INSTRUCTION MANUAL
LCD Colour Television
LCD-27XA2
LCD-32XA2
P
Plea s e r ea d t h is In s t r u ct ion Ma n u a l befor e u s in g you r t elevis ion .
We wis h you m a n y h ou r s of p lea s u r e fr om you r n ew t elevis ion .
Download from Www.Somanuals.com. All Manuals Search And Download.
Insta lla tion
Ste p 1 : Conne c ting the Ae ria l a nd Powe r Sup p ly
• Connect your aerial cable plug to the rear of the TV set.
For further information please consult your local dealer.
• Connect the AC power plug to the wall socket (AC100-264 Volts, 50Hz/60Hz).
Note: The form of the AC code and AC plug are different with each country.
ANT.75Ω
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Insta lla tion
Ste p 2 : Ba tte ry Insta lla tion of the Re m ote Control Tra nsm itte r
Use 2 “AAA” 1.5 volt batteries.
Be sure batteries are installed correctly.
Note: Do not mix old batteries with new ones or mix different type of batteries together.
Ste p 3 : Switc hing on/ Plug & Pla y
Le t’s sta rt !
This TV set provides a self-automatic tuning system function called “Plug & Play”.
It automatically begins searching and storing of all available channels when switching-on the
TV set for the first time.
1 Press the Power ON/OFF button to turn the TV on, and the TV set will search and store of
all available TV channels automatically.
2 After completing Plug & Play, press the MENU button to return to the normal TV mode.
✐ This procedure only appears at the first switch-on time.
Now the installation is completed !
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Pa ne l
Each button listed this section has the same function as it’s corresponding button on the
Remote Control
P
Stand-by and
Power Indicator
Volume
Remote Control
Detector
Programme
Up/Down
Power ON/OFF
button
Viewing Angle Adjustment
Swivel stand is rotated 360˚ right and left.
Caution
Do not position hand under the screen frame
P
while rotating the TV.
360˚
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Re m ote Control Tra nsm itte r
Recall/Colour System
Wide
Power ON/OFF
Sound Mute
To select half mute, full
mute or restore the sound.
Digital Shot
TV/AV Selector
Press repeatedly to switch to
TV, AV1, AV2, AV3, AV4 or
AV5 mode.
DVD button
TIMER
To call up the Timer menu
directly.
Numeric buttons
Digit
Programme Up/Down
To select the next or previ-
ous programme position.
Alternate
These buttons are not used.
OK button
MENU
Sound Mode
Volume +/
To increase or decrease the
sound volume level.
-
Cursors
Stereo/Mono
Picture Mode
VCR and DVD button
CS
BASS
SURROUND
CS button
TEXT/TV
Red
To call up the List screen of
the Digital Shot.
Green
Blue
Yellow
Download from Www.Somanuals.com. All Manuals Search And Download.
Ge ne ra l Op e ra tion
Alte rna te
Po we r O N/ O FF(Sta nd b y)
Press the Alternate button, and the
Press the Power ON/OFF button to
programme position will alternately
select the previous position and the
present position.
turn on or off (Stand-by) the TV set.
Lighting of the Stand-by and Power Indicator
shows that there is a power supply. For shut-
ting off a power supply completely, discon-
nect the power cord from the power outlet.
Pic ture Mo d e Se le c tio n
Press the Picture Mode button
repeatedly to select the following
picture modes;
You can turn on the TV in the standby mode
by pressing the following buttons in addition
to the Power ON/OFF button.
✐ Programme Up/Down button of the
remote control transmitter or the TV set.
✐ 1 to 9, 0 button on the remote control
transmitter.
Personal : Your personal preference mode.
Standard: Normal viewing mode.
Dynamic: Suitable for brightly lit room.
So und Mo d e Se le c tio n
Auto Shut O ff Func tio n
If the TV is left on after you have gone to
sleep, the TV set changes to the standby
mode within 10 minutes after all broadcasts
have ended.
Press the Sound Mode button
repeatedly to select the following
sound modes;
Personal: Your personal preference mode
Music: Suitable for music programme.
Talk: Suitable for news programme.
Normal: Normal listening mode.
.
Dire c t Pro g ra m m e Se le c tio n
Example:
✐ Press 6 button to select programme
position 6.
