Cal. 7T62
INSTRUCTIONS
(P.
3)
BEDIENUNGSANLEITUNG
INSTRUCTIONS
ISTRUZIONI
(S. 20)
(P. 37)
(P. 54)
(P. 71)
(P. 88)
(105 頁)
INSTRUCCIONES
INSTRUÇÕES
用法説明
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Page
SETTING THE TIME AND ADJUSTING THE STOPWATCH HAND POSITION ........
SETTING THE DATE ................................................................................................
5
9
STOPWATCH ........................................................................................................... 10
SINGLE-TIME ALARM ............................................................................................. 12
TACHYMETER ......................................................................................................... 15
BATTERY CHANGE .................................................................................................. 17
SPECIFICATIONS..................................................................................................... 19
✩ For the care of your watch, see “TO PRESERVE THE QUALITY OF YOUR
WATCH” in the attached Worldwide Guarantee and Instruction Booklet.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CAL. 7T62
✩ TIME/CALENDAR
✩ STOPWATCH
Measures up to 60 minutes in 1/5 second
increments.
Split time measurement is possible.
✩ SINGLE-TIME ALARM
Can be set to ring only once at a
designated time within the coming 12
hours.
STOPWATCH minute hand
STOPWATCH 1/5-second hand
Minute hand
Hour hand
A
Date
6
CROWN
Small second hand
ALARM hour hand
a
b
c
a: Normal position
b: First click
c: Second click
B
ALARM minute hand
Download from Www.Somanuals.com. All Manuals Search And Download.
4
SETTING THE TIME AND
ADJUSTING THE STOPWATCH HAND POSITION
✩ This watch is so designed that the following are all made with the crown at the second click
position:
1) main time setting
2) alarm hand adjustment
3) stopwatch hand position adjustment
Once the crown is pulled out to the second click, be sure to check and adjust 1) and 2) at the
same time. If needed, 3) should also be adjusted then.
CROWN
Pull out to second click when the second hand is at the 12 o’clock position.
1. MAIN TIME SETTING
Minute hand
Hour hand
CROWN
Turn to set the hour and
minute hands.
Small
second
hand
5
Download from Www.Somanuals.com. All Manuals Search And Download.
1. When the stopwatch is or has been measuring, if the crown is pulled out to the second click, it will
automatically reset the STOPWATCH hands to “0”.
2. If the alarm has been set and the crown is pulled out to the second click, the ALARM hands will turn
to indicate the current time.
3. It is recommended that the hands be set to the time a few minutes ahead of the current time, taking
into consideration the time required to set the ALARM hands and to adjust the STOPWATCH hand
position if necessary.
4. When setting the hour hand, be sure to check that AM/PM is correctly set. The watch is so designed
that the date changes once in 24 hours.
5. When setting the minute hand, first advance it 4 to 5 minutes ahead of the desired time and then turn
it back to the exact minute.
2. ALARM HAND ADJUSTMENT
Minute hand
Hour hand
✩ Set the ALARM hands to the time the main
time hands indicate.
Press repeatedly to set ALARM
hands to the time indicated by the
main time hands.
B
* The ALARM hands move quickly if
button B is kept pressed.
B
ALARM
hour hand
ALARM minute hand
Download from Www.Somanuals.com. All Manuals Search And Download.
6
3. STOPWATCH HAND POSITION ADJUSTMENT
✩ If the STOPWATCH hands are not in the “0”
position, follow the procedure below to set them
to the “0” position.
STOPWATCH
1/5-second hand
Press for 2 seconds.
A
STOPWATCH
minute hand
* STOPWATCH minute hand turns a full circle.
✩
A
Press repeatedly to set STOPWATCH
minute hand to the “0” position.
B
* The hand moves quickly if button B is kept
pressed.
✩
B
Press for 2 seconds.
A
* STOPWATCH 1/5-second hand turns a full
circle.
✩
Press repeatedly to set STOPWATCH
1/5-second hand to the “0” position.
B
* The hand moves quickly if button B is kept
pressed.
✩
7
Download from Www.Somanuals.com. All Manuals Search And Download.
