Sanyo Projector PLC XE32MODEL User Guide

Multimedia Projector  
MODEL  
PLC-XE32  
Owner's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CORRECTION NOTICE  
The following is a correction to the owner's manual on page 16.  
Audio connection for S-Video  
INCORRECT Mini Jack (stereo)  
CORRECT RCA Type L/R  
AVIS DE CORRECTION  
Voici une correction apportée au mode d'emploi à la page 16.  
Connecteur d’entrée S-vidéo audio INCORRECT Mini connecteur (stéréo)  
CORRECT  
Type RCA L/R  
NOTA DE CORRECCIÓN  
La siguiente es una corrección al manual de instrucciones en la página 16.  
Tomas de entrada S-vídeo de audio INCORRECTO Minitoma (estéreo)  
CORRECTO  
Tipo RCA L/R  
KORREKTURHINWEIS  
Im Folgenden finden Sie eine Korrektur zur Bedienungsanleitung auf Seite 16.  
Audio S-Videoeingangsbuchsen  
FALSCH  
KORREKT  
Minibuchse (stereo)  
RCA L/R  
COMUNICATO DI RETTIFICA  
Segue una rettifica al manuale dell’utente a pagina 16.  
Prese di ingresso S-video audio  
ERRATO  
CORRETTO  
Miniprese (stereo)  
Tipo RCA L/R  
Connecting to S-Video Equipment  
S-Video Output  
S-VIDEO  
AUDIO IN L/R  
1LG6P3P0012-- (LE7AC)  
Printed in China  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Trademarks  
Each name of corporations or products in this book is either a registered trademark or a trademark of its  
respective corporation.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
To the Owner  
Safety Precaution  
Before operating this projector, read this manual  
thoroughly and operate the projector properly.  
This projector provides many convenient features and  
functions. Operating the projector properly enables  
you to manage those features and maintains it in  
better condition for a considerable time.  
Improper operation may result in not only shortening  
the product-life, but also malfunctions, fire hazard, or  
other accidents.  
WARNING: TO REDUCE THE RISK OF FIRE OR  
ELECTRIC SHOCK, DO NOT EXPOSE THIS  
APPLIANCE TO RAIN OR MOISTURE.  
– This projector produces intense light from the  
projection lens. Do not stare directly into the  
lens,otherwise eye damage could result. Be  
especially careful that children do not stare directly  
into the beam.  
If your projector seems to operate improperly,  
read this manual again, check operations and  
cable connections and try the solutions in the  
"Troubleshooting" section on pages 56-57 of this  
manual. If the problem still persists, contact the  
dealer where you purchased the projector or the  
service center.  
– Install the projector in a proper position. If not, it  
may result in a fire hazard.  
– Allowing the proper amount of space on the  
top, sides, and rear of the projector is critical for  
proper air circulation and cooling of the unit. The  
dimensions shown here indicate the minimum  
space required. If the projector is to be built into a  
compartment or similarly enclosed, these minimum  
distances must be maintained.  
– Do not cover the ventilation slot on the projector.  
Heat build-up can reduce the service life of your  
projector, and can also be dangerous.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
SIDE and TOP  
REAR  
CAUTION:  
TO REDUCE THE RISK OF ELECTRIC  
SHOCK, DO NOT REMOVE COVER (OR  
BACK). NO USER-SERVICEABLE PARTS  
INSIDE EXCEPT LAMP REPLACEMENT.  
REFER SERVICING TO QUALIFIED  
SERVICE PERSONNEL.  
– If the projector is not to be used for an extended  
time, unplug the projector from the power outlet.  
THIS SYMBOL INDICATES THAT DANGEROUS  
VOLTAGE CONSTITUTING A RISK OF ELECTRIC  
SHOCK IS PRESENT WITHIN THIS UNIT.  
THIS SYMBOL INDICATES THAT THERE ARE  
IMPORTANT OPERATING AND MAINTENANCE  
INSTRUCTIONS IN THE OWNER'S MANUAL WITH  
THIS UNIT.  
CAUTION  
DO NOT SET THE PROjECTOR IN GREASY,  
WET, OR SMOKY CONDITIONS SUCH AS IN A  
KITCHEN TO PREVENT A BREAKDOWN OR A  
DISASTER. IF THE PROjECTOR COMES IN  
CONTACT WITH OIL OR CHEMICALS, IT MAY  
BECOME DETERIORATED.  
NOTE: This symbol and recycle system are applied to EU  
countries only and not applied to the countries in the  
other area of the world.  
Your SANYO product is designed  
and manufactured with high quality  
materials and components which  
can be recycled and reused.  
CAUTION  
Not for use in a computer room as defined in the  
Standard for the Protection of Electronic Computer/  
Data Processing Equipment, ANSI/NFPA 75.  
This symbol means that electrical  
and electronic equipment, at their  
end-of-life, should be disposed of  
separately from your household  
waste.  
Ne peut être utilisé dans une salle d’ordinateurs telle  
que définie dans la norme ANSI/NFPA 75 Standard  
for Protection of Electronic Computer/Data Processing  
Equipment.  
Please dispose of this equipment at your local  
community waste collection/recycling centre. In  
the European Union there are separate collection  
systems for used electrical and electronic products.  
READ AND KEEP THIS OWNER'S MANUAL FOR LATER  
USE.  
Please help us to conserve the environment we live  
in!  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Safety Instructions  
All the safety and operating instructions should be read  
before the product is operated.  
Do not install the projector near the ventilation duct of  
air-conditioning equipment.  
Read all of the instructions given here and retain them  
for later use. Unplug this projector from AC power  
supply before cleaning. Do not use liquid or aerosol  
cleaners. Use a damp cloth for cleaning.  
This projector should be operated only from the type  
of power source indicated on the marking label. If you  
are not sure of the type of power supplied, consult your  
authorized dealer or local power company.  
Follow all warnings and instructions marked on the  
projector.  
Do not overload wall outlets and extension cords as  
this can result in fire or electric shock. Do not allow  
anything to rest on the power cord. Do not locate this  
projector where the cord may be damaged by persons  
walking on it.  
For added protection to the projector during a lightning  
storm, or when it is left unattended and unused for long  
periods of time, unplug it from the wall outlet. This  
will prevent damage due to lightning and power line  
surges.  
Do not attempt to service this projector yourself  
as opening or removing covers may expose you  
to dangerous voltage or other hazards. Refer all  
servicing to qualified service personnel.  
Do not expose this unit to rain or use near water... for  
example, in a wet basement, near a swimming pool,  
etc...  
Unplug this projector from wall outlet and refer  
servicing to qualified service personnel under the  
following conditions:  
Do not use attachments not recommended by the  
manufacturer as they may cause hazards.  
a.When the power cord or plug is damaged or frayed.  
b.If liquid has been spilled into the projector.  
c.If the projector has been exposed to rain or water.  
d.If the projector does not operate normally by  
following the operating instructions. Adjust only  
those controls that are covered by the operating  
instructions as improper adjustment of other controls  
may result in damage and will often require extensive  
work by a qualified technician to restore the projector  
to normal operation.  
Do not place this projector on an unstable cart, stand,  
or table. The projector may fall, causing serious injury  
to a child or adult, and serious damage to the projector.  
Use only with a cart or stand recommended by the  
manufacturer, or sold with the projector. Wall or shelf  
mounting should follow the manufacturer's instructions,  
and should use a mounting kit approved by the  
manufacturers.  
An appliance and cart combination  
should be moved with care.  
Quick stops, excessive force, and  
uneven surfaces may cause the  
appliance and cart combination to  
overturn.  
e.If the projector has been dropped or the cabinet has  
been damaged.  
f. When the projector exhibits a distinct change in  
performance-this indicates a need for service.  
When replacement parts are required, be sure the  
service technician has used replacement parts  
specified by the manufacturer that have the same  
characteristics as the original part. Unauthorized  
substitutions may result in fire, electric shock, or injury  
to persons.  
Slots and openings in the back and bottom of the  
cabinet are provided for ventilation, to ensure reliable  
operation of the equipment and to protect it from  
overheating.  
Upon completion of any service or repairs to this  
projector, ask the service technician to perform routine  
safety checks to determine that the projector is in safe  
operating condition.  
The openings should never be covered with cloth or  
other materials, and the bottom opening should not be  
blocked by placing the projector on a bed, sofa, rug, or  
other similar surface. This projector should never be  
placed near or over a radiator or heat register.  
This projector should not be placed in a built-  
in installation such as a book case unless proper  
ventilation is provided.  
Never push objects of any kind into this projector  
through cabinet slots as they may touch dangerous  
voltage points or short out parts that could result in a  
fire or electric shock. Never spill liquid of any kind on  
the projector.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Safety Instructions  
Air Circulation  
Installing the Projector  
in Proper Position  
Install the projector properly. Improper Installation  
may reduce the lamp life and cause a fire hazard.  
Openings in the cabinet are provided for ventilation  
and to ensure reliable operation of the product and to  
protect it from overheating, and these openings must  
not be blocked or covered.  
CAUTION  
Do not tilt the projector more than  
ꢀ0 degrees from side to side.  
Hot air is exhausted from the exhaust vent. When  
using or installing the projector, the following  
precautions should be taken.  
– Do not put any flammable object or spray can  
near the projector, hot air is exhausted from the  
ventilation holes.  
Do not point the projector up to  
project an image.  
– Keep the exhaust vent at least 3' (1 m) away from  
any objects.  
– Do not touch a peripheral part of the exhaust vent,  
especially screws and metallic part. This area will  
become hot while the projector is being used.  
– Do not put anything on the cabinet. Objects put  
on the cabinet will not only get damaged but also  
cause fire hazard by heat.  
Do not point the projector down  
to project an image.  
Do not put the projector on either  
side to project an image.  
Cooling fans are provided to cool down the  
projector. The fans’ running speed is changed  
according to the temperature inside the projector.  
Moving the Projector  
When moving the projector, replace the lens cover  
and retract the adjustable foot to prevent damage to  
the lens and cabinet. When the projector is not in use  
for an extended period, put it into a suitable case to  
protect the projector.  
When handling the projector, do not drop, bump,  
subject it to strong forces, or put other things on the  
cabinet.  
Air Intake Vent  
USE CAUTION IN CARRYING OR  
TRANSPORTING THE PROjECTOR  
Air Intake Vent  
– Do not drop or bump the projector, otherwise  
damages or malfunctions may result.  
Exhaust Vent  
– When carrying the projector, use a suitable  
carrying case.  
(Hot air exhaust)  
– Do not transport the projector by using a courier  
or transport service in an unsuitable transport  
case. This may cause damage to the projector.  
To transport the projector through a courier or  
transport service, consult your dealer for their  
information.  
Air Intake Vent  
– Do not put the projector in a case before the  
projector is cooled enough.  
Exhaust Vent  
(Hot air exhaust)  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Compliance  
Federal Communications Commission Notice  
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against  
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio  
frequency energy, and if not installed and used in accordance with the instructions, may cause harmful  
interference to radio communications. However, there is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause harmful interference to radio or television reception,  
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
– Reorient or relocate the receiving antenna.  
– Increase the separation between the equipment and receiver.  
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
– Consult the dealer or an experienced radio/TV technician for help.  
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.  
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If  
such changes or modifications should be made, you could be required to stop operation of the equipment.  
Model Number  
Trade Name  
: PLC-XE3ꢀ  
: Sanyo  
Responsible party : SANYO FISHER COMPANY  
Address  
Telephone No.  
: ꢀ1605 Plummer Street, Chatsworth, California 91311  
: (818)998-73ꢀꢀ  
AC Power Cord Requirement  
The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.  
AC Power Cord for the United States and Canada:  
AC Power Cord used in the United States and Canada is listed by the Underwriters  
Laboratories (UL) and certified by the Canadian Standard Association (CSA).  
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure  
that the plug will fit into the power outlet. Do not try to defeat this safety feature. Should  
you be unable to insert the plug into the outlet, contact your electrician.  
GROUND  
AC Power Cord for the United Kingdom:  
This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin  
face of the plug. Should the fuse need to be replaced, an ASTA approved BS 136ꢀ fuse must be used of the  
ASA  
same rating, marked thus  
. If the fuse cover is detachable, never use the plug with the cover omitted. If a  
replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug  
(i.e. red or orange). Fuse covers are available from the Parts Department indicated in your User Instructions.  
If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed.  
The end of the flexible cord should be suitably prepared and the correct plug fitted.  
WARNING : A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET  
OUTLET.  
The Wires in this mains lead are coloured in accordance with the following code:  
Green-and-yellow . . . . . . Earth  
Blue. . . . . . . . . . . . . . . . . Neutral  
Brown . . . . . . . . . . . . . . . Live  
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured  
markings identifying the terminals in your plug proceed as follows:  
The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked  
by the letter E or by the safety earth symbol  
or coloured green or green-and-yellow.  
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or  
coloured black.  
The wire which is coloured brown must be connected to the terminal which is marked with the letter L or  
coloured red.  
WARNING: THIS APPARATUS MUST BE EARTHED.  
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Part Names and Functions  
Front  
Speaker  
Zoom Ring (rear side)  
Infrared Remote Receiver  
Focus Ring (front side)  
Projection Lens  
Lens Cap  
CAUTION  
Do not turn on a projector with lens cap  
attached. High temperature from light  
beam may damage lens cap and result in  
fire hazard.  
④⑤  
②③  
Air Intake Vent  
Exhaust Vents  
Back  
⑨ ⑩  
CAUTION  
Hot air is exhausted from the exhaust vent.  
