Cal. 6M25, 6M26
INSTRUCTIONS
(P.
3)
INSTRUCTIONS
INSTRUCCIONES
BEDIENUNGSANLEITUNG
ISTRUZIONI
(P. 30)
(P. 58)
(S. 86)
(P. 114)
(P. 143)
(171 頁)
INSTRUÇÕES
用法説明
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Page
FEATURES ..................................................................................................................
MODES AND DISPLAYS ............................................................................................
ADJUSTING THE HAND AND DATE POSITIONS .......................................................
TIME SETTING ............................................................................................................
CALENDAR .................................................................................................................
ALARM .......................................................................................................................
TIMER .........................................................................................................................
STOPWATCH ..............................................................................................................
TACHYMETER ............................................................................................................
NECESSARY PROCEDURE AFTER BATTERY CHANGE ............................................
NOTES ON OPERATING THE WATCH .......................................................................
BATTERY LIFE INDICATOR ........................................................................................
BATTERY CHANGE .....................................................................................................
TO PRESERVE THE QUALITY OF YOUR WATCH......................................................
SPECIFICATIONS ........................................................................................................
4
5
7
9
10
11
13
15
18
20
22
24
24
26
29
Download from Www.Somanuals.com. All Manuals Search And Download.
3
SEIKO ANALOGUE QUARTZ
Cal. 6M25, 6M26
FEATURES
TIME
TIMER
● Hour, minute & second hands
● Up to 60 minutes can be set in
minute increments.
CALENDAR
STOPWATCH
● Measures up to 60 minutes in 1/10
● Date displayed in numerals
● Month indicated by hands
● Calendar adjusts automatically
except February of leap years.
second increments.
TACHYMETER
● For models with tachymeter scale
ALARM
● Can be set to ring on a 12-hour
basis.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
MODES AND DISPLAYS
There are two buttons and a crown.
[Cal. 6M25]
[Cal. 6M26]
Hour hand
Hour hand
Minute hand
Date
Minute hand
Date
B
B
a b
a
b
5
5
A
A
Second hand
Second hand
CROWN
CROWN
MODE INDICATOR
MODE INDICATOR
a: Normal position
b: Extended position
Download from Www.Somanuals.com. All Manuals Search And Download.
5
MODE CHANGE
CROWN Turn at normal position clockwise or counterclockwise.
TIME mode
(Alarm disengaged)
TIME mode
(Alarm engaged)
➡
Pull out
CROWN.
Time
setting
Time
setting
➡
Pull out
CROWN.
STOPWATCH mode
➡
Pull out
CROWN.
ALARM SETTING mode
Adjusting
hand & date
positions
CALENDAR mode
TIMER mode
➡
Calendar
setting
Pull out
CROWN.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
ADJUSTING THE HAND AND DATE POSITIONS
● Before setting the time and calendar, be sure to use STOPWATCH mode to check
the positions of Hour, Minute and Second hands and the date numeral.
Turn to set MODE INDICATOR to “CHRONO.”.
CROWN
* If the stopwatch is counting, first press Button B
to stop measurement and then pressButton A to
reset the hands.
HOW TO RESET THE HAND AND DATE POSITIONS
● If the hands do not return to the 12 o’clock position or the date numeral does not
appear at the center of the calendar frame, reset them following the procedure
below. If they do not need resetting, go on to the next section (“TIME SETTING”).
CROWN Pull out.
➠
10
CROWN
▼
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Press to select what is to be ad-
justed (hands or date) in the fol-
lowing order (See *1 on page 22) :
B
B
A
Second hand
Minute hand
▲
10
▲
Date
Hour hand
Calendar
frame
▼
Press to reset the selected hand
to the 12 o’clock position or put
the date to the center of the cal-
endar frame. (See *2 on page 22)
A
➠
▼
10
Push back in to normal position.
CROWN
CROWN
Download from Www.Somanuals.com. All Manuals Search And Download.
8
TIME SETTING
Turn to set MODE INDICATOR to “TIME” or
“ALM.ON”.
