SRS Labs Projector 8953H User Manual

^P8^r9^oje5^c3^toH^r

User's Manual (detailed)

Network Guide

Thank you for purchasing this projector.

This projector has the network function that brings you the following main features.

ü Live Mode

This projector can project your PC images on screen through wireless or wired

network, which can erase a signal cable from your desk.

ü Quick connection to your network

No expert knowledge is required any more. Various options for network setting

give you a quick and simple connection to the network.

ü Web control

The projector can be controlled and monitored by a web browser software on

your PC, which can help you to setup and maintain the projector.

ü PC-LESS Presentation

This projector can project images stored in an SD memory or a USB memory

on screen, which allow you not to bring your PC with you.

This manual is only intended to explain Network functions only.

For safety, operations or any other issues, refer to the Safety Guide and User’s

Manual (concise and detailed).

WARNING ►Before using this product, be sure to read all manuals for this

product. After reading them, store them in a safe place for future reference.

NOTE • The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in

this manual.

• The reproduction, transfer or copy of all or any part of this document is not

permitted without express written consent.

Trademark acknowledgment

• Microsoft and Internet Explorer, Windows, Windows NT, Windows Me, Windows

Vista are registered trademark of Microsoft Corporation.

PowerPC is a registered trademark of International Business Machines Corporation.

•

• VESA and DDC are trademarks of the Video Electronics Standard Association.

• Apple and Macintosh, Mac, Mac OS are registered trademarks of Apple Inc.

• Pentium is a registered trademark of Intel Corporation.

• JavaScript is a registered trademark of Sun Microsystems, Inc.

• DVI is a trademark of Digital Display Working Group.

• HDMI, the HDMI logo and High-Deﬁnition Multimedia Interface are trademarks

or registered trademarks of HDMI Licensing LLC.

•

is a trademark of SRS Labs, Inc. WOW technology is incorporated under

license from SRS Labs, Inc.

All other trademarks are the properties of their respective owners.

Download from Www.Somanuals.com. All Manuals Search And Download.

Caution

[Restriction in terms of inserts or pulls storage media and wireless network card]

Do not pull out the wireless network card while the power is on. Do not touch the

SD card while being accessed. The storage media can be pulled out only while

not being accessed.

Perform the REMOVE MEDIA procedure or turn the projector off before pulling out

the media. To perform the REMOVE MEDIA procedure, choose an suitable item

among the REMOVE ALL, REMOVE SD CARD or REMOVE USB using the PC-

LESS PRESENTATION menu under the MIU menu. (MIU menu in the User’s

Manual (detailed) – Operating Guide)

CAUTION

The accompanying IEEE802.11b/g wireless network card uses the 2.4GHz radio

nꢀ

frequency band. You do not need a radio license to use this card, but you should be

aware of the following:

DO NOT USE NEAR THE FOLLOWING!

lꢀ

• Microwave ovens

• Industrial, scientiﬁc or medical devices

• Designated low power radio stations

• Premises radio stations

Using the wireless network card near the above may result in radio interference,

which in turn may result in a decrease in communication speed and even a

complete loss of communication.

Depending on the location where you attempt to use the wireless network card,

lꢀ

there may be interference with the radio waves, which may result in a decrease in

communication speed and even a complete loss of communication. In particular,

please be aware that using the wireless network card in locations where there is

reinforced steel, other metals and concrete may interfere with radio communication.

Available Channels

lꢀ

The wireless network card uses the 2.4GHz radio frequency band, but depending on

the country or region you are in, you might be limited to the channels you can use.

Please refer to the following table for conﬁrming where and with what channels you

may use the accompanying IEEE802.11b/g wireless network card. Please consult

with your dealer for countries not included in the table.

Country or Region

Available Channel

1 to 11

Japan

USA

1 to 11

Taiwan

1 to 11

Canada

1 to 11

UK, Spain, Germany, Italy, Austria, Switzerland,

Belgium, Sweden, Netherlands, Portugal,

Denmark, Finland, Greece, Norway, France,

Ireland, Luxembourg, Iceland

1 to 11

You may not bring the wireless network card into countries not listed above as there

lꢀ

is a possibility that use of the wireless network card in those countries could lead to

an infringement of established radio laws.

Download from Www.Somanuals.com. All Manuals Search And Download.

Caution

0560

The manufacturer (Gemtek) hereby declare that this equipment (the wireless

network card), model SD-Link11g is in compliance with the essential requirements

and other relevant provisions of Directive 1999/5/EC.

Download from Www.Somanuals.com. All Manuals Search And Download.

1. Main functions

1.1 Live Mode (Project images from PC)

The MIU (Multi Information processing Unit) enables “Wireless presentation” by

choosing Live Mode.

The Live Mode gives you an ability to display the same image that is shown on

the PC through the network by using an application program “Live Viewer 3” that

is required to install into your PC. (Fig.1.1.a)

The “Live Viewer 3” captures PC screen image and sends to the projector through

wired LAN or wireless LAN connection. (20)

Live Viewer 3

Fig. 1.1.a “Live Viewer 3” outlines (through wireless LAN connection)

Fig. 1.1.b “Live Viewer 3” Main menu

One projector can be connected with up to 4 PCs using “Live Viewer 3”. (54)

Download from Www.Somanuals.com. All Manuals Search And Download.

1. Main functions

1.2 Quick connection to your network

The “Live Viewer 3” brings you very quick and simple connection to your network.

The “Live Viewer 3” prepares some options for you to match your requirement.

1) Quick connection by the Passcode

The Passcode is a code that includes SSID and IP address and other information

that are required for the network connection. The Passcode is given on screen by

the projector, and then all you need to do is to input the code to the “Live Viewer 3”

in your PC. (26)

Fig.1.2 PASSCODE on the projector screen

2) Connection by the proﬁle for the network

You can set the information to connect the projector to your network as a proﬁle

data in the “Live Viewer 3” in your PC. After that, you just select the proﬁle data on

the “Live Viewer 3” to connect the projector to your network.

3) Connection by the history record for the network

Once you connect the projector to your network with the “Live Viewer 3”, the

“Live Viewer 3” stores the history. You just select a history record to connect the

projector to your network.

Download from Www.Somanuals.com. All Manuals Search And Download.

1. Main functions

1.3 Conﬁguring and controlling via a web browser

You can adjust or control the projector via a network from a web browser on a PC

that is connected to the same network.

Logon the network from the web browser and it offers the menus to conﬁgure

the network settings, monitor the projector and so on. The Web Remote Control,

one of the menus of web browser, allows you to control the projector like bundled

remote control including operating the “Live Mode” and “PC-LESS Presentation”.

(64)

Fig. 1.3. Web Remote Control

Download from Www.Somanuals.com. All Manuals Search And Download.

1. Main functions

1.4 PC-LESS Presentation

(Display the images stored in SD memory card/USB memory.)

The MIU enables “PC-LESS Presentation” by choosing PC-LESS function. (Fig.

1.4)

The PC-LESS function enables to display images that are stored in a storage

media like SD memory card or USB memory. The “PC-LESS Presentation” has 4

types of display modes.

1) Thumbnail Mode: Display thumbnails of stored images in the storage media.

(After this, “the storage media” is the general term for both of SD memory card

and USB memory.)

2) Full Screen Mode: Display selected image or movie on the full screen mode.

3) Slide Show Mode: Display images in the Slide show mode with certain interval.

4) Directory Tree View: Display ﬁles and folders that are stored in the storage

media as directory tree view.

[Supported storage media]

- SD memory card

- USB memory (USB memory type, USB hard disk and USB card

reader type)

NOTE • USB memory reader (adapter) is not supported (if the adapter

acknowledges as multiple devices connected).

• The supported formats are FAT 12, FAT 16(FAT) and FAT 32.

NTFS is not supported.

• USB hub is not supported.

Fig. 1.4 “PC-LESS Presentation” outlines

“PC-LESS Presentation” can be controlled via keypad on the projector or remote

control (102).

Download from Www.Somanuals.com. All Manuals Search And Download.

1. Main functions

1.4 PC-LESS Presentation

(Display the images stored in SD memory card/USB memory.) (continued)

NOTE • There are several naming limitations for the folders and ﬁles.

(1) Alphanumeric and Japanese characters are supported if the language

setting is Japanese.

(2) Alphanumeric and Latin-1 characters are supported if the language setting

is NOT Japanese.

• The ﬁles may not be able to access depending on the type of USB hard disk,

USB memory and USB card reader.

• It is recommended to use external power supply cable if the USB hard disk

drive has the power cable.

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Equipment connection and network setting

2.1 Required equipment preparation

The following equipments are required to connect the projector to your PC through

the network.

■ Common The projector: 1 unit, PC : 1 set *1

It is recommended to install the “Live Viewer 3” into the PC.

■ Depending on how you want to connect

1) For the wired connection

LAN cable (CAT-5 or greater): 1 piece

2) For the wireless connection *2

- Projector side

The Wireless Network Card (option : VA0833x *4) : 1 unit

- PC side

IEEE802.11b/g wireless LAN equipment: 1 unit *3

*1: For the PC, please refer to the item 3.2.1 Minimum PC hardware and software

requirement. (23)

*2: An access point is required when the wireless LAN connection is used as

Infrastructure mode.

*3: Depending on the type of wireless network device and PC you are using, the

projector may not be able to communicate properly with your PC, even if the

PC you are using is equipped with built-in wireless LAN function.

To eliminate communication problems, please use a Wi-Fi certiﬁed wireless

network device.

*4: For more information, please consult your dealer.

2.2 Quick connection

The “Live Viewer 3” supports very quick and simple connection to the network.

It is strongly recommended to install the “Live Viewer 3” into your PC to enjoy

the feature. Proceed to the installation of the “Live Viewer 3” (23) and the

connection. (26)

In case you don’t want to use the “Live Viewer 3” or you cannot use it by some

reason, proceed to the manual setting, the item 2.3 for the wired LAN (11) and

the item 2.4 for the wireless LAN. (16)

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Equipment connection and network setting

2.3 Manual network connection setting - Wired LAN -

If you don’t use the “Live Viewer 3”, you need to set up your network connection

manually.

This section explains how to set it up manually.

2.3.1 Equipments connection

Connect the projector and PC with a LAN cable.

* Before connecting with an existing network, contact the network administrator.

Next, please check the PC setting as explained below.

2.3.2 Network settings

This is the explanation of network connection settings for Windows XP and

Internet Explorer.

1) Log on to Windows XP as administrator authority. (*)

2) Open “Control Panel” from “Start” menu.

3) Open “Network and Internet Connections” in “Control Panel”. (Fig. 2.3.2.a)

* Administrator authority is the account, which can access to all functions.

Fig. 2.3.2.a “Network and Internet Connections” window

4) Open “Network Connections”. (Fig.2.3.2.b)

Fig. 2.3.2.b “Network Connections” window

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Equipment connection and network setting

2.3 Manual network connection setting - Wired LAN - (continued)

5) Open “Local Area Connection Properties” window you use for network device.

(Fig. 2.3.2.c)

Fig. 2.3.2.c “Local Area Connection Properties” window

6) Set used protocol as “TCP/IP” and open “Internet Protocol (TCP/IP) Properties”

window.

Fig. 2.3.2.d “Internet Protocol (TCP/IP) Properties” window

7) Set IP address, subnet mask and default gateway for PC.

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Equipment connection and network setting

2.3 Manual network connection setting - Wired LAN - (continued)

[About IP address]

■ Setting manually

The Network address portion included in the IP address set into your PC should

be common with projector’s one. And the entire IP address in the PC should not

be overlapped with other equipments in the same network, including the projector.

For example

The projector’s initial settings are as follows.

IP address: 192.168.1.10

Subnet mask: 255.255.255.0

(Network address: 192.168.1 in this case)

Therefore, specify PC’s IP address as follows.

IP address: 192.168.1.xxx (xxx shows decimal number.)

Subnet mask: 255.255.255.0

(Network address: 192.168.1 in this case)

Select from 1 to 254 for “xxx” not duplicating with any other equipments.

In this case, projector has “192.168.1.10” IP address, specify from 1 to 254

except 10 for PC.

NOTE • “0.0.0.0” cannot be set to the IP address.

• The projector’s IP address can be changed by using the conﬁguration utility

via a web browser. (65)

• If the projector and PC exist in the same network (i.e. network address is

common), default gateway can be blank.

• When the projector and PC exist in different networks, default gateway setting

is necessary. Contact the network administrator in detail.

■ Setting automatically

When DHCP server exists in network, it is possible to assign IP address to the

projector and PC automatically.

* DHCP is abbreviation for “Dynamic Host Conﬁguration Protocol” and has the

function to provide necessary setting for network like IP address from server to

client. A server that has DHCP function is called DHCP server.

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Equipment connection and network setting

2.3 Manual network connection setting - Wired LAN - (continued)

2.3.3 “Internet Option” setting

1) Click “Internet Options” in “Network and Internet Connections” window

(Fig. 2.3.3.a) to open “Internet Properties” window. (Fig.2.3.3.b)

Click

Fig. 2.3.3.a “Network and Internet Connections” window

Click

Fig. 2.3.3.b “Internet Properties” window

2) Click “Connections” tab and then click [LAN Settings] button to open “Local

Area Network (LAN) settings”. (Fig. 2.3.3.c)

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Equipment connection and network setting

2.3 Manual network connection setting - Wired LAN - (continued)

Fig. 2.3.3.c “Local Area Network (LAN) Settings” window

3) Uncheck all boxes in “Local Area Network (LAN) Settings” window. (Fig. 2.3.3.c)

2.3.4 Check connection

Check PC and projector are connected properly here. If it is not connected, check

cable connections and settings are properly or not.

1) Start browser in PC and specify following URL, then click “ ” button.

URL: http://(Projector IP address)/

For example, if projector IP address is 192.168.1.10, specify

URL: http://192.168.1.10/

2) If Fig. 2.3.4 appears, it succeeds.

Fig. 2.3.4 “Logon menu”

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Equipment connection and network setting

2.4 Manual network connection setting –Wireless LAN

The projector and PC can communicate in both of Ad-Hoc and Infrastructure

modes, using the designated wireless network card (option) on the projector.

This section is intended to explain how to set up wireless LAN connection

manually.

