Scientific Atlanta Stereo System Digital Home Communications Terminal User Guide

®
EXPLORER  
Digital Home Communications Terminal  
User’s Installation Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT RULES FOR SAFE OPERATION,continued  
Cleaning the Equipment  
Ventilation  
Before cleaning this equipment, unplug it from the  
electrical outlet. Use a damp cloth to clean this  
equipment. Do not use a liquid cleaner or an aerosol  
cleaner. Do not use a magnetic/ static cleaning device  
(dust remover) to clean this equipment.  
This equipment has openings for ventilation that protect  
it from overheating. To ensure the reliability of this  
equipment, do not obstruct the openings.  
• Do not place other equipment, lamps, books, or any  
other object on the top of this equipment.  
Placement  
• Do not place this equipment in any of the locations that  
follow:  
Place this equipment in a location that is close enough  
to an electrical outlet to accommodate the length of the  
power cord. Place this equipment on a stable surface.  
The surface must support the size and weight of this  
equipment.  
- On a bed, sofa, rug, or similar surface  
- Over a radiator or a heat register  
- In an enclosure, such as a bookcase or equipment  
rack, unless the installation provides proper  
ventilation  
WARNING:  
WARNING:  
Avoid personal injury and damage to this  
equipment. An unstable surface may cause  
this equipment to fall.  
Avoid electric shock and fire hazard. Never  
push objects through the openings in this  
equipment. Objects can touch dangerous  
voltage points or cause electrical shorts that  
can result in electric shock or fire.  
Accessories  
Do not use accessories with this equipment unless  
recommended by your cable company.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT RULES FOR SAFE OPERATION,continued  
Liquid or Moisture  
Power Sources  
Do not expose this equipment to liquid or moisture. Do  
not place this equipment on a wet surface. Do not spill  
liquids on or near this equipment.  
A label on this equipment indicates the correct power  
source for this equipment. Operate this equipment only  
from an electrical outlet that has the voltage and  
frequency that the label indicates.  
Lightning and Power Surges  
If you are unsure of the type of power supply to your  
residence, consult Scientific-Atlanta, Inc., or your local  
power company.  
Ground (earth) your cable system to provide some  
protection against voltage surges and built-up static  
charges. If you have questions, call your cable company.  
WARNING:  
Servicing  
Avoid electric shock and fire hazard. Do not  
overload electrical outlets and extension cords.  
For equipment that requires battery power or  
other sources to operate, refer to the operating  
instructions for that equipment.  
Do not open the cover of this equipment. If you open the  
cover, your warranty will be void. Refer all servicing to  
qualified personnel only. Contact your cable company  
for instructions.  
Power Cord Protection  
Arrange all power cords so that people cannot walk on  
the cords, place objects on the cords, or place objects  
against the cords, which can damage the cords. Pay  
particular attention to cords that are at plugs, at  
electrical outlets, and at the places where the cords exit  
the equipment.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT RULES FOR SAFE OPERATION,continued  
Grounding  
Damage that Requires Service  
For damage that requires service, unplug this equipment  
from the electrical outlet. Refer service to qualified  
service personnel when any of the following occurs:  
This equipment has a two-prong plug. Properly ground  
(earth) this equipment by inserting the plug into a  
grounded electrical, two-socket outlet. If this plug is  
polarized it has one wide prong and one narrow prong.  
This plug fits only one way.  
• There is damage to the power cord or plug  
• Liquid enters the equipment  
• A heavy object falls on the equipment  
• There is exposure to rain or water  
CAUTION:  
To prevent electric shock, match wide blade of  
plug to wide slot, fully insert.  
• Operation is not normal (the instructions describe the  
proper operation)  
• If you drop this equipment, or damage the cabinet of  
this equipment  
If you are unable to insert this plug fully into the outlet,  
contact an electrician to replace your obsolete outlet.  
• If this equipment exhibits a distinct change in  
performance  
Upon completion of any service or repairs to this  
equipment (home terminal), ask the service technician to  
perform safety checks to determine that the equipment is  
in proper operating condition.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Overview  
Connection Diagrams  
Getting Started ......................................................... 7  
Connecting a Non-Stereo TV ............................... 17  
Connecting a Stereo TV ........................................ 18  
Using This Guide ..................................................... 8  
Selecting Your Connection Diagrams ................... 9  
Explorer DHCT Front Panel ................................. 10  
Explorer DHCT Back Panel .................................. 11  
Using an RF Bypass Module ................................ 14  
Optional Devices ................................ 12 through 16  
Connection Diagrams........................ 17 through 27  
Using the DHCT .................................................... 28  
Tips for Improved Performance .......................... 29  
Notices ..................................................................... 31  
FCC Compliance ..................................... Back cover  
Connecting a Non-Stereo TV and a  
Non-Stereo VCR ..................................................... 19  
Connecting a Non-Stereo TV and a  
Stereo VCR .............................................................. 20  
Connecting a Stereo TV and a  
Non-Stereo VCR ..................................................... 21  
Connecting a Stereo TV and a  
Stereo VCR .............................................................. 22  
Connecting a Stereo TV with S-Video Input ..... 23  
Optional Devices  
Connecting a Stereo TV and VCR with  
S-Video Input ......................................................... 24  
Connecting a VHF Transformer for  
Non-Cable-Ready TV ............................................ 12  
Connecting a Non-Stereo TV, Non-Stereo  
VCR, and Stereo Receiver or Amplifier .............. 25  
Connecting a TV with the PIP Feature  
to a Signal Splitter .................................................. 13  
Connecting a Stereo TV, Stereo VCR, and  
Stereo Receiver or Amplifier ................................ 26  
Using an RF Bypass Module ................................ 14  
Connecting a Digital Audio Decoder ................. 16  
Connecting a Stereo TV, Stereo VCR, and  
Home Theatre Receiver ......................................... 27  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Installation Overview  
Installation Tips  
The following list provides an overview of the  
installation process.  
