open:
–
Press Cursor B when you want to go to the next hierarchy.
– Press Cursor s when you want to go back to the previous
hierarchy (except for the 1st hierarchy).
– Press TOP MENU when you want to go back to the 1st
hierarchy.
Hint
• Repeat setting will be cleared when moving to another title, chap-
ter, track or group.
3.
• Repeat playback may not function with some discs or during
Repeat A-B Playback.
Hint
Repeat A-B Playback
• Press CLEAR at step 2 to erase the most recently entered track.
• To erase all programmed tracks at once, select “ALL CLEAR’’ and
press ENTER at step 2.
1.
A-
• While a program is being played back, STOP C works as follows:
- Press STOP C and PLAY B next, so that the programmed play-
back restarts. (CD playback restarts from the current point. MP3
playback restarts from the beginning of the current track.)
At your desired starting point (A)
- Press STOP C twice and PLAY B next, so that playback restarts
from the first track in the original order. However, your pro-
grammed playback can be restarted when you follow the above
steps. (Your programs are still stored until either the disc is
ejected or power is turned off.) On some discs, STOP C will not
work while the Resume message appears. Please wait until the
message disappears.
2.
A-B
At your desired end point (B)
• Point B should be in the same title or track as point A.
Hint
• To repeat the current track in the program, press REPEAT repeat-
edly until “ TRACK’’ appears during playback.
• To exit the sequence, press A-B so that “OFF” appears.
• To cancel Point A, press CLEAR.
• To repeat the entire program, press REPEAT repeatedly until
• This function does not work in the other repeat modes.
“
ALL’’ appears during playback.
–
–
EN
14
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL SETTINGS
Subtitle Language
Hint
• The sound mode cannot be changed during playback of discs not
recorded in double sound.
• Audio language selection cannot be made during Rapid Play.
This unit allows you to select a subtitle language (if available) during
DVD playback.
(Refer to page 11.)
• If your language is not shown after pressing AUDIO several times,
the disc may not have that language. However, some discs allow
you to change multiple audio languages setting in the disc menu.
(Operation varies depending on the disc, so refer to the manual
included in the disc.)
1.
1.ENG/6
• When “NOT AVAILABLE” appears on the TV screen, it means no
Subtitles can be
audio is recorded on the scene.
varied on the
Each time you press SUBTITLE,
subtitle language changes as example below.
displayed number.
• If you choose a language that has 3-letter-language code, the
code will be displayed every time you change the audio language
setting. If you choose any other languages, “---” will be displayed
instead. (Refer to page 19.)
Current subtitles
language.
(no subtitles)
OFF
For VR mode only:
ENG
(English subtitles)
•
Pressing AUDIO cycles the sound mode through MAIN, SUB, MAIN + SUB.
• DVD-RW discs recorded in double sound (2 languages) can be
played back in either sound mode of MAIN, SUB or MAIN + SUB.
• With discs recorded in VR mode, changing the audio (MAIN, SUB
or MAIN+SUB) is effective only when using an analog connection.
Although you may be able to change the settings of the on-screen
display, it will not affect the sound when using a digital connection.
(French subtitles)
FRE
To Set Subtitle ON/OFF
Mode
AUDIO OUTPUT
Main Audio
Main Audio
Sub Audio
Display on the TV screen
L
R
L
R
L
R
1.
1.ENG/6
MAIN
MAIN
SUB
SUB
Sub Audio
2.
or
OFF
or press SUBTITLE
repeatedly until
“OFF” appears.
Main Audio
Sub Audio
MAIN
SUB
MAIN+
SUB
Camera Angles
Hint
• If your language is not shown after pressing SUBTITLE several
times, the disc may not have that language. However, some discs
allow you to change subtitle languages setting in the disc menu.
(Operation varies depending on the disc, so refer to the manual
included in the disc.)
Some DVD discs may contain scenes which have been
shot simultaneously from various angles. You can change
the camera angle if “ ” appears on the screen. If the
ANGLE ICON setting is “OFF” in the OTHERS menu,
• When “NOT AVAILABLE” appears on the TV screen, it means no
subtitle is recorded on the scene.
“
” will not appear. (Refer to pages 16, 19.)
• If you choose a language that has 3-letter-language code, the
code will be displayed every time you change the subtitle lan-
guage setting. If you choose any other languages, “---” will be
displayed instead. (Refer to page 19.)
1.
1 / 8
Audio Language
Black Level Setting
This unit allows you to select an audio language (if multiple languag-
es are available) during DVD playback.
Adjust the Black Level Setting to make the dark areas of the TV picture
brighter.
1.
1.
ON
1.ENG
3/2.1ch 48k/3
Audio can be
Press MODE repeatedly until “
” appears.
varied on the
Each time you press AUDIO,
audio language changes as example below.
displayed number.
2.
3.
or
OFF
or
Current audio
language.
ENG
(English audio)
ON : Makes the dark areas brighter.
OFF : Shows the original picture as recorded.
(Spanish audio)
SPA
(French audio)
FRE
–
–
EN
Download from Www.Somanuals.c1om5. All Manuals Search And Download.
Stereo Sound Mode
Virtual Surround
You can enjoy stereophonic virtual world on your existing 2 channel
stereo system.
This unit allows you to select a sound mode during CD playback.
1.
STEREO
1.
OFF
Each time you press AUDIO, sound mode changes as example below.
Press MODE repeatedly until “ ” appears.
or
2.
1
STEREO
L-ch
(Right and left channels are active.)
(Left channel is active.)
or
1
2
: Natural effect.
: Emphasized effect.
OFF : No effects (original sound).
(Right channel is active.)
R-ch
3.
