Recold® JW Series Fluid Cooler
/
/
Engineering Data
Download from Www.Somanuals.com. All Manuals Search And Download.
Recold JW Series Fluid Cooler Construction
/
/
3
The JW Evaporative Fluid Cooler is a ruggedly built unit constructed to provide many years of durable,
dependable service with minimal maintenance requirements. Quality materials and workmanship are a key
factor in meeting this objective.
FAN MOTORS
DRIFT ELIMINATORS
Fan motors furnished as standard equipment are open
drip-proof type suitable for outdoor service. Motors
have a 1.15 service factor and are mounted on a
heavy duty adjustable base located for easy access.
Eliminators are constructed of PVC assemblies in
removable, easy to handle sections. Each section has
a three break design allowing three changes in air
flow and measure approximately 5 inches in depth.
The use of durable PVC eliminates the corrosion
problems associated with galvanized eliminators.
FAN GUARD SCREENS
All moving parts are protected with OSHA approved
galvanized steel screens. Each guard is easily
removed for access to the fan.
HEAT EXCHANGE COIL
Coil tube bundle is constructed of 5⁄8" copper
tubing with stainless steel tube sheets
and copper headers. The copper
construction offers a
FAN SECTION
The centrifugal fan is
forward curved, statically
and dynamically balanced
and constructed of
noncorrosive coil for extended
service life.
ACCESS DOORS
galvanized steel. The fan
housing has curved inlet
rings for efficient air entry
and discharge into the
pan. Fans are mounted
on a solid steel shaft
Large rectangular access
doors are strategically
located to provide access
to both upper water
distribution system and
lower pan basin. The
patented doors provide a
complete air and water tight
seal without the use of
gaskets or fasteners
coated to resist corrosion.
Heavy duty, pillow block
type, self-aligning ball
bearings are located at
each end of the fan shaft.
No intermediate bearings are
required
Extended lube lines are supplied as standard
equipment to allow servicing bearings without
removal of fan guard screens.
WATER MAKE-UP
Water make-up is provided
by a solid brass float valve with arm
and float ball installed in an external float
b o x . This allows easy observation of the water
operating level and maintenance of the valve with unit
in operation.
WATER CIRCULATION PUMP
The water circulation pump is a close coupled, bronze
fitted centrifugal type with mechanical seal. Each
pump is factory mounted and piped. Standard motor
is open drip-proof suitable for outdoor service.
Construction: The Evaporative Fluid Cooler sump pan is constructed of 300 stainless steel and casing panels
are constructed of heavy gauge, G-235 galvanized steel. The sump pan and casing panels are flanged outward
so that all the connecting fasteners are located outside the flooded section of the unit to help prevent leaks
in the unit and provides a more permanent watertight joint. To provide further protection from corrosion, no
welded joints are located below the water line. The unit is designed for a 30 psf on any projected area and ships
in one piece on a minimum 6" high stainless steel channel base to help in handling and installation of the unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
Recold JW Series Fluid Cooler Schematic
/
/
4
A
C
ELIMINATOR
ACCESS
K
L
L
INLET
OUTLET
ACCESS
DOOR
SPRAY HEADER
CLEANOUT
INLET
CONNECTION
G
B
OUTLET
CONNECTION
EXTERNAL
FLOAT BOX
F
J
WATER SUPPLY Q
7
/8" MOUNTING
12"
H
12"
2"
HOLE (6)
DRAIN AND
2" LIFTING
HOLE (4)
OVERFLOW P
D
Access Doors
Far Side Near Side
Overflow
Water
Supply
FPT
Dimensions
Drain
FPT
P
Model
A
B
C
D
F
G
H
J
K
L
Top
Bottom
Top
Bottom
Q
1
JW10
JW15
JW25
JW35
JW50
JW70
JW85
JW100
JW115
JW130
80"
96"
76"
31"
84"
321⁄2
"
191⁄2
191⁄2
191⁄2
191⁄2
191⁄2
191⁄2
191⁄2
191⁄2
191⁄2
191⁄2
"
"
"
"
"
"
"
"
"
"
—
6"
53"
131⁄2
"
1
1
1
1
2
2
2
2
2
2
1
—
—
21⁄2
21⁄2
21⁄2
21⁄2
21⁄2
3"
"
"
"
"
"
⁄
⁄
⁄
⁄
2
2
2
4
"
"
"
"
1
1
3
76"
77"
37"
451⁄4
551⁄2
667⁄8
931⁄4
933⁄8
102"
124"
144"
1801⁄4
192"
217"
225"
249"
273"
311⁄2
34"
38"
41"
47"
47"
67"
67"
67"
"
—
511⁄4
51"
6"
6
65"
763⁄4
92"
16
201⁄2
141⁄2
173⁄8
1
1
1
1
1
1
2
2
2
—
1
—
1
1153⁄4
1391⁄2
1721⁄4
1841⁄4
208"
221"
2451⁄2
269"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
note 3
1
801⁄4
921⁄2
981⁄2
981⁄2
"
"
"
"
6"
1
note 3
1
"
713⁄4
841⁄2
961⁄2
80"
"
"
"
6"
115"
115"
2
1"
11⁄4
11⁄4
11⁄4
11⁄4
11⁄4
note 3
1
note 4
note 4
note 4
note 4
note 4
8"
2
"
"
"
"
"
note 3
1
8"
1391⁄4
1391⁄2
1641⁄2
188"
"
"
"
2
3"
note 3
2
1181⁄2
1181⁄2
1181⁄2
"
"
"
1001⁄2
1001⁄2
1001⁄2
"
"
"
10"
10"
10"
2
4"
note 3
2
"
104"
128"
2
4"
note 3
2
2
4"
note 3
Note
3 An additional bottom access door is installed on the
connection end.
1 Use this bulletin for preliminary layouts only. Obtain current
drawing from your Recold sales representative.
4. Consult Recold for coil connection locations.
2 If required add 6" for positive closure dampers. If required
add 6" for booster coil section.
5 If supporting the unit on beams, refer to the Recold
suggested supporting steel drawing for required mounting
hole location.
Download from Www.Somanuals.com. All Manuals Search And Download.
Recold JW Series Fluid Cooler Engineering Data
/
/
5
Approximate Weight lb
Fan Motor
hp*
Air Volume
Fan
RPM
Standard Fan
Motor Frame
Pump Motor
Spray Water
Sump Heater
Model
cfm
hp
GPM
kW
shipping
operating
1
JW10A
JW10B
JW10C
JW15B
JW15C
JW25A
JW25B
JW25C
JW35A
JW35B
JW35C
JW50A
JW50B
JW50C
JW70B
JW70C
JW85B
JW85C
JW100B
JW100C
JW115B
JW115C
JW130B
JW130C
2
2
3
5
5
5280
5150
5450
8500
8300
689
706
825
729
740
500
523
614
413
462
476
385
397
385
385
415
415
430
270
280
280
290
300
305
145T
145T
182T
184T
184T
184T
184T
213T
213T
215T
215T
254T
254T
254T
256T
284T
286T
286T
286T
286T
324T
324T
326T
326T
⁄
⁄
⁄
⁄
⁄
⁄
⁄
⁄
2
2
2
2
2
4
4
4
40
40
40
50
50
70
70
70
110
110
110
150
150
150
250
250
325
325
375
365
400
400
450
450
2.0
2.0
2.0
2.0
2.0
4.0
4.0
4.0
4.0
4.0
4.0
6.0
6.0
6.0
8.0
8.0
11.0
11.0
11.0
11.0
14.0
14.0
16.0
16.0
910
955
1400
1400
1500
2000
2400
2800
2900
3200
4300
4600
5000
6700
7200
1
1
1
1
3
3
3
1005
1365
1435
1850
1955
2075
2955
3140
3305
4380
4635
4885
6685
7085
7725
8185
9170
9675
10080
10670
11025
11720
5
5
11700
11800
13000
19000
20000
19500
30200
29200
28400
37200
39000
52300
50000
58300
61000
66000
69000
76500
80000
71⁄2
71⁄2
10
10
15
15
15
20
25
30
30
30
30
40
40
50
50
1
1
1
2
2
2
3
3
3
3
5
5
5
5
5
5
7600
10200
10900
11900
12900
16870
17775
19050
20170
21425
22620
* For static pressure from 1⁄4 to 1⁄2 ESP use next size larger motor
JWL
JW
JWH
Sump Capacity
Coil Volume
Coil Face Area
Model
gal
gal
sq ft
Circuits
Connection OD
Circuits
Connection OD
Circuits
Connection OD
5
5
@
@
JW10A
JW10B
JW10C
JW15B
JW15C
JW25A
JW25B
JW25C
JW35A
JW35B
JW35C
JW50A
JW50B
JW50C
JW70B
JW70C
JW85B
JW85C
JW100B
JW100C
JW115B
JW115C
JW130B
JW130C
10
21
21
26
26
33
33
33
41
41
41
50
50
50
70
70
70
70
76
76
76
76
76
76
2
2
2
2
2
2
2
2
2
2
2
2
2
2
4
4
4
4
4
4
4
4
4
4
2 ⁄8
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
43
43
43
64
64
95
95
95
163
163
163
248
248
248
374
374
454
454
748
748
880
880
1012
1012
21
42
42
52
52
66
66
66
82
2
2
2
2
2
2
2
2
2
2
2
2
2
2
4
4
4
4
4
4
4
4
4
4
2 ⁄8
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
16
20
24
31
37
37
47
57
54
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
9.7
9.7
9.7
5
5
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
2 ⁄8
2 ⁄8
5
5
2 ⁄8
2 ⁄8
1
1
3 ⁄8
3 ⁄8
14.5
14.5
21.6
21.6
21.6
32.5
32.5
32.5
49.6
49.6
49.6
70.4
70.4
85.5
85.5
92.5
92.5
108.9
108.9
125.2
125.2
1
1
3 ⁄8
3 ⁄8
1
1
3 ⁄8
3 ⁄8
1
1
3 ⁄8
3 ⁄8
1
1
3 ⁄8
3 ⁄8
1
1
3 ⁄8
3 ⁄8
1
1
1
@
3 ⁄8
82
82
3 ⁄8
70
86
82
164
205
—
4
4
3 ⁄8
"
"
1
1
1
@
3 ⁄8
3 ⁄8
3 ⁄8
1
1
3 ⁄8
100
100
100
140
140
140
140
152
152
152
152
152
152
3 ⁄8
—
1
1
1
@
@
@
@
@
@
@
@
@
@
@
@
3 ⁄8
3 ⁄8
106
130
146
182
177
200
212
262
247
305
305
349
200
250
280
350
280
350
304
380
304
380
304
380
4
4
8
8
8
8
8
8
8
8
8
8
3 ⁄8
3 ⁄8
3 ⁄8
3 ⁄8
3 ⁄8
3 ⁄8
3 ⁄8
3 ⁄8
3 ⁄8
3 ⁄8
3 ⁄8
3 ⁄8
"
"
"
"
"
"
"
"
"
"
"
"
1
1
1
3 ⁄8
3 ⁄8
1
1
1
3 ⁄8
3 ⁄8
1
1
1
3 ⁄8
3 ⁄8
1
1
1
3 ⁄8
3 ⁄8
1
1
1
3 ⁄8
3 ⁄8
1
1
1
3 ⁄8
3 ⁄8
1
1
1
3 ⁄8
3 ⁄8
1
1
1
3 ⁄8
3 ⁄8
1
1
1
3 ⁄8
3 ⁄8
1
1
1
3 ⁄8
3 ⁄8
1
1
1
3 ⁄8
3 ⁄8
Note
Inlet and outlet connection sizes shown are standard
copper OD and are sized for nominal flow rates. Actual
sizes should be specified to conform to job requirements.