Follow these tips for proper DHCT operation:  
• Do not plug the DHCT into a wall outlet that is  
controlled by a wall switch. The IPG data does  
not update when the outlet is switched to the off  
position.  
• You can plug your TV into the AC Switched  
Outlet on the back of the DHCT.  
• To ensure proper ventilation, do not place any  
objects on top of the DHCT, including devices  
such as your TV.  
• If your TV is equipped with a picture-in-picture  
(PIP) feature, see the connection diagram on  
page 13.  
1. Determine the electronic devices you must  
connect using the information on page 9.  
2. Connect the DHCT and your electronic devices  
using the diagrams in this guide, based upon  
the information on page 9.  
3. Plug in the DHCT to an AC power source, but  
do not press the Power key on the DHCT.  
4. Set the input channel (3 or 4) on your TV and  
VCR.  
5. Wait for the time to display on the LED. Then,  
press the Power on the DHCT. See page 28 for  
detailed instructions.  
6. Program your remote control to operate your  
TV and VCR. (See your remote control users  
guide.)  
7. Use the IPG to browse and view your program  
preferences. (See the IPG users guide.)  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using This Guide  
Important Messages  
Introducing the Explorer DHCT  
Please read this entire guide before you install or  
operate this equipment. Look for the following  
safety symbol throughout this guide:  
The Explorer® Digital Home Communications  
Terminal (DHCT) is a converter that can view  
analog and digital signals. The Explorer DHCT  
provides exceptional picture quality and an  
Interactive Program Guide (IPG)–an interactive,  
on-screen browsing and program-selecting menu.  
Read the caution or warning that appears with  
each safety symbol throughout this guide.  
This guide provides diagrams of the front and  
back panels of the DHCT, diagrams for connecting  
the DHCT to other electronic devices, basic  
instructions for using the DHCT, and  
CAUTION:  
troubleshooting tips for proper operation.  
Do not place a magnet, or any type  
of magnetic/static dust removal device on or  
near this equipment. Magnetic/static devices  
may affect the operation of this equipment.  
Joining the Explorer Club  
Scientific-Atlanta invites you to join the Explorer  
Club. This online club provides news and “whats  
up” information about the Explorer DHCT and  
offers you a chance to win prizes and other  
premium items.  
About This Guide  
You can access the Explorer Club by logging on to  
the Internet and entering our address  
http:/ / www.scientificatlanta.com. Then, click the  
Explorer user? Join the Explorer Club icon and  
follow the instructions.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting Your Connection Diagrams  
Introduction  
This section provides a list of electronic devices  
that connect to your DHCT. The Optional Devices  
list includes devices that may be required for  
specific combinations of viewing and listening  
preferences. The TV and VCR Setup table  
includes the audio and video options (non-stereo,  
stereo, and S-Video) on your TV and VCR. Identify  
all of your devices, then go to the page number  
shown and use the diagrams and instructions to  
connect your devices to the DHCT.  
• Digital Audio Receiver for surround sound ... 16  
• Stereo Receiver or Amplifier for using  
external speakers ....................................... 25 or 26  
Home Theatre Receiver for using  
external speakers ................................................. 27  
TV and VCR Setup  
Use the table below to find the page number of the  
connection diagrams for your style of TV and VCR.  
Find your TV style in the left column and find your  
VCR style across the top row. The intersection of  
the row and column contains the page number of  
the connection diagram for your specific TV and  
VCR.  
Optional Devices  
Some optional devices must be installed to provide  
specific sound and viewing preferences. Review  
the list and go to the page shown for instructions  
on connecting the device in your system.  
VCR VCR  
VCR  
VCR with  
None Stereo Non-Stereo S-Video Input  
• VHF Transformer for non-cable-ready TV ...... 12  
• RF Splitter for PIP viewing ................................ 13  
• RF Bypass Module for viewing cable  
programming while recording premium  
programming ....................................................... 14  
TV  
Stereo  
18  
17  
22  
20  
21  
19  
n/a  
n/a  
24  
TV  
Non-Stereo  
TV with  
S-Video Input 23  
n/a  
n/a  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Explorer DHCT Front Panel  
1
2
3
4
5 6  
7
8
T8473  
1
2
Smart card slot  
Allows smart card use  
5
6
7
VOL- and VOL+  
(For test)  
Increases or decreases volume  
(For technician use only)  
Message indicator  
Indicates a message is waiting  
when blinking or illuminated  
CH- or CH+  
Scrolls up or down through the  
channels  
3
4
Display  
Displays the channel numbers and  
time of day  
8
Power  
Activates the functions of the  
DHCT  
Bypass indicator  
Indicates optional bypass feature  
is on when illuminated  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Explorer DHCT Back Panel  
CABLE COMMUNICATIONS  
LISTED  
CABLE IN  
CATV CONVERTER  
MADE IN MEXICO  
AUDIO  
CABLE  
OUT  
DIGITAL  
AUDIO  
L
C
S-VIDEO VIDEO  
14141  
THIS DEVICE IS INTENDED TO BE ATTACHED  
TO RECEIVER THAT IS NOT USED TO RECEIE  
A
OVER-THE-AIR BROADCAST SIGNALS.  
BYPASS  
CONNECTION OF THIS DEVICE IN ANY OTHER  
FASHION MAY CAUSE HARMFUL INTERFERENCE  
TO RADIO COMMUNICATIONS AND IS IN  
VIOLATION OF THE FCC RULES, PART 15.  
