AS
Model Nos:
HT27745
No. de Modelo: HT28745
No de modèle :
Owner’s Manual
ENGLISH
Table of Contents . . . . 3
Manual de Instrucciónes
ESPAÑOL
Contenido . . . . . . . . . . 25
DOLL
B
Y
BY
D
I
G
I
T
A
L
CH
VOL
OW
PO
R
ER
WE
Manuel d’instructions
FRANÇAIS
HT28745
Table des matières . . 49
CH
VOL
POWER
DOO
LBBY
Y
D
I
G
I
T
A
L
INTEG
RATEIGIT
AL
TUNER
HT27745
As Real
As It Gets!
“Read this manual before assembling (or using) this product.”
R
Need assistance?
MediaStack-ATSC
the DTV software embedded in
this product copyright (c) 2004
by Zentek Technology, Inc.
All rights reserved.
Visit our website at www.sanyoctv.com
or Call toll free 1.800.877.5032
We can Help!
Importado Por : Comercializadora México
Printed in U.S.A. SMC, March 2005
ENERGY STAR
Americana, S. DE R.L. DE C.V.
Impreso en U.S.A. SMC, Marzo 2005
Imprimé aux é.-U. SMC, mars 2005
Nextengo No 78
®
“As an ENERGY STAR Partner, Sanyo
Col. Santa Cruz Acayucan
Del. Azcapotzalco, México D.F. C.P. 02770
RFC CMA 9109119L0
Part No. / No. de Parte /
Manufacturing Corporation has determined
o
N
de pièce : 1AA6P1P4785 ––
®
that this product meets the ENERGY STAR
guidelines for energy efficiency.”
Service Code / Código de Servicio /
Code de service : 610 319 9245
Telefono: 55-5328-3500
Download from Www.Somanuals.com. All Manuals Search And Download.
TO THE OWNER
Welcome to the World of Sanyo
those features and maintain it in good condition for many years
to come.
Thank you for purchasing this Sanyo High-Definition Digital
Television. You made an excellent choice for Performance,
Reliability, Features, Value, and Styling.
If your DTV seems to operate improperly, read this manual
again, check operations and cable connections and try the
solutions in the “Helpful Hints” section, page 22 of this
manual. If the problem still persists, visit our website at
Important Information
Before installing and operating this DTV, read this manual
thoroughly. This DTV provides many convenient features and
functions. Operating the DTV properly enables you to manage
CONTENTS
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . 2
To the Owner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
First-Things-First (Required Initial Setup) . . . . . . . . . . . . . . . . 5
Digital (DTV) Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . 5
Analog (RF) Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . . 5
Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Channel Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Auto Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Antenna Selection (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
DTV Back—Jacks Locations & Functions . . . . . . . . . . . . . . . . . 7
Glossary of Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Choose Your Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Digital A/V Connections
Antenna Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Channel Scan Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Initial Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Closed-Captioning Options:
Changing the Look of Digital Captioning
On-Screen Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
To View Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
V-Guide (Parental Control) Options:
To Block Movies or TV Programs . . . . . . . . . . . . . . . . . . . . 18
To Temporarily Unblock Movies or TV Programs . . . . . . . . . . 18
To Unblock Movies or TV Programs . . . . . . . . . . . . . . . . . . 18
TV Ratings (Age and Content-Based)
Symbol Explanation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
MPAA Movie Ratings (Age-Based)
Symbol Explanation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Using the Component Jacks to connect a DVD Player
Setup Menu Options:
or Other Digital Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Connecting Digital Audio Out Jacks to a Multi-Channel Receiver . . 9
Auto Date/Time Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Manual Date/ Time Setting . . . . . . . . . . . . . . . . . . . . . . . . . 19
Digital Audio Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
DTV Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Analog A/V Connections
Using the Analog Video Jacks to connect a VCR
(or Other Analog Device) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connecting Analog Audio Out Jacks to a
Picture/Sound Adjustment Options:
Stereo Amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Using the Remote Control . . . . . . . . . . . . . . . . . . . . . . . 11 ~ 12
DTV Adjustment and Setup
Preset Picture and Sound Options . . . . . . . . . . . . . . . . . . . . 20
Manual Picture and Sound Adjustment . . . . . . . . . . . . . . . . 21
Color Enhancer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Scan Velocity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Helpful Hints (Problems/Solutions) . . . . . . . . . . . . . . . . . . . . 22
Warranty (Mexico) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Warranty (U.S.A. and Canada) . . . . . . . . . . . . . . . . . . . . . . . 24
Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
How to Operate the On-Screen Menu . . . . . . . . . . . . . . . . . . . . . 13
Menu Navigation Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Channel Setup Options:
Channel Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Digital Cable Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Digital Add-On Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
N 27” / 28” High-Definition Digital True Flat-screens
N Trilingual Menu Options (English, French, or Spanish)
N Built-in Digital and Analog Tuners
N Receivable Formats: Digital Tuner for ATSC terrestrial broadcasts
and nonscrambled (ClearQAM) cable programs.
NTSC analog tuner for VHF/UHF or CATV
N Audio Format: Dolby®Digital for DTV and Analog for NTSC
N Channel Scan Memory
N Automatic Channel Search
N Auto Shut Off (no signal received after 15 minutes)
N 3-Line Digital Comb Filter (for better picture detail)
N Adjustable Scan Velocity Modulation
N Color Enhancer
N Auto Flesh Tone
N Receives 181 Analog Channels [VHF 2~13 and
UHF 14~69; Cable DTV 1, 14~125]; and
99 Digital Channels
N V-Chip for Movies and TV guidelines rating limits (parental control)
N Closed-Captioning: Analog EIA-608B
N RF Antenna Input Jacks: Digital and Analog
N Component Video Input (Two Sets)
N Rear AV Input (Two Sets)
N S-Video Input (Two Sets)
N Optical Digital Audio Out
N Audio Out fixed
Digital EIA-708B
N Audio Modes: DTV—Main and Sub
NTSC—Stereo, Mono, and SAP
N Front Surround Sound
N Bass / Treble Sound
N Front speakers 6 x 12 cm (two)
N Factory preset adjustments for picture/sound
N Clock (auto clock)
N XDS (Extended Data Services) displays station call letters,
Title of show, and ratings when broadcast
N Picture Shape: Letter box (HT27745 only), Zoom, Normal, and
Full (HT28745 only)
N Sleep Timer (3 hours)
N 32-Key Remote Control
N Initial Channel (automatic selection)
SPECIFICATIONS
Picture Tube Size (Measured Diagonally):
Size and Weight (approximately):
HT27745—27”
HT27745- 27”
True-Flat Screen Integrated HDTV
Horizontal Dim. (Width): 30.3 in. (770mm)
HT28745- 28”
True-Flat Wide Screen Integrated HDTV
Vertical Dim. (Height):
23.0 in. (585mm)
Scanning Format:
RF Antenna Input:
1080i [All Signals are Converted to 1080i]
Depth Dim. (Thickness): 19.5 in. (496mm)
Analog–UHF/VHF/CATV 75 ohm
Digital–75 ohm
Weight:
103.5 (lbs.), 47.0 (Kg)
HT28745—28”
No Signal Reception:
When tuned to an Analog Channel, and no
Horizontal Dim. (Width): 33.8 in. (858mm)
Vertical Dim. (Height): 21.4 in. (543mm)
Depth Dim. (Thickness): 21.2 in. (537mm)
Weight: 92.3 (lbs.), 41.9 (Kg)
signal is present for more than 15 minutes, the DTV automatically
switches OFF. In Video Modes, DTV will NOT switch off automatically.
