CA14SE1M
CP14SE1M
CA14SE1K
CP14SE1K
CA14SE1(V)
CP14SE1(V)
CA21CF1(V)
CP21CF1(V)
CA21CF1M
CP21CF1M
CA21SE1M
CP21SE1M
CA21SE1K
CP21SE1K
CA21SE1(V)
CP21SE1(V)
CA21VF1
INSTRUCTION MANUAL
Colour Television
CP21VF1
CA21VF1K
CP21VF1K
Mu lt i Sys t em
CATV Hyp er Ba n d
2 5 6 Pr ogr a m m es wit h Au t om a t ic Tu n in g
Download from Www.Somanuals.com. All Manuals Search And Download.
Plug & Pla y
C o nte nts
Warnings and Cautions . . . . . . . . . . . . . . 2
Contents . . . . . . . . . . . . . . . . . . . . . . . . . 3
Plug & Play . . . . . . . . . . . . . . . . . . . . . . . 3
Front Control . . . . . . . . . . . . . . . . . . . . . 4-5
Remote Control Transmitter . . . . . . . . . . 6
Battery Installation of
Autom a tic se tting up c ha nne ls
This TV set provides a self-automatic tuning and
sorting system function called “Plug & Play”. It
automatically begins searching and storing of all
available channels when switching-on the TV set
for the first time.
the Remote Control Transmitter . . . . . . . 6
General Operation
Remote Control Operation . . . . . . . . . 7
OFF TIMER . . . . . . . . . . . . . . . . . . . . 8
ON TIMER . . . . . . . . . . . . . . . . . . . . . 8
Colour and Sound System
Setting of the Colour System . . . . . . . 8
Setting of the Sound system . . . . . . . . 8-9
Picture Adjustment . . . . . . . . . . . . . . . . . 9-10
Audio Adjustment . . . . . . . . . . . . . . . . . . 10
Tuning of the Channels
Le t’s sta rt !
Connect power cord of the TV set to a wall
outlet, and turn on the TV set by pressing the
Mains ON/OFF button. Self-automatic tuning
system will be started as follows;
1
I
AM SEARCHING.
ALL PROGRAMMES.
PLEASE WAIT.
AUTO SET-UP
COMPLETED.
HAPPY VIEWING !
Automatic Tuning . . . . . . . . . . . . . . . 11
Semi-Auto Tuning and Manual Tuning . 11
.
1
Channel Copy . . . . . . . . . . . . . . . . . . 12
Channel Swapping . . . . . . . . . . . . . . 12
Skip Channel Set and Cancel . . . . . . . . . . .12-13
Setting of the Private Position . . . . . . . . 13
Setting of the OSD Language . . . . . . . . . 14
Connecting Other Equipment . . . . . . . . . 14
Connecting to the Rear AV1 Input
After completing this procedure, the programme
position 1 is selected and the ending messages on
the screen.
Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . .14-15
Selecting the Colour System in AV
Mode . . . . . . . . . . . . . . . . . . . . . . . .15
Connecting to a DVD Player with AV1(DVD)
Video Component output terminal . . .15
Connection to the Front AV2 Input
Note: The Plug & Play can be cancelled at any
time by pressing the MENU button.
Press any of the control buttons to make the
ending message disappear. Or will
automatically return to normal TV display
after 10 seconds.
2
Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Connecting to the Monitor Output
Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
AV Connection to the Aerial Socket . . . . 16
Aerial Connection . . . . . . . . . . . . . . . . . . 17
Care and Cleaning . . . . . . . . . . . . . . . . . . 17
Specifications . . . . . . . . . . . . . . . . . . . . . 18
Helpful
✐ This procedure only appears at the first
switch-on time.
■
If no TV stations are found, the display shown
below will appear. Please check if the antenna
is connected properly.
Hints-Problems/Solutions . . . . . . . . . . . 19
NO STATION.
PLEASE CONNECT
ANTENNA PLUG.
If it isn’t connected properly, connect antenna and
Automatic Tuning will be reset.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Each button listed in this section has the same function as it’s corre-
sponding button on the remote control.
Fro nt C o ntro l
Model CA14SE1(V), CP14SE1(V), CA21SE1(V), CP21SE1(V), CA21VF1, CP21VF1,
CA21VF1K, CP21VF1K
Remote Control Detector
T
V/
A
V
VI
D
EO
MEN
U
L-AU
-
D
IO-R
+
C
H
POW
ER
Video Input Jack (AV2)
Audio Input Jack-Left (AV2)
Audio Input Jack-Right (AV2)
MENU
Mains ON/OFF Button
Stand-by and Power Indicator
Programme UP/DOWN
VOLUME
TV/AV Selector
Model CA21CF1(V), CP21CF1(V)
Video Input Jack (AV2)
Mains ON/OFF Button
Remote Control Detector
Audio Input Jack-Left (AV2)
Audio Input Jack-Right (AV2)
Stand-by and Power Indicator
Programme UP/DOWN
VOLUME
MENU
TV/AV Selector
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Each button listed in this section has the same function as it’s corre-
sponding button on the remote control.