Do not put heat-sensitive objects near this  
side.  
Indicators  
Power Cord Connector  
Terminals and Connectors  
Air Intake Vents (back and  
bottom)  
Adjustable Foot  
Lamp Cover  
Bottom  
Air Filters  
Kensington Security Slot  
This slot is for a Kensington lock used to  
deter theft of the projector.  
*Kensington is a registered trademark of ACCO  
Brands Corporation.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Part Names and Functions  
Rear Terminal  
SERVICE PORT  
COMPONENT / COMPUTER AUDIO IN  
This jack is used to service the projector.  
Connect the audio output (stereo) from a  
computer or video equipment connected to  
to this jack. (p.15, 17)  
COMPUTER IN 1 / S-VIDEO IN  
/COMPONENT IN  
VIDEO IN  
Connect output signal from a computer,  
RGB scart ꢀ1-pin video output, S-VIDEO  
output, or component video output to this  
terminal. (p.15-17)  
Connect the composite video output from  
video equipment to VIDEO jack. (p.16)  
When the cable is of the longer variety, it  
is advisable to use this terminal and not  
COMPUTER IN ꢀ / MONITOR OUT.  
AUDIO IN  
Connect the audio output from video  
equipment connected to to this jack.  
(When the audio output is monaural,  
connect it to L (MONO) jack.) (p.16)  
COMPUTER IN 2 / MONITOR OUT  
This terminal is switchable and can be used  
for input from a computer or output to the  
other monitor. (p.15, 17)  
Set the terminal up as either Computer  
input or Monitor output properly. (Use  
for Monitor out, this terminal output only  
incoming signal from COMPUTER IN 1/  
S-VIDEO IN/COMPONENT IN terminal.)  
(p.15,17,45)  
AUDIO OUT (VARIABLE)  
Connect an external audio amplifier to this  
jack. (p.15 - 17)  
This terminal outputs sound from AUDIO IN  
terminal (or ).  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Part Names and Functions  
Top Panel  
POWER indicator  
Emit a red light until the projector gets ready to be turned on. It turns red when the projector is in  
the stand-by mode. It remains green while the projector is under operation. (p.18, 19, 60)  
WARNING indicator  
Emit a red light when the projector detects an abnormal condition. This also blinks red when the  
internal temperature of the projector exceeds the operating range. (p.51, 60)  
LAMP REPLACE indicator  
Turn yellow when the life of the projection lamp draws to an end. (p.54, 60)  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Part Names and Functions  
Remote Control  
POWER ON/STAND-BY button  
Turn the projector on or off. (p.18, 19)  
VIDEO button  
Select VIDEO input source. (p.ꢀ3, 34)  
COMPUTER button  
Select COMPUTER input source. (p.ꢀ3, ꢀ5, 35)  
MENU button  
Open or close the On-Screen Menu. (pꢀ0)  
Point ▲▼◄► (VOLUME + / –) buttons  
– Select an item or adjust the value in the On-  
Screen Menu. (p.ꢀ0)  
– Pan the image in Digital zoom + mode. (p.33)  
– Adjust the volume level. (Point ◄► buttons) (p.ꢀ3)  
SELECT button  
– Execute the selected item. (p.ꢀ0)  
– Expand or compress the image in Digital zoom  
mode. (p.33)  
D.ZOOM ▲▼ buttons  
Zoom in and out the images. (p.ꢀ4, 33)  
FREEZE button  
Freeze the picture. (p.ꢀ3)  
NO SHOW button  
Temporarily turn off the image on the screen. (p.ꢀ4)  
LAMP CONTROL button  
Select the lamp mode. (p.ꢀ4, 47)  
MUTE button  
Mute the sound. (p.ꢀ3)  
P-TIMER button  
Operate the P-timer function. (p.ꢀ4)  
IMAGE button  
Select the image level. (p.ꢀ4, 30, 37)  
AUTO PC button  
Automatically adjust the computer image to its  
optimum setting. (p.ꢀ4, ꢀ7)  
KEYSTONE button  
⑧ ⑨  
Correct the keystone distortion. (p.ꢀꢀ, 41)  
Note: To ensure safe operation, please observe the following  
precautions:  
– Do not bend, drop or expose the remote control to  
moisture or heat.  
– For cleaning, use soft dry cloth. Do not apply benzene,  
thinner, splay or any chemical material.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Part Names and Functions  
Remote Control Battery Installation  
Open the battery  
compartment lid.  
Install new batteries  
into the compartment.  
Replace the  
compartment lid.  
1
2
3
Two AA size batteries  
For correct polarity  
(+ and –), be sure  
battery terminals are in  
contact with pins in the  
compartment.  
To ensure safe operation, please observe the following precautions:  
● Use two (2) AA or LR6 type alkaline batteries.  
● Always replace batteries in sets.  
● Do not use a new battery with a used battery.  
● Avoid contact with water or liquid.  
● Do not expose the remote control to moisture or heat.  
● Do not drop the remote control.  
● If the battery has leaked on the remote control, carefully wipe the case clean and install  
new batteries.  
● Risk of explosion if a battery is replaced by an incorrect type.  
● Dispose of used batteries according to the instructions.  
Operating Range  
16.4'  
(5 m)  
Point the remote control toward the  
projector (Infrared Remote Receiver)  
when pressing any button. Maximum  
operating range for the remote control is  
about 16.4' (5 m) and 60° in front of the  
projector.  
1ꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installation  
Positioning the Projector  
For projector positioning, see the figures below. The projector should be set horizontally to the flat  
screen.  
Note:  
• The brightness in the room has a great influence on picture quality. It is recommended to limit  
ambient lighting in order to obtain the best image.  
• The values shown below are approximate and may vary from the actual sizes.  
43.3' (13.ꢀ m)  
(Inch Diagonal)  
A : B = 6 : 1  
300"  
ꢀ50"  
Max. Zoom  
ꢀ3.9' (7.3 m)  
18.0' (5.5 m)  
ꢀ00"  
166"  
Min. Zoom  
11.8' (3.6 m)  
150"  
1ꢀ6"  
A
4.6' (1.4 m)  
100"  
83"  
40"  
33"  
(Center)  
B
Screen Size  
(W x H) mm  
40"  
100"  
150"  
ꢀ00"  
300"  
4 : 3 aspect ratio  
813 x 610  
5.6' (1.7 m)  
4.6' (1.4 m)  
ꢀ03ꢀ x 15ꢀ4  
14.4' (4.4 m)  
11.8' (3.6 m)  
3048 x ꢀꢀ86  
ꢀ1.7' (6.6 m)  
18.0' (5.5 m)  
4064 x 3048  
ꢀ8.9' (8.8 m)  
ꢀ3.9' (7.3 m)  
6096 x 457ꢀ  
43.3' (13.ꢀ m)  
36.1' (11.0 m)  
Zoom (min)  
Zoom (max)  
Adjustable Foot  
Projection angle can be adjusted up to 10.0 degrees  
with the adjustable foot.  
Press the Foot Lock Latch upward to release the  
adjustable foot. At the desirable angle, release the  
latch to lock the adjustable foot. Rotate the adjustable  
foot from side to side for fine adjust.  
Keystone distortion of the projected image can be  
corrected by menu operation. (p.ꢀꢀ, 41)  
Foot Lock Latch  
(Press upward)  
Adjustable Foot  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installation  
Connecting the AC Power Cord  
This projector uses nominal input voltages of 100-1ꢀ0 V  
or ꢀ00-ꢀ40 V AC and it automatically selects the correct  
input voltage. It is designed to work with single-phase  
power systems having a grounded neutral conductor.  
To reduce the risk of electrical shock, do not plug into  
any other type of power system.  
If you are not sure of the type of power being supplied,  
consult your authorized dealer or service station.  
Connect the projector with all peripheral equipment  
before turning the projector on. (See pages 15-17 for  
connection.)  
Connect the AC power cord (supplied) to the  
projector.  
CAUTION  
The AC outlet must be near this equipment and must be  
easily accessible.  
Note: Unplug the AC power cord when the projector is not in  
use. When this projector is connected to an outlet with  
the AC power cord, it is in Stand-by mode and consumes  
a little electric power.  
NOTE ON THE POWER CORD  
AC power cord must meet requirements of the country where you use the projector.  
Confirm the AC plug type with the chart below and proper AC power cord must be used.  
If supplied AC power cord does not match your AC outlet, contact your sales dealer.  
Projector side  
AC outlet side  
For the U.S.A. and Canada  
For Continental Europe  
For the U.K.  
Ground  
To power cord  
connector on your  
projector.  
To the AC outlet.  
(120 V AC)  
To the AC outlet.  
(200 - 240 V AC)  
To the AC outlet.  
(200 - 240 V AC)  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installation  
Connecting to a Computer  
Cables used for connection  
• VGA Cables (Mini D-sub 15 pin) (Only one cable is supplied.)  
• Audio Cables (Mini Plug: stereo)  
( Not all the cables are supplied with this projector.)  
External Audio Equipment  
Audio Input  
Monitor  
Input  
Monitor  
Output  
Audio Output  
VGA cable  
Audio cable  
VGA  
(stereo)  
cable  
Audio cable  
(stereo)  
COMPUTER IN 1  
/S-VIDEO IN  
/COMPONENT IN  
COMPUTER IN ꢀ  
/ MONITOR OUT  
AUDIO OUT  
(stereo)  
COMPONENT  
/COMPUTER  
AUDIO IN  
Note:  
Unplug the power cords of  
both the projector and external  
equipment from the AC outlet  
before connecting cables.  
• Input sound to the COMPONENT/COMPUTER  
AUDIO IN terminal when using the COMPUTER IN  
1 /S-VIDEO IN/COMPONENT IN terminal as input.  
When the AUDIO OUT is plugged-in, the  
projector's built-in speaker is not available.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installation  
Connecting to Video Equipment  
Cables used for connection  
• Video and Audio Cable (RCA x 3)  
• S-Video Cable  
• S-Video-VGA Cable  
• Audio Cables (Mini Plug: stereo)  
( Not all the cables are supplied with this projector.)  
Composite Video and Audio Output  
S-Video Output  
(R) (L)  
(R) (L)  
(Video)  
External Audio Equipment  
S-Video cable  
Video and  
Audio cable  
Audio cable  
Audio Input  
S-Video-VGA cable  
AUDIO IN  
(stereo)  
(R) (L)  
(Video)  
S-VIDEO  
AUDIO IN  
VIDEO IN  
Audio cable  
AUDIO OUT  
(stereo)  
Note:  
• When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available.  
• See page 63 for ordering optional cables.  
Unplug the power cords of both the projector and external equipment from the AC outlet  
before connecting cables.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installation  
Connecting to Component Video and RGB (Scart) Equipment  
Cables used for connection  
• Audio Cables (Mini Plug :stereo)  
• Scart-VGA Cable  
• Component Cable  
• Component-VGA Cable  
( Not all the cables are supplied with this projector.)  
Audio Output  
RGB Scart  
ꢀ1-pin Output  
Component Video Output  
(Y, Pb/Cb, Pr/Cr)  
External Audio Equipment  
Component  
cable  
Audio Input  
Scart-VGA  
cable  
Audio cable  
(stereo)  
Audio cable  
(stereo)  
AUDIO OUT  
(stereo)  
COMPUTER IN 1 /S-VIDEO IN  
/COMPONENT IN  
COMPONENT/  
COMPUTER  
AUDIO IN  
Note:  
• When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available.  
• RGB Scart signal can not be output from the OUTPUT terminal.  
• See page 63 for ordering optional cables.  
Unplug the power cords of both the projector and external equipment from the AC outlet  
before connecting cables.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Basic Operation  
Turning On the Projector  
Complete peripheral connections (with a computer,  
VCR, etc.) before turning on the projector.  
1
16  
Connect the projector's AC power cord into an AC  
outlet. The POWER indicator becomes red.  
2
Press the POWER ON/STAND-BY button on the  
3
remote control. The POWER indicator becomes  
green and the cooling fans start to operate. The  
preparation display appears on the screen and the  
count down starts.  
The preparation display disappears after 30  
seconds.  
Selected Input Source and Lamp Mode  
After the countdown, the input source that was  
selected the last time and the Lamp mode status  
icon (see page 47) appears on the screen.  
1
4
Lamp mode  
(See page 47 for Lamp mode.)  
If the projector is locked with a PIN code, PIN code  
Input Dialog Box appears. Enter the PIN code as  
instructed below.  
PIN Code Input Dialog Box  
To Enter a PIN code  
Select a number by pressing the Point ▲▼ buttons,  
and then press the Point button to fix the number  
and move the pointer. The number changes to "". If  
you fixed an incorrect number, move the pointer to the  
number you want to correct by pressing the Point ◄  
button, and then select the correct number by pressing  
the Point ▲▼ buttons.  
Repeat this step to complete entering a four-digit  
number.  
"1ꢀ34" is set as the initial PIN code at the factory.  
After the OK icon  
disappears, you can  
operate the projector.  
After entering the four-digit number, move the pointer  
to "Set" by pressing the Point button. Press the  
SELECT button so that you can start to operate the  
projector.  
Note:  
• When the Input Search function is set  
on On1 or Onꢀ, the input signal will  
be searched automatically (p.45)  
If you entered an incorrect PIN code, "PIN code" and  
the number () turns red. Enter the PIN code all  
over again.  
• When the Logo select function is off,  
the logo is not shown on the screen.  
(p.4ꢀ)  
What is PIN code?  