2.4.1 Preparation for wireless LAN connection

Fig. 2.4.1.a Without an access point communication (Ad-Hoc)

Fig. 2.4.1.b With an access point communication (Infrastructure)

* Ad-Hoc is one of the wireless LAN communication methods without having

access point to communicate.

* Infrastructure is one of the wireless LAN communication methods with having

access point to communicate. If certain quantities of equipments are used, this

mode is efﬁcient.

If communicating with existing network, contact your network administrator.

First, insert the wireless network card into SD card slot ( Using an SD card of

the User’s Manual (concise) ).

Then, make PC ready for wireless communication.

In case IEEE802.11b/g wireless LAN device is built-in the PC, make it valid and

make other network connections invalid. If wireless LAN device is not built-in the

PC, connect IEEE802.11b/g wireless LAN device and install device driver. (Refer

to the user guide for PC and wireless LAN device for detail.)

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Equipment connection and network setting

2.4 Manual network connection setting –Wireless LAN (continued)

2.4.2 Wireless LAN connection set up

Using wireless LAN utility for Windows XP standard.

Wireless LAN initial settings for the projector is as follows.

Connection Control

SSID

Channel

: Ad-Hoc

: wireless

: 1ch

Encryption rating

Communication speed

IP address

: None

: AUTO

: 192.168.1.10

* You can change these settings as you want via a web browser on your PC or the

menu on the projector. Refer to the item 4.1.3 Network Settings (69) or

 MIU menu in the User's Manual (detailed) – Operating Guide.

1) Open ”Network Connections”. (Fig. 2.4.2.a)

Fig. 2.4.2.a “Network Connections”

2) Open “Wireless Network Connection Properties”. (Fig. 2.4.2.b)

Fig. 2.4.2.b “Wireless Network Connection Properties” window (1)

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Equipment connection and network setting

2.4 Manual network connection setting –Wireless LAN (continued)

3) Set used protocol as “TCP/IP” and open TCP/IP property. Set IP address and

other settings as same as wired LAN connection set up. (12)

4) Open “Wireless Networks” tab. (Fig. 2.4.2.c)

Fig. 2.4.2.c “Wireless Network Connection Properties” window (2)

5) Add check mark for “Use Windows to conﬁgure my wireless network settings”

in “Wireless Network Connection Properties” window.

6) Click [Add] button in “Preferred networks” section in “Wireless Network

Connection Properties” window (Fig. 2.4.2.c) to open “Wireless network

properties” window. (Fig. 2.4.2.d)

Fig. 2.4.2.d “Wireless network properties” window

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Equipment connection and network setting

2.4 Manual network connection setting –Wireless LAN (continued)

7) Set each item as follows.

Network name (SSID): wireless

Data encryption: not enabled (Default setting is not enabled.)

NOTE • If the default setting in the projector is used, set the data as above

into your PC. If an access point is used or any encryption mode is used, it is

required to set the data that is matched to your system.

Refer to the manuals for your PC or wireless LAN adapter or access point.

• If you want to use the existing network via an access point, contact your

network administrator before the connection.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

The section is intended to explain the process to use the projector in the Live

Mode.

The outline of the process is as follows.

1) Install “Live Viewer 3” ( 23)



2) Quick Connection to the network ( 26)



The Quick Connection feature prepares some options to connect your

network. You can select one that meets your requirement.

- Passcode connection

- Proﬁle data connection

- History record connection

- My Connection

- Manual connection

3) Conﬁrm the connection to your destination ( 50)



In some case, there are several projectors connected to the same

network. Before you send your image, conﬁrm that the right projector is

selected.

4) Start the “Live Viewer 3” ( 54)



The “Live Viewer 3” main menu will be on screen.

Now, you can send your images to the projector through the network.

Fig. 3 “Live Viewer 3” Main menu

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.1 Outline of the Live Mode

The Live Mode can display PC’s image on screen in real time through either wired

or wireless LAN. So, no signal cable connection is required.

3.1.1 Display mode

In the Live Mode, there are two display modes, Single PC mode and Multi PC

mode.

1) Single PC mode

The projector displays images sent by one PC.

2) Multi PC mode

The projector screen is divided to 4 zones. The projector displays images in

one zone sent by a PC, so that the projector can displays images sent by up to

4 PCs at the same time.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.1 Outline of the Live Mode (continued)

3.1.2 Presenter mode

In the Single PC mode, the projector can be occupied by one PC and can block

an access from any other PC, if the Presenter mode is selected in the “Live

Viewer 3”.

While making your presentation, you don’t need to worry that the image on screen

is unexpectedly switched to an image sent by another PC.

The Presenter mode can be set on the Option menu in the “Live Viewer 3” main

menu. (58)

3.1.3 Display User Name

A "User Name" can be input in the “Live Viewer 3”, which is displayed on screen

by operating the menu on the projector. So, it can be found out whose image is

currently displayed on screen. (58)

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.2 Install “Live Viewer 3”

In order to use the Live Mode and Quick connection, you need to install the

enclosed software, the “Live Viewer 3”, into all PCs that you want to connect to

the projector through the network.

3.2.1 Minimum PC hardware and software requirement

• OS:

Windows 2000 Professional (Service Pack4)

Windows XP Home Edition

Windows XP Professional

Windows Vista Home Basic (32bit)

Windows Vista Home Premium (32bit)

Windows Vista Business (32bit)

Windows Vista Enterprise (32bit)

Windows Vista Ultimate (32bit)

• Graphic Interface:

• CPU:

• Display:

Video RAM 4MB or higher (8MB recommended)

Pentium III (600MHz or higher recommended)

VGA 640x480 or higher (XGA 1024x768 recommended)

65,536 simultaneous colors or higher

NOTE

• For Windows VISTA, use the latest “Live Viewer 3”. Please get the

latest version at Hitachi WEB site (http://hitachi.us/digitalmedia or http://www.

hitachidigitalmedia.com).

Since some functions maybe limited, please see the instruction manual that is

supplied with the latest “Live Viewer 3”.

• Set your PC’s resolution to XGA or less. Refer to the user manual for your PC

or Windows.

• In some cases, your PC’s screen will not be displayed correctly by the

projector. If the resolution is larger than 1024x768, the projector can display

only the 1024x768 portion of the image.

• Images might not been transmitted, caused by OS version or the driver

software for Network Adapter on your PCs. It is highly recommended that OS

and the driver should be updated to the latest.

• Memory:

64MB or higher (128MB or higher if using

Windows XP)

• Available Hard Disk Space:

• Web browser:

20MB or higher

Internet Explorer® (5.5 or higher)

• CD-ROM drive

• Wireless:

IEEE802.11b/g

NOTE • Depending on the type of wireless network device and PC you are

using, the projector may not be able to communicate properly with your PC,

even if the PC you are using is equipped with built-in wireless LAN functionality.

If the communication problems occur, please use a Wi-Fi certiﬁed wireless

network device.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.2 Install “Live Viewer 3” (continued)

3.2.2 Software Installation Procedure

1) Turn on the PC.

2) Shut down all applications.

3) Insert the accompanying CD-ROM into the PC's CD-ROM drive.

NOTE • After sequence 3, the User Account Control (UAC) dialog will appear

(if you are using Windows Vista). Please click [Allow] to continue installation.

4) After a moment, the Choose Setup Language

dialog will appear as shown on the right. Select

what you like to use in the list, and click [OK].

NOTE • If the Welcome dialog doesn't appear, proceed as follows:

(1) Click on the [Start] button on the toolbar and select the “Run”.

(2) Enter E:\software\setup.exe and then press [OK].

If your CD-ROM drive is not drive E on your PC, you will need to

replace E with the correct drive letter assigned to your CD-ROM drive.

If the software has been already installed, Uninstallation will be done. Click

[Cancel] button, then uninstallation will be canceled. If you uninstalled the

software by miss-operation, please re-install the software from ﬁrst procedure.

5) After a moment, the Welcome dialog will appear

as shown on the right. Press [Next].

6) The License Agreement dialog appears. If

you accept it, select “I accept the terms of the

license agreement” and press [Next].

7) The Choose Destination Location dialog

appears. Press [Next].

NOTE • The C:\Program Files\Projector Tools\

LiveViewer3 folder will be created and the

program will be installed into that folder. If you

wish to install to a different folder, click [Browse]

and select another folder.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.2 Install “Live Viewer 3” (continued)

8) Conﬁrm the program folder name. If “Projector

Tools” is okay, press [Next] to continue. If not,

enter the desired folder name and then press

[Next].

9) The Hardware Installation dialog appears.

Press Continue Anyway.

NOTE • After sequence 8, the Windows Security dialog will appear if you are

using Windows Vista. Please click the [Install this driver software anyway] and

continue installation.

10) After a moment, installation will complete

and the Setup Complete dialog will appear

as shown on the right. Click [Finish]. This

completes the software installation. Then your

PC automatically restarts.

(1) To conﬁrm that the software has been

properly installed, press [Start] button on

the toolbar, select All Programs and then

select the Projector Tools folder.

(2) The “LiveViewer3” will appear in that folder

if the installation was successful.

3.2.3 Version of the “Live Viewer ” software

To use the Live Mode, it is required to install the software, the “Live Viewer”, into

the PC that is going to be connected to the projector through the network.

The right software version is depended on the models that you have. If the version

is not matched with the projector, the software will not work properly.

Models

CP-X308

CP-X417

CP-X807

Live Viewer

Version

CP-X268A

CP-X608

CP-X267

CPX2

CP-X809W

™

2.01

2.1x

2.20

3.xx

• “x” in the version means 0 or greater.

Please check and get the latest version at Hitachi Web site.

http://hitachi.us/digitalmedia or http://www.hitachidigitalmedia.com

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.3 Quick connection to the network

The Live Mode prepares some options for the network connection. You can

choose one that meets to your system.

The explanation here is based on the case that Windows XP is installed in your

PC.

3.3.1 Starting the “Live Viewer 3”

Start the “Live Viewer 3” in your PC, taking one of the followings.

1) Double click the “Live Viewer 3” icon on the Desktop in your PC

2) Select “Start” → “All Programs” → “Projector Tools” → “Live Viewer 3” on

Windows XP menu.

Then, proceed to the item 3.3.2 Selecting the connection mode. (27)

[trouble shooting]

n In order to display the computer image correctly, you will need to change the

screen resolution.

If the resolution on your PC is set higher than XGA (1024x768), the screen is

displayed.

To change the resolution, click [Yes].

Not to change the resolution, click [No].

If you click [Yes], the resolution on your PC

is switched to XGA (1024x768).

If you click [No], the resolution is not

changed.

NOTE • When the resolution is changed, the arrangement of icons on PC

Desktop screen may be changed.

• Even if the resolution is changed, it will be back to the original when the “Live

Viewer 3“ is closed.

• If the resolution is not changed, the projector will display XGA(1024x768)

portion from top left corner of your PC screen.

• Refer to the user manual for your PC or Windows to change the resolution.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.3 Quick connection to the network (continued)

3.3.2 Selecting the network connection mode

After starting the “Live Viewer 3”, the “Select

the Network Connection” screen comes up.

Select the network connection that you would

like to use. There are 3 options in the menu.

• Wireless LAN

• Wired LAN

• My Connection

If you select either the wireless LAN or wired LAN, proceed to the Selecting

either the wireless LAN or wired LAN (below).

If you select the My Connection, jump to the Selecting the My Connection. (29)

Selecting either the wireless LAN or wired LAN

If you select either the wireless LAN or wired

LAN, a list of the network adapters in your PC

is shown in the menu.

Select what you like to use in the list, and click

[Next].

Then, proceed to the item 3.3.3 Connecting

to the network. (31)

NOTE • If you select the wireless LAN, the wireless LAN adapters in your PC

are shown in the list.

• If the wired LAN is selected, the wired LAN adapters in your PC are shown.

[trouble shooting]

n Are you sure that you want to turn on the network adapter?

The screen is displayed in the case that the

selected network adapter is invalid.

• To turn it on, click [Yes], and then proceed

to the item 3.3.3 (31).

• Not to turn it on, click [No], and then the

screen is back to the previous one to

select another network adapter. If no more

adapter in your PC, the “Live Viewer 3” will

be closed.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.3 Quick connection to the network (continued)

n A network connection was not established.

The screen is displayed in the case that the

projector is not connected with a LAN cable

to your PC when the wired LAN is selected.

Be sure that the projector is connected with

a LAN cable to your PC.

Click [OK], then the screen is back to the previous one to select the network

connection mode.

n Windows ﬁrewall is enabled(On).

The screen is displayed in the case that

the ﬁrewall setting in Windows XP/Vista is

activated, and the “Live Viewer 3“ is blocked

by the ﬁrewall.

• To turn it disabled(Off), click [Yes].

• Not to turn it disabled(Off), click [No],

but the projector may not be able to

communicate with your PC through the

network.

• If you put a check mark in the [Allow communication with LiveView3 by

adding it to the Exceptions list] box, the “Live Viewer 3” will never be

blocked by Windows ﬁrewall.

Proceed to the item 3.3.3 Connecting to the network. (31)

NOTE • If you click [Yes], the network access by the “Live Viewer 3” is

temporally permitted by Windows ﬁrewall, until the “Live Viewer 3” is closed.

• If any application software having the ﬁrewall function is installed into you PC,

make the ﬁrewall function invalid with following the user’s manual.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.3 Quick connection to the network (continued)

Selecting the My Connection

Select [My Connection] and click [Connect].

If you select the My Connection, the PC

is connected to the projector through the

network by using the proﬁle data that is pre-

assigned to My Connection. (62)

When you select the My Connection, the

PC immediately starts the connection to the

projector.

Proceed to the item 3.6 Conﬁrm the connection to your destination. (50)

NOTE • If the DHCP is set on in the projector, the network connection

between the projector and PC may not be established since IP address may be

varied. If you like to use the My Connection, set the DHCP off in the projector.

• If no proﬁle data is assigned to the My Connection, it can’t be used.

[trouble shooting]

n A network connection could not be established.

Windows prevented network conﬁguration

changes.

You may log in the Windows under User

authority.

