Hand Vacuum With Motorized Brush
OWNER’S MANUAL
Model V1510
120V., 60Hz., 6.67 Amps
EURO-PRO Operating LLC
Boston, MA, 02465
Tel.: 1 (800) 798-7398
Copyright © EURO-PRO Operating LLC 2008
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONARY MEASURES
OPERATING INSTRUCTIONS
3. To use the flexible hose with the
WARNING: Always unplug from electrical
outlet before opening the dust cup
(container).
Note: HEPA dust cup filter must be used
when operating the hand vacuum.
IMPORTANT:If the suction opening of the hose is BLOCKED, switch off the vacuum
cleaner and remove the blocking substance before you start the unit
again.
dusting brush, hold the hose in one
hand and with the other, pull out the
dusting brush and turn clockwise to
lock in place. (Fig. 4)
4. When pulling out the power plug
from the wall outlet, pull the plug
not the power cord.
1. Do not operate the vacuum
cleaner too close to heaters or
radiators.
Using The Unit As A Hand
Vacuum
1. Insert the dusting brush/hose
connector into the brush chamber
exhaust port. Lock the flexible hose in
place by clipping the hose into the
hose holder. (Fig. 1)
Fig. 4
4. To use the flexible hose with the
crevice tool, make sure that the
brush is in the storage position
and insert the crevice tool into the
opening of the hose. (Fig. 5)
5. Do not pick up anything that is
burning or smoking such as
2. Before inserting the power plug
into the wall outlet, make sure that
your hands are dry.
cigarettes, matches or hot ashes.
6. Do not use without HEPA filter in
place.
Fig. 1
7. Do not bend, trample or pull the
hose by force. Do not operate
with a damaged hose.
Cleaning With the Hose
To use the hand vacuum with only the
hose and the dusting brush or crevice
tool:
1. Rotate the brush cover by pushing on
the brush cover release button until it
clicks in place. (Fig. 2)
2. Remove the flexible hose from the
brush chamber exhaust port and take
the hose out from the hose holder.
(Fig. 3)
8. When vacuuming fine dust
particles such as gyproc dust,
flour or any other fine dust, empty
the dust cup and "TAPCLEAN"
the dust cup filter frequently to
avoid over heating the motor.
3. Before you start vacuuming, make
sure to remove large or sharp
objects that might damage the HEPA
Filter.
Fig. 5
CAUTION: The hand vacuum is a
very powerful unit. Make sure that you
hold it firmly, otherwise it can slip out
of your hand and cause injury.
Fig. 2
Fig. 3
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
2. To open the dust cup (container),
6. Vigorously “TapClean”
Cleaning & Changing the HEPA
Dust Cup Filter
WARNING: Always unplug the unit from
electrical outlet before opening the Dust
Cup (container).
IMPORTANT: Do NOT use the HEPA
filter cartridge without the debris screen
in place.
WARNING: After each Use - Always
remove the filter debris screen from the
HEPA dust cup filter, then vigorously
“TapClean” HEPA filter until no more
dust can be removed.
Motor Thermostat
push button and remove the dust
cup (container ). (fig. 7)
the HEPA dust cup
filter on a hard
surface until no more
dust is observed
falling out from
between the pleats of
the filter. (Fig. 11)
IMPORTANT: This unit is equipped
with a motor protective thermostat. If
for some reason the vacuum cleaner
should overheat, the thermostat will
automatically turn the unit off. Should
this occur:
• Push the On/Off button once.
• Disconnect the plug from the
power source.
• Check the source of overheating
problem. (i.e. clogged hose or
filter)
• If clogged hose or filter is found,
unclog the hose and replace the
filters.
• Wait at least 45 minutes before
attempting to reuse the vacuum.
• After unit has cooled down for
45 minutes, plug in the cleaner
and push the On/Off button. The
vacuum should start again.
• If the vacuum still does not start,
contact customer service at
1 (800) 798-7398.
Dust cup release button
Fig. 11
7. “TapClean” the debris
screen or rinse under
a faucet until clean.
(Fig. 12) Remember
that the debris screen
must be completely
dry before reinstalling
in the vacuum.
Fig.7
3. Rotate the lower dust cup clockwise
to separate it from the filter
chamber. Empty and clean the dust
cup. (Fig. 8)
IMPORTANT, Please Note : The
“TapClean” HEPA dust cup filter & debris
screen will stop most of the tiniest dust
particles and airborne allergens from re-
entering the air you breathe. Because of
this incredible filtration performance, the
HEPA dust cup filter will quickly
accumulate, inside the white filter folds,
many fine dust particles that are difficult
to see but which will eventually block or
reduce your suction power - if not
cleaned properly. Clean the HEPA filter
and debris screen after each use as
described in this section.
Fig. 12
Debris
Screen
8. Replace the debris screen on the
HEPA dust cup filter and reinstall
Fig.8
filter assembly in the vacuum. (Not
shown)
Filter
Chamber
Dust
Cup
PLEASE NOTE: The white pleated
filter material in the HEPA dust cup
filter will discolor over time -This is
NORMAL and will NOT affect the
performance of the filter. If the HEPA
dust cup filter
4. Remove the HEPA filter from the
filter chamber. (Fig. 9)
Filter
1. To remove the dust cup (container),
hold the unit in the upright position to
prevent the dust from falling out of the
dust cup. (Fig. 6)
Fig. A
Chamber
HEPA
Filter
is properly
"TapCleaned”
after each use
and suction
Wash once a
month or when
suction
appears
reduced.