• When the "Countdown off" or "Off"  
is selected in the Display function,  
the countdown is not shown on the  
screen. (p.4ꢀ)  
• During the countdown period, all  
operations are invalid.  
PIN (Personal Identification Number) code that allows  
the person who knows it to operate the projector.  
Setting a PIN code prevents unauthorized use of the  
projector.  
A PIN code consists of a four-digit number. Refer to the  
PIN code lock function in the Setting on pages 48 and  
49 for locking operation of the projector with your PIN  
code.  
• If the correct PIN code number is  
not input for three minutes after the  
PIN code dialog box appeared, the  
projector is turned off automatically.  
CAUTION ON HANDLING PIN CODE  
If you forget your PIN code, the projector can no longer be started. Set a new PIN code with special care,  
write it down in column on page 65 of this manual, and keep it at hand. Should the PIN code be missing  
or forgotten, consult your dealer or service center.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Basic Operation  
Turning Off the Projector  
Press the POWER ON/STAND-BY button on  
the remote control, and a message "Power off?"  
appears on the screen.  
1
Press the POWER ON/STAND-BY button again  
2
to turn off the projector. The POWER indicator  
starts to blink red, and it continues while the  
cooling fans are operating for about 1ꢀ0 seconds.  
(You can select the level of fan quietness and  
rotation speed. See page 50.)  
The message disappears after 4 seconds.  
At this time you can disconnect the AC power  
cord even if the fans are still running.  
When the projector has cooled down enough to  
be turned on again, the POWER indicator lights  
red.  
3
TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU  
TURN THE PROJECTOR ON, WAIT AT LEAST FIVE  
MINUTES BEFORE TURNING IT OFF.  
D O N O T O P E R AT E T H E P R O J E C T O R  
CONTINUOUSLY WITHOUT REST. CONTINUOUS  
USE MAY RESULT IN SHORTENING THE LAMP  
LIFE. TURN OFF THE PROJECTOR AND LET  
STAND FOR ABOUT AN HOUR IN EVERY ꢀ4  
HOURS.  
Note:  
• When the On start function is on, this projector  
is turned on automatically by connecting the AC  
power cord to an AC outlet. (p.47)  
• The running speed of cooling fans is changed  
according to the temperature inside the projector.  
• Do not put the projector in a case before the  
projector is cooled enough.  
• If the WARNING indicator blinks or emits a red  
light, see "Warning Indicator" on page 51.  
• While the POWER indicator is blinking, lamp  
is being cooled down and the projector cannot  
be turned on. Wait until the POWER indicator  
becomes red to be turned on again.  
• The fan rotation will terminate directly if the AC  
power cord is unplugged immediately after the  
projector is turned off.  
• The projector can be turned on after the POWER  
indicator turns red. The waiting time to restart  
will be shortened when the normal power-  
off processing for fan cooling is completed,  
compared with the time the AC power cord is  
immediately unplugged after the power-off.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Basic Operation  
How to Operate the On-Screen Menu  
The projector can be adjusted or set via the On-Screen  
Menu. Refer to the following pages regarding each  
adjustment and setting procedures.  
Remote Control  
MENU button  
POINT buttons  
Press the MENU button to display the On-Screen  
Menu.  
1
Press the Point ◄► buttons to select a Menu icon  
to adjust and press the Point ▲▼ buttons to select  
2
an item to adjust.  
SELECT button  
Press the SELECT button to show the item data.  
To adjust the data, press the Point ◄► buttons.  
3
Menu icon  
On-Screen Menu  
Refer to the following pages for each adjustment.  
To close the On-Screen Menu, press the MENU  
button again.  
Pointer  
(red framed )  
Menu bar  
Pointer (red framed )  
Press the Point ▲▼ buttons to  
move the pointer.  
Note:  
The selected item is not active until the SELECT  
button is pressed.  
Item  
SELECT  
button  
Item data  
Press the Point◄►  
buttons to adjust the  
value.  
Quit  
Exit this menu.  
ꢀ0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Basic Operation  
Menu Bar  
For detailed functions, see Menu Tree on p.58, 59.  
For computer source  
Guide Window  
PC System Menu  
Image Select Menu Screen Menu  
Setting Menu  
Show the selected  
Menu of the  
On-Screen Menu.  
Used to select computer Used to select an  
Used to adjust size of Used to set  
image. [Normal / True the projector's  
system. (p.ꢀ6)  
image level among  
Dynamic, Standard,  
Real, Blackboard  
(Green), and Image  
1 ~ 4. (p.30)  
/ Wide / Full / Digital  
zoom +/–] (p.3ꢀ, 33)  
operating  
configurations.  
(p.41-50)  
Input Menu  
PC Adjust Menu  
Image Adjust Menu  
Sound Menu  
Used to select  
input source either parameters to match  
Computer or  
Video. (p.ꢀ5)  
Used to adjust  
Used to adjust computer  
image.[Contrast /  
Brightness / Color temp.  
/ White balance (R/G/B)  
/ Sharpness / Gamma]  
(p.31, 3ꢀ)  
Used to adjust the  
volume or mute the  
sound. (p.ꢀ3)  
with input signal  
format. (p.ꢀ7-ꢀ9)  
For video source  
Input Menu  
Image Select Menu  
Screen Menu  
Used to select input  
source either Video or  
Computer. (p.34, 35)  
Used to select an image level among  
Dynamic, Standard, Cinema, Blackboard  
(Green) and Image 1 ~ 4. (p.37)  
Used to set size of  
image to Normal or  
Wide. (p.40)  
Same function as  
menu for computer  
source.  
Same function  
as computer  
menu.  
AV System Menu  
Image Adjust Menu  
Used to select system  
of selected video  
source. (p.36)  
Used to adjust picture image.  
[Contrast / Brightness / Color / Tint  
/ Color temp. / White balance (R/  
G/B) / Sharpness / Gamma / Noise  
reduction / Progressive ] (p.38-39)  
ꢀ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Basic Operation  
Zoom and Focus Adjustment  
Focus Ring  
(Front side)  
Zoom Ring  
(Rear side)  
Rotate the Zoom Ring to zoom in and out.  
Rotate the Focus Ring to adjust the projected picture  
focus.  
Keystone Correction  
If a projected picture has keystone distortion, correct  
the image with Keystone adjustment.  
It is not available when On-Screen menu is displayed.  
• The arrows are white when there is no  
correction.  
• The direction of the arrow being corrected  
turns red.  
• The arrows disappear at the maximum  
correction.  
• If you press the KEYSTONE button on  
the remote control once more while the  
keystone dialog box is being displayed, the  
keystone adjustment is canceled.  
• The adjustable range can be limited  
depending on the input signal.  
Press the KEYSTONE button on the remote control.  
The keystone dialog box appears.  
Correct keystone distortion by pressing the Point ▲▼  
buttons on the remote control. Keystone adjustment  
can be memorized. (p.41)  
Reduce the lower width  
with the Point button.  
Reduce the upper width  
with the Point button.  
Remote Control  
KEYSTONE button  
POINT▲▼ buttons  
ꢀꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Basic Operation  
Sound Adjustment  
Direct Operation  
Remote Control  
VOL- button  
VOL+ button  
Volume  
Press the VOLUME+/– buttons on the remote control to  
adjust the volume. The volume dialog box appears on  
the screen for a few seconds.  
Mute  
MUTE button  
Press the MUTE button on the remote control to cut off  
the sound. To restore the sound to its previous level,  
press the MUTE button again or press the VOLUME  
+/– buttons.  
Approximate  
level of the  
volume.  
Mute function is also effective for AUDIO OUT jack.  
Menu Operation  
Press the MENU button to display the On-Screen  
Menu. Press the Point ◄► buttons to move the  
red framed pointer to the Sound Menu icon.  
1
Press the MUTE button to set the Mute  
function On/Off. The display disappears after  
4 seconds.  
Press the Point ▲▼ buttons to move the red  
framed pointer to the item that you want to select,  
and then press the SELECT button.  
2
Sound Menu  
Volume  
Sound Menu  
icon  
Press the Point button to turn up the volume, and  
Approximate level of  
the volume.  
press the Point button to turn down the volume.  
Mute  
Exit the Sound Menu.  
Press the Point ◄► buttons to cut off the sound.  
Dialog box display changes to "On" and the sound is  
cut off. To restore the sound to its previous level, press  
the Point ◄► buttons again.  
Remote Control  
COMPUTER/  
VIDEO buttons  
Remote Control Operation  
For some frequently used operations, using the remote  
control is advisable.  
Just pressing one of the buttons enables you to  
make the operation, and no need for calling up the  
On-Screen Menu.  
FREEZE button  
COMPUTER/VIDEO buttons  
Press the COMPUTER or VIDEO button on the remote  
control to select the input source. For more detail, see  
pages ꢀ5, 34, and 35.  
Note:  
See the next page for the other  
buttons.  
FREEZE button  
Press the FREEZE button on the remote control to  
freeze the picture on the screen. To cancel the Freeze  
function, press the FREEZE button again or press any  
other button.  
ꢀ3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Basic Operation  
AUTO PC button  
Remote Control  
Press the AUTO PC button on the remote control to  
operate the Auto PC function. For more detail, see  
page ꢀ7.  
VOLUME +/- buttons  
(See p.ꢀ3.)  
KEYSTONE button  
(See p.ꢀꢀ)  
D.ZOOM buttons  
POINT ▲▼ buttons  
Press the D.ZOOM buttons on the remote control to  
zoom in and zoom out the images. For more detail, see  
page 33.  
AUTO PC button  
(See p.ꢀ7.)  
IMAGE button  
P-TIMER button  
NO SHOW button  
NO SHOW button  
Press the NO SHOW button on the remote control to  
black out the image. To restore to normal, press the NO  
SHOW button again or press any other button. When  
a projected image is captured and set as "User" in the  
Logo selection (p.4ꢀ), the screen changes each time  
you press the NO SHOW button as follows.  
LAMP CONTROL  
button  
D.ZOOM buttons  
Note:  
See the previous page for the  
other buttons.  
• • • • •  
black out the captured image normal   
KEYSTONE button  
For detail, see page ꢀꢀ.  
IMAGE button  
Press the IMAGE button on the remote control to select  
a desired image level of the screen. For more detail,  
see pages 30 and 37.  
The message disappears after 4 seconds.  
P-TIMER button  
Press the P-TIMER button on the remote control. The  
timer display "00 : 00" appears on the screen and the  
timer starts to count time (00 : 00 ~ 59 : 59).  
To stop the P-Timer, press the P-TIMER button. Press  
the P-TIMER button again, then the P-timer display  
disappears.  
P-Timer display  
LAMP CONTROL button  
Press the LAMP CONTROL button on the remote  
control to select the lamp mode for changing the  
brightness of the screen.  
High.........Brighter than the Normal mode.  
Normal.....Normal brightness.  
Auto.........Brightness according with the input signal.  
ꢀ4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Computer Input  
Input Source Selection  
Remote Control  
Direct Operation  
COMPUTER button  
Choose Computer 1 or Computer ꢀ by pressing the  
COMPUTER button on the remote control. Before  
using this button, correct input source should be  
selected through Menu operation as described below.  
Computer 1  
Computer 2   
See Note at the bottom of this page.  
Input Menu icon  
Menu Operation  
Input Menu  
Press the MENU button to display the On-Screen  
Menu. Press the Point ◄► buttons to move the  
1
Move the pointer (red  
arrow) to Computer 1 and  
press the SELECT button.  
red framed pointer to the Input Menu icon.  
Press the Point ▲▼ buttons to move the red  
2
arrow pointer to either Computer 1 or Computer  
ꢀ, and then press the SELECT button.  
Computer  
1
After the Source Select Menu appeared for  
Computer 1, move the pointer to RGB and then  
press the SELECT button.  
3
Source Select Menu  
Move the pointer to RGB  
and press the SELECT  
button.  
Input Menu  
M o v e t h e p o i n t e r t o  
COMPUTER ꢀ and press  
the SELECT button.  
Note:  
When the Input Search function is set On1  
or Onꢀ, the input signal will be searched  
automatically. (p.45)  
• Computer ꢀ is not displayed when the COMPUTER IN ꢀ  
/ MONITOR OUT terminal is set as Monitor out. (p.45)  
• Computer ꢀ (COMPUTER IN ꢀ / MONITOR OUT) can  
accept only RGB signal.  
ꢀ5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Computer Input  
Computer System Selection  
This projector automatically tunes to various types of computers based on VGA, SVGA, XGA,  
SXGA, WXGA, or UXGA with its Multi-scan system and Auto PC Adjustment. If Computer is  
selected as a signal source, this projector automatically detects the signal format and tunes to  
project a proper image without any additional setting. (Signal formats provided in this projector is  
shown on page 61.)  
One of the following messages may appear when:  
PC System Menu  
The projector cannot recognize the  
connected signal conforming to the  
provided PC Systems. The message "Auto"  
is displayed on the PC System Menu icon  
and the Auto PC Adjustment function works  
to display proper images. If the image is not  
projected properly, a manual adjustment is  
required. (p.ꢀ8, ꢀ9)  
Auto  
The Auto PC Adjustment  
function operates to adjust  
the projector.  
There is no signal input from computer.  
Check the connection between your  
computer and the projector. (See  
"Troubleshooting" on page 56.)  
----  
The preset system is manually adjusted in  
the PC Adjust Menu. The adjusted data can  
be stored in Mode 1 ~ 5. (p.ꢀ8, ꢀ9)  
Mode 1  
SVGA 1  
PC Systems provided in this projector is  
chosen. The projector chooses a proper  
system provided in the projector and  
displays it.  