Fro nt C o ntro l
Monaural Model
Model CA14SE1M, CP14SE1M, CA14SE1K, CP14SE1K, CA21SE1M, CP21SE1M,
CA21SE1K, CP21SE1K
Remote Control Detector
VI
T
V/
AV
D
EO
MEN
AU
D
U
IO
-
+
C
H
POW
ER
Video Input Jack (AV2)
Audio Input Jack (AV2)
MENU
Mains ON/OFF Button
Stand-by and Power Indicator
Programme UP/DOWN
VOLUME
TV/AV Selector
Model CA21CF1M, CP21CF1M
Mains ON/OFF Button
Video Input Jack (AV2)
Audio Input Jack (AV2)
Remote Control Detector
Stand-by and Power Indicator
Programme UP/DOWN
VOLUME
MENU
TV/AV Selector
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Re m o te C o ntro l Tra nsm itte r
TIMER button
TV / AV
Power ON/OFF button
TV / AV Selector button
TIMER
MUTE button
RECALL/COLOUR SYSTEM button
Programme Selector button
P
P
-/- -
ALTERNATE button
DIGIT button
Programme UP button
SWAP
CH SCAN
CH
CHANNEL SCAN button
SWAP button
VOLUME - button
VOLUME + button
MENU
STEREO/MONO button
(This button is not used)
PICTURE MODE button
CH
PICTURE
SURROUND
A•B
MENU button
Programme DOWN button
SOUND
S. SYS
BASS
* SURROUND button
* BASS EXPANDER button
* SOUND MODE button
SOUND SYSTEM button
JXPSC
* For monaural models this button is not used.
Ba tte ry Insta lla tion of the Re m ote Control Tra nsm itte r
1. Open the battery cover.
2. Install two “AA” 1.5 volt batteries so that the “+” and “-” marks on the batteries match the “+” and
“ - ” marks inside the unit.
3. Close the battery cover.
Note: Replace the batteries when the TV set is showing the following symptoms:
Operation is unsteady or erratic, sometimes the TV set does not work with transmitter.
Discharged batteries may leak and damage the unit. The normal life of batteries should be from
nine to ten months.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
G e ne ra l O p e ra tio n
Re m ote Control Op e ra tion
Sta nd b y/ Powe r-on
To switch the TV on and off. For shutting off a power supply completely, Press the Mains
ON/OFF button on the front control of TV set.
Sound m ute
To switch the sound from the speakers. The sound changes as follows; norm a l -> m ute ( ).
Tim e r
TIMER
To Adjust Timer function OFF-TIMER -> ON TIMER -> ON PROGRAM
Re c a ll/ Colour syste m se le c tor
To display the programme information on the screen.
It also operates as Colour system selector if the clear picture cannot be obtained even when
the broadcasting or AV signal is received.
Colour System and Sound System (SIF) could be changed in SEMI-AUTO and MANUAL
TUNING operation.
Dire c t p rog ra m m e se le c tor
-/- -
For direct access to programmes using the (0-9) num e ric b utton. For selection of ana-
logue programme position 10 - 255, Example: for programme position 17, Press the Digit
button, press “1” button. Press “7” button. For programme position 125 Press the Digit button twice. Press
“2” button. Press “5” button. For programme position 225 Press the Digit button 3 times. Press “2”
button. Press “5” button.
P
P
Alte rna te
To select the previous position and the present position.
Volum e Up / Down
To adjust the sound volume level . Also operates as left ( ) and right ( ) cursor.
CH
Prog ra m m e d own/ up
To select the next programme number or previous programme number. Also operates as up
(
) and down ( ) cursor.
CH
Swa p
To swap the channels between two stored programme positions
SWAP
SOUND
Sound Mod e (Op tiona l Mod e l)
To select Sound mode; PERSONAL, MUSIC, TALK, NORMAL.
This b utton is not use d
A•B
Pic ture Mod e
To select Picture mode; PERSONAL, DYNAMIC, NATURAL, ECO, GAME.
PICTURE
BASS
Ba ss Exp a nd e r (Op tiona l Mod e l)
To activate bass expander function.
Sound Syste m
To select optimum sound system (BG → I → DK → M).
S. SYS
Surround (Op tiona l Mod e l)
To activate Surround function.
SURROUND
Me nu
To Call up the TV MENU.
MENU
Download from Www.Somanuals.com. All Manuals Search And Download.