CROWN
Second
hand
CROWN
Pull out.
➠
* Second hand automatically
returns to the 12 o’clock
position.
5
CROWN
▼
Press to set Minute hand. (See *2
and *3 on page 22)
Hour hand
B
B
A
➠
▼
Press to set Hour hand. (See *2
and *4 on page 22)
5
A
▼
CROWN
Push back in to normal position
CROWN
Minute hand
in accordance with a time signal.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
CALENDAR
● Themonthisindicatedbythehourmarkerthatallthreehandspointto.
● Thedateisindicatedbythenumeralshowninthecalendarframe.
● ThecalendarautomaticallyadjustsforoddandevenmonthsexceptFebruaryofleapyears.
Turn to set MODE INDICATOR to “DATE”.
CROWN
CALENDAR SETTING
CROWN
▼
Pull out.
B
➠
Press to set the month (Ex. De-
cember). (See *2 on page 22)
5
B
▼
A
CROWN
Press to set the date (Ex. 10th).
(See *2 on page 22)
A
Month
[Ex.: December]
▼
Push back in to normal position.
CROWN
➠
10
CROWN
Date
Download from Www.Somanuals.com. All Manuals Search And Download.
10
ALARM
● The alarm can be set to ring on a 12-hour basis.
ALARM SETTING
Turn to set MODE INDICATOR to “ALM.SET”. (See
*5 on page 22)
CROWN
Press to set Minute hand. (See *2
and *3 on page 22)
Minute hand
B
B
▼
Press to set Hour hand. (See *2 on
page 22)
10
CROWN
A
▼
Turn to set MODE INDICATOR to
“ALM.ON” or “TIME” to engage
or disengage the alarm. (See the
following section)
A
CROWN
Hour hand
Download from Www.Somanuals.com. All Manuals Search And Download.
11
ALARM ENGAGEMENT/DISENGAGEMENT
• Alarm engagement
• Alarm disengagement
Turn to set MODE INDI-
CATOR to “ALM.ON”.
Turn to set MODE INDI-
CATOR to “TIME”.
CROWN
CROWN
(See also *6 on page 22)
Current time
10
10
MODE INDICATOR
[TIME mode with alarm engaged]
[TIME mode with alarm disengaged]
● Alarm rings at the designated time for 20 seconds.
* To stop it manually, press Button A or B.
● To check the designated alarm time, set MODE INDICATOR to “ALM.SET”.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
TIMER
● The timer can be set to count down up to 60 minutes in minute increments.
Turn to set MODE INDICATOR to “TIMER”.
CROWN
TIMER SETTING
● Before setting the timer, check that the three hands are at “0” position.
Second hand
Press to set the desired amount
of time in minutes. (See *2 on
page 22)
A
10
* To set the timer for 60
minutes, set Minute hand
at “0” position.
A
Minute hand
Download from Www.Somanuals.com. All Manuals Search And Download.
13
TIMER OPERATION
B
➡
➡
➡
B
START
➡
B
STOP
B
B
STOP
A
RESET
10
RESTART
* Restart and stop of timer can be repeated by pressing Button B.
A
● When the set time is up, a warning sound beeps for approximately 5 seconds.
* To stop it manually, press Button A or B.
* See also *7 on page 22.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
STOPWATCH
● Stopwatch measures up to 60 minutes in 1/10 second increments.
Turn to set MODE INDICATOR to “CHRONO.”.
CROWN
● In the following cases, the stopwatch operations cannot be made:
1) While the timer warning sound is beeping (for about 5 seconds).
2) While the hands are moving quickly to catch up with the
accumulated elapsed time after the split time is released (less
than 5 seconds).
* See also *8 on page 23.
HOW TO READ THE HANDS
● In STOPWATCH mode, each hand indicates the elapsed time as follows:
In STOPWATCH mode
1/10 seconds
Seconds
In other modes
Second hand
Minute hand
Hour hand
➡
➡
➡
Minutes
Download from Www.Somanuals.com. All Manuals Search And Download.
