7600A
Snow Blower
Pub 06-05
Part No. 5047P
PART'S MANUAL
An Operator's Manual was shipped with the equipment in the
Manual Canister. This Operator's Manual is an integral part of
the safe operation of this machine and must be maintained
with the unit at all times. READ, UNDERSTAND, and FOLLOW
the Safety and Operation Instructions contained in this manual
before operating the equipment. If the Operator's Manual is
not with the equipment, contact your dealer or Servis-Rhino
(800-446-5158) to obtain a Free copy before operating the
equipment.
RHINO®
1020 S. SangamonAve.
Gibson City, IL 60936
800-446-5158
Email: [email protected]
© 2005 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS
SECTION
Parts Section – 1
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS ORDERING GUIDE
Thefollowinginstructionsareofferedtohelpeliminateneedlessdelayanderrorinprocessing
purchase orders for the equipment in this section.
1. The Parts Section is prepared in logical sequence and grouping of parts that belong to the
basic machine featured in this manual. Part Numbers and Descriptions are given to help
locate the parts and quantities required.
2. The Purchase Order must include the name and address of the person or organization
ordering the parts, who should be charged, and if possible, the serial number of the machine
for which the parts are ordered.
3. ThePurchaseOrdermustclearlylistthequantityofeachpart, thecompleteandcorrectpart
number (be sure to include all periods), and the basic name of the part.
4. The Manufacturer reserves the right to substitute parts where applicable.
5. Somepartsareunlisteditemswhicharespecialproductionitemsnotnormallystockedand
are subject to special handling. Request a quotation for such parts before sending a
PurchaseOrder.
6. The Manufacturer reserves the right to change prices without prior notice.
NOTE:
Please refer to The Safety Section in the front of this Manual for the proper
Part Number when ordering Replacement Safety Decals.
For maximum safety and to guarantee optimum product reliability, always use
genuine Servis-Rhino Parts. The use of inferior replacement parts may cause
premature or catastrophic failure which could result in serious injury or death.
Direct any questions regarding parts to:
RHINO®
1020 S. Sangamon Ave.
Gibson City, IL 60936
800-446-5158
Email: [email protected]
Parts Section – 2
©2005 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
PART NAME INDEX
CABLE ASSEMBLY................................................................................................................................................................ 6
CATEGORY 2 & 3 QUICK HITCH ASSEMBLY................................................................................................................... 13
CATEGORY 2 QUICK HITCH ASSEMBLY.......................................................................................................................... 11
CHAIN IDLER ASSEMBLY..................................................................................................................................................... 9
DRIVELINE ASSEMBLY (OPTIONAL) - 00784015 ............................................................................................................. 16
DRIVELINE ASSEMBLY (OPTIONAL) - 00784016 ............................................................................................................. 17
FAN DRIVE ASSEMBLY ........................................................................................................................................................ 4
HYDRAULIC CYLINDER & HOSE KIT (OPTIONAL)........................................................................................................... 15
INTERNAL DRIVE ASSEMBLY.............................................................................................................................................. 8
OIL TANK PARTS .................................................................................................................................................................. 7
STANDARD CATEGORY 2 & 3 WITHOUT QUICK HITCH ASSEMBLY............................................................................ 12
STANDARD CATEGORY 3 HITCH WITHOUT QUICK HITCH ASSEMBLY....................................................................... 14
3-POINT HITCH ASSEMBLY ............................................................................................................................................... 10
7600A Snowblower (June-05) -Current
©2005 Alamo Group Inc.
Parts Section – 3
Download from Www.Somanuals.com. All Manuals Search And Download.
FAN DRIVE ASSEMBLY
7600A Snowblower (June-05) -Current
©2005 Alamo Group Inc.
Parts Section – 4
Download from Www.Somanuals.com. All Manuals Search And Download.