*Mode 1 and SVGA 1 are examples.  
Selecting Computer System Manually  
PC System Menu  
PC system can also be selected manually.  
Press the MENU button to display the On-Screen  
Menu. Press the Point ▲▼ buttons to move the  
The PC System Menu icon  
Selected system is displayed.  
1
red framed pointer to the PC System Menu icon.  
Systems on this dialog  
box can be selected.  
Press the Point ▲▼ buttons to move the red arrow  
pointer to the system that you want to set, and then  
press the SELECT button.  
2
Custom Mode (1 ~ 5) set in the  
PC Adjust Menu. (p.ꢀ7, ꢀ9)  
ꢀ6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Computer Input  
Auto PC Adjustment  
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal,  
and Vertical to conform to your computer. Auto PC Adjustment function can be operated as follows.  
Direct Operation  
Remote Control  
The Auto PC adjustment function can be operated  
directly by pressing the AUTO PC button on the remote  
control unit.  
AUTO PC button  
Menu Operation  
Auto PC Adj.  
PC Adjust Menu  
Press the MENU button to display the On-Screen  
Menu. Press the Point ◄► buttons to move the  
1
PC Adjust Menu icon  
red framed pointer to PC Adjust Menu item.  
Move the red framed pointer to  
the Auto PC Adj. item and press  
the SELECT button.  
Press the Point ▲▼ buttons to move the red  
framed pointer to Auto PC Adj. item and then press  
the SELECT button twice.  
2
"Please wait..." message appears  
while Auto PC adjustment is in  
process.  
To store adjustment parameters  
Adjustment parameters from Auto PC Adjustment can  
be memorized in this projector. Once parameters are  
memorized, the setting can be done just by selecting  
Mode in the PC System Menu (p.ꢀ6). See "Store" on  
page ꢀ9.  
Note:  
• Fine sync, Total dots, Horizontal, and Vertical of  
some computers cannot be fully adjusted with this  
Auto PC Adjustment function. When the image is  
not provided properly with this operation, manual  
adjustments are required. (p.ꢀ8, ꢀ9)  
• The Auto PC Adjustment cannot be operated when  
480i, 575i, 480p, 575p, 7ꢀ0p,1035i, or 1080i is  
selected in the PC System Menu. (p.ꢀ6)  
ꢀ7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Computer Input  
Manual PC Adjustment  
Some computers employ special signal formats which may not be tuned by Multi-scan system of  
this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match  
those signal formats. The projector has 5 independent memory areas to memorize those parameters  
manually adjusted. It allows you to recall the setting for a specific computer.  
PC Adjust Menu icon  
Press the MENU button to display the On-Screen  
Menu. Press the Point ◄► buttons to move the red  
framed pointer to the PC Adjust Menu icon.  
PC Adjust Menu  
1
2
Press the Point ▲▼ buttons to move the red  
framed pointer to the item that you want to adjust  
and then press the SELECT button to display the  
adjustment dialog box. Press the Point ◄► buttons  
to adjust the value.  
Move the red framed  
pointer to an item and press  
the SELECT button.  
Fine sync  
Press the Point ◄► buttons to adjust the value to  
eliminate flicker from the image displayed. (From 0 to  
31.)  
Status (Stored/Free)  
of the selected Mode.  
Selected Mode  
Total dots  
Press the Point ◄► buttons to adjust the number of  
total dots in one horizontal period to match your PC  
image.  
Press the Point ◄►  
buttons to adjust the  
value.  
Horizontal  
Press the Point ◄►buttons to adjust the horizontal  
picture position.  
Press the SELECT  
button at this item to  
adjust other items.  
Vertical  
Press the Point ◄► buttons to adjust the vertical  
picture position.  
Current mode  
Press the SELECT button to show H-sync freq. and  
V-sync freq. of the connected computer.  
Clamp  
Press the Point ◄► buttons to adjust clamp level.  
When the image has dark bars, try this adjustment.  
Press the SELECT button  
at the Current mode item to  
show the information of the  
connected computer.  
ꢀ8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Computer Input  
Display area H  
Press the Point ◄► buttons to adjust the horizontal  
area displayed by this projector.  
Display area V  
Press the Point ◄► buttons to adjust the vertical area  
displayed by this projector.  
Move the red framed  
pointer to an item and  
Reset  
press the SELECT button.  
To reset the adjusted data, select Reset and press  
the SELECT button. The confirmation box appears  
and then select [Yes]. All adjustments return to their  
previous figures.  
Mode free  
This Mode has stored parameters.  
To clear the stored data, select Mode free and press  
the SELECT button. Move the red arrow pointer to  
the Mode that you want to clear and then press the  
SELECT button.  
To clear adjusted data  
Store  
To store the adjusted data, select Store and press the  
SELECT button. Move the red arrow pointer to any of  
Mode 1 to 5 in which you want to store and then press  
the SELECT button.  
Vacant Mode  
Values of "Total dots",  
"Horizontal", "Vertical",  
"Display area H" and  
"Display area V".  
Quit  
Exit the PC Adjust Menu.  
To store adjusted data  
Close this dialog box.  
Note:  
Display area (H/V) cannot be selected when 480i,  
575i, 480p, 575p, 7ꢀ0p, 1035i, or 1080i is selected  
in the PC System Menu (p.ꢀ6).  
ꢀ9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Computer Input  
Image Level Selection  
Direct Operation  
Remote Control  
Select an image level among Dynamic, Standard, Real,  
Blackboard (Green), Image 1, Image ꢀ, Image 3, and  
Image 4 by pressing the IMAGE button on the remote  
control.  
IMAGE button  
Dynamic  
IMAGE button  
Dynamic  
Picture level suitable for viewing picture in a bright  
room.  
Standard  
Real  
Standard  
Normal picture level preset on this projector.  
Real  
Picture level with improved halftone for graphics.  
Blackboard (Green)  
Image 1  
Blackboard (Green)  
Picture level suitable for the image projected on a  
blackboard. This mode assists to enhance the image  
projected on a blackboard. This is mainly effective on  
a green colored board, not truly effective on a black  
colored board.  
Image 2  
Image 3  
Image 1 ~ 4  
User preset image in the Image Adjust Menu. (p.3ꢀ)  
Image 4  
Menu Operation  
Press the MENU button to display the On-Screen  
Menu. Press the Point ◄► buttons to move the  
1
red framed pointer to the Image Select Menu icon.  
Image Select Menu icon  
Press the Point ▲▼ buttons to move the red  
2
framed pointer to the level that you want to set and  
then press the SELECT button.  
Image Select Menu  
Dynamic  
Picture level suitable for viewing picture in a bright  
room.  
Move the red framed  
pointer to the level and  
press the SELECT button.  
Standard  
Normal picture level preset on this projector.  
Real  
Picture level with improved halftone for graphics.  
Blackboard (Green)  
The level being selected.  
Picture level suitable for the image projected on a  
blackboard. See above for further description.  
Image 1 ~ 4  
User preset image in the Image Adjust Menu. (p.3ꢀ)  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Computer Input  
Image Level Adjustment  
Press the MENU button to display the On-Screen  
Menu. Press the Point ◄► buttons to move the  
Image Adjust Menu  
1
red framed pointer to the Image Adjust Menu icon.  
Press the Point ▲▼ buttons to move the red  
Image Adjust Menu icon  
Move the red framed  
pointer to the item to be  
selected and then press  
the SELECT button.  
2
framed pointer to the item that you want to adjust,  
and then press the SELECT button. The level  
of each item is displayed. Adjust each level by  
pressing the Point ◄► buttons.  
Contrast  
Press the Point button to decrease the contrast and  
the Point button to increase contrast. (From 0 to 63.)  
Brightness  
Press the Point button to adjust the image darker  
and the Point button to adjust the image brighter.  
(From 0 to 63.)  
Selected Image level  
Color temp.  
Press the Point ◄► buttons to select the desired Color  
temp. level. (XLow, Low, Mid, or High)  
Press the Point ◄►  
White balance (Red)  
buttons to adjust the  
value.  
Press the Point button to lighten the red tone and the  
Point button to deepen the red tone. (From 0 to 63.)  
White balance (Green)  
Press the Point button to lighten the green tone and  
the Point button to deepen the green tone. (From 0  
to 63.)  
White balance (Blue)  
Press the Point button to lighten the blue tone and  
the Point button to deepen the blue tone. (From 0 to  
63.)  
Sharpness  
Press the Point button to soften the image and the  
Point button to sharpen the image. (From 0 to 15.)  
Gamma  
Press the Point ◄► buttons to adjust the gamma value  
to obtain better balance of contrast. (From 0 to 15.)  
Reset  
Note:  
To reset the adjusted data, select Reset and press  
the SELECT button. The confirmation box appears  
and then select [Yes]. All adjustments returns to their  
previous figures.  
After adjusting any of the White  
balance Red, Green, or Blue, the  
Color temp changes to "Adj.".  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Computer Input  
Store  
To store the adjusted data, select Store and press the  
Move the red framed  
pointer to any of  
Image 1 to 4 where  
you want to set  
and then press the  
SELECT button.  
SELECT button. Select a level from Image 1 to 4 with  
the Point ▲▼ buttons and press the SELECT button. A  
confirmation box appears and then select [Yes].  
Stored data can be called up by selecting "Image" in  
the Image Level Selection on page 30.  
Quit  
Exit the Image Adjust Menu.  
The confirmation  
box appears,  
then select [Yes].  
Store item  
Press the SELECT  
button at this item to  
store the adjusted data.  
Screen Size Adjustment  
This projector has the picture screen resize function, which enables you to customize the image  
size.  
Press the MENU button to display the On-Screen  
Menu. Press the Point ◄► buttons to move the red  
framed pointer to the Screen Menu icon.  
Screen Menu  
1
2
Screen Menu icon  
Move the red framed pointer  
to the function and press the  
SELECT button.  
Press the Point ▲▼ buttons and move the red  
framed pointer to the function that you want to  
select and then press the SELECT button.  
Normal  
Provide the image to fit the screen size.  
True  
Note:  
Provide the image in its original size. When the original  
image size is larger than the screen size (10ꢀ4 x 768 ),  
this projector enters panning mode automatically. Pan  
the image with Point ▲▼◄► buttons. When adjusted,  
the arrows turns red. When reached to the correction  
limit, the arrows disappears.  
This Screen Menu cannot be  
operated when 7ꢀ0p(HDTV), 1035i  
(HDTV), or 1080i (HDTV) is selected  
in the PC System Menu (p.ꢀ6).  
• The projector cannot display any  
resolution higher than 1600x1ꢀ00.  
If your computer’s screen resolution  
is higher than it, reset the resolution  
to the lower before connecting to the  
projector.  
• The image data in other than XGA  
(10ꢀ4x768) is modified to fit the  
screen size in initial mode.  
Wide  
Provide the image to fit wide video aspect ratio (16:9)  
by expanding the image width uniformly. This function  
can be used for providing a squeezed video signal at  
16:9.  
• True, Full, and Digital zoom +/–  
cannot be selected when 480i, 575i,  
480p, or 575p is selected in the PC  
System Menu (p.ꢀ6).  
Full  
Provide the full screen image.  
3ꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Computer Input  
For zooming in and out the images  
Remote Control  
Digital zoom +  
POINT buttons  
When the D.ZOOM + () is pressed, the On-Screen  
Menu disappears and the message "D. zoom +"  
is displayed. Press the D.ZOOM or the SELECT  
button to expand the image size. And press the  
Point ▲▼◄► buttons to pan the image. The Panning  
function can work only when the image is larger than  
the screen size.  
SELECT button  
D.ZOOM + button  
D.ZOOM - button  
Digital zoom –  
When D.ZOOM – () is pressed, the On-Screen Menu  
disappears and the message "D. zoom –" is displayed.  
Press the D.ZOOM or the SELECT button to  
compress image size.  
Note:  
The panning function may not  
operate properly if the stored Mode  
in the PC Adjust Menu is used.  
(p.ꢀ9)  
• True, Full, and Digital zoom +/–  
cannot be selected when 480i, 575i,  
480p, or 575p is selected in the PC  
System Menu (p.ꢀ6).  
• Digital zoom +/- cannot be selected  
when Full or True is selected.  
This is used to reducing the size into original size.  
To exit the Digital zoom +/– mode, press any button  
except the D.ZOOM ▲▼ buttons, SELECT, and Point  
buttons.  
To return to the previous screen size, select a screen  
size from the Screen Size Adjustment or select an input  
source from the Input Source Selection (p.ꢀ5) again, or  
adjust the screen size with the D.ZOOM ▲▼ buttons.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Video Input  
Input Source Selection (Video)  
Direct Operation  
Remote Control  
VIDEO button  
Choose Video by pressing the VIDEO button on the  
remote control.  
VIDEO button  
Video  
Menu Operation  
Input Menu icon  
Press the MENU button to display the On-Screen  
Menu. Press the Point ◄► buttons to move the red  
Input Menu  
1
framed pointer to the Input Menu icon.  
Move the pointer to  
Video and press the  
SELECT button.  
Press the Point ▲▼ buttons to move the red arrow  
pointer to Video and then press the SELECT  
button.  
2
Note:  
When the Input Search function is set On1 or Onꢀ,  
the input signal will be searched automatically  
(p.45)  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Video Input  
Input Source Selection (S-Video, Component, RGB Scart 21-pin)  
Remote Control  
Direct Operation  
COMPUTER button  
Choose Computer 1 by pressing the COMPUTER  
button on the remote control.  
Before using this button, correct input source should be  
selected through Menu operation as described below.  