If special connections are required, such as flanges or
threaded fittings, consult your Recold sales representative.
Connection quantity is total of in and out connections
Download from Www.Somanuals.com. All Manuals Search And Download.
Recold JW Series Fluid Cooler Freeze Protection
/
/
6
HEAT EXCHANGE COIL PROTECTION
For the most part, evaporative closed circuit coolers
will be installed for operation on a year-round basis.
Units installed in a cold climate must be provided with
adequate freeze protection for both the recirculating
water and the heat exchange coil for proper
The best means of heat exchanger coil freeze
protection is to circulate an ethylene glycol water
solution. The solution freeze points with respective
ethylene glycol by volume are given in Table 11
below. This method will allow freeze protection
irrespective of heat load or unit shut down.
equipment operation and maintenance.
Some applications will not permit the use of an
ethylene glycol solution. Under these circumstances,
other means of freeze protections must be used and
the following rules strictly adhered to.
RECIRCULATING WATER
The operation of evaporative cooled equipment under
approximately full load conditions will prevent freezing
of the recirculated water. However, during periods of
very little or no heat load when fans and pumps are
shut down, some form of freeze protection must be
used.
A simple form of freeze protection commonly used
is a remote sump tank inside a heated building
below the evaporative cooled equipment. The water
circulation pump is located at the remote tank
circulating water through the evaporative cooler
during load conditions. When the unit is shut down,
the water drains down into the remote sump tank
which is in a heated atmosphere.
The remote sump installation may be unacceptable in
some cases due to unit location or space limitations.
For these applications, pan water freeze protection
may be attained by means of an optional electric
heater located inside the unit pan. Electric pan
heaters are designed to prevent pan water freezing
during unit shut down with fans and pumps idle.
Water lines to and from the unit, pump, pump
discharge and drain lines must be wrapped with a
heat-tracing element and insulated to protect them
from freezing.
1. Maintain full flow through the coil
2. Maintain heat load on the coil at all time so that the
leaving water temperature does not drop below
+50°F
Full flow alone will not protect the coil.
Temperature of +50°F must also be maintained.
Methods of maintaining the recommended fluid
temperature may vary with system design and
operation. A simple means of preventing heat loss
may be to locate the unit indoors allowing a heated
atmosphere. Adequate space and ductwork must be
provided for proper operation.
Units operating in low ambient conditions with a
heat load which becomes very low or drops off
completely may require the addition of an artificial
load to maintain safe fluid temperature. The amount
of artificial load required may be reduced by means
of discharge positive closure dampers. The addition
of the dampers will prevent induced air circulation or
the chimney effect which may occur during unit shut
down.
The above methods of coil freeze protection, when
properly applied and maintained will provide good
equipment protection. All methods, other than
those using an adequate antifreeze solution, should
provide a means of emergency coil draining. It is
recommended that automatic drain valves and air
vents with vacuum breakers be installed on each
coil circuit. Adequately size drains with heat-tracing
tape and insulation should be provided for free
drainage. Should the circulating pump fail or the water
temperature leaving the coil drop below 50°F for any
reason, the coil will automatically drain preventing
freeze damage.
Table 1 Glycol Flow Correction Factors
Ethylene
Design Flow GPM
Unit Model
Glycol
JW/JWL
40
50
70
90 100 125 150 175 Above
By Volume
20%
30%
40%
50%
20%
30%
40%
50%
20%
30%
40%
50%
1.07 1.05 1.02 1.00 1.00 1.00 1.00 1.00 1.00
1.10 1.07 1.02 1.01 1.00 1.00 1.00 1.00 1.00
1.14 1.11 1.05 1.01 1.00 1.00 1.00 1.00 1.00
1.16 1.13 1.06 1.01 1.00 1.00 1.00 1.00 1.00
1.12 1.09 1.05 1.03 1.02 1.00 1.00 1.00 1.00
1.16 1.12 1.07 1.04 1.02 1.00 1.00 1.00 1.00
1.19 1.16 1.11 1.06 1.04 1.01 1.00 1.00 1.00
1.23 1.21 1.14 1.08 1.05 1.01 1.00 1.00 1.00
1.15 1.11 1.09 1.06 1.04 1.03 1.01 1.00 1.00
10A thru 35C
50A thru 50C
70B thru 130C
Ethylene Glycol (by volume)
Freeze
—
—
—
1.18 1.11 1.07 1.05 1.03 1.01 1.00 1.00
1.20 1.15 1.10 1.07 1.05 1.03 1.00 1.00
1.23 1.20 1.11 1.11 1.07 1.04 1.00 1.00
20%
30%
40%
50%
Point °F
14
3
-14
-38
Download from Www.Somanuals.com. All Manuals Search And Download.
Recold JW Series Fluid Cooler Selection Procedure
/
/
7
Closed circuit cooler selections can easily be made by using the information on pages 6 through 11. The
examples below demonstrate proper procedures for water and ethylene glycol solutions. Other fluids can be
cooled, but since their heat transfer and flow characteristics may vary, please contact your local Recold sales
representative for assistance.
WATER SELECTION EXAMPLE
ETHYLENE GLYCOL EXAMPLE
Select a unit to cool 225 GPM of water from 102°F to
90°F at 76°F wet bulb temperature.
1. Determine Range:
Select a unit to cool 75 GPM of 40% by volume
ethylene glycol from 107°F to 85°F with 78°F wet
bulb.
1. Determine Range:
102°F - 90°F = 12°F Range
2. Determine Approach:
107°F - 85°F = 22°F Range
2. Determine Approach:
90°F - 76°F = 14°F Approach
85°F - 78°F = 7°F Approach
3. Select Load Factor — Enter Table 2 for 78°F wet bulb
3. Select Load Factor — Enter Unit Load FactorTable 2
for 76°F wet bulb. Select load factor based on
12°F range and 14°F approach. Load factor in this
example equals 3.3. When wet bulb temperature
is an odd number interpolate between appropriate
tables to determine the load factor.
4. Select Unit Model — Table 3, the load factor
determined in step 3 falls between 3.0 and 3.5.
Enter the 3.0 column and read down to the smallest
unit flow rating which is greater than or equal to
225 GPM. For the Model JWL35B, interpolate
between 245 and 190 GPM to determine the
flow rating at the 3.3 load factor. Interpolation
gives a rating of 212 GPM which is less than the
design requirement. Select a Model JWL35C and
again interpolate between load factor columns
to determine flow rating. The second selection
provides a flow rating of 245 GPM which exceeds
the design requirement. The correct unit size is,
therefore, a Model 35C
5. Determine Flow Limitations — Enter Table 3 at unit
size determined in Step 4 to select a JWL low flow
or JW standard flow unit. The Model 35C with 225
GPM design flow falls within the standard coil flow
limitations. The correct unit selection is, therefore,
a JW35C.
6. Determine Coil Pressure Drop — Enter the Coil
Pressure Drop Table at 225 GPM and read across
to the unit model column to select pressure drop
reading. In this example, pressure drop equals
4.8 PSI.
and select load factor at design range and approach.
Select 6.0 factor.
4. SelectTest Unit Model — Enter the Unit Rating
Table 3 at the 6.0 load factor and read down to the
smallest unit flow rating greater than or equal to the
design 75 GPM. Select the test model JWL35C
5. Correct Flow for Ethylene Glycol — The flow correction
factor obtained from Table 1 is 1.04. 75 GPM x 1.04
= 78 GPM
6. Adjust Model Selection — Re-enter Table 3 at the 6.0
load factor and make selection based on corrected
flow of 78 GPM. The adjusted unit selection is the
Model JWL50A indicating an 80 GPM rating
7. Determine Flow Limitations — Enter Table 3 at unit
size determined in Step 6 to select a JWL low flow
or JW standard flow unit. The Model 50A with
75 GPM design flow falls within the low flow coil
limitations. The correct unit selection is, therefore,
a JWL50A.
8. Determine Coil Pressure Drop — For ethylene glycol
pressure drop calculation, the conversion factor
from Table 5 must be applied to design flow before
entering Table 4. 75 GPM x 1.05 = 79 GPM.
The coil pressure drop for 79 GPM is 2.4 PSI
DEFINITIONS
Range: the difference between the entering and
Load BTUH =
leaving water temperatures (WT in – WT out).
GPM x 500 x Sp. Gr. x Sp. Ht. x (T1 – T2) where
Sp. Gr. = specific gravity at average temperature
Sp. Ht. = specific heat at average temperature
T1 = entering temperature
Approach: the difference between the leaving water
temperature and the web bulb temperature (WT out
– WB).
T2 = leaving temperature
Download from Www.Somanuals.com. All Manuals Search And Download.
