CYLINDERS,KEYS
AND KEY CONTROL
Download from Www.Somanuals.com. All Manuals Search And Download.
C YL I N D E R S , K E YS A N D K E Y C O N T R O L
Specifications
Certifications
Key Control Patents*:
ANSI:
Everest and Primus cylinders and keys are covered by
20-500 High Security cylinder – A156.5, Grade 1.
one or more of the following U.S. utility patents:
20-700 Controlled Access cylinder – ANSI A156.5, Grade 1
Operational.
4,756,177
4,815,307
5,715,717
5,809,816
UL / ULC:
20-500 Series Primus cylinders are UL437 Listed Locking
Cylinders.
For international Patent coverage information, please
contact Schlage Commercial Customer Service.
Materials:
Cylinder plug and shell are brass. Bottom pins, finger
pins, sidebar, and keys are nickel silver. Top pins and
master pins are brass.
Standard Keying:
All Primus cylinders have six conventional pins and five
finger pins. Everest C123 keyway standard with two
keys per cylinder.
Keying Options:
Interchangeable core cylinders. Master keying, grand
master keying, and construction keying.
Warranty:
Three-year limited.
Software:
Primus Cylinders can be used in conjunction with
®
SITEMASTER 200 key control management software,
for highly effective key control.
*Any infringement of these patents will be forcefully defended in the
courts of law by the Schlage Lock Company.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
C YL I N D E R S , K E YS A N D K E Y C O N T R O L
Primus Flexibility
Unlike many other brands of high security cylinders, Schlage can easily integrate Primus UL 437 Listed cylinders, Primus
Controlled Access cylinders, and Schlage conventional cylinders all into the same key system, and this happens with no
adverse affects on keying capacity!
Primus keys will operate conventional cylinders but conventional keys will not operate Primus cylinders. You can secure
exterior doors and sensitive areas with Primus cylinders and use conventional cylinders on the remaining doors. This cuts the
cost of the overall job.
Security can be tailored to meet the exact needs of each door without sacrificing the convenience of having a single building
master key.
Everest Primus Key
(will operate both cylinders)
Everest Primus
Cylinder
Conventional
Everest Cylinder
Conventional Everest Key
(will not operate Everest Primus cylinder)
X
Note: Everest Primus keys are compatible with Everest C Family Open or
Everest D Family Restricted key systems.
Performance Features
The Schlage Primus High Security cylinder is precision built to extremely close tolerances and the highest standards of quality.
These “dual-locking” cylinders consist of two independent locking mechanisms, operated by a single specially designed
Primus key. In addition to a standard 6 pin tumbler mechanism there is a locking sidebar which is independently controlled
by a set of 5 fingerpins that interface with the side bitting on the patented Primus key.
Primus cylinders are offered in two different versions. The 20-500 High Security series which is UL Listed and the 20-700
Controlled Access series which offers the same key control protection when UL Listed cylinders are not necessary. Both series
are fully compatible in application and can be combined into the same master key system, along with other Schlage
conventional cylinders. For added flexibility, all Primus cylinders can be retrofitted into existing Schlage locks as well as
many competitive products.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
C YL I N D E R S , K E YS A N D K E Y C O N T R O L
Choose the Right Cylinder for Each Application
Conventional (Standard) Cylinders
Interchangeable Core (IC) Cylinders
®
Schlage locks are provided with cylinders precision built
For use where fast rekeying by non-technical personnel is
desired, Schlage Primus and conventional interchangeable
cores offer a great blend of security
and convenience. The special control
key for the system is all that is
required to remove the old core and
install the new one. The core itself
can be rekeyed with standard Schlage
pin kits.
to extremely close tolerances and the highest standards
of accuracy. Using only solid brass
bar stock plugs and shells, phosphor
bronze springs, nickel silver keys and
bottom pins, ensures long life and
ease of operation.
6-pin Everest cylinders in C123
keyway with two patented keys are
standard for stock. C145 is standard for new master
key systems.
Unlike some other brands, Schlage interchangeable cores
can always be integrated into existing systems with no
adverse affect on the key system.
IC locks are especially well suited to chain stores and
restaurants where frequent employee turnover requires
immediate rekeying by store management.
®
®
Primus High Security Cylinders
Primus Lockout Cylinders
Primus high security cylinders are available to add
patented key control and varying degrees of geographical
exclusivity to most Schlage 6-pin
key systems, whether Everest or
Classic keyways.
Available in rim and mortise cylinders only, Lockout
cylinders are designed for doors where it is frequently
desirable to disable all keys from
operating the lock temporarily.
The special lockout key can be
removed while the plug is turned to
the 11 o’clock position, preventing
all normal operating keys, including
master keys, from fully entering the
cylinder.
In addition to
a
conventional
pin tumbler mechanism, Primus
cylinders incorporate a patented
finger pin and sidebar design
providing a “dual-locking” cylinder that is virtually
pick-proof. Resistance to drilling and other physical
attack is optional by specifying 20-500 Series UL437
Listed cylinders.
Suggested applications for lockout cylinders include
laboratories, dark rooms, clean rooms, and exterior doors
to dormitories.
Schlage will not master key lockout cylinders.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
C YL I N D E R S , K E YS A N D K E Y C O N T R O L
Cylinders for Schlage Locksets
Cylinders for A-Series Knobs
Cylinders for BC100-Series (Order tailpiece and housing separately.)
Number
21-002
Description
Number
22-002
20-729
20-529
Description
6-Pin conventional cylinder (standard, non-Orbit)
6-Pin conventional cylinder (standard, Orbit design only)
Primus cylinder, non-Orbit
Conventional cylinder only
Primus cylinder only
21-002-122
20-724
Primus UL437 Listed high security cylinder only
20-724-122
20-524
Primus cylinder, Orbit design only
Available 606 and 626 finish only. Everest C123 keyway standard.
Primus UL437 Listed high security cylinder, non-Orbit
Primus UL437 Listed high security cylinder, Orbit design only
Conventional hotel function (A85) with indicator, non-Orbit
Conventional hotel function (A85) with indicator, Orbit only
20-524-122
21-003
21-003-168
Available 606 and 626 finish only. Everest C123 keyway standard.
Cylinders for AL-Series Levers
Cylinders for B250-Series (Order tailpieces separately.)
This table also applies to discontinued B100, B200 and B400-Series
deadlocks, and the top cylinders of H and S200-Series interconnected
locksets.