COMPUTER button  
Computer 1  
Computer 2   
See Note at the bottom of this page.  
Menu Operation  
Input Menu icon  
Press the MENU button to display the On-Screen  
Menu. Press the Point ◄► buttons to move the  
1
Input Menu  
red framed pointer to the Input Menu icon.  
Press the Point ▲▼ buttons to move the red arrow  
pointer to Computer 1 and then press the SELECT  
button.  
Move the pointer (red  
arrow) to Computer 1 and  
press the SELECT button.  
2
After the Source Select Menu appeared for  
3
Computer  
1
Computer 1, move the pointer to S-Video,  
Component or RGB (Scart) and then press the  
SELECT button.  
Source Select Menu  
W h e n S - v i d e o i n p u t s i g n a l i s  
connected to the COMPUTER IN  
1/S-VIDEO IN/COMPONENT IN jack,  
select S-Video.  
S-Video  
Move the pointer to  
S-Video, Component or  
RGB (Scart) and press the  
SELECT button.  
When the input source is coming  
from video equipment connected  
to the COMPUTER IN 1/S-VIDEO  
IN/COMPONENT IN terminal with  
a Component-VGA Cable, select  
Component.  
Component  
When the input source is coming  
from video equipment connected to  
the COMPUTER IN 1/S-VIDEO IN/  
COMPONENT IN terminal with a Scart-  
VGA Cable, select RGB (Scart).  
RGB (Scart)  
Note:  
When the Input Search function is set On1 or Onꢀ,  
the input signal will be searched automatically  
(p.45)  
When Monitor out is selected in the Terminal  
function (p.45), Computer ꢀ is not displayed.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Video Input  
Video System Selection  
Press the MENU button to display the On-Screen  
Menu. Press the Point ◄► buttons to move the red  
framed pointer to the AV System Menu icon.  
1
Press the Point ▲▼ buttons to move the red arrow  
pointer to the system that you want to select and  
then press the SELECT button.  
2
AV System Menu (Video or S-Video)  
Video or S-Video  
Auto  
The projector automatically detects incoming video  
system, and adjusts itself to optimize its performance.  
When Video System is PAL-M or PAL-N, select system  
manually.  
AV System Menu icon  
Selected system is  
displayed.  
Move the pointer to a  
system and press the  
SELECT button.  
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N  
If the projector cannot reproduce proper video image,  
it is necessary to select a specific broadcast signal  
format among PAL, SECAM, NTSC, NTSC 4.43,  
PAL-M, and PAL-N.  
AV System Menu (Component)  
Component  
Auto  
The projector automatically detects incoming video  
signal, and adjusts itself to optimize its performance.  
AV System Menu icon  
Selected system is  
displayed.  
COMPONENT VIDEO SIGNAL FORMAT  
If the projector cannot reproduce proper video image,  
it is necessary to select a specific component video  
signal format among 480i, 575i, 480p, 575p, 7ꢀ0p,  
1035i, and 1080i.  
Move the pointer to a  
system and press the  
SELECT button.  
Note:  
The AV System Menu cannot be selected when  
selecting RGB (Scart).  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Video Input  
Image Level Selection  
Direct Operation  
Remote Control  
Select an image level among Dynamic, Standard,  
Cinema, Blackboard (Green), Image 1, Image ꢀ, Image  
3, and Image 4 by pressing the IMAGE button on the  
remote control.  
IMAGE button  
IMAGE button  
Dynamic  
Dynamic  
Picture level suitable for viewing picture in a bright  
room.  
Standard  
Cinema  
Standard  
Normal picture level preset on this projector.  
Cinema  
Picture level adjusted for the picture with fine tone.  
Blackboard (Green)  
Image 1  
Blackboard (Green)  
Picture level suitable for the image projected on a  
blackboard. This is mainly effective on a green colored  
board, not truly effective on a black colored board.  
Image 2  
Image 1 ~ 4  
User preset image in the Image Adjust Menu (p.38, 39).  
Image 3  
Image 4  
Menu Operation  
Press the MENU button to display the On-Screen  
Menu. Press the Point ◄► buttons to move the  
1
red framed pointer to the Image Select Menu icon.  
Image Select Menu icon  
Press the Point ▲▼ buttons to move the red  
framed pointer to the level that you want to set and  
then press the SELECT button.  
2
Image Select Menu  
Dynamic  
Picture level suitable for viewing picture in a bright  
room.  
Move the red framed  
pointer to the level and  
press the SELECT button.  
Standard  
Normal picture level preset on this projector.  
Cinema  
Picture level adjusted for the picture with fine tone.  
Blackboard (Green)  
The level being selected.  
Picture level suitable for the image projected on a  
blackboard. See above for further description.  
Image 1~4  
User preset image in the Image Adjust Menu (p.38, 39).  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Video Input  
Image Level Adjustment  
Press the MENU button to display the On-Screen  
Menu. Press the Point ◄► buttons to move the  
red framed pointer to the Image Adjust Menu icon.  
Image Adjust Menu  
1
Press the Point ▲▼ buttons to move the red  
framed pointer to the item that you want to adjust,  
and then press the SELECT button. The level  
of each item is displayed. Adjust each level by  
pressing the Point ◄►buttons.  
Image Adjust Menu icon  
Move the red framed  
pointer to the item to be  
selected and then press  
the SELECT button.  
2
Contrast  
Press the Point button to decrease the contrast and  
the Point button to increase contrast. (From 0 to 63.)  
Brightness  
Press the Point button to adjust the image darker  
and the Point button to adjust the image brighter.  
(From 0 to 63.)  
Color  
Press the Point button to lighten the color and the  
Point button to deepen the color. (From 0 to 63.)  
Press the Point ◄►  
buttons to adjust the  
value.  
Tint  
Press the SELECT  
button at this item to  
display other items.  
Press the Point ◄► buttons to obtain a proper color.  
(From 0 to 63.)  
Color temp.  
Press the Point ◄► buttons to select the desired Color  
temp. level. (XLow, Low, Mid, or High)  
White balance (Red)  
Press the Point button to lighten the red tone and the  
Point button to deepen the red tone.  
(From 0 to 63.)  
Press the SELECT  
button at this item to  
display previous items.  
White balance (Green)  
Press the Point button to lighten the green tone and  
the Point button to deepen the green tone.  
(From 0 to 63.)  
White balance (Blue)  
Press the Point button to lighten the blue tone and  
the Point button to deepen the blue tone.  
(From 0 to 63.)  
Note:  
• The Tint cannot be selected when the video  
system is PAL, SECAM, PAL-M, or PAL-N.  
• After adjusting any of the White balance Red,  
Green, or Blue, the Color temp. changes to "Adj.".  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Video Input  
Sharpness  
Press the Point button to soften the image and the  
Point button to sharpen the image. (From 0 to 15.)  
Gamma  
Press the Point ◄► buttons to adjust the gamma value  
to obtain better balance of contrast. (From 0 to 15.)  
Noise reduction  
Noise interference on the screen can be reduced.  
Select one of the following to get smoother images.  
Off . . . . disabled.  
L1. . . . . lower reduction  
L. . . . . higher reduction  
Progressive  
Interlaced video signal can be displayed in a  
progressive picture. Select one of the following.  
Off . . . . disabled.  
L1. . . . . Select "L1" for an active picture.  
L. . . . . Select "Lꢀ" for a still picture.  
Film . . . Select "Film" for watching a film. With this  
function, the projector reproduces pictures  
faithful to the original film quality.  
Reset  
To reset the adjusted data, select Reset and press  
the SELECT button. The confirmation box appears  
and then select [Yes]. All adjustments returns to their  
previous figures.  
Store  
To store the adjusted data, select Store and press the  
SELECT button. Select a level from Image 1 to 4 with  
the Point ▲▼ buttons and press the SELECT button. A  
confirmation box appears and then select [Yes].  
Stored data can be called up by selecting "Image" in  
the Image Level Selection on page 37.  
Store item  
Image Level Menu  
Quit  
Move the red framed pointer  
to an image item to be set  
and then press the SELECT  
button.  
Exit the Image Adjust Menu.  
Note:  
Noise reduction and Progressive cannot be  
selected when 480p, 575p, 7ꢀ0p, 1035i, or 1080i  
is selected. (p.36)  
The confirmation box  
appears and then select  
[Yes].  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Video Input  
Screen Size Adjustment  
This projector has the picture screen resize function, which enables you to customize the image  
size.  
Press the MENU button to display the On-Screen  
Menu. Press the Point ◄► buttons to move the  
red framed pointer to the Screen Menu icon.  
Screen Menu  
1
2
Screen Menu icon  
Press the Point ▲▼ buttons and move the red  
framed pointer to the function that you want to  
select and then press the SELECT button.  
Move the red framed pointer to a  
function and press the SELECT  
button.  
Normal  
Provide the image at a normal video aspect ratio of 4:3.  
Wide  
Provide the image at a wide screen ratio of 16:9.  
Note:  
Screen Menu cannot be operated when 7ꢀ0p,  
1035i, or 1080i is selected in the AV System Menu  
(p.36).  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Setting  
Setting  
This projector has Setting menu that allows you to set  
up the other various functions described as follows:  
Setting Menu (Language)  
Press the MENU button to display the On-Screen  
Menu. Press the Point ◄► buttons to move the  
1
Setting Menu icon  
red framed pointer to the Setting Menu icon.  
Set the red framed pointer  
to the item and press the  
SELECT button.  
Press the Point ▲▼ buttons to move the red  
2
framed pointer to the item that you want to set and  
then press the SELECT button. The Setting dialog  
box appears.  
Press the SELECT  
Language  
button at Language  
item, the Language  
Menu appears.  
The language used in the On-Screen Menu is  
available in English, German, French, Italian, Spanish,  
Portuguese, Dutch, Swedish, Finnish, Polish,  
Hungarian, Romanian, Russian, Chinese, Korean, or  
Japanese.  
Keystone  
This function corrects distortion of a projected image.  
Select either Store or Reset with the Point ◄► buttons,  
and then press the SELECT button. The keystone  
dialog box appears. Correct keystone with the Point ▲  
buttons. (p.ꢀꢀ)  
Store . . . . store the keystone correction even when  
the AC power cord is unplugged.  
Reset . . . . reset the keystone correction when the  
AC power cord is unplugged.  
Press the SELECT  
button at this item  
to display the other  
languages.  
Blue back  
Press the Point ◄► buttons to switch On/Off. When  
this function is "On", a blue image is displayed while  
the input signal is not detected.  
Press the SELECT  
button at this item to  
close the dialog box.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Setting  
Display  
Press the Point ◄► buttons to switch On/Off. This  
function decides to display On-Screen Displays.  
On. . . . . . . . . . . . . Show all the On-Screen Displays.  
Use this function when you want  
to project images after the lamp  
becomes bright enough. Factory  
default setting is this mode.  
Countdown off . . . Show the input image instead of  
the countdown when turning on  
the projector. Use this function  
when you want to project the  
image as early as possible even  
when the lamp is not bright  
enough.  
Off. . . . . . . . . . . . . Do not show On-Screen Displays,  
except.  
● On-Screen Menu  
● "Power off?" message  
● P-Timer  
● "No signal" message for Power management item  
(p.46)  
● "Please wait..." message  
● Arrows for panning mode  
Logo (Logo and Logo PIN code lock settings)  
This function allows you to customize the screen logo  
with Logo select, Capture, and Logo PIN code lock  
functions.  
Note:  
When On is selected in Logo PIN code lock  
function, Logo select and Capture functions  
cannot be selected.  
Logo select  
Logo select  
This function decides the start-up display as follows:  
User. . . . the image you captured  
Default. . the factory-set logo  
Off . . . . . countdown only  
4ꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting  
Capture  
Capture  
This function enables you to capture the image  
being projected and use it for a start-up display or  
interval of presentations.  
After capturing the projected image, go to the  
Logo select function and set it to "User". Then  
the captured image is displayed when turning on  
the projector next time or pressing the NO SHOW  
button. (p.ꢀ4)  
To capture the image, select [Yes]. To cancel the  
Capture function, select [No].  
Select [Yes] to capture the  
projected image.  
Note:  
• Before capturing an image, select Standard  
in the Image Select Menu to capture a proper  
image. (p.30, 37.)  
• A signal from a computer can be captured  
up to XGA (10ꢀ4x768). A signal from video  
equipment can be captured except for 7ꢀ0p,  
1035i, and 1080i.  
Select [Yes] to stop  
capturing.  
• When capturing the image that has been  
adjusted by the Keystone function, the  
adjustment data is automatically reset and the  
projector captures an image without keystone  
adjustment.  
• When the Logo PIN code lock function is "On",  
Capture menu cannot be selected.  
• When starting to capture a new image, the  
previously stored image is cleared even if you  
cancel the capturing.  
• "User" can not be selected when the image is  
not captured.  
Logo PIN code lock  
Logo PIN code lock  
This function prevents an unauthorized person from  
changing the screen logo.  
Off . . . . . . the screen logo can be changed  
freely from the Logo select menu.  
(p.4ꢀ)  
On . . . . . . the screen logo cannot be changed  
without the Logo PIN code.  
If you want to change the Logo PIN code lock  
setting, enter a Logo PIN code along the following  
steps. The initial Logo PIN code is set "43ꢀ1" at the  
factory.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting  
Logo PIN code lock Dialog Box  
To Enter the Logo PIN code  
Select a number by pressing the Point ▲▼ buttons.  
And then press the Point button to fix the number  
and move the pointer. The number changes to "".  