FAN DRIVE ASSEMBLY
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
4
5
6
7
8
00784674
00784695
00783596
00783720
00783737
7D5118
00783051
00783105
00784547
00001200
00035900
00011700
00001200
00725073
00784702
1
4
2
2
2
1
2
2
2
4
4
4
16
2
2
FAN -CW
INNER BUSHING
1 15/16" BEARING, FLANGED
SPROCKET
# 80 ROLLER CHAIN
CONNECTOR LINK #80
FAN SHAFT
CAP
SHEAR BOLT
1/2-UNC NUT
HHCS 5/16-18UNC 3/4 PL5
LOCKWASHER 5/16 PL STD
NUT,HEX 1/2 NC PL
SQ KEY, 1/2 X 2-1/2
SPACER, FAN UHMW
9
10
11
12
13
14
15
7600A Snowblower (June-05) -Current
©2005 Alamo Group Inc.
Parts Section – 5
Download from Www.Somanuals.com. All Manuals Search And Download.
CABLE ASSEMBLY
ITEM
PART NO.
00992000
60042
QTY.
DESCRIPTION
1
2
35
1/2’
6
CABLE, 1/4 X 35 -1/2FT
WIRE ROPE CLAMP 1/4
7600A Snowblower (June-05) -Current
©2005 Alamo Group Inc.
Parts Section – 6
Download from Www.Somanuals.com. All Manuals Search And Download.
OIL TANK PARTS
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
4
5
6
7
00783029
00783037
00011400
00784028
00783692
03101646
00011100
1
1
6
1
14’
6
6
COVER, CHAIN CASE
DIPSTICK
HHCS 3/8 NC 1 PL5
1" MAGNETIC DRAIN PLUG
3/8" X 1" OIL BATH SEALER 15’
LOCKWASHER,3/8,MEDIUM-ZP
FLATWASHER 3/8 PL STD
7600A Snowblower (June-05) -Current
©2005 Alamo Group Inc.
Parts Section – 7
Download from Www.Somanuals.com. All Manuals Search And Download.
INTERNAL DRIVE ASSEMBLY
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
4
5
6
7
8
00783050
00783596
00783720
00783598
00750952
00001400
33007C
00001200
40662.75
00784566
00784565
00002700
1
5
4
1
2
2
4
40
2
1
1
4
DRIVE SHAFT
FLANGE BEARING 1-5/16"
SPROCKET X 21 TOOTH
PILLOW BLOCK BEARING, 1-5/16"
HEXB,5/8NC X 2-1/2,ZP,GRD5
FLATWASHER 5/8 PL STD
HEX NUT 5/8-11
NUT,HEX 1/2 NC PL
9
KEY, 1/2 X 1/2 X 2-1/4
SHIELD, SAFETY DRIVE
PLATE, REINFORCEMENT
FLATWASHER 1/2 PL
10
11
12
7600A Snowblower (June-05) -Current
©2005 Alamo Group Inc.
Parts Section – 8
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAIN IDLER ASSEMBLY
ITEM
PART NO.
QTY.
DESCRIPTION
1
00784038
28AN
3-POINT HITCH ASSEMBLY
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
4
5
6
7
00784030
00784031
00784032
00784033
00784034
00784035
0838404
1
2
2
1
2
2
5
UPPER 3PT HITCH PIN
LOWER CAT III HITCH PIN
LOWER CAT II HITCH PIN
BUSHING, UPPER HITCH PIN
BUSHING, LOWER INNER HITCH PIN
BUSHING, LOWER OUTER HITCH PIN
KLICK PIN 7/16 X 2
7600A Snowblower (June-05) -Current
©2005 Alamo Group Inc.
Parts Section – 10
Download from Www.Somanuals.com. All Manuals Search And Download.
CATEGORY 2 QUICK HITCH ASSEMBLY
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
4
00784030
00784031
00784033
0838404
1
2
1
3
UPPER 3PT HITCH PIN
LOWER CAT III HITCH PIN
BUSHING, UPPER HITCH PIN
KLICK PIN 7/16 X 2
7600A Snowblower (June-05) -Current
©2005 Alamo Group Inc.
Parts Section – 11
Download from Www.Somanuals.com. All Manuals Search And Download.