Hint
• Virtual Surround cannot be changed when the sound mode is set
to either L-ch or R-ch.
Hint
• Stereo Sound Mode is not available on DTS CD.
• The setting will be kept even if the unit is turned off.
• On Audio CDs, Virtual Surround will not be effective if the sound
mode is set to something other than “STEREO”. Refer to “Stereo
Sound Mode”.
• Turn down the level or select “OFF” if the sound is distorted.
• This function cannot be used during Rapid Play.
DVD SETUP
QUICK SETUP Menu
You can select the “PLAYER MENU”, “TV ASPECT”, “PROGRESSIVE”, “DOLBY DIGITAL” or “DTS” from the QUICK SETUP menu quickly.
Select the desired item.
or
p.17 LANGUAGE Setting (Step 1)
QUICK SETUP
<SETUP MENU>
p.17 DISPLAY Setting
p.17 DISPLAY Setting
p.18 AUDIO Setting
p.18 AUDIO Setting
(Step 1)
(Step 1)
(Step 1)
(Step 1)
Confirm that “ (QUICK)” is highlighted.
PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL
DTS
ENGLISH
4:3 LETTER BOX
OFF
BITSTREAM
OFF
QUICK SETUP
PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL
DTS
ENGLISH
4:3 LETTER BOX
OFF
BITSTREAM
OFF
ENTER
• Refer to the sections “PLAYER MENU”, “TV ASPECT” or “PROGRESSIVE” on page 17 and “DOLBY DIGITAL” or “DTS” on page 18.
CUSTOM Menu
You can change the settings of the unit.
QUICK
•
on pages 17, 18 indicates DVD Setup menus also accessible from the QUICK SETUP menu.
or
or
Select
“
(CUSTOM)”.
To decide.
<SETUP MENU>
To select the desired item.
QUICK SETUP
QUICK SETUP
LANGUAGE
PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL
DTS
ENGLISH
4:3 LETTER BOX
OFF
BITSTREAM
OFF
PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL
DTS
ENGLISH
4:3 LETTER BOX
OFF
BITSTREAM
OFF
AUDIO
ORIGINAL
OFF
SUBTITLE
DISC MENU
PLAYER MENU
ENGLISH
ENGLISH
ENTER
ENTER
ENTER
LANGUAGE menu
DISPLAY menu
AUDIO menu
PARENTAL menu
OTHERS menu
OTHERS
AUDIO
DISPLAY
PARENTAL
LANGUAGE
ANGLE ICON
AUTO POWER OFF ON
ON
DRC
ON
TV ASPECT
STILL MODE
PROGRESSIVE
4:3 LETTER BOX
AUTO
OFF
AUDIO
ORIGINAL
OFF
ENGLISH
ENGLISH
DOWN SAMPLING ON
PARENTAL LEVEL ALL
SUBTITLE
DISC MENU
PLAYER MENU
DOLBY DIGITAL
DTS
BITSTREAM
OFF
ENTER
ENTER
ENTER
ENTER
ENTER
LANGUAGE Setting (p.17)
DISPLAY Setting (p.17)
AUDIO Setting (p.18)
PARENTAL Setting (p.18)
OTHERS Setting (p.19)
–
–
EN
16
Download from Www.Somanuals.com. All Manuals Search And Download.
LANGUAGE Setting
Follow the steps in the “CUSTOM Menu” on page 16.
DISPLAY Setting
You can change the display functions. Follow the steps in the
“CUSTOM Menu” on page 16.
Select the desired item.
1.
Select the desired item.
1.
LANGUAGE
or
AUDIO
ORIGINAL
OFF
ENGLISH
ENGLISH
DISPLAY
SUBTITLE
DISC MENU
PLAYER MENU
or
TV ASPECT
STILL MODE
PROGRESSIVE
4:3 LETTER BOX
AUTO
OFF
ENTER
ENTER
LANGUAGE menu
DISPLAY menu
AUDIO
AUDIO: ✽1 ✽2
(Default: ORIGINAL)
Sets the audio language.
ORIGINAL
ENGLISH
FRENCH
QUICK
TV ASPECT:
Select the
desired
setting.
(Default: 4:3 LETTER BOX)
See hint below.
SUBTITLE
OFF
ENGLISH
FRENCH
SUBTITLE: ✽1 ✽2
(Default: OFF)
Sets the subtitle language.
TV ASPECT
STILL MODE
PROGRESSIVE OFF
4:3 LETTERBOX
AUTO
TV ASPECT
or
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
DISC MENU
ENGLISH
FRENCH
DISC MENU: ✽1
(Default: ENGLISH)
Sets the language in DVD
menu.
PLAYER MENU:
(Default: ENGLISH)
Sets the language for the
On-Screen Display.
STILL MODE:
Select the
desired
setting.
(Default: AUTO)
See hint below.
SPANISH
TV ASPECT
STILL MODE
4:3 LETTERBOX
AUTO
STILL MODE
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
QUICK
AUTO
FIELD
FRAME
PROGRESSIVE OFF
or
QUICK
PROGRESSIVE:
(Default: OFF)
See hint below.
Select the desired language.
2.
3.
TV ASPECT
STILL MODE
4:3 LETTERBOX
AUTO
4:3 LETTERBOX
AUTO
PROGRESSIVE OFF
ON
or
To exit the menu.
Select
YES.