Number
21-020
20-728
20-528
21-021
Description
Number
22-002
20-729
20-529
22-019
20-730
20-530
22-019
20-730
20-530
Description
6-Pin conventional cylinder (standard)
Primus cylinder
6-Pin conventional cylinder only
Primus cylinder only
Primus UL437 Listed high security cylinder
Conventional hotel function (AL85) with occupancy indicator
Primus UL437 Listed high security cylinder only
6-Pin conventional cylinder in outside housing
Primus cylinder in outside housing
Available 606 and 626 finish only. Everest C123 keyway standard.
Primus UL437 Listed high security cylinder in outside housing
6-Pin conventional cylinder in inside housing
Primus cylinder in inside housing
Primus UL437 Listed high security cylinder in inside housing
Cylinder itself available 606 and 626 finish only. Housing is available in B250,
H, and S200-Series finishes.
Everest C123 keyway standard.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
C YL I N D E R S , K E YS A N D K E Y C O N T R O L
Cylinders for Schlage Locksets
B600-Series - Conventional Cylinder
B700-Series - Primus Cylinder
B800-Series - UL437 Listed Primus Cylinder
Cylinders for B600/700/800-Series Deadlocks (Housing not included)
Cylinders for D-Series Knobs
Lockset
Cylinder
Number
Door
Number
23-001
Description
Function
Thickness
Cylinder Mechanism
6-Pin conventional cylinder (standard)
Primus cylinder
”
”
B660, B663
B661, B664
B662
22-644
1³⁄₈ - 2¹⁄₂
22-642
22-643
22-645
22-646
1³⁄₈”- 2”
2”- 2¹⁄₂”
1³⁄₈” - 2”
2”- 2¹⁄₂”
20-748
Conventional
20-548
Primus UL437 Listed high security cylinder
Conventional hotel function (D85) with occupancy indicator
6-Pin conventional cylinder, 2” - 2¹⁄₂” thick door
Primus cylinder, 2” - 2¹⁄₂” thick door
23-003
”
”
B760, B763
B761, B764
B762
20-744
1³⁄₈ - 2¹⁄₂
20-742
20-743
20-745
20-746
1³⁄₈”- 2”
2”- 2¹⁄₂”
1³⁄₈” - 2”
2”- 2¹⁄₂”
21-002
Primus
20-724
20-524
Primus UL437 Listed high security cylinder, 2” - 2¹⁄₂” door
Conventional hotel function (D85) w/indicator, 2” - 2¹⁄₂” door
”
”
B860, B863
B861, B864
B862
20-544
1³⁄₈ - 2¹⁄₂
20-542
20-543
20-545
20-546
1³⁄₈”- 2”
2”- 2¹⁄₂”
1³⁄₈” - 2”
2”- 2¹⁄₂”
23-003-098
Primus UL437 Listed
Available 606 and 626 finish only. Everest C123 keyway standard.
Available 606 and 626 finish only. Everest C123 keyway standard.
Cylinders for D-Series Levers
Number
23-013
20-750
20-550
23-014
Description
6-Pin conventional cylinder (standard)
Primus cylinder
Primus UL437 Listed high security cylinder
Conventional hotel function (D85) with occupancy indicator
Available 606 and 626 finish only. Everest C123 keyway standard.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
C YL I N D E R S , K E YS A N D K E Y C O N T R O L
Cylinders for Schlage Locksets
29-002
29-003
29-005
Cylinders for F-Series Knobs and Levers
Cylinders for S-Series Levers
Number
29-002
29-003
29-005
Description
Number
21-028
20-752
20-552
Description
Bell, Georgian and Plymouth knobs
Orbit knob
Conventional cylinder
Primus cylinder
Accent and Flair levers
Primus UL437 Listed high security cylinder only
Available 429 (to match 626) and 430 (to match 606) finish.
5-pin C keyway only.
Available 606 and 626 finish.
Everest C123 keyway standard.
Cylinders for H-Series Interconnected Locksets
Cylinders for S200-Series Interconnected Locksets
Description
Cylinder
Description
Cylinder
Top cylinder (deadlock)
Bottom cylinder (knob)
See B200/400-Series deadlock cylinder table
See A-Series knob cylinder table
Top cylinder (deadlock)
Bottom cylinder (lever)
See B200/400-Series deadlock cylinder table
See S-Series lever cylinder table
6
Download from Www.Somanuals.com. All Manuals Search And Download.
C YL I N D E R S , K E YS A N D K E Y C O N T R O L
Cylinders for Schlage Locksets
Cylinder Only
Compr. Ring & Spring
Concealed Shell Cylinder
Blocking Rings*
Cylinders for Schlage L-Series Mortise Locks
Cylinder Mechanism
Primus
UL437
Lockout
Primus
UL437
Primus
Lockout
Design
Function
Conventional
Primus
All Except Below
L9060P Outside
30-021
20-793
20-593
20-717**
20-517**
L&N
Escutcheons
(cylinders and
spring only)
26-021
30-022*
30-004
26-023
30-005*
30-001
20-001
30-002*
20-701
N/A
20-501
N/A
20-715**
N/A
20-515**
N/A
L9485, L9486
Hotel Funtions
All Except Below
L9080P Outside
20-789
N/A
20-589
N/A
N/A
N/A
L Escutcheon
with concealed
shell cylinder
(C suffix)
N/A
N/A
L9485, L9486
Hotel Funtions
N/A
N/A
N/A
N/A
All Except Below
L9060P Outside
L9060P Outside
20-787
20-700
N/A
20-587
20-500
N/A
20-717
20-715
N/A
20-517
20-515
N/A
Sectional Trim
(cylinder with
compression ring
& spring)
* Specify door hand for hotel function cylinders.
** Discard compression ring for Lockout cylinders with escutcheon trim.
Notes 1. Available 605, 606, 612, 613, 625, 626, 629, and 630 finish. Concealed shell cylinders available 606 and 626 only.
2. To differentiate between Classic and Everest, specify keyway. Example: C or CP (Classic), C123 (Everest).Everest C123 keyway standard.
3. 1-1/8” length standard. Optional lengths available in 1/8” (4mm) increments up to 1-3/4” (44mm).