Click [OK] to return to the screen to select

the network connection mode. (27)

Consult to the network administrator and log in again under the Administrator

authority. After that, please resume at the item 3.3.1 Starting the “Live Viewer

3”. (26)

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.3 Quick connection to the network (continued)

n Are you sure you want to connect the selected projector?

The message is appeared when the

wireless adapter you selected is already

used for another network connection.

• To connect, click [Yes]. Proceed to the

3.6 Conﬁrm the connection to your

destination. (50)

• Not to connect, click [No] to return to the

screen to select the network connection

mode. (27)

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.3 Quick connection to the network (continued)

3.3.3 Connecting to the network

There are some options to connect to the

network.

• Enter PassCode

• Conﬁgure Manually

• Select From List

Select one of them to meet your requirement.

Enter PassCode

If you want to use the Passcode for network connection, select [Enter PassCode]

and click [Next].

The Passcode is given by the projector on screen. And you simply input the

Passcode to the “Live Viewer 3” to connect the network.

Proceed to the 3.4 Passcode connection. (32)

Conﬁgure Manually

Select [Conﬁgure Manually] and click [Next].

Then, there are 3 options on the manual connection method.

• Proﬁle Proceed to the 3.5.1 Proﬁle connection (41)

You just select one of the stored proﬁle data to connect the network.

• History Proceed to the item 3.5.2 History connection (42)

Once connecting to the network, the “Live Viewer 3” stores the history.

If you need the same connection again, select [History].

Then, all you need to do is to select one of the history data from the list.

• Conﬁgure Network Settings Manually Proceed to the item

3.5.3 Conﬁguring manually (43)

If you need to make the setting manually, select [Conﬁgure Network

Settings Manually].

Select From List

Before selecting this item, your PC and the projectors need to be connected to the

same network.

If the connection is already established, select [Select From List].

From the list of the projectors connected to the network, select which projector

you would like to send your images. Proceed to the 3.6 Conﬁrm the connection

to your destination. (50)

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.4 Passcode connection

The unique Passcode system brings you very quick and simple connection to the

network.

The Passcode is a code that expresses the network setting in the projector. If you

input the code in the “Live Viewer 3” in your PC, the network setting in the projector

and PC can be matched and the connection will be established immediately.

The section is intended to explain how to use the Passcode.

3.4.1 Getting the Passcode

The Passcode is 12-digit code consisting of alphanumeric characters (“1-9” and

“A-Z”).

Example: PASSCODE 1234-5678-9ABC

The Passcode is given on the projector screen.

NOTE • The Passcode system does not work under the condition below. If

your system meets one of them, set the connection manually.

1) Any encryption code is used.

The Passcode system does not work with an encryption code.

2) Unique SSID is used.

The Passcode system accepts the factory default SSID only.

Factory default SSID 1 : wireless

Factory default SSID 2 : WLANProjector1

Factory default SSID 3 : WLANProjector2

Factory default SSID 4 : WLANProjector3

3) Subnet mask is not Class A or B or C.

The Passcode system accepts Class A, B and C only.

Class A:(255.0.0.0), ClassB:(255.255.0.0), Class C:(255.255.255.0)

There are two methods to get the Passcode from the projector

Method 1

1) Turn on the projector, and make sure that the projector image is on screen.

2) Press the RGB button on the remote control or INPUT button on the projector

to select the MIU as input port.

If there is no signal on the MIU port you can ﬁnd the Passcode on screen,

otherwise proceed to 3) below.

3) Press the MENU button on the remote control or the ▲/▼/◄/► buttons on

the projector to show the menu on screen.

4) Use the ▲/▼ cursor buttons to select the Advanced Menu, and use the ►

cursor button to enter the item.

5) Use the ▲/▼ cursor buttons to select the MIU, and use the ► cursor button

to enter the item.

6) Use the ▲/▼ cursor buttons to select the LIVE MODE, and push the ►

cursor button.

7) The Passcode is appeared on the screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.4 Passcode connection (continued)

Method 2

1) Turn on the projector, and make sure that the projector image is on screen.

2) Press the MENU button on the remote control or the ▲/▼/◄/► buttons on

the projector to show the menu on screen.

3) Use the ▲/▼ cursor buttons to select the Advanced Menu, and use the ►

cursor button to enter the item.

4) Use the ▲/▼ cursor buttons to select the MIU, and use the ► cursor button

to enter the item.

5) Use the ▲/▼ cursor buttons to select the INFORMATION, and use the ►

cursor button to display the INFORMATION.

6) The Passcode is appeared at the top right corner in the INFORMATION

window.

NOTE • Take the Method 2 , when you use the projector in the LIVE MODE

or PC-LESS Presentation mode, or when the MIU is not selected as the input

signal.

•

If no communication between the projector and PC in 5 minutes, the Passcode

will be changed.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.4 Passcode connection (continued)

3.4.2 Entering the Passcode

If you select [Enter PassCode] at the item

3.3.3, the “Please enter the PassCode” screen

is displayed. Please enter the Passcode

divided 4-digit each in 3 boxes (total 12-digit).

Example PASSCODE: 1234 - 5678 - 9ABC

After entering the Passcode, click [Connect] to start the connection to the

projector.

Proceed to the item 3.6 Conﬁrm the connection to your destination. (50)

If you click [Back], the screen is back to the item 3.3.3 Connecting to the

network. (31)

NOTE • When entering the Passcode, capital and small letters are not

distinguished.

• If you are using any encryption code or your unique SSID or Subnet mask

excluding ClassA and B and C, it is required to set the connection manually.

If the manual setting screen is displayed, please follow the item 3.4.3.

[trouble shooting]

n Incorrect PassCode.

The incorrect Passcode was input.

Click [Back] to return to the “Please enter

the PassCode” screen.

Check the PassCode on the projector

screen (32) and enter the code again.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.4 Passcode connection (continued)

n A network connection could not be established.

Windows prevented network conﬁguration

changes.

You may log in the Windows under User

authority.

Click [OK], then the “Live Viewer 3” main

menu is displayed even though the network

is not established. Click

on the main and

go back to the item 3.3.3 Connecting to the

network. (31)

Consult to the network administrator. Log in the Windows under Administrator

authority. After that, please resume at the item 3.3.1 Starting the “Live Viewer

3”. (26)

n Automatic connection failed.

The reason is that the IP address set in the

projector is the global address.

Following the instruction by the network

administrator, set the IP address and Subnet

mask in the “Live Viewer 3”.

After input these address, click [Connect].

If you want to erase the information you input, click [Reset].

NOTE • If the IP address you input to the PC is the same as the one set in the

projector, a warning message will come up. Please choose an IP address that

is currently not in use.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.4 Passcode connection (continued)

n A Network Conﬁguration Conﬂict exists.

The message comes up when the network

connection mode you set in the PC does not

match with the mode of the projector.

Please verify your network conﬁguration

setting on the projector and PC.

Click [Exit], then the “Live Viewer 3” main

menu is displayed even though the network

is not established. Click

on the main menu

to go back to the item 3.3.3 Connecting to

the network. (31)

n Are you sure you want to connect the selected projector?

The message is appeared when the wireless

adapter you selected is already used for

another network connection.

• To connect, click [Yes]. Proceed to the

3.6 Conﬁrm the connection to your

destination. (50)

• Not to connect, click [No] then the “Live

Viewer 3” main menu is displayed even

though the network is not established. Click

on the main menu to go back to the item

3.3.3 Connecting to the network. (31)

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.4 Passcode connection (continued)

3.4.3 Conﬁguring manually

After you input the Passcode (34), you are required to input the network setting

manually if you use any encryption code or your unique SSID or Subnet mask

except Class A/B/C. (32)

If you use the wired LAN, go to (40).

Wireless LAN

The required information depends on how you connect the projector and PC.

• Direct connection between the projector and PC (AdHoc mode)

• The projector connected to an access point by a LAN cable

• The projector connected to an access point by the wireless LAN

Direct connection between the projector and PC (AdHoc mode)

1) Enter the following information that is set in the projector. *1

SSID *2: wireless (example)

Encryption: WEP64bit (example)

Encryption key *3:

Subnet mask *4: 255.255.255.128

(example)

**********

(example)

2) Click [Connect].

3) The wireless connection will be established.

Proceed to the item 3.6 Conﬁrm the

connection to your destination. (50)

*1 To ﬁnd the network setting on the projector, refer to the NOTE. (40)

*2 If you don’t use the factory default SSID, you need to set your SSID by either

entering manually or selecting from the list of detected SSID.

*3 If you use an encryption, you need to set it. Contact the network administrator

to ﬁnd the encryption key that is set in the projector.

The encryption key is always shown as “

*4 If you use Subnet mask except Class A/B/C, please set it.

”.

**********

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.4 Passcode connection (continued)

The projector connected to an access point by a LAN cable

1) The setting on the access point. *1

Enter the following information.

SSID : WirelessAccessPoint (example)

Encryption: WEP64bit (example)

Encryption key *2:

(example)

**********

2) The setting on the projector. *3

Enter the following information.

Subnet mask *4: 255.255.255.128

(example)

3) Click [Connect].

4) The wireless connection will be established.

Proceed to the item 3.6 Conﬁrm the connection to your destination. (50)

*1 Contact the network administrator to ﬁnd out the setting on the access point.

*2 If you use an encryption, you need to set it. Contact the network administrator

to check the encryption key that is set in the projector.

The encryption key is always shown as “

*3 To ﬁnd the network setting on the projector, refer to the NOTE. (40)

”.

**********

*4 If you use Subnet mask except Class A/B/C, please set it.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.4 Passcode connection (continued)

The projector connected to an access point by the wireless LAN

1) Enter the following information that is set in

the projector. *1

SSID *2: wireless (example)

Encryption: WEP64bit (example)

Encryption key *3:

Subnet mask *4: 255.255.255.128

(example)

**********

(example)

2) Click [Connect].

3) The wireless connection will be established.

Proceed to the item 3.6 Conﬁrm the connection to your destination. (50)

*1 To ﬁnd the network setting on the projector, refer to the NOTE. (40)

*2 If you don’t use the factory default SSID, you need to set your SSID by either

entering manually or selecting from the list of detected SSID.

*3 If you use an encryption, you need to set it. Contact the network administrator

to ﬁnd the encryption key that is set in the projector.

The encryption key is always shown as “

*4 If you use Subnet mask except Class A/B/C, please set it.

”.

**********

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.4 Passcode connection (continued)

Wired LAN

1) Enter the following information for the

projector.

Subnet mask *1: 255.255.255.128

(example)

2) Click [Connect].

3) The network connection will be established.

Proceed to the item 3.6 Conﬁrm the

connection to your destination. (50)

*1 In case the case you use the Subnet mask except Class A/B/C, the screen is

appeared. Please set the Subnet mask.

NOTE • If you require the network setting information on the projector, take

the following procedure to ﬁnd it out.

1) Turn on the projector, and make sure that the projector image is on screen.

2) Press the MENU button on the remote control or the ▲/▼/◄/► buttons on

the projector to show the menu on screen.

3) Use the ▲/▼ cursor buttons to select the Advanced Menu, and use the ►

cursor button to enter the item.

4) Use the ▲/▼ cursor buttons to select the MIU, and use the ► cursor button

to enter the item.

5) Use the ▲/▼ cursor buttons to select the INFORMATION, and push the ►

cursor button.

6) The setting will be displayed in the MIU-INFORMATION-box.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.5 Manual conﬁguration

There are 3 options for the manual

conﬁguration.

• Proﬁle (below)

• History (42)

• Conﬁgure Network Settings Manually (43)

3.5.1 Proﬁle connection

Selecting a proﬁle data connect the network

with the projector.

It is required to store the proﬁle data in

advance. (60)

1) Select [Proﬁle].

2) Choose a proﬁle data listed in the window.

3) Click [Connect].

4) The network connection will be established.

Proceed to the item 3.6 Conﬁrm the

connection to your destination. (50)

NOTE • To check the setting in a proﬁle data, follow the process below.

1) Choose a proﬁle data that you want to check.

2) Move the mouse cursor to the proﬁle data, and click the right button on the

mouse to display a pop-up menu.

3) Select the “Property” in the pop-up menu, and click the left button on the

mouse.

4) The setting information of the selected proﬁle data is shown.

• If the DHCP is set on in the projector, the network connection between the

projector and PC may not be established since IP address may be varied. If

you like to use the Proﬁle connection, set the DHCP off in the projector.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.5 Manual conﬁguration (continued)

3.5.2 History connection

The “Live Viewer 3” can memory the network

settings when connecting to the projector as

a history record. After that, selecting a history

record can quickly connect the network with the

projector.

1) Select [History].

2) Choose a history record listed in the window.

3) Click [Connect].

4) The network connection will be established.

Proceed to the item 3.6 Conﬁrm the connection to your destination. (50)

If you want to copy a history record to a proﬁle data, select one of the history

record and click [Register to proﬁle]. The proﬁle data cannot be erased

automatically.

NOTE • The number of the history record is maximum 10 for each network

adapter. When the 11th data is stored, the oldest record among the 10 will be

overwritten.

• The data & time information in each history record is renewed when the

network is connected by using the history record.

• If the DHCP is set on in the projector, the network connection between the

projector and PC may not be established since IP address may be varied.

• Even if you use the proﬁle connection, it will be memorized as a history

record.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.5 Manual conﬁguration (continued)

3.5.3 Conﬁguring manually

All setting for the network connection between

the projector and PC is input manually.

Select [Conﬁgure Network Settings

Manually].

The information to be input manually is different, depending on how you want to

connect the projector and PC.

Wireless LAN

The required information depends on how you connect the projector and PC.

• Direct connection between the projector and PC (AdHoc mode). (44)

• The projector connected to an access point by a LAN cable. (45)

• The projector connected to an access point by the wireless LAN. (46)

Wired LAN

If you use the wired LAN, go to (47).

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.5 Manual conﬁguration (continued)

Direct connection between the projector and PC (AdHoc mode)

1) Enter the following information that is set in the projector. *1

SSID: wireless (example)

Encryption: WEP64bit (example)

Encryption key *2:

Mode: AD-HOC

(example)

**********

2) Click [Next].

3) Enter the following information that is set in

the projector. *1

IP address : 192.168.1.10 (example)

Subnet mask: 255.255.255.0 (example)

4) Click [Connect].

5) The wireless connection will be established.