Ba ss Exp a nd e r O n/ O ff
✐ To select programme position 27, press
Press the BASS button to get an
emphasised bass sound.
the Digit button, press 0, 2 then 7 button.
-/- -
or
Press the Digit button, press 2, 7 button
and wait for 5 seconds.
Ac tive 3D Surro und
-/- -
Press the SURROUND button to
switch 3D Surround on (Active)
and off.
✐ To select programme position 215, press
the DIGIT button, press 2, 1 then
5 button.
-/- -
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Ge ne ra l Op e ra tion
A2 Ste re o , NIC AM Ste re o
a nd Biling ua l Bro a d c a st
Re c e iving
Pro g ra m m e Info rm a tio n C a ll
To display the on screen indication, press
the Recall/Colour System button.
✐A2 Stereo and NICAM Stereo sound
reception
When receiving NICAM stereo broadcast,
NICAM will be displayed on the screen. For
A2 (German) stereo broadcasts, Stereo will
be displayed. When a clear stereo sound
can not be obtained during NICAM or A2
(German) stereo broadcast due to poor
signal reception, press the Stereo/Mono
button to select mono mode.
Sound Status
Programme Position
NICAM
03
OFF 02:00
AUTO
BG
Off-timer
NICAM Stereo
Colour System
Sound System
NICAM
Mono
Mono
A2 Stereo
C o lo ur Syste m Se le c tio n
Stereo
If the clear picture cannot be obtained, press
the Recall/Colour System button repeated-
ly until optimum image can be produced.
✐ Bilingual reception
If the TV receives bilingual programs, the
TV initially selects language A and displays
“A” on the screen briefly. If you want to
switch to language B or Mono (only avail-
able in NICAM reception), press the Stereo/
Mono button.
AUTO
PAL
SECAM
NTSC4.43
NTSC
NICAM Bilingual
A colour system entry to the memory can
not be made during TV mode, make it
during Semi-auto tuning mode.
B
A
Mono
A2 Bilingual
B
A
Download from Www.Somanuals.com. All Manuals Search And Download.
Ge ne ra l Op e ra tion
Sc re e n Mo d e Se le c tio n
Today there are various transmission formats with different size ratios, e.g. 4:3, 14:9, 16:9
and video format such as letterbox. 4:3 picture sometimes have a black band at the top and
bottom of the screen. You can select a screen mode to optimise the picture display.
Press the Wide button to select the following screen modes;
Auto / Natural / Zoom 14:9 / Title-in 14:9 / Zoom 16:9 / Title-in 16:9 / Full /
Normal
Auto
It automatically switches to the optimum screen mode according to the WSS signal provided
in the receiving signal source. If the signal does not have it, the TV keeps current screen mode.
This setting may cause the picture to change when a different format is received e.g. when an
advert is received.
WSS (Wide-Screen-Signalling)
This function is to be automatically set to the optimum screen mode for the wide screen
television according to the aspect ratio bits of the picture format (16:9, 14:9, 4:3, etc.) on
the receiving signal source. To use this function, the picture mode should be selected to
the “Auto” mode. This function is also effective in the AV mode. When you connect AV
equipment which has the WSS function, the screen mode is automatically selected to the
optimum screen mode.
Na tura l
4:3
14:9
16:9
Letterbox Video
Stretches the picture
horizontally to fill the
screen, the picture is
more stretched at the
edges.
The height is expand-
ed to fill the whole
screen.
The picture fills the
screen and is propor-
tionally correct.
The black bars top
and bottom remain
and the height is
compressed to fit into
the picture area.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Ge ne ra l Op e ra tion
Zoom 14:9
4:3
14:9
16:9
Letterbox Video
The correct picture
width is maintained
but the top and
Zooms in slightly
cropping the top and
bottom.
Zooms in slightly
cropping the top and
bottom.
The black bars top
and bottom are small-
er and the picture
height is compressed
slightly.
bottom are cropped.
Title -in 14:9
4:3
14:9
16:9
Letterbox Video
TITLES ON SCREEN
TITLES ON SCREEN
TITLES ON SCREEN
TITLES ON SCREEN
As zoom (14:9), but
bottom is compressed bottom is compressed
even more to allow
subtitles to be seen.