4. To order less Schlage logo, specify with K510-612 faceplate.
5. Lockout keys must be ordered separately and lockout cylinders will not be master keyed by Schlage.
6. Specify LKB if 0-bitted Primus cylinders are required less key blanks.
Cam for All Functions Except L9060 Outside
Cam for L9060 Outside and Most Brands of
Old Black Cast Iron Mortise Locks
L583-254
Classic Conventional
L583-153
Everest & Primus
B502-191
Classic Conventional
B502-948
Everest & Primus
7
Download from Www.Somanuals.com. All Manuals Search And Download.
C YL I N D E R S , K E YS A N D K E Y C O N T R O L
Cabinet Locks and Padlocks
CL-Series Cabinet Locks
CL1000
CL2000
Door
Drawer
Complete Lock
Cylinder Only
Application
Bolt Conventional Primus Primus UL Conventional Primus Primus UL
1” (std) CL1000PB CL1740PB CL1540PB
Door
20-172
20-772
20-774
20-572
1/2”
1/2” (std) CL2000PB CL2740PB CL2540PB
3/4”
CL1009PB CL1749PB CL1549PB
Drawer
20-174
20-574
CL2009PB CL2749PB CL2549PB
Available 606 and 626 finish.
Everest C123 keyway standard.
PL-Series Padlocks
A
B
C
Complete Padlock
Cylinder Only
Padlock
Series
Shackle Dimensions
Conventional Primus Primus UL Conventional Primus Primus UL
A
B
C
1¹⁄₈”
³⁄₄”
⁵⁄₁₆”
PL1001
PL1002
PL1003
PL2001
PL1741
PL1742
PL1743
PL2741
PL1541
PL1542
PL1543
PL2541
PL1000
2”
3”
³⁄₄”
³⁄₄”
⁵⁄₁₆”
⁵⁄₁₆”
³⁄₈”
1³⁄₄” x 2¹⁄₈” x ³⁄₄”
1¹⁄₈”
2”
³⁄₄”
47-410
47-740
47-540
PL2000
³⁄₄”
³⁄₈”
PL2002
PL2003
PL3001
PL2742
PL2743
PL3741
PL2542
PL2543
PL3541
2” x 2¹⁄₈” x ³⁄₄”
3”
³⁄₄”
³⁄₈”
1¹⁄₈”
2”
¹⁵⁄₁₆”
¹⁵⁄₁₆”
⁷⁄₁₆”
⁷⁄₁₆”
PL3000
2¹⁄₄” x 2³⁄₈” x ⁷⁄₈”
PL3002
PL3742
PL3542
Available 606 finish only.
Everest C123 keyway standard.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
C YL I N D E R S , K E YS A N D K E Y C O N T R O L
Cylinders for Exit Devices, Aluminum Doors, etc.
Rim Cylinders
Number
Description
20-022
20-710
20-716
20-510
20-516
Conventional cylinder
Primus cylinder
Primus lockout cylinder
Primus UL437 Listed cylinder
Primus UL437 Listed lockout cylinder
Available 605, 606, 612, 613, 625 and 626 finish.
Everest C123 keyway standard.
Cylinders for Adams Rite MS, 4500 and 4700 Series,
Lori 4500 Series and Corbin Russwin DL3000 Series.
Number
26-072
20-013
20-706
20-510
20-718
20-518
Description
Conventional cylinder only
Conventional cylinder with 3/8” blocking ring
Primus cylinder with 3/8” blocking ring
Primus UL437 Listed cylinder
Primus lockout cylinder
B502-944
Cam for Everest
& Primus
B502-292
Cam for Classic
Conventional
Primus UL437 Listed lockout cylinder
These cylinders include set screw pack B220-050 for Adams Rite locks.
Cylinders for Adams Rite 4070 Series
Number
26-073
20-708
20-508
Description
Conventional cylinder only
Primus cylinder only
B502-380
Cam for Classic
Conventional
B502-945
Cam for Everest
& Primus
Primus UL437 Listed cylinder only
Notes 1. Available 605, 606, 612, 613, 625, 626, 629, and 630 finish.
2. To differentiate between Classic and Everest, specify keyway. Example: C or CP (Classic), C123 (Everest).Everest C123 keyway standard.
3. 1-1/8” length standard. Optional lengths available in 1/8” (4mm) increments up to 1-3/4” (44mm).
4. To order less Schlage logo, specify with K510-612 faceplate.
5. Lockout keys must be ordered separately and lockout cylinders will not be master keyed by Schlage.
6. Specify LKB if 0-bitted Primus cylinders are required less key blanks.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
C YL I N D E R S , K E YS A N D K E Y C O N T R O L
Full Size Interchangeable Core
D-Series Lever
A-Series
ALL DESIGNS
ORBIT DESIGN
AL-Series
H-Series Knob
SATURN DESIGN
ORBIT DESIGN
BC100-Series
B250-Series
L-Series
ALL DESIGNS
S-Series
B600 / 700-Series
ALL DESIGNS
EXCEPT FLAIR
D-Series Knob
S200-Series
ORBIT DESIGN
ALL DESIGNS FOR S210.
ALL EXCEPT FLAIR FOR
OTHER FUNCTIONS
10
Download from Www.Somanuals.com. All Manuals Search And Download.
C YL I N D E R S , K E YS A N D K E Y C O N T R O L
Full Size Interchangeable Core Cylinders for Schlage Locksets
Full Size Core Only
Number
23-030
30-120
20-730
Mechanism
Conventional core
Conventional core for hotel function (specify hand)
Primus core (not available in hotel function)
Available 606 and 626 finish only. Everest C123 keyway standard.
Order control keys separately.
10-32 Bolts
B200
H, S200
1/4-28 Bolts, Straight Driver
1/4-28 Bolts, Angled Driver
BC100
B600
IC Housings for Bored Deadlocks, Less Core
Lockset
Series
Description
Number
Specify Finish
Outside
Inside
Outside
B220-203
B220-204
22-061
605, 609, 612, 613, 625, 626
See Note Below
BC100-Series
B250, H, S200-Series
605, 606, 609, 610, 611, 612, 613, 616, 625, 626
Inside of B252 22-062
Outside
Inside
B610-027
B610-028
605, 606, 609, 612, 613, 625, 626
See Note Below
B600 / 700-Series
Specify finish of B610-031 inside snap-on faceplate ordered separately for BC162 and B662/762.