✩
✩ ALARM and STOPWATCH hands can be readjusted in the following order by
pressing button
for 2 seconds.
A
STOPWATCH
minute hand
STOPWATCH
1/5-second hand
ALARM hands
*
ALARM hands
*
STOPWATCH minute
hand turns a full circle.
*
STOPWATCH 1/5-
second hand turns a
full circle.
advance 12 hours.
▲
* After all the adjustments are completed,
check that the main time and alarm hands
indicate the same time.
✩
CROWN
Push back in to normal position in
accordance with a time signal.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
SETTING THE DATE
✩ Before setting the date, be sure to set the main time.
CROWN
Pull out to first click.
✩
✩
6
Turn clockwise until the desired date
appears.
✩
✩
Push back in to normal position.
Date
1. It is necessary to adjust the date at the end of February and 30-day months.
2. Do not set the date between 9:00 p.m. and 1:00 a.m. Otherwise, the date may not change properly.
3. Do not press button B when the crown is at the first click position, as this will move the ALARM hands.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
STOPWATCH
✩ The stopwatch can measure up to 60 minutes in 1/5-second increments.
✩ After 60 minutes, it will start counting again from “0” repeatedly up to 12 hours.
STOPWATCH minute hand
A
STOPWATCH
1/5-second hand
B
✩ Before using the stopwatch, be sure to check that the crown is set at the normal
position and that the STOPWATCH hands are reset to the “0” position.
*
If the STOPWATCH hands do not return to the “0” position when the stopwatch is reset to “0”, follow the
procedure in “SETTING THE TIME AND ADJUSTING THE STOPWATCH HAND POSITION”.
Standard measurement
A
A
B
START
STOP
RESET
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Accumulated elapsed time measurement
A
START
A
STOP
A
A
STOP
B
RESET
RESTART
* Restart and stop of the stopwatch can be repeated by pressing button A.
Split time measurement
A
START
B
SPLIT
B
A
STOP
B
RESET
SPLIT
RELEASE
* Measurement and release of split time can be repeated by pressing button B.
Measurement of two competitors
A
START
B
A
B
B
RESET
FINISH TIME
OF 1ST
2ND
FINISH TIME
OF 2ND
COMPETITOR
FINISHES
COMPETITOR
COMPETITOR
11
Download from Www.Somanuals.com. All Manuals Search And Download.
SINGLE-TIME ALARM
✩ The alarm can be set to ring only once at a designated time within the coming 12 hours.
✩ The alarm time can be set in one minute increments.
ALARM TIME SETTING
✩ Before using the alarm, check that the ALARM hands are adjusted to the current time. (See
“SETTING THE TIME AND ADJUSTING THE STOPWATCH HAND POSITION”)
CROWN
Pull out to first click.
✩
✩
Press repeatedly to set the de-
sired alarm time.
B
✩
* The ALARM hands move quickly if
button B is kept pressed.
✩
B
CROWN
Push back in to normal posi-
tion.
ALARM
hour hand
ALARM minute hand
* The alarm is automatically engaged.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
1. The single-time alarm cannot be set for a time more than 12 hours ahead of the current time. While
you keep button B pressed to advance the ALARM hands quickly, they stop when they indicate the
current time and the alarm is disengaged. In that case, release button B, and then, press and hold
the button again to set the ALARM hands to the desired time.
2. While the crown is at the normal position, the ALARM hands indicate the current time when the alarm
is disengaged and the designated alarm time when it is engaged.
✩ HOW TO STOP THE ALARM
At the designated time the alarm rings for 20 seconds, and it is automatically disengaged
as it stops. To stop it manually, press button A or B.
1. While the stopwatch is measuring, the alarm rings differently than usual. However, this is not a
malfunction.
2. While the alarm is ringing, pressing button A or B will only stop the alarm, and no stopwatch
operation can be made.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
✩ HOW TO CANCEL THE ALARM TIME YOU HAVE SET
CROWN
Pull out to first click.
✩
✩
Press and hold until ALARM
hands stop and indicate the cur-
rent time.
B
✩
✩
CROWN
Push back in to normal posi-
tion.