If you fixed an incorrect number, move the pointer  
to the number you want to correct by pressing the  
Point button, and then select the correct number  
by pressing the Point ▲▼ buttons.  
After a correct Logo PIN code is entered, the  
following dialog box appears.  
Repeat this step to complete entering a four-digit  
number.  
After entering the four-digit number, move the  
pointer to "Set" by pressing the Point button.  
Press the SELECT button so that you can change  
the Logo PIN code lock setting.  
Select On/Off by pressing the Point◄►  
buttons or change the Logo PIN code.  
If you entered an incorrect Logo PIN code, "Logo  
PIN code" and the number () turns red.  
Enter a Logo PIN code all over again.  
To Change the Logo PIN code  
Logo PIN code can be changed to your desired  
four-digit number. Select "Logo PIN code change"  
with the Point button and press the SELECT  
button. Set a new Logo PIN code.  
Be sure to note the new Logo PIN code and keep it  
at hand. If you lost the number, you could no longer  
change the Logo PIN code setting. For details on  
PIN code setting, refer to relevant instructions of the  
PIN code lock function on pages 48 and 49.  
CAUTION:  
WHEN YOU HAVE CHANGED THE LOGO PIN  
CODE, WRITE DOWN THE NEW PIN CODE  
IN COLUMN OF THE LOGO PIN CODE NO.  
MEMO ON PAGE 65, AND KEEP IT SECURELY.  
SHOULD THE LOGO PIN CODE BE LOST OR  
FORGOTTEN, THE LOGO PIN CODE SETTING  
CAN NO LONGER BE CHANGED.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting  
Ceiling  
Ceiling  
When this function is "On", the picture is top/bottom  
and left/right reversed. This function is used to project  
the image from a ceiling mounting the projector.  
Rear  
When this function is "On", the picture is left/right  
reversed. This function is used to project the image to  
a rear projection screen.  
Rear  
Terminal  
The COMPUTER IN ꢀ/MONITOR OUT terminal on the  
back of the projector is switchable for computer input  
or monitor output. (See page 9) Select Computer ꢀ or  
Monitor out with the Point ◄► buttons.  
Computer ꢀ......computer input  
Monitor out.......monitor output  
Terminal function is not available when selecting  
Computer ꢀ to the input source. Change the input  
source to the others (Computer 1 or Video) so that the  
Terminal function will be available.(p.ꢀ5, 34, 35)  
Input search  
This function detects the input signal automatically.  
When finding a signal, the search will stop. Use the  
Point ◄► buttons to select one of the following.  
Off. . . . . Input search does not work.  
On1. . . . Input search works when pressing the  
COMPUTER button or VIDEO button on the  
remote control.  
Onꢀ. . . . Input search works under the situation  
below.  
When turning on the projector with  
pressing the POWER ON/STAND-BY  
button on the remote control.  
• When pressing the COMPUTER button or  
VIDEO button on the remote control.  
• When missing the current input signal. *  
*If the No show or Freeze function is active, cancel it  
to activate the Input search. It is also unavailable when  
On-Screen menu is displayed.  
Note:  
• While Input search is set On1 or Onꢀ, the status of Input and Lamp are displayed every time the  
signal is switched.  
• Only the input source selected at the last time can be detected.  
• If any of the COMPUTER button or VIDEO button on the remote control is pressed while Input  
search is on, Input search will stop and go back to the previous input signal.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting  
Power management  
Power management  
For reducing power consumption as well as  
maintaining the lamp life, the Power management  
function turns off the projection lamp when the  
projector is not used for a certain period.  
When the input signal is interrupted and no button is  
pressed for more than 30 seconds, the timer display  
with "No signal" appears. The countdown starts to turn  
off the lamp.  
Time left before Lamp is off.  
Select one of the operations:  
Ready. . . . . . . . When the lamp has been fully  
cooled down, the POWER indicator  
changes to green blinking. In  
this condition, the projection lamp  
is turned on if the input signal is  
reconnected or any button on the  
remote control is pressed.  
Shut down . . . . When the lamp has been fully  
cooled down, the power is turned  
off.  
Press the SELECT button  
at Power management  
and this box appears.  
Choose one of three  
settings with the Point◄  
►buttons, and go to the  
timer with the Point ▲▼  
buttons and set time with  
the Point ◄►buttons.  
Off . . . . . . . . . . Power management function is off.  
Then set the countdown timer with the Point ◄►  
buttons.  
Note:  
Factory default is “Ready: 5 min.”  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting  
On start  
On start  
When this function is "On", the projector is  
automatically turned on just by connecting the AC  
power cord to a wall outlet.  
Note:  
Be sure to turn the projector off properly (see  
"Turning Off the Projector" on page 19). If the  
projector is turned off in the incorrect sequence,  
the On start function does not operate properly.  
Lamp control  
This function allows you to change brightness of the  
screen.  
High.........Brighter than the Normal mode.  
Normal.....Normal brightness.  
Auto.........Brightness according with the input signal.  
Remote control  
This projector provides two different remote control  
codes: the factory-set initial code (Code 1) and the  
secondary code (Code ꢀ). This switching function  
prevents remote control interference when operating  
several projectors or video equipment at the same  
time.  
When operating the projector in "Code ꢀ", both the  
projector and the remote control must be switched to  
"Code ꢀ".  
Remote control  
Press and hold  
MENU and  
IMAGE buttons  
for more than 5  
seconds.  
To change the code for the projector:  
Select either "Code 1" or "Code ꢀ" in this Setting Menu.  
To change the code for the remote control:  
Press and hold both the MENU and IMAGE buttons  
together for 5 seconds or more. After changing the  
code, make sure the remote control operates properly.  
Note:  
If the batteries are removed from the remote  
control for a long period of time, the remote control  
code will be reset.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting  
Security (PIN code lock setting)  
This function allows you to use PIN code lock function  
to set the security for the projector operation.  
PIN code lock  
PIN code lock  
This function prevents the projector from being  
operated by an unauthorized person and provides  
the following settings for security options.  
Off . . . . . the projector is not locked with a  
PIN code.  
On1 . . . . require to enter a PIN code every time  
turning on the projector.  
Onꢀ . . . . require to enter a PIN code to operate  
the projector once the power cord  
is disconnected; as long as the AC  
power cord is connected, the projector  
can be operated without a PIN code.  
When the projector is locked  
with the PIN code, the PIN  
code lock mark appears on the  
menu bar.  
Whenever to change the PIN code lock setting  
or the PIN code (the four-digit number), you are  
required to enter the PIN code. The "1ꢀ34" is set as  
the initial PIN code at the factory.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting  
Enter a PIN code  
To Enter the PIN code  
Select a number by pressing the Point ▲▼ buttons.  
And then press the Point button to fix the number  
and move the pointer. The number changes to "".  
If you fixed an incorrect number, move the pointer  
to the number you want to correct by pressing the  
Point button, and then select the correct number  
by pressing the Point ▲▼ buttons.  
Repeat this step to complete entering a four-digit  
number.  
After entering the four-digit number, move the  
pointer to "Set" by pressing the Point button.  
Press the SELECT button so that you can change  
the following PIN code lock settings.  
The input numbers change  
to "" for security.  
If you entered an incorrect PIN code, "PIN code"  
and the number () turns red. Enter a PIN  
code all over again.  
To Change the PIN code lock setting  
Select Off, On1, or Onꢀ with the Point ◄► buttons  
and then move the red framed pointer to "Quit" with  
the Point button. Press the SELECT button to  
close the dialog box.  
Move the pointer to "Set" by pressing  
the Point button. And then press  
the SELECT button.  
To Change the PIN code  
Change the PIN code lock setting  
The PIN code can be changed to your desired four-  
digit number.  
Select "PIN code change" with the Point button,  
and press the SELECT button to display the New  
PIN code input dialog box.  
Select a desired setting with  
the Point ◄► buttons.  
Select a number by pressing the Point ▲▼ buttons.  
And then press the Point button to fix the number  
and move the pointer. Repeat it to complete  
entering a four-digit number. After entering the four-  
digit number, move the pointer to "Set" by pressing  
the Point button. Then press the SELECT button.  
Change the PIN code  
CAUTION:  
Select PIN code change and  
press the SELECT button.  
The New PIN code input  
dialog box appears.  
WHEN YOU HAVE CHANGED THE PIN CODE,  
WRITE DOWN THE NEW PIN CODE IN COLUMN  
OF THE PIN CODE NO. MEMO ON PAGE 65, AND  
KEEP IT SECURELY. IF YOU FORGET YOUR PIN  
CODE, THE PROjECTOR CAN NO LONGER BE  
STARTED.  
The input numbers are being  
displayed for confirmation.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting  
Fan  
This function provides the following alternatives in the  
cooling fans' operation after turning off the projector.  
(p.19)  
L1. . . . . . normal operation  
L. . . . . . slower and lower-sound than the normal  
operation (L1), but it takes longer to cool  
the projector down.  
Lamp counter  
This function is used to reset the lamp replacement  
counter. When replacing the projection lamp, reset the  
lamp replacement counter by using this function. See  
page 55 for operation.  
Factory default  
Factory default  
This function returns all setting values except for the  
user logo, PIN code lock, Logo PIN code lock, and the  
lamp counter to the factory default settings.  
Select Factory default  
and this box appears.  
Select [Yes], and the  
next box appears.  
Quit  
Exit the Setting Menu.  
Select [Yes] to  
activate it.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and Cleaning  
Warning Indicator  
The WARNING indicator shows the state of the function which protects the projector. Check the  
state of the WARNING indicator and the POWER indicator to take proper maintenance.  
The projector is shut down and the WARNING  
indicator is blinking red.  
Top Panel  
When the temperature inside the projector reaches a  
certain level, the projector is automatically shut down  
to protect the inside of the projector. The POWER  
indicator is blinking while the projector is being cooled  
down. When the projector has cooled down sufficiently  
(to its normal operating temperature), it can be turned  
on again by pressing the POWER ON/STAND-BY  
button on the remote control.  
WARNING  
blinking red  
Note:  
The WARNING indicator continues to blink even  
after the temperature inside the projector returns  
to normal. When the projector is turned on again,  
the WARNING indicator stops blinking.  
Then check the matters below:  
– Did you provide appropriate space for the projector  
to be ventilated? Check the installing condition to  
see if ventilation slots are not blocked.  
– Has the projector been installed near the Air-  
Conditioning/Heating Duct or Vent? Move the  
installation of the projector away from the duct or  
vent.  
– Are the air filters clean? Clean the air filters  
periodically. (p.5ꢀ)  
The projector is shut down and the WARNING  
indicator emits a red light.  
Top Panel  
When the projector detects an abnormal condition, it  
is automatically shut down to protect the inside of the  
porjector and the WARNING indicator becomes red. In  
this case, disconnect the AC power cord and reconnect  
it, and then turn the projector on once again to verify  
operation. If the projector cannot be turned on and the  
WARNING indicator emits a red light, disconnect the  
AC power cord and contact the service station.  
WARNING  
emit red light  
CAUTION  
DO NOT LEAVE THE PROJECTOR WITH THE  
AC POWER CORD CONNECTED UNDER THE  
ABNORMAL CONDITION. IT MAY RESULT IN  
FIRE OR ELECTRIC SHOCK.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Maintenance and Cleaning  
Cleaning the Air Filters  
Air filters prevent dust from accumulating on the optical elements inside the projector. Should the air  
filters become clogged with dust particles, it will reduce cooling fans' effectiveness and may result in  
internal heat build up and adversely affect the life of the projector. Clean the air filters following the  
steps below.  
Turn off the projector, and disconnect the AC power  
cord from the AC outlet.  
1
Turn over the projector and remove the air filters by  
pulling the latches upward.  
2
Clean the air filters with a brush or rinse them  
softly.  
3
When cleaning the air filters by rinsing, dry them  
well. Replace the air filters properly. Make sure  
that the air filters are fully inserted.  
4
CAUTION  
Air filters  
Pull up and remove.  
Do not operate the projector with the air filters  
removed. Dust may accumulate on the optical  
elements degrading picture quality.  
Note:  
Be sure to reinsert the air filters in  
the proper direction.  
Do not put small parts into the air intake vents. It  
may result in malfunction of the projector.  
RECOMMENDATION  
We recommend avoiding dusty/smoky environments  
when operating the projector. Usage in these  
environments may cause a poor image quality.  
When using the projector under dusty or smoky  
conditions, dust may accumulate on a lens, LCD  
panels, or optical elements inside the projector. This  
condition may degrade the quality of a projected  
image. When the symptoms above are noticed,  
contact your authorized dealer or service station for  
proper cleaning.  
Lens Cap  
Attaching the Lens Cap  
When moving this projector or while not using it over  
an extended period of time, replace the lens cap.  
Attach the lens cap according to the following  
procedures.  
Pass the string through a hole of the lens cap.  
1
String for the  
lens cap  
Secure it to  
the hole with a  
screw.  
Turn over the projector and remove the screw  
with a screwdriver.  
2
Attach the string with lens cap to a hole at the  
bottom of the projector and secure it with a screw.  
3
Hole  
5ꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Maintenance and Cleaning  
Cleaning the Projection Lens  
Disconnect the AC power cord before cleaning.  
Gently wipe the projection lens with a cleaning  
cloth that contains a small amount of non-abrasive  
camera lens cleaner, or use lens cleaning paper or a  
commercially available air blower to clean the lens.  
Avoid using an excessive amount of cleaner. Abrasive  
cleaners, solvents, or other harsh chemicals might  
scratch the surface.  
Cleaning the Projector Cabinet  
Disconnect the AC power cord before cleaning.  