Power Requirement:
Power Consumption:
Sound:
Source: AC 120V, 60Hz
140 Watts (Average)
Two Speakers, size: 6 x 12cm
Built-in with 5.0W/ch
Specifications are subject to change without notice.
Amplifier:
CAUTION: FCC Regulations state that improper modifications or un-
authorized changes to this unit may void the user’s authority
to operate the unit.
Jacks / Connectors:
Video 1 Input:
Video 2 Input:
S-Video1, Video and Audio L/R
S-Video2, Video and Audio L/R
Trademarks Information:
Manufactured under license from Dolby Laboratories. Dolby and
the double-D symbol are trademarks of Dolby Laboratories.
Compo 2 Input:
Component (Y/Pb/Pr), with
shared Video 2 Audio L/R Input
Compo 3 Input:
Component (Y/Pb/Pr), and
Audio 3 L/R Input
This symbol on the nameplate means the product is
Listed by Underwriters’ Laboratories Inc. It is
designed and manufactured to meet rigid U.L.
safety standards against risk of fire, casualty and
electrical hazards.
Digital Audio Output:
Analog Audio Output:
Dolby Digital (Optical)
Audio L/R
Service Input Terminal: For Technical use only (Phone jack)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
FIRST-THINGS-FIRST
This new high-definition digital television is capable of reproducing a crystal clear picture and exceptional
sound. The signal makes the difference!
INITIAL SIGNAL CONNECTIONS
1
Digital (DTV) Antenna Connection
RF
Antenna
Connect an RF antenna to the Digital Antenna In
terminal.
•
DTV Back
The digital tuner in this DTV receives HD signals
from an antenna. Digital signals from a STB are
received through a STB via the Component In jacks.
DIGITAL
ANTENNA IN
This DTV can receive and display ANY resolution
being broadcast (HDTV, EDTV, or SDTV).
Analog RF Antenna Connection
Connect a Cable signal (with or without a cable
box), Satellite Receiver, or RF antenna to the
Analog RF input.
•
NOTES: If you do not have a VCR connect signal directly
to DTV 75 (UHF/VHF/CATV) ohm terminal.
The only resolution available with any of these
connections, regardless of the original content, is
standard analog (SDTV).
The analog tuner in this DTV receives Analog
Antenna signals, Analog Cable signals, or the RF
output from a Satellite Receiver, VCR, or cable box.
Analog Cable
CATV IN
CH3
CH4
VIDEO
VIDEO
L- AUDIO-R
L- AUDIO-R
IN FROM
SAT.
OUT TO TV
S-VIDEO
RF
Antenna
Analog Satellite
Receiver
OR
OR
VCR Back
IN
FROM ANT.
OUT
OUT TO TV
IN
IN
VCR Back
FROM ANT.
FROM ANT.
VCR Back
OUT
OUT TO TV
OUT
OUT TO TV
CATV FRANCHISE NOTE: Cable
companies, like public utilities,
are franchised by local govern-
ment authorities. To receive
cable programs, even with
equipment which is capable of
receiving cable channels, the
consumer must subscribe to
the cable company’s service.
TV Back
TV Back
TV Back
UHF/VHF/CATV
UHF/VHF/CATV
UHF/VHF/CATV
(Continued on next page.)
I
I
I
Exception—When the Video mode is selected, the DTV will not auto-
matically switch off when signal reception has stopped for 15 minutes.
DTV will select the correct Antenna mode for the type of Analog RF
signal connected automatically.
I
If you move the DTV to a new location, press the RESET key twice
after connecting the signal and turning on the DTV.
Use “Antenna Selection” in the Setup menu to change the Antenna
Mode.
DTV will switch off automatically after 15 minutes if there is no
signal reception (cable out or station not broadcasting).
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANNEL SEARCH
INSTALL TWO “AAA” BATTERIES
3
When the television is powered on
Install two “AAA” Batteries
(not included) so that the
“+” and “–” marks on the
batteries match the “+”
and “–” marks inside
the Remote.
•
2
for the first time, it automatically
checks for the presence of an RF
signal.
Press the POWER key to turn
on the DTV.
•
•
To review the Remote
functions, go to
Pages 11 ~ 12.
Then press the CHANNEL
UP key to automatically
search for available channels:
Digital (ATSC) and Analog (NTSC).
The Channel Search contains two processes that are
executed simultaneously for digital and analog
channels.
I
Remove the batteries if the remote control will not be used for a
month or more. Weak batteries may leak and cause damage.
(Normal battery life is roughly six months.)
I
If batteries have leaked in the Remote Control Unit, carefully wipe
the case clean and load new batteries.
IMPORTANT NOTE: Spent or discharged batteries must be recycled
or disposed properly in compliance with all applicable laws. For
detailed information, contact your local County Solid Waste
Authority.
NOTES:
The on-screen message for digital search will appear with a
progress bar and percentile number displayed across the
bottom of the screen (to indicate activity) as the search process
continues. (Channel numbers will appear under the progress
bar only when a digital channel is found.)
AUTO CLOCK SETTING (Optional)
4
Channel information found during the channel search is
stored in the Channel Scan Memory database. After the
channel search is completed, the DTV will tune to the lowest
Digital channel or lowest Analog channel if no digital channels
are found.
After channel search is complete, the DTV will begin
Auto Clock setting. This feature searches for a local
PBS station that is broadcasting an extended data
service signal. This signal is used to automatically
set the clock/day. (This
If the DTV does not detect any
digital or analog channels, a
message advising the viewer
to check the cables and
antenna connections will
appear. In this case, you must
press the CHANNEL UP key
may
take
several
seconds.) To cancel auto
clock setting, press the
CHANNEL UP key. (To
set the clock manually,
see page 19.)
again to repeat the channel
search process. If after two
ANTENNA SELECTION (Optional)
searches the DTV still fails to detect any channels, the DTV
will tune to analog channel 3. These two channel searches
are necessary even if you plan to use the DTV only as a
monitor.
5
To change the initial ANALOG tuning system setup
(from antenna to cable or cable to antenna), use
the on-screen menu. See “Antenna Selection” on
page 15.
If no analog or digital channels are found after the
second search, Channel Search will default to off-air analog
channels 2 through 69 and digital channel D3-1. Select analog
channels using the remote control keypad. See page 11, item
number 3.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
HDTV BACK—JACKS LOCATIONS AND FUNCTIONS
Ž
Œ
COMPONENT VIDEO INPUT VIDEO AUDIO INPUT
VIDEO 2 VIDEO 1
DIGITAL
AUDIO
S-VIDEO
OUTPUT
ANALOG
AUDIO
OUTPUT
COMPO 3 COMPO 2 AUDIO 3
DIGITAL
ANTENNA IN
Y
VIDEO
UHF/VHF/CATV
Pb
AUDIO (MONO)
L (MONO)
L
L
SERVICE
Pr
R
R
‘
’ “ ”
Œ Component Video Input (COMPO 2)—Connect
digital video equipment to the Y, Pb, Pr and Video 2
Audio L/R jacks. These jacks will automatically detect
the type of signal being received (HDTV, EDTV, or
SDTV). (See page 9.)
Component Video Input (COMPO 3)—Connect
digital video equipment to the Y, Pb, Pr and Audio 3
(L/R) jacks. These jacks will automatically detect the
type of signal being received (HDTV, EDTV, or SDTV).
(See page 9.)