120 VAC  
60Hz 40W  
120 VAC  
6Hz 5A  
R
OUT  
DATA  
OUT  
OUT  
OUT  
USB  
1394  
1394  
ETHERNET  
T8474  
1
2
3
4
5
6
7
8
9
10 11  
12 13  
Note: The back panel of your DHCT may vary slightly.  
7 Video Out  
Connect to video input of TV or VCR  
8 Audio Out  
Connect to left/ right audio channels of  
a stereo receiver or a TV with stereo sound  
1 Ethernet  
Connect an Ethernet-equipped computer,  
optional  
(L/ R)  
9 Cable Out  
Connect to cable input of TV or VCR  
2 USB  
Connect external equipment  
(Universal Serial Bus)  
10 Cable In  
Connect to cable signal from cable service  
provider  
3 1394  
Connect 1394-equipped devices, optional  
11 Bypass  
Connect an optional RF Bypass module  
(See page 14.)  
4 Digital  
Connect external digital surround-sound  
Audio Out receiver  
12 AC Power  
Connect the DHCT to an AC electrical outlet  
5 Data  
Connect optional VCR CommanderTM  
module (contact your cable service provider  
for information) or similar equipment  
Input  
13 AC Switched Connect the AC power cord from another  
Outlet device, such as a TV  
6 S-Video  
Connect to S-Video input of TV or VCR  
Out  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optional Devices  
Connecting a VHF Transformer for Non-Cable-Ready TV  
If your TV is not cable ready, follow these steps to  
connect a VHF transformer.  
Connect to CABLE OUT on DHCT  
or to OUT TO TV on VCR  
1
After you connect the transformer, your TV is  
considered “cable ready” and you can connect  
additional electronic devices to your TV and the  
DHCT.  
Connect VHF transformer  
2
3
Continue with connecting your TV to the DHCT  
and any other devices in system.  
Connect VHF antenna terminals on  
TV  
4
Do not use  
Back of TV  
T8475  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optional Devices, continued  
Connecting a TV with the PIP Feature to a Signal Splitter  
Explorer DHCT  
Required Cables  
Set of Video/  
1
CABLE COMMUNICATIONS  
LISTED  
Stereo Audio Cables  
CABLE IN  
CATV CONVERTER  
MADE IN MEXICO  
AUDIO  
OUT  
2
75 Coaxial Cables  
CABLE  
OUT  
DIGITAL  
AUDIO  
L
C
S-VIDEO VIDEO  
14141  
THIS DEVICE IS INTENDED TO BE ATTACHED  
TO RECEIVER THAT IS NOT USED TO RECEIVE  
OVER-THE-AIR BROADCAST SIGNALS.  
CONNECTION OF THIS DEVICE IN ANY OTHER  
FASHION MAY CAUSE HARMFUL INTERFERENCE  
TO RADIO COMMUNICATIONS AND IS IN  
VIOLATION OF THE FCC RULES, PART 15.  
A
BYPASS  
120 VAC  
60Hz 40W  
120 VAC  
60Hz 5A  
R
OUT  
DATA  
OUT  
OUT  
USB  
1394  
1394  
ETHERNET  
Back of TV  
Splitter  
L
R
L
R
RF IN  
Out  
Cable  
Input  
VIDEO  
IN 1  
AUDIO  
IN 1  
VIDEO  
IN 2  
AUDIO  
IN 2  
In  
Out  
T8532  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optional Devices, continued  
Connecting the Module  
Using an RF Bypass Module  
Follow these steps to connect an RF Bypass module to  
the DHCT.  
When you use the Bypass feature, the regular  
(analog) cable signal bypasses the Explorer DHCT  
and goes directly to your TV, which allows you to  
view any regular cable program. At the same  
time, the DHCT sends cable signals to your VCR,  
and you can record any channel to which the  
DHCT is tuned, including premium or pay-per-  
view channels.  
CAUTION: Unplug the AC power cord and  
disconnect all cables attached to the DHCT.  
1 Unplug AC power cord.  
CABLE COMMUNICATIONS  
CABLE IN  
LISTED  
2 Bend the metal tab labeled  
C
When you disable the Bypass feature, both your  
VCR and TV can receive cable signals from the  
Explorer DHCT.  
14141  
BYPASS toward you.  
Important: Pull off the tab  
and dispose of safely.  
BYPASS  
120 VAC  
120 VAC  
60Hz 5A  
60Hz 40W  
2
1
3
Note: After installing the Bypass module, tune  
the VCR input to the Explorer DHCTs output  
channel (channel 3 or 4).  
3 With the Bypass module  
labels facing up and toward  
you, insert the multicable  
connector into the DHCT.  
4
4 Insert the CABLE IN  
connector on the Bypass  
module into the CABLE IN  
connector on the DHCT.  
Bypass Module  
(Inside View)  
T8476  
Note: Fold the multicable connector into the inside  
of the Bypass module.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optional Devices, continued  
VCR  
TV  
Cable Input  
From Wall  
Activating and Deactivating RF Bypass  
OUT TO IN FROM  
CABLE/  
TV  
ANT.  
ANTENNA  
If your remote control includes a Bypass key, follow these  
instructions to use the Bypass feature.  
6
7
To activate the Bypass feature, press the Bypass  
key. The Bypass indicator illuminates on the DHCT.  
LE COMMUNICATIONS  
MODEL E2051-X01  
Notes:  
LISTED  
TO  
TV  
You can only view analog channels; digital channels are  
not available while the Bypass feature is active.  
Use the Bypass key to toggle the feature on and off.  
CABLE  
OUT  
C
14141  
CABLE  
FROM  
VCR  
INPUT  
120 VAC  
120 VAC  
60Hz 5A  
5
60Hz 40W  
To deactivate the Bypass feature:  
Bypass Module Attached to  
EXPLORER DHCT  
1. Press the Bypass key on the remote control. The Bypass  
indicator no longer illuminates on the Explorer DHCT.  
