WWW.SHARKCLEAN.COM
LIFT-AWAY™ PRO
STEAM POCKET® MOP
S3901K N
OWNER’S GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901K_N_11_IB_E_120410_3.indd
1
12-04-10 11:40 AM
12. DO NOT put any objects into openings. Do not
21. Extreme caution should be exercised when
using this appliance to clean stairs.
use with any opening that is blocked.
13. DO NOT put hands or feet under the steam
22. Never use steam mop without the cleaning
pad attached.
mop. Unit gets very hot.
14. In mop mode use ONLY on flat, horizontal
surfaces. Do not use on walls, counters or
windows.
23. Keep your work area well lit.
24. Store steam mop indoors in a cool, dry
place.
15. DO NOT use on leather, wax polished furniture
or floors, synthetic fabrics, velvet or other
delicate, steam sensitive materials.
25. To avoid circuit overload, do not operate
another appliance on the same socket
(circuit) as the steam cleaner.
16. DO NOT add cleaning solutions, scented
perfumes, oils or any other chemicals to the
water used in this appliance as this may damage
the unit or make it unsafe for use. If you live in a
hard water area, we recommend using distilled
water in your steam mop.
26. If an extension cord is absolutely necessary,
an extension cord rated a minimum
of 15 ampere, 14 gage cord should be
used. Cords rated for less amperage may
overheat. Care should be taken to arrange
cord so that it cannot be pulled or tripped
over.
17. When in use, NEVER turn the appliance over
or on its side. NEVER DIRECT STEAM
TOWARDS PEOPLE, ANIMALS OR
PLANTS.
27 Always unplug and allow the steam mop
to cool before removing or changing mop
heads.
18. NEVER LEAVE THE STEAM MOP IN
ONE SPOT ON ANY SURFACE FOR ANY
PERIOD OF TIME WHEN THE CLEANING
PAD IS ATTACHED AS THIS WILL
DAMAGE YOUR FLOORS.
WARNING:Your steam mop is
designed to clean hard floor surfaces that
will withstand high heat. Do not use on
unsealed wood or unglazed ceramic floors.
On surfaces that have been treated with
wax or some no wax floors, the sheen
may be removed by the heat and steam
action. It is always recommended to test an
isolated area of the surface to be cleaned
before proceeding. We also recommend
that you check the use and care instructions
from the floor manufacturer.
19. Carefully remove the cleaning pad immediately
after you have unplugged and allowed the steam
mop to cool.
20. When cleaning the steam mop, unplug the
power cord from the electrical outlet and clean
with a dry or damp cloth. Do not pour water
or use alcohol, benzene or paint thinner on the
unit.
SAVE THESE INSTRUCTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901K_N_11_IB_E_120410_3.indd
3
12-04-10 11:40 AM
This manual covers model number: S3901K N 11
TECHNICAL SPECIFICATIONS
Voltage:
Power:
Water
120V., 60Hz.
1550 Watts
Capacity: 300ml (10.14 oz.)
TOLL FREE: 1-800-798-7398
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901K_N_11_IB_E_120410_3.indd
4
12-04-10 11:40 AM
Contents
Getting Started ................................................................................................... 2
Getting Started With Your Steam Mop ................................................................ 4
Using Your Steam Mop........................................................................................ 6
Using Your Carpet Glider..................................................................................... 9
Getting Started With Your Removable Handheld Steamer................................... 10
Using Your Removable Handheld Steamer with Direct Steam Nozzle.................. 11
Using Your Removable Handheld Steamer with Garment Steamer ..................... 12
Using Your Removable Handheld Steamer with Accessory Hose ......................... 13
Using Your Removable Handheld Steamer with Flat Scrubber............................. 14
Care and Maintenance........................................................................................ 15
Troubleshooting Guide........................................................................................ 17
Warranty............................................................................................................. 19
Thank you for
purchasing
the Shark®
Lift-Away™ Pro
Steam Pocket®
Mop.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901K_N_11_IB_E_120410_3.indd
1
12-04-10 11:40 AM
Getting Started
When assembling your steam mop there may be a little water in or around the water tank. This is because we
test all our steam mops 100% before you buy them, so you get a quality Shark® Lift-Away™ Pro Steam
Pocket® Mop.