7
G e ne ra l O p e ra tio n / C o lo ur a nd So und Syste m
OFF TIMER
Press the VOLUME ( + or - ) button. The set
The OFF TIMER will switch off the TV automatical-
ly after 30 minutes, 1 hour, 1 hour and 30 minutes,
or 2 hours.
2
3
time will be increased or decreased by 10
minutes each time the button is pressed ; the
maximum time which can be set is 24 hours.
Press the TIMER button.
OFF 0:00
Use Direct Programme Selection to insert
programme position for when TV is switched
on by ON TIMER. (see page 7.)
1
2
Press the VOLUME ( + or - ) button to select
the time period.
■ Just one minute before switching off the TV,
“OFF 0:01” will be display on the screen.
■ To cancel the OFF TIMER, select “OFF 0:00”
by pressing the VOLUME (+ or - ) button.
■ If no operation is performed after the TV has
been switched on by the ON TIMER, such as
if you are not at home, the TV will be auto-
matically switched off after approximately
2 hours
■ If the TV is already switched on when the time
set for the ON TIMER has been reached, only
the programme position will be changed to the
set programme position.
■ Cancelling ON TIMER. To cancel the ON
TIMER, press the VOLUME ( + or - ) button to
set it to “ON 0:00” while the ON TIMER screen
is shown. Switching off the TV by pressing the
Mains ON/OFF button will also cancel the
ON TIMER settings.
■ The OFF TIMER cancels when the TV set is
turned off or if a power failure occurs.
ON TIMER
When the ON TIMER is set. TV will automatically
be switched On to the selected programme posi-
tion when the specified time has elapsed.
Press the TIMER button twice.
1
(ON TIMER setting
mode)
ON 0:00
2
Programme position for when TV is
switched ON by ON TIMER.
C o lo ur a nd So und Syste m
Se tting of the Colour Syste m
Se tting of the Sound Syste m
Normally, set the colour system to “AUTO”, if the
clear picture cannot be obtained even when the
broadcasting or AV signal is received, press the
RECALL/COLOUR SYSTEM button repeatedly
until the optimum image can be produced.
(Refer to Broadcast Transmission System List
indicated by the last of this page in a setup of
Colour System.)
To set the sound system, make it during Semi-Auto
Tuning or Manual Tuning mode.
When the sound is not clear or no sound is pro-
duced on a programme number position, select
sound system repeatedly until the optimum sound
is obtained.
(Refer to Broadcast Transmission System List
indicated by the last of this page in a setup of
Sound System.)
Each time the RECALL/COLOUR SYSTEM but-
ton is pressed, colour system changes as follows;
To select sound system:
6
■ Press the SOUND SYSTEM button to select
the sound system directly. The sound system
will be memorized automatically.
6
AUTO
6
PAL
SECAM
6
6
NTSC
NTSC4.43
Note:Colour system is displayed according as
Colour system option.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
C o lo ur a nd So und Syste m / Pic ture Ad justm e nt
or:
Broadcast Transmission System List
1) Select “SIF” with the Programme UP or
DOWN button in the Semi-auto or Manual
Tuning mode. Then press the VOLUME (+ or
Colour Sound
System System
Country
Area
-) button to select a optimum sound system.
Union of Arab Emirates,
Kuwait, Oman, Qatar,
Yemen, Bahrain, etc.
Indonesia, Malaysia,
Singapore, Thailand,etc.
Middle
East
(Semi-Auto or Manual Tuning mode )
PAL
B/G
MODE
SEMI
START
2
Asia
SEARCH
POSITION
SYSTEM
SIF
SKIP
MEMORY
AUTO
BG
OFF
--
China, etc.
Hong kong
D/K
I
PAL
PAL
SELECT
BACK
ADJUST
Saudi Arabia,
Iraq, Iran, Lebanon,etc.
EXIT
B/G
SECAM
BG
(5.5MHz)
I
(6.0MHz)
DK
M
Russian Federation,etc.
Myanmar, etc.
SECAM D/K
(6.5MHz) (4.5MHz)
M
NTSC
PAL
Australia,
New Zealand, etc.
Oceania
B/G
2) To enter a sound system selection into the
memory, select “MEMORY” and press the
VOLUME + or
-
button.
MODE
SEMI
START
2
AUTO
BG
SEARCH
POSITION
SYSTEM
SIF
SKIP
MEMORY
OFF
OK
SELECT
BACK
ADJUST
EXIT
Pic ture Ad justm e nt
Pic ture Ad justm e nt Me nu
Picture Adjustment Item
COLOUR
COLOUR : Adjusts colour intensity.
BRIGHT : Adjusts picture brightness.
CONTRAST : Adjusts picture contrast.
BRIGHTNESS
CONTRAST
WHITE TONE
TINT
FINE TUNING
SHARPNESS
471.25MHZ
TINT : Adjust colour tints. (Displayed only on
NTSC or NTSC4.43 system signal
reception.)