A
Interchangeable Core Padlocks
R
D
H
Padlock
Series
Padlock with Core
Conventional Primus
Shackle Dimensions
A
B
C
B
PL4001
PL4002
PL4003
PL4741
PL4742
PL4743
³⁄₄”
C
1¹⁄₈”
³⁄₈”
PL4000
³⁄₄”
2”
³⁄₈”
2” x 2¹⁄₄” x ⁷⁄₈”
³⁄₄”
3”
³⁄₈”
11
Download from Www.Somanuals.com. All Manuals Search And Download.
C YL I N D E R S , K E YS A N D K E Y C O N T R O L
Full Size Interchangeable Core Mortise Cylinders
1-1/2”
Cylinders for Schlage L-Series Mortise Locks
Core Mechanism
Housing
Less Core
Design
Function
Conventional
Primus
All Except Below
30-008
20-798
30-007
L583-255
L&N
Escutcheons
(cylinders with
compression ring)
Cam for All Functions
Except L9060 Outside
L9060P Outside
30-030
30-010*
30-138
20-061
30-140*
20-782
N/A
30-032 + 36-083
30-007
L9485P, L9486P
Hotel Funtions
All Except Below
L9060P Outside
20-776
20-783
N/A
30-137
Sectional Trim
(cylinder with
compression ring,
spring and
30-032 + 36-083 +
35-082-037
3/8˝ blocking ring)
K510-680
Cam for
L9060 Outside
L9485P, L9486P
Hotel Funtions
30-137
* Hotel function cores are handed. Specify hand of door.
Mortise Cylinders with Straight Cam for Exit Devices and
Most Old Black Cast Iron Mortise Locksets
Number
26-091
20-061
20-763
20-771
20-059
26-064
26-094
Core Mechanism
Collar
Compression ring & spring
3/16” + 3/8” blocking rings
Compression ring & spring
3/16” + 3/8” blocking rings
None
Conventional core
Primus core
K510-730
Straight Cam,
Other Applications
Housing less core
Compression ring & spring
3/16” + 3/8” blocking rings
Notes 1. Available 605, 606, 612, 613, 625, and 626 finish. Cores furnished 606 and 626 only.
2. To differentiate between Classic and Everest, specify keyway. Example: C or CP (Classic), C123 (Everest). Everest C123 keyway standard.
3. All cylinders are 1-1/2” long.
4. Specify LKB if 0-bitted Primus cylinders are required less key blanks.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
C YL I N D E R S , K E YS A N D K E Y C O N T R O L
Full Size Interchangeable Core Cylinders for Exit Devices, Aluminum Doors, etc.
Interchangeable Core Rim Cylinders for Exit Devices
Number
20-057
20-757
20-079
Core Mechanism
Conventional core
Primus core
Housing only, less core
Available 605, 606, 612, 613, 625 and 626 finish.
Everest C123 keyway standard.
Cylinders for Adams Rite MS and 4700 Series,
Lori 4500 Series and Corbin Russwin DL3000 Series.
Number
26-098
20-062
20-766
20-060
Core Mechanism
Conventional core
Conventional core
Primus core
Collar
Compression ring & spring
3/16” + 3/8” blocking rings
3/16” + 3/8” blocking rings
None
K510-711
Adams Rite
MS Cam
Housing less core
These cylinders include set screw pack B220-050 for Adams Rite locks.
Cylinders for Adams Rite 4070 Series Deadlocks
Number
20-091
20-722
20-090
Core Mechanism
Conventional core
Primus core
Collar
3/16” + 3/8” blocking rings
3/16” + 3/8” blocking rings
None
B520-378
Adams Rite
4070 Cam
Housing less core
Notes 1. Available 605, 606, 612, 613, 625, and 626 finish. Cores furnished 606 and 626 only.
2. To differentiate between Classic and Everest, specify keyway. Example: C or CP (Classic), C123 (Everest). Everest C123 keyway standard.
3. All cylinders are 1-1/2” long.
4. Specify LKB if 0-bitted Primus cylinders are required less key blanks.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
C YL I N D E R S , K E YS A N D K E Y C O N T R O L
Small Format (Best Style) Interchangeable Core
AL-Series
D-Series Lever
SATURN DESIGN
ALL DESIGNS
BC100-Series
B250-Series
L400-Series
B600 / 700-Series
L9000-Series
ALL DESIGNS
14
Download from Www.Somanuals.com. All Manuals Search And Download.
C YL I N D E R S , K E YS A N D K E Y C O N T R O L
Small Format Interchangeable Core Cylinders for Schlage Locksets
Small Format Core Only
Number
80-036
80-037
80-043
80-033
Mechanism
7-pin Everest B Family restricted keyway core, uncombinated
7-pin Everest B Family restricted keyway core, uncombinated
6-pin Best keyway core, uncombinated
7-pin Best keyway core, uncombinated
Notes 1. Available 606 and 626 finish only.
2. Suffix keyway, e.g. 80-036 B235, 80-043 AB, etc.
3. Proper authorization required for Everest cores. Order control keys separately.
4. 80-043 and 80-033 available in Best A, D, E, F, G, H, J, K, L and M keyways. Suffix “B” to keyway letter, e.g. AB, DB, etc.
1/4-28 Bolts
IC Housings for Bored Deadlocks, Less Core
Lockset
Series
Description
Number
Specify Finish
Outside
Inside
Outside
Inside
B610-282
B610-281
B610-027
B610-028
605, 609, 612, 613, 625, 626
See Note Below
605, 606, 609, 612, 613, 625, 626
See Note Below
BC100-Series
B600-Series
Tailpieces not included.
Specify finish of B610-014 snap-on faceplate ordered separately for inside of BC162 and B662.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
C YL I N D E R S , K E YS A N D K E Y C O N T R O L
Small Format Interchangeable Core Mortise Cylinders
Cylinder Only
Compr. Ring & Spring
With Blocking Ring
Cylinders for Schlage L-Series Mortise Locks
Cylinder Mechanism
Keyed Disposable
Everest
Restricted
(GD Suffix)
Housing
Less Core
(BD Suffix)
Construction Construction
Design
Function
(HD Suffix)
(BDC Suffix)
L583-255
Cam for All Functions
Except L9060 Outside
All* except
L9060 Outside
L&N
80-308
80-138
80-115
80-108
80-104
Escutcheons
(cylinders with
compression ring
and spring)
L9060 Outside
80-304
80-134
80-112
All* except
L9060 Outside
Sectional Trim
(Culinder with
80-301
80-131
80-109
80-101
compression ring,
spring, and 1/4˝
blocking ring)
80-304 +
36-082-025
80-134
36-082-025
80-112
36-082-025
80-104
36-082-025
K510-680
Cam for
L9060 Outside
L9060 Outside
Mortise Cylinders with Straight Cam for Exit Devices and Most Old Black Cast Iron Mortise Locksets
Number
80-302
80-110
80-132
80-102
Core Type
Everest restricted core
Disposable constr. core
Keyed constr. core
Housing less core
K510-730
Straight Cam,
Other Applications
Furnished with compression ring, spring and 1/4” blocking ring
Notes 1. Available 605, 606, 612, 613, 625, and 626 finish. Cores furnished 606 and 626 only.