a
j
k
m
o
l
d
b
c
n
p
q
r
h
i
e
f
g
j
Accessory Hose
a
Mop Handle
k
l
Direct Steam Nozzle
Flat Scrubber Tool
b
c
Steam Trigger
Removable Handheld Steamer
Handheld Steamer Housing
All-Purpose Mop Head
m All-Purpose Scrubber Pad for Flat Scrubber Tool
d
e
f
n
o
p
q
r
Garment Steamer and Bristle Frame
Garment Steamer Bonnet
Upholstery Bonnet
Assorted Two-Sided Cleaning Pads for the
All-Purpose Mop Head
Filling Flask
g
h
i
Carpet Glider
(1) 6mm x 48mm Large Screw*
Triangle Mop Head
*Phillips or flat head screwdriver can
be used. Screwdriver not included.
Two-Sided Cleaning Pads for the
Triangle Mop Head
2
TOLL FREE: 1-800-798-7398
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901K_N_11_IB_E_120410_3.indd
2
12-04-10 11:40 AM
Fig. 1
Fig. 4
Fig. 2
Fig. 5
Fig. 3
Fig. 6
ACCESSORIES:
CONTROLS:
DIRECT STEAM NOZZLE
STEAM TRIGGER
Loosen and dislodge compact dirt found in corners
When using the Handheld Steamer, press and hold
or tight places. (Fig. 1)
the steam trigger to start steaming. (Fig. 4)
GARMENT STEAMER & BRISTLE FRAME
STEAM SETTINGS
This is ideal for removing wrinkles from clothing and
freshening and grooming upholstery. (Fig. 2)
The Lift-Away™ Pro Steam Pocket® Mop
has three unique settings that can be used when
mopping your floors or with the handheld unit.
(Fig. 5)
FLAT SCRUBBER TOOL with ACCESSORY HOSE
Use with the accessory hose to clean a variety of
surfaces such as counter tops, walls, mirrors,and
windows. (Fig. 3)
ON/STEAM SETTING
Press the ON/STEAM SETTING button to
select the type of cleaning that you want. (Fig. 6)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901K_N_11_IB_E_120410_3.indd
3
12-04-10 11:40 AM
Getting Started with Your Steam Mop
fig. 1
fig. 2
STEAM MOP ASSEMBLY
IMPORTANT: Always make sure the mop is
UNPLUGGED from the wall when not in use.
Never fill the mop, attach the mop head, change
or remove the cleaning pad when the mop is
plugged into the wall. To prolong the life of your
Shark® Lift-Away™ Pro Steam Pocket®
Mop we recommend using distilled water. Make
sure you only add water to the tank. Chemicals
or cleaning solution may damage the appliance
and could be unsafe for you and your family.
1
2
Insert the Mop Handle end labeled “Front” into
the Steam Mop Housing. Make sure it is inserted
past the line printed on the pole. Secure the
assembled handle and pole by using the large
screw and a Phillips or a flat head screw driver
(screwdriver not included). (fig. 1)
Insert the Handheld Steamer into the Steam Mop
Housing. (fig. 2)
4
TOLL FREE: 1-800-798-7398
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901K_N_11_IB_E_120410_3.indd
4
12-04-10 11:40 AM
fig. 5
fig. 3
fig. 6
fig. 4
3
Select either the All-Purpose Mop Head or the
Triangle Mop Head and accompanying cleaning
pad. Use the lavender loop on the side of the
cleaning pad to slide the mop head into the pad
pocket. Then secure the quick fasteners on the
top of the pocket to lock in place. (fig. 3)
IMPORTANT: Do not use on unsealed wood
or unglazed ceramic floors. On surfaces that
have been treated with wax or some no wax
floors, the sheen may be removed by the heat
and steam action. It is always recommended to
test an isolated area of the surface to be cleaned
before proceeding. We recommend that you
check the use and care instructions from the
floor manufacturer.
4
5
Snap the mop head into the mop body by lining
up the groove on the back of the mop body with
the groove on the back of the mop head. Push
until you hear it latch into place. (fig. 4)
NOTE: To prolong the life of your Steam Mop, we
recommend using distilled water.