STANDARD CATEGORY 2 & 3 WITHOUT QUICK HITCH ASSEMBLY
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
4
5
00784030
00784032
00784034
00784035
0838404
1
2
2
2
3
UPPER 3PT HITCH PIN
LOWER CAT II HITCH PIN
BUSHING, LOWER INNER HITCH PIN
BUSHING, LOWER OUTER HITCH PIN
KLICK PIN 7/16 X 2
7600A Snowblower (June-05) -Current
©2005 Alamo Group Inc.
Parts Section – 12
Download from Www.Somanuals.com. All Manuals Search And Download.
CATEGORY 2 & 3 QUICK HITCH ASSEMBLY
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
4
00784030
00784031
00784033
0838404
1
2
1
3
UPPER 3PT HITCH PIN
LOWER CAT III HITCH PIN
BUSHING, UPPER HITCH PIN
KLICK PIN 7/16 X 2
7600A Snowblower (June-05) -Current
©2005 Alamo Group Inc.
Parts Section – 13
Download from Www.Somanuals.com. All Manuals Search And Download.
STANDARD CATEGORY 3 HITCH WITHOUT QUICK HITCH ASSEMBLY
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
4
5
00784030
00784031
00784033
00784035
0838404
1
2
1
2
3
UPPER 3PT HITCH PIN
CAT III HITCH PIN
BUSHING, UPPER HITCH PIN
BUSHING, LOWER OUTER HITCH PIN
KLICK PIN 7/16 X 2
7600A Snowblower (June-05) -Current
©2005 Alamo Group Inc.
Parts Section – 14
Download from Www.Somanuals.com. All Manuals Search And Download.
HYDRAULIC CYLINDER & HOSE KIT (OPTIONAL)
ITEM
PART NO.
QTY.
DESCRIPTION
2457104
2417158
2417157
2417160
00774737
00774748
00774742
3047104
492110
-----------
-----------
-----------
-----------
1
1
1
1
1
1
4
2
4
4
1
1
1
2
1
1
CYLINDER,HYDRAULIC 3 X 8
CAP,CYLINDER CLEVIS
CAP,CYLINDER ROD
PISTON,CYLINDER
ROD CYL 1.25-08-1.00-1.25-A
TUBE CYL 3.00-08.00
TIE ROD 1/2-08
PIN, 1
HAIRPIN CLIP 7/8
END CAP O-RING
ROD WIPER SEAL
ROD DUST SEAL
PISTON SEAL
PISTON WEAR RING
THREAD LOCK
ROD CLEVIS
1
2
3
4
5
6
7
8
10
11
13
14
15
16
17
18
20
25
27
40
41
42
43
44
*
-----------
3047117
1917140
0116000
33005H5C
5JRC16140
1917132
----------
1937156
03200588
00784528
02975530
00784087
1
8
1
1
SHSS 3/8 NC 1/2
NUT,HEX 1/2-13 UNC GR.5 PLT
LOCKNUT 1 -14 TLDT GC ZP
SCKT HD O-RNG PLUG,3/4-16 UNF,
END CAP BACKUP WASHERS
ADAPTER, ELBOW-W/RESTRICTOR -8MB -6MJ
ADAPTER, ELBOW- 8MB -6MJ
ASY, HOSE # 6 X 120 LG.
SEAL KIT (NOT SHOWN)
INCLUDED IN HOSE KIT
2
1*
1*
2*
1*
7600A Snowblower (June-05) -Current
©2005 Alamo Group Inc.
Parts Section – 15
Download from Www.Somanuals.com. All Manuals Search And Download.
DRIVELINE ASSEMBLY (OPTIONAL) - 00784015
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
4
5
6
9
10
11
12
13
14
2716820
0136416
W507
1
1
2
1
2
1
1
1
1
1
1
1
REPAIR KIT-SAFETY SLIDE LOCK Y
SLIDE LOCK YOKE-1 3/8-21 SPL,5
CTR CROSS KIT
00784049
00780376
00756005
00756004
00784050
00784051
00784046
00784047
00784048
YOKE & SHAFT
NYLON BEARING & KEEPER
DECAL-ROTATING DRIVELINE
DECAL-SHIELD MISSING
YOKE, TUBE & SLIP SLEEVE
YOKE
SET, SHIELD GUARD
ASY, JOINT & TUBE 1/2 W/ GUARD (NOT SHOWN)
ASY, JOINT & SHAFT 1/2 W/ GUARD (NOT SHOWN)
7600A Snowblower (June-05) -Current
©2005 Alamo Group Inc.