‘ Audio/Video Input (VIDEO1/VIDEO2)—Connect
S-Video (Video 1 and 2) Input—To enhance video
detail, use the S-Video (Video 1/2) jacks instead of the
Video jacks, if available on your external equipment.
(S-Video connections will override connections to the
Video 1/2 input jacks.) (See page 10.)
standard video equipment here. (See page 10.)
NOTE: S-Video1/2 connections override the AV1/2
video composite connections.
’ Analog Antenna Input (UHF/VHF/CATV)—Connect
an RF antenna, cable, or satellite receiver to this ter-
minal as shown on page 5.
Ž Digital Audio Output—Use an Optical Audio cable to
connect the Digital Audio Output to an advanced
®
stereo home theater system equipped with Dolby
“ Digital Antenna Input—Connect an RF antenna to
Digital 5.1. (See page 9.)
this terminal as shown on page 5.
Analog Audio Out (L/R) Jacks—Connect external
” Service Terminal—For technical use only.
audio equipment here. (See page 10.)
GLOSSARY OF CABLES
Audio Cables—Provides analog left/right
audio for your external equipment connec-
tions.
Coaxial Cable—Used to connect a signal to
your digital or Analog RF Antenna In terminal.
Optical Digital Audio—Use this cable to
connect the DTV ‘s digital audio output to a
multi-channel audio receiver.
Component: Y, Pb, Pr—Use these cables
to connect your component equipment.
This connection provides the best picture,
but does not include sound. (Cable colors:
Y = green, Pb = blue, and Pr = red.)
S-Video Cable—This cable provide separate
luminance and color signals for higher reso-
lution and better picture quality. Use this
cable instead of the regular composite video
cable (RCA type), when available.
Composite Audio/Video (RCA type)—
Use these cables for standard analog
audio/video connections. Normally cables
are color coded: Yellow for Video, White for
(L) Audio, and Red for (R) Audio.
NOTE: None of these cables are supplied with this DTV.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CHOOSE YOUR CONNECTION
This DTV is designed to handle several different connec-
tions making it compatible with Digital and Analog
devices.
In order to receive the best performance from your DTV,
choose your connection using this chart; then go to the
specified page for detailed instructions.
Digital Signal
Connections
Compatible External
Equipment
Cables Needed
(Not Supplied)
Go to
Page
COMPONENT
(Y, Pb, Pr) IN
Component
Video
9
Cable
Will accept HDTV,
EDTV, or SDTV Video
content.
Digital Cable Box
or DVD Player
Audio Cable
(Requires separate
audio connections.)
Satellite Receiver
DIGITAL AUDIO
OUT
Optical
Digital
Cable
9
(Only available when
received as part of a
Digital RF signal.)
Multi-Channel
Receiver
Analog Signal
Connections
Compatible External
Equipment
Cables Needed
(Not Supplied)
Go to
Page
COMPOSITE VIDEO
OR
S-VIDEO IN
Composite
Video Cable
10
LEFT / RIGHT
DVD Player
Satellite
Receiver
ANALOG AUDIO IN
S-Video
Cable
VCR
ANALOG AUDIO
OUT JACKS
10
Audio Cable
Stereo Amplifier
System
8
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL A/V CONNECTIONS
USING COMPONENT JACKS TO
CONNECT A DVD PLAYER OR OTHER
DIGITAL EQUIPMENT
The Component Video jacks will accept HDTV, EDTV, or
SDTV video content.
CONNECTING DIGITAL AUDIO OUT
JACKS TO A MULTI-CHANNEL
RECEIVER
®
Dolby Digital Audio provides 5.1 channels of surround
sound (five full-range channels [5] and one low-frequency
effect channel [.1]). A fiber optics cable is used to carry
the 5.1 surround sound (for low-noise signal transfer).
Switch off DTV and external equipment before connect-
ing cables. (Cables are not supplied.) Follow these steps
to easily connect your STB or DVD to this DTV:
Using a Fiber Optics cable, connect the DTV’s Digital
Audio Output to the Digital Audio Input of a Multi-
Channel Receiver. (Fiber optics cable is not supplied.)
1
Connect DVD Player or other digital equipment’s
Component Video Out to the DTV’s Component
Video Input jacks.
1
Press POWER to turn on the DTV, then turn on
external equipment.
2
Connect DVD Player or other digital equipment’s
Audio Out to the DTV’s Audio 3 Input jacks.
2
3
4
NOTES:
When making the connection, do not pinch or kink the fiber
optics cable.
Press POWER to turn on the DTV, then turn on
external equipment.
Red light visible at the Digital Audio Output does not nec-
essarily indicate that Dolby 5.1 audio is available. Digital
audio is made up of light pulses that the human eye cannot
detect. Dolby 5.1 audio is available at the Digital Audio
Output only when received as part of a Digital antenna
signal.
Press the INPUT to select COMPONENT3 or
COMPONENT2 to view the DVD program.
DVD Player
(or other digital
device such
COMPONENT VIDEO OUT
Y
P
B
PR
VIDEO OUT SELECT
S
as a Digital
Satellite
Multi-Channel
Receiver
OPT.
COPONENT
S-VIDEO OUT
R
L
DIGITAL
OUT
AUDIO OUT
VIDEO OUT
Receiver)
1
DTV Back
2
DIGITAL
AUDIO
OUTPUT
Component
Jacks
Back View
of DTV
COMPONENT VIDEO INPUT VIDEO AUDIO INPUT
VIDEO 2 VIDEO 1
Optical Digital
1
Cable
S-VIDEO
ANALOG
AUDIO
COMPO 3 COMPO 2 AUDIO 3
Y
VIDEO
P
b
L
Pr
R
Remote Control
What you will need
for connections:
Remote Control
What you will need
for connections:
INPUT
INPUT
POWER
POWER
Component Video Cable – 1
Audio Cable – 1
1
4
2
5
3
6
1
4
2
5
3
6
Optical Cable – 1
2
3
4
I
I
I
I
COMPO2 and COMPO3 jacks have identical functions. Compatible
video devices can be connected to either set of jacks.
“No Signal” will appear randomly on the screen when no signal is
detected at the COMPO2 or COMPO3 inputs.
Press the INPUT key after connecting the cables, to select the
COMPO2 or COMPO3 input signal. There is NO need to tune to a
blank channel.
Position your DTV at least 2 feet from stereo speakers. The magnets
in the speakers may affect the picture quality.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
ANALOG A/V CONNECTIONS
USING THE ANALOG VIDEO JACKS
TO CONNECT A VCR (OR OTHER
ANALOG DEVICE)
Switch off DTV and external equipment before connect-
ing cables. (Cables are not supplied.)
CONNECTING ANALOG AUDIO OUT
JACKS TO A STEREO AMPLIFIER
Switch off DTV and external equipment before connect-
ing cables. (Cables are not supplied.)
Connect the DTV Audio Out (R/L) to the Stereo
Amplifier In (R/L).
1
2
Connect VCR’s Audio Video Out to the DTV’s Video
In jacks.
1
Press POWER to turn on the DTV, then turn on
external equipment.
NOTE: For Mono VCR (Single Audio Jack), connect
VCR Audio Out to DTV Audio (L) Input.
NOTES:
Do not connect external speakers directly to the DTV.
Optional
2
Connect VCR’s S-Video Out to the DTV’s S-Video In
Jack.
When TV Speaker is in the ON mode, sound will be
reproduced through your DTV and stereo amplifier.
NOTE: S-Video jacks connection override Video
jacks connection.
When TV Speaker is in the OFF mode, sound will be
reproduced only through the stereo amplifier. (See page
20 to set DTV speakers.)