Proceed to the item 3.6 Conﬁrm the connection to your destination. (50)

*1 To ﬁnd the network setting on the projector, refer to the NOTE. (40)

*2 If you use an encryption, you need to set it. Contact the network administrator

to ﬁnd the encryption key that is set in the projector.

The encryption key is always shown as “

”.

**********

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.5 Manual conﬁguration (continued)

The projector connected to an access point by a LAN cable

1) The setting on the access point. *1

Enter the following information.

SSID: WirelessAccessPoint (example)

Encryption: WEP64bit (example)

Encryption key *2:

**********

Mode: INFRASTRUCTURE

(example)

2) Click [Next].

3) Enter the following information that is set in

the projector. *3

IP address : 192.168.1.10 (example)

Subnet mask: 255.255.255.0 (example)

4) Click [Connect].

5) The wireless connection will be established.

Proceed to the item 3.6 Conﬁrm the connection to your destination. (50)

*1 Contact the network administrator to ﬁnd out the setting on the access point.

*2 If you use an encryption, you need to set it. Contact the network administrator

to check the encryption key that is set in the projector.

The encryption key is always shown as “

*3 To ﬁnd the network setting on the projector, refer to the NOTE. (40)

”.

**********

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.5 Manual conﬁguration (continued)

The projector connected to an access point by the wireless LAN

1) The setting on the access point. *1

Enter the following information.

SSID: WirelessAccessPoint (example)

Encryption: WEP64bit (example)

Encryption key *2:

**********

Mode: INFRASTRUCTURE

(example)

2) Click [Next].

3) Enter the following information that is set in

the projector. *3

IP address : 192.168.1.10 (example)

Subnet mask: 255.255.255.0 (example)

4) Click [Connect].

5) The wireless connection will be established.

Proceed to the item 3.6 Conﬁrm the connection to your destination. (50)

*1 Contact the network administrator to ﬁnd out the setting on the access point.

*2 If you use an encryption, you need to set it. Contact the network administrator

to check the encryption key that is set in the projector.

The encryption key is always shown as “

*3 To ﬁnd the network setting on the projector, refer to the NOTE. (40)

”.

**********

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.5 Manual conﬁguration (continued)

Wired LAN

1) Enter the following information for the

projector. *1

IP address : 192.168.1.10 (example)

Subnet mask : 255.255.255.0 (example)

2) Click [Connect].

3) The network connection will be established.

Proceed to the item 3.6 Conﬁrm the connection to your destination. (50)

*1 To ﬁnd the network setting on the projector, refer to the NOTE. (40)

[trouble shooting]

n A network connection could not be established.

Windows prevented network conﬁguration

changes.

You may log in the Windows under User

authority.

Click [OK], then the “Live Viewer 3” main

menu is displayed even though the network

is not established. Click

on the main menu

and go back to the item 3.3.3 Connecting to

the network. (31)

Consult to the network administrator. Log in the Windows under Administrator

authority. After that, please resume at the item 3.3.1 Starting the “Live Viewer

3”. (26)

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.5 Manual conﬁguration (continued)

n Automatic connection failed.

The reason is that the IP address set in the

projector is the global address.

Following the instruction by the network

administrator, set the IP address and Subnet

mask in the “Live Viewer 3”.

After input these address, click [Connect].

If you want to erase the information you input, click [Reset].

NOTE • If the IP address you input to the PC is the same as the one set in the

projector, a warning message will come up. Please choose an IP address that

is currently not in use.

n A Network Conﬁguration Conﬂict exists.

The message comes up when the network

connection mode you set in the PC does not

match with the mode of the projector.

Please verify your network conﬁguration

setting on the projector and PC.

Click [Exit], then the “Live Viewer 3” main

menu is displayed even though the network

is not established. Click

on the main menu

to go back to the item 3.3.3 Connecting to

the network. (31)

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.5 Manual conﬁguration (continued)

n Are you sure you want to connect the selected projector?

The message is appeared when the wireless

adapter you selected is already used for

another network connection.

• To connect, click [Yes]. Proceed to the

3.6 Conﬁrm the connection to your

destination. (50)

• Not to connect, click [No] then the “Live

Viewer 3” main menu is displayed even

though the network is not established.

Click

on the main menu to go back

to the item 3.3.3 Connecting to the

network. (31)

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.6 Conﬁrm the connection to your destination

3.6.1 Connection and transmission

When the network connection is established,

the “Connection to Projector successful” screen

is displayed.

Make sure that the right projector that you want

to send your image to is selected, by checking

the projector name and IP address shown in

the screen.

• To send images to the projector, click [Yes]. The transmission will be started.

It is required to set the MIU as an input port and select the Live Mode in the

MIU menu in the projector, to display the transmitted images.

Refer to the item 3.6.3 Setting the Live Mode. (53)

• Not to send, click [No], then the “Live Viewer 3” main menu is displayed

in stand-by mode. (The stand-by mode is the condition that the wireless

connection is established, but the images are not transmitted.)

The transmission can be started, if you click

3” main menu.

button on the “Live Viewer

If you wish to use the current connection setting as a proﬁle data for My

Connection, check in the box for [Register this setting to My Connection].

[trouble shooting]

n This projector is currently in use (Presenting) by another user.

The projector you want to send your images

to is occupied by another computer in the

Presenter mode.

Click [OK], then the “Live Viewer 3” main

menu is displayed in stand-by mode. Retry

to send your images, after the Presenter

mode is off.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.6 Conﬁrm the connection to your destination (continued)

A Slideshow is currently running on the projector that you are trying to display to.

The projector you want to send your images

to is in the Slide show mode in the PC-LESS

Presentation.

• Click [Yes], then the projector is switched

from the Slide show mode to the Live

Mode.

• Click [No], then the projector is remained

in the Slide show mode, and the “Live

Viewer 3” main menu is displayed in

stand-by mode on your PC.

n Are you sure you want to switch to Live Mode?

The projector is not set to the Live Mode.

• Click [Yes], then the projector is switched

to the Live Mode.

• Click [No], then the projector is remained

as it is, and the “Live Viewer 3” main

menu is displayed in stand-by mode on

your PC.

n Are you sure you want to change the input channel of the Projector to MIU?

The projector is not set to the MIU as an

input signal.

• Click [Yes], then the projector is switched

to the MIU.

• Click [No], then the projector is remained

as it is, and the “Live Viewer 3” main

menu is displayed in stand-by mode on

your PC.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.6 Conﬁrm the connection to your destination (continued)

3.6.2 Connection error

When the connection to the projector could not

be established, an error message, “Network

Connection not established”, will come up.

Click [OK] then the “Live Viewer 3” main menu

is displayed even though the network is not

established. Click

on the main menu to

go back to the item 3.3.3 Connecting to the

network. (31)

NOTE • If you selected the My Connection, the “Live Viewer 3” is closed.

Check the network setting in the projector, and retry the connection from the

item 3.3 Quick connection to the network. (26)

[trouble shooting]

n The network connection is refused.

The Projector has already reached the

maximum number of Network Connections.

The projector can connect up to 5 PCs at the

same time.

Click [OK], then the “Live Viewer 3” main

menu is displayed even though the network

is not established.

After disconnecting a PC, please retry to

connect to the network.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.6 Conﬁrm the connection to your destination (continued)

3.6.3 Setting the Live Mode

This section is intended to explain how to switch to the Live Mode in the MIU on

the projector, by using the remote control or a web browser software.

From Web Remote Control on a web browser

1) Click [LIVE MODE] button.

(Refer to the item 4.1.11 Remote Control (86))

From the OSD menu, by using the remote control or keypad on the projector.

1) Turn on the projector, and make sure that the projector image is on screen.

2) Press the MENU button on the remote control or the ▲/▼/◄/► buttons on

the projector to show the menu on screen.

3) Use the ▲/▼ cursor buttons to select the Advanced Menu, and use the ►

cursor button or ENTER button to enter the item.

4) Use the ▲/▼ cursor buttons to select the MIU, and use the ► cursor button

or ENTER button.

5) Use the ▲/▼ cursor buttons to select the LIVE MODE, and push the ►

cursor button or ENTER button.

(Refer to  MIU menu in the User’s Manual (detailed) – Operating Guide)

From MY BUTTON function

1) Turn on the projector, and make sure that the projector image is on screen.

2) Press the MENU button on the remote control or the ▲/▼/◄/► buttons on

the projector to show the menu on screen.

3) Use the ▲/▼ cursor buttons to select the Advanced Menu, and use the ►

cursor button or ENTER button to enter the item.

4) Use the ▲/▼ cursor buttons to select the OPTION, and use the ► cursor

button or ENTER button.

5) Use the ▲/▼ cursor buttons to select the MY BUTTON item, and use the ►

cursor button or ENTER button to enter the item.

6) Choose 1 or 2 on the MY BUTTON item using the ◄/► cursor buttons. Then

using the ▲/▼ buttons sets LIVE MODE function to the button.

(Refer to  OPTION menu in the User’s Manual (detailed) – Operating

Guide)

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.7 Start the “Live Viewer 3”

When you get the connection between your projector and PC, the “Live Viewer 3”

main menu will be shown on the PC screen.

On the main menu you can conﬁgure the settings and operate the functions to

send your images to the projector in the Live Mode.

3.7.1 Main menu and Operating buttons

1) Menu Type

There are 2 type of the main menu, Easy type and Advanced type, which can

be switched on screen.

• When the “Live Viewer 3” is started, the last used type will be screen.

• When the network connection is not established, the Advanced type will be on

screen.

Easy Type

Advanced Type

Status Display

Switch to

Easy type

Switch to Advanced type

Indicator

Fig. 3.7.1 a Live Viewer 3 Main menu

2) Operating buttons

q Starting Capture button

The transmission to the projector is started and the images will be displayed

in the Live Mode.

The Display mode will be the Single PC mode at ﬁrst. After that, the last

Display mode will be applied.

w Stop button

The image transmission is stopped.

NOTE • The images may not be displayed on screen, if the Start/Stop buttons

are clicked repeatedly.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.7 Start the “Live Viewer 3” (continued)

e Hold button

The image on screen is temporally frozen.

The last image before the button is clicked is remained on screen.

You can revise the image data on your PC without showing it on the

projector’s screen.

r Display mode button (57)

The button switches the Single PC mode and Multi PC mode.

t Connect button

The screen to select the connection mode is displayed.

Go to the item 3.3.3 (31)

y Option button

The option screen is displayed.

u Information button

The version of the “Live Viewer 3” is displayed.

i, o Close button

The network is disconnected and the “Live Viewer 3” is closed.

a Minimize button

The main menu is closed, and the “Live Viewer 3” icon is displayed on the

task tray in your PC. If the icon is double-clicked, the last type of the main

menu will be shown on screen.

Connected

Disconnected

Not connected

Hold

Fig. 3.7.1 b Task tray Icon

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.7 Start the “Live Viewer 3” (continued)

3.7.2 Displaying the status

1) Indicator

The indicator shows the following status.

Indicator

Status

Note

The network connection to the projector is

not established yet.

Not connected

The network connection is established, but

the image transmissions on hold.

Hold

The network connection is established and

the images on the PC are being sent to the

projector.

Connected

Disconnected

The network connection to the projector is

disconnected.

2) Status Display in Multi PC mode

The icon is displayed at the right end of the Display mode buttons.

One of the following icons to inform which quarter screens are used will be

shown.

Status

Status icon

No PC is on screen

One PC is on screen.

Two PCs are on screen.

Three PCs are on screen.

Four PCs are on screen.

NOTE • The status display is refreshed in every 3 seconds.

• If the status cannot be gotten from the projector, it will not be displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.7 Start the “Live Viewer 3” (continued)

3.7.3 Switching the display mode

The “Live Viewer 3” has the Single PC mode and Multi PC mode. The modes can

be switched on the main menu.

1) Click the

button on the main menu.

The buttons below are displayed.

2) Select from q to t buttons, and click it.

q Switching to the Single PC mode : Your image is displayed on full screen.

w-t Switching to the Multi PC mode : Your image is displayed on a quarter

screen identiﬁed in the button.

3) The projector screen is switched to the mode selected above, and the

transmission of your PC image will be started to display your image on the

screen.

4) The icon

on the main menu is replaced by the icon you selected.

NOTE • The image transmission will be stopped, when you click the Single

mode button while the projector is in the Single PC mode or you click one of the

Multi mode buttons that shows the quarter screen which is currently displaying

your PC images in the Multi PC mode.

• If the Multi PC mode is selected, the projector screen is automatically divided

to 4 zones.

• If the Presenter mode is set on in the PC whose image is currently on screen

in the Single PC mode, the

button cannot be clicked on other PCs.

• If the quarter screen that displays images sent from another PC is selected,

the network to the PC is disconnected.

(Refer to  MIU menu in the User’s Manual (detailed) – Operating Guide for

the function on the projector.)

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.7 Start the “Live Viewer 3” (continued)

3.7.4 Option menu

Clicking the Option button displays the option menu on screen.

q Optimize Performance

The “Live Viewer 3” captures PC screen in JPEG data and sends the JPEG

data to the projector. The “Live Viewer 3” has two options that have different

compression rate of JPEG data.

Transmission speed

Speed takes priority over Image quality.

It makes JPEG compression rate higher.

The screen on the projector is rewritten quicker because the

transferred data is smaller, but the image quality is worse.

Image quality

Image quality takes priority over Speed.

It makes JPEG compression rate lower.

The screen on the projector is rewritten slower because the

transferred data is larger, but the image quality is better.

w Cursor Emulation

If a mouse cursor (pointer) on your PC screen is not displayed on the

projector screen, check in the box. The “Live Viewer3” helps you to ﬁnd the

cursor on the screen. If the cursor is on the projector screen, not check it.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.7 Start the “Live Viewer 3” (continued)

e Presenter Mode

In the Single PC mode, the projector can be occupied by one PC and can

block an access from any other PC, if the Presenter mode is selected in the

“Live Viewer 3”.

While making your presentation, you don’t need to worry that the image on

screen is unexpectedly switched to an image sent by another PC.

If you want to turn it on, put a check mark in the check box.

NOTE • If the Multi PC mode is selected, the setting for the Presenter mode is

invalid.