Parts Section – 16
Download from Www.Somanuals.com. All Manuals Search And Download.
DRIVELINE ASSEMBLY (OPTIONAL) - 00784016
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
4
5
6
9
10
11
12
13
14
00724738
00725126
W507
1
1
2
1
2
1
1
1
1
1
1
1
KIT-SLIDE COLLAR REPAIR
YOKE SLIDE LOCK 1-3/4-20 SPL.
CTR CROSS KIT
00784049
00780376
00756005
00756004
00784050
00784051
00784046
00784047
00784052
YOKE & SHAFT
NYLON BEARING & KEEPER
DECAL-ROTATING DRIVELINE
DECAL-SHIELD MISSING (NOT SHOWN)
YOKE, TUBE & SLIP SLEEVE
YOKE
SET, SHIELD GUARD (NOT SHOWN)
ASY, JOINT & TUBE 1/2 W/ GUARD (NOT SHOWN)
ASY, JOINT & SHAFT 1/2 W/ GUARD (NOT SHOWN)
7600A Snowblower (June-05) -Current
©2005 Alamo Group Inc.
Parts Section – 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
SERVIS-RHINO
LIMITED WARRANTY
1. LIMITED WARRANTIES
1.01.Servis-Rhino warrants for one year from the purchase date to the original non-commercial, governmental, or municipal
purchaser (“Purchaser”) and warrants for six months to the original commercial or industrial purchaser (“Purchaser”)
that the goods purchased are free from defects in material or workmanship.
1.02.Manufacturer will replace for the Purchaser any part or parts found, upon examination at one of its factories, to be
defective under normal use and service due to defects in material or workmanship.
1.03.This limited warranty does not apply to any part of the goods which has been subjected to improper or abnormal use,
negligence, alteration, modification, or accident, damaged due to lack of maintenance or use of wrong fuel, oil, or
lubricants, or which has served its normal life. This limited warranty does not apply to any part of any internal
combustion engine, or expendable items such as blades, shields, guards, or pneumatic tires except as specifically found
in your Operator’s Manual.
1.04.Except as provided herein, no employee, agent, Dealer, or other person is authorized to give any warranties of any
nature on behalf of Manufacturer.
2. REMEDIES AND PROCEDURES.
2.01.This limited warranty is not effective unless the Purchaser returns the Registration and Warranty Form to Manufacturer
within 30 days of purchase.
2.02.Purchaser claims must be made in writing to the Authorized Dealer (“Dealer”) from whom Purchaser purchased the
goods or an approved Authorized Dealer (“Dealer”) within 30 days after Purchaser learns of the facts on which the
claim is based.
2.03.Purchaser is responsible for returning the goods in question to the Dealer.
2.04.If after examining the goods and/or parts in question, Manufacturer finds them to be defective under normal use and
service due to defects in material or workmanship, Manufacturer will:
(a) Repair or replace the defective goods or part(s) or
(b) Reimburse Purchaser for the cost of the part(s) and reasonable labor charges (as determined by Manufacturer)
if Purchaser paid for the repair and/or replacement prior to the final determination of applicability of the warranty
by Manufacturer.
The choice of remedy shall belong to Manufacturer.
2.05.Purchaser is responsible for any labor charges exceeding a reasonable amount as determined by Manufacturer and
for returning the goods to the Dealer, whether or not the claim is approved. Purchaser is responsible for the trans-
portation cost for the goods or part(s) from the Dealer to the designated factory.
3. LIMITATION OF LIABILITY.
3.01.MANUFACTURER DISCLAIMS ANY EXPRESS (EXCEPT AS SET FORTH HEREIN) AND IMPLIED WARRANTIES
WITH RESPECT TO THE GOODS INCLUDING, BUT NOT LIMITED TO, MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE.
3.02.MANUFACTURER MAKES NO WARRANTY AS TO THE DESIGN, CAPABILITY, CAPACITY, OR SUITABILITY FOR
USE OF THE GOODS.