15
• For the first 1 minute
• After the first 1 minute
Ex.: 20 and 7/10 seconds
Ex.: when measurement is
stopped or split time is
measured
Ex.: during measurement
Minute hand
1/10 second
hand*
1/10 second
hand**
1/10 second
hand***
Second hand
10
10
10
Second hand
Minute hand
Minute hand
*** When the measurement is
stopped or split time is
measured, 1/10 second
hand indicates the 1/10
seconds measured.
*
1/10 second hand moves
from 0 to 9 (minute markers)
repeatedly.
**1/10 second hand stays at
“0” position while the
stopwatch is counting.
When the measurement is
restarted or split time is
released, it returns to “0”
position.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
STOPWATCH OPERATION
● Before using the stopwatch, be sure to reset the hands to “0” position.
B
1 Standard measurement
10
B
START
B
STOP
A
RESET
A
2 Accumulated elapsed time measurement
B
START
B
STOP
B
RESTART
B
STOP
A
RESET
* Restart and stop of stopwatch can be repeated by pressing Button B.
3 Split time measurement
B
START
A
SPLIT
A
SPLIT
B
STOP
A
RESET
RELEASE
* Measurement and release of split time can be repeated by pressing Button A.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
TACHYMETER
(for models with tachymeter scale on the dial)
To measure the hourly average speed of a vehicle
1
2
Use the stopwatch to determine
how many seconds it takes to go
1 km or 1 mile.
Ex. 1
Second hand:
40 seconds
Tachymeter scale indicated by
Second hand gives the average
speed per hour.
Tachymeter scale: “90”
“90” (tachymeter scale figure) x 1 (km or mile)
= 90 km/h or mph
* Tachymeter scale can be used only when the time required is less than 60 seconds.
Ex. 2: If the measuring distance is extended to 2 km or miles or shortened to 0.5 km or miles
and Second hand indicates “90” on tachymeter scale:
“90” (tachymeter scale figure) x 2 (km or mile) = 180 km/h or mph
“90” (tachymeter scale figure) x 0.5 (km or mile) = 45 km/h or mph
Download from Www.Somanuals.com. All Manuals Search And Download.
18
To measure the hourly rate of operation
Ex. 1
1
2
Use the stopwatch to measure
the time required to complete 1
job.
Second hand:
20 seconds
Tachymeter scale indicated by
Second hand gives the average
number of jobs accomplished per
hour.
Tachymeter scale:
“180”
“180” (tachymeter scale figure) x 1 job
= 180 jobs/hour
Ex. 2: If 15 jobs are completed in 20 seconds:
“180” (tachymeter scale figure) x 15 jobs = 2700 jobs/hour
Download from Www.Somanuals.com. All Manuals Search And Download.
19
NECESSARY PROCEDURE AFTER BATTERY CHANGE
● When the battery is replaced, the information stored in the IC does not correspond
with the time and date actually displayed. Before using the watch, therefore, be sure
to reset the hands and date, following the procedure below.
CROWN Turn to set MODE INDICATOR to “CHRONO.”.
* If the stopwatch is counting, first press Button B
to stop measurement and then press Button A to
reset the hands.
Pull out.
CROWN
▼
B
Press and hold at the same time
for 2 seconds.
➠
AND
B
A
7
* A beep sounds when the
buttons are released, and the
hands start to show
demonstration movement.
A
CROWN
▼
OR
Press to stop the hands.
B
A
▼
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Press to select what is to be ad-
justed (hands or date) in the fol-
lowing order (See *1 on page 22):
B
B
A
1
Second hand
Minute hand
▲
▲
Date
Hour hand
▼
Press to reset the selected hand
to the 12 o’clock position or set
the date to “1”. (See *2 on page
22)
A
➠
1
▼
Push back in to normal position.
CROWN
CROWN
* After resetting the hands
and date as explained above,
set the time and calendar.
(See “TIME SETTING” and
“CALENDAR”)
Download from Www.Somanuals.com. All Manuals Search And Download.