2. All cylinders are 1-3/8” long.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
C YL I N D E R S , K E YS A N D K E Y C O N T R O L
Small Format Interchangeable Core Cylinders for Exit Devices, Aluminum Doors, etc.
Interchangeable Core Rim Cylinders for Exit Devices
Number
20-057
20-757
20-079
Core Mechanism
Conventional core
Primus core
Housing only, less core
Available 605, 606, 612, 613, 625 and 626 finish.
Everest C123 keyway standard.
Cylinders for Adams Rite MS and 4700 Series,
Lori 4500 Series and Corbin Russwin DL3000 Series.
Number
80-303
80-111
80-133
80-103
Core Type
Everest restricted core
Disposable constr. core
Keyed constr. core
Housing less core
K510-711
Adams Rite
MS Cam
Furnished with compression ring, spring and 7/16” blocking ring.
These cylinders include set screw pack B220-050 for Adams Rite locks.
Cylinders for Adams Rite 4070 Series Deadlocks
Number
80-305
80-113
80-135
80-105
Core Type
Everest restricted core
Disposable constr. core
Keyed constr. core
Housing less core
B520-378
Adams Rite
4070 Cam
Furnished with compression ring, spring and 1/4” blocking ring
Notes 1. Available 605, 606, 612, 613, 625, and 626 finish. Cores furnished 606 and 626 only.
2. All cylinders are 1-3/8” long.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
C YL I N D E R S , K E YS A N D K E Y C O N T R O L
Cams for Schlage Mortise Cylinders in Other Manufacturers’ Mortise Locks
Classic Conventional
Interchangeable Core
Everest & Primus Non-IC
20-061, 20-771, 26-094,
80-102, 80-110, 80-132, 80-302
20-001 Everest
20-500 and 20-700 Primus
20-001
Corbin Russwin®
DL4000 Series
(Old Corbin 420
and
B520-295
B520-366
B520-309
B520-367
B520-254
B520-253
B520-360
X
Y
Russwin 1503)
Dim.
X = .155
Y = .775
Corbin Russwin®
ML2200 Series
(Old Corbin 7000-9000
and
Russwin 4000-5000)
All functions except
ML2255 and
ML2242 inside
(see straight cam)
B520-233
X
Y
Dim.
X = .232
Y = .729
Corbin RusswinA65
ML2200 master ring
deadbolt functions
manufactured before
6/10/93
B520-223
X
Y
and
old Russwin cast iron
residential locks
Dim.
X = .235
Y = .729
Yale®
2160
B520-329
B520-296
B520-256
Arrow ®
#004
X
Y
Sargent®
13-0660
All functions
except 16 inside
and 50 outside
Dim.
X = .186
Y = .718
The following complete cylinders are available. Specify the desired cam from the correct column above:
Cylinder Mechanism
Collar
How to Order
Conventional cylinder
Primus cylinder
compression ring and spring
compression ring and spring
compression ring and spring
compression ring, spring, 3/8” blocking ring
compression ring, spring, 3/8” blocking ring
compression ring, spring, 3/8” blocking ring
compression ring, spring, 1/4” blocking ring
compression ring, spring, 1/4” blocking ring
20-001 x cam number
20-700 x cam number
20-500 x cam number
20-061 x cam number
20-771 x cam number
26-094 x cam number
80-302 x cam number
80-132 x cam number
80-110 x cam number
80-102 x cam number
Primus UL437 Listed cylinder
Full size IC with conventional core
Full size IC with Primus core
Full size IC housing less core
SFIC with Everest core
SFIC with keyed construction core
SFIC with disposable construction core compression ring, spring, 1/4” blocking ring
SFIC housing less core compression ring, spring, 1/4” blocking ring
Other manufacturers’ registered trade names are for identification and reference only.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
C YL I N D E R S , K E YS A N D K E Y C O N T R O L
Cylinders for Other Manufacturers’ Products
Corbin Russwin CL3400, CL3600 Series
Corbin Russwin CK4200, UT5200 Series
Sargent 7, 8, 10, 65 Line Levers
Sargent 7, 8 Line Knobs
Sargent 6 Line (Except B Knobs)
Yale 5300LN, 5400LN, 6400LN Levers
Yale 5300, 5400, 6200 Knobs
Conventional
Cylinder
Primus
UL437
Description
Primus
24-139
24-127
20-739
20-539
20-527
Corbin Russwin CL3400, CL3600
Corbin Russwin CK4200, UT5200
20-727
20-726
20-720
20-719
20-723
20-747
24-126
24-120
24-119
24-123
24-147
20-526
20-520
20-519
20-523
20-547
Sargent 6 Line (Except B Knobs)
Sargent 7, 8, 9 Line Knobs
Sargent 7, 8, 10, 65 Line Levers
Yale 5300, 5400, 6200 Knobs
Yale 5300LN, 5400LN, 6400LN Levers
Other manufacturers’ registered trade names are for identification and reference only.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
C YL I N D E R S , K E YS A N D K E Y C O N T R O L
Everest Full Size Key Blanks
Numbers shown are for key blanks. For cut keys, change “35” prefix to “48” for change keys and “49” for master keys.
Suffix key section, e.g. 35-009 C123. See facing page for available key sections.
Conventional
DO NOT DUPLICATE
PAT. 5,715,717
DO NOT DUPLICATE
PAT. 5,715,717
DO NOT DUPLICATE
PAT. 5,715,717
PAT. 5,715,717
Standard Front
for C Family
35-009
Standard for
Control Keys
Plain Both Sides
35-015
and all D Family keys.