2. Tune your TV using one of the following methods:  
• If the TV/ VCR switch on your VCR is in the VCR  
position, you must tune your TV to the VCR output  
channel (channel 3 or 4). You can view a tape, or you  
can view the channel to which the Explorer DHCT is  
tuned.  
T8620  
5 Align the mounting tabs with the screw holes.  
Tighten the screws; do not overtighten.  
6 Connect to your TV and VCR.  
7 Connect your cable input from the wall.  
8 Connect any additional devices, if applicable.  
9 Do you have other devices to connect?  
• If yes, see page 9 to locate other connec-  
tion diagrams appropriate for your system.  
• If no, plug in the power cord to an AC  
power outlet.  
• If the TV/ VCR switch on your VCR is in the TV  
position, you must tune your TV to the Explorer  
DHCT output channel (channel 3 or 4). You can only  
view programs from the Explorer DHCT, regardless  
of what your VCR is playing.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optional Devices, continued  
Connecting a Digital Audio Decoder  
Cable Input  
Explorer DHCT  
Required Cables  
75 Digital Audio  
Coaxial Cable  
1
CABLE COMMUNICATIONS  
CABLE IN  
LISTED  
CATV CONVERTER  
MADE IN MEXICO  
AUDIO  
OUT  
CABLE  
OUT  
DIGITAL  
AUDIO  
L
C
S-VIDEO VIDEO  
14141  
THIS DEVICE IS INTENDED TO BE ATTACHED  
TO RECEIVER THAT IS NOT USED TO RECEIVE  
OVER-THE-AIR BROADCAST SIGNALS.  
CONNECTION OF THIS DEVICE IN ANY OTHER  
FASHION MAY CAUSE HARMFUL INTERFERENCE  
TO RADIO COMMUNICATIONS AND IS IN  
VIOLATION OF THE FCC RULES, PART 15.  
A
BYPASS  
Note: See page 9 to locate  
additional connection  
diagrams appropriate for  
your system.  
120 VAC  
60Hz 40W  
120 VAC  
60Hz 5A  
R
OUT  
DATA  
OUT  
OUT  
USB  
1394  
1394  
ETHERNET  
Back of Digital  
Audio Decoder  
DIGITAL  
AUDIO IN  
(COAXIAL)  
T8480  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connection Diagrams  
Connecting a Non-Stereo TV  
Cable Input  
Explorer DHCT  
Required Cables  
75 Coaxial Cable  
1
CABLE COMMUNICATIONS  
CABLE IN  
LISTED  
CATV CONVERTER  
MADE IN MEXICO  
AUDIO  
OUT  
CABLE  
OUT  
DIGITAL  
AUDIO  
L
C
S-VIDEO VIDEO  
14141  
THIS DEVICE IS INTENDED TO BE ATTACHED  
TO RECEIVER THAT IS NOT USED TO RECEIVE  
OVER-THE-AIR BROADCAST SIGNALS.  
CONNECTION OF THIS DEVICE IN ANY OTHER  
FASHION MAY CAUSE HARMFUL INTERFERENCE  
TO RADIO COMMUNICATIONS AND IS IN  
VIOLATION OF THE FCC RULES, PART 15.  
A
BYPASS  
Note: Audio output from  
the DHCT CABLE OUT is  
monaural (non-stereo).  
120 VAC  
60Hz 40W  
120 VAC  
60Hz 5A  
R
OUT  
DATA  
OUT  
OUT  
USB  
1394  
1394  
ETHERNET  
Back of TV  
CABLE/  
ANTENNA  
T8615  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connection Diagrams, continued  
Connecting a Stereo TV  
Cable Input  
Explorer DHCT  
Required Cables  
Set of Video/  
Stereo Audio Cables  
1
CABLE COMMUNICATIONS  
CABLE IN  
LISTED  
CATV CONVERTER  
MADE IN MEXICO  
AUDIO  
OUT  
CABLE  
OUT  
DIGITAL  
AUDIO  
L
C
S-VIDEO VIDEO  
14141  
THIS DEVICE IS INTENDED TO BE ATTACHED  
TO RECEIVER THAT IS NOT USED TO RECEIVE  
OVER-THE-AIR BROADCAST SIGNALS.  
CONNECTION OF THIS DEVICE IN ANY OTHER  
FASHION MAY CAUSE HARMFUL INTERFERENCE  
TO RADIO COMMUNICATIONS AND IS IN  
VIOLATION OF THE FCC RULES, PART 15.  
A
BYPASS  
120 VAC  
60Hz 40W  
120 VAC  
60Hz 5A  
R
OUT  
DATA  
OUT  
OUT  
USB  
1394  
1394  
ETHERNET  
Back of TV  
LEFT  
OUT  
IN  
CABLE/  
ANTENNA  
AUDIO  
VIDEO  
OUT IN  
OUT  
IN  
RIGHT  
T8616  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connection Diagrams, continued  
Connecting a Non-Stereo TV and a Non-Stereo VCR  
Explorer DHCT  
Cable Input  
Required Cables  
75 Coaxial Cables  
2
CABLE COMMUNICATIONS  
CABLE IN  
LISTED  
CATV CONVERTER  
MADE IN MEXICO  
AUDIO  
OUT  
CABLE  
OUT  
DIGITAL  
AUDIO  
L
C
S-VIDEO VIDEO  
14141  
THIS DEVICE IS INTENDED TO BE ATTACHED  
TO RECEIVER THAT IS NOT USED TO RECEIVE  
OVER-THE-AIR BROADCAST SIGNALS.  