"EFORE PROCEEDINGx
ꢀꢁ -AKE SURE YOUR 46 HAS PROGRESSIVE SCANꢁ
ꢂꢁ #ONNECT WITH COMPONENT VIDEO CABLE
./4%ꢃ )F THERE IS NO PICTURE OR PICTURE IS DISTORTED
AFTER SELECTING h9%3vꢄ
7AIT ABOUT ꢀꢅ SECONDS FOR AUTO RECOVERYꢁ
or
!CTIVATE 0ROGRESSIVEꢆ
./
9%3
3%,%#4ꢃ
,
ꢇ
-
3%4ꢃ/+
Hint
✽1
Select
YES.
• Language options are not available with some discs.
#ONFIRM AGAIN TO USE PROGRESSIVE SCANꢀ
)F 0ICTURE IS GOODꢁ 3ELECT h9%3v
• If “OTHER” is selected in the AUDIO, SUBTITLE or DISC MENU
screen, press four-digit number to enter the code for the desired
language. (Refer to “LANGUAGE LIST” on page 19.)
or
./
9%3
3%,%#4ꢂ
,
ꢃ
-
3%4ꢂ%.4%2
• Only the languages supported by the disc can be selected.
✽2
• Language Setting for Audio and Subtitle are not available with
To confirm the PROGRESSIVE.
• The PROGRESSIVE indicator
on the front panel lights on.
To exit the TV ASPECT or
STILL MODE screen.
2.
some discs. Then use AUDIO and SUBTITLE. Details are on page
15.
Hint
TV ASPECT:
• Select “4:3 LETTER BOX”, so that black bars may appear on the top
and bottom of the screen.
•
•
Select “4:3 PAN & SCAN” for a full height picture with both sides adjusted.
Select “16:9 WIDE” if a wide-screen TV is connected to this unit.
STILL MODE:
• Select “AUTO” usually.
• If you select “FIELD”, the picture in the still mode will be stabilized.
•
If you select “FRAME”, the picture in the still mode will be highly defined.
PROGRESSIVE:
• You can set “PROGRESSIVE” to “OFF” either in the DISPLAY menu or
by pressing and holding PLAY B on the front of the unit for more
than 5 seconds, so that the PROGRESSIVE indicator on the front
panel lights off.
• When “PROGRESSIVE” is “ON”, video signals from the unit’s VIDEO
OUT and S-VIDEO OUT jacks will be distorted or not be output at
all.
–
–
EN
Download from Www.Somanuals.c1om7. All Manuals Search And Download.
AUDIO Setting
Choose the appropriate audio settings for your equipments. It only
affects during the playback of DVD discs. Follow the steps in the
“CUSTOM Menu” on page 16.
Enter your desired four-digit password (except for 4737).
1.
PARENTAL menu
PARENTAL
PASSWORD
Please enter
a
4-digit password.
Select the desired item.
1.
ENTER
or
AUDIO
DRC
PASSWORD
Please enter a 4-digit password.
ON
DOWN SAMPLING ON
DOLBY DIGITAL
DTS
BITSTREAM
OFF
ENTER
Don’t forget the password.
Press ‘ENTER’ to activate password.
AUDIO menu
DRC (Dynamic Range Control): (Default: ON)
Set to “ON” to compress the range between soft and loud
sounds.
If you have set a password already,
enter the current four-digit password.
PARENTAL
Enter current password.
ENTER
DRC
ON
OFF
DOWN SAMPLING ON
ON
BITSTREAM
OFF
Select “PARENTAL LEVEL”.
2.
3.
4.
DOLBY DIGITAL
DTS
BITSTREAM
OFF
PARENTAL LEVEL
PASSWORD CHANGE
ALL
or
DOWN SAMPLING: (Default: ON)
Set to “ON” when outputting in 48 kHz.
Set to “OFF” when outputting the original sound.
Select the desired level.
PARENTAL LEVEL
ALL
8
7
6
or
DRC
ON
ON
OFF
BITSTREAM
OFF
DOWN SAMPLING ON
DOLBY DIGITAL
DTS
BITSTREAM
OFF
To exit the menu.
QUICK
DOLBY DIGITAL:
(Default: BITSTREAM)
Set to “BITSTREAM” when the unit is connected to a Dolby
Digital receiver.
• BITSTREAM: Outputs a Dolby Digital Signals.
• DPCM: Convert the Dolby Digital into DPCM (2 channel).
CONTROL LEVELS
• ALL:
All parental locks are cancelled.
• Level 8:
DRC
ON
ON
ON
DPCM
OFF
DOWN SAMPLING ON
DOLBY DIGITAL
DTS
DVD softwares of any grades (adult/general/children) can be played back.
BITSTREAM
OFF
• Levels 7 to 2:
Only DVD softwares intended for general use and children can be
played back.
• Level 1:
QUICK
DTS:
(Default: OFF)
Only DVD softwares intended for children can be played back, with
those intended for adult and general use prohibited.
Set to “BITSTREAM” when the unit is connected to DTS
decoder.
Hint
DRC
ON
ON
ON
DOWN SAMPLING ON
• DVD-Video discs may not respond to the parental lock settings.
Make sure this function works with your DVD-Video discs.
DOLBY DIGITAL
DTS
BITSTREAM
OFF
BITSTREAM
BITSTREAM
To Change the Password for Parental Controls
You can change your password for parental controls. Follow the steps
in the “CUSTOM Menu” on page 16.
To exit the menu.
2.
Enter your four-digit password.
1.
PARENTAL menu
PARENTAL
Enter current password.
Hint
DRC:
ENTER
• This function is available only to the discs which are recorded in
the Dolby Digital format.
Select “PASSWORD CHANGE”.
2.
3.
PARENTAL LEVEL
PASSWORD CHANGE
ALL
DOWN SAMPLING:
or
• When playing back a 96 kHz disc with the copyright protection
or when Virtual Surround is set to 1 or 2, the sound will be down
sampled at 48 kHz and output as digital audio even if the “DOWN
SAMPLING” is set to “OFF”.