Optional for C Family
35-002 Operating
35-003 Control
6-Pin
Control
Everest conventional keys are available with and
without DO NOT DUPLICATE. Specify plain bow
keys for applications when keys must be stamped
with additional information such as special die
stamps, serial numbering, etc.
CONTROL
Back of
Back of
35-003
35-002
&
35-009
Portion of lip removed
from conventional
Everest keys to prevent
usage in Primus cylinders
ID
Primus
Number
PRIMUS
001426
DO NOT DUUPLICATE
Pat. 5,8809,816
DO NOT DUPPLICATE
Pat. 5,8809,816
Back of
35-004
Standard Front
35-004 Operating
35-005 Control
Plain Both Sides
35-013
To order, specify quantity, 6-digit ID number, and key section.
Key blanks are packed 50 per box, 1000 per case.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
C YL I N D E R S , K E YS A N D K E Y C O N T R O L
Everest Keyways for New Key Systems
C Family Keyways
for Everest conventional cylinders and
Primus Levels 7, 8, and 9
All-Section Key
C000
Multi-Section Keys
C100
C200
Multi-Section Keys
Multi-Section Keys
C150
C120
C230
C134
C145
C135
C125
C124
C123
C234
C235
C245
C345
New master key systems begin here
Stock keyway for
and expand to the right.
commercial sales.
By definition, all Primus keys are restricted. Primus keys are downward compatible to operate Schlage conventional
cylinders with compatible keyways. Key blanks for Schlage Everest conventional cylinders with C Family keyways
(above) are openly available to locksmiths and contract hardware dealers but not normally found in retail stores that
duplicate keys.
D Family Restricted Keyways (not shown)
D Family keyways are end user restricted keyways. They are not stocked by locksmtihs or other dealers. Conventional
(non-Primus) cylinders with D Family restricted keyways offer economical patent protection but no geographical exclusivity.
All orders for D Family keys and blanks require a letter of authorization from the end user.
The D Family keyways are only available at Primus Level 9 where product is shipped directly to the end user or his
designated agent. Primus cylinders add the geographical exclusivity of the side bitting as well as the high security features
of the finger pin and sidebar mechanism.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
C YL I N D E R S , K E YS A N D K E Y C O N T R O L
Classic Key Blanks
Numbers shown are for key blanks. For cut keys, change “35” prefix to “48” for change keys and “49” for master keys.
Suffix key section, e.g. 35-101 E. See facing page for available key sections.
Conventional
Standard
Front and Back
35-100 5-Pin
35-101 6-Pin
35-056 Control
Plain Both Sides
35-130 5-Pin
35-131 6-Pin
35-076 Control
Primus
5-Pin
6-Pin
Control
PRIMUS
DO NOT DUPLICA
TE
PAT
. NO. 4,756,177
Standard Bow
To order conventional key blanks with
DO NOT DUPLICATE, specify XQ06-878.
Back
of Both
Standard Front
35-157 Operating
35-158 Control
Plain Front
35-053 Operating
35-052 Control
Specify plain bow keys for applications
when keys must be stamped with addi-
tional information such as special die
stamps, serial numbering, etc.
Access Bow
Conforms to California Title 24 for handicap access.
Large Bow
Ideal for special keys which
must be visibly distinctive
within a key system, or
forvery specialized marking.
Conventional Back
Primus Back
Conventional Back
PRIMUS
Large Bow
Access Bow
DO NOT DUPLICATE
PAT . NO. 4,756,177
35-140 5-Pin
35-141 6-Pin
35-116 Primus
35-143 5-Pin
35-144 6-Pin
35-115 Primus
Primus Back
22
Download from Www.Somanuals.com. All Manuals Search And Download.
C YL I N D E R S , K E YS A N D K E Y C O N T R O L
Classic Keyways for Older Key Systems
Obverse Keyways
for Classic Conventional cylinders
All-Section Key
L
Multi-Section
Keys
H
J
K
C
CE
E
EF
F
FG
G
Keyways and
Single Section Keys
Keyway
to accept
all key sections
P
Stainless Steel
All-Section Key
Cut at Factory Only
Obverse Keyways
for Classic Primus cylinders
Levels 1 through 4
LP
Multi-section keys and
the all-section key are
only avialable at Primus
Level 2 and above.
Multi-Section Keys
HP
JP
CP
CEP
EP
EFP
FP
FGP
Restricted Keyways (not shown)
By definition, all Primus keys are restricted. They are downward compatible to operate Schlage conventional cylinders
with corresponding keyways. Schlage Classic conventional cylinders may have keyways which are openly available as
shown above, or they may be restricted (without patent protection) and require a letter of authorization from the end user.
Not all Classic restricted keyways are Primus compatible.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
C YL I N D E R S , K E YS A N D K E Y C O N T R O L
Small Format Key Blanks
For cut keys, change “35” prefix to “48” for change keys and “49” for master keys.
Suffix key section, e.g. 35-009 C123. See facing page for available key sections.
ID
Number
Everest B Family
Patented
Restricted
Key Blanks
35-401
Standard
Front and Back
Plain Both Sides
35-021
B235 Dealer Keyway
Available to locksmiths and service-oriented contract hardware dealers, this keyway is controlled similar to Primus Levels 1+ and 7.
Each dealer signs a contract agreeing to certain key control procedures and agreeing not to duplicate keys marked with
another dealer’s ID number.
The dealer cuts all B235 keys and cannot sell key blanks to the end user. If the end user needs to cut keys, B Family end user
keyways (below) should be furnished instead of B235. Contact your Schlage commercial wholesaler or local IR Security & Safety
Consolutants office for further information.
B Family End User Keyways
The B Family end user restricted keyways are not stocked by locksmtihs or other dealers. They are drop shipped directly to the
end user and offer economical patent protection but no geographical exclusivity. All orders for B Family keys and blanks require a
letter of authorization from the end user.
®
Best Type
Key Blanks
DUPLICATION
PROHIBITED
J
35-310
Front & Back
A
D
E
F
G
H
J
K
L
M
Not available
as cut keys.
Available in the ten most popular Best key sections.
Suffix key section plus “B” to number when ordering,
e.g. 35-310 AB.
To order, specify quantity and key section. Include 6-digit ID number for Everest B Family.