Recold JW Series Fluid Cooler Load Factors
/
/
8
TABLE NO. 2
60° WET BULB
62° WET BULB
RANGE
RANGE
6
8
10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
6.0 6.4 6.7 7. 2 7. 3 7. 5 7. 7 7. 9 8.0 8.2
6
8
10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
5.8 6.3 6.6 6.9 7. 1 7. 3 7. 5 7. 7 7. 9 7. 9 8.1
4.9 5.4 5.8 6.2 6.5 6.7 6.9 7. 1 7. 3 7. 4 7. 6 7. 8 7. 9 8.0 8.1
7
8
7
8
5.6 6.0 6.4 6.7 6.9 7. 1 7. 3 7. 5 7. 6 7. 8 7. 9 8.0
9
10
11
4.3 4.8 5.3 5.7 6.0 6.3 6.5 6.8 6.9 7. 1 7. 3 7. 4 7. 6 7. 7 7. 8 7. 9 8.0
4.0 4.5 5.0 5.4 5.7 6.0 6.2 6.4 6.6 6.8 6.9 7. 1 7. 3 7. 4 7. 5 7. 6 7. 8
3.8 4.3 4.7 5.0 5.3 5.6 5.9 6.1 6.3 6.5 6.6 6.8 6.9 7. 0 7. 2 7. 3 7. 4
9
10
4.1 4.6 5.0 5.4 5.8 6.0 6.4 6.5 6.7 6.9 7. 0 7. 2 7. 3 7. 5 7. 6 7. 8 7. 9
3.8 4.3 4.8 5.1 5.5 5.8 6.0 6.2 6.4 6.6 6.8 6.9 7. 0 7. 2 7. 3 7. 4 7. 6
11 3.0 3.6 4.2 4.6 4.9 5.2 5.5 5.7 6.0 6.2 6.3 6.5 6.7 6.8 7. 0 7. 1 7. 2 7. 3
12 2.8 3.5 4.0 4.4 4.7 5.0 5.3 5.5 5.7 5.9 6.1 6.3 6.4 6.5 6.7 6.8 7. 0 7. 1
13 2.7 3.3 3.7 4.1 4.5 4.8 5.1 5.3 5.5 5.7 5.9 6.0 6.2 6.3 6.5 6.6 6.8 6.9
14 2.5 3.1 3.5 3.9 4.3 4.6 4.8 5.0 5.2 5.5 5.6 5.8 5.9 6.1 6.2 6.3 6.5 6.7
15 2.2 2.9 3.3 3.7 4.1 4.3 4.6 4.8 5.0 5.2 5.4 5.5 5.7 5.8 6.0 6.1 6.3 6.4
16 2.2 2.8 3.0 3.6 3.9 4.2 4.4 4.6 4.8 5.1 5.2 5.4 5.5 5.7 5.8 6.0 6.1 6.3
17 2.1 2.7 3.1 3.5 3.8 4.1 4.3 4.5 4.7 4.9 5.0 5.2 5.4 5.5 5.7 5.8 6.0 6.1
18 2.1 2.5 3.0 3.4 3.7 3.9 4.2 4.4 4.5 4.7 4.9 5.0 5.2 5.3 5.5 5.6 5.8 5.9
19 2.0 2.4 2.9 3.2 3.5 3.8 4.0 4.2 4.4 4.6 4.7 4.9 5.0 5.2 5.3 5.4 5.6 5.8
20 1.9 2.3 2.8 3.1 3.4 3.6 3.9 4.1 4.2 4.4 4.6 4.7 4.9 5.0 5.2 5.3 5.5 5.6
21 1.8 2.3 2.7 3.0 3.3 3.5 3.8 4.0 4.1 4.3 4.5 4.6 4.8 4.9 5.1 5.2 5.3 5.5
22 1.8 2.2 2.6 2.9 3.2 3.4 3.7 3.9 4.0 4.2 4.4 4.5 4.7 4.8 4.9 5.1 5.2 5.4
23 1.7 2.1 2.5 2.8 3.1 3.3 3.5 3.7 3.9 4.1 4.3 4.4 4.5 4.7 4.8 4.9 5.1 5.2
24 1.6 2.1 2.5 2.7 3.0 3.2 3.4 3.6 3.8 4.0 4.1 4.3 4.4 4.6 4.7 4.8 5.0 5.1
25 1.6 2.0 2.4 2.6 2.9 3.1 3.3 3.5 3.7 3.9 4.0 4.2 4.3 4.5 4.6 4.7 4.8 5.0
26 1.5 2.0 2.3 2.6 2.8 3.1 3.3 3.4 3.6 3.8 3.9 4.1 4.2 4.4 4.5 4.6 4.7 4.9
12 2.9 3.5 4.0 4.5 4.8 5.1 5.4 5.6 5.8 6.0 6.2 6.4 6.5 6.6 6.8 6.9 7. 0 7. 2
13 2.8 3.2 3.8 4.2 4.5 4.9 5.1 5.4 5.6 5.8 5.9 6.2 6.3 6.4 6.5 6.7 6.8 6.9
14 2.5 3.1 3.6 4.0 4.3 4.6 4.9 5.1 5.3 5.5 5.7 5.9 6.0 6.2 6.3 6.4 6.6 6.8
15 2.4 3.0 3.5 3.9 4.1 4.5 4.7 4.9 5.2 5.4 5.5 5.7 5.8 6.0 6.1 6.3 6.4 6.6
16 2.3 2.8 3.3 3.7 4.0 4.3 4.6 4.8 4.9 5.1 5.3 5.5 5.6 5.7 5.9 6.1 6.3 6.4
17 2.2 2.7 3.2 3.6 3.9 4.1 4.4 4.6 4.8 4.9 5.1 5.3 5.4 5.7 5.8 5.9 6.0 6.2
18 2.1 2.6 3.0 3.6 3.8 4.0 4.2 4.4 4.6 4.8 4.9 5.1 5.3 5.4 5.6 5.8 5.9 6.0
19 2.0 2.5 2.9 3.3 3.6 3.9 4.1 4.3 4.5 4.7 4.8 4.9 5.2 5.3 5.4 5.6 5.8 5.9
20 1.9 2.4 2.8 3.2 3.4 3.7 3.9 4.2 4.3 4.5 4.7 4.8 4.9 5.1 5.3 5.4 5.6 5.7
21 1.9 2.4 2.7 3.1 3.4 3.6 3.9 4.1 4.2 4.4 4.6 4.7 4.9 5.0 5.3 5.3 5.4 5.6
22 1.8 2.3 2.6 3.0 3.2 3.5 3.7 3.9 4.1 4.3 4.4 4.6 4.7 4.9 5.0 5.2 5.3 5.4
23 1.8 2.3 2.6 3.0 3.2 3.5 3.7 3.9 4.1 4.3 4.4 4.6 4.7 4.8 5.0 5.2 5.3 5.4
24 1.7 2.1 2.5 2.8 3.1 3.3 3.5 3.7 3.9 4.1 4.3 4.4 4.5 4.6 4.8 4.9 5.1 5.2
25 1.6 2.1 2.4 2.7 3.0 3.2 3.4 3.6 3.8 3.9 4.1 4.2 4.4 4.6 4.7 4.8 4.9 5.1
26 1.6 2.0 2.3 2.6 2.9 3.2 3.3 3.5 3.7 3.9 4.0 4.1 4.3 4.4 4.6 4.7 4.8 4.9
27 1.5 2.0 2.3 2.6 2.8 3.1 3.3 3.4 3.6 3.8 3.9 4.1 4.2 4.3 4.4
27 1.5 1.9 2.2 2.5 2.8 3.0 3.2 3.4 3.6 3.7
3.8 4.0 4.1 4.3 4.4 4.5 4.6 4.7
4.6 4.7 4.8
28 1.5 1.9 2.2 2.5 2.8 3.0 3.2 3.4 3.5 3.7 3.8 4.0 4.1 4.2 4.3 4.4 4.6 4.7
29 1.4 1.8 2.1 2.4 2.7 2.9 3.1 3.3 3.4 3.6 3.7 3.9 4.0 4.1 4.2 4.4 4.5 4.6
30 1.4 1.8 2.1 2.4 2.6 2.8 3.0 3.2 3.3 3.5 3.6 3.8 3.9 4.0 4.1 4.3 4.4 4.5
28 1.5 1.8 2.2 2.4 2.7 2.9 3.1 3.3 3.5 3.6 3.7 3.9 4.0 4.2 4.3 4.4 4.5 4.6
29 1.4 1.8 2.1 2.3 2.6 2.8 3.0 3.2 3.4 3.5 3.6 3.8 3.9 4.1 4.2 4.3 4.4 4.5
30 1.4 1.7 2.0 2.3 2.5 2.8 3.0 3.1 3.3 3.4 3.5 3.7 3.8 4.0 4.1 4.2 4.3 4.4
64° WET BULB
66° WET BULB
RANGE
RANGE
6
8
10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
5.6 6.1 6.4 6.7 7. 0 7. 1 7. 4 7. 5 7. 7 7. 8 8.0
4.8 5.3 5.6 6.0 6.3 6.6 6.8 7. 0 7. 1 7. 3 7. 5 7. 6 7. 7 7. 8 7. 9 8.0
6
8
10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
5.0 5.5 5.9 6.3 6.5 6.8 7. 0 7. 2 7. 4 7. 5 7. 6 7. 8 7. 9 8.0
4.7 5.1 5.5 5.9 6.2 6.4 6.7 6.8 7. 0 7. 1 7. 3 7. 4 7. 5 7. 7 7. 8 7. 9
7
8
9
7
8
9
3.9 4.5 4.9 5.3 5.6 5.9 6.2 6.4 6.6 6.7 6.9 7. 1 7. 2 7. 3 7. 5 7. 6 7. 7
3.7 4.3 4.7 5.0 5.3 5.6 5.9 6.1 6.3 6.5 6.6 6.8 6.9 7. 0 7. 1 7. 3 7. 5
3.8 4.4 4.8 5.2 5.5 5.8 6.0 6.3 6.4 6.6 6.8 6.9 7. 0 7. 2 7. 3 7. 4 7. 6
10
10 3.0 3.6 4.1 4.5 4.9 5.2 5.4 5.7 5.9 6.1 6.3 6.4 6.6 6.8 6.9 7. 0 7. 1 7. 3
11 2.8 3.4 3.9 4.3 4.7 5.0 5.2 5.5 5.7 5.9 6.1 6.2 6.3 6.5 6.6 6.8 6.9 7. 1
12 2.7 3.2 3.7 4.1 4.5 4.8 5.0 5.2 5.4 5.6 5.8 6.0 6.1 6.3 6.4 6.5 6.7 6.9
13 2.5 3.1 3.5 3.9 4.3 4.5 4.8 5.0 5.2 5.4 5.6 5.7 5.9 6.0 6.2 6.3 6.5 6.6
14 2.3 2.9 3.4 3.7 4.1 4.3 4.6 4.8 5.0 5.2 5.3 5.5 5.7 5.8 6.0 6.1 6.2 6.4
15 2.2 2.7 3.2 3.5 3.9 4.1 4.4 4.6 4.8 4.9 5.1 5.3 5.4 5.6 5.7 5.9 6.0 6.2
16 2.1 2.6 3.1 3.4 3.7 4.0 4.2 4.4 4.6 4.8 4.9 5.1 5.3 5.4 5.6 5.7 5.8 6.0
17 2.0 2.5 3.0 3.3 3.6 3.9 4.1 4.3 4.5 4.6 4.8 5.0 5.1 5.3 5.4 5.6 5.7 5.9
18 1.9 2.4 2.8 3.2 3.5 3.7 4.0 4.2 4.4 4.5 4.7 4.8 5.0 5.1 5.3 5.4 5.5 5.7
19 1.8 2.3 2.7 3.0 3.4 3.6 3.8 4.0 4.2 4.4 4.5 4.7 4.8 5.0 5.1 5.2 5.4 5.5
20 1.8 2.2 2.6 2.9 3.2 3.5 3.7 3.9 4.1 4.2 4.4 4.5 4.7 4.8 5.0 5.1 5.2 5.4
21 1.7 2.2 2.5 2.8 3.1 3.4 3.6 3.8 4.0 4.1 4.3 4.4 4.6 4.7 4.9 5.0 5.1 5.2
22 1.7 2.1 2.5 2.8 3.0 3.3 3.5 3.7 3.9 4.0 4.2 4.3 4.5 4.6 4.7 4.8 5.0 5.1
23 1.6 2.0 2.4 2.7 3.0 3.2 3.4 3.6 3.7 3.9 4.0 4.2 4.3 4.5 4.6 4.7 4.9 5.0
24 1.6 1.9 2.3 2.6 2.9 3.1 3.3 3.5 3.6 3.8 3.9 4.1 4.2 4.4 4.5 4.6 4.7 4.9
25 1.5 1.9 2.2 2.5 2.8 3.0 3.2 3.4 3.5 3.7 3.8 3.9 4.1 4.3 4.4 4.5 4.6 4.7
26 1.5 1.8 2.2 2.4 2.7 2.9 3.1 3.2 3.4 3.6 3.7 3.9 4.0 4.2 4.3 4.4 4.5 4.6