Gently wipe the projector body with a soft, dry cleaning  
cloth. When it is heavily soiled, use a small amount of  
mild detergent and finish with a soft, dry cleaning cloth.  
Avoid using an excessive amount of cleaner. Abrasive  
cleaners, solvents, or other harsh chemicals might  
scratch the surface.  
When the projector is not in use, put the projector in  
an appropriate carrying case to protect it from dust and  
scratches.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Maintenance and Cleaning  
Lamp Replacement  
When the life of the projection lamp of this projector  
draws to an end, the LAMP REPLACE indicator emits  
a yellow light. If this indicator lights yellow, replace the  
lamp with a new one promptly.  
Top Panel  
T h i s i n d i c a t o r i s  
yellow when the life  
of the projection lamp  
draws to an end.  
WARNING:  
TURN OFF THE UV LAMP BEFORE  
OPENING THE LAMP COVER  
CAUTION  
CAUTION  
Allow a projector to cool, for at least 45  
minutes before you open the Lamp cover.  
The inside of the projector can become very  
hot.  
For continued safety, replace with a lamp of  
the same type. Do not drop a lamp or touch  
a glass bulb! The glass can shatter and  
may cause injury.  
Follow these steps to replace the lamp.  
Screw  
Lamp Cover  
Turn off the projector and disconnect the AC power  
cord. Allow the projector to cool for at least 45  
minutes.  
1
Loosen the screw with a screwdriver, and remove  
the lamp cover.  
2
Loosen the 3 screws of the lamp with a screwdriver  
and lift the lamp out of the projector by using the  
built in handles.  
3
Screw  
Replace the lamp with a new one and secure it  
4
Screw  
with the 3 screws. Make sure that the lamp is set  
properly. Replace the lamp cover and tighten the  
screw.  
Lamp  
Screw  
Connect the AC power cord to the projector and  
5
turn on the projector.  
Reset the lamp replacement counter.  
See "Lamp Replacement Counter" on the next  
page .  
6
Handles  
ORDER REPLACEMENT LAMP  
Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the  
following information to the dealer.  
Model No. of your projector:  
PLC-XE3ꢀ  
Replacement Lamp Type No.: POA-LMP107  
(Service Parts No. 610 330 4564)  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Maintenance and Cleaning  
Lamp Replacement Counter  
Be sure to reset the Lamp replacement counter after the lamp is replaced. When the Lamp  
replacement counter is reset, the LAMP REPLACE indicator stops lighting.  
Turn the projector on, press the MENU button to  
1
display the On-Screen Menu. Press the Point ◄  
buttons to move the red framed pointer to the  
Setting Menu icon.  
Press the Point ▲▼ buttons to move the red  
framed pointer to the Lamp counter function and  
then press the SELECT button. A dialog box  
appears showing the total accumulated lamp hours  
and reset option. If you select "Reset", a "Lamp  
replacement counter Reset?" message appears.  
Select [Yes] to continue.  
2
To reset the lamp counter,  
move the pointer to  
Reset and then press the  
SELECT button. “Lamp  
replacement counter  
Reset?” dialog box is  
displayed.  
Another confirmation dialog box appears, select  
[Yes] to reset the Lamp replacement counter.  
3
Select [Yes],  
then another  
confirmation  
box appears.  
Note:  
Do not reset the Lamp replacement counter  
without implementing lamp replacement. Be sure  
to reset the Lamp replacement counter only after  
replacing the lamp.  
Select [Yes] again  
to reset the lamp  
counter.  
LAMP HANDLING PRECAUTIONS  
This projector uses a high-pressure lamp which must be handled carefully and properly.  
Improper handling may result in accidents, injury, or create a fire hazard.  
● Lamp life may differ from lamp to lamp and according to the environment of use. There is no guarantee  
of the same life for each lamp. Some lamps may fail or terminate their life in a shorter period of time than  
other similar lamps.  
● If the projector indicates that the lamp should be replaced, i.e., if the LAMP REPLACE indicator lights up,  
replace the lamp with a new one IMMEDIATELY after the projector has cooled down. (Follow carefully the  
instructions in the Lamp Replacement section of this manual.) Continuous use of the lamp with the LAMP  
REPLACE indicator lighted may increase the risk of lamp explosion.  
● A Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its lifetime  
draws to an end. Risk of explosion may differ according to the environment or conditions in which the  
projector and lamp are being used.  
IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE TAKEN.  
If a lamp explodes, disconnect the projector's AC plug from the AC outlet immediately. Contact an authorized  
service station for a checkup of the unit and replacement of the lamp. Additionally, check carefully to ensure  
that there are no broken shards or pieces of glass around the projector or coming out from the cooling air  
circulation holes. Any broken shards found should be cleaned up carefully. No one should check the inside of  
the projector except those who are authorized trained technicians and who are familiar with projector service.  
Inappropriate attempts to service the unit by anyone, especially those who are not appropriately trained to do  
so, may result in an accident or injury caused by pieces of broken glass.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix  
Troubleshooting  
Before calling your dealer or service center for assistance, check the items below once again.  
– Make sure you have properly connected the projector to peripheral equipment as described on  
pages15-17.  
– Make sure all equipment is connected to AC outlet and the power is turned on.  
– When you operate the projector with a computer and it does not project an image, restart the  
computer.  
Problem  
– Solutions  
No power  
– Plug the power cord of the projector into the AC outlet.  
– See if the POWER indicator lights red.  
– Wait until the POWER indicator stops blinking to turn on the  
projector again. The projector can be turned on after the  
POWER indicator turns red.(See page 19.)  
– Check the WARNING indicator. If the WARNING indicator  
lights red, the projector cannot be turned on. (See page 51.)  
– Check the projection lamp. (See page 54.)  
Image is out of focus  
– Adjust the focus of the projector. (See page ꢀꢀ.)  
– Provide proper distance between the projector and the  
projection screen. (See page 13.)  
– Check the projection lens to see if it needs cleaning. (See  
page 53.)  
– Moving the projector from a cool to warm place may result in  
moisture condensation on the projection lens. If this occurs,  
leave the projector off and wait until condensation evaporates.  
No image  
– Check the connection between your computer or video  
equipment and the projector. (See pages 15-17.)  
– See if the input signal is correctly output from your computer.  
For some laptop computers, you may need to change the  
setting for the monitor output when connecting to a projector.  
See your computer’s instruction manual for the setting.  
– It takes about 30 seconds to display an image after turning on  
the projector. See if the selected system is corresponding to  
your computer or video equipment. (See pages ꢀ6 and 36.)  
– Select a correct input source once again through menu  
operation. (See pages ꢀ5, 34 and 35.)  
– Make sure the temperature is not out of the specified  
operating temperature (41°F ~ 95°F (5°C ~ 35°C)).  
Image is Left/Right reversed  
Image is Top/Bottom reversed  
– Check the Ceiling/Rear function. (See page 45.)  
– Check the Ceiling function. (See page 45.)  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix  
No sound  
– Check audio cable connections from the audio input source.  
– Adjust the audio source.  
– Press the VOLUME + button. (See page ꢀ3.)  
– Press the MUTE button. (See page ꢀ3.)  
– Is the image projected? You will hear the sound only when the  
image is projected.  
Some displays are not seen  
during operations  
– Check the Display item. (See page 4ꢀ.)  
PIN code dialog box appears at  
the start-up  
– PIN code lock is being set. Input a PIN code (1ꢀ34 or numbers  
you have set). (See pages 18, 48, and 49.)  
The Remote Control does not  
work  
– Check the batteries.  
– Make sure there is no obstruction between the projector and  
remote control.  
– Make sure you are not too far from the projector when using  
the remote control. Maximum operating range is 16.4' (5 m).  
– Make sure the code of the remote control is conformed to that  
of the projector. (See page 47.)  
WARNING:  
High voltages are used to operate this projector. Do not attempt to open the cabinet.  
If problems still persist after following all operating instructions, contact the dealer where you  
purchased the projector or the service center. Specify the model number and explain about the  
problem. We will advise you how to obtain service.  
This symbol on the nameplate means  
the product is Listed by Underwriters  
Laboratories Inc. It is designed and  
manufactured to meet rigid U.L. safety  
The CE Mark is a Directive  
conformity mark of the  
European Community (EC).  
standards against risk of fire, casualty and  
electrical hazards.  
Pixelworks ICs used.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Menu Tree  
Computer Input/Video Input  
Computer 1  
Go to System (1)  
Go to System (ꢀ)  
Go to System (3)  
N/A  
Input  
RGB  
S-Video  
Component  
RGB (Scart)  
Quit  
N/A - - - not applicable  
Go to System (1)  
Go to System (ꢀ)  
Computer ꢀ  
Video  
Sound  
Volume  
0 - 63  
Sound  
Mute  
Quit  
On/Off  
Computer Input  
Mode 1  
Mode ꢀ  
SVGA 1  
- - - -  
Dynamic  
Standard  
Real  
System (1)  
Image Select  
Blackboard (Green)  
Image 1  
Systems displayed in the System Menu vary  
Image ꢀ  
depending on the input signal.  
Image 3  
Image 4  
Auto PC Adj.  
PC Adjust  
Fine sync.  
Total dots  
Horizontal  
0 - 31  
Contrast  
0 - 63  
0 - 63  
High  
Image Adjust  
Brightness  
Color temp.  
Vertical  
Mid  
Current mode  
H-sync freq.  
Low  
Clamp  
V-sync freq.  
Quit  
XLow  
Adj.  
Display area - H  
Display area - V  
Reset  
Red  
0 - 63  
0 - 63  
0 - 63  
0 - 15  
0 - 15  
Yes/No  
Image 1  
Image ꢀ  
Image 3  
Image 4  
Quit  
Green  
Blue  
Yes/No  
Mode 1  
Mode ꢀ  
Mode 3  
Mode 4  
Mode 5  
Quit  
Mode free  
Sharpness  
Gamma  
Reset  
Store  
Store  
Mode 1  
Mode ꢀ  
Mode 3  
Mode 4  
Mode 5  
Quit  
Quit  
Normal  
Screen  
True  
Quit  
Wide  
Full  
Digital zoom +  
Digital zoom –  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix  
Video Input  
System (2)  
Setting  
English  
Setting  
Auto  
Language  
German  
French  
PAL  
SECAM  
NTSC  
NTSC 4.43  
PAL-M  
PAL-N  
Italian  
Spanish  
Portuguese  
Dutch  
Swedish  
Finnish  
Polish  
Auto  
1080i  
1035i  
7ꢀ0p  
575p  
480p  
575i  
System (3)  
Hungarian  
Romanian  
Russian  
Chinese  
Korean  
Japanese  
Quit  
Keystone  
Blue back  
Display  
Logo  
480i  
Store/Reset  
On/Off  
On/Countdown off/Off  
Dynamic  
Image Select  
Logo select  
Standard  
Cinema  
Off  
Default  
Blackboard (Green)  
Image 1  
User  
Capture  
Yes/No  
Image ꢀ  
Logo PIN code lock  
Logo PIN code  
Off  
Image 3  
Image 4  
On  
Logo PIN code change  
Contrast  
0 - 63  
Image Adjust  
Brightness  
Quit  
Quit  
0 - 63  
0 - 63  
0 - 63  
High  
Mid  
Color  
Ceiling  
Rear  
On/Off  
Tint  
On/Off  
Color temp.  
Terminal  
Computer ꢀ/Monitor out  
On1/Onꢀ/Off  
Input search  
Power management  
Low  
Off  
XLow  
Adj.  
Ready  
Shut down  
Timer (1-30 Min.)  
Quit  
Red  
0 - 63  
0 - 63  
0 - 63  
0 - 15  
0 - 15  
Off  
Green  
Blue  
On start  
On/Off  
Sharpness  
Gamma  
Noise reduction  
Lamp control  
Remote control  
High/Normal/Auto  
Code 1/Code ꢀ  
Security  
PIN code lock  
PIN code lock  
Off  
L1  
Lꢀ  
On1  
Onꢀ  
Progressive  
Off  
L1  
PIN code change  
Quit  
Lꢀ  
Film  
Quit  
Reset  
Store  
Yes/No  
Image 1  
Image ꢀ  
Image 3  
Image 4  
Quit  
Fan  
L1/Lꢀ  
Hour(s)  
Reset  
Quit  
Lamp counter  
Factory default  
Quit  
Yes/No  
Quit  
Normal  
Wide  
Screen  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Indicators and Projector Condition  
Check the indicators for projector condition.  
Indicators  
LAMP  
REPLACE  
yellow  
Projector Condition  
POWER  
WARNING  
red  
red/green  
The projector is off. (The AC power cord is unplugged.)  
The projector is preparing for stand-by or the projection  
lamp is being cooled down. The projector cannot be  
turned on until cooling is completed.  
The projector is ready to be turned on with the POWER  
ON/STAND-BY button on the remote control.  
The projector is operating normally.  
The projector is in the Power management mode.  
The temperature inside the projector is abnormally high.  
The projector cannot be turned on. When the projector  
is cooled down enough and the temperature returns  
to normal, the POWER indicator lights red and the  
projector can be turned on. (The WARNING indicator  
keeps blinking.) Check and clean the air filters.  
The projector has been cooled down enough and the  
temperature returns to normal. When turning on the  
projector, the WARNING indicator stops blinking. Check  
and clean the air filters.  
The projector detects an abnormal condition and cannot  
be turned on. Unplug the AC power cord and plug it  
again to turn on the projector. If the projector is turned  
off again, disconnect the AC power cord and contact the  
dealer or the service center. Do not leave the projector  
on. It may cause an electric shock or fire hazard.  