.
does not return
to 100%, then
we suggest that
the HEPA filter
be “TapCleaned”
vigorously until no
Warning: Allow 24
hours for drying before
replacing in unit.
Fig. 9
more dust can be removed, then
rinsed under the faucet and allowed to
dry for 24 hours before refitting into
the vacuum. (Fig. A) This should be
done once a month or when
5. Separate the debris screen from the
HEPA filter cartridge by grasping the
debris screen with one hand and the
filter frame with the other and pull
Fig. 6
apart. (Fig. 10)
Debris
suction appears reduced.
Screen
CAUTION: The suction hole must be
open and free of any obstructions at
all times. Otherwise, the motor will
overheat and could become
damaged.
HEPA
Filter
Fig. 10
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING GUIDE
ORDERING REPLACEMENT DUST CUP FILTERS
FOR REPLACEMENT FILTER INFORMATION
PROBLEM
POSSIBLE REASON
POSSIBLE SOLUTION
for Model V1510
1. Plug unit in firmly.
2. Check fuse or breaker.
Replace fuse/reset breaker.
3. Call 1 (800) 798-7398.
4. Turn the unit off and unplug
from outlet.
Call:
1 (800) 798-7398
1. Power cord not firmly plugged
into outlet.
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
Or visit our website:
HAND VACUUM
WILL NOT
OPERATE
2. No power in wall outlet.
3. Needs servicing.
4. Thermostat has tripped.
Item
Replacement HEPA Filter
Part #
1. Allow unit to cool down,
then Restart. Empty dust
cup – (see page 5).
XF1510
2. Turn unit off and unplug
from wall outlet. Remove
HEPA Dust Cup Filter and
check for object(s) in air
duct and remove.
HAND VACUUM
1. Dust cup is full.
WILL NOT PICK-UP 2. Unit clogged.
OR SUCTION
POWER IS WEAK
3. HEPA Dust Cup Filter needs
cleaning or replacing.
For Technical Support
3. Clean or replace HEPA
Dust Cup Filter.
for Model V1510
(see page 5)
Call:
1 (800) 798-7398
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
1. Empty dust cup.
2. Review HEPA Dust Cup
Filter instructions.
1. Dust cup is full.
DUST ESCAPING
FROM HAND
VACUUM
2. HEPA Dust Cup Filter is not
installed correctly.
(see page 5)
3. There is a puncture/hole in
HEPA Dust Cup Filter.
3. Replace HEPA dust cup
filter. (see page 5)
Please Note:
HAND VACUUM
HOSE OR
BRUSHES WILL
NOT PICK-UP
1. Remove hose and/or
brushes. Remove
obstruction from hose.
2. Empty and clean dust cup.
The HEPA Dust Cup Filter is washable. It should, however, be replaced
every six (6) months to ensure peak performance of your vacuum.
1. Hose clogged.
2. Dust cup is full.
Important:
Make sure that HEPA filter is completely dry before re-installing back in the
hand vacuum.
7
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Model V1510
ONE (1) YEAR LIMITED WARRANTY
EURO-PRO Operating LLC warrants this product to be free from defects in material and
workmanship for a period of one (1) year from the date of the original purchase, when
utilized for normal household use, subject to the following conditions, exclusions and
exceptions.
If your appliance fails to operate properly while in use under normal household conditions
within the warranty period, return the complete appliance and accessories. For Customer
appliance is found to be defective in material or workmanship, EURO-PRO Operating
LLC will repair or replace it free of charge. Proof of purchase date and $ 9.95 to cover the
cost of return shipping and handling must be included. *
Non-durable parts including, without limitation, dust cups, filters and brushes which
normally require replacement are specifically excluded from warranty.
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or
replacement of the unit at our option. This warranty does not cover normal wear of parts
and does not apply to any unit that has been tampered with or used for commercial
purposes. This limited warranty does not cover damage caused by misuse, abuse,
negligent handling or damage due to faulty packaging or mishandling in transit. This
warranty does not cover damage or defects caused by or resulting from damages from
shipping or repairs, service or alterations to the product or any of its parts, which have
been performed by a repair person not authorized by EURO-PRO Operating LLC.
This warranty is extended to the original purchaser of the unit and excludes all other legal
and/or conventional warranties. The responsibility of EURO-PRO Operating LLC if any,
is limited to the specific obligations expressly assumed by it under the terms of the limited
warranty. In no event is EURO-PRO Operating LLC liable for incidental or consequential
damages of any nature whatsoever. Some states/provinces do not permit the exclusion
or limitation of incidental or consequential damages, so the above may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state.
*Important: Carefully pack item to avoid damage in shipping. Be sure to include
proof of purchase and to attach a tag to item before packing with your name,
complete address and phone number with a note giving purchase information,
model number and what you believe is the problem with item. We recommend you
insure the package (as damage in shipping is not covered by your warranty). Mark
the outside of your package “ATTENTION CUSTOMER SERVICE”. We are
constantly striving to improve our products, therefore the specifications contained
herein are subject to change without notice.
9
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|