®
Model No. 831.105021
Serial No.
USER'S MANUAL
Write the serial number in the
space above for reference. The
serial number decal is found on
the frame behind the access
cover.
To schedule repair service
or to purchase parts
call SEARS toll-free at:
®
-
- - -
1 800 4 MY HOME
-
-
-
(1 800 469 4663)
24 hours a day 7 days week
To purchase or inquire about a
Sears Maintenance Agreement
call SEARS toll-free at:
-
-
-
1 800 361 6665
CAUTION
Read all precautions and instruc-
tions in this manual before
using this equipment. Save this
manual for future reference.
Visit our website at
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
TO REDUCE THE RISK OF DROWNING, ELECTRIC SHOCK, OR SERIOUS
INJURY, READ THE FOLLOWING IMPORTANT PRECAUTIONS BEFORE USING THE HYDROTHERAPY
SPA.
READ AND FOLLOW ALL INSTRUCTIONS
1. It is the responsibility of the owner to ensure
that all users of the hydrotherapy spa are
adequately informed of all precautions.
9. Do not bring any object into the hydrothera-
py spa that could damage the spa shell.
10. Never insert any object into any opening.
2. Use the hydrotherapy spa only as described
in this manual.
11. Do not use breakable containers near or in
the hydrotherapy spa.
3. The hydrotherapy spa is intended for home
use only. Do not use the spa in any commer-
cial, rental, or institutional setting.
12. Do not sit on the spa cover or place objects
on it. It is not designed to support weight.
4. Use the hydrotherapy spa only on a level
surface. Do not use the spa on carpet or
other materials that could be damaged by
moisture. Do not use the spa on rough or
sharp surfaces such as gravel or wood
chips.
13. Remove any water or debris that may collect
on the spa cover.
14. Keep children under 12 and pets away from
the hydrotherapy spa when it is not in use.
15. Keep all chemicals away from children and
pets.
5. The hydrotherapy spa will weigh approxi-
mately 2,000 pounds (908 kgs) when it is
filled with water. Be sure that the location
you select for the spa will support this
weight plus the weight of the occupants.
16. The pH and chemical balance of the water
must be maintained as explained in this man-
ual (see pages 10 and 14). Failure to do so
may cause injury to users or damage to the
spa, and will void the warranty.
6. Inspect and tighten all parts regularly; replace
any worn or missing parts immediately.
17. Individuals with infections and open sores or
wounds should not use the hydrotherapy
spa. Bacteria thrive in warm and hot water.
Always keep the spa disinfected and main-
tain the proper chemical balance.
7. DANGER—Risk of injury: Do not remove or
alter the covers on the suction fittings. Never
operate the hydrotherapy spa if the suction
guard is missing or broken. If you need to
replace a suction fitting, be sure to use only
manufacturer-recommended parts. Keep hair
and body away from the suction guard. Do
not allow long hair to float freely in the
water; long hair should be restrained with a
bathing cap.
18. Shower before and after using the hydrother-
apy spa. This will remove any deodorant,
perspiration, or body oils that could contami-
nate the water. Showering after will remove
any residual chemicals and any bacteria that
may have been in the spa.
8. IMPORTANT: Do not allow the hydrotherapy
spa to be exposed to direct sunlight when it
is empty. The surface of the spa shell can
reach temperatures as high as 150°F (65°C)
in a matter of minutes if exposed to the sun
while it is empty. These high temperatures
can cause significant damage, such as blis-
tering of the shell surface and warping of the
spa shell. Any damage caused by sun expo-
sure is not covered under warranty.
19. WARNING—The Ground Fault Circuit
Interrupter (GFCI), must be tested before
each use. To test the GFCI, press the “test”
button while the spa is running. The spa
should shut off. Press the “reset” button.
The spa should resume normal operation. If
the spa continues to run after the “test” but-
ton is pressed, then the GFCI is damaged.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not use the spa until the GFCI has been
repaired or replaced by a qualified electri-
cian.
temperature to 100°F (38°C) or below. Lower
temperatures are also recommended for chil-
dren. Children should not be allowed to swim
under the surface of the water in the spa.
20. Keep all electrical appliances such as radios,
telephones, televisions, and lights at least
five feet (1.5 m) away from the water.
26. WARNING—To reduce the risk of injury:
Always use an accurate thermometer to
determine the water temperature before
using the hydrotherapy spa.
21. DANGER—Risk of electric shock: Do not set
up the hydrotherapy spa within five feet (1.5
m) of any metal objects or surfaces. As an
alternative, you may use the spa within five
feet (1.5 m) of metal objects if each metal
object is permanently connected to the bond-
ing LVG on the controller of this unit by a
minimum No. 6 AWG (13.3 mm2) solid copper
conductor. At least two lugs marked “BOND-
ING LUGS” are provided on the external sur-
face or on the inside of the supply terminal
box or compartment. To reduce the risk of
electric shock, connect the local common
bonding grid in the area of the hot tub or spa
to these terminals with an insulated or bare
copper conductor not smaller than 6 AWG.
All field-installed metal components such as
rails, ladders, drains, or other similar hard-
ware within 3 m of the spa or hot tub shall be
bonded to the equipment grounding bus with
copper conductors not smaller than 6 AWG.
27. WARNING—To reduce the risk of injury:
Pregnant women should consult with their
physician before using the hydrotherapy spa.
Pregnant women should not use the spa if
the water temperature is above 100°F (38°C);
the unborn child could be seriously harmed.
This is especially important during the first
90 days of the pregnancy.
28. DANGER—To reduce the risk of drowning:
Prolonged immersion in the hydrotherapy
spa may cause hyperthermia, a dangerous
condition which occurs when the internal
body temperature rises several degrees
above the normal body temperature of 98.6°F
(37°C). The symptoms of hyperthermia are
nausea, dizziness, drowsiness, and fainting.
Effects include: a lack of awareness, inability
to perceive heat or danger, and a greater risk
of drowning due to a loss of consciousness.