11 2.9 3.5 4.1 4.5 4.9 5.1 5.4 5.6 5.8 6.0 6.2 6.3 6.5 6.7 6.8 6.9 7. 0 7. 2
12 2.7 3.4 3.9 4.3 4.6 4.9 5.1 5.4 5.6 5.8 6.0 6.1 6.3 6.4 6.6 6.7 6.8 7. 0
13 2.6 3.2 3.6 4.0 4.4 4.6 4.9 5.2 5.4 5.5 5.7 5.9 6.0 6.2 6.3 6.5 6.6 6.8
14 2.4 3.0 3.4 3.8 4.2 4.4 4.7 4.9 5.1 5.3 5.5 5.7 5.8 5.9 6.1 6.2 6.4 6.6
15 2.2 2.8 3.2 3.6 4.0 4.2 4.5 4.7 4.9 5.0 5.2 5.4 5.6 5.7 5.9 6.0 6.1 6.3
16 2.1 2.7 3.1 3.5 3.8 4.1 4.3 4.5 4.7 4.9 5.1 5.3 5.4 5.5 5.7 5.9 6.0 6.1
17 2.1 2.6 3.0 3.4 3.7 4.0 4.2 4.4 4.6 4.7 4.9 5.1 5.3 5.4 5.6 5.7 5.8 6.0
18 2.0 2.5 2.9 3.3 3.6 3.8 4.1 4.3 4.4 4.6 4.8 4.9 5.1 5.2 5.4 5.5 5.7 5.8
19 1.9 2.4 2.8 3.1 3.4 3.7 3.9 4.1 4.3 4.5 4.6 4.8 4.9 5.1 5.2 5.3 5.5 5.7
20 1.8 2.3 2.7 3.0 3.3 3.5 3.8 4.0 4.1 4.3 4.5 4.6 4.8 4.9 5.1 5.2 5.4 5.5
21 1.8 2.2 2.6 2.9 3.2 3.4 3.7 3.9 4.0 4.2 4.4 4.5 4.7 4.8 5.0 5.1 5.2 5.4
22 1.8 2.1 2.5 2.8 3.1 3.3 3.6 3.8 3.9 4.1 4.3 4.4 4.6 4.7 4.8 5.0 5.1 5.3
23 1.7 2.1 2.4 2.7 3.0 3.3 3.4 3.6 3.8 4.0 4.1 4.3 4.4 4.6 4.7 4.8 5.0 5.1
24 1.6 2.0 2.4 2.7 2.9 3.2 3.3 3.5 3.7 3.9 4.0 4.2 4.3 4.5 4.6 4.7 4.9 5.0
25 1.6 1.9 2.3 2.6 2.8 3.1 3.2 3.4 3.6 3.8 3.9 4.1 4.2 4.4 4.5 4.6 4.7 4.9
26 1.5 1.9 2.2 2.5 2.7 3.0 3.2 3.3 3.5 3.7 3.8 4.0 4.1 4.3 4.4 4.5 4.6 4.8
27 1.5 1.8 2.1 2.4 2.7 2.9 3.1 3.3 3.5
27 1.4 1.8 2.1 2.4 2.6
2.9 3.0 3.2 3.4 3.5 3.6 3.8 3.9 4.0 4.2 4.3 4.4 4.5
3.6 3.7 3.9 4.0 4.2 4.3 4.4 4.5 4.6
28 1.4 1.8 2.1 2.3 2.6 2.8 3.0 3.2 3.4 3.5 3.6 3.8 3.9 4.1 4.2 4.3 4.4 4.5
29 1.4 1.7 2.0 2.3 2.5 2.8 2.9 3.1 3.3 3.4 3.5 3.7 3.8 4.0 4.1 4.2 4.3 4.4
30 1.3 1.6 1.9 2.2 2.4 2.7 2.9 3.0 3.2 3.3 3.4 3.6 3.7 3.9 4.0 4.1 4.2 4.3
28 1.4 1.7 2.0 2.3 2.5 2.8 2.9 3.1 3.3 3.4 3.6 3.7 3.8 4.0 4.1 4.2 4.3 4.4
29 1.3 1.6 1.9 2.2 2.4 2.7 2.9 3.0 3.2 3.4 3.5 3.6 3.7 3.9 4.0 4.1 4.2 4.3
30 1.3 1.6 1.9 2.1 2.3 2.6 2.8 2.9 3.1 3.3 3.4 3.5 3.6 3.8 3.9 4.0 4.1 4.2
68° WET BULB
70° WET BULB
RANGE
RANGE
6
8
10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
6
8
10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
7
8
9
4.4 4.9 5.1 5.7 6.1 6.4 6.6 6.9 7. 0 7. 2 7. 4 7. 5 7. 6 7. 8 7. 9
4.0 4.6 5.0 5.4 5.7 6.0 6.2 6.5 6.6 6.8 7. 0 7. 1 7. 2 7. 4 7. 5 7. 6 7. 7
3.7 4.3 4.7 5.1 5.4 5.6 5.9 6.1 6.3 6.5 6.6 6.8 6.9 7. 1 7. 2 7. 3 7. 5
7
8
9
4.2 4.8 5.2 5.6 6.0 6.3 6.5 6.7 6.9 7. 1 7. 2 7. 4 7. 5 7. 7 7. 8 7. 9 8.0
3.2 3.9 4.4 4.9 5.3 5.6 5.9 6.1 6.3 6.5 6.7 6.9 7. 0 7. 1 7. 3 7. 4 7. 5 7. 6
3.0 3.6 4.2 4.6 4.9 5.2 5.5 5.8 5.9 6.2 6.3 6.5 6.6 6.8 6.9 7. 0 7. 2 7. 3
10 2.9 3.5 4.0 4.4 4.8 5.1 5.3 5.6 5.7 6.0 6.1 6.3 6.5 6.6 6.7 6.8 7. 0 7. 1
11 2.7 3.3 3.8 4.2 4.6 4.9 5.1 5.4 5.5 5.7 5.9 6.1 6.2 6.4 6.5 6.7 6.8 6.9
12 2.6 3.1 3.6 4.0 4.4 4.7 4.9 5.1 5.3 5.5 5.7 5.8 6.0 6.1 6.3 6.4 6.6 6.7
13 2.4 3.0 3.4 3.8 4.2 4.4 4.7 4.9 5.1 5.3 5.4 5.6 5.8 5.9 6.1 6.2 6.4 6.5
14 2.2 2.8 3.3 3.6 4.0 4.2 4.5 4.7 4.9 5.1 5.2 5.4 5.6 5.7 5.8 6.0 6.1 6.3
15 2.1 2.6 3.1 3.4 3.8 4.0 4.3 4.5 4.7 4.8 5.0 5.1 5.3 5.5 5.6 5.8 5.9 6.1
16 2.0 2.5 3.0 3.3 3.6 3.9 4.1 4.3 4.5 4.7 4.8 5.0 5.2 5.3 5.5 5.6 5.8 5.9
17 1.9 2.4 2.9 3.2 3.5 3.8 4.0 4.2 4.4 4.5 4.7 4.8 5.0 5.2 5.3 5.5 5.6 5.8
18 1.9 2.3 2.7 3.1 3.4 3.6 3.9 4.1 4.3 4.4 4.6 4.7 4.9 5.0 5.2 5.3 5.4 5.6
19 1.8 2.2 2.6 2.9 3.3 3.5 3.7 3.9 4.1 4.3 4.4 4.6 4.7 4.9 5.0 5.1 5.3 5.4
20 1.7 2.1 2.5 2.8 3.1 3.4 3.6 3.8 4.0 4.1 4.3 4.4 4.6 4.7 4.9 5.0 5.1 5.3
21 1.7 2.1 2.4 2.7 3.0 3.3 3.5 3.7 3.9 4.0 4.2 4.3 4.5 4.6 4.8 4.9 5.0 5.1
22 1.6 2.0 2.4 2.7 2.9 3.2 3.4 3.6 3.8 3.9 4.1 4.2 4.4 4.5 4.6 4.7 4.9 5.0
23 1.6 1.9 2.3 2.6 2.9 3.1 3.3 3.5 3.6 3.8 3.9 4.1 4.2 4.4 4.5 4.6 4.7 4.9
24 1.5 1.9 2.2 2.5 2.8 3.0 3.2 3.4 3.5 3.7 3.8 4.0 4.1 4.3 4.4 4.5 4.6 4.8
25 1.5 1.8 2.1 2.4 2.7 2.9 3.1 3.3 3.4 3.6 3.7 3.9 4.0 4.2 4.3 4.4 4.5 4.6
26 1.4 1.8 2.1 2.4 2.6 2.8 3.0 3.2 3.3 3.5 3.6 3.8 3.9 4.1 4.2 4.3 4.4 4.5
10 2.8 3.4 3.9 4.3 4.6 4.9 5.2 5.4 5.6 5.8 6.0 6.2 6.3 6.4 6.6 6.7 6.9 7. 0
11 2.6 3.2 3.7 4.1 4.4 4.7 5.0 5.2 5.4 5.6 5.8 5.9 6.1 6.2 6.4 6.5 6.7 6.8
12 2.5 3.0 3.5 3.9 4.2 4.5 4.8 5.0 5.2 5.4 5.6 5.7 5.9 6.0 6.1 6.3 6.4 6.6
13 2.3 2.9 3.3 3.7 4.1 4.3 4.6 4.8 5.0 5.2 5.3 5.5 5.6 5.8 5.9 6.1 6.2 6.4
14 2.2 2.7 3.2 3.5 3.9 4.1 4.4 4.6 4.7 4.9 5.1 5.2 5.4 5.5 5.7 5.8 6.0 6.2
15 2.0 2.5 3.0 3.3 3.7 3.9 4.2 4.4 4.5 4.7 4.9 5.0 5.2 5.3 5.5 5.6 5.8 6.0
16 2.0 2.4 2.9 3.2 3.6 3.8 4.0 4.2 4.4 4.6 4.7 4.9 5.0 5.2 5.3 5.5 5.6 5.8
17 1.9 2.3 2.8 3.1 3.4 3.7 3.9 4.1 4.3 4.4 4.6 4.7 4.9 5.0 5.2 5.3 5.5 5.7
18 1.8 2.3 2.7 3.0 3.3 3.6 3.8 4.0 4.1 4.3 4.5 4.6 4.8 4.9 5.1 5.2 5.3 5.5
19 1.7 2.2 2.6 2.9 3.2 3.4 3.7 3.8 4.0 4.2 4.3 4.5 4.6 4.8 4.9 5.0 5.2 5.3
20 1.7 2.1 2.5 2.8 3.1 3.3 3.5 3.7 3.9 4.0 4.2 4.3 4.5 4.6 4.8 4.9 5.0 5.2
21 1.6 2.0 2.1 2.7 3.0 3.2 3.4 3.6 3.8 3.9 4.1 4.2 4.4 4.5 4.6 4.8 4.9 5.0
22 1.6 2.0 2.3 2.6 2.9 3.1 3.3 3.5 3.7 3.8 4.0 4.1 4.3 4.4 4.5 4.6 4.8 4.9
23 1.5 1.9 2.2 2.5 2.8 3.0 3.2 3.4 3.6 3.7 3.9 4.0 4.1 4.3 4.4 4.5 4.6 4.8
24 1.5 1.8 2.2 2.5 2.7 2.9 3.1 3.3 3.5 3.6 3.5 3.9 4.0 4.1 4.3 4.4 4.5 4.6
25 1.4 1.8 2.1 2.4 2.6 2.8 3.0 3.2 3.4 3.5 3.7 3.8 3.9 4.0 4.1 4.3 4.4 4.5
26 1.4 1.7 2.0 2.3 2.5 2.7 2.9 3.1 3.3 3.4 3.6 3.7 3.8 3.9 4.0 4.2 4.3. 4.4
27 1.4 1.7 2.0
27
2.3 2.5 2.8 2.9 3.1 3.3 3.4 3.5 3.8 3.8 4.0 4.1 4.2 4.3 4.4
1.3 1.7 2.0 2.2 2.5 2.7 2.9 3.0 3.2 3.3 3.5 3.6 3.7 3.8 4.0 4.1 4.2 .4.3
28 1.3 1.6 1.9 2.2 2.4 2.7 2.8 3.0 3.2 3.3 3.5 3.6 3.7 3.9 4.0 4.1 4.2 4.3
29 1.3 1.6 1.9 2.0 2.4 2.6 2.8 2.9 3.1 3.3 3.4 3.5 3.6 3.8 3.9 4.0 4.1 4.2
30 1.2 1.5 1.8 2.1 2.3 2.5 2.7 2.8 3.0 3.2 3.3 3.4 3.5 3.7 3.8 3.9 4.0 4.1
28 1.3 1.6 1.9 2.2 2.4 2.6 2.8 3.0 3.1 3.3 3.4 3.5 3.7 3.8 3.9 4.0 4.1 4.2
29 1.2 1.5 1.8 2.1 2.3 2.5 2.7 2.9 3.0 3.2 3.3 3.4 3.6 3.7 3.8 3.9 4.0 4.1
30 1.2 1.5 1.8 2.0 2.2 2.4 2.6 2.8 2.9 3.1 3.2 3.3 3.5 3.6 3.7 3.8 3.9 4.0
Download from Www.Somanuals.com. All Manuals Search And Download.