21
NOTES ON OPERATING THE WATCH
*1 When a hand is selected, it will move back and forth and return to where it was.
When the date is selected, it will advance one day and return to the current date.
*2 The hand(s)/date move(s) quickly if the corresponding button is kept pressed for 2
seconds.
*3 As Minute hand moves, Hour hand also moves correspondingly.
*4 When setting Hour hand, check that AM/PM is correctly set.
•
Press Button A to turn Hour hand past the 12 o’clock marker to determine whether the watch
is set for the A.M. or P.M. period. If the date changes, the time is set for the A.M. period. If
the date does not change, the time is set for the P.M. period.
While the date is changing, Hour hand stops on the 12 o’clock position even if Button A is kept
pressed.
*5 The alarm time can be set with the CROWN both at the normal position and at the
extended position.
*6 Alarm test: With the CROWN at “ALM.ON”, press and hold Buttons A and B at
the same time.
*7 Remarks on timer operation:
•
•
•
In TIMER mode, Hour hand stops at the 12 o’clock position.
With each press of the buttons, a beep sounds for confirmation.
Even if the mode is changed from TIMER to another while the timer is counting
down, it continues counting. If the timer is stopped, however, the hands will be
reset to “0” position by changing the mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
*8 Remarks on stopwatch operation:
•
With each press of the buttons, a beep sounds for confirmation.
•
Even if the mode is changed from STOPWATCH to another while the stopwatch
is measuring, it continues counting. If the split time is measured, however, it will
be released and counting will be continued by changing the mode.
✩✩Demonstration movement of hands ✩✩
CROWN
at normal position
If Buttons A and Bare pressed at the same time for
2 seconds, Hour and Minute hands turn counter-
clockwise and clockwise, respectively, and Second
hand moves back and forth at the 12 o’clock position.
B
A
* To stop the demonstration, press Button A or B.
5
* If the watch is left untouched with the hands showing
the demonstration movement, they will
automatically return to indicate the current time in
about 2 minutes.
MODE INDICATOR
at “TIME”
Download from Www.Somanuals.com. All Manuals Search And Download.
23
BATTERY LIFE INDICATOR
● ThebatteryneedstobereplacedwhenyouseetheSecondhandmovingattwo-second
intervals instead of normal one-second intervals.
* The watch will, however, remain accurate while Second hand is moving at two-second
intervals.
BATTERY CHANGE
The miniature battery which powers your watch should last approximately
2 years. However, because the battery is inserted at the factory to check
the function and performance of the watch, its actual life once in your
possession may be less than the specified period. When the battery
expires, be sure to replace it as soon as possible to prevent any malfunction.
For battery replacement, we recommend that you contact an AUTHORIZED
SEIKO DEALER and request SEIKO SR927W battery.
2
Years
* The battery life may be less than 2 years if:
• the alarm is used more than once a day,
• the timer is used for more than 5 minutes a day, and/or
• the stopwatch is used for more than 5 minutes a day.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
WARNING
● Do not remove the battery from the watch.
● If it is necessary to take out the battery, keep it out of the reach of children.
If a child swallows it, consult a doctor immediately.
● Never short-circuit, tamper with or heat the battery, and never expose it to
fire. The battery may burst, become very hot or catch fire.
CAUTION
● The battery is not rechargeable. Never attempt to recharge it, as this may
cause battery leakage or damage to the battery.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
TO PRESERVE THE QUALITY OF YOUR WATCH
■ WATER RESISTANCE
Condition
Taking a bath
and shallow
diving
Scuba
diving**
and
saturation
diving
of use
Accidental
Swimming,
contact with yachting and
Indication on
case back
water such
as rain and
splashes
taking a
shower
Degree
of water
resistance*
Non-water
resistant
No
No
No
No
No
No
No
No
No
No indication
WATER
RESISTANT
Yes
Yes
3 bar
5 bar
WATER
RESISTANT
5 BAR
Yes
WATER
RESISTANT
10/15/20 BAR
10/15/20 bar
Yes
Yes
Yes
No
Download from Www.Somanuals.com. All Manuals Search And Download.