As zoom (14:9), but
As zoom (14:9), but
bottom is compressed
even more to allow
subtitles to be seen.
As zoom (14:9), but
bottom is compressed
even more to allow
subtitles to be seen.
even more to allow
subtitles to be seen.
Zoom 16:9
4:3
14:9
16:9
Letterbox Video
The correct picture
width is maintained
but the top and bot-
tom are cropped.
Zooms in slightly
cropping the top and
bottom.
Zooms in slightly
cropping the top and
bottom.
The black bars top
and bottom are small-
er and the picture
height is compressed
slightly.
Download from Www.Somanuals.com. All Manuals Search And Download.
Ge ne ra l Op e ra tion
Title -in 16:9
4:3
14:9
16:9
Letterbox Video
TITLES ON SCREEN
TITLES ON SCREEN
TITLES ON SCREEN
TITLES ON SCREEN
As Zoom (16:9), but
bottom is compressed bottom is compressed
even more to allow
subtitles to be seen.
As Zoom (16:9), but
As Zoom (16:9), but
bottom is compressed
even more to allow
subtitles to be seen.
As Zoom (16:9), but
bottom is compressed
even more to allow
subtitles to be seen.
even more to allow
subtitles to be seen.
Full
4:3
14:9
16:9
Letterbox Video
The whole screen is
filled stretching the
width.
The whole screen is
filled stretching the
height slightly at the
edges.
The whole screen is
filled with the correct
picture ratio.
The black bars top
and bottom are bot-
tom are present and
the height is
compressed.
Norm a l
4:3
14:9
16:9
Letterbox Video
The correct ratio is
maintained with black right, picture height is
bars on the left and
right.
Black bars left and
Black bars left and
right, picture height is
stretched.
Black bars left, right,
top and bottom.
stretched.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Ge ne ra l Op e ra tion
2
3
Select a picture that you want to display
Dig ita l Sho t
with the cursor
button.
/
or
/
Use Digital Shot function to capture and
save the up to 12 pictures and replay them in
a list mode, full screen mode and automatic
album mode.
Press the OK button to display.
How to capture the pictures
1 Press the Digital Shot button to capture
a scene that you want to store.
(The screen is not frozen at this time.)
1 / 12
To display guide menu:
Press the OK button. To erase guide menu,
press the OK button again.
Up to 12 frozen pictures can be stored.
12 / 12
: Delete All
: Delete
: Return
: Auto Album
: Exit
CS
“Memory Full” will be displayed for a few
seconds when 12 pictures are stored.
: Delete All
: Delete
: Return
: Auto Album
: Exit
Memory Full
CS
To replay only the selected picture
To return to the List mode:
Press the Blue button.
1 Press the CS button to display the screen
of List mode.
CS
12
1
: Delete All
: Delete
: Select
: Auto Album
: Exit
OK
CS
4
To return to the normal TV mode, press
the CS button.
: Delete All
: Delete
: Select
: Auto Album
: Exit
OK
CS
Download from Www.Somanuals.com. All Manuals Search And Download.
Ge ne ra l Op e ra tion
Auto Album
Deletion of pictures
Use this function to display each picture
continuously.
1 Press the CS button to display the screen
of List mode.
1 Press the CS button to display the screen
of List mode.
CS
CS
1
1
: Delete All
: Delete
: Select
: Auto Album
: Exit
OK
CS
: Delete All
: Delete
: Select
: Auto Album
: Exit
OK
2
Select a picture that you want to delete
with the cursor or
CS
/
/
button. Then press the Yellow button.
2
Press the Green button, and each
picture is displayed continuously every
three seconds.
To stop Auto Album on the way:
Press the Green button.
(To start Auto Album again, press the
Green button again .)
9
: Delete All
: Delete
: Select
: Auto Album
: Exit
OK
or
CS
Press the OK button.
(To display guide menu, press the OK button
again.)
To delete all pictures at a time:
1) Press the Red button in the List
mode.
To return to the List mode:
Press the Blue button.
Delete All ?
To return to the normal TV mode:
Press the CS button.
: Delete
: Cancel
(When the TV/AV Selector is pressed, TV
return to the AV mode.)
2) Press the Red button again.
(To cancel deletion, press the Blue
button.)