Enter your new four-digit password (except for 4737).
PASSWORD
Please enter a 4-digit password.
• This function is available only on digital outputting of a disc
recorded in 96 kHz.
PARENTAL Setting
Parental Control limits the disc viewing that exceed your settings. (An
incorrect password will not play.)
To exit the menu.
4.
This feature prevents your children from viewing inappropriate mate-
rials.
Hint
• Record the password in case you forget it.
Parental Levels
• If you forget the password, press 4, 7, 3, 7 at step 1, then enter
your new password.
Parental Level allows you to set the rating levels of your DVD discs.
Playback will stop if the ratings exceed the levels you set. Follow the
steps in the “CUSTOM Menu” on page 16.
• Password will be cleared and parental levels will be set to “ALL”.
–
–
EN
18
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHERS Setting
You can change the other functions. Follow the steps in the “CUSTOM
Menu” on page 16.
Reset to the Default Setting
(except for PARENTAL Setting)
Select the desired item.
1.
SETUP menu
1.
Select the desired item.
OTHERS menu
QUICK SETUP
PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL
DTS
ENGLISH
4:3 LETTER BOX
OFF
BITSTREAM
OFF
OTHERS
or
ANGLE ICON
AUTO POWER OFF ON
ON
ENTER
ENTER
Select “ (INITIALIZE)”.
2.
3.
4.
QUICK SETUP
ANGLE ICON: (Default: ON)
Set to “ON” to show the angle icon when multiple
camera angles are available during DVD playback.
or
PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL
DTS
ENGLISH
4:3 LETTER BOX
OFF
BITSTREAM
OFF
ENTER
OFF
ON
ANGLE ICON
AUTO POWER OFF
ON
ON
Select “YES”.
INITIALIZE
or
Initialize?
NO
YES
AUTO POWER OFF: (Default: ON)
Set to “ON” to turn this unit off automatically after
ENTER
Press twice.
30 minutes of no use.
ON
ANGLE ICON
ON
ON
To exit the menu.
OFF
AUTO POWER OFF
2.
To exit the menu.
Hint
• When you cancel to initialize at step 3, select “NO”.
INFORMATION
LANGUAGE LIST
Language
Code
Language
French [FRE]
Code
Language
Code
Language
Code
6565
A-B
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
5264 Macedonian
5271 Malagasy
5358 Malay
5957 Siswat
4748 Frisian
5953 Slovak
6557
6558
6561
5165
6567
6569
6568
4747 Galician
4752 Georgian
6563 German [GER]
4759 Greek [GRE]
4764 Greenlandic
5471 Guarani
4765 Gujarati
4771 Hausa
5965 Slovenian
5958 Somali
5747 Malayalam
5051 Maltese
5966 Spanish [SPA]
5955 Sundanese
5964 Swahili
5158 Maori
5758 Marathi
Armenian
Assamese
Aymara
5360 Moldavian
5367 Mongolian
5447 Nauru
5961 Swedish [SWE]
5960
6047 Tagalog
6051 Tajik
6061 Tamil
Tatar
T
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
Azerbaijani
Bashkir
4772 Hebrew
4847 Hindi
5167 Hungarian [HUN]
4860 I-K
5072 Icelandic [ICE]
4854 Indonesian
4855 Interlingua
4864 Interlingue
4853 Inupiak
5971 Irish [IRI]
4851 Italian [ITA]
Japanese [JPN]
5759 Javanese
4947 Kannada
7254 Kashmiri
4961 Kazakh
5464 Kinyarwanda
4965 Kirghiz
5047 Kirundi
5569 Nepali
5455 Norwegian [NOR]
5467 O-R
Basque
Bengali;Bangla
Bhutani
Occitan
6149 Telugu
6164 Thai
6159 Tibetan
6247 Tigrinya
6265 Tonga
5247 Tsonga
6258 Turkish [TUR]
6266 Turkmen
6367 Twi
5565 Oriya
Bihari
5560 Oromo(Afan)
5547 Panjabi
Bislama
Breton
5551 Pashto;Pushto
5557 Persian
Bulgarian
Burmese
Byelorussian
C-E
5347 Polish
5566 Portuguese [POR]
5647 Quechua
5669 Rhaeto-Romance
5760 Romanian [RUM]
5765 Russian [RUS]
Cambodian
Catalan
Chinese [CHI]
Corsican
Croatian
Czech
6459 U-Z
6461 Ukrainian
6467 Urdu
Uzbek
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
5757
S
6469 Samoan
5771 Sangho
6460 Sanskrit
5761 Scots Gaelic
5767 Serbian
Serbo-Croatian
5861 Sesotho
5847 Setswana
5868 Shona
6559 Vietnamese
6553 Volapuk
6547 Welsh
5350 Wolof
6564 Xhosa
6554 Yiddish
6566 Yoruba
6660 Zulu
6560
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
F-H
6058 Korean [KOR]
5160 Kurdish
5161 L-N
5166 Laothian
Latin
Faroese
5261 Latvian;Lettish
5256 Lingala
Fiji
5860 Sindhi
5866 Singhalese
6550
6555
Finnish [FIN]
5255 Lithuanian
If you choose a language that has a 3 letter language code, the code will be displayed every time you change the Audio or Subtitle Language
setting on page 15. If you choose any other languages, “---” will be displayed instead. (3 letter language code is written in bracket.)
–
–
EN
Download from Www.Somanuals.c1om9. All Manuals Search And Download.