Key blanks are packed 50 per box, 1000 per case.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
C YL I N D E R S , K E YS A N D K E Y C O N T R O L
Cylinder Service Equipment and Tools
40-119
B
40-070
L
U
E
P
U
P
RO-LOKS
R
O
F
E
N
C
H
P
T
S
P
R
IO
O
-L
Q
#
B
P
2
O
K
U
A
O
R
T
O
A
N
G
A
L
O
L
0
1
S
L
I
E
,
&
C
A
A
C
Y
9
C
2
6
E
T
O
6
7
S
S
O
L
S
O
R
IE
S
9
8
P
7
R
6
5
O
4
-LO
3
2
1
0
K
40-075
Blue Punch Key Machine
40-074
Pin Kits
40-119 For full size conventional cylinders
Contains bottom, top and master pins, springs,
cap pins, cap pin springs, caps, follower,
tweezers, key gauge, shims, cap removal tool
40-075 Classic Obverse and Everest C Family keys only
(Conventional and Primus)
40-071 Everest B Family small format IC keys only
40-074 Upgrade jaw kit adds Everest C Family capability to
Blue Punch machines made before July 1999
40-070 Primus
Contains finger pins, sidebars, springs, plug holder
40-129 SFIC wooden pin kit for A2 System
Contains all pins and springs, key gauge, tweezers,
capping tool, capping block, ejector tool
®
Key Gauge
40-104 Full size keys
40-128 A2 System SFIC keys
40-066
Full Size Cylinder Tools (included in kits above)
40-066
40-116
Primus plug holder
Shell loading tool
M204-200 Pin tweezers
M540-056 Cylinder cap removal tool
40-137
40-138
40-136
Small Format IC Tools (included in 40-129 kit)
40-137 Capping block
40-136 Ejector tool
40-138 Capping tool
25
Download from Www.Somanuals.com. All Manuals Search And Download.
C YL I N D E R S , K E YS A N D K E Y C O N T R O L
Bulk Pack Cylinder Kit
Bulk Packs are 10-packs that contain the components you need to
quickly build 10 cylinders. All shells are pre-loaded with top pins
and springs.
Classic
Everest
Description
Conventional Conventional Primus
09-409
09-412
09-751
09-754
09-764
09-767
Key-in-knob / lever
Mortise (specify length)
09-410
09-411
09-752
09-753
09-765
20-766
Rim
Full size interchangeable core
Specify keyway and finish.
Keys and tailpieces/cams must be ordered separately.
Multiple Tailpiece Cylinders
Reduce cylinder inventory by stocking these cylinders packed
with tailpieces to fit these locks:
• A-Series (all designs)
• AL-Series
• D-Series knobs
• D-Series levers
• H-Series knobs (all designs)
Multiple Tailpiece Cylinders
40-100 Conventional
40-700 Primus
40-500 Primus UL
Notes 1. Available 606 or 626 finish.
2. Specify keyway to distinguish between Everest and Classic. Example: C or CP (Classic) vs. C123 (Everest). Available in all full size keyways.
3. Cylinders are only available 0-bitted.
4. Not available for hotel function cylinders with occupancy indicator.
5. Primus key blanks must be ordered separately.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
C YL I N D E R S , K E YS A N D K E Y C O N T R O L
Primus I.D. Cards
Primus Authorization Forms
Primus I.D. cards are used as authorization credentials for Primus
Level 1, 1+, 2, and 8 keys. Cards have a signature panel on the
back and are issued by the servicing locksmith or dealer who
directly supports the system owner. The owner must present the
I.D. card to obtain duplicate keys or additions to his system. The
signature will be validated by the dealer.
Number
Description
MS-E110
Primus Restricted Key Order Form
This form is a three-part imprintable
form used to record and track the
issuance of Primus keys.
Primus Cards
Level
Classic Primus Level 1 I.D. Card
MS-E120
MS-E130
MS-E160
Primus Face Sheet Form
Number
40-061
40-065
40-062
40-060
®
This form must accompany all Level 3,
4 and 9 orders and provides the factory
with a customer authorized signature
which is compared to the signature on
file, a Primus reference number (for
additions to an existing Primus system)
and shipping instructions for that order.
1
1 Plus
2
Everest Primus I.D. Card
7 & 8
LEVEL
7
Primus Signature Card Form
This form is used as a permanent
record against which the signature of
individuals authorized to obtain service
and support for their Primus System is
validated. This form must accompany
all new Level 3, 4 and 9 factory orders.
123456
THE SAMPLE BUILDERS CO.
123456
000001
Primus & Everest Sales Aids
Primus I.D. Card Control Register
This form is used by locksmiths and
dealers to account for the issuance
of Primus I.D. Cards.
Contact Schlage Commercial Customer Service to order these
Cylinder Demo Kits (Cutaway cylinders included)
40-077 Everest conventional, Primus and SFIC demo kit
40-146 Classic conventional and Primus demo kit
Cutaway Cylinders
40-073 Everest conventional
40-093 Everest Primus
40-072 Classic Primus
Primus Dealer Advertising
40-141 Primus bumper sticker
40-142 Primus baseball cap
40-143 Primus dealer window decal
40-144 Primus dealer uniform patch
27
Download from Www.Somanuals.com. All Manuals Search And Download.
C YL I N D E R S , K E YS A N D K E Y C O N T R O L
Security Levels
The Primus system features multiple levels of security. Primus systems with Classic keyways (Levels 1 through 4) are ideal for upgrading
older key systems. All new systems should be specified with Everest keyways (Levels 7 - 9) for maximum patent life, durability, and master
keying capacity. Each level requires an appropriate I.D card and/or signature verification for key duplication. All levels utilize patent
protected Primus cylinders and keys to protect against unauthorized duplication. To select the proper level of security, consideration should
be given to the overall key control, convenience and service required for the installation.
Everest Primus does not have an equivalent level to the Classic
Level One. Users seeking restricted key systems should consider
an Everest Restricted key system. Everest Restricted key systems
provide key control via a factory verified letter of authorization
containing a shipping address for all keys and key blanks.
Level One
One standard side bitting is allocated for Level One systems. Level
One locksmiths are permitted to stock Level One Primus cylinders
and keys on a local basis. The end user is assigned an I.D. card
by the locksmith which must be presented to obtain additional keys.