Recold JW Series Fluid Cooler Load Factors
/
/
9
TABLE NO. 2
72° WET BULB
74° WET BULB
RANGE
10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
4.1 4.7 5.1 5.5 5.9 6.1 6.4 6.6 6.8 7. 0 7. 1 7. 3 7. 4 7. 6 7. 7 7. 8 7. 9
RANGE
10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
4.0 4.5 5.0 5.4 5.7 6.0 6.3 6.4 6.7 6.8 7. 0 7. 2 7. 3 7. 4 7. 5 7. 7 7. 8
6
8
6
8
7
8
9
7
8
9
3.1 3.8 4.3 4.8 5.1 5.5 5.7 6.0 6.2 6.4 6.6 6.7 6.9 7. 0 7. 1 7. 3 7. 4 7. 5
2.9 3.5 4.1 4.4 4.8 5.1 5.4 5.6 5.8 6.0 6.1 6.4 6.5 6.6 6.7 6.9 7. 0 7. 1
3.0 3.7 4.2 4.7 5.0 5.3 5.6 5.8 6.0 6.2 6.4 6.6 6.7 6.8 6.9 7. 1 7. 3 7. 4
2.8 3.4 3.9 4.3 4.7 4.9 5.2 5.4 5.6 5.9 6.0 6.2 6.4 6.5 6.6 6.8 6.9 7. 0
10 2.7 3.3 3.8 4.2 4.5 4.8 5.1 5.3 5.5 5.7 5.9 6.0 6.2 6.3 6.5 66 6.7 6.9
11 2.5 3.1 3.6 4.0 4.3 4.6 4.9 5.1 5.3 5.5 5.7 5.8 6.0 6.1 6.3 6.4 6.5 6.7
12 2.4 2.9 3.4 3.8 4.1 4.4 4.7 4.9 5.1 5.3 5.5 5.6 5.7 5.8 6.0 6.2 6.3 6.5
13 2.3 2.8 3.2 3.6 4.0 4.2 4.5 4.7 4.9 5.1 5.2 5.4 5.5 5.7 5.8 5.9 6.1 6.3
14 2.1 2.6 3.1 3.4 3.8 4.0 4.3 4.5 4.6 4.8 5.0 5.1 5.3 5.4 5.6 5.7 5.9 6.1
15 2.0 2.5 2.9 3.2 3.6 3.8 4.1 4.3 4.4 4.6 4.8 4.9 5.1 5.2 5.4 5.5 5.7 5.9
16 1.9 2.4 2.8 3.1 3.5 3.7 3.9 4.1 4.3 4.5 4.6 4.8 4.9 5.1 5.2 5.4 5.5 5.7
17 1.9 2.3 2.7 3.0 3.3 3.6 3.8 4.0 4.2 4.3 4.5 4.7 4.8 4.9 5.1 5.2 5.4 5.6
18 1.8 2.2 2.6 2.9 3.2 3.5 3.7 3.9 4.0 4.2 4.4 4.5 4.7 4.8 5.0 5.1 5.2 5.4
19 1.7 2.1 2.5 2.8 3.1 3.3 3.6 3.7 3.9 4.1 4.2 4.4 4.5 4.7 4.8 4.9 5.1 5.2
20 1.6 2.0 2.4 2.7 3.0 3.2 3.4 3.6 3.8 3.9 4.1 4.2 4.4 4.5 4.7 4.8 4.9 5.1
21 1.6 2.0 2.3 2.6 2.9 3.1 3.2 3.5 3.7 3.8 4.0 4.1 4.3 4.4 4.5 4.7 4.8 4.9
22 1.5 1.9 2.2 2.5 2.8 3.0 3.2 3.4 3.6 3.7 3.9 4.0 4.2 4.3 4.4 4.5 4.7 4.8
23 1.4 1.8 2.2 2.4 2.7 2.9 3.1 3.3 3.5 3.7 3.8 3.9 4.1 4.2 4.3 4.4 4.5 4.7
24 1.4 1.8 2.1 2.4 2.6 2.8 3.0 3.2 3.4 3.5 3.7 3.8 3.9 4.0 4.2 4.3 4.4 4.5
25 1.3 1.7 2.0 2.3 2.5 2.7 2.9 3.1 3.3 3.4 3.6 3.7 3.8 3.9 4.0 4.2 4.3 4.4
26 1.3 1.7 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.3 3.5 3.6 3.7 3.8 3.9 4.1 4.2 4.3
27 1.2 1.6 1.9 2.1 2.4 2.6 2.8 2.9 3.1 3.2 3.4 3.5 3.6 3.7 3.9 4.0 4.1 4.2
28 1.2 1.5 1.8 2.1 2.3 2.5 2.7 2.9 3.0 3.2 3.3 3.4 3.6 3.7 3.8 3.9 4.0 4.1
29 1.2 1.5 1.7 2.0 2.2 2.4 2.6 2.8 2.9 3.1 3.2 3.3 3.5 3.6 3.7 3.8 3.9 4.0
30 1.1 1.4 1.7 1.9 2.1 2.3 2.5 2.6 2.8 3.0 3.1 3.2 3.4 3.5 3.6 3.7 3.8 3.9
10 2.6 3.1 3.7 4.1 4.4 4.7 4.9 5.1 5.4 5.6 5.8 5.9 6.0 6.2 6.3 6.4 6.6 6.8
11 2.5 3.0 3.5 3.9 4.2 4.5 4.7 4.9 5.2 5.4 5.5 5.7 5.8 6.0 6.1 6.2 6.4 6.6
12 2.3 2.9 3.3 3.7 4.0 4.3 4.5 4.7 4.9 5.1 5.3 5.4 5.6 5.7 5.9 6.0 6.2 6.4
13 2.2 2.7 3.2 3.5 3.8 4.1 4.3 4.6 4.7 4.9 5.1 5.2 5.4 5.5 5.7 5.8 6.0 6.1
14 2.1 2.6 3.0 3.4 3.7 3.9 4.1 4.4 4.5 4.7 4.9 5.0 5.2 5.3 5.5 5.6 5.8 5.9
15 2.0 2.4 2.8 3.2 3.5 3.7 3.9 4.2 4.3 4.5 4.7 4.8 5.0 5.1 5.3 5.4 5.6 5.7
16 1.9 2.3 2.7 3.1 3.4 3.6 3.8 4.0 4.2 4.3 4.5 4.7 4.8 5.0 5.1 5.3 5.4 5.6
17 1.8 2.2 2.6 3.0 3.2 3.5 3.7 3.9 4.1 4.2 4.4 4.5 4.7 4.8 5.0 5.1 5.3 5.4
18 1.7 2.2 2.5 2.8 3.1 3.4 3.6 3.8 4.0 4.1 4.3 4.4 4.6 4.7 4.8 5.0 5.1 5.2
19 1.7 2.1 2.4 2.7 3.0 3.2 3.5 3.7 3.8 4.0 4.1 4.3 4.4 4.6 4.7 4.8 4.9 5.1
20 1.6 2.0 2.3 2.6 2.9 3.1 3.3 3.5 3.7 3.8 4.0 4.1 4.3 4.4 4.5 4.7 4.8 4.9
21 1.5 1.9 2.3 2.5 2.8 3.0 3.2 3.4 3.6 3.7 3.9 4.0 4.2 4.3 4.4 4.6 4.7 4.8
22 1.5 1.9 2.2 2.5 2.7 2.9 3.1 3.3 3.5 3.6 3.8 3.9 4.1 4.2 4.3 4.4 4.5 4.6
23 1.4 1.8 2.1 2.4 2.6 2.9 3.1 3.2 3.4 3.5 3.7 3.8 3.9 4.1 4.2 4.3 4.4 4.5
24 1.3 1.7 2.0 2.3 2.5 2.8 3.0 3.1 3.3 3.4 3.6 3.7 3.8 3.9 4.1 4.2 4.3 4.4
25 1.3 1.7 2.0 2.2 2.4 2.7 2.9 3.0 3.2 3.3 3.5 3.6 3.7 3.8 3.9 4.1 4.2 4.3
26 1.2 1.6 1.9 2.2 2.4 2.6 2.8 2.9 3.1 3.2 3.4 3.5 3.6 3.7 3.8 4.0 4.1 4.2
27 1.2 1.6 1.8 2.1 2.3 2.5 2.7 2.9 3.0 3.1 3.3 3.4 3.5 3.6 3.8 3.9 4.0 4.1
28 1.2 1.5 1.8 2.0 2.2 2.4 2.6 2.8 2.9 3.1 3.2 3.3 3.5 3.6 3.7 3.8 3.9 4.0
29 1.1 1.4 1.7 1.9 2.1 2.4 2.5 2.7 2.9 3.0 3.1 3.3 3.4 3.5 3.6 3.7 3.8 3.9
30 1.1 1.4 1.6 1.9 2.1 2.3 2.4 2.6 2.8 2.9 3.0 3.2 3.3 3.4 3.5 3.6 3.7 3.8
76° WET BULB
78° WET BULB
RANGE
RANGE
6
8
10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
6
8
10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
7
8
9
3.8 4.3 4.8 5.2 5.5 5.6 6.1 6.2 6.5 6.6 6.8 7. 0 7. 1 7. 2 7. 3 7. 5 7. 6
2.9 3.5 4.0 4.5 4.8 5.1 5.4 5.6 5.8 6.0 6.2 6.4 6.5 6.6 6.7 6.9 7. 0 7. 2
2.7 3.3 3.8 4.2 4.5 4.8 5.1 5.3 5.5 5.7 5.9 6.0 6.2 6.3 6.5 6.6 6.8 6.9
7
8
9
3.0 3.6 4.2 4.6 5.0 5.3 5.6 5.9 6.0 6.3 6.4 6.6 6.8 6.9 7. 0 7. 1 7. 3 7. 4
2.8 3.4 3.9 4.3 4.6 4.9 5.2 5.4 5.6 5.8 6.0 6.2 6.3 6.5 6.6 6.7 6.9 7. 0
2.6 3.1 3.6 4.0 4.4 4.7 4.9 5.1 5.3 5.5 5.7 5.9 6.0 6.2 6.3 6.5 6.6 6.8
10 2.5 3.0 3.5 4.0 4.2 4.6 4.8 5.0 5.2 5.4 5.6 5.7 5.9 6.0 6.2 6.3 6.5 6.6
11 2.4 2.9 3.4 3.8 4.1 4.4 4.6 4.8 5.0 5.2 5.4 5.5 5.7 5.8 6.0 6.1 6.3 6.4
12 2.2 2.8 3.2 3.6 3.9 4.2 4.4 4.6 4.8 5.0 5.2 5.3 5.5 5.6 5.8 5.9 6.1 6.2
13 2.1 2.6 3.1 3.4 3.7 4.0 4.2 4.5 4.6 4.8 5.0 5.1 5.3 5.4 5.6 5.7 5.9 6.0