CONNECTION OF THIS DEVICE IN ANY OTHER  
FASHION MAY CAUSE HARMFUL INTERFERENCE  
TO RADIO COMMUNICATIONS AND IS IN  
VIOLATION OF THE FCC RULES, PART 15.  
Notes: Audio output  
from the DHCT CABLE  
OUT is monaural (non-  
stereo).  
A
BYPASS  
120 VAC  
60Hz 40W  
120 VAC  
60Hz 5A  
R
OUT  
DATA  
OUT  
OUT  
USB  
1394  
1394  
ETHERNET  
Back of TV  
Back of VCR  
CABLE/  
ANTENNA  
IN FROM ANT.  
OUT TO TV  
T8479  
To TV  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connection Diagrams, continued  
Connecting a Non-Stereo TV and Stereo VCR  
Cable Input  
Explorer DHCT  
Required Cables  
75 Coaxial Cables  
2
CABLE COMMUNICATIONS  
CABLE IN  
LISTED  
CATV CONVERTER  
MADE IN MEXICO  
AUDIO  
OUT  
CABLE  
OUT  
DIGITAL  
AUDIO  
L
C
S-VIDEO VIDEO  
14141  
THIS DEVICE IS INTENDED TO BE ATTACHED  
TO RECEIVER THAT IS NOT USED TO RECEIVE  
OVER-THE-AIR BROADCAST SIGNALS.  
CONNECTION OF THIS DEVICE IN ANY OTHER  
FASHION MAY CAUSE HARMFUL INTERFERENCE  
TO RADIO COMMUNICATIONS AND IS IN  
VIOLATION OF THE FCC RULES, PART 15.  
A
BYPASS  
120 VAC  
60Hz 40W  
120 VAC  
60Hz 5A  
Note: This setup provides  
monaural (non-stereo)  
sound only. To listen to  
stereo sound, you must  
add a device with stereo  
speakers.  
R
OUT  
DATA  
OUT  
OUT  
USB  
1394  
1394  
ETHERNET  
Back  
Back  
of TV  
of VCR  
LEFT  
OUT  
VIDEO  
OUT IN  
CABLE/  
ANTENNA  
IN  
IN FROM ANT.  
OUT TO TV  
RIGHT  
T8613  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connection Diagrams, continued  
Connecting a Stereo TV and Non-Stereo VCR  
Cable Input  
Explorer DHCT  
Required Cables  
Set of Video/  
1
2
CABLE COMMUNICATIONS  
CABLE IN  
Stereo Audio Cables  
LISTED  
CATV CONVERTER  
MADE IN MEXICO  
AUDIO  
OUT  
CABLE  
OUT  
75 Coaxial Cables  
DIGITAL  
AUDIO  
L
C
S-VIDEO VIDEO  
14141  
THIS DEVICE IS INTENDED TO BE ATTACHED  
TO RECEIVER THAT IS NOT USED TO RECEIVE  
OVER-THE-AIR BROADCAST SIGNALS.  
CONNECTION OF THIS DEVICE IN ANY OTHER  
FASHION MAY CAUSE HARMFUL INTERFERENCE  
TO RADIO COMMUNICATIONS AND IS IN  
VIOLATION OF THE FCC RULES, PART 15.  
A
BYPASS  
120 VAC  
60Hz 40W  
120 VAC  
60Hz 5A  
R
Notes:  
OUT  
DATA  
OUT  
OUT  
USB  
1394  
1394  
ETHERNET  
• If you connect to  
S-VIDEO OUT, you must  
connect the LEFT and  
RIGHT AUDIO OUT on  
the DHCT to the LEFT  
and RIGHT AUDIO IN  
connectors on your TV,  
VCR, or stereo. (This  
diagram shows a stereo  
TV connection.)  
• Audio output from the  
DHCT CABLE OUT is  
monaural (non-stereo).  
• Audio output from the  
DHCT AUDIO OUT  
LEFT and RIGHT is  
stereo.  
Back of VCR  
Back of TV  
LEFT  
OUT  
IN  
CABLE/  
ANTENNA  
IN FROM ANT.  
OUT TO TV  
AUDIO  
VIDEO  
OUT IN  
OUT  
IN  
RIGHT  
To TV  
T8478  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connection Diagrams, continued  
Connecting a Stereo TV and Stereo VCR  
Cable Input  
Explorer DHCT  
Required Cables  
Sets of Video/  
Stereo Audio Cables  
2
CABLE COMMUNICATIONS  
CABLE IN  
LISTED  
CATV CONVERTER  
MADE IN MEXICO  
AUDIO  
OUT  
CABLE  
OUT  
DIGITAL  
AUDIO  
L
C
S-VIDEO VIDEO  
14141  
THIS DEVICE IS INTENDED TO BE ATTACHED  
TO RECEIVER THAT IS NOT USED TO RECEIVE  
OVER-THE-AIR BROADCAST SIGNALS.  
CONNECTION OF THIS DEVICE IN ANY OTHER  
FASHION MAY CAUSE HARMFUL INTERFERENCE  
TO RADIO COMMUNICATIONS AND IS IN  
VIOLATION OF THE FCC RULES, PART 15.  
A
BYPASS  
120 VAC  
60Hz 40W  
120 VAC  
60Hz 5A  
R
OUT  
DATA  
OUT  
OUT  
USB  
1394  
1394  
ETHERNET  
Back  
of VCR  
Back of TV  
LEFT  
OUT  
LEFT  
OUT  
VIDEO 1  
OUT IN  
IN  
CABLE/  
ANTENNA  
IN  
IN FROM ANT.  