No Image
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Me nu Op e ra tion
The on-screen menu provides the viewer
with easy access to adjustments and
settings. Follow the on-screen instruction at
the bottom of the screen.
Pic ture Ad justm e nts
1
Press the MENU button, and select
“Picture” menu with or
.
2
Press
to select a content.
Setting
Preset
P
Picture
Timer
Brightness
Contrast
Colour
Sharpness
Tint
35
52
44
36
32
Picture
Brightness
Contrast
Text Brightness
Memory
Centre
OK?
Sound
Colour
Sharpness
Tint
Text Brightness
Memory
3
Press
or
to adjust.
• Tint :
Adjust colour tints. (Displayed only on
NTSC signal reception.)
: Select
: Contents
MENU : Exit
• Text Brightness :
Brightness of teletext screen (Minimum,
Centre, Maximum). You can not control
the picture and the teletext brightness in
the teletext mode. You must first switch
back to the TV mode and then adjust the
picture control or set the teletext bright-
ness level.
✐ During the menu operation, the following
buttons are used.
MENU
To call up the menu.
To exit the menu.
4
Once the adjustments have been
completed, select “Memory” and press
OK button to store the settings.
Press the MENU button to exit.
To move around
the menus.
Note:
Your picture adjustment will be memorized
to “Personal” of the Picture Mode automati-
cally.
Sound Ad justm e nts
To move around the menus.
To make adjustments.
1
Press the MENU button, and select
“Sound” menu with or
.
OK button
To store the settings.
2
Press
to select a content.
Download from Www.Somanuals.com. All Manuals Search And Download.
Me nu Op e ra tion
4
Press
or
to set OFF timer.
Sound
Volume
Bass
Treble
Balance
BBE
Auto Volume
The time changes in 30 minutes steps.
The maximum time is 2 hours.
23
5
20
0
5
6
Press
timer complete yellow.
or
to make row of OFF
ON
OFF
Press the OK button to store the setting
.
Press the MENU button to exit, or press
3
Press
or
to adjust.
to set alarm timer.
When the TV set is turned off, Off Timer setting
will be cancelled.
• Balance :
Left and Right speaker volume balance
adjustment.
✐ Alarm timer setting
• BBE (ON/OFF)
The alarm will ring for about 15 seconds
when you are watching the television and it
reaches at the set-up time. It may remind
you to do something. (This only happens
when the TV is switched on.)
Enable to switch the BBE sound turn on
and off. BBE High Definition Sound
restores clarity and presence for better
speech intelligibility and musical realism.
• Auto Volume (ON/OFF) :
This function automatically equates the
sound volume of each position. It is used
to prevent the sharp volume change when
you change the channel.
1
Select “Alarm timer” with
Timer menu.
in the
Timer
OFF Timer
Alarm Timer
--
--
:
:
--
--
4
Press the MENU button to exit.
Sound settings will be automatically
stored when you exit the menu.
2
3
Press
Press
or
or
to select “--
:
--” .
Tim e r Se tting
to set Alarm timer.
✐ Off timer setting
The time changes in 5 minute steps.
The maximum time period is 3 hours.
The Off timer will switch the TV set into the
standby mode when the selected time has
elapsed.
4
5
Press
or
to make row of Alarm
timer complete yellow.
1
2
Press the MENU button, and select
“Timer” menu with or
(To display “TIMER” menu directly, press
Press the OK button to store the setting
Press MENU button to exit.
.
.
the TIMER button on the remote control.)
When the time period is up, the time up
sign will appear on the screen and the
alarm will sound for about 15 seconds.
Select “OFF timer” with
.
Timer
OFF Timer
Alarm Timer
To stop the alarm sound and
to erase alarm sign, press
one of the buttons of the
remote control or TV set.
--
--
:
:
--
--
When the TV set is turned off, Alarm timer
will be cancelled.
3
Press
or
to select “--:--” .
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Me nu Op e ra tion
Se tting Me nu
Pre se t Me nu
Use Preset Menu to tune new channels, to
re-order channels and their programme
positions, and to make fine tuning.
This setting menu gives you several options
to adjust.
1
Press the MENU then
select “Setting” menu.
or
button to
Up to 255 broadcast stations can be stored.
Auto Tuning
2
Press
to select a content.
1
Press the MENU button, and select
“Preset” menu with or
Setting
Child Lock
Noise Reduction
Teletext Language
OSD Language
AV2
.