14 2.0 2.5 2.9 3.3 3.6 3.8 4.0 4.3 4.4 4.6 4.8 4.9 5.1 5.2 5.4 5.5 5.7 5.8
15 1.8 2.3 2.7 3.1 3.4 3.6 3.8 4.1 4.2 4.4 4.6 4.7 4.9 5.0 5.2 5.3 5.5 5.6
16 1.8 2.2 2.6 3.0 3.3 3.5 3.7 3.9 4.1 4.2 4.4 4.6 4.7 4.9 5.0 5.2 5.3 5.4
17 1.7 2.1 2.5 2.9 3.1 3.4 3.6 3.8 4.0 4.1 4.3 4.4 4.6 4.7 4.9 5.0 5.2 5.3
18 1.6 2.1 2.4 2.7 3.0 3.3 3.5 3.7 3.8 4.0 4.2 4.3 4.5 4.6 4.7 4.9 5.0 5.1
19 1.6 2.0 2.3 2.6 2.9 3.1 3.4 3.6 3.7 3.9 4.0 4.2 4.3 4.5 4.6 4.7 4.8 4.9
20 1.5 1.9 2.2 2.5 2.8 3.0 3.2 3.4 3.6 3.7 3.9 4.0 4.2 4.3 4.4 4.6 4.7 4.8
21 1.5 1.8 2.2 2.4 2.7 2.9 3.1 3.3 3.5 3.6 3.8 3.9 4.1 4.2 4.3 4.5 4.6 4.7
22 1.4 1.8 2.1 2.4 2.6 2.8 3.0 3.2 3.4 3.5 3.7 3.8 4.0 4.1 4.2 4.3 4.4 4.5
23 1.4 1.7 2.0 2.3 2.5 2.8 3.0 3.1 3.3 3.4 3.6 3.7 3.8 4.0 4.1 4.2 4.3 4.4
24 1.3 1.6 1.9 2.2 2.4 2.7 2.9 3.0 3.2 3.3 3.5 3.6 3.7 3.8 4.0 4.1 4.2 4.3
25 1.3 1.6 1.9 2.1 2.3 2.6 2.8 2.9 3.1 3.2 3.4 3.5 3.6 3.7 3.8 4.0 4.1 4.2
26 1.2 1.5 1.8 2.1 2.3 2.5 2.7 2.8 3.0 3.1 3.3 3.4 3.5 3.6 3.7 3.9 4.0 4.1
27 1.2 1.5 1.8 2.0 2.2 2.4 2.6 2.8 2.9 3.1 3.2 3.3 3.4 3.5 3.7 3.8 3.9 4.0
28 1.2 1.5 1.7 1.9 2.1 2.3 2.5 2.7 2.8 3.0 3.1 3.2 3.4 3.5 3.6 3.7 3.8 3.9
29 1.1 1.4 1.6 1.8 2.1 2.3 2.1 2.6 2.8 2.9 3.0 3.2 3.3 3.4 3.5 3.6 3.7 3.8
30 1.1 1.4 1.6 1.8 2.0 2.2 2.4 2.5 2.7 2.8 2.9 3.1 3.2 3.3 3.4 3.5 3.6 3.7
10 2.4 2.9 3.4 3.8 4.1 4.4 4.7 4.9 5.1 5.3 5.4 5.6 5.7 5.9 6.0 6.2 6.3 6.5
11 2.3 2.8 3.3 3.7 4.0 4.2 4.5 4.7 4.9 5.1 5.2 5.4 5.5 5.7 5.8 6.0 6.1 6.3
12 2.2 2.6 3.1 3.5 3.8 4.0 4.3 4.5 4.7 4.9 5.0 5.2 5.3 5.5 5.6 5.8 5.9 6.1
13 2.0 2.5 3.0 3.3 3.6 3.9 4.1 4.3 4.5 4.7 4.8 5.0 5.1 5.3 5.4 5.6 5.7 5.9
14 1.9 2.4 2.8 3.2 3.4 3.7 3.9 4.1 4.3 4.5 4.6 4.8 4.9 5.1 5.2 5.4 5.5 5.7
15 1.8 2.3 2.7 3.0 3.3 3.5 3.7 3.9 4.1 4.3 4.4 4.6 4.7 4.9 5.0 5.2 5.3 5.5
16 1.7 2.2 2.6 2.9 3.2 3.4 3.6 3.8 4.0 4.1 4.3 4.4 4.6 4.7 4.9 5.0 5.2 5.3
17 1.7 2.1 2.5 2.8 3.1 3.3 3.5 3.7 3.9 4.0 4.2 4.3 4.4 4.6 4.7 4.9 5.0 5.1
18 1.6 2.0 2.4 2.7 2.9 3.2 3.4 3.6 3.7 3.9 4.1 4.2 4.3 4.5 4.6 4.7 4.8 5.0
19 1.5 1.9 2.3 2.6 2.8 .31 3.3 3.5 3.6 3.8 3.9 4.1 4.2 4.3 4.5 4.6 4.7 4.8
20 1.5 1.8 2.2 2.5 2.7 3.0 3.2 3.3 3.5 3.6 3.8 3.9 4.0 4.2 4.3 4.4 4.5 4.6
21 1.4 1.8 2.1 2.4 2.6 2.9 3.1 3.2 3.4 3.5 3.7 3.8 3.9 4.1 4.2 4.3 4.4 4.5
22 1.4 1.7 2.0 2.3 2.5 2.8 3.0 3.1 3.3 3.4 3.6 3.7 3.8 4.0 4.1 4.2 4.3 4.4
23 1.3 1.6 2.0 2.2 2.5 2.7 2.9 3.0 3.2 3.4 3.5 3.6 3.7 3.8 4.0 4.1 4.2 4.3
24 1.3 1.6 1.9 2.2 2.4 2.6 2.8 2.9 3.1 3.3 3.4 3.5 3.6 3.7 3.9 4.0 4.1 4.1
25 1.2 1.5 1.8 2.1 2.3 2.5 2.7 2.8 3.0 3.2 3.3 3.4 3.5 3.6 3.8 3.9 4.0 4.0
26 1.2 1.5 1.8 2.0 2.2 2.4 2.6 2.8 2.9 3.1 3.2 3.3 3.4 3.5 3.7 3.8 3.9
3.9
27 1.1 1.4 1.7 1.9 2.2 2.4 2.5 2.7 2.9 3.0 3.1 3.2 3.3 3.4 3.6 3.7 3.8 3.8
28 1.1 1.4 1.6 1.9 2.1 2.3 2.5 2.6 2.8 2.9 3.0 3.1 3.3 3.4 3.5 3.6 3.7 3.8
29 1.1 1.4 1.6 1.8 2.0 2.2 .24 2.5 2.7 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7
30 1.0 1.3 1.5 1.7 2.0 2.1 2.3 2.5 2.6 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6
80° WET BULB
82° WET BULB
RANGE
RANGE
6
8
10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
6
8
10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
7
8
9
2.9 3.5 4.1 4.5 4.8 5.1 5.4 5.7 5.9 6.1 6.2 6.4 6.6 6.7 6.8 7. 0 7. 1 7. 2
2.7 3.3 3.8 4.2 4.5 4.8 5.1 5.3 5.5 5.7 5.9 6.1 6.2 6.4 6.5 6.6 6.8 6.9
2.5 3.0 3.5 3.9 4.3 4.5 4.8 5.0 5.2 5.4 5.6 5.7 5.9 6.1 6.2 6.3 6.5 6.6
7
8
9
2.8 3.4 3.9 4.3 4.7 5.0 5.3 5.5 5.7 5.9 6.1 6.3 6.4 6.5 6.7 6.8 6.9 7. 1
2.6 3.2 3.6 4.0 4.4 4.7 4.9 5.2 5.4 5.6 5.8 5.9 6.1 6.2 6.4 6.5 6.6 6.8
2.4 2.9 3.4 3.8 4.1 4.4 4.7 4.8 5.0 5.3 5.4 5.6 5.8 5.9 6.2 6.4 6.5 6.6
10 2.3 2.8 3.3 3.7 4.0 4.3 4.5 4.8 4.9 5.1 5.3 5.5 5.6 5.8 5.9 6.1 6.2 6.4
11 2.2 2.7 3.2 3.6 3.9 4.1 4.4 4.5 4.7 4.9 5.1 5.3 5.4 5.6 5.7 5.9 6.0 6.2
12 2.1 2.6 3.0 3.4 3.7 3.9 4.2 4.4 4.6 4.7 4.9 5.1 5.2 5.4 5.5 5.7 5.8 6.0
13 2.0 2.4 2.9 3.2 3.5 3.8 4.0 4.2 4.4 4.6 4.7 4.9 5.0 5.2 5.3 5.5 5.6 5.8
14 1.9 2.3 2.7 3.1 3.3 3.6 3.8 4.0 4.2 4.4 4.5 4.7 4.8 5.0 5.1 5.3 5.4 5.6
15 1.8 2.2 2.6 2.9 3.2 3.4 3.6 3.8 4.0 4.2 4.3 4.5 4.6 4.8 4.9 5.1 5.2 5.4
16 1.7 2.1 2.5 2.8 3.1 3.3 3.5 3.7 3.9 4.0 4.2 4.3 4.5 4.6 4.8 4.9 5.1 5.2
17 1.6 2.0 2.4 2.7 3.0 3.2 3.4 3.6 3.8 3.9 4.1 4.2 4.3 4.5 4.6 4.8 4.9 5.0
18 1.6 1.9 2.3 2.6 2.8 3.1 3.3 3.5 3.6 3.8 4.0 4.1 4.2 4.4 4.5 4.6 4.7 4.9
19 1.5 1.9 2.2 2.5 2.7 3.0 3.2 3.4 3.5 3.7 3.8 4.0 4.1 4.2 4.4 4.5 4.6 4.7
20 1.4 1.8 2.1 2.4 2.6 2.9 3.1 3.2 3.4 3.5 3.7 3.8 3.9 4.1 4.2 4.3 4.4 4.5
21 1.4 1.7 2.0 2.3 2.5 2.8 3.0 3.1 3.3 3.4 3.6 3.7 3.8 4.0 4.1 4.2 4.3 4.4
22 1.3 1.7 1.9 2.2 2.4 2.7 2.9 3.0 3.2 3.3 3.5 3.6 3.7 3.9 4.0 4.1 4.3 4.3
23 1.3 1.6 1.9 2.1 2.4 2.6 2.8 2.9 3.1 3.3 3.4 3.5 3.6 3.7 3.9 4.0 4.1 4.2
24 1.2 1.5 1.8 2.1 2.3 2.5 2.7 2.8 3.0 3.2 3.3 3.4 3.5 3.6 3.8 3.9 4.0 4.0
25 1.2 1.5 1.7 2.0 2.2 2.4 2.6 2.8 2.9 3.1 3.2 3.3 3.4 3.5 3.7 3.8 3.9 3.9