OUT TO TV  
AUDIO  
VIDEO  
OUT IN  
OUT  
IN  
RIGHT  
RIGHT  
Video  
To TV  
Audio  
To TV  
T8614  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connection Diagrams, continued  
Connecting a Stereo TV with S-Video Input  
Cable Input  
Explorer DHCT  
Required Cables  
S-Video Cable  
1
1
CABLE COMMUNICATIONS  
CABLE IN  
Stereo/Audio Cable
LISTED  
CATV CONVERTER  
MADE IN MEXICO  
AUDIO  
OUT  
CABLE  
OUT  
DIGITAL  
AUDIO  
L
C
S-VIDEO VIDEO  
14141  
THIS DEVICE IS INTENDED TO BE ATTACHED  
TO RECEIVER THAT IS NOT USED TO RECEIVE  
OVER-THE-AIR BROADCAST SIGNALS.  
CONNECTION OF THIS DEVICE IN ANY OTHER  
FASHION MAY CAUSE HARMFUL INTERFERENCE  
TO RADIO COMMUNICATIONS AND IS IN  
VIOLATION OF THE FCC RULES, PART 15.  
A
BYPASS  
120 VAC  
60Hz 40W  
120 VAC  
60Hz 5A  
R
Notes:  
OUT  
DATA  
OUT  
OUT  
USB  
1394  
1394  
ETHERNET  
• If you connect to  
S-VIDEO OUT, you  
must also connect the  
LEFT and RIGHT  
Back of TV  
LEFT  
OUT  
S-VIDEO  
IN  
IN  
CABLE/  
ANTENNA  
AUDIO  
OUT IN  
VIDEO  
OUT  
IN  
AUDIO OUT on the  
DHCT to the LEFT and  
RIGHT AUDIO IN  
connectors on your TV,  
VCR, or stereo. (The  
diagram shows a stereo  
TV connection.)  
T8481  
RIGHT  
• See page 9 to locate  
other connection  
diagrams appropriate  
for your system.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connection Diagrams, continued  
Connecting a Stereo TV and Stereo VCR with S-Video Input  
Explorer DHCT  
Cable Input  
Required Cables  
S-Video Cables  
2
2
CABLE COMMUNICATIONS  
CABLE IN  
Stereo/Audio Cables  
LISTED  
CATV CONVERTER  
MADE IN MEXICO  
AUDIO  
OUT  
CABLE  
OUT  
DIGITAL  
AUDIO  
L
C
S-VIDEO VIDEO  
14141  
THIS DEVICE IS INTENDED TO BE ATTACHED  
TO RECEIVER THAT IS NOT USED TO RECEIVE  
OVER-THE-AIR BROADCAST SIGNALS.  
CONNECTION OF THIS DEVICE IN ANY OTHER  
FASHION MAY CAUSE HARMFUL INTERFERENCE  
TO RADIO COMMUNICATIONS AND IS IN  
VIOLATION OF THE FCC RULES, PART 15.  
A
BYPASS  
120 VAC  
60Hz 40W  
120 VAC  
60Hz 5A  
R
Notes:  
OUT  
DATA  
OUT  
OUT  
USB  
1394  
1394  
ETHERNET  
• If you connect to  
S-VIDEO OUT, you  
must connect the LEFT  
and RIGHT AUDIO  
OUT on the DHCT to  
the LEFT and RIGHT  
AUDIO IN connectors  
on your TV, VCR, or  
stereo. (This diagram  
shows a stereo TV  
connection.)  
Back  
Back of TV  
of VCR  
LEFT  
OUT  
S-VIDEO  
LEFT  
S-VIDEO  
OUT IN  
IN  
IN  
CABLE/  
ANTENNA  
OUT  
IN  
IN FROM ANT.  
OUT TO TV  
AUDIO  
OUT IN  
VIDEO  
OUT  
IN  
RIGHT  
RIGHT  
T8612  
• See page 9 to locate  
other connection  
diagrams appropriate  
for your system.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connection Diagrams, continued  
Connecting a Non-Stereo TV, Non-Stereo VCR, and Stereo Receiver or Amplifier  
Cable Input  
Explorer DHCT  
Required Cables  
Stereo/Audio Cables  
75 Coaxial Cables  
1
2
CABLE COMMUNICATIONS  
CABLE IN  
LISTED  
CATV CONVERTER  
MADE IN MEXICO  
AUDIO  
OUT  
CABLE  
OUT  
DIGITAL  
AUDIO  
L
C
S-VIDEO VIDEO  
14141  
THIS DEVICE IS INTENDED TO BE ATTACHED  
TO RECEIVER THAT IS NOT USED TO RECEIVE  
OVER-THE-AIR BROADCAST SIGNALS.  
CONNECTION OF THIS DEVICE IN ANY OTHER  
FASHION MAY CAUSE HARMFUL INTERFERENCE  
TO RADIO COMMUNICATIONS AND IS IN  
VIOLATION OF THE FCC RULES, PART 15.  
A
BYPASS  
120 VAC  
60Hz 40W  
120 VAC  
60Hz 5A  
R
OUT  
DATA  
OUT  
OUT  
USB  
1394  
1394  
ETHERNET  
Back of  
Stereo  
Receiver/  
Amplifier  
Back of VCR  
Back of TV  
LEFT  
OUT  
IN  
IN  
CABLE/  
ANTENNA  
IN FROM ANT.  
OUT TO TV  
AUDIO  
OUT  
R1GHT  
T8483  
To TV  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connection Diagrams, continued  
Connecting a Stereo TV, Stereo VCR, and Stereo Receiver or Amplifier  
Cable Input  
Explorer DHCT  
Required Cables  
Sets of Video/  
Stereo Audio Cables  
2
CABLE COMMUNICATIONS  
CABLE IN  
LISTED  
CATV CONVERTER  
MADE IN MEXICO  
AUDIO  
OUT  
Stereo/Audio Cables  
1
CABLE  
OUT  
DIGITAL  
AUDIO  
L
C
S-VIDEO VIDEO  
14141  
THIS DEVICE IS INTENDED TO BE ATTACHED  
TO RECEIVER THAT IS NOT USED TO RECEIVE  
OVER-THE-AIR BROADCAST SIGNALS.  