Special note: Individuals suffering from
hyperthermia may be unable to realize that
they must exit the spa, and they also may be
physically unable to do so.
22. Do not operate the pump motor when the
hydrotherapy spa is empty. The pump motor
may be seriously damaged if it is operated
without water circulating. The cut-off valves
must always be open when using the spa
(see step 2 on page 8).
29. WARNING—To reduce the risk of drowning:
Do not use the hydrotherapy spa if you are
under the influence of alcohol or drugs. Heat
from the water, in conjunction with alcohol or
drugs, can cause unconsciousness.
23. DANGER—Risk of drowning: Exercise
extreme caution to prevent unauthorized and
unsupervised use of the hydrotherapy spa by
children. Children must always be supervised.
30. WARNING—To reduce the risk of injury or
drowning: Consult your physician about pos-
sible side-effects of any medications you
may be taking before using the hydrotherapy
spa. Heat from the water, in conjunction with
some medications may cause drowsiness
and increase the risk of drowning. Others
can effect blood pressure, heart rate, and cir-
culation.
24. DANGER—To reduce the risk of drowning:
• Never use the hydrotherapy spa alone;
• Children should not use the spa unless
they are supervised by an adult;
• Keep pets away from the spa at all times;
• Always replace and lock the spa cover
when the hydrotherapy spa is not in use.
25. WARNING—To reduce the risk of injury: The
water temperature should never exceed
31. Do not use the hydrotherapy spa immediate-
ly after strenuous exercise.
104°F (40°C). Water temperature in excess of
100°F (38°C) may be injurious to your health.
If you plan to remain in the hydrotherapy spa 32. WARNING—To avoid injury, exercise care
for more than 10 to 15 minutes, lower the when entering or exiting the spa.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
33. WARNING—To reduce the risk of injury: It is
especially important for persons over the
age of 35 or persons with pre-existing health
problems, such as obesity, heart disease,
high or low blood pressure, circulatory prob-
lems, or diabetes to consult their physician
before using this product.
34. WARNING—The included warning sign must
be posted where all users of the spa can see
and read it (see POSTING THE WARNING
SIGN on page 13).
35. CAUTION—The hydrotherapy spa is not
designed for in-ground installation. Do not
install the hydrotherapy spa in-ground.
36. WARNING—Disconnect the electric power
supply before servicing the spa.
37. If you feel pain or dizziness at any time while
using the hydrotherapy spa, discontinue use
and contact a physician.
38. Minimum Electrical Ratings:
• 240 Volt Minimum Supply Conductor
Ampacity: 40 Amps
• 240 Volt Minimum Breaker/Fuse: 40 Amps
39. A green terminal or a terminalmarked
G, GR, Ground, Grounding, or with the
symbol is located inside the supply terminal
box or compartment. To reduce the risk of
electric shock, this terminal must be con-
nected to the grounding means provided in
the electric supply service panel with a con-
tinuous copper wire equivalent in size to the
circuit conductors supplying this equipment.
Continuous exposure of the spa surface to direct
sunlight or ultra-violet rays may cause damage to
the spa’s surface, will void the warranty, and will
result in potentially hazardous surface
temperatures.To avoid sun damage, the cover
should be in place when the spa is not in use.
40. WARNING DECAL PLACEMENT: Locate the
decals at right and familiarize yourself with
this information.
WARNING:
Read all instructions before using the hydrotherapy spa. ICON assumes no
responsibility for personal injury or property damage sustained by or through the use of this prod-
uct.
SAVE THESE INSTRUCTIONS
5
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Thank you for selecting the innovative IMAGE®
RENEW 510 hydrotherapy spa. The RENEW 510
For your safety and benefit, read this manual care-
fully before using the RENEW 510. If you have addi-
offers the features and quality of a traditional hot tub at tional questions, please call our Customer Service
an affordable price. Best of all, the RENEW 510 pro-
vides the benefits of hydrotherapy in the comfort and
privacy of your own home.
Department toll-free at SEARS 1-800-4MYHOME
(469-4663), or SEARS 1-877-LEFOYER (533-6937)
24 hours. To help us assist you, please note the prod-
uct model number and serial number before calling.
The model number is 831.105021. The serial number
can be found on a decal attached to frame inside the
Hydrotherapy is a proven method for soothing tired
muscles after exercise or for relieving the stress of a
busy life. The warm environment stimulates blood flow, spa (see the front cover of this user’s manual).
which is essential in the healing process, and the pow-
erful massage action further eases tension and stress
throughout the body. The RENEW 510 gives you the
specialized treatment you need to feel your best.
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Console
Light
Spa Shell
Spa Cover
Filter
Access
Cover
Cover Latch
Locking
Buckle
Wood Panels
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CHOOSING A LOCATION FOR THE HYDROTHERAPY SPA
There are many factors to consider when choosing a location to set up the hydrotherapy spa. These factors vary
depending on whether you use the hydrotherapy spa inside or outside. We have listed several factors you may
wish to consider as you decide where you want to use the hydrotherapy spa.
If you set up the hydrotherapy spa inside:
If you set up the hydrotherapy spa outside:
1. The hydrotherapy spa will increase the level of
humidity in your home. The location you choose
should be well ventilated. You may need to install
a ventilation fan or use a dehumidifier.
1. You should check your local building codes con-
cerning the use of outdoor spas.
2. The hydrotherapy spa should be close to a source
of water.
2. The hydrotherapy spa should be close to a source
of water.
3. We recommend that you place the hydrotherapy
spa on a water- and stain-resistant, non-slip sur-
face. Do not use the spa on rough or sharp sur-
faces such as gravel or wood chips.
3. Do not use the hydrotherapy spa on carpet or
other material that may be damaged by moisture.
We recommend that you place the spa on a
water- and stain-resistant, non-slip surface with a
floor drain for any water that may splash from the
spa.
4. Be sure that the location you choose is stable. It
must be able to support the weight of the
hydrotherapy spa when it is filled with water plus
the weight of the occupants. The hydrotherapy
spa weighs approximately 2,000 pounds (908 kgs)
when filled with water.