OFF
Min
A
English
Video
2
Select “Auto Tuning” with
.
P
Preset
Auto Tuning
>
Prog. Preset
Swap
Fine Tuning
>
- - -
< >
3
Press
or
to set each option.
• Child Lock (ON, OFF):
You can prevent that a small child
operates television with the front control
button of the TV set. When the power plug
is pulled out, this function is cancelled.
3
4
Press
to enter the Auto Tuning mode,
and “Frequency” will be selected first.
P
Auto
Frequency
Position
System
Sound
• Noise Reduction :
271.65 MHz
007
Auto
(Displayed only on TV mode.)
You can choose noise reduction
mode; OFF, Min, Med or Max.
BG
• Teletext Language :
You can choose your text language, select
A or B.
Press
to start tuning.
All the available stations are automati-
cally stored, starting from position 1.
After completing this procedure, TV set
returns to programme position “1”.
A=English, Arabic and Cyrillic.
B=English, Persian and Cyrillic.
• OSD Language :
This is useful if you wish to change the
On-screen display language (English,
• System (Colour System):
You can change the colour system
, Dutch, Suomi, Deutsch, Hrvatski,
Dansk, Greek, Magyar, Italiano, Polski,
Português, Español, Svenska or Cesky).
with
or
(Auto, PAL, SECAM,
.
NTSC4.43 or NTSC.)
• Sound (Sound System):
• Setting of AV2 input mode :
When you use a S-VHS VCR, you should
connect it to AV2 and change the AV2
menu to “S-Video”.
You can change the sound system
with
or
(BG, DK, I or M.)
.
Auto Tuning can be cancelled at any time by
pressing the MENU button.
4
Press the MENU button to exit.
These settings will be automatically
stored when you exit the menu.
5 Press the MENU button to exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
Me nu Op e ra tion
5
You can either...
Se m i-a uto Tuning
a) Press the Digit (-/--) button, and enter
the frequency (5 digits) using 0-9
buttons referring channel table.
This is used to preset a channel in any pro-
gramme position.
1
Select “Prog. Preset” with
Preset menu.
in the
b) Press and release
(toward the lower
frequency) or
(toward the higher
P
Preset
frequency) to search a TV station.
Once a station is found, tuning will stop
automatically. Repeat until desired
station is found.
Auto Tuning
>
Prog. Preset
Swap
Fine Tuning
>
- - -
< >
• If the clear picture cannot be obtained,
change the colour system with or
2
3
Press
mode.
to enter the Semi-auto Tuning
.
• If the sound is not clear or no sound is
produced, change the sound system
P
Semi
with
or
.
Frequency
Position
System
271.65 MHz
007
Auto
6
Select “Memory” with
OK button to memorize.
, and press the
BG
Sound
Select “Position” with
To select desired programme position:
Press the Digit (-/--) button and enter
.
Repeat steps 3-6 to store other channels in
other programme positions.
the position number (000-254) using 0-9
buttons.
7 Press the MENU button to exit.
or
Fine Tuning
Press
to select programme
position sequentially.
1
Select “Fine Tuning” with
Preset menu.
in the
P
Semi
P
Frequency
Position
System
Sound
Skip
273.25 MHz
010
Auto
BG
OFF
Preset
Auto Tuning
Prog. Preset
Swap
>
>
- - -
< >
Fine Tuning
Memory
OK?
2
Press and hold
channel.
or
to fine tune a
4
Select “Frequency” with
.
P
3 Press the MENU button to exit.
The tuning will be stored when you exit
the menu.
Semi
Frequency
Position
System
273.25 MHz
010
Auto
BG
OFF
Sound
Skip
Any changes made by fine tuning will
Memory
remain even when the TV set is turned off.
OK?
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Me nu Op e ra tion
Se tting o f th e Skip C ha nne ls
C ha nne l Swa p p ing
Use this feature to swap the channels
between two stored programme positions.
This feature is particularly useful after auto-
matic tuning.
If there are positions you do not use, by set-
ting skip channel function, it is possible to
jump over any position when you are select-
ing a channel using the Programme Up/
Down button.
First of all, you have to select a programme
position you wish to swap. eg. swap pro-
gramme position 3 and 12.