Press POWER to turn on the DTV, then turn on
3
4
external equipment.
COMPONENT VIDEO
What you will need for
connections:
Press the INPUT to select VIDEO 1 or VIDEO 2 to
view the VCR program.
ANALOG
AUDIO
OUTPUT
COMPO 3
Audio Cable – 1
Y
Back View of VCR
Pb
L (MONO)
P
r
R
IN
1
FROM ANT.
IN
VHF/UHF
R-AUDIO-L
R-AUDIO-L
VIDEO
VIDEO
RF
TO TV
CHANNEL
4
Back View of DTV
3
OUT
OUT
S-VIDEO OUT
S-Video
Jack
2
1
Remote Control
Stereo Amplifier
COMPONENT VIDEO INPUT VIDENPUT
VIDEO 2 VIDEO 1
INPUT
POWER
1
4
2
5
3
6
S-VIDEO
DTV AV
INPUT Jacks
2
ANALOG
AUDIO
OUTPUT
COMPO 3 COMPO 2 AUDIO 3
VIDEO
AUDIO (MONO)
L (MONO)
L
L
R
R
Remote Control
NOTE: Composite jacks
offer only 480i (SDTV)
resolution.
I
I
I
I
Press INPUT key after connecting cables to access the VIDEO 1 or
VIDEO 2 input. There is NO need to tune to a blank channel.
INPUT
POWER
VIDEO 1 and VIDEO 2 jacks have identical functions. Any com-
patible analog video device can be connected to either set of jacks.
1
4
2
5
3
6
3
4
What you will need
for connections:
“No Signal” will appear randomly on the screen when no signal is
detected at the VIDEO 1 or VIDEO 2 inputs.
Position your DTV at least 2 feet from stereo speakers. The
magnets in the speakers may affect the picture quality.
Audio / Video Cable – 1
S-Video Cable – 1
10
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE REMOTE CONTROL
PRECAUTIONS
To ensure safe operation, please observe the following precautions:
Point towards
DTV
Replace both batteries at the same time. Do not use a new battery with
a used battery. Risk of explosion, if battery is replaced by an incorrect
type.
Œ
Do not expose the Remote Control Unit to moisture, or heat.
INPUT
POWER
1
4
2
5
8
0
3
6
9
REMOTE CONTROL KEYS
Power Key—Press to turn DTV on or off.
Ž
Œ
Input Key—Press to change the input signal source
as follows: Analog RF ¬ Digital RF ¬ Video1 ¬ Video2
7
INFO
SLEEP
¬Compo2 ¬ Compo3 ¬ Analog RF.
‘
Number Key—Two keys must be pressed to select a
Ž
RECALL TUNER
MENU
MUTE
direct channel. Example: Press 0 then 6 to select
channel 6. For Analog Cable channels above 100,
press and hold the 1 key until C1– – appears.
’
“
ENTER
Info Key—Press to display the Digital and Analog Full
Banner information (press again to remove the
display):
Digital Full Banner display—Contains a two-part
Channel Number (Major and Minor). If available the
following is also included–Station ID, Program Title,
Date/Time (if set), Antenna Signal Strength, Video Res-
olution, V-Chip Program Rating, and Audio Reception.
CAPTION
EXIT
Virtual Channel
Station ID
Time/Date
Major
Minor
Recall Key—Select the first channel you want to
watch; then select another channel using the
NUMBER keys. Press RECALL to easily switch
between the channels.
Digital 50-1
Dining Out
WREG-DT
9:16pm, Mon Mar 07
English
1920*1080(60i)
Weak
G
NOTE: The RECALL key cannot toggle between a
Digital channel and an Analog channel. See TUNER
(#7) key description.
Strong
V-Chip
Program
Rating
Signal
Strength
Audio
Reception
Program
Title
Video
Resolution
Menu key—Press this key to display the on-screen
menu.
‘
’
Tuner Key—Use this key to toggle from one tuning
system to another, digital channels, and analog
channels.
Analog Full Banner display—Contains Channel
Number (analog antenna/cable), Date/Time (if set),
Station ID (if available), Program Title (if available),
V-Chip Program Rating, and Audio Reception.
NOTE: The TUNER key is inactive when an external
input is selected (Video 1, Video 2, Compo 2, or
Compo 3).
Station ID
Channel No.
Current Time/Date
Cursor L (up) M (down) keys—Press these keys to
move the cursor up and down within the menu.
Analog 12
Dining Out
PBS
9:16pm, Mon Mar 07
“
ꢀ
ꢁ
(right) keys—Press these keys to
Cursor (left)
move the cursor left and right within the menu.
Stereo
G
Audio
Reception
Program Title
V-Chip Program
Rating
(Continued on page 12.)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL KEYS (Continued)
Audio Key—Press to select the desired audio mode
(if available): DIGITAL: Main, Sub1, Sub2, Sub3, etc.;
ANALOG: Stereo, Mono, SAP.
12
13
INFO
SLEEP
0
13
14
15
RECALL TUNER
MUTE
Sleep Key—Press this key, then press the “0” key to
set the Sleep Timer. The desired time can be set from
30 minutes up to 3 hours in 30 minutes increments.
Sleep Timer will switch off the DTV automatically.
NOTE: The Sleep Timer cancels when the DTV is turned off
or if a power failure occurs.
MENU
ENTER
14
15
Mute Key—Press once to minimize the volume.
Press again to restore.
NOTE: This key will not mute sound from the audio out
jacks.
CAPTION
EXIT
16
17
”
Enter Key—Press this key to select an option from
the menu system, when required.
CH
VOL
•
Exit Key—Press this key to exit from the menu
system.
16
17
PIX SHAPE AUDIO RESET
18
11
Volume (VOL – +) Keys—Press the – + keys to adjust
volume. The screen displays a left or right red arrow
that blinks as many time as you press the Vol – +
keys.
12
Reset Key—Press twice to restore factory settings.
The DTV will automatically start Channel Search and
clear all customized settings.
18
Caption Key—Press to select analog or digital cap-
tioning. The Analog Caption modes are: CC1, CC2,
Quikcap, and OFF. The Digital Caption modes are:
Digital CC1 ~ CC6, Quikcap, and OFF.
”
•
NOTE: The Reset Function includes a channel search.
Current Digital and Analog channel databases will be
deleted and new ones created by the Channel Search
process. To receive Digital Cable channels, see page
14 for Digital Cable Search.
Channel Scanning (CH LM) Keys—Press L (up)
M (down) keys to tune to the next higher or lower
channel in the Channel Scan Memory database. The
scanning loop includes analog channels, digital chan-
nels, and all A/ V inputs.
These features will reset to factory defaults:
• Picture/Sound Adjustments: Color, Tint,
Contrast, Brightness, Sharpness, Color Enhancer,
Bass, Treble, and Surround Sound
Pix Shape Key—Use this key to change the video
display format. Available options depend on signal
received and the broadcast’s aspect ratio. They may
include: Letter box, Zoom, and Normal for HT27745;
Full, Zoom1/2, and Normal for HT28745.
11
• Channel Memory —Digital/Analog channel
database will be replaced
• Initial Channel to OFF
Zoom
Normal
Letter Box
• Analog Audio to Stereo
• Captioning to OFF
• V-Guide to OFF
• DTV Speakers to ON
Zoom—Enlarges
image (some of the
top and bottom may
be clipped when
using Zoom 1 or
Zoom 2 modes).