• When switching from the Multi PC mode to the Single PC mode, the Presenter

mode setting of the PC is valid.

• The Presenter Mode is set valid in factory default setting.

r Display User Name

A "User Name" that is up to 20 letters can be input by using alphanumeric

characters.

The user name can be displayed on the projector screen, so you can ﬁnd out

whose image is currently on the screen.

(Refer to  MIU menu in the User’s Manual (detailed) – Operating

Guide)

If the check box is not marked, the information is not sent to the projector.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.8 Proﬁle data

3.8.1 Outline of Proﬁle data

The network setting to connect the projector and PC can be stored as a proﬁle

data. Once the data is stored, all you need to do is to select the data to connect to

the network. It is recommended when the same network connection is often used.

3.8.2 Making Proﬁle data

The proﬁle data is made on the Manual

Conﬁguration screen. (41)

Up to 10 proﬁle data can be stored for each

network adapter.

1) Select [Proﬁle] and click [New].

2) The “Create new proﬁle” will come up.

If you have already made 10 proﬁle data,

you cannot make a new one, until you delete

a stored data.

Input all information required for your

network connection.

If you want to clear the information you input,

click [Clear].

3) Click [OK], after all information is set.

If you don’t want to store it, click [Cancel].

4) The new proﬁle data is shown in the proﬁle list, if you click [OK].

NOTE • When you make a new proﬁle data, it is strongly recommended to

check that the new dada can work properly by selecting the data at the Proﬁle

connection. (41)

• If you change a wireless network adapter on the projector or PC, make a new

proﬁle data for the adapter.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.8 Proﬁle data (continued)

3.8.3 Editing Proﬁle data

If necessary, the proﬁle data can be edited on

the Manual Conﬁguration screen. (41)

1) Select [Proﬁle], and select one of the data

listed in the window.

2) Click [Edit].

3) The “Edit proﬁle” screen will come up.

4) Edit the information required to be revised.

If you want to clear all information in the

window, click [Clear].

5) Click [OK], after the editing is completed.

If you don’t want to store it, click [Cancel].

6) The edited proﬁle data is stored and shown in the proﬁle list with the new date

created information, if you click [OK].

NOTE • When you edit a proﬁle data, it is strongly recommended to check

that the edited data can work properly by selecting the data at the Proﬁle

connection. (41)

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.8 Proﬁle data (continued)

3.8.4 Registering My Connection

One of the proﬁle data, which is often used, can be registered as the My

Connection proﬁle data. Once the data is registered, all you need to do is to select

the My Connection to connect to the network. (29)

1) Click [My Connection].

2) The “Add My Connection” screen will come

up.

The currently selected proﬁle data for the My

Connection is shown with a check mark in

the list.

3) Select one of the proﬁle data listed in the

window and put a mark in the check box.

The data selected before is turned

unmarked.

4) Click [OK], then the window is closed.

If you don’t want to select a new one, click

[Cancel].

NOTE • If you don’t want to use the My Connection, mark no data listed in the

window, and click [OK].

• In the list, all proﬁle data are shown no matter which network adapter is

selected. You can register a proﬁle data that is not for currently selected

network adapter as the My Connection proﬁle data.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Using the Live Mode

3.8 Proﬁle data (continued)

Also, you can register a proﬁle data to My

Connection, when the network connection

is established. When it is established, the

“Connection to Projector successful” screen is

displayed. (50)

If you wish to use the current connection

setting for My Connection, check in the box for

[Register this setting to My Connection].

And then, if it is okay to overwrite the present

data for My Connection, click [OK].

A new proﬁle data will be created and it is

registered as My Connection proﬁle data.

NOTE • If there are already 10 proﬁle data, the check box cannot be checked.

Please erase one of the existing proﬁle data.

• The proﬁle name for the stored data is assigned by the “Live Viewer 3”

automatically. The name will be shown at the right side of the check box.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

This projector is equipped with the following network functions by using a web

browser software.

Conﬁ guring and controlling the projector via a web browser

You can change the settings of or control the projector via a network by using a

web browser from a PC that is connected to the same network.

(67)

E-mail Alerts

The projector can automatically send an alert to speciﬁed e-mail addresses when

the projector requires maintenance or has encountered an error.

(90)

Projector Management using SNMP

This projector is SNMP (Simple Network Management Protocol) compliant,

allowing you to monitor it from a remote location using SNMP software. In

addition, the projector is able to send failure & warning alerts to a speciﬁed PC.

(92)

Event Scheduling

You can schedule the projector to perform various functions according to the date

and time.

(93)

MY IMAGE (Still Image Transfer) Display

The projector can display still images that are transferred via the network.

(96)

Command Control via the Network

The projector can be controlled using RS-232C commands over a network.

(97)

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.1 Conﬁguring and controlling the projector via a web

browser

You can adjust or control the projector via a network from a web browser on a PC

that is connected to the same network.

NOTE • Internet Explorer 5.5 or later is required.

• If JavaScript is disabled in your web browser conﬁguration, you must enable

JavaScript in order to use the projector web pages properly. See the Help ﬁles

for your web browser for details on how to enable JavaScript.

• It is recommended that all web browser updates are installed. It is especially

recommended that all users running Internet Explorer on a Microsoft Windows

version prior to Windows XP Service Pack 2 install security update Q832894

(MS04-004) or the web browser interface may not be displayed correctly.

And when using an earlier version of Internet Explorer, during operations the

browser will log out after 50 seconds.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.1 Conﬁguring and controlling the projector via a web browser (Continued)

When conﬁguring or controlling the projector via a web browser, an ID and

password are required. There are two types of IDs, Administrator ID and User ID.

The following chart describes the differences between Administrator and User IDs.

Item

Description

Administrator

User

Displays the projector’s current

network conﬁguration settings.

Network Information

√

Displays and conﬁgures network

settings.

Network Settings

Port Settings

√

N/A

Displays and conﬁgures

communication port settings.

Displays and conﬁgures e-mail

addressing settings.

Mail Settings

Displays and conﬁgures failure &

warning alerts.

Alert Settings

Displays and conﬁgures schedule

settings.

Schedule Settings

Date/Time Settings

Security Settings

Displays and conﬁgures the date and

time settings.

Displays and conﬁgures passwords

and other security settings.

Projector Control

Remote Control

Controls the projector.

√

Controls the projector like IR remote.

Displays and conﬁgures the current

projector status.

Projector Status

Network Restart

√

Restarts the projector’s network

connection.

N/A

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.1 Conﬁguring and controlling the projector via a web browser (Continued)

4.1.1 Logon

Refer to the following for conﬁguring or controlling the projector via a web browser.

Example: If the IP address of the projector is set to 192.168.1.10:

1) Enter “http://192.168.1.10/” into the address

bar of the web browser and press “Enter”

key or click “ ” button. The screen in Fig.

4.1.1a will be displayed.

2) Enter your ID and password and click

[Logon].

Fig. 4.1.1 a “Logon menu”

Below are the factory default settings for administrator ID, user ID and passwords.

Item

Administrator

User

Password

<blank>

Administrator

User

<blank>

If the logon is successful, either the Fig. 4.1.1 b or Fig. 4.1.1 c screen will be

displayed.

Main menu

Fig. 4.1.1 b “Logon with Administrator ID”

Fig. 4.1.1 c “Logon with User ID”

3) Click the desired operation or conﬁguration item on the main menu located on

the left-hand side of the screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.1 Conﬁguring and controlling the projector via a web browser (Continued)

4.1.2 Network Information

All screen drawings in this manual are shown

when you logon with the Administrator ID.

Any functions that are available only for the

Administrator will not be shown when you logon

with the User ID. Refer to the table. (66, 67)

Displays the projector’s current network conﬁguration settings.

Item

Projector Name

DHCP

Description

Displays the projector name settings.

Displays the DHCP conﬁguration settings.

Displays the current IP address.

Displays the subnet mask.

IP Address

Subnet Mask

Default Gateway

MAC Ethernet

Displays the default gateway.

Displays the ethernet MAC address.

Displays the wireless LAN MAC address.

NOTE • MAC wireless will not be displayed when

the NETWORK MODE is set to the WIRED even if

the wireless network card is mounted. (MIU menu

in the User’s Manual (detailed)) – Operating

Guide)

MAC Wireless

Displays the network ﬁrmware time stamp. This information

is only displayed when logged on using an Administrator ID.

Firmware Date

Displays the network ﬁrmware version number. This

information is only displayed when logged on using an

Administrator ID.

Firmware Version

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.1 Conﬁguring and controlling the projector via a web browser (Continued)

4.1.3 Network Settings

Displays and conﬁgures network settings.

Item

Network Mode

IP Conﬁguration

DHCP ON

Description

Select Network mode “Wired” or “Wireless”.

Conﬁgures network settings.

Enables DHCP.

DHCP OFF

Disables DHCP.

IP Address

Conﬁgures the IP address when DHCP is disabled.

Conﬁgures the subnet mask when DHCP is disabled.

Conﬁgures the default gateway when DHCP is disabled.

Subnet Mask

Default Gateway

Conﬁgures the name of the projector.

The length of the Projector Name can be up to 64

alphanumeric characters. Only alphabets, numbers and

following symbols can be used. !"#$%&'()*+,-./:;<=>?@[\]^_`{

|}~ and space

Projector Name

Conﬁgures the location to be referred to when using SNMP.

The length of the sysLocation can be up to 255 alphanumeric

characters. Only numbers ‘0-9’ and alphabet ‘a-z’, ‘A-Z’ can

be used.

sysLocation (SNMP)

Conﬁgures the contact information to be referred to when

using SNMP.

The length of the sysContact can be up to 255 alphanumeric

characters. Only numbers ‘0-9’ and alphabet ‘a-z’, ‘A-Z’ can

be used.

sysContact (SNMP)

DNS Server Address

Conﬁgures the DNS server address.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.1 Conﬁguring and controlling the projector via a web browser (Continued)

Item

Description

Select “AD-HOC” or “Infrastructure”.

Select using channel between “1” and “11”.

Wireless Mode

NOTE • Depending on the country where you are

the channels may vary. In addition, depending on

the country or region where you are may be required

to use a wireless network card that conﬁrm to the

standards in the respective country or region.

(Communication

channel)

Speed

(Communication speed)

Select communication speed.

Select data encryption method.

Encryption

Input WEP key, which has same length deﬁned by WEP.

When “64bit” or “128bit” is selected, input 10 characters or

26 characters respectively. Only numbers from “0” to “9”

and alphabets from “a” to “f” (whichever small or capital

characters) can be used.

WEP Key

Enter the series of two characters pair. It will be cleared by 0,

if the total length is odd.

Input WPA Passphrase. Available number of input characters

is 8 to 63. Only alphabets, numbers and following symbols

can be used.

WPA Passphrase

!"#$%&'()*+,-./:;<=>?@ [\]^_`{|}~ and space

Select an SSID from the list. If you require to set your unique

SSID, select [Custom], then set your own SSID following the

rules below.

Maximum number of input characters is 32.

Only alphabets, numbers and following symbols can be used.

!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~ and space.

SSID

Click [Apply] button to save the settings.

NOTE • The new conﬁguration settings are activated after restarting the

network connection. When the conﬁguration settings are changed, you must

restart the network connection. You can restart the network connection by

clicking [Network Restart] on the main menu.

• If you connect the projector to an existing network, consult a network

administrator before setting server addresses.

• The WEP Key, WPA passphrase and SSID settings will not be set if the invalid

characters are used.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.1 Conﬁguring and controlling the projector via a web browser (Continued)

4.1.4 Port Settings

Displays and conﬁgures communication port settings.

Item

Description

Network Control Port1

(Port:23)

Conﬁgures command control port 1 (Port:23).

Click [Enable] check box to use port 23.

Port open

Click [Enable] check box when authentication is required for

this port.

Authentication

Network Control Port2

(Port:9715)

Conﬁgures command control port 2 (Port:9715).

Port open

Click [Enable] check box to use port 9715.

Click [Enable] check box when authentication is required for

this port.

Authentication

SNMP Port

Port open

Conﬁgures the SNMP port.

Click [Enable] check box to use SNMP.

Conﬁgures the destination of the SNMP Trap in IP format.

• The address allows not only IP address but also domain

name if the valid DNS server is setup in the Network

Settings. The maximum length of host or domain name is up

to 255 characters.

Trap address

SMTP Port

Port open

Conﬁgures the SMTP port.

Click [Enable] check box to use the e-mail function.

Click [Apply] button to save the settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.1 Conﬁguring and controlling the projector via a web browser (Continued)

4.1.5 Mail Settings

Displays and conﬁgures e-mail addressing settings.

Item

Description

Click [Enable] check box to use the e-mail function.

Conﬁgure the conditions for sending e-mail under the Alert

Settings.

Send mail

Conﬁgures the address of the mail server in IP format.

• The address allows not only IP address but also domain

SMTP Server IP Address name if the valid DNS server is setup in the Network

Settings. The maximum length of host or domain name is up

to 255 characters.

Conﬁgures the sender e-mail address.

The length of the sender e-mail address can be up to 255

Sender E-mail address

alphanumeric characters.

Conﬁgures the e-mail address of up to ﬁve recipients. You

can also specify [TO] or [CC] for each address. The length of

the recipient e-mail address can be up to 255 alphanumeric

characters.

Recipient E-mail address

Click [Apply] button to save the settings.

NOTE • You can conﬁrm whether the mail settings work correctly using [Send

Test Mail] button. Please enable Send mail setting before clicking [Send Test

Mail].

• If you connect the projector to an existing network, consult a network

administrator before setting server addresses.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.1 Conﬁguring and controlling the projector via a web browser (Continued)

4.1.6 Alert Settings

Displays and conﬁgures failure & alert settings.

Alert Item

Cover Error

Description

The lamp cover has not been properly ﬁxed.

The cooling fan is not operating.

Fan Error

The lamp does not light, and there is a possibility that interior

portion has become heated.

Lamp Error

There is a possibility that the interior portion has become

heated.

Temp Error

Air Flow Error

The internal temperature is rising.

Lamp Time Error

Lamp time over.

There is a possibility that the interior portion has become

overcooled.

Cold Error

Filter Error

Other Error

Filter time over.

Other error.

If displaying this error, please contact your dealer.