B
* To correct the alarm time you have set, follow the procedure described in “ALARM TIME SETTING”.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
TACHYMETER
(for models with tachymeter scale on the dial)
To measure the hourly average speed of a vehicle
Ex. 1
1
Use the stopwatch to determine
how many seconds it takes to go
1 km or 1 mile.
STOPWATCH
second hand:
40 seconds
2
Tachymeter scale indicated by
STOPWATCH second hand gives
the average speed per hour.
Tachymeter scale: “90”
“90” (tachymeter scale figure) x 1 (km or mile)
= 90 km/h or mph
✩ Tachymeter scale can be used only when the time required is less than 60 seconds.
Ex. 2: If the measuring distance is extended to 2 km or miles or shortened to 0.5 km or miles
and STOPWATCH second hand indicates “90” on tachymeter scale:
“90” (tachymeter scale figure) x 2 (km or mile) = 180 km/h or mph
“90” (tachymeter scale figure) x 0.5 (km or mile) = 45 km/h or mph
15
Download from Www.Somanuals.com. All Manuals Search And Download.
To measure the hourly rate of operation
Ex. 1
1
Use the stopwatch to measure
the time required to complete 1
job.
STOPWATCH
second hand:
20 seconds
2
Tachymeter scale indicated by
STOPWATCH second hand gives
the average number of jobs ac-
complished per hour.
Tachymeter scale: “180”
“180” (tachymeter scale figure) x 1 job
= 180 jobs/hour
Ex. 2: If 15 jobs are completed in 20 seconds:
“180” (tachymeter scale figure) x 15 jobs = 2700 jobs/hour
Download from Www.Somanuals.com. All Manuals Search And Download.
16
BATTERY CHANGE
The miniature battery which powers your watch should last approximately
3
Years
3 years. However, because the battery is inserted at the factory to check
the function and performance of the watch, its actual life once in your
possession may be less than the specified period. When the battery expires,
be sure to replace it as soon as possible to prevent any malfunction. For
battery replacement, we recommend that you contact an AUTHORIZED
SEIKO DEALER and request SEIKO SR927W battery.
* If the stopwatch is used for more than 2 hours a day and/or the alarm rings for more
than 20 seconds a day, the battery life may be less than the specified period.
* After the battery is replaced with a new one, set the time/calendar and alarm and
adjust the stopwatch hand position.
✩ Battery life indicator
When the battery nears its end, the small second hand moves at two-second intervals
instead of normal one-second intervals. In that case, have the battery replaced with a new
one as soon as possible.
* While the small second hand is moving at two-second intervals, the alarm will not ring even if it is
engaged. This is not a malfunction.
* The watch remains accurate while the small second hand is moving at two-second intervals.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
✩ Do not remove the battery from the watch.
✩ If it is necessary to take out the battery, keep it out of the reach of children. If
a child swallows it, consult a doctor immediately.
CAUTION
✩ Never short-circuit, heat or otherwise tamper with the battery, and never
expose it to fire. The battery may burst, become very hot or catch fire.
✩ The battery is not rechargeable. Never attempt to recharge it, as this may cause
battery leakage or damage to the battery.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
SPECIFICATIONS
1
Frequency of crystal oscillator .................. 32,768 Hz (Hz = Hertz … Cycles per second)
2
Loss/gain (monthly rate) ............................ ±15 seconds at normal temperature range (5° C ~ 35° C)
(41° F ~ 95° F)
3
4
5
6
Accuracy of the alarm ............................... ±1 minute
Operational temperature range ................. –10° C ~ +60° C (14° F ~ 140° F)
Driving system .......................................... Step motor, 4 pieces
Display system
Time/calendar ....................................... Hour, minute and small second hands
Date is displayed in numerals.
Stopwatch ............................................ Measures up to 60 minutes.
Stopwatch minute and 1/5-second hands
Single-time alarm ................................. Alarm hour and minute hands
Battery ...................................................... SEIKO SR927W, 1 piece
IC (Integrated Circuit) ................................ C-MOS-IC, 1 piece
7
8
* The specifications are subject to change without prior notice for product improvement.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
|