SHARPNESS : Adjusts picture detail.
WHITE TONE : Adjusts white balance.
FINE TUNING : Fine tuning in case of weak
broadcast signal or poor reception. Only
displayed in TV mode. Will not be displayed in
AV mode.
40
37
SELECT
BACK
ADJUST
EXIT
SELECT
BACK
ADJUST
EXIT
Page 1
Page 2
The 2nd page is not displayed when there is no
TINT adjustment.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Pic ture Ad justm e nt / Aud io Ad justm e nt
Ba sic Pic ture Ad justm e nt Op e ra tion
Press the MENU button for MAIN menu
■ To return to Main menu, press the
ALTERNATE button.
■ To return to the normal TV mode, press the
MENU button. ( Or will automatically return to
the normal TV mode after 20 seconds.)
display.
1
(MAIN MENU)
PICTURE
AUDIO
Audio Adjustment
Menu is not
equipped in
PRESET
LANGUAGE
monaural models.
Select desired control by pressing the
Programme UP or DOWN button.
SELECT
ENTER
EXIT
4
COLOUR
When “PICTURE” is not selected, select
“PICTURE” with the Programme UP or
DOWN button.
BRIGHTNESS
CONTRAST
SHARPNESS
WHITE TONE
2
FINE TUNING
567.25MHZ
30
PICTURE
AUDIO
PRESET
LANGUAGE
Press the VOLUME + or
-
button to alter
5 settings.
Press the VOLUME + or
-
button to display
3 Picture Adjustment menu.
COLOUR
BRIGHTNESS
CONTRAST
SHARPNESS
WHITE TONE
FINE TUNING
567.25MHZ
25
The Monaural Models not equipped with Audio
Adjustment Menu
Aud io Ad justm e nt
Aud io Ad justm e nt Op e ra tion
Aud io Ad justm e nt Me nu
Press the MENU button for MAIN menu dis-
play.
BASS
TREBLE
BALANCE
BASS EXPANDER
SURROUND
1
2
Select “AUDIO “ by pressing the Programme
UP or DOWN button.
OFF
OFF
27
PICTURE
AUDIO
PRESET
LANGUAGE
SELECT
BACK
ADJUST
EXIT
Audio Adjustment Item
BASS : Bass Adjustment
TREBLE : Treble Adjustment
BALANCE : Left/right speaker volume balance
adjustment
Press the VOLUME + or
Adjustment menu display.
-
button for Audio
3
BASS
TREBLE
BALANCE
BASS EXPANDER
SURROUND
OFF
OFF
BASS EXPANDER : Operates BASS EXPANDER
on and off
27
SURROUND :Operates SURROUND on and off.
Note: If SURROUND “on”, BALANCE has no function.
Note: When the stereo signal is inputted from the
right and left audio input terminals in the AV mode,
surround mode is changed as follows;
“SURROUND” ON and “SURROUND OFF”.
■ To return to Main menu, press the ALTERNATE
button.
■ To return to normal TV mode, press the MENU
button. (Or will automatically return to normal
TV mode after 20 seconds.)
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Tuning o f the C ha nne ls
Up to 256 broadcast stations in your reception
area can be stored in the electronic memory.
Se m i-Auto Tuning a nd Ma nua l Tuning
There are three ways of tuning as follows;
1. Automatic Tuning (the basic way):
All receivable channels are automatically tuned
in and memorized in consecutive programme
position.
Press the MENU button for MAIN menu
display.
1
Select “PRESET” by pressing the
2 Programme UP or DOWN button.
2. Semi-Auto Tuning:
Press the VOLUME + or
-
PRESET menu display. On entering
button for
Use to preset a receivable channel in any
desired programme position, e.g. the position
with the same number as the channel.
3. Manual Tuning:
3
PRESET display, Automatic Tuning will
be selected initially.
Select “SEMI” or “MANUAL” by pressing the
-
Manually tune a channel if it cannot be
automatically tuned, such as when the signal is
poor.
4
5
VOLUME + or
button.
Select “SEARCH” by pressing the
Programme UP or DOWN button.
Autom a tic Tuning
Press the MENU button for MAIN menu
MODE
SEMI
START
6
display.
1
SEARCH
POSITION
SYSTEM
Select “PRESET” by pressing the
AUTO
2 Programme UP or DOWN button.
Semi-Auto Tuning:
Press and release the VOLUME + or
-
button
PICTURE
AUDIO
PRESET
LANGUAGE
to search for required TV station. Once a
station is located, tuning will automatically stop.
Continue till desired channel is located.
Press the VOLUME + or
-
button for
MODE
SEMI
PRESET menu display. On entering PRESET
display, Automatic Tuning will be selected
3
4
SEARCH
POSITION
SYSTEM
6
AUTO
initially.