1
Select “Position” in the Semi menu.
P
Semi
1
Select programme position eg. 3.
Frequency
Position
System
271.65 MHz
007
Auto
BG
OFF
Sound
Skip
03
Memory
OK?
AUTO
BG
2
Select programme position you want to
skip.
2
Call up the Menu display, and select
To select desired programme position:
“Swap” of the Preset menu with
.
Press the Digit (-/--) button and enter
the position number (000-254) using 0-9
buttons.
P
Preset
Auto Tuning
>
or
Prog. Preset
Swap
Fine Tuning
>
Press
to select programme
- - -
< >
position sequentially.
3
Select “Skip” with
, and set Skip “ON”
3
4
Enter new programme position number
eg. 12 by pressing 0,1 and 2 numeric
buttons.
with
or
.
(To cancel skip channel, set Skip “OFF”.)
P
Semi
Press the OK button to memorize, and
the programme number disappears.
Frequency
Position
System
Sound
Skip
273.25 MHz
010
Auto
BG
The channels are now swapped.
ON
Memory
OK?
5
Press the MENU button to exit.
4
Select “Memory” with
OK button to memorize.
, and press the
5 Press the MENU button to exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
Se tting of the Hote l Mod e
The Hotel Mode is a feature that might be
needed by a hotel management to confine
the TV that put in the hotel room, so it will
not disturb other rooms.
Setting Procedure
1
Set the desired maximum sound volume
by pressing the Volume + or button.
-
2
Press and hold the Recall/Colour
System button on the remote control
and press the Programme Up
button
on the TV set.
3
Select desired item with
or
.
, and
set the option with
or
Prohibition
ON
Start-Position
OFF
• Prohibition (ON, OFF):
Current volume will be set as the maxi-
mum volume, and channel tuning is
prohibited.
• Start-Position :
Setting of the start up programme
position when the TV is turned on.
OFF: Last programme position start.
P1: Programme position “1” start.
P2: Programme position “2” start.
P3: Programme position “3” start.
P4: Programme position “4” start.
P5: Programme position “5” start.
P6: Programme position “6” start.
P7: Programme position “7” start.
P8: Programme position “8” start.
AV1: “AV1” start.
4
Press the Recall/Colour System button
to exit.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Te le te xt Op e ra tion
Cancel
Reveal switch
To view the TV picture in the
teletext mode while waiting for
sub page to change or page
to update. Press again to
return to teletext mode. (Note:
The page number will appear
when the page is updated.)
To reveal hidden items on the
text page e.g. a hidden
answer to a quiz question.
Direct access to a page
To select a page number
directly using the (0-9)
NUMERIC buttons. For exam-
ple, to select page 301, press
3, then 0 and then 1.
Up/down page access
To select the next or previous
page number.
Sub page access
Some text pages are made up
of several sub pages which
rotate automatically. If you
wish to view page-4, press the
Sub Page button, and “S----”
will appear. Then enter “0004”
using NUMERIC buttons.
Size switch
Either the top half or the
bottom half of the page can
be expanded.
Index page selector
To select one of the teletext
index pages.
Teletext / TV selector
To switch TV, TEXT and PAT
(Picture and Teletext) mode.
TELETEXT
DISPLAY
Direct access to subject
headings
CS
(Picture and Teletext mode)
Coloured boxes are displayed
at the bottom of the screen.
The 4 coloured buttons give
access to the corresponding
subjects or pages.
Hold
To stop sub pages from changing.
Teletext language selection
You can select a teletext language. Please return to the TV mode. (See Setting menu.)
Teletext brightness level
You can change the teletext brightness level. Please return to the TV mode. (See Picture
Adjustments.)
Sound volume control in teletext mode.
In teletext mode, sound volume and sound muting can be controlled. However they are not
displayed on the screen
Teletext reception
If your aerial signal is poor, the teletext reception may be poor.
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR a nd DVD Use
This remote control transmitter has been designed to be used in conjunction with selected
SANYO VCR’s and DVD players. Some SANYO VCR’s and DVD players may have their own
functions, so please refer to the individual instruction booklet when using this remote control
to ensure compatibility. Some of the buttons are used for both the VCR and DVD player. The
symbols indicated with blue are for the buttons to control the DVD player. When use the DVD
player with this remote control, first press and hold the DVD button and then press your
desired control button each time.