Model HT27745
Model HT28745
• Digital Audio Output to Dolby Digital
• Scan Velocity to HIGH
Letter Box—Black
borders appear at
the top and bottom the sides, of the
of the screen.
Normal—Black
borders appear at
• Menu Language to English
• Auto Clock / Sleep Timer (if previously set)
• Any Video mode to DTV mode
screen.
Note: 16:9 image
without distortion
on a 4:3 screen.
Note: 4:3 image
without distortion
on a 16:9 screen.
If desired, personal settings can be made again
using the menu options.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
DTV ADJUSTMENT AND SETUP
HOW TO OPERATE THE ON-SCREEN MENU
The on-screen menu system provides the viewer with
easy access to adjustments and settings. Just use the
MENU, CURSOR, ENTER, and EXIT keys on the
remote control and follow the on-screen instructions.
Generally, you will use the CURSOR LM keys to
select a menu item and the CURSOR
keys to
make an adjustment. The ENTER key confirms a
setting and moves the entry point to the next menu or
field, when necessary. Press the EXIT key to return to
normal DTV viewing.
MENU NAVIGATION MAP
Sub Menus
IMPORTANT FACTS:
(See Page 14.)
Some Menu options are specific to Digital
and Analog signals and will vary accordingly.
Also, some options are not available in com-
bination. Unavailable options will appear
“grayed-out” in the menu. For example, after
a Digital Cable Search, Digital Add-on Search
will be “grayed-out” because that option is
not supported for Digital Cable Channels.
(See Page 17.)
(See Page 18.)
(See Page 19.)
(See Page 20.)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANNEL SETUP OPTIONS
CHANNEL SEARCH
DIGITAL CABLE SEARCH (OPTIONAL)
Use Channel Search to replace existing Digital and Analog
Channel Scan databases, such as, if you move to another
city or have cable service installed.
This DTV can receive unscrambled (ClearQAM) digital
cable channels, when available. However, not all cable
companies provide ClearQAM digital channels.
NOTES:During Channel Search, current Digital and
Analog channel databases are deleted and new
ones created. To receive Digital Cable channels,
you will have to perform a Digital Cable Search.
Searching for digital cable channels will take about 10
minutes, please be patient.
DIGITAL
Connect a Digital Cable signal directly to
ANTENNA IN
the DTV Digital Antenna In Terminal.
1
2
3
4
5
6
To add new channels to existing databases, use
Digital Add-on Search on page 15.
Press the TUNER key to select the Digital Tuner.
Press the MENU key to display the Main menu.
Press the MENU key to display the Main menu.
1
2
3
4
Use the CURSOR LM keys to highlight the Channel
category. Press ENTER.
Use the CURSOR LM keys to highlight the Channel
category. Press ENTER.
Use the CURSOR LM keys to highlight Digital
Cable Search option. Press ENTER.
Use the CURSOR LM keys to highlight the Channel
Search option. Press ENTER.
Use the CURSOR M key to select Yes. Press
Use the CURSOR M key to select Yes. Press
ENTER.
ENTER.
NOTE: After Channel Search is complete, the DTV will
tune to the lowest Digital Cable channel (or lowest Analog
channel if no Digital Cable channel is found).
IMPORTANT FACT: This DTV maintains only one database of
digital channels. Therefore, when you search for ClearQAM
digital cable channels, the database of antenna digital channels
will be deleted. You will only be able to receive those Clear-
QAM channels your cable company provides.
To restore the antenna digital channel database, reconnect the
antenna and use the menu system to perform a normal
Channel Search.
Program change
from cable company
Cable companies rearrange virtual channels as programming
changes, which may cause the program you are watching to
move to another channel. This message will appear on the
screen briefly to notify you of a change. You will have to re-
locate the program you were watching by scanning through
the channels.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
ANTENNA SELECTION (ANALOG)
DIGITAL ADD-ON SEARCH
Use this feature to switch between analog off-air chan-
nels and analog cable channels.
Use this feature to add new channels to the digital
antenna channel database. Also, use this feature to add
channels when broadcast towers are in opposite direc-
tions from your location.
Press the TUNER key to select analog channels.
1
2
3
4
Channel numbers will appear under the progress bar only
when a channel is found.
Press MENU key to display the Main menu.
Press the TUNER key to select the Digital Tuner.
Use the CURSOR LM keys to highlight the Channel
category. Press ENTER.
1
2
3
4
Press MENU key to display the Main menu.
Use the CURSOR LM keys to highlight the Antenna
Selection option. Press ENTER.
Use the CURSOR LM keys to highlight the
Channel category. Press ENTER.
Use the CURSOR LM keys to choose Cable or
VHF/UHF. Press ENTER.
5
Use the CURSOR LM keys to highlight Digital
Add-On Search option. Press ENTER.
Press the EXIT key to return to normal DTV viewing.
6
Use the CURSOR M key to select Yes. Press
ENTER.
5
NOTES: Turn your Antenna and repeat these steps for each
direction in which there are transmitting towers.
code to obtain specific tower vector information.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANNEL SETUP OPTIONS (Continued)
CHANNEL SCAN MEMORY
INITIAL CHANNEL
The television can be programmed to tune to your
favorite channel each time it is powered on.
Channel Scan Memory is a database of active channels
that you can scan through using the Channel Scan
(up/down) keys. This list can be customized by deleting
and/or adding channels.
Press MENU key to display the Main menu.
1
2
3
4
5
6
7
Use the CURSOR LM keys to highlight the Channel
category. Press ENTER.
Press MENU key to display the Main menu.
1
2
3
Use the CURSOR LM keys to highlight the Initial
Channel option. Press ENTER.
Use the CURSOR LM keys to highlight the Channel
category. Press ENTER.
Use the CURSOR M key to select On. Press ENTER.
Use the CURSOR LM keys to highlight Channel
Scan Memory option. Press ENTER.
Press the TUNER key to choose Digital or Analog.
“Add?” will appear below the channel number if the
selected channel is not in the database. “Delete?” will
appear below the channel number if the selected channel
is already in the database.
Select your favorite channel using the CHANNEL
LM keys on the remote.
Use the CHANNEL LM keys or numerical keys to
select desired channel. HINT: Press the TUNER key
to switch between Digital and Analog Channel Scan
databases.
Press the ENTER key to set the initial channel.
4
Press the EXIT key to return to normal DTV viewing.
8
Press the ENTER key to delete or add the channel.
5
6
When you have finished adding and/or deleting chan-
nels, press the EXIT key to return to normal DTV
viewing.
NOTE: If the TV is powered off while any video mode is
selected, that video mode will be tuned when the TV
is powered on again (Video 1, Video 2, Component 2,
or Component 3).
I
I
I
I
I
When a digital channel is deleted, all of that channel’s sub-channels
are deleted as well.
If the last remaining digital channel is deleted, the entire previous
Digital Channel Scan Memory database will be restored automatically.
Only previously deleted digital channels can be added back to the
database.
If the last remaining analog channel is deleted (cable channel or off-
air channel) ALL analog channels (cable or off-air) will be restored
automatically, regardless of the previous Analog Channel Scan
Memory database.
If one digital sub-channel is added back to the database all of that
channel’s sub-channels will be added back.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
CLOSED-CAPTIONING OPTION
Captioning is hidden textual information transmitted
along with the picture and sound. Turning Captioning
ON causes the DTV to open these captions and
superimpose them on the screen. Because different
types of closed captions can be transmitted with the
picture and sound, separate captioning modes are
provided. The captioning modes recognized by this
model are: Analog EIA-608B and Digital EIA-708B.