Manual Tuning :
Press and hold the VOLUME + or
search for required TV station.
-
button to
MODE
AUTO
START
1
AUTO
BG
SEARCH
POSITION
SYSTEM
SIF
MODE
MANUAL
SEARCH
POSITION
SYSTEM
Select “SEARCH” by pressing the
Programme UP or DOWN button.
6
AUTO
The VOLUME + button will move tuning toward
the higher frequencies, and the VOLUME but-
ton will move tuning toward the lower frequencies.
MODE
AUTO
START
1
AUTO
BG
-
SEARCH
POSITION
SYSTEM
SIF
Once desired channel is located, select
“MEMORY” by pressing the Programme UP
or DOWN button.
Press the VOLUME (+) button to start
5 channel tuning.
6
CH
Press the VOLUME + or
desired channel into memory.
-
button to enter the
7
MENU
1
SKIP
MEMORY
OFF
OK
SELECT
BACK
ADJUST
EXIT
CH
After all receivable channels have been found and
stored, the TV set automatically returns to pro-
gramme position “1”.
To preset other Programme Positions, repeat
steps 5 8.
-
■ The Automatic Tuning operation can be
cancelled at any time by pressing the
Programme UP or DOWN button.
Press the MENU button to return to normal
TV display.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Tuning o f the C ha nne ls
Cha nne l Cop y
This function can be utilized after Automatic
Tuning.
Press the DIGIT button, “ 1 “ button and then
“ 2 ” button on the remote control to enter
programme number 12. (For example, to
enter programme number “ 3 “, press “ 3 ”
button only. )
3
For example, to copy a TV channel on pro-
gramme position “2” onto programme position
“6”;
SWAP 6 AND 12
Select programme position “2” .
1
2
SWAPPING
Enter to SEMI-AUTO or MANUAL tuning
mode. (Refer to page 11.)
2
6
Select “POSITION” with the Programme UP
or DOWN button.
3
The two TV channels will now have changed
places.
Select position “6” with the VOLUME + or
button.
-
4
MODE
SEMI
START
6
AUTO
BG
SEARCH
POSITION
SYSTEM
SIF
12
6
Select “MEMORY” by pressing the
Programme UP or DOWN button.
5
6
7
Skip Cha nne l Se t a nd Ca nc e l
Press the VOLUME
memorize.
+
or
-
button to
When there is a position you do not use, Position
4 for example, by setting the SKIP Channel func-
tion it is possible to jump over this position, when
you are selecting a channel using the Programme
UP/DOWN or CHANNEL SCAN button.
Press the MENU button to return to normal
TV display.
Cha nne l Swa p p ing
Use this channel swapping feature to swap the
channels between two stored programme position.
This feature is particularly useful after automatic
tuning.
3
5
4
Skip
For example, to swap the channel between pro-
gramme position “6” and programme position
“12”.
For example, to set programme position “4” as
Skip channel ;
Enter to SEMI-AUTO or MANUAL tuning
mode. (Refer to page 11.)
1
Select “POSITION” with the Programme UP
or DOWN button.
12
2
6
Press remote control “4” button to select pro-
gramme position 4. Use the DIGIT button
and Programme Selector (Number buttons)
to enter programme number. Do not use the
Select programme position “6”.
3
1
VOLUME + or
position in this settings.
-
button to enter programme
6
Press the SWAP button.
2
MODE
SEMI
START
4
SEARCH
POSITION
SYSTEM
SIF
SWAP 6 AND
-
AUTO
BG
OFF
--
SKIP
MEMORY
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Tuning of the Cha nne ls / Setting of the Priva te Position
Select “MEMORY” by pressing the
Programme UP or DOWN button, then press
Select “SKIP” by pressing the Programme
UP or DOWN button,then press the
5
4
the VOLUME + or
-
button for memory.
VOLUME + or
-
button to set SKIP to ON.
To cancel Skip Channel function, set to OFF.
MODE
SEMI
SEARCH
POSITION
SYSTEM
SIF
SKIP
MEMORY
START
4
AUTO
BG
ON
OK
MODE
SEMI
START
4
SEARCH
POSITION
SYSTEM
SIF
SKIP
MEMORY
AUTO
BG
ON
--
Any number of channels maybe set as Skip
Channels.
SELECT
BACK
ADJUST
EXIT
Press the MENU button to return to normal
TV display.
6
Se tting o f the Priva te Po sitio n
Private position is used to restrict of pro-
gramme positions that you do not want others
to watch. Any position can be set as the Private
position.
To View a Programme on Private Position
Select private position (In this case position “15”).
1
15
How To Se t the Priva te Position
For example, to set the programme position
“15” as the private position.