3.03.EXCEPT AS PROVIDED HEREIN, MANUFACTURER SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO
PURCHASER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS, OR DAMAGE
CAUSED OR ALLEGED TO BE CAUSED DIRECTLY OR INDIRECTLY BY THE GOODS INCLUDING, BUT NOT
LIMITED TO, ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES RESULTING FROM
THE USE OR OPERATION OF THE GOODS OR ANY BREACH OF THIS WARRANTY. NOT WITHSTANDING THE
ABOVE LIMITATIONS AND WARRANTIES, MANUFACTURER’S LIABILITY HEREUNDER FOR DAMAGES
INCURRED BY PURCHASER OR OTHERS SHALL NOT EXCEED THE PRICE OF THE GOODS.
3.04.NO ACTION ARISING OUT OF ANY CLAIMED BREACH OF THIS WARRANTY OR TRANSACTIONS UNDER
THIS WARRANTY MAY BE BROUGHT MORE THAN TWO (2) YEARS AFTER THE CAUSE OF ACTION HAS
OCCURRED.
4. MISCELLANEOUS.
4.01.Proper Venue for any lawsuits arising from or related to this limited warranty shall be only in Guadalupe County,
Texas.
4.02.Manufacturer may waive compliance with any of the terms of this limited warranty, but no waiver of any terms shall
be deemed to be a waiver of any other term.
4.03.If any provision of this limited warranty shall violate any applicable law and is held to be unenforceable, then the
invalidity of such provision shall not invalidate any other provisions herein.
4.04.Applicable law may provide rights and benefits to purchaser in addition to those provided herein.
KEEP FOR YOUR RECORDS
ATTENTION: Purchaser should fill in the blanks below for his reference when buying repair parts and/or for proper machine
identification when applying for warranty.
Servis-Rhino Implement Model _______________________________ Serial Number ________________________________
Date Purchased __________________________________________ Dealer ______________________________________
RHINO®
ATTENTION:
READ YOUR OPERATOR'S MANUAL
1020 S. SangamonAve.
Gibson City, IL60936
R
800-446-5158
Email: [email protected]
Download from Www.Somanuals.com. All Manuals Search And Download.
TO THE OWNER/OPERATOR/DEALER
Tokeepyourimplementrunningefficientlyandsafely,readyourmanualthoroughlyandfollowthesedirectionsand
the Safety Messages in this Manual. The Table of Contents clearly identifies each section where you can easily
find the information you need.
The OCCUPATIONAL SAFETY AND HEALTH ACT (1928.51 Subpart C) makes these minimum safety
requirementsoftractoroperators:
REQUIREDOFTHEOWNER:
1. Provide a Roll-Over-Protective Structure that meets the requirements of this Standard; and
2. Provide Seatbelts that meet the requirements of this paragraph of this Standard and SAE J4C; and
3. Ensure that each employee uses such Seatbelt while the tractor is moving; and
4. Ensure that each employee tightens the Seatbelt sufficiently to confine the employee to the protected
area provided by the ROPS.
REQUIREDOFTHEOPERATOR
1. Securely fasten seatbelt if the tractor has a ROPS.
2. Where possible, avoid operating the tractor near ditches, embankments, and holes.
3. Reduce speed when turning, crossing slopes, and on rough, slick, or muddy surfaces.
4. Stay off slopes too steep for safe operation.
5. Watch where you are going - especially at row ends, on roads, and around trees.
6. Do not permit others to ride.
7. Operate the tractor smoothly - no jerky turns, starts, or stops.
8. Hitch only to the drawbar and hitch points recommended by the tractor manufacturer.
9. When the tractor is stopped, set brakes securely and use park lock, if available.
Keep children away from danger all day, every day...
Equip tractors with rollover protection (ROPS) and keep all machinery
guards in place...
Please work, drive, play and live each day with care and concern for
your safety and that of your family and fellow citizens.
Download from Www.Somanuals.com. All Manuals Search And Download.
7600A PL 06/05
Printed U.S.A.
P/N 5047P
Download from Www.Somanuals.com. All Manuals Search And Download.
|