• • • green  
• • • blinks green  
• • • red  
• • • blinks red  
• • • off  
When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow.  
When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the  
lamp replacement counter after replacing the lamp. See pages 54 and 55.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix  
Compatible Computer Specifications  
Basically this projector can accept the signal from all computers with the V, H-Frequency below  
mentioned and less than 140 MHz of Dot Clock.  
When selecting these modes, PC adjustment can be limited.  
ON-SCREEN  
DISPLAY  
H-Freq.  
(kHz)  
V-Freq.  
(Hz)  
ON-SCREEN  
DISPLAY  
H-Freq.  
(kHz)  
V-Freq.  
(Hz)  
RESOLUTION  
RESOLUTION  
VGA 1  
VGA ꢀ  
640 x 480  
7ꢀ0 x 400  
640 x 400  
640 x 480  
640 x 480  
640 x 480  
640 x 480  
640 x 480  
640 x 480  
––––––––  
––––––––  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
83ꢀ x 6ꢀ4  
10ꢀ4 x 768  
10ꢀ4 x 768  
10ꢀ4 x 768  
10ꢀ4 x 768  
10ꢀ4 x 768  
10ꢀ4 x 768  
10ꢀ4 x 768  
10ꢀ4 x 768  
10ꢀ4 x 768  
10ꢀ4 x 768  
10ꢀ4 x 768  
10ꢀ4 x 768  
10ꢀ4 x 768  
10ꢀ4 x 768  
10ꢀ4 x 768  
10ꢀ4 x 768  
31.47  
31.47  
31.47  
37.86  
37.86  
37.50  
43.ꢀ69  
34.97  
35.00  
15.734  
15.6ꢀ5  
35.156  
37.88  
46.875  
53.674  
48.08  
37.90  
34.50  
38.00  
38.60  
3ꢀ.70  
38.00  
49.7ꢀ  
48.36  
68.677  
60.0ꢀ3  
56.476  
60.31  
48.50  
44.00  
63.48  
36.00  
6ꢀ.04  
61.00  
35.5ꢀꢀ  
46.90  
47.00  
58.03  
60.ꢀ4  
59.88  
70.09  
70.09  
74.38  
7ꢀ.81  
75.00  
85.00  
66.60  
66.67  
SXGA 1  
SXGA ꢀ  
SXGA 3  
SXGA 4  
SXGA 5  
SXGA 6  
SXGA 7  
SXGA 8  
SXGA 9  
SXGA 10  
SXGA 11  
SXGA 1ꢀ  
SXGA 13  
SXGA 14  
SXGA 15  
SXGA 16  
SXGA 17  
SXGA 18  
SXGA 19  
SXGA ꢀ0  
SXGA+ 1  
SXGA+ ꢀ  
SXGA+ 3  
MACꢀ1  
MAC  
115ꢀ x 864  
1ꢀ80 x 10ꢀ4  
1ꢀ80 x 10ꢀ4  
1ꢀ80 x 10ꢀ4  
1ꢀ80 x 10ꢀ4  
1ꢀ80 x 10ꢀ4  
1ꢀ80 x 10ꢀ4  
1ꢀ80 x 10ꢀ4  
1ꢀ80 x 10ꢀ4  
1ꢀ80 x 960  
115ꢀ x 900  
115ꢀ x 900  
1ꢀ80 x 10ꢀ4  
1ꢀ80 x 10ꢀ4  
1ꢀ80 x 10ꢀ4  
1ꢀ80 x 10ꢀ4  
115ꢀ x 900  
1ꢀ80 x 10ꢀ4  
1ꢀ80 x 10ꢀ4  
1ꢀ80 x 10ꢀ4  
1400 x 1050  
1400 x 1050  
1400 x 1050  
115ꢀ x 870  
1ꢀ80 x 960  
1ꢀ80 x 10ꢀ4  
––––––––  
64.ꢀ0  
6ꢀ.50  
63.90  
63.34  
63.74  
71.69  
81.13  
63.98  
79.976  
60.00  
61.ꢀ0  
71.40  
50.00  
50.00  
63.37  
76.97  
61.85  
46.43  
63.79  
91.146  
63.970  
63.350  
65.1ꢀ0  
68.68  
75.00  
80.00  
31.47  
31.ꢀ5  
45.00  
33.75  
33.75  
ꢀ8.1ꢀ5  
48.36  
47.70  
48.36  
56.16  
47.776  
60.ꢀ89  
68.633  
75.00  
81.ꢀ5  
87.5  
70.40  
58.60  
60.00  
59.98  
60.01  
67.19  
76.107  
60.0ꢀ  
75.0ꢀ5  
60.00  
65.ꢀ0  
75.60  
VGA 3  
VGA 4  
VGA 5  
VGA 6  
VGA 7  
MAC LC13  
MAC 13  
480i  
60.00  
(Interlace)  
50.00  
(Interlace)  
575i  
SVGA 1  
SVGA ꢀ  
SVGA 3  
SVGA 4  
SVGA 5  
SVGA 6  
SVGA 7  
SVGA 8  
SVGA 9  
SVGA 10  
SVGA 11  
MAC 16  
XGA 1  
56.ꢀ5  
60.3ꢀ  
75.00  
85.06  
7ꢀ.19  
61.03  
55.38  
60.51  
60.31  
51.09  
60.51  
74.55  
60.00  
84.997  
75.03  
70.07  
74.9ꢀ  
60.0ꢀ  
54.58  
79.35  
86.00  
(Interlace)  
94.00  
(Interlace)  
60.01  
7ꢀ.00  
66.00  
86.70  
(Interlace)  
60.18  
85.0ꢀ4  
60.190  
60.1ꢀ0  
59.900  
75.06  
75.08  
75.08  
59.88  
50.00  
60.00  
XGA ꢀ  
XGA 3  
MAC  
XGA 4  
480p  
XGA 5  
575p  
––––––––  
XGA 6  
7ꢀ0p  
––––––––  
60.00  
(Interlace)  
XGA 7  
1035i  
––––––––  
60.00  
(Interlace)  
XGA 8  
1080i  
––––––––  
87.17  
(Interlace)  
50.00  
(Interlace)  
XGA 9  
1080i  
––––––––  
XGA 10  
XGA 11  
XGA 1ꢀ  
XGA 13  
XGA 14  
XGA 15  
MAC 19  
77.07  
75.70  
86.96  
(Interlace)  
WXGA 1  
WXGA ꢀ  
WXGA 3  
WXGA 4  
WXGA 6  
WXGA 7  
WXGA 8  
UXGA 1  
UXGA ꢀ  
UXGA 3  
UXGA 4  
1366 x 768  
1360 x 768  
1376 x 768  
1360 x 768  
1ꢀ80 x 768  
1ꢀ80 x 768  
1ꢀ80 x 768  
1600 x 1ꢀ00  
1600 x 1ꢀ00  
1600 x 1ꢀ00  
1600 x 1ꢀ00  
60.00  
60.00  
60.00  
7ꢀ.00  
59.870  
74.893  
84.837  
60.00  
65.00  
70.00  
75.00  
58.ꢀ0  
58.30  
7ꢀ.00  
75.08  
93.75  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix  
Technical Specifications  
Mechanical Information  
Projector Type  
Multi-media Projector  
(Not including adjustable foot)  
Dimensions (W x H x D)  
Net Weight  
1ꢀ.99" x 3.15" x 9.33" (330 mm x 80 mm x ꢀ37 mm)  
6.4 lbs (ꢀ.9 kg)  
Foot Adjustment  
0˚ to 10.0˚  
Panel Resolution  
LCD Panel System  
Panel Resolution  
Number of Pixels  
0.6" TFT Active Matrix type, 3 panels  
1,0ꢀ4 x 768 dots  
ꢀ,359,ꢀ96 (1,0ꢀ4 x 768 x 3 panels)  
Signal Compatibility  
Color System  
PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N  
480i, 480p, 575i, 575p, 7ꢀ0p, 1035i, and 1080i  
H-sync. 15 ~ 100 kHz, V-sync. 50 ~ 100 Hz  
High Definition TV Signal  
Scanning Frequency  
Optical Information  
Projection Image Size (Diagonal)  
Projection Lens  
Adjustable from 40" to 300"  
F 1.65 ~ 1.81 lens with f ꢀꢀ.5 mm ~ ꢀ7 mm with manual zoom and focus  
Throw Distance  
4.6' - 43.3' (1.4m - 13.ꢀm)  
ꢀ00W  
Projection Lamp  
Interface  
Video Input Jack  
RCA Type x 1  
Audio Input Jacks  
RCA Type x ꢀ  
Computer Input/S-VIDEO  
/Component Input Terminal  
Monitor Output Terminal  
Component/ Computer Audio Input Jack  
Service Port Connector  
Audio Output Jack  
Analog RGB (Mini D-sub 15 pin) Terminal x 1  
Analog RGB (Mini D-sub 15 pin) Terminal x 1  
Mini Jack (stereo) x 1  
Mini DIN 8 pin x 1  
Mini Jack (stereo) x 1 (Variable)  
Audio  
Internal Audio Amp  
1.0 W RMS  
Built-in Speaker  
1 speaker, ø1.1" (ꢀ8 mm)  
Power  
Voltage and Power Consumption  
AC 100 ~ 1ꢀ0 V (3.ꢀA Max. Ampere), 50/60 Hz (The U.S.A and Canada)  
AC ꢀ00 ~ ꢀ40 V (1.6A Max. Ampere), 50/60 Hz (Continental Europe and The U.K.)  
Operating Environment  
Operating Temperature  
Storage Temperature  
41˚F ~ 95˚F (5˚C ~ 35˚C)  
14˚F ~ 140˚F (-10˚C ~ 60˚C)  
Remote Control  
Battery  
AA or LR6 1.5 V ALKALINE TYPE x ꢀ  
16.4' (5 m)/±30˚  
Operating Range  
Dimensions  
1.9" (W) x 0.87" (H) x 5.7" (D) (49 mm x ꢀꢀ mm x 145.3 mm)  
3.53 oz (100 g) (including batteries)  
Net Weight  
6ꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix  
Accessories  
Owner's Manual (CD-ROM)  
Quick Reference Guide  
AC Power Cord  
Remote Control and Batteries  
VGA Cable  
PIN Code Label  
Lens Cap with string  
Lamp replacement Label  
The specifications are subject to change without notice.  
LCD panels are manufactured to the highest possible standards. Even though 99.99% of  
the pixels are effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the  
characteristics of the LCD panels.  
Optional Parts  
The parts listed below are optionally available. When ordering those parts, specify the item and  
Model No. to the sales dealer.  
Model No.  
S-VIDEO-VGA Cable  
COMPONENT-VGA Cable  
SCART-VGA Cable  
: POA-CA-VGAS  
: POA-CA-COMPVGA  
: POA-CA-SCART  
: POA-RCKIT03  
Laser Pointer Remote Control  
Presentation Kit  
: POA-RCKIT04  
Soft Carrying Case  
: POA-CAC-VCLꢀ  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix  
Configurations of Terminals  
COMPUTER IN/S-VIDEO IN/COMPONENT IN/MONITOR OUT TERMINAL (ANALOG)  
Terminal : Analog RGB (Mini D-sub 15 pin)  
1
2
3
4
5
6
7
8
Red (R/Cr/SC) Input/Output  
9
5V Power  
5
4
3
2
1
10  
9
8
7
6
Green (G/Y/SY) Input/Output 10 Ground (Vert.sync.)  
Blue (B/Cb) Input/Output 11 Ground  
15  
12  
11  
14  
13  
-----  
Ground (Horiz.sync.)  
Ground (Red)  
1ꢀ DDC Data  
Horiz. sync. Input/Output (Composite H/V sync.)  
13  
14 Vert. sync.  
15 DDC Clock  
Ground (Green)  
Ground (Blue)  
SERVICE PORT CONNECTOR  
Terminal: Mini DIN 8-PIN  
Serial  
1
2
3
4
5
6
7
8
R X D  
-----  
-----  
GND  
RTS/CTS  
T X D  
GND  
GND  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix  
PIN Code Number Memo  
Write down the PIN code number in the column below and keep it with this manual securely. If you  
forgot or lost the number and unable to operate the projector, contact the service station.  
PIN Code Lock No.  
Factory default set No: 1 ꢀ 3 4*  
Logo PIN Code Lock No.  
Factory default set No: 4 3 ꢀ 1*  
* Should the four-digit number be  
changed, the factory set number  
will be invalid.  
While the projector is locked with the PIN code....  
Put the label below (supplied) on in a prominent place of  
the projector's body while it is locked with a PIN code.  
Lamp Replacement Label  
When using the projector ceiling-mounted, put the Lamp  
replacement label (supplied) on in a prominent place of  
the projector's body to check the Replacement Lamp  
Type Number.  
Lamp Replacement Label  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Dimensions  
SANYO Electric Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LE7AC  
 

Radio Shack Answering Machine TAD 1009 User Guide
RCA Flat Panel Television LED42A55R120Q User Guide
Reebok Fitness Home Gym RBEX29763 User Guide
Renesas Network Card M30100T3 RPD E User Guide
Rinnai Electric Heater RCE 329A User Guide
Rinnai Water Heater R50LSI User Guide
Samsung Car Video System 650FP User Guide
Samsung Clothes Dryer DV435ETGJRA User Guide
Samsung Photo Printer SPP 2040 User Guide
Sanyo CRT Television DS24425 User Guide