Local broadcasters decide which caption signals to
transmit.
CHANGING THE LOOK OF DIGITAL CAPTIONS
This Size, Style, Color, Opacity, and Edge Style of Digital Captions
can be changed.
NOTES: If Opacity is set to transparent, captions may be difficult to see.
Some menu screens include a “Sample Text” box display to
instantly view your selection.
Only true EIA 708B Digital Closed-Captions are affected by all these
settings.
Analog captions generally will not respond to these adjustments,
however, upconverted analog captions may respond to some options.
Press the TUNER key to select the Digital Tuner.
(NOTE: Digital Font options are available only from the Digital
Main menu.)
Main Menu—Digital Font
1
Press the MENU key to display the Main menu.
2
3
4
5
Use the CURSOR LM keys to highlight the Digital Caption
category. Press ENTER.
Use the CURSOR LM keys to highlight an option. Press
ENTER.
Some choices have Background and Foreground options.
Choose Background or Foreground when necessary, then use
the CURSOR LM or
keys to select the desired effect.
Sub Menu—Digital Font Size
Otherwise, simply use the CURSOR LM or
keys to
select the desired effect.
Press the MENU key to move back to the Digital Caption
menu, then repeat Steps 4 and 5 for each option you want to
change.
6
7
When you have finished making adjustments, press the EXIT
key to return to normal DTV viewing.
TO VIEW CAPTIONS
Press the CAPTION key to select caption modes. Digital
modes are: Digital CC1 through Digital CC6, QuikCap, and Off.
Analog modes are: CC1, CC2, QuikCap and Off.
CC1
1
Analog Caption
QuikCap Operation
QuikCap turns captioning on and off with the Mute function. Press
the MUTE key on the remote control to block the TV sound; the cap-
tions display automatically. Press the MUTE key again to restore the
sound. Captions will disappear.
Digital CC1
Digital Caption
17
Download from Www.Somanuals.com. All Manuals Search And Download.
V-GUIDE (PARENTAL CONTROL) OPTION
NOTE: THIS FEATURE IS DESIGNED TO COMPLY WITH THE
UNITED STATES OF AMERICA’S FCC V-CHIP REGULATIONS.
THEREFORE, IT MAY NOT FUNCTION WITH BROADCASTS
THAT ORIGINATE IN OTHER COUNTRIES.
you make when setting up the V-Guide system. Content
ratings are represented by the initials: FV (fantasy vio-
lence), D (suggestive dialog), L (adult language), S (sexual
situations), and V (violence). A rating icon will generally
appear at the beginning of a program, see chart on
page 19.
This Sanyo television is equipped with an electronic
V-Chip to interpret MPAA (Motion Picture Association of
America) and TV Parental Guidelines rating codes. When
these codes are detected, the DTV will automatically
display or block the program, depending upon choices
This television can be set to block programs with
content you deem as inappropriate for your children to
view.
TO BLOCK MOVIE OR TV PROGRAM
Press the MENU key to display the Main menu.
1
2
3
4
5
6
Use the CURSOR LM keys to highlight the V-Guide
category. Press ENTER.
Use the CURSOR LM keys to select ON. Press
ENTER.
Use the CURSOR M to select Adjust. Press ENTER.
Press CURSOR LM and
keys to select Movie
or TV ratings.
Press the ENTER key to Block selected option.
A lock symbol ( ) will appear beside the selected
rating option indicating it is blocked.
V-GUIDE RATINGS—AT-A-GLANCE
MOVIE RATING
TV RATING
When you have finished making adjustments, press
the EXIT key to return to normal TV viewing.
7
TO TEMPORARILY UNBLOCK MOVIE
OR TV PROGRAM
Press the INFO key, then within three
(3) seconds press the ENTER key.
1
This will temporarily sets the V-Guide to
OFF. The V-Guide will remain in the OFF
mode until the DTV power is switched off.
When power is restored, V-Guide will be
ON.
RATED
GUIDELINES
(Dark Gray)
UNRATED
GUIDELINES
(Light Gray)
LOCKED
SYMBOL
Also, V-Guide can be reset to ON by using
the menu system above, steps 1~3.
IMPORTANT FACT: The DTV will automati-
cally block ratings above or unblock ratings
below a selection. For example, if you block
TV rating TV-PG, ratings TV-14 and TV-MA will
be blocked automatically; or if you block
Movie rating PG-13, ratings R, NC17, and X
will be blocked automatically.
TO UNBLOCK MOVIE OR TV PROGRAM
Press the MENU key to display the Main menu.
1
2
3
Use the CURSOR LM keys to highlight the V-Guide
category. Press ENTER.
Blocking TVY7 does not block higher ratings.
Highlight the “ALLOW ALL” option using the
CURSOR LM,
keys, if needed. Press ENTER.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
MPAA MOVIE RATINGS (AGE-BASED)
TV RATINGS (AGE/CONTENT-BASED)
ALL CHILDREN—Program is designed to be appropriate for
children ages 2-6.
G
GENERAL AUDIENCES—All ages admitted.
PG
PARENTAL GUIDANCE SUGGESTED—Some material may not
be suitable for children.
DIRECTED TO OLDER CHILDREN—Program is designed for
children 7 and above. Material may include mild fantasy
violence (FV) or comedic violence.
PG-13 PARENTAL GUIDANCE CAUTIONED—Some material may be
inappropriate for children under 13.
GENERAL AUDIENCE—Program suitable for all ages. Contain
little or no violence, no strong language or sexual dialogue or
situations.
R
RESTRICTED—Under 17 requires accompanying parent or
adult guardian
NC17 NO ONE 17 AND UNDER ADMITTED
PARENTAL GUIDANCE SUGGESTED—Program contains
material that may be unsuitable for younger children. Mater-
ial contains one or more for the following: moderate violence
(V), some sexual situations (S), infrequent coarse language
(L), or some suggestive dialogue (D).
I
The V-Guide menu display remains on screen for approximately 30
seconds. If it disappears, press the V-GUIDE key.
PARENTS STRONGLY CAUTIONED—Some material is
unsuitable for children under 14 years of age. Parents are
strongly urged to use cautions against letting children that 14
watch unattended. Material contains intense violence (V),
intense sexual situations (S), strong coarse language (L), or
intensely suggestive dialogue (D).
I
You can block portions of a TV rating by choosing one or more of
the Content ratings (D, L, S, and V). By blocking just the L and S
content ratings of TV-14, for example, TV-14 rated programs with a
D and/or V content rating could still be viewed.
I
V-Guide limits on programming received via the Analog antenna
input, Digital antenna input, A/V 1 input, and any 480i signals
received through the component jacks are controlled by this DTV.
MATURE AUDIENCE ONLY—Program is designed to be
viewed by adults and therefore may be unsuitable for children
under 17 years of age.
I
V-Guide limits on digital programming received through the Compo-
nent jacks are controlled by the external devices connected to those
jacks (such as a DVD Player or Satellite Receiver). Refer to your
external device’s owner’s manual for instructions on setting V-Guide
limits.
I
Networks and local stations may or may not include the content
ratings portion of the TV Parental Guidelines.
SETUP MENU OPTION
SETTING DATE/TIME
Auto Date/Time Setting
Manual Date/Time Setting
Press the MENU key to display the Main menu.
Use the CURSOR LM keys to highlight Manual
Setup. Press ENTER.
1
2
3
4
4
5
Use the CURSOR LM keys to highlight the Setup
category. Press ENTER.
Use the CURSOR LM keys to select the Hour.