4. Be sure that the location you choose is stable. It
must be able to support the weight of the
hydrotherapy spa when it is filled with water plus
the weight of the occupants. The hydrotherapy
spa weighs approximately 2,000 pounds (908 kgs)
when filled with water.
5. Think about environmental factors, such as rain,
wind, shade, sunlight, and so forth.
6. You should be able to monitor the use of the
hydrotherapy spa from your home, to prevent
unauthorized use by children. You may want to
enclose the spa with a fence and self-latching
gate to prevent unauthorized use.
5. Do not use the hydrotherapy spa above a finished
living area due to the risk of water damage.
6. Be sure that there is room around the hydrothera-
py spa to permit servicing of the unit. The dimen-
sions of the spa are: 5’ 10” W x 6’ 4” L x 2’ 6” H
(153 cm x 183 cm x 61 cm). Make sure to allow
for this size when choosing the location.
7. Be sure that there is room around the hydrothera-
py spa to permit servicing of the unit. The dimen-
sions of the spa are: 5’ 10” W x 6’ 4” L x 2’ 6” H
(153 cm x 183 cm x 61 cm). Make sure to allow
for this size when choosing the location.
7. The hydrotherapy spa is not designed for in-floor
installation. However, it is compatible with a deck
system that is built flush with the top of the spa,
provided you leave access to the motor for ser-
vice.
8. The hydrotherapy spa is not designed for in-ground
installation. However, it is compatible with a deck
system that is built flush with the top of the spa,
provided you leave access to the motor for service.
8. Make sure to consider such factors as aesthetics
or privacy that may affect the safety or enjoyment
of using the hydrotherapy spa.
9. Make sure to consider such factors as aesthetics
or privacy that may affect the safety or enjoyment
of using the hydrotherapy spa.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SET-UP AND ASSEMBLY
Before beginning assembly, carefully read the
following information and instructions:
• During assembly, make sure that all parts are ori-
ented as shown in the drawings.
• Place all parts in a cleared area and remove the
packing materials from the spa shell; do not dis-
pose of the packing materials until assembly is
completed and the spa is in operation.
• Read each assembly step before you begin.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
• Assembly requires two people.
ASSEMBLY REQUIRES THE FOLLOWING
TOOLS (not included):
• Note: Some small parts may have been pre-
attached for shipping. If a part is not in the parts
bag, check to see if it has been pre-attached.
• One (1) phillips screwdriver
1. Before beginning assembly, make sure that you
have read and understand the information on
the previous two pages.
1
Remove the four screws from the access cover on
the console side of the spa. Remove the access
cover by sliding it down and then pulling the bottom
of it away from the spa. Be careful not to damage
the spa shell.
Access
Cover
Remove the Power Cord with the GFCI from inside
the spa.
Screws
Power Cord
2. Locate and check the positions of the two cut-off
valves. The cut-off valves may have been closed at
the factory during manufacturing. However, the cut-
off valves must be open for spa operation. To open
the valves, hold the handles and turn them until you
can pull them out to the open position. IMPORTANT:
THE MOTOR WILL BE DAMAGED IF IT IS OPER-
ATED WITH THE CUT-OFF VALVES CLOSED.
2
Cut-off
Valve
Cut-off
Valve
13
Close the valve knob on the drain hose. Thread the
cap onto the drain hose. Thread the drain plug into
the Pump Motor (13). Tighten the two pump fittings.
Drain Hose
Pump
Fittings
Drain
Plug
Valve
Knob
Cap
8
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Remove the two warning decals (not shown) from
the spa shell. Wipe out the spa shell using a damp
cloth. Before you fill the spa, make sure that it is in
the desired position and that it can easily be ser-
viced. Once the spa is filled with water, it must be
drained before it can be moved.
3
Fill to Here
Using a garden hose or other clean water source,
begin filling the spa. Do not use soft water. You
may fill the spa with cool water; however, if you use
warm or hot water, the spa will be ready to use
sooner. Fill the spa until the water is about four
inches (10 cm) below the console. Do not overfill
the spa.
4. Place the Spa Cover (18) over the spa. Make sure
4
that the Spa Cover is centered.
Strap
Spa
Latch
Snap a Buckle (2) onto each of the four latches on
the Spa Cover (18).
2
Pull down one of the straps on the Spa Cover (18)
and hold the Buckle (2) against the wood panels on
the side of the spa. (Note: To position the Buckle
correctly, have a second person hold the strap on
the opposite side of the Spa Cover tight.) The Spa
Cover must be tight. Do not place the Buckle
over the grooves between the wood panels.
Refer to the inset drawing. Remove the latch from
the Buckle (2). Attach the Buckle to the wood panel
with two Buckle Screws (1). Note: It may be helpful
to use a drill with a 1/16” bit to make starter
holes in the wood panel. It may also be helpful to
apply a little soap or wax to the screw threads.
1
18
Attach the other three Buckles (2) to the wood panels
in the same way.
Spa
Strap
2
5. Before using the spa, follow the instructions on page 13 to post the included warning sign. Do not allow the
spa to be used before the warning sign is posted.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE HYDROTHERAPY SPA
The hydrotherapy spa is designed to seat two adults.
The ten thera-jets can be regulated to provide a relax-
ing massage to sooth away stress, and the strength
of the water massage can be adjusted by the air con-
trol. The hydrotherapy spa holds 200 gallons (167
imperial gallons) of water and offers an automatic,
programmable heating (70°F to 104°F [21°C to 40°C])
and filtration system.
TESTING AND TREATING THE WATER
The hydrotherapy spa comes with a starter chemical
pack for maintaining the water in the spa. Disregard
the directions on the individual packages of “QUICK
pHix It DOWN” and “QUICK pHix It UP.” However, the
directions on the bottle of “Non-chlorine Shox” and
“Bromine Base” are correct. Always keep the chemi-
cals away from children and pets.
The guidelines below explain how to properly use the
hydrotherapy spa. Follow these guidelines to maintain
the hydrotherapy spa for your long-term enjoyment.