VCR
DVD
Not used
DVD command mode selection
Power
Play
Power
Play
pause
Stop
Pause
Stop
Fast/Cue
Next chapter selection
Rewind/Review
Previous chapter selection
Not used
Record, press both buttons
at the same time
Not used
Not used
Enter
Cursor selection
21
Download from Www.Somanuals.com. All Manuals Search And Download.
AV Te rm ina ls
Side Terminal
AV4
VIDEO
L
AUDIO
R
Audio Video
Input Jacks (AV4)
Headphone Jack
(Mini Stereo Jack)
For personal listening, a head-
phone can be connected to the
headphone jack.
Rear Terminal
Audio Monitor Output Jacks
AUDIO MONITOR OUT
L
R
Y
VIDEO
L
VIDEO
L
CB
CR
L
R
R
AUDIO
AV1
AV2
AV3
R
Audio Video Input Jacks (AV1)
AV5
DVD INPUT
Scart Terminal (AV2)
Input: Composite video, RGB, S-video and audio-L/R
Output: Monitor-output with composite video and audio-L/R
Audio Video Input Jacks (AV3)
DVD Input (Component Video Input and Audio Input jacks) (AV5)
Download from Www.Somanuals.com. All Manuals Search And Download.
Conne c ting Othe r Eq uip m e nt
You can connect a VCR, S-VHS VCR, Satellite Tuner, PAY TV Decoder, DVD or Camcoder to
this TV via the AV terminals and the SCART terminal.
✐ Depending on the type of video tape or connected AV equipment being used, it may be
necessary to select colour system. In this case, press the Recall/Colour System button
and select a suitable colour system. Colour system setting for AV position is automatically
stored in the memory.
✐ By pressing the Stereo/Mono button repeatedly, you can select the sound track L
(left), R (right) or L/R.
✐ You can select and return to a TV programme by selecting any of the TV position while
watching a playback from a VCR, DVD, etc.
S-Vid e o Conne c tion throug h Sc a rt Te rm ina l Ad a p tor
When you use a S-VHS VCR not provided with the 21-pins scart terminal, connect it with the
AV2 terminal using Scart Terminal Adaptor, and set AV2 status on “S-Video” (Refer to the
Setting Menu on page 16).
PLAYBACK
L
R
S-Video Jack
S-VHS VCR
To S-Video output
To audio output
Y
VIDEO
L
CB
CR
L
R
AUDIO
DVD
AV2
AV3
R
AV5
DVD INPUT
DVD Player etc.
Scart Terminal Adapter
(Supplied with TV set)
✐ Select “AV2” mode by pressing the TV/AV Selector for watching.
Important Note:
Do not input to both S-Video and RCA video input jack of the Scart Terminal Adaptor at the
same time to avoid signal mix and distorted picture.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Conne c ting Othe r Eq uip m e nt
Conne c ting to the Re a r AV5 Inp ut Ja c ks
DVD Pla ye r Conne c tion
If your DVD player has the component video output jacks, connect the TV to these jacks
instead of the video input or S-VIDEO input jacks. You can enjoy high quality picture play-
back.
DVD
DVD Player
Y
CB
CR
L
R
Y
VIDEO
L
VIDEO
L
CB
CR
PLAYBACK
R
R
AUDIO
AV1
AV2
AV3
AV5
DVD INPUT
✐ Take care to ensure that the component video terminals (Y, CB and CR) are wired correctly.
✐ Video input to the component video terminals (Y, CB and CR) is not output on the video
monitor output pin of the scart terminal.
✐ Select “AV5” mode by pressing the TV/AV Selector for watching.
Download from Www.Somanuals.com. All Manuals Search And Download.
Conne c ting Othe r Eq uip m e nt
Conne c ting to the Sid e AV4 Inp ut Ja c ks
It is convenient to use the AV4 input jack on the side panel for equipment that is often
connected and disconnected.
Camcorder
AV4
V
PLAYBACK
L
AUDIO
R
Video Game
Headphone
✐ Select “AV4” mode by pressing the TV/AV Selector for watching.
Conne c ting a Ste re o Am p lifie r to Aud io Monitor Outp ut Ja c ks
Connect Audio Monitor Out terminals (R/L) to the Stereo Amplifier Input (R/L).