Schedule Execution

Error

Schedule Execution error. ( 75)



Lamp Time Alarm

Filter Time Alarm

Lamp time over Alarm Time setting.

Filter time over Alarm Time setting.

Transition Detector

Alarm

Transition Detector Alarm. ( OPTION menu in the User’s

Manual (detailed) – Operating Guide)



The power switch is turned on.

(Off → standby mode)

Cold Start

The SNMP access is detected from the invalid SNMP

community.

Authentication Failure

Refer to “Troubleshooting” in the User’s Manual (detailed) – Operating

Guide for further detailed explanation of Error except Other Error and Schedule

Execution Error.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.1 Conﬁguring and controlling the projector via a web browser (Continued)

The Alert Items are shown below.

Setting Item

Alarm Time

Description

Conﬁgures the time to alert.

(Only Lamp Time Alarm and Filter Time Alarm.)

SNMP Trap

Send Mail

Click [Enable] check box to enable SNMP Trap alerts.

Click [Enable] check box to enable e-mail alerts.

(Except Cold Start and Authentication Failure.)

Conﬁgures the subject line of the e-mail to be sent.

The length of the subject line can be up to 100 alphanumeric

characters.

Mail Subject

Mail Text

(Except Cold Start and Authentication Failure.)

Conﬁgures the text of the e-mail to be sent.

The length of the text can be up to 1024 alphanumeric

characters.

(Except Cold Start and Authentication Failure.)

Click [Apply] button to save the settings.

NOTE • The trigger of Filter Error e-mail is depending on the FILTER

MESSAGE setting in the SERVICE item of the OPTION menu which deﬁnes

the period until the ﬁlter message is displayed on the projector screen. The

e-mail will be sent when the ﬁlter timer exceeds 500, 1000, 1500 or 2000 hours

based on the conﬁguration. No notiﬁcation e-mail will be sent if the FILTER

MESSAGE is set to TURN OFF. (OPTION menu in the User’s Manual

(detailed) – Operating Guide)

• Lamp Time Alarm is deﬁned as a threshold for e-mail notiﬁcation (reminder)

of the lamp timer. When the lamp hour exceeds this threshold that is conﬁgured

through the Web page, the e-mail will be sent out.

• Filter Time Alarm is deﬁned as a threshold for e-mail notiﬁcation (reminder)

of the ﬁlter timer. When the ﬁlter hour exceeds this threshold, the e-mail will be

sent out.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.1 Conﬁguring and controlling the projector via a web browser (Continued)

4.1.7 Schedule Settings

Displays and conﬁgures schedule settings.

Item

Description

Conﬁgures the daily schedule.

Daily

Sunday

Monday

Tuesday

Conﬁgures the Sunday schedule.

Conﬁgures the Monday schedule.

Conﬁgures the Tuesday schedule.

Wednesday

Conﬁgures the Wednesday schedule.

Conﬁgures the Thursday schedule.

Thursday

Friday

Conﬁgures the Friday schedule.

Saturday

Conﬁgures the Saturday schedule.

Speciﬁc date No.1

Speciﬁc date No.2

Speciﬁc date No.3

Speciﬁc date No.4

Speciﬁc date No.5

Conﬁgures the speciﬁc date (No.1) schedule.

Conﬁgures the speciﬁc date (No.2) schedule.

Conﬁgures the speciﬁc date (No.3) schedule.

Conﬁgures the speciﬁc date (No.4) schedule.

Conﬁgures the speciﬁc date (No.5) schedule.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.1 Conﬁguring and controlling the projector via a web browser (Continued)

The schedule settings are shown below.

Item

Description

Schedule

Click [Enable] check box to enable the schedule.

Conﬁgures the month and date.

This item appears only when Speciﬁc date (No. 1-5) is

selected.

Date (Month/Day)

Click [Apply] button to save the settings.

The current event settings are displayed on the schedule list. To add additional

functions and events, set the following items.

Item

Description

Time

Conﬁgures the time to execute commands.

Command

[Parameter]

Conﬁgures the commands to be executed.

Power

Conﬁgures the parameters for power control.

Input Source

Display Image

Conﬁgures the parameters for input switching.

Conﬁgures the parameters for display of transfered image

data

(96)

Click [Register] button to add new commands to the schedule list.

Click [Delete] button to delete commands from the schedule list.

Click [Reset] button to delete all commands and reset the schedule settings from

the schedule list.

NOTE • After the projector is moved, check the date and time set for the

projector before conﬁguring the schedules. Strong shock may make the date

and time settings (77) get out of tune.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.1 Conﬁguring and controlling the projector via a web browser (Continued)

4.1.8 Date/Time Settings

Displays and conﬁgures the date and time settings.

Item

Current Date

Description

Conﬁgures the current date in year/month/day format.

Conﬁgures the current time in hour:minute:second format.

Current Time

Click [ON] check box to enable daylight savings time and set

the following items.

Daylight Savings Time

Start

Conﬁgures the date and time daylight savings time begins.

Conﬁgures the month daylight savings time begins (1~12).

Month

Conﬁgures the week of the month daylight savings time

begins (First, 2, 3, 4, Last).

Week

Conﬁgures the day of the week daylight savings time begins

(Sun, Mon, Tue, Wed, Thu, Fri, Sat).

Day

hour

Time

Conﬁgures the hour daylight savings time begins (0 ~ 23).

minute Conﬁgures the minute daylight savings time begins (0 ~ 59).

Conﬁgures the date and time daylight savings time ends.

Conﬁgures the month daylight savings time ends (1 ~ 12).

End

Month

Conﬁgures the week of the month daylight savings time ends

(First, 2, 3, 4, Last).

Week

Conﬁgures the day of the week daylight savings time ends

(Sun, Mon, Tue, Wed, Thu, Fri, Sat).

Day

hour

Conﬁgures the hour daylight savings time ends (0 ~ 23).

Time

minute Conﬁgures the minute daylight savings time ends (0 ~ 59).

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.1 Conﬁguring and controlling the projector via a web browser (Continued)

Item

Description

Conﬁgures the time difference. Set the same time difference

as the one set on your PC. If unsure, consult your IT

manager.

Time difference

Click the [ON] check box to retrieve Date and Time

information from the SNTP server and set the following items.

SNTP

Conﬁgures the SNTP server address in IP format.

• The address allows not only IP address but also domain

name if the valid DNS server is setup in the Network

Settings. The maximum length of host or domain name is up

to 255 characters.

SNTP Server IP

Address

Conﬁgures the interval at which to retrieve Date and Time

information from the SNTP server (hour:minute).

Cycle

Click [Apply] button to save the settings.

NOTE • If you connect the projector to an existing network, consult a network

administrator before setting server addresses.

• To enable the SNTP function, the time difference must be set.

• The projector will retrieve Date and Time information from the time server and

override time settings when SNTP is enabled.

• The internal clock’s time may not remain accurate. Using SNTP is

recommended to maintain accurate time.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.1 Conﬁguring and controlling the projector via a web browser (Continued)

4.1.9 Security Settings

Displays and conﬁgures passwords and other security settings.

Item

Description

Administrator authority Conﬁgures the Administrator ID and password.

Conﬁgures the Administrator ID.

The length of the text can be up to 32 alphanumeric

Administrator ID

characters.

Conﬁgures the Administrator password.

The length of the text can be up to 255 alphanumeric

characters.

Administrator

Password

Re-enter

Administrator

Password

Reenter the above password for veriﬁcation.

Conﬁgures the User ID and password.

User authority

Conﬁgures the User ID.

The length of the text can be up to 32 alphanumeric

characters.

User ID

Conﬁgures the User password.

The length of the text can be up to 255 alphanumeric

characters.

User Password

Re-enter User

Password

Reenter the above password for veriﬁcation.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.1 Conﬁguring and controlling the projector via a web browser (Continued)

Item

Description

Conﬁgures the Authentication password for the command

control.

Network Control

Authentication

Password

Conﬁgures the Authentication password. The length of the

text can be up to 32 alphanumeric characters.

Re-enter

Authentication

Password

Reenter the above password for veriﬁcation.

SNMP

Conﬁgures the community name if SNMP is used.

Conﬁgures the community name. The length of the text can

be up to 64 alphanumeric characters.

Community name

FTP

Conﬁgures the FTP user and password.

Conﬁgures the user name. The length of the text can be up

to 32 alphanumeric characters.

User

Conﬁgures the password. The length of the text can be up to

32 alphanumeric characters.

Password

Re-enter Password

Reenter the above password for veriﬁcation.

Click [Apply] button to save the settings.

NOTE • Only numbers ‘0-9’ and alphabet ‘a-z’, ‘A-Z’ can be used.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.1 Conﬁguring and controlling the projector via a web browser (Continued)

4.1.10 Projector Control

The items shown in the table below can be

performed using the Projector Control menu.

Select an item using the up and down arrow keys

on the PC.

Most of the items have a submenu. Refer to the

table below for details.

NOTE • The setting value may not match with the actual value if the user

changes the value manually. In that case, please refresh the page by clicking

[Refresh] button.

Controls the projector.

Item

Description

Main

Power

Turns the power on/off.

Selects the input source.

Input Source

Picture Mode

Blank On/Off

Mute

Selects the picture mode setting.

Turns Blank on/off.

Turns Mute on/off.

Freeze

Turns Freeze on/off.

Controls the magnify setting.

In some input signal sources, it might stop “Magnify” even

though it does not reach to maximum setting value.

Magnify

Picture

Brightness

Contrast

Adjusts the brightness setting.

Adjusts the contrast setting.

Selects the gamma setting.

Selects the color temperature setting.

Adjusts the color setting.

Gamma

Color Temp

Color

Tint

Adjusts the tint setting.

Sharpness

Active Iris

MyMemory Save

MyMemory Recall

Adjusts the sharpness setting.

Selects the active iris setting.

Saves the MyMemory data.

Recalls the MyMemory data.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.1 Conﬁguring and controlling the projector via a web browser (Continued)

Item

Description

Image

Aspect

Selects the aspect setting.

Over Scan

V Position

H Position

H Phase

Adjusts the over scan setting.

Adjusts the vertical position.

Adjusts the horizontal position.

Adjusts the horizontal phase.

Adjusts the horizontal size.

H Size

Auto Adjust Execute Performs the automatic adjustment.

Input

Progressive

Selects the progressive setting.

Video NR

3D-YCS

Selects the video noise reduction setting.

Selects the 3D-YCS setting.

Color Space

Component

C-Video Format

S-Video Format

HDMI

Selects the color space.

Selects the COMPONENT port setting.

Selects the video format setting.

Selects the s-video format setting.

Selects the HDMI setting.

Frame Lock-RGB1

Frame Lock-RGB2

Frame Lock-HDMI

RGB in-1

Turns the frame lock-RGB1 function on/off.

Turns the frame lock-RGB2 function on/off.

Turns the frame lock-HDMI function on/off.

Selects the RGB1 input signal type.

Selects the RGB2 input signal type.

RGB in-2

Setup

Auto Keystone

Execute

Performs the automatic keystone distortion setting.

Keystone V

Keystone H

Whisper

Adjusts the vertical keystone distortion setting.

Adjusts the horizontal keystone distortion setting.

Selects the whisper mode.

Mirror

Selects the mirror status.

Monitor Out-RGB1

Monitor Out-RGB2

Monitor Out-HDMI

Monitor Out-MIU

Assigns the RGB OUT when the RGB1 input port is selected.

Assigns the RGB OUT when the RGB2 input port is selected.

Assigns the RGB OUT when the HDMI input port is selected.

Assigns the RGB OUT when the MIU input port is selected.

Monitor Out-

Component

Assigns the RGB OUT when the COMPONENT input port is

selected.

Assigns the RGB OUT when the S-VIDEO input port is

selected.

Assigns the RGB OUT when the VIDEO input port is

selected.

Monitor Out-S-Video

Monitor Out-Video

Monitor Out-Standby Assigns the RGB OUT in the standby mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.1 Conﬁguring and controlling the projector via a web browser (Continued)

Item

Description

Adjusts the volume setting.

Audio

Volume

Treble

Adjust the Treble setting.

Bass

Adjusts the Bass setting.

SRS WOW

Selects the SRS WOW setting.

Speaker

Turns the built-in speaker on/off.

Assigns the AUDIO-RGB1 input port.

Assigns the AUDIO-RGB2 input port.

Assigns the AUDIO-HDMI input port.

Assigns the AUDIO-MIU input port.

Assigns the AUDIO-COMPONENT input port.

Assigns the AUDIO-S-VIDEO input port.

Assigns the AUDIO-VIDEO input port.

Assigns the AUDIO OUT in the standby mode.

Selects the HDMI audio setting.

Audio-RGB1

Audio-RGB2

Audio-HDMI

Audio-MIU

Audio-Component

Audio-S-Video

Audio-Video

Audio Out Standby

HDMI Audio

Screen

Language

Selects the language for the OSD.

Adjusts the vertical Menu position.

Adjusts the horizontal Menu position.

Selects the Blank mode.

Menu Position V

Menu Position H

Blank

Startup

Selects the startup screen mode.

Turns MyScreen lock function on/off.

Turns the message function on/off.

Selects the template setting.

MyScreen Lock

Message

Template

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.1 Conﬁguring and controlling the projector via a web browser (Continued)

Item

Description

Option

Auto Search

Auto Keystone

Auto on

Turns the automatic signal search function on/off.

Turns the automatic keystone distortion correction function

on/off.

Turns the auto on function on/off.

Conﬁgures the timer to shut off the projector when no signal

is detected.

Auto off

Assigns the functions for the MY BUTTON1 button on the

included remote control.

My Button-1

Assigns the functions for the MY BUTTON2 button on the

included remote control.

My Button-2

My Source

Selects the My Source setting.

Remote Receiv. Front Enable/Disable remote receiv. front.

Remote Receiv. Rear Enable/Disable remote receiv. rear.

Remote Receiv. Top

Enable/Disable remote receiv. top.

Remote Freq. Normal Enables/Disables the remote control signal frequency normal.

Remote Freq. High

Closed Caption

Display

Enables/Disables the remote control signal frequency high.

Selects Closed Caption DISPLAY setting.

Selects Closed Caption MODE setting.

Selects Closed Caption CHANNEL setting.