CONNECTION OF THIS DEVICE IN ANY OTHER  
FASHION MAY CAUSE HARMFUL INTERFERENCE  
TO RADIO COMMUNICATIONS AND IS IN  
VIOLATION OF THE FCC RULES, PART 15.  
A
BYPASS  
120 VAC  
60Hz 40W  
120 VAC  
60Hz 5A  
R
OUT  
DATA  
OUT  
OUT  
USB  
1394  
1394  
ETHERNET  
Back of Stereo  
Receiver/Amplifier  
Back  
of VCR  
Back of TV  
LEFT  
OUT  
LEFT  
OUT  
LEFT  
OUT  
VIDEO 1  
OUT IN  
IN  
IN  
CABLE/  
ANTENNA  
IN  
IN FROM ANT.  
OUT TO TV  
AUDIO  
AUDIO  
VIDEO  
OUT IN  
OUT  
IN  
OUT  
IN  
RIGHT  
RIGHT  
RIGHT  
T8482  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connection Diagrams, continued  
Connecting a Stereo TV, Stereo VCR, and Home Theatre Receiver  
Cable Input  
Required Cables  
Explorer DHCT  
Sets of Video/  
4
1
2
Stereo Audio Cables  
CABLE COMMUNICATIONS  
CABLE IN  
75 Digital Audio  
Coaxial Cable  
LISTED  
CATV CONVERTER  
MADE IN MEXICO  
AUDIO  
OUT  
CABLE  
OUT  
DIGITAL  
AUDIO  
L
C
S-VIDEO VIDEO  
14141  
THIS DEVICE IS INTENDED TO BE ATTACHED  
TO RECEIVER THAT IS NOT USED TO RECEIVE  
OVER-THE-AIR BROADCAST SIGNALS.  
CONNECTION OF THIS DEVICE IN ANY OTHER  
FASHION MAY CAUSE HARMFUL INTERFERENCE  
TO RADIO COMMUNICATIONS AND IS IN  
VIOLATION OF THE FCC RULES, PART 15.  
A
75 Coaxial Cables  
BYPASS  
120 VAC  
60Hz 40W  
120 VAC  
60Hz 5A  
R
OUT  
DATA  
OUT  
OUT  
USB  
1394  
1394  
ETHERNET  
Back of Home  
Theatre Receiver  
L
R
L
R
L
R
DIGITAL  
AUDIO  
IN 2  
VIDEO  
IN 2  
AUDIO  
IN 2  
DIGITAL  
AUDIO  
IN 1  
VIDEO  
IN 1  
AUDIO  
IN 1  
VIDEO  
AUDIO  
FROM VCR FROM VCR  
L
R
LOUDSPEAKER OUTPUTS  
MONITOR/TV  
OUT  
RECORD  
VIDEO  
OUT  
RECORD  
AUDIO  
OUT  
Back of TV  
RF IN  
Back  
of  
VCR  
LEFT  
OUT  
IN  
CABLE/  
ANTENNA  
L
R
L
R
AUDIO  
VIDEO  
OUT IN  
RF OUT  
OUT  
IN  
VIDEO  
IN  
AUDIO  
IN  
VIDEO  
OUT  
AUDIO  
OUT  
RIGHT  
T8562  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the DHCT  
Connecting the DHCT  
Operating the DHCT  
After you connect the DHCT and any additional  
electronic devices in your system, follow these  
steps:  
Choose one of the following options to operate the  
DHCT:  
• Press the Power key on the front panel of the  
DHCT.  
1. Verify that the DHCT is connected to the 75 W  
coaxial cable coming from the wall.  
• Use your remote control keys. (Refer to your  
remote control users guide for instructions on  
which key or combination of keys to press.)  
2. Plug the DHCT and other devices into your AC  
power source.  
Important: Do not press the Power key on the  
DHCT.  
Control the volume and select channels using the  
keys on the front panel of the DHCT or the remote  
control keys.  
3. Turn on the power to your TV and VCR, and  
tune your TV and VCR to the input channel  
assigned by your cable service provider (channel  
3 or 4).  
Using the IPG, Remote Control, and  
VCR Commander Module  
4. Wait for the time to display on the LED.  
5. Press the Power key on the DHCT.  
Read the users guides that your cable service  
provider included with the DHCT installation  
package. These guides provide operating  
instructions for using the IPG, your remote  
control, and the VCR Commander module (if  
available).  
6. Program your remote control to operate your TV  
and VCR. (For instructions see your remote  
control users guide.)  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tips for Improved Performance  
No sound  
Check and Correct  
Properly plug your TV and DHCT into an  
If your DHCT does not perform as expected,  
the following tips may help. If you need further  
assistance, contact your cable service provider.  
electrical outlet.  
• Verify that all cables are properly connected.  
• Verify that the power to your TV is on.  
No picture  
• If your setup includes a VCR and/ or stereo,  
verify that you have properly connected them  
to the DHCT.  
• Plug your TV and DHCT into an electrical  
outlet that is not controlled by a wall switch.  
• Verify that all cables are properly connected.  
• Verify that the power to your TV is turned on.  
• Verify that your TV is tuned to the proper  
output channel (3 or 4).  
• Verify that the volume is turned up.  
• If your system includes a VCR and/ or stereo,  
verify that you have properly connected them  
to the DHCT.  