The first time you use the spa, you should test and
treat the water. You must also treat the water each
time you refill the spa. Once you have verified that
the spa is functioning properly, and the water has cir-
culated for a while, remove the spa cover and add 1/3
of the “Bromine Base” bottle, and 1/3 of the “Non-
chlorine Shox” bottle to the water. Allow the water to
circulate for five minutes. You should now test the pH
of the water using the included pH test kit. The pH
reading should be between 7.2 and 7.8.
PLUGGING IN THE HYDROTHERAPY SPA
Important: The hydrotherapy spa is equipped with a
120/240V convertible electronics package. Operation
at 240V will allow the heater to run more efficiently
and less often. Conversion of the spa to 240V oper-
ation must be performed only by a qualified,
licensed electrician and must comply with all
local, state, and federal electrical codes. Please
refer to the instructions on the inside of the electronics
package for information about converting the spa to
240V operation.
If the level is too low, add one teaspoon from one of
the “QUICK pHix It UP” packets to the water. Let the
water circulate through the spa for five minutes. Test
the pH level again. Repeat until the pH level is cor-
rect.
Once the hydrotherapy spa is filled with water, the
power cord can be plugged in and the spa can be
turned on. Note: The first time the power cord is
plugged in, the spa will turn on automatically.
If the level is too high, add one teaspoon from one of
the “QUICK pHix It DOWN” packets to the water. Let
the water circulate through the spa for five minutes.
Test the pH level again. Repeat until the pH level is
correct.
When connecting the power cord, plug the power cord
directly into a grounded circuit capable of carrying 15
or more amps. No other appliance should be on the
same circuit. Replace the power cord immediately if it
becomes damaged.
See WATER CHEMISTRY on page 14 for information
concerning proper water maintenance.
STARTING THE HYDROTHERAPY SPA
There is a Ground
Fault Circuit
Interrupter (GFCI)
on the end of the
power cord. Always
test the GFCI
Test and
Reset
Buttons
Once you have tested the GFCI, you should verify the
water flow from the pumping unit. Set the air control
on the console to the lowest setting (see USING THE
CONSOLE on page 12). The pumping unit will heat
the water as it pumps. Cover the hydrotherapy spa
with the spa cover. The spa cover must be tight.
(See SECURING THE SPA COVER on page 13.) The
water will heat at about 2.0°F (1°C) an hour with the
cover on. If you are using the spa indoors, and the
room temperature is maintained at 70°F (21°C), it will
take approximately 24 to 26 hours for the water to
reach the set temperature.
before using the
hydrotherapy spa.
Grounded
circuit capable
of carrying 15 or
more amps
GFCI
First, turn on the
spa by pressing the
jet control on the
console (see USING THE CONSOLE on page 13).
Once the unit is running, press the GFCI “test” button.
The spa should shut off. Press the “reset” button. The
spa should resume normal operation. If the spa contin-
ues to run after the “test” button is pressed, the GFCI is
damaged. Do not use the spa until the GFCI has been
repaired or replaced by a qualified electrician.
The temperature and water flow can be set or
changed by the controls on the console (see USING
THE CONSOLE on page 12).
10
Download from Www.Somanuals.com. All Manuals Search And Download.
SPA SHELL DIAGRAM
G
A
C
A
B
E
F
D
A
B
A
B
SPA OPERATION
The filter (C) can be removed for cleaning and
replacement (see page 17).
Refer to the diagram above. The function of each
component is explained below:
The suction vent (D), located near the floor of the
spa, brings the water into the pump, in order to oper-
ate the system. The suction cover should always be in
place over the suction vent. Never operate the spa
without the suction cover in place.
The six uni-directional thera-jets (A) are located on
the sides of the spa. Five jets focus a water massage
on your upper or lower back. The remaining jet pro-
vides a foot hydro-massage when you are in the
reclining seat.
This spa is ozone ready. An optional ozone generator
can be installed to utilize the ozone jet (E). Ozone
provides a way to help sanitize your spa with minimal
chemical treatment.
The three multi-directional thera-jets (B) can be
adjusted for a custom hydro-massage. One of the jets
is located on the reclining seat and focuses the water
massage on your lower back. Another jet is located
on one of the bench seats, below a uni-directional
thera-jet, and focuses a water massage on your lower
or middle back. The remaining jet, located on the
other bench seat, focuses a water massage on your
upper or lower back.
The temperature probe (F) reads the current water
temperature, which is displayed on the console.
The spa also has a light (G) for evening use.
The spa features automatic freeze protection. If the
water temperature falls below 40°F (4°C), the pump
will begin circulating and heating the water to prevent
the water from freezing.
Note: Each thera-jet can be shut off by being pressed
in and turned back on by being pulled out.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CONSOLE DIAGRAM
Jet
Light
Temperature
Buttons
Button Button
Refer to the diagram above. The function of each
control is explained below:
Jet Button: Turns the spa jets on and off. If the but-
ton is pressed once, the spa jets will run at low speed,
providing gentle hydrotherapy. If the button is pressed
again, the jets will run at high speed, providing more
intense hydrotherapy. If the button is pressed a third
time, the jets will shut off.
Temperature Buttons: Control the temperature setting
of the water. The temperature can be set from 70°F to
104°F. The water heats at about 1.8°F per hour with
the cover on. Use a medical or other accurate ther-
mometer to check the temperature of the water. Note:
The word “COOL” will appear in the console display if
the temperature of the water is more than 20°F cooler
than the set temperature. When this happens, the
heater will automatically activate to warm the water.
The word “ICE” will appear in the display if the tem-
perature drops below 40°F. If this happens, the pump
will automatically circulate the water and warm the
plumbing to keep the water from freezing.
The spa also features an automatic mode that heats
and filters the water when the spa is left unattended.
When the spa is first plugged in, or if the buttons on
the console have not been pressed for longer than
twenty minutes, the automatic mode will begin filtering
or heating the water as needed. Note: To keep the
filter and heat cycles from running, the power
cord must be unplugged.