Mode

Channel

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.1 Conﬁguring and controlling the projector via a web browser (Continued)

The Service item in the Projector Control

menu is shown only when you logon with the

Administrator ID.

The items shown in the table below can be

performed using the Projector Control menu.

Click [Quit Presenter Mode].

Item

Description

Service

Quit Presenter Mode Quit compulsorily from the Presenter mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.1 Conﬁguring and controlling the projector via a web browser (Continued)

4.1.11 Remote Control

You can use your Web browser to control the

projector.

• Do not attempt to control the projector with

the projector’s remote control and via your Web

browser at the same time. It may cause some

operational errors in the projector.

The functions on the bundled remote control are assigned to the Web Remote

Control screen.

Item

Description

POWER

RGB

Assigned the same operation as STANDBY/ON button.

Assigned the same operation as RGB button.

Assigned the same operation as VIDEO button.

Assigned the same operation as BLANK button.

Assigned the same operation as FREEZE button.

Assigned the same operation as MUTE button.

Assigned the same operation as MENU button.

Assigned the same operation as ▲ button.

Assigned the same operation as ▼ button.

Assigned the same operation as ◄ button.

Assigned the same operation as ► button.

Assigned the same operation as ENTER button.

Assigned the same operation as RESET button.

Assigned the same operation as PAGE UP button.

Assigned the same operation as PAGE DOWN button.

VIDEO

BLANK

FREEZE

MUTE

DOWN

LEFT

RIGHT

ENTER

RESET

PAGE UP

PAGE DOWN

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.1 Conﬁguring and controlling the projector via a web browser (Continued)

The functions on PC-LESS PRESENTATION menu are assigned to the Web

Remote Control screen.

Item

LIVE MODE

Description

Selecting this item sets the projector onto the “Live Mode”.

Selecting this item sets the projector onto the “Thumbnail

mode”.

THUMBNAIL

SLIDE SHOW

DIRECTORY

Selecting this item sets the projector onto the “Slide Show

mode”.

Selecting this item sets the projector onto the “Directory

mode”.

NOTE • The Web Remote Control does not support repeat function that

performs an action while holding a button clicked down.

• Since the repeat function is not available, click the button repeatedly as many

times as you require.

• Even if you hold the button clicked down for a while, the Web Remote Control

sends your request command one time only. Release the button, then click it

again.

• When [POWER] button is pushed, a message window comes up to conﬁrm

the operation. If you wish to turn it off, push [OK], otherwise push [Cancel].

• [PAGE DOWN] and [PAGE UP] buttons on the Web Remote Control cannot

be used as mouse emulation function of the projector.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.1 Conﬁguring and controlling the projector via a web browser (Continued)

4.1.12 Projector Status

Displays and conﬁgures the current projector status.

Item

Error Status

Description

Displays the current error status

Lamp Time

Filter Time

Power Status

Input Status

Blank On/Off

Mute

Displays the usage time for the current lamp.

Displays the usage time for the current ﬁlter.

Displays the current power status.

Displays the current input signal source.

Displays the current Blank on/off status.

Displays the current Mute on/off status.

Displays the current Freeze status.

Freeze

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.1 Conﬁguring and controlling the projector via a web browser (Continued)

4.1.13 Network Restart

Restarts the projector’s network connection.

Item

Description

Restarts the projector’s network connection in order to

activate new conﬁguration settings.

Restart

NOTE • Restarting requires you to re-log on in order to further control or

conﬁgure the projector via a web browser. Wait 10 seconds or more after

clicking [Restart] button to log on again.

• The Logon menu (67) is displayed after restarting the projector’s network

connection if the DHCP is set to ON.

4.1.14 Logoff

When [Logoff] is clicked, the Logon menu is displayed (67).

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.2 E-mail Alerts

The projector can automatically send an alert message to the speciﬁed e-mail

addresses when the projector detects a certain condition that is requiring

maintenance or detected an error.

NOTE • Up to ﬁve e-mail addresses can be speciﬁed.

• The projector may be not able to send e-mail if the projector suddenly loses

power.

Mail Settings ( 72)



To use the projector’s e-mail alert function, please conﬁgure the following items

through a web browser.

Example: If the IP address of the projector is set to 192.168.1.10:

1) Enter “http://192.168.1.10/” into the address bar of the web browser.

2) Enter the Administrator ID and password and click [Logon].

3) Click [Port Settings] on the main menu.

4) Click [Enable] check box to open the SMTP Port.

5) Click [Apply] button to save the settings.

6) Click [Mail Settings] and conﬁgure each item. Refer to the item 4.1.5 Mail

Settings (72) for further information.

7) Click [Apply] button to save the settings.

NOTE • Click [Send Test Mail] button in [Mail Settings] to conﬁrm that the

e-mail settings are correct. The following mail will be delivered to the speciﬁed

addresses.

Subject line :Test Mail

Text

:Send Test Mail

Date

Time

IP Address

MAC Address <Projector MAC address>

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.2 E-mail Alerts (Continued)

8) Click [Alert Settings] on the main menu to conﬁgure the E-mail Alerts settings.

9) Select and conﬁgure each alert item. Refer to the item 4.1.6 Alert Setting (73)

for further information.

10) Click [Apply] button to save the settings.

Failure/Warning e-mails are formatted as follows:

Subject line : <Mail title>

Text

: <Mail text>

Date

Time

IP Address

MAC Address <Projector MAC address>

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.3 Projector Management using SNMP

The SNMP (Simple Network Management Protocol) enables to manage the

projector information, which is a failure or warning status, from the computer on

the network. The SNMP management software will be required on the computer

to use this function.

NOTE • It is recommended that SNMP functions be carried out by a network

administrator.

• SNMP management software must be installed on the computer to monitor

the projector via SNMP.

SNMP Settings ( 71)



Conﬁgure the following items via a web browser to use SNMP.

Example: If the IP address of the projector is set to 192.168.1.10:

1) Enter “http://192.168.1.10/” into the address bar of the web browser.

2) Enter the Administrator ID and Password and click [Logon].

3) Click [Port Settings] on the main menu.

4) Click [Enable] check box to open the SNMP Port. Set the IP address to send

the SNMP trap to when a Failure/Warning occurs.

5) Click [Security Settings] on the main menu.

6) Click [SNMP] and set the community name on the screen that is displayed.

7) Conﬁgure the settings for Trap transmission of Failures/Warnings. Click

[Alert Settings] on the main menu and select the Failure/Warning item to be

conﬁgured.

8) Click [Enable] check box to send out the SNMP trap for Failures/Warnings.

Clear [Enable] check box when SNMP trap transmission is not required.

9) Click [Apply] button to save the settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.4 Event Scheduling

The scheduling function enables to setup scheduled events including power on /

power off. It enables to be “self-management” projector.

NOTE • You can schedule the following control events: Power ON/OFF, Input

Source and Transferred Image Display.

• The power on / off event has the lowest priority among the all events that are

deﬁned at the same time.

• There are 3 types of Scheduling, 1) daily 2) weekly 3) speciﬁc date. (75)

• The priority for scheduled events is as follows 1) speciﬁc date 2) weekly 3)

daily.

• Up to ﬁve speciﬁc dates are available for scheduled events. Priority is given to

those with the lower numbers when more than one event has been scheduled

for the same date and time (e.g., ‘Speciﬁc day No. 1’ has priority over ‘Speciﬁc

day No. 2’ and so on.

• Be sure to set the date and time before enabling scheduled events. (77)

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.4 Event Scheduling (Continued)

Schedule Settings ( 75)



Schedule settings can be conﬁgured from a web browser.

Example: If the IP address of the projector is set to 192.168.1.10:

1) Enter “http://192.168.1.10/” into the address bar of the web browser.

2) Enter the Administrator ID and password and click [Logon].

3) Click [Schedule Settings] on the main menu and select the required schedule

item. For example, if you want to perform the command every Sunday, please

select [Sunday].

4) Click [Enable] check box to enable scheduling.

5) Enter the date (month/day) for speciﬁc date scheduling.

6) Click [Apply] button to save the settings.

7) After conﬁgure the time, command and parameters, click [Register] to add the

new event.

8) Click [Delete] button when you want to delete a schedule.

There are three types of scheduling.

1) Daily: Perform the speciﬁed operation at a speciﬁed time every day.

2) Sunday ~ Saturday: Perform the speciﬁed operation at the speciﬁed time on a

speciﬁed day of the week.

3) Speciﬁc date: Perform the speciﬁed operation on the speciﬁed date and time.

NOTE • In Standby mode the power indicator will ﬂash green for approx. 3

seconds when at least 1 “Power ON” schedule is saved.

• When the schedule function is used, the power cord must be connected to

the projector and the outlet and the power switch must be turned on, [ | ]. The

schedule function does not work when the power switch is turned off, [O] or

the breaker in a room is tripped. The power indicator will lights orange or green

when the projector gets is receiving the power.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.4 Event Scheduling (Continued)

Date/Time Settings ( 77)



The Date/Time setting can be adjusted via a web browser.

Example: If the IP address of the projector is set to 192.168.1.10:

1) Enter “http://192.168.1.10/” into the address bar of the web browser.

2) Enter the Administrator ID and Password and click [Logon].

3) Click [Date/Time Settings] on the main menu and conﬁgure each item. Refer

to the item 4.1.8 Data/Time Settings for further information.

4) Click [Apply] button to save the settings.

NOTE • The battery for the built in clock may be dead if the clock loses time

even when the date and time have been set correctly. Replace the battery by

following the instructions on replacing the battery.

(Internal clock battery in the User’s Manual (concise))

• The internal clock’s time may not remain accurate. Using SNTP is

recommended to maintain accurate time.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.5 MY IMAGE (Still Image Transfer) Display

The projector can display a still image in an SD memory card or USB memory that

is transferred via the network. (Fig. 4.5)

Transfer image ﬁle

USB memory

SD memory card

Display image ﬁle (

)

Fig. 4.5 Still Image Transfer

MY IMAGE transmission requires an exclusive application for your PC. You can

download it from the Hitachi web site (http://hitachi.us/digitalmedia or http://www.

hitachidigitalmedia.com). Refer to the manual for the application for instructions.

To display the transferred image, select the MY IMAGE item in the MIU menu. For

more information, please see the description of the MY IMAGE item of the MIU

menu. ( MIU menu in User’s Manual (detailed) – Operating Guide)

NOTE • Supported ﬁle types are JPEG, Bitmap and PNG.

• It is possible to allocate the image ﬁle up to 4 in the maximum.

• The image ﬁle also can be displayed by using schedule function from the web

browser. Refer to the item 4.4 Event Scheduling (93) in detail.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.6 Command Control via the Network

You can conﬁgure and control the projector via the network using RS-232C

commands.

Communication Port

The following two ports are assigned for the command control.

TCP #23

TCP #9715

Command Control Settings ( 71)



Conﬁgure the following items from a web browser when command control is used.

Example: If the IP address of the projector is set to 192.168.1.10:

1) Enter “http://192.168.1.10/” into the address bar of the web browser.

2) Enter the Administrator ID and password and click [Logon].

3) Click [Port Settings] on the main menu.

4) Click [Enable] check box to open Network Control Port1 (Port: 23) to

use TCP #23. Click [Enable] check box for [Authentication] setting when

authentication is required, otherwise clear the check box.

5) Click [Enable] check box to open Network Control Port2 (Port: 9715) to

use TCP #9715. Click [Enable] check box for [Authentication] setting when

authentication is required, otherwise clear the check box.

6) Click [Apply] button to save the settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.6 Command Control via the Network (Continued)

When the authentication setting is enabled, the following settings are required.

(79)

7) Click [Security Settings] on the main menu.

8) Click [Network Control] and enter the desired authentication password.

* See NOTE.

9) Click [Apply] button to save the settings.

NOTE • The Authentication Password will be the same for Network Control

Port1 (Port: 23), Network Control Port2 (Port: 9715).

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.6 Command Control via the Network (Continued)

Command Format

Command formats differ among the different communication ports.

● TCP #23

You can use the RS-232C commands without any changes. The reply data

format is the same as the RS-232C commands. However, the following reply

will be sent back in the event of authentication failure when authentication is

enabled.

Error code

0x04 0x00

0x1F

● TCP #9715

Send Data format

The following formatting is added to the header (0x02), Data length (0x0D),

Checksum (1byte) and Connection ID (1 byte) of the RS-232C commands.

Connection

Header

Data length

RS-232Ccommand

Check Sum

0x02

0x0D

13 bytes

1 byte

Header

Data length

→ 0x02, Fixed

→ RS-232C commands byte length (0x0D, Fixed)

RS-232C command → RS-232C commands that start with 0xBE 0xEF

(13 bytes)

Check Sum

→ This is the value to make zero on the addition of the

lower 8 bits from the header to the checksum.

→ Random value from 0 to 255 (This value is attached

to the reply data)

Connection ID

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.6 Command Control via the Network (Continued)

Reply Data format

The connection ID (the data is same as the connection ID data on the sending

data format) is attached to the RS-232C commands reply data.

Connection

0x06

1 byte

Connection

0x15

1 byte

Connection

0x1C

Error code

2 bytes

1 byte

Connection

0x1D

Data

2 bytes

1 byte

Connection

Status code

0x1F

2 bytes

1 byte

Authentication

Error code

Connection

0x1F

0x04 0x00

1 byte

100

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Management with Web browser software

4.6 Command Control via the Network (Continued)

Automatic Connection Break

The TCP connection will be automatically disconnected after there is no

communication for 30 seconds after being established.

Authentication

The projector does not accept commands without authentication success

when authentication is enabled. The projector uses a challenge response type

authentication with an MD5 (Message Digest 5) algorithm.

When the projector is using a LAN, a random 8 bytes will be returned if

authentication is enabled. Bind this received 8 bytes and the Authentication

Password and digest this data with the MD5 algorithm and add this in front of the

commands to send.

Following is a sample if the Authentication Password is set to “password” and the

random 8 bytes are “a572f60c”.

1) Select the projector.

2) Receive the random 8 bytes “a572f60c” from the projector.

3) Bind the random 8 bytes “a572f60c” and the Authentication Password

“password” and it becomes “a572f60cpassword”.

4) Digest this bind “a572f60cpassword” with MD5 algorithm.