Turn the water tank cap counter clockwise and
remove from the tank. (fig. 5)
Use the filling flask and pour water into the tank.
Do not overfill. Replace the cap on the water
tank. (fig. 6)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901K_N_11_IB_E_120410_3.indd
5
12-04-10 11:40 AM
Using Your Steam Mop
IMPORTANT: Make sure you do not use the
mop without attaching a cleaning pad and
adding water to the tank first. When you are
using the mop for the first time, it might take
longer than the normal 30 seconds to start
steaming.
fig. 8
fig. 7
NOTE: Sweep or vacuum your floors prior to
cleaning with your Steam Mop.
1
2
Pull and twist the quick release cord holder to
unwrap the power cord completely. Plug into a
120-volt electrical outlet. (fig. 7)
quick cleaning products to complement your
Steam Mop, such as the Shark® Navigator™
Lift Away® vacuums.
The ON/STEAM SETTING button will be blue.
If the light does not turn on, reference the
troubleshooting section on page 17. (fig. 8)
6
TOLL FREE: 1-800-798-7398
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901K_N_11_IB_E_120410_3.indd
6
12-04-10 11:40 AM
fig. 10
fig. 9
fig. 11
3
Press the ON/STEAM SETTING button once for
DUST setting (DUST lighted setting indicator will
flash and turn solid blue when it is ready to use).
DUST setting is a light steam for a quick dusting
and best dry time. (fig. 9)
To better understand which steam setting to use
for your cleaning task, see page 8.
4
Clean your floors with a forward and backward
motion. (fig. 11)
When you are done, press the ON/STEAM
SETTING button until the light blinks blue as in
standby mode.
Press the ON/STEAM SETTING button twice for
MOP. MOP setting is for normal, everyday steam
cleaning. (fig. 10)
NOTE: When using your Shark® Lift-Away™
Pro Steam Pocket® Mop in MOP mode be
careful not to press the steam trigger on the
Handheld Steamer, as it will activate STEAM
SETTING mode. If this happens, press the ON/
STEAM SETTING button one time to reactivate
your steam selection.
Press the ON/STEAM SETTING button three
times for SCRUB. SCRUB setting is for heavy
cleaning and will leave floors damp.
After you have selected your desired steam
setting, the setting indicator light will flash and
turn solid blue when it is ready to use.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901K_N_11_IB_E_120410_3.indd
7
12-04-10 11:40 AM
Using Your Steam Mop - cont’d
The Shark® Lift-Away™ Pro Steam Pocket® Mop has three unique steam settings so
you can use the perfect amount of steam for the cleaning task at hand. See below for tips on
when to use each setting.
Setting
Ideal for These Surfaces
Recommended Usage
Laminate
Bamboo
Hardwood
Marble
Light cleaning and dusting
Loosen and lift light dirt
Sanitize floors
Basic, everyday cleaning
Hardwood
Marble
Tile
Remove spots and smaller messes
Clean moderate and heavily-trafficked areas
Sanitize floors
MOP
Stone
Tough cleaning and removal of stuck-on
messes and stains
Tile
Deep clean heavily-trafficked areas
Cut through heavy dirt and grime
Sanitize floors
Stone
Linoleum
SCRUB
Carpet
Freshen area rugs and carpets
(with Carpet Glider)
8
TOLL FREE: 1-800-798-7398
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901K_N_11_IB_E_120410_3.indd
8
12-04-10 11:40 AM
6
When the water tank is empty, the Steam
Mop will stop producing steam. You can refill
the water tank at any time as long as the
mop is unplugged from the outlet. Follow
the instructions from page 5. This applies to
switching the mop heads or cleaning pad as
well.
fig. 12
NOTE: Please wait 2-3 minutes for the Steam
Mop to cool off before switching the mop head
or the cleaning pad. Never leave the Steam Mop
with a damp/wet cleaning pad on any floor.