Light Button: Turns the underwater light on and off.
The temperature buttons can also be used to change
the filter cycle time. First, press either of the tempera-
ture buttons. While the console display is flashing,
press the jet button. The letters “FC” should appear in
the display. Next, press the temperature buttons to
select a 2-, 4-, or 6-hour filter cycle time. Then, press
the jet button again. If the filter cycle time is not
changed, it will default to 2 hours.
Air Control: Determines the amount of air flowing
through the hydrotherapy jets during operation. If the
control is turned counterclockwise, the amount of air
flowing through the jets will increase. If the control is
turned clockwise, the amount of air will decrease.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
SECURING THE SPA COVER
ATTACHING THE RED AND BLUE LIGHT COVERS
To secure the spa cover, snap the latches on the spa
cover into the buckles on the side panels.
The spa comes with
red and blue light
covers for the spa
light. To attach one of
the light covers, cen-
ter it over the spa
light and press it into
place.
To lock the buckles,
insert the key and
turn it clockwise 1/4
Light
Cover
Latch
turn. To unlock the
Buckle
buckles, insert the key
Light
Key
and turn it counter-
clockwise 1/4 turn.
Always keep the buckles locked when the spa is
not in use. Keep the keys in a safe place, out of
the reach of children.
POSTING THE WARNING SIGN
The included warning sign, shown below, must be posted on a wall or fence where it will be visible to all
users of the spa. Whenever the spa is moved, the sign must also be moved and reposted near the spa. If the
sign becomes lost or illegible, call our toll-free Customer Hot Line at SEARS 1-800-4MYHOME (469-4663), or
SEARS 1-877-LEFOYER (533-6937) 24 hours a day to obtain a free replacement sign. Post the sign as
described above.
DURING PREGNANCY, SOAKING IN HOT WATER MAY CAUSE
DAMAGE TO THE FETUS. LIMIT USE TO 10 MINUTES AT A TIME.
PREVENT DROWNING
PREVENT CHILD DROWNING
• Spa heat speeds up the effect of alcohol, drugs, • Water attracts children.
or medicine and can cause unconsciousness.
• Always attach spa cover after each use.
• Immediately leave spa if uncomfortable or
sleepy.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
The hydrotherapy spa is designed to provide you with
years of enjoyment. Please follow the guidelines
below to properly maintain the spa.
MAINTAINING THE SPA COVER
The spa cover should be cleaned monthly. To clean
the spa cover, use water and a non-abrasive cleaner
on the entire cover. Rinse the cover with a garden
hose to remove any cleaner residue. Dry the cover
entirely. You should also use a non-silicone based
vinyl conditioner on the cover after you clean it. This
will help protect the cover from sun damage.
MAINTENANCE SCHEDULE
DAILY
• Check the water level and refill the spa to the level
shown in step 3 on page 9.
• Check the pH balance and sanitizer level. Adjust if
necessary (see WATER CHEMISTRY below).
• Clean the surface of the water with a skimming net.
REPLACING THE LIGHT BULB
If the light bulb in the spa burns out, first remove the
access cover to replace it (see ATTACHING AND
REMOVING THE ACCESS COVER on page 15).
WEEKLY
• Clean the spa shell at the waterline.
• Check and thoroughly clean the filter (see CHECK-
ING AND CLEANING THE FILTER on page 17).
• Replace the filter if needed (see ORDERING
REPLACEMENT PARTS on the back cover).
Locate the light housing. Turn the housing counter-
clockwise and remove it from the spa shell.
MONTHLY
Light Housing
Light
• Clean the spa cover (see MAINTAINING THE SPA
COVER on the right).
Bulb
• Soak the filter for two hours in a trisodium phos-
phate (TSP) solution. Rinse the filter in clean water.
• Replace the filter if needed (see ORDERING
REPLACEMENT PARTS on the back cover).
Light
Housing
EVERY THREE MONTHS
• Drain the spa and refill with clean water. Sanitize
and test the pH of the water.
• Check for any leaks around the pump or joints in
the pipes. The seals will wear out over time; detect-
ing leaks early can reduce repair costs.
• Clean the interior of the spa. Do not use solvents or
waxes.
To replace the light bulb, pull the old bulb out of the
housing and insert a new bulb. Re-attach the light
housing to the spa shell. Re-attach the access cover
to the spa.
SANITIZING THE SPA
EVERY SIX MONTHS
• Treat the exterior with a wood sealant (see MAIN-
TAINING THE SPA EXTERIOR below).
Please refer to your local pool and spa supplier for
information concerning which chemicals you should
use in your area to sanitize the spa.
MAINTAINING THE SPA EXTERIOR
The most common sanitizing agent is a solid bromine
concentrate. The amount required varies according to
several factors, such as user load, temperature, water
conditions, and so forth.
The wood panel exterior has been treated with a
sealant at the factory to protect the wood from water
damage. We suggest that you treat the wood finish
twice a year with an additional coat of weather
sealant. Contact your local spa and pool supplier for
advice on which sealants work best in your climate.
Proper water maintenance is a complex process.
Contact your local pool and spa supplier for informa-
tion on how you should accomplish this.
CLEANING THE SPA SHELL
WATER CHEMISTRY
The spa shell should be cleaned with a mild soap
solution. Do not use solvents. The spa should always
be clean and dry before being moved or stored.
The hydrotherapy spa comes with a starter chemical
pack for maintaining the water in the spa. (See TEST-
ING AND TREATING THE WATER on page 10.)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional chemicals can be purchased at a pool and
spa supply store.
ATTACHING AND REMOVING THE ACCESS COVER
To locate the access cover, refer to the drawing on
page 6. Turn off the power to the spa. To remove the
access cover, first remove the four access cover
screws. Slide the access cover down and then pull
the bottom of it away from the spa. Be careful not to
damage the spa shell as you remove the cover.
CAUTION: The chemicals used to maintain the pH
balance of the water and to sanitize the water can
be dangerous. Always follow these basic guide-
lines when handling the chemicals:
1. Always read and follow the directions on the
label, unless directed otherwise.