26
● Non-water resistant
• If the watch becomes wet, have it
* Pressure in bar is a test pressure and
should not be considered as
corresponding to actual diving depth
since swimming movement tends to
increase the pressure at a given
depth. Care should also be taken on
diving into water.
** We recommend that you wear a
SEIKO Diver’s Watch for scuba
diving.
checked by an AUTHORIZED
SEIKO DEALER or SERVICE
CENTER.
● Water resistant 5/10/15/20 bar
• Before using in water, be sure the
crown is pushed in completely.
• Do not operate the crown and
5 bar WR
buttons when the watch is wet or
in water.
If used in sea water, rinse the
watch in fresh water and dry it
completely.
■ TEMPERATURES
10/15/20
bar WR
Your watch works with stable
• When taking a shower with a water resistant 5
bar watch, or taking a bath with a water resistant
10, 15 or 20 bar watch, be sure to observe the
following:
+60°C
accuracy within a temperature
range of 5°C and 35°C (41°F
-10°C
and 95°F).
Temperatures over 60°C (140°F) or below
–10°C (+14°F) may cause a slight time loss
or gain or battery leakage or shorten the
battery life.
However, the above conditions will be
corrected when the watch returns to normal
temperature.
* Do not operate the crown or push the buttons
when the watch is wet with soapy water or
shampoo.
* If the watch is left in warm water, a slight
time loss or gain may be caused. This
condition, however, will be corrected when
the watch returns to normal temperature.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
■ CARE OF CASE AND BRACELET
■ SHOCKS & VIBRATION
Be careful not to drop your watch
or hit it against hard surfaces.
To prevent possible rusting of
the case and bracelet, wipe them
periodically with a soft dry cloth.
■ PERIODIC CHECK
■ MAGNETISM
Your watch will be adversely
affected by strong magnetism.
Keep it away from close contact
with magnetic objects.
It is recommended that the
watch be checked once every 2
2 - 3
to 3 years. Have your watch
checked by an AUTHORIZED
Years
N
S
SEIKO DEALER or SERVICE CENTER to
ensure that the case, crown, buttons, gasket
and crystal seal remain intact.
■ CHEMICALS
Be careful not to expose the
watch to solvents, mercury,
cosmetic spray, detergents,
adhesives or paints. Otherwise,
■ PRECAUTION REGARDING
CASE BACK PROTECTIVE FILM
the case, bracelet, etc. may become
discolored, deteriorated or damaged.
If your watch has a protective
film and/or a sticker on the case
back, be sure to peel them off
before using your watch.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
SPECIFICATIONS
1
Frequency of crystal oscillator........... 32,768 Hz (Hz = Hertz ... Cycles per second)
2
Loss/gain (monthly rate) .................... Less than 15 seconds at normal temperature
range (5°C ~ 35°C) (41°F ~ 95°F)
3
4
5
Operational temperature range ......... –10°C ~ +60°C (14°F ~ 140°F)
Driving system .................................. Step motor, 4 pieces
Display system
“TIME”........................................ TIME mode (hour, minute and second hands)
“ALM.ON” .................................. TIME mode (hour, minute and second hands)
“ALM.SET” ................................. ALARM SETTING mode (hour and minute hands)
The alarm is set on a 12-hour basis.
“TIMER” ..................................... TIMER mode (minute and second hands)
Up to 60 minutes can be set in minute increments.
“DATE” ....................................... CALENDAR mode (month indicated by the three
hands and date displayed in numerals)
“CHRONO.” ................................ STOPWATCH mode (minute, second and 1/10
second hands)
The stopwatch can measure up to 60 minutes in
1/10 second increments.
6
7
Battery............................................... SEIKO SR927W, 1 piece
IC (Integrated Circuit) ........................ C-MOS-LSI, 1 piece and Bipolar IC, 1 piece
* The specifications are subject to change without prior notice for product improvement.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
|