Press and hold the RECALL/COLOUR
SYSTEM button for more than 2 seconds.
2
Select programme position “15”.
15
1
Press the RECALL/COLOUR SYSTEM
button for watching a TV programme.
15
3
Press and hold the RECALL/COLOUR SYS
TEM button for more than 2 seconds.
15
AUTO
2
BG
Note: The position “15” is still in the private position.
Cancelling of the Private Position
15
Select private position (position “15”).
15
AUTO
BG
1
The programme number “15” will shift to centre of
the screen.
15
Press and hold the RECALL/COLOUR
SYSTEM button for more than 2 seconds.
Press the MENU button.
2
3
15
15
AUTO
Press the MENU button.
BG
3
The picture will disappear, and “
play on the screen.
15” will be dis-
15
AUTO
BG
The private position setting is now completed.
The private position is now cancelled.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Setting of the OSD La ngua ge / Connecting Other Equipment
Press the MENU button for MAIN menu dis-
play.
ENGLISH
1
VIETNAMESE
y
P
CC
N N
FRANCAIS
BAHASA INDONESIA
PICTURE
AUDIO
PRESET
LANGUAGE
Select “LANGUAGE “ by pressing the pro-
gramme UP or DOWN button.
Select “ENGLISH”, “
y
”, “VIETNAMESE”,
2
“
”, “FRANÇAIS”, “BAHASA INDONE-
P
CC
N N
SIA” by pressing the Progamme UP or DOWN
button.
PICTURE
AUDIO
PRESET
LANGUAGE
Press the MENU button to return to normal
TV display.
4
Press the VOLUME + or
Language menu display.
-
button for
3
C o nne c ting O the r Eq uip m e nt
Conne c ting To the Re a r AV1 Inp ut Ja c ks
You may connect the audio and video output terminals of the DVD player or VIDEO recorder to the input
terminals of the TV set to enjoy the DVD and VIDEO programs.
Note: For monaural model TV there is no L/R audio input terminals. If the video player is stereo, con-
nect the Left (L) audio output terminal from video player to audio input terminal on the monaural TV set
(more details see your video player manual book).
INPUT
MONITOR OUT
INPUT
MONITOR OUT
AV1/DVD
AV1/DVD
R
(MONO)
L
R
L
To Audio Input-R (AV1)
R
(MONO)
L
R
L
To Audio Input-R (AV1)
To Audio Input-L (AV1)
To Audio Input-L (AV1)
V
I
D
E
O
V
I
D
E
O
To Video Input (AV1)
VIDEO
To Video Input (AV1)
VIDEO
To Video output
To Audio output
Monaural Equipment
Mono to Stereo Adapter
(not supplied)
Video/DVD Player
■ If the external equipment is a monaural one, Please
use “Mono to Stereo Adapter” (not supplied) and
connect to TV set.
■ To watch video input picture, select
AV1 position by pressing the
TV/AV Selector.
AV1
When the stereo signal is inputted from the right and left audio input terminals, each time the
SURROUND button is pressed (or selection of On-screen Menu), surround mode is changed as follows;
“ SURROUND ON”, and “SURROUND OFF”.
SURROUND
ON
SURROUND
OFF
Note for monaural models: the surround button is no function.
Note: The effect of surround is not obtained although the switching of surround is displayed in this
monaural connection.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
C o nne c ting O the r Eq uip m e nt
■
When watching a video program input from the AV1 terminal, press the TV/AV button to select AV1.
Whenever the TV/AV button is pressed, the mode will change as follows:
AV1(DVD)
AV2
AV1
28
TV mode
(This AV1(DVD) will be
displayed for model with
DVD Component input.)
■ You can select a TV programme while watching a playback from a VCR
For example:
● To select programme position “9” while watching a playback from external VCR, press “9” button of the
remote control. The TV set returns to the TV mode and programme “9” will be selected.
● To select the programme position “26”, press Digit (--/-) button, “2” then “6” button. Then TV set returns
to the TV mode and programme position “26” will be selected.
Note: Pressing either of the PROGRAMME UP or DOWN buttons of the remote control or the TV will
return the TV to the TV mode.
Se le c ting the Colour Syste m in AV Mod e
Depending on the type of video tape or connected AV equipment being used, it may be necessary to
select colour system. In this case, press the RECALL/COLOUR SYSTEM button and select a suitable
colour system.
Each time the RECALL/COLOUR SYSTEM button is pressed, colour system is changed as follow;
AV1
AUTO
AV1
NTSC
AV1
PAL
AV1
SECAM
AV1
NTSC 4.43
Colour system setting for AV position is automatically stored in the memory.