Press the ENTER key (CURSOR
keys) to step
to the next field. Continue until all fields are popu-
lated.
Use the CURSOR LM keys to highlight the
Date/ Time option. Press ENTER.
NOTE: The DTV will ignore all entries if the MENU or EXIT
key is pressed before all fields are populated.
Use the CURSOR LM keys to highlight Auto Clock.
Press ENTER.
When you have entered data in all of the fields, press
the EXIT key to return to normal DTV viewing.
The TV will begin searching
for an analog PBS channel
transmitting date and time
data. If a PBS station is
found transmitting this data,
it will be used to set the
Date and Time automati-
cally. When the process is
completed (or cancelled),
the last analog channel will
be tuned.
6
NOTE: If the Date and Time are set automatically, the
Date and Time will be updated each time that PBS
station is tuned.
(Continued on page 20.)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP MENU OPTION (Continued)
DIGITAL AUDIO OUTPUT
MENU LANGUAGE
Use this feature to choose the format of the audio
output signal: Dolby Digital or PCM.
Press the MENU key to display the Main menu.
1
2
3
4
Press the MENU key to display the Main menu.
Use the CURSOR LM keys to highlight the Setup
category. Press ENTER.
1
2
3
4
Use the CURSOR LM keys to highlight the Setup
category. Press ENTER.
Use the CURSOR LM keys to highlight Menu
Language option. Press ENTER.
Use the CURSOR LM keys to select English,
Español, or Français.
Use the CURSOR LM keys to highlight the Digital
Audio option. Press ENTER.
Press the EXIT key to return to normal DTV viewing.
Use the CURSOR LM keys to select Dolby Digital
or PCM.
5
Press the EXIT key to return to normal DTV viewing.
5
NOTE: The Digital Audio Output option is available
only when you are watching a Digital channel
received via the Digital antenna input. If you are
watching a signal from any Analog input (Analog
tuner or Analog A/ V inputs), the Digital Audio
Output option will be “grayed-out” (unavailable).
PICTURE/SOUND ADJUSTMENT
OPTIONS
PRESET PICTURE AND SOUND OPTIONS
Select Sports, Movie, or News to match the program you
are watching. The DTV will adjust the picture and sound
accordingly.
TV SPEAKER
A yellow bullet will display beside the selected option.
Press the MENU key to display the Main menu.
1
2
3
4
Press the MENU key to display the Main menu.
1
2
3
Use the CURSOR LM keys to highlight the Setup
category. Press ENTER.
Use the CURSOR LM keys to highlight the
Picture / Sound category. Press ENTER.
Use the CURSOR LM keys to highlight TV Speaker
option. Press ENTER.
Use the CURSOR LM keys to choose either Movie,
Sports, or News.
Use the CURSOR LM keys to select ON.
Press the EXIT key to return to normal DTV viewing.
4
Press the EXIT key to return to normal DTV viewing.
5
NOTE: Sound will not be produced
through your DTV speakers when the
OFF mode is selected.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
MANUAL PICTURE/SOUND ADJUSTMENT
COLOR ENHANCER
The available manual options are:
Picture: Choose this option to adjust the Color, Tint,
Contrast, Brightness, and Sharpness.
Selecting WARM will deepen the picture red tints and
COOL will highlight the picture blue tints.
Press the MENU key to display the Main menu.
1
2
3
4
Sound:
Choose this option to adjust the Bass and
Treble.
Use the CURSOR LM keys to highlight the Picture/
Sound category. Press ENTER.
Surround: Choose either On or Off.
Note: Surround sound is not available on digital channels.
Use the CURSOR LM keys to highlight Color
Enhancer option. Press ENTER.
Press the MENU key to display the Main menu.
Use the CURSOR LM keys to select setting.
1
2
3
4
Use the CURSOR LM keys to highlight the
Picture/Sound category. Press ENTER.
When you have finished making adjustments, press
5
the EXIT key to return to normal DTV viewing.
Use the CURSOR LM keys to highlight the Manual
option. Press ENTER.
Use the CURSOR LM keys to select Picture,
Sound, or Surround. Press ENTER.
Use the CURSOR LM keys to select the option you
want to adjust.
5
Then use the CURSOR
keys to make an adjust-
6
7
8
9
ment (or to set On/Off).
Press the MENU key to move back to the
Picture/Sound menu, if necessary.
Repeat Steps 4 through 7, as necessary.
SCAN VELOCITY
This television has an electronic circuit that regulates the
scan speed of the electron beam creating sharp transi-
tions between the light and dark portions of the picture.
The results are crisp edges and sharply-defined clarity.
Select LOW or HIGH option to change settings.
When you have finished making adjustments, press
the EXIT key to return to normal DTV viewing.
Press the MENU key to display the Main menu.
1
2
3
4
Use the CURSOR LM keys to highlight the Picture/
Sound category. Press ENTER.
Use the CURSOR LM keys to highlight the Scan
Velocity option. Press ENTER.
Use the CURSOR LM keys to select High, Low, or
Off.
When you have finished making adjustments, press
the EXIT key to return to normal DTV viewing.
5
21
Download from Www.Somanuals.com. All Manuals Search And Download.
HELPFUL HINTS (Problems/Solutions)
Because of the Quality we build into our product,
below and try the solutions listed for your problem. If the
problem still persists, before returning your DTV,
us toll free at 1.800.877.5032. We can Help!
very few problems are actual DTV defects. Most prob-
lems only involve simple hookup or setup changes that
can be solved by the customer. Please check the chart
Problem
Check these Conditions
Try these Solutions
Page No.
G
G
DTV turns off
automatically.
Press POWER key.
The sleep timer may have been set.
Unplug DTV momentarily.
Check signal (Cable/Ant.) connection.
Power surge protection feature.
5, 11
G
G
G
G
G
No picture, sound
(Digital Picture).
Adjust antenna.
Try a different channel.
Press RESET key to restart channel
search.
Check antenna/external connections.
May be station trouble, NO signal
broadcast.
MUTE function may be on.
5, 12
17
G
G
G
G
G
Adjust Volume.
G
G
No Captioning.
Check if station is broadcasting a
Closed-Caption signal. Select another
channel.
Press CAPTION key to select
Captioning.
G
G
Cannot customize
Caption.
Digital Caption signal not broadcast.
Press CAPTION key to select Analog
17
12
captioning.
G
G
Cannot display
picture on a full
screen.
Letter Box 16:9 or Pillar Box 4:3 signal
broadcasted.
Press PIX SHAPE key to expand or zoom
the image.
G
G
Pixilation of Digital
image.
Press INFO key and check the signal
strength.
Turn antenna, install signal booster.
Install outdoor Digital antenna.
5, 11
G
G
G
Poor Picture/
Sound (watching
Analog).
Check if program is in color.
Check antenna/external connections.
Color or Tint misadjusted.
May be station trouble.
Try a different channel.
Adjust antenna.
Press RESET key to restart channel
search.
20 ~ 21
G
G
G
G
G
G
G
MUTE function may be on.
Adjust Volume.
G
G
“No Signal”
message
appears on the
screen.
Check Audio/Video connections.
Check external equipment connections.
Check external equipment setting.
Press INPUT key.
Switch on external equipment.
Set external equipment output con-
nections to match input connections.
9 ~10
G
G
G
G
G
G
Press AUDIO key.
No DTV Stereo or
SAP sound.
Check if station is broadcasting a true
MTS stereo signal or a SAP signal.
12
16
G
G
Cannot select or
scan some
channels.
Channel may be removed from
memory.