• Verify that the Bypass feature is disabled. See  
Using an RF Bypass Module for more  
information.  
• Verify that your TV is tuned to the proper  
output channel (3 or 4).  
No color  
• Verify that the Bypass feature is disabled. See  
Using an RF Bypass Module for more  
information.  
• Make sure the current TV program is  
broadcast in color.  
• Adjust the TV color controls.  
Distorted picture  
Verify that all cables are properly connected.  
• Adjust the TV to channel 3 or 4.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tips for Improved Performance, continued  
DHCT does not work  
Channel banner displays ??? (question marks)  
instead of the channel number  
• Verify that the DHCT is properly plugged into  
an electrical outlet that is not controlled by a  
wall switch.  
Press the INFO key on the remote control. You  
may have pressed the Power key before all of  
the data for the IPG was received by the  
DHCT.  
• Verify that all cables are properly connected.  
• If the electrical outlet is controlled by a wall  
switch, make sure the switch is in the ON  
position.  
TV screen displays a message indicating that the  
DHCT is automatically updating its software  
Wait for the time to display on the LED before  
continuing with your installation process.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notices  
Trademarks  
Software Use Notice  
Scientific-Atlanta, Scientific-Atlanta ARCs Logo, and  
Scientific-Atlanta, Inc. owns copyrights to the software  
described in this document and furnishes the software to you  
under a license agreement. You may only use or copy this  
software in accordance with the terms of your license  
agreement.  
EXPLORER are registered trademarks of Scientific-Atlanta,  
Inc. VCR Commander is a trademark of Scientific-Atlanta,  
Inc.  
Other trademarks listed herein are the property of their  
respective owners.  
Firmware Use Notice  
Scientific-Atlanta, Inc. owns copyrights to the firmware in this  
equipment. You may only use the firmware in the equipment  
in which it is provided. Any reproduction or distribution of  
this firmware, or any portion of it, without the express written  
consent of Scientific-Atlanta, Inc. is prohibited.  
Disclaimer  
Scientific-Atlanta, Inc. assumes no responsibility for errors or  
omissions that may appear in this guide. Scientific-Atlanta  
reserves the right to change this guide at any time without  
notice.  
Documentation Copyright Notice  
© 2000 Scientific-Atlanta, Inc. All rights reserved.  
Printed in the United States of America.  
Information in this document is subject to change without  
notice. No part of this document may be reproduced in any form  
without the express written permission of Scientific-Atlanta, Inc.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
United States FCC Compliance  
FCC Declaration of Conformity  
This equipment has been tested and found to comply with the  
applicable limits of Part 15 of FCC Rules. These limits are  
designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment  
generates, uses, and can radiate radio frequency energy and,  
if not installed and used in accordance with the instructions,  
may cause harmful interference to radio or TV reception,  
which can be determined by turning the equipment off and  
on, the user is encouraged to try to correct the interference by  
one or more of the following measures:  
This device complies with Part 15 of FCC Rules. Operation is  
subject to the following two conditions: 1) the device may not  
cause harmful interference, and 2) the device must accept any  
interference received, including interference that may cause  
undesired operation.  
EXPLORER® Digital Home Communications Terminal models:  
Model E2000 and E3000  
Manufactured by: Scientific-Atlanta, Inc.;  
4261 Communications Drive;  
Atlanta, Georgia 30093-2860; USA  
Telephone within US: 1-800-722-2009 (toll-free)  
Telephone outside US: +1-770-903-5400 (direct)  
• Increase the separation between the equipment and receiver  
• Connect the equipment into an outlet on a circuit different  
from that to which the receiver is connected  
• Consult your cable company or an experienced radio/ TV  
technician for help  
Any changes or modifications not expressly approved by  
Scientific-Atlanta could void the users authority to operate  
the equipment.  
Canada EMI Regulation  
This Class B digital apparatus meets all requirements of the  
Canadian Interference Causing Equipment Regulations.  
Cet appareil numérique de la classe B respecte toutes les  
exigences du Réglement sur le matériel brouilleur du  
Canada.  
Important: The information shown in the FCC Declaration of  
Conformity paragraph below is a requirement of the FCC and  
is intended to supply you with information regarding the  
FCC approval of this device. The phone numbers listed are for  
FCC-related questions only and not intended for questions  
regarding the connection or operation for this device. Please contact  
your cable service provider for any questions you may have  
regarding the operation or installation of this device.  
United States: 4261 Communications Drive, P.O. Box 6850, Norcross,  
GA 30091-6850; Tel: 770-903-5000; TWX: 810-799-4912; Telex: 0542898  
Europe: Home Park Estate, Kings Langley, Herts WD4 8LZ, England;  
Tel: +44-1-923-266133; Fax: +44-1-923-269018  
Asia-Pacific: Scientific-Atlanta Western Europe Limited, Suite 56-57,  
5/F New Henry House, 10 Ice House Street, Central, Hong Kong;  
Tel: 852-2522-5059; Fax: 852-2522-5624  
© 2000 Scientific-Atlanta, Inc. All rights reserved.  
February 2000 Part Number 565069 Rev H  
www.scientificatlanta.com  
Printed in USA  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  

PYLE Audio Stereo Equalizer ple420p User Guide
Radio Shack Cell Phone Accessories 23 1470RC User Guide
RCA Clock Radio RC107 User Guide
RCA Food Warmer SJT 400 User Guide
RCA VCR BLD 6HD1 User Guide
Ricoh Printer MP 2000L User Guide
Samsung Cell Phone CRT_SCH R730 User Guide
Sanyo Battery Charger CR17335 User Guide
Seagate Computer Monitor ST136475LW LC User Guide
Sears Sewing Machine 38511608 User Guide