Conne c ting to a DVD Pla ye r with AV1 (DVD) Vid e o Com p one nt Outp ut
Te rm ina l (Y, Cb or Cr) (op tiona l m od e ls)
Connect the component output terminal on
INPUT
MONITOR OUT
AV1/DVD
your DVD player to the component video input
terminal of this product. (NOTE: When a sig-
nal of Y,Cb,Cr/Y,Pb,Pr is received, the output
signal from monitor output terminal will be cor-
responding but without colour (black and
white image).)
C
R
R
(MONO)
L
To Input Terminal CR
To Input Terminal CB
To Audio Input-R (AV1)
C
B
To Audio Input-L (AV1)
Y
To Input Terminal
Y
■
To watch a program in this connection
status, select DVD.
28
AV1
AV1(DVD)
AV2
(Optional model)
(TV mode)
■
Make sure the component video terminal (Y, Cb or Cr)
is connected correctly.
Video/DVD Player
Download from Www.Somanuals.com. All Manuals Search And Download.
15
C o nne c ting O the r Eq uip m e nt
Conne c ting to the Front AV2 Inp ut Ja c ks
Note: For monaural model TV there is no L/R audio input terminals. If the
video player is stereo, connect the Left (L) audio output terminal from
video player to audio input terminal on the monaural TV set (more details
see your video player manual book).
It is convenient to use the AV input jack on the front panel for equipment
that is often connected and disconnected.
■ To watch the Front AV2 video
input picture, select AV2
AV2
position by pressing the TV/AV
Selector.
Video/DVD Player
Conne c ting to the Monitor Outp ut Ja c ks
The picture signal being displayed on the TV screen is
output through the Monitor Output Jacks. Use these
terminals to record TV broadcasts and for video dub-
bing from AV1 or AV2 input terminals.
INPUT
MONITOR OUT
AV1/DVD
R
L
To Audio Output-R
To Audio Output-L
■ To record TV programme, select TV mode by
pressing the TV/AV Selector and record the
desired programme.
V
I
D
E
O
To Video Output
15
TV mode
To video and
audio inputs
■ To dub video from the AV1 terminal input, select
AV1 position and by pressing the TV/AV Selector.
VCR for Recording
AV1
AV Conne c tion To the Ae ria l Soc ke t
The AV apparatus can also be connected to the aerial socket of your TV receiver.
Presetting to watch the video input
PLAYBACK
1. Playback the VCR .
2. Tune a VCR playback in programme position
that you want. (See Semi-Auto Tuning and
Manual Tuning on pages 11.)
VCR for
playback
Aerial Socket
For further details concerning this connection and adjustment, refer to the operating instructions
for the AV equipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Ae ria l Conne c tion / Ca re a nd Cle a ning
Ae ria l C o nne c tio n
Conne c ting Outd oor Ae ria l
Connect the cable with a plug from a UHF (or VHF) aerial to the aerial socket on the cabinet back.
Outdoor Aerial
Aerial Cable
Aerial Socket
For all aerial circuit problems please consult your local dealer.
C a re a nd C le a ning
The surface of the cabinet can be damaged if not properly maintained. Many common household aerosol
sprays, cleaning agents, solvents and polishes will cause permanent damage to the fine surface.
1. Unplug the power cord before cleaning the Television.
2. Clean the screen with a soft cloth dampened with glass cleaner or warm water.
3. Clean the cabinet with a soft cloth dampened with a mild household detergent and warm water. Dry
thoroughly.
Note: NEVER spray liquids on the screen because they can run down and drip onto the chassis. This
may cause component failure not covered under Warranty.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Sp e c ific a tio ns
Power Source
AC127-240 Volts, 50/60Hz
Colour System
Sound System
Channel Coverage
PAL/SECAM/NTSC4.43/NTSC/PAL-60Hz
B/G, I, D/KK’, M/M
VHF: E2-E12, R1-R12, K1-K9, J1-J12, A2-A13 // 0-11, 5A (AUS), 1-11 (NZ)
UHF: 21-69, A14-A69, J13-J62 // 28-69 (AUS)
CATV: S1-S41, X, Y, Z, Z+1, Z+2
Audio output (RMS)
Model: CA14SE1(V), CP14SE1(V), CA21SE1(V), CP21SE1(V)
CA21VF1, CP21VF1, CA21VF1K, CP21VF1K, CA21CF1(V),
CP21CF1(V): 5W + 5W
Model: CA14SE1M, CP14SE1M, CA14SE1K, CP14SE1K, CA21SE1M,
CP21SE1M, CA21CF1M , CP21CF1M, CA21SE1K, CP21SE1K
: 2.5W + 2.5W
Speakers
: 5 cmx 9 cm x 2 pcs (All models)
Ext. terminals
DVD Video Component: Composite/Component Y, CB,CR input (Optional models)
Video Inputs: Phone Jack x 2 (1.0Vp-p, impedance 75 Ω)