SPECIFICATIONS
PRODUCT TYPE
CONNECTIONS
DVD Video Player
Video output
One RCA connector, 1 Vpp (75 Ω)
DISCS PLAYBACK COMPATIBILITY
DVD-Video / DVD-RW/-R / DVD+RW/+R / Audio CD / CD-RW/-R
FREQUENCY RESPONSE
Component video output
One pin jack (Y), 1 Vpp (75 Ω)
Two pin jacks (CR/PR, CB/PB),
700 mVpp (75 Ω)
Mini DIN 4-pin jack (75 Ω)
Two RCA connectors
(one left channel, one right channel)
2 Vrms (47 kΩ)
One pin jack, 500 mVpp (75 Ω)
S-video output
Analog audio output
DVD (linear sound) :
20 Hz to 22 kHz (sample rate: 48 kHz)
20 Hz to 44 kHz (sample rate: 96 kHz)
20 Hz to 20 kHz
CD :
SIGNALTONOISE RATIO S/N RATIO
Coaxial digital audio output
POWER SOURCE
CD :
120 dB (JEITA)
DYNAMIC RANGE
120 V ~ +/- 10%, 60 Hz +/- 0.5%
POWER CONSUMPTION
10 W (standby: 0.8 W)
OPERATING TEMPERATURE
DVD (linear sound) :
CD :
TOTAL DISTORTION FACTOR
102 dB
99 dB (JEITA)
DVD :
CD :
1 KHz
1 KHz
0.0045% (JEITA)
0.0035% (JEITA)
41 F° to 104 F° (5 °C to 40 °C)
DIMENSIONS
W: 2.5 inch (62 mm) H: 9.8 inch (248.5 mm) D: 9.4 inch (238 mm)
WEIGHT
WOW AND FLUTTER
Below the measurement limitation (+/-0.001% W PEAK) (JEITA)
Approx 2.9 lbs. (1.3 kg)
• Designs and specifications are subject to change without notice.
TROUBLESHOOTING GUIDE
If this unit does not perform properly when operated as instructed in this Operation Manual, check this unit consulting the following checklist.
PROBLEM
CORRECTIVE ACTION
No power.
• Make sure the power plug is connected to an AC outlet.
• Make sure the power is turned on.
The unit turns off suddenly.
• Check if the “AUTO POWER OFF” is set to “OFF”.
This unit does not respond to the remote • Check if the power plug is connected to an AC outlet.
control.
• Check the batteries in the remote control.
• Aim the remote control directly at the remote sensor. If necessary, remove all the obstacles
between the sensor and the remote.
• You have to be within 23 feet (7 m) of this unit.
No picture.
• Connect the video cable firmly.
• Insert a correct video disc that plays on this unit.
Disc cannot be played.
• Insert the disc.
• Clean the disc.
• Insert the disc correctly with the label facing to the left when the unit is installed vertically.
• Insert the disc correctly with the label facing up when the unit is installed horizontally.
• Cancel the parental lock or change the control levels.
•
Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its surface.
• If the recorded portion of the disc is too small (less than 2 3/16 inches (55 mm)), it may not play
back properly.
No sound.
• Connect the audio cable firmly.
• Turn the power of the audio component on.
• Correct the audio output settings.
• Correct the input settings on the audio component.
No DTS audio is output.
Distorted picture.
• Use a DIGITAL AUDIO OUT jack when outputting the DTS audio.
• Connect this unit directly to the TV.
•
There are some cases where picture may be slightly distorted, and those are not a sign of a malfunction.
• During the playback of a 2-layered disc, pictures may stop for a moment. This happens while the
1st layer is being switched to the 2nd layer. This is not a malfunction.
• Check if the INTERLACE/PROGRESSIVE mode is set correctly according to your TV. See page 8.
• This happens right after fast forwarding or rewinding. This is not a malfunction.
Audio or subtitle language does not
match the set up.
• The selected language is not available for audio or subtitles on the DVD.
This is not a malfunction.
The camera angle cannot be changed.
• The DVD does not contain sequences recorded from different camera angles.
This is not a malfunction.
Audio or subtitle language cannot be
changed.
• The DVD does not contain audio source or subtitles in the selected language.
This is not a malfunction.
“Prohibited icon” appears on the screen,
prohibiting an operation.
• That operation is prohibited by this unit or the disc. This is not a malfunction.
•
Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Operation Manual for details on correct operations.
• Playback from a desired track and random playback are not available during programmed playback.
• Some functions are prohibited on some discs.
SERVICE INFORMATION (FOR THE U.S.)
For the location of the nearest SHARP Authorized Service Center, or to obtain product literature, accessories, supplies or customer assistance,
–
–
EN
20
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
Para uso del cliente:
Nº de modelo:
Nº de serie:
________DV-MX1U________
________________________
Para futura referencia, anote los números de modelo y de
serie (indicados en la parte posterior esta unidad) en el espa-
cio provisto.
AVISO:
PARA REDUCIR EL RIESGO DE INCENDIO O ELECTROCHOQUE NO
EXPONGA ESTE APARATO A LA HUMEDAD.
PRECAUCIÓN:PARA EVITAR DESCARGAS ELÉCTRICAS, HAGA QUE LA PALETA ANCHA
DEL ENCHUFE COINCIDA CON LA RANURA ANCHA E INTRODÚZCALA
HASTA EL FONDO.
PRECAUCION
Este símbolo previene al usuario del voltaje
aislado dentro de la unidad que puede pro-
vocar descargas eléctricas peligrosas.
PELIGRO DE DESCARGA ELECTRICA NO
ABRIR DECLARACIÓN DE CONFORMIDAD
PRECAUCION:
Este símbolo advierte al usuario que existen
instrucciones de operación y de manten-
imiento en la literatura incluida en esta
unidad.