2. Never mix different chemicals.
3. Do not exceed the recommended amounts of
chemicals—follow the directions on the label
closely.
4. Keep all chemicals out of the reach of children
and pets.
5. Keep all containers closed tightly when not in
use.
Access
Panel
6. Never add water to the chemicals—always add
the chemicals to the water as directed.
7. Always store chemicals in a cool, dry place.
Screws
MAINTAINING THE PROPER PH BALANCE
The pH factor is a measure of relative acidity or alka-
linity in the water. It is measured on a scale of 1 to 14.
Pure water has a value of 7, which is neutral. Any
value above 7 is alkaline, and any value below 7 is
acidic. You should maintain a slightly alkaline pH
level, between 7.2 and 7.8, in the hydrotherapy spa.
If the spa will be stored for any period of time, place
the power cord inside the spa before re-attaching the
access cover.
Severe problems can occur when the pH balance is
not maintained within this range. If the pH level
To reattach the access cover, insert the top of the
cover under the edge of the spa shell. Slide the cover
up until the bottom of the cover clears the trim along
the bottom of the spa. Slide the cover into place and
re-attach it with the two access cover screws.
exceeds 7.8, dissolved minerals can build-up and clog
the plumbing in the spa jet unit. If the pH level falls
below 7.2, the acid level in the water will begin to cor-
rode the metal parts in the spa jet unit. Also, the sani-
tation agents in the water will not be effective if the pH
level is not properly maintained. Damage caused by
improper pH levels is not covered under the warranty.
To maintain the proper pH level, you should test the
pH of the water regularly, using the included pH test
kit. The pH reading should be between 7.2 and 7.8. If
the level is too low, add a pH increaser (usually soda
ash). If the level is too high, add a pH reducer (usually
sodium bisulfate). Test the water again after five min-
utes. See the instructions with your pH test kit for addi-
tional information about testing and adjusting the pH.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
DRAINING THE HYDROTHERAPY SPA
DRAINING THE PUMP
The hydrotherapy spa should be drained at least four
times a year and refilled with clean water. You may
need to drain the spa more often, depending on the
user load. This must be done, because after repeated
chemical treatment, the water becomes chemically
saturated. Once this happens, additional chemical
treatment of the water is no longer effective. The spa
should also be drained if you will not be using it for
long periods of time. The spa must always be drained
before major repairs are made.
After the hydrotherapy spa is drained (see DRAINING
THE HYDROTHERAPY SPA above), the pump in the
spa jet unit should also be drained if the hydrotherapy
spa will be stored for more than thirty days, or if it
may be exposed to freezing temperatures.
To drain the pump, remove the access cover from the
spa unit (see ATTACHING AND REMOVING THE
ACCESS COVER on page 15). Locate the pump
inside the spa unit. Remove the drain plug from the
pump. Tip the spa jet unit slightly, until all the water
has drained from the pump. Replace the drain plug.
The hydrotherapy spa should always be covered
when it is empty. Direct sunlight can cause exten-
sive damage. The surface of the spa shell can
reach temperatures as high as 150°F (65.5°C). in
a matter of minutes if exposed to the sun while it
is empty. These high temperatures can cause sig-
nificant damage, such as blistering of the shell
surface and warping of the spa shell. Any damage
caused by sun exposure is not covered under
warranty.
OPENING AND CLOSING THE CUT-OFF VALVES
For minor repairs to
the pump/motor, the
cut-off valves can be
closed. To close the
valves, remove the
access cover from the
back of the spa unit.
Locate both cut-off
valves. Push the han-
Pump
Drain Plug
To drain the hydrotherapy spa, follow these steps:
1. Set the temperature control on the console to the
lowest setting.
dles into the closed position and turn the handles
until they lock into place.
2. Unplug the power cord.
3. Remove the access cover from the back of the
spa unit.
If you are planning to work on the pump/motor, you
will also need to drain the pump (see this page).
4. Remove the drainage hose from the clip and
attach a garden hose to the valve on the
drainage hose.
5. Open the valve by turning the knob counterclock-
wise. The water will begin to drain.
To open the valves, turn the handles until they are
unlocked, and pull the handles out to the open
position.
6. When the spa is empty, close the valve and
remove the garden hose. Return the drainage
hose to the clip and replace the access cover.
7. Refill the spa and treat the water with chemicals
(see pages 9, 10, 14 and 15).
Cut-off
Valve
Cut-off
Valve
Knob
Cap
Drain Hose
Valve
16
Download from Www.Somanuals.com. All Manuals Search And Download.
WINTER USE AND CARE
3. Reach into the basket with four fingers and pull
the basket towards you until it snaps free.
4. Lift the basket out of the filter housing by pulling
on the handle on the far side and turning the bas-
ket towards you.
5. Clean the basket by spraying it with a garden
hose or holding it under a faucet. Note: Avoid
hitting the basket against objects to clean it,
since this may break the basket.
The hydrotherapy spa is designed for year-round use.
If you decide to store the hydrotherapy spa for the
winter, store it in a warm, dry location. Follow the
steps below to winterize the hydrotherapy spa.
1. Drain the spa (see DRAINING THE
HYDROTHERAPY SPA on page 16).
2. Remove all remaining water from the spa shell.
Dry the spa shell with towels.
6. Put the basket back into the housing and press it
down until it snaps into place.
7. Close the filter door.
3. Set the air control on the console to the lowest
setting. Use a wet/dry vacuum to pull any remain-
ing water from the system. To do this, place the
vacuum nozzle over each thera-jet, starting with
the highest jet and finishing with the lowest one.
4. Set the air control on the console to the highest
setting and repeat step 3.
5. Drain the pump (see DRAINING THE PUMP on
page 16). Once the water has drained from the
pump, place the vacuum nozzle over the
drainage hole in the pump and vacuum any addi-
tional water from the pump. Note: For additional
protection you can remove the pump/motor
from the spa to store it in a climate controlled
room.
Removing and Cleaning the Filter Cartridges:
1. Follow steps 1 through 4 at the left to remove the
basket.