10 2.2 2.7 3.2 3.6 3.9 4.2 4.4 4.6 4.8 5.0 5.1 5.3 5.5 5.6 5.8 5.9 6.1 6.2
11 2.1 2.6 3.0 3.4 3.7 4.0 4.2 4.4 4.6 4.8 4.9 5.1 5.3 5.4 5.6 5.7 5.9 6.0
12 2.0 2.5 2.9 3.3 3.6 3.8 4.1 4.2 4.4 4.6 4.8 4.9 5.1 5.2 5.4 5.5 5.7 5.8
13 1.9 2.4 2.8 3.1 3.4 3.7 3.9 4.1 4.3 4.4 4.6 4.7 4.9 5.1 5.2 5.3 5.5 5.6
14 1.8 2.2 2.7 3.0 3.2 3.5 3.7 3.9 4.1 4.2 4.4 4.5 4.7 4.9 5.0 5.1 5.3 5.4
15 1.7 2.1 2.5 2.8 3.1 3.3 3.6 3.7 3.9 4.1 4.2 4.4 4.5 4.7 4.8 4.9 5.1 5.2
16 1.7 2.0 2.4 2.7 3.0 3.2 3.5 3.6 3.8 4.0 4.1 4.2 4.4 4.5 4.6 4.8 4.9 5.1
17 1.6 2.0 2.3 2.6 2.9 3.1 3.3 3.5 3.7 3.8 4.0 4.1 4.2 4.4 4.5 4.6 4.8 4.9
18 1.5 1.9 2.2 2.5 2.7 3.0 3.2 3.4 3.6 3.7 3.8 4.0 4.1 4.3 4.4 4.5 4.6 4.7
19 1.4 1.8 2.1 2.4 2.6 2.9 3.1 3.3 3.4 3.6 3.7 3.9 4.0 4.1 4.2 4.3 4.5 4.6
20 1.4 1.7 2.0 2.3 2.5 2.8 3.0 3.2 3.3 3.5 3.6 3.7 3.8 4.0 4.1 4.2 4.3 4.4
21 1.3 1.7 2.0 2.2 .24 2.7 2.9 3.1 3.2 3.4 3.5 3.6 3.7 3.9 4.0 4.1 4.2 4.3
22 1.3 1.6 1.9 2.1 2.4 2.6 2.8 3.0 3.1 3.3 3.4 3.5 3.6 3.8 3.9 4.0 4.1 4.2
23 1.2 1.5 1.8 2.1 2.3 2.5 2.7 2.9 3.0 3.2 3.3 3.4 3.5 3.6 3.8 3.9 4.0 4.1
24 1.2 1.5 1.7 2.0 2.2 2.4 2.6 2.8 2.9 3.1 3.2 3.3 3.4 3.5 3.7 3.8 3.9 3.9
25 1.1 1.4 1.7 1.9 2.1 2.3 2.5 2.7 2.8 3.0 3.1 3.2 3.3 3.4 3.6 3.7 3.8 3.8
26 1.1 1.4 1.7 1.9 2.1 2.3 2.5 2.7 2.8 3.0 3.1 3.2 3.3 3.4 3.6 3.7 3.8
26 1.1 1.4 1.6 1.9 2.1 2.3 2.5 2.6 2.7 2.9 3.0 3.1 3.2 3.3 3.5 3.6 3.7
3.7
3.8
27 1.1 1.4 1.6 1.9 2.1 2.3 2.4 2.6 2.8 2.9 3.0 3.1 3.2 3.3 3.5 3.6 3.7 3.7
28 1.1 1.3 1.6 1.8 2.0 2.2 2.4 2.6 2.7 2.8 2.9 3.0 3.2 3.3 3.4 3.5 3.6 3.7
29 1.0 1.3 1.5 1.7 1.9 2.1 2.3 2.4 2.6 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6
30 1.0 1.2 1.5 1.7 1.9 2.1 2.2 2.4 2.5 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5
27 1.0 1.3 1.6 1.8 2.0 2.2 2.4 2.5 2.7 2.8 2.9 3.1 3.2 3.3 3.4 3.5 3.6 3.6
28 1.0 1.3 1.5 1.7 1.9 2.1 2.3 2.5 2.6 2.7 2.8 3.0 3.1 3.2 3.3 3.4 3.5 3.6
29 1.0 1.2 1.5 1.7 1.9 2.1 2.2 2.4 2.5 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5
30 0.9 1.2 1.4 1.6 1.8 2.0 2.2 2.3 2.4 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4
Download from Www.Somanuals.com. All Manuals Search And Download.
Recold JW Series Fluid Cooler Ratings
/
/
10
TABLE NO. 3: Selection Parameters
Do not exceed the minimum and maximum flow rates given for each unit in column 2. Model JWH high flow rate units available only for models
shown. Extrapolation of flow rating should not exceed the flow range printed for each unit.
Unit Load Factors
GPM
Model No.
Min-Max
1.0
1.5
140
174
181
210
245
274
305
355
452
2.0
96
2.5
70
3.0
53
3.5
41
4.0
34
39
43
48
57
68
82
4.2
32
36
40
44
53
63
76
4.5
28
32
35
39
46
55
66
79
98
5.0
24
27
29
32
37
45
54
65
79
5.5
21
23
25
28
31
37
44
54
65
6.0
18
21
22
24
27
31
37
45
54
6.5
7.0
7.5
8.0
JWL
JW
JWL
JW
JWL
JW
JWL
JW
JWL
JW
JWL
JW
JWL
JW
JWL
JW
10-35
36-126
21-62
63-252
21-62
63-252
26-77
78-312
26-77
78-312
33-94
95-396
33-94
95-396
33-94
10A
10B
10C
15B
15C
25A
25B
25C
35A
16
15
14
13
241
260
325
355
382
420
482
610
115
127
145
175
200
222
265
340
83
63
49
93
69
54
20
23
105
126
149
169
200
259
78
60
94
73
113
131
156
197
87
102
123
155
31
38
45
98
90
33
39
95-396
41-119
JWL
JW
122
112
120-492
41-119
120-425
426-550
41-119
120-425
426-550
50-149
150-550
50-149
150-425
426-650
50-149
150-425
426-650
70-209
210-690
691-850
70-209
210-575
576-850
100-209
210-590
591-1000
100-209
210-590
591-1000
100-249
250-650
651-1700
100-200
201-559
600-1700
100-202
203-600
601-1700
100-185
186-500
501-1700
100-190
191-550
551-1700
100-199
200-500
501-1700
JWL
JW
35B
535
410
315
245
190
150
138
120
96
79
65
55
47
41
JWH
JWL
JW
JWH
JWL
JW
35C
50A
50B
610
685
720
470
515
550
365
390
425
282
300
330
221
235
260
174
185
209
161
170
192
140
147
167
113
118
135
92
97
76
80
92
64
68
77
55
58
66
48
51
57
42
45
50
JWL
JW
110
JWH
JWL
JW
JWH
JWL
JW
50C
70B
760
880
585
705
455
550
355
430
505
565
640
660
710
775
840
905
980
281
340
400
445
510
540
590
640
695
745
805
225
270
318
360
430
445
485
530
570
615
665
207
248
293
332
398
408
443
482
525
560
607
181
215
256
290
350
370
400
440
470
505
545
147
175
208
240
285
300
330
360
390
415
445
121
143
170
200
240
250
263
299
320
340
370
101
118
140
165
202
205
222
245
265
280
300
85
72
63
55
65
100
118
140
170
176
185
202
220
230
250
85
74
JWH
JWL
JW
70C
1005
1090
825
645
101
119
142
147
154
170
185
190
200
88
78
JWH
JWL
JW
85B
900
740
105
125
131
144
159
172
177
188
92
JWH
JWL
JW
85C
1080
1080
1170
1250
1370
1470
1600
805
107
110
122
136
149
154
165
JWH
JWL
JW
JWH
JWL
JW
JWH
JWL
JW
JWH
JWL
JW
JWH
JWL
JW
JWH
JWL
JW
100B
100C
115B
115C
130B
130C
1701
1805
1895
1405
1505
1580
1700
1780
1890
850
910
995
1060
1150
1250
JWH
Download from Www.Somanuals.com. All Manuals Search And Download.
Recold JW Series Fluid Cooler Pressure Drop
/
/
11
TABLE NO. 4: Pressure Drop in PSI
For feet of head, multiply by 2.31.