TPARA REDUCIR EL RIESGO DE DESCARGA ELECTRICA, NO
QUITE LA CUBIERTA. EL USUARIO NO DEBERA DAR NINGUN
TIPO DE SERVICIO A NINGUNA PARTE INTERNA. DEBERA SER
REALIZADO SOLO POR PERSONAL DE SERVICIO CALIFICADO
.
“ADVERTENCIA—Las reglas de la FCC (Comisión Federal de Comunicaciones) estipulan
que cualquier modificación o cambio a este equipo no aprobado expresamente por el
fabricante podrá anular la autorización del usuario para operar este equipo”.
Este dispositivo cumple con la Parte 15 de las reglas de la FCC (Comisión Federal de Comunicaciones). La operación se encuen-
tra sujeta a las dos condiciones siguientes:
(1) Este dispositivo no debería producir interferencias perjudiciales, y
(2) este dispositivo debe aceptar cualquier interferencia recibida, incluyendo las que puedan producir una operación indeseable.
INFORMACION
Este equipo se ha sometido a todo tipo de pruebas y cumple con las normas establecidas para dispositivo digital de Clase B, de
conformidad con la Parte 15 de las reglas de la FCC (Comisión Federal de Comunicaciones). Estas reglas están diseñadas para
asegurar una protección razonable contra interferencias perjudiciales en las instalaciones residenciales. Este equipo genera,
utiliza y puede emitir energía de radiofrecuencia y, si no se instala y utiliza debidamente, es decir, conforme a las instrucciones,
podrían producirse interferencias perjudiciales en las radiocomunicaciones. Sin embargo, no se garantiza que estas interfer-
encias no se produzcan en una instalación determinada. Si este equipo ocasiona interferencias en la recepción de radio o
televisión, lo cual puede comprobarse con sólo apagar y encender el equipo, intente corregir el problema mediante una o una
combinación de las siguientes medidas:
—Reoriente la antena receptora o cámbiela de lugar.
—Aumente la separación entre el equipo y el receptor.
—Enchufe el equipo a una toma de corriente situada en un circuito distinto del receptor.
—Consulte a su distribuidor o a un técnico experto en radio/televisión.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Este aparato digital de la Clase B cumple con la norma ICES-003 de Canadá.
PRECAUCION:
ESTA UNIDAD HA SIDO CLASIFICADA COMO PRODUCTO CLASS 1 LASER.
EL USO DE MANDOS O AJUSTES O LA REALIZACION DE PROCEDIMIENTOS DISTINTOS DE LOS INDICADOS EN LA PRESENTE
IMPLICA EL RIESGO DE EXPOSICION A UNA RADIACION PELIGROSA.
COMO LOS RAYOS LASER UTILIZADOS EN ESTA UNIDAD PUEDEN RESULTAR PERJUDICIALES PARA SUS OJOS, NO INTENTE
DESARMAR EL GABINETE. SOLICITE EL SERVICIO UNICAMENTE A PERSONAL CUALIFICADO.
Los productos que han ganado la marca ENERGY STAR® han sido diseñados para proteger el medio ambiente mediante una eficiencia supe-
rior en el uso de la energía.
–
–
SP
Download from Www.Somanuals.c2om1. All Manuals Search And Download.
IMPORTANTES MEDIDAS DE SEGURIDAD Y PRECAUCIONES
1) Lea las instrucciones - Lea detenidamente todas las instruc-
ciones de seguridad y operación antes de usar el producto.
14) Tormentas eléctricas - Como medida adicional de protec-
ción durante tormentas eléctricas, o cuando el producto per-
manezca sin uso durante períodos prolongados de tiempo,
desconéctelo del tomoacorriente mural y desconecte la ante-
na o sistema de cable. Esto evitará que el grabador de video-
cassettes resulte dañado por tormentas eléctricas o sobreten-
siones en la línea de alimentación.
2) Conserve las instrucciones - Conserve las instrucciones de
seguridad y operación para consultas futuras.
3) Respete las advertencias - Observe estrictamente todas las
advertencias impresas en el producto y las incluidas en el
manual de instrucciones.
15) Líneas de alimentación - Un antena exterior no debe ser
instalada en la cercanía de líneas de alimentación aéreas ni
de otros circuitos de potencial para iluminación eléctrica, o
donde pueda caerse y hacer contacto con tales líneas o circu-
itos. Al instalar un sistema de antena exterior, enta mucho cui-
dado de no tocar tales líneas o circuitos de alimentación, ya
que el contacto con ellos podría será fatal.
4) Siga las instrucciones - Siga todas las instrucciones de oper-
ación.
5) Limpieza - Desconecte el producto del tomacorriente mural
antes de limpiarlo. No use limpiadores líquidos ni aerosol. Use
un paño húmedo para la limpieza del producto.
6) Enchufes - No use enchfes no recomendados por el fabrican-
te del producto, ya que podría ser peligroso.
16) Sobrecarga - No sobrecargue los tomacorrientes murales ni
los cables de extensión, ya que esto podría causar incendios o
descargas eléctricas.
7) Agua y humedad - No use este producto cerca del agua, por
ejemplo, cerca de una bañera o lavamanos, cerca del fregade-
ro de la cocina o lavandería, en un piso mojado, cerca de una
piscina, etc.
17) Entrada de objetos y líquidos - Nunca introduzca objetos de
ningún tipo por las aberturas de sete producto, ya que por-
dría tocar peligrosos puntos de alta tensión o cortocircuitar
partes, provocando incendios o descargas elécticas. Nunca
derrame ningún tipo de líquido sobre el producto.