2. Reach into the housing and locate the plastic
diverter on top of the filter cartridges. Rotate the
valve on the diverter until it is fully open.
3. Stick two fingers into the holes in the diverter and
lift the diverter and the upper filter cartridge
directly upwards until the edge of the diverter
clears the housing. Then, tip the diverter towards
yourself and pull it out. Note: If the diverter
comes off the filter cartridge, reach into the hous-
ing and lift out the upper filter cartridge.
6. Clean the spa shell (see page 14).
7. Clean the filter (see this page).
8. Re-attach the access cover.
9. Re-attach the spa cover.
4. Lift the lower filter cartridge out of the housing.
5. Clean the filter cartridges with a garden hose or
under a faucet. Spray each pleat from top to bot-
tom. Note: To avoid damaging the filter car-
tridges, do not use a brush to clean them.
6. To remove body oils or sun tan lotions, soak the
filter cartridges in a cleaning solution purchased
from a pool and spa supply store.
7. Inspect the filter cartridges for damage. Replace
the filter cartridges if there is any sign of damage.
8. Put one filter cartridge back into the housing.
9. Push the tube on the diverter into the other filter
cartridge as far as it will go. Put the other filter
cartridge into the housing.
CONVERTING THE SPA TO A 240 VOLT
POWER SOURCE
The hydrotherapy spa is designed to operate with
either a 120v power source or a 240v power source.
For your convenience, the spa is shipped ready to
accept a 120v power source. However, you can great-
ly improve the performance of the spa by converting
the spa’s power supply to receive power from a 240v
power source. If the spa is converted, it must be wired
directly into an approved 240v GFCI in your home by
a licensed, qualified electrician in accordance with all
local, state, and national electrical codes.
10. Put the basket back into the housing and press it
down until it snaps into place. Close the filter door.
ADJUSTING THE FILTER DIVERTER
CHECKING AND CLEANING THE FILTER
The diverter regulates the flow of water to the filter in
order to make the pump run smoothly. Open the
diverter fully to begin with. If the pump runs smoothly,
no further adjustment is necessary.
The filter should be checked periodically for build-up
of dirt and oil. To check or clean the filter, it is neces-
sary to remove the basket and the two filter car-
tridges from the filter housing.
If the pump begins to cavitate (if you hear a “cracking”
sound or if the speed of the pump surges up then
slows down repeatedly), turn the valve slightly to
reduce the water flow. Keep adjusting the valve in
small increments until the pump runs smoothly.
Removing and Cleaning the Basket:
1. Turn off the power.
2. Locate the filter housing in one corner of the spa.
Grip the tab on the filter door and pull it open.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
-
TROUBLE SHOOTING
Most problems can be solved by following the simple steps below. Find the symptom that applies, and
follow the steps listed. If further assistance is needed, call our Customer Service Department toll-free at
SEARS 1-800-4MYHOME (469-4663), or SEARS 1-877-LEFOYER (533-6937), 24 hours a day.
1. SYMPTOM: THE SPA WILL NOT OPERATE
6. SYMPTOM: THE WATER DOES NOT HEAT
a. Check to see if the GFCI breaker is tripped, or
was not turned on. Reset the GFCI breaker.
a. Make sure that the hydrotherapy spa is fully
covered with the spa cover. The spa cover
must be tight for the water to heat. Set the
air control to low. Set the temperature to the
desired setting. The water will heat at a rate of
2.0°F (1°C) an hour. If you are using the spa
indoors, and the room temperature is main-
tained at 70°F (21°C), it will take approximately
24 to 36 hours for the water to reach the set
temperature.
2. SYMPTOM: THE CIRCUIT BREAKER OR THE
GFCI TRIPS WHILE THE SPA IS OPERATING
a. Reset the circuit breaker or the GFCI. If the cir-
cuit breaker or the GFCI trips again, contact a
qualified electrician for service.
3. SYMPTOM: THE PUMP HUMS
b. If you are using the hydrotherapy spa outdoors,
it may take longer for the water to heat. See
the chart below for the approximate heating
time.
a. The filter may be dirty or damaged. Remove
the filter housing from the spa jet unit and clean
or replace the filter.
b. The pump may have a foreign object stuck in
the impeller. Contact our customer service
department or, if your spa is no longer under
warranty, you may also contact a local spa and
pool service provider.
Air Temperature
70°F+ (21°C+)
50°F to 70°F (10°C to 21°C) 2 to 3 days
30°F to 50°F (1°C to 10°C) 3 to 4 days
Heating Time
24 to 36 hours
b. If the water still has not heated after four days,
contact our customer service department or, if
your spa is no longer under warranty, you may
also contact a local spa and pool service
provider.
c. The pump may have a loose wire connection.
Contact our customer service department or, if
your spa is no longer under warranty, you may
also contact a local spa and pool service
provider.
c. If actual water temperature is lower that the set
temperature, and the Heat On LED indicator on
the console is not lit, contact our customer ser-
vice department. If your spa is no longer under
warranty, contact a local spa and pool service
provider.
4. SYMPTOM: THE PUMP HUMS BUT DOES NOT
ROTATE
a. The pump may be jammed. Contact our cus-
tomer service department or, if your spa is no
longer under warranty, you may also contact a
local spa and pool service provider.
7. SYMPTOM: THE WATER IS NOT BEING
CLEANED BY THE FILTER
5. SYMPTOM: THE PUMP IS NOISY WHILE
OPERATING
a. Check to see if the filter is in place. Clean the
filter if it is dirty.
a. There may be debris in the pump. Contact our
customer service department or, if your spa is
no longer under warranty, you may also contact
a local spa and pool service provider.
b. Check the chemical balance of the water. If the
pH is incorrect, the sanitizing agents will not
function properly.
b. The pump may have a bad bearing. Contact
our customer service department or, if your spa
is no longer under warranty, you may also con-
tact a local spa and pool service provider.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
8. SYMPTOM: THE WATER PULSATES OR
THERE IS MINIMUM WATER FLOW
10. SYMPTOM: THE SPA CONTINUES TO RUN
AFTER IT HAS BEEN SHUT OFF
a. Adjust the water level. This usually occurs only
when the water level is low. Add water until the
thera-jets are covered (see step 4 on page 9).
a. To turn the spa jets on, press the Pump button
once. To turn the spa jets off, press the control
twice. After you press it once, the spa jets will
shut off for about 30 seconds, and restart.