5
When one side of the cleaning pad gets dirty,
just flip the mop and you can quickly start using
the other side. (fig. 12)
Using Your Carpet Glider
The Steam Mop will not clean your carpeting or
area rugs. However, it is great for grooming and
freshening.
fig. 13
fig. 14
THE CARPET GLIDER
2
Move the Steam Mop back and forth across a
section of the carpet. (fig. 14)
1
The Carpet Glider can be used with the All-
Purpose Head to lightly steam your carpet and
area rugs. Just place the mop head with cleaning
pad attached into the glider. The recommended
steam setting is SCRUB when using the Carpet
Glider. (fig. 13)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901K_N_11_IB_E_120410_3.indd
9
12-04-10 11:40 AM
Getting Started With Your
Removable Handheld Steamer
Your Shark® Lift-Away™ Pro Steam Pocket®
Mop is designed to clean surfaces that
will withstand high heat and moisture.
Do not use on unsealed wood surfaces
(especially wooden antique furniture),
unglazed ceramic tile, painted surfaces
or surfaces that have been treated with
wax, oils, varnishes, or shellac. The sheen
may be removed by the heat, steam, and
friction of the cleaning tools. Lacquer and
polyurethane coatings provide a hard
durable protective finish that withstands
moisture, but it is always recommended to
test an isolated area of the surface to be
cleaned before proceeding.
fig. 15
We also recommend you check the use
and care instructions from the surface
manufacturer.
When cleaning finished wood surfaces,
use broad, continuous cleaning strokes. To
prevent surface damage, avoid focusing
steam or allowing the cleaning tools to sit
in one spot for any amount of time.
1
To remove the Handheld Steamer, press and
hold down the Handheld Release Buttons while
pulling out the Handheld Steamer. (fig. 15)
10
TOLL FREE: 1-800-798-7398
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901K_N_11_IB_E_120410_3.indd 10
12-04-10 11:40 AM
Using Your Removable Handheld Steamer
with Direct Steam Nozzle
Cleaning Tip: The Direct Steam Nozzle creates direct steam spray to clean and sanitize
hard to reach nooks & crannies and other places where germs may build up. Use the
Direct Steam Nozzle to loosen and dislodge compact dirt often found in corner and
tight places where traditional methods and cleaning tools tend to push dirt into,
making it tough to reach and clean. Spray direct steam and wipe clean with a wet cloth
or paper towel.
fig. 17
fig. 16
FOR SPOT CLEANING AND STEAMING
CAUTION: Do not press the steam trigger until
the Direct Steam Nozzle is snapped into the main
nozzle of your Handheld Steamer.
2
3
First attach the Direct Steam Nozzle by pressing
the nozzle onto the Handheld Steamer until it
clicks into place. (fig. 16)
4
To remove the Direct Steam Nozzle, press and
hold down the Handheld Release Buttons. Then
slide out the Direct Steam Nozzle using the grip.
The Handheld Steamer is automatically set to
SCRUB mode. Squeeze the steam trigger to
activate steam. To change modes press the ON/
STEAM SETTING button to select either DUST,
MOP or SCRUB mode. You can change the steam
mode while the Handheld Steamer is in standby
or in use. Once the selected setting indicator
light has turned blue, hold down the steam
trigger to start steaming. (fig. 17)
CAUTION: Do not press the steam trigger
while removing the Direct Steam Nozzle. Avoid
touching the tip of the Direct Steam Nozzle, as
this will be very hot after steaming.
NOTE: The Handheld Steamer may continue to
emit steam for a few seconds after the trigger is
released. This is normal, and the steaming will
eventually come to a stop.
For effective cleaning, hold the steam output
nozzle 1-2 inches away from the surface you’re
cleaning.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901K_N_11_IB_E_120410_3.indd 11
12-04-10 11:40 AM
Using Your Removable Handheld Steamer
with Garment Steamer
Cleaning Tip: The Garment Steamer is ideal for removing wrinkles from clothing and
freshening and grooming upholstery. A terry bonnet and frame with bristles provides
controlled steaming for most types of clothing. A specialized bonnet is ideal for
freshening couches and other upholstery, where odors may accumulate.
fig. 18
fig. 19
fig. 20
4
5
Attach the assembled Garment Steamer to the
Handheld Steamer by snapping it into the main
nozzle. (fig. 19)
CAUTION: Always determine color fastness
of any fabric, especially with reds or blues. Take
a clean, moist, warm towel and gently rub a
small area on the fabric that is as out of sight
and out of the way as possible. If color bleeds
onto the towel, you may need to have the piece
professionally cleaned.