ADVERTENCIA SOBRE EL USO
DE CARROS PORTÁTILES
8) Accesorios - No instale este pro-
ducto en un carro, soporte, trí-
pode o mesa inestables. El graba-
dor de videocassettes podría
caerse, causando serias lesiones a
un niño o adulto, resultando tam-
bién severamente dañado. Uselo
18) Servicio - No intente reparar el producto usted mismo; al abrir
o desmontar las cobiertas usted se expondrá a alta tensión y
a otros peligros. Solicite todo servicio a personal calificado.
19) Daños que requieran reparación - En los siguientes casos,
desconecte el producto del tomacorriente mural y llame a un
técnico de servicio calificado:
sólo el un carro, soporte, trípode
o mesa recomendados por el fab-
S3125A
ricante, o vendidos con el producto. Toda instalación del pro-
ducto deberán hacerse de acuerdo a las instrucciones del fab-
ricante, empleando los accesorios de instalación recomenda-
dos por el mismo.
a) Cuando el cable de alimentación o la clavija estén dañados,
b) Si se ha derramado líquido sobre la unidad, o si algún obje-
to ha caído dentro del producto,
9) La combinación de producto y carro debe ser movida con
cuidado. Las detenciones bruscas, la fuerza excesiva y las
superficies disparejas podrán hacer que el producto y el carro
se vuelquen.
c) Si el producto ha sido expuesto a la lluvia o al agua,
d) Cuando a pesar de haber sebuido las instrucciones de
operación, el producto no funcione normalmente. Ajuste
solamente los controles mencionados en el manual de
instrucciones; el ajuste incorrecto de otros controles podrá
causar daños a la unidad, la que por lo general requerirá de
un prolongado trabajo de reparación (por un técnico cali-
ficado) para que sus condiciones normales de operación
puedan ser restablecidas,
10) Ventilación - El gabinete del producto tiene renuras y aber-
turas de ventilación que garantizan el funcionamiento confi-
able del producto, evitando que se recaliente. Estas aberturas
no deberán ser bloquear las aberturas, nunca setúe el graba-
dor de videocassettes encima de una cama, sofá, alfombra u
otra superficie similar. El grabador de videocassettes no debe
ser instalado en un mueble emportado, como una repisa para
libros o bastidor, a menos que se pueda garantizar una venti-
lación adecuada, o cuando las instrucciones del fabricante así
lo especifiquen.
e) Si el producto se ha caído o si el gabinete se ha dañado.
f) Cuando el producto muestre un cambio notorio en su ren-
dimiento.
20) Piezas de requesto - Cuando sea necesario reemplazar piezas,
asegúrese de que el técnico de servicio emplee las piezas de
requesto especificadas por el fabricante, o piezas que tengan
las mismas características que las piezas originales. Las susti-
tuciones no autorizadas podrán causar incendios, descargas
eléctricas y otoros problemas.
11) Alimentación - Este grabador de videocassettes sólo debe ser
operado mediante el tipo de fuente de alimentación especifi-
cado en la etiqueta indicadora. Si no seta seturo del tipo de
fuente de alimentación que tiene en su casa, consulte a su
distribuidor o a la compañía de electricidad local En el caso
de grabador de doseñados para funcionar a pilas o con otras
fuentes de alimentación, consulte el manuel de instrucciones
respectivo.
21) Revisión de seguridad - Al finalizar cualquier servicio de man-
tenimiento o reparación de este producto, solicítele al técnico
que efectúe comprobaciones de seguridad para determinar
si el producto se encuentra o no en condiciones óptimas de
operación.
12) Conexión a tierra o polarización - Este producto está equipa-
do con una clavija polarizada de corriente alterna (una clavija
que tiene una espiga más ancha que la otra). Esta clavija sola-
mente pordá ser insertada en el tomacorriente en una sola
dirección. Esta es una medida de seguridad. Si no puediera
insertar completamente la clavija en el tomacorriente, vuel-
va a intentarlo invirtiendo la clavija. Si aún no fuera posible
insertar la clavija, tome contacto con un electricista para que
repare su tomacorriente obsoleto . No modifique las caracter-
ísticas de seguridad de la clavija polarizada.
22) Calor - Este producto debe colocarse fuera del alcance de
fuentes de calor tales como radiadores, rejillas de calefacción,
estufas o cualquier otro producto destinado a producir calor,
incluyendo los amplificadores.
13) Protección del cable de alimentación - Los cables de aliment-
ación deberán ser tendidos de manera tal que la probabilidad
de que sean pisados o aplastados por otros objetos sea mín-
ima. Preste especial atención a las clavijas de los cables, a los
receptáculos, y al punto por donde salen del producto.
–
–
SP
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Conexiones
Reproducción
Antes:
Encienda el televisor, amplificador y
otros equipos conectados a esta uni-
dad. Asegúrese que el televisor y el
sintonizador de audio (de venta en los
comercios) están en el canal correcto.
Si su televisor tlene entradas de AUDIO/
VIDEO vea la sección “Connection to a TV”
en la página 8 en el Manual de Manejo, En
caso contrario, vea la sección “RF Modulator
Connection” en la página 8 en el Manual de
Manejo.
Ponga un disco con la
etiquetahacia izquierda.
1.
3.
2.
4.
LABEL-SIDE
SEARCH
MODE
POWER
DISPLAY
EJECT
1
AUDIO
1
4
2
5
8
0
3
6
SUB
TITLE
ANGLE
REPEAT
A-B
Instalación de las pilas en el mando a
distancia
7
9
CLEAR
Para empezar la
reproducción.
Para parar la repro-
ducción.