Model JW - JWL - JWH
GPM
10A 10B 10C
15B
15C
25A 25B
25C
35A 35B
35C
50A 50B
50C
70B
70C
85B
85C 100B 100C 115B 115C 130B 130C
10
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
1.1
3.5
5.2
6.9
9.1
1.7
2.1
2.5
3.0
3.6
4.0
4.5
5.0
5.6
6.3
6.9
7.7
0.7
1.1
1.5
1.0
2.4
3.0
3.6
4.3
5.0
1.0
1.2
1.4
1.5
1.7
1.9
2.1
2.2
0.9
1.3
1.8
2.3
2.9
3.6
4.3
5.0
5.9
1.3
1.4
1.6
1.8
2.0
2.2
2.4
2.7
3.2
3.8
4.3
4.9
5.6
6.3
7.1
0.8
1.1
1.5
1.8
2.3
2.7
3.2
3.7
4.3
4.7
5.4
1.1
1.2
1.3
1.5
1.6
1.9
2.2
2.6
2.9
3.2
3.7
4.1
4.5
5.0
5.4
1.0
1.3
1.8
2.2
2.8
3.3
3.9
4.6
5.2
5.8
6.5
1.3
1.4
1.6
1.7
1.9
2.2
2.6
3.0
3.4
3.8
4.3
4.8
5.3
5.9
6.4
7.9
0.7
0.9
1.1
1.4
1.6
1.9
2.2
2.6
2.9
3.3
3.7
4.2
4.5
0.8
0.9
1.1
1.2
1.4
1.6
1.8
2.1
2.3
2.5
2.8
3.1
3.8
4.5
0.8
1.0
1.4
1.8
2.1
2.5
4.8
3.4
3.7
4.2
4.8
5.4
5.8
1.0
1.1
1.3
1.6
1.8
2.0
2.3
2.6
2.9
3.2
3.5
3.9
4.8
5.8
6.8
7.8
1.1
1.4
1.7
2.1
2.6
3.0
3.4
4.1
4.5
5.2
5.9
6.5
6.9
1.3
1.4
1.6
1.9
2.2
2.5
2.8
3.2
3.5
3.9
4.2
4.6
5.8
6.9
8.2
9.5
0.7
0.9
1.0
1.2
1.5
1.7
1.9
2.2
2.5
2.8
3.2
3.5
3.8
4.2
4.8
1.1
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.6
3.2
3.9
4.7
5.4
0.9
1.1
1.3
1.6
1.9
2.3
2.6
2.9
3.4
4.7
4.2
4.6
5.0
5.4
6.3
1.3
1.5
1.7
1.9
2.2
2.5
2.7
3.0
3.2
4.0
4.8
5.7
6.7
1.1
1.3
1.6
1.9
2.3
2.7
3.1
3.5
4.0
4.3
5.0
5.4
6.1
6.5
7.8
1.6
1.8
2.1
2.3
2.6
2.9
3.2
3.5
3.9
4.8
5.8
6.8
7.8
0.7
0.9
1.1
1.3
1.5
1.7
1.9
2.2
2.5
2.8
3.0
3.3
3.6
4.3
5.0
5.6
6.5
1.4
1.6
1.8
1.9
2.2
2.4
3.0
3.5
4.2
4.9
1.0
1.2
1.4
1.7
1.9
2.2
2.6
2.9
3.2
3.6
3.9
4.3
4.8
5.6
6.5
7.4
1.2
1.5
1.8
2.1
2.4
2.8
3.1
3.5
4.0
4.5
4.8
5.4
5.8
6.9
8.0
9.1
1.5
1.7
1.8
2.0
2.2
2.4
2.6
3.1
3.5
4.2
1.8
2.1
2.3
2.5
2.8
3.1
3.3
3.8
4.5
5.2
5.8
6.5
7.3
8.5
3.0
3.5
4.0
4.6
5.2
5.9
6.5
7.1
3.7
4.3
5.0
5.7
6.4
7.2
8.0
8.9
9.8
1.7
2.1
2.4
2.7
3.1
3.5
4.0
4.4
4.9
2.4
2.8
3.3
3.8
4.3
4.9
5.4
6.0
6.6
7.3
2.1
2.4
2.7
3.0
3.7
4.4
4.9
5.4
6.0
6.5
7.0
1.7
2.2
2.6
3.1
3.9
5.1
6.1
7.4
8.7
9.9
1.9
2.2
2.5
2.7
3.1
3.5
3.7
4.2
5.1
5.8
6.7
7.7
2.9
3.5
4.0
4.6
5.2
5.8
6.5
7.3
8.0
1.3
1.7
2.1
2.6
3.2
3.8
4.9
6.2
7.5
9.1
1.2
1.4
1.6
1.8
2.0
2.3
2.6
2.9
3.1
3.4
4.1
4.8
5.5
6.4
7.2
2.6
3.0
3.5
4.0
4.6
5.2
5.8
6.5
7.1
3.4
4.1
4.7
5.4
6.1
6.9
7.7
110 10.0 2.8
120 11.8 3.3
130 13.5 3.8
140
150
160
170
180
190
4.3
4.8
5.4
6.1
6.7
7.4
8.3 10.4 4.6
1.7
1.9
2.2
2.4
2.6
2.9
3.6
4.3
5.2
6.1
7.9
2.1
2.3
2.6
2.8
3.2
3.5
4.3
5.2
6.2
7.2
5.1
5.7
6.3
7.0
8.1
8.9
9.8
8.6
9.4
7.8
8.5
9.3
7.8
7.6
8.6 10.7 5.3
7.8 10.3
200
225
250
275
300
350
400
450
500
550
600
650
700
750
800
850
900
950
1000
1100
1200
1300
1400
1500
1600
1700
8.0
8.2 10.5 9.4 11.7 5.7
7.9
1.4
1.8
2.2
2.7
3.2
4.3
5.4
6.6
8.1
9.4
1.9
1.2
2.5
2.8
3.1
3.5
3.9
4.3
4.7
5.5
6.6
7.4
1.8
2.3
2.8
3.4
4.1
5.2
6.5
8.1
9.6
1.4
1.7
1.9
2.1
2.4
2.7
3.0
3.3
3.6
4.0
4.6
5.4
6.0
7.0
10.1 11.6 6.7
12.1 13.9 8.2
2.0
2.3
2.8
3.3
3.8
2.4
2.9
3.4
3.9
4.6
5.3
6.4
7.7
9.2
2.5
2.8
3.2
3.6
4.0
4.4
1.9
2.3
2.7
3.1
4.0
5.1
6.2
7.4
2.0
2.6
3.1
3.6
4.7
5.9
7.1
7.1
1.9
2.3
2.7
3.5
4.4
5.3
6.4
1.8
2.2
2.7
3.2
4.3
5.4
6.6
8.1
9.4
1.2
1.4
1.6
1.8
2.0
2.3
2.5
2.8
3.0
3.6
4.3
5.0
5.5
6.4
7.0
9.5
9.9 11.3 5.4
11.5 13.0 6.4
15.6 17.7 8.4 10.4 12.6 7.3
10.6 13.0 15.6 9.2
8.3 10.4 6.5
9.4
9.5
2.8
3.3
4.0
6.8
8.3
9.9
8.5 10.3 4.3
2.0
2.3
11.6 2.3
14.3 2.7
3.1
3.1
3.7
4.3
5.0
5.7
5.2
6.3
7.5
8.6
9.9
1.9
2.1
2.4
2.7
8.5
4.6 12.0 2.7
8.7 10.0 7.5
3.1
3.6
1.7
2.0
2.2
2.5
2.8
3.1
3.4
3.8
4.1
2.9
3.3
3.7
4.2
4.7
5.2
6.0
6.4
7.0
8.8
9.9
2.0
2.3
2.5
2.7
3.1
3.4
3.7
4.5
5.2
6.1
6.9
7.9
8.5
9.6
8.6
9.5
8.0
8.8
9.8
8.0 11.1 9.0
8.0 10.8 9.0 12.1 10.0
TABLE NO. 5: Ethylene Glycol Flow conversion
Note: For ethylene glycol pressure drop calculation, the
conversion factor fromTable 5 must be applied to
design flow before enteringTable 4.
Ethylene Glycol % by Volume
Factor
20%
30%
40%
50%
1.04
1.05
1.05
1.06
Download from Www.Somanuals.com. All Manuals Search And Download.
Recold JW Series Fluid Cooler Accessories
/
/
12
PUMP STRAINER
CAPACITY CONTROLS
Pump intake extension and a cleanable non-ferrous pump strainer in
an easy access location is available.
Dual Fan Motors—The dual fan motor package is available as
a proven energy saving capacity control option. It consists of
furnishing a high efficiency motor, a 1200 RPM, low speed motor,
two sets of drives and belts, extended fan shaft and motor bases
on opposite sides of the blower. A UL control-starter panel is
available as a completely wired package for one point connection.
MODIFICATIONSTO WATER DISTRIBUTION SYSTEM
Various package are available to provide manual or automatic
change-over as a backup system in the event of a spray pump
failure
Variable Speed Drive—A Variable Speed Drive automatically
minimize the tower’s noise level during periods of reduced load
and/or reduced ambient temperature without sacrificing the
system’s ability to maintain a constant cold water temperature. This
is a relatively inexpensive solution, and can pay for itself quickly in
reduced energy costs.
PAN HEATER
The use of a remote sump tank located indoors is a common form
of pan water freeze protection for evaporative cooling equipment.
However, for those installations which will not allow this type of
system, freeze protection may be provided by electric immersion
heaters or steam or hot water coils installed in the pan.
Electric Damper Controls—An electric damper control package
is available as an accessory for modulating the internal damper
system. A proportional solid state actuator is factory mounted
below the fan scroll and attached to the damper shaft by
connecting linkage. A sensing bulb connected to the actuator by
a capillary tube is normally mounted in the unit pan water basin
for monitoring the system. However, when specified, a pressure
control may be supplied for field mounting to allow direct head
pressure control. An end switch located inside the motor actuator
may be adjusted to cycle the fan motor on for pressure rise and off
when dampers close.
The electric heater package consists of immersion heaters installed
in the pan to provide efficient even heat distribution. Standard
heaters are selected to provide approximately 40°F pan water at
-10°F ambient temperature. A low water cutout switch is supplied
to prevent heater operation when the elements are not completely
submerged. The heaters are monitored by a sump thermostat
with remote sensing bulb located in the pan water. All heaters and
controls are factory installed for field wiring by others.
NOTE: Pan heater packages are designed to prevent pan water
freezing during unit shutdown with fans and pump idle.
COIL CASING INSULATION
CAPACITY BOOSTER COIL
In order to further reduce the heat loss from the unit coil, insulation
factory installed on exterior coil panels is available. A protective
coat of paint is applied to the insulation for protection from the
weather elements.
A finned coil mounted on top of the eliminator section is available
primarily for applications with high entering fluid temperatures
or for applications where dry operation under low entering air
temperatures is anticipated. Copper tube with aluminum or copper
fin coils are available.
POSITIVE CLOSURE DAMPERS
Many times during unit shutdown with fan and pump off, it is
desirable to conserve the amount of heat loss from the process
fluid. For those applications, closure dampers are available for this
installation at the air discharge of the fluid cooler. The damper
package is designed to prevent convective air flow through the
idle unit thus minimizing the heat loss. Installation of the closure
dampers requires all wiring to be completed in the field. An electric
actuator is factory mounted, however controls are to be supplied by
others. The damper actuator should be wired into the field control
system to allow the dampers to fully open when the fan cycles on
and close when the fan cycles off. The actuator requires a 115V
power supply
VIBRATION ISOLATORS
Spring type vibration isolator rails may be supplied for field
installation, most units will require an intermediate rigid steel
framework between the isolators and the base of the unit to
provide adequate structural support for the unit. Consult Recold
sales representative for recommendations on any vibration isolation
application.
STAINLESS STEEL CONSTRUCTION
300 stainless steel construction is offered as an option for sump
pan and upper casing panels.
ELECTRONIC WATER LEVEL CONTROL
The electronic water level control package provides a constant
and accurate means of monitoring water level in the unit. For this
reason, it is often recommended for those installations which
require year round operation in low ambient conditions.
The complete package includes an electric float switch with stilling
chamber which is factory installed in the pan section of the unit.
An electric solenoid valve for water make-up is shipped loose for
remote installation. All wiring must be provided in the field by
others.
RECOLD PRODUCTS
550 W MERCURY LANE
BREA, CALIFORNIA 92821
UNITED STATES
704 529 6080
spxcooling.com
In the interest of technological progress,
all products are subject to design and/or
material change without notice.
©2008 SPX Cooling Technologies, Inc.
Printed in USA | RECOLD JW-TECH-08
Download from Www.Somanuals.com. All Manuals Search And Download.
|