Select the steam setting and wait until the
selected setting indicator light turns solid blue.
Press and hold the steam trigger button, and
move slowly up and down over your garments or
upholstery. (fig. 20)
1
2
Select either the garment steamer bonnet (terry
cloth material) to steam your garments, or the
upholstery bonnet (shaggy material) to freshen
upholstery.
CAUTION: Do not press the steam trigger
while attaching or removing the Garment
Steamer.
Use the lavender loop on the side of the bonnet
to slide over the nozzle opening of the Garment
Steamer. The elastic around the bonnet should
hold it firmly in place around the Garment
Steamer opening.
6
To remove the Garment Steamer attachment,
press and hold down the Handheld Release
Buttons. Then slide out the Garment Steamer
attachment using the grip on top of the
Handheld Steamer.
3
Snap the bristle frame over the Garment Steamer
attachment. For ease of use, we recommend that
the bristles be placed at the top of the Garment
Steamer bonnet. (fig. 18)
12
TOLL FREE: 1-800-798-7398
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901K_N_11_IB_E_120410_3.indd 12
12-04-10 11:40 AM
Using Your Removable Handheld Steamer
with Accessory Hose
fig. 21
fig. 22
1
To use the Accessory Hose, first attach the
Accessory Hose to the Handheld Steamer by
snapping the Accessory Hose into the main
nozzle. (fig. 21)
CAUTION: Do not press the steam trigger
while attaching or removing the Accessory Hose.
CAUTION: Do not use the Accessory Hose
without cleaning tools attached.
2
3
Select the desired cleaning tool for use. Follow
the cleaning tool sub-assembly instructions for
the selected tool.
NOTE: Additional attachments are available.
Please visit www.sharkclean.com
for more information.
To remove the Accessory Hose, press and hold
down the Handheld Release Buttons. Then slide
out the Accessory Hose using the grip. (fig. 22)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901K_N_11_IB_E_120410_3.indd 13
12-04-10 11:40 AM
Using Your Removable Handheld Steamer
with Flat Scrubber
Cleaning Tip: The Flat Scrubber is designed for cleaning a variety of surfaces and is
exceptional on those that are large and flat including counter tops, table tops, walls
mirrors, windows, stairs, shelves and other similar surfaces. Super absorbent bonnet
loosens, lifts, and locks in dirt and grime while sanitizing at the same time.
fig. 25
fig. 24
fig. 23
4
To remove the Flat Scrubber Tool, press and hold
down the Accessory Hose release button. Then
slide out the Flat Scrubber Tool. (fig. 25)
1
To attach the All-Purpose Scrubber Pad, place
the pad exterior side down on a flat surface
(lavender tab indicates the bottom of the pad)
and insert the top of the Flat Scrubber Tool into
the top portion of the pad and then pull the pad
over each side of the back edge.
CAUTION: Do not press the steam trigger
while attaching or removing the Flat Scrubber
Tool.
2
3
Press the Flat Scrubber Tool onto the Accessory
Hose until it clicks into place. (fig. 23)
CAUTION: Do not use the Flat Scrubber Tool
without the All-Purpose Scrubber Pad attached.
Select either DUST, MOP or SCRUB mode by
pressing the ON/STEAM SETTING button and
wait until the selected setting indicator light
turns solid blue. Hold down the steam trigger to
start steaming. (fig. 24)
14
TOLL FREE: 1-800-798-7398
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901K_N_11_IB_E_120410_3.indd 14
12-04-10 11:40 AM
Care and Maintenance
fig. 27
fig. 26
fig. 28
fig. 29
AFTER USE AND STORAGE
1
2
When you have finished using the Handheld
Steamer, reattach it to the mop by first placing
the bottom of the Handheld Steamer into the
cradle of the mop housing. (fig. 26)
4
5
Empty the water tank before
storage. Remove the water tank cap and empty
the tank over a sink. Replace the water cap.