+10
PAUSE
SKIP
PLAY
3
REV
FWD
STOP
4
SETUP
TOP MENU
MENU
Mando a distancia
Tipo de disco
(BOordetnóanlfabético)
ꢀ
ꢃ
ꢆ
ꢁ
ꢄ
ꢇ
ꢉ
ꢂ
ꢅ
• Para seleccionar directamente el capí- • Para seleccionar directamente la
Para cambiar el idioma en la pantalla
ꢈ
tulo o título.
canción.
ꢊꢀꢉ
1.
• Para mover el cursor y determinar la
posición.
• Para mover el cursor y determinar la
posición.
%.4%2
QUICK SETUP
• Para repetir entre su punto A y B selec- • Para repetir entre su punto A y B selec-
PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL
DTS
ENGLISH
4:3 LETTER BOX
OFF
BITSTREAM
OFF
cionado.
cionado. (CD)
• Para cambiar el ángulo de la cámara
de modo de ver la misma secuencia
reproducida desde un ángulo dife-
rente. (DVD-Video)
ENTER
—
•
Para seleccionar un idioma para el audio • Para seleccionar un modo de sonido
o un modo de sonido deseados. deseado. (CD)
Confirme que ha seleccionado “ (QUICK)”.
• Para borrar los marcadores. (CD)
• Para eliminar el Nº de estado en la
entrada de programa.
2.
3.
• Para borrar los marcadores.
•
Para borrar los números mal entrados.
•
Para borrar los números mal entrados.
• Para borrar el punto para la repetición
A-B.
• Para borrar el punto para la repetición
A-B. (CD)
• Para mostrar el modo de disco actual.
• Para expulsar el disco.
• Para mostrar el modo de disco actual.
• Para expulsar el disco.
Confirme que ha seleccionado
“PLAYER MENU”.
QUICK SETUP
PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL
DTS
ENGLISH
4:3 LETTER BOX
OFF
BITSTREAM
OFF
• Para buscar en avance/retroceso por
un disco.
• Para empezar la reproducción en
avance lento/retroceso durante el
modo de pausa.
• Para buscar en avance/retroceso por
un disco.
2%6
&7$
Seleccione el idioma deseado para las
indicaciones en la pantalla.
4.
• Para llamar el Menú en un disco.
• Para llamar la lista de archivo. (MP3)
• Para desactivar/x1.3/x0.8 el reproduc-
ción rápído.
•
•
Para disponer el orden de reproducción
o la reproducción aleatoria.
Para activar/desactivar el ambiental virtual.
•
•
Para activar/desactivar el nivel del negro.
Para activar/desactivar el ambiental virtual.
o
PLAYER MENU
ENGLISH
FRANÇAIS
•
Para hacer una pausa en la reproducción.
• Para hacer una pausa en la reproduc-
ción del disco.
• Para avanzar la reproducción un
cuadro cada vez.
ESPAÑOL
• Para empezar la reproducción del
disco.
• Para empezar la reproducción del
disco.
0,!9
• Para activar o desactivar la unidad.
• Para activar o desactivar la unidad.
• Para reproducir repetidamente una
Para salir del menú.
5.
• Para reproducir repetidamente un capí- cancióno disco. (CD)
tulo o título.
• Para reproducir repetidamente
una canción, grupo o disco. (MP3)
• Para volver a la operación anterior.
• Para volver a la operación anterior.
• Para buscar un capítulo, título u hora.
• Para volver rápidamente a un lugar o
disco.
• Para buscar una canción.
• Para buscar la hora. (CD)
•
Para volver rápidamente a un lugar o disco.
• Buscar los marcadores.
• Buscar los marcadores. (CD)
• Para ingresar al modo de configuración • Para ingresar al modo de configuración
o para cambiar las configuración de los
elementos.
o para cambiar las configuración de los
elementos.
3+)0
• Para saltar capítulos o títulos.
• Para saltar canciones.
34/0
• Para parar la reproducción.
• Para parar la reproducción.
• Para seleccionar subtítulos en un disco.
—
• Para volver al archivo superior de la
jerarquía más alta en el programa y en
la lista de archivo. (MP3)
• Para llamar el menú inicial en un disco.
(DVD-Video)
• Para ampliar una parte de la
imagen(x2/x4).
—
–
–
SP
Download from Www.Somanuals.c2om3. All Manuals Search And Download.
CONSUMER LIMITED WARRANTY
(Valid for warranty service in the U.S. only)
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the
“Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it
will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured
equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below
nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or
other misuse, abnormal service or handling, or which has been altered or modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide
proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL
IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE
LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow
limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those
described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and
exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described
herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the
Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise.
In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused
by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any
way responsible for any incidental or consequential economic or property damage. Some states do not allow the exclusion of
incidental or consequential damages, so the above exclusion may not apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY
FROM STATE TO STATE.
Model Specific Section
Your Product Model Number & Description: DV-MX1U DVD Video Player
(Be sure to have this information available when you need service for
your Product.)
Warranty Period for this Product:
One (1) year parts and ninety (90) days labor from date of purchase.
Non-rechargeable batteries.
Additional Item(s) Excluded from warranty
Coverage (if any):
Where to Obtain Service:
Call Sharp Electronics corporation toll free at 1-800-BE-SHARP for
instructions on how to obtain service on your DVD player.
What to do to Obtain Service:
Ship your product, prepaid, as per the instruction given by the Sharp
representative at the toll free number (1-800-BE-SHARP). BE sure to
have your proof of purchase available. Be sure to ship the product
securely packaged and insured against shipping damage.
CALL 1-800-BE-SHARP.
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
9HS1VMN21486
SHARP CORPORATION
E61U1UD*****
Osaka, Japan
1VMN21486
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|