Level Seven - Wholesaler/Locksmith
Level One Plus
Similar to Level One Plus, Level Seven offers key blanks with
side bittings that are distributed on a limited basis. Level Seven
key blanks are sold to a wholesaler on a nationwide exclusive
basis. These blanks are distributed through select locksmiths who
are assigned unique ID numbers. Level One Plus locksmiths are
only able to stock and duplicate keys with their own I.D. number
on them. End users are issued an I.D. card which must be
presented to the originating locksmith to obtain additional keys.
Primus Level One Plus combines the convenience of locally stocked
keys and cylinders with the security of multiple side bittings
distributed on a limited basis. Level One Plus key blanks are sold
to a wholesaler on a nationwide exclusive basis. These blanks are
distributed through select locksmiths who are assigned unique
ID numbers. Level One Plus locksmiths are only able to stock and
duplicate keys with their own I.D. number on them. End users
are issued an I.D. card which must be presented to the originating
locksmith to obtain additional keys.
Level Eight - Servicing Dealer
Level Eight systems combine the durability and long patent life
of Everest C Family keyways with the security controls of
Classic Primus Level Two. Level Eight offers any servicing
dealer approved by Schlage a time zone exclusive side bitting.
The dealer cuts all keys and performs all keying services after
validating the customer signature on the I.D. card.
Level Two
Level Two systems provide local service and inventory of Primus
products, but on a more restricted basis. Level Two offers the end
user a special side bitting which is exclusive to a contract hardware
dealer within his time zone. The Primus Level Two dealer cuts all
keys and performs all keying services after validating the Primus
I.D. card and verifying the customer signature.
Level Nine - End User
Level Nine combines the end user features of Classic Primus
Level Three and Level Four. For Level Nine systems with fewer
than 60 cylinders, Schlage assigns the side bittings randomly
from a small pool of factory controlled combinations. Systems
over 60 cylinders are assigned exclusive side bittings based on
the first two digits of the zip code. For very large systems, time
zone or nationwide exclusive side bitting exclusivity is also
available based on the end userÕs purchase commitment. Authorized
signatures are verified by the Schlage factory with each order
for key blanks, duplicate keys or additions to a factory master
keyed system.
Level Three
At Level Three the Schlage factory maintains control of the
Primus key system. For systems with fewer than 60 cylinders,
Schlage assigns the side bitting from a small pool of combinations
that may be repeated locally. For systems over 60 cylinders,
the side bitting is assigned to each installation based on the first
two digits of the zip code. Authorized signatures are verified by
the Schlage factory with each order for key blanks, duplicate keys
or additions to a factory master keyed system.
Level Four
As with Level Three, the factory maintains control of Primus
Level Four systems. Side bittings are assigned on either a time
zone or nationwide basis, depending on the end userÕs purchase
commitment. Authorized signatures are verified by the Schlage
factory with each order for key blanks, duplicate keys or additions
to a factory master keyed system.
LEVEL
®
7
123456
THE SAMPLE BUILDERS CO.
123456
000001
28
Download from Www.Somanuals.com. All Manuals Search And Download.
C YL I N D E R S , K E YS A N D K E Y C O N T R O L
Schlage Cylinder Terminology
Over the last few years Schlage has introduced a varietyof new keyways
and cylinder types. This chart illustrates our cylinder terms and how they are
related. The definitions below provide additional information.
Keyway Type
Patented
Undercut
CLASSIC
Keyways
Groove
Keyways
Cylinder Category
Mechanism Key Control
Adds Patented
7
7
Full Size Cylinders
and Cores
1
Everest
Primus
Classic
Primus
,
6
5
7
,
4
.
O
Restricted
N
.
T
A
P
High Security &
Geographical
Exclusivity
Duplication
Even to
Levels 1 - 4
Open Keyways
Levels 7 - 9
Classic
Conventional
Everest
Conventional
Open and
Restricted
Keyways
Conventional
(Non-Primus)
Everest
Conventional
Best®
Compatible
Open and
Restricted
Keyways
Small Format
(Best Style)
Conventional
(Non-Primus)
Interchangeable Core
Keyways
Everest
Classic
Opposing
Terms
Cylinders and keys which incorporate all new
keyways with the patented undercut groove on the
right side of the key section. C Family is the name
of the open family of keyways. B Family (for SFIC) and
D Family keyways are restricted.
Schlage pin tumbler keyways which existed before
Everest keyways. Obverse is the name of the open
family of keyways (C, E, etc.) and there are three
other families of restricted keyways: Reverse, Numbered
and Quad.
Cylinder Mechanisms
Primus Cylinders
Conventional Cylinders
Normal, standard cylinders.
Opposing
Terms
SchlageÕs high security sidebar cylinder mechanism.
Patented key control, geographical exclusivity, and
pick resistance are standard. UL437 drill resistance
isoptional. Primus keys operate conventional
cylinders.
Key Control
Restricted Keyways
Special non-stock keyways set aside for limited use
and a higher degree of key control. A letter of
authorization from the end user is required to
process orders for keys, blanks and cylinders.
Open Keyways
Opposing
Terms
Standard keyways available without any ordering
formalities. C Family (Everest Conventional) and
Obverse (Classic Conventional) keyways are open.
All others are restricted.
Cylinder Category
Small Format Interchangeable Core (SFIC)
Full Size
Opposing
Terms
A core completely interchangeable with Best, Falcon,
etc. No Primus version exists. Pins, springs, keys and
keyways are based on a plug diameter smaller than the
Pertaining to cylinders (including interchangeable cores),
keys and keyways based on the industrystandard plug
diameter of about 1/2ý.
standard 1/2
ý.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrative Offices
1915 Jamboree Drive, Suite 165
Colorado Springs, CO 80920
(719) 264-5300
FAX (719) 264-5382
Commercial Customer Service
1915 Jamboree Drive, Suite 165
Colorado Springs, CO 80920
(800) 847-1864
FAX (800) 452-0663
Order Entry
FAX (800) 452-0665
International Division
Ingersoll-Rand Architectural Hardware
1076 Lakeshore Road East
Mississauga, Ontario, L5E 1E4, Canada
(905) 278-6128
FAX (905) 278-1413
Internet
Fax-On-Demand
(888) 321-3228
IR Security & Safety Americas
111 Congressional Boulevard
STE 200
Carmel, IN 46032
800-847-1864
800-452-0663 Fax
© 2002 Ingersoll-Rand MS-M/P1 Rev. 10/02 Printed in USA
Download from Www.Somanuals.com. All Manuals Search And Download.
|