(fig. 28)
To store the Shark® Lift-Away™ Pro Steam
Pocket® Mop hanging up, first remove the
head (after it has cooled and the steam has been
released) then hang on a large hook. (fig. 29)
Then slide the top end of the Handheld Steamer
into the mop housing and snap into place.
NOTE: Make sure all attachments are removed
before reuniting the Handheld Steamer with the
Steam Mop.
3
If you have finished mopping, press the ON/
STEAM SETTING button until the LED light blinks
blue. This stops the unit from steaming. Unplug
the cord from the outlet and place the mop into
the upright position. Let the unit cool for 2-3
minutes.
Remove the cleaning pad by releasing the quick
fasteners and using the lavender loop on the
side of the pocket, avoiding contact with the hot
pad or dirt. (fig. 27)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901K_N_11_IB_E_120410_3.indd 15
12-04-10 11:40 AM
Care and Maintenance - cont.
Cleaning Tip: To prevent clogging, it is
recommended that you periodically clean the
Direct Steam Nozzle and the extension hose
stem with the cleaning tool provided or a
paper clip.
fig. 30
fig. 31
fig. 32
CARE OF YOUR CLEANING PAD AND
BONNETS
CLEANING THE NOZZLE
1
Your Handheld Steamer should not normally
require cleaning, however, should you notice
a decrease in the steam output, it may be
necessary to remove mineral deposits built up
around the nozzles.
1
2
We recommend washing your cleaning pad and
bonnets separately from other fabrics to avoid
picking up lint. Only use liquid detergent (no
powder detergent). Do not use any fabric
softeners or bleach. Line dry or dry on a low
dryer setting. (fig. 30)
2
3
Unplug the cleaner from the electrical outlet.
Use the provided nozzle cleaning tool or a small
diameter stiff metal wire, such as a straightened
metal paperclip, and carefully insert the end of
the wire into the nozzle orifice. See illustration
above. (fig. 32)
If there are loose threads on the cleaning pad
carefully cut the thread with scissors. Do not pull
on them or cut at the base. (fig. 31)
IMPORTANT: The cleaning pad and bonnets
may be very hot from the steam. Use caution
when removing. Let the unit cool for 2-3
minutes.
4
5
Move the wire back and forth several times to
remove any deposits.
Plug in the appliance to the power outlet and
test steam output.
16
TOLL FREE: 1-800-798-7398
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901K_N_11_IB_E_120410_3.indd 16
12-04-10 11:40 AM
Troubleshooting Guide
PROBLEM
POSSIBLE REASONS & SOLUTIONS
Your steam mop should be securely plugged into a 120V AC electrical outlet only.
Check your fuse or breaker.
The Shark® Lift-Away™
Pro Steam Pocket® Mop
will not turn-on.
If your unit still does not work, call Customer Care at 1-800-798-7398.
Is there water in the water tank? If not, add water to your steam mop following
instructions on page 5.
The unit will not
make steam.
If the unit still does not make steam, follow the instructions on page 16 to clean the
nozzle.
The Shark® Lift-Away™
Pro Steam Pocket® Mop
leaves water on the floor.
Check to see if your cleaning pad is too wet. We recommend you unplug the steam mop
and change the cleaning pad.
Make sure the cleaning pad is attached correctly.
If you have already plugged in your unit, unplug and try a different outlet. This may reset
the standby mode.
Cannot activate steam /
flashing blue light remains
on.
Add water to the tank and select steam setting by pressing the ON/STEAM SETTING
button.
If your unit still does not work, call Customer Care at 1-800-798-7398.
The Shark® Lift-Away™
Pro Steam Pocket® Mop
left a white spot on the floor.
Do not leave your steam mop on the floor with a damp or wet cleaning pad.
If you’re using tap water, we recommend switching to distilled water.
Make sure the cap is securely on the water tank.
The cleaning pad might be dirty. Flip or change the cleaning pad.