It will be “e3d97429adffa11bce1f7275813d4bde”.

5) Add this “e3d97429adffa11bce1f7275813d4bde” in front of the commands

and send the data.

Send “e3d97429adffa11bce1f7275813d4bde”+command.

6) When the sending data is correct, the command will be performed and the

reply data will be returned. Otherwise, an authentication error will be returned.

NOTE • As for the transmission of the second or subsequent commands, the

authentication data can be omitted when the same connection.

101

Download from Www.Somanuals.com. All Manuals Search And Download.

5. PC-LESS Presentation

5.1 Outline of the PC-LESS Presentation

The PC-LESS Presentation reads image data from storage media inserted into

SD CARD slot or AUX I/O port and displays the image on the following modes.

The PC-LESS Presentation can be operated on the OSD menu in the projector

screen or via a web browser software in your PC connected to the projector

through the network.

The feature allows you to make your presentation without your PC.

- Thumbnail Mode (104)

- Full Screen Mode (108)

- Slide Show Mode (110)

- Directory Tree View (112)

Thumbnail

Mode

Full Screen

Mode

Slide Show

Mode

102

Download from Www.Somanuals.com. All Manuals Search And Download.

5. PC-LESS Presentation

5.1 Outline of the PC-LESS Presentation (continued)

Directory Tree

Mode

[Supported storage media]

• SD memory card

• USB memory (USB memory type, USB hard disk and USB card reader type)

NOTE • USB memory reader (adapter) that has more than 1 USB slot is not

supported (if the adapter is acknowledged as multiple devices connected).

• USB hub is not supported.

• Security USB memory is not supported.

• Some SD memory cards and USB memories may not work correctly.

• SDHC (4GB etc) SD memory card is not supported. Up to 2GB card is

supported.

• SD memory and the wireless network card (option) cannot be inserted at the

same time.

• Be careful to insert and remove SD memory card and USB memory.

( Using a USB storage/Using an SD card in the User’s Manual (concise))

[Supported format]

• FAT12, FAT16 and FAT32

NOTE • NTFS is not supported.

[Supported ﬁle format]

• JPEG (.jpeg, .jpg) * Progressive is not supported.

• Bitmap (.bmp)

• PNG (.png)

* 16bit mode and compressed bitmap is not supported.

* Interlace PNG is not supported.

• MPEG4 (.mp4)

* Supported bit resolution rate is less than 1Mbps in

Simple Proﬁle.

Supported resolution is less than VGA.

Supported Audio format is only AAC.

103

Download from Www.Somanuals.com. All Manuals Search And Download.

5. PC-LESS Presentation

5.2 Thumbnail mode

The Thumbnail mode displays the images stored in an SD or USB storage media

in thumbnail screen. Maximum 12 images are displayed in a screen.

If you wish, you can jump into the Full Screen Mode or Slide Show mode, after

you select some images in the Thumbnail mode.

Thumbnail menu

Selected image

Thumbnail images

Fig. 5.2 Thumbnail Mode

5.2.1 Starting the Thumbnail mode

The Thumbnail mode can be started from the OSD menu in the projector or from

a web browser software on your PC.

from the OSD menu

1) Save JEPG or other supported ﬁles (103) into root directory in a SD or USB

storage media.

2) Insert the SD memory card into the SD card slot on the projector or the USB

memory into the AUX I/O port on the projector. ( Using a USB storage/

Using an SD card in the User’s Manual (concise))

3) Press the MENU button on the remote control or the ▲/▼/◄/► buttons on

the projector to show the menu on screen.

4) Use the ▲/▼ cursor buttons to select the Advanced Menu, and use the ►

cursor button to enter the item.

5) Use the ▲/▼ cursor buttons to select the MIU, and use the ► cursor button

to enter the item.

104

Download from Www.Somanuals.com. All Manuals Search And Download.

5. PC-LESS Presentation

5.2 Thumbnail mode (continued)

6) Use the ▲/▼ cursor buttons to select the PC-LESS PRESENTATION, and

push the ► cursor button.

7) Use the ▲/▼ cursor buttons to select the THUMBNAIL, and push the ►

cursor button to perform it. The picture in Fig. 5.2 will be on screen.

from a web browser software

1) Save JEPG or other supported ﬁles (103) into root directory in a SD or USB

storage media.

2) Insert the SD memory card into the SD card slot on the projector or the USB

memory into the AUX I/O port on the projector. ( Using a USB storage/

Using an SD card in the User’s Manual (concise))

3) Connect the projector and your PC through the network. (11 or 16 or

26)

4) Start a web browser software and logon to the projector. (67)

5) Select the Remote Control in the main menu to have the Remote Control

screen on your PC.

6) Select the THUMBNAIL and click

it. The picture in Fig. 5.2 will be on

screen.

105

Download from Www.Somanuals.com. All Manuals Search And Download.

5. PC-LESS Presentation

5.2 Thumbnail mode (continued)

5.2.2 Operating by buttons or keys

You can control the images in the thumbnail screen with the remote control or

keypad or a web browser software. The following functions can be supported

while the thumbnail is displayed.

Button operation

Functions

The keypad on

Web Remote in web

The remote

control

the projector

browser software.

▲/▼/◄/►

UP/DOWN/LEFT/RIGHT Move cursor

PAGE UP

PAGE DOWN

PAGE UP

Switches pages

PAGE DOWN

Displays selected image

on full screen

ENTER

INPUT

ENTER

Displays PC-LESS

PRESENTATION menu

* These operations are not accessible while the projector OSD menu is displayed.

NOTE • The Thumbnail mode shows 12 pictures in 1 page as maximum.

• It is not possible to change the input port by INPUT button when THUMBNAIL,

SLIDE SHOW, or DIRECTORY is displayed.

• Display the projector OSD menu before changing the input port.

• Some error Icons will be displayed in thumbnail.

This ﬁle seems to be broken or not supported format.

The ﬁle name exists in the playlist ﬁle (116), but the actual ﬁle does

not exist anywhere.

106

Download from Www.Somanuals.com. All Manuals Search And Download.

5. PC-LESS Presentation

5.2 Thumbnail mode (continued)

5.2.3 Operation on the Thumbnail menu

At the right side of the Thumbnail screen, you can ﬁnd the Thumbnail menu.

1) PC-LESS PRESENTATION MENU:

Move the cursor to the PC-LESS PRESENTATION

menu, and push the ► cursor button on the remote

control or projector, or [RIGHT] on the Web Remote

Control. The PC-LESS PRESENTATION menu will be

displayed.

2) REFLESH:

Move the cursor to the REFLESH, and push the ►

cursor button on the remote control or projector, or

[RIGHT] on the Web Remote Control. Then, the

warning message for the REFRESH will be displayed.

The Refresh is a function to initialize the playlist. (116)

If you initialize it, the thumbnail screen is renewed and

the images are back to the original condition.

To initialize it, push the ENTER on the remote control

or Web Remote Control, or INPUT on the projector.

To escape to the Thumbnail menu, push the ESC on

the remote control or the ◄ key on the projector or the

[LEFT] button on the Web Remote Control.

NOTE • If you initialize it, the setting for the Slide show and the rotation setting

for images will be initialized as well.

• If the storage media is protected, the playlist cannot be initialized.

• If the storage media does not have the space to store the new playlist ﬁle, the

playlist cannot be initialized.

• For other functions in the menu, refer to the Slide Show. (110)

107

Download from Www.Somanuals.com. All Manuals Search And Download.

5. PC-LESS Presentation

5.3 Full Screen Mode

The Full Screen Mode (Fig. 5.3) shows a full display image. To make full screen

display, press the ENTER button on remote control or the INPUT button on

Keypad or click [ENTER] button in the Web Remote Control when the image ﬁle

is selected on the Thumbnail Mode or Directory Tree View.

Full screen display

Fig. 5.3 Full Screen Mode

The following functions can be supported in the Full screen mode.

Button operation *1)

The keypad

on the

projector

Web Remote

in web browser

software.

Functions

The remote

control

•

Rotates image 90 degrees

clockwise or anticlockwise.

Once image is rotated, the angle

information is kept in the playlist even

though the mode is switched to other.

▲/▼ or

UP/DOWN or

◄/► *2)

LEFT/RIGHT *2) (Thumbnail or Slide Show Mode) To

return the original, rotate the image

back to the initial angle or erase the

playlist ﬁle in memory card. (116)

•

Moves the slide forward or backward

ENTER

INPUT

ENTER

(from Thumbnail Mode) Displays thumbnail.

Displays PC-LESS PRESENTATION menu.

*1) These operations are not accessible while the projector OSD menu is displayed.

*2) The function for the pair of keys is selected on the KEY CONFIG. menu (109)

NOTE • It is not possible to change the input port by INPUT button of keypad

when displaying the THUMBNAIL, SLIDE SHOW, or DIRECTORY.

• Display the projector OSD menu before changing the input port.

•

Image might not be displayed properly at the beginning or end of MP4 ﬁle playback.

108

Download from Www.Somanuals.com. All Manuals Search And Download.

5. PC-LESS Presentation

5.3 Full Screen Mode (continued)

You can display the image ﬁle with your desired size.

1) Select the DISPLAY SIZE in PC-LESS PRESENTATION menu.

2) Press the ENTER button on the remote

control or ► button on the Keypad or

RIGHT button on the Web Remote Control.

3) Then DISPLAY SIZE menu appears.

4) Select your desired DISPLAY SIZE.

• REAL : Displays the image at original size. Displays the image at the center of

screen if original size is smaller than the screen size.

Displays only center of the image if original size is larger than the screen

size.

• NORMAL : Displays the image for the maximum size on the screen, and keeps

original aspect.

• FULL : Displays the image at the full size screen. Original aspect will be changed

to full size display.

The animation ﬁle is always played at VGA mode if resolution is larger than VGA.

The animation ﬁle is always played at the center of screen if resolution is smaller

than VGA.

You can select the KEY conﬁguration from 2 preset pattern assigned to ▲/▼/◄/►

keys on Tumbnail Mode.

1) Select the KEY CONFIG. in PC-LESS PRESENTATION menu.

2) Press ► button.

3) The KEY CONFIG. menu appears.

Pattern A

Pattern B

4) Select the KEY CONFIG. pattern.

• pattern A : ◄ : previous image

▲ : rotation to right

• pattern B : ◄ : rotation to left

▲ : previous image

► : next image

▼ : rotation to left

► : rotation to right

▼ : next image

109

Download from Www.Somanuals.com. All Manuals Search And Download.

5. PC-LESS Presentation

5.4 Slide Show Mode

You can play the Slide show with the projector menu.

Select the SLIDE SHOW on PC-LESS PRESENTATION

menu and press the ENTER / ► button on the remote

control or ► button on Keypad. Then Slide show will start.

You can also play the Slide show by clicking [SLIDE

SHOW] button in the Web Remote Control.

The Slide Show Mode (Fig. 5.4) displays a full screen image and switches the images

at intervals set in the Display time. The Display time can be set by the Playlist (116)

and menu. (111)

Fig. 5.4 Slide Show Mode

The following operations can be accessible while the Slide show is displayed.

Button operation

The keypad

on the

projector

Web Remote

in web browser

software.

Functions

The remote

control

ENTER

INPUT

ENTER

Displays thumbnail.

Displays PC-LESS PRESENTATION

menu.

* These operations are not accessible while the projector OSD menu is displayed.

NOTE • It is impossible to change the input port by the INPUT button if the

THUMBNAIL, SLIDE SHOW, or DIRECTORY is displayed.

• Display the projector OSD menu before changing the input port .

• Images can be displayed when it is recorded in the playlist.

•

Image can not be displayed in the thumbnail if it is not recorded in the playlist. (116)

• When the SLIDE SHOW mode is set to ONE TIME, the last slide of the

presentation will be held on screen till the ENTER button on the remote control

or Web Remote Control, or INPUT button on the projector is pushed.

110

Download from Www.Somanuals.com. All Manuals Search And Download.

5. PC-LESS Presentation

5.4 Slide Show Mode (continued)

You can play the Slide show at your desired conﬁguration.

Conﬁgure the SLIDE SHOW items in THUMBNAIL.

1) START #

2) STOP #

: Set the beginning number of the Slide show.

: Set the end number of the Slide show.

3) INTERVAL : Set the interval time of the Slide show.

4) MODE

: Select the Slide show mode.

ONE TIME : Play the Slide show one time.

ENDLESS : Play the Slide show endless.

: Play the Slide show.

5) PLAY

It is not recommend to set the interval time

very short something like several seconds,

because it may take more than several

seconds to read and display an image ﬁle

if it is stored in very deep layer directory

or if so many ﬁles are stored in the same

directory.

NOTE • The settings of the Slide Show are saved to the “slidemode.txt”

ﬁle that is stored in the storage media. If the ﬁle is not existed, it is generated

automatically.

• The START #, STOP #, INTERVAL, and MODE are set by thumbnail menu

once, this setting has more priority than the Playlist.

• If the storage media is under the write protection or the “slidemode.txt” is

the read only type ﬁle, it is impossible to change the settings of the Slide Show.

• If you would like to release the priority, delete the “slidemode.txt” ﬁle from

directory.

111

Download from Www.Somanuals.com. All Manuals Search And Download.

5. PC-LESS Presentation

5.5 Directory Tree View

You can display the directory with the projector menu.

Select the DIRECTORY on the PC-LESS PRESENTATION

menu. And press the ENTER / ► button on the remote

control or ► button on Keypad. Then directory will be

displayed.

You can also display the directory by clicking [DIRECTORY] button in the Web

Remote Control.

The Directory Tree View (Fig. 5.5) displays all folders and ﬁles (includes un-

supported format ﬁle) in the memory card as a tree view.

The preview image is shown on the top left corner on the directory tree view. In

case of movie ﬁle, an initial ﬂame is displayed as preview. No preview is displayed

if a folder or un-supported format ﬁle is selected.

If the displayable ﬁle is selected and the ENTER button on remote control is

pressed, it turns into the full screen image.

If the directory is selected and the ENTER button on remote control is pressed, it

turns into the thumbnail view of selected folder.

You can also display the full screen image or the thumbnail view by clicking

[ENTER] button in the Web Remote Control.

Preview image

File information

Tree structure