Audio Inputs: Phone Jack (L/R) x 2 (436mVrms, impedance more than 40KΩ)
Video monitor outputs: Phone Jack x 1 (1.0Vp-p, impedance 75 Ω)
Audio monitor outputs: Phone Jack (L/R) x 1 (436mVrms, impedance less than 600Ω)
Monaural model Ext. terminals
Video inputs: Phone Jack x 2 (1.0Vp-p, impedance 75 ohm)
Audio inputs: Phone Jack x 2 (436mVrms, impedance more than 40K ohm)
Video monitor outputs: Phone Jack x 1 (1.0Vp-p, impedance 75 ohm)
Audio monitor outputs: Phone Jack x 1 (436mVrms, impedance less than 600 ohm)
Dimension:
Model CA14SE1M, CP14SE1M, CA14SE1K, CP14SE1K, CA14SE1(V),
CP14SE1(V): 433(W) x 336(H) x 359(D) mm
Model CA21SE1(V), CP21SE1(V), CA21SE1M, CP21SE1M, CA21SE1K,
CP21SE1K : 580(W) x 460(H) x 457(D) mm
Model CA21CF1M, CP21CF1M, CA21CF1(V), CP21CF1(V) : 580(W) x 460(H) x 465(D) mm
Model CA21VF1, CP21VF1, CA21VF1K, CP21VF1K : 580(W) x 460(H) x 468(D) mm
Weight:
Model CA14SE1(V), CP14SE1(V), CA14SE1K, CP14SE1K, CA14SE1M,
CP14SE1M: approx. 8.7 Kg
Model CA21SE1(V), CP21SE1(V), CA21SE1M, CP21SE1M, CA21SE1K,
CP21SE1K: approx. 19.1 Kg
Model CA21CF1M, CP21CF1M, CA21CF1(V), CP21CF1(V): approx. 20.6 Kg
Model CA21VF1, CP21VF1, CA21VF1K, CP21VF1K: approx. 20.5 Kg
Specifications subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
He lp ful Hints - Pro b le m s/ So lutio ns
Before requesting service check the following chart.
Problem:
No picture,
no sound
Check these Conditions / Try these solutions:
● Check if TV is plugged in.
● Try a different channel, if OK, probably station trouble.
● Adjust Brightness or Contrast control.
● Adjust Fine Tuning. (See page 9.)
Poor picture,
sound OK
● Check aerial connection.
● Adjust Colour or Tint control. ● Adjust Fine Tuning. (See page 9.)
No colour,
Picture OK
●
Check aerial connection.
●
Is the programme in colour ? Try a different channel.
● Select other colour system. (See Setting of the Colour System on page 8.)
● Check aerial connection on back of TV set.
Weak picture
● Check aerial for broken wires. ● Re-orient aerial.
●
Sound Mute may be on. Press the SOUND MUTE button on the remote control.
No sound or poor
sound.
● Adjust Volume. May be station trouble. Try a different channel.
●
● Select other sound system. (See Setting of the Sound System on page 8-9.)
● Check batteries. Replace batteries.
Remote Control
will not work.
● Check if TV set is plugged in. Aim remote control towards front of TV.
● Channel may be removed from memory. Add channel to memory manually.
Cannot select or
scan some channels.
(See “Skip Channel Set and Cancel” on page 12-13.)●Check aerial connection.
Blue screen with AV1
or AV1(DVD) or AV2
is displayed.
● Check AV connection. Press the TV/AV Selection button.
● Check external equipment. Switch on external equipment.
Black screen with
and programme
position displayed.
● Check to see if channel is set as the Private Position. See “Setting of the
Private Position” on page 13.
Cabinet makes
popping sound.
● This is a normal condition during warm-up and cool down of the plastic
cabinet parts.
● Keep away your TV set from magnetic source, then turn-off your TV set and
disconnect TV's power cord from AC outlet, keep this condition about 30-60
minutes and turn-on again your TV set if time is reach. If colour spot is not
disappear after this solution have done, please contact your local dealer.
Colour Spot On
The CRT
The following faults are not caused by the receiver:
“GHOSTS”
Reflections of signals from mountains or high buildings will cause multiple images, called “Ghosts”.
These abnormal conditions can be reduced to minimum by repositioning aerial or by installing new one
suited for your area.
“INTERFERENCE”
Interference may be caused by electrical appliances, car ignition systems, etc. This should normally be
a temporary condition, but should this interference persist, contact your dealer.
“SLANT”
If the picture of TV set is not properly horizontal (slant), try to change face direction of your TV set. This
case may be caused by geo-magnetic on your place where you live.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Part No. 1AA6P1P5434-D C8WE-D (AC7-A)
Download from Www.Somanuals.com. All Manuals Search And Download.
SANYO ELECTRIC Co., Ltd.
|