The audio signal being output from the TV speaker is output through the Audio Monitor
Output jacks.
L
R
Y
VIDEO
L
CB
CR
L
R
R
AUDIO
AV1
AV2
AV3
R
AV5
DVD INPUT
Stereo Amplifier
✐ Do not connect external speakers directly to the TV.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
He lp ful Hints
✐ He lp ful hints
✐ NO PICTURE, NO SOUND
✐ Check if TV is plugged in.
✐ Try a different channel, if OK, probably station trouble.
✐ POOR PICTURE, SOUND OK
✐ Adjust BRIGHTNESS control.
✐ Adjust FINE TUNING control.
✐ Check aerial connections
✐ NO COLOUR, PICTURE OK
✐ Adjust COLOUR control.
✐ Adjust FINE TUNING control.
✐ Is the programme in colour ?
✐ WEAK PICTURE
✐ Check aerial connections on back of set.
✐ Check aerial for broken wires.
✐ Re-orient aerial.
✐ The following faults are not caused by the receiver:
"GHOSTS"
Reflections of signals from mountains or high buildings will cause multiple images, called
"Ghosts". These abnormal conditions can be reduced to minimum by repositioning aerial or
by installing a new one suited for your area.
"INTERFERENCE"
Interference may be caused by electrical appliances, car ignition systems, etc. This should
normally be a temporary condition, but should this interference persist, contact your
dealer.
R
Manufactured under license from BBE Sound, Inc.
Licensed by BBE Sound, Inc. under USP5510752 and 5736897.
The word “BBE” and BBE symbol are registered trademarks of BBE Sound, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Sp e c ific a tions
Power Source AC100-264 Volts, 50Hz/60Hz
Colour System PAL/SECAM/NTSC4.43/NTSC3.58/PAL-60Hz
Sound System B/G, D/K, I, M/M
Channel Coverage VHF: E2-E12, A2-A13,R1-R12,J1-J12,K1-K9
UHF: 21-69,A14-A69,J13-J62
CATV: S1-S41, X, Y, Z, Z+1, Z+2
Aerial Input Impedance 75 Ω
LCD Panel (Model LCD-27XA2)
Screen Size (Measured Diagonally): 27 inches
Picture Resolution: WXGA 1280 (Horiz.) x 720 (Vert.) pixels
Viewing Angles: Horiz. 176˚, Vert. 176˚
Contrast Ratio: 900:1
Brightness: 550 cd/m2
LCD Panel (Model LCD-32XA2)
Screen Size (Measured Diagonally): 32 inches
Picture Resolution: WXGA 1366 (Horiz.) x 768 (Vert.) pixels
Viewing Angles: Horiz. 176˚, Vert. 176˚
Contrast Ratio: 1000:1
Brightness: 550 cd/m2
Audio Output (RMS) 10W + 10W
Speaker 6 cm x 12 cm x 2 pcs.
AV Terminals
AV1 Video: Composite video (RCA Jack) x 1
Audio: L/R Stereo Input (RCA Jack) x 1 set
AV2 CENELEC Standard (Scart Terminal)
Input: Composite video, RGB, S-video and audio-L/R
Output: Monitor-output with composite video and audio-L/R
AV3 Video: Composite video (RCA Jack) x 1
Audio: L/R Stereo Input (RCA Jack) x 1 set
AV4 Video: Composite video (RCA Jack) x 1
Audio: L/R Stereo Input (RCA Jack) x 1 set
AV5 Video: Component Y, CB,CR Input (RCA Jack) x 1 set
Audio: L/R Stereo Input (RCA Jack) x 1 set
Audio Monitor Output: L/R Stereo Output (RCA Jack) x 1 set
Headphone Jack: Mini Stereo Jack x 1
Net weight Model LCD-27XA2: Approx. 14.1 Kg (Included Swivel Stand)
Model LCD-32XA2: Approx. 17.5 Kg (Included Swivel Stand)
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Sp e c ific a tions
Dimensions
Model LCD-27XA2
(Unit : mm)
153
109
800
599
377
233
Model LCD-32XA2
(Unit : mm)
153
115
922
711
377
233
Specification subject to change without notice
SANYO ELECTRIC Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
|