Press the control again. The spa jets will
remain off for three hours, at which time they
will begin running the filter cycle. At any time
after the spa jets has been shut off, the pump
will begin cycling the water if the temperature
falls below the minimum setting.
9. SYMPTOM: THE WATER LEVEL DROPS
a. Some water loss due to evaporation is normal.
If rapid water loss occurs, or if you notice wet-
ness on the floor around the hydrotherapy spa,
then the spa shell may have a leak. Contact
your local spa and pool service provider for
repairs.
11. SYMPTOM: NO AIR FLOWS THROUGH THE
MULTI-DIRECTIONAL HYDRO-JETS WHEN
THE AIR CONTROL IS TURNED COUNTER-
CLOCKWISE
b. A clamp or seal inside the pump compartment
may be loose. Check inside the pump compart-
ment for excess water, and watch the pump
unit while it is operating to see if water drips
from any of the plumbing. If you can identify the
location of the leak inside the spa jet unit, tight-
en the clamp or replace the damaged seal.
a. The three multi-directional hydro-jets can be
closed and opened by pushing and pulling the
nozzles. If no air flows through the jets when
the air control is turned counterclockwise, sim-
ply pull the nozzles slightly.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
PART LIST—Model No. 831.105021
R1200A
Key No. Qty.
Description
Key No. Qty.
Description
1
2
3
4
5
6
7
8
8
4
4
4
4
1
1
2
2
2
1
4
1
1
1
2
1
1
1
3
1
1
10
1
2
Buckle Screw
Buckle
#8 x 5/8” Screw
Motor Washer
Rubber Insulator
Blue Lens
26
27
28
29
30
31
32
33
34
35
#
#
#
#
#
#
#
#
#
2
3
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
2
2
4
32
1
Suction Cover
Rubber Washer
O-ring
Drain Plug
Hose Washer
Sensor Fitting Assembly
Diverter Valve
Trim Plate
Foam, Weir
1/2” Plumbing Elbow
Key
Starter Chemical Pack
User’s Manual
Light Bulb
Zip Tie
2” O-Ring
9
Removable Collar
Filter Cartridge
Hose Cap
1/4” x 1 1/4” Screw
Pump Motor
Control Unit
Lock Washer
Heater Gasket
Control Knob
Spa Cover
Red Lens
Multidirectional Jet
Diverter
Basket
#8 x 1 1/2” Screw
Filter Door
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Pregnancy Warning Sign
Drowning Warning Sign, English
Drowning Warning Sign, French
Ground Wire
Water Test Strip
Short Panel
Long Panel
Corner Panel
Panel Screw
General Warning Sign
#
#
#
#
#
Cover Screw
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice.
EXPLODED DRAWING—Model No. 831.105021
R1200A
23
32
33
35
21
19
6
10
11
30
8
34
24
22
20
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWING—Model No. 831.105021
R1200A
18
17
27
20
20
20
26
2
1
25
31
16
2
3
9
13
14
16
12
15
28
4
3
9
29
5
7
21
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
22
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
23
Download from Www.Somanuals.com. All Manuals Search And Download.
ORDERING REPLACEMENT PARTS
To order replacement parts, simply call our Customer Service Department toll-free at SEARS 1-800-4MYHOME
(469-4663), or SEARS 1-877-LEFOYER (533-6937) 24 hours a day. To help us assist you, please be prepared
to give the following information when calling:
• The MODEL NUMBER of the product (831.105021)
• The NAME of the product (IMAGE® RENEW 510 hydrotherapy spa)
• The SERIAL NUMBER of the product (see the front cover of this manual)
• The KEY NUMBER and DESCRIPTION of the desired part(s) (see the PART LIST and the EXPLODED DRAW-
ING on pages 20 and 21).
LIMITED FIVE YEAR MASSAGE SPA WARRANTY
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and
material, under normal use and service conditions, for a period of ninety (90) days from the date of pur-
chase. ICON extends a limited five (5) year warranty on the spa shell structure. ICON also extends a lim-
ited two (2) year warranty on the pump and motor. This warranty extends only to the original purchaser.
ICON's obligation under this warranty is limited to replacing or repairing, at ICON's option, the product
through one of its authorized service centers. All repairs for which warranty claims are made must be pre-
authorized by ICON. This warranty does not extend to any product or damage to a product caused by or
attributable to freight damage, abuse, misuse, improper or abnormal usage, or repairs not provided by
ICON authorized service personnel, to products used for commercial or rental purposes, or to products
used as store display models. Specifically excluded are damages caused by or attributable to the follow-
ing incidents: any damage to the wood exterior resulting from improper maintenance, or any damage to
the wood or tile exterior attributable to freight mishandling; damage resulting from improper winterization;
damage to the spa shell resulting from improper chemical treatment, damage to the spa shell resulting
from exposure to extreme temperatures, or damage to the spa shell resulting from exposure to direct sun-
light and ultraviolet rays while the spa is empty; damage to the pump, motor, plumbing, and components
due to improper maintenance, chemical treatment, or exposure; damage resulting from failure to proper-
ly follow user’s manual installation, operating, or maintenance instructions. Also excluded are consumable
components, including but not restricted to headrests, filter cartridges, and light bulbs. No other warranty
beyond that specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in con-
nection with the use or performance of the product or damages with respect to any economic loss, loss
of or damage to property including water damage, loss of revenues or profits, loss of enjoyment or use,
costs of removal, installation or other consequential damages of whatsoever nature. Some states do not
allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation
may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth
herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above
limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 171083 R1200A
Printed in USA © 2000 ICON Health & Fitness, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|