Check antenna connections.
No digital signal being broadcast.
Signals are weak.
V-Guide is set to block programming.
Select CH. Scan Memory and manually
add channels or start CH. (channel) search.
Turn Antenna or install signal booster.
Set V-Guide to ALLOW ALL or press
RESET key to clear all settings and restart
channel search.
G
G
G
G
18 ~ 19
G
G
G
G
No Cable channels
above number 13.
Cable Channel Indicator C should
appear next to channel number.
Switch Antenna mode to Cable.
15
G
G
Remote Control
will not work DTV.
Check batteries.
Check if DTV is plugged in.
Replace batteries.
Aim remote control at front of DTV.
6, 11
G
G
G
Cabinet makes
popping sound.
This is a normal condition during warm-
up and cool down of the plastic cabinet
parts.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
MEXICO GUARANTEE
IMPORTADOR:
COMERCIALIZADORA MEXICO
AMERICANA, S.DE R.L. DE C.V.
AV. NEXTENGO N 78
COL. SANTA CRUZ ACAYUCAN
DEL. AZCAPOTZALCO, MÉXICO, C.P. 02770
RFC: CMA9109119L0
DESCRIPTION: Television
BRAND: SANYO
o
MODELS: HT27745
HT28745
GUARANTEE
THE APPARATUS THAT YOU HAVE ACQUIRED HAS A ONE YEAR GUARANTEE FOR MANUFACTURING
DEFECTS AND A ONE YEAR SERVICE WARRANTY FROM THE DATE OF PURCHASE GRANTED BY:
COMERCIALIZADORA MEXICO-AMERICANA, S. DE R.L. DE C.V.
UNDER THE FOLLOWING CONDITIONS:
1. TO MAKE THE GUARANTEE EFFECTIVE, SIMPLY SHOW THIS POLICY FILLED OUT BY THE STORE OR
SUPPLIER UNIT OR THIS SALES INVOICE, WITH THE APPARATUS IN ANY OF THE SERVICE CENTERS
INDICATED ON THIS GUARANTEE.
2. IF THE FAULT IS ATTRIBUTED TO A MANUFACTURING DEFECT, THE APPARATUS WILL BE REPLACED OR
YOUR MONEY REFUNDED. DURING THE 30 DAYS SUBSEQUENT TO THE PURCHASE THE GUARANTEE
WILL BE VALID AT THE STORE WERE THE APPARATUS WAS PURCHASED, PRESENTING THE ABOVE
DOCUMENTS.
3. REPAIR TIME WILL NEVER BE MORE THAN 30 DAYS. IF THIS TIME HAS ELAPSED, AND THE PRODUCT ISN’T
REPAIRED, COMERCIALIZADORA MEXICO AMERICANA, S. DE R.L. DE C.V. WILL PROCEED TO EFFECTUATE
THE EXCHANGE FOR AN EQUIVALENT APPARATUS OR THE RETURN OF THE BUYING-SALE
COST RESPECTIVELY.
4. THIS GUARANTEE WILL COVER ITS TOTALITY OF PIECES, COMPONENTS AND SERVICE REPAIR OF
PRODUCT, AND THE RESPECTIVE COST OF TRANSPORTATION.
THIS GUARANTEE WILL BE NULL AND VOID IN THE FOLLOWING CIRCUMSTANCES:
WHEN PRODUCT HAS BEEN USED IN A DIFFERENT CONDITION THAN ITS NORMAL USE.
*
*
WHEN PRODUCT HASN’T BEEN OPERATING CORRECTLY ACCORDING TO THE INSTRUCTIONS IN THIS
MANUAL.
WHEN PRODUCT HAS BEEN CHANGED OR REPAIRED BY PERSONS NOT AUTHORIZED FROM THE
MANUFACTURER, IMPORTER, OR MERCHANT RESPONSIBLE RESPECTIVE.
*
CENTRO DE SERVICIO Y LUGAR DONDE OBTENER PARTES, COMPONENTES, CONSUMIBLES Y ACCESORIOS:
SUCURSAL VALLEJO SUCURSAL MINERVA
o
o
Poniente 126 N 288 B
Silos N 135, Col. Minerva
Col. Nueva Vallejo
México, D.F.
Tels. 5567-5378
5368-0105, 8589-8033
Deleg. Iztapalapa
México, D.F. 09810
Tels. 5646-4551
5646-4550
STAMP, DATE AND SIGNATURE
OF
STORE
DESCRIPTION: ________________________________ BRAND: __________________ MODEL:________________________
CLIENT’S NAME: _________________________________________________________________________________________
ADDRESS: _______________________________________________________________________________________________
EXTERIOR NUMBER: _____________________________________ INTERIOR NUMBER: __________________________
SUB DIVISION: ___________________________________________ STATE/DELEGATION: _________________________
TELEPHONE: _____________________________________________
23
Download from Www.Somanuals.com. All Manuals Search And Download.
UNITED STATES AND CANADA WARRANTY
ONE-YEAR LIMITED WARRANTY
THIS LIMITED WARRANTY IS VALID ONLY ON SANYO TELEVISIONS PURCHASED AND USED IN THE
UNITED STATES OF AMERICA, CANADA, AND PUERTO RICO, EXCLUDING THE UNITED STATES’ OTHER
TERRITORIES AND PROTECTORATES. THIS LIMITED WARRANTY APPLIES ONLY TO THE ORIGINAL PUR-
CHASER, AND DOES NOT APPLY TO PRODUCTS USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES.
FOR ONE YEAR from the date of purchase, Sanyo Manufacturing Corporation will replace any defective TV.
To insure proper warranty exchange, keep the original sales receipt for evidence of purchase. Return the
defective TV to the retailer along with the receipt and the included accessories, such as the remote control.
The defective TV will be exchanged for the same model, or a replacement model of equal value, if neces-
sary. Replacement model will be contingent on availability and at the sole discretion of Sanyo
Manufacturing Corporation.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OF MER-
CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
OBLIGATIONS
For one year from the date of purchase, Sanyo Manufacturing Corporation warrants this product to be free from
defects in material and workmanship under normal use and conditions. Should replacement be necessary
under this warranty for any reason due to manufacturing defect or malfunction during the first year from date
of original purchase, Sanyo Manufacturing Corporation will provide a new TV via exchange at the retailer.
For customer assistance, whether during or out of the warranty period, call toll free 1-800-877-5032.
Weekdays 7:30 AM – 7:00 PM Central Time
Saturday 7:30 AM – 4:00 PM Central Time
This warranty expresses specific contractual rights; retail purchasers may have additional statutory rights
which vary from state to state.
(EFFECTIVE: August 1, 2002)
For your protection in the event of theft or loss of this product, please fill in the information requested below
and KEEP IN A SAFE PLACE FOR YOUR OWN PERSONAL RECORDS.
Model No.______________________________ Date of Purchase _________________________
Serial No.______________________________ Purchase Price___________________________
(Located on back of unit)
Where Purchased_________________________
AS
Sanyo Manufacturing Corp.
3333 Sanyo Road, Forrest City, AR 72335
CARE AND CLEANING
CLEANING THE CABINET
The surface of the cabinet can be damaged if not properly maintained. Many common
household aerosol sprays, cleaning agents, solvents, and polishes will cause permanent
damage to the fine surface.
1. Unplug the power cord before cleaning the television.
.
2 Clean the cabinet with a soft dry cloth.
Note: Never spray liquids on the screen because they can run down and drip onto
the chassis. This may cause component failure not covered under Warranty.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
|