If you washed the cleaning pad with powder detergent, then your pad could be damaged
This could also be an indication of prior soap or grease residue that has accumulated
on the floor. As our steam mops use only a small amount of water, it may not be wet
enough to rinse off the accumulation that the steam is bringing to the surface. We
suggest rinsing the floor with nothing but water, letting it dry, and then steam mopping
again with a clean pad. One or more rinses generally removes the residue.
Floors are cloudy, streaky
or spotty after steaming.
A more stubborn case may require you to rinse the floor with a mix of one part vinegar
and two parts water.
The Shark® Lift-Away™
Pro Steam Pocket® Mop
is hard to push.
Make sure the cleaning pad is attached correctly.
Check to see if the cleaning pad is excessively dirty. If so, replace the cleaning pad.
The garment steam bonnet or the upholstery bonnet must be in place at all times during
usage. The steamer bonnet prevents water drops from being left on the garment or the
upholstery and removes impurities from your water.
The nozzle leaves water
drops on the garment or
upholstery.
If the steamer bonnet is too wet or the frame has condensation, let the unit cool for 30
minutes, remove the steamer bonnet and let it dry out before using again, or replace
with a new steamer bonnet.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901K_N_11_IB_E_120410_3.indd 17
12-04-10 11:40 AM
Notes
18
TOLL FREE: 1-800-798-7398
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901K_N_11_IB_E_120410_3.indd 18
12-04-10 11:40 AM
ONE (1) YEAR LIMITED WARRANTY
EURO-PRO Operating LLC warrants this product to be free from defects in material and
workmanship for a period of one (1) year from the date of the original purchase, when utilized for
normal household use, subject to the following conditions, exclusions and exceptions.
If your appliance fails to operate properly while in use under normal household conditions within
the warranty period, return the complete appliance and accessories, freight prepaid. For Customer
If the appliance is found to be defective in material or workmanship, EURO-PRO Operating
LLC will repair or replace it free of charge. Proof of purchase date and $ 14.95 to cover the cost of
return shipping and handling must be included. *
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or
replacement of the unit at our option. This warranty does not cover normal wear of parts and does
not apply to any unit that has been tampered with or used for commercial purposes. This limited
warranty does not cover damage caused by misuse, abuse, negligent handling or damage due
to faulty packaging or mishandling in transit. This warranty does not cover damage or defects
caused by or resulting from damages from shipping or repairs, service or alterations to the product
or any of its parts, which have been performed by a repair person not authorized by EURO-PRO
Operating LLC.
This warranty is extended to the original purchaser of the unit and excludes all other legal and/or
conventional warranties. The responsibility of EURO-PRO Operating LLC warranty if any, is
limited to the specific obligations expressly assumed by it under the terms of the limited warranty.
In no event is EURO-PRO Operating LLC liable for incidental or consequential damages
of any nature whatsoever. Some states/provinces do not permit the exclusion or limitation of
incidental or consequential damages, so the above may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state or province to province.
*Important: Carefully pack item to avoid damage in shipping. Be sure to
include proof of purchase date and to attach tag to item before packing with
your name, complete address and phone number with a note giving purchase
information, model number and what you believe is the problem with the item.
We recommend you insure the package (as damage in shipping is not covered
by your warranty). Mark the outside of your package “ATTENTION CUSTOMER
SERVICE”. We are constantly striving to improve our products, therefore the
specifications contained herein are subject to change without notice.
Product Registration
ten (10) days of purchase. You will be asked to provide the store name, date of purchase and model number
along with your name and address.
The registration will enable us to contact you in the unlikely event of a product safety notification. By
registering you acknowledge to have read and understood the instructions for use, and warnings set forth in the
accompanying instructions.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901K_N_11_IB_E_120410_3.indd 19
12-04-10 11:40 AM
EURO-PRO Operating LLC
U.S.: Newton, MA 02459
Canada: Ville St. Laurent, Québec H4S 1A7
1-800-798-7398
COPYRIGHT © 2012 EURO-PRO OPERATING LLC
PRINTED IN CHINA
S3901K_N.E.120410.3
Illustrations may differ from actual product.
Download from Www.Somanuals.com. All Manuals Search And Download.
S3901K_N_11_IB_E_120410_3.indd 20
12